Search Results

Search found 62172 results on 2487 pages for 'windows networking'.

Page 37/2487 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

• Windows XP SP3 dissapearing mapped drives

  - by Alan Spark

  I am running Windows XP Pro SP3 and I've got a few shares on my NAS that are mapped to reconnect automatically. I can access the drives soon after starting windows but after a period of inactivity I get the error "The local device name is already in use". This cannot be remedied until I restart the computer - I've tried disconnecting and re-mapping without success. This was working fine until I recently reinstalled Windows and I'm not sure what is going on. Any help would be greatly appreciated. Thanks, Alan

  Read the article

• Networking conflict - What is the most common default computer name for Windows?

  - by John

  I recently had to change the name of my computer to log onto a public wi-fi spot, because a computer with my name was already logged on. (I asked a guy there what to do after it said there was already a computer named "(omitted)" logged on.) I've never been at a wifi spot you had to log into before. I didn't even notice what the computer's name was before. My question is what are the most common default computer names. I'm curious. How often does this sort of problem happen? (For some reason my previous post was closed as off topic - so now I included the reason I'm asking. If it's still considered off topic (networking conflicts) I'll take it elsewhere, but the other forums I know of (ehow.com, answers.yahoo.com) are full of people that couldn't begin to answer a question like this.) Thanks.

  Read the article

• Networking conflict - What is the most common default computer name for Windows?

  - by John

  I recently had to change the name of my computer to log onto a public wi-fi spot, because a computer with my name was already logged on. (I asked a guy there what to do after it said there was already a computer named "(omitted)" logged on.) I've never been at a wifi spot you had to log into before. I didn't even notice what the computer's name was before. My question is what are the most common default computer names. I'm curious. How often does this sort of problem happen? (For some reason my previous post was closed as off topic - so now I included the reason I'm asking. If it's still considered off topic (networking conflicts) I'll take it elsewhere, but the other forums I know of (ehow.com, answers.yahoo.com) are full of people that couldn't begin to answer a question like this.) Thanks.

  Read the article

• How to enable Integrated Load Balancing in Windows 8

  - by intodevelopment

  One of the cool new features many sites mention is "Integrated Load Balancing" in Windows 8. It is supposed to do the following: If you have multiple active network connections, Windows 8 will intelligently balance the network traffic between them for performance Source: Short: Some of what Microsoft didn’t show of Windows 8 I would love to see this feature in action. I am connected to a WiFi access point and to a different network by cable. Yet I don't see the operating system 'intelligently' balance the network load when for instance downloading multiple files. Is there any way to enable it or should I adjust my expectations?

  Read the article

• Windows Azure Learning Plan - Architecture

  - by BuckWoody

  This is one in a series of posts on a Windows Azure Learning Plan. You can find the main post here. This one deals with what an Architect needs to know about Windows Azure.   General Architectural Guidance Overview and general  information about Azure - what it is, how it works, and where you can learn more. Cloud Computing, A Crash Course for Architects (Video) http://www.msteched.com/2010/Europe/ARC202 Patterns and Practices for Cloud Development http://msdn.microsoft.com/en-us/library/ff898430.aspx Design Patterns, Anti-Patterns and Windows Azure http://blogs.msdn.com/b/ignitionshowcase/archive/2010/11/27/design-patterns-anti-patterns-and-windows-azure.aspx Application Patterns for the Cloud http://blogs.msdn.com/b/kashif/archive/2010/08/07/application-patterns-for-the-cloud.aspx Architecting Applications for High Scalability (Video) http://www.msteched.com/2010/Europe/ARC309 David Aiken on Azure Architecture Patterns (Video) http://blogs.msdn.com/b/architectsrule/archive/2010/09/09/arcast-tv-david-aiken-on-azure-architecture-patterns.aspx Cloud Application Architecture Patterns (Video) http://blogs.msdn.com/b/bobfamiliar/archive/2010/10/19/cloud-application-architecture-patterns-by-david-platt.aspx 10 Things Every Architect Needs to Know about Windows Azure http://geekswithblogs.net/iupdateable/archive/2010/10/20/slides-and-links-for-windows-azure-platform-session-at-software.aspx Key Differences Between Public and Private Clouds http://blogs.msdn.com/b/kadriu/archive/2010/10/24/key-differences-between-public-and-private-clouds.aspx Microsoft Application Platform at a Glance http://blogs.msdn.com/b/jmeier/archive/2010/10/30/microsoft-application-platform-at-a-glance.aspx Windows Azure is not just about Roles http://vikassahni.wordpress.com/2010/11/17/windows-azure-is-not-just-about-roles/ Example Application for Windows Azure http://msdn.microsoft.com/en-us/library/ff966482.aspx Implementation Guidance Practical applications for the architect to consider 5 Enterprise steps for adopting a Platform as a Service http://blogs.msdn.com/b/davidmcg/archive/2010/12/02/5-enterprise-steps-for-adopting-a-platform-as-a-service.aspx?wa=wsignin1.0 Performance-Based Scaling in Windows Azure http://msdn.microsoft.com/en-us/magazine/gg232759.aspx Windows Azure Guidance for the Development Process http://blogs.msdn.com/b/eugeniop/archive/2010/04/01/windows-azure-guidance-development-process.aspx Microsoft Developer Guidance Maps http://blogs.msdn.com/b/jmeier/archive/2010/10/04/developer-guidance-ia-at-a-glance.aspx How to Build a Hybrid On-Premise/In Cloud Application http://blogs.msdn.com/b/ignitionshowcase/archive/2010/11/09/how-to-build-a-hybrid-on-premise-in-cloud-application.aspx A Common Scenario of Multi-instances in Windows Azure http://blogs.msdn.com/b/windows-azure-support/archive/2010/11/03/a-common-scenario-of-multi_2d00_instances-in-windows-azure-.aspx Slides and Links for Windows Azure Platform Best Practices http://geekswithblogs.net/iupdateable/archive/2010/09/29/slides-and-links-for-windows-azure-platform-best-practices-for.aspx AppFabric Architecture and Deployment Topologies guide http://blogs.msdn.com/b/appfabriccat/archive/2010/09/10/appfabric-architecture-and-deployment-topologies-guide-now-available-via-microsoft-download-center.aspx Windows Azure Platform Appliance http://www.microsoft.com/windowsazure/appliance/ Integrating Cloud Technologies into Your Organization Interoperability with Open Source and other applications; business and cost decisions Interoperability Labs at Microsoft http://www.interoperabilitybridges.com/ Windows Azure Service Level Agreements http://www.microsoft.com/windowsazure/sla/

  Read the article

• How to connect the virtual networks of vmware guests running on different hosts?

  - by gyrolf

  In a test setup, we are running several virtual machines on a single vmware workstation host. All virtual machines are connected via a "host only" network. This runs fine up to 2 or 3 virtual machines (depending on the host hardware). To allow more virtual machines, we want to use more host machines. Details about the environment and applications: Host PCs are running Windows XP in a corporate intranet. VMware used is Workstation 6.5 Guests are running Windows Server 2003 All guests act as Web Servers One of the guests additionally acts as Windows File server, offering shared folders for the other guests to connect to. Restrictions: VMware guests shall not be visible from the intranet. Changes to the host PC are restricted by corporate policy. In the virtual network, no domain controller exists. All virtual machines are member of the same workgroup. Running the virtual network as NAT is possible. Port forwarding might be used if it does not conflict with ports used by the host PC. Looking for a solution, I found hints about using router or vpn software on the hosts, but without any details how to setup. (I found a similar question Sharing the network between 2 VMware hosts, but the answer was not sufficient for me.)

  Read the article

• What is going on when I can't access an SMB server share (not accessible error) until I run cmdkey to delete the credential?

  - by Warren P

  I have a network connection share issue. The first connection works, and seems to stay connected for at least a few hours. However, after each time my windows 7 PC reboots, it can no longer form a network connection to the shared folder, nor browse to it, until I not only unmap and remap the mapped drive, but also, I have to use cmdkey to delete the stored credentials like this: cmdkey /delete:Domain:target=HOSTNAME My work PC is on a domain, and I am not the IT administrator, but I'm curious if there is anything I can do to investigate this issue. Any settings in registry or group policy that I could examine to see why the first connection works, but each subsequent attempt (once a stored credential exists) to browse or use the connection, fails with a connection error saying it is "not accessible", like this: I do not even get any error until at least several minutes go by. THe first thing I see is a window frozen and empty, and then I get this error: This has happened when connecting to a share on a DROBO device, and on a share which is not on the domain, but which was a Microsoft Home Server. I wonder if there's something broken in WIndows 7 professional with regards to connecting to non-domain shares when an active directory domain controller exists, and a particular workstation is joined to a domain? The problem only occurs if I click "remember credentials". It is not fixed by any amount of working with net use. Usingcmdkey to delete all stored credentials for the host is the only way to get back in, and it affects all non-domain shared folders. Update I'm hoping there are some registry locations I could check that could be misconfigured in some way that might explain why SMB/CIFS stored credentials for non-domain systems seem to be auto-invalidated in this weird way. Knowing how whacko Microsoft Windows domain and security handling is sometimes, this could be some kind of stupid "feature".

  Read the article

• How to connect the virtual networks of vmware guests running on different hosts?

  - by gyrolf

  In a test setup, we are running several virtual machines on a single vmware workstation host. All virtual machines are connected via a "host only" network. This runs fine up to 2 or 3 virtual machines (depending on the host hardware). To allow more virtual machines, we want to use more host machines. Details about the environment and applications: Host PCs are running Windows XP in a corporate intranet. VMware used is Workstation 6.5 Guests are running Windows Server 2003 All guests act as Web Servers One of the guests additionally acts as Windows File server, offering shared folders for the other guests to connect to. Restrictions: VMware guests shall not be visible from the intranet. Changes to the host PC are restricted by corporate policy. In the virtual network, no domain controller exists. All virtual machines are member of the same workgroup. Running the virtual network as NAT is possible. Port forwarding might be used if it does not conflict with ports used by the host PC. Looking for a solution, I found hints about using router or vpn software on the hosts, but without any details how to setup. (I found a similar question Sharing the network between 2 VMware hosts, but the answer was not sufficient for me.)

  Read the article

• Use Your Favorite Wallpapers in Windows 7 Starter Edition

  - by Asian Angel

  If you have Windows 7 Starter Edition installed on your netbook, the default wallpaper can get old. If you are tired of looking at the default wallpaper, then join us today as we look at changing it with Oceanis Change Background Windows 7. Special Notes This information is quoted directly from the website and needs to be kept in mind when using Oceanis Change Background Windows 7: If the Oceanis Change Background Windows 7 program no longer works properly after installing some Windows Updates, then uninstall and reinstall the Oceanis Change Background Windows 7 program to have it run properly again. If you ever do an in-place upgrade to another higher level edition of Windows 7 in the future, then be sure to uninstall this Oceanis Change Background Windows 7 program first to avoid incompatibility issues with it in the new edition of Windows 7. It was designed to only work in Windows 7 Starter edition. Before There it is…the default wallpaper everyone with the Starter Edition gets stuck with. Some people may not mind it, but if you are one of the people who really wants something different then get ready to rejoice. After The install file for Oceanis is contained in a zip file so you will need to unzip it to get started. The install process is quick and simple but you will need to do a system restart afterwards. Once you have restarted your computer this is what your screen will look like…do not panic and think that this is all there is to it. This is just the Starter Screen and can be easily changed… Note: Oceanis will auto-start with Windows each time. Using either the Desktop Icon or the Start Menu Entry, open up the Oceanis Main Window. You will see the set of four default wallpapers shown here. At this point the best thing to do is browse for the appropriate folder where you have all of those wonderful new wallpapers just waiting to be used. Note: We found Stretch to be the best Picture Position setting on our system. For our example we had three ready and waiting. We decided to try out the Wallpaper Slideshow feature first. We chose a time frame and saved our changes. Here are our three wallpapers as they switched through. This can be much more interesting than the default wallpaper. There was only one quirk that we encountered while using the Slideshow Setting. On occasion if we minimized a non-maximized window there would be a leftover partial image in place of the window. Our suggestion? Go with one wallpaper at a time and the settings shown below. These are the settings that we had terrific luck with…Only one picture selected, Picture Position = Stretch, & Change Picture Every = Every Day. Using these settings, the Starter Edition acted just like any of the other editions with regard to wallpaper management. Conclusion If you have grown tired of looking at the default wallpaper in Windows 7 Starter Edition then you will certainly appreciate what Oceanis Change Background Windows 7 can do to fix that problem. For more ways to customize your Windows 7 Started Edition, be sure to to check out how to personalize Windows 7 Starter. Links Download Oceanis Change Background Windows 7 Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Awesome Desktop Wallpapers: The Windows 7 EditionHow To Customize Wallpaper in Windows 7 Starter EditionDesktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs Tomorrow is Mother’s Day

  Read the article

• Networking issues with Linux server (CentOS 5.3)

  - by sxanness

  I have a Linux server hosting our bug tracking software (CentOS 5.2 Kernel 2.6.18-128.4.1.el5) that I have having some strange network problems with. The machine is configured with two NICS, one for the public interface and the other for our server back end network. The problem is that after doing a service network restart I can ping the public interface and it sends anywhere from 200-500 ICMP packets and then all of a sudden I start getting a request timed out error. Strange but as soon as I connect to the private interface the ping starts working again to the public interface. I clearly have a routing issue somewhere. I have a Juniper Router with the following configuration. Interface 0/0 -- Connect subnet to the ISP at our co-location Interface 0/2 -- For our DRAC network Interface 0/3 -- The Server-backend network (plugs directly into a switch that feeds to all the NICs that are on the 10.3.20.x network. Interface 0/4 -- Plugs directly into another switch that feeds our public interfaces, that interface as all the gateways from our public ip rangs as secondary IP addresses. I hope that someone can ask the right questions that can lead me to check things and figure out what is going on. Has anyone had similar problems and what kind of things should I be checking? Routing issue or something even more complicated? [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth0 BOOTPROTO=static IPADDR=72.249.134.98 NETMASK=255.255.255.248 BROADCAST=72.249.134.103 HWADDR=00:16:3E:AA:BB:EE ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth1 BOOTPROTO=static BROADCAST=10.3.20.255 HWADDR=00:17:3E:AA:BB:EE IPADDR=10.3.20.25 NETMASK=255.255.255.0 NETWORK=10.3.20.0 ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=fogbugz.dfw.hisg-it.net GATEWAY=72.249.134.97 [root@fogbugz ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 72.249.134.96 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.3.20.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.3.20.1 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 72.249.134.97 0.0.0.0 UG 0 0 0 eth0

  Read the article

• Networking issues with Linux server (CentOS 5.3)

  - by sxanness

  I have a Linux server hosting our bug tracking software (CentOS 5.2 Kernel 2.6.18-128.4.1.el5) that I have having some strange network problems with. The machine is configured with two NICS, one for the public interface and the other for our server back end network. The problem is that after doing a service network restart I can ping the public interface and it sends anywhere from 200-500 ICMP packets and then all of a sudden I start getting a request timed out error. Strange but as soon as I connect to the private interface the ping starts working again to the public interface. I clearly have a routing issue somewhere. I have a Juniper Router with the following configuration. Interface 0/0 -- Connect subnet to the ISP at our co-location Interface 0/2 -- For our DRAC network Interface 0/3 -- The Server-backend network (plugs directly into a switch that feeds to all the NICs that are on the 10.3.20.x network. Interface 0/4 -- Plugs directly into another switch that feeds our public interfaces, that interface as all the gateways from our public ip rangs as secondary IP addresses. I hope that someone can ask the right questions that can lead me to check things and figure out what is going on. Has anyone had similar problems and what kind of things should I be checking? Routing issue or something even more complicated? [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth0 BOOTPROTO=static IPADDR=72.249.134.98 NETMASK=255.255.255.248 BROADCAST=72.249.134.103 HWADDR=00:16:3E:AA:BB:EE ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth1 BOOTPROTO=static BROADCAST=10.3.20.255 HWADDR=00:17:3E:AA:BB:EE IPADDR=10.3.20.25 NETMASK=255.255.255.0 NETWORK=10.3.20.0 ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=fogbugz.dfw.hisg-it.net GATEWAY=72.249.134.97 [root@fogbugz ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 72.249.134.96 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.3.20.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.3.20.1 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 72.249.134.97 0.0.0.0 UG 0 0 0 eth0

  Read the article

• Wireless disabled after connecting ethernet cable

  - by user1716672

  Im using Linux Mint 13. Wireless has always worked fine but stopped yesterday after I connected to the internet via an ethernet cable. I ran: sudo rfkill list gives me: 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no sudo rfkill unblock 0 sudo rfkill list gives me 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no sudo service networking start results in: networking stop/waiting The contents of /etc/network/interfaces is auto lo iface lo inet loopback Any ideas what I can do?

  Read the article

• Change the User Interface Language in Vista or Windows 7

  - by Matthew Guay

  Would you like to change the user interface language in any edition of Windows 7 or Vista on your computer?  Here’s a free app that can help you do this quickly and easily. If your native language is not the one most spoken in your area, you’ve likely purchased a PC with Windows preinstalled with a language that is difficult or impossible for you to use.  Windows 7 and Vista Ultimate include the ability to install multiple user interface languages and switch between them. However, all other editions are stuck with the language they shipped with.  With the free Vistalizator app, you can add several different interface languages to any edition of Vista or Windows 7 and easily switch between them. Note:  In this test, we used an US English copy of both Windows 7 Home Premium and Windows Vista Home Premium, and it works the same on any edition. The built-in language switching in the Ultimate Editions lets you set a user interface language for each user account, but this will only switch it for all users.  Add a User Interface Language to Windows To add an interface language to any edition of Windows 7 and Vista, first download Vistalizator (link below).  Then, from the same page, download the language pack of your choice.  The language packs are specific for each service pack of Windows, so make sure to choose the correct version and service pack you have installed. Once the downloads are finished, launch the Vistalizator program. You do not need to install it; simply run it and you’re ready to go.  Click the Add languages button to add a language to Windows. Select the user interface language pack you downloaded, and click Open. Depending on the language you selected, it may not automatically update with Windows Update when a service pack is released.  If so, you will have to remove the language pack and reinstall the new one for that service pack at that time.  Click Ok to continue. Make sure you’ve selected the correct language, and click Install language. Vistalizator will extract and install the language pack.  This took around 5 to 10 minutes in our test. Once the language pack is installed, click Yes to make it the default display language. Now, you have two languages installed in Windows.  You may be prompted to check for updates to the language pack; if so, click Update languages and Vistalizator will automatically check for and install any updates. When finished, exit Vistalizator to finish switching the language.  Click Yes to automatically reboot and apply the changes. When you computer reboots, it will show your new language, which in our test is Thai.  Here’s our Windows 7 Home Premium machine with the Thai language pack installed and running. You can even add a right to left language, such as Arabic, to Windows.  Simply repeat the steps to add another language pack.    Vistalizator was originally designed for Windows Vista, and works great with Windows 7 too.  The language packs for Vista are larger downloads than their Windows 7 counterparts.  Here’s our Vista Home Premium in English… And here’s how it looks after installing the Simplified Chinese language pack with Vistalizator. Revert to Your Original Language If you wish to return to the language that your computer shipped with, or want to switch to another language you’ve installed, run Vistalizator again.  Select the language you wish to use, and click Change language.   When you close Vistalizator, you will again be asked to reboot.  Once you’ve rebooted, you’ll see your new (or original) language ready to use.  Here’s our Windows 7 Home Premium desktop, back in it’s original English interface. Conclusion This is a great way to change your computer’s language into your own native language, and is especially useful for expatriates around the world.  Also, if you’d like to simply change or add an input language instead of changing the language throughout your computer, check out our tutorial on How to Add Keyboard Languages to XP, Vista, and Windows 7. Download Vistalizator Similar Articles Productive Geek Tips Enable Military Time in Windows 7 or VistaWhy Does My Password Expire in Windows?Use Windows Vista Aero through Remote Desktop ConnectionDisable User Account Control (UAC) the Easy Way on Win 7 or VistaAdd keyboard languages to XP, Vista, and Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

  Read the article

• What resources do you recommend for learning more about TCP/IP, networking, and related areas?

  - by mkelley33

  As a relatively-new Python programmer, I'm finding more and more that networking as it relates to the web and web development is becoming increasingly important to understand. When I was an active C# ASP.NET programmer making smaller websites with less responsibility this knowledge seemed less important, since there was often a "networking" guy performing any tasks beyond acquiring a domain name for a client. Which books, websites, presentations, articles, or other resources would you recommend so that I best understand what's happening between the time a user types a URL and receives the rendered HTML? Thanks!

  Read the article

• Install Ubuntu and erase Windows Vista

  - by miguel

  I have an older laptop with a ADA hard disk I can't really buy a new one so I want to erase Windows Vista on my computer and only have Ubuntu so that I can have more space. How do I make it go directly to my blank CD? My Windows Vista is messed up and I can't even get into it. I want to download the new version of Ubuntu while in Ubuntu. I downloaded it but it didn't go directly to the blank CD. I tried to copy all of Ubuntu onto the CD once it was downloaded but it says there was an error while copying. What should I do?

  Read the article

• Weird caching bug where old version of the same web page (same filename) is still called (Windows 2008 R2, Tomcat 5.5)

  - by user717236

  This is definitely one of the strangest errors I've seen and it occurs intermittently. I am running Windows 2008 R2, IIS 7.5, and Apache Tomcat 5.5, by the way. Let's say I have two machines, A and B. Both A and B are running Windows 2008 R2. I have a web page called login.jsp on machine A, and I have a newer, modified version of login.jsp on machine B . Now, I copy the new login.jsp from machine B and paste it to machine A, replacing the older version with the same filename. For whatever reason, when I hit up the web page in my browser from a local machine (i.e. my laptop), it still recalls the old version of the web page, even though it's been replaced! I tried restarting IIS and Apache Tomcat. That didn't work. I tried restarting machine A and that didn't work. I tried a cold reboot of my local machine and that didn't work, either. So, I spoke to someone I can confide in for help. He said to open the login.jsp page in notepad, put a space in, save the file, and try again. Sure enough, it worked. He said he hasn't seen it in Windows 2003, but this is occurring with Windows 2008. What I don't understand is why did it work and what the heck is this error and I do I really diagnose it and resolve it for good, instead of the hack my colleague proposed? Is this bug related to Windows 2008, Windows 2008 R2, Tomcat, or something else entirely? Anyone else have the same problem? Thank you for any help.

  Read the article

• Running Windows 98 in 2013 with Modern Apps and Web

  - by Akemi Iwaya

  Do you ever have those moments when curiosity for the sake of fun gets a hold on you? Perhaps that curiosity gets focused on computer-related “what ifs” such as how well would a very old operating system handle being used with today’s modern apps and web? Nazmus Shakib Khandaker decided to find out how well Windows 98 could and would do in 2013. Have you tried something similar to this? Do you know of any individuals who are holding on to an older operating system no matter what? Share your experiences in the comments! Running Windows 98 in 2013 with Modern Web and Apps [YouTube]     

  Read the article

• Installing .NET Framework 4 Client Profile breaks Windows Update

  - by Richard

  I have a Samsung NC-10 netbook with a fresh install of Windows 7 Home Premium 32-bit (it only had 2GB). If Microsoft .NET Framework 4 Client Profile is installed on it, Windows Update will always return error code 8024402F ("Windows Update encountered an unknown error"). As soon as I uninstall it, Windows Update works just fine again. Out of the four computers in this house, only this netbook has the problem. My question is: How can I get the .NET Framework 4 Client Profile installed on my netbook and continue to have a functioning Windows Update? ----- More information ----- The hard-drive recently died on my netbook so I replaced it with a nice new SSD and did a fresh installation of Windows 7 Home Premium (SP1) - along with all the updates. At some point I found that, when I ran Windows Update, I was greeted with error code 8024402F ("Windows Update encountered an unknown error"). Looking in C:\Windows\WindowsUpdate.log, I saw the following issue: WARNING: ECP: Failed to validate cab file digest downloaded from http://download.windowsupdate.com/msdownload/update/software/dflt/2012/02/4913552_4a5c9563d1f58c77f30d0d5c9999e4b8bff3ab21.cab with error 0x80091007 WARNING: ECP: This roundtrip contained some optimized updates which failed. New Update count = 0, Old Count = 3 FATAL: ProcessCoreMetadata did not return any update to be committed WARNING: Sync of Updates: 0x8024402f WARNING: SyncServerUpdatesInternal failed: 0x8024402f When I downloaded the CAB from the URL listed and opened it, it contained a file called 4913552.txt. A search on Google suggested that it's related to Microsoft .NET Framework 4 Client Profile. Other people had reported problems with it breaking Windows Update, but they were running Windows XP. I tried the steps outlined on the Microsoft site for this error code, but it reported that there was nothing wrong. I also found this superuser question, I tried all the answers listed but none of them made any difference. My router doesn't block ActiveX, changing my internet settings in IE made no difference, assuming it was a corrupted update repository didn't do anything (except wipe my update history), my date and time was correct, switching to Google's DNS didn't work and neither did disabling IPv6. Figuring that this update was corrupted, I repaired it and nothing changed. In desperation I un-installed it and Windows Update started working again! Brilliant! I then downloaded the full version from the Microsoft website, installed it and, thankfully, Windows Update continued to work just fine. A week later I turn on my netbook and Windows Update is broken again with exactly the same error message and log entries as before. Repairing .NET Framework 4 Client Profile did nothing, removing it entirely solved the problem again. Thinking this might be some odd Windows installation issue, I formatted the hard-drive and re-installed Windows. Same problem as before - as soon as .NET Framework 4 Client Profile ended up on the netbook, Windows Update stopped working and reported error 8024402F. As soon as it was un-installed, everything worked just fine again. There are three other machines in this house and all of them have working Windows Update and this Client Profile. Does anyone know why it causes this netbook to break and, more importantly, how I can fix it?

  Read the article

• Setting Windows 7's Recycle Bin to automatically have a default disk space allocation for deleted files from newly mounted drives

  - by galacticninja

  How do I set Windows 7's Recycle Bin to automatically have a default disk space allocation for deleted files from external hard drives and TrueCrypt-mounted volumes? I remember in Windows XP, I can set a percentage of total disk space that will automatically be used as storage capacity for deleted files by the Recycle Bin, and this will be applied to all external HDs or TC-mounted volumes. Windows 7 defaults to the 'Don't move files to the Recycle Bin. Remove files immediately when deleted' setting for newly mounted external HDs and TC mounted volumes. Since I am expecting deleted files to go to the Recycle Bin, sometimes this causes an 'Oops' when I delete files in external hard drives or TC mounted volumes, as Windows does not move deleted files to the Recycle Bin, but just deletes the files permanently. I have to remember to manually set a custom Recycle Bin storage space for each new drive that is mounted by Windows to avoid this issue. I only use and mount TrueCrypt file containers, not drives. I also don't mount TrueCrypt file containers as removable drives. ('Mount volume as removable medium' is unchecked in Mount Options.) In my $Recycle.Bin > Properties > Security settings, 'System' and 'Administrators' are already set to 'Full Control', while 'Users' only have 'Special Permissions' checked in gray. There are no other groups. I haven't changed or edited anything in these settings. I am using Windows 7 Ultimate.

  Read the article

• Can't VNC into my OSX machine from my Windows machine

  - by KeyStroke

  Hi, I'm trying to access my OSX (snow leopard) machine from my Windows 7 machine. Both machines are within my local network I don't need outside access. I'm using Vine Server (OSXvnc) for OSX and TightVNC Viewer for Windows, but TightVNC keeps telling me that the host is unreachable. Any idea what could be wrong? how could I troubleshoot this kind of issue? Appreciate your help.

  Read the article

• Windows Virtual Machine not seen by host (Mac OS X) using VMWare Fusion

  - by Malkuth

  Hi, I installed Windows XP with VMware Fusion on my MacBook and while internet works, Windows can ping the Mac, etc. from the Mac or any other machine in the network we can not see the Virtual Machine. In between, I use bridged option and obtain the the VM's IP dynamically; tried also static assignment from the free addresses but the problem persisted. Any ideas what is wrong?

  Read the article

• Network transfer from host to VM very slow - VMWare Server & Windows 2003 Server

  - by barfoon

  Hey everyone, Im trying to transfer a file from a Windows 7 host running VMWare Server to a Windows 2003 server VM, and it's painfully slow. I've tried adding/adjusting registry keys and settings found on KB articles, and still nothing. Ive tried this: http://support.microsoft.com/kb/898468 http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1619 Vmware tools are installed. Any ideas? Thanks,

  Read the article

• How Windows Server routes PTP v2 unicast messages?

  - by Bobb

  If my server is placed in PTP v2 enabled network which has grand master clock. And the switch is PTP aware. The server is W2008R2 (soon to be W2012). I also have PTP v2 software client. How does the master clock messages are getting on with Windows Server? Does it need special PTP-aware NIC or it will be treated as normal networking traffic and the software receives it through regular NIC no problem?

  Read the article

• Windows Server 2003 port forwarding

  - by Vitor Braga

  Using the "netsh interface portproxy" I added a port forwarding to a Windows Server 2k3. The command "netsh interface portproxy show all" shows the added forwarding. On the other hand, any client connecting to the incoming port will receive a "connection refused" message. netstat also doesn't show the incoming port as listening. The machine firewall is disabled. There is any other way to setup port forwarding on Windows or debugging tips?

  Read the article

• Does WCN (Windows Connect Now) work on Windows 7?

  - by WilliamKF

  I'm trying to add a Canon printer wirelessly and I can't just enter the WEP settings, I'm forced to use this WCN which is says is in Vista, but I'm not finding it on Windows 7. Where can I find this in Windows 7?

  Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >