Search Results

Search found 9758 results on 391 pages for 'wireless networking'.

Page 37/391 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

  • How do I select Wireless radio portions in Ubuntu?

    - by Ryan McClure
    Bear with me, to be honest I have no idea what Wireless radio portions are.... At my school, I was told my the user support that the wireless network in my dorm uses 801.11 A/B/G/N. For some reason, the wireless in my room doesn't work. However, other buildings use only A/B/G, they say. In any other building, my wireless works fine. How do I tell my system to use the G portion only? (As requested by user support in the email I received). Here are the various logs/output requested: dmesg lshw -c network lsmod

    Read the article

  • How can I get wireless working on an HP-Mini 110-3150?

    - by jfmessier
    I just got an HP Mini 110-3150, and booting from an external hard disk with Ubuntu 10.10 works all fine, except that there is no wireless detected. I noticed that the Wireless indicator is red under Ubuntu, but is enabled under whatever Windows 7 I got on it. So, I understand that it may not get detected at all by Ubuntu at startup time, and there is no manual switch that I can simply slide to turn on/off. How can I get the Wireless device turned ON by default at startup time, and is there any special driver I need to install (proprietary or not) to get it working ? Merci :-) Update: When actually installing on the computer, as a new install, the NIC is not detected at first, but upon restarting, I get a notification of a closed driver available for the wireless. Once installed, updated and restarted, it works fine.

    Read the article

  • Wireless USB devices compatible with Windows 7 64-bit

    - by BrynJ
    I want to upgrade my Vista 64-bit edition to Windows 7 64-bit, so I've installed and run the Windows 7 Compatibility Test. The only item that is being highlighted as incompatible is my Zyxel G-202 wireless usb network device. Does anyone know of a wireless USB device that is compatible with Windows 7 64-bit?

    Read the article

  • How can I make NetworkManager ignore my wireless card?

    - by ændrük
    I do not want NetworkManager to list or manipulate my wireless card. Can I hide its interface from NetworkManager somehow? I have tried adding this in /etc/network/interfaces, iface wlan0 inet static address 192.168.1.101 netmask 255.255.255.0 gateway 192.168.1.1 wireless-essid Synaptotagmin pre-up wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf post-down killall -q wpa_supplicant and this in /etc/NetworkManager/nm-system-settings.conf, [keyfile] unmanaged-devices=/org/freedesktop/Hal/devices/net_00_19_e0_57_86_af but NetworkManager Applet still lists and allows me to connect to wireless networks.

    Read the article

  • How do I disable the "enable/disable wireless" shortcut key on my laptop?

    - by Matthew
    On my Dell Studio XPS 16, I sometimes accidentally hit this key. Wireless becomes disabled, and hitting it again does not re-enable wireless. I have to hit it an odd number of times, then restart my computer to re-enable wireless. I can't imagine a situation in which I would want to disable wireless from my keyboard. Is it possible just disable the key all-together, so I can avoid this problem? On a related note, what package do I file the bug against? I'm happy just disabling the key, but that's really just a workaround.

    Read the article

  • How do I get my Lenovo T61 to connect to a wireless network?

    - by Ross Fleming
    I have a Lenovo Thinkpad T61 and the wireless works just fine so I installed Ubuntu straight away only to find that the wireless will not connect, it will see the networks but just not connect. Has anyone managed to solve this all the forums seem to relate to Ubuntu 9.04 and before. Edit:Sorry about that, I didn't realise that there were 2 models mine is the Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection. Any help is much appreciated.

    Read the article

  • How can I make NetworkManager ignore my wireless card?

    - by ændrük
    I do not want NetworkManager to list or manipulate my wireless card. Can I hide its interface from NetworkManager somehow? I have tried adding this in /etc/network/interfaces, iface wlan0 inet static address 192.168.1.101 netmask 255.255.255.0 gateway 192.168.1.1 wireless-essid Synaptotagmin pre-up wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf post-down killall -q wpa_supplicant and this in /etc/NetworkManager/nm-system-settings.conf, [main] plugins=ifupdown,keyfile [ifupdown] managed=false [keyfile] unmanaged-devices=/org/freedesktop/Hal/devices/net_00_19_e0_57_86_af but NetworkManager Applet still lists and allows me to connect to wireless networks.

    Read the article

  • How well does an INCA IM-201W Wireless work?

    - by Eray
    I'm using Ubuntu 11.04 . I'll buy a wireless modem, Inca IM-201W . But i'm looking supported OS of modem : Windows XP , Vista, 7 . There isn't Ubuntu in list.SO what's the meaning of this ? Shouldn't I buy this modem ? I will use wireless connection. (PS. Sometimes, while i'm trying to connect a Wireless network on any cafe, i'm having problem. My laptop isn't connecting to wireless networks sometimes . )

    Read the article

  • Wireless Disabled:HardBlock

    - by wisdom
    Really I don't know where can I solve my problem.....I'm searching for ages everyone has solved it but me not yet ! It's Wireless HardBlock problem... I posted this question when I was using ubuntu 11.10 on askubuntu and no hope ! here are some solved problems which I tried but mine not solved ! (1,2,3) I'm using now Fedora17 beside Xubuntu where no problem with wireless card ! Anyone can give me hope to solve it ? thanks in advanced

    Read the article

  • Can realtek 8192cu usb wireless card be used in ubuntu 12.04 with kernel 3.2.0?

    - by waterloo2005
    I do like the post RTL8188CUS Wireless USB Dongle doesn't work unless I disable wireless security . But when I plug my 8192cu usb wireless card, my computer screen is off. At that time I even can not use Alt SysRq k or Alt SysRq + reisub. I compile the latest driver of 8192cu on ubuntu 12.04 with kernel 3.2.0-34. In RealTek site, I download 8192cu drive which is for Linux Kernel 2.6.18~2.6.38 and Kernel 3.0.8. But now in Ubuntu12.04 my kernel is 3.2.0-34. Every time I plug the usb 8192cu wireless card my system halts. Now I try to blacklist both the system's rtl8192cu driver and the new 8192cu driver I compile, but the system still halts when I plug the usb driver. What about you ? Thanks!

    Read the article

  • Why doesn't wireless work on Wubi 12.04 with a Broadcom BCM4312 card?

    - by Kristin
    I have recently set up ubuntu 12.04 on my laptop using the Wubi installer. I am having a very difficult time setting up a wireless internet connection. I am currently set up with an ethernet connection which I have used to download all new updates and to activate the Broadcom STA wireless driver. I have tried several things in the terminal based on other people's posts: ~$ rfkill list 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes ~$ rfkill unblock all It doesn't change anything. I also tried rebooting and connecting to the internet on my Windows Vista OS, and it worked, so I know that the connection should not be hard blocked. I have also tried installing b43 firmware (lp/phy version) that is supposed to work with my chip (BCM4312). It seems to have no effect. Then I tried: ~$ iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. This is my first time trying to work with ubuntu, so I would appreciate any help. Thanks. Also sorry this is poorly formatted. I'm having troubles with that too.

    Read the article

  • Wireless doesn't work for me in Lubuntu but does in Puppy?

    - by user54871
    I am new to GNU Linux. I have been having trouble getting wireless working on my installed system of Lubuntu 11.10. It sees my WPA network but cannot connect even when I remove the password. Looking around for a different distro that might replace it, I was amazed to find that Puppy was able to connect to my wireless network without trouble, running off a USB stick. So this makes me think that my Lubuntu wireless problem might be fixable so I don't have to have the major hassle of backing up all my documents etc before installing a different distro to the laptop. Can anyone suggest some steps that might help me to fix wireless on Lubuntu, perhaps using the fact it works with Puppy? Thanks. Rob

    Read the article

  • Wireless (Broadcom) just stopped working after putting machine to sleep!

    - by tommed
    Had the wireless working on my Dell Studio 15 for months now (Ubuntu 10.04 64bit, now 10.10 64bit). But I shut the lid this morning, which put the machine to sleep; when I openend it again the wireless would no longer connect to anything :'( I rebooted the machine, but that didn't help. I then did ifconfig eth1 {down,up}, but that didn't help, then I did iwconfig eth1 power {down,on}, but that didn't work. So I uninstalled the wireless driver (Broadcom STA) from additional drivers (reboot in the middle), but it still won't work anymore!! This is the trace from daemon.log, looks like it is a driver issue? Nov 28 12:26:39 ulap NetworkManager[1218]: (eth1): supplicant connection state: disconnected - scanning Nov 28 12:26:39 ulap NetworkManager[1218]: (eth1): supplicant connection state: scanning - disconnected Nov 28 12:26:45 ulap NetworkManager[1218]: (eth1): supplicant connection state: disconnected - scanning Nov 28 12:26:50 ulap wpa_supplicant[1295]: Trying to associate with MY_MAC_CODE (SSID='MY_WIRESS_SSID' freq=2417 MHz) Nov 28 12:26:50 ulap wpa_supplicant[1295]: Association request to the driver failed Nov 28 12:26:50 ulap NetworkManager[1218]: (eth1): supplicant connection state: scanning - associating Nov 28 12:26:51 ulap wpa_supplicant[1295]: Associated with MY_MAC_CODE Nov 28 12:26:51 ulap NetworkManager[1218]: (eth1): supplicant connection state: associating - associated Nov 28 12:27:01 ulap wpa_supplicant[1295]: Authentication with MY_MAC_CODE timed out. Nov 28 12:27:01 ulap NetworkManager[1218]: (eth1): supplicant connection state: associated - disconnected Anyone seen this, or know how I can get around this issue? It had been working fine up until now?! Even ran update-manager, but there wasn't any changes to the wireless drivers (or any related networking areas). Running the most up-to-date version of 10.10 x64. My android phone and other devices are still working on the wireless.

    Read the article

  • How do I enable wireless on HP Pavilion dm1?

    - by Dikla
    My wireless network is physically enabled and the "enable wireless" appears properly on the top menu, however checking it doesn't seem to have any affect. Anyone came across this problem? I have a new HP Pavilion dm1-4000, installed Ubuntu 11.10 yesterday. The wireless worked fine yesterday, today I've got nothing. It also seems to have problems with the wired connection, however I have no idea if it's related.

    Read the article

  • Cannot enable wireless Ubuntu 10.04

    - by woaddoa
    I have recently installed Ubuntu 10.04, however I am having trouble getting wireless to work. Ubuntu says that wireless is disabled, and I am unable to enable it. I have tried Administration Hardware Drivers however the only drivers listed are Nivida graphics ones. I am unsure what to do as I do not think the process is the same as searching for drivers for a windows machine. Any advice appreciated.

    Read the article

  • Some web pages won't download fully

    - by Sumac
    Some web pages won't download fully under any browser on any computer connected to the network. I have Internet access through a wireless modem/router (2 Mbps DSL connection, wireless reception is excellent). I use Opera and when I turn on Opera turbo the same sites download fully. I tried changing to some other dns (opendns, google dns), but it made no difference. What would you suggest I try? OS : Windows 7 64 bit

    Read the article

  • Unable to get wireless card working properly in DELL D620 laptop - Zorin OS 6.0 (3.2.0)

    - by ElliTech
    I have a DELL D620 laptop running Zorin OS 6.0 (3.2.0) The wireless was working prior to running Update Manager. Here is the output from some commands: dell@dell-lt:/$ rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no dell@dell-lt:/$ iwconfig lo no wireless extensions. eth0 no wireless extensions. dell@dell-lt:/$ ifconfig -a eth0 Link encap:Ethernet HWaddr 00:18:8b:d4:d8:2f inet addr:192.168.1.74 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::218:8bff:fed4:d82f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22227 errors:0 dropped:0 overruns:0 frame:0 TX packets:15027 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26452734 (26.4 MB) TX bytes:1708955 (1.7 MB) Interrupt:18 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) I am at a loss as to how to get the wireless working!!! ElliTech

    Read the article

  • Can't detect wireless networks, running ubuntu 9.10 on eeepc 1000he

    - by David Brown
    Hi, I am running Ubuntu 9.10 on an ASUS eeepc 1000HE, and my wireless card, RaLink RT 2860, is failing to recognize any wireless networks. It was working fine this morning, until I accidentally hit Fn F2, disabling the wireless card. I hit Fn F2 again to reenable it, but it no longer will detect any wireless networks (and other computers in the household do recognize them). Any help at all will be greatly appreciated! I googled quite a bit and talked to a human about this but could not fix it. We tried dhclient ra0, which returned There is already a pid file /var/run/dhclient.pid with pid 2438 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.2 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/ra0/00:25:d3:13:f4:20 Sending on LPF/ra0/00:25:d3:13:f4:20 Sending on Socket/fallback DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 6 No DHCPOFFERS received. No working leases in persistent database - sleeping. Other data: iwconfig returns (other stuff here...) ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA" Mode:Auto Frequency=2.412 GHz Bit Rate=1 Mb/s RTS thr:off Fragment thr:off Link Quality=10/100 Signal level:0 dBm Noise level:-87 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ifconfig returns (other stuff here...) ra0 Link encap:Ethernet HWaddr 00:25:d3:13:f4:20 inet6 addr: fe80::225:d3ff:fe13:f420/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:583 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:19 ra0:avahi Link encap:Ethernet HWaddr 00:25:d3:13:f4:20 inet addr:169.254.7.117 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 Interrupt:19

    Read the article

  • Is there a social networking protocol

    - by Marwan
    Social networking is great, but there is something fundamentally wrong with the way social networking is implemented today in most popular services. I'll put it in this example: Imagine that there is no SMTP, and consequently, it is globally assumed and accepted that you can only send email to addresses on the same domain. The result would be the emergence of a single email service, let's call it emailbook.com, which we all have to subscribe to, if we really want to communicate with the world. This is what's happening with social networking today. You HAVE to use the same service your fiends/colleagues are using to talk to them. I would like to be able to put up my own social site, invite my friends who trust me, share amongst us, but still be able to share with the world at large. What are the chances of this scenario happening in the future? What does it take?

    Read the article

  • Authentication required by wireless network.

    - by Roman
    I would like to use a wireless network from Ubuntu. In the network drop-down menu I select a network (this is a University network I have an account there). Then I get a windows with the following fields: Wireless Security: [WPA&WPA2 Enterprise] Authentication: [Tunneled TLS] Anonymous Identity: [] CA Certificate: [(None)] Inner Authentication: [some letters] User Name: [] Password: [] I put there my user name and password and do not change default value and leave "Anonymous Identity"blank. As a result of that I get "Authentication required by wireless network". How can I solve this problem? I think it is important to notice that our system administrator tried to find some files (which are probably needed to be used as "CA Certificate"). He said that he does not know where this file is located on Ubuntu (he support only Windows). So, probably this is direction I need to go. I need to find this file. But may be I am wrong. May be something else needs to be done. Could you pleas help me with that?

    Read the article

  • Instant connection to wireless network but delayed internet access on Mediacom with Windows 7

    - by David
    I have Mediacom cable internet and their provided modem/wireless router a Cisco DPC3825. Each of the laptops experiencing the trouble have Windows 7 64-bit. When connecting to the wireless network each computer will take a second or two to connect and then toggle from "no internet access" to "internet access" however, no websites are accessible for about five minutes after connecting. After that, there aren't any problems. It happens on all 3 of the laptops I have available and none of them have problems on any other network. It seems like my phone doesn't have the delay issue when it connects. I've power cycled the modem/router along with a DNS flush. I have some of the DNS servers manually set to Google DNS addresses and one just default. I've contacted and had Mediacom support try all its tricks. They changed the SSID and password along with resetting the thing remotely a handful of times. It was installed just this month and seemed to pass the tech's checks upon installation. Nothing in the settings has been changed, but it's been exhibiting this problem from the get go. This guy seems to be having the same problem, but no solution was posted. http://www.dslreports.com/forum/r27372861-IA-Connection-to-Mediacom-wireless-Modem-no-internet- Help greatly appreciated.

    Read the article

  • Connecting to unsecured wireless network

    - by Sanchez
    I would like to know what information is public and can be intercepted in a non-open, but unsecured wireless network. Moreover, is there anything I can do to make it more "secure", other than using https connection whenever possible. In more details, I recently discovered (with surprise) that the wireless network in my school is actually unsecured. Although not everyone can connect to it (you need a student ID), I am told that certain softwares like Wireshark would be able to intercept the data. Since I have been using the network for all private purposes (email, facebook etc), I do feel quite insecure now and would like to understand the situation a bit better. I installed Wireshark and tried to play with it but all I can see are something alien to me. In any case, all I see seems to come directly/indirectly from my IP address, and I have long thought that usually different computers in the same wireless network would be assigned different addresses. Am I wrong? If not, then I feel very confused about what information is actually being captured (potentially by other users in the network, since I don't think I could capture activities of others in the same network anyway), and whether it's safe to use the network at all. (Gambling on others in the same network showing good behaviour is apparently not an option.) Thank you.

    Read the article

  • Authentication required by wireless network

    - by Roman
    I would like to use a wireless network from Ubuntu. In the network drop-down menu I select a network (this is a University network I have an account there). Then I get a windows with the following fields: Wireless Security: [WPA&WPA2 Enterprise] Authentication: [Tunneled TLS] Anonymous Identity: [] CA Certificate: [(None)] Inner Authentication: [some letters] User Name: [] Password: [] I put there my user name and password and do not change default value and leave "Anonymous Identity"blank. As a result of that I get "Authentication required by wireless network". How can I solve this problem? I think it is important to notice that our system administrator tried to find some files (which are probably needed to be used as "CA Certificate"). He said that he does not know where this file is located on Ubuntu (he support only Windows). So, probably this is direction I need to go. I need to find this file. But may be I am wrong. May be something else needs to be done. Could you pleas help me with that?

    Read the article

  • Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks

    - by A302
    Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

    Read the article

  • DLINK WBR-1310B Wireless Router seems to hang...

    - by Ira Baxter
    I have a brand new DLINK-1310B Wireless Router (box never before opened, although I bought it the neighborhood computer junk store). I am using it at home (and in fact am using it this instant from a wireless laptop). When operative, I can ping it at 192.168.0.1, and I can log into it from the PC attached to by LAN and from the wireless PC at //192.168.0.1. In the course of the day since I've installed, it seems to have locked up 3 times. Each time the symptoms are my web browser (or other internet service) stops with a "No internet connection" error. Attempts to contact the router via 192.168.0.1 get no reaction, from either the wireless laptop or from the hardwired PC sitting next to it. It doesn't respond to pings to that address either. Rebooting fixes it. Its brand new. I've seen discussion in other questions about aging cheap electronics. Its too new to be aged. Anyboyd else seen this behavior with a DLINK-1310? Or do I just need to exchange it for another and try again? (I hate rolling dice, I bought the DLINK becuase a previous Linksys died of apparant heating problems). Remarkably, nobody talks about how much software is in a router. Is the stuff just buggy?

    Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >