Search Results

Search found 12753 results on 511 pages for 'small'.

Page 370/511 | < Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >

  • SharePoint extranet security concerns, am I right to be worried?

    - by LukeR
    We are currently running MOSS 2007 internally, and have been doing so for about 12 months with no major issues. There has now been a request from management to provide access from the internet for small groups (initially) which are comprised of members from other Community Organisations like ours. Committees and the like. My first reaction was not joy when presented with this request, however I'd like to make sure the apprehension is warranted. I have read a few docs on TechNet about security hardening with regard to SharePoint, but I'm interested to know what others have done. I've spoken with another organisation who has already implemented something similar, and they have essentially port-forwarded from the internet to their internal production MOSS server. I don't really like the sound of this. Is it adviseable/necessary to run a DMZ type configuration, with a separate web front-end on a contained network segment? Does that even offer me any greater security than their setup? Some of the configurations from a TechNet doc aren't really feasible, given our current network budget. I've already made my concerns known to management, but it appears it will go ahead in some form or another. I'm tempted to run a completely isolated, seperate install just for these types of users. Should I even be concerned about it? Any thoughts, comments would be most welcomed at this point.

    Read the article

  • Intermittent 5.7.1 email bounce to Exchange 2007

    - by Steve Kennaird
    My knowledge of Exchange isn't particularly great, so excuse me if some of the terminology I use isn't quite right. I'm primarily a web developer who's now responsible for a small business's network. We have a server running SBS 2008 and Exchange 2007. Generally, everything works well, emails are able to be sent to both internal and external domains without issue. We've only got ~20 users, Exchange is sitting on a single server. I use SendGrid to send emails generated by our externally hosted website to users in the office. Primarily, order notifications are sent to [email protected]. Without any pattern and less than once per week on average, an email to [email protected] will bounce back, and the logs on SendGrid detail the following error: 550 5.7.1 Unable to relay for [email protected] Either side of that failed delivery attempt, I'm able to send and receive emails to/from [email protected]. Having done some research, incorrect reverse DNS seems like it could be a cause of intermittent bounces like this. Having used nslookup, I have found that the reverse DNS doesn't map like it should, e.g. Office IP: 135.325.351.123 (made up IP, for example only) Domain: office.somedomain.com (made up, for example only) Reverse DNS: somedomain.gotadsl.co.uk (half made up) Could this be a cause? I'm sure that the IP address and the domain should map to each other. Also, it has been suggested to me that as the Exchange server is on a network with an ADSL connection, that could be a potential cause as the connection "goes up and down all day long". I don't have an opinion on this, as I don't have enough knowledge of Exchange/ADSL to form a reliable opinion. Can anyone offer any insight as to whether one or both are actually potential causes, or if there is another possible cause?

    Read the article

  • Few questions about a good projector on my PC and tv?

    - by jasondavis
    I have always wanted a projector for my tv, satelite, cable, and even PC in a spare bedroom. Well it's more of a home office that I spend most my time in and the catch here is it is a small room. Room is only the standard 8foot tall. Room is about 13 feet wide on the wall where I would like to mount the project and the wall where the screen would be for it. So only about 13 feet away from projector to screen. I would like to know... 1) From experience or knowledge what would be a good projector I could hook up to my satelite box and also my PC? Cheaper is better in this case but I would still like the best image for my buck and something reliable. There is no sunlight in the room either to worry about. 2) From that distance of about 12-13 feet away, how big of a clear picture could I expect? 3) What kind of cables would I need to purchase and run through my attic to my cable/satelite receiver box as well as my PC? 4) These cables in question 3 would most likely need to be a good 15-20feet in length to reach, would I need anything special for that to work at those distances?

    Read the article

  • Are there any tests I can run on a network to simulate 100 heavy network users?

    - by marc.gayle
    I will be hosting a Ruby on Rails workshop at a small hotel in the near future, and while they have 'Wifi' everywhere on the property, and the property normally hosts 150 - 300 people, I am not 100% confident that they have hosted 150 tech people that tend to have heavy web surfing habits/needs. Their tech department is also 1 or 2 guys. Are there any automated tests I can download and run from my laptop, on the network, that would simulate 100 'heavy users' on the network at the same time? Their broadband pipe is a 15mbps cable connection. Would that suffice for the general surfing needs of 100 - 150 techies? I know all it takes is 1 or 2 bit torrenters to kill the entire network, but assuming we can at the very least block those ports or encourage the attendees not to file share on the network, would that speed suffice for general surfing needs? What are good resources online that would allow me to quickly get up to speed on the IT related issues, so that I can ask their sysadmins the right questions? Edit: Note that I am fairly technical, so assume I can get up to speed quickly even with technical manuals, etc.

    Read the article

  • My home box as my own host?

    - by Majid
    Hi all, I have a 512 kb/s DSL service at home. I do not have a static IP but I can get one if I pay some extra to my ISP. Now, if I get the static IP, can I make my home box act as my internet host? What else do I need? Thanks P.S. I know that if at all possible, the site I make available this way might be slow, that is alright, my question is if it is possible at all. Edit: I need this for very small traffic. I am a php developer and for my projects I am often asked to provide a demo. I currently use a free hosting for this purpose but it is down most of the time and support is non-existent. So I thought to set-up my home computer as my test server. With this please note that: I will only occasionally have 'visitors' and that will be one or possibly two visitors at any time. These demos, are to showcase functionality, so no big images are served and page views will normally generate under 100KB of traffic.

    Read the article

  • How do I prevent spawning of zombie-like apache2 processes on Dreamhost VPS?

    - by Jonathan Hayward
    I have had a website for months or longer on a DreamHost VPS, and I have had vague memories on, in initial setup, having to turn off some customized Apache under /dh to get a standard Apache 2.x to work with. Things have been going along on an even keel, when I started making some changes lately and I found that when I tried to bounce Apache (/usr/sbin/apachectl restart), it couldn't bind to port 80, and my site had been converted from a big literature site to a small parking site. I tried to see what was listening on 80, and it was a DreamHost-customized Apache that had spawned. I killed all of them, restarted Apache, and changed the parent directory under /dh to mode 000. That was a day or two ago. I was bouncing Apache again in trying to get a new site to load under HTTPS, and I found that once again DreamHost's apache had spawned, from the directory I set to mode 000, and once again converted my site to a parking page. I renamed the directory, but I am very skeptical of whether I have permanently killed the DreamHost-customized Apache. Besides duct tape options like a crontab to kill and delete each minute, how can I permanently turn off the Apache processes that are spawning from a location under /dh and interfering with standard Apache? What should I be doing that I am not? Can DreamHost's technical support stop the interference? Thanks,

    Read the article

  • Install and enforce a scheduled task across a Windows domain

    - by Ricket
    We have a small domain of about 70 Windows computers (XP and 7). We want to schedule a command (an update mechanism) to run on all computers periodically, and we want the task to run regardless of the computer's connection to our network (i.e. the task should run even on a laptop that isn't connected to our VPN). We have a Microsoft System Center Essentials 2010 server so that might come in handy. The options I see are these: Do it completely manually. Install the scheduled task by hand or remotely using psexec (and the at command?) for each computer in our network. Enforce that newly imaged computers should have this task installed on them before deployed to the employee, or the task should be in the image. High initial cost (having to do this for each of 70 computers) but building it into the image might work... But there is some maintenance in making sure the task is added to everything. And I fear that a year or two down the road, we will have forgotten about it or gotten sloppy or had new IT employees who miss this step and some computers won't have the task. Having one of our servers run a script that loops through all computers and psexec's the command on each computer in the network -- it would only run on running, connected computers, so this solution wouldn't work. I suspect SCE could do something like this too, but again this is not a good solution. Neither of these are ideal, and I'm certain there is a better way to do it -- right? What is the best way to accomplish this task?

    Read the article

  • Tridion 2011 SP1 Core Service - expose to live server within PROD env

    - by Neil
    We have a requirement to allow our users to submit information about their "projects" - a small piece of text and single image they upload. Ultimately we'll have a listing page of user contributed projects that others can comment on and rate. We've decided to user Tridion's UGC for rating & comments site-wide for this first phase which has got me thinking - UGC is tied to Tridion published pages & components, if we want UGC on our user-submitted projects, they'll have to be created within Tridion as components themselves, not be sat in some custom db table? Is this where the Core Service could come in? My understanding is that the CD Web Service is for retrieval, not for interacting with the Content Manager. Is it OK (!) architecturally to expose the Core Service only to our live application servers so our backend .NET code can create "project components" that can be then be published by editors allowing them to be commented on? Everything sounds pretty neat and tidy apart from the "exposing Core Service to live servers" bit. Without this though I'd have to write a custom way to "transfer" it back over to the Content Manager - maybe like Audience Manager Sync works? Anyone done this before?

    Read the article

  • How can I copy this quote from PDF?

    - by isme
    I'm reading a PDF copy of Jerome H. Friedman's paper "Data Mining and Statistics: What's the Connection?" using Google Chrome and the Adobe Reader plugin. It contains an amusing quote that I want to copy and paste to my blog. I used the mouse to select the text of the quote and pressed CTRL + C to copy the text. The document looks like this: When I paste the text into Notepad, Stack Overflow, or anywhere else, the product is Wingdings-like gibberish: ????????????????????????|?????????|????? ?????|??????????????????????????????????????????????????|?????????????? ??????????????P????? ?????????????????????P?|?????????|?????????????????????????????????????????????????????? ????????????Þ?????????????????????????????????|???|??????????????????????????? The text should instead look like this: A difference between statisticians and computer scientists in this field seems to be that when a statistician has an idea he or she writes a paper; a computer scientist starts a company. I had to type that text out manually. This is feasible for such a small quote, but how do I actually copy what I see? Is it something unusual about the PDF, the browser, the plugin, or some combiniation of the three?

    Read the article

  • SSH session becomes unresponsive when logged into Ubuntu Server virtual machine using VirtualBox

    - by nickbart
    Hi everyone, I'm really at my wits end here, so I'm hoping someone here can help me. I have a virtual machine running Ubuntu Server 9.10. It's just a small development environment so I can keep my code separate from the test and production environments. I am running it through VirtualBox 3.1.6 on a laptop running Ubuntu Desktop 9.10. I have it set up with a bridged network connection and it is bridged to my laptop's wireless adapter. We have no wired connections in this office. I boot up the VM and everything is fine. I can SSH into it using gnome-terminal and for a while everything is Kosher. Then seemingly randomly, the SSH terminal session with hang. No error message, nothing; it just becomes unresponsive. If I go to the VirtualBox terminal I find the VM itself is perfectly fine. It can ping and I can SSH out with it. If I restart the networking on the VM the SSH session in my gnome-terminal will most of the time become responsive again. Here's an interesting point, the SSH session will sometimes die right in the middle of me typing something (this points to it not being an idle session issue) and if I go to the VirtualBox terminal and restart the networking and then return to my gnome-terminal SSH session I find that it will come back to life and what I typed when the session hung originally will magically type itself in to the buffer. So, my input is getting stored somewhere and just can't make its way to the VM until the networking on the VM is restarted. I've tried different versions of VirtualBox and used vmdk images and vdi images and nothing seems to work. I can't tell if the problem is with my laptop, VirtualBox, or the Ubuntu Server VDI. Is there anyway to debug this issue? Or has anyone out there seen anything similar? Your help is much appreciated. Nick

    Read the article

  • Why does my DSL modem now need a reboot each time for my laptop to connect?

    - by msorens
    I have a rather peculiar home networking issue. For sometime my home network was purring along fine. I could turn on either of my laptops and they would quickly find and connect to my DSL modem (and thence the internet). Several days ago I unplugged my DSL modem for the first time in months. Upon turning it back on and waiting for the boot to finish, the lights on the panel indicated the DSL modem was fully operational, just as before. But that's not what happened. Not at all. Now when I turn on my Win7 laptop, the network icon in my system tray shows a small starburst; hovering over it the tooltip states "Not connected; connections are available". Clicking it lists several nearby networks including my own network showing a strong signal. If I click to connect, it attempts a connection but then I get a dialog stating "Windows was unable to connect to MyNet.". Turning off wireless on my laptop and turning it back on yields no difference. Running the network troubleshooter (which includes doing a repair on the network connection) yields no difference. The only remedy is to reboot the DSL modem (i.e. unplug it, wait a few seconds, then plug it back in). As soon as it goes online my laptop finds it and connects properly. To add one more twist to the story, this happened to me once before, several months ago. After a couple weeks, the situation resolved itself(!). Everything started working properly again, due to nothing I did. Final note: this problem only affects the wireless connection to the DSL modem. My desktop computer, connected via hardline to the DSL modem, connects fine when I turn it on. Any thoughts on why this is happening or how to fix it?

    Read the article

  • Vyatta internet connection + hosted site on same IP

    - by boburob
    Having a small issue setting up a vyatta. The company internet and two different websites are both on the same IP. Server 1 - Has websites hosted on ports 1000 and 3000 and also has a proxy server installed to provide internet connection to the domain Server 2 - Has a website hosted on ports 80 and 433 The vyatta is correctly natting the appropriate traffic to each server, and allowing the proxy to get internet traffic, however I have a problem getting to the websites hosted on these two servers inside the domain. I believe the problem is that the HTTP request is being sent with an IP, eg: 12.34.56.78. The request will reach the website and the server will attempt to send the request back to the IP, however this is the IP of the Vyatta, so it has nowhere else to go. I thought the solution would be something like this: rule 50 { destination { address 12.34.56.78 port 1000 } inbound-interface eth1 inside-address { address 10.19.2.3 } protocol tcp type destination } But this doesnt seem to do it! UPDATE I changed the rules to the following: rule 50 { destination { address 12.34.56.78 port 443 } outbound-interface eth1 protocol tcp source { address 10.19.2.3 } type masquerade } rule 51 { destination { address 12.34.56.78 port 443 } inbound-interface eth1 inside-address { address 10.19.2.2 } protocol tcp type destination } I am now seeing traffic going between the two with Wireshark, but the website will still fail to load.

    Read the article

  • What was your biggest waste of money, and what should you have bought instead? [closed]

    - by rob
    I waste a lot of money on computer equipment and other electronics that I don't really need. I've also bought software that I've never really used, or which as been replaced by better free software. As I'm buying things, it doesn't seem like much--fifty bucks here, a hundred dollars there. But when I go back and look at how much I've spent over my past few electronics purchases, I usually start to think of the other things I could have bought with that money instead. Most of the computer hardware and electronics don't usually improve my life by much, if at all. Case in point: back when I was in college, I prided myself on getting the best deals for computer hardware, but when I went back and added up all the money I had spent, I had probably wasted close to a thousand dollars on "cheap" $100 hard drives that eventually all went bad (including the warranty replacements). Even if they did still work, it would not be worth the effort to use them, because they're too small and too noisy by today's standards. I've also spent thousands more on other junk, such as RAM and CPU upgrades that only gave modest performance jumps, and wireless audio transmitters that I used for a short time to stream music from the now-defunct Yahoo! Music service. Every time I see a really great deal on RAM or video cards, I come one click away from buying them, but these days I'm usually able to resist. I've been wanting to get into woodworking ever since I moved into my house, and five years later I'm finally saving up for a $600 table saw. Sure, I've already got a toolbox and a couple of the essential power tools like a drill and a jigsaw, but I can't help but think that I'd have an entire shop full of woodworking tools and a lot of nice wood furniture if I hadn't wasted all that money back in college. What has been your biggest waste of money on computer stuff and technology? If you had all that money back, would you make the same mistake again and buy the same types of things, or would you spend it on something else?

    Read the article

  • Picking a degree path...

    - by Chris
    I'll be going to University of South Florida soon, and have to choose between two degrees, I want to head into general Server (IT) administration for a small / medium business. Setting up computers, imaging, managing file servers / logon servers /etc. * I had to change the http to hxxp in order to post. I have two degrees I'm currently choosing between: - BSAS hxxp://www.poly.usf.edu/Academics/AppliedAS/BSAS-IT/Program_of_Study.html - BSIT hxxp://www.poly.usf.edu/IT/ I like the idea of a BSAS because it'll get me out sooner, and then I can work on a few certifications to "match" the BSIT... I'm just worried companies will look at that as a "lesser" degree to a BSIT (or even a CS degree.) What are your guys' thoughts on these two degrees? The BSIT has more math, which I still have about 2 more classes to go through (I'll be heading to USF this August.) while the BSIT doesn't require those 2 extra math classes. I keep on hearing from people that when they hire you for your first job, they don't care which degree you have, as long as it's relevant and it's a 4-year degree, is this true?

    Read the article

  • Missing MB on a GPT partioned SSD

    - by pisswillis
    I recently installed Arch Linux on an Intel 40GB SSD. I used GPT for partioning (via GNU parted) and created the following partions: /dev/sda1 : 1 MB, no FS, flag=bios_grub /dev/sda2 : 30MB, /boot, ext2, flag=boot /dev/sda3 : 20GB, /home, ext4 /dev/sda4 : ~20GB, /, ext4 After struggling to install grub2 from the livecd environment (which I finally did via grub-install /dev/sda --root-directory=/mnt/ --no-floppy --force) I got a working system. However, when I was inspecting disk usage with df I noticed that my home partition had around 170MB of used space on it. This surprised me because the only things on /home were one users .bashrc, .bash_history, and .lesshst. du confirmed that there was only a few KB of space being used on /home. Why does df report approximately 170MB being used when du does not? Is this space "gone forever", or can I regain it by repartioning and/or reinstalling? When I installed grub2 it said something along the lines of "your embed area is too small", and that I could "use BLOCKLISTS, but BLOCKLISTS are UNRELIABLE". In the end the only way I could get a system booting from the SSD was to use blocklists via the grub-install --force flag. Is this related to the mysterious missing 170MB? Thanks

    Read the article

  • Why do hosts prefer Linux to Windows Server?

    - by iconiK
    So far I see a HUGE majority of hosts provide only Linux shared hosting, providing Windows only to VPS (or even to only dedicated servers). Why is it so? While Windows is a lot more expensive than Linux (though it depends on a lot of factors, not just initial and support license cost), it also provides ASP.NET, IIS and of course, Microsoft SQL Server. I know in the past it might have been because of cPanel being Linux only but now they have a Windows version. But still, why is Linux predominantly used on shared hosting? PHP works on both systems. IIS can be (and probably is) faster. MySQL runs on both systems as well. cPanel has a Windows version. Python, Perl, Ruby, all run on Windows as well. You even have MS SQL Server Express, which I find more superior than MySQL in both speed and features. Access is there for low usage requirements, as is SQLite (which is so great for quick small stuff). And with PowerShell you have a good alternative to the Unix shell. EDIT: I am looking for common reasons, I realize each hosting company (and/or it's clients) may have different needs. This becomes very important when you get to VPS or Cloud which give you a full operating system to use.

    Read the article

  • How to connect a USB GDI printer to Linux over a D-Link print server?

    - by jpe
    The setup is the following: +------------+ +-----------------+ +---------+ | HP LJ P1005|--USB--| D-Link DPR-1020 |---LAN---| PC Linux| +------------+ +-----------------+ + +---------+ | +------------+ +--| PC Windows | +------------+ HP LJ P1005 is one of those GDI printers that requires the printer driver to do most of the work for it and therefore is a bit "special". D-Link DPR-1020 is a print server with an Ethernet and an USB port that actually supports printing to challenged (read GDI) printers using a utility called PS-Link. What the utility does is basically mirror a USB port over the network to the print server so that the printer driver and the printer both are happy to talk to each other. The PC-s are notebooks that come and go, i.e. are not there all the time. Is there an equivalent of the D-Link PS-Link utility for Linux that could mirror a USB port over the network for a Linux host? And can the solution be used with D-Link DPR-1020? If not then I basically wasted the money buying the print server because the goal was to share a small printer among a couple of users with diverse operating systems in an office. The print server specs say that it supports Linux and LJ P1005, but the Catch 22 appears to be the solution used for GDI printers... It should be noted that it is possible to print from Linux to LJ P1005 directly over USB. This far sharing involved reconnecting the USB cable to appropriate computer to print. Now one of the desks is separated, so the cable does not work. Searching the net did not yield anything useful. Please do not suggest solutions involving a Windows machine (either virtual or not), my question is whether a solution only involving a Linux machine exists.

    Read the article

  • FTP Server with advanced features

    - by Nikolas Sakic
    Hi, We supply zone-files to our customers. Some zone files are big about 300MB and some are quite small, maybe like 1MB. We had this issue that someone setup a script to continually download the file. Imagine downloading 300MB file a few hundred times a day. Since, we don't have packet-shaper to throttle the traffic, we need to upgrade ftp server and use add-on modules to limit the download somehow. We currently use proftpd server. Also note that there are different users for different domains - say, if you want to download zone file for .INFO domain, then you use a particular user. That user can't download any other zone's file. This is what we are looking for: Have maximum of 400MB download per user per day. Or even have different download limit for different users per day. Have one connection per user at any time. Max # of connection (non-simultaneous) per user per day is 5. Anyone trying to exceed that gets banned for 24 hours. Has anyone used FTP server with similar restrictions above? Does anyone have any ideas where I can start? Any help would be appreciated. Thanks. -N

    Read the article

  • How to set up a easy-to-use proxy for the whole system with WinXP client and server?

    - by Pekka
    I am working together intensively with a colleague on the Canary Islands. We speak through live messenger and work together using a RDP software. She has frequent problems with connections to certain big-name and small-name sites (amongst others live.com, google.com, gmx.de) very likely to be caused by the spanish provider (the connections simply time out, this has been going on for weeks already). I have been thinking about setting up my computer as a proxy to make these connections work. I have a DSL connection and am behind a NAT capable router that I control. Does anybody know a simple, "one-click" way to transport ALL network traffic through a remote proxy? Without having to set proxy settings for each application that uses the internet? VPN is not an option, because I am behind a firewall that supports protocol 47 and such, but I have never succeeded in getting an incoming VPN connection to work. I can however redirect normal traffic using NAT. A VPN solution that does not need strange protocols would also be an option.

    Read the article

  • How does the Windows RENAME command interpret wildcards?

    - by dbenham
    How does the Windows RENAME (REN) command interpret wildcards? The built in HELP facility is of no help - it doesn't address wildcards at all. The Microsoft technet XP online help isn't much better. Here is all it has to say regarding wildcards: "You can use wildcards (* and ?) in either file name parameter. If you use wildcards in filename2, the characters represented by the wildcards will be identical to the corresponding characters in filename1." Not much help - there are many ways that statement can be interpretted. I've managed to successfully use wildcards in the filename2 parameter on some occasions, but it has always been trial and error. I haven't been able to anticipate what works and what doesn't. Frequently I've had to resort to writing a small batch script with a FOR loop that parses each name so that I can build each new name as needed. Not very convenient. If I knew the rules for how wildcards are processed then I figure I could use the RENAME command more effectively without having to resort to batch as often. Of course knowing the rules would also benefit batch development. (Yes - this is a case where I am posting a paired question and answer. I got tired of not knowing the rules and decided to experiment on my own. I figure many others may be interested in what I discovered)

    Read the article

  • CLI package to replace Plesk

    - by dotancohen
    Myself and another programmer are tasked with maintaining a few webservers. I prefer CLI tools, she prefers Plesk. However, I am adamant about not installing Plesk for quite a few reasons. I have written a small Python script for adding new domains, and now I am about to add the ability to configure email addresses while abstracting the details of Postfix from her. Before I go that route, I have googled to see if anything already exists, and am surprised that I have come up with nothing! Are there any mature, stable "control panels" or "server admin" tools like Plesk, but which are accessed via the CLI over SSH? I am looking for the following features: Add / remove / configure domains served by Apache. Add / remove / configure email boxes and mail groups. Add / remove MySQL databases, users, and configure users to databases. Provide basic monitoring of "server health", that is: memory usage, disk usage, CPU usage, bandwidth usage. Possibly set up STFP accounts so that only specific FTP users could access specific /var/www/someSite/ directories. Note that I was unsure if this question is OT for ServerFault. As per the ServerFault about page (There seems to be no more FAQ) this question meets two of the "ask about" criterion and zero of the "don't ask about" with the possible exception of being opinion-based. Therefore, to keep on-topic, I would like to know about the available applications but we should be subjective and less opinionated. Thank you!

    Read the article

  • How do I find my missing songs from last.fm?

    - by duality_
    My disk failed with all my music with it, lots of them. But luckily, I scrobbled every song to last.fm. I am looking for a way to scan my disk for my songs and check last.fm and tell me which songs are missing from my disk that are present on last.fm. So to recap: I would need to log into my last.fm account and compile a list of all the songs I have scrobbled and then scan my computer for missing songs. Is there a program or script that does this? I don't mind it being a shell script even. Edit: I know this is possible because I came close to this a little time ago. I created a PHP script (web page) that got all my songs through Last.fm API and then went through my files on disk and read their id3 tag. I got very close: the program showed missing songs, but there were many small issues (id3 reading was buggy, tags had different data, etc.) that required more programming time that I didn't have.

    Read the article

  • How should I perform database maintenance on a 24x7 system

    - by solublefish
    I'm a software developer who inherited a part-time DBA role. I'm responsible for an application backed by a small, high-volume 24x7 database on SQL Server 2008. While there's other stuff in the DB, the critical piece is a 50GB, 7.5M row table that serves 100K requests/sec during peak load, and about half that at "night". This is 99%+ read traffic, but the writes are constant, and required. I need to be able to perform periodic maintenance without a maintenance window. Say an index rebuild, a job to purge old data, Windows Update, or hardware upgrade. Most of the advice I've seen is along the lines of "MAKE a maintenance window." While I appreciate the sentiment, I hope there's another way. If it will solve this problem, I do have the ability to purchase new hardware or modify the database, the clients (a set of web services servers), and much of the application code (ADO.NET + ASP.NET). I've been thinking along the lines of using the warm spare (or a 3rd server) to do the maintenance, and then "swap" it into production. 1 Synchronize the spare by restoring backups, including a current transaction log. 2 Perform the maintenance tasks. 3 Reconfigure clients to connect to the spare server. Existing connections are finished within a minute or so. 4 The spare server is now the production server. The problem remaining is that the new production server is now out of date by however long it took to perform maintenance. Is there some way that the original production server can be made to queue up changes and merge them to the spare between steps 2 and 3? Any other ideas?

    Read the article

  • HP Power Manager SMTP setup doesn't have space for username & password

    - by Martha
    Is there some way to configure HP Power Manager to not assume that there's an email server running locally? We recently acquired an HP T1500 G3 UPS, which we're trying to control using HP Power Manager 4.2. The main reason we wanted to get this particular UPS is because it says it's capable of sending notifications (of the "Yo, the power's out, you may want to look into it" type) via email, as opposed to SNMP. Turns out, that's not entirely true. The server is running Windows Server 2003. It is not running an email server of any sort - we do that via two different providers. Outlook email is provided by Verizon, and our SMTP email service is provided by a small local company. When we use CDO to send auto-generated notification emails, we have to provide the SMTP server name, port, username, and password. The HP Power Manager interface only allows us to enter the server name and the username. Thus, not surprisingly, the emails never go anywhere. Help?

    Read the article

  • Undeliverable e-mail message from [email protected]

    - by QGfisher
    I am responsible for IT for a small charity and we have a problem with a few individuals who e-mail us on our hosted e-mail addresses. The individual is on btconnect and our server is also on BT broadband and using MSExchange. I understand that the message from [email protected] are generated by Exchange but can't tell whether this is a problem with our server (seems unlikely as most people send and receive e-mails perfectly well) or with the sender's server. I have copied a sample test message below and would be very grateful if somebody can explain what is causing this problem. I have * the personal details - hope that's acceptable but I don't want to compromise the individual's identity/security. ----- Original Message ----- From: "System Administrator" To: "****" <****.***@btconnect.com Sent: Tuesday, April 06, 2010 3:26 PM Subject: Undeliverable: Test Message Your message To: ***** Subject: Test Message Sent: Tue, 6 Apr 2010 15:25:59 +0100 did not reach the following recipient(s): ***@quiltersguild.org.uk on Tue, 6 Apr 2010 15:26:07 +0100 The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address.

    Read the article

< Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >