Search Results

Search found 17955 results on 719 pages for 'sub domain'.

Page 370/719 | < Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >

• Group Policy GPO not 'seen' at client

  - by fukawi2

  I have a new OU (natorg.local\NATO\Users) that I am trying to apply GP to. I have created a new user in this OU, and linked the 3 GPO's to this OU: DESKTOP - Folder Redirection (AppData) DESKTOP - Folder Redirection (Desktop) DESKTOP - Folder Redirection (Documents) Hopefully the names are sufficient to suggest what they do exactly. The settings are under User Settings so there is no Loopback processing required (if my understanding is correct). GP Modelling for the user and specific computer says that the GPOs will/should be applied, however on the client, gpresult doesn't even appear to see the GPOs under either "Applied" or "Not Applied": USER SETTINGS -------------- CN=Amir,OU=Users,OU=NATO,DC=natorg,DC=local Last time Group Policy was applied: 25/06/2012 at 11:07:13 AM Group Policy was applied from: svr-addc-01.natorg.local Group Policy slow link threshold: 500 kbps Applied Group Policy Objects ----------------------------- LAPTOPS - Power Settings WSUS - Set Server Address OUTLOOK - Auto Archive SECURITY - Lock Screen After Idle Default Domain Policy DESKTOP - Regional Settings NETWORK - Proxy Configuration NETWORK - IE General Config OFFICE - Trusted Locations OFFICE - Increase Privacy OUTLOOK - Disable Junk Filter DESKTOP - Disable Windows Error Reporting DESKTOP - Hide Language Bar NETWORK - Disable Skype DESKTOP - Disable Thumbs.db Creation WSUS - Set Server Address The following GPOs were not applied because they were filtered out ------------------------------------------------------------------- Local Group Policy Filtering: Not Applied (Empty) NETWORK - Google Chrome Configuration Filtering: Not Applied (Empty) SYSTEM - Event Log Configuration Filtering: Not Applied (Empty) SECURITY - Local Administrator Password Filtering: Not Applied (Empty) NETWORK - Disable Windows Messenger Filtering: Not Applied (Empty) SECURITY - Audit Policy Filtering: Not Applied (Empty) WSUS - Automatic Install Filtering: Not Applied (Empty) NETWORK - Firewall Configuration Filtering: Not Applied (Empty) DESKTOP - Enable Offline Files Filtering: Not Applied (Empty) I haven't altered permissions on the GPO's at all, no WMI filtering... As I said, GP Modelling says that they should be applied. GPResult on the client correctly identifies itself as being the correct OU (CN=Amir,OU=Users,OU=NATO,DC=natorg,DC=local) There are 2 x 2008R2 and a 2003 DC, domain is 2003 level, client is Windows XP SP3. Can anyone suggest why these GP Objects would be "invisible" to the client?

  Read the article

• Wireless disconnect randomly with wpa_supplicant reason=2

  - by renenglish

  I installed ubuntu-server 12.04 on my PC , and I use an usb wireless card to join the network. It works ok when I boot up my PC , but the wireless disconnects after a while. I pkill wpa_supplicant and reload the driver rtl8192cu , then it works a again. Then it disconnect again after about a random minutes. Here is the syslog: 22384 May 29 21:49:27 homecenter kernel: [ 6450.459313] wlan1: authenticated 22385 May 29 21:49:27 homecenter kernel: [ 6450.459535] wlan1: associate with f4:ec:38:45:62:74 (try 1) 22386 May 29 21:49:27 homecenter kernel: [ 6450.469080] wlan1: RX AssocResp from f4:ec:38:45:62:74 (capab=0 x431 status=0 aid=3) 22387 May 29 21:49:27 homecenter kernel: [ 6450.469085] wlan1: associated 22388 May 29 21:49:27 homecenter wpa_supplicant[2342]: Associated with f4:ec:38:45:62:74 22389 May 29 21:49:27 homecenter kernel: [ 6450.481933] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready 22390 May 29 21:49:27 homecenter wpa_supplicant[2342]: WPA: Key negotiation completed with f4:ec:38:45:62:7 4 [PTK=CCMP GTK=CCMP] 22391 May 29 21:49:27 homecenter wpa_supplicant[2342]: CTRL-EVENT-CONNECTED - Connection to f4:ec:38:45:62: 74 completed (auth) [id=0 id_str=] 22392 May 29 21:49:38 homecenter kernel: [ 6461.472014] wlan1: no IPv6 routers present 22393 May 29 21:49:38 homecenter ntpdate[2263]: step time server 91.189.94.4 offset 0.012758 sec 22394 May 29 21:49:51 homecenter ntpdate[2404]: step time server 91.189.94.4 offset -0.001190 sec 22395 May 29 21:54:38 homecenter kernel: [ 6762.052030] wlan1: deauthenticated from f4:ec:38:45:62:74 (Reas on: 2) 22396 May 29 21:54:38 homecenter wpa_supplicant[2342]: CTRL-EVENT-DISCONNECTED bssid=f4:ec:38:45:62:74 reas on=2 22397 May 29 21:54:38 homecenter kernel: [ 6762.064744] cfg80211: All devices are disconnected, going to re store regulatory settings 22398 May 29 21:54:38 homecenter kernel: [ 6762.064752] cfg80211: Restoring regulatory settings 22399 May 29 21:54:38 homecenter kernel: [ 6762.064757] cfg80211: Calling CRDA to update world regulatory d omain 22400 May 29 21:54:38 homecenter kernel: [ 6762.069938] cfg80211: Ignoring regulatory request Set by core s ince the driver uses its own custom regulatory domain 22401 May 29 21:54:38 homecenter kernel: [ 6762.069943] cfg80211: World regulatory domain updated: 22402 May 29 21:54:38 homecenter kernel: [ 6762.069945] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 22403 May 29 21:54:38 homecenter kernel: [ 6762.069949] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22404 May 29 21:54:38 homecenter kernel: [ 6762.069952] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22405 May 29 21:54:38 homecenter kernel: [ 6762.069956] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22406 May 29 21:54:38 homecenter kernel: [ 6762.069959] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22407 May 29 21:54:38 homecenter kernel: [ 6762.069962] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KH z), (300 mBi, 2000 mBm)

  Read the article

• Computer loses all installed programs and appears to return OS-only state

  - by Jake

  This is a story regarding 3 laptops of different brand and models. On separate occassions, I configured each of these Windows 7 / Vista computers with the necessary configuration and applications (which are supposedly the same actually), e.g. join office domain, same windows updates, microft office etc. These machinese were configure in our office in Singapore, and then they were taken to India for use. Someday in India, when booting up the laptop, all went fine except when it reach the log in screen, it was no longer possible to login with domain credentials. Logging into the laptop local admin account will lead to discover that the machine has returned to "OS-only state". All the configurations and applications were gone. The actual user profiles are still in the C: drive so files can still be retrieved, but under Control Panel Uninstall Programs it is evident that at least the registry is corrupted. The above scenario happen to the first 2 laptops. For the third, the system reports "Operating System Not Found" on boot up. I cannot think of any reason except to suspect a power fluctuation issue. Question is, will a power issue create this behaviour? What else can cause this issue?

  Read the article

• Cannot connect on TFS 2012 server through SSL with invalid certificate

  - by DaveWut

  I saw the problem on some forums and even here, but not as specific as mine. So here's the thing, So I've configured a TFS 2012 server, on one of my personnel server at home, and now, I'm trying to make it available through the internet, with the help of apache2 on a different UNIX based, physical server. The thing is working perfectly, I don't have any problem accessing the address https://tfs.something.com/tfs through my browser. The address can be pinged and I do have access to the TFS control panel through it. How does it work? Well, with apache2 you can set a virtual host and set up the ProxyPass and ProxyPassReserver setting, so the traffic can externally comes from a secure SSL connection, through a specified domain or sub-domain, but it can be locally redirect on a clear http session on a different port. This is my current setup. As I already said, I can access the web interface, but when I'm trying to connect with Visual Studio 2012, it can't be done. Here's the error I receive: http://i.imgur.com/TLQIn.png The technical information tells me: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. My SSL certificate is invalid and was automatically generated on my UNIX server. Even if I try to add it in the Trusted Root Certification Authorities either on my TFS server or on my local workstation, it doesn't work. I still receive the same error. Is there's a way to completely ignore certificate validation? If not, what's have I done? I mean, I've added the certificate in the trusted root certificates, it should works as mentioned on some forums... If you need more information, please ask me, I'll be pleased to provide you more. Dave

  Read the article

• iptables configuration to work with apache2 mod_proxy

  - by swdalex

  Hello! I have iptables config like this: iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A OUTPUT -p tcp --sport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -A OUTPUT -p tcp --sport 443 -j ACCEPT Also, I have apache virtual host: <VirtualHost *:80> ServerName wiki.myite.com <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8901/ ProxyPassReverse / http://localhost:8901/ <Location /> Order allow,deny Allow from all </Location> </VirtualHost> My primary domain www.mysite.com is working well with this configuration (I don't use proxy redirect on it). But my virtual host wiki.mysite.com is not responding. Please, help me to setup iptables config to allow wiki.mysite.com working too. I think, I need to setup iptables FORWARDING options, but I don't know how. update: I have 1 server with 1 IP. On server I have apache2.2 on 80 port. Also I have tomcat6 on 8901 port. In apache I setup to forwarding domain wiki.mysite.com to tomcat (mysite.com:8901). I want to secure my server by disabling all ports, except 80, 22 and 443.

  Read the article

• IIS Messing on Wordpress Permalinks or WP's fault?

  - by Jesus Rodriguez

  Hello, I had a problem and after some research I discovered the exactly point where is failing. blog.domain.com Is not working, it says that the page cannot be found (404) blog.domain.com/index.php Working as expected If you click on Home, it will says that the page cannot be found, if you try to preview a new post, it says that the page cannot be found... I can see every post btw. I run my blog on a Windows hosting using IIS. my permalink is this: /index.php/%postname% IIRC I had to use index.php because my IIS doesn't have URL rewriting. I have no problem with the index.php thing on the url, I have now a good SEO and I don't want to change my permalink but I Don't know why is not working now... just from one day to the next... It's a problem of WP or is just my host messing up? If is my blog, do you know what is causing this? (Just for create a concrete ticket about the exactly problem) Thank you.

  Read the article

• Configure Domino to use SMTP routing and hMailServer

  - by Sébastien Lachance

  I have been trying for a couple of days to set up a Domino 8.5 server. Basically, I want everything to be run inside a local network. Right now I can send email to other user in the Domino directory without any mail address. I am pretty new to all this stuff, so maybe the answer will be really obvious. What I need to do is be able to send a mail from somewhere else to a domino user that will be redirected to his account. On the Domino server, I also have hMailServer installed on port 25. I configured Domino to use port 26. I followed those step to get where I am now. -I have set the Fully qualified Internet host name to "preview.notes". -Smtp Listener task changed to Enabled to turn on the Listener so that the server can receive messages routed via SMTP routing -Setting up SMTP routing within the local Internet domain (http://www.h2l.com/help/help85%5Fadmin.nsf/f4b82fbb75e942a6852566ac0037f284/7f9738a49efc4f58852574d500097b01?OpenDocument) -I modified the person to use the [email protected] address. -I'm using the hMailServer (which have the local "preview.local" domain name) to send mail to [email protected]. When sending mail I got an error telling that the DNS is not set up correctly. Is using the Domino Smtp server instead of hMailServer will solve the problem? I can Telnet the Domino Smtp Server.

  Read the article

• SQL Server Windows-only Authentication Strategy problem

  - by Mike Thien

  I would like to use Windows-only Authentication in SQL Server for our web applications. In the past we've always created the all powerful 1 SQL Login for the web application. After doing some initial testing we've decided to create Windows Active Directory groups that mimic the security roles of the application (i.e. Administrators, Managers, Users/Operators, etc...) We've created mapped logins in SQL Server to these groups and given them access to the database for the application. In addition, we've created SQL Server database roles and assigned each group the appropriate role. This is working great. My issue revolves around that for most of the applications, everyone in the company should have read access to the reports (and hence the data). As far as I can tell, I have 2 options: 1) Create a read-only/viewer AD group and put everyone in it. 2) Use the "domain\domain users" group(s) and assign them the correct roles in SQL. What is the best and/or easiest way to allow everyone read access to specific database objects using a Windows-only Authentication method?

  Read the article

• Configuring DNS & MX records for exchange 2010

  - by Mahmoud Saleh

  i am trying to configure Exchange Server 2010 on Windows Server 2008 R2 to receive emails from the internet following the danscourses tutorials: and i followed this video for the DNS & MX records: http://www.youtube.com/watch?v=jdf_3DRssks i don't have any windows administration skills, and i am stuck with the DNS configuration. and the following are my domain configuration i got from the hosting. following are the steps i made: 1- Add new name server: add ns1.centors.com ip Exchange Server Public IP: 41.233.26.131 2- Change the A record change it to point to the public ip address Exchange Server Public IP: 41.233.26.131 3- New cname record for www and make it resolve to centors.com 4- New mx record for mail.centors.com 5- New A record for mail.centors.com: name: mail ip: Exchange Server Public IP: 41.233.26.131 6- new A record for ns1: ip: Exchange Server Public IP: 41.233.26.131 7- i made port forward in the router for SMTP and POP3 to the exchange server local ip address. ISSUE: i have a user account in the active directory, and the user is member of the domain, the user is [email protected] and when trying to login with this account in outlook 2010 on other machine using following data: account type: POP3 incoming mail server: mail.centors.com outgoing mail server: mail.centors.com i always get the error: Authorization failed, check your server settings. please advise what's wrong with the configuration, thanks in advance.

  Read the article

• Scheduled task does not run on WIndows 2003 server on VMWare unattened, runs fine otherwise

  - by lnm

  Scheduled task does not run on Windows 2003 server on VMWare. The same setup runs fine on standalone server. Test below explains the problem. We really need to run a more complex bat file, but this shows the issue. I have a bat file that copies a file from server A to server B. I use full path name, no drive mapping. Runs fine on server B from command prompt. I created a task that runs this bat file under a domain id with password that is part of administrator group on both servers. Task runs fine from Scheduled task screen, and as a scheduled task as long as somebody is logged into the server. If nobody is logged in, the task does not run. There is no error message in Task Scheduler log, just an entry that the task started, bit no entry for finish or an error code. To add insult to injury, if the task copies a file in the opposite direction, from server B to server A, it runs fine as a scheduled unattended task. If I copy a file from server B to server B, the task also runs fine unattended, I recreated exactly the same setup on a standalone server. No issues at all. I checked obvious things like the task has "run only as logged in" unchecked, domain id has run as a batch job privilege and logon rights, Task Scheduler service runs as a local system, automatic start. Any suggestions?

  Read the article

• On Windows XP, Start > Run "My Documents" sometimes doesn't work

  - by Clayton Hughes

  On all of my home computers, I can enter "my documents" into the Start Run prompt and the My Documents folder of the current profile will open up. What's more, I can continue typing subfolders, files, etc. and auto-complete works and it's smart and enjoyable. I can't check at the moment, but I'm almost positive entries like "My Pictures" and "My Music" also go to their correct folders. On my work computers, if I enter "my documents" into the Start Run prompt, I get the following error: "Windows cannot find 'my'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start Button, and then click Search." I can sort of circumvent this by creating a shortcut in my PATH named 'my' that points to My Documents folder, but this doesn't solve the auto-complete option (and it's otherwise imperfect, of course, because "my pictures" or "my music" all direct to the same place. A google search doesn't provide much help on this, although it does identify a poster in 2007 with this same question at another board: http://www.msfn.org/board/lofiversion/index.php/t124813.html (Login required, but Google cache available here: http://preview.tinyurl.com/ygxhwwl) Is this just a limitation of the networks belonging to a domain, or is there some way I can get this functionality back? My documents folder does live in the standard place (C:\Documents and Settings{username}\My Documents), and not on a network drive or anything. It's probably worth adding that the computers are part of some freakish Novell domain thing, too. I'm not in IT here so I'm not too up on the details. Thanks for any help/suggestions!

  Read the article

• Apache2, Tomcat6, and proxy redirects

  - by Randal Hale

  So here is my question - go easy and slow. I'm a GIS Consultant and general hack with linux. I inherited this volunteer job essentially because I knew more than the rest of the team - or the rest of the team isn't as stubborn as I am... With that said a number of people have been mucking around in the server before I got involved so I've been cleaning up a lot of things. The domain names have been changed to protect the innocent. I have a server running Apache2 (port 80) and tomcat6 (8080) running on ubuntu server 10.4. There is a virtual host on Apache2 called "Runner" (the domain is runner.org). I have mod_proxy loaded. I am trying to redirect everyone that visits runner.org to http://some.ip.address:8080/openrunner-webapp/ So far I've gotten runner.org assigned to the apache2 server. Someone set up a redirect in the httpd.conf file but I believe it needs to go into the virtualhost. I tried setting the redirect in the virtualhost as: *ProxyPass / http://localhost:8080/openrunner-webapp All that does is show me the root of the Apache webserver. Anyway I'm stuck

  Read the article

• Windows AD DNS: Event ID 5504

  - by Chris_K

  Two of my AD controllers (both running DNS service) appear to be having a similar issue. Both are throwing lots of events in the DNS events that look like this: Event Type: Information Event Source: DNS Event Category: None Event ID: 5504 Date: 5/24/2010 Time: 11:51:38 AM User: N/A Computer: ALPHA Description: The DNS server encountered an invalid domain name in a packet from 76.74.137.6. The packet will be rejected. The event data contains the DNS packet. That will come with the same event, same time, with a packet from 76.74.137.7 as well. I know this is "Information" not an error, but since it is new and different it bothers me (yes, I fear unexplained change!) Both machines are running Windows 2003 R2 SP2. The DNS servers are not exposed to the internet. Both DNS servers are configured to use OpenDNS for Forwarders. For both servers, this started about a week ago. Any thoughts on: 1) should I be concerned? 2) how can I stop/fix this? To keep it interesting, I have a 3rd AD / DNS box. Same domain, different Active Directory site. Same forwarders, yet doesn't have this issue.

  Read the article

• Cisco ASA: How to route PPPoE-assigned subnet?

  - by Martijn Heemels

  We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

  Read the article

• Can't ping a DNS zone on windows server 2008 R2

  - by Roberto Fernandes

  I´ve just configured a windows server 2008 r2, but got a lot of problems on DNS role. Let me talk about the server configuration: name: fdserver IP address: 192.168.0.10 I have a DNS zone called "fd.local". This is my domain and it´s working ok. I´ve created a zone called fdserver, and inside this zone a record (A) with "*" as a host. because this is a webserver, i´ve configured apache so if you enter something like "site.fdserver" it will point you to the "site" folder. This is working ok ONLY inside the server. This server is a DNS server too... and have 3 entries: 192.168.0.10 (his own IP), 8.8.8.8 and 8.8.4.4 (google public DNS). Now start the problems... Most of the computers on my network, CAN join the domain without problems. But just CAN'T ping "something.fdserver". Now comes the strange thing... If I remove the twoo secondary entries on my DNS server (8.8.8.8 and 8.8.4.4), it obvious stop accessing websites (like microsoft.com), but now the computer CAN ping "something.fdserver". I don´t know If I explained correctly... and my English is terrible... but inside the server is all working as it supposed to work. But in the workstation machines, it work only if I remove the secondary DNS!! If you need any details, just ask! thanks!

  Read the article

• Mac OS X Client With Static DHCP Assignment Requests Wrong IP via Option 50

  - by Starchy

  I have a number of Mac (and a few Linux) laptops getting DHCP from a Force10 layer 3 switch, the only DHCP server on the subnet. There's a global dynamic pool, and for each full-time employee's laptop I have a single IP static pool set by MAC address. One and only one of the clients, running OS X 10.7.5, consistently fails to get a static assignment. The MAC address in the static pool definition has been carefully re-checked. Running tcpdump on a mirrored port when the laptop connects, I see that it is specifically requesting 10.100.0.252 (a dynamic address): 11:32:10.108280 IP (tos 0x0, ttl 255, id 28293, offset 0, flags [none], proto UDP (17), length 328) 0.0.0.0.bootpc > broadcasthost.bootps: [udp sum ok] BOOTP/DHCP, Request from 3c:07:54:xx:xx:xx (oui Unknown), length 300, xid 0x1399da89, Flags [none] (0x0000) Client-Ethernet-Address 3c:07:54:xx:xx:xx (oui Unknown) Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: Request Parameter-Request Option 55, length 9: Subnet-Mask, Default-Gateway, Domain-Name-Server, Domain-Name Option 119, LDAP, Option 252, Netbios-Name-Server Netbios-Node MSZ Option 57, length 2: 1500 Client-ID Option 61, length 7: ether 3c:07:54:xx:xx:xx Requested-IP Option 50, length 4: 10.100.0.252 Lease-Time Option 51, length 4: 7776000 Hostname Option 12, length 10: "host-name" END Option 255, length 0 PAD Option 0, length 0, occurs 8 I haven't been able to find any extra system prefs or unusual software on the laptop. Disabling the interface and rebooting or temporarily setting the IP manually both fail to make any difference. Any suggestions appreciated.

  Read the article

• Recommendations for good FTP server for Win 2008 x64

  - by sfhtimssf1970

  I spent a bunch of time learning/configuring the "all new and better" FTP feature for IIS7. In my opinion, it still fails hard: In order to have multiple FTP sites on the same machine, you have to use host|user usernames (like domain.com|jason) for every account. Using IIS Manager auth doesn't seem to work at all. I'm sure I'm doing something wrong, but I can't figure out what the hell it is. I've read all the official articles on it and configured it a hundred different ways. Doesn't play well with passive connection types. That has to be disabled on the client in order for it to work. Doesn't have any way to allow one user to see multiple sites no matter what binding they are connected to. For instance, if "jason" connects to ftp.domain.com, he should be able to see domain2.com, domain3.com without seeing domain4.com and domain5.com. It takes an act of God to set this up with IIS7. So I'm wanting to install a third party FTP server instead. I've looked at FileZilla both ZFTPServer. Anyone know of any pros/cons on these? Any other recommendations?

  Read the article

• How do I make dnsmasq serve IP addresses via IPoIB?

  - by Matt

  I have a cluster farm that I'm setting up. The nodes (computers in the farm) are connected via ethernet & IP over Infiniband. I'm needing to netboot the nodes and thought dnsmasq would fit well as it provides all the features including support for DHCP over IB and it works great for our ethernet setup. However, I can't seem to get it to provide IP addresses to the infiniband adaptors on the nodes. Each node is running an Ubuntu desktop 12.04 LTS. The dnsmasq server is running on ubuntu server 12.04LTS and has the following test config: dhcp-authoritative domain-needed bogus-priv expand-hosts no-hosts domain=local dhcp-range=eth0,10.0.0.10,10.0.0.255,12h dhcp-option=eth0,3,10.0.0.1 dhcp-range=ib0,10.1.1.10,10.1.1.255,12h dhcp-option=ib0,3,10.1.1.1 log-queries log-dhcp IPoIB works between nodes when configured statically but not with dhcp. On the nodes the file /etc/network/interfaces contains auto lo iface lo inet loopback auto ib0 iface ib0 inet dhcp #iface ib0 inet static #address 10.1.1.5 #netmask 255.0.0.0 up echo connected >`find /sys -name mode | grep ib0` Is there something I need to do on the client or server end to make this work?

  Read the article

• How to write re-usable puppet definitions?

  - by Oliver Probst

  I'd like to write a puppet manifest to install and configure an application on target servers. Parts of this manifest shall be re-usable. Thus I used define for defining my re-usable functionality. Doing so, I've always the problem that there are parts of the definition which are not re-usable. A simple example is a bunch of configuration files to be created. These file must be placed in the same directory. This directory must be created only once. Example: nodes.pp node 'myNode.in.a.domain' { mymodule::addconfig {'configfile1.xml': param => 'somevalue', } mymodule::addconfig {'configfile2.xml': param => 'someothervalue', } } mymodule.pp define mymodule::addconfig ($param) { $config_dir = "/the/directory/" #ensure that directory exits: file { $config_dir: ensure => directory, } #create the configuration file: file { $name: path => "${config_dir}/${name}" content => template('a_template.erb'), require => File[$config_dir], } } This example will fail, because now the resource file {$config_dir: is defined twice. As far as I understood, it is required to extract these parts into a class. Then it looks like this: nodes.pp node 'myNode.in.a.domain' { class { 'mymodule::createConfigurationDirectory': } mymodule::addconfig {'configfile1.xml': param => 'somevalue', require => Class ['mymodule::createConfigurationDirectory'], } mymodule::addconfig {'configfile2.xml': param => 'someothervalue', require => Class ['mymodule::createConfigurationDirectory'], } } But this makes my interface hard use. Every user of my module has to know, that there is a class which is additionally required. For this simple use case the additional class might be acceptable. But with growing module complexity (lots of definitions) I'm a bit afraid of confusing the modules user. So I'd like to know is there a better way to handle this dependencies. Ideally, classes like createConfigurationDirectory are hidden from the user of the modules api. Or are there some other "Best Practices"/Patterns handling such dependencies?

  Read the article

• "The zone can be scavenged after" keeps incrementing

  - by kce

  What are you trying to do? I'm trying to enable DNS scavenging on a DNS zone that has about a hundred stale DNS records. What have you tried in order to make it happen? I setup DNS Scavenging per everyone's favorite TechNet Blog post: Don't be afraid of DNS Scavenging. Just be patient. I first disabled scavenging on all of our domain controllers: DNSCmd . /ZoneResetScavengeServers contoso.com 192.168.1.1 192.168.1.2 I then enabled automatic scavenging on the DNS zone: I then enabled DNS scavenging on one of the domain controllers: I then found a few records that I expected to get delete with timstamps from a few years ago and ensured that that the Delete this record when it becomes stale and that time stamp was actually set: Finally I reloaded the zone and waited 14 days (the sum of the Refresh + No-Refresh periods). What results did you expect? I expected to see a 2501 Event in the DNS server logs noting the deletion of a bunch of DNS records. What actually happened? Nothing happened. The Zone Aging/Scavenging Properties showed that the zone could be scavenged after 6/12/2014 10:00:00 AM last week. No 2501/2502 events were recorded. All of the records with "aged" time stamps are still present. The date at which the zone can be scavenged after incremented another seven days to ?6/?18/?2014 10:00:00 AM. As I understand it until that date stays at least 14 days in the past nothing will ever even be eligible for scavenging let alone actually be scavenged. The only 2501 events recorded in the event logs are ones that I have triggered by right clicking and selecting "Scavenge Stale Resource Records". They note that scavenging will try to run again in 168 hours which was this morning. I have DNS scavenging enabled for a few months and have waited patiently for something to happen. I have reloaded the zone multiple times (which resets this timestamp). What am I missing here?

  Read the article

• Windows 2008 Standard upgrade to Windows 2008 Enterprise failure

  - by Archit Baweja

  Sidestory, I was in the process of setting up a second Exchange 2010 server for DAG support, when I realized that my box needed Windows 2008 Enterprise edition. The box currently has Windows 2008 Standard Windows update including SP2 Exchange 2010 with CAS, HT, Mailbox roles Domain Services role File Services role. When I try to upgrade to Windows 2008 Enterprise, I initially got a "your current version of windows is more recent than the intallation media", something to that effect. My first guess was it may be SP2 related, so I uninstalled SP2, restarted and tried again. This time it gave me an error to the effect Windows could not configure one or more windows components. Please restart and try the update again. This was at the last stage of the Windows 2008 Enterprise install when it says "Completing installation". So I removed Domain Services role (including demoting it as a DC). However I get the same error again. Anyone see something like this before and have any suggestions? Also , is there a log file the windows upgrade program spits out that I can consult to see what component exactly is interfering? Update 1 Based on some googling I finally found the setup log file, and it seems that Windows setup had an issue determining the .Net 3.0 "feature" being installed or uninstalled. So based of of a win7/vista technet article I'm going to retry the upgrade after removing the .Net 3.0 feature.

  Read the article

• Hiding a Website from Search Engine Bots and Viewers by Disabling Default VirtualHost

  - by Basel Shishani

  When staging a website on a remote VPS, we would like it to be accessible to team members only, and we would also like to keep the search engine bots off until the site is finalized. Access control by host whether in Iptables or Apache is not desirable, as accessing hosts can vary. After some reading in Apache config and other SF postings, I settled on the following design that relies on restricting access to only through specific domain names: Default virtual host would be disabled in Apache config as follows - relying on Apache behavior to use first virtual host for site default: <VirtualHost *:80> # Anything matching this should be silently ignored. </VirtualHost> <VirtualHost *:80> ServerName secretsiteone.com DocumentRoot /var/www/secretsiteone.com </VirtualHost> <VirtualHost *:80> ServerName secretsitetwo.com ... </VirtualHost> Then each team member can add the domain names in their local /etc/hosts: xx.xx.xx.xx secrethostone.com My question is: is the above technique good enough to achieve the above said goals esp restricting SE bots, or is it possible that bots would work around that. Note: I understand that mod_rewrite rules con be used to achieve a similar effect as discussed here: How to disable default VirtualHost in apache2?, so the same question would apply to that technique too. Also please note: the content is not highly secretive - the idea is not to devise something that is hack proof, so we are not concerned about traffic interception or the like. The idea is to keep competitors and casual surfers from viewing the content before it's released, and to prevent SE bots from indexing it.

  Read the article

• Setting up HTTPS across multiple servers

  - by JohnyD

  I'm looking to offer our online services over https and I'm having a couple of problems understanding how to accomplish this. To access our services you must pass through our ISA firewall to a Win2000 server running IIS6. About half our services are located here and the other half take you to a Win2003 server also running IIS6. So, in order to achieve this must each server have the proper certificate installed? ISA, IIS6_1 and IIS6_2? Is there a separate configuration that must be made to our ISA firewall? The other problem is with the CA and knowing how many certificates I need. It's important to note that the domain name for our services on IIS6_1 is www.domainname.com but the domain name on IIS6_2 is services.domainname.com. I believe that this will require me to purchase more than one certificate. It looks as though we will be going with Thawte's SSL123 as it's a good name and it's fast to get. Will I need to purchase 2 certificates (one for www that will be installed on our ISA firewall as well as IIS6_1, and one for services.domainname.com on IIS6_2)? Or will I need to purchase 3, the extra one being used on our firewall server? Another side question is about SAN's (subject alternative names). Is this basically adding sub-domains to your cert? So I could purchase one cert with 1 SAN for my www and services.? Thanks a lot for your help! Please let me know if I can provide any further information.

  Read the article

• Web SMTP Server(foo.com) will not send mail to exchange server which is also(foo.com)

  - by Atom

  I think I understand this problem fully, but I do not know how to approach it or where to go in terms of troubleshooting. I've got my one domain http://foo.com that runs a Zen Cart installation that needs to be able to send emails to users(order confirmation, password reset). This works fine to send to any other domain BUT foo.com. I'm running a locally hosted exchange server that is foo.com, and we can send and receive email just fine. If I run tail -f /usr/local/psa/var/log/maillog I recieve this error: Apr 1 10:08:51 foo qmail-local-handlers[25824]: Handlers Filter before-local for qmail started ... Apr 1 10:08:51 foo qmail-local-handlers[25824]: from= Apr 1 10:08:51 foo qmail-local-handlers[25824]: [email protected] Apr 1 10:08:51 foo qmail-local-handlers[25824]: cannot reinject message to '[email protected]' Apr 1 10:08:51 foo qmail: 1270141731.583139 delivery 32410: failure: This_address_no_longer_accepts_mail./ Apr 1 10:08:51 foo qmail: 1270141731.584098 status: local 0/10 remote 0/20 I understand that the foo.com SMTP service doesn't have any account but the one that is used to authenticate mail being sent, so of course, I understand why it's saying 'this address no longer accepts mail'. My question is, how can I get the foo.com(web) SMTP service to handle emails meant for my exchange server([email protected]) or how do I handle the mail that needs to be sent to our exchange server? Is this something to do with MX records? Thanks in advance A

  Read the article

• Microsoft Web Farm Framework 502 error

  - by hermiod

  My apologies if this is a really stupid question, but I have installed and set up the new Microsoft Web Farm Framework in a UAT environment with a controller machine, a primary, and a secondary server. I have installed one of our in-house applications on to the primary server and it has been successfully provisioned across to the secondary. I have tried accessing the server via the url http:\mis-uat-002\testfarm\reviewer where mis-uat-002 is the name of the farm controller, testfarm is the name of the farm, and reviewer is the name of the application. When using this url I get a "502 - Web server received an invalid response while acting as a gateway or proxy server." error. If I access the application directly via http:\mis-uat-003\reviewer (mis-uat-003 is the primary farm server, reviewer is the application) then it works no problem. Is there some additional set up that needs to be done in order for the farm controller to do its job? It should be noted that this is a UAT environment so is not on a domain of any sort. However, if this was successful and the WFF came out with V1.0 fairly soon, we would be looking to run this on a Windows 2008 domain.

  Read the article

< Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >