Search Results

Search found 13469 results on 539 pages for 'avoid trouble'.

Page 371/539 | < Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >

• Second Monitor stays black/in power save mode

  - by Rob

  I'm using two Monitors, a Belinea o.display 1 (Recognized as a Rogen Tech Distribution Inc 20" by Ubuntu, but working fine) on the DVI-Output (connected via DVI-to-VGA-adapter) as my primary Monitor and a Dell 19" (Recognized correctly) on the HDMI-output (via HDMI-to-DVI adapter) as secondary monitor. The graphics controller is a GeForce 9500 GS. I'm running a fully updated Ubuntu 13.04 with nouveau 1:1.0.7-0ubuntu1. The problem is that the second monitor (Dell) never seems to come out of standby during boot: the screen stays black and the status led on the monitor stays orange (it's green when it's on). It is correctly recognized an the size of the desktop is set accordingly, it just stays black. Changing any setting via xrandr/arandr/etc. does nothing. The on-screen-menu of the monitor reports it to be in power save mode. When using the proprietary NVIDIA-Drivers, the second monitor works just find. But these drivers cause a lot of other problems on my system, so i would really like to avoid them. On Ubuntu 12.10 i had found a workaround: When moving the relative position of the second monitor slightly down and the up again, it would turn on and function normally: xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x88 --rotate normal sleep 2 xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x0 --rotate normal This workaround stop working after the update to 13.04, and now i'm looking for a new solution. Has anyone experienced something similarity? xrandr output: Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192 DVI-I-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 433mm x 270mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1024x768 75.1 72.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 HDMI-1 connected 1280x1024+1680+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 lshw -c video: *-display Beschreibung: VGA compatible controller Produkt: G96 [GeForce 9500 GS] Hersteller: NVIDIA Corporation Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Version: a1 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom Konfiguration: driver=nouveau latency=0 Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:df00(Größe=128) memory:fb000000-fb07ffff Thanks for your help!

  Read the article

• Why Apple’s New SDK Limitation is So Offensive

  - by TStewartDev

  I am not an Apple fanboy, nor have I ever been. However, I have owned a Mac, an iPod, and an iPhone in my lifetime, and for more than a decade, I have defended Apple against the untruths that the haters so enjoy spewing. I encouraged my wife to buy a MacBook when she needed a new laptop two years ago, and I often recommend them to my friends and relatives. I have proudly and happily used my first generation iPhone for nearly three years. Now, for the first time in well over ten years, I find myself ready to swear off Apple and encourage everyone I know to do the same. I was disappointed when Apple wouldn't allow native apps, but I still bought the iPhone. I've stomached their ambiguous app approval process even though it's apparent that Steve may just reject your app because he doesn't like you or feels threatened by you (I'm still lamenting the rejection of the Google Voice app). But, as a developer, I can no longer tolerate Apple's terms and the kind of totalitarian control they indicate Apple wants. In case you are not already familiar, Apple has dictated in their OS 4.0 SDK license agreement (the now infamous Section 3.3.1) that all apps developed for the iPhone must be coded in C, C++, or Objective C, and moreover, that using any cross-compiling platforms is a violation of the agreement. For those of you who aren't developers, let me try to illustrate why this angers those of us who are. Imagine you're a professional writer. You've had articles published in some journals and magazines, and you've got a couple popular books out there, too. You've got an idea for a new book, and so you take it to your publisher. Your publisher agrees that it's a good idea. "But," says the publisher, "we want to hold our books to a tighter standard so that our readers get the experience we want them to have. Therefore, from now on, all our writers may only use words from this list of the 10,000 most common English words. Furthermore, if you cite any other works or quote anyone, they must comply with that same list, or you'll have to rewrite the entire work as well in case our readers want to look up your citation." What do you do? If your work is a children's book, this probably isn't a big deal to you. If it's an autobiography, textbook, or even a novel, though, you're going to have a lot of trouble describing your content with only common words. It's going to take you longer to complete your book, too, since you'll be looking up less common words frequently to see if you can use them. You could always go to another publisher, but this one has the best ability to distribute your book. The next largest distributor can only do a quarter as much. You could abandon the project altogether, but then everyone loses. Isn't this a silly scenario? Who would put such a limitation on writers? Yet this is very much what Apple is doing. They are using their dominant position in the market to coerce developers to write their apps exclusively for the iPhone OS by making it too expensive to write for multiple platforms. It is at least a threefold attack, striking at Adobe who is set to release a compiler that lets Flash source be compiled to iPhone binaries; striking at Google whose Android platform stands the best chance at the moment of providing serious competition to the iPhone; and reinforcing their own strong position by keeping popular apps exclusively to iPhone. And while developers are already very upset about this, the sad fact is that most of us will cave and give in to Apple because consumers don't know any better. They will continue to buy Apple's toy forcing developers to play Apple's maniacal game in order to make any money, at least until Steve Jobs decides he doesn't like them or he intends to release a competing application (bye-bye OpenFeint). Apple has been kept in check on the desktop front by a very dominant Microsoft, but I'm afraid that their success with iPods, iTunes, and iPhones has created a monster that we may have to bear until it is slain by an anti-trust suit or dies with the retirement of Steve Jobs.

  Read the article

• Drivers for Atheros AR928X?

  - by Pato7

  I am new in Ubuntu and I had a big trouble with wifi. My ubuntu 12.10 doesn't detect my wifi card and I can't toggle the "activate wireless" option on the tasks bar (it is grey). I searched for drivers to make it work, but nothing worked for me. Can anyone give me a hand? Many thanks in advanced! lspci output 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10) 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 0c:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0c:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) lshw -c network output *-network descripción: Ethernet interface producto: 88E8057 PCI-E Gigabit Ethernet Controller fabricante: Marvell Technology Group Ltd. id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: eth0 versión: 10 serie: 00:24:be:83:b2:4f tamaño: 100Mbit/s capacidad: 1Gbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.123 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s recursos: irq:45 memoria:d3520000-d3523fff ioport:c000(size=256) memoria:d3500000-d351ffff *-network DESACTIVADO descripción: Interfaz inalámbrica producto: AR928X Wireless Network Adapter (PCI-Express) fabricante: Atheros Communications Inc. id físico: 0 información del bus: pci@0000:03:00.0 nombre lógico: wlan0 versión: 01 serie: 2c:81:58:e6:b6:03 anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.5.0-18-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:d2100000-d210ffff rfkill list all output 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no

  Read the article

• The best computer ever

  - by Jeff

  (This is a repost from my personal blog… wow… I need to write more technical stuff!) About three years and three months ago, I bought a 17" MacBook Pro, and it turned out to be the best computer I've ever owned. You might think that every computer with better specs is automatically better than the last, but that hasn't been my experience. My first one was a Sony, back in the Pentium III days, and it cost an astonishing $2,500. That was even more ridiculous in 1999 dollars. It had a dial-up modem, and a CD-ROM, built-in! It may have even played DVD's. A few years later I bought an HP, and it ended up being a pile of shit. The power connector inside came loose from the board, and on occasion would even short. In 2005, I bought a Dell, and it wasn't bad. It had a really high resolution screen (complete with dead pixels, a problem in those days), and it was the first laptop I felt I could do real work on. When 2006 rolled around, Apple started making computers with Intel CPU's, and I bought the very first one the week it came out. I used Boot Camp to run Windows. I still have it in its box somewhere, and I used it for three years. The current 17" was new in 2009. The goodness was largely rooted in having a big screen with lots of dots. This computer has been the source of hundreds of blog posts, tens of thousands of lines of code, video and photo editing, and of course, a whole lot of Web surfing. It connected to corpnet at Microsoft, WiFi in Hawaii and has presented many a deck. It has traveled with me tens of thousands of miles. Last year, I put a solid state drive in it, and it was like getting a new computer. I can boot up a Windows 7 VM in about 19 seconds. Having 8 gigs of RAM has always been fantastic. Everything about it has been fast and fun. When new, the battery (when not using VM's) could get as much as 10 hours. I can still do 7 without much trouble. After 460 charge cycles, the battery health is still between 85 and 90%. The only real negative has been the size and weight. It's only an inch thick, but naturally it's pretty big with a 17" screen. You don't get battery life like that without a huge battery, either, so it's heavy. It was never a deal breaker, but sometimes a long haul across a large airport, you know you're carrying it. Today, Apple announced a new, thinner and lighter 15" laptop, with twice the RAM and CPU cores, and four times the screen resolution. It basically handles my size and weight issues while retaining the resolution, and it still costs less than my 17" did. So I ordered one. Three years is an excellent run, but I kind of budgeted for a new workhorse this year anyway. So if you're interested in a 17" MacBook Pro with a Core 2 Duo 2.66 GHz CPU, 8 gigs of RAM and a 320 gig hard drive (sorry, I'm keeping the SSD), I have one to sell. They've apparently discontinued the 17", which is going to piss off the video community. It's in excellent condition, with a few minor scratches, but I take care of my stuff.

  Read the article

• Intermittent internet connectivity

  - by Rob Oplawar

  UPDATED: I recently built a new computer and set it up to dual-boot Windows 7 and Ubuntu 11.10. In Windows, using the same hardware, my LAN connectivity is solid. In Ubuntu, however, my network interface periodically dies and resets itself; I'll have a solid connection for 30 seconds, and then it will go out for 30 seconds. When I tail the log: tail -f /var/log/kern.log I see "eth0 link up" messages appear periodically, corresponding with the return of connectivity. I posted the original question months ago, and misinterpreted what was going on. With a working Internet connection in Windows, I ignored the problem for some months. See my answer below for the solution (drivers). ORIGINAL POST In Ubuntu, although I maintain a solid connection to my LAN (pinging the router IP address consistently returns a good result), my internet connectivity drops in and out. When I continuously ping 74.125.227.18 (a google.com server), I get responses for a while, then I start getting "Destination Host Unreachable" for a while, then I get responses again. This happens consistently, dropping the connection for about 30 seconds out of every minute or two. Whether I configure my network via the network manager or via /etc/network/interfaces seems to make no difference. I configure with the following settings: address 192.168.1.101 network 192.168.1.0 gateway 192.168.1.99 (my router's IP address) netmask 255.255.255.0 (confirmed as the right netmask for the router) broadcast 192.168.1.255 (also confirmed with the router). ifconfig confirms that these settings are working: eth0 Link encap:Ethernet HWaddr 50:e5:49:40:da:a6 inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe40:daa6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11557 errors:0 dropped:11557 overruns:0 frame:11557 TX packets:13117 errors:0 dropped:211 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9551488 (9.5 MB) TX bytes:1930952 (1.9 MB) Interrupt:41 Base address:0xa000 I get the same issue when I use automatic DHCP address settings, although I did confirm that there is no other machine on the network with the static IP address I want to use. As I said, the connection to the local network stays solid - I never have any trouble pinging 192.168.1.* - it's internet addresses that I intermittently cannot reach. It's not a DNS issue because pinging known IP addresses directly shows the same behavior. Also, I don't think it's a hardware issue, as I never have any internet connectivity problems on the same machine in Windows. The network hardware is built into the motherboard: Gigabyte Z68XP-UD3P. I managed to bring the OS fully up to date, according to the update manager, but it didn't fix the issue, and with my limited understanding of network architecture I'm at my wit's end. The only clue I can see is that ifconfig is reporting a lot of dropped packets, but I'm not sure what to do about it. UPDATE: It seems my problem is a little more generic than I described; now when I try pinging my router and google simultaneously, they both go unreachable at the same time. Running ifdown eth0 and then ifup eth0 brings it back temporarily; if I just wait it comes back after a couple of minutes. I'll broaden my search through intermittent network connectivity problems.

  Read the article

• ArchBeat Link-o-Rama for 10-24-2012

  - by Bob Rhubart

  Play Oracle Vanquisher Here's a little respite from whatever it is you normally spend your time on. Oracle Vanquisher is an online diversion that makes a game of data center optimization. According to the description: "Armed with a cool Oracle vacuum pack suit and a strategic IT roadmap, you will thwart threats and optimize your data center to increase your company’s stock price and boost your company's position." Mainly you avoid electric shock and killer birds. The current high score belongs to someone identified as "TEN." My score? Never mind. Book: DevOps for Developers | The Java Source The subject of DevOps has come up in a couple of recent OTN ArchBeat Podcasts, so it's somewhat serendipitous that Tori Weildt's recent blog post offers an overview of Java Champion Michael Hutterman's new book, DevOps for Developers, now available from Apress. Bring Your Own Device (BYOD) : Context is everything… | The ORACLE-BASE Blog BOYD is a factor in the evolution of IT, but in what context? "The real IT work in companies is still being done on PCs," says Oracle ACE Director Tim Hall. "Yes, you can use a cloud service on your phone, but look around the office and you will see those cloud services are actually being used by people on PCs." Oracle in the Cloud: Oracle EBusiness Suite sizing | Tom Laszewski Cloud expert Tom Laszewski shares several technical resources that will be helpful for sizing of Oracle EBusiness Suite. Setting Up, Configuring, and Using an Oracle WebLogic Server Cluster Author and expert Yuli Vasiliev shows you how take advantage of multiple Oracle WebLogic Server instances grouped into a cluster to maximize scalability and availability. Webcast: Reduce Costs with Oracle's Database Storage Management Watch this! Join Oracle experts Kevin Jernigan and Margaret Hamburger for an interactive webcast in which you'll learn how Oracle's Database Storage Management can reduce storage costs and management complexity while improving query performance to meet service-level agreements and compliance requirements. Event Date: Tuesday, November 6, 2012 Event Time: 10 a.m. PT/1 p.m. ET Thought for the Day "Most software today is very much like an Egyptian pyramid with millions of bricks piled on top of each other, with no structural integrity, but just done by brute force and thousands of slaves." — Alan Kay Source: softwarequotes.com

  Read the article

• How much am I worth hourly as a software/web developer? [closed]

  - by luckysmack

  I may be starting a new job very soon as a developer for both web and desktop software. The primary languages I will be using is ASP.NET with C# with some php for existing projects(I've already had one interview which went very well). The job deals primarily in advertising. But this is my first real job in the market, I have no degrees, but have some college time(~1yr). So I am primarily self taught. They are fully aware of my skill set and lack of degrees or certificates. I applied as an entry level developer. It will be a permanent and full time/hourly position, and not a per contract job. So since it my cherry job, im not really sure what to ask for. even though im self taught im pretty confident in my skills and know what im doing fairly well. I pick up on new concepts very well and find new things fairly easy to learn. Here is a very brief summary of my skills: PHP: ~2years C#/.NET: 2 months Python: Basics only. ~1 month OOP Familiarity: Great (1 year) MVC Familiarity: Great (1 year) PHP Frameworks used: CakePHP(6 months), Yii(3 months), Lithium(3 months) CMS Familiar with: Drupal(1.5 years), Wordpress(only basics) I also have ~2yrs experience in maintaining my own VPS server and the hassles all that entails (linux/debian) Pretty much all the above will be used at this job. Although I will be using C# a vast majority of the time. I only recently started learning it but am moving along fairly rapidly and its all going smooth as butter. So what have I built? I have one proprietary site built in drupal which is used an an order log for products, inventory, and their shipments. It is also able to process payments through paypal merchant services. I have worked on a handful of other small apps used here and there I'm not able to show but which worked fairly well (all in php using frameworks though). The business does fairly well and is far from a a typical corporate type environment. It is much closer to a small development studio. And it is based out of northern California. I don't know how/what more info I can give on them. I also want this to be able to be referenced by other people possibly so I am looking for general tips and ideas to get an answer as well. I had trouble finding a reasonable range on other websites which seemed to be either way to low, or showed what a veteran developer makes. I know this is a fairly subjective question, but it is difficult to get a reasonable answer or guesstimate anywhere else. Even if only a little bit help, its much appreciated. So as for the direct question, based on all this info (did I miss anything?), how much should I ask for hourly? How much am I worth as a software developer?

  Read the article

• In Technology, Ignorance is NOT Bliss

  - by Tanu Sood

  Author: Debra Lilley, ACE Director, UK Proof I’m not technical -  I’ve just finished a Latin America tour with OTN and a funny thing happened that I want to share with you; because it is quite a good analogy for how many of us use technology today and you know how I love analogies. In Costa Rica we had a really long journey up through the mountains to where our conference was to be. The road was windy and narrow and once it got dark there was no scenery to see, boredom set in. At one stage I looked at my watch to see the time, but in the dark I couldn’t make it out, so I thought I would be clever and use the torch in my smartphone! Even though as soon as I switched on the phone it showed the time, I ignored it and used the torch to read my watch. That’s us when we pay maintenance on software, ask for enhancements, and either chose not to upgrade or as I have seen so many times, upgrade but don’t use the new features. I know there are always other factors not least the upgrade costs themselves but in the later releases of all the Oracle family of applications Oracle have done a lot to make the interoperability of them with Oracle Fusion Middleware more successful and in many cases for the first time. My heritage is Oracle E Business Suite (EBS) and the availability of Oracle Weblogic for EBS is fantastic for an Oracle powered organisation that can move away from supporting multiple flavours of application server. The same release made available  - the no downtime patching that Oracle Database 11g introduced with Edition Based Redefinition. I am not saying you must use these features but you must be aware of what each release of your application brings and make a business based decision as to whether it is for you or not. I like to have a simple spreadsheet of features with no-value, nice-to-have, must-have ratings, but make the spreadsheet cumulative so that when you do upgrade you have all the features listed you previously didn’t take up. That way you can avoid the ‘using your phone to read your watch’ scenario. About the Author: Debra Lilley, Fusion Champion, UKOUG Board Member, Fusion User Experience Advocate and ACE Director. Lilley has 18 years experience with Oracle Applications, with E Business Suite since 9.4.1, moving to Business Intelligence Team Lead and Oracle Alliance Director. She has spoken at over 100 conferences worldwide and posts at debrasoraclethoughts  

  Read the article

• Java @Contented annotation to help reduce false sharing

  - by Dave

  See this posting by Aleksey Shipilev for details -- @Contended is something we've wanted for a long time. The JVM provides automatic layout and placement of fields. Usually it'll (a) sort fields by descending size to improve footprint, and (b) pack reference fields so the garbage collector can process a contiguous run of reference fields when tracing. @Contended gives the program a way to provide more explicit guidance with respect to concurrency and false sharing. Using this facility we can sequester hot frequently written shared fields away from other mostly read-only or cold fields. The simple rule is that read-sharing is cheap, and write-sharing is very expensive. We can also pack fields together that tend to be written together by the same thread at about the same time. More generally, we're trying to influence relative field placement to minimize coherency misses. Fields that are accessed closely together in time should be placed proximally in space to promote cache locality. That is, temporal locality should condition spatial locality. Fields accessed together in time should be nearby in space. That having been said, we have to be careful to avoid false sharing and excessive invalidation from coherence traffic. As such, we try to cluster or otherwise sequester fields that tend to written at approximately the same time by the same thread onto the same cache line. Note that there's a tension at play: if we try too hard to minimize single-threaded capacity misses then we can end up with excessive coherency misses running in a parallel environment. Theres no single optimal layout for both single-thread and multithreaded environments. And the ideal layout problem itself is NP-hard. Ideally, a JVM would employ hardware monitoring facilities to detect sharing behavior and change the layout on the fly. That's a bit difficult as we don't yet have the right plumbing to provide efficient and expedient information to the JVM. Hint: we need to disintermediate the OS and hypervisor. Another challenge is that raw field offsets are used in the unsafe facility, so we'd need to address that issue, possibly with an extra level of indirection. Finally, I'd like to be able to pack final fields together as well, as those are known to be read-only.

  Read the article

• Movement prediction for non-shooters

  - by ShadowChaser

  I'm working on an isometric (2D) game with moderate-scale multiplayer - 20-30 players. I've had some difficulty getting a good movement prediction implementation in place. Right now, clients are authoritative for their own position. The server performs validation and broad-scale cheat detection, and I fully realize that the system will never be fully robust against cheating. However, the performance and implementation tradeoffs work well for me right now. Given that I'm dealing with sprite graphics, the game has 8 defined directions rather than free movement. Whenever the player changes their direction or speed (walk, run, stop), a "true" 3D velocity is set on the entity and a packet it sent to the server with the new movement state. In addition, every 250ms additional packets are transmitted with the player's current position for state updates on the server as well as for client prediction. After the server validates the packet, it gets automatically distributed to all of the other "nearby" players. Client-side, all entities with non-zero velocity (ie/ moving entities) are tracked and updated by a rudimentary "physics" system - basically nothing more than changing the position by the velocity according to the elapsed time slice (40ms or so). What I'm struggling with is how to implement clean movement prediction. I have the nagging suspicion that I've made a design mistake somewhere. I've been over the Unreal, Half-life, and all other movement prediction/lag compensation articles I could find, but they all seam geared toward shooters: "Don't send each control change, send updates every 120ms, server is authoritative, client predicts, etc". Unfortunately, that style of design won't work well for me - there's no 3D environment so each individual state change is important. 1) Most of the samples I saw tightly couple movement prediction right into the entities themselves. For example, storing the previous state along with the current state. I'd like to avoid that and keep entities with their "current state" only. Is there a better way to handle this? 2) What should happen when the player stops? I can't interpolate to the correct position, since they might need to walk backwards or another strange direction if their position is too far ahead. 3) What should happen when entities collide? If the current player collides with something, the answer is simple - just stop the player from moving. But what happens if two entities take up the same space on the server? What if the local prediction causes a remote entity to collide with the player or another entity - do I stop them as well? If the prediction had the misfortune of sticking them in front of a wall that the player has gone around, the prediction will never be able to compensate and once the error gets to high the entity will snap to the new position.

  Read the article

• Understanding exceptional cases

  - by Justin

  I've been studying the use of exceptions in various php projects (such as Doctrine and Zend Framework). Exceptions seem to be thrown when unordinary input/state occurs. A perfect example is Doctrine throwing an exception when you try to use a invalid query string. I think the creators of the doctrine api understood that first, you can't query data by using an invalid DQL statement, and a developer should immediately be warned that an error has occurred, rather then letting execution continue with the possibility of an error code going un-checked. I also bet that this simplifies reading the code. I can't think of a situation where you would want to use an invalid DQL statement, except unit testing. Since this is true, it's better to avoid plaguing a bunch of code with null/error checks and use exceptions. I've read in books that exceptions shouldn't be thrown when validating dating user input. I've seen examples where of where the guideline is broken. One example is the Zend framework. If supplying an invalid controller or action name, an exception is thrown. Unlike doctrine, the user has more direct control over this sort of input. I know you can configure an error controller and set up a 404 message or what have you, but I'm curious why they have used an exception in this scenario? I guess you can argue the Zend Framework does not know how to continue processing the quest. One last example Is I wrote a function to return some html based on a given resource type. This resource type is hard-coded and sent when a user interacts with a web site (such as clicking a button to display the form to input data). I don't expect users to be mucking around with the request type. Under normal operating conditions, the resource type should be valid. To clean up some logic, I was going to throw an exception if a particular form wasn't found. This is mainly to find the correct form associated with a resource type so proper validation can occur. Does this sound like a valid use case for an exception? Right now it's pretty trivial, but I do plan to implement a restful consumer and re-using a function to map resources to their validation services would be very useful. I can then catch the exception and based on the consumer, return an error message suitable for the request type...

  Read the article

• “It Isn’t Easy At All; Otherwise, Everyone Would Be Doing It”

  - by Kathryn Perry

  A few months ago, JP Saunders (pictured left), who leads the go-to-market initiatives for the Oracle CX Service offering, kicked off a series of articles about modern customer service. He contends that to take care of customers?and the people that support those customers?companies need to make it easy to deliver consistently great experiences. But it’s not easy; it’s an art. The six posts in The Art of Easy series will help you better understand some of the customer service challenges you face and how to avoid common pitfalls. We pulled them all together here in one post for continuity and easy access. Saunders introduces the series with The Art of Easy: Make It Easy To Deliver Great Customer Service Experiences (Part 1). The Art of Easy: Offer Self Service With the Emphasis on Service (Part 2) by David Fulton (pictured left): David Fulton, Director of Product Management, Oracle Service Cloud, shares five tenets of customer self service that move an organization closer to becoming a modern customer service business. Easy Decisions For Complex Problems (Part 3) by Heike Lorenz (pictured right): Heike Lorenz, Director of Global Product Marketing, Policy Automation, writes about automating service policies to ensure that the correct decisions are being applied to the right people. The goal is to nurture the trusted relationships with customers during complex decision-making processes. Moving at the Speed of Easy (Part 4) by Chris Ulmand (pictured left): Chris Omland, Director of Product Management, Oracle Service Cloud, addresses the need for speed to keep up with customers’ expectations. His advice—start with a platform that enables agile innovation, respects a company’s unique needs, and has proven reliability to protect customer relationships. Knowledge Makes It Easy For Everyone (Part 5) by Nav Chakravarti (pictured rig: Vice President Nav Chakravarti, Oracle Service Cloud, talks about managing the knowledge that customers need and want. He coaches readers on delivering answers to customers’ questions easily, in context, with relevance, reliably, and accurately. Making Easy, Both Effective and Efficient (Part 6) by Melinda Uhland (pictured left): Melinda Uhland, Oracle CX Product Management teaches us that happy agents produce happy customers. A Modern Customer Service organization is one that invests in its agents and empowers them with tools to make them efficient and effective, which, in turn, improves customer results.

  Read the article

• Best system for creating a 2d racing track

  - by tesselode

  I am working a 2D racing game and I'm trying to figure out what is the best way to define the track. At the very least, I need to be able to create a closed circuit with any amount of turns at any angle, and I need vehicles to collide with the edges of the track. I also want the following things to be true if possible (but they are optional): The code is simple and free of funky workarounds and extras I can define all of the parts of the track (such as turns) relative to the previous parts I can predict the exact position of the road at a certain point (that way I can easily and cleanly make closed circuits) Here are my options: Use a set of points. This is my current system. I have a set of turns and width changes that the track is supposed to make over time. I have a point which I transform according to these instructions, and I place a point every 5 steps or so, depending on how precise I want the track to be. These points make up the track. The main problem with this is the discrepancy between the collisions and the way the track is drawn. I won't get into too much detail, but the picture below shows what is happening (although it is exaggerated a bit). The blue lines are what is drawn, the red lines are what the vehicle collides with. I could work around this, but I'd rather avoid funky workaround code. Beizer curves. These seem cool, but my first impression of them is that they'll be a little daunting to learn and are probably too complicated for my needs. Some other kind of curve? I have heard of some other kinds of curves; maybe those are more applicable. Use Box2D or another physics engine. Instead of defining the center of the track, I could use a physics engine to define shapes that make up the road. The downside to this, however, is that I have to put in a little more work to place the checkpoints. Something completely different. Basically, what is the simplest system for generating a race track that would allow me to create closed circuits cleanly, handle collisions, and not have a ton of weird code?

  Read the article

• Strategy for avoiding duplicate object ids for data shared across devices using iCloud

  - by rmaddy

  I have a data intensive iOS app that is not using CoreData nor does it support iCloud synching (yet). All of my objects are created with unique keys. I use a simple long long initialized with the current time. Then as I need a new key I increment the value by 1. This has all worked well for a few years with the app running isolated on a single device. Now I want to add support for automatic data sync across devices using iCloud. As my app is written, there is the possibility that two objects created on two different devices could end up with the same key. I need to avoid this possibility. I'm looking for ideas for solving this issue. I have a few requirements that the solution must meet: 1) The key needs to remain a single integral data type. Converting all existing keys to a compound key or to a string or other type would affect the entire code base and likely result in more bugs than it's worth. 2) The solution can't depend on an Internet connection. A user must be able to run the app and add data even with no Internet connection. The data should still resolve properly later when the data syncs through iCloud once a connection is available. I'll accept one exception to this rule. If no other option is available, I may be open to requiring an Internet connection the first time the app's data is initialized. One idea I have been toying around with in my head is logically splitting the integer key into two parts. The high 4 or 5 bits could be used as some sort of device id while the rest represents the actual key. The fuzzy part is figuring out how to come up with non-conflicting device ids that fit in a few bits. This should be viable since I don't need to deal will millions of devices. I just need to deal with the few devices that would be shared by a given iCloud account. I'm open to suggestions. Thanks.

  Read the article

• Collaborative work (small team) - Best practices

  - by LEM01

  I'm currently working in a very small team of programmers (2-3) and I'm looking for advices/best practices on how to organise our work. We're all working on the same application using PHP. Today we're kind of all working on our way. Today situation: List item that have to be worked on by each dev 1/week. What has to be done is defined at a high functional level (ex: Build the search engine for this product..) Commit / merge our individual branches (git) every week before the next meeting No real dev rules, no code review No test written (aouutch) Problems faced: Code quality issue: discovering someone else code is sometime tough (inline, variable+function+class names, spaces, comments..) Changes in already existing classes (impact on someone else work) Responsibility of each dev unclear: after getting someone else code and discover something messy, should I make the change? Should he make the change? How to plan those things,... What I'm looking for: Basically I'm looking into structuring the way we develop things in order to avoid frustration and improve overall quality. How to define coding standards (naming convention, code rules...)? Do you you any validation script to make sure code is valid before committing? Do you think that defining an architect role in the team is needed? Someone that would actually define what has to be developed during the next phase. By defining interfaces or class descriptions that have to be written. (Does it make sense in such a small team?) Today we're losing time into understanding what others did or tried to do, we're also losing time in discussion like "you should have done it that way! Why is this class doing that and not that..? Shouldn't we have a embedded class rather that this set of data...". I'm looking into a work process, maybe with more defined responsibilities and process in order to improve our performance. If you have experience, advices, best practices or anything to share that we could benefit from it will be much appreciated! Thanks a lot for your time!

  Read the article

• Criteria for a programming language to be considered "mature"

  - by Giorgio

  I was recently reading an answer to this question, and I was struck by the statement "The language is mature". So I was wondering what we actually mean when we say that "A programming language is mature"? Normally, a programming language is initially developed out of a need, e.g. Try out / implement a new programming paradigm or a new combination of features that cannot be found in existing languages. Try to solve a problem or overcome a limitation of an existing language. Create a language for teaching programming. Create a language that solves a particular class of problems (e.g. concurrency). Create a language and an API for a special application field, e.g. the web (in this case the language might reuse a well-known paradigm, but the whole API must be new). Create a language to push your competitor out of the market (in this case the creator might want the new language to be very similar to an existing one, in order to attract developers to the new programming language and platform). Regardless of what the original motivation and scenario in which a language has been created, eventually some languages are considered mature. In my intuition, this means that the language has achieved (at least one of) its goals, e.g. "We can now use language X as a reliable tool for writing web applications." This is however a bit vague, so I wanted to ask what you consider the most important criteria (if any) that are applied when saying that a language is mature. IMPORTANT NOTE This question is (on purpose) language-agnostic because I am only interested in general criteria. Please write only language-agnostic answers and comments! I am not asking whether any specific "language X is mature" or "which programming languages can be considered mature", or whether "language X is more mature than language Y": please avoid posting any opinions or reference about any specific languages because these are out of the scope of this question. EDIT To make the question more precise, by criteria I mean such things as "tool support", "adoption by the industry", "stability", "rich API", "large user community", "successful application record", "standardization", "clean and uniform semantics", and so on.

  Read the article

• Broken Views

  - by Ajarn Mark Caldwell

  “SELECT *” isn’t just hazardous to performance, it can actually return blatantly wrong information. There are a number of blog posts and articles out there that actively discourage the use of the SELECT * FROM …syntax.  The two most common explanations that I have seen are: Performance:  The SELECT * syntax will return every column in the table, but frequently you really only need a few of the columns, and so by using SELECT * your are retrieving large volumes of data that you don’t need, but the system has to process, marshal across tiers, and so on.  It would be much more efficient to only select the specific columns that you need. Future-proof:  If you are taking other shortcuts in your code, along with using SELECT *, you are setting yourself up for trouble down the road when enhancements are made to the system.  For example, if you use SELECT * to return results from a table into a DataTable in .NET, and then reference columns positionally (e.g. myDataRow[5]) you could end up with bad data if someone happens to add a column into position 3 and skewing all the remaining columns’ ordinal position.  Or if you use INSERT…SELECT * then you will likely run into errors when a new column is added to the source table in any position. And if you use SELECT * in the definition of a view, you will run into a variation of the future-proof problem mentioned above.  One of the guys on my team, Mike Byther, ran across this in a project we were doing, but fortunately he caught it while we were still in development.  I asked him to put together a test to prove that this was related to the use of SELECT * and not some other anomaly.  I’ll walk you through the test script so you can see for yourself what happens. We are going to create a table and two views that are based on that table, one of them uses SELECT * and the other explicitly lists the column names.  The script to create these objects is listed below. IF OBJECT_ID('testtab') IS NOT NULL DROP TABLE testtabgoIF OBJECT_ID('testtab_vw') IS NOT NULL DROP VIEW testtab_vwgo IF OBJECT_ID('testtab_vw_named') IS NOT NULL DROP VIEW testtab_vw_namedgo CREATE TABLE testtab (col1 NVARCHAR(5) null, col2 NVARCHAR(5) null)INSERT INTO testtab(col1, col2)VALUES ('A','B'), ('A','B')GOCREATE VIEW testtab_vw AS SELECT * FROM testtabGOCREATE VIEW testtab_vw_named AS SELECT col1, col2 FROM testtabgo Now, to prove that the two views currently return equivalent results, select from them. SELECT 'star', col1, col2 FROM testtab_vwSELECT 'named', col1, col2 FROM testtab_vw_named OK, so far, so good.  Now, what happens if someone makes a change to the definition of the underlying table, and that change results in a new column being inserted between the two existing columns?  (Side note, I normally prefer to append new columns to the end of the table definition, but some people like to keep their columns alphabetized, and for clarity for later people reviewing the schema, it may make sense to group certain columns together.  Whatever the reason, it sometimes happens, and you need to protect yourself and your code from the repercussions.) DROP TABLE testtabgoCREATE TABLE testtab (col1 NVARCHAR(5) null, col3 NVARCHAR(5) NULL, col2 NVARCHAR(5) null)INSERT INTO testtab(col1, col3, col2)VALUES ('A','C','B'), ('A','C','B')goSELECT 'star', col1, col2 FROM testtab_vwSELECT 'named', col1, col2 FROM testtab_vw_named I would have expected that the view using SELECT * in its definition would essentially pass-through the column name and still retrieve the correct data, but that is not what happens.  When you run our two select statements again, you see that the View that is based on SELECT * actually retrieves the data based on the ordinal position of the columns at the time that the view was created.  Sure, one work-around is to recreate the View, but you can’t really count on other developers to know the dependencies you have built-in, and they won’t necessarily recreate the view when they refactor the table. I am sure that there are reasons and justifications for why Views behave this way, but I find it particularly disturbing that you can have code asking for col2, but actually be receiving data from col3.  By the way, for the record, this entire scenario and accompanying test script apply to SQL Server 2008 R2 with Service Pack 1. So, let the developer beware…know what assumptions are in effect around your code, and keep on discouraging people from using SELECT * syntax in anything but the simplest of ad-hoc queries. And of course, let’s clean up after ourselves.  To eliminate the database objects created during this test, run the following commands. DROP TABLE testtabDROP VIEW testtab_vwDROP VIEW testtab_vw_named

  Read the article

• Why are MVC & TDD not employed more in game architecture?

  - by secoif

  I will preface this by saying I haven't looked a huge amount of game source, nor built much in the way of games. But coming from trying to employ 'enterprise' coding practices in web apps, looking at game source code seriously hurts my head: "What is this view logic doing in with business logic? this needs refactoring... so does this, refactor, refactorrr" This worries me as I'm about to start a game project, and I'm not sure whether trying to mvc/tdd the dev process is going to hinder us or help us, as I don't see many game examples that use this or much push for better architectural practices it in the community. The following is an extract from a great article on prototyping games, though to me it seemed exactly the attitude many game devs seem to use when writing production game code: Mistake #4: Building a system, not a game ...if you ever find yourself working on something that isn’t directly moving your forward, stop right there. As programmers, we have a tendency to try to generalize our code, and make it elegant and be able to handle every situation. We find that an itch terribly hard not scratch, but we need to learn how. It took me many years to realize that it’s not about the code, it’s about the game you ship in the end. Don’t write an elegant game component system, skip the editor completely and hardwire the state in code, avoid the data-driven, self-parsing, XML craziness, and just code the damned thing. ... Just get stuff on the screen as quickly as you can. And don’t ever, ever, use the argument “if we take some extra time and do this the right way, we can reuse it in the game”. EVER. is it because games are (mostly) visually oriented so it makes sense that the code will be weighted heavily in the view, thus any benefits from moving stuff out to models/controllers, is fairly minimal, so why bother? I've heard the argument that MVC introduces a performance overhead, but this seems to me to be a premature optimisation, and that there'd more important performance issues to tackle before you worry about MVC overheads (eg render pipeline, AI algorithms, datastructure traversal, etc). Same thing regarding TDD. It's not often I see games employing test cases, but perhaps this is due to the design issues above (mixed view/business) and the fact that it's difficult to test visual components, or components that rely on probablistic results (eg operate within physics simulations). Perhaps I'm just looking at the wrong source code, but why do we not see more of these 'enterprise' practices employed in game design? Are games really so different in their requirements, or is a people/culture issue (ie game devs come from a different background and thus have different coding habits)?

  Read the article

• How to handle multi-processing of libraries which already spawn sub-processes?

  - by exhuma

  I am having some trouble coming up with a good solution to limit sub-processes in a script which uses a multi-processed library and the script itself is also multi-processed. Both, the library and script are modifiable by us. I believe the question is more about design than actual code, but for what it's worth, it's written in Python. The goal of the library is to hide implementation details of various internet routers. For that reason, the library has a "Proxy" factory method which takes the IP of a router as parameter. The factory then probes the device using a set of possible proxies. Usually, there is one proxy which immediately knows that is is able to send commands to this device. All others usually take some time to return (given a timeout). One thought was already to simply query the device for an identifier, and then select the proper proxy using that, but in order to do so, you would already need to know how to query the device. Abstracting this knowledge is one of the main purposes of the library, so that becomes a little bit of a "circular-requirement"/deadlock: To connect to a device, you need to know what proxy to use, and to know what proxy to create, you need to connect to a device. So probing the device is - as we can see - the best solution so far, apart from keeping a lookup-table somewhere. The library currently kills all remaining processes once a valid proxy has been found. And yes, there is always only one good proxy per device. Currently there are about 12 proxies. So if one create a proxy instance using the factory, 12 sub-processes are spawned. So far, this has been really useful and worked very well. But recently someone else wanted to use this library to "broadcast" a command to all devices. So he took the library, and wrote his own multi-processed script. This obviously spawned 12 * n processes where n is the number of IPs to which he broadcasted. This has given us two problems: The host on which the command was executed slowed down to a near halt. Aborting the script with CTRL+C ground the system to a total halt. Not even the hardware console responded anymore! This may be due to some Python strangeness which still needs to be investigated. Maybe related to http://bugs.python.org/issue8296 The big underlying question, is how to design a library which does multi-processing, so other applications which use this library and want to be multi-processed themselves do not run into system limitations. My first thought was to require a pool to be passed to the library, and execute all tasks in that pool. In that way, the person using the library has control over the usage of system resources. But my gut tells me that there must be a better solution. Disclaimer: My experience with multiprocessing is fairly limited. I have implemented a few straightforward which did not require access control to resources. So I have not yet any practical experience with semaphores or mutexes. p.s.: In the future, we may have enough information to do this without the probing. But the database which would contain the proper information is not yet operational. Also, the design about multiprocessing a multiprocessed library intrigues me :)

  Read the article

• Practices for domain models in Javascript (with frameworks)

  - by AndyBursh

  This is a question I've to-and-fro'd with for a while, and searched for and found nothing on: what're the accepted practices surrounding duplicating domain models in Javascript for a web application, when using a framework like Backbone or Knockout? Given a web application of a non-trivial size with a set of domain models on the server side, should we duplicate these models in the web application (see the example at the bottom)? Or should we use the dynamic nature to load these models from the server? To my mind, the arguments for duplicating the models are in easing validation of fields, ensuring that fields that expected to be present are in fact present etc. My approach is to treat the client-side code like an almost separate application, doing trivial things itself and only relying on the server for data and complex operations (which require data the client-side doesn't have). I think treating the client-side code like this is akin to separation between entities from an ORM and the models used with the view in the UI layer: they may have the same fields and relate to the same domain concept, but they're distinct things. On the other hand, it seems to me that duplicating these models on the server side is a clear violation of DRY and likely to lead to differing results on the client- and server-side (where one piece gets updated but the other doesn't). To avoid this violation of DRY we can simply use Javascripts dynamism to get the field names and data from the server as and when they're neeed. So: are there any accepted guidelines around when (and when not) to repeat yourself in these situations? Or this a purely subjective thing, based on the project and developer(s)? Example Server-side model class M { int A DateTime B int C int D = (A*C) double SomeComplexCalculation = ServiceLayer.Call(); } Client-side model function M(){ this.A = ko.observable(); this.B = ko.observable(); this.C = ko.observable(); this.D = function() { return A() * C(); } this.SomeComplexCalculation = ko.observalbe(); return this; }l M.GetComplexValue = function(){ this.SomeComplexCalculation(Ajax.CallBackToServer()); }; I realise this question is quite similar to this one, but I think this is more about almost wholly untying the web application from the server, where that question is about doing this only in the case of complex calculation.

  Read the article

• Determining whether a visitor reached two different pages in one visit

  - by Shaun

  I have a funnel that I would like to track. Tracking this funnel won't work with the default "goal funnel" tracking in Google due to the fact that I am mixing events and pageviews. As such, I've created a series of reports: Visits to demo pages - An inclusion filter on "Page". Triggers an Event on these pages - An inclusion filter on "Page" and "Event Category". Does not bounce - An inclusion filter on "Page" and an exclusion filter on "Exit Page" for these same pages. Reach our storefront - ?? Purchase something - An inclusion filter on "Page" and a report that shows "Transactions". At a basic level, I need to track users who reached demo pages, then reached any page on our store. Intuitively, I created a segment, used two inclusive "Page" filters (one for the demo pages and one for any page in our store), and combined them with an "AND" operator. I thought this was working until I tried to do the same thing in a dashboard widget and on a custom report. When I tried the same thing in those areas, I got zero results. I figured this might be because widgets and custom report filters function differently from segment filters (the options are different for all of them), so I tried applying my "demo page && store page" segment to a report that gave me a general page list. All I saw was a list of the specific pages. I tried simplifying things by creating a custom report that showed all visits to store pages, then applied a segment that filtered for users who visited demo pages. This got me the same numbers as my "demo page && store page" segment, but showed a list of demo pages. This has led me to believe that the "demo page && store page segment" approach and the "demo segment && store report" functionally behave the same. However, this experience has left me questioning whether they're giving me what I want. Are these methods showing me all users who reached both sets of pages? Is there a better/easier/more standard way of doing this aside from looking at visitor flow reports? I'm trying to avoid a combination of custom variables/events and using the horizontal funnel approach since it would consume a large number of our limited goals and seems more complicated than is necessary for tracking this funnel.

  Read the article

• Advice on how to build html5 basic tile game (multi player, cross device)

  - by Eric

  I just read http://buildnewgames.com/real-time-multiplayer/ which explains the fundamentals and bets practices to build a massive real time multiplayer html5 game. My question is however given the “simplicity” of the game I need to build (simple kind of scratch game where you find or not something behind a tile), do I really need complex tools (canvas or node.js for example) ? The game The gamestakes place with a picture of our office as a background (tilemap). For HR purpose, we wish to create the following game fore employees: each day they can come to the website and click on a certain number of tiles (3 max per day) and find behind it motivation advice and interesting facts about the company. The constraints and rules the screen is divided into isometric 2D square tiles. There are basically an image (photograph of our office) number of tiles on the screen game: about 10,000 to much more (with scroll , see below) the players can scroll in 4 directions there are only 2 types of tiles: already open and closed player can open tiles that have not been yet open by other players there is no path for players : any player can click on any tile on the screen at any moment (if it’s not already done by another player) 2 players can’t be on the same tile at the same moment (or if they can, I’ll have to manage to see which one clicked on it first) only one type of player (all with similar roles), no weapon, no internal score… very simple game. no complex physics (collision only occurs if 2 players are on the same tile) The target I need to achieve: cross device, cross browsers high performance reaction (subsecond reactions) average nb of players per hour: up to 10K players per hour (quite high indeed but it’s because we aim at proving our case for the game to our business unit) So what I would like to know: 2D Tiled map: Do I need tiledmapeditor or can I enable me split the screen like here ? should I use canvas or plain html/css could be sufficient for my need? do I need a game engine/framework such as melon.js or crafty./js ? (even if the game play is extremely basic, I do need mouse and touché device support, mouse emulations on touch devices…) or ca I easily/quickly do it without? for my constraints and targets, should I use CPU acceleration ? for my constraints and targets, should I use web workers ? for the database, for a massively real time game should I avoid to put the current locations of player in MySQL as i feel it might slow me down. What kind of DB should I implement ? Thanks for your help !

  Read the article

• URL slugs: ideal length, and the real SEO effects of these slugs

  - by tattvamasi

  this question is addressed widely on SO and outside it, but for some reason, instead of taking it as a good load of great advice, all this information is confusing me. ** Problem ** I already had, on one of my sites, "prettified" urls. I had taken out the query strings, rewritten the URLS, and the link was short enough for me, but had a problem: the ID of the item or post in the URL isn't good for users. One of the users asked is there's a way to get rid of numbers, and I thought it was better for users to just see a clue of the page content in the URL. ** Solution ** With this in mind, I am trying with a section of the site.Armed with 301 redirects, some parsing work, and a lot of patience, I have added the URL slugs to some blog entries, and the slug of the URL reports the title of the article (something close to http://example.com/my-news/terribly-boring-and-long-url-that-replaces-the-number-I-liked-so-much/ ** Problems after Solution ** The problem, as I see it, is that now the URL of those blog articles is very descriptive for sure, but it is also impossible to remember. So, this brings me to the same issue I had with my previous problem: if numbers say nothing and can't be remembered, what's the use of these slugs? I prefer to see http://example.com/my-news/1/ than http://example.com/my-news/terribly-boring-and-long-url-that-replaces-the-number-I-liked-so-much/ To avoid forcing my user to memorize my URLS, I have added a script that finds the closest match to the URL you type, and redirects there. This is something I like, because the page now acts as a sort of little search engine, and users can play with the URLS to find articles. ** Open questions ** I still have some open questions, and don't seem to be able to find an answer, because answers tend to contradict one another. 1) How many characters should an URL ideally be long? I've read the magic number 115 and am sticking to that, but am not sure. 2) Is this really good for SEO? One of those blog articles I have redirected, with ID number in the URL and all, ranked second on Google. I've just found this question, and the answer seems to be consistent with what I think URL slug and SEO - structure (but see this other question with the opposite opinion) 3) To make a question with a specific example, would this URL risk to be penalized? Is it acceptable? Is it too long? StackOverflow seems to have comparably long URLs, but I'm not sure it's a winning strategy in my case. I just wanted to facilitate my users without running into Google's algorithms.

  Read the article

• Is it dangerous for me to give some of my Model classes Control-like methods?

  - by Pureferret

  In my personal project I have tried to stick to MVC, but I've also been made aware that sticking to MVC too tightly can be a bad thing as it makes writing awkward and forces the flow of the program in odd ways (i.e. some simple functions can be performed by something that normally wouldn't, and avoid MVC related overheads). So I'm beginning to feel justified in this compromise: I have some 'manager programs' that 'own' data and have some way to manipulate it, as such I think they'd count as both part of the model, and part of the control, and to me this feels more natural than keepingthem separate. For instance: One of my Managers is the PlayerCharacterManager that has these methods: void buySkill(PlayerCharacter playerCharacter, Skill skill); void changeName(); void changeRole(); void restatCharacter(); void addCharacterToGame(); void createNewCharacter(); PlayerCharacter getPlayerCharacter(); List<PlayerCharacter> getPlayersCharacter(Player player); List<PlayerCharacter> getAllCharacters(); I hope the mothod names are transparent enough that they don't all need explaining. I've called it a manager because it will help manage all of the PlayerCharacter 'model' objects the code creates, and create and keep a map of these. I may also get it to store other information in the future. I plan to have another two similar classes for this sort of control, but I will orchestrate when and how this happens, and what to do with the returned data via a pure controller class. This splitting up control between informed managers and the controller, as opposed to operating just through a controller seems like it will simplify my code and make it flow more. My question is, is this a dangerous choice, in terms of making the code harder to follow/test/fix? Is this somethign established as good or bad or neutral? I oculdn't find anything similar except the idea of Actors but that's not quite why I'm trying to do. Edit: Perhaps an example is needed; I'm using the Controller to update the view and access the data, so when I click the 'Add new character to a player button' it'll call methods in the controller that then go and tell the PlayerCharacterManager class to create a new character instance, it'll call the PlayerManager class to add that new character to the player-character map, and then it'll add this information to the database, and tell the view to update any GUIs effected. That is the sort of 'control sequence' I'm hoping to create with these manager classes.

  Read the article

• How to parse a CSV file containing serialized PHP? [migrated]

  - by garbetjie

  I've just started dabbling in Perl, to try and gain some exposure to different programming languages - so forgive me if some of the following code is horrendous. I needed a quick and dirty CSV parser that could receive a CSV file, and split it into file batches containing "X" number of CSV lines (taking into account that entries could contain embedded newlines). I came up with a working solution, and it was going along just fine. However, as one of the CSV files that I'm trying to split, I came across one that contains serialized PHP code. This seems to break the CSV parsing. As soon as I remove the serialization - the CSV file is parsed correctly. Are there any tricks I need to know when it comes to parsing serialized data in CSV files? Here is a shortened sample of the code: use strict; use warnings; my $csv = Text::CSV_XS->new({ eol => $/, always_quote => 1, binary => 1 }); my $out; my $in; open $in, "<:encoding(utf8)", "infile.csv" or die("cannot open input file $inputfile"); open $out, ">outfile.000"; binmode($out, ":utf8"); while (my $line = $csv->getline($in)) { $lines++; $csv->print($out, $line); } I'm never able to get into the while loop shown above. As soon as I remove the serialized data, I suddenly am able to get into the loop. Edit: An example of a line that is causing me trouble (taken straight from Vim - hence the ^M): "26","other","1","20,000 Subscriber Plan","Some text here.^M\ Some more text","on","","18","","0","","0","0","recurring","0","","payment","totalsend","0","tsadmin","R34bL9oq","37","0","0","","","","","","","","","","","","","","","","","","","","","","","0","0","0","a:18:{i:0;s:1:\"3\";i:1;s:1:\"2\";i:2;s:2:\"59\";i:3;s:2:\"60\";i:4;s:2:\"61\";i:5;s:2:\"62\";i:6;s:2:\"63\";i:7;s:2:\"64\";i:8;s:2:\"65\";i:9;s:2:\"66\";i:10;s:2:\"67\";i:11;s:2:\"68\";i:12;s:2:\"69\";i:13;s:2:\"70\";i:14;s:2:\"71\";i:15;s:2:\"72\";i:16;s:2:\"73\";i:17;s:2:\"74\";}","","","0","0","","0","0","0.0000","0.0000","0","","","0.00","","6","1" "27","other","1","35,000 Subscriber Plan","Some test here.^M\ Some more text","on","","18","","0","","0","0","recurring","0","","payment","totalsend","0","tsadmin","R34bL9oq","38","0","0","","","","","","","","","","","","","","","","","","","","","","","0","0","0","a:18:{i:0;s:1:\"3\";i:1;s:1:\"2\";i:2;s:2:\"59\";i:3;s:2:\"60\";i:4;s:2:\"61\";i:5;s:2:\"62\";i:6;s:2:\"63\";i:7;s:2:\"64\";i:8;s:2:\"65\";i:9;s:2:\"66\";i:10;s:2:\"67\";i:11;s:2:\"68\";i:12;s:2:\"69\";i:13;s:2:\"70\";i:14;s:2:\"71\";i:15;s:2:\"72\";i:16;s:2:\"73\";i:17;s:2:\"74\";}","","","0","0","","0","0","0.0000","0.0000","0","","","0.00","","7","1" "28","other","1","50,000 Subscriber Plan","Some text here.^M\ Some more text","on","","18","","0","","0","0","recurring","0","","payment","totalsend","0","tsadmin","R34bL9oq","39","0","0","","","","","","","","","","","","","","","","","","","","","","","0","0","0","a:18:{i:0;s:1:\"3\";i:1;s:1:\"2\";i:2;s:2:\"59\";i:3;s:2:\"60\";i:4;s:2:\"61\";i:5;s:2:\"62\";i:6;s:2:\"63\";i:7;s:2:\"64\";i:8;s:2:\"65\";i:9;s:2:\"66\";i:10;s:2:\"67\";i:11;s:2:\"68\";i:12;s:2:\"69\";i:13;s:2:\"70\";i:14;s:2:\"71\";i:15;s:2:\"72\";i:16;s:2:\"73\";i:17;s:2:\"74\";}","","","0","0","","0","0","0.0000","0.0000","0","","","0.00","","8","1""73","other","8","10,000,000","","","","0","","0","","0","0","recurring","0","","payment","","0","","","75","0","10000000","","","","","","","","","","","","","","","","","","","","","","","0","0","0","a:17:{i:0;s:1:\"3\";i:1;s:1:\"2\";i:2;s:2:\"59\";i:3;s:2:\"60\";i:4;s:2:\"61\";i:5;s:2:\"62\";i:6;s:2:\"63\";i:7;s:2:\"64\";i:8;s:2:\"65\";i:9;s:2:\"66\";i:10;s:2:\"67\";i:11;s:2:\"68\";i:12;s:2:\"69\";i:13;s:2:\"70\";i:14;s:2:\"71\";i:15;s:2:\"72\";i:16;s:2:\"74\";}","","","0","0","","0","0","0.0000","0.0000","0","","","0.00","","14","0"

  Read the article

< Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >