Search Results

Search found 12502 results on 501 pages for 'kind'.

Page 371/501 | < Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >

• Recovery disk Windows 8 HP Pavilion g6

  - by fpghost

  I recently purchased a HP Pavilion g6 laptop running Windows 8. I want to either obtain the Windows 8 ISO or make some kind of recovery disk that would allow me to restore the system if things go wrong. The HP Pavilion comes with the 'HP Recovery Manager' which I thought may do the job, but on running it and putting in a DVD-R as requested it seems to just hang for a number of hours without doing a thing (the disk sounds like it's spinning for a few minutes but then goes silent). I then tried 'recdisc.exe' but I get the error System Repair could not be created The device reported unexpected or invalid data for a command. (0xC0AA02FF) Next I obtained my Windows 8 product key using the software ProduKey thinking this would allow me to go to the Microsoft website and download the Windows 8 ISO, but as far as I can tell all that is available is the upgrade which can be used if one is running something like Windows 7. Can anyone advise? EDIT: after a reboot recdisc.exe did work; I think the problem was due to some Windows updates needing a reboot, but never the less I would like a full Windows 8 ISO if possible.

  Read the article

• Kindle (client) for Mac--text search or highlighting/notes?

  - by doug

  just so we're clear, i'm talking about the client/software version here--ie, that you install on your Mac or PC--not the device. The Kindle client was recently released for the Mac. I downloaded it and bought a couple of Kindle-edition books to view on this client. Astonishingly, two features i consider to be more or less essential to any ebook reader are missing in the Kindle client, either that, or i can't find them: (i) text searching; and (ii) highlighting text. First, does anyone know how to access the search feature? I'm aware of the "Go To" button at the top middle of the reader window--the options in that menu when you click the button are: "Cover", "Table of Contents", "Beginning" and "Location." "Location" requires that you type in an integer (but it doesn't correspond to page number--e.g., typing "167" brought me to the table of contents), not a search term. Second, there's a button on the upper right-hand corner of the window "Show Notes and Marks" yet i can't find any way to highlight text. The only kind of "note" or "mark" i have been able to record is to "bookmark" a page by clicking the "bookmark" button also at the top of the window.

  Read the article

• Unusual HEAD requests to nonsense URLs from Chrome

  - by JeremyDWill

  I have noticed unusual traffic coming from my workstation the last couple of days. I am seeing HEAD requests sent to random character URLs, usually three or four within a second, and they appear to be coming from my Chrome browser. The requests repeat only three or four times a day, but I have not identified a particular pattern. The URL characters are different for each request. Here is an example of the request as recorded by Fiddler 2: HEAD http://xqwvykjfei/ HTTP/1.1 Host: xqwvykjfei Proxy-Connection: keep-alive Content-Length: 0 User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/534.13 (KHTML, like Gecko) Chrome/9.0.597.98 Safari/534.13 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 The response to this request is as follows: HTTP/1.1 502 Fiddler - DNS Lookup Failed Content-Type: text/html Connection: close Timestamp: 08:15:45.283 Fiddler: DNS Lookup for xqwvykjfei failed. No such host is known I have been unable to find any information through Google searches related to this issue. I do not remember seeing this kind of traffic before late last week, but it may be that I just missed it before. The one modification I made to my system last week that was unusual was adding the Delicious add-in/extension to both IE and Chrome. I have since removed both of these, but am still seeing the traffic. I have run virus scan (Trend Micro) and HiJackThis looking for malicious code, but I have not found any. I would appreciate any help tracking down the source of the requests, so I can determine if they are benign, or indicative of a bigger problem. Thanks.

  Read the article

• Is it possible to trace someone using Google during an online exam?

  - by George

  I happen to be a professor at a reputed college. I want to design an online exam for over 1000 students via around 50 computers right after the vacation ends. Now the problem is that I have heard that many students use Google on a different tab to find answers when no invigilator is around. I want to know if there is a way to backtrace it after the exams via some kind of history or any other possible way. In our university there is a standard system. I am not good with computers but I will try to explain. Each computer uses mozilla to connect to a server centrally located via an IP. The students open it and enter a unique ID and password to start the exams. Many questions are jumbled and different groups of students give exam in a different time slot. Is there any way to trace it since I want to set an example for students so they won't cheat and give exams in an honest way. Additional details: Since the number of computers are less than the number of students, more than 10 students are going to use a single computer on a single day over a period of 10 hours. After this, if I check the history (and let's say someone even forgot to delete the history and I see it), will I able to figure out who among the 10 has done it? Moreover, is it even practical and feasible?

  Read the article

• HTTPS Proxy which answers CONNECT with own certificate

  - by user1109542

  I'm configuring a DMZ which has the following Scheme: Internet - Server A - Security Appliance - Server B - Intranet In this DMZ I need a Proxy server for http(s) connections from the Intranet to Internet. The Problem is, that all Traffic should be scanned by the Security Appliance. For this I have to terminate the SSL Connection at Server B, proxy it as plain http to Server A through the Security Appliance and then further as https into the Internet. An encryption is then persistent between the Client and Server B and the Target Server and Server A. The communication between Server A and Server B is unencrypted. I know about the security risks and that the client will see some warning about the unknown CA of Server B's certificate. As Software I want to use Apache Web Servers on Server A and Server B. As first step I tried to configure Server B that it serves as endpoint for the SSL Encryption. So it has to establish the encryption with the client (answering HTTP CONNECT). Listen 8443 <VirtualHost *:8443> ProxyRequests On ProxyPreserveHost On AllowCONNECT 443 # SSL ErrorLog logs/ssl_error_log TransferLog logs/ssl_access_log LogLevel debug SSLProxyEngine on SSLProxyMachineCertificateFile /etc/pki/tls/certs/localhost_private_public.crt <Proxy *> Order deny,allow Deny from all Allow from 192.168.0.0/22 </Proxy> </VirtualHost> With this Proxy only the CONNECT request is passed through and an encrypted Connection between the client and the target is established. Unfortunately there is no possibility to configure mod_proxy_connect to decrypt the SSL connection. Is there any possibility to accomplish that kind of proxying with Apache?

  Read the article

• Prevent rmdir -p from traversing above a certain directory

  - by thepurplepixel

  I hacked together this script to rsync some files over ssh. The --remove-source-files option of rsync seems to remove the files it transfers, which is what I want. However, I also want the directories those files are placed in to be gone as well. The current part of the find command, -exec rmdir -p {} ; tries to remove the parent directory (in this case, /srv/torrents), but fails because it doesn't have the right permissions. What I'd like to do is stop rmdir from traversing above the directory find is run in, or find another solution to get rid of all the empty folders. I've thought of using some kind of loop with find and running rmdir without the -p switch, but I thought it wouldn't work out. Essentially, is there an alternative way to remove all the empty directories under the parent directory? Thanks in advance! #!/bin/bash HOST='<hostname>' USER='<username>' DIR='<destination directory>' SOURCE='/srv/torrents/' rsync -e "ssh -l $USER" --remove-source-files -h -4 -r --stats -m --progress -i $SOURCE $HOST:$DIR find $SOURCE -mindepth 1 -type d -empty -prune -exec rmdir -p \{\} \;

  Read the article

• Disk fragmentation when dealing with many small files

  - by Zorlack

  On a daily basis we generate about 3.4 Million small jpeg files. We also delete about 3.4 Million 90 day old images. To date, we've dealt with this content by storing the images in a hierarchical manner. The heriarchy is something like this: /Year/Month/Day/Source/ This heirarchy allows us to effectively delete days worth of content across all sources. The files are stored on a Windows 2003 server connected to a 14 disk SATA RAID6. We've started having significant performance issues when writing-to and reading-from the disks. This may be due to the performance of the hardware, but I suspect that disk fragmentation may be a culprit at well. Some people have recommended storing the data in a database, but I've been hesitant to do this. An other thought was to use some sort of container file, like a VHD or something. Does anyone have any advice for mitigating this kind of fragmentation? Additional Info: The average file size is 8-14KB Format information from fsutil: NTFS Volume Serial Number : 0x2ae2ea00e2e9d05d Version : 3.1 Number Sectors : 0x00000001e847ffff Total Clusters : 0x000000003d08ffff Free Clusters : 0x000000001c1a4df0 Total Reserved : 0x0000000000000000 Bytes Per Sector : 512 Bytes Per Cluster : 4096 Bytes Per FileRecord Segment : 1024 Clusters Per FileRecord Segment : 0 Mft Valid Data Length : 0x000000208f020000 Mft Start Lcn : 0x00000000000c0000 Mft2 Start Lcn : 0x000000001e847fff Mft Zone Start : 0x0000000002163b20 Mft Zone End : 0x0000000007ad2000

  Read the article

• Running Solr on VPS problem

  - by Camran

  I have a VPS with Ubuntu OS. I run solr om my local machine (windows xp laptop) just fine. I have configured Jetty, and Solr just the same way as on my computer, but on the server. I have also downloaded the JRE and installed it on the server. However, whenever I try to run the start.jar file, the PuTTY terminal shows a bunch of text but gets stuck. I could pase the text here but it is very long, so unless somebody wants to see it I wont. Also, I cant view the solr admin page at all. Does anybody have experience in this kind of problem? Maybe java isn't correctly installed? It is a VPS so maybe installation is different. Thanks UPDATE: These are the last lines from the terminal, in other words, this is where it stops every time: INFO: [] webapp=null path=null params={event=firstSearcher&q=static+firstSearcher+warming+query+from+solrconfig.xml} hits=0 status=0 QTime=9 May 28, 2010 8:58:42 PM org.apache.solr.core.QuerySenderListener newSearcher INFO: QuerySenderListener done. May 28, 2010 8:58:42 PM org.apache.solr.handler.component.SpellCheckComponent$SpellCheckerListener newSearcher INFO: Loading spell index for spellchecker: default May 28, 2010 8:58:42 PM org.apache.solr.core.SolrCore registerSearcher INFO: [] Registered new searcher Searcher@63a721 main Also you should know that I installed jetty by just dragging the folders from my HD to the VPS server.

  Read the article

• How to execute a command whenever a file changes?

  - by Denilson Sá

  I want a quick and simple way to execute a command whenever a file changes. I want something very simple, something I will leave running on a terminal and close it whenever I'm finished working with that file. Currently, I'm using this: while read; do ./myfile.py ; done And then I need to go to that terminal and press Enter, whenever I save that file on my editor. What I want is something like this: while sleep_until_file_has_changed myfile.py ; do ./myfile.py ; done Or any other solution as easy as that. BTW: I'm using Vim, and I know I can add an autocommand to run something on BufWrite, but this is not the kind of solution I want now. Update: I want something simple, discardable if possible. What's more, I want something to run in a terminal because I want to see the program output (I want to see error messages). About the answers: Thanks for all your answers! All of them are very good, and each one takes a very different approach from the others. Since I need to accept only one, I'm accepting the one that I've actually used (it was simple, quick and easy-to-remember), even though I know it is not the most elegant.

  Read the article

• What is the fall off of subsecond throughput on Ethernet Network Interfaces

  - by Kyle Brandt

  On a network interface, speeds are given in term of data over time, in particular, they are bits per second. However, in the uber-fast world of computing -- a second is kind of a really long time. So for example, given a linear falloff. A 1 GBit per second interface would do 500MBit per half second, 250Mbit per quarter second etc. I imagine at certain units of time, this is no longer linear. Perhaps this is set by ethernet frequencies, system clock speeds, interrupt timers etc. I am sure this varies depending on the system -- but does anyone have more information or whitepapers on this? One of the main reasons I am curious is to understand output drops on interfaces. Even if the speed per second is much lower than the interface can handle -- perhaps there are spikes that cause drops for only small numbers of milliseconds. Perhaps various coalescing would hide this effect -- or perhaps increase it on the receiving interface? Do queues make a difference here? Example: So given if this is linear down to the MS we would have 1Mbit/MS, and if Wireshark isn't distorting what I see, should I see drops when I have a spike beyond 1Mbit?

  Read the article

• Performance-optimizing Oracle 10g on a server that is also a Tomcat JSP app server?

  - by PKHunter

  I have inherited a simple RedHat 5 - 64bit platform. It has SCSI disks on RAID1, with 16GB of RAM. Double Core CPU. Oracle 10g, Release 2. This would be a decent platform for running the DB only, perhaps, but the same server in an "A-A mode" clustering (very simple) also runs Tomcat and there are several Java servlets running on this. Sadly there is no caching platform etc. We only use an external CDN for some html caching. I am personally more familiar with web environments on the LAMPP platform (apache, php, mysql, postgresql). PROBLEM: Because the server has both Tomcat JSP/Java and Oracle 10g running on the same server, with no caching, I have some issues of the server going down. Often, sadly. QUESTION: What are my options in terms of improving performance of all these different apps? Connection Pooling? Example, in Postgresql world we have PgBouncer, which really helps things. Does Oracle have something similar? Or is there a famous Java-based external pooler that people use in production environments? (I'm not familiar with Java) Any "SQL cache" as in the MySQL and Postgresql world? Any other kind of application cache, as "APC" or "eAccelarator" in the PHP world? The "OSCache" stuff from the Java world (JSP thingie I found on Google: http://onjava.com/pub/a/onjava/2005/01/05/jspcache.html?page=2) ... What else? Sorry if this is a noob question. I have googled and googled, but problem is I don't know what to google for, other than the broad general concepts above. So if not full answers, I would even appreciate basic pointers and I am happy to JFGI myself. Thanks!

  Read the article

• Mysql: create index on 1.4 billion records

  - by SiLent SoNG

  I have a table with 1.4 billion records. The table structure is as follows: CREATE TABLE text_page ( text VARCHAR(255), page_id INT UNSIGNED ) ENGINE=MYISAM DEFAULT CHARSET=ascii The requirement is to create an index over the column text. The table size is about 34G. I have tried to create the index by the following statement: ALTER TABLE text_page ADD KEY ix_text (text) After 10 hours' waiting I finally give up this approach. Is there any workable solution on this problem? UPDATE: the table is unlikely to be updated or inserted or deleted. The reason why to create index on the column text is because this kind of sql query would be frequently executed: SELECT page_id FROM text_page WHERE text = ? UPDATE: I have solved the problem by partitioning the table. The table is partitioned into 40 pieces on column text. Then creating index on the table takes about 1 hours to complete. It seems that MySQL index creation becomes very slow when the table size becomes very big. And partitioning reduces the table into smaller trunks.

  Read the article

• extra managed+unmanaged switches @ home/office -- best (mis)usage scenario? what would you do?

  - by locuse

  up front -- definitely NOT a mission-critical kind of question. after a 'spring cleaning' of my local office, i've ended up with two 'spare' GigE switches at my home/office -- one managed, capable of VLANs, QoS, etc, and the other unmanaged. i've got more ports than i need. in fact EACH switch has more total ports than i need. but, since i can't have these just sitting around not doing SOMETHING ... ;-) i'm interested in ideas for best combined use of these switches. my local topology is simple: [ net ] -- [ adsl2 modem ] -- [linux firewall/router/DNS ] _______________| | [ some arrangement of the 2 GigE switches ] | ( ... stuff on the lan ... ) [WAP1] [voip ATA] [printer] [desktop1] [mail server] [Xen server [desktop2] ( mostly dev, [desktop3] + file server [desktop4] + media server)] the MailServer is a production mail server the XenServer serves some low vol to the 'net; the MediaServer guest serves ONLY to the LAN is there, e.g., any performance value in segmenting off any of the LAN using the managed switch (VLAN? QoS tagging? something?), feeding the rest into the connected unmanaged switch? or should i simply use one of the switches & be done with it, and use the other for a coffee-cup stand?

  Read the article

• How to troubleshoot this memory usage?

  - by Camran

  I have a classifieds website. I use PHP, MySql, and SOLR. Solr uses a Servlet Container, in my case JETTY, which is java application. I just noticed that something was terribly wrong on my website. I opened the terminal and entered the "top" command and noticed that JAVA was EATING all the cpu and mem. Now I thought "Ok, maybe I need more mem and cpu" So I increased it. But along with the increase the java app started eating more. This has never happened before, and it is either a bug, or a hack of some kind. Anyways, I need to troubleshoot this now, and so I wonder how do I do this? Can I somehow pinpoint exactly when the memory usage started to go up from some error log? How does one troubleshoot this? How do I prevent it? Is it possible to prevent too many requests somehow, if they are within a timeline? Thanks

  Read the article

• Is it logical that file system acls would be corrupted in a way that adds permission for another user?

  - by wilbbe01

  I was having issues on a shared hosting provider with the host's web server instance not serving some files. I asked the companies support about the issue and they responded with the results of getfacl on my home directory, and added the necessary line to allow their web server to obtain the necessary permissions. All is working happily now, but I noticed a line in the getfacl that was for what appeared to be another username to which I had no relation. I asked them about this and their response was that it was likely some minor corruption and that I could remove the unwanted line with the setfacl -x option. I know I never added the user to my home directory, and I also find it weird that that could truly happen due to corruption. So now that it is fixed I'm a little bit weary of whether or not they were trying to cover up a problem they accidentally gave someone permissions to my account, or if this kind of thing can really be corrupted in that way. Especially when that user is a real user on the same server. Any thoughts? Thanks.

  Read the article

• Network bandwidth usage dashboard?

  - by SkippyFlipjack

  I have a couple of wifi access points hooked up to my home network, one of which I keep unsecured for some development I do; there are only a couple other homes within range and they've got their own wifi so it's not a big concern. I also have a Sonos system, Tivo, Roku, a couple laptops, a couple phones, an iPad and a desktop machine, all of which are internet-smart. So when my internet bandwidth tanks and it takes five minutes to load a YouTube video, I want to know what's going on, and there are many potential culprits. I'd like to be able to plug my MacBook into the primary router and see a nice little dashboard of the units on the network and what kind of bandwidth each is using at that moment. I could figure this out from WireShark or tcpdump but figure there has to be an easier way. I've tried a few different commercial products but none really presented the right info. Suggestions? (This may be a question for superuser since my Apple Time Capsule's SNMP capabilities are limited, but I figure admins of small business networks would have dealt w/ the same issue..)

  Read the article

• Linux servers in a (primarily) Windows (AD) environment

  - by HannesFostie

  When I arrived at my current position, our environment existed almost exclusively of Windows servers. However, I am a big fan of using Linux for certain applications, like the webgallery I was asked to set up, a simple SFTP server, Nagios for monitoring etc. I do fine setting these up, but not being the Linux expert, I am not sure how to properly join these servers to the domain and was therefor wondering what procedures or guidelines other people follow. We often use ping -a to quickly figure out the hostname of a certain server, but this does not seem to work for the linux machines, most likely because of the whole WINS/NetBios thing I assume. I just joined one server to the domain, but probably missed something cause it's not working even after a dnsflush. Next to that, the couple procedures I've found so far are pretty extensive and most of the time don't seem worth the time. Best case scenario, I download some kind of client (smbclient?), enter the domain name and maybe the server to use, supply an administrator password and that's it. Is that possible at all? Thanks

  Read the article

• Throughput and why do ISPs sell too much bandwidth?

  - by jonescb

  I hope the question made sense how I worded it. :) I've been wondering, maximum theoretical bandwidth is measured as RWIN/RTT (Window size / round trip time) Source 1 and Souce 2 So if a major city only 100 miles away gives me a ping of 50ms, and I have the default 64kb TCP window size then my maximum throughput will be 12.5Mb/s. Everything further away would give me a higher ping and therefore a lower throughput. Is there any reason to buy something like FiOS with a 50Mb/s or greater connection? Will you ever be able to reach that kind of speed? I know you can increase the TCP window size to increase throughput, but it has to be at both ends which is a deal breaker because you can't control the server. I'm assuming other network protocols like UDP aren't quite as affected by latency as TCP is, but how much of overall network traffic does non-TCP make up vs TCP. Am I just misguided about how throughput works? But if the above is correct, then why should a consumer like me buy way more bandwidth than can be realistically used. Maybe the only reason is for downloading multiple things at once, or one thing from multiple servers/peers?

  Read the article

• Fix elements within objects at their position? (Prevent movement when resizing)

  - by Skadier

  I would like to know if it is possible to fix elements at their absolute position within custom elements in InDesign CS5? I created a kind of speech bubble and I would like to place a stripline within this bubble to separate two content areas. Just a little scheme to show the desired layout as Pseudo-Markup :D <speech-bubble> <textbox>HEADER SECTION</textbox> <stripline> <textbox>Some other text</textbox> </speech-bubble> I created something like this but with two separate elements which aren't connected. So I have to select both of them in order to move the whole bubble. Then I tried to connect them using Object->Paths->Create linked path but then the stripline moves and the HEADER SECTION moves too. All in all I would like to have a speech bubble which can be resized in order to hold more text but it shouldn't make the HEADER_SECTION larger or move the stripline. Hope you understand what I mean :D Thanks in advance!

  Read the article

• Logging communication between two VMs

  - by sYnfo

  Hi, I'm trying to set up "malware lab" described in this paper. So far, I've set up Windows guest system, adding one Host-only Network adapter, and setting this (sorry if the names aren't exactely correct, I don't have an english language version): - IP Address - 10.0.0.3 - Subnet mask - 255.255.255.0 - Default gateway - not set - Preferred DNS - 10.0.0.4 - Alternate DNS - not set And a Linux guest system - Ubuntu 9.04 - with two Network adapters - Bridged (eth0) and Host-only (eth1), and setting eth1 IP Address to 10.0.0.4, leaving the eth0 to be set by DHCP. Then, I have configured iptables as described in the paper, ie.: iptables -F -t nat iptables -F -t mangle iptables -t mangle -P PREROUTING ACCEPT iptables -t mangle -P OUTPUT ACCEPT iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -P OUTPUT ACCEPT iptables -t mangle -A PREROUTING -i eth0 -j ACCEPT iptables -t mangle -A PREROUTING -p udp -i eth1 -d 10.0.0.3 --dport 53 -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -i eth1 --dport 80 -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -i eth1 -d 10.0.0.3 --dport 6000:7000 -j ACCEPT iptables -t mangle -A PREROUTING -i eth1 -j ULOG iptables -t mangle -A PREROUTING -i eth1 -j DROP Now, when I try to ping the windows system from within the Linux system, it does not reply, I guess thats perfectly normal, because iptables is blocking ping responce. Same when I try to ping the Linux system from within the Windows. But when I try to access any web page from within the Windows system, I would expect that this action should get logged by iptables. But thing is, I don't see any of that kind of lines in log file (If I am looking in the right place, that is. :) It is at /var/log/messages, isn't it?). So, what do you think might be the problem here? I should note, that this is the first time I'm using linux, so don't expect ANY working knowledge of Linux at all... :) Also, since english is not my mother tongue, feel free to point out any gramatical mistakes... :) Thanks for any advice.

  Read the article

• LMDE detects a wireless card, but can't use it

  - by Davidos

  LMDE can see my wireless card, and correctly identifies it, but it refuses to let me turn it on through the shiny graphical interface. Is there a way to use the non-shiny terminal to turn on my wireless? One small tidbit I noticed was the stated version; it says the version is 00. I believe that's hexadecimal for 0, which may indicate something screwy with the software. It would be nice if someone could tell me how to figure out how to solve this kind of problem in the future. *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 00 serial: 91:e3:7b:0d:a3:a9 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-1-amd64 firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:e1d00000-e1d01fff I've tested multiple other network managers, and none of them work. W ireless switch is on, I'm sure it's a driver problem.

  Read the article

• Is there a simple context-menu add-in that could make-up for the Windows-7 status bar deficiency?

  - by DanO

  Edit: I initially asked about free disk space and selected item size. It has since been pointed out that the selected item size summary is still availiable natively in the details pane. I had read elsewhere (wikipedia) that this was removed along with disk free space, which is not the case. Only free disk space has been completely removed. Selection size is still availiable. Is there a context menu add-in out there that could show the free disk space of the relevant drive, when you right click? This would go a long way to compensating for one of the only steps backward I’ve discovered in Windows 7 so far. I doubt anyone had created one specifially for this need before windows 7 because this information was previously easily accessible in the status bar. I thought about creating one, but it has been a while since I have messed with the Shell API, and I know there are coders out there who could do it faster and better. If you’ve heard of one, or know of something else to make-up for this Microsoft misstep, I’d appreciate hearing about it. If MS were listing to the community they would already have a powertoy or add-in of some kind to un-break this. (they could release it unsupported even), as there seem to be many power users that are extremely annoyed by this feature removal decision. If anyone has seen something, please post it here. As it has been only 4 days since official Windows 7 release, I'll wait at least a week to chose an answer. Here's a picture of protoype screenshot: SU question 19232 is related.

  Read the article

• Ubuntu server 10.04 disconnects after short periods of inactivity on my site

  - by user57019

  I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

  Read the article

• How does voltage fluctuation affect a laptop

  - by user45535

  I own an Acer Aspire 3680. In the past 2 years, I have given, my laptop for service due to the same kind of problem. Last year at the same time, I gave my laptop to the service center. They repaired it and I managed to ask them this question: Why does this problem happen. How can I prevent it? They said, that due to voltage fluctuations, something has gone wrong in your laptop. They actually were hesistant in mentioning as to which part they changed/repaired. Now recently the same problem happened and again I gave it to a service center to get it repaired and they also said, this is caused due to voltage fluctuation. My Question is: Due to Voltage fluctuation which part of the laptop can get affected. How can I prevent this from happening. Laptop Symptoms before I gave to service: When I plug in the adapter for charging the Green Light blinks and the laptop doesn't turn on. Neither does the charging indicator indicates the light, while charging.

  Read the article

• Apache Virtual Host with directory aliases

  - by brechtvhb

  Hi, I'm trying to set up a dynamic virtual host in apache with a directory alias pointing to a difirent path for every domain. Here's what I'm trying to achive. Say I have 2 domains: * www.domain1.com * www.domein2.com I want both to point to the same index.php file (C:/cms/index.php). Now the hard part ... I want directories or certain file types to point to a diffirent path for each domain. Example: * www.domain1.com/layout -> C:/store/www.domain1.com/layout * www.domain2.com/layout -> C:/store/www.domain2.com/layout * www.domain1.com/image.png -> C:/store/www.domain1.com/image.png * www.domain2.com/image.png -> C:/store/www.domain2.com/image.png However the admin directory should point to the same path again for all sites * www.domain1.com/admin -> C:/cms/admin * www.domain2.com/admin -> C:/cms/admin Is there a way to achieve this kind of behaviour in apache 2.2 without having to create a virtualhost entry for each new domain?

  Read the article

< Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >