Search Results

Search found 10245 results on 410 pages for 'quick guide to irm'.

Page 371/410 | < Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >

• Windows 8/Surface Lunch Event Summary

  - by Tim Murphy

  Today was a big day for Microsoft with two separate launch event.  The first for Windows 8 and all of it’s hardware partners.  The second was specifically to introduce the Microsoft Windows 8 Surface tablet.  Below are some of the take-aways I got from the webcasts. Windows 8 Launch The three general area that Microsoft focused on were the release of the OS itself, the public unveiling of the Windows Store and the new devices available from its hardware partners. The release of the OS focused on the fact that it will be available at mid-night tonight for both new PCs and for upgrades.  I can’t say that this interested me that much since it was already known to most people.  I think what they did show well was how easy the OS really is to use. The Windows Store is also not a new feature to those of us who have been running the pre-release versions of Windows 8 or have owned Windows Phone 7 for the past 2 years.  What was interesting is that the Windows Store launches with more apps available than any other platforms store at their respective launch.  I think this says a lot about how Microsoft focuses on the ability of developers to create software and make it available.  The of course were sure to emphasize that the Windows Store has better monetary terms for developers than its competitors. The also showed off the fact that XBox Music streaming is available for to all Windows 8 user for free.  Couple this with the Bing suite of apps that give you news, weather, sports and finance right out of the box and I think most people will find the environment a joy to use. I think the hardware demo, while quick and furious, really show where Windows shine: CHOICE!  They made a statement that over 1000 devices have been certified for Windows 8.  They showed tablets, laptops, desktops, all-in-ones and convertibles.  Since these devices have industry standard connectors they give a much wider variety of accessories and devices that you can use with them. Steve Balmer then came on stage and tried to see how many times he could use the “magical”.  He focused on how the Windows 8 OS is designed to integrate with SkyDrive, Skype and Outlook.com.  He also enforced that they think Windows 8 is the best choice for the Enterprise when it comes to protecting data and integrating across devices including Windows Phone 8. With that we were left to wait for the second event of the day. Surface Launch The second event of the day started with kids with magnets.  Ok, they were adults, but who doesn’t like playing with magnets.  Steven Sinofsky detached and reattached the Surface keyboard repeatedly, clearly enjoying himself.  It turns out that there are 4 magnets in the cover, 2 for alignment and 2 as connectors. They then went to giving us the details on the display.  The 10.6” display is optically bonded to the case and is optimized to reduce glare.  I think this came through very well in the demonstrations. The properties of the case were also a great selling point.  The VaporMg allowed them to drop the device on stage, on purpose, and continue working.  Of course they had to bring out the skate boards made from Surface devices. “It just has to feel right” was the reason they gave for many of their design decisions from the weight and size of the device to the way the kickstand and camera work together.  While this gave you the feeling that the whole process was trial and error you could tell that a lot of science went into the specs.  This included making sure that the magnets were strong enough to hold the cover on and still have a 3 year old remove the cover without effort. I am glad that they also decided the a USB port would be part of the spec since it give so many options.  They made the point that this allows Surface to leverage over 420 million existing devices.  That works for me. The last feature that I really thought was important was the microSD port.  Begin stuck with the onboard memory has been an aggravation of mine with many of the devices in the market today. I think they did job of really getting the audience to understand why you want this platform and this particular device.  Using personal examples like creating a video of a birthday party and being in it or the fact that the device was being used to live blog the event and control the lights and presentation.  They showed very well that it was not only fun but very capable of getting real work done.  Handing out tablets to the crowd didn’t hurt either.  In the end I really wanted a Surface even though I really have no need for one on a daily basis.  Great job Microsoft! del.icio.us Tags: Windows 8,Win8,Windows 8 Luanch

  Read the article

• Windows 8 for productivity?

  - by Charles Young

  At long last I’ve started using Windows 8.  I boot from a VHD on which I have installed Office, Visio, Visual Studio, SQL Server, etc.  For a week, now, I’ve been happily writing code and documents and using Visio and PowerPoint.  I am, very much, a ‘productivity’ user rather than a content consumer.   I spend my days flitting between countless windows and browser tabs displayed across dual monitors.  I need to access a lot of different functionality and information in as fluid a fashion as possible. With that in mind, and like so many others, I was worried about Windows 8.  The Metro interface is primarily about content consumption on touch-enabled screens, and not really geared for people like me sitting in front of an 8-core non-touch laptop and an additional Samsung monitor.  I still use a mouse, not my finger.  And I create more than I consume. Clearly, Windows 8 won’t be viable for people like me unless Metro keeps out of my hair when using productivity and development tools.  With this in mind, I had long expected Microsoft to provide some mechanism for switching Metro off.  There was a registry hack in last year’s Developer Preview, but this capability has been removed.   That’s brave.  So, how have things worked out so far? Well, I am really quite surprised.  When I played with the Developer Preview last year, it was clear that Metro was unfinished and didn’t play well enough with the desktop.  Obviously I expected things to improve, but the context switching from desktop to full-screen seemed a heavy burden to place on users.  That sense of abrupt change hasn’t entirely gone away (how could it), but after a few days, I can’t say that I find it burdensome or irritating.   I’ve got used very quickly to ‘gesturing’ with my mouse at the bottom or top right corners of the screen to move between applications, using the Windows key to toggle the Start screen and generally finding my way around.   I am surprised at how effective the Start screen is, given the rather basic grouping features it provides.  Of course, I had to take control of it and sort things the way I want.  If anything, though, the Start screen provides a better navigation and application launcher tool than the old Start menu. What I didn’t expect was the way that Metro enhances the productivity story.  As I write this, I’ve got my desktop open with a maximised Word window.  However, the desktop extends only across about 85% of the width of my screen.  On the left hand side, I have a column that displays the new Metro email client.  This is currently showing me a list of emails for my main work account.  I can flip easily between different accounts and read my email within that same column.  As I work on documents, I want to be able to monitor my inbox with a quick glance. The desktop, of course, has its own snap feature.  I could run the desktop full screen and bring up Outlook and Word side by side.  However, this doesn’t begin to approach the convenience of snapping the Metro email client.  Consider that when I snap a window on the desktop, it initially takes up 50% of the screen.  Outlook doesn’t really know anything about snap, and doesn’t adjust to make effective use of the limited screen estate.  Even at 50% screen width, it is difficult to use, so forget about trying to use it in a Metro fashion. In any case, I am left with the prospect of having to manually adjust everything to view my email effectively alongside Word.  Worse, there is nothing stopping another window from overlapping and obscuring my email.  It becomes a struggle to keep sight of email as it arrives.  Of course, there is always ‘toast’ to notify me when things arrive, but if Outlook is obscured, this just feels intrusive. The beauty of the Metro snap feature is that my email reader now exists outside of my desktop.   The Metro app has been crafted to work well in the fixed width column as well as in full-screen.  It cannot be obscured by overlapping windows.  I still get notifications if I wish.  More importantly, it is clear that careful attention has been given to how things work when moving between applications when ‘snapped’.  If I decide, say to flick over to the Metro newsreader to catch up with current affairs, my desktop, rather than my email client, obligingly makes way for the reader.  With a simple gesture and click, or alternatively by pressing Windows-Tab, my desktop reappears. Another pleasant surprise is the way Windows 8 handles dual monitors.  It’s not just the fact that both screens now display the desktop task bar.  It’s that I can so easily move between Metro and the desktop on either screen.  I can only have Metro on one screen at a time which makes entire sense given the ‘full-screen’ nature of Metro apps.  Using dual monitors feels smoother and easier than previous versions of Windows. Overall then, I’m enjoying the Windows 8 improvements.  Strangely, for all the hype (“Windows reimagined”, etc.), my perception as a ‘productivity’ user is more one of evolution than revolution.  It all feels very familiar, but just better.

  Read the article

• Stumbling Through: Visual Studio 2010 (Part II)

  I would now like to expand a little on what I stumbled through in part I of my Visual Studio 2010 post and touch on a few other features of VS 2010.  Specifically, I want to generate some code based off of an Entity Framework model and tie it up to an actual data source.  Im not going to take the easy way and tie to a SQL Server data source, though, I will tie it to an XML data file instead.  Why?  Well, why not?  This is purely for learning, there are probably much better ways to get strongly-typed classes around XML but it will force us to go down a path less travelled and maybe learn a few things along the way.  Once we get this XML data and the means to interact with it, I will revisit data binding to this data in a WPF form and see if I cant get reading, adding, deleting, and updating working smoothly with minimal code.  To begin, I will use what was learned in the first part of this blog topic and draw out a data model for the MFL (My Football League) - I dont want the NFL to come down and sue me for using their name in this totally football-related article.  The data model looks as follows, with Teams having Players, and Players having a position and statistics for each season they played: Note that when making the associations between these entities, I was given the option to create the foreign key but I only chose to select this option for the association between Player and Position.  The reason for this is that I am picturing the XML that will contain this data to look somewhat like this: <MFL> <Position/> <Position/> <Position/> <Team>     <Player>         <Statistic/>     </Player> </Team> </MFL> Statistic will be under its associated Player node, and Player will be under its associated Team node no need to have an Id to reference it if we know it will always fall under its parent.  Position, however, is more of a lookup value that will not have any hierarchical relationship to the player.  In fact, the Position data itself may be in a completely different xml file (something Id like to play around with), so in any case, a player will need to reference the position by its Id. So now that we have a simple data model laid out, I would like to generate two things based on it:  A class for each entity with properties corresponding to each entity property An IO class with methods to get data for each entity, either all instances, by Id or by parent. Now my experience with code generation in the past has consisted of writing up little apps that use the code dom directly to regenerate code on demand (or using tools like CodeSmith).  Surely, there has got to be a more fun way to do this given that we are using the Entity Framework which already has built-in code generation for SQL Server support.  Lets start with that built-in stuff to give us a base to work off of.  Right click anywhere in the canvas of our model and select Add Code Generation Item: So just adding that code item seemed to do quite a bit towards what I was intending: It apparently generated a class for each entity, but also a whole ton more.  I mean a TON more.  Way too much complicated code was generated now that code is likely to be a black box anyway so it shouldnt matter, but we need to understand how to make this work the way we want it to work, so lets get ready to do some stumbling through that text template (tt) file. When I open the .tt file that was generated, right off the bat I realize there is going to be trouble there is no color coding, no intellisense no nothing!  That is going to make stumbling through more like groping blindly in the dark while handcuffed and hopping on one foot, which was one of the alternate titles I was considering for this blog.  Thankfully, the community comes to my rescue and I wont have to cast my mind back to the glory days of coding in VI (look it up, kids).  Using the Extension Manager (Available under the Tools menu), I did a quick search for tt editor in the Online Gallery and quickly found the Tangible T4 Editor: Downloading and installing this was a breeze, and after doing so I got some color coding and intellisense while editing the tt files.  If you will be doing any customizing of tt files, I highly recommend installing this extension.  Next, well see if that is enough help for us to tweak that tt file to do the kind of code generation that we wantDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• R12.0 Cash Management Consolidated Patch Collection (CPC) And R12.1 Cash Management Recommended Patch Collection (RPC)

  - by user793553

  If you have Oracle E-Business Suite's Cash Management (CE) application installed, you'll want to be sure to install the latest CPC (Consolidated Patch Collection) if you are using a R12.0 version of the apps, or the latest RPC (Recommended Patch Collection) for the R12.1 version of the apps. These collections give you all the fixes currently available for known issues in the specified versions of the application, including all of the latest Root Cause Analysis Fixes (RCAs)! What is an "RPC" (for R12.1 users)? Since the release of 12.1, a number of recommended patches for Oracle Cash Management have been made available as standalone patches to help address important business process issues. Adoption of these patches was highly recommended at the time, but not always implemented, so to further facilitate adoption of these patches, Oracle consolidated them into product-specific Recommended Patch Collections (RPCs) - a collection of recommended patches. They were created by Oracle Development with the following goals in mind: Stability: To address data integrity issues that have been identified by Oracle Development and Oracle Software Support as having the potential to interfere with the normal completion of important business processes (such as, period close, etc.). Root Cause Fixes (RCAs): To make available root cause fixes for known data integrity issues. Compact: To keep the file footprint as small as possible to help facilitate the install process and minimize testing. Granular: To compile the collection of patches based on functional areas, allowing a customer to apply multiple RPCs at once, or in phases (based on individual needs and goals). Where to start ALL R12 Cash Management users (R12.0 and R12.1 users) should start with the following Note on My Oracle Support (MOS): Doc ID 1367845.1: R12: Cash Management Recommended Patch Collections It's a great place for important implementation information about both sets of critical patch collections! For R12.1x users R12.1 users should also take a look at the documents below for even more information about the RPC for the R12.1.x versions of the Cash Management application, and other related available RPCs: Note Number  Title                                                                                                      1489997.1 Master Troubleshooting Guide for CE: Reconciliation & Clearing [VIDEO] 954704.1 EBS: R12.1 Oracle Financials Recommended Patch Collections (RPCs) 1316506.1 R12: Oracle CE: Upgrading from R11i to R12.1: Latest Recommended Patches Patch Wizard Utility While a patch may contain several hundred files, the impact on your system may actually be minimal. Patches contain hard prerequisites that are intended to make a patch work on a very low code baseline. The Patch Wizard Utility will give you a detailed analysis of the patch’s impact on your instance BEFORE it’s applied, so you’ll know exactly what to expect from the application. Please refer to Doc ID 976188.1 for more information on this important utility

  Read the article

• GCM: onMessage() from GCMIntentService is never called [migrated]

  - by Shrikant

  I am implementing GCM (Google Cloud Messaging- PUSH Notifications) in my application. I have followed all the steps given in GCM tutorial from developer.android.com My application's build target is pointing to Goolge API 8 (Android 2.2 version). I am able to get the register ID from GCM successfully, and I am passing this ID to my application server. So the registration step is performed successfully. Now when my application server sends a PUSH message to my device, the server gets the message as SUCCESS=1 FAILURE=0, etc., i.e. Server is sending message successfully, but my device never receives the message. After searching alot about this, I came to know that GCM pushes messages on port number 5228, 5229 or 5230. Initially, my device and laptop was restricted for some websites, but then I was granted all the permissions to access all websites, so I guess these port numbers are open for my device. So my question is: I never receive any PUSH message from GCM. My onMessage() from GCMIntenService class is never called. What could be the reason? Please see my following code and guide me accordingly: I have declared following in my manifest: <uses-sdk android:minSdkVersion="8" android:targetSdkVersion="8" /> <permission android:name="package.permission.C2D_MESSAGE" android:protectionLevel="signature" /> <!-- App receives GCM messages. --> <uses-permission android:name="com.google.android.c2dm.permission.RECEIVE" /> <!-- GCM connects to Google Services. --> <uses-permission android:name="android.permission.INTERNET" /> <!-- GCM requires a Google account. --> <uses-permission android:name="android.permission.GET_ACCOUNTS" /> <!-- Keeps the processor from sleeping when a message is received. --> <uses-permission android:name="android.permission.WAKE_LOCK" /> <uses-permission android:name="package.permission.C2D_MESSAGE" /> <uses-permission android:name="android.permission.INTERNET" /> <receiver android:name="com.google.android.gcm.GCMBroadcastReceiver" android:permission="com.google.android.c2dm.permission.SEND" > <intent-filter> <action android:name="com.google.android.c2dm.intent.RECEIVE" /> <action android:name="com.google.android.c2dm.intent.REGISTRATION" /> <category android:name="packageName" /> </intent-filter> </receiver> <receiver android:name=".ReceiveBroadcast" android:exported="false" > <intent-filter> <action android:name="GCM_RECEIVED_ACTION" /> </intent-filter> </receiver> <service android:name=".GCMIntentService" /> /** * @author Shrikant. * */ public class GCMIntentService extends GCMBaseIntentService { /** * The Sender ID used for GCM. */ public static final String SENDER_ID = "myProjectID"; /** * This field is used to call Web-Service for GCM. */ SendUserCredentialsGCM sendUserCredentialsGCM = null; public GCMIntentService() { super(SENDER_ID); sendUserCredentialsGCM = new SendUserCredentialsGCM(); } @Override protected void onRegistered(Context arg0, String registrationId) { Log.i(TAG, "Device registered: regId = " + registrationId); sendUserCredentialsGCM.sendRegistrationID(registrationId); } @Override protected void onUnregistered(Context context, String arg1) { Log.i(TAG, "unregistered = " + arg1); sendUserCredentialsGCM .unregisterFromGCM(LoginActivity.API_OR_BROWSER_KEY); } @Override protected void onMessage(Context context, Intent intent) { Log.e("GCM MESSAGE", "Message Recieved!!!"); String message = intent.getStringExtra("message"); if (message == null) { Log.e("NULL MESSAGE", "Message Not Recieved!!!"); } else { Log.i(TAG, "new message= " + message); sendGCMIntent(context, message); } } private void sendGCMIntent(Context context, String message) { Intent broadcastIntent = new Intent(); broadcastIntent.setAction("GCM_RECEIVED_ACTION"); broadcastIntent.putExtra("gcm", message); context.sendBroadcast(broadcastIntent); } @Override protected void onError(Context context, String errorId) { Log.e(TAG, "Received error: " + errorId); Toast.makeText(context, "PUSH Notification failed.", Toast.LENGTH_LONG) .show(); } @Override protected boolean onRecoverableError(Context context, String errorId) { return super.onRecoverableError(context, errorId); } }

  Read the article

• Nginx + Nagios : 502 Bad gateway

  - by MrROY

  I have a fully new install nagios, but I can't access to it. Here's my Nginx config: server{ listen 80; server_name 61.148.45.10; # blahblah # Nagios Monitoring location /nagios3/ { proxy_pass http://127.0.0.1:80; } } Nagios is installed step by step(From this Linode guide): sudo apt-get install -y nagios3 Then I try to visit http://ip-address/nagios3/, but it shows 502 bad gateway. How do I deal with this ? This is my /var/log/syslog: Oct 25 14:18:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;1;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:19:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;1;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:19:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;2;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:20:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;2;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:20:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;3;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;3;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:21:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;HARD;4;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:17 my-server nagios3: SERVICE NOTIFICATION: root;localhost;Disk Space;WARNING;notify-service-by-email;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:17 my-server postfix/pickup[24474]: 4F89F394034C: uid=109 from=<nagios> Oct 25 14:21:17 my-server postfix/cleanup[27756]: 4F89F394034C: message-id=<20131025062117.4F89F394034C@my-server> Oct 25 14:21:17 my-server postfix/qmgr[24475]: 4F89F394034C: from=<nagios@[email protected]>, size=594, nrcpt=1 (queue active) Oct 25 14:21:17 my-server postfix/local[27758]: 4F89F394034C: to=<root@localhost>, relay=local, delay=0.15, delays=0.11/0/0/0.04, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 14:21:17 my-server postfix/qmgr[24475]: 4F89F394034C: removed Oct 25 14:22:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;HARD;4;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:22:07 my-server nagios3: SERVICE NOTIFICATION: root;localhost;HTTP;WARNING;notify-service-by-email;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:22:07 my-server postfix/pickup[24474]: 219CA3940381: uid=109 from=<nagios> Oct 25 14:22:07 my-server postfix/cleanup[27756]: 219CA3940381: message-id=<20131025062207.219CA3940381@my-server> Oct 25 14:22:07 my-server postfix/qmgr[24475]: 219CA3940381: from=<nagios@[email protected]>, size=605, nrcpt=1 (queue active) Oct 25 14:22:07 my-server postfix/local[27758]: 219CA3940381: to=<root@localhost>, relay=local, delay=0.12, delays=0.07/0/0/0.05, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 14:22:07 my-server postfix/qmgr[24475]: 219CA3940381: removed Oct 25 14:39:01 my-server CRON[28242]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) And there're lot of 127.0.0.1 visit in nginx log, but I actually visit from a external ip: 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36" 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36" 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36"

  Read the article

• Postfix - am I sending spam?

  - by olrehm

  today I received like 30 messages within 5 minutes telling me that some mail I send could not be delivered, mostly to *.ru email addresses which I did not send any mail to. I have my own webserver (postfix/dovecot) set up using this guide (http://workaround.org/ispmail/lenny) but adjusted a little bit for Ubuntu. I tested whether I am an Open Relay which I am apparently not. Now there are two possible reasons for the above mentioned emails: Either I am sending out spam, or somebody wants me to think that, correct? How can I check this? I selected one particular address that I supposedly send spam to. Then I searched my mail.log for this entry. I found two blocks that record that somebody from the server connected to my server and delivered some message to two different users. I cannot find an entry reporting that anyone from my server send an email to that server. Does this mean its just some mail to scare me or could it still have been send by me in the first place? Here is one such block from the log (I replaced some confidential stuff): Jun 26 23:23:28 mycustomernumber postfix/smtpd[29970]: connect from mx.webstyle.ru[195.144.251.97] Jun 26 23:23:29 mycustomernumber postfix/smtpd[29970]: 044991528995: client=mx.webstyle.ru[195.144.251.97] Jun 26 23:23:29 mycustomernumber postfix/cleanup[29974]: 044991528995: message-id=<[email protected]> Jun 26 23:23:29 mycustomernumber postfix/qmgr[3369]: 044991528995: from=<>, size=2198, nrcpt=1 (queue active) Jun 26 23:23:29 mycustomernumber amavis[28598]: (28598-11) ESMTP::10024 /var/lib/amavis/tmp/amavis-20110626T223137-28598: <> -> <[email protected]> SIZE=2198 Received: from mycustomernumber.stratoserver.net ([127.0.0.1]) by localhost (rehmsen.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP for <[email protected]>; Sun, 26 Jun 2011 23:23:29 +0200 (CEST) Jun 26 23:23:29 mycustomernumber amavis[28598]: (28598-11) Checking: YakjkrdFq6A8 [195.144.251.97] <> -> <[email protected]> Jun 26 23:23:29 mycustomernumber postfix/smtpd[29970]: disconnect from mx.webstyle.ru[195.144.251.97] Jun 26 23:23:29 mycustomernumber amavis[28598]: (28598-11) lookup_sql_field(id) (WARN: no such field in the SQL table), "[email protected]" result=undef Jun 26 23:23:32 mycustomernumber postfix/smtpd[29979]: connect from localhost.localdomain[127.0.0.1] Jun 26 23:23:32 mycustomernumber postfix/smtpd[29979]: 0A1FA1528A21: client=localhost.localdomain[127.0.0.1] Jun 26 23:23:32 mycustomernumber postfix/cleanup[29974]: 0A1FA1528A21: message-id=<[email protected]> Jun 26 23:23:32 mycustomernumber postfix/qmgr[3369]: 0A1FA1528A21: from=<>, size=2841, nrcpt=1 (queue active) Jun 26 23:23:32 mycustomernumber postfix/smtpd[29979]: disconnect from localhost.localdomain[127.0.0.1] Jun 26 23:23:32 mycustomernumber amavis[28598]: (28598-11) FWD via SMTP: <> -> <[email protected]>,BODY=7BIT 250 2.0.0 Ok, id=28598-11, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 0A1FA1528A21 Jun 26 23:23:32 mycustomernumber amavis[28598]: (28598-11) Passed CLEAN, [195.144.251.97] [195.144.251.97] <> -> <[email protected]>, Message-ID: <[email protected]>, mail_id: YakjkrdFq6A8, Hits: 2.249, size: 2197, queued_as: 0A1FA1528A21, 2882 ms Jun 26 23:23:32 mycustomernumber postfix/smtp[29975]: 044991528995: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=3.3, delays=0.39/0.01/0.01/2.9, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=28598-11, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 0A1FA1528A21) Jun 26 23:23:32 mycustomernumber postfix/qmgr[3369]: 044991528995: removed Jun 26 23:23:33 mycustomernumber postfix/smtp[29980]: 0A1FA1528A21: to=<[email protected]>, orig_to=<[email protected]>, relay=mx3.hotmail.com[65.54.188.110]:25, delay=1.2, delays=0.15/0.02/0.51/0.55, dsn=2.0.0, status=sent (250 <[email protected]> Queued mail for delivery) Jun 26 23:23:33 mycustomernumber postfix/qmgr[3369]: 0A1FA1528A21: removed Jun 26 23:26:49 mycustomernumber postfix/anvil[29972]: statistics: max connection rate 1/60s for (smtp:195.144.251.97) at Jun 26 23:23:28 Jun 26 23:26:49 mycustomernumber postfix/anvil[29972]: statistics: max connection count 1 for (smtp:195.144.251.97) at Jun 26 23:23:28 Jun 26 23:26:49 mycustomernumber postfix/anvil[29972]: statistics: max cache size 1 at Jun 26 23:23:28 I can provide more info if you tell me what you need to know. Thank you for you help!

  Read the article

• SQL Server 2008 R2 Enterprise won't install on Windows 2008 R2 Enterprise

  - by Carlos Paulino

  I've been trying to install SQL Server on a new Windows Server 2008. I have tried everything but I haven't been able to narrow down the problem. When the installation fails I get " Exit code (Decimal): -2068643839". The problem with this is that according to Microsoft this is a generic error code. I follow their guide to look into the detail.txt inside C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\ But I can't find something that specifies the exact error. Any suggestions ? Thanks in advanced. I uploaded to detail.txt to http://www.megaupload.com/?d=0MV46SZH because it is to big to paste here. Below is the summary.txt ---------- Overall summary: Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Exit code (Decimal): -2068643839 Exit facility code: 1203 Exit error code: 1 Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Start time: 2011-02-28 11:29:56 End time: 2011-02-28 11:34:45 Requested action: Install Machine Properties: Machine name: SA-SERVER Machine processor count: 8 OS version: Windows Server 2008 R2 OS service pack: Service Pack 1 OS region: United States OS language: English (United States) OS architecture: x64 Process architecture: 64 Bit OS clustered: No Product features discovered: Product Instance Instance ID Feature Language Edition Version Clustered Package properties: Description: SQL Server Database Services 2008 R2 ProductName: SQL Server 2008 R2 Type: RTM Version: 10 SPLevel: 0 Installation location: F:\x64\setup\ Installation edition: ENTERPRISE User Input Settings: ACTION: Install ADDCURRENTUSERASSQLADMIN: True AGTSVCACCOUNT: NT AUTHORITY\SYSTEM AGTSVCPASSWORD: ***** AGTSVCSTARTUPTYPE: Manual ASBACKUPDIR: Backup ASCOLLATION: Latin1_General_CI_AS ASCONFIGDIR: Config ASDATADIR: Data ASDOMAINGROUP: <empty> ASLOGDIR: Log ASPROVIDERMSOLAP: 1 ASSVCACCOUNT: <empty> ASSVCPASSWORD: ***** ASSVCSTARTUPTYPE: Automatic ASSYSADMINACCOUNTS: <empty> ASTEMPDIR: Temp BROWSERSVCSTARTUPTYPE: Disabled CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini CUSOURCE: ENABLERANU: False ENU: True ERRORREPORTING: False FARMACCOUNT: <empty> FARMADMINPORT: 0 FARMPASSWORD: ***** FEATURES: SQLENGINE,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK,OCS FILESTREAMLEVEL: 0 FILESTREAMSHARENAME: <empty> FTSVCACCOUNT: <empty> FTSVCPASSWORD: ***** HELP: False IACCEPTSQLSERVERLICENSETERMS: False INDICATEPROGRESS: False INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\ INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\ INSTALLSQLDATADIR: <empty> INSTANCEDIR: D:\SQLServer INSTANCEID: MSSQLSERVER INSTANCENAME: MSSQLSERVER ISSVCACCOUNT: NT AUTHORITY\SYSTEM ISSVCPASSWORD: ***** ISSVCSTARTUPTYPE: Automatic NPENABLED: 0 PASSPHRASE: ***** PCUSOURCE: PID: ***** QUIET: False QUIETSIMPLE: False ROLE: AllFeatures_WithDefaults RSINSTALLMODE: FilesOnlyMode RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE RSSVCPASSWORD: ***** RSSVCSTARTUPTYPE: Automatic SAPWD: ***** SECURITYMODE: SQL SQLBACKUPDIR: <empty> SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS SQLSVCACCOUNT: NT AUTHORITY\SYSTEM SQLSVCPASSWORD: ***** SQLSVCSTARTUPTYPE: Automatic SQLSYSADMINACCOUNTS: SA-SERVER\Administrator SQLTEMPDBDIR: <empty> SQLTEMPDBLOGDIR: <empty> SQLUSERDBDIR: <empty> SQLUSERDBLOGDIR: <empty> SQMREPORTING: False TCPENABLED: 1 UIMODE: Normal X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini Detailed results: Feature: Database Engine Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: SQL Client Connectivity SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Integration Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Connectivity Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Complete Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Basic Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Backwards Compatibility Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Business Intelligence Development Studio Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Microsoft Sync Framework Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Rules with failures: Global rules: Scenario specific rules: Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\SystemConfigurationCheck_Report.htm

  Read the article

• Slow login to load-balanced Terminal Server 2008 behind Gateway Server

  - by Frans

  I have a small load-balanced (using Session Broker) Terminal Server 2008 farm behind a Gateway Server which is accessed from the Internet. The problem I have is that there is a delay of 20-30 seconds if the session broker switches the user to another server during login. I think this is related to the fact that I am forcing the security layer to be RDP rather than SSL. The background The Gateway server has a public routeable IP addres and DNS name so it can be accessed from the Internet and all users come in via this route (the system is used to provide access to hosted applications to external customers). The actual terminal servers only have internal IP addresses. This works really well, except that with a Vista or Windows 7 client, the Remote Desktop client will negotiate with the server to use SSL for the security layer. This then exposes the auto-generated certificate that TS1 or TS2 has - but since they are internal, auto-generated certificates, the client will get a stern warning that the certificate is not valid. I can't give the servers a properly authorised certificate as the servers do not have public routeable IP address or DNS name. Instead, I am using Group Policy to force the connections to be over RDP instead of SSL. \Computer Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Security\Require use of specific security layer for remote (RDP) connections The Windows 7 user now gets a much less stern warning that "the server's identity cannot be confirmed" which I can live with. I don't have enough control over the end-user's machines to ask them to install a new root certificate either. TS1 and TS2 are also load-balanced using the Session Broker, which is installed on the Gateway Server. I am using round-robin DNS, so the user's initial connection will go via Gateway1 to either TS1 or TS2. TS1/TS2 will then talk to the session broker and may pass the user to the other server. I.e. the user may get connected to TS2, but after talking to the session broker the user may be passed to TS1, which is where they will run their session. When this switching of servers happens, in my setup, the screen sits with the word "Welcome" for 20-30 seconds after which it flickers, Welcome is shown again and then flashing through nthe normal login screens (i.e. "wait for user profile manager" etc). Having done some research, I think what is happening is that the user is being fully logged on to TS2 (while "Welcome" is shown) before being passed to TS1, where they are then logged in again. It is interesting that normally when you see the ""Welcome" word, the little circle to left rotates. However, it does not rotate during this delay - the screen just looks frozen. This blog post leads me to think that this is because CredSSP is not being used, probably because I am disallowing SSL and forcing RDP. What I have tried I enabled SSL again which removes the "Welcome" delay. However, it seems to introduc a new delay much earlier in the process. Specifically, when the RDP client is saying "initialising connection" - this is now much slower. Quite apart from the fact that my certificate problem precludes me using that solution without considerable difficulty. I tried disabling the load balancing (just remove the servers from the session broker farm) and the connections do not have any delay. The problem is also intermittent in the sense that it only happens when the user gets bumped from one server to another. I tested this by trying to connect directly to TS1 (via the Gateway, of course) and then checking which server I actually got connected to. Just to be sure, I also by-passed the round-robin DNS to see if it had any impact and it doesn't. The setup is essentially in line with MS recommendations here: TS Session Broker Load Balancing Step-by-Step Guide I tried changing to using a dedicated redirector. Basically, rather than using a round-robin DNS, I pointed my DNS to the Gateway server and configured it to be a dedicated redirector (disallow logons, add it to the farm). Same problem, alas. Any ideas or suggestions gratefully received.

  Read the article

• how to install ffmpeg in cpanel

  - by Ajay Chthri

  i'm using dedicated server(linux) so i need to install ffmpeg in cpanel so here ffmpeg i found in Main Software Install a Perl Module but i writing script in php so how can i install ffmpeg phpperl when i'am trying to install ffmpeg in perl module i get this response Checking C compiler....C compiler (/usr/bin/cc) OK (cached Tue Jan 17 19:16:31 2012)....Done CPAN fallback is disabled since /var/cpanel/conserve_memory exists, and cpanm is available. Method: Using Perl Expect, Installer: cpanm You have make /usr/bin/make Falling back to HTTP::Tiny 0.009 You have /bin/tar: tar (GNU tar) 1.15.1 You have /usr/bin/unzip You have Cpanel::HttpRequest 2.1 Testing connection speed...(using fast method)...Done Ping:2 (ticks) Testing connection speed to cpan.knowledgematters.net using pureperl...(28800.00 bytes/s)...Done Ping:2 (ticks) Testing connection speed to cpan.develooper.com using pureperl...(22233.33 bytes/s)...Done Ping:2 (ticks) Testing connection speed to cpan.schatt.com using pureperl...(32750.00 bytes/s)...Done Ping:3 (ticks) Testing connection speed to cpan.mirror.facebook.net using pureperl...(14050.00 bytes/s)...Done Ping:2 (ticks) Testing connection speed to cpan.mirrors.hoobly.com using pureperl...(5150.00 bytes/s)...Done Five usable mirrors located Ping:0 (ticks) Testing connection speed to 208.109.109.239 using pureperl...(28950.00 bytes/s)...Done Ping:2 (ticks) Testing connection speed to 208.82.118.100 using pureperl...(19300.00 bytes/s)...Done Ping:1 (ticks) Testing connection speed to 69.50.192.73 using pureperl...(19300.00 bytes/s)...Done Three usable fallback mirrors located Mirror Check passed for cpan.schatt.com (/index.html) Searching on cpanmetadb ... Fetching http://cpanmetadb.cpanel.net/v1.0/package/Video::FFmpeg?cpanel_version=11.30.5.6&cpanel_tier=release (connected:0).......(request attempt 1/12)...Using dns cache file /root/.HttpRequest/cpanmetadb.cpanel.net......searching for mirrors (mirror search attempt 1/3)......5 usable mirrors located. (less then expected)......mirror search success......connecting to 208.74.123.82...@208.74.123.82......connected......receiving...100%......request success......Done Searching Video::FFmpeg on cpanmetadb (http://cpanmetadb.cpanel.net/v1.0/package/Video::FFmpeg?cpanel_version=11.30.5.6&cpanel_tier=release) ... Fetching http://cpanmetadb.cpanel.net/v1.0/package/Video::FFmpeg?cpanel_version=11.30.5.6&cpanel_tier=release (connected:1).......(request attempt 1/12)[email protected]%......request success......Done Source: fastest CPAN mirror ... --> Working on Video::FFmpeg Fetching http://cpan.schatt.com//authors/id/R/RA/RANDOMMAN/Video-FFmpeg-0.47.tar.gz ... Fetching http://cpan.schatt.com/authors/id/R/RA/RANDOMMAN/Video-FFmpeg-0.47.tar.gz (connected:1).......(request attempt 1/12)...Resolving cpan.schatt.com...(resolve attempt 1/65)......connecting to 66.249.128.125...@66.249.128.125......connected......receiving...25%...50%...75%...100%......request success......Done OK Unpacking Video-FFmpeg-0.47.tar.gz Video-FFmpeg-0.47/ Video-FFmpeg-0.47/Changes Video-FFmpeg-0.47/FFmpeg.xs Video-FFmpeg-0.47/MANIFEST Video-FFmpeg-0.47/META.yml Video-FFmpeg-0.47/Makefile.PL Video-FFmpeg-0.47/README Video-FFmpeg-0.47/lib/ Video-FFmpeg-0.47/lib/Video/ Video-FFmpeg-0.47/lib/Video/FFmpeg/ Video-FFmpeg-0.47/lib/Video/FFmpeg/AVFormat.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/ Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/Audio.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/Subtitle.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/Video.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream.pm Video-FFmpeg-0.47/lib/Video/FFmpeg.pm Video-FFmpeg-0.47/ppport.h Video-FFmpeg-0.47/t/ Video-FFmpeg-0.47/t/Video-FFmpeg.t Video-FFmpeg-0.47/test Video-FFmpeg-0.47/test.mp4 Video-FFmpeg-0.47/typemap Entering Video-FFmpeg-0.47 Checking configure dependencies from META.yml META.yml not found or unparsable. Fetching META.yml from search.cpan.org Fetching http://search.cpan.org/meta/Video-FFmpeg-0.47/META.yml (connected:1).......(request attempt 1/12)...Resolving search.cpan.org...(resolve attempt 1/65)......connecting to 199.15.176.161...@199.15.176.161......connected......receiving...100%......request success......Done Configuring Video-FFmpeg-0.47 ... Running Makefile.PL Perl v5.10.0 required--this is only v5.8.8, stopped at Makefile.PL line 1. BEGIN failed--compilation aborted at Makefile.PL line 1. N/A ! Configure failed for Video-FFmpeg-0.47. See /home/.cpanm/build.log for details. Perl Expect failed with non-zero exit status: 256 All available perl module install methods have failed guide me how can i install ffmpeg in cPanel Thanks for advance.

  Read the article

• Squid w/ SquidGuard fails w/ "Too few redirector processes are running"

  - by DKNUCKLES

  I'm trying to implement a Squid proxy in a quick and easy fashion and I'm receiving some errors I have been unable to resolve. The box is a pre-made appliance, however it seems to fail on launch.The following is the cache.log file when I attempt to launch the squid service. 2012/11/18 22:14:29| Starting Squid Cache version 3.0.STABLE20-20091201 for i686 -pc-linux-gnu... 2012/11/18 22:14:29| Process ID 12647 2012/11/18 22:14:29| With 1024 file descriptors available 2012/11/18 22:14:29| Performing DNS Tests... 2012/11/18 22:14:29| Successful DNS name lookup tests... 2012/11/18 22:14:29| DNS Socket created at 0.0.0.0, port 40513, FD 8 2012/11/18 22:14:29| Adding nameserver 192.168.0.78 from /etc/resolv.conf 2012/11/18 22:14:29| Adding nameserver 8.8.8.8 from /etc/resolv.conf 2012/11/18 22:14:29| helperOpenServers: Starting 5/5 'bin' processes 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| helperOpenServers: Starting 5/5 'squid-auth.pl' processes 2012/11/18 22:14:29| User-Agent logging is disabled. 2012/11/18 22:14:29| Referer logging is disabled. 2012/11/18 22:14:29| Unlinkd pipe opened on FD 23 2012/11/18 22:14:29| Swap maxSize 10240000 + 8192 KB, estimated 788322 objects 2012/11/18 22:14:29| Target number of buckets: 39416 2012/11/18 22:14:29| Using 65536 Store buckets 2012/11/18 22:14:29| Max Mem size: 8192 KB 2012/11/18 22:14:29| Max Swap size: 10240000 KB 2012/11/18 22:14:29| Version 1 of swap file with LFS support detected... 2012/11/18 22:14:29| Rebuilding storage in /opt/squid3/var/cache (DIRTY) 2012/11/18 22:14:29| Using Least Load store dir selection 2012/11/18 22:14:29| Set Current Directory to /opt/squid3/var/cache 2012/11/18 22:14:29| Loaded Icons. 2012/11/18 22:14:29| Accepting HTTP connections at 10.0.0.6, port 3128, FD 25. 2012/11/18 22:14:29| Accepting ICP messages at 0.0.0.0, port 3130, FD 26. 2012/11/18 22:14:29| HTCP Disabled. 2012/11/18 22:14:29| Ready to serve requests. 2012/11/18 22:14:29| Done reading /opt/squid3/var/cache swaplog (0 entries) 2012/11/18 22:14:29| Finished rebuilding storage from disk. 2012/11/18 22:14:29| 0 Entries scanned 2012/11/18 22:14:29| 0 Invalid entries. 2012/11/18 22:14:29| 0 With invalid flags. 2012/11/18 22:14:29| 0 Objects loaded. 2012/11/18 22:14:29| 0 Objects expired. 2012/11/18 22:14:29| 0 Objects cancelled. 2012/11/18 22:14:29| 0 Duplicate URLs purged. 2012/11/18 22:14:29| 0 Swapfile clashes avoided. 2012/11/18 22:14:29| Took 0.02 seconds ( 0.00 objects/sec). 2012/11/18 22:14:29| Beginning Validation Procedure 2012/11/18 22:14:29| WARNING: redirector #1 (FD 9) exited 2012/11/18 22:14:29| WARNING: redirector #2 (FD 10) exited 2012/11/18 22:14:29| WARNING: redirector #3 (FD 11) exited 2012/11/18 22:14:29| WARNING: redirector #4 (FD 12) exited 2012/11/18 22:14:29| Too few redirector processes are running FATAL: The redirector helpers are crashing too rapidly, need help! Squid Cache (Version 3.0.STABLE20-20091201): Terminated abnormally. CPU Usage: 0.112 seconds = 0.032 user + 0.080 sys Maximum Resident Size: 0 KB Page faults with physical i/o: 0 Memory usage for squid via mallinfo(): total space in arena: 2944 KB Ordinary blocks: 2857 KB 6 blks Small blocks: 0 KB 0 blks Holding blocks: 1772 KB 8 blks Free Small blocks: 0 KB Free Ordinary blocks: 86 KB Total in use: 4629 KB 157% Total free: 86 KB 3% The "permission denied" area is where I have been focusing my attention with no luck. The following is what I've tried. Chmod'ing the /opt/squidguard/bin folder to 777 Changing the user that squidguard runs under to root / nobody / www-data / squid3 Tried changing ownership of the /opt/squidguard/bin folder to all names listed above after assigning that user to run with squid. Any help with this would be greatly appreciated.

  Read the article

• AdPrep logs show an LDAP error

  - by Omar

  What I am trying to do is transition our domain from Server 2003 Enterprise x32 to Server 2008 R2 Enterprise x64. Here is what I have done thus far. The 2003 server is a physical machine, the 2008 server is a virtual machine Built a virtual machine that has Server 2008 R2 Enterprise x64 and joined it to the domain as a domain member On the 2003 DC, Raised Domain Functional Level and Forest Functional Level to Windows Server 2003 On the 2003 DC, went into the registry and navigated to HKLM\SYSTEM\CurrentControlSet\Services\NTDS\Parameters and verified that the Schema Version is 30 On the 2003 DC, inserted the Windows Server 2008 Enterprise x32 Edition to copy over the adprep folder. This version is the only one that seemed to work On the 2003 DC, opened command prompt and went to adprep directory and ran adprep /forestprep , adprep /domainprep , and adprep /domainprep /gpprep On the 2008 server, Installed the Active Directory Domain Services role from Server Manager On the 2003 DC, went into the registry and navigated to HKLM\SYSTEM\CurrentControlSet\Services\NTDS\Parameters and verified that the Schema Version is now 44 When I go to run dcpromo on the 2008 server, I get a message that says: "To install a domain controller into this Active Directory forest, you must first prepare using adprep /forestprep" I went back to the 2003 DC server and went through the adprep logs and I came across this: Adprep was unable to modify the security descriptor on object CN=DomainControllerAuthentication,CN=Certificate Templates,CN=Public Key Services,CN=Services,CN=Configuration,DC=xeroxtoledo,DC=com. [Status/Consequence] ADPREP was unable to merge the existing security descriptor with the new access control entry (ACE). [User Action] Check the log file ADPrep.log in the C:\WINDOWS\debug\adprep\logs\20100327143517 directory for more information. Adprep encountered an LDAP error. *Error code: 0x20. Server extended error code: 0x208d, Server error message: 0000208D: NameErr: DSID-031001CD, problem 2001 (NO_OBJECT), data 0, best match of: 'CN=Certificate Templates,CN=Public Key Services,CN=Services,CN=Configuration,DC=xeroxtoledo,DC=com* In fact, I got three of these errors. The LDAP error is consistent with all three, but the top part where it says "Adprep was unable to modify the security descriptor on object" are different. They are the following: CN=DomainControllerAuthentication,CN=Certificate Templates,CN=Public Key Services,CN=Services,CN=Configuration,DC=xeroxtoledo,DC=com. CN=DirectoryEmailReplication,CN=Certificate Templates,CN=Public Key Services,CN=Services,CN=Configuration,DC=xeroxtoledo,DC=com. CN=KerberosAuthentication,CN=Certificate Templates,CN=Public Key Services,CN=Services,CN=Configuration,DC=xeroxtoledo,DC=com. The credentials I am using on the 2008 server when running dcpromo is my domain account. My account is part of the domain and enterprise admin groups. I've tried various quick fixes that I've came across through Google searches that include: Disabling AntiVirus on current DCs Pointing DNS on PDC to point to itself Changing the Schema Update Allowed key to 1 and tried rerunning adprep - when rerunning adprep, told me that Forest-wide information has already been updated Disabled Windows Firewall on the Server 2008 box On the 2003 DC, went to Domain Controller Security Policy Local Policies User Rights Assignment and added Domain Admins to the Enable computer and user accounts to be trusted for delegation policy setting Both our PDC and BDC are Global Catalog Servers. Not sure if this matters or not I ran the command netdom query fsmo and verified that the FSMO role holder is the current 2003 PDC I ran dcdiag /v on the 2003 PDC and the only thing that failed was Services. Dnscache Service is stopped on the PDC I even went as far as deleting the virtual machine and recreating it from scratch - no avail... Help :(

  Read the article

• Apache outputs all urls of a second domain as a subfolder of the primary domain name

  - by s_rathbone

  Hi all, would anyone be able to possibly give me some guidance.. Basically, i have a 'shared hosting' account with a large internet hosting provider, and my account lets me have multiple seperate domains within this folder structure.(note: not aliased domains and not sub domains). so, my goal is to have 2 domains set up. i have already purchased the two domain names i need: The first domain is the 'primary' domain name for the root folder(eg. www.example1.com) and the second domain name is set for one of its sub folders(eg. www.example2.com is set to the folder www.example1.com/sites/music). The problem is that when apache returns a page of the second domain back to the browser, apache writes the hyperlinks as if it's a sub folder of the first domain ( eg. www.example2.com/index.html. comes out as http://www.example1.com/sites/music/index.html). Now, I have done some reading on this, looking though "Apache: the definitive guide"(o'reilly), and although it was useful, couldn't really find the answer. i'm guessing this issue is most likely an apache setup issue in http.conf, rather than an issue with the hosting company itself (which is why im posting it here) and I have also been to the official documentation for apache site, and i am guessing i might need to use something like the rewritebase directive in htaccess files.. but im really not sure, im more of a java programmer guy, and have been struggling with this for a couple of days. Any guidance would be REALLY appreciated. If it helps, my hosting company is godaddy, and my sites are hosted on linux. My problem was originally with wordpress which i reinstalled a number of times in various ways to correct the problem, but ive just done a test with a very simple static html, and it still has the same issue with relative urls like this: <html> <head></head><body><a href="images/dog.html">Pictures of Dogs</a></body> </html> However, it is fine if i hardcode the urls like this: <html> <head></head><body><a href="http://www.example2.com/images/dog.html">Pictures of Dogs</a></body> </html> Thanks heaps, Steve R NOW FIXED Ok, the problem has now been fixed, and i didn't need to modify any .conf or .htaccess files. The problem was, that when I went to install the second application into a second domain from the godaddy site, one of the setup questions is that it asks you which site you want it installed to. after that it asks for the desired folder path. However, the problem was that the second domain name was already pointing to the correct subfolder of the primary domain. So when I started installing wordpress again and came to the menu to select which site it was for, and it listed only the primary domain as an option, i assumed that this was like a label of "which hosting account?", or "which primary domain will your application will be installed under?" because I already knew that in the next step i was specifiying the folder. In order to correct this, you must make sure that your second domain is added to your domain list so that it will be listed as an option during the installation process. For further details please read tystips.com/archives/52/how2-save-money-host-multiple-wordpress-blogs-on-a-single-godaddy-hosting-account/

  Read the article

• Oracle performance problem

  - by jreid42

  We are using an Oracle 11G machine that is very powerful; has redundant storage etc. It's a beast from what I have been told. We just got this DB for a tool that when I first came on as a coop had like 20 people using, now its upwards of 150 people. I am the only one working on it :( We currently have a system in place that distributes PERL scripts across our entire data center essentially giving us a sort of "grid" computing power. The Perl scripts run a sort of simulation and report back the results to the database. They do selects / inserts. The load is not very high for each script but it could be happening across 20-50 systems at the same time. We then have multiple data centers and users all hitting the same database with this same approach. Our main problem with this is that our database is getting overloaded with connections and having to drop some. We sometimes have upwards of 500 connections. These are old perl scripts and they do not handle this well. Essentially they fail and the results are lost. I would rather avoid having to rewrite a lot of these as they are poorly written, and are a headache to even look at. The database itself is not overloaded, just the connection overhead is too high. We open a connection, make a quick query and then drop the connection. Very short connections but many of them. The database team has basically said we need to lower the number of connections or they are going to ignore us. Because this is distributed across our farm we cant implement persistent connections. I do this with our webserver; but its on a fixed system. The other ones are perl scripts that get opened and closed by the distribution tool and thus arent always running. What would be my best approach to resolving this issue? The scripts themselves can wait for a connection to be open. They do not need to act immediately. Some sort of queing system? I've been suggested to set up a few instances of a tool called "SQL Relay". Maybe one in each data center. How reliable is this tool? How good is this approach? Would it work for what we need? We could have one for each data center and relay requests through it to our main database, keeping a pipeline of open persistent connections? Does this make sense? Is there any other suggestions you can make? Any ideas? Any help would be greatly appreciated. Sadly I am just a coop student working for a very big company and somehow all of this has landed all on my shoulders (there is literally nobody to ask for help; its a hardware company, everybody is hardware engineers, and the database team is useless and in India) and I am quite lost as what the best approach would be? I am extremely overworked and this problem is interfering with on going progress and basically needs to be resolved as quickly as possible; preferably without rewriting the whole system, purchasing hardware (not gonna happen), or shooting myself in the foot. HELP LOL!

  Read the article

• Building nginx 1.0.4 on Amazon EC2 micro - perl and python problems

  - by digitaltoast

  I'd like to run nginx as a reverse proxy with apache2 on my EC2 micro instance. yum install nginx gives me nginx-0.8.53-1.2.amzn1.x86_64.rpm The current nginx is 1.0.4 I found and followed this guide: http://kdn2.info/2011/05/install-nginx-on-amazon-ec2/ It works fine up to and including "make". When I get to checkinstall --fstrans=no I get ERROR: ld.so: object '/usr/lib/installwatch.so' from LD_PRELOAD cannot be preloaded: ignored. test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' ERROR: ld.so: object '/usr/lib/installwatch.so' from LD_PRELOAD cannot be preloaded: ignored. make[1]: Leaving directory `/root/src/nginx-1.0.4' ======================== Installation successful ========================== Copying documentation directory... ./ ./CHANGES ./LICENSE ./README cp: cannot stat `//var/tmp/gRWoVgIcdbmjfTjoVGBM/newfiles.tmp': No such file or directory Copying files to the temporary directory...OK Striping ELF binaries and libraries...OK Compressing man pages...OK Building file list...OK Building RPM package... FAILED! *** Failed to build the package ...and the logfile is full of: Building target platforms: x86_64 Building for target x86_64 Processing files: nginx-1.0.4-1.x86_64 error: File not found: /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/usr error: File not found: /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/usr/doc There IS /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/ but no /usr Following further down the page, it says: "If we want to use, for example, PHP 5.2 we can download PHP and Nginx compatible with Amazon Kernel(Xen Kernel) from the CentosALT Repository." So I install the two repositories, but when I yum install http://centos.alt.ru/pub/nginx/1.0/RPMS/x86_64/nginx-stable-1.0.4-1.el5.x86_64.rpm I get Error: Package: nginx-stable-1.0.4-1.el5.x86_64 (/nginx-stable-1.0.4-1.el5.x86_64) Requires: perl(:MODULE_COMPAT_5.8.8) You could try using --skip-broken to work around the problem but that doesn't fix it. When I do yum update, I get --> Finished Dependency Resolution Error: Package: python-distribute-0.6.19-10.1.x86_64 (devel_languages_python) Requires: python < 2.5 Installed: 1:python-2.6-1.19.amzn1.noarch (@amzn-main) python = 1:2.6-1.19.amzn1 Error: Package: python-distribute-0.6.19-10.1.i586 (devel_languages_python) Requires: python < 2.5 Installed: 1:python-2.6-1.19.amzn1.noarch (@amzn-main) python = 1:2.6-1.19.amzn1 I've tried everything - yum clean all and various other suggestions found on other sites. If anyone has any suggestions or a known package of the current 1.04 nginx working on EC2 Micro (Linux ip-10-56-63-85 2.6.35.11-83.9.amzn1.x86_64 #1 SMP Sat Feb 19 23:42:04 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux - which I think is RHEL 5?) then I'd be grateful. Incidentally, does this repolist look right? repo id repo name status CentALT CentALT Packages for Enterprise Linux 5 - x86_64 enabled: 112+157 amzn-main amzn-main-Base enabled: 2,706 amzn-main-debuginfo amzn-main-debuginfo disabled amzn-main-nosrc amzn-main-nosrc disabled amzn-updates amzn-updates-Base enabled: 328 amzn-updates-debuginfo amzn-updates-debuginfo disabled amzn-updates-nosrc amzn-updates-nosrc disabled devel_languages_python Python and Python Modules (SLE_10) enabled: 1,452+768 epel Extra Packages for Enterprise Linux 5 - x86_64 enabled: 5,892+604 epel-debuginfo Extra Packages for Enterprise Linux 5 - x86_64 - Debug disabled epel-source Extra Packages for Enterprise Linux 5 - x86_64 - Source disabled epel-testing Extra Packages for Enterprise Linux 5 - Testing - x86_64 disabled epel-testing-debuginfo Extra Packages for Enterprise Linux 5 - Testing - x86_64 - Debug disabled epel-testing-source Extra Packages for Enterprise Linux 5 - Testing - x86_64 - Source disabled s3tools Tools for managing Amazon S3 - Simple Storage Service (RHEL_6) enabled: 2+1 repolist: 10,492

  Read the article

• Postfix - Gmail - Mountain Lion // can't send mail

  - by miako

  I have read most of the tutorials found on google but still can't make it work. I run the command : date | mail -s "Test" [email protected] . The log is this : Oct 22 11:38:00 XXX.local postfix/master[288]: daemon started -- version 2.9.2, configuration /etc/postfix Oct 22 11:38:00 XXX.local postfix/pickup[289]: 9D85418A031: uid=501 from=<me> Oct 22 11:38:00 XXX.local postfix/cleanup[291]: 9D85418A031: message-id=<[email protected]> Oct 22 11:38:00 XXX.local postfix/qmgr[290]: 9D85418A031: from=<[email protected]>, size=327, nrcpt=1 (queue active) Oct 22 11:38:00 XXX.local postfix/smtp[293]: initializing the client-side TLS engine Oct 22 11:38:02 XXX.local postfix/smtp[293]: setting up TLS connection to smtp.gmail.com[173.194.70.109]:587 Oct 22 11:38:02 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: TLS cipher list "ALL:!EXPORT:!LOW:+RC4:@STRENGTH:!eNULL" Oct 22 11:38:02 XXX.local postfix/smtp[293]: SSL_connect:before/connect initialization Oct 22 11:38:02 XXX.local postfix/smtp[293]: SSL_connect:SSLv2/v3 write client hello A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server hello A Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=2 verify=0 subject=/C=US/O=GeoTrust Inc./CN=GeoTrust Global CA Oct 22 11:38:03 --- last message repeated 1 time --- Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=1 verify=1 subject=/C=US/O=Google Inc/CN=Google Internet Authority G2 Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=0 verify=1 subject=/C=US/ST=California/L=Mountain View/O=Google Inc/CN=smtp.gmail.com Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server certificate A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server done A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write client key exchange A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write change cipher spec A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write finished A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 flush data Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server session ticket A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read finished A Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: subject_CN=smtp.gmail.com, issuer_CN=Google Internet Authority G2, fingerprint E4:CA:10:85:C3:53:00:E6:A1:D2:AC:C4:35:E4:A2:10, pkey_fingerprint=D6:06:2E:15:AF:DF:E9:50:A5:B4:E2:E4:C5:2E:F9:BA Oct 22 11:38:03 XXX.local postfix/smtp[293]: Untrusted TLS connection established to smtp.gmail.com[173.194.70.109]:587: TLSv1 with cipher RC4-SHA (128/128 bits) Oct 22 11:38:03 XXX.local postfix/smtp[293]: 9D85418A031: to=<[email protected]>, relay=smtp.gmail.com[173.194.70.109]:587, delay=3.4, delays=0.26/0.13/2.8/0.26, dsn=5.5.1, status=bounced (host smtp.gmail.com[173.194.70.109] said: 530-5.5.1 Authentication Required. Learn more at 530 5.5.1 http://support.google.com/mail/bin/answer.py?answer=14257 s3sm54097220eeo.3 - gsmtp (in reply to MAIL FROM command)) Oct 22 11:38:04 XXX.local postfix/cleanup[291]: D4D2F18A03C: message-id=<[email protected]> Oct 22 11:38:04 XXX.local postfix/qmgr[290]: D4D2F18A03C: from=<>, size=2382, nrcpt=1 (queue active) Oct 22 11:38:04 XXX.local postfix/bounce[297]: 9D85418A031: sender non-delivery notification: D4D2F18A03C Oct 22 11:38:04 XXX.local postfix/qmgr[290]: 9D85418A031: removed Oct 22 11:38:04 XXX.local postfix/local[298]: D4D2F18A03C: to=<[email protected]>, relay=local, delay=0.11, delays=0/0.08/0/0.02, dsn=2.0.0, status=sent (delivered to mailbox) Oct 22 11:38:04 XXX.local postfix/qmgr[290]: D4D2F18A03C: removed Oct 22 11:39:00 XXX.local postfix/master[288]: master exit time has arrived I am really confused as i have never setup MTA again an i need it for local web development. I don't use XAMPP. I use the built in Servers. Can anyone guide me?

  Read the article

• Integrating HP Systems Insight Manager into an existing environment

  - by ewwhite

  I'm working with an environment that spans multiple data centers/sites and consists primarily of HP ProLiant servers (G5-G7) running Linux. The mix is 30% RHEL/CentOS, the rest are Gentoo :(. I also have a few dozen virtual machines running back-office and Windows servers on VMWare ESX hosts. I run OpenNMS to pull SNMP data from the various server nodes and networking devices. While OpenNMS works wonderfully for up/down, thresholds and notifications, it's native handling of traps is a little rough and the graphs are not particularly pretty. I use Orca/RRD graphs for performance trending and nice graphs. I'm tasked with inventorying the environment and wanted to come up with a clean way to organize server information. Since my environment is mostly HP, I've been playing with HP Systems Insight Manager as a way to extract server data and to deploy HP health/monitoring packages and firmware. The Gentoo systems eventually have to be converted to CentOS, so getting a quick assessment of what hardware is where would be great. Although I've read through a few hundred pages of HP manuals, I'm having a difficult time understanding how to get HP SIM to do what I want, though. My main problems are: I have about 40 subnets to deal with; 98% connected with private lines to facilities across the globe. I don't want to initiate an HP SIM discovery only to pull back every piece of intermediate networking hardware and equipment from all of the locations. I'd like this to focus on the servers. I have OpenNMS configured to accept traps. I don't want HP SIM to duplicate that effort. It seems like the built-in software deployment tool wants to overwrite the trapsink parameters for the systems it encounters during discovery. I have about 10 administrative username/password combinations in use across this infrastructure. Is there a more efficient way to get HP SIM to do the discovery or break discovery into manageable chunks? In terms of general workflow, do people typically install the HP Management Agents during the initial OS deployment (e.g. kickstart post script) or afterwards from HP SIM? Is HP SIM too thick/fat to be an inventory tool? I can't tell if it's meant to be used standalone or alongside other monitoring products. Since the majority of the systems I'm trying to track are those running Gentoo (in order to plan the move to CentOS), is there any way for HP SIM to extract system model information from them ( like dmidecode)? I have systems here where I may have an SSH key established, but not direct user or login access. Is there a way for me to import an SSH private/public key pair into HP SIM to reach out to the servers that can't accept standard credentials? There are a handful of sites where I have inconsistent access or have a double-NAT situation. I may be able to poke a server, but it may not be able to find its way back to the management system. Is there a workaround for this? The certificate configuration for HP SIM seems complicated. What is the preferred setup for trust between systems? I'd also appreciate any notes or recommendations to using this product. Or if there's a better way to do this, I'd like to know.

  Read the article

• Ubuntu 12.04 KVM running Ubuntu 12.04 with linux-image-virtual crash on boot

  - by D.Mill

  One of my VMs is stuck on "pause" in virsh. If I destroy and restart it, it will go to pause after a bit of time as "running". I can at best enter my username at login if I'm quick but it'll then shutdown. I don't know where to start with this so any help would be great!! I can access the VMs files via guestfish. the kern.log and syslog don't populate new lines. This is the last input I get from kern.log: Dec 13 11:21:08 soft201 kernel: imklog 5.8.6, log source = /proc/kmsg started. Dec 13 11:21:08 soft201 kernel: [ 0.000000] Initializing cgroup subsys cpuset Dec 13 11:21:08 soft201 kernel: [ 0.000000] Initializing cgroup subsys cpu Dec 13 11:21:08 soft201 kernel: [ 0.000000] Linux version 3.2.0-34-virtual (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #53-Ubuntu SMP Thu Nov 15 11:08:40 UTC 2012 (Ubuntu 3.2.0-34.53-virtual 3.2.33) Dec 13 11:21:08 soft201 kernel: [ 0.000000] Command line: root=UUID=61d48b48-a06a-48fb-842e-b38014086a93 ro quiet splash Dec 13 11:21:08 soft201 kernel: [ 0.000000] KERNEL supported cpus: Dec 13 11:21:08 soft201 kernel: [ 0.000000] Intel GenuineIntel Dec 13 11:21:08 soft201 kernel: [ 0.000000] AMD AuthenticAMD Dec 13 11:21:08 soft201 kernel: [ 0.000000] Centaur CentaurHauls Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-provided physical RAM map: Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfffc000 (usable) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000dfffc000 - 00000000e0000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000a20000000 (usable) Dec 13 11:21:08 soft201 kernel: [ 0.000000] NX (Execute Disable) protection: active Dec 13 11:21:08 soft201 kernel: [ 0.000000] DMI 2.4 present. Dec 13 11:21:08 soft201 kernel: [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 Dec 13 11:21:08 soft201 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Dec 13 As you can see the last line gets cut off. I don't even know if this is that relevant. dmesg logs are empty. The qemu log for the VM returns this: 2012-12-13 12:29:47.584+0000: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-1.0 -enable-kvm -m 40960 -smp 14,sockets=14,cores=1,threads=1 -name numerink201 -uuid f4a889ed-a089-05d0-cc9d-9825ab1faeba -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/numerink201.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -drive file=/var/lib/libvirt/images/client.soft.fr/tmpcZAD9U.qcow2,if=none,id=drive-ide0-0-0,format=qcow2 -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -fsdev local,security_model=none,id=fsdev-fs0,path=/home/shared_folders/soft201 -device virtio-9p-pci,id=fs0,fsdev=fsdev-fs0,mount_tag=hostshare,bus=pci.0,addr=0x5 -netdev tap,fd=18,id=hostnet0 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=02:00:00:1d:b9:e7,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 127.0.0.1:0 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/3 qemu: terminating on signal 15 from pid 28248 2012-12-13 12:30:14.455+0000: shutting down I've added more logging, libvirt.log gives me this: 2012-12-13 13:24:38.525+0000: 27694: info : libvirt version: 0.9.8 2012-12-13 13:24:38.525+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:38.525+0000: 27694: warning : qemuCapsInit:856 : Failed to get host power management capabilities 2012-12-13 13:24:39.865+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:39.865+0000: 27694: warning : lxcCapsInit:77 : Failed to get host power management capabilities 2012-12-13 13:24:39.866+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:39.866+0000: 27694: warning : umlCapsInit:87 : Failed to get host power management capabilities I don't really know where to go from here. I'll post whatever info you require

  Read the article

• ERROR 2003 (HY000): Can't connect to MySQL server on (111)

  - by JohnMerlino

  I am unable to connect to on my ubuntu installation a remote tcp/ip which contains a mysql installation: viggy@ubuntu:~$ mysql -u user.name -p -h xxx.xxx.xxx.xxx -P 3306 Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on 'xxx.xxx.xxx.xxx' (111) I commented out the line below using vim in /etc/mysql/my.cnf: # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 Then I restarted the server: sudo service mysql restart But still I get the same error. This is the content of my.cnf: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf. # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ (Note that I can log into my local mysql install just fine by running mysql (and it will log me in as root) and also note that I can get into mysql in the remote server by logging into via ssh and then invoking mysql), but I am unable to connect to the remote server via my terminal using the host, and I need to do it that way so that I can then use mysql workbench.

  Read the article

• High Load mysql on Debian server

  - by Oleg Abrazhaev

  I have Debian server with 32 gb memory. And there is apache2, memcached and nginx on this server. Memory load always on maximum. Only 500m free. Most memory leak do MySql. Apache only 70 clients configured, other services small memory usage. When mysql use all memory it stops. And nothing works, need mysql reboot. Mysql configured use maximum 24 gb memory. I have hight weight InnoDB bases. (400000 rows, 30 gb). And on server multithread daemon, that makes many inserts in this tables, thats why InnoDB. There is my mysql config. [mysqld] # # * Basic Settings # default-time-zone = "+04:00" user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking default-time-zone='Europe/Moscow' # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # # * Fine Tuning # #low_priority_updates = 1 concurrent_insert = ALWAYS wait_timeout = 600 interactive_timeout = 600 #normal key_buffer_size = 2024M #key_buffer_size = 1512M #70% hot cache key_cache_division_limit= 70 #16-32 max_allowed_packet = 32M #1-16M thread_stack = 8M #40-50 thread_cache_size = 50 #orderby groupby sort sort_buffer_size = 64M #same myisam_sort_buffer_size = 400M #temp table creates when group_by tmp_table_size = 3000M #tables in memory max_heap_table_size = 3000M #on disk open_files_limit = 10000 table_cache = 10000 join_buffer_size = 5M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #myisam_use_mmap = 1 max_connections = 200 thread_concurrency = 8 # # * Query Cache Configuration # #more ignored query_cache_limit = 50M query_cache_size = 210M #on query cache query_cache_type = 1 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log server-id = 1 log-bin = /var/lib/mysql/mysql-bin #replicate-do-db = gate log-bin-index = /var/lib/mysql/mysql-bin.index log-error = /var/lib/mysql/mysql-bin.err relay-log = /var/lib/mysql/relay-bin relay-log-info-file = /var/lib/mysql/relay-bin.info relay-log-index = /var/lib/mysql/relay-bin.index binlog_do_db = 24avia expire_logs_days = 10 max_binlog_size = 100M read_buffer_size = 4024288 innodb_buffer_pool_size = 5000M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 8 table_definition_cache = 2000 group_concat_max_len = 16M #binlog_do_db = gate #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. #skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 500M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M key_buffer_size = 512M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ Please, help me make it stable. Memory used /etc/mysql # free total used free shared buffers cached Mem: 32930800 32766424 164376 0 139208 23829196 -/+ buffers/cache: 8798020 24132780 Swap: 33553328 44660 33508668 Maybe my problem not in memory, but MySQL stops every day. As you can see, cache memory free 24 gb. Thank to Michael Hampton? for correction. Load overage on server 3.5. Maybe hdd or another problem? Maybe my config not optimal for 30gb InnoDB ?

  Read the article

• Recommendations for distributed processing/distributed storage systems

  - by Eddie

  At my organization we have a processing and storage system spread across two dozen linux machines that handles over a petabyte of data. The system right now is very ad-hoc; processing automation and data management is handled by a collection of large perl programs on independent machines. I am looking at distributed processing and storage systems to make it easier to maintain, evenly distribute load and data with replication, and grow in disk space and compute power. The system needs to be able to handle millions of files, varying in size between 50 megabytes to 50 gigabytes. Once created, the files will not be appended to, only replaced completely if need be. The files need to be accessible via HTTP for customer download. Right now, processing is automated by perl scripts (that I have complete control over) which call a series of other programs (that I don't have control over because they are closed source) that essentially transforms one data set into another. No data mining happening here. Here is a quick list of things I am looking for: Reliability: These data must be accessible over HTTP about 99% of the time so I need something that does data replication across the cluster. Scalability: I want to be able to add more processing power and storage easily and rebalance the data on across the cluster. Distributed processing: Easy and automatic job scheduling and load balancing that fits with processing workflow I briefly described above. Data location awareness: Not strictly required but desirable. Since data and processing will be on the same set of nodes I would like the job scheduler to schedule jobs on or close to the node that the data is actually on to cut down on network traffic. Here is what I've looked at so far: Storage Management: GlusterFS: Looks really nice and easy to use but doesn't seem to have a way to figure out what node(s) a file actually resides on to supply as a hint to the job scheduler. GPFS: Seems like the gold standard of clustered filesystems. Meets most of my requirements except, like glusterfs, data location awareness. Ceph: Seems way to immature right now. Distributed processing: Sun Grid Engine: I have a lot of experience with this and it's relatively easy to use (once it is configured properly that is). But Oracle got its icy grip around it and it no longer seems very desirable. Both: Hadoop/HDFS: At first glance it looked like hadoop was perfect for my situation. Distributed storage and job scheduling and it was the only thing I found that would give me the data location awareness that I wanted. But I don't like the namename being a single point of failure. Also, I'm not really sure if the MapReduce paradigm fits the type of processing workflow that I have. It seems like you need to write all your software specifically for MapReduce instead of just using Hadoop as a generic job scheduler. OpenStack: I've done some reading on this but I'm having trouble deciding if it fits well with my problem or not. Does anyone have opinions or recommendations for technologies that would fit my problem well? Any suggestions or advise would be greatly appreciated. Thanks!

  Read the article

• How do I get my ubuntu server to listen for database connections?

  - by Bob Flemming

  I am having a problems connecting to my database outside of phpmyadmin. Im pretty sure this is because my server isn't listening on port 3306. When I type: sudo netstat -ntlp on my OTHER working server I can see the following line: tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 20445/mysqld However, this line does not appear on the server I am having difficulty with. How do I make my sever listen for mysql connections? Here my my.conf file: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql #skip-networking=off #skip_networking=off #skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 0.0.0.0 # # * Fine Tuning # key_buffer = 64M max_allowed_packet = 64M thread_stack = 650K thread_cache_size = 32 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 2M query_cache_size = 32M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf. # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 32M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

  Read the article

• MySQL 5.5 (Percona) assertion failure log.. what would cause this?

  - by Tom Geee

  256GB, 64 Core , AMD running Ubuntu 12.04 with Percona MySQL 5.5.28. Below is the assertion failure. We just had a second assertion failure (different "in file", position, etc) while running a large set of inserts. After the first failure, MySQL restarted after a reboot only - after continuously looping on the same error after trying to recover. I decided to do a mysqlcheck with -o for optimize. Since these are all Innodb tables (very large tables, 60+GB) this would do an alter table on all tables. In the middle of this , the below assertion failure happened again: 121115 22:30:31 InnoDB: Assertion failure in thread 140086589445888 in file btr0pcur.c line 452 InnoDB: Failing assertion: btr_page_get_prev(next_page, mtr) == buf_block_get_page_no(btr_pcur_get_block(cursor)) InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: about forcing recovery. 03:30:31 UTC - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. Please help us make Percona Server better by reporting any bugs at http://bugs.percona.com/ key_buffer_size=536870912 read_buffer_size=131072 max_used_connections=404 max_threads=500 thread_count=90 connection_count=90 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1618416 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x14edeb710 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7f687366ce80 thread_stack 0x30000 /usr/sbin/mysqld(my_print_stacktrace+0x2e)[0x7b52ee] /usr/sbin/mysqld(handle_fatal_signal+0x484)[0x68f024] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfcb0)[0x7f9cbb23fcb0] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35)[0x7f9cbaea6425] /lib/x86_64-linux-gnu/libc.so.6(abort+0x17b)[0x7f9cbaea9b8b] /usr/sbin/mysqld[0x858463] /usr/sbin/mysqld[0x804513] /usr/sbin/mysqld[0x808432] /usr/sbin/mysqld[0x7db8bf] /usr/sbin/mysqld(_Z13rr_sequentialP11READ_RECORD+0x1d)[0x755aed] /usr/sbin/mysqld(_Z17mysql_alter_tableP3THDPcS1_P24st_ha_create_informationP10TABLE_LISTP10Alter_infojP8st_orderb+0x216b)[0x60399b] /usr/sbin/mysqld(_Z20mysql_recreate_tableP3THDP10TABLE_LIST+0x166)[0x604bd6] /usr/sbin/mysqld[0x647da1] /usr/sbin/mysqld(_ZN24Optimize_table_statement7executeEP3THD+0xde)[0x64891e] /usr/sbin/mysqld(_Z21mysql_execute_commandP3THD+0x1168)[0x59b558] /usr/sbin/mysqld(_Z11mysql_parseP3THDPcjP12Parser_state+0x30c)[0x5a132c] /usr/sbin/mysqld(_Z16dispatch_command19enum_server_commandP3THDPcj+0x1620)[0x5a2a00] /usr/sbin/mysqld(_Z24do_handle_one_connectionP3THD+0x14f)[0x63ce6f] /usr/sbin/mysqld(handle_one_connection+0x51)[0x63cf31] /lib/x86_64-linux-gnu/libpthread.so.0(+0x7e9a)[0x7f9cbb237e9a] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f9cbaf63cbd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f6300004b60): is an invalid pointer Connection ID (thread ID): 876 Status: NOT_KILLED You may download the Percona Server operations manual by visiting http://www.percona.com/software/percona-server/. You may find information in the manual which will help you identify the cause of the crash. 121115 22:31:07 [Note] Plugin 'FEDERATED' is disabled. 121115 22:31:07 InnoDB: The InnoDB memory heap is disabled 121115 22:31:07 InnoDB: Mutexes and rw_locks use GCC atomic builtins .. Then it recovered , without a reboot this time. from the log, what would cause this? I am currently running a dump to see if the problem resurfaces. edit: data partition is all in / since this is a hosted, defaulted file system unfortunately: Filesystem Size Used Avail Use% Mounted on /dev/vda3 742G 445G 260G 64% / udev 121G 4.0K 121G 1% /dev tmpfs 49G 248K 49G 1% /run none 5.0M 0 5.0M 0% /run/lock none 121G 0 121G 0% /run/shm /dev/vda1 99M 54M 40M 58% /boot my.cnf: [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] skip-name-resolve innodb_file_per_table default_storage_engine=InnoDB user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /data/mysql tmpdir = /tmp skip-external-locking key_buffer = 512M max_allowed_packet = 128M thread_stack = 192K thread_cache_size = 64 myisam-recover = BACKUP max_connections = 500 table_cache = 812 table_definition_cache = 812 #query_cache_limit = 4M #query_cache_size = 512M join_buffer_size = 512K innodb_additional_mem_pool_size = 20M innodb_buffer_pool_size = 196G #innodb_file_io_threads = 4 #innodb_thread_concurrency = 12 innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 8M innodb_log_file_size = 1024M innodb_log_files_in_group = 2 innodb_max_dirty_pages_pct = 90 innodb_lock_wait_timeout = 120 log_error = /var/log/mysql/error.log long_query_time = 5 slow_query_log = 1 slow_query_log_file = /var/log/mysql/slowlog.log [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] [isamchk] key_buffer = 16M

  Read the article

• Securing smtp with login

  - by Paul Peelen

  I have a ispconfig server, and it seems that someone is using it to send spam. I got about 130 "Mail Delivery System" email about declined send email. This spammer uses my email address as sent from adress, so I get all these email adresses to my mail. I am using Postfix and Courier. I installed my server according to this guide: http://www.howtoforge.com/perfect-server-debian-lenny-ispconfig3-p3 I did this a few months ago. My question: Can I secure my server to require login to be able to send email, and if so... how? Thanks! EDIT Some data from mail.log, these kind of error show up constantly: Jun 15 17:58:16 bolt postfix/qmgr[10712]: CC7DA1242AE: from=<paul@*****.se>, size=3782, nrcpt=1 (queue active) Jun 15 17:58:16 bolt postfix/smtp[11337]: CC7DA1242AE: to=<[email protected]>, relay=none, delay=4641, delays=4640/0.01/0.32/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=cmlisboa.pt type=MX: Host not found, try again) Jun 15 17:58:19 bolt postfix/smtpd[10836]: connect from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:20 bolt postfix/smtpd[10836]: NOQUEUE: reject: RCPT from static-200-105-220-154.acelerate.net[200.105.220.154]: 550 5.1.1 <advertising@*****.com>: Recipient address rejected: User unknown in virtual mailbox table; from=<[email protected]> to=<advertising@*****.com> proto=ESMTP helo=<static-200-105-220-154.acelerate.net> Jun 15 17:58:20 bolt postfix/smtpd[10836]: lost connection after DATA (0 bytes) from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:20 bolt postfix/smtpd[10836]: disconnect from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:29 bolt postfix/smtpd[10834]: connect from unknown[62.176.172.226] Jun 15 17:58:32 bolt postfix/smtpd[10834]: 386791241F9: client=unknown[62.176.172.226] Jun 15 17:58:34 bolt postfix/cleanup[10975]: 386791241F9: message-id=<[email protected]> Jun 15 17:58:34 bolt postfix/qmgr[10712]: 386791241F9: from=<[email protected]>, size=867, nrcpt=1 (queue active) Jun 15 17:58:35 bolt postfix/smtpd[10834]: disconnect from unknown[62.176.172.226] Jun 15 17:58:35 bolt amavis[11084]: (11084-17) Blocked SPAM, [62.176.172.226] [62.176.172.226] <[email protected]> -> <*****@*****>, Message-ID: <[email protected]>, mail_id: XczovKoMBYNr, Hits: 18.471, size: 867, 833 ms Jun 15 17:58:35 bolt postfix/smtp[10732]: 386791241F9: to=<*****@*****>, relay=127.0.0.1[127.0.0.1]:10024, delay=3.5, delays=2.7/0/0/0.83, dsn=2.7.0, status=sent (250 2.7.0 Ok, discarded, id=11084-17 - SPAM) Jun 15 17:58:35 bolt postfix/qmgr[10712]: 386791241F9: removed Jun 15 17:58:43 bolt postfix/smtpd[10836]: warning: 178.121.154.194: address not listed for hostname mm-194-154-121-178.dynamic.pppoe.mgts.by Jun 15 17:58:43 bolt postfix/smtpd[10836]: connect from unknown[178.121.154.194] Jun 15 17:58:45 bolt postfix/smtpd[10727]: connect from unknown[180.134.223.86] EDIT #2 Got some more info from the logs, this is a send request: mail.info.1:Jun 15 16:41:57 bolt amavis[5399]: (05399-06) Passed CLEAN, [110.139.48.64] [110.139.48.64] <paul@*****.se> -> <[email protected]>, Message-ID: <CHILKAT-MID-7c54ebcf-5501-de9b-f0b1-4f0234290d8d@HP-IRISH>, mail_id: 35l56Ramx6Nc, Hits: -2.941, size: 3329, queued_as: 2485770086, 136 ms mail.info.1:Jun 15 16:41:57 bolt postfix/smtp[4743]: 375C570082: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=4.8, delays=4.7/0/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=05399-06, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 2485770086) Which apparently got thrue. Any ideas how to restrict this?

  Read the article

• Unable to connect to OpenVPN server

  - by Incognito

  I'm trying to get a working setup of OpenVPN on my VM and authenticate into it from a client. I'm not sure but it looks to me like it's socket related, as it's not set to LISTEN, and localhost seems wrong. I've never set up VPN before. # netstat -tulpn | grep vpn Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 127.0.0.1:1194 0.0.0.0:* 24059/openvpn I don't think this is set up correctly. Here's some detail into what I've done. I have a VPS from MediaTemple: These are my interfaces before starting openvpn: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:39482 errors:0 dropped:0 overruns:0 frame:0 TX packets:39482 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3237452 (3.2 MB) TX bytes:3237452 (3.2 MB) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:4885284 errors:0 dropped:0 overruns:0 frame:0 TX packets:4679884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:835278537 (835.2 MB) TX bytes:1989289617 (1.9 GB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:205.[redacted] P-t-P:205.186.148.82 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 I've followed this guide on setting up a basic server and getting a .p12 file, however, I was receiving an error that stated /dev/net/tun was missing, so I created it mkdir -p /dev/net mknod /dev/net/tun c 10 200 chmod 600 /dev/net/tun This resolved the error preventing the service from launching, however, I am unable to connect. On the server I've set up the myserver.conf file (as per the tutorial) to indicate local 127.0.0.1 (I've also attempted with the public IP address, perhaps I don't understand what they mean by local IP?). The server launches without error, this is what the log looks like when it starts: Sun Apr 1 17:21:27 2012 OpenVPN 2.1.3 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Mar 11 2011 Sun Apr 1 17:21:27 2012 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Sun Apr 1 17:21:27 2012 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Sun Apr 1 17:21:27 2012 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Sun Apr 1 17:21:27 2012 TUN/TAP device tun0 opened Sun Apr 1 17:21:27 2012 /sbin/ifconfig tun0 10.8.0.1 pointopoint 10.8.0.2 mtu 1500 Sun Apr 1 17:21:27 2012 GID set to openvpn Sun Apr 1 17:21:27 2012 UID set to openvpn Sun Apr 1 17:21:27 2012 UDPv4 link local (bound): [AF_INET]127.0.0.1:1194 Sun Apr 1 17:21:27 2012 UDPv4 link remote: [undef] Sun Apr 1 17:21:27 2012 Initialization Sequence Completed This creates a tun0 interface that looks like this: tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) And the netstat command still indicates the state is not set to LISTEN. On the client-side I've installed the p12 certs onto two devices (one is an android tablet, the other is an Ubuntu desktop). I don't see port 1194 as open either. Both clients install the cert files and then ask me for the L2TP secret (which was set on the file), but then they oddly ask me for a username and a password, which I don't know where I could possibly get those from. I attempted all of my logins, and some whacky guesses that were frantically pulling at straws. If there's any more information I could provide let me know.

  Read the article

< Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >