legal issues - Page 372

Integrating external computer into a domain - some recommendations please

- by TomTom

Given: * A multi loation company. Every office has local routers that connect to a central VPN capable rouer in a data center. All fine so far. We now need to move a computer off site into a hosting center across the globe, to get it closer to some supplier computers we work for. it will run limited logic but latency is important, and our latency so far is too large. This computer will be in a data center and does no require incoming connections except for adminsitrative purposes, although it needs outgoing connetions. I have no real chance to put one of my VPN routers there, sadly - otherwise I would have no problem. Usage of RRAs is not recommended (we had various probblems there over time). I could deal with it. The computer MUSt integrate into the corporate structure via VPN and join the domain and be fully "tracked" (controlled for performance). What is the best suggestion? So far it looks like my best bets woudl be to log in via RRAS and deal with whatever issues arise there plus uise the local firewall the limit incoming connections to this computer to what is needed (which runs down to an emergency RDP connection allowance). Anyone a better idea?

Read the article

Is it possible to automate a driver change on Windows for a plug&play peripheral ?

- by Gnoupi

Is it possible to automate a change of driver for a same peripheral, under Windows ? Typically to switch between two ones. (I'm talking about the kind of driver which doesn't require the computer to reboot, typically). I have a peripheral for which I use the constructor's driver in some cases, but also a modified driver in other cases. Not that the changing driver is really annoying, but I would like to know if it would be possible to make it easier, like for example in a shortcut. I know the name of the driver, even which files involved. For more details, the concerned peripheral is a "Xbox360 Gamepad for Windows" (or something like this). The base driver is good for new games, but it doesn't handle correctly older ones (some issues with axes, and vibrations). The modified driver makes it behave like a classic controller, but then it doesn't work correctly on new games (typically using the new version of dxinput linked to the "Games for Windows"). However, this is not a question specific to this gamepad, I'm asking in general about automating this change of drivers. I currently use Windows XP, so my question is mostly about it, but I'm also interested in the same issue for later versions (Windows 7, most likely). I'm not really sure if this is even possible, but in case someone has an idea, I'm asking.

Read the article

Is there any any merit to routinely restore a linux system, even if unnecessary?

- by field_guy

I do fieldwork with a number of computers running ubuntu performing critical tasks doing fieldwork. The computers are similarly configured with slight variations. Since we've had some configuration issues in the past, my boss is pressing for us to take an image of the installation on each computer, and restore each computer to that image before they are to go into the field. My preferred solution would be to write a common script that checks to ensure that the configuration of the system is correct and that the system is operational. If the computer has been verified, isn't restoring it to that configuration redundant? And are there any inherent problems with doing so? My reluctance stems from the fact that our software and configuration is subject to change in the field, but these changes must be made across all the computers. That means that when a change is made, all the restoration images have to be updated as well. The differences in the configuration of each of the computers live in /etc. In the event that restoration is required, I would prefer to keep a single image containing everything that is common to all machines, and have a snapshot of each computer's /etc directory to be used for restoring the state of that particular machine. What's the better approach?

Read the article

Slow network interaction between 2 kvm host machines

- by VirtualNoob

We have 2 physical machines, Host1 is a CentOS 6.4 kvm host and hosts ~7 kvm VMs all running Ubuntu 12.04 - all of this runs perfectly. Recently we've added a 2nd host system, host2, again a CentOS 6.4 kvm host with a view to running another couple of VMs and providing some failover against host1 should it be required. Both physical machines reside in the same cabinet in our DC, and are on the same subnet - let's say host1: 1.1.1.64 and host2: 1.1.1.81. Both have their gateway set to the DC gateway of 1.1.1.254 with no hardware firewall in between. On each machine, I have 4 NICs that are bonded together to form a single interface, which is then bridged to allow the VMs to access the network. All of the VMs are online, and all of them can successfully ssh into the hosts without any delay. Both systems can access the internet fine, and I can ssh into both systems from home without any issues. However, there is a real delay when attempting to ssh from host1 to host2 (or vice versa) and this obviously means that any action required on host2, that is controlled by host1 either takes forever or results in failure due to timeout. In the interest of keeping this post short, I've put my ifcfg files into a pastie: http://pastie.org/8081648 I've tried both adding a firewall rule in each machine for the other, and also disabling the firewall entirely, so that can't be the issue. I've tried troubleshooting this myself but can't seem to get to the bottom of it. Any help or advice would be appreciated. Thanks in advance.

Read the article

What could be causing windows to fail to sleep or hibernate, and revert system settings?

- by xdumaine

I am running Windows 8.1 on my system (Dell e6520) and the symptoms are this: My PC won't sleep or hibernate. It the screen turns off, but the fans just run and run, and after a little while, it completely shuts down, and when I start it back up, everything is closed, like it was a fresh boot/restart. I'm have a weird issue with outlook described here and the fix works fine - modifying a registry value. The weirder part is that after my computer fails to sleep or hibernate, and it starts back up, the registry value is GONE, like I never modified it, and thus the outlook error message is back. I thought maybe a graphics driver was preventing the sleep/hibernate, so I attempted to uninstall the NVIDIA graphics driver and control panel. HOWEVER, once the computer fails to sleep/hibernate, the NVIDIA graphics driver and control panel appear BACK on my system, like I didn't uninstall them. What could be happening here? I really need to be able to sleep/hibernate so I don't lose work or my work state, and these issues are really concerning. What I've tried, without success: Uninstalling graphics driver mentioned above Disabling hibernate and using sleep disabling/re-enabling hibernate Disabling startup items Sleeping as local system admin account disconnecting all USB, network, and bluetooth devices

Read the article

VMWare server: virtual machine start-up reaches 95% and hangs

- by Magsol

This problem cropped up today, after updating my eVGA motherboard's chipset in order to try and fix an unrelated issue. After installing the chipset update (contained SATA and Ethernet drivers), every time I've tried to start my Ubuntu VM, it reaches 95% in the web interface and then just hangs. I'm using VMWare Server 2.0.2, running it within Windows 7 64-bit. I haven't had any issues up until now, and I suspect it has something to do with the chipset update. I've already tried reinstalling VMWare itself, removing the VM from the inventory and re-adding it, and neither has proved successful. I'm also not sure how to kill the VMware server process itself once the start-up hangs; I've only been able to try again by rebooting (as none of the VMWare Services listed kill the server process itself). Any insights? Edit: Uhhh...as an addendum: I have a cron job set up on my Ubuntu VM that runs every 20 minutes. The VM is still listed in the VMWare web interface as at 95% of startup, and the start/stop buttons are still disabled, but the cronjob just ran. I also tested SSH, and I was able to tunnel into the Ubuntu VM as well. Now I'm really confused. Edit #2: I just started a thread on the VMWare Server support forums on this same topic. Hopefully between the two communities, we can come up with an answer: http://communities.vmware.com/thread/251033 Edit #3: In lieu of a specific fix, I've switched over to VirtualBox, and all is working just fine.

Read the article

Silverlight 4 + WCF RIA - Data Service Design Best Practices

- by Chadd Nervig

Hey all. I realize this is a rather long question, but I'd really appreciate any help from anyone experienced with RIA services. Thanks! I'm working on a Silverlight 4 app that views data from the server. I'm relatively inexperienced with RIA Services, so have been working through the tasks of getting the data I need down to the client, but every new piece I add to the puzzle seems to be more and more problematic. I feel like I'm missing some basic concepts here, and it seems like I'm just 'hacking' pieces on, in time-consuming ways, each one breaking the previous ones as I try to add them. I'd love to get the feedback of developers experienced with RIA services, to figure out the intended way to do what I'm trying to do. Let me lay out what I'm trying to do: First, the data. The source of this data is a variety of sources, primarily created by a shared library which reads data from our database, and exposes it as POCOs (Plain Old CLR Objects). I'm creating my own POCOs to represent the different types of data I need to pass between server and client. DataA - This app is for viewing a certain type of data, lets call DataA, in near-realtime. Every 3 minutes, the client should pull data down from the server, of all the new DataA since the last time it requested data. DataB - Users can view the DataA objects in the app, and may select one of them from the list, which displays additional details about that DataA. I'm bringing these extra details down from the server as DataB. DataC - One of the things that DataB contains is a history of a couple important values over time. I'm calling each data point of this history a DataC object, and each DataB object contains many DataCs. The Data Model - On the server side, I have a single DomainService: [EnableClientAccess] public class MyDomainService : DomainService { public IEnumerable<DataA> GetDataA(DateTime? startDate) { /*Pieces together the DataAs that have been created since startDate, and returns them*/ } public DataB GetDataB(int dataAID) { /*Looks up the extended info for that dataAID, constructs a new DataB with that DataA's data, plus the extended info (with multiple DataCs in a List<DataC> property on the DataB), and returns it*/ } //Not exactly sure why these are here, but I think it //wouldn't compile without them for some reason? The data //is entirely read-only, so I don't need to update. public void UpdateDataA(DataA dataA) { throw new NotSupportedException(); } public void UpdateDataB(DataB dataB) { throw new NotSupportedException(); } } The classes for DataA/B/C look like this: [KnownType(typeof(DataB))] public partial class DataA { [Key] [DataMember] public int DataAID { get; set; } [DataMember] public decimal MyDecimalA { get; set; } [DataMember] public string MyStringA { get; set; } [DataMember] public DataTime MyDateTimeA { get; set; } } public partial class DataB : DataA { [Key] [DataMember] public int DataAID { get; set; } [DataMember] public decimal MyDecimalB { get; set; } [DataMember] public string MyStringB { get; set; } [Include] //I don't know which of these, if any, I need? [Composition] [Association("DataAToC","DataAID","DataAID")] public List<DataC> DataCs { get; set; } } public partial class DataC { [Key] [DataMember] public int DataAID { get; set; } [Key] [DataMember] public DateTime Timestamp { get; set; } [DataMember] public decimal MyHistoricDecimal { get; set; } } I guess a big question I have here is... Should I be using Entities instead of POCOs? Are my classes constructed correctly to be able to pass the data down correctly? Should I be using Invoke methods instead of Query (Get) methods on the DomainService? On the client side, I'm having a number of issues. Surprisingly, one of my biggest ones has been threading. I didn't expect there to be so many threading issues with MyDomainContext. What I've learned is that you only seem to be able to create MyDomainContextObjects on the UI thread, all of the queries you can make are done asynchronously only, and that if you try to fake doing it synchronously by blocking the calling thread until the LoadOperation finishes, you have to do so on a background thread, since it uses the UI thread to make the query. So here's what I've got so far. The app should display a stream of the DataA objects, spreading each 3min chunk of them over the next 3min (so they end up displayed 3min after the occurred, looking like a continuous stream, but only have to be downloaded in 3min bursts). To do this, the main form initializes, creates a private MyDomainContext, and starts up a background worker, which continuously loops in a while(true). On each loop, it checks if it has any DataAs left over to display. If so, it displays that Data, and Thread.Sleep()s until the next DataA is scheduled to be displayed. If it's out of data, it queries for more, using the following methods: public DataA[] GetDataAs(DateTime? startDate) { _loadOperationGetDataACompletion = new AutoResetEvent(false); LoadOperation<DataA> loadOperationGetDataA = null; loadOperationGetDataA = _context.Load(_context.GetDataAQuery(startDate), System.ServiceModel.DomainServices.Client.LoadBehavior.RefreshCurrent, false); loadOperationGetDataA.Completed += new EventHandler(loadOperationGetDataA_Completed); _loadOperationGetDataACompletion.WaitOne(); List<DataA> dataAs = new List<DataA>(); foreach (var dataA in loadOperationGetDataA.Entities) dataAs.Add(dataA); return dataAs.ToArray(); } private static AutoResetEvent _loadOperationGetDataACompletion; private static void loadOperationGetDataA_Completed(object sender, EventArgs e) { _loadOperationGetDataACompletion.Set(); } Seems kind of clunky trying to force it into being synchronous, but since this already is on a background thread, I think this is OK? So far, everything actually works, as much of a hack as it seems like it may be. It's important to note that if I try to run that code on the UI thread, it locks, because it waits on the WaitOne() forever, locking the thread, so it can't make the Load request to the server. So once the data is displayed, users can click on one as it goes by to fill a details pane with the full DataB data about that object. To do that, I have the the details pane user control subscribing to a selection event I have setup, which gets fired when the selection changes (on the UI thread). I use a similar technique there, to get the DataB object: void SelectionService_SelectedDataAChanged(object sender, EventArgs e) { DataA dataA = /*Get the selected DataA*/; MyDomainContext context = new MyDomainContext(); var loadOperationGetDataB = context.Load(context.GetDataBQuery(dataA.DataAID), System.ServiceModel.DomainServices.Client.LoadBehavior.RefreshCurrent, false); loadOperationGetDataB.Completed += new EventHandler(loadOperationGetDataB_Completed); } private void loadOperationGetDataB_Completed(object sender, EventArgs e) { this.DataContext = ((LoadOperation<DataB>)sender).Entities.SingleOrDefault(); } Again, it seems kinda hacky, but it works... except on the DataB that it loads, the DataCs list is empty. I've tried all kinds of things there, and I don't see what I'm doing wrong to allow the DataCs to come down with the DataB. I'm about ready to make a 3rd query for the DataCs, but that's screaming even more hackiness to me. It really feels like I'm fighting against the grain here, like I'm doing this in an entirely unintended way. If anyone could offer any assistance, and point out what I'm doing wrong here, I'd very much appreciate it! Thanks!

Read the article

Connecting to SQL Server in Php - Extension Err

- by John Doe

<html> <head> <title>Connecting </title> </head> <body> <?php $host = "*.*.*.*"; $username = "xxx"; $password = "xxx"; $db_name = "xxx"; $db = mssql_connect($host, $username,$password) or die("Couldnt Connect"); $selected = mssql_select_db($db_name, $db) or die("Couldnt open database"); ?> </body> </html> My error message is: Fatal error: Call to undefined function mssql_connect() in C:\wamp\www\php\dbase.php on line 12 I am using WampServer 2.0 on Php 5.3.0 When I check the extensions, php_mssql is Checked. I also checked the php.ini file to make sure it is not commented out. I have my file dbase.php saved in C:\wamp\www\php. I have tried stopping the service, closing everything, and running it again. I know the problem is that the extension file is not being included somehow. The below is copied from my php.ini file. Note I made all http = /http to avoid posting Links. ;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;; ; UNIX: "/path1:/path2" ;include_path = ".:/php/includes" ; Windows: "\path1;\path2" include_path = "C:\wamp\bin\php\php5.3.0\ext" ; ; PHP's default setting for include_path is ".;/path/to/php/pear" ; /http://php.net/include-path ; The root of the PHP pages, used only if nonempty. ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root ; if you are running php as a CGI under any web server (other than IIS) ; see documentation for security issues. The alternate is to use the ; cgi.force_redirect configuration below ; /http://php.net/doc-root doc_root = ; The directory under which PHP opens the script using /~username used only ; if nonempty. ; /http://php.net/user-dir user_dir = ; Directory in which the loadable extensions (modules) reside. ; /http://php.net/extension-dir ; extension_dir = "./" ; On windows: ; extension_dir = "ext" extension_dir = "c:/wamp/bin/php/php5.3.0/ext/" ; Whether or not to enable the dl() function. The dl() function does NOT work ; properly in multithreaded servers, such as IIS or Zeus, and is automatically ; disabled on them. ; /http://php.net/enable-dl enable_dl = Off ; cgi.force_redirect is necessary to provide security running PHP as a CGI under ; most web servers. Left undefined, PHP turns this on by default. You can ; turn it off here AT YOUR OWN RISK ; You CAN safely turn this off for IIS, in fact, you MUST. ; /http://php.net/cgi.force-redirect ;cgi.force_redirect = 1 ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with ; every request. PHP's default behavior is to disable this feature. ;cgi.nph = 1 ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP ; will look for to know it is OK to continue execution. Setting this variable MAY ; cause security issues, KNOW WHAT YOU ARE DOING FIRST. ; /http://php.net/cgi.redirect-status-env ;cgi.redirect_status_env = ; ; cgi.fix_pathinfo provides real PATH_INFO/PATH_TRANSLATED support for CGI. PHP's ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. ; /http://php.net/cgi.fix-pathinfo ;cgi.fix_pathinfo=1 ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate ; security tokens of the calling client. This allows IIS to define the ; security context that the request runs under. mod_fastcgi under Apache ; does not currently support this feature (03/17/2002) ; Set to 1 if running under IIS. Default is zero. ; /http://php.net/fastcgi.impersonate ;fastcgi.impersonate = 1; ; Disable logging through FastCGI connection. PHP's default behavior is to enable ; this feature. ;fastcgi.logging = 0 ; cgi.rfc2616_headers configuration option tells PHP what type of headers to ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that ; is supported by Apache. When this option is set to 1 PHP will send ; RFC2616 compliant header. ; Default is zero. ; /http://php.net/cgi.rfc2616-headers ;cgi.rfc2616_headers = 0 ;;;;;;;;;;;;;;;; ; File Uploads ; ;;;;;;;;;;;;;;;; ; Whether to allow HTTP file uploads. ; /http://php.net/file-uploads file_uploads = On ; Temporary directory for HTTP uploaded files (will use system default if not ; specified). ; /http://php.net/upload-tmp-dir upload_tmp_dir = "c:/wamp/tmp" ; Maximum allowed size for uploaded files. ; /http://php.net/upload-max-filesize upload_max_filesize = 2M Also, my php.ini file is saved in: C:\wamp\bin\apache\Apache2.2.11\bin

Read the article

jQuery DataTables is messing op my CSS grids in IE8, how to fix?

- by Brendan Vogt

I am using ASP.NET MVC3 with the jQuery Datatable plug in. I am having an issues with my CSS layout when the datatable is on a page. If there is no datatable then everything displays fine. When the datatable is on the screen then it overlaps the footer of my website. I can't seem to get this to display correctly. I have a grid layout using the YUI3, and this is what I all use from YUI3 (in this order): cssreset-min cssfonts-min cssgrids-min cssbase-min This works fine in the latest version of FireFox. I am only testing on IE8, this is a requirement and most of the people at my work uses IE8. I have minified my HTML so that only the bare minimum is available. This is my HTML: <!DOCTYPE html> <html> <head> <title>My Website</title> <meta charset="utf-8" /> <meta http-equiv="X-UA-Compatible" content="IE=Edge" /> <link href="/Assets/Stylesheets/hef2.css" rel="stylesheet" /> <link href="/Assets/Stylesheets/jQuery-DataTables/css/jquery.dataTables.css" rel="stylesheet" /> </head> <body> <div id="hd">Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas sit amet metus. Nunc quam elit, posuere nec, auctor in, rhoncus quis, dui. Aliquam erat volutpat. Ut dignissim, massa sit amet dignissim cursus, quam lacus feugiat.</div> <div id="bd"> <div class="yui3-g"> <div class="yui3-u" id="nav"> <div id="nav-container"> <div class="content"> <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas sit amet metus. Nunc quam elit, posuere nec, auctor in, rhoncus quis, dui. Aliquam erat volutpat. Ut dignissim, massa sit amet dignissim cursus, quam lacus feugiat.</p> </div> <div class="content"> <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas sit amet metus. Nunc quam elit, posuere nec, auctor in, rhoncus quis, dui. Aliquam erat volutpat. Ut dignissim, massa sit amet dignissim cursus, quam lacus feugiat.</p> </div> <div class="content"> <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas sit amet metus. Nunc quam elit, posuere nec, auctor in, rhoncus quis, dui. Aliquam erat volutpat. Ut dignissim, massa sit amet dignissim cursus, quam lacus feugiat.</p> </div> <div class="content"> <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas sit amet metus. Nunc quam elit, posuere nec, auctor in, rhoncus quis, dui. Aliquam erat volutpat. Ut dignissim, massa sit amet dignissim cursus, quam lacus feugiat.</p> </div> </div> </div> <div class="yui3-u" id="main"> <div id="main-container"> <div class="content"> <h1>Banks Dashboard</h1> <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas sit amet metus. Nunc quam elit, posuere nec, auctor in, rhoncus quis, dui. Aliquam erat volutpat. Ut dignissim, massa sit amet dignissim cursus, quam lacus feugiat.</p> </div> <div class="content"> <div id="banks-datatable-wrapper"> <div id="banks-datatable-container"></div> <div style="clear:both;"></div> </div> </div> <div class="content"> <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas sit amet metus. Nunc quam elit, posuere nec, auctor in, rhoncus quis, dui. Aliquam erat volutpat. Ut dignissim, massa sit amet dignissim cursus, quam lacus feugiat.</p> </div> <div class="content"> <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas sit amet metus. Nunc quam elit, posuere nec, auctor in, rhoncus quis, dui. Aliquam erat volutpat. Ut dignissim, massa sit amet dignissim cursus, quam lacus feugiat.</p> </div> <div class="content"> <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas sit amet metus. Nunc quam elit, posuere nec, auctor in, rhoncus quis, dui. Aliquam erat volutpat. Ut dignissim, massa sit amet dignissim cursus, quam lacus feugiat.</p> </div> </div> </div> </div> </div> <div id="ft">Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas sit amet metus. Nunc quam elit, posuere nec, auctor in, rhoncus quis, dui. Aliquam erat volutpat. Ut dignissim, massa sit amet dignissim cursus, quam lacus feugiat.</div> <script src="/Assets/JavaScripts/jQuery/jquery-1.7.2.min.js"></script> <script src="/Assets/JavaScripts/jQuery-DataTables/jquery.dataTables.min.js"></script> <script type="text/javascript"> $(document).ready(function () { $('#banks-datatable-container').html('<table class="display" id="banks-datatable"></table>'); $('#banks-datatable').dataTable({ "aoColumns": [ { "sTitle": "Engine" }, { "sTitle": "Browser" }, { "sTitle": "Platform" }, { "sTitle": "Version", "sClass": "center" }, { "sTitle": "Grade" } ], "bAutoWidth": false, "bFilter": false, "bLengthChange": false, "bProcessing": true, //"bServerSide": true, "bSort": false, "iDisplayLength": 11, "sAjaxSource": '/Administration/Bank/List2' }); }); </script> </body> </html> This is the only CSS that I currently use together with the CSS of YUI3: body { margin: auto; width: 1025px; } #nav { width: 300px; } #main { width: 725px; } Can someone please help me get this sorted out? I have tried tried adding clear:both but it didn't work. Is the an online service like jsbin where I can paste/upload my HTML/CSS code/files? Code can viewed at: http://live.datatables.net/efosuj/3/edit. It displays correctly in the available viewer but when run separate in IE8 then it gives issues. UPDATE 2012-06-12 I managed to add the following and it works, but I would like to add it in a style, tried it but it didn't work: if (navigator.userAgent.toString().indexOf('MSIE') >= 0) { jQuery('#main-container').css('overflow', 'auto'); } This was added after the grid was loaded. Is this the only way to do this?

Read the article

Connecting to mssql in Php - Extension Err

- by John Doe

<html> <head> <title>Connecting </title> </head> <body> <?php $host = "*.*.*.*"; $username = "xxx"; $password = "xxx"; $db_name = "xxx"; $db = mssql_connect($host, $username,$password) or die("Couldnt Connect"); $selected = mssql_select_db($db_name, $db) or die("Couldnt open database"); ?> </body> </html> My error message is: Fatal error: Call to undefined function mssql_connect() in C:\wamp\www\php\dbase.php on line 12 I am using WampServer 2.0 on Php 5.3.0 When I check the extensions, php_mssql is Checked. I also checked the php.ini file to make sure it is not commented out. I have my file dbase.php saved in C:\wamp\www\php. I have tried stopping the service, closing everything, and running it again. I know the problem is that the extension file is not being included somehow. The below is copied from my php.ini file. Note I made all http = /http to avoid posting Links. ;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;; ; UNIX: "/path1:/path2" ;include_path = ".:/php/includes" ; Windows: "\path1;\path2" include_path = "C:\wamp\bin\php\php5.3.0\ext" ; ; PHP's default setting for include_path is ".;/path/to/php/pear" ; /http://php.net/include-path ; The root of the PHP pages, used only if nonempty. ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root ; if you are running php as a CGI under any web server (other than IIS) ; see documentation for security issues. The alternate is to use the ; cgi.force_redirect configuration below ; /http://php.net/doc-root doc_root = ; The directory under which PHP opens the script using /~username used only ; if nonempty. ; /http://php.net/user-dir user_dir = ; Directory in which the loadable extensions (modules) reside. ; /http://php.net/extension-dir ; extension_dir = "./" ; On windows: ; extension_dir = "ext" extension_dir = "c:/wamp/bin/php/php5.3.0/ext/" ; Whether or not to enable the dl() function. The dl() function does NOT work ; properly in multithreaded servers, such as IIS or Zeus, and is automatically ; disabled on them. ; /http://php.net/enable-dl enable_dl = Off ; cgi.force_redirect is necessary to provide security running PHP as a CGI under ; most web servers. Left undefined, PHP turns this on by default. You can ; turn it off here AT YOUR OWN RISK ; You CAN safely turn this off for IIS, in fact, you MUST. ; /http://php.net/cgi.force-redirect ;cgi.force_redirect = 1 ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with ; every request. PHP's default behavior is to disable this feature. ;cgi.nph = 1 ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP ; will look for to know it is OK to continue execution. Setting this variable MAY ; cause security issues, KNOW WHAT YOU ARE DOING FIRST. ; /http://php.net/cgi.redirect-status-env ;cgi.redirect_status_env = ; ; cgi.fix_pathinfo provides real PATH_INFO/PATH_TRANSLATED support for CGI. PHP's ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. ; /http://php.net/cgi.fix-pathinfo ;cgi.fix_pathinfo=1 ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate ; security tokens of the calling client. This allows IIS to define the ; security context that the request runs under. mod_fastcgi under Apache ; does not currently support this feature (03/17/2002) ; Set to 1 if running under IIS. Default is zero. ; /http://php.net/fastcgi.impersonate ;fastcgi.impersonate = 1; ; Disable logging through FastCGI connection. PHP's default behavior is to enable ; this feature. ;fastcgi.logging = 0 ; cgi.rfc2616_headers configuration option tells PHP what type of headers to ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that ; is supported by Apache. When this option is set to 1 PHP will send ; RFC2616 compliant header. ; Default is zero. ; /http://php.net/cgi.rfc2616-headers ;cgi.rfc2616_headers = 0 ;;;;;;;;;;;;;;;; ; File Uploads ; ;;;;;;;;;;;;;;;; ; Whether to allow HTTP file uploads. ; /http://php.net/file-uploads file_uploads = On ; Temporary directory for HTTP uploaded files (will use system default if not ; specified). ; /http://php.net/upload-tmp-dir upload_tmp_dir = "c:/wamp/tmp" ; Maximum allowed size for uploaded files. ; /http://php.net/upload-max-filesize upload_max_filesize = 2M Also, my php.ini file is saved in: C:\wamp\bin\apache\Apache2.2.11\bin

Read the article

WCF timeout exception detailed investigation

- by Jason Kealey

We have an application that has a WCF service (*.svc) running on IIS7 and various clients querying the service. The server is running Win 2008 Server. The clients are running either Windows 2008 Server or Windows 2003 server. I am getting the following exception, which I have seen can in fact be related to a large number of potential WCF issues. System.TimeoutException: The request channel timed out while waiting for a reply after 00:00:59.9320000. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://www.domain.com/WebServices/myservice.svc/gzip' has exceeded the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout. I have increased the timeout to 30min and the error still occurred. This tells me that something else is at play, because the quantity of data could never take 30min to upload or download. The error comes and goes. At the moment, it is more frequent. It does not seem to matter if I have 3 clients running simultaneously or 100, it still occurs once in a while. Most of the time, there are no timeouts but I still get a few per hour. The error comes from any of the methods that are invoked. One of these methods does not have parameters and returns a bit of data. Another takes in lots of data as a parameter but executes asynchronously. The errors always originate from the client and never reference any code on the server in the stack trace. It always ends with: at System.Net.HttpWebRequest.GetResponse() at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout) On the server: I've tried (and currently have) the following binding settings: maxBufferSize="2147483647" maxReceivedMessageSize="2147483647" maxBufferPoolSize="2147483647" It does not seem to have an impact. I've tried (and currently have) the following throttling settings: <serviceThrottling maxConcurrentCalls="1500" maxConcurrentInstances="1500" maxConcurrentSessions="1500"/> It does not seem to have an impact. I currently have the following settings for the WCF service. [ServiceBehavior(InstanceContextMode = InstanceContextMode.Single, ConcurrencyMode = ConcurrencyMode.Single)] I ran with ConcurrencyMode.Multiple for a while, and the error still occurred. I've tried restarting IIS, restarting my underlying SQL Server, restarting the machine. All of these don't seem to have an impact. I've tried disabling the Windows firewall. It does not seem to have an impact. On the client, I have these settings: maxReceivedMessageSize="2147483647" <system.net> <connectionManagement> <add address="*" maxconnection="16"/> </connectionManagement> </system.net> My client closes its connections: var client = new MyClient(); try { return client.GetConfigurationOptions(); } finally { client.Close(); } I have changed the registry settings to allow more outgoing connections: MaxConnectionsPerServer=24, MaxConnectionsPer1_0Server=32. I have now just recently tried SvcTraceViewer.exe. I managed to catch one exception on the client end. I see that its duration is 1 minute. Looking at the server side trace, I can see that the server is not aware of this exception. The maximum duration I can see is 10 seconds. I have looked at active database connections using exec sp_who on the server. I only have a few (2-3). I have looked at TCP connections from one client using TCPview. It usually is around 2-3 and I have seen up to 5 or 6. Simply put, I am stumped. I have tried everything I could find, and must be missing something very simple that a WCF expert would be able to see. It is my gut feeling that something is blocking my clients at the low-level (TCP), before the server actually receives the message and/or that something is queuing the messages at the server level and never letting them process. If you have any performance counters I should look at, please let me know. (please indicate what values are bad, as some of these counters are hard to decypher). Also, how could I log the WCF message size? Finally, are there any tools our there that would allow me to test how many connections I can establish between my client and server (independently from my application) Thanks for your time! Extra information added June 20th: My WCF application does something similar to the following. while (true) { Step1GetConfigurationSettingsFromServerViaWCF(); // can change between calls Step2GetWorkUnitFromServerViaWCF(); DoWorkLocally(); // takes 5-15minutes. Step3SendBackResultsToServerViaWCF(); } Using WireShark, I did see that when the error occurs, I have a five TCP retransmissions followed by a TCP reset later on. My guess is the RST is coming from WCF killing the connection. The exception report I get is from Step3 timing out. I discovered this by looking at the tcp stream "tcp.stream eq 192". I then expanded my filter to "tcp.stream eq 192 and http and http.request.method eq POST" and saw 6 POSTs during this stream. This seemed odd, so I checked with another stream such as tcp.stream eq 100. I had three POSTs, which seems a bit more normal because I am doing three calls. However, I do close my connection after every WCF call, so I would have expected one call per stream (but I don't know much about TCP). Investigating a bit more, I dumped the http packet load to disk to look at what these six calls where. 1) Step3 2) Step1 3) Step2 4) Step3 - corrupted 5) Step1 6) Step2 My guess is two concurrent clients are using the same connection, that is why I saw duplicates. However, I still have a few more issues that I can't comprehend: a) Why is the packet corrupted? Random network fluke - maybe? The load is gzipped using this sample code: http://msdn.microsoft.com/en-us/library/ms751458.aspx - Could the code be buggy once in a while when used concurrently? I should test without the gzip library. b) Why would I see step 1 & step 2 running AFTER the corrupted operation timed out? It seems to me as if these operations should not have occurred. Maybe I am not looking at the right stream because my understanding of TCP is flawed. I have other streams that occur at the same time. I should investigate other streams - a quick glance at streams 190-194 show that the Step3 POST have proper payload data (not corrupted). Pushing me to look at the gzip library again.

Read the article

AS3 XML Slideshow Woes

- by Chris

Hello All, I am hoping someone out there can possibly shed some light on a couple issues I am having with an image slideshow I have been working on a simple slideshow for a project and everything was going great/as expected up until I created a function to hide the previous images before displaying the next. On the first pass through everything seems to run fine; once the slideshow starts over, the images don't show up, yet when it goes to load the following image, it plays the tween from the hide previous function which shows the image briefly before fading out. So essentially the display is blank, then the timer calls in the next slide and its a brief flash of an image fading out, and then blank again. Another issue I am having is the text that I am loading in from the XML does not seem to want to tween in or out as they are supposed to. Here is the code: import fl.transitions.Tween; import fl.transitions.easing.*; import fl.transitions.TweenEvent; import flash.display.BitmapData; import flash.display.Bitmap; import flash.display.Sprite; import flash.utils.Timer; import flash.events.TimerEvent; var filePath:String = "photo1.xml"; var iArray:Array = new Array(); var titleArray:Array = new Array(); var dateArray:Array = new Array(); var catArray:Array = new Array(); var descArray:Array = new Array(); var rotationSpeed:Number; var totalImages:Number; var dataList:XMLList; var imagesLoaded:Number = 0; var currImage:Number = 0; var rotationTimer:Timer; var oldTween:Tween; var imageContainer:Sprite = new Sprite(); var imageHolder:Sprite = new Sprite(); var titleContainer:Sprite = new Sprite(); var dateContainer:Sprite = new Sprite(); var catContainer:Sprite = new Sprite(); var descContainer:Sprite = new Sprite(); var theMask:Sprite = new Sprite(); theMask.graphics.beginFill(0x000000); theMask.graphics.drawRect(114, 25, 323, 332); addChild(theMask); var loader:URLLoader = new URLLoader(); loader.addEventListener(Event.COMPLETE, onComplete); loader.load(new URLRequest(filePath)); function onComplete (evt:Event):void{ var pigData:XML = new XML(evt.target.data); pigData.ignoreWhitespace; dataList = pigData.pic; totalImages = dataList.length(); rotationSpeed = pigData.@speed * 1000; stage.scaleMode = StageScaleMode.NO_SCALE; loadImages(); rotationTimer = new Timer(rotationSpeed); rotationTimer.addEventListener(TimerEvent.TIMER, rotateImage); rotationTimer.start(); } function loadImages() { for (var i:Number = 0; i < totalImages; i++) { var imageURL:String = dataList[i].big; var imageLoader:Loader = new Loader(); imageLoader.load(new URLRequest(imageURL)); imageLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoaded); iArray.push(imageLoader); var titleField:TextField = new TextField(); var dateField:TextField = new TextField(); var catField:TextField = new TextField(); var descField:TextField = new TextField(); titleField.text = dataList[i].title; titleField.autoSize = TextFieldAutoSize.LEFT; titleArray.push(titleField); dateField.text = dataList[i].date; dateField.autoSize = TextFieldAutoSize.LEFT; dateArray.push(dateField); catField.text = dataList[i].category; catField.autoSize = TextFieldAutoSize.LEFT; catArray.push(catField); descField.text = dataList[i].description; descField.autoSize = TextFieldAutoSize.LEFT; descArray.push(descField); } } function imageLoaded(evt:Event):void { imagesLoaded++; if (imagesLoaded == totalImages) { showImage(); } } function showImage():void { addChild(imageContainer); imageContainer.addChild(imageHolder); imageContainer.addChild(titleContainer); imageContainer.addChild(dateContainer); imageContainer.addChild(catContainer); imageContainer.addChild(descContainer); changeImage(); } function changeImage():void { var currentImage:Loader = Loader(iArray[currImage]); imageHolder.addChild(currentImage); currentImage.x = (stage.stageWidth - currentImage.width)/2; currentImage.y = (imageHolder.height - currentImage.height)/2; imageHolder.mask = theMask; new Tween(imageHolder, "alpha", Regular.easeOut, 0, 1, 1, true); var titleField:TextField = TextField(titleArray[currImage]); titleContainer.addChild(titleField); titleField.x = 107; titleField.y = 365; var titleTween:Tween = new Tween(titleField, "alpha", Regular.easeOut, 0, 1, 1, true); var dateField:TextField = TextField(dateArray[currImage]); dateContainer.addChild(dateField); dateField.x = 107; dateField.y = 375; var dateTween:Tween = new Tween(dateField, "alpha", Regular.easeOut, 0, 1, 1, true); var catField:TextField = TextField(catArray[currImage]); catContainer.addChild(catField); catField.x = 107; catField.y = 385; var catTween:Tween = new Tween(catField, "alpha", Regular.easeOut, 0, 1, 1, true); var descField:TextField = TextField(descArray[currImage]); descContainer.addChild(descField); descField.x = 107; descField.y = 395; var descTween:Tween = new Tween(descField, "alpha", Regular.easeOut, 0, 1, 1, true); } function rotateImage(evt:TimerEvent) { hidePrev(); currImage++; if (currImage == totalImages) { currImage = 0; } changeImage(); } function hidePrev():void{ var oldImage:Loader = Loader(imageHolder.getChildAt(0)); oldTween = new Tween(oldImage,"alpha", Regular.easeOut, 1, 0, 1, true); oldTween.addEventListener(TweenEvent.MOTION_FINISH, onFadeOut) var oldTitle:TextField = TextField(titleContainer.getChildAt(0)); var oldTitleTween:Tween = new Tween(oldTitle,"alpha", Regular.easeOut, 1, 0, 1, true); var oldDate:TextField = TextField(dateContainer.getChildAt(0)); var oldDateTween:Tween = new Tween(oldDate,"alpha",Regular.easeOut,1,0,1,true); var oldCat:TextField = TextField(catContainer.getChildAt(0)); var oldCatTween:Tween = new Tween(oldCat,"alpha",Regular.easeOut,1,0,1,true); var oldDesc:TextField = TextField(descContainer.getChildAt(0)); var oldDescTween:Tween = new Tween(oldDesc,"alpha",Regular.easeOut,1,0,1,true); } function onFadeOut(evt:TweenEvent):void{ imageHolder.removeChildAt(0); titleContainer.removeChildAt(0); dateContainer.removeChildAt(0); catContainer.removeChildAt(0); descContainer.removeChildAt(0); } I'm no flash whiz, bet can generally figure most issues out by either analyzing the code, or digging around online; however, this has me stumped. Any help would really be appreciated, and I thank you all in advance.

Read the article

Ideas for multiplatform encrypted java mobile storage system

- by Fernando Miguélez

Objective I am currently designing the API for a multiplatform storage system that would offer same interface and capabilities accross following supported mobile Java Platforms: J2ME. Minimum configuration/profile CLDC 1.1/MIDP 2.0 with support for some necessary JSRs (JSR-75 for file storage). Android. No minimum platform version decided yet, but rather likely could be API level 7. Blackberry. It would use the same base source of J2ME but taking advantage of some advaced capabilities of the platform. No minimum configuration decided yet (maybe 4.6 because of 64 KB limitation for RMS on 4.5). Basically the API would sport three kind of stores: Files. These would allow standard directory/file manipulation (read/write through streams, create, mkdir, etc.). Preferences. It is a special store that handles properties accessed through keys (Similar to plain old java properties file but supporting some improvements such as different value data types such as SharedPreferences on Android platform) Local Message Queues. This store would offer basic message queue functionality. Considerations Inspired on JSR-75, all types of stores would be accessed in an uniform way by means of an URL following RFC 1738 conventions, but with custom defined prefixes (i.e. "file://" for files, "prefs://" for preferences or "queue://" for message queues). The address would refer to a virtual location that would be mapped to a physical storage object by each mobile platform implementation. Only files would allow hierarchical storage (folders) and access to external extorage memory cards (by means of a unit name, the same way as in JSR-75, but that would not change regardless of underlying platform). The other types would only support flat storage. The system should also support a secure version of all basic types. The user would indicate it by prefixing "s" to the URL (i.e. "sfile://" instead of "file://"). The API would only require one PIN (introduced only once) to access any kind of secure object types. Implementation issues For the implementation of both plaintext and encrypted stores, I would use the functionality available on the underlying platforms: Files. These are available on all platforms (J2ME only with JSR-75, but it is mandatory for our needs). The abstract File to actual File mapping is straight except for addressing issues. RMS. This type of store available on J2ME (and Blackberry) platforms is convenient for Preferences and maybe Message Queues (though depending on performance or size requirements these could be implemented by means of normal files). SharedPreferences. This type of storage, only available on Android, would match Preferences needs. SQLite databases. This could be used for message queues on Android (and maybe Blackberry). When it comes to encryption some requirements should be met: To ease the implementation it will be carried out on read/write operations basis on streams (for files), RMS Records, SharedPreferences key-value pairs, SQLite database columns. Every underlying storage object should use the same encryption key. Handling of encrypted stores should be the same as the unencrypted counterpart. The only difference (from the user point of view) accessing an encrypted store would be the addressing. The user PIN provides access to any secure storage object, but the change of it would not require to decrypt/re-encrypt all the encrypted data. Cryptographic capabilities of underlying platform should be used whenever it is possible, so we would use: J2ME: SATSA-CRYPTO if it is available (not mandatory) or lightweight BoncyCastle cryptographic framework for J2ME. Blackberry: RIM Cryptographic API or BouncyCastle Android: JCE with integraced cryptographic provider (BouncyCastle?) Doubts Having reached this point I was struck by some doubts about what solution would be more convenient, taking into account the limitation of the plataforms. These are some of my doubts: Encryption Algorithm for data. Would AES-128 be strong and fast enough? What alternatives for such scenario would you suggest? Encryption Mode. I have read about the weakness of ECB encryption versus CBC, but in this case the first would have the advantage of random access to blocks, which is interesting for seek functionality on files. What type of encryption mode would you choose instead? Is stream encryption suitable for this case? Key generation. There could be one key generated for each storage object (file, RMS RecordStore, etc.) or just use one for all the objects of the same type. The first seems "safer", though it would require some extra space on device. In your opinion what would the trade-offs of each? Key storage. For this case using a standard JKS (or PKCS#12) KeyStore file could be suited to store encryption keys, but I could also define a smaller structure (encryption-transformation / key data / checksum) that could be attached to each storage store (i.e. using addition files with the same name and special extension for plain files or embedded inside other types of objects such as RMS Record Stores). What approach would you prefer? And when it comes to using a standard KeyStore with multiple-key generation (given this is your preference), would it be better to use a record-store per storage object or just a global KeyStore keeping all keys (i.e. using the URL identifier of abstract storage object as alias)? Master key. The use of a master key seems obvious. This key should be protected by user PIN (introduced only once) and would allow access to the rest of encryption keys (they would be encrypted by means of this master key). Changing the PIN would only require to reencrypt this key and not all the encrypted data. Where would you keep it taking into account that if this got lost all data would be no further accesible? What further considerations should I take into account? Platform cryptography support. Do SATSA-CRYPTO-enabled J2ME phones really take advantage of some dedicated hardware acceleration (or other advantage I have not foreseen) and would this approach be prefered (whenever possible) over just BouncyCastle implementation? For the same reason is RIM Cryptographic API worth the license cost over BouncyCastle? Any comments, critics, further considerations or different approaches are welcome.

Read the article

IE7 doesn't render part of page until the window resizes or switch between tabs

- by BlackMael

I have a problem with IE7. I have a fixed layout for keeping the header and a sidepanel fixed on a page leaving only the "main content" area switch can happily scroll it's content. This layout works perfectly fine for IE6 and IE8, but sometimes one page may start "hiding" the content that should be showing in the "main content" area. The page finishes loading just fine. For a split second IE7 will render the main content just fine and then it will immediately hide it from view.. somewhere.. It would also seem that it only experiences this problem when there is enough content to force the "main content" area to scroll. By resizing the window or switching to another open tab and back again will cause IE7 to show the page as it was intended. Note the same problem does occur with IE8 in compatibility mode, but the page is rendered correctly in IE8 mode. If need be I can attach the basic CSS styling I use, but I first want to see if this is a known issue with IE7. Does IE7 have issues with positioned layout and overflow scrolling that is sometimes likes to forgot to finish rendering the page correctly until some window redraw event forces to finish rendering? Please remember, this exact same layout is used across multiple pages in the site as it is set up in a master page. It is just (in this case) one page that is experiencing this problem. Other pages with the exact same layout do render correctly. Even if the main content is full enough to also scroll. UPDATE: A related question which doesn't have an answer at this point. LATE UPDATE: Adding example masterpage and css Please note this same layout is the same for all the pages in the application. My problem with IE7 only occurs on one such page. All other pages have happily render correctly in IE7. Just one page, using the exact same layout, has issues where it sometimes hides the content in the "work-space" div. The master page <%@ Master Language="VB" CodeFile="MasterPage.master.vb" Inherits="shared_templates_MasterPage" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title></title> <link rel="Stylesheet" type="text/css" href="~/common/yui/2.7.0/build/reset-fonts/reset-fonts.css" runat="server" /> <link rel="Stylesheet" type="text/css" href="~/shared/css/layout.css" runat="server" /> <asp:ContentPlaceHolder ID="head" runat="server" /> </head> <body> <form id="form1" runat="server"> <asp:ScriptManager ID="ScriptManager1" runat="server" /> <div id="app-header"> </div> <div id="side-panel"> </div> <div id="work-space"> <asp:ContentPlaceHolder ID="WorkSpaceContentPlaceHolder" runat="server" /> </div> <div id="status-bar"> <asp:ContentPlaceHolder ID="StatusBarContentPlaceHolder" runat="server" /> </div> </form> </body> </html> The layout.css html { overflow: hidden; } body { overflow: hidden; padding: 0; margin: 0; width: 100%; height: 100%; background-color: white; } body, table, td, th, select, textarea, input { font-family: Tahoma, Arial, Sans-Serif; font-size: 9pt; } p { padding-left: 1em; margin-bottom: 1em; } #app-header { position: absolute; top: 0; left: 0; width: 100%; height: 80px; background-color: #dcdcdc; border-bottom: solid 4px #000; } #side-panel { position: absolute; top: 84px; left: 0px; bottom: 0px; overflow: auto; padding: 0; margin: 0; width: 227px; background-color: #AABCCA; border-right: solid 1px black; background-repeat: repeat-x; padding-top: 5px; } #work-space { position: absolute; top: 84px; left: 232px; right: 0px; padding: 0; margin: 0; bottom: 22px; overflow: auto; background-color: White; } #status-bar { position: absolute; height: 20px; left: 228px; right: 0px; padding: 0; margin: 0; bottom: 0px; border-top: solid 1px #c0c0c0; background-color: #f0f0f0; } The Default.aspx <%@ Page Title="Test" Language="VB" MasterPageFile="~/shared/templates/MasterPage.master" AutoEventWireup="false" CodeFile="Default.aspx.vb" Inherits="_Default" %> <asp:Content ID="WorkspaceContent" ContentPlaceHolderID="WorkSpaceContentPlaceHolder" Runat="Server"> Workspace <asp:ListView ID="DemoListView" runat="server" DataSourceID="DemoObjectDataSource" ItemPlaceholderID="DemoPlaceHolder"> <LayoutTemplate> <table style="border: 1px solid #a0a0a0; width: 600px"> <colgroup> <col width="80" /> <col /> <col width="80" /> <col width="120" /> </colgroup> <tbody> <asp:PlaceHolder ID="DemoPlaceHolder" runat="server" /> </tbody> </table> </LayoutTemplate> <ItemTemplate> <tr> <th><%#Eval("ID")%></th> <td><%#Eval("Name")%></td> <td><%#Eval("Size")%></td> <td><%#Eval("CreatedOn", "{0:yyyy-MM-dd HH:mm:ss}")%></td> </tr> </ItemTemplate> </asp:ListView> <asp:ObjectDataSource ID="DemoObjectDataSource" runat="server" OldValuesParameterFormatString="original_{0}" SelectMethod="GetData" TypeName="DemoLogic"> <SelectParameters> <asp:Parameter Name="path" Type="String" /> </SelectParameters> </asp:ObjectDataSource> </asp:Content> <asp:Content ID="StatusContent" ContentPlaceHolderID="StatusBarContentPlaceHolder" Runat="Server"> Ready OK. </asp:Content>

Read the article

Many to Many delete in NHibernate two parents with common association

- by Joshua Grippo

I have 3 top level entities in my app: Circuit, Issue, Document Circuits can contain Documents and Issues can contain Documents. When I delete a Circuit, I want it to delete the documents associated with it, unless it is used by something else. I would like this same behavior with Issues. I have it working when the only association is in the same table in the db, but if it is in another table, then it fails due to foreign key constraints. ex 1(This will cascade properly, because there is only a foreign constraint from Circuit to Document) Document1 exists. Circuit1 exists and contains a reference to Document1. If I delete Circuit1 then it deletes Document1 with it. ex 2(This will cascade properly, because there is only a foreign constraint from Circuit to Document.) Document1 exists. Circuit1 exists and contains a reference to Document1. Circuit2 exists and contains a reference to Document1. If I delete Circuit1 then it is deleted, but Document1 is not deleted because Circuit2 exists. If I then delete Circuit2, then Document1 is deleted. ex 3(This will throw an error, because when it deletes the Circuit it sees that there are no other circuits that reference the document so it tries to delete the document. However it should not, because there is an Issue that has a foreign constraint to the document.) Document 1 exists. Circuit1 exists and contains a reference to Document1. Issue1 exists and contains a reference to Document1. If I delete Circuit1, then it fails, because it tries to delete Document1, but Issues1 still has a reference. DB: This think won't let upload an image, so here is the ERD to the DB: http://lh3.ggpht.com/_jZWhe7NXay8/TROJhOd7qlI/AAAAAAAAAGU/rkni3oEANvc/CircuitIssues.gif Model: public class Circuit { public virtual int CircuitID { get; set; } public virtual string CJON { get; set; } public virtual IList<Document> Documents { get; set; } } public class Issue { public virtual int IssueID { get; set; } public virtual string Summary { get; set; } public virtual IList<Model.Document> Documents { get; set; } } public class Document { public virtual int DocumentID { get; set; } public virtual string Data { get; set; } } Mapping Files: <?xml version="1.0" encoding="utf-8"?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" namespace="Model" assembly="Model"> <class name="Circuit" table="Circuit"> <id name="CircuitID"> <column name="CircuitID" not-null="true"/> <generator class="identity" /> </id> <property name="CJON" column="CJON" type="string" not-null="true"/> <bag name="Documents" table="CircuitDocument" cascade="save-update,delete-orphan"> <key column="CircuitID"/> <many-to-many class="Document"> <column name="DocumentID" not-null="true"/> </many-to-many> </bag> </class> </hibernate-mapping> <?xml version="1.0" encoding="utf-8"?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" namespace="Model" assembly="Model"> <class name="Issue" table="Issue"> <id name="IssueID"> <column name="IssueID" not-null="true"/> <generator class="identity" /> </id> <property name="Summary" column="Summary" type="string" not-null="true"/> <bag name="Documents" table="IssueDocument" cascade="save-update,delete-orphan"> <key column="IssueID"/> <many-to-many class="Document"> <column name="DocumentID" not-null="true"/> </many-to-many> </bag> </class> </hibernate-mapping> <?xml version="1.0" encoding="utf-8"?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" namespace="Model" assembly="Model"> <class name="Document" table="Document"> <id name="DocumentID"> <column name="DocumentID" not-null="true"/> <generator class="identity" /> </id> <property name="Data" column="Data" type="string" not-null="true"/> </class> </hibernate-mapping> Code: using (ISession session = sessionFactory.OpenSession()) { var doc = new Model.Document() { Data = "Doc" }; var circuit = new Model.Circuit() { CJON = "circ" }; circuit.Documents = new List<Model.Document>(new Model.Document[] { doc }); var issue = new Model.Issue() { Summary = "iss" }; issue.Documents = new List<Model.Document>(new Model.Document[] { doc }); session.Save(circuit); session.Save(issue); session.Flush(); } using (ISession session = sessionFactory.OpenSession()) { foreach (var item in session.CreateCriteria<Model.Circuit>().List<Model.Circuit>()) { session.Delete(item); } //this flush fails, because there is a reference to a child document from issue session.Flush(); foreach (var item in session.CreateCriteria<Model.Issue>().List<Model.Issue>()) { session.Delete(item); } session.Flush(); }

Read the article

SINGLE SIGN ON SECURITY THREAT! FACEBOOK access_token broadcast in the open/clear

- by MOKANA

Subsequent to my posting there was a remark made that this was not really a question but I thought I did indeed postulate one. So that there is no ambiquity here is the question with a lead in: Since there is no data sent from Facebook during the Canvas Load process that is not at some point divulged, including the access_token, session and other data that could uniquely identify a user, does any one see any other way other than adding one more layer, i.e., a password, sent over the wire via HTTPS along with the access_toekn, that will insure unique untampered with security by the user? Using Wireshark I captured the local broadcast while loading my Canvas Application page. I was hugely surprised to see the access_token broadcast in the open, viewable for any one to see. This access_token is appended to any https call to the Facebook OpenGraph API. Using facebook as a single click log on has now raised huge concerns for me. It is stored in a session object in memory and the cookie is cleared upon app termination and after reviewing the FB.Init calls I saw a lot of HTTPS calls so I assumed the access_token was always encrypted. But last night I saw in the status bar a call from what was simply an http call that included the App ID so I felt I should sniff the Application Canvas load sequence. Today I did sniff the broadcast and in the attached image you can see that there are http calls with the access_token being broadcast in the open and clear for anyone to gain access to. Am I missing something, is what I am seeing and my interpretation really correct. If any one can sniff and get the access_token they can theorically make calls to the Graph API via https, even though the call back would still need to be the site established in Facebook's application set up. But what is truly a security threat is anyone using the access_token for access to their own site. I do not see the value of a single sign on via Facebook if the only thing that was established as secure was the access_token - becuase for what I can see it clearly is not secure. Access tokens that never have an expire date do not change. Access_tokens are different for every user, to access to another site could be held tight to just a single user, but compromising even a single user's data is unacceptable. http://www.creatingstory.com/images/InTheOpen.png Went back and did more research on this: FINDINGS: Went back an re ran the canvas application to verify that it was not any of my code that was not broadcasting. In this call: HTTP GET /connect.php/en_US/js/CacheData HTTP/1.1 The USER ID is clearly visible in the cookie. So USER_ID's are fully visible, but they are already. Anyone can go to pretty much any ones page and hover over the image and see the USER ID. So no big threat. APP_ID are also easily obtainable - but . . . http://www.creatingstory.com/images/InTheOpen2.png The above file clearly shows the FULL ACCESS TOKEN clearly in the OPEN via a Facebook initiated call. Am I wrong. TELL ME I AM WRONG because I want to be wrong about this. I have since reset my app secret so I am showing the real sniff of the Canvas Page being loaded. Additional data 02/20/2011: @ifaour - I appreciate the time you took to compile your response. I am pretty familiar with the OAuth process and have a pretty solid understanding of the signed_request unpacking and utilization of the access_token. I perform a substantial amount of my processing on the server and my Facebook server side flows are all complete and function without any flaw that I know of. The application secret is secure and never passed to the front end application and is also changed regularly. I am being as fanatical about security as I can be, knowing there is so much I don’t know that could come back and bite me. Two huge access_token issues: The issues concern the possible utilization of the access_token from the USER AGENT (browser). During the FB.INIT() process of the Facebook JavaScript SDK, a cookie is created as well as an object in memory called a session object. This object, along with the cookie contain the access_token, session, a secret, and uid and status of the connection. The session object is structured such that is supports both the new OAuth and the legacy flows. With OAuth, the access_token and status are pretty much al that is used in the session object. The first issue is that the access_token is used to make HTTPS calls to the GRAPH API. If you had the access_token, you could do this from any browser: https://graph.facebook.com/220439?access_token=... and it will return a ton of information about the user. So any one with the access token can gain access to a Facebook account. You can also make additional calls to any info the user has granted access to the application tied to the access_token. At first I thought that a call into the GRAPH had to have a Callback to the URL established in the App Setup, but I tested it as mentioned below and it will return info back right into the browser. Adding that callback feature would be a good idea I think, tightens things up a bit. The second issue is utilization of some unique private secured data that identifies the user to the third party data base, i.e., like in my case, I would use a single sign on to populate user information into my database using this unique secured data item (i.e., access_token which contains the APP ID, the USER ID, and a hashed with secret sequence). None of this is a problem on the server side. You get a signed_request, you unpack it with secret, make HTTPS calls, get HTTPS responses back. When a user has information entered via the USER AGENT(browser) that must be stored via a POST, this unique secured data element would be sent via HTTPS such that they are validated prior to data base insertion. However, If there is NO secured piece of unique data that is supplied via the single sign on process, then there is no way to guarantee unauthorized access. The access_token is the one piece of data that is utilized by Facebook to make the HTTPS calls into the GRAPH API. it is considered unique in regards to BOTH the USER and the APPLICATION and is initially secure via the signed_request packaging. If however, it is subsequently transmitted in the clear and if I can sniff the wire and obtain the access_token, then I can pretend to be the application and gain the information they have authorized the application to see. I tried the above example from a Safari and IE browser and it returned all of my information to me in the browser. In conclusion, the access_token is part of the signed_request and that is how the application initially obtains it. After OAuth authentication and authorization, i.e., the USER has logged into Facebook and then runs your app, the access_token is stored as mentioned above and I have sniffed it such that I see it stored in a Cookie that is transmitted over the wire, resulting in there being NO UNIQUE SECURED IDENTIFIABLE piece of information that can be used to support interaction with the database, or in other words, unless there were one more piece of secure data sent along with the access_token to my database, i.e., a password, I would not be able to discern if it is a legitimate call. Luckily I utilized secure AJAX via POST and the call has to come from the same domain, but I am sure there is a way to hijack that. I am totally open to any ideas on this topic on how to uniquely identify my USERS other than adding another layer (password) via this single sign on process or if someone would just share with me that I read and analyzed my data incorrectly and that the access_token is always secure over the wire. Mahalo nui loa in advance.

Read the article

Cyrus on CentOS with sasl / pam / ldap

- by Oscar

SASL/PAM/LDAP is driving me crazy... that's what I read a lot when googling for problems in this area, and what I experience myself :-S I'm trying to get Cyrus imap working for virtual hosting on CentOS with this authorisation backend and really don't know what's happening. In saslauthd I configured the LDAP search filter to use, but it looks like pam completely ignores it. Here's what I do for testing (done more tests but all with similar results): [root@testserv ~]# imtest -u [email protected] -a [email protected] WARNING: no hostname supplied, assuming localhost S: * OK [CAPABILITY IMAP4 IMAP4rev1 LITERAL+ ID STARTTLS] testserv. Cyrus IMAP4 v2.3.7-Invoca-RPM-2.3.7-7.el5_6.4 server ready C: C01 CAPABILITY S: * CAPABILITY IMAP4 IMAP4rev1 LITERAL+ ID STARTTLS ACL RIGHTS=kxte QUOTA MAILBOX-REFERRALS NAMESPACE UIDPLUS NO_ATOMIC_RENAME UNSELECT CHILDREN MULTIAPPEND BINARY SORT SORT=MODSEQ THREAD=ORDEREDSUBJECT THREAD=REFERENCES ANNOTATEMORE CATENATE CONDSTORE IDLE LISTEXT LIST-SUBSCRIBED X-NETSCAPE URLAUTH S: C01 OK Completed Please enter your password: C: L01 LOGIN [email protected] {6} S: + go ahead C: <omitted> S: L01 NO Login failed: authentication failure Authentication failed. generic failure Security strength factor: 0 C: Q01 LOGOUT * BYE LOGOUT received Q01 OK Completed Connection closed. The LDAP entry does exist (and so does the mailbox in Cyrus): [root@testserv ~]# ldapsearch -WxD cn=Manager,o=mydomain,c=com [email protected] Enter LDAP Password: # extended LDIF # # LDAPv3 # base <> with scope subtree # filter: [email protected] # requesting: ALL # # myuser, accounts, testserv.mydomain.com, mydomain, com dn: uid=myuser,ou=accounts,dc=testserv.mydomain.com,o=mydomain,c=com objectClass: top objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson objectClass: posixAccount objectClass: shadowAccount uidNumber: 16 uid: myuser gidNumber: 5 givenName: My sn: Name mail: [email protected] cn: My Name userPassword:: dYN5ebB0fXhNRn1pZllhRnJX7Uk= shadowLastChange: 15176 homeDirectory: /dev/null # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 This is what I get in /var/log/messages Aug 2 04:00:11 testserv cyrus/imap[12514]: auxpropfunc error invalid parameter supplied Aug 2 04:00:19 testserv saslauthd[5926]: do_auth : auth failure: [[email protected]] [service=imap] [realm=testserv.mydomain.com] [mech=pam] [reason=PAM auth error] ... /var/adm/auth.log Aug 2 04:00:11 testserv cyrus/imap[12514]: auxpropfunc error invalid parameter supplied Aug 2 04:00:11 testserv cyrus/imap[12514]: _sasl_plugin_load failed on sasl_auxprop_plug_init for plugin: ldapdb Aug 2 04:00:19 testserv saslauthd[5926]: DEBUG: auth_pam: pam_authenticate failed: User not known to the underlying authentication module Aug 2 04:00:19 testserv saslauthd[5926]: do_auth : auth failure: [[email protected]] [service=imap] [realm=testserv.mydomain.com] [mech=pam] [reason=PAM auth error] (AFAIK I can ignore the auxprop msg) ... and /var/log/slapd.log: Aug 2 04:00:19 testserv slapd[5968]: conn=61 fd=27 ACCEPT from IP=127.0.0.1:51403 (IP=0.0.0.0:389) Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=0 BIND dn="" method=128 Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=0 RESULT tag=97 err=0 text= Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=1 SRCH base="o=mydomain,c=com" scope=2 deref=0 filter="([email protected])" Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=1 SEARCH RESULT tag=101 err=0 nentries=0 text= Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=2 UNBIND Aug 2 04:00:19 testserv slapd[5968]: conn=61 fd=27 closed These are the settings in In /etc/imapd.conf: sasl_mech_list: PLAIN LOGIN sasl_pwcheck_method: saslauthd ## sasl_auxprop_plugin: sasldb sasl_auto_transition: no and my sasl config: [root@testserv ~]# cat /etc/sysconfig/saslauthd # Directory in which to place saslauthd's listening socket, pid file, and so # on. This directory must already exist. SOCKETDIR=/var/run/saslauthd # Mechanism to use when checking passwords. Run "saslauthd -v" to get a list # of which mechanism your installation was compiled with the ablity to use. MECH=pam # Additional flags to pass to saslauthd on the command line. See saslauthd(8) # for the list of accepted flags. FLAGS="-c -r -O /etc/saslauthd.conf" [root@testserv ~]# cat /etc/saslauthd.conf ldap_servers: ldap://127.0.0.1/ ldap_search_base: dc=%d,o=mydomain,c=com ldap_auth_method: bind #ldap_filter: (|(uid=%u)((&(mail=%u@%d)(accountStatus=active))) ldap_filter: (&(mail=%u@%d)(accountStatus=active)) ldap_debug: 1 ldap_version: 3 The accountStatus=active is not in ldap yet, but that doesn't make a difference since I don't see it in the filter... that's not the reason for the failure. The weird thing is, I do get an error when I rename or remove /etc/saslauthd.conf, but when the file exists it seems happily ignored... The filter in slapd.log seems to be taken from /etc/ldap.conf. Apart from some timers, that only contains: host 127.0.0.1 base o=mydomain,c=com pam_login_attribute mail Outcommenting the pam_login_attribute results in this filter in slapd.log: filter="([email protected])" Pam-imap looks like this: [root@testserv ~]# cat /etc/pam.d/imap auth required pam_ldap.so debug account required pam_ldap.so debug #auth sufficient pam_unix.so likeauth nullok #auth sufficient pam_ldap.so use_first_pass #auth required pam_deny.so #account sufficient pam_unix.so #account sufficient pam_ldap.so The outcommented stuff is because I don't have the cyrus admin user in Ldap; that's a Linux user. That works fine when uncommented, but I still need to play around with that a little and first I wanna get imap working. Finally nsswitch: [root@testserv ~]# cat /etc/nsswitch.conf # # /etc/nsswitch.conf # # An example Name Service Switch config file. This file should be # sorted with the most-used services at the beginning. # # The entry '[NOTFOUND=return]' means that the search for an # entry should stop if the search in the previous entry turned # up nothing. Note that if the search failed due to some other reason # (like no NIS server responding) then the search continues with the # next entry. # # Legal entries are: # # nisplus or nis+ Use NIS+ (NIS version 3) # nis or yp Use NIS (NIS version 2), also called YP # dns Use DNS (Domain Name Service) # files Use the local files # db Use the local database (.db) files # compat Use NIS on compat mode # hesiod Use Hesiod for user lookups # [NOTFOUND=return] Stop searching if not found so far # # To use db, put the "db" in front of "files" for entries you want to be # looked up first in the databases # # Example: #passwd: db files nisplus nis #shadow: db files nisplus nis #group: db files nisplus nis passwd: compat ldap group: compat ldap shadow: compat ldap hosts: files dns bootparams: nisplus [NOTFOUND=return] files ethers: files netmasks: files networks: files protocols: files rpc: files services: files netgroup: nisplus publickey: nisplus automount: files nisplus aliases: files nisplus Any info where to start looking will be greatly appreciated! Thnx in advance

Read the article

In Exim, is RBL spam rejected prior to being scanned by SpamAssassin?

- by user955664

I've recently been battling spam issues on our mail server. One account in particular was getting hammered with incoming spam. SpamAssassin's memory use is one of our concerns. What I've done is enable RBLs in Exim. I now see many rejection notices in the Exim log based on the various RBLs, which is good. However, when I run Eximstats, the numbers seem to be the same as they were prior to the enabling of the RBLs. I am assuming because the email is still logged in some way prior to the rejection. Is that what's happening, or am I missing something else? Does anyone know if these emails are rejected prior to being processed by SpamAssassin? Or does anyone know how I'd be able to find out? Is there a standard way to generate SpamAssassin stats, similar to Eximstats, so that I could compare the numbers? Thank you for your time and any advice. Edit: Here is the ACL section of my Exim configuration file ###################################################################### # ACLs # ###################################################################### begin acl # ACL that is used after the RCPT command check_recipient: # to block certain wellknown exploits, Deny for local domains if # local parts begin with a dot or contain @ % ! / | deny domains = +local_domains local_parts = ^[.] : ^.*[@%!/|] # to restrict port 587 to authenticated users only # see also daemon_smtp_ports above accept hosts = +auth_relay_hosts condition = ${if eq {$interface_port}{587} {yes}{no}} endpass message = relay not permitted, authentication required authenticated = * # allow local users to send outgoing messages using slashes # and vertical bars in their local parts. # Block outgoing local parts that begin with a dot, slash, or vertical # bar but allows them within the local part. # The sequence \..\ is barred. The usage of @ % and ! is barred as # before. The motivation is to prevent your users (or their virii) # from mounting certain kinds of attacks on remote sites. deny domains = !+local_domains local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./ # local source whitelist # accept if the source is local SMTP (i.e. not over TCP/IP). # Test for this by testing for an empty sending host field. accept hosts = : # sender domains whitelist # accept if sender domain is in whitelist accept sender_domains = +whitelist_domains # sender hosts whitelist # accept if sender host is in whitelist accept hosts = +whitelist_hosts accept hosts = +whitelist_hosts_ip # envelope senders whitelist # accept if envelope sender is in whitelist accept senders = +whitelist_senders # accept mail to postmaster in any local domain, regardless of source accept local_parts = postmaster domains = +local_domains # accept mail to abuse in any local domain, regardless of source accept local_parts = abuse domains = +local_domains # accept mail to hostmaster in any local domain, regardless of source accept local_parts = hostmaster domains =+local_domains # OPTIONAL MODIFICATIONS: # If the page you're using to notify senders of blocked email of how # to get their address unblocked will use a web form to send you email so # you'll know to unblock those senders, then you may leave these lines # commented out. However, if you'll be telling your senders of blocked # email to send an email to [email protected], then you should # replace "errors" with the left side of the email address you'll be # using, and "example.com" with the right side of the email address and # then uncomment the second two lines, leaving the first one commented. # Doing this will mean anyone can send email to this specific address, # even if they're at a blocked domain, and even if your domain is using # blocklists. # accept mail to [email protected], regardless of source # accept local_parts = errors # domains = example.com # deny so-called "legal" spammers" deny message = Email blocked by LBL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains sender_domains = +blacklist_domains # deny using hostname in bad_sender_hosts blacklist deny message = Email blocked by BSHL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains hosts = +bad_sender_hosts # deny using IP in bad_sender_hosts blacklist deny message = Email blocked by BSHL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains hosts = +bad_sender_hosts_ip # deny using email address in blacklist_senders deny message = Email blocked by BSAL - to unblock see http://www.example.com/ domains = +use_rbl_domains senders = +blacklist_senders # By default we do NOT require sender verification. # Sender verification denies unless sender address can be verified: # If you want to require sender verification, i.e., that the sending # address is routable and mail can be delivered to it, then # uncomment the next line. If you do not want to require sender # verification, leave the line commented out #require verify = sender # deny using .spamhaus deny message = Email blocked by SPAMHAUS - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains dnslists = sbl.spamhaus.org # deny using ordb # deny message = Email blocked by ORDB - to unblock see http://www.example.com/ # # only for domains that do want to be tested against RBLs # domains = +use_rbl_domains # dnslists = relays.ordb.org # deny using sorbs smtp list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains dnslists = dnsbl.sorbs.net=127.0.0.5 # Next deny stuff from more "fuzzy" blacklists # but do bypass all checking for whitelisted host names # and for authenticated users # deny using spamcop deny message = Email blocked by SPAMCOP - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = bl.spamcop.net # deny using njabl deny message = Email blocked by NJABL - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = dnsbl.njabl.org # deny using cbl deny message = Email blocked by CBL - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = cbl.abuseat.org # deny using all other sorbs ip-based blocklist besides smtp list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = dnsbl.sorbs.net!=127.0.0.6 # deny using sorbs name based list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ domains =+use_rbl_domains # rhsbl list is name based dnslists = rhsbl.sorbs.net/$sender_address_domain # accept if address is in a local domain as long as recipient can be verified accept domains = +local_domains endpass message = "Unknown User" verify = recipient # accept if address is in a domain for which we relay as long as recipient # can be verified accept domains = +relay_domains endpass verify=recipient # accept if message comes for a host for which we are an outgoing relay # recipient verification is omitted because many MUA clients don't cope # well with SMTP error responses. If you are actually relaying from MTAs # then you should probably add recipient verify here accept hosts = +relay_hosts accept hosts = +auth_relay_hosts endpass message = authentication required authenticated = * deny message = relay not permitted # default at end of acl causes a "deny", but line below will give # an explicit error message: deny message = relay not permitted # ACL that is used after the DATA command check_message: accept

Read the article

A free standing ASP.NET Pager Web Control

- by Rick Strahl

Paging in ASP.NET has been relatively easy with stock controls supporting basic paging functionality. However, recently I built an MVC application and one of the things I ran into was that I HAD TO build manual paging support into a few of my pages. Dealing with list controls and rendering markup is easy enough, but doing paging is a little more involved. I ended up with a small but flexible component that can be dropped anywhere. As it turns out the task of creating a semi-generic Pager control for MVC was fairly easily. Now I’m back to working in Web Forms and thought to myself that the way I created the pager in MVC actually would also work in ASP.NET – in fact quite a bit easier since the whole thing can be conveniently wrapped up into an easily reusable control. A standalone pager would provider easier reuse in various pages and a more consistent pager display regardless of what kind of 'control’ the pager is associated with. Why a Pager Control? At first blush it might sound silly to create a new pager control – after all Web Forms has pretty decent paging support, doesn’t it? Well, sort of. Yes the GridView control has automatic paging built in and the ListView control has the related DataPager control. The built in ASP.NET paging has several issues though: Postback and JavaScript requirements If you look at paging links in ASP.NET they are always postback links with javascript:__doPostback() calls that go back to the server. While that works fine and actually has some benefit like the fact that paging saves changes to the page and post them back, it’s not very SEO friendly. Basically if you use javascript based navigation nosearch engine will follow the paging links which effectively cuts off list content on the first page. The DataPager control does support GET based links via the QueryStringParameter property, but the control is effectively tied to the ListView control (which is the only control that implements IPageableItemContainer). DataSource Controls required for Efficient Data Paging Retrieval The only way you can get paging to work efficiently where only the few records you display on the page are queried for and retrieved from the database you have to use a DataSource control - only the Linq and Entity DataSource controls support this natively. While you can retrieve this data yourself manually, there’s no way to just assign the page number and render the pager based on this custom subset. Other than that default paging requires a full resultset for ASP.NET to filter the data and display only a subset which can be very resource intensive and wasteful if you’re dealing with largish resultsets (although I’m a firm believer in returning actually usable sets :-}). If you use your own business layer that doesn’t fit an ObjectDataSource you’re SOL. That’s a real shame too because with LINQ based querying it’s real easy to retrieve a subset of data that is just the data you want to display but the native Pager functionality doesn’t support just setting properties to display just the subset AFAIK. DataPager is not Free Standing The DataPager control is the closest thing to a decent Pager implementation that ASP.NET has, but alas it’s not a free standing component – it works off a related control and the only one that it effectively supports from the stock ASP.NET controls is the ListView control. This means you can’t use the same data pager formatting for a grid and a list view or vice versa and you’re always tied to the control. Paging Events In order to handle paging you have to deal with paging events. The events fire at specific time instances in the page pipeline and because of this you often have to handle data binding in a way to work around the paging events or else end up double binding your data sources based on paging. Yuk. Styling The GridView pager is a royal pain to beat into submission for styled rendering. The DataPager control has many more options and template layout and it renders somewhat cleaner, but it too is not exactly easy to get a decent display for. Not a Generic Solution The problem with the ASP.NET controls too is that it’s not generic. GridView, DataGrid use their own internal paging, ListView can use a DataPager and if you want to manually create data layout – well you’re on your own. IOW, depending on what you use you likely have very different looking Paging experiences. So, I figured I’ve struggled with this once too many and finally sat down and built a Pager control. The Pager Control My goal was to create a totally free standing control that has no dependencies on other controls and certainly no requirements for using DataSource controls. The idea is that you should be able to use this pager control without any sort of data requirements at all – you should just be able to set properties and be able to display a pager. The Pager control I ended up with has the following features: Completely free standing Pager control – no control or data dependencies Complete manual control – Pager can render without any data dependency Easy to use: Only need to set PageSize, ActivePage and TotalItems Supports optional filtering of IQueryable for efficient queries and Pager rendering Supports optional full set filtering of IEnumerable<T> and DataTable Page links are plain HTTP GET href Links Control automatically picks up Page links on the URL and assigns them (automatic page detection no page index changing events to hookup) Full CSS Styling support On the downside there’s no templating support for the control so the layout of the pager is relatively fixed. All elements however are stylable and there are options to control the text, and layout options such as whether to display first and last pages and the previous/next buttons and so on. To give you an idea what the pager looks like, here are two differently styled examples (all via CSS): The markup for these two pagers looks like this: <ww:Pager runat="server" id="ItemPager" PageSize="5" PageLinkCssClass="gridpagerbutton" SelectedPageCssClass="gridpagerbutton-selected" PagesTextCssClass="gridpagertext" CssClass="gridpager" RenderContainerDiv="true" ContainerDivCssClass="gridpagercontainer" MaxPagesToDisplay="6" PagesText="Item Pages:" NextText="next" PreviousText="previous" /> <ww:Pager runat="server" id="ItemPager2" PageSize="5" RenderContainerDiv="true" MaxPagesToDisplay="6" /> The latter example uses default style settings so it there’s not much to set. The first example on the other hand explicitly assigns custom styles and overrides a few of the formatting options. Styling The styling is based on a number of CSS classes of which the the main pager, pagerbutton and pagerbutton-selected classes are the important ones. Other styles like pagerbutton-next/prev/first/last are based on the pagerbutton style. The default styling shown for the red outlined pager looks like this: .pagercontainer { margin: 20px 0; background: whitesmoke; padding: 5px; } .pager { float: right; font-size: 10pt; text-align: left; } .pagerbutton,.pagerbutton-selected,.pagertext { display: block; float: left; text-align: center; border: solid 2px maroon; min-width: 18px; margin-left: 3px; text-decoration: none; padding: 4px; } .pagerbutton-selected { font-size: 130%; font-weight: bold; color: maroon; border-width: 0px; background: khaki; } .pagerbutton-first { margin-right: 12px; } .pagerbutton-last,.pagerbutton-prev { margin-left: 12px; } .pagertext { border: none; margin-left: 30px; font-weight: bold; } .pagerbutton a { text-decoration: none; } .pagerbutton:hover { background-color: maroon; color: cornsilk; } .pagerbutton-prev { background-image: url(images/prev.png); background-position: 2px center; background-repeat: no-repeat; width: 35px; padding-left: 20px; } .pagerbutton-next { background-image: url(images/next.png); background-position: 40px center; background-repeat: no-repeat; width: 35px; padding-right: 20px; margin-right: 0px; } Yup that’s a lot of styling settings although not all of them are required. The key ones are pagerbutton, pager and pager selection. The others (which are implicitly created by the control based on the pagerbutton style) are for custom markup of the ‘special’ buttons. In my apps I tend to have two kinds of pages: Those that are associated with typical ‘grid’ displays that display purely tabular data and those that have a more looser list like layout. The two pagers shown above represent these two views and the pager and gridpager styles in my standard style sheet reflect these two styles. Configuring the Pager with Code Finally lets look at what it takes to hook up the pager. As mentioned in the highlights the Pager control is completely independent of other controls so if you just want to display a pager on its own it’s as simple as dropping the control and assigning the PageSize, ActivePage and either TotalPages or TotalItems. So for this markup: <ww:Pager runat="server" id="ItemPagerManual" PageSize="5" MaxPagesToDisplay="6" /> I can use code as simple as: ItemPagerManual.PageSize = 3; ItemPagerManual.ActivePage = 4;ItemPagerManual.TotalItems = 20; Note that ActivePage is not required - it will automatically use any Page=x query string value and assign it, although you can override it as I did above. TotalItems can be any value that you retrieve from a result set or manually assign as I did above. A more realistic scenario based on a LINQ to SQL IQueryable result is even easier. In this example, I have a UserControl that contains a ListView control that renders IQueryable data. I use a User Control here because there are different views the user can choose from with each view being a different user control. This incidentally also highlights one of the nice features of the pager: Because the pager is independent of the control I can put the pager on the host page instead of into each of the user controls. IOW, there’s only one Pager control, but there are potentially many user controls/listviews that hold the actual display data. The following code demonstrates how to use the Pager with an IQueryable that loads only the records it displays: protected voidPage_Load(objectsender, EventArgs e) { Category = Request.Params["Category"] ?? string.Empty; IQueryable<wws_Item> ItemList = ItemRepository.GetItemsByCategory(Category); // Update the page and filter the list down ItemList = ItemPager.FilterIQueryable<wws_Item>(ItemList); // Render user control with a list view Control ulItemList = LoadControl("~/usercontrols/" + App.Configuration.ItemListType + ".ascx"); ((IInventoryItemListControl)ulItemList).InventoryItemList = ItemList; phItemList.Controls.Add(ulItemList); // placeholder } The code uses a business object to retrieve Items by category as an IQueryable which means that the result is only an expression tree that hasn’t execute SQL yet and can be further filtered. I then pass this IQueryable to the FilterIQueryable() helper method of the control which does two main things: Filters the IQueryable to retrieve only the data displayed on the active page Sets the Totaltems property and calculates TotalPages on the Pager and that’s it! When the Pager renders it uses those values, plus the PageSize and ActivePage properties to render the Pager. In addition to IQueryable there are also filter methods for IEnumerable<T> and DataTable, but these versions just filter the data by removing rows/items from the entire already retrieved data. Output Generated and Paging Links The output generated creates pager links as plain href links. Here’s what the output looks like: <div id="ItemPager" class="pagercontainer"> <div class="pager"> <span class="pagertext">Pages: </span><a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=1" class="pagerbutton" />1</a> <a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=2" class="pagerbutton" />2</a> <a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=3" class="pagerbutton" />3</a> <span class="pagerbutton-selected">4</span> <a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=5" class="pagerbutton" />5</a> <a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=6" class="pagerbutton" />6</a> <a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=20" class="pagerbutton pagerbutton-last" />20</a> <a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=3" class="pagerbutton pagerbutton-prev" />Prev</a> <a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=5" class="pagerbutton pagerbutton-next" />Next</a></div> <br clear="all" /> </div> </div> The links point back to the current page and simply append a Page= page link into the page. When the page gets reloaded with the new page number the pager automatically detects the page number and automatically assigns the ActivePage property which results in the appropriate page to be displayed. The code shown in the previous section is all that’s needed to handle paging. Note that HTTP GET based paging is different than the Postback paging ASP.NET uses by default. Postback paging preserves modified page content when clicking on pager buttons, but this control will simply load a new page – no page preservation at this time. The advantage of not using Postback paging is that the URLs generated are plain HTML links that a search engine can follow where __doPostback() links are not. Pager with a Grid The pager also works in combination with grid controls so it’s easy to bypass the grid control’s paging features if desired. In the following example I use a gridView control and binds it to a DataTable result which is also filterable by the Pager control. The very basic plain vanilla ASP.NET grid markup looks like this: <div style="width: 600px; margin: 0 auto;padding: 20px; "> <asp:DataGrid runat="server" AutoGenerateColumns="True" ID="gdItems" CssClass="blackborder" style="width: 600px;"> <AlternatingItemStyle CssClass="gridalternate" /> <HeaderStyle CssClass="gridheader" /> </asp:DataGrid> <ww:Pager runat="server" ID="Pager" CssClass="gridpager" ContainerDivCssClass="gridpagercontainer" PageLinkCssClass="gridpagerbutton" SelectedPageCssClass="gridpagerbutton-selected" PageSize="8" RenderContainerDiv="true" MaxPagesToDisplay="6" /> </div> and looks like this when rendered: using custom set of CSS styles. The code behind for this code is also very simple: protected void Page_Load(object sender, EventArgs e) { string category = Request.Params["category"] ?? ""; busItem itemRep = WebStoreFactory.GetItem(); var items = itemRep.GetItemsByCategory(category) .Select(itm => new {Sku = itm.Sku, Description = itm.Description}); // run query into a DataTable for demonstration DataTable dt = itemRep.Converter.ToDataTable(items,"TItems"); // Remove all items not on the current page dt = Pager.FilterDataTable(dt,0); // bind and display gdItems.DataSource = dt; gdItems.DataBind(); } A little contrived I suppose since the list could already be bound from the list of elements, but this is to demonstrate that you can also bind against a DataTable if your business layer returns those. Unfortunately there’s no way to filter a DataReader as it’s a one way forward only reader and the reader is required by the DataSource to perform the bindings. However, you can still use a DataReader as long as your business logic filters the data prior to rendering and provides a total item count (most likely as a second query). Control Creation The control itself is a pretty brute force ASP.NET control. Nothing clever about this other than some basic rendering logic and some simple calculations and update routines to determine which buttons need to be shown. You can take a look at the full code from the West Wind Web Toolkit’s Repository (note there are a few dependencies). To give you an idea how the control works here is the Render() method: /// <summary> /// overridden to handle custom pager rendering for runtime and design time /// </summary> /// <param name="writer"></param> protected override void Render(HtmlTextWriter writer) { base.Render(writer); if (TotalPages == 0 && TotalItems > 0) TotalPages = CalculateTotalPagesFromTotalItems(); if (DesignMode) TotalPages = 10; // don't render pager if there's only one page if (TotalPages < 2) return; if (RenderContainerDiv) { if (!string.IsNullOrEmpty(ContainerDivCssClass)) writer.AddAttribute("class", ContainerDivCssClass); writer.RenderBeginTag("div"); } // main pager wrapper writer.WriteBeginTag("div"); writer.AddAttribute("id", this.ClientID); if (!string.IsNullOrEmpty(CssClass)) writer.WriteAttribute("class", this.CssClass); writer.Write(HtmlTextWriter.TagRightChar + "\r\n"); // Pages Text writer.WriteBeginTag("span"); if (!string.IsNullOrEmpty(PagesTextCssClass)) writer.WriteAttribute("class", PagesTextCssClass); writer.Write(HtmlTextWriter.TagRightChar); writer.Write(this.PagesText); writer.WriteEndTag("span"); // if the base url is empty use the current URL FixupBaseUrl(); // set _startPage and _endPage ConfigurePagesToRender(); // write out first page link if (ShowFirstAndLastPageLinks && _startPage != 1) { writer.WriteBeginTag("a"); string pageUrl = StringUtils.SetUrlEncodedKey(BaseUrl, QueryStringPageField, (1).ToString()); writer.WriteAttribute("href", pageUrl); if (!string.IsNullOrEmpty(PageLinkCssClass)) writer.WriteAttribute("class", PageLinkCssClass + " " + PageLinkCssClass + "-first"); writer.Write(HtmlTextWriter.SelfClosingTagEnd); writer.Write("1"); writer.WriteEndTag("a"); writer.Write(" "); } // write out all the page links for (int i = _startPage; i < _endPage + 1; i++) { if (i == ActivePage) { writer.WriteBeginTag("span"); if (!string.IsNullOrEmpty(SelectedPageCssClass)) writer.WriteAttribute("class", SelectedPageCssClass); writer.Write(HtmlTextWriter.TagRightChar); writer.Write(i.ToString()); writer.WriteEndTag("span"); } else { writer.WriteBeginTag("a"); string pageUrl = StringUtils.SetUrlEncodedKey(BaseUrl, QueryStringPageField, i.ToString()).TrimEnd('&'); writer.WriteAttribute("href", pageUrl); if (!string.IsNullOrEmpty(PageLinkCssClass)) writer.WriteAttribute("class", PageLinkCssClass); writer.Write(HtmlTextWriter.SelfClosingTagEnd); writer.Write(i.ToString()); writer.WriteEndTag("a"); } writer.Write("\r\n"); } // write out last page link if (ShowFirstAndLastPageLinks && _endPage < TotalPages) { writer.WriteBeginTag("a"); string pageUrl = StringUtils.SetUrlEncodedKey(BaseUrl, QueryStringPageField, TotalPages.ToString()); writer.WriteAttribute("href", pageUrl); if (!string.IsNullOrEmpty(PageLinkCssClass)) writer.WriteAttribute("class", PageLinkCssClass + " " + PageLinkCssClass + "-last"); writer.Write(HtmlTextWriter.SelfClosingTagEnd); writer.Write(TotalPages.ToString()); writer.WriteEndTag("a"); } // Previous link if (ShowPreviousNextLinks && !string.IsNullOrEmpty(PreviousText) && ActivePage > 1) { writer.Write(" "); writer.WriteBeginTag("a"); string pageUrl = StringUtils.SetUrlEncodedKey(BaseUrl, QueryStringPageField, (ActivePage - 1).ToString()); writer.WriteAttribute("href", pageUrl); if (!string.IsNullOrEmpty(PageLinkCssClass)) writer.WriteAttribute("class", PageLinkCssClass + " " + PageLinkCssClass + "-prev"); writer.Write(HtmlTextWriter.SelfClosingTagEnd); writer.Write(PreviousText); writer.WriteEndTag("a"); } // Next link if (ShowPreviousNextLinks && !string.IsNullOrEmpty(NextText) && ActivePage < TotalPages) { writer.Write(" "); writer.WriteBeginTag("a"); string pageUrl = StringUtils.SetUrlEncodedKey(BaseUrl, QueryStringPageField, (ActivePage + 1).ToString()); writer.WriteAttribute("href", pageUrl); if (!string.IsNullOrEmpty(PageLinkCssClass)) writer.WriteAttribute("class", PageLinkCssClass + " " + PageLinkCssClass + "-next"); writer.Write(HtmlTextWriter.SelfClosingTagEnd); writer.Write(NextText); writer.WriteEndTag("a"); } writer.WriteEndTag("div"); if (RenderContainerDiv) { if (RenderContainerDivBreak) writer.Write("<br clear=\"all\" />\r\n"); writer.WriteEndTag("div"); } } As I said pretty much brute force rendering based on the control’s property settings of which there are quite a few: You can also see the pager in the designer above. unfortunately the VS designer (both 2010 and 2008) fails to render the float: left CSS styles properly and starts wrapping after margins are applied in the special buttons. Not a big deal since VS does at least respect the spacing (the floated elements overlay). Then again I’m not using the designer anyway :-}. Filtering Data What makes the Pager easy to use is the filter methods built into the control. While this functionality is clearly not the most politically correct design choice as it violates separation of concerns, it’s very useful for typical pager operation. While I actually have filter methods that do something similar in my business layer, having it exposed on the control makes the control a lot more useful for typical databinding scenarios. Of course these methods are optional – if you have a business layer that can provide filtered page queries for you can use that instead and assign the TotalItems property manually. There are three filter method types available for IQueryable, IEnumerable and for DataTable which tend to be the most common use cases in my apps old and new. The IQueryable version is pretty simple as it can simply rely on on .Skip() and .Take() with LINQ: /// <summary> /// <summary> /// Queries the database for the ActivePage applied manually /// or from the Request["page"] variable. This routine /// figures out and sets TotalPages, ActivePage and /// returns a filtered subset IQueryable that contains /// only the items from the ActivePage. /// </summary> /// <param name="query"></param> /// <param name="activePage"> /// The page you want to display. Sets the ActivePage property when passed. /// Pass 0 or smaller to use ActivePage setting. /// </param> /// <returns></returns> public IQueryable<T> FilterIQueryable<T>(IQueryable<T> query, int activePage) where T : class, new() { ActivePage = activePage < 1 ? ActivePage : activePage; if (ActivePage < 1) ActivePage = 1; TotalItems = query.Count(); if (TotalItems <= PageSize) { ActivePage = 1; TotalPages = 1; return query; } int skip = ActivePage - 1; if (skip > 0) query = query.Skip(skip * PageSize); _TotalPages = CalculateTotalPagesFromTotalItems(); return query.Take(PageSize); } The IEnumerable<T> version simply converts the IEnumerable to an IQuerable and calls back into this method for filtering. The DataTable version requires a little more work to manually parse and filter records (I didn’t want to add the Linq DataSetExtensions assembly just for this): /// <summary> /// Filters a data table for an ActivePage. /// /// Note: Modifies the data set permanently by remove DataRows /// </summary> /// <param name="dt">Full result DataTable</param> /// <param name="activePage">Page to display. 0 to use ActivePage property </param> /// <returns></returns> public DataTable FilterDataTable(DataTable dt, int activePage) { ActivePage = activePage < 1 ? ActivePage : activePage; if (ActivePage < 1) ActivePage = 1; TotalItems = dt.Rows.Count; if (TotalItems <= PageSize) { ActivePage = 1; TotalPages = 1; return dt; } int skip = ActivePage - 1; if (skip > 0) { for (int i = 0; i < skip * PageSize; i++ ) dt.Rows.RemoveAt(0); } while(dt.Rows.Count > PageSize) dt.Rows.RemoveAt(PageSize); return dt; } Using the Pager Control The pager as it is is a first cut I built a couple of weeks ago and since then have been tweaking a little as part of an internal project I’m working on. I’ve replaced a bunch of pagers on various older pages with this pager without any issues and have what now feels like a more consistent user interface where paging looks and feels the same across different controls. As a bonus I’m only loading the data from the database that I need to display a single page. With the preset class tags applied too adding a pager is now as easy as dropping the control and adding the style sheet for styling to be consistent – no fuss, no muss. Schweet. Hopefully some of you may find this as useful as I have or at least as a baseline to build ontop of… Resources The Pager is part of the West Wind Web & Ajax Toolkit Pager.cs Source Code (some toolkit dependencies) Westwind.css base stylesheet with .pager and .gridpager styles Pager Example Page © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET

Read the article

SOA PARTNER COMMUNITY NEWSLETTER JULY 2012

- by mseika

SOA PARTNER COMMUNITY NEWSLETTER JULY 2012 Dear SOA partner community member To provide our community members the best of our knowledge, we want your feedback on our SOA Partner community. Thus we are organizing SOA Partner Community Survey 2012. We request you to participate in the survey and give your valuable feedback on various areas of marketing, sales and education. To continue our successful BPM Suite, Oracle is launching together with you Process Accelerators initiative. It’s your opportunity to co-develop and market predefined processes. Oracle Fusion Applications Design Patterns are a great tool to develop your SOA or BPM solution or process accelerators. To promote your SOA & BPM Specialization we continue to offer several benefits. This month we would like to highlight our Specialization Plaques - make sure you request one for your office! Our Fusion Middleware Summer Camps are booked out, if could not get a seat you can attend the SOA & BPM track @ Virtual Developer Day: Oracle Fusion Development Oracle demo systems offer´s two new demos: Business Driven Development based on BPM Suite & SOA Lifecycle Management. Jürgen KressOracle SOA & BPM Partner Adoption EMEA NEW CONTENT Community SurveyProcess Accelerators KitPlaques SOA & BPM SpecializedSOA & BPM at Virtual Developer Day News from our Partners & CommunityOverview of SOA Diagnostics in 11.1.1.6 Business driven development(BDD) demo now available! SOA Lifecycle Management Oracle Fusion applications design patterns Updated material by Oracle Connect and Network SOA Blogs SOA on Facebook SOA on LinkedIn SOA on Twitter Mix SOA Forum COMMUNITY SURVEY Like every year we would like to get your feedback in our SOA Partner Community Survey 2012. Make sure that You attend to further develop our community and support our planning! It is key for us to get your feedback to prepare for the next fiscal year. Back to top PROCESS ACCELERATORS KIT Oracle is very interested to co-develop and market with you, our partners, pre-defined processes for BPM Suite.I am very happy to announce a new program called “Oracle BPM Partner Solution Catalog”. This program will provide a one-stop shop for our customers looking for Oracle BPM partner solutions available in the market today.The Oracle BPM Solution Catalog will be hosted on our very popular Oracle Technology Network (OTN). To give you an idea of the scale of customer visibility, OTN today receives over 1Million hits per day from our business and developer community. We would like to invite you to list your Oracle BPM 11g solutions available today.In order to participate in this program, you need to do the following: Fill in the attached slide templates - #3 and #4 for each Oracle BPM 11g solution you would like to list on OTN.Please add links to whitepapers , videos, references to the specific solution in the template slide. We recommend that you create a landing page on your website for these linked artifacts and just point to the same from within the PowerPoint template. This will give you the flexibility to update the information as frequently as needed. If you have the particular solution in production or a reference available, please list them as well. Send the PowerPoint template slides (1 set of slides for each Oracle BPM solution) to [email protected]. In addition to having the opportunity to list your solutions on OTN for Oracle customers, you will have the chance to advertise your new wins/implementations/solutions in an Oracle Sponsored PM Webinar held every quarter. This program is targeted to go live by the end of summer 2012. At this point, we are targeting a soft launch in July end 2012 so send on your BPM solutions information as soon as possible. We would love to have your solution(s) listed in the “Oracle BPM Partner Solution Catalog” at the time of the launch. This will be a live repository so you can keep adding more solutions as they become available. If you have any questions, please feel free to contact us [email protected], Product Strategy Director, Oracle BPM , Phone +1 650.506.5486.Thank you and look forward to hearing from you. Oracle BPM team Process Accelerators Overview.pdf ProcessAcceleratorsDataSheet.pdf Demos draUPK.zip & trmUPK.zip BPM Solution repository slides.ppt Additional BPM material BPM Process Development Lifecycle Document that describes recommended approach to collaborative process modeling across business and IT tools ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization) by Andrejus Baranovskis BPMN process editor problems in 11.1.1.6 by Mark Nelson BPM – Disable DBMS job to refresh B2B Materialized View by Mark Nelson For the complete kit please visit the BPM folder at our SOA Community Workspace (SOA Community membership required). For the complete presentation please visit our SOA Community Workspace (SOA Community membership required). Information is Oracle and Partner confidential! Back to top PLAQUES SOA & BPM SPECIALIZED We continue to offer you a nice SOA & BPM Specialization plaque with your logo to proof your success. If you are a SOA or BPM Specialized partner and would like to request the plaque please send Brigitte an e-mail with the following information: Partner Name Partner logo (preferred eps file) Partner Status gold or platinum Your shipping address Your Specialization: SOA or BPM We recommend to mount the plaque at your office reception in addition you can use the SOA Specialization logos at your website download Logo: Gold & Platinum or the BPM logos Gold & Platinum Back to top SOA & BPM AT VIRTUAL DEVELOPER DAY Register now for this FREE hands-on online workshop Get up to date and learn everything you wanted to know about Oracle ADF & Fusion Development plus live Q&A chats with Oracle technical staffOracle Application Development Framework (ADF) is the standards based, strategic framework for Oracle Fusion Applications and Oracle Fusion Middleware. Oracle ADF’s integration with the Oracle SOA Suite, Oracle WebCenter and Oracle BI creates a complete productive development platform for your custom applications.Join us at this FREE virtual event and learn the latest in Fusion Development including: Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle ADF development with Eclipse Oracle WebCenter Portal and ADF Development Application Lifecycle Management with ADF Building Process Centric Applications with ADF and BPM Oracle Business Intelligence and ADF Integration Live Q&A chats with Oracle technical staff Developer lead, manager or architect - this event has something for everyone. Don’t miss this opportunity.Tuesday, July 10, 2012. 9:00 a.m. PT -1:00 p.m. PT 11:00 a.m. CT - 3:00 p.m. CT 12:00 p.m. ET - 4:00 p.m. ET 1:00 p.m. BRT - 5:00 p.m. BRT Register online now! for this FREE event. Agenda: 09:00 am Opening 09:30 am Keynote: Oracle Fusion Development Track1Introduction to Fusion Development Track2What's New in Fusion Development Track3Fusion Development in the Enterprise 10:00 am Is Oracle ADF Development Faster and Simpler than Oracle Forms, APEX or .Net? Mobile Application Development with ADF Mobile Oracle WebCenter Portal and ADF Development 11:00 am Rich Web UI made simple - an ADF Faces Overview Oracle Enterprise Pack for Eclipse - ADF Development Building Process Centric Applications with ADF and BPM 12:00 noon Next Generation Controller for JSF Application Lifecycle Management for ADF Oracle Business Intelligence and ADF Integration *Hands On Lab – WebCenter and ADF Lab w/ JDeveloper - Lab materials will be provided ahead of the event to give you ample time to work through the lab and increase the productivity of the live chat sessions the day of the event. Sessions abstractsRegister online now! for this FREE event Read more on Community Events and post your comment here. Back to top NEWS FROM OUR PARTNERS AND COMMUNITY Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity JDeveloper & ADF?Troubleshooting BPMN process editor problems in 11.1.1.6http://dlvr.it/1p0FfS SOA Community?SOA & BPM @ Virtual Developer Day: Oracle Fusion Development - July 10th 2012https://soacommunity.wordpress.com/2012/07/02/soa-bpm-virtual-developer-day- oracle-fusion-developmentjuly-10th-2012/#soacommunity #soa #bom #education orclateamsoa ?A-Team Blog #ateam: BAM design pointers - In working recently with a large Oracle customer on SOA and BAM, I discove.http://ow.ly/1kYqES SOA CommunitySOA Community Newsletter June 2012http://wp.me/p10C8u-qw SOA CommunityBPMN process editor problems in 11.1.1.6 by Mark Nelsonhttp://redstack.wordpress.com/2012/06/27/ bpmn-process-editor-problems-in-11-1-1-6 #soacommunity #bpm OTNArchBeat ?SOA Learning Library: free short, topic-focused training on Oracle SOA & BPM products | @SOACommunity http://pub.vitrue.com/NE1G Andrejus Baranovskis ?ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization)http://fb.me/1coX4r1X1 SOA CommunitySOA Learning Library provides a comprehensive curriculum for the SOA and BPM product suites https://soacommunity.wordpress.com/2012/06/27/soa-learning-library #soacommunity #soa #bpm OTNArchBeat ?A Universal JMX Client for Weblogic - Part 1: Monitoring BPEL Thread Pools in SOA 11g | Stefan Koserhttp://pub.vitrue.com/mQVZ OTNArchBeat ?BPM - Disable DBMS job to refresh B2B Materialized View | Mark Nelson http://pub.vitrue.com/3PR0Oracle SOA ?Learn how Choice Hotels Implements Innovative Google Maps Solution with #OracleSOA http://bit.ly/MTwIJ3 SOA Communitytop Tweets SOA Partner Community - June 2012 Send your tweets @soacommunity #soacommunity https://soacommunity.wordpress.com/2012/06/25/top-tweets-soa-partner-community-june-2012 Torsten Winterberg#OPITZ is pushing Oracle commitment to the next level: New Specializations done: ADF, BPM, WLS, Exadatahttp://bit.ly/KX1WVS ServiceTechSymposium ?Only 8 more days left until Super Early Bird Registration Discount expires! http://www.servicetechsymposium.com OracleBlogsSOA Management in 3 minutes - Video explainerhttp://ow.ly/1kN5pn SOA Community ?SOA, Cloud & Service Technology Symposium 2012 London - Enter Promo Code: Djmxz370https://soacommunity.wordpress.com/2012/06/22/soa-cloud-service-technology-symposium-2012-london #soasymposium #soacommunity #soa Heidi BuelowGreat course! w David Read RT @soacommunity: product management ADF for BPM training 5 seats left https://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity SOA Community ?product management ADF for BPM training 5 seats lefthttps://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity OTNArchBeat ?Oacle Fusion Applications Design Patterns Now Available For Developers | Ultan O'Broinhttp://pub.vitrue.com/UEiF OTNArchBeat ?SOA, Cloud & Service Technology Symposium 2012London - Special Oracle Discounthttp://pub.vitrue.com/8E0J SOA CommunityBecome a facebook fan of soacommunity http://www.facebook.com/soacommunity #soacommunity SOA Community ?SOA Suite HealthCare Integration Architecture https://blogs.oracle.com/SOAForHealthcare/entry/soa_suite_healthcare_integration_architecture #soacommunity #soa Andrejus Baranovskis ?Running Pre-built Virtual Machine for SOA Suite and BPM Suite 11g PS5 on Mac OS X Snow Leopard (10.6http://fb.me/vB8nO0Vg OracleBlogsPrinciples of Service-Oriented Architecture by Douwe P. van den Bos http://ow.ly/1kIcOP OTNArchBeatOracle Public Cloud Architecture | @TylerJewell http://ow.ly/bHAcL The SOA Network ?Business Process Management, Service-Oriented Architecture, and Web 2.0: Business Transformation or.http://bit.ly/LBgREL #ITNews #SOA OracleBlogs ?Oracle SOA Foundation Practitioner Certificationhttp://ow.ly/1kGYYg Frank Nimphius ?Learn Advanced ADF. ORACLE Fusion Middleware Summer Camps in Lisbon - July 9th - 13thhttp://bit.ly/KGCl3i SOA CommunityTransform Your Application Integration with Best Practices from Oracle Customershttps://blogs.oracle.com/SOA/entry/transform_your_application_integration_with #soacommunity #soa #bpm Simone GeibWhat you always wanted to know about #oraclesoa diagnostics: Shawn Bailey, Overview of SOA Diagnostics in 11.1.1.6,http://ow.ly/bxK0M Oracle SOA ?Save the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to #oraclesoa http://bit.ly/LsNDGl OTNArchBeat ?New VirtualBox images for Oracle SOA Suite & Oracle BPM Suite 11.1.1.6.0http://ow.ly/bwDAl OracleBlogs ?Process development lifecycle in Oracle BPM 11g http://ow.ly/1ktesY Daniel AmadeiNew post: Oracle BPEL 11g Message Delivery & Recovery.http://amadei.com.br/blog/index.php /oracle-bpel-11g-message-delivery SOA Community ?Sending out the June edition of the #soacommunity newsletter - read it or become a member http://www.oracle.com/goto/emea/soa!#soa #bpm Arun Pareek ?For the past six months Ahmed Aboulnaga and me have been working on Oracle SOA Suite 11g Administrator's Handbook.http://lnkd.in/CAvpUQ SOA CommunitySun shine all day no clouds - solar eclipse is over... #sunshine #cloud http://www.infoq.com/presentations/Swarm-Computing Michel SchildmeijerWatch my blog Oracle Service Bus 11g: listing projects and services with WLST - part 1 http://lnkd.in/B7f3GQ @TITAN_GS @wlscommunity OTNArchBeatBook Review: Oracle Application Integration Architecture (AIA) Foundation Pack 11gR1: Essentials | Rajesh Rahejahttp://ow.ly/bn2cc OTNArchBeat ?Driving from Business Architecture to Business Process Services | @vghariharan http://ow.ly/bn5UB OTNArchBeat ?SOA Analysis within the Department of Defense Architecture Framework (DoDAF) 2.0 - Part II | Dawit Lessanu http://ow.ly/bn6sX Simone Geib ?Contact me directly for ideas how to improvehttp://bit.ly/advancedsoasuite and additional posts, presentations, white papers, ... #soasuite Simone Geib ?#soasuite advanced OTN page has become too cluttered. Broke it into separate pages to start with. http://bit.ly/advancedsoasuite OracleBlogs ?June Webcast: SOA Gateway Implementation and Troubleshooting (2 sessions) http://ow.ly/1kbRFA ServiceTechSymposium ?New session just posted to calendar: "NoSQL for Data Services, Data Virtualization & Big Data" by Guido Schmutz, Trivadis AG ://ow.ly/bjjOeDebra Lilley ?looks good - real proof people are using the apps ! RT @fteter: Very cool Fusion Applications Help site: http://bit.ly/L3nvOR #FusionApps demed ?rapid proliferation of cloud computing will drive convergence of SOA and cloud paradigms" http://ovum.com/2012/05/18/soa-paves-the-way-for-cloud/ SOA CommunityMiddleware Oracle Excellence Awards 2012-HAPPY NEW YEAR! https://soacommunity.wordpress.com/2012/05/31/middleware-oracle-excellence-awards-2012happy-new-year/ #soacommunity #opn #opnaward #specialization #oracle SOA CommunityHappy New Year #soacommunity thanks for the business! Time for a drink http://pic.twitter.com/zkK08KWB OTNArchBeat ?Who should ‘own’ the Enterprise Architecture? | Michael Glas http://bit.ly/K0ge0Q SOA Communitytop Tweets SOA Partner Community – May 2012 http://wp.me/p10C8u-pP ServiceTechSymposiumNew session just posted to Symposium calendar: "Elastic SOA in the Cloud" by Steve Millidge, C2B2 Consulting http://www.servicetechsymposium.com/agenda2012.php #elastic_soa_in_the_cloud orclateamsoa ?A-Team Blog #ateam: How to Set JVM Parameters in Oracle SOA 11Ghttp://ow.ly/1k2cnl ServiceTechSymposium ?New session just posted to Symposium calendar: "SOA Governance at EDP: A Global Energy Company" by Manuel Rosa, Linkhttp://www.servicetechsymposium.com/agenda2012.php#soa_governance_at_edp SOA Community ?VirtualBox image SOA Suite & BPM Suite 11.1.1.6.0–Your feedback?http://wp.me/p10C8u-qh Oracle MiddlewareSave the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to#oraclesoa http://bit.ly/LU1y5N OTNArchBeat ?Goodbye, Silos. Hello SOA. | @stephanieoverbyhttp://pub.vitrue.com/NJJO SOA CommunityBPM Standard Edition - to start your BPM project http://wp.me/p10C8u-qj Please feel free to send us your news! And add your blog to our SOA blog wiki. Back to top OVERVIEW OF SOA DIAGNOSTICS IN 11.1.1.6 What tools are available for diagnosing SOA Suite issues? There are a variety of tools available to help you and Support diagnose SOA Suite issues in 11g but it can be confusing as to which tool is appropriate for a particular situation and what their relationships are. This blog post will introduce the various tools and attempt to clarify what each is for and how they are related. Let's first list the tools we'll be addressing: RDA: Remote Diagnostic Agent DFW: Diagnostic Framework Selective Tracing DMS: Dynamic Monitoring Service ODL: Oracle Diagnostic Logging ADR: Automatic Diagnostics Repository ADRCI: Automatic Diagnostics Repository Command Interpreter WLDF: WebLogic Diagnostic Framework This overview is not mean to be a comprehensive guide on using all of these tools, however, extensive reference materials are included that will provide many more details on their execution. Another point to note is that all of these tools are applicable for Fusion Middleware as a whole but specific products may or may not have implemented features to leverage them. A couple of the tools have a WebLogic Scripting Tool or 'WLST' interface. WLST is a command interface for executing pre-built functions and custom scripts against a domain. A detailed WLST tutorial is beyond the scope of this post but you can find general information here. There are more specific resources in the below sections.In this post when we refer to 'Enterprise Manager' or 'EM' we are referring to Enterprise Manager Fusion Middleware Control. read the full blog post here. Read more on Oracle and post your comment here. Back to top BUSINESS DRIVEN DEVELOPMENT (BDD) DEMO NOW AVAILABLE! For access to the Oracle demo systems please visit OPN and talk to your Partner Expert DSS is pleased to announce the availability of the demo “Business Driven Development“. This innovative demonstration uses a case-study approach to show business users how they can easily streamline their Business Processes - delivering greater efficiency, agility, visibility and collaboration with Oracle BPM and WebCenter. The BDD demonstration uses a case study-based approach to highlight a business problem at a fictional company, Avitek Corporation, and uses Oracle BPM and Oracle WebCenter to solve the business problem. This holistic approach has specifically been used to appeal to a non-technical business analyst user. This demo is NOT focused on product features, but aims to guide users through a complete BPM lifecycle. The scenario is based on improving a simple order process (scenario details are in the demo script). Avitek Corporation is sufferinng from a manual email-driven ordering process. Sales reps don’t know where the customer orders are stuck (no visibility) and finance users are unable to manually approve every order (no automation). There are several areas where this process can be improved with Business Process Management technology. This demo shows how improving following areas will ignificantly help resolve the business problems Avitek Corporation is facing. Areas for improvement include: Utilizing BPM for process management, rather than an unregulated, email-based process. Utilizing automated services, rather than requiring a human to key into a system. For example, Finance checking the customer’s credit rating is something that could be automated. Centralizing business rules that can be integrated into a business process, rather than requiring a human to process them. For example, Finance must determine when orders can be automatically approved. Provide insight and visibility into the process. For example, Sales Rep needs to know the status of their customer’s orders. The BDD Demo uses the following products. Oracle BPM Suite 11g PS4FP Oracle WebCenter 11g PS4FP (for Process Spaces) Oracle Business Activity Monitoring 11g Oracle Database 11g Back to top SOA LIFECYCLE MANAGEMENT For access to the Oracle demo systems please visit OPN and talk to your Partner Expert We are pleased to announce the availability of the SOA Management demo that showcases some of the key provisioning and lifecycle management capabilities of SOA Management Pack Enterprise Edition (EE). This demo specifically focuses on some of the lifecycle management solutions for Oracle SOA Suite and Oracle Service Bus (OSB). Demo Highlights The demo showcases the following capabilities. Provisioning of SOA Composites Provisioning of OSB Projects Provision SOA and OSB artifacts in a future maintenance window Back to top ORACLE FUSION APPLICATIONS DESIGN PATTERNS The Oracle Fusion Applications user experience design patterns are published! These new, reusable usability solutions and best-practices, which will join the Oracle dashboard patterns and guidelines that are already available online, are used by Oracle to artfully bring to life a new standard in the user experience, or UX, of enterprise applications. Now, the Oracle applications development community can benefit from the science behind the Oracle Fusion Applications user experience, too. These Oracle Fusion Applications UX Design Patterns, or blueprints, enable Oracle applications developers and system implementers everywhere to leverage professional usability insight when: tailoring an Oracle Fusion application, creating coexistence solutions that existing users will be delighted with, thus enabling graceful user transitions to Oracle Fusion Applications down the road, or designing exciting, new, highly usable applications in the cloud or on-premise. Based on the Oracle Application Development Framework (ADF) components, the Oracle Fusion Applications patterns and guidelines are proven with real users and in the Applications UX usability labs, so you can get right to work coding productivity-enhancing designs that provide an advantage for your entire business. What’s the best way to get started? We’ve made that easy, too. The Design Filter Tool (DeFT) selects the best pattern for your user type and task. Simply adapt your selection for your own task flow and content, and you’re on your way to a really great applications user experience. More Oracle applications design patterns and training are coming your way in the future. To provide feedback on the sets that are currently available, let me know in the comments! Read more on Fusionapps and post your comment here. Back to top UPDATED ORACLE MATERIAL Integrated SOA Gateway Documentation - Implementation Guide | Developer’s Guide Webcast Series: Oracle’s SOA and Oracle Business Process Management Solutions (Choice Hotels, Eaton, Farmers Insurance) BAM design pointers By Kavitha Srinivasan Seeking Oracle Fusion Middleware Go Live StoriesOracle Fusion Middleware product management is looking for recent go live stories to share with the Oracle sales team, sales consulting, product management and other internal groups. Customer contact details may remain anonymous. Your successful implementation will be featured in a quarterly report. The chance to present on an internal webcast is also available. Contact Maria Forney ([email protected]) if you have a noteworthy implementation success story. This is a good opportunity for partners interested in showcasing Oracle Fusion Middleware implementations, and gaining more exposure within Oracle. Performance tuning resources. All in one: docs, blogs, WPs, ppts: http://bit.ly/soa_resources Back to top HAVE YOU MISSED OUR LAST SOA PARTNER COMMUNITY WEBCASTS? UPK Webcast Business Driven Application Management & BPM11g & Application Grid & GoldenGate & Fusion Middleware Pricing & OC4J to WebLogic & Next Generation SOA & Fusion Middleware in Utility & Fusion Middleware in Communications & Fusion Middleware in Public Services & Fusion Middleware in Financial Services Please check your local OPN trainings calendar for additional training dates and locations. Back to top SOA PARTNER COMMUNITY CALENDAR On-Demand Trainings Event Name Language Type SOA Virtual Developers Day English Tech In-Class Trainings Date Event name Location / Country Contact person Type 09-13.07.2012 BPM Suite 11g advanced training by David Read Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 ADF 11g advanced training by Grant Ronald and Frank Nimphius Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 WebCenter Portal advanced training by Stefan Krantz and Angelo Santagata Lisbon, Portugal Jürgen Kress Tech 10.07.2012 Fusion Middleware Virtual Developer Day Online OTN Tech 10- 12.07.2012 WebLogic 12c training by Cosmin Tudor Lisbon, Portugal Jürgen Kress Tech 16-18.07.2012 SOA Suite 11g advanced training by Niall Commiskey Munich, Germany Jürgen Kress Tech 16-18.07.2012 ADF for BPM Suite 11g advanced training by David Read Munich, Germany Jürgen Kress Tech 16-18.07.2012 WebCenter Sites 11g advanced training by Product Management Munich, Germany Jürgen Kress Tech 17-20.07.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 23-26.07.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 29-31.08.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 02-05.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 28-30.11.2012 Oracle AIA 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 11-14.12.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 20-22.2.2013 Oracle AIA 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 14-17.1.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.3.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech Please check your local OPN Training Calendar for additional training and locations here. Back to top SOASCHOOL.COM - SOA CERTIFIED PROFESSIONAL(SOACP) PROGRAM The SOASchool.com - SOA Certified Professional (SOACP) program is dedicated to excellence in the field of SOA and service-oriented computing. Through a series of seasoned course modules and exams, IT professionals have the opportunity to obtain a number of different certifications to recognize their accomplishment of gaining "project ready" SOA proficiency. This comprehensive and strictly vendor-neutral program was developed in cooperation with best-selling SOA author Thomas Erl and several major SOA organizations and academic institutions. Through the involvement of the SOA Education Committee, course contents and certification requirements are constantly reviewed and revised to stay current with developments in the service-oriented computing industry. The program is currently comprised of 12 course modules and 5 certifications and is expanding to 18 course modules and 8 certifications throughout 2009. For more information, visit www.soaschool.com and www.soacp.com. Blog Twitter LinkedIn Mix Forum Wiki Back to top YOUR CONTENT ON THE NEWSLETTER AND ON THE SOA COMMUNITY PORTAL Publishing Your StoriesWe would like to invite our partners to publish information in the newsletter or on our SOA Community portal. Especially we are looking for your real life experience with our SOA technology. Please send your documents to Jürgen Kress. We look forward to getting your suggestions! Back to top SOA DISCUSSION FORUM BECOMES INTERACTIVE AT THE SOA COMMUNITY! Do you want to chat to experts, including partners and Oracle SOA Product Development? Do you want to get the latest information about our SOA solutions and events?Attend our private online SOA Discussion Forum at OTN. Please send your OTN forums user name to Brigitte Felisaz. You must be a registered user to access the SOA Discussion Forum. Back to top INVITE YOUR COLLEAGUES TO JOIN THE SOA COMMUNITY Please feel free to invite your colleagues to join the SOA Community and to participate in the SOA Assessment tests. For registration please login the Oracle PartnerNetwork and go to: www.oracle.com/goto/emea/soa For any questions on the above or concerning SOA and Oracle in general please contact the Oracle EMEA Alliances & Channels SOA Team. Best regardsOracle EMEA SOA TeamJürgen Kress Jürgen KressSOA Partner Adoption EMEATel. +49 89 1430 1479E-Mail: [email protected]

Read the article

Rendering a WPF Network Map/Graph layout - Manual? PathListBox? Something Else?

- by Ben Von Handorf

I'm writing code to present the user with a simplified network map. At any given time, the map is focused on a specific item... say a router or a server. Based on the focused item, other network entities are grouped into sets (i.e. subnets or domains) and then rendered around the focused item. Lines would represent connections and groups would be visually grouped inside a rectangle or ellipse. Panning and zooming are required features. An item can be selected to display more information in a "properties" style window. An item could also be double-clicked to re-focus the entire network map on that item. At that point, the entire map would be re-calculated. I am using MVVM without any framework, as of yet. Assume the logic for grouping items and determining what should be shown or not is all in place. I'm looking for the best way to approach the UI layout. So far, I'm aware of the following options: Use a canvas for layout (inside a ScrollViewer to handle the panning). Have my ViewModel make use of a Layout Manager type of class, which would handle assigning all the layout properties (Top, Left, etc.). Bind my set of display items to an ItemsControl and use Data Templates to handle the actual rendering. The drawbacks with this approach: Highly manual layout on my part. Lots of calculation. I have to handle item selection manually. Computation of connecting lines is manual. The Pros of this approach: I can draw additional lines between child subnets as appropriate (manually). Additional LayoutManagers could be added later to render the display differently. This could probably be wrapped up into some sort of a GraphLayout control to be re-used. Present the focused item at the center of the display and then use a PathListBox for layout of the additional items. Have my ViewModel expose a simple list of things to be drawn and bind them to the PathListBox. Override the ListBoxItem Template to also create a line geometry from the borders of the focused item (tricky) to the bound item. Use DataTemplates to handle the case where the item being bound is a subnet, in which case we would use another PathListBox in the template to display items inside the subnet. The drawbacks with this approach: Selected Item synchronization across multiple `PathListBox`es. Only one item on the whole graph can be selected at a time, but each child PathListBox maintains its own selection. Also, subnets cannot be selected, but would be selectable without additional work. Drawing the connecting lines is going to be a bit of trickery in the ListBoxItem template, since I need to know the correct side of the focused item to connect to. The pros of this approach: I get to stay out of the layout business, more. I'm looking for any advice or thoughts from others who have encountered similar issues or who have more WPF experience than I. I'm using WPF 4, so any new tricks are legal and encouraged.

Read the article

When Your Boss Doesn't Want you to Succeed

- by Phil Factor

You're working hard to get an application finished. You are programming long into the evenings sometimes, and eating sandwiches at your desk instead of taking a lunch break. Then one day you glance up at the IT manager, serene in his mysterious round of meetings, and think 'Does he actually care whether this project succeeds or not?'. The question may seem absurd. Of course the project must succeed. The truth, as always, is often far more complex. Your manager may even be doing his best to make sure you don't succeed. Why? There have always been rich pickings for the unscrupulous in IT. In extreme cases, where administrators struggle with scarcely-comprehended technical issues, huge sums of money can be lost and gained without any perceptible results. In a very few cases can fraud be proven: most of the time, the intricacies of the 'game' are such that one can do little more than harbor suspicion. Where does over-enthusiastic salesmanship end and fraud begin? The Business of Information Technology provides rich opportunities for White-collar crime. The poor developer has his, or her, hands full with the task of wrestling with the sheer complexity of building an application. He, or she, has no time for following the complexities of the chicanery of the management that is directing affairs. Most likely, the developers wouldn't even suspect that their company management had ulterior motives. I'll illustrate what I mean with an entirely fictional, hypothetical, example. The Opportunist and the Aged Charities often do good, unexciting work that is funded by the income from a bequest that dates back maybe hundreds of years. In our example, it isn't exciting work, for it involves the welfare of elderly people who have fallen on hard times. Volunteers visit, giving a smile and a chat, and check that they are all right, but are able to spend a little money on their discretion to ameliorate any pressing needs for these old folk. The money is made to work very hard and the charity averts a great deal of suffering and eases the burden on the state. Daisy hears the garden gate creak as Mrs Rainer comes up the path. She looks forward to her twice-weekly visit from the nice lady from the trust. She always asked ‘is everything all right, Love’. Cheeky but nice. She likes her cheery manner. She seems interested in hearing her memories, and talking about her far-away family. She helps her with those chores in the house that she couldn’t manage and once even paid to fill the back-shed with coke, the other year. Nice, Mrs. Rainer is, she thought as she goes to open the door. The trustees are getting on in years themselves, and worry about the long-term future of the charity: is it relevant to modern society? Is it likely to attract a new generation of workers to take it on. They are instantly attracted by the arrival to the board of a smartly dressed University lecturer with the ear of the present Government. Alain 'Stalin' Jones is earnest, persuasive and energetic. The trustees welcome him to the board and quickly forgive his humorless political-correctness. He talks of 'diversity', 'relevance', 'social change', 'equality' and 'communities', but his eye is on that huge bequest. Alain first came to notice as a Trotskyite union official, who insinuated himself into one of the duller Trades Unions and turned it, through his passionate leadership, into a radical, headline-grabbing organization. Middle age, and the rise of European federal socialism, had brought him quiet prosperity and charcoal suits, an ear in the current government, and a wide influence as a member of various Quangos (government bodies staffed by well-paid unelected courtiers). He was employed as a 'consultant' by several organizations that relied on government contracts. After gaining the confidence of the trustees, and showing a surprising knowledge of mundane processes and the regulatory framework of charities, Alain launches his plan. The trust will expand their work by means of a bold IT initiative that will coordinate the interventions of several 'caring agencies', and provide emergency cover, a special Website so anxious relatives can see how their elderly charges are doing, and a vastly more efficient way of coordinating the work of the volunteer carers. It will also provide a special-purpose site that gives 'social networking' facilities, rather like Facebook, to the few elderly folk on the lists with access to the internet. The trustees perk up. Their own experience of the internet is restricted to the occasional scanning of railway timetables, but they can see that it is 'relevant'. In his next report to the other trustees, Alain proudly announces that all this glamorous and exciting technology can be paid for by a grant from the government. He admits darkly that he has influence. True to his word, the government promises a grant of a size that is an order of magnitude greater than any budget that the trustees had ever handled. There was the understandable proviso that the company that would actually do the IT work would have to be one of the government's preferred suppliers and the work would need to be tendered under EU competition rules. The only company that tenders, a multinational IT company with a long track record of government work, quotes ten million pounds for the work. A trustee questions the figure as it seems enormous for the reasonably trivial internet facilities being built, but the IT Salesmen dazzle them with presentations and three-letter acronyms until they subside into quiescent acceptance. After all, they can’t stay locked in the Twentieth century practices can they? The work is put in hand with a large project team, in a splendid glass building near west London. The trustees see rooms of programmers working diligently at screens, and who talk with enthusiasm of the project. Paul, the project manager, looked through his resource schedule with growing unease. His initial excitement at being given his first major project hadn’t lasted. He’d been allocated a lackluster team of developers whose skills didn’t seem right, and he was allowed only a couple of contractors to make good the deficit. Strangely, the presentation he’d given to his management, where he’d saved time and resources with a OTS solution to a great deal of the development work, and a sound conservative architecture, hadn’t gone down nearly as big as he’d hoped. He almost got the feeling they wanted a more radical and ambitious solution. The project starts slipping its dates. The costs build rapidly. There are certain uncomfortable extra charges that appear, such as the £600-a-day charge by the 'Business Manager' appointed to act as a point of liaison between the charity and the IT Company. When he appeared, his face permanently split by a 'Mr Sincerity' smile, they'd thought he was provided at the cost of the IT Company. Derek, the DBA, didn’t have to go to the server room quite some much as he did: but It got him away from the poisonous despair of the development group. Wave after wave of events had conspired to delay the project. Why the management had imposed hideous extra bureaucracy to cover ISO 9000 and 9001:2008 accreditation just as the project was struggling to get back on-schedule was beyond belief. Then the Business manager was coming back with endless changes in scope, sorrowing saying that the Trustees were very insistent, though hopelessly out in touch with the reality of technical challenges. Suddenly, the costs mount to the point of consuming the government grant in its entirety. The project remains tantalizingly just out of reach. Alain Jones gives an emotional rallying speech at the trustees review meeting, urging them not to lose their nerve. Sadly, the trustees dip into the accumulated capital of the trust, the seed-corn of all their revenues, in order to save the IT project. A few months later it is all over. The IT project is never delivered, even though it had seemed so incredibly close. With the trust's capital all gone, the activities it funded have to be terminated and the trust becomes just a shell. There aren't even the funds to mount a legal challenge against the IT company, even had the trust's solicitor advised such a foolish thing. Alain leaves as suddenly as he had arrived, only to pop up a few months later, bronzed and rested, at another charity. The IT workers who were permanent employees are dispersed to other projects, and the contractors leave to other contracts. Within months the entire project is but a vague memory. One or two developers remain puzzled that their managers had been so obstructive when they should have welcomed progress toward completion of the project, but they put it down to incompetence and testosterone. Few suspected that they were actively preventing the project from getting finished. The relationships between the IT consultancy, and the government of the day are intricate, and made more complex by the Private Finance initiatives and political patronage. The losers in this case were the taxpayers, and the beneficiaries of the trust, and, perhaps the soul of the original benefactor of the trust, whose bid to give his name some immortality had been scuppered by smooth-talking white-collar political apparatniks. Even now, nobody is certain whether a crime was ever committed. The perfect heist, I guess. Where’s the victim? "I hear that Daisy’s cottage is up for sale. She’s had to go into a care home. She didn’t want to at all, but then there is nobody to keep an eye on her since she had that minor stroke a while back. A charity used to help out. The ‘social’ don’t have the funding, evidently for community care. Yes, her old cat was put down. There was a good clearout, and now the house is all scrubbed and cleared ready for sale. The skip was full of old photos and letters, memories. No room in her new ‘home’."

Read the article

Where to Store the Protection Trial Info for Software Protection Purpose

- by Peter Lee

It might be duplicate with other questions, but I swear that I googled a lot and search at StackOverflow.com a lot, and I cannot find the answer to my question: In a C#.Net application, where to store the protection trial info, such as Expiration Date, Number of Used Times? I understand that, all kinds of Software Protection strategies can be cracked by a sophiscated hacker (because they can almost always get around the expiration checking step). But what I'm now going to do is just to protect it in a reasonable manner that a "common"/"advanced" user cannot screw it up. OK, in order to proof that I have googled and searched a lot at StackOverflow.com, I'm listing all the possible strategies I got: 1. Registry Entry First, some users might not have the access to even read the Registry table. Second, if we put the Protection Trial Info in a Registry Entry, the user can always find it out where it is by comparing the differences before and after the software installation. They can just simply change it. OK, you might say that we should encrypt the Protection Trial Info, yes we can do that. But what if the user just change their system date before installing? OK, you might say that we should also put a last-used date, if something is wrong, the last-used date could work as a protection guide. But what if the user just uninstall the software and delete all Registry Entries related to this software, and then reinstall the software? I have no idea on how to deal with this. Please help. A Plain File First, there are some places to put the plain file: 2.a) a simple XML file under software installation path 2.b) configuration file Again, the user can just uninstall the software and remove these plain file(s), and reinstall the software. - The Software Itself If we put the protection trial info (Expiration Date, we cannot put Number of Used Times) in the software itself, it is still susceptible to the cases I mentioned above. Furthermore, it's not even cool to do so. - A Trial Product-Key It works like a licensing process, that is, we put the Trial info into an RSA-signed string. However, it requires too many steps for a user to have a try of using the software (they might lose patience): 4.a) The user downloads the software; 4.b) The user sends an email to request a Trial Product-Key by providing user name (or email) or hardware info; 4.c) The server receives the request, RSA-signs it and send back to the user; 4.d) The user can now use it under the condition of (Expiration Date & Number of Used Times). Now, the server has a record of the user's username or hardware info, so the user will be rejected to request a second trial. Is it legal to collection hardware info? In a word, the user has to do one more extra step (request a Trial Product Key) just for having a try of using the software, which is not cool (thinking myself as a user). NOTE: This question is not about the Licensing, instead, it's about where to store the TRIAL info. After the trial expires, the user should ask for a license (CD-Key/Product-Key). I'm going to use RSA signature (bound to User Hardware)

Read the article

Adding an Admin user to an ASP.NET MVC 4 application using a single drop-in file

- by Jon Galloway

I'm working on an ASP.NET MVC 4 tutorial and wanted to set it up so just dropping a file in App_Start would create a user named "Owner" and assign them to the "Administrator" role (more explanation at the end if you're interested). There are reasons why this wouldn't fit into most application scenarios: It's not efficient, as it checks for (and creates, if necessary) the user every time the app starts up The username, password, and role name are hardcoded in the app (although they could be pulled from config) Automatically creating an administrative account in code (without user interaction) could lead to obvious security issues if the user isn't informed However, with some modifications it might be more broadly useful - e.g. creating a test user with limited privileges, ensuring a required account isn't accidentally deleted, or - as in my case - setting up an account for demonstration or tutorial purposes. Challenge #1: Running on startup without requiring the user to install or configure anything I wanted to see if this could be done just by having the user drop a file into the App_Start folder and go. No copying code into Global.asax.cs, no installing addition NuGet packages, etc. That may not be the best approach - perhaps a NuGet package with a dependency on WebActivator would be better - but I wanted to see if this was possible and see if it offered the best experience. Fortunately ASP.NET 4 and later provide a PreApplicationStartMethod attribute which allows you to register a method which will run when the application starts up. You drop this attribute in your application and give it two parameters: a method name and the type that contains it. I created a static class named PreApplicationTasks with a static method named, then dropped this attribute in it: [assembly: PreApplicationStartMethod(typeof(PreApplicationTasks), "Initializer")] That's it. One small gotcha: the namespace can be a problem with assembly attributes. I decided my class didn't need a namespace. Challenge #2: Only one PreApplicationStartMethod per assembly In .NET 4, the PreApplicationStartMethod is marked as AllMultiple=false, so you can only have one PreApplicationStartMethod per assembly. This was fixed in .NET 4.5, as noted by Jon Skeet, so you can have as many PreApplicationStartMethods as you want (allowing you to keep your users waiting for the application to start indefinitely!). The WebActivator NuGet package solves the multiple instance problem if you're in .NET 4 - it registers as a PreApplicationStartMethod, then calls any methods you've indicated using [assembly: WebActivator.PreApplicationStartMethod(type, method)]. David Ebbo blogged about that here: Light up your NuGets with startup code and WebActivator. In my scenario (bootstrapping a beginner level tutorial) I decided not to worry about this and stick with PreApplicationStartMethod. Challenge #3: PreApplicationStartMethod kicks in before configuration has been read This is by design, as Phil explains. It allows you to make changes that need to happen very early in the pipeline, well before Application_Start. That's fine in some cases, but it caused me problems when trying to add users, since the Membership Provider configuration hadn't yet been read - I got an exception stating that "Default Membership Provider could not be found." The solution here is to run code that requires configuration in a PostApplicationStart method. But how to do that? Challenge #4: Getting PostApplicationStartMethod without requiring WebActivator The WebActivator NuGet package, among other things, provides a PostApplicationStartMethod attribute. That's generally how I'd recommend running code that needs to happen after Application_Start: [assembly: WebActivator.PostApplicationStartMethod(typeof(TestLibrary.MyStartupCode), "CallMeAfterAppStart")] This works well, but I wanted to see if this would be possible without WebActivator. Hmm. Well, wait a minute - WebActivator works in .NET 4, so clearly it's registering and calling PostApplicationStartup tasks somehow. Off to the source code! Sure enough, there's even a handy comment in ActivationManager.cs which shows where PostApplicationStartup tasks are being registered: public static void Run() { if (!_hasInited) { RunPreStartMethods(); // Register our module to handle any Post Start methods. But outside of ASP.NET, just run them now if (HostingEnvironment.IsHosted) { Microsoft.Web.Infrastructure.DynamicModuleHelper.DynamicModuleUtility.RegisterModule(typeof(StartMethodCallingModule)); } else { RunPostStartMethods(); } _hasInited = true; } } Excellent. Hey, that DynamicModuleUtility seems familiar... Sure enough, K. Scott Allen mentioned it on his blog last year. This is really slick - a PreApplicationStartMethod can register a new HttpModule in code. Modules are run right after application startup, so that's a perfect time to do any startup stuff that requires configuration to be read. As K. Scott says, it's this easy: using System; using System.Web; using Microsoft.Web.Infrastructure.DynamicModuleHelper; [assembly:PreApplicationStartMethod(typeof(MyAppStart), "Start")] public class CoolModule : IHttpModule { // implementation not important // imagine something cool here } public static class MyAppStart { public static void Start() { DynamicModuleUtility.RegisterModule(typeof(CoolModule)); } } Challenge #5: Cooperating with SimpleMembership The ASP.NET MVC Internet template includes SimpleMembership. SimpleMembership is a big improvement over traditional ASP.NET Membership. For one thing, rather than forcing a database schema, it can work with your database schema. In the MVC 4 Internet template case, it uses Entity Framework Code First to define the user model. SimpleMembership bootstrap includes a call to InitializeDatabaseConnection, and I want to play nice with that. There's a new [InitializeSimpleMembership] attribute on the AccountController, which calls \Filters\InitializeSimpleMembershipAttribute.cs::OnActionExecuting(). That comment in that method that says "Ensure ASP.NET Simple Membership is initialized only once per app start" which sounds like good advice. I figured the best thing would be to call that directly: new Mvc4SampleApplication.Filters.InitializeSimpleMembershipAttribute().OnActionExecuting(null); I'm not 100% happy with this - in fact, it's my least favorite part of this solution. There are two problems - first, directly calling a method on a filter, while legal, seems odd. Worse, though, the Filter lives in the application's namespace, which means that this code no longer works well as a generic drop-in. The simplest workaround would be to duplicate the relevant SimpleMembership initialization code into my startup code, but I'd rather not. I'm interested in your suggestions here. Challenge #6: Module Init methods are called more than once When debugging, I noticed (and remembered) that the Init method may be called more than once per page request - it's run once per instance in the app pool, and an individual page request can cause multiple resource requests to the server. While SimpleMembership does have internal checks to prevent duplicate user or role entries, I'd rather not cause or handle those exceptions. So here's the standard single-use lock in the Module's init method: void IHttpModule.Init(HttpApplication context) { lock (lockObject) { if (!initialized) { //Do stuff } initialized = true; } } Putting it all together With all of that out of the way, here's the code I came up with: using Mvc4SampleApplication.Filters; using System.Web; using System.Web.Security; using WebMatrix.WebData; [assembly: PreApplicationStartMethod(typeof(PreApplicationTasks), "Initializer")] public static class PreApplicationTasks { public static void Initializer() { Microsoft.Web.Infrastructure.DynamicModuleHelper.DynamicModuleUtility .RegisterModule(typeof(UserInitializationModule)); } } public class UserInitializationModule : IHttpModule { private static bool initialized; private static object lockObject = new object(); private const string _username = "Owner"; private const string _password = "p@ssword123"; private const string _role = "Administrator"; void IHttpModule.Init(HttpApplication context) { lock (lockObject) { if (!initialized) { new InitializeSimpleMembershipAttribute().OnActionExecuting(null); if (!WebSecurity.UserExists(_username)) WebSecurity.CreateUserAndAccount(_username, _password); if (!Roles.RoleExists(_role)) Roles.CreateRole(_role); if (!Roles.IsUserInRole(_username, _role)) Roles.AddUserToRole(_username, _role); } initialized = true; } } void IHttpModule.Dispose() { } } The Verdict: Is this a good thing? Maybe. I think you'll agree that the journey was undoubtedly worthwhile, as it took us through some of the finer points of hooking into application startup, integrating with membership, and understanding why the WebActivator NuGet package is so useful Will I use this in the tutorial? I'm leaning towards no - I think a NuGet package with a dependency on WebActivator might work better: It's a little more clear what's going on Installing a NuGet package might be a little less error prone than copying a file A novice user could uninstall the package when complete It's a good introduction to NuGet, which is a good thing for beginners to see This code either requires either duplicating a little code from that filter or modifying the file to use the namespace Honestly I'm undecided at this point, but I'm glad that I can weigh the options. If you're interested: Why are you doing this? I'm updating the MVC Music Store tutorial to ASP.NET MVC 4, taking advantage of a lot of new ASP.NET MVC 4 features and trying to simplify areas that are giving people trouble. One change that addresses both needs us using the new OAuth support for membership as much as possible - it's a great new feature from an application perspective, and we get a fair amount of beginners struggling with setting up membership on a variety of database and development setups, which is a distraction from the focus of the tutorial - learning ASP.NET MVC. Side note: Thanks to some great help from Rick Anderson, we had a draft of the tutorial that was looking pretty good earlier this summer, but there were enough changes in ASP.NET MVC 4 all the way up to RTM that there's still some work to be done. It's high priority and should be out very soon. The one issue I ran into with OAuth is that we still need an Administrative user who can edit the store's inventory. I thought about a number of solutions for that - making the first user to register the admin, or the first user to use the username "Administrator" is assigned to the Administrator role - but they both ended up requiring extra code; also, I worried that people would use that code without understanding it or thinking about whether it was a good fit.

Read the article

How to use pthread_atfork() and pthread_once() to reinitialize mutexes in child processes

- by Blair Zajac

We have a C++ shared library that uses ZeroC's Ice library for RPC and unless we shut down Ice's runtime, we've observed child processes hanging on random mutexes. The Ice runtime starts threads, has many internal mutexes and keeps open file descriptors to servers. Additionally, we have a few of mutexes of our own to protect our internal state. Our shared library is used by hundreds of internal applications so we don't have control over when the process calls fork(), so we need a way to safely shutdown Ice and lock our mutexes while the process forks. Reading the POSIX standard on pthread_atfork() on handling mutexes and internal state: Alternatively, some libraries might have been able to supply just a child routine that reinitializes the mutexes in the library and all associated states to some known value (for example, what it was when the image was originally executed). This approach is not possible, though, because implementations are allowed to fail *_init() and *_destroy() calls for mutexes and locks if the mutex or lock is still locked. In this case, the child routine is not able to reinitialize the mutexes and locks. On Linux, the this test C program returns EPERM from pthread_mutex_unlock() in the child pthread_atfork() handler. Linux requires adding _NP to the PTHREAD_MUTEX_ERRORCHECK macro for it to compile. This program is linked from this good thread. Given that it's technically not safe or legal to unlock or destroy a mutex in the child, I'm thinking it's better to have pointers to mutexes and then have the child make new pthread_mutex_t on the heap and leave the parent's mutexes alone, thereby having a small memory leak. The only issue is how to reinitialize the state of the library and I'm thinking of reseting a pthread_once_t. Maybe because POSIX has an initializer for pthread_once_t that it can be reset to its initial state. #include <pthread.h> #include <stdlib.h> #include <string.h> static pthread_once_t once_control = PTHREAD_ONCE_INIT; static pthread_mutex_t *mutex_ptr = 0; static void setup_new_mutex() { mutex_ptr = malloc(sizeof(*mutex_ptr)); pthread_mutex_init(mutex_ptr, 0); } static void prepare() { pthread_mutex_lock(mutex_ptr); } static void parent() { pthread_mutex_unlock(mutex_ptr); } static void child() { // Reset the once control. pthread_once_t once = PTHREAD_ONCE_INIT; memcpy(&once_control, &once, sizeof(once_control)); setup_new_mutex(); } static void init() { setup_new_mutex(); pthread_atfork(&prepare, &parent, &child); } int my_library_call(int arg) { pthread_once(&once_control, &init); pthread_mutex_lock(mutex_ptr); // Do something here that requires the lock. int result = 2*arg; pthread_mutex_unlock(mutex_ptr); return result; } In the above sample in the child() I only reset the pthread_once_t by making a copy of a fresh pthread_once_t initialized with PTHREAD_ONCE_INIT. A new pthread_mutex_t is only created when the library function is invoked in the child process. This is hacky but maybe the best way of dealing with this skirting the standards. If the pthread_once_t contains a mutex then the system must have a way of initializing it from its PTHREAD_ONCE_INIT state. If it contains a pointer to a mutex allocated on the heap than it'll be forced to allocate a new one and set the address in the pthread_once_t. I'm hoping it doesn't use the address of the pthread_once_t for anything special which would defeat this. Searching comp.programming.threads group for pthread_atfork() shows a lot of good discussion and how little the POSIX standards really provides to solve this problem. There's also the issue that one should only call async-signal-safe functions from pthread_atfork() handlers, and it appears the most important one is the child handler, where only a memcpy() is done. Does this work? Is there a better way of dealing with the requirements of our shared library?

Search Results

Search found 11985 results on 480 pages for 'legal issues'.

Page 372/480 | < Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379 | Next Page >

- by TomTom

- by Gnoupi

- by field_guy

- by VirtualNoob

- by xdumaine

- by Magsol

- by Chadd Nervig

- by John Doe

- by Brendan Vogt

- by John Doe

- by Jason Kealey

- by Chris

- by Fernando Miguélez

- by BlackMael

- by Joshua Grippo

- by MOKANA

- by Oscar

- by user955664

- by Rick Strahl

- by mseika

- by Ben Von Handorf

- by Phil Factor

- by Peter Lee

- by Jon Galloway

- by Blair Zajac

< Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379 | Next Page >