Search Results

Search found 10695 results on 428 pages for 'some none'.

Page 372/428 | < Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379  | Next Page >

• Auto DOP and Concurrency

  - by jean-pierre.dijcks

  After spending some time in the cloud, I figured it is time to come down to earth and start discussing some of the new Auto DOP features some more. As Database Machines (the v2 machine runs Oracle Database 11.2) are effectively selling like hotcakes, it makes some sense to talk about the new parallel features in more detail. For basic understanding make sure you have read the initial post. The focus there is on Auto DOP and queuing, which is to some extend the focus here. But now I want to discuss the concurrency a little and explain some of the relevant parameters and their impact, specifically in a situation with concurrency on the system. The goal of Auto DOP The idea behind calculating the Automatic Degree of Parallelism is to find the highest possible DOP (ideal DOP) that still scales. In other words, if we were to increase the DOP even more  above a certain DOP we would see a tailing off of the performance curve and the resource cost / performance would become less optimal. Therefore the ideal DOP is the best resource/performance point for that statement. The goal of Queuing On a normal production system we should see statements running concurrently. On a Database Machine we typically see high concurrency rates, so we need to find a way to deal with both high DOP’s and high concurrency. Queuing is intended to make sure we Don’t throttle down a DOP because other statements are running on the system Stay within the physical limits of a system’s processing power Instead of making statements go at a lower DOP we queue them to make sure they will get all the resources they want to run efficiently without trashing the system. The theory – and hopefully – practice is that by giving a statement the optimal DOP the sum of all statements runs faster with queuing than without queuing. Increasing the Number of Potential Parallel Statements To determine how many statements we will consider running in parallel a single parameter should be looked at. That parameter is called PARALLEL_MIN_TIME_THRESHOLD. The default value is set to 10 seconds. So far there is nothing new here…, but do realize that anything serial (e.g. that stays under the threshold) goes straight into processing as is not considered in the rest of this post. Now, if you have a system where you have two groups of queries, serial short running and potentially parallel long running ones, you may want to worry only about the long running ones with this parallel statement threshold. As an example, lets assume the short running stuff runs on average between 1 and 15 seconds in serial (and the business is quite happy with that). The long running stuff is in the realm of 1 – 5 minutes. It might be a good choice to set the threshold to somewhere north of 30 seconds. That way the short running queries all run serial as they do today (if it ain’t broken, don’t fix it) and allows the long running ones to be evaluated for (higher degrees of) parallelism. This makes sense because the longer running ones are (at least in theory) more interesting to unleash a parallel processing model on and the benefits of running these in parallel are much more significant (again, that is mostly the case). Setting a Maximum DOP for a Statement Now that you know how to control how many of your statements are considered to run in parallel, lets talk about the specific degree of any given statement that will be evaluated. As the initial post describes this is controlled by PARALLEL_DEGREE_LIMIT. This parameter controls the degree on the entire cluster and by default it is CPU (meaning it equals Default DOP). For the sake of an example, let’s say our Default DOP is 32. Looking at our 5 minute queries from the previous paragraph, the limit to 32 means that none of the statements that are evaluated for Auto DOP ever runs at more than DOP of 32. Concurrently Running a High DOP A basic assumption about running high DOP statements at high concurrency is that you at some point in time (and this is true on any parallel processing platform!) will run into a resource limitation. And yes, you can then buy more hardware (e.g. expand the Database Machine in Oracle’s case), but that is not the point of this post… The goal is to find a balance between the highest possible DOP for each statement and the number of statements running concurrently, but with an emphasis on running each statement at that highest efficiency DOP. The PARALLEL_SERVER_TARGET parameter is the all important concurrency slider here. Setting this parameter to a higher number means more statements get to run at their maximum parallel degree before queuing kicks in.  PARALLEL_SERVER_TARGET is set per instance (so needs to be set to the same value on all 8 nodes in a full rack Database Machine). Just as a side note, this parameter is set in processes, not in DOP, which equates to 4* Default DOP (2 processes for a DOP, default value is 2 * Default DOP, hence a default of 4 * Default DOP). Let’s say we have PARALLEL_SERVER_TARGET set to 128. With our limit set to 32 (the default) we are able to run 4 statements concurrently at the highest DOP possible on this system before we start queuing. If these 4 statements are running, any next statement will be queued. To run a system at high concurrency the PARALLEL_SERVER_TARGET should be raised from its default to be much closer (start with 60% or so) to PARALLEL_MAX_SERVERS. By using both PARALLEL_SERVER_TARGET and PARALLEL_DEGREE_LIMIT you can control easily how many statements run concurrently at good DOPs without excessive queuing. Because each workload is a little different, it makes sense to plan ahead and look at these parameters and set these based on your requirements.

  Read the article

• Passing the CAML thru the EY of the NEEDL

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Passing the CAML thru the EY of the NEEDL Definitions: CAML (Collaborative Application Markup Language) is an XML based markup language used in Microsoft SharePoint technologies  Anonymous: A camel is a horse designed by committee  Dov Trietsch: A CAML is a HORS designed by Microsoft  I was advised against putting any Camel and Sphinx rhymes in here. Look it up in Google!  _____ Now that we have dispensed with the dromedary jokes (BTW, I have many more, but they are not fit to print!), here is an interesting problem and its solution.  We have built a list where the title must be kept unique so I needed to verify the existence (or absence) of a list item with a particular title. Two methods came to mind:  1: Span the list until the title is found (result = found) or until the list ends (result = not found). This is an algorithm of complexity O(N) and for long lists it is a performance sucker. 2: Use a CAML query instead. Here, for short list we’ll encounter some overhead, but because the query results in an SQL query on the content database, it is of complexity O(LogN), which is significantly better and scales perfectly. Obviously I decided to go with the latter and this is where the CAML s--t hit the fan.   A CAML query returns a SPListItemCollection and I simply checked its Count. If it was 0, the item did not already exist and it was safe to add a new item with the given title. Otherwise I cancelled the operation and warned the user. The trouble was that I always got a positive. Most of the time a false positive. The count was greater than 0 regardles of the title I checked (except when the list was empty, which happens only once). This was very disturbing indeed. To solve my immediate problem which was speedy delivery, I reverted to the “Span the list” approach, but the problem bugged me, so I wrote a little console app by which I tested and tweaked and tested, time and again, until I found the solution. Yes, one can pass the proverbial CAML thru the ey of the needle (e’s missing on purpose).  So here are my conclusions:  CAML that does not work:  Note: QT is my quote:  char QT = Convert.ToChar((int)34); string titleQuery = "<Query>><Where><Eq>"; titleQuery += "<FieldRef Name=" + QT + "Title" + QT + "/>"; titleQuery += "<Value Type=" + QT + "Text" + QT + ">" + uniqueID + "</Value></Eq></Where></Query>"; titleQuery += "<ViewFields><FieldRef Name=" + QT + "Title" + QT + "/></ViewFields>";  Why? Even though U2U generates it, the <Query> and </Query> tags do not belong in the query that you pass. Start your query with the <Where> clause.  Also the <ViewFiels> clause does not belong. I used this clause to limit the returned collection to a single column, and I still wish to do it. I’ll show how this is done a bit later.   When you use the <Query> </Query> tags in you query, it’s as if you did not specify the query at all. What you get is the all inclusive default query for the list. It returns evey column and every item. It is expensive for both server and network because it does all the extra processing and eats plenty of bandwidth.   Now, here is the CAML that works  string titleQuery = "<Where><Eq>"; titleQuery += "<FieldRef Name=" + QT + "Title" + QT + "/>"; titleQuery += "<Value Type=" + QT + "Text" + QT + ">" + uniqueID + "</Value></Eq></Where>";  You’ll also notice that inside the unusable <ViewFields> clause above, we have a <FieldRef> clause. This is what we pass to the SPQuery object. Here is how:  SPQuery query = new SPQuery(); query.Query = titleQuery; query.ViewFields = "<FieldRef Name=" + QT + "Title" + QT + "/>"; query.RowLimit = 1; SPListItemCollection col = masterList.GetItems(query);  Two thing to note: we enter the view fields into the SPQuery object and we also limited the number of rows that the query returns. The latter is not always done, but in an existence test, there is no point in returning hundreds of rows. The query will now return one item or none, which is all we need in order to verify the existence (or non-existence) of items. Limiting the number of columns and the number of rows is a great performance enhancer. That’s all folks!!

  Read the article

• Event Logging in LINQ C# .NET

  The first thing you'll want to do before using this code is to create a table in your database called TableHistory: CREATE TABLE [dbo].[TableHistory] (     [TableHistoryID] [int] IDENTITY NOT NULL ,     [TableName] [varchar] (50) NOT NULL ,     [Key1] [varchar] (50) NOT NULL ,     [Key2] [varchar] (50) NULL ,     [Key3] [varchar] (50) NULL ,     [Key4] [varchar] (50) NULL ,     [Key5] [varchar] (50) NULL ,     [Key6] [varchar] (50)NULL ,     [ActionType] [varchar] (50) NULL ,     [Property] [varchar] (50) NULL ,     [OldValue] [varchar] (8000) NULL ,     [NewValue] [varchar] (8000) NULL ,     [ActionUserName] [varchar] (50) NOT NULL ,     [ActionDateTime] [datetime] NOT NULL ) Once you have created the table, you'll need to add it to your custom LINQ class (which I will refer to as DboDataContext), thus creating the TableHistory class. Then, you'll need to add the History.cs file to your project. You'll also want to add the following code to your project to get the system date: public partial class DboDataContext{ [Function(Name = "GetDate", IsComposable = true)] public DateTime GetSystemDate() { MethodInfo mi = MethodBase.GetCurrentMethod() as MethodInfo; return (DateTime)this.ExecuteMethodCall(this, mi, new object[] { }).ReturnValue; }}private static Dictionary<type,> _cachedIL = new Dictionary<type,>();public static T CloneObjectWithIL<t>(T myObject){ Delegate myExec = null; if (!_cachedIL.TryGetValue(typeof(T), out myExec)) { // Create ILGenerator DynamicMethod dymMethod = new DynamicMethod("DoClone", typeof(T), new Type[] { typeof(T) }, true); ConstructorInfo cInfo = myObject.GetType().GetConstructor(new Type[] { }); ILGenerator generator = dymMethod.GetILGenerator(); LocalBuilder lbf = generator.DeclareLocal(typeof(T)); //lbf.SetLocalSymInfo("_temp"); generator.Emit(OpCodes.Newobj, cInfo); generator.Emit(OpCodes.Stloc_0); foreach (FieldInfo field in myObject.GetType().GetFields( System.Reflection.BindingFlags.Instance | System.Reflection.BindingFlags.Public | System.Reflection.BindingFlags.NonPublic)) { // Load the new object on the eval stack... (currently 1 item on eval stack) generator.Emit(OpCodes.Ldloc_0); // Load initial object (parameter) (currently 2 items on eval stack) generator.Emit(OpCodes.Ldarg_0); // Replace value by field value (still currently 2 items on eval stack) generator.Emit(OpCodes.Ldfld, field); // Store the value of the top on the eval stack into // the object underneath that value on the value stack. // (0 items on eval stack) generator.Emit(OpCodes.Stfld, field); } // Load new constructed obj on eval stack -> 1 item on stack generator.Emit(OpCodes.Ldloc_0); // Return constructed object. --> 0 items on stack generator.Emit(OpCodes.Ret); myExec = dymMethod.CreateDelegate(typeof(Func<t,>)); _cachedIL.Add(typeof(T), myExec); } return ((Func<t,>)myExec)(myObject);}I got both of the above methods off of the net somewhere (maybe even from CodeProject), but it's been long enough that I can't recall where I got them.Explanation of the History ClassThe History class records changes by creating a TableHistory record, inserting the values for the primary key for the table being modified into the Key1, Key2, ..., Key6 columns (if you have more than 6 values that make up a primary key on any table, you'll want to modify this), setting the type of change being made in the ActionType column (INSERT, UPDATE, or DELETE), old value and new value if it happens to be an update action, and the date and Windows identity of the user who made the change.Let's examine what happens when a call is made to the RecordLinqInsert method:public static void RecordLinqInsert(DboDataContext dbo, IIdentity user, object obj){ TableHistory hist = NewHistoryRecord(obj); hist.ActionType = "INSERT"; hist.ActionUserName = user.Name; hist.ActionDateTime = dbo.GetSystemDate(); dbo.TableHistories.InsertOnSubmit(hist);}private static TableHistory NewHistoryRecord(object obj){ TableHistory hist = new TableHistory(); Type type = obj.GetType(); PropertyInfo[] keys; if (historyRecordExceptions.ContainsKey(type)) { keys = historyRecordExceptions[type].ToArray(); } else { keys = type.GetProperties().Where(o => AttrIsPrimaryKey(o)).ToArray(); } if (keys.Length > KeyMax) throw new HistoryException("object has more than " + KeyMax.ToString() + " keys."); for (int i = 1; i <= keys.Length; i++) { typeof(TableHistory) .GetProperty("Key" + i.ToString()) .SetValue(hist, keys[i - 1].GetValue(obj, null).ToString(), null); } hist.TableName = type.Name; return hist;}protected static bool AttrIsPrimaryKey(PropertyInfo pi){ var attrs = from attr in pi.GetCustomAttributes(typeof(ColumnAttribute), true) where ((ColumnAttribute)attr).IsPrimaryKey select attr; if (attrs != null && attrs.Count() > 0) return true; else return false;}RecordLinqInsert takes as input a data context which it will use to write to the database, the user, and the LINQ object to be recorded (a single object, for instance, a Customer or Order object if you're using AdventureWorks). It then calls the NewHistoryRecord method, which uses LINQ to Objects in conjunction with the AttrIsPrimaryKey method to pull all the primary key properties, set the Key1-KeyN properties of the TableHistory object, and return the new TableHistory object. The code would be called in an application, like so: Continue span.fullpost {display:none;}

  Read the article

• How to Sync Any Folder With SkyDrive on Windows 8.1

  - by Chris Hoffman

  Before Windows 8.1, it was possible to sync any folder on your computer with SkyDrive using symbolic links. This method no longer works now that SkyDrive is baked into Windows 8.1, but there are other tricks you can use. Creating a symbolic link or directory junction inside your SkyDrive folder will give you an empty folder in your SkyDrive cloud storage. Confusingly, the files will appear inside the SkyDrive Modern app as if they were being synced, but they aren’t. The Solution With SkyDrive refusing to understand and accept symbolic links in its own folder, the best option is probably to use symbolic links anyway — but in reverse. For example, let’s say you have a program that automatically saves important data to a folder anywhere on your hard drive — whether it’s C:\Users\USER\Documents\, C:\Program\Data, or anywhere else. Rather than trying to trick SkyDrive into understanding a symbolic link, we could instead move the actual folder itself to SkyDrive and then use a symbolic link at the folder’s original location to trick the original program. This may not work for every single program out there. But it will likely work for most programs, which use standard Windows API calls to access folders and save files. We’re just flipping the old solution here — we can’t trick SkyDrive anymore, so let’s try to trick other programs instead. Moving a Folder and Creating a Symbolic Link First, ensure no program is using the external folder. For example, if it’s a program data or settings folder, close the program that’s using the folder. Next, simply move the folder to your SkyDrive folder. Right-click the external folder, select Cut, go to the SkyDrive folder, right-click and select Paste. The folder will now be located in the SkyDrive folder itself, so it will sync normally. Next, open a Command Prompt window as Administrator. Right-click the Start button on the taskbar or press Windows Key + X and select Command Prompt (Administrator) to open it. Run the following command to create a symbolic link at the original location of the folder: mklink /d “C:\Original\Folder\Location” “C:\Users\NAME\SkyDrive\FOLDERNAME\” Enter the correct paths for the exact location of the original folder and the current location of the folder in your SkyDrive. Windows will then create a symbolic link at the folder’s original location. Most programs should hopefully be tricked by this symbolic location, saving their files directly to SkyDrive. You can test this yourself. Put a file into the folder at its original location. It will be saved to SkyDrive and sync normally, appearing in your SkyDrive storage online. One downside here is that you won’t be able to save a file onto SkyDrive without it taking up space on the same hard drive SkyDrive is on. You won’t be able to scatter folders across multiple hard drives and sync them all. However, you could always change the location of the SkyDrive folder on Windows 8.1 and put it on a drive with a larger amount of free space. To do this, right-click the SkyDrive folder in File Explorer, select Properties, and use the options on the Location tab. You could even use Storage Spaces to combine the drives into one larger drive. Automatically Copy the Original Files to SkyDrive Another option would be to run a program that automatically copies files from another folder on your computer to your SkyDrive folder. For example, let’s say you want to sync copies of important log files that a program creates in a specific folder. You could use a program that allows you to schedule automatic folder-mirroring, configuring the program to regularly copy the contents of your log folder to your SkyDrive folder. This may be a useful alternative for some use cases, although it isn’t the same as standard syncing. You’ll end up with two copies of the files taking up space on your system, which won’t be ideal for large files. The files also won’t be instantly uploaded to your SkyDrive storage after they’re created, but only after the scheduled task runs. There are many options for this, including Microsoft’s own SyncToy, which continues to work on Windows 8. If you were using the symbolic link trick to automatically sync copies of PC game save files with SkyDrive, you could just install GameSave Manager. It can be configured to automatically create backup copies of your computer’s PC game save files on a schedule, saving them to SkyDrive where they’ll be synced and backed up online. SkyDrive support was completely rewritten for Windows 8.1, so it’s not surprising that this trick no longer works. The ability to use symbolic links in previous versions of SkyDrive was never officially supported, so it’s not surprising to see it break after a rewrite. None of the methods above are as convenient and quick as the old symbolic link method, but they’re the best we can do with the SkyDrive integration Microsoft has given us in Windows 8.1. It’s still possible to use symbolic links to easily sync other folders with competing cloud storage services like Dropbox and Google Drive, so you may want to consider switching away from SkyDrive if this feature is critical to you.     

  Read the article

• MVVM Light V4 preview 2 (BL0015) #mvvmlight

  - by Laurent Bugnion

  Over the past few weeks, I have worked hard on a few new features for MVVM Light V4. Here is a second early preview (consider this pre-alpha if you wish). The features are unit-tested, but I am now looking for feedback and there might be bugs! Bug correction: Messenger.CleanupList is now thread safe This was an annoying bug that is now corrected: In some circumstances, an exception could be thrown when the Messenger’s recipients list was cleaned up (i.e. the “dead” instances were removed). The method is called now and then and the exception was thrown apparently at random. In fact it was really a multi-threading issue, which is now corrected. Bug correction: AllowPartiallyTrustedCallers prevents EventToCommand to work This is a particularly annoying regression bug that was introduced in BL0014. In order to allow MVVM Light to work in XBAPs too, I added the AllowPartiallyTrustedCallers attribute to the assemblies. However, we just found out that this causes issues when using EventToCommand. In order to allow EventToCommand to continue working, I reverted to the previous state by removing the AllowPartiallyTrustedCallers attribute for now. I will work with my friends at Microsoft to try and find a solution. Stay tuned. Bug correction: XML documentation file is now generated in Release configuration The XML documentation file was not generated for the Release configuration. This was a simple flag in the project file that I had forgotten to set. This is corrected now. Applying EventToCommand to non-FrameworkElements This feature has been requested in order to be able to execute a command when a Storyboard is completed. I implemented this, but unfortunately found out that EventToCommand can only be added to Storyboards in Silverlight 3 and Silverlight 4, but not in WPF or in Windows Phone 7. This obviously limits the usefulness of this change, but I decided to publish it anyway, because it is pretty damn useful in Silverlight… Why not in WPF? In WPF, Storyboards added to a resource dictionary are frozen. This is a feature of WPF which allows to optimize certain objects for performance: By freezing them, it is a contract where we say “this object will not be modified anymore, so do your perf optimization on them without worrying too much”. Unfortunately, adding a Trigger (such as EventTrigger) to an object in resources does not work if this object is frozen… and unfortunately, there is no way to tell WPF not to freeze the Storyboard in the resources… so there is no way around that (at least none I can see. In Silverlight, objects are not frozen, so an EventTrigger can be added without problems. Why not in WP7? In Windows Phone 7, there is a totally different issue: Adding a Trigger can only be done to a FrameworkElement, which Storyboard is not. Here I think that we might see a change in a future version of the framework, so maybe this small trick will work in the future. Workaround? Since you cannot use the EventToCommand on a Storyboard in WPF and in WP7, the workaround is pretty obvious: Handle the Completed event in the code behind, and call the Command from there on the ViewModel. This object can be obtained by casting the DataContext to the ViewModel type. This means that the View needs to know about the ViewModel, but I never had issues with that anyway. New class: NotifyPropertyChanged Sometimes when you implement a model object (for example Customer), you would like to have it implement INotifyPropertyChanged, but without having all the frills of a ViewModelBase. A new class named NotifyPropertyChanged allows you to do that. This class is a simple implementation of INotifyPropertyChaned (with all the overloads of RaisePropertyChanged that were implemented in BL0014). In fact, ViewModelBase inherits NotifyPropertyChanged. ViewModelBase does not implement IDisposable anymore The IDisposable interface and the Dispose method had been marked obsolete in the ViewModelBase class already in V3. Now they have been removed. Note: By this, I do not mean that IDisposable is a bad interface, or that it shouldn’t be used on viewmodels. In the contrary, I know that this interface is very useful in certain circumstances. However, I think that having it by default on every instance of ViewModelBase was sending a wrong message. This interface has a strong meaning in .NET: After Dispose has been executed, the instance should not be used anymore, and should be ready for garbage collection. What I really wanted to have on ViewModelBase was rather a simple cleanup method, something that can be executed now and then during runtime. This is fulfilled by the ICleanup interface and its Cleanup method. If your ViewModels need IDisposable, you can still use it! You will just have to implement the interface on the class itself, because it is not available on ViewModelBase anymore. What’s next? I have a couple exciting new features implemented already but that need more testing before they go live… Just stay tuned and by MIX11 (12-14 April 2011), we should see at least a major addition to MVVM Light Toolkit, as well as another smaller feature which is pretty cool nonetheless More about this later! Happy Coding Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Personal search – the future of search

  - by jamiet

  [Four months ago I wrote a meandering blog post on another blogging site entitled Personal search – the future of search. The points I made therein are becoming more relevant to what I'm reading about and hoping to get involved in in the future so I'm re-posting here to a wider audience to hopefully get some more feedback and guage reaction to it. This has been prompted by the book Pull by David Siegel that is forming my current holiday reading (recommended to me by a commenter on my previous post Interesting things – Twitter annotations and your phone as a web server) and in particular by Siegel's notion of us all in the future having a personal online data vault.] My one-time colleague Paul Dawson recently wrote an article called The Future of Search and in it he proposed some interesting ideas. Some choice quotes: The growth of Chinese search giant Baidu is an indicator that fully localised and tailored content and offerings have great traction with local audiences This trend is already driving an increase in the use of specialist searches … Look at how Farecast is now integrated into Bing for example, or how Flightstats is now integrated into Google. Search does not necessarily have to begin with a keyword, but could start instead with a click or a touch. Take a look at Retrievr. Start drawing a picture in the box and see what happens. This is certainly search without the need for typing in keywords search technology has advanced greatly in recent years. The recent launch of Microsoft Live Labs’ Pivot has given us a taste of what we can expect to see in the future This really got me thinking about where search might go in the future and as my mind wandered I realised that as the amount of data that we collect about ourselves increases so too will the need and the desire to search it. The amount of electronic data that exists about each and every person is increasing and in the near future I fully expect that we are going to be able to store personal data such as: A history of our location (in fact Google Latitude already offers this facility) Recordings of all our phone conversations Health information history (weight, blood pressure etc…) Energy usage Spending history What films we watch, what radio stations we listen to Voting history Of course, most of this stuff is already stored somewhere but crucially we don’t have easy access to it. My utilities supplier knows how much electricity I’m using but if I want to know for myself I have to go and dig through my statements (assuming I have kept them). Similarly my doctor probably has ready access to all of my health records, my bank knows exactly what I have spent my money on, my cable supplier knows what I watch on TV and my mobile phone supplier probably knows exactly where I am and where I’ve been for the past few years. Strange then that none of this electronic information is available to me in a way that I can really make use of it; after all, its MY information. Its MY data. I created it. That is set to change. As technologies mature and customers become more technically cognizant they will demand more access to the data that companies hold about them. The companies themselves will realise the benefit that they derive from giving users what they want and will embrace ways of providing it. As a result the amount of data that we store about ourselves is going to increase exponentially and the desire to search and derive value from that data is going to grow with it; we are about to enter the era of the “personal datastore” and we will want, and need, to search through it in order to make sense of it all. Its interesting then that today when we think of search we think of search engines and yet in these personal datastores we’re referring to data that search engines can’t touch because WE own it and we (hopefully) choose to keep it private. Someone, I know not who, is going to lead in this space by making it easy for us to search our data and retrieve information that we have either forgotten or maybe didn’t even know in the first place. We will learn new things about ourselves and about our habits; we will share these findings with whomever we choose; we will compare what we discover with others; we will collaborate for mutual benefit and, most of all, we will educate ourselves as to how to live our lives better. Search will be the means to that end, it will enable us to make sense of the wealth of information that we will collect day in day out. The future of search is personal, why would we be interested in anything else? @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Unable to sign in. How to debug?

  - by Dmitriy Budnik

  I had to reboot system with reset button. After reboot I can't sign in. When I enter my password It seems like X-server just restarts. I can sing in as guest and also I can sign in in text TTY. Here is first 150 lines of my lightdm.log: [+0.04s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.04s] DEBUG: Starting Light Display Manager 1.2.1, UID=0 PID=1070 [+0.04s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf [+0.04s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.04s] DEBUG: Registered seat module xlocal [+0.04s] DEBUG: Registered seat module xremote [+0.04s] DEBUG: Adding default seat [+0.04s] DEBUG: Starting seat [+0.04s] DEBUG: Starting new display for automatic login as user dmytro [+0.04s] DEBUG: Starting local X display [+3.64s] DEBUG: X server :0 will replace Plymouth [+3.66s] DEBUG: Using VT 7 [+3.66s] DEBUG: Activating VT 7 [+3.66s] DEBUG: Logging to /var/log/lightdm/x-0.log [+3.66s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+3.66s] DEBUG: Launching X Server [+3.66s] DEBUG: Launching process 1154: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none [+3.66s] DEBUG: Waiting for ready signal from X server :0 [+3.66s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+3.66s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+10.78s] DEBUG: Got signal 10 from process 1154 [+10.78s] DEBUG: Got signal from X server :0 [+10.78s] DEBUG: Stopping Plymouth, X server is ready [+10.80s] DEBUG: Connecting to XServer :0 [+10.80s] DEBUG: Automatically logging in user dmytro [+10.80s] DEBUG: Started session 1303 with service 'lightdm-autologin', username 'dmytro' [+13.22s] DEBUG: Session 1303 authentication complete with return value 0: Success [+13.26s] DEBUG: Autologin user dmytro authorized [+13.27s] DEBUG: Autologin using session ubuntu [+14.44s] DEBUG: Dropping privileges to uid 1000 [+14.48s] DEBUG: Restoring privileges [+14.49s] DEBUG: Dropping privileges to uid 1000 [+14.49s] DEBUG: Writing /home/dmytro/.dmrc [+14.61s] DEBUG: Restoring privileges [+14.81s] DEBUG: Starting session ubuntu as user dmytro [+14.81s] DEBUG: Session 1303 running command /usr/sbin/lightdm-session gnome-session --session=ubuntu [+15.76s] DEBUG: New display ready, switching to it [+15.76s] DEBUG: Activating VT 7 [+15.76s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0 [+16.63s] DEBUG: Session 1303 exited with return value 0 [+16.63s] DEBUG: User session quit [+16.63s] DEBUG: Stopping display [+16.63s] DEBUG: Sending signal 15 to process 1154 [+17.19s] DEBUG: Process 1154 exited with return value 0 [+17.19s] DEBUG: X server stopped [+17.19s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+17.19s] DEBUG: Releasing VT 7 [+17.19s] DEBUG: Display server stopped [+17.19s] DEBUG: Display stopped [+17.19s] DEBUG: Active display stopped, switching to greeter [+17.19s] DEBUG: Switching to greeter [+17.19s] DEBUG: Starting new display for greeter [+17.19s] DEBUG: Starting local X display [+17.19s] DEBUG: Using VT 7 [+17.19s] DEBUG: Logging to /var/log/lightdm/x-0.log [+17.19s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+17.19s] DEBUG: Launching X Server [+17.19s] DEBUG: Launching process 1563: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+17.19s] DEBUG: Waiting for ready signal from X server :0 [+17.48s] DEBUG: Got signal 10 from process 1563 [+17.48s] DEBUG: Got signal from X server :0 [+17.48s] DEBUG: Connecting to XServer :0 [+17.48s] DEBUG: Starting greeter [+17.48s] DEBUG: Started session 1575 with service 'lightdm', username 'lightdm' [+17.61s] DEBUG: Session 1575 authentication complete with return value 0: Success [+17.61s] DEBUG: Greeter authorized [+17.61s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log [+17.68s] DEBUG: Session 1575 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter [+20.86s] DEBUG: Greeter connected version=1.2.1 [+20.86s] DEBUG: Greeter connected, display is ready [+20.86s] DEBUG: New display ready, switching to it [+20.86s] DEBUG: Activating VT 7 [+20.86s] DEBUG: Stopping greeter display being switched from [+24.90s] DEBUG: Greeter start authentication for dmytro [+24.90s] DEBUG: Started session 1746 with service 'lightdm', username 'dmytro' [+25.10s] DEBUG: Session 1746 got 1 message(s) from PAM [+25.10s] DEBUG: Prompt greeter with 1 message(s) [+31.87s] DEBUG: Continue authentication [+33.75s] DEBUG: Session 1746 authentication complete with return value 7: Authentication failure [+33.75s] DEBUG: Authenticate result for user dmytro: Authentication failure [+33.75s] DEBUG: Greeter start authentication for dmytro [+33.75s] DEBUG: Session 1746: Sending SIGTERM [+33.75s] DEBUG: Started session 2264 with service 'lightdm', username 'dmytro' [+33.75s] DEBUG: Session 2264 got 1 message(s) from PAM [+33.75s] DEBUG: Prompt greeter with 1 message(s) [+36.41s] DEBUG: Continue authentication [+36.53s] DEBUG: Session 2264 authentication complete with return value 0: Success [+36.53s] DEBUG: Authenticate result for user dmytro: Success [+36.54s] DEBUG: User dmytro authorized [+36.54s] DEBUG: Greeter requests session ubuntu [+36.54s] DEBUG: Using session ubuntu [+36.54s] DEBUG: Stopping greeter [+36.54s] DEBUG: Session 1575: Sending SIGTERM [+37.41s] DEBUG: Greeter closed communication channel [+37.41s] DEBUG: Session 1575 exited with return value 0 [+37.41s] DEBUG: Greeter quit [+37.42s] DEBUG: Dropping privileges to uid 1000 [+37.42s] DEBUG: Restoring privileges [+37.43s] DEBUG: Dropping privileges to uid 1000 [+37.43s] DEBUG: Writing /home/dmytro/.dmrc [+38.35s] DEBUG: Restoring privileges [+40.37s] DEBUG: Starting session ubuntu as user dmytro [+40.37s] DEBUG: Session 2264 running command /usr/sbin/lightdm-session gnome-session --session=ubuntu [+40.39s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session1 [+50.78s] DEBUG: Session 2264 exited with return value 0 [+50.78s] DEBUG: User session quit [+50.78s] DEBUG: Stopping display [+50.78s] DEBUG: Sending signal 15 to process 1563 [+51.53s] DEBUG: Process 1563 exited with return value 0 [+51.53s] DEBUG: X server stopped [+51.53s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+51.53s] DEBUG: Releasing VT 7 [+51.53s] DEBUG: Display server stopped [+51.53s] DEBUG: Display stopped [+51.53s] DEBUG: Active display stopped, switching to greeter [+51.53s] DEBUG: Switching to greeter [+51.53s] DEBUG: Starting new display for greeter [+51.53s] DEBUG: Starting local X display [+51.53s] DEBUG: Using VT 7 [+51.53s] DEBUG: Logging to /var/log/lightdm/x-0.log [+51.53s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+51.53s] DEBUG: Launching X Server [+51.53s] DEBUG: Launching process 2894: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+51.53s] DEBUG: Waiting for ready signal from X server :0 [+51.75s] DEBUG: Got signal 10 from process 2894 [+51.75s] DEBUG: Got signal from X server :0 [+51.75s] DEBUG: Connecting to XServer :0 [+51.75s] DEBUG: Starting greeter [+51.75s] DEBUG: Started session 2898 with service 'lightdm', username 'lightdm' [+51.76s] DEBUG: Session 2898 authentication complete with return value 0: Success [+51.76s] DEBUG: Greeter authorized [+51.76s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log [+51.76s] DEBUG: Session 2898 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter [+53.26s] DEBUG: Greeter connected version=1.2.1 [+53.26s] DEBUG: Greeter connected, display is ready [+53.26s] DEBUG: New display ready, switching to it [+53.26s] DEBUG: Activating VT 7 [+53.26s] DEBUG: Stopping greeter display being switched from [+54.17s] DEBUG: Greeter start authentication for dmytro [+54.17s] DEBUG: Started session 3152 with service 'lightdm', username 'dmytro' [+54.18s] DEBUG: Session 3152 got 1 message(s) from PAM [+54.18s] DEBUG: Prompt greeter with 1 message(s) [+58.61s] DEBUG: Continue authentication [+58.65s] DEBUG: Session 3152 authentication complete with return value 0: Success [+58.65s] DEBUG: Authenticate result for user dmytro: Success [+58.66s] DEBUG: User dmytro authorized [+58.66s] DEBUG: Greeter requests session ubuntu [+58.66s] DEBUG: Using session ubuntu [+58.66s] DEBUG: Stopping greeter [+58.66s] DEBUG: Session 2898: Sending SIGTERM How can I fix it? What other .log files could possibly give me a clue? Update: Possibly it's duplicate of Desktop login fails, terminal works

  Read the article

• .NET Security Part 2

  - by Simon Cooper

  So, how do you create partial-trust appdomains? Where do you come across them? There are two main situations in which your assembly runs as partially-trusted using the Microsoft .NET stack: Creating a CLR assembly in SQL Server with anything other than the UNSAFE permission set. The permissions available in each permission set are given here. Loading an assembly in ASP.NET in any trust level other than Full. Information on ASP.NET trust levels can be found here. You can configure the specific permissions available to assemblies using ASP.NET policy files. Alternatively, you can create your own partially-trusted appdomain in code and directly control the permissions and the full-trust API available to the assemblies you load into the appdomain. This is the scenario I’ll be concentrating on in this post. Creating a partially-trusted appdomain There is a single overload of AppDomain.CreateDomain that allows you to specify the permissions granted to assemblies in that appdomain – this one. This is the only call that allows you to specify a PermissionSet for the domain. All the other calls simply use the permissions of the calling code. If the permissions are restricted, then the resulting appdomain is referred to as a sandboxed domain. There are three things you need to create a sandboxed domain: The specific permissions granted to all assemblies in the domain. The application base (aka working directory) of the domain. The list of assemblies that have full-trust if they are loaded into the sandboxed domain. The third item is what allows us to have a fully-trusted API that is callable by partially-trusted code. I’ll be looking at the details of this in a later post. Granting permissions to the appdomain Firstly, the permissions granted to the appdomain. This is encapsulated in a PermissionSet object, initialized either with no permissions or full-trust permissions. For sandboxed appdomains, the PermissionSet is initialized with no permissions, then you add permissions you want assemblies loaded into that appdomain to have by default: PermissionSet restrictedPerms = new PermissionSet(PermissionState.None); // all assemblies need Execution permission to run at all restrictedPerms.AddPermission( new SecurityPermission(SecurityPermissionFlag.Execution)); // grant general read access to C:\config.xml restrictedPerms.AddPermission( new FileIOPermission(FileIOPermissionAccess.Read, @"C:\config.xml")); // grant permission to perform DNS lookups restrictedPerms.AddPermission( new DnsPermission(PermissionState.Unrestricted)); It’s important to point out that the permissions granted to an appdomain, and so to all assemblies loaded into that appdomain, are usable without needing to go through any SafeCritical code (see my last post if you’re unsure what SafeCritical code is). That is, partially-trusted code loaded into an appdomain with the above permissions (and so running under the Transparent security level) is able to create and manipulate a FileStream object to read from C:\config.xml directly. It is only for operations requiring permissions that are not granted to the appdomain that partially-trusted code is required to call a SafeCritical method that then asserts the missing permissions and performs the operation safely on behalf of the partially-trusted code. The application base of the domain This is simply set as a property on an AppDomainSetup object, and is used as the default directory assemblies are loaded from: AppDomainSetup appDomainSetup = new AppDomainSetup { ApplicationBase = @"C:\temp\sandbox", }; If you’ve read the documentation around sandboxed appdomains, you’ll notice that it mentions a security hole if this parameter is set correctly. I’ll be looking at this, and other pitfalls, that will break the sandbox when using sandboxed appdomains, in a later post. Full-trust assemblies in the appdomain Finally, we need the strong names of the assemblies that, when loaded into the appdomain, will be run as full-trust, irregardless of the permissions specified on the appdomain. These assemblies will contain methods and classes decorated with SafeCritical and Critical attributes. I’ll be covering the details of creating full-trust APIs for partial-trust appdomains in a later post. This is how you get the strongnames of an assembly to be executed as full-trust in the sandbox: // get the Assembly object for the assembly Assembly assemblyWithApi = ... // get the StrongName from the assembly's collection of evidence StrongName apiStrongName = assemblyWithApi.Evidence.GetHostEvidence<StrongName>(); Creating the sandboxed appdomain So, putting these three together, you create the appdomain like so: AppDomain sandbox = AppDomain.CreateDomain( "Sandbox", null, appDomainSetup, restrictedPerms, apiStrongName); You can then load and execute assemblies in this appdomain like any other. For example, to load an assembly into the appdomain and get an instance of the Sandboxed.Entrypoint class, implementing IEntrypoint, you do this: IEntrypoint o = (IEntrypoint)sandbox.CreateInstanceFromAndUnwrap( "C:\temp\sandbox\SandboxedAssembly.dll", "Sandboxed.Entrypoint"); // call method the Execute method on this object within the sandbox o.Execute(); The second parameter to CreateDomain is for security evidence used in the appdomain. This was a feature of the .NET 2 security model, and has been (mostly) obsoleted in the .NET 4 model. Unless the evidence is needed elsewhere (eg. isolated storage), you can pass in null for this parameter. Conclusion That’s the basics of sandboxed appdomains. The most important object is the PermissionSet that defines the permissions available to assemblies running in the appdomain; it is this object that defines the appdomain as full or partial-trust. The appdomain also needs a default directory used for assembly lookups as the ApplicationBase parameter, and you can specify an optional list of the strongnames of assemblies that will be given full-trust permissions if they are loaded into the sandboxed appdomain. Next time, I’ll be looking closer at full-trust assemblies running in a sandboxed appdomain, and what you need to do to make an API available to partial-trust code.

  Read the article

• Cross-language Extension Method Calling

  - by Tom Hines

  Extension methods are a concise way of binding functions to particular types. In my last post, I showed how Extension methods can be created in the .NET 2.0 environment. In this post, I discuss calling the extensions from other languages. Most of the differences I find between the Dot Net languages are mainly syntax.  The declaration of Extensions is no exception.  There is, however, a distinct difference with the framework accepting excensions made with C++ that differs from C# and VB.  When calling the C++ extension from C#, the compiler will SOMETIMES say there is no definition for DoCPP with the error: 'string' does not contain a definition for 'DoCPP' and no extension method 'DoCPP' accepting a first argument of type 'string' could be found (are you missing a using directive or an assembly reference?) If I recompile, the error goes away. The strangest problem with calling the C++ extension from C# is that I first must make SOME type of reference to the class BEFORE using the extension or it will not be recognized at all.  So, if I first call the DoCPP() as a static method, the extension works fine later.  If I make a dummy instantiation of the class, it works.  If I have no forward reference of the class, I get the same error as before and recompiling does not fix it.  It seems as if this none of this is supposed to work across the languages. I have made a few work-arounds to get the examples to compile and run. Note the following examples: Extension in C# using System; namespace Extension_CS {    public static class CExtension_CS    {  //in C#, the "this" keyword is the key.       public static void DoCS(this string str)       {          Console.WriteLine("CS\t{0:G}\tCS", str);       }    } } Extension in C++ /****************************************************************************\  * Here is the C++ implementation.  It is the least elegant and most quirky,  * but it works. \****************************************************************************/ #pragma once using namespace System; using namespace System::Runtime::CompilerServices;     //<-Essential // Reference: System.Core.dll //<- Essential namespace Extension_CPP {        public ref class CExtension_CPP        {        public:               [Extension] // or [ExtensionAttribute] /* either works */               static void DoCPP(String^ str)               {                      Console::WriteLine("C++\t{0:G}\tC++", str);               }        }; } Extension in VB ' Here is the VB implementation.  This is not as elegant as the C#, but it's ' functional. Imports System.Runtime.CompilerServices ' Public Module modExtension_VB 'Extension methods can be defined only in modules.    <Extension()> _       Public Sub DoVB(ByVal str As String)       Console.WriteLine("VB" & Chr(9) & "{0:G}" & Chr(9) & "VB", str)    End Sub End Module   Calling program in C# /******************************************************************************\  * Main calling program  * Intellisense and VS2008 complain about the CPP implementation, but with a  * little duct-tape, it works just fine. \******************************************************************************/ using System; using Extension_CPP; using Extension_CS; using Extension_VB; // vitual namespace namespace TestExtensions {    public static class CTestExtensions    {       /**********************************************************************\        * For some reason, this needs a direct reference into the C++ version        * even though it does nothing than add a null reference.        * The constructor provides the fake usage to please the compiler.       \**********************************************************************/       private static CExtension_CPP x = null;   // <-DUCT_TAPE!       static CTestExtensions()       {          // Fake usage to stop compiler from complaining          if (null != x) {} // <-DUCT_TAPE       }       static void Main(string[] args)       {          string strData = "from C#";          strData.DoCPP();          strData.DoCS();          strData.DoVB();       }    } }   Calling program in VB  Imports Extension_CPP Imports Extension_CS Imports Extension_VB Imports System.Runtime.CompilerServices Module TestExtensions_VB    <Extension()> _       Public Sub DoCPP(ByVal str As String)       'Framework does not treat this as an extension, so use the static       CExtension_CPP.DoCPP(str)    End Sub    Sub Main()       Dim strData As String = "from VB"       strData.DoCS()       strData.DoVB()       strData.DoCPP() 'fake    End Sub End Module  Calling program in C++ // TestExtensions_CPP.cpp : main project file. #include "stdafx.h" using namespace System; using namespace Extension_CPP; using namespace Extension_CS; using namespace Extension_VB; void main(void) {        /*******************************************************\         * Extension methods are called like static methods         * when called from C++.  There may be a difference in         * syntax when calling the VB extension as VB Extensions         * are embedded in Modules instead of classes        \*******************************************************/     String^ strData = "from C++";     CExtension_CPP::DoCPP(strData);     CExtension_CS::DoCS(strData);     modExtension_VB::DoVB(strData); //since Extensions go in Modules }

  Read the article

• Windows 7 doesn't boot after Ubuntu install

  - by Omu

  I had windows 7 installed on my pc, then I installed Ubuntu 10.10/ During the installation process I have chosen to manually set my partitions: I set a 10GB drive for ubuntu root 1GB drive for swap and for boot drive I've chosen the one used by windows 7 Now I can boot ubuntu, I have the windows 7 option in the boot list, but when I choose Windows 7, it shows me a black screen for a second and returns back to boot screen. Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== = Windows is installed in the MBR of /dev/sda sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Grub 2 Boot sector info: Grub 2 is installed in the boot sector of sda1 and looks at sector 304908237 of the same hard drive for core.img, but core.img can not be found at this location. No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows XP Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sda3: _________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda4: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 63 62,894,474 62,894,412 7 HPFS/NTFS /dev/sda2 62,894,478 291,579,749 228,685,272 7 HPFS/NTFS /dev/sda3 291,579,811 309,157,937 17,578,127 5 Extended /dev/sda5 291,579,813 309,157,937 17,578,125 83 Linux /dev/sda4 309,159,936 312,580,095 3,420,160 82 Linux swap / Solaris blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 1266BB2766BB0A8D ntfs /dev/sda2 BEDBF1147C76F703 ntfs DATA /dev/sda3: PTTYPE="dos" /dev/sda4 dd38226d-c7c9-4ae5-a726-6d18d34a22e4 swap /dev/sda5 e1dafd1c-f855-406b-8f9a-f9d527c70255 ext4 /dev/sda: PTTYPE="dos" ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sda5 / ext4 (rw,errors=remount-ro,commit=0) =========================== sda5/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux /boot/vmlinuz-2.6.35-22-generic root=UUID=e1dafd1c-f855-406b-8f9a-f9d527c70255 ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=e1dafd1c-f855-406b-8f9a-f9d527c70255 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 1266bb2766bb0a8d chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sda5/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda5 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda4 during installation UUID=dd38226d-c7c9-4ae5-a726-6d18d34a22e4 none swap sw 0 0 =================== sda5: Location of files loaded by Grub: =================== 156.1GB: boot/grub/core.img 156.3GB: boot/grub/grub.cfg 149.9GB: boot/initrd.img-2.6.35-22-generic 156.3GB: boot/vmlinuz-2.6.35-22-generic 149.9GB: initrd.img 156.3GB: vmlinuz

  Read the article

• Token based Authentication for WCF HTTP/REST Services: Authentication

  - by Your DisplayName here!

  This post shows some of the implementation techniques for adding token and claims based security to HTTP/REST services written with WCF. For the theoretical background, see my previous post. Disclaimer The framework I am using/building here is not the only possible approach to tackle the problem. Based on customer feedback and requirements the code has gone through several iterations to a point where we think it is ready to handle most of the situations. Goals and requirements The framework should be able to handle typical scenarios like username/password based authentication, as well as token based authentication The framework should allow adding new supported token types Should work with WCF web programming model either self-host or IIS hosted Service code can rely on an IClaimsPrincipal on Thread.CurrentPrincipal that describes the client using claims-based identity Implementation overview In WCF the main extensibility point for this kind of security work is the ServiceAuthorizationManager. It gets invoked early enough in the pipeline, has access to the HTTP protocol details of the incoming request and can set Thread.CurrentPrincipal. The job of the SAM is simple: Check the Authorization header of the incoming HTTP request Check if a “registered” token (more on that later) is present If yes, validate the token using a security token handler, create the claims principal (including claims transformation) and set Thread.CurrentPrincipal If no, set an anonymous principal on Thread.CurrentPrincipal. By default, anonymous principals are denied access – so the request ends here with a 401 (more on that later). To wire up the custom authorization manager you need a custom service host – which in turn needs a custom service host factory. The full object model looks like this: Token handling A nice piece of existing WIF infrastructure are security token handlers. Their job is to serialize a received security token into a CLR representation, validate the token and turn the token into claims. The way this works with WS-Security based services is that WIF passes the name/namespace of the incoming token to WIF’s security token handler collection. This in turn finds out which token handler can deal with the token and returns the right instances. For HTTP based services we can do something very similar. The scheme on the Authorization header gives the service a hint how to deal with an incoming token. So the only missing link is a way to associate a token handler (or multiple token handlers) with a scheme and we are (almost) done. WIF already includes token handler for a variety of tokens like username/password or SAML 1.1/2.0. The accompanying sample has a implementation for a Simple Web Token (SWT) token handler, and as soon as JSON Web Token are ready, simply adding a corresponding token handler will add support for this token type, too. All supported schemes/token types are organized in a WebSecurityTokenHandlerCollectionManager and passed into the host factory/host/authorization manager. Adding support for basic authentication against a membership provider would e.g. look like this (in global.asax): var manager = new WebSecurityTokenHandlerCollectionManager(); manager.AddBasicAuthenticationHandler((username, password) => Membership.ValidateUser(username, password));   Adding support for Simple Web Tokens with a scheme of Bearer (the current OAuth2 scheme) requires passing in a issuer, audience and signature verification key: manager.AddSimpleWebTokenHandler(     "Bearer",     "http://identityserver.thinktecture.com/trust/initial",     "https://roadie/webservicesecurity/rest/",     "WFD7i8XRHsrUPEdwSisdHoHy08W3lM16Bk6SCT8ht6A="); In some situations, SAML token may be used as well. The following configures SAML support for a token coming from ADFS2: var registry = new ConfigurationBasedIssuerNameRegistry(); registry.AddTrustedIssuer( "d1 c5 b1 25 97 d0 36 94 65 1c e2 64 fe 48 06 01 35 f7 bd db", "ADFS"); var adfsConfig = new SecurityTokenHandlerConfiguration(); adfsConfig.AudienceRestriction.AllowedAudienceUris.Add( new Uri("https://roadie/webservicesecurity/rest/")); adfsConfig.IssuerNameRegistry = registry; adfsConfig.CertificateValidator = X509CertificateValidator.None; // token decryption (read from config) adfsConfig.ServiceTokenResolver = IdentityModelConfiguration.ServiceConfiguration.CreateAggregateTokenResolver();             manager.AddSaml11SecurityTokenHandler("SAML", adfsConfig);   Transformation The custom authorization manager will also try to invoke a configured claims authentication manager. This means that the standard WIF claims transformation logic can be used here as well. And even better, can be also shared with e.g. a “surrounding” web application. Error handling A WCF error handler takes care of turning “access denied” faults into 401 status codes and a message inspector adds the registered authentication schemes to the outgoing WWW-Authenticate header when a 401 occurs. The next post will conclude with authorization as well as the source code download.   (Wanna learn more about federation, WIF, claims, tokens etc.? Click here.)

  Read the article

• problem occur during installation of moses scripts

  - by lenny99

  we got error when compile moses-script. process of it as follows: minakshi@minakshi-Vostro-3500:~/Desktop/monu/moses/scripts$ make release # Compile the parts make all make[1]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts' # Building memscore may fail e.g. if boost is not available. # We ignore this because traditional scoring will still work and memscore isn't used by default. cd training/memscore ; \ ./configure && make \ || ( echo "WARNING: Building memscore failed."; \ echo 'training/memscore/memscore' >> ../../release-exclude ) checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for g++... g++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of g++... gcc3 checking for gcc... gcc checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for boostlib >= 1.31.0... yes checking for cos in -lm... yes checking for gzopen in -lz... yes checking for cblas_dgemm in -lgslcblas... no checking for gsl_blas_dgemm in -lgsl... no checking how to run the C++ preprocessor... g++ -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking n_gram.h usability... no checking n_gram.h presence... no checking for n_gram.h... no checking for size_t... yes checking for ptrdiff_t... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands make[2]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts/training/memscore' make all-am make[3]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts/training/memscore' make[3]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts/training/memscore' make[2]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts/training/memscore' touch release-exclude # No files excluded by default pwd=`pwd`; \ for subdir in cmert-0.5 phrase-extract symal mbr lexical-reordering; do \ make -C training/$subdir || exit 1; \ echo "### Compiler $subdir"; \ cd $pwd; \ done make[2]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts/training/cmert-0.5' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts/training/cmert-0.5' ### Compiler cmert-0.5 make[2]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts/training/phrase-extract' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts/training/phrase-extract' ### Compiler phrase-extract make[2]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts/training/symal' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts/training/symal' ### Compiler symal make[2]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts/training/mbr' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts/training/mbr' ### Compiler mbr make[2]: Entering directory `/home/minakshi/Desktop/monu/moses/scripts/training/lexical-reordering' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts/training/lexical-reordering' ### Compiler lexical-reordering ## All files that need compilation were compiled make[1]: Leaving directory `/home/minakshi/Desktop/monu/moses/scripts' /bin/sh: ./check-dependencies.pl: not found make: *** [release] Error 127 We don't know why this error occurs? check-dependencies.pl file existed in scripts folder ...

  Read the article

• Monitoring your WCF Web Apis with AppFabric

  - by cibrax

  The other day, Ron Jacobs made public a template in the Visual Studio Gallery for enabling monitoring capabilities to any existing WCF Http service hosted in Windows AppFabric. I thought it would be a cool idea to reuse some of that for doing the same thing on the new WCF Web Http stack. Windows AppFabric provides a dashboard that you can use to dig into some metrics about the services usage, such as number of calls, errors or information about different events during a service call. Those events not only include information about the WCF pipeline, but also custom events that any developer can inject and make sense for troubleshooting issues.      This monitoring capabilities can be enabled on any specific IIS virtual directory by using the AppFabric configuration tool or adding the following configuration sections to your existing web app, <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" /> <diagnostics etwProviderId="3e99c707-3503-4f33-a62d-2289dfa40d41"> <endToEndTracing propagateActivity="true" messageFlowTracing="true" /> </diagnostics> <behaviors> <serviceBehaviors> <behavior name=""> <etwTracking profileName="EndToEndMonitoring Tracking Profile" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel>   <microsoft.applicationServer> <monitoring> <default enabled="true" connectionStringName="ApplicationServerMonitoringConnectionString" monitoringLevel="EndToEndMonitoring" /> </monitoring> </microsoft.applicationServer> Bad news is that none of the configuration above can be easily set on code by using the new configuration model for WCF Web stack.  A good thing is that you easily disable it in the configuration when you no longer need it, and also uses ETW, a general-purpose and high-speed tracing facility provided by the operating system (it’s part of the windows kernel). By adding that configuration section, AppFabric will start monitoring your service automatically and providing some basic event information about the service calls. You need some custom code for injecting custom events in the monitoring data. What I did here is to copy and refactor the “WCFUserEventProvider” class provided as sample in the Ron’s template to make it more TDD friendly when using IoC. I created a simple interface “ILogger” that any service (or resource) can use to inject custom events or monitoring information in the AppFabric database. public interface ILogger { bool WriteError(string name, string format, params object[] args); bool WriteWarning(string name, string format, params object[] args); bool WriteInformation(string name, string format, params object[] args); } The “WCFUserEventProvider” class implements this interface by making possible to send the events to the AppFabric monitoring database. The service or resource implementation can receive an “ILogger” as part of the constructor. [ServiceContract] [Export] public class OrderResource { IOrderRepository repository; ILogger logger;   [ImportingConstructor] public OrderResource(IOrderRepository repository, ILogger logger) { this.repository = repository; this.logger = logger; }   [WebGet(UriTemplate = "{id}")] public Order Get(string id, HttpResponseMessage response) { var order = this.repository.All.FirstOrDefault(o => o.OrderId == int.Parse(id, CultureInfo.InvariantCulture)); if (order == null) { response.StatusCode = HttpStatusCode.NotFound; response.Content = new StringContent("Order not found"); }   this.logger.WriteInformation("Order Requested", "Order Id {0}", id);   return order; } } The example above uses “MEF” as IoC for injecting a repository and the logger implementation into the service. You can also see how the logger is used to write an information event in the monitoring database. The following image illustrates how the custom event is injected and the information becomes available for any user in the dashboard. An issue that you might run into and I hope the WCF and AppFabric teams fixed soon is that any WCF service that uses friendly URLs with ASP.NET routing does not get listed as a available service in the WCF services tab in the AppFabric console. The complete example is available to download from here.

  Read the article

• Nesting Linq-to-Objects query within Linq-to-Entities query –what is happening under the covers?

  - by carewithl

  var numbers = new int[] { 1, 2, 3, 4, 5 }; var contacts = from c in context.Contacts where c.ContactID == numbers.Max() | c.ContactID == numbers.FirstOrDefault() select c; foreach (var item in contacts) Console.WriteLine(item.ContactID); Linq-to-Entities query is first translated into Linq expression tree, which is then converted by Object Services into command tree. And if Linq-to-Entities query nests Linq-to-Objects query, then this nested query also gets translated into an expression tree. a) I assume none of the operators of the nested Linq-to-Objects query actually get executed, but instead data provider for particular DB (or perhaps Object Services) knows how to transform the logic of Linq-to-Objects operators into appropriate SQL statements? b) Data provider knows how to create equivalent SQL statements only for some of the Linq-to-Objects operators? c) Similarly, data provider knows how to create equivalent SQL statements only for some of the non-Linq methods in the Net Framework class library? EDIT: I know only some Sql so I can't be completely sure, but reading Sql query generated for the above code it seems data provider didn't actually execute numbers.Max method, but instead just somehow figured out that numbers.Max should return the maximum value and then proceed to include in generated Sql query a call to TSQL's build-in MAX function. It also put all the values held by numbers array into a Sql query. SELECT CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN '0X0X' ELSE '0X1X' END AS [C1], [Extent1].[ContactID] AS [ContactID], [Extent1].[FirstName] AS [FirstName], [Extent1].[LastName] AS [LastName], [Extent1].[Title] AS [Title], [Extent1].[AddDate] AS [AddDate], [Extent1].[ModifiedDate] AS [ModifiedDate], [Extent1].[RowVersion] AS [RowVersion], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[CustomerTypeID] END AS [C2], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[InitialDate] END AS [C3], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[PrimaryDesintation] END AS [C4], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[SecondaryDestination] END AS [C5], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[PrimaryActivity] END AS [C6], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[SecondaryActivity] END AS [C7], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[Notes] END AS [C8], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[RowVersion] END AS [C9], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[BirthDate] END AS [C10], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[HeightInches] END AS [C11], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[WeightPounds] END AS [C12], CASE WHEN (([Project1].[C1] = 1) AND ([Project1].[C1] IS NOT NULL)) THEN [Project1].[DietaryRestrictions] END AS [C13] FROM [dbo].[Contact] AS [Extent1] LEFT OUTER JOIN (SELECT [Extent2].[ContactID] AS [ContactID], [Extent2].[BirthDate] AS [BirthDate], [Extent2].[HeightInches] AS [HeightInches], [Extent2].[WeightPounds] AS [WeightPounds], [Extent2].[DietaryRestrictions] AS [DietaryRestrictions], [Extent3].[CustomerTypeID] AS [CustomerTypeID], [Extent3].[InitialDate] AS [InitialDate], [Extent3].[PrimaryDesintation] AS [PrimaryDesintation], [Extent3].[SecondaryDestination] AS [SecondaryDestination], [Extent3].[PrimaryActivity] AS [PrimaryActivity], [Extent3].[SecondaryActivity] AS [SecondaryActivity], [Extent3].[Notes] AS [Notes], [Extent3].[RowVersion] AS [RowVersion], cast(1 as bit) AS [C1] FROM [dbo].[ContactPersonalInfo] AS [Extent2] INNER JOIN [dbo].[Customers] AS [Extent3] ON [Extent2].[ContactID] = [Extent3].[ContactID]) AS [Project1] ON [Extent1].[ContactID] = [Project1].[ContactID] LEFT OUTER JOIN (SELECT TOP (1) [c].[C1] AS [C1] FROM (SELECT [UnionAll3].[C1] AS [C1] FROM (SELECT [UnionAll2].[C1] AS [C1] FROM (SELECT [UnionAll1].[C1] AS [C1] FROM (SELECT 1 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable1] UNION ALL SELECT 2 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable2]) AS [UnionAll1] UNION ALL SELECT 3 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable3]) AS [UnionAll2] UNION ALL SELECT 4 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable4]) AS [UnionAll3] UNION ALL SELECT 5 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable5]) AS [c]) AS [Limit1] ON 1 = 1 LEFT OUTER JOIN (SELECT TOP (1) [c].[C1] AS [C1] FROM (SELECT [UnionAll7].[C1] AS [C1] FROM (SELECT [UnionAll6].[C1] AS [C1] FROM (SELECT [UnionAll5].[C1] AS [C1] FROM (SELECT 1 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable6] UNION ALL SELECT 2 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable7]) AS [UnionAll5] UNION ALL SELECT 3 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable8]) AS [UnionAll6] UNION ALL SELECT 4 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable9]) AS [UnionAll7] UNION ALL SELECT 5 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable10]) AS [c]) AS [Limit2] ON 1 = 1 CROSS JOIN (SELECT MAX([UnionAll12].[C1]) AS [A1] FROM (SELECT [UnionAll11].[C1] AS [C1] FROM (SELECT [UnionAll10].[C1] AS [C1] FROM (SELECT [UnionAll9].[C1] AS [C1] FROM (SELECT 1 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable11] UNION ALL SELECT 2 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable12]) AS [UnionAll9] UNION ALL SELECT 3 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable13]) AS [UnionAll10] UNION ALL SELECT 4 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable14]) AS [UnionAll11] UNION ALL SELECT 5 AS [C1] FROM (SELECT 1 AS X) AS [SingleRowTable15]) AS [UnionAll12]) AS [GroupBy1] WHERE [Extent1].[ContactID] IN ([GroupBy1].[A1], (CASE WHEN ([Limit1].[C1] IS NULL) THEN 0 ELSE [Limit2].[C1] END)) Based on this, is it possible that Linq2Entities provider indeed doesn't execute non-Linq and Linq-to-Object methods, but instead creates equivalent SQL statements for some of them ( and for others it throws an exception )? Thank you in advance

  Read the article

• Streaming desktop with avconv - severe sound issues

  - by Tommy Brunn

  I'm trying to do some live streaming in Ubuntu 12.10, but I'm having some problems with audio. More specifically, the quality is complete garbage and it's at least 10 seconds out of sync with the video. I'm using an excellent guide found here to set up my loopback devices so that I can combine the desktop audio with the microphone input. It seems to work, as I'm able to stream both audio and video to Twitch.tv. But, as I said, the audio quality is terrible. The microphone audio is very, very low, but if I increase it, I get a horrible garbled sound that is absolutely unbearable. Nothing like that is present during VoIP calls or when recording sound alone with the sound recorder, so it's not an issue with the microphone itself. The entire audio stream is also delayed about 10-15 seconds compared to the video stream. I put together an imgur album of my settings. Here is some example output from when I'm streaming: avconv version 0.8.4-6:0.8.4-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Nov 6 2012 16:51:11 with gcc 4.7.2 [x11grab @ 0x162fd80] device: :0.0+570,262 -> display: :0.0 x: 570 y: 262 width: 1280 height: 720 [x11grab @ 0x162fd80] shared memory extension found [x11grab @ 0x162fd80] Estimating duration from bitrate, this may be inaccurate Input #0, x11grab, from ':0.0+570,262': Duration: N/A, start: 1353181686.735113, bitrate: 884736 kb/s Stream #0.0: Video: rawvideo, bgra, 1280x720, 884736 kb/s, 30 tbr, 1000k tbn, 30 tbc [alsa @ 0x163fce0] capture with some ALSA plugins, especially dsnoop, may hang. [alsa @ 0x163fce0] Estimating duration from bitrate, this may be inaccurate Input #1, alsa, from 'pulse': Duration: N/A, start: 1353181686.773841, bitrate: N/A Stream #1.0: Audio: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s Incompatible pixel format 'bgra' for codec 'libx264', auto-selecting format 'yuv420p' [buffer @ 0x1641ec0] w:1280 h:720 pixfmt:bgra [scale @ 0x1642480] w:1280 h:720 fmt:bgra -> w:852 h:480 fmt:yuv420p flags:0x4 [libx264 @ 0x165ae80] VBV maxrate unspecified, assuming CBR [libx264 @ 0x165ae80] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x165ae80] profile Main, level 3.1 [libx264 @ 0x165ae80] 264 - core 123 r2189 35cf912 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=2 deblock=1:0:0 analyse=0x1:0x111 me=hex subme=6 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=1 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=4 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=0 b_adapt=1 b_bias=0 direct=1 weightb=0 open_gop=1 weightp=1 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=30 rc=cbr mbtree=1 bitrate=712 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=712 vbv_bufsize=512 nal_hrd=none ip_ratio=1.25 aq=1:1.00 Output #0, flv, to 'rtmp://live.justin.tv/app/live_23011330_Pt1plSRM0z5WVNJ0QmCHvTPmpUnfC4': Metadata: encoder : Lavf53.21.0 Stream #0.0: Video: libx264, yuv420p, 852x480, q=-1--1, 712 kb/s, 1k tbn, 30 tbc Stream #0.1: Audio: libmp3lame, 44100 Hz, 2 channels, s16, 712 kb/s Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Stream #1:0 -> #0:1 (pcm_s16le -> libmp3lame) Press ctrl-c to stop encoding frame= 17 fps= 0 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 32 fps= 31 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 40 fps= 23 q=29.0 size= 44kB time=0.03 bitrate=13786.2kbits/s dup=frame= 47 fps= 21 q=31.0 size= 93kB time=2.73 bitrate= 277.7kbits/s dup=0frame= 62 fps= 23 q=29.0 size= 160kB time=3.23 bitrate= 406.2kbits/s dup=0frame= 77 fps= 24 q=23.0 size= 209kB time=3.71 bitrate= 462.5kbits/s dup=0frame= 92 fps= 25 q=20.0 size= 267kB time=4.91 bitrate= 445.2kbits/s dup=0frame= 107 fps= 25 q=20.0 size= 318kB time=5.41 bitrate= 482.1kbits/s dup=0frame= 123 fps= 26 q=18.0 size= 368kB time=5.96 bitrate= 505.7kbits/s dup=0frame= 139 fps= 26 q=16.0 size= 419kB time=6.48 bitrate= 529.7kbits/s dup=0frame= 155 fps= 27 q=15.0 size= 473kB time=7.00 bitrate= 553.6kbits/s dup=0frame= 170 fps= 27 q=14.0 size= 525kB time=7.52 bitrate= 571.7kbits/s dup=0 frame= 180 fps= 25 q=-1.0 Lsize= 652kB time=7.97 bitrate= 670.0kbits/s dup=0 drop=32 //Here I stop the streaming video:531kB audio:112kB global headers:0kB muxing overhead 1.345945% [libx264 @ 0x165ae80] frame I:1 Avg QP:30.43 size: 39748 [libx264 @ 0x165ae80] frame P:45 Avg QP:11.37 size: 11110 [libx264 @ 0x165ae80] frame B:134 Avg QP:15.93 size: 27 [libx264 @ 0x165ae80] consecutive B-frames: 0.6% 0.0% 1.7% 97.8% [libx264 @ 0x165ae80] mb I I16..4: 7.3% 0.0% 92.7% [libx264 @ 0x165ae80] mb P I16..4: 0.1% 0.0% 0.1% P16..4: 49.1% 1.2% 2.1% 0.0% 0.0% skip:47.4% [libx264 @ 0x165ae80] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.1% 0.0% 0.0% direct: 0.0% skip:99.9% L0:42.5% L1:56.9% BI: 0.6% [libx264 @ 0x165ae80] coded y,uvDC,uvAC intra: 82.3% 87.4% 71.9% inter: 7.1% 8.4% 7.0% [libx264 @ 0x165ae80] i16 v,h,dc,p: 27% 29% 16% 28% [libx264 @ 0x165ae80] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 21% 14% 8% 8% 8% 7% 5% 7% [libx264 @ 0x165ae80] i8c dc,h,v,p: 47% 22% 20% 11% [libx264 @ 0x165ae80] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0x165ae80] ref P L0: 96.4% 3.6% [libx264 @ 0x165ae80] kb/s:474.19 Received signal 2: terminating. Any ideas on how I can resolve this? The video delay is perfectly acceptable, so I wouldn't think that it's a network issue that's causing the delay in the audio. Any help would be appreciated.

  Read the article

• Exadata Parameter _AUTO_MANAGE_EXADATA_DISKS

  - by AVargas

  Normal 0 false false false EN-US X-NONE HE MicrosoftInternetExplorer4 DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267" UnhideWhenUsed="false" QFormat="true" Name="Normal"/ UnhideWhenUsed="false" QFormat="true" Name="heading 1"/ UnhideWhenUsed="false" QFormat="true" Name="Title"/ UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/ UnhideWhenUsed="false" QFormat="true" Name="Strong"/ UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/ UnhideWhenUsed="false" Name="Table Grid"/ UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/ UnhideWhenUsed="false" Name="Light Shading"/ UnhideWhenUsed="false" Name="Light List"/ UnhideWhenUsed="false" Name="Light Grid"/ UnhideWhenUsed="false" Name="Medium Shading 1"/ UnhideWhenUsed="false" Name="Medium Shading 2"/ UnhideWhenUsed="false" Name="Medium List 1"/ UnhideWhenUsed="false" Name="Medium List 2"/ UnhideWhenUsed="false" Name="Medium Grid 1"/ UnhideWhenUsed="false" Name="Medium Grid 2"/ UnhideWhenUsed="false" Name="Medium Grid 3"/ UnhideWhenUsed="false" Name="Dark List"/ UnhideWhenUsed="false" Name="Colorful Shading"/ UnhideWhenUsed="false" Name="Colorful List"/ UnhideWhenUsed="false" Name="Colorful Grid"/ UnhideWhenUsed="false" Name="Light Shading Accent 1"/ UnhideWhenUsed="false" Name="Light List Accent 1"/ UnhideWhenUsed="false" Name="Light Grid Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/ UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/ UnhideWhenUsed="false" QFormat="true" Name="Quote"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/ UnhideWhenUsed="false" Name="Dark List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/ UnhideWhenUsed="false" Name="Colorful List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/ UnhideWhenUsed="false" Name="Light Shading Accent 2"/ UnhideWhenUsed="false" Name="Light List Accent 2"/ UnhideWhenUsed="false" Name="Light Grid Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/ UnhideWhenUsed="false" Name="Dark List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/ UnhideWhenUsed="false" Name="Colorful List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/ UnhideWhenUsed="false" Name="Light Shading Accent 3"/ UnhideWhenUsed="false" Name="Light List Accent 3"/ UnhideWhenUsed="false" Name="Light Grid Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/ UnhideWhenUsed="false" Name="Dark List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/ UnhideWhenUsed="false" Name="Colorful List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/ UnhideWhenUsed="false" Name="Light Shading Accent 4"/ UnhideWhenUsed="false" Name="Light List Accent 4"/ UnhideWhenUsed="false" Name="Light Grid Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/ UnhideWhenUsed="false" Name="Dark List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/ UnhideWhenUsed="false" Name="Colorful List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/ UnhideWhenUsed="false" Name="Light Shading Accent 5"/ UnhideWhenUsed="false" Name="Light List Accent 5"/ UnhideWhenUsed="false" Name="Light Grid Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/ UnhideWhenUsed="false" Name="Dark List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/ UnhideWhenUsed="false" Name="Colorful List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/ UnhideWhenUsed="false" Name="Light Shading Accent 6"/ UnhideWhenUsed="false" Name="Light List Accent 6"/ UnhideWhenUsed="false" Name="Light Grid Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/ UnhideWhenUsed="false" Name="Dark List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/ UnhideWhenUsed="false" Name="Colorful List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Book Title"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} Exadata auto disk management is controlled by the parameter _AUTO_MANAGE_EXADATA_DISKS. The default value for this parameter is TRUE.When _AUTO_MANAGE_EXADATA_DISKS is enabled, Exadata automate the following disk operations:If a griddisk becomes unavailable/available, ASM will OFFLINE/ONLINE it.If a physicaldisk fails or its status change to predictive failure, for all griddisks built on it ASM will DROP FORCE the failed ones and DROP the ones with predictive failures.If a flashdisk performance degrades, if there are griddisks built on it, they will be DROPPED FORCE in ASM.If a physicaldisk is replaced, the celldisk and griddisks will be recreated and the griddisks will be automatically ADDED in ASM, if they were automatically dropped by ASM. If you manually drop the disks, that will not happen.If a NORMAL, ONLINE griddisk is manually dropped, FORCE option should not be used, otherwise the disk will be automatically added back in ASM. If a gridisk is inactivated, ASM will automatically OFFLINE it.If a gridisk is activated, ASM will automatically ONLINED it. There are some error conditions that may require to temporarily disable _AUTO_MANAGE_EXADATA_DISKS.Details on MOS 1408865.1 - Exadata Auto Disk Management Add disk failing and ASM Rebalance interrupted with error ORA-15074. Immediately after taking care of the problem _AUTO_MANAGE_EXADATA_DISKS should be set back to its default value of TRUE. Full details on Auto disk management feature in Exadata (Doc ID 1484274.1)

  Read the article

• problem with loading in .FBX meshes in DirectX 10

  - by N0xus

  I'm trying to load in meshes into DirectX 10. I've created a bunch of classes that handle it and allow me to call in a mesh with only a single line of code in my main game class. How ever, when I run the program this is what renders: In the debug output window the following errors keep appearing: D3D10: ERROR: ID3D10Device::DrawIndexed: Input Assembler - Vertex Shader linkage error: Signatures between stages are incompatible. The reason is that Semantic 'TEXCOORD' is defined for mismatched hardware registers between the output stage and input stage. [ EXECUTION ERROR #343: DEVICE_SHADER_LINKAGE_REGISTERINDEX ] D3D10: ERROR: ID3D10Device::DrawIndexed: Input Assembler - Vertex Shader linkage error: Signatures between stages are incompatible. The reason is that the input stage requires Semantic/Index (POSITION,0) as input, but it is not provided by the output stage. [ EXECUTION ERROR #342: DEVICE_SHADER_LINKAGE_SEMANTICNAME_NOT_FOUND ] The thing is, I've no idea how to fix this. The code I'm using does work and I've simply brought all of that code into a new project of mine. There are no build errors and this only appears when the game is running The .fx file is as follows: float4x4 matWorld; float4x4 matView; float4x4 matProjection; struct VS_INPUT { float4 Pos:POSITION; float2 TexCoord:TEXCOORD; }; struct PS_INPUT { float4 Pos:SV_POSITION; float2 TexCoord:TEXCOORD; }; Texture2D diffuseTexture; SamplerState diffuseSampler { Filter = MIN_MAG_MIP_POINT; AddressU = WRAP; AddressV = WRAP; }; // // Vertex Shader // PS_INPUT VS( VS_INPUT input ) { PS_INPUT output=(PS_INPUT)0; float4x4 viewProjection=mul(matView,matProjection); float4x4 worldViewProjection=mul(matWorld,viewProjection); output.Pos=mul(input.Pos,worldViewProjection); output.TexCoord=input.TexCoord; return output; } // // Pixel Shader // float4 PS(PS_INPUT input ) : SV_Target { return diffuseTexture.Sample(diffuseSampler,input.TexCoord); //return float4(1.0f,1.0f,1.0f,1.0f); } RasterizerState NoCulling { FILLMODE=SOLID; CULLMODE=NONE; }; technique10 Render { pass P0 { SetVertexShader( CompileShader( vs_4_0, VS() ) ); SetGeometryShader( NULL ); SetPixelShader( CompileShader( ps_4_0, PS() ) ); SetRasterizerState(NoCulling); } } In my game, the .fx file and model are called and set as follows: Loading in shader file //Set the shader flags - BMD DWORD dwShaderFlags = D3D10_SHADER_ENABLE_STRICTNESS; #if defined( DEBUG ) || defined( _DEBUG ) dwShaderFlags |= D3D10_SHADER_DEBUG; #endif ID3D10Blob * pErrorBuffer=NULL; if( FAILED( D3DX10CreateEffectFromFile( TEXT("TransformedTexture.fx" ), NULL, NULL, "fx_4_0", dwShaderFlags, 0, md3dDevice, NULL, NULL, &m_pEffect, &pErrorBuffer, NULL ) ) ) { char * pErrorStr = ( char* )pErrorBuffer->GetBufferPointer(); //If the creation of the Effect fails then a message box will be shown MessageBoxA( NULL, pErrorStr, "Error", MB_OK ); return false; } //Get the technique called Render from the effect, we need this for rendering later on m_pTechnique=m_pEffect->GetTechniqueByName("Render"); //Number of elements in the layout UINT numElements = TexturedLitVertex::layoutSize; //Get the Pass description, we need this to bind the vertex to the pipeline D3D10_PASS_DESC PassDesc; m_pTechnique->GetPassByIndex( 0 )->GetDesc( &PassDesc ); //Create Input layout to describe the incoming buffer to the input assembler if (FAILED(md3dDevice->CreateInputLayout( TexturedLitVertex::layout, numElements,PassDesc.pIAInputSignature, PassDesc.IAInputSignatureSize, &m_pVertexLayout ) ) ) { return false; } model loading: m_pTestRenderable=new CRenderable(); //m_pTestRenderable->create<TexturedVertex>(md3dDevice,8,6,vertices,indices); m_pModelLoader = new CModelLoader(); m_pTestRenderable = m_pModelLoader->loadModelFromFile( md3dDevice,"armoredrecon.fbx" ); m_pGameObjectTest = new CGameObject(); m_pGameObjectTest->setRenderable( m_pTestRenderable ); // Set primitive topology, how are we going to interpet the vertices in the vertex buffer md3dDevice->IASetPrimitiveTopology( D3D10_PRIMITIVE_TOPOLOGY_TRIANGLELIST ); if ( FAILED( D3DX10CreateShaderResourceViewFromFile( md3dDevice, TEXT( "armoredrecon_diff.png" ), NULL, NULL, &m_pTextureShaderResource, NULL ) ) ) { MessageBox( NULL, TEXT( "Can't load Texture" ), TEXT( "Error" ), MB_OK ); return false; } m_pDiffuseTextureVariable = m_pEffect->GetVariableByName( "diffuseTexture" )->AsShaderResource(); m_pDiffuseTextureVariable->SetResource( m_pTextureShaderResource ); Finally, the draw function code: //All drawing will occur between the clear and present m_pViewMatrixVariable->SetMatrix( ( float* )m_matView ); m_pWorldMatrixVariable->SetMatrix( ( float* )m_pGameObjectTest->getWorld() ); //Get the stride(size) of the a vertex, we need this to tell the pipeline the size of one vertex UINT stride = m_pTestRenderable->getStride(); //The offset from start of the buffer to where our vertices are located UINT offset = m_pTestRenderable->getOffset(); ID3D10Buffer * pVB=m_pTestRenderable->getVB(); //Bind the vertex buffer to input assembler stage - md3dDevice->IASetVertexBuffers( 0, 1, &pVB, &stride, &offset ); md3dDevice->IASetIndexBuffer( m_pTestRenderable->getIB(), DXGI_FORMAT_R32_UINT, 0 ); //Get the Description of the technique, we need this in order to loop through each pass in the technique D3D10_TECHNIQUE_DESC techDesc; m_pTechnique->GetDesc( &techDesc ); //Loop through the passes in the technique for( UINT p = 0; p < techDesc.Passes; ++p ) { //Get a pass at current index and apply it m_pTechnique->GetPassByIndex( p )->Apply( 0 ); //Draw call md3dDevice->DrawIndexed(m_pTestRenderable->getNumOfIndices(),0,0); //m_pD3D10Device->Draw(m_pTestRenderable->getNumOfVerts(),0); } Is there anything I've clearly done wrong or are missing? Spent 2 weeks trying to workout what on earth I've done wrong to no avail. Any insight a fresh pair eyes could give on this would be great.

  Read the article

• Integration Patterns with Azure Service Bus Relay, Part 2: Anonymous full-trust .NET consumer

  - by Elton Stoneman

  This is the second in the IPASBR series, see also: Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service Part 2 is nice and easy. From Part 1 we exposed our service over the Azure Service Bus Relay using the netTcpRelayBinding and verified we could set up our network to listen for relayed messages. Assuming we want to consume that service in .NET from an environment which is fairly unrestricted for us, but quite restricted for attackers, we can use netTcpRelay and shared secret authentication. Pattern applicability This is a good fit for scenarios where: the consumer can run .NET in full trust the environment does not restrict use of external DLLs the runtime environment is secure enough to keep shared secrets the service does not need to know who is consuming it the service does not need to know who the end-user is So for example, the consumer is an ASP.NET website sitting in a cloud VM or Azure worker role, where we can keep the shared secret in web.config and we don't need to flow any identity through to the on-premise service. The service doesn't care who the consumer or end-user is - say it's a reference data service that provides a list of vehicle manufacturers. Provided you can authenticate with ACS and have access to Service Bus endpoint, you can use the service and it doesn't care who you are. In this post, we’ll consume the service from Part 1 in ASP.NET using netTcpRelay. The code for Part 2 (+ Part 1) is on GitHub here: IPASBR Part 2 Authenticating and authorizing with ACS In this scenario the consumer is a server in a controlled environment, so we can use a shared secret to authenticate with ACS, assuming that there is governance around the environment and the codebase which will prevent the identity being compromised. From the provider's side, we will create a dedicated service identity for this consumer, so we can lock down their permissions. The provider controls the identity, so the consumer's rights can be revoked. We'll add a new service identity for the namespace in ACS , just as we did for the serviceProvider identity in Part 1. I've named the identity fullTrustConsumer. We then need to add a rule to map the incoming identity claim to an outgoing authorization claim that allows the identity to send messages to Service Bus (see Part 1 for a walkthrough creating Service Idenitities): Issuer: Access Control Service Input claim type: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier Input claim value: fullTrustConsumer Output claim type: net.windows.servicebus.action Output claim value: Send This sets up a service identity which can send messages into Service Bus, but cannot register itself as a listener, or manage the namespace. Adding a Service Reference The Part 2 sample client code is ready to go, but if you want to replicate the steps, you’re going to add a WSDL reference, add a reference to Microsoft.ServiceBus and sort out the ServiceModel config. In Part 1 we exposed metadata for our service, so we can browse to the WSDL locally at: http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc?wsdl If you add a Service Reference to that in a new project you'll get a confused config section with a customBinding, and a set of unrecognized policy assertions in the namespace http://schemas.microsoft.com/netservices/2009/05/servicebus/connect. If you NuGet the ASB package (“windowsazure.servicebus”) first and add the service reference - you'll get the same messy config. Either way, the WSDL should have downloaded and you should have the proxy code generated. You can delete the customBinding entries and copy your config from the service's web.config (this is already done in the sample project in Sixeyed.Ipasbr.NetTcpClient), specifying details for the client:     <client>       <endpoint address="sb://sixeyed-ipasbr.servicebus.windows.net/net"                 behaviorConfiguration="SharedSecret"                 binding="netTcpRelayBinding"                 contract="FormatService.IFormatService" />     </client>     <behaviors>       <endpointBehaviors>         <behavior name="SharedSecret">           <transportClientEndpointBehavior credentialType="SharedSecret">             <clientCredentials>               <sharedSecret issuerName="fullTrustConsumer"                             issuerSecret="E3feJSMuyGGXksJi2g2bRY5/Bpd2ll5Eb+1FgQrXIqo="/>             </clientCredentials>           </transportClientEndpointBehavior>         </behavior>       </endpointBehaviors>     </behaviors>   The proxy is straight WCF territory, and the same client can run against Azure Service Bus through any relay binding, or directly to the local network service using any WCF binding - the contract is exactly the same. The code is simple, standard WCF stuff: using (var client = new FormatService.FormatServiceClient()) { outputString = client.ReverseString(inputString); } Running the sample First, update Solution Items\AzureConnectionDetails.xml with your service bus namespace, and your service identity credentials for the netTcpClient and the provider:   <!-- ACS credentials for the full trust consumer (Part2): -->   <netTcpClient identityName="fullTrustConsumer"                 symmetricKey="E3feJSMuyGGXksJi2g2bRY5/Bpd2ll5Eb+1FgQrXIqo="/> Then rebuild the solution and verify the unit tests work. If they’re green, your service is listening through Azure. Check out the client by navigating to http://localhost:53835/Sixeyed.Ipasbr.NetTcpClient. Enter a string and hit Go! - your string will be reversed by your on-premise service, routed through Azure: Using shared secret client credentials in this way means ACS is the identity provider for your service, and the claim which allows Send access to Service Bus is consumed by Service Bus. None of the authentication details make it through to your service, so your service is not aware who the consumer is (MSDN calls this "anonymous authentication").

  Read the article

• RDA Health Checks for SOA

  - by ShawnBailey

  What is a health check in RDA? A health check evaluates something in your environment to determine whether a change needs to be considered in order to avoid a problem or optimize fuctionality. Examples of what this 'something' might be are: Configuration Parameters JVM Options Runtime Statistics What have we done for SOA? In the latest release of RDA, 4.30, we have added a Rule Set for SOA called 'Oracle SOA 11g (11.1.1) Post Installation (Generic)'. This Rule Set contains 14 SOA related health checks. These checks were all derived from common issues / solutions we see in support of the SOA product. Many of the recommendations come from the product documentation while others are covered in the SOA Knowledge Base. Our goal is that you will be able to easily identify the areas of concern and understand the guidance available from the output of the Rule Set. Running the health checks for SOA The rules that the checks use are installed with RDA and bundled by product or functional area into what are called 'Rule Sets'. To view the available Rule Sets simply run the command from the RDA home location: rda.cmd (or .sh) -dT hcve This will bring up a list of the available HCVE (Health Check / Verification Engine) Rule Sets. Each Rule Set contains a group of related rules that are used for evalutation and display of results. A rule can be considered synonymous with a single health check and they are assigned an ID, Name and Description that can be seen when they are executed. The Rule Set for SOA is option number 11 and you just enter this selection at the prompt. The Rule Set will then execute to completion. After running an HCVE Rule Set the tool will write the output to the RDA_HOME/output folder. The simplest way to view the output is to drag the .htm file to a browser but of course it can also be uploaded to a Service Request for evaluation by Oracle Support. Many of the Rule Sets will prompt you for information before they can execute their rules but the SOA Rule Set will identify the SOA domains configured in your RDA setup.cfg file. This means that you don't need to answer all of the questions again about where stuff is but it also means that you must have configured RDA for SOA. To run the Rule Set: Download the latest version of RDA from MOS Doc ID 314422.1 Configure RDA for your SOA domains. Detailed steps can be found here In it's simplest form the command is 'rda.cmd (.sh) -S SOA' Go to the RDA home location and enter the command 'rda.cmd (or .sh) -dT hcve' Select option '11' It should be noted that this our first release of a SOA Rule Set so there will probably be some things we need to clean up or fix. None of these rules will actually modify anything on your system as they are read only and do the evaluations internally. Please let us know if you have any issues with the rules or ideas for new ones so we can make them as useful as possible. The Checks Here is a list of the SOA health checks by ID, Name and Description. ID Name Description A00100 SOA Domain Homes Lists the SOA domains that were indentified from the RDA setup.cfg file A00200 Coherence Protocol Conflict Checks to see if you have both Unicast and Multicast configured in the same domain. Checks both the setDomainEnv and config.xml entries (if it exists). We recommend Unicast with fully qualified host names or IP addresses. A00210 Coherence Fully Qualified Host Checks that the host names are fully qualified or that IP addresses are used. Will fail if unqualified host names are detected. A00220 Unicast Local Host Checks that the Coherence localhost is specified for use with Unicast A00300 JTA Timeout Checks that the JTA timeout is configured for the domain and lists the value. The bundled rule will only list the current values of the JTA timeout for each SOA Domain. In the future the rule with fail with a warning if the value is 300 seconds or lower. It is recommended that timeouts follow the pattern 'syncMaxWaitTime' < EJB Timeouts < JTA Timeout. The 300 second value is important because the EJB Timeouts default to 300 seconds. Additional information can be found in MOS Doc ID 880313.1. A00310 XA Max Time Checks that the JTA Maximum XA call time is set for the domain. Fails if it is not explicitly set or if the value is less than or equal to the default of 12000 ms. A00320 XA Timeout Checks that the XA timeout is enabled and that the value is '0' for the SOA Data Source (SOADataSource-jdbc.xml) A00330 JDBC Statement Timeout Checks that the Statement Timeout is set for all SOA Data Sources. Fails if the value is not set or if it is set to the default of -1. A00400 XA Driver Checks that the SOA Data Source is configured to use an XA driver. Fails if it is not. A00410 JDBC Capacity Settings Checks that the minimum and maximum capacity are equal for all SOA Data Sources. Fails if they are not and lists specifically which data sources failed. A00500 SOA Roles Checks that the default SOA roles 'SOAAdmin' and 'SOAOperator' are configured for the soa-infra application in the file sytem-jazn-data.xml. Fails if they are not. A00700 SOA-INFRA Deployment Checks that the soa-infra application is deployed to either a cluster, all members of a cluster or a stand alone server. A00710 SOA Deployments Checks that the SOA related applications are deployed to the same domain members as soa-infra. A00720 SOA Library Deployments Checks that the SOA related libraries are deployed to the same domain members as soa-infra. A00730 Data Source Deployments Checks that the SOA Data Sources are all targeted to the same domain members as soa-infra

  Read the article

• Row Count Plus Transformation

  As the name suggests we have taken the current Row Count Transform that is provided by Microsoft in the Integration Services toolbox and we have recreated the functionality and extended upon it. There are two things about the current version that we thought could do with cleaning up Lack of a custom UI You have to type the variable name yourself In the Row Count Plus Transformation we solve these issues for you. Another thing we thought was missing is the ability to calculate the time taken between components in the pipeline. An example usage would be that you want to know how many rows flowed between Component A and Component B and how long it took. Again we have solved this issue. Credit must go to Erik Veerman of Solid Quality Learning for the idea behind noting the duration. We were looking at one of his packages and saw that he was doing something very similar but he was using a Script Component as a transformation. Our philosophy is that if you have to write or Copy and Paste the same piece of code more than once then you should be thinking about a custom component and here it is. The Row Count Plus Transformation populates variables with the values returned from; Counting the rows that have flowed through the path Returning the time in seconds between when it first saw a row come down this path and when it saw the final row. It is possible to leave both these boxes blank and the component will still work.   All input columns are passed through the transformation unaltered, you are not permitted to change or add to the inputs or outputs of this component. Optionally you can set the component to fire an event, which happens during the PostExecute phase of the execution. This can be useful to improve visibility of this information, such that it is captured in package logging, or can be used to drive workflow in the case of an error event. Properties Property Data Type Description OutputRowCountVariable String The name of the variable into which the amount of row read will be passed (Optional). OutputDurationVariable String The name of the variable into which the duration in seconds will be passed. (Optional). EventType RowCountPlusTransform.EventType The type of event to fire during post execute, included in which are the row count and duration values. RowCountPlusTransform.EventType Enumeration Name Value Description None 0 Do not fire any event. Information 1 Fire an Information event. Warning 2 Fire a Warning event. Error 3 Fire an Error event. Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. For 2005/2008 Only - Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Row Count Plus Transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations, and this component requires a minimum of SQL Server 2005 Service Pack 1. Downloads The Row Number Transformation is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Row Count Plus Transformation for SQL Server 2005 Row Count Plus Transformation for SQL Server 2008 Row Count Plus Transformation for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.6 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.5 - SQL Server 2008 release. (15 Oct 2008) SQL Server 2005 Version 1.1.0.43 - Bug fix for duration. For long running processes the duration second count may have been incorrect. (8 Sep 2006) Version 1.1.0.42 - SP1 Compatibility Testing. Added the ability to raise an event with the count and duration data for easier logging or workflow. (18 Jun 2006) Version 1.0.0.1 - SQL Server 2005 RTM. Made available as general public release. (20 Mar 2006) Screenshot Troubleshooting Make sure you have downloaded the version that matches your version of SQL Server. We offer separate downloads for SQL Server 2005, SQL Server 2008 and SQL Server 2012. If you get an error when you try and use the component along the lines of The component could not be added to the Data Flow task. Please verify that this component is properly installed.  ... The data flow object "Konesans ..." is not installed correctly on this computer, this usually indicates that the internal cache of SSIS components needs to be updated. This is held by the SSIS service, so you need restart the the SQL Server Integration Services service. You can do this from the Services applet in Control Panel or Administrative Tools in Windows. You can also restart the computer if you prefer. You may also need to restart any current instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Once installation is complete you need to manually add the task to the toolbox before you will see it and to be able add it to packages - How do I install a task or transform component?

  Read the article

• Need help with testdisk output

  - by dan

  I had (note the past tense) an ubuntu 12.04 system with separate partitions for the base and /home directories. It started acting wonky, so I decided to do a reinstall with 12.10, intending just to do a reinstall to the base partition. After several seconds, I realize that the installer was repartitioning the drive and reinstalling, so I pulled the power cord. I'm now trying to recover as much as I can with testdisk, but it seems that testdisk is finding 100 unique partitions when I run it - they mostly tend to be HFS+ or solaris /home (which I think is just an ext4; I've never had solaris on the machine). I've pasted an abbreviated version of the testdisk output below (first ~100 lines, and then ~100 lines from the middle of the output). Is there a way to combine or recreate the partitions and then data recovery, or some other way maximize what I can recover (ideally as much of the file system as possible)? I really only care about what was in the /home directory - I'd rather not use photorec since I don't have another 2 TB HD lying around to recover to. Thanks, Dan Mon Dec 10 06:03:00 2012 Command line: TestDisk TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org OS: Linux, kernel 3.2.34-std312-amd64 (#2 SMP Sat Nov 17 08:06:32 UTC 2012) x86_64 Compiler: GCC 4.4 Compilation date: 2012-11-27T22:44:52 ext2fs lib: 1.42.6, ntfs lib: libntfs-3g, reiserfs lib: 0.3.1-rc8, ewf lib: none /dev/sda: LBA, HPA, LBA48, DCO support /dev/sda: size 3907029168 sectors /dev/sda: user_max 3907029168 sectors /dev/sda: native_max 3907029168 sectors Warning: can't get size for Disk /dev/mapper/control - 0 B - CHS 1 1 1, sector size=512 /dev/sr0 is not an ATA disk Hard disk list Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63, sector size=512 - WDC WD20EARS-00J2GB0, S/N:WD-WCAYY0075071, FW:80.00A80 Disk /dev/sdb - 1013 MB / 967 MiB - CHS 1014 32 61, sector size=512 - Generic Flash Disk, FW:8.07 Disk /dev/sr0 - 367 MB / 350 MiB - CHS 179470 1 1 (RO), sector size=2048 - PLDS DVD+/-RW DH-16AAS, FW:JD12 Partition table type (auto): Intel Disk /dev/sda - 2000 GB / 1863 GiB - WDC WD20EARS-00J2GB0 Partition table type: EFI GPT Analyse Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 Current partition structure: Bad GPT partition, invalid signature. search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB Results P MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB P Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB interface_write() 1 P MS Data 2048 3900753919 3900751872 2 P Linux Swap 3900755968 3907028975 6273008 search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14584, s_mnt_count=0/27, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 477915164 recover_EXT2: part_size 3823321312 MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB block_group_nr 1 ....snip...... MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 4096 3823325407 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 7028840 7033383 4544 FAT12, 2326 KB / 2272 KiB Mac HFS 67856948 67862179 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67862176 67867407 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67862244 67867475 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67867404 67872635 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67867472 67872703 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67872700 67877931 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67937834 67948067 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67938012 67948155 10144 HFS+ found using backup sector!, 5193 KB / 5072 KiB Mac HFS 67948064 67958297 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67948070 67958303 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67948152 67958295 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958292 67968435 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958300 67968533 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67992596 67997827 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67997824 68003055 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67997892 68003123 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 68003052 68008283 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68003120 68008351 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68008348 68013579 5232 HFS+, 2678 KB / 2616 KiB Solaris /home 84429840 123499141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84429952 123499253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493136 123562437 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493248 123562549 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566088 123635389 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566200 123635501 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571232 123640533 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571344 123640645 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84659952 123729253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84660064 123729365 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690504 123759805 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690616 123759917 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700424 123769725 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700536 123769837 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797720 123867021 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797832 123867133 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812544 123881845 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812656 123881957 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824552 123893853 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824664 123893965 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847528 123916829 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847640 123916941 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886840 123956141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886952 123956253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945488 124014789 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945600 124014901 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84957992 124027293 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84958104 124027405 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962240 124031541 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962352 124031653 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977168 124046469 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977280 124046581 39069302 UFS1, 20 GB / 18 GiB MS Data 174395467 178483851 4088385 ..... snip (it keeps going on for quite a while)

  Read the article

• 12c??? - Active Data Guard Far Sync

  - by Jian Zhang(??)

  ?? ================ Active Data Guard Far Sync?Oracle 12c????(???Far Sync Standby),Far Sync?????????????(Primary Database)?????????Far Sync??,??(Primary Database) ??(synchronous)??redo?Far Sync??,??Far Sync????redo??(asynchronous)???????(Standby Database)???????????????????????Far Sync????????,init?????????,???????? ??redo ????Maximum Availability??,???????????(Primary Database)?????????Far Sync??,??(Primary Database)??(synchronous)??redo?Far Sync??,???????(zero data loss),?????Far Sync????,??????,??????????????Far Sync????redo??(asynchronous)???????(Standby Database)? ??redo ????Maximum Performance??,???????????(Primary Database)?????????Far Sync??,??(Primary Database) ????redo?Far Sync??,??Far Sync???????redo?????????(Standby Database)????????????????(Standby Database)??redo???(offload)? Far Sync????Data Guard ????(role transitions)????,?switchover/failover?????12c????? ???????Data Guard ????,?switchover/failover,???????????????Far Sync??,??Far Sync???????????????????? ???Far Sync???????,??????????????2?Far Sync??,???????? ???????Far Sync????? Far Sync??? ================ ????Far Sync ================ 1. ??Data Guard,???11.2??,??????«Active Database Duplication for A standby database» 2. ????Far Sync??,Far Sync????????,init?????????,???????? ??Far Sync???????,?????: SQL> ALTER DATABASE CREATE FAR SYNC INSTANCE CONTROLFILE AS '/tmp/controlfs01.ctl'; 3. ????redo?????Far Sync??,????LOG_ARCHIVE_DEST_2??: LOG_ARCHIVE_DEST_2='SERVICE=dg12cfs SYNC AFFIRM MAX_FAILURE=1 ALTERNATE=LOG_ARCHIVE_DEST_3 VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=dg12cfs' 4. ??Far Sync??????redo???,??Far Sync??LOG_ARCHIVE_DEST_2??: LOG_ARCHIVE_DEST_2='SERVICE=dg12cs ASYNC VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=dg12cs' 5. ????Far Sync???????,??????????????2?Far Sync??? 6. ???????: SQL> select * from  V$DATAGUARD_CONFIG; DB_UNIQUE_NAME       PARENT_DBUN       DEST_ROLE         CURRENT_SCN     CON_ID ------------------------------ ------------------------------     ----------------- ----------- ---------- dg12cfs                        dg12cp          FAR SYNC INSTANCE      682995          0 dg12cs                         dg12cfs         PHYSICAL STANDBY       682995          0 dg12cp                        NONE             PRIMARY DATABASE      683138          0 ????????????????:Oracle_12c_Active_Data_Guard_Far_Sync_v1.pdf

  Read the article

• Making your ASP.NET/HTML Websites Indic aware &ndash; accepting Tamil, Telugu, Kannada, Hindi and ot

  - by Harish Ranganathan

  Its been a month since I wrote my last post.  Much of work has been happening around planning for Tech Ed India, the upcoming Virtual TechDays this week as well as our Developer content at the Great Indian Developer Summit 2010.  Its going to be one exciting period starting this week and I am glad I would be able to meet a lot of folks who have written to me personally that they would like to catch up at Tech Ed India. For now, I had a chance to meet the Microsoft India Development Centre team that worked on the Microsoft Indic Language Input Tool (erstwhile Akshara). The team updated me that they have also released the scripts  so that the Indic input feature can be encapsulated into your own websites.  For example, if you are having a web page where you collect user information, you can pretty much make your site indic aware i.e. accept inputs in Tamil, Telugu, Kannada, Hindi etc.,  All you would need to include would be a bunch of scripts onto your web pages and you are ready to make it, like I said, “indic aware” I have built a sample web page that accepts First Name, Last Name, Address and an additional field.  When it comes to accepting indic, sometimes, you may want to avoid the indic input in certain fields and accept it in English.  You can specify the MicrosoftILITWebAttach="false" attribute to the Text Boxes and Text Areas (TextMode=”Multiline” in ASP.NET) so that the particular field automatically switches over to English input.  Similarly, the moment you specify that the TextMode=”Password” to make it as a password field, it automatically ignores all indic recognition and shows the masked dots for the words entered. Note that, this is, when we are going for the Opt-out mode, where we are specifying that by default all the input controls would need indic awareness and we would specify for those controls where it is not required.  The other mode is Opt-in mode where you would need to add a different property to the script definition i.e. attachMode=”optin” .  When we do this, we need to explicitly add the MicrosoftILITWebAttach="true" attribute for every control where we need indic input. I have created a sample web page which accepts First Name, Last Name, Address and an additional input field to demonstrate the “Opt-out”.   You can copy paste this into any of your web pages to check it <form id="form1" runat="server">     <!-- Microsoft Indic Language Input Tool embed code --> <input type="hidden" id="MicrosoftILITWebEmbedInfo" attachMode="optout" value="" /> <script type="text/javascript" src="http://ilit.microsoft.com/bookmarklet/script/Tamil.js" defer="defer"></script>     <div>     <h2>         Welcome to the Registration Page     </h2>     <p>         First Name: <asp:TextBox runat="server" ID="txtFirstName" />         <br />         <br />         Last Name: <asp:TextBox runat="server" ID="txtLastName" />         <br />         <br />         Password:         <asp:TextBox runat="server" ID="txtPassword" TextMode="Password" />         <br />         <br />         Address: <asp:TextBox runat="server" ID="txtAddress" TextMode="MultiLine" Height="100" Width="200" />         <br />         <br />         English Text: <asp:TextBox ID="txtEnglishText" runat="server" MicrosoftILITWebAttach="false" />     </p>     <p>         <!-- Microsoft Indic Language Input Tool attribution image link --> <a style="text-decoration: none" href="http://go.microsoft.com/fwlink/?LinkID=184205&clcid=0x409"><img style="border: 0px" alt="Transliteration by Microsoft" src="http://ilit.microsoft.com/bookmarklet/images/attribution.png"></a>     </p>     </div>     </form> If you note the code snippet above, I have included the scripts in the top with the attachMode set to “optout” and for the last TextBox, I have mentioned the MicrosoftILITWebAttach="false” attribute to make it accept English input.   Additionally, you also need to add the “Microsoft Indic Language Input Tool attribution image” to your web page as a courtesy to the team that developed this feature.  It would basically add a image saying “Transliteration by Microsoft” similar to a Copy Right image.  You can see the screen shot below where I have typed it in Tamil.  In that you will notice that the password field behaves as expected and the last field accepts English Text.  You can also notice the icon that comes in the first textbox that indicates that, the field is going to accept indic text.   This sample is using Tamil, but you can pretty much do it for Hindi, Telugu, Kannada, Marathi, Bengali etc.,   The website for getting the Indic script and other instructions is http://specials.msn.co.in/ilit/WebEmbed.aspx?language=Tamil You can replace the querystring value “Tamil” to other languages as mentioned above to get the respective script. This also works for plain HTML based websites and doesn’t necessarily need you to use ASP.NET to achieve the functionality. Note that, this form is not completely localized.  This is transliterated.  You can add label controls for FirstName, LastName indication etc., and use the Visual Studio tools to localize and get those values from resource files.  In the resource files, you can enter the text in different languages to make this a truly localized page.  If you just want to download the Indic Tool Desktop version (that can be used for typing in Word, Excel, pretty much any input area), you can download it from http://specials.msn.co.in/ilit/  In the same page, there is also a web version where you can type and get text then and there if you dont want to install the desktop version. So, go ahead, download / use them in your websites and enjoy the power of Indic. Cheers !!!

  Read the article

• Sound issues after trying everything

  - by Lerp

  I cannot get my sound working properly, no matter what I do, there's always some problem. It's very annoying as it's the only thing preventing me from making Ubuntu my main OS. At the moment my sound always plays through both my speakers and my headphones regardless except the sound through the headphones is crackly. It is also a bit quiet even though everything is maxed. I've managed to improve the situation to a point where the sound out of my speakers is perfect but I have none at all from my headphones. I do have two connectors listed in the sound settings but regardless of which one is selected it always plays through the speakers. I think this might have something to do with the fact that my speakers are plugging into the front of my computer, typically the headphone jack, and my headphones are plugging into the back but when I try disconnecting the speakers from the front there is still no sound from the headphones. I fixed the speaker sound by going through the sound settings and making sure they were all set to 100% then rebooting. Things I have tried: Maxing everything and unmuting everything in alsamixer Uninstalling pulseaudio Making gstreamer use only alsa via gstreamer-properties. This worked with the sound test button including independent sound between headphones and speakers but when I reset the computer it no longer worked. So I tried setting it manually in gconf-editor which didn't work either. Reinstalling alsa and pulseaudio Setting the model in /etc/modprobe.d/alsa-base.conf to 6stack and 6stack-dig neither worked. Upgrading to 12.10 Here's some command output to help you diagnose my problem. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 sudo lshw -C sound *-multimedia description: Audio device product: 82801JI (ICH10 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:70 memory:f7ff8000-f7ffbfff cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 options snd-hda-intel model=6stack

  Read the article

• Physics System ignores collision in some rare cases

  - by Gajoo

  I've been developing a simple physics engine for my game. since the game physics is very simple I've decided to increase accuracy a little bit. Instead of formal integration methods like fourier or RK4, I'm directly computing the results after delta time "dt". based on the very first laws of physics : dx = 0.5 * a * dt^2 + v0 * dt dv = a * dt where a is acceleration and v0 is object's previous velocity. Also to handle collisions I've used a method which is somehow different from those I've seen so far. I'm detecting all the collision in the given time frame, stepping the world forward to the nearest collision, resolving it and again check for possible collisions. As I said the world consist of very simple objects, so I'm not loosing any performance due to multiple collision checking. First I'm checking if the ball collides with any walls around it (which is working perfectly) and then I'm checking if it collides with the edges of the walls (yellow points in the picture). the algorithm seems to work without any problem except some rare cases, in which the collision with points are ignored. I've tested everything and all the variables seem to be what they should but after leaving the system work for a minute or two the system the ball passes through one of those points. Here is collision portion of my code, hopefully one of you guys can give me a hint where to look for a potential bug! void PhysicalWorld::checkForPointCollision(Vec2 acceleration, PhysicsComponent& ball, Vec2& collisionNormal, float& collisionTime, Vec2 target) { // this function checks if there will be any collision between a circle and a point // ball contains informations about the circle (it's current velocity, position and radius) // collisionNormal is an output variable // collisionTime is also an output varialbe // target is the point I want to check for collisions Vec2 V = ball.mVelocity; Vec2 A = acceleration; Vec2 P = ball.mPosition - target; float wallWidth = mMap->getWallWidth() / (mMap->getWallWidth() + mMap->getHallWidth()) / 2; float r = ball.mRadius / (mMap->getWallWidth() + mMap->getHallWidth()); // r is ball radius scaled to match actual rendered object. if (A.any()) // todo : I need to first correctly solve the collisions in case there is no acceleration return; if (V.any()) // if object is not moving there will be no collisions! { float D = P.x * V.y - P.y * V.x; float Delta = r*r*V.length2() - D*D; if(Delta < eps) return; Delta = sqrt(Delta); float sgnvy = V.y > 0 ? 1: (V.y < 0?-1:0); Vec2 c1(( D*V.y+sgnvy*V.x*Delta) / V.length2(), (-D*V.x+fabs(V.y)*Delta) / V.length2()); Vec2 c2(( D*V.y-sgnvy*V.x*Delta) / V.length2(), (-D*V.x-fabs(V.y)*Delta) / V.length2()); float t1 = (c1.x - P.x) / V.x; float t2 = (c2.x - P.x) / V.x; if(t1 > eps && t1 <= collisionTime) { collisionTime = t1; collisionNormal = c1; } if(t2 > eps && t2 <= collisionTime) { collisionTime = t2; collisionNormal = c2; } } } // this function should step the world forward by dt. it doesn't check for collision of any two balls (components) // it just checks if there is a collision between the current component and 4 points forming a rectangle around it. void PhysicalWorld::step(float dt) { for (unsigned i=0;i<mObjects.size();i++) { PhysicsComponent &current = *mObjects[i]; Vec2 acceleration = current.mForces * current.mInvMass; float rt=dt; // stores how much more the world should advance while(rt > eps) { float collisionTime = rt; Vec2 collisionNormal = Vec2(0,0); float halfWallWidth = mMap->getWallWidth() / (mMap->getWallWidth() + mMap->getHallWidth()) / 2; // we check if there is any collision with any of those 4 points around the ball // if there is a collision both collisionNormal and collisionTime variables will change // after these functions collisionTime will be exactly the value of nearest collision (if any) // and if there was, collisionNormal will report in which direction the ball should return. checkForPointCollision(acceleration,current,collisionNormal,collisionTime,Vec2(floor(current.mPosition.x) + halfWallWidth,floor(current.mPosition.y) + halfWallWidth)); checkForPointCollision(acceleration,current,collisionNormal,collisionTime,Vec2(floor(current.mPosition.x) + halfWallWidth, ceil(current.mPosition.y) - halfWallWidth)); checkForPointCollision(acceleration,current,collisionNormal,collisionTime,Vec2( ceil(current.mPosition.x) - halfWallWidth,floor(current.mPosition.y) + halfWallWidth)); checkForPointCollision(acceleration,current,collisionNormal,collisionTime,Vec2( ceil(current.mPosition.x) - halfWallWidth, ceil(current.mPosition.y) - halfWallWidth)); // either if there is a collision or if there is not we step the forward since we are sure there will be no collision before collisionTime current.mPosition += collisionTime * (collisionTime * acceleration * 0.5 + current.mVelocity); current.mVelocity += collisionTime * acceleration; // if the ball collided with anything collisionNormal should be at least none zero in one of it's axis if (collisionNormal.any()) { collisionNormal *= Dot(collisionNormal, current.mVelocity) / collisionNormal.length2(); current.mVelocity -= 2 * collisionNormal; // simply reverse velocity along collision normal direction } rt -= collisionTime; } // reset all forces for current object so it'll be ready for later game event current.mForces.zero(); } }

  Read the article

< Previous Page | 368 369 370 371 372 373 374 375 376 377 378 379  | Next Page >