Search Results

Search found 12213 results on 489 pages for 'mapped drive'.

Page 373/489 | < Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >

• Can't run Ubuntu from disc

  - by alex

  When I place the boot CD in my CD drive and boot from it, I get the Ubuntu menu. I have these options Try Ubuntu without any change to your computer Install Ubuntu Check disc for defects Test memory Boot from first hard disk I can use the cursor keys to select them, and I can push F1 for help etc. However, I can not select an option. I've highlighted the first and tried enter, space bar etc. I do have a KVM, so I plugged in a 2nd USB keyboard and tried it but no go either. I can push escape and then got to the prompt. Am I doing something wrong?

  Read the article

• In terms of performance, which processor is more suitable?

  - by Roberts

  My computer specs: Motherboard: Gigabyte GA-945PL-S3 OS: Microsoft Windows 7 Ultimate CPU Socket: LGA775 CPU: Intel® Core™2 Duo Processor E4300 (2M Cache, 1.80 GHz, 800 MHz FSB) After I bought new hard drive (Western Digital 250GB, 7200rpm, 32MB, Sata III, Caviar Blue, WD2500AAKX) I saw that my processor temperature started to raise to higher value then before. Now while surfing internet it goes to 70°C. Cleaned my motherboard - nothing; cleaned fan - nothing; replaced thermal paste - nothing; replaced thermal paste with care - still nothing. So I went to friend just to check if he doesn't have any spear fan, and he did. But with fan he had another processor that he didn't need and he wanted to give it to me, but I told him that I will think about this. So my CPU, he's CPU (Intel® Pentium® D Processor 820 (2M Cache, 2.80 GHz, 800 MHz FSB)). Question: which proccesor is better for gaming and for recording games?

  Read the article

• How to convert Windows filenames (from a checksums.md5) to *nix notation so I can use it on my shell with md5sum?

  - by Somebody still uses you MS-DOS

  I have some checksums.md5 verification files from an ntfs external drive, but using windows notation: \ instead of /, spaces between file names (not escaped), reserved shell characters (like (, &, ', to name a few). The checksums.md5 has a bunch of checksums and filenames: ;Created by program ;2010 f12f75c1f2d1a658dc32ca6ef9ef3ffc *My Windows & Files (2010)\[bak]\testing.wmv 53445e1a0821b790872e60bd7a166887 *My Windows Files' 2 (2012)\[bak]\testing.wmv 53445e1a0821b790872e60bd7a166887 *My Windows Files ˜nicóde (2012)\[bak]\testing.wmv ;Finished I want to use this checksums.md5 to verify the files that I've copied to my machine: but I'm on a Linux, so I need to convert the names inside checksums.md5 from Windows to Linux to use the md5sum utility from the shell. The first line in my example would become: f12f75c1f2d1a658dc32ca6ef9ef3ffc My\ Windows\ \&\ Files\ \(2010\)/\[bak\]/testing.wmv Is there some application for this (converting a file listing, from windows cmd notation, to linux shell notation) or will I need to create a bash script using sed that just "replaces" what is "wrong" with the filenames?

  Read the article

• Login on VMWare XP guest machine keeps locking user AD account

  - by mark

  Environment: Windows 2003 AD Host: Windows 7 Pro VMWare Guest: Windows XP I use a normal user but I also have AD Admin rights (via another user). I use my AD account to login on the host as well on the aforementioned guest system. They don't share their profiles, so no problems here. I had reason to change my user (AD) password. When I did this, the guest was suspended but my user was logged in. A few days after my password change I resumed the guest. I was able to work but couldn't access networked mapped drives. I logged out and tried to log in again. At this point I realized that I initially was logged in with a user from a point before I changed my password. I logged in again with the new password, but then things went bad. I was able to successfully log in to my XP guest, however once that was completed, my AD user account got locked. This now also affected my user on the host. I was able to unlock the account, but there is still this problem: I log in via my new password into the guest and then my AD account gets locked. I'm successfully logged into the guest, but I can't access network shares from the AD server. If I don't unlock my account on the AD server, I will get further problems with my AD user. I tried multiple things, none worked: removed XP guest from AD, deleted all users, even my XP AD user profile on the guest, added machine to the AD, logged in - log in successful, account locked I resumed an older state of my guest (sometimes from the last year even) but the problem still persists. I tried this with disabled networking when the old machine state is resumed and so on, but no luck. It seems to me, although only my account is locked, this is somehow connected to the guest machine itself. I really want to avoid re-installation. This guest image was my old workstation which I virtualized once I moved to W7 pro and thus is still very valueable or me. I can work locally on the guest once logged in, but I can't access any network shares which is a problem. thanks

  Read the article

• Dell 2950 Perc 6/i "physical disk" and "Enclosure(Backplane)" under Connector 1 in OMSA tree- Troubleshoot help

  - by user66357

  Just looking for someone who might know why this could occur... In OMSA, on my Dell 2950, there usually is only one "Physical Disks" child under "Enclosure (Backplane)" in the tree view. Currently, the tree looks like this: Dell PERC 6/i Integrated Connector 1 (RAID) Enclosure (Backplane) Physical Disks (1:04 good, 1:05 removed) Physical Disks (1:33 Ready but unused) Normally it's like this: Connector 1 (RAID) Enclosure (Backplane) Physical Disks (1:04 good, 1:05 good) From the front, 6 of 6 3.5" SAS drives are connected. The server is showing Slot 5 as bad and the disk as removed. It seems that the drive in Slot 5 is being sensed as external to the Enclosure. Any ideas why this would happen? Think I can get away with rebuilding the virtual disk by replacing 1:05 with 1:33? Thanks.

  Read the article

• Microsoft Basic Office 2007 Activation Keys won't work after re-installing on my Laptop

  - by Rolnik

  So, I've upgraded my hard-drive on my laptop, and proceeded to grab my trusty copper-faced Official MS Office disk to do an install. I have three licenses with the fancy green-blue paper that identifies the license keys. Problem is, that for each of these license keys, when the Office 2007 software asks that I enter the "Product Key" it states: The key is incorrect. Verify that you have the correct key, and then retype it Why would Microsoft want to inhibit/prohibit re-installs on the same machine that the software was initially installed to? Incidentally, the same goofy error happens with each of the three valid product key (activation keys) that I enter.

  Read the article

• How to recover data from software RAID 5 disk partition

  - by Ali n

  I have CentOS 5.8 on my computer, with 5x 1TB hard drives. I used software RAID. (RAID 1 as a boot partition md0, RAID 0 as a root partition md1 and RAID 5 as /home partition md3). Unfortunately one of these hard drives failed lately and I want to replace it with a new one. I want to know that is it possible to change this hard drive without data loss? The important partition is RAID 5 so in theory if one of hard drives failed I should be able to recover its data without any problem. But in practice how can I do that?

  Read the article

• CD/DVD cataloging software?

  - by NoCanDo

  I'm looking for freeware, or preferably open source CD/DVD cataloging applications. Right now I'm testing http://www.gentibus.com/us/Download.htm, anyone got any other suggestions? I'd like the software to be actively maintained and not released and left behind. I'm looking for software which allows me to catalog, sort, search my DVDs/CDs into databases. Like I've 1 group of 10 dvds only with Fonts etc. I want to read the content into a Database called "Fonts'". Another group of 5 DVD's with Stockimages, and I want to read all 5 DVDs into the Database "Stock Images". Then I want this software to be able to open Database "Stock Images", I want to be able to browse DVD 1 - 5 and to see DVD 1 - 5's contents without having the DVD's in the optical drive.

  Read the article

• Lost contact with my NAS after changing its IP

  - by Beles

  I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

  Read the article

• Disable disk caches in AWS EBS for PostgreSQL?

  - by Alexandr Kurilin

  It's my understanding that, without correctly disabling OS-level and drive-level caching, there is a chance that in case of system failure the Write-Ahead Log might not be saved correctly and in fact might get corrupted, possibly preventing data recovery. I've already made sure that wal_sync_method=fdatasync however I was unable to make any configuration changes with hdparm since I get the following: $ sudo htparm -I /dev/xvdf /dev/xvdf: HDIO_DRIVE_CMD(identify) failed: Invalid argument Looks like that option is not available in the kind of setup you get in EC2. Am I missing anything here? Are there any other obvious caches I have to disable to ensure the WAL's safety?

  Read the article

• GUID Partition Table & Linux

  - by Zac

  (1) Is it true that the new GUID Partition Table scheme allows a user to partition a drive however he/she like, outside of the traditional MBR "4 primaries or 3 primaries + 1 extension" paradigm? If so, are there any limitations to the GPT? If my assumption is wrong, what are its advantages over the MBR model? (2) I'm getting a new laptop this week and will be installing Ubuntu (and, more generally, Linux) for the first time ever. Does Ubunutu come pre-configured with MBR as a default? If so, how do I get Ubuntu w/ GPT? If not, how do I specify GPT over MBR? Thanks!

  Read the article

• Netgear WNR1000 WiFi speed

  - by Kamil Klimek

  I have Netgear WNR1000 150N, Macbook Pro 13" with Broadcom BCM43xx 1.0, Network connection 60mbps When I connect through the cable I easily get around 60mbps. When I go through the WiFi it's capable to get only 32mbps at tops. Any ideas why is that? Is that my router limitation or maybe my WiFi card? If it is routers fault what router would you suggest. Best router would be with usb port for external hard drive. Forgot to add screenshot with connection details: Szybkosc transmisji == Transmission speed

  Read the article

• A network share folder is invisible to users

  - by Myrddin Emrys

  I have a network share folder that I was recently cleaning up permissions to. I took off the four individual names from the access permissions to the folder, and added a new security group (Universal) with standard Read/Write permissions to that folder, then added those 4 people to the group. However... now nobody can see the folder. The users can see the other 9 folders in that shared drive, but the 10th is missing. I cannot see any security permission in the parent folder or in the folder itself which would cause it to be invisible to anyone, regardless of whether they have permission to open it or edit files within.

  Read the article

• Trying to get a PC to boot off a bootable SD card that is inside an USB attached Android device.

  - by Cyril

  First, I'd like to make myself look less a madman than I may have appeared to be. I wanted to have a bootable USB stick with me at all times, but it's less convenient because it's an extra object and it's easier to lose, forget etc. Then I thought, I have an Android phone, and it has a micro SD in it; perfect. Not all PC's can boot off a card reader, but the phone itself is a card reader when attached as a disk drive. Or at least so I thought. Turns out that my netbook BIOS (tested on Asus eeePC) refuses to see it as an external harddrive; it only recognizes it as a generic USB device and doesn't offer an option to boot from it. The device has a name "Android phone" or smth, so it seems to me that it doesn't work as a "pure" card reader, and instead still manifests itself as a phone. Can it be somehow overridden?

  Read the article

• update ocz vertex le capacity via firmware update

  - by Ben Voigt

  I have an OCZ Vertex LE 100GB drive. It's actually 128GiB of NAND flash, with a whopping 28%+ reserved for write combining. Most 128GiB drives are actually ~ 115GB usable (and marketed as 120GB or 128GB). There were rumors that the reserved fraction could be decreased on OCZ 100GB drives. Can anyone provide a link to firmware that does that, or an official statement that no such firmware exists? (NB: I recently installed the 1.24 firmware from the OCZ site, it didn't affect the capacity. Possibly because the rumors say the capacity change is destructive to existing content.) Of possible interest: flashing firmware was more of a pain than it should have been -- the tool didn't detect the disk until I booted an older Windows install off a secondary hard disk, I suspect the Intel SATA driver is the issue and tool only works with the msachi.sys driver.

  Read the article

• Windows 2003 Storage Server Hanging on Large File Transfers

  - by user25272

  In one of our offices we have a Dell PowerVault 745N NAS device which acts as the main file server. Its running 32bit Windows 2003 Storage Server SP2 with 3GB RAM. The server holds around 60 users HOME folders, which are mapped via AD. The office clients are a mix of XP SP3, Vista and Windows 7. Occasionally the server will completely hang when transferring large files. When the hang happens the console becomes unresponsive with only the mouse active and blank wallpaper. Sometimes stopping the copy frees the server, sometimes not. The hanging can last around 20 minutes. During this time other servers also become unresponsive with blank wallpaper at the console. If you do manage to get onto another server the taskbar and run commands are unresponsive. This also transcends to the client computers sometimes with explorer crashing. I'm guessing this is due to the HOME folder mapping. Eventually the NAS server with free up and everything will be back to normal. The server is configured as follows: PERC 4/DC DATA 2 - 12 SCSI HDD - RAID5 SHADOWCOPY 2 SCSI HDD - RAID1 CERC SATA DATA 11 4 SATA HDD - RAID5 OS 4 SATA HDD - RAID5 All the drivers and firmware is up to date. I've been through all the diagnostics with Dell and the hardware has come up clean including full HDD tests on the arrays. The server has NOD32 installed as the AV, but the hanging happens when it is uninstalled. There are no errors in the event log when this happens and we don't have any errors logged on any of our ProCurve switches. DNS is fine on the domain and AD from what I can tell is running happily. There are no DFS or NFS shares setup either. All the shares are standard Windows. I've unchecked the allow the computer to turn off this device to save power box under Power Management on the NIC. "Set Link Speed and Duplex to Auto-negotiate 1000 " Increased Receive Descriptors buffer from 256 to 352 (reserves more CPU resource for handling data) I've run network traces using network monitor and have found the following: 417 8.078125 {SMB:192, NbtSS:25, TCP:24, IPv4:23} 192.168.2.244 192.168.5.35 SMB SMB:R; Nt Create Andx - NT Status: System - Error, Code = (52) STATUS_OBJECT_NAME_NOT_FOUND I've tried different cabling; NICs and switch ports all with the same result. Transferring files from other servers on the domain is fine. All I haven't done is run CHKDSK on the drives to look for any file system errors. On the Vista clients I have also run netsh interface tcp set global autotuning=disabled with no result. Could it be that the server has a faulty drive or that the I/O is too much for it to handle? Any ideas why would the hang cause issues with the other servers on the LAN? Many Thanks.

  Read the article

• Gparted: Copy Greyed Out

  - by David

  I booted my system to a gparted linux live CD and I have two partitions: /dev/sda1 /dev/sda2 I want to move both of them to my new physical hard drive (called /dev/sdb). When I right click on /dev/sda1, I can choose copy and then paste it onto /dev/sdb. When I right click on /dev/sda2, copy is greyed out and there is a yellow exclamation point to the left of the disk. I know that the disk works since I can boot my computer from it. Why won't gparted let me copy /dev/sda2 to my new hard disk? Since the option is greyed out, I don't even get an error message. Thanks!

  Read the article

• MacBook Pro screen goes dark

  - by Mike M

  I've had my MacBook Pro for two years now; no problems so far (it has had 3rd party RAM from the get go). Today, I'm copying a particularly large VM from an External disk drive to local MacBook disk. It has about 3GB to go and I take off to do some other things and when I come back my screen is "dark". The computer is still on but I can't see anything. I forced a reboot by holding down the power button, it starts up with the "chimes", but still no screen. I've done this several times. Any ideas? Do you think the hard disk activity caused it to get too hot?

  Read the article

• Deploy Windows 7 Backup set to Windows 8

  - by Matthias

  Situation: We have a laptop here that's completely fubar. I.e: The hard drive is filled to the brim with bad sectors. Luckily, backups have been made using the built-in Windows 7 backup feature. This produces folders named Backup Set 2012-11-09 003009, containing folders like Backup Files 2012-11-09 003009, containing zip-files like Backup files 1, 2, 3,... Our brand new laptop comes with Windows 8. Now: Can we, using the standard back-up and restore feature in Windows 8, restore all the documents, music, etc. using the Windows 7 backup files? Thanks. (FYI: We also took a normal backup of all the documents just to be sure of course. I'm just curious what would happen. I would test it out, but the new laptop hasn't arrived yet and I wanted to make sure my efforts would not be in vain.)

  Read the article

• How do I force specific permissions for new files/folders on Linux file server?

  - by humble_coder

  I'm having an issue with my install of Ubuntu 9.10 (file server) and its samba permissions. Logging in and reading works fine. However, creation of new directories by users restricts access for other users. For instance, if Bob (Windows user who maps the drive) creates a folder in the directory, Jane (Mac user that simply smb mounts) can read from it, but can't write to it -- and vice versa. I then must go CHMOD 777 the directory for everyone to be happy. I've tried editing the "create/directory mask", and "force" options in the smb.conf file but this doesn't seem to help. I'm about to resort to CRONTABing a recursive chmod routine, although I'm sure this isn't the fix. How do I get all new items to always be 777? Does anyone have any suggestions to fix this ever-occurring situation? Best

  Read the article

• How to get physical partition name from iSCSI details on Windows?

  - by Barry Kelly

  I've got a piece of software that needs the name of a partition in \Device\Harddisk2\Partition1 style, as shown e.g. in WinObj. I want to get this partition name from details of the iSCSI connection that underlies the partition. The trouble is that disk order is not fixed - depending on what devices are connected and initialized in what order, it can move around. So suppose I have the portal name (DNS of the iSCSI target), target IQN, etc. I'd like to somehow discover which volumes in the system relate to it, in an automated fashion. I can write some PowerShell WMI queries that get somewhat close to the desired info: PS> get-wmiobject -class Win32_DiskPartition NumberOfBlocks : 204800 BootPartition : True Name : Disk #0, Partition #0 PrimaryPartition : True Size : 104857600 Index : 0 ... From the Name here, I think I can fabricate the corresponding name by adding 1 to the partition number: \Device\Harddisk0\Partition1 - Partition0 appears to be a fake partition mapping to the whole disk. But the above doesn't have enough information to map to the underlying physical device, unless I take a guess based on exact size matching. I can get some info on SCSI devices, but it's not helpful in joining things up (iSCSI target is Nexenta/Solaris COMSTAR): PS> get-wmiobject -class Win32_SCSIControllerDevice __GENUS : 2 __CLASS : Win32_SCSIControllerDevice ... Antecedent : \\COBRA\root\cimv2:Win32_SCSIController.DeviceID="ROOT\\ISCSIPRT\\0000" Dependent : \\COBRA\root\cimv2:Win32_PnPEntity.DeviceID="SCSI\\DISK&VEN_NEXENTA&PROD_COMSTAR... Similarly, I can run queries like these: PS> get-wmiobject -namespace ROOT\WMI -class MSiSCSIInitiator_TargetClass PS> get-wmiobject -namespace ROOT\WMI -class MSiSCSIInitiator_PersistentDevices These guys return information relating to my iSCSI target name and the GUID volume name respectively (a volume name like \\?\Volume{guid-goes-here}), but the GUID volume name is no good to me, and there doesn't appear to be a reliable correspondence between the target name and the volume that I can join on. I simply can't find an easy way of getting from an IQN (e.g. iqn.1992-01.com.example:storage:diskarrays-sn-a8675309) to physical partitions mapped from that target. The way I do it by hand? I start Disk Management, and look for a partition of the correct size, verify that its driver says NEXENTA COMSTAR, and look at the disk number. But even this is unreliable if I have multiple iSCSI volumes of the exact same size. Any suggestions?

  Read the article

• Missing HDD space - says 65GB used, selecting all folders shows 40GB used

  - by Igor K

  Hi Running Windows Server 2008, 74GB raptor drive and noticed we only had about 500MB left - yikes! So deleted some old backups we don't need, but can't track down where about 25GB seems to be taken up. If I go to C: and select all folders and go to properties, this comes to around 40GB but in My Computer I can see 65GB is used. How can I find out whats eating the space? Just IIS + MSSQL Express + Smartermail on the server EDIT Checked to show hidden folders plus protected operating system files - 41.8GB usage, so 24.6GB is missing somewhere. Theres no system restore even installed on the server

  Read the article

• Easy File Locker Locked My Desktop

  - by user20358

  I'm happy with easy file locker, it does as promised. Last night I decided to lock all my files. C:users/Barry Some how my desktop is locked. When I closed EFL my desktop went black. Safe mode is still black. Help Below are my spec's eMachines ET1161-03 CPU: Athlon 64 X2 4400+; CPU speed: 2300GHz; Graphics adapter: nVidia GeForce 6150SE; Monitor: No; Hard drive size: 320GB; WorldBench rating: Fair

  Read the article

• My KDE very slow in certain operations

  - by Pietro

  I have a problem with my Linux installation. It seems that the KDE code that deals with directory windows is extremely slow (on both Dolphin and Konqueror). This happens both when I click on a directory icon and when I want to open/save a file from many KDE applications. The time the window takes to open can be one minute or more. The same happens when I right click on an icon. Looking at the CPU usage, this is very low (less than 10%). Am I the only one with this problem, or is it well known and maybe already fixed? Consider that I cannot update to a more recent version of OpenSuse. Thank you, Pietro Configuration: Linux version: OpenSuse 11.4 KDE 4.6.0 System: DELL Precision T3500 - Intel Xeon Home directory mounted on a remote drive. <-- could this be the reason?

  Read the article

• tradeoffs of iSCSI vs. AFP when using Time Machine with a NAS?

  - by ajit.george

  I'm setting up a home NAS device (Synology DS409) that I'm planning to use for Time Machine backups (amongst other things). What are the tradeoffs between using iSCSI or AFP to mount the backup volume? The Synology wiki suggests that iSCSI is better if the Mac will be frequently disconnected from the network or sleeping, from the point of view of the volume automatically remounting. What about filesystem consistency? Given that unplugging a USB drive without properly unmounting it often requires the Time Machine volume to be repaired, would iSCSI have the same issues? Thanks in advance.

  Read the article

< Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >