Search Results

Search found 10101 results on 405 pages for 'temporary tables'.

Page 373/405 | < Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >

• Win 8: Adding a boot volume to an MBR dynamic disk [NOT about changing to basic disks]

  - by Stilez

  (This is NOT aiming to convert to basic disk. In this question, the disk stays dynamic but becomes bootable) There doesn't seem to be a clear, well stated answer I can find, for the question "What are the criteria for Windows 8 to successfully boot from an MBR dynamic disk", or "how do I fix a dynamic MBR partition that's failing boot"? I've tried to educate myself but can't find crucial information to clear it all up. My existing HDD/SSD setup: DISK 0 ~ 60GB SSD/MBR/basic: (350MB recovery)(60GB windows 8 bootable) DISK 1 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB unallocated)(410GB mirrored data) DISK 2 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB unallocated)(410GB mirrored data) DISKS 3, 4, 5: (ignored for simplicity: 2xHDD RAID1 + caching SSD) I'm heavy duty on data crunching and virtualisation, just maxxed out 32GB RAM @ 2133 and moved to 4960X + 64GB. Disk 0 is a pure system disk of little value, and virtualisations runs off mirrored SSDs (Samsung 840 Pro 512 x 2) for double speed reading and so they snapshot in reasonable time. I'm using 4 SATA3 ports and the board only has two decent Intel ports (onboard Marvell are poorer quality). I'm wary of choosing between LSI, HighPoint and other 3rd party controllers as I'm unfamiliar with the maze of decent RAID cards (that's a whole other issue!). I want to cut down my SSD needs by moving the boot volume and caching volume to the 840 pros, giving a setup with 2 fewer SSDs: DISK 0 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB boot)(410GB mirrored data) DISK 1 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(30GB cache for the ICH10R mirror)(30GB temp)(410GB mirrored data) DISKS 2, 3: (2xHDD RAID1) Intel's RST allows this, Win 8 allows booting off a MBR/dynamic disk, and the two 60GB SSDs are hardly the fastest SSDs anyway, they'll get repurposed. Moving the caching volume is easy. Moving the boot volume has me stumped. The difficulty is, I'm hitting a wall of knowledge here. I have a UEFI Asus motherboard with an previous traditional MBR/basic boot disk, and I want it to boot from a disk and volume that's MBR/dynamic. The disk copy is physically ok (Partition Wizard Server will copy to dynamic volumes) but then hits a light blue 0xc000000e boot error. No real surprise, I expected to have some boot fixing, but had expected Windows to boot-fix it (all drivers exist), or the usual manual fixes to work. Specifically, I don't know enough, to know what's got to be manually checked and perhaps corrected for the disk to boot (legacy/uefi/bios, odd partitions, boot tables, disk IDs, hidden boot files, oh my!), or if I need to change any of this secure boot/UEFI/legacy stuff in the bios, convert a 512 SSD to basic and then back to dynamic when working, or if the issue is pure OS config using "diskpart", "bootsect" and "bootrec" from the Win8 DVD. The old system disk still boots but I don't know enough to figure what to fix, to make the system boot as I want. The answers probably aren't hard but the real issue is my confusion and missing information. Thanks for helping!

  Read the article

• Is Steam for Mac effectively running as superuser?

  - by godDLL

  When you download the client it does not weigh too much, and seems to do very little. Inside the app bundle there is a script that—upon inspecting the environment and deciding you're not running Linux—launches the client, which downloads the full support environment and resources. For this to happen (all of this is saved inside the bundle, the app bundle gets updated in this process) Steam wants Universal Access for Assistive Devices, and your password. Cacheable resources, preferences (like keyboard shortcuts), support files (like game hardware requirement lookup tables) live inside the bundle, not in ~/Library/{Application Support|Preferences|Cache}; games' data get dumped into ~/Documents/Steam Content. I'd describe myself as a bit OCD (which really says a lot), and I wouldn't care that much still. I'd go comb this hairy mess and find out where stuff is, when and if I need to, even if it's in an unfamiliar place; that does not actually tick me off. Well, a little bit. What makes me concerned is the way Steam needs both Access for Assistive Devices, and my password to run. The former gives it the ability to talk very intimately with running apps and the underlying system; while the latter (admin account) could very well give it and it's publishers unrestricted access to all my software, hardware and data. With publishers like Rockstar using scene NOCD cracks to publish their games on Steam, I'm not so sure I'm OK with this. I'd like more games made available for the MacOS X and all the pretty machines that run it, but this arrangement does not seem very Mac-like to me. It looks like Valve is going around system security measures and best practices, foregoing sandboxing, code signing, relatively sane structured organization; all the things that would appeal to someone who's no fun at parties at all, and will die alone, in his long dead mother's basement… wait. Right. Anyway. Can we get some input on Steam for Mac security at the end-user machine, from someone who understands how Accessibility API works, whether games distributed on Steam can read and write outside the user homefolder, collect data from other running apps, or similar?

  Read the article

• Portable scripting language for a multi-server admin?

  - by Aaron

  Please Note: Portable as in portableapps.com, not the traditional definition. Originally posted on stackoverflow.com, asking here at another user's suggestion. I'm a DBA and sysadmin, mostly for Windows machines running SQL Server. I'm looking for a programming/scripting language for Windows that doesn't require Admin access or an installer, needing no install process other than expanding it into a folder. My intent is to have a language for automation on which I can standardize. Up to this point, I've been using a combination of batch files and Unix shell, using sh.exe from UnxUtils but it's far from a perfect solution. I've evaluated a handful of options, all of them have at least one serious shortcoming or another. I have a strong preference for something open source or dual license, but I'm more interested in finding the right tool than anything else. Not interested that anything that relies on Cygwin or Java, but at this point I'd be fine with something that needs .NET. Requirements: Manageable footprint (1-100 files, under 30 MB installed) Run on Windows XP and Server (2003+) No installer (exe, msi) Works with external pipes, processes, and files Support for MS SQL Server or ODBC connections Bonus Points: Open Source FFI for calling functions in native DLLs GUI support (native or gtk, wx, fltk, etc) Linux, AIX, and/or OS X support Dynamic, object oriented and/or functional, interpreted or bytecode compiled; interactive development Able to package or compile scripts into executables So far I've tried: Ruby: 148 MB on disk, 23000 files Portable Python: 54 MB on disk, 2800 files Strawberry Perl: 123 MB on disk, 3600 files REBOL: Great, except closed source and no MSSQL or ODBC in free version Squeak Smalltalk: Great, except poor support for scripting ---- cut: points of clarification ---- Why all the limitations? I realize some of my criteria seem arbitrarily confining. It's primarily a product my environment. I work as a SQL Server DBA and backup Unix admin at a division of a large company. In addition to near a hundred boxes running some version or another of SQL Server on Windows, I also support the SQL Server Express Edition installs on over a thousand machines in the field. Because of our security policies, I don't login rights on every machine. Often enough, an issue comes up and I'm given local Admin for some period of time. Often enough, it's some box I've never touched and don't have my own environment setup yet. I may have temporary admin rights on the box, but I'm not the admin for the machine- I'm just the DBA. I've no interest in stepping on the toes of the Windows admins, nor do I want to take over any of their duties. If I bring up "installing" something, suddenly it becomes a matter of interest for Production Control and the Windows admins; if I'm copying up a script, no one minds. The distinction may not mean much to the readers, but if someone gets the wrong idea I've suddenly got a long wait and significant overhead before I can get the tool installed and get the problem solved. That's why I want something that can be copied and run in the manner of a portable app. What about the small footprint? My company has three divisions, each in a different geographical location, and one of them is a new acquisition. We have different production control/security policies in each division. I support our MSSQL databases in all three divisions. The field machines are spread around the US, sometimes connecting to the VPN over very slow links. Installing Ruby \using psexec has taken a long time over these connections. In these instances, the bigger time waster seems to be archives with thousands and thousands of files rather than their sheer size. You could say I'm spoiled by Unix, where the admins usually have at least some modern scripting language installed; I'd use PowerShell, but I don't know it well and more importantly it isn't everywhere I need to work. It's a regular occurrence that I need to write, deploy and execute some script on short notice on some machine I've never on which logged in. Since having Ruby or something similar installed on every machine I'll ever need to touch is effectively impossible because of the approvals, time and and Windows admin labor needed I makes more sense find a solution that allows me to work on my own terms.

  Read the article

• Why MySQL sat for 2 minutes doing nothing?

  - by Alex R

  This was a one-time thing, not reproducible... But I saved the show innodb status output. Can anybody tell what's going on here? The simple insert took almost 3 minutes to complete. | InnoDB | | ===================================== 110201 15:58:10 INNODB MONITOR OUTPUT ===================================== Per second averages calculated from the last 34 seconds ---------- SEMAPHORES ---------- OS WAIT ARRAY INFO: reservation count 11963, signal count 11766 --Thread 1824 has waited at .\btr\btr0cur.c line 443 for 118.00 seconds the sema phore: S-lock on RW-latch at 09D6453C created in file .\buf\buf0buf.c line 550 a writer (thread id 1824) has reserved it in mode wait exclusive number of readers 1, waiters flag 1 Last time read locked in file .\buf\buf0flu.c line 599 Last time write locked in file .\btr\btr0cur.c line 443 Mutex spin waits 0, rounds 527817, OS waits 7133 RW-shared spins 2532, OS waits 1226; RW-excl spins 1652, OS waits 1118 ------------ TRANSACTIONS ------------ Trx id counter 0 95830 Purge done for trx's n:o < 0 95814 undo n:o < 0 0 History list length 11 LIST OF TRANSACTIONS FOR EACH SESSION: ---TRANSACTION 0 0, not started, OS thread id 3704 MySQL thread id 551, query id 2702112 localhost 127.0.0.1 root show innodb status ---TRANSACTION 0 95829, not started, OS thread id 3132 MySQL thread id 534, query id 2702020 localhost 127.0.0.1 root ---TRANSACTION 0 95828, not started, OS thread id 3152 MySQL thread id 527, query id 2701973 localhost 127.0.0.1 root ---TRANSACTION 0 95827, ACTIVE 118 sec, OS thread id 1824 inserting, thread decl ared inside InnoDB 500 mysql tables in use 1, locked 1 1 lock struct(s), heap size 320, 0 row lock(s) MySQL thread id 526, query id 2701972 localhost 127.0.0.1 root update INSERT INTO log_searchcriteria (userid,search_criteria,date,search_type) VALUES ( NAME_CONST('userid',NULL), NAME_CONST('search_criteria',_latin1' SELECT SQL_C ALC_FOUND_ROWS idx_search.CTCX_LATITUDE, idx_search.CTCX_LONGITUDE, idx_search.b uilding_id, idx_search.LN_LIST_NUMBER, idx_search.LP_LIST_PRICE, idx_search.HSN_ ADRESS_HOUSE_NUMBER, idx_search.STR_ADDRESS_STREET, idx_search.CP_ADDRESS_COMPAS S_POINT, idx_search.UN_UNIT, idx_search.CIT_CITY, idx_search.ZP_ZIP_CODE, idx_se arch.AR_AREA_NAME, idx_search.BR_BEDROOMS, idx_search.BTH_BATHS, idx_search.ST_S TATUS, idx_search.CTCX_STYLE_TYPE, idx_s -------- FILE I/O -------- I/O thread 0 state: wait Windows aio (insert buffer thread) I/O thread 1 state: wait Windows aio (log thread) I/O thread 2 state: wait Windows aio (read thread) I/O thread 3 state: wait Windows aio (write thread) Pending normal aio reads: 0, aio writes: 1, ibuf aio reads: 0, log i/o's: 0, sync i/o's: 0 Pending flushes (fsync) log: 0; buffer pool: 0 151006 OS file reads, 120758 OS file writes, 6844 OS fsyncs 0.00 reads/s, 0 avg bytes/read, 0.00 writes/s, 0.00 fsyncs/s ------------------------------------- INSERT BUFFER AND ADAPTIVE HASH INDEX ------------------------------------- Ibuf: size 1, free list len 5, seg size 7, 24664 inserts, 24664 merged recs, 4612 merges Hash table size 553253, node heap has 629 buffer(s) 0.00 hash searches/s, 0.00 non-hash searches/s --- LOG --- Log sequence number 5 2318193115 Log flushed up to 5 2318193115 Last checkpoint at 5 2318129891 0 pending log writes, 0 pending chkp writes 3036 log i/o's done, 0.00 log i/o's/second ---------------------- BUFFER POOL AND MEMORY ---------------------- Total memory allocated 213459462; in additional pool allocated 1720192 Dictionary memory allocated 240416 Buffer pool size 8192 Free buffers 0 Database pages 7563 Modified db pages 18 Pending reads 0 Pending writes: LRU 0, flush list 18, single page 0 Pages read 150973, created 28788, written 115137 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout -------------- ROW OPERATIONS -------------- 1 queries inside InnoDB, 0 queries in queue 1 read views open inside InnoDB Main thread id 2992, state: flushing buffer pool pages Number of rows inserted 794294, updated 89203, deleted 13698, read 1453084305 0.00 inserts/s, 0.00 updates/s, 0.00 deletes/s, 0.00 reads/s ---------------------------- END OF INNODB MONITOR OUTPUT ============================ Thanks

  Read the article

• Internet Working, Browsing Not.

  - by jeffreypriebe

  I have a very odd problem that I can't resolve. I am connected to the internet, but my browsing doesn't work. I don't mean a web browser - I mean browsing. Firefox, Chrome, Curl all fail to successfully connect to an HTTP address. However existing connections, e.g. to mail in Outlook (Exchange Server and also IMAP server) continue to work. Also, the internet is on, I can confirm both from my machine (other ports / connections) as well as from any other computer connected to the same network. Additionally, it appears to be HTTP, not simple a port issue as HTTP over port 8443 (Tortoise SVN if you must know - running over HTTP not over SVN) also fails. I am using Windows Vista SP2 (build 6002). It seems to "creep up" in that after running the computer for a few hours it will fail. (No found way to systematically reproduce the problem.) Additionally, it seems to be more prone on days where the internet connection is flaky already (not sure why the internet is flaky, just is, lot's of failed browsing requests and have to retry/reload often). What I have tried (when the problem arises) - none have yielded any resolution: Resetting the network connection (dis-connect, re-connect) Disable/re-enable the network adapter Double-checked the ip settings Double-checked the HOSTS file. Note: DNS continues to work (both new and cached responses to DNS queries). (Thanks for the suggestion Daniel and antenore.) Checked the routing tables (ip4 only as ipv6 is beyond my understanding) resetting all involved hardware (routers and modems) Close and reopen browsers Looked for malware interference: Run HijackThis Looked for suspicious processes using SysInternals procexp. Looked for explorer hijacks, lsa provider interference, winsock provider interference using SysInternals Autoruns. Run a complete anti-virus scan. Reviewed the output of a netstat -onab to see if there were stuck ports open or unusual processes running somewhere The only thing that works is to do a full reboot. That works 100% of the time to restore browsing. What else can I try to nail down the problem?

  Read the article

• mounting ext4 fs with block size of 65536

  - by seaquest

  I am doing some benchmarking on EXT4 performance on Compact Flash media. I have created an ext4 fs with block size of 65536. however I can not mount it on ubuntu-10.10-netbook-i386. (it is already mounting ext4 fs with 4096 bytes of block sizes) According to my readings on ext4 it should allow such big block sized fs. I want to hear your comments. root@ubuntu:~# mkfs.ext4 -b 65536 /dev/sda3 Warning: blocksize 65536 not usable on most systems. mke2fs 1.41.12 (17-May-2010) mkfs.ext4: 65536-byte blocks too big for system (max 4096) Proceed anyway? (y,n) y Warning: 65536-byte blocks too big for system (max 4096), forced to continue Filesystem label= OS type: Linux Block size=65536 (log=6) Fragment size=65536 (log=6) Stride=0 blocks, Stripe width=0 blocks 19968 inodes, 19830 blocks 991 blocks (5.00%) reserved for the super user First data block=0 1 block group 65528 blocks per group, 65528 fragments per group 19968 inodes per group Writing inode tables: done Creating journal (1024 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 37 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. root@ubuntu:~# tune2fs -l /dev/sda3 tune2fs 1.41.12 (17-May-2010) Filesystem volume name: <none> Last mounted on: <not available> Filesystem UUID: 4cf3f507-e7b4-463c-be11-5b408097099b Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 19968 Block count: 19830 Reserved block count: 991 Free blocks: 18720 Free inodes: 19957 First block: 0 Block size: 65536 Fragment size: 65536 Blocks per group: 65528 Fragments per group: 65528 Inodes per group: 19968 Inode blocks per group: 78 Flex block group size: 16 Filesystem created: Sat Feb 5 14:39:55 2011 Last mount time: n/a Last write time: Sat Feb 5 14:40:02 2011 Mount count: 0 Maximum mount count: 37 Last checked: Sat Feb 5 14:39:55 2011 Check interval: 15552000 (6 months) Next check after: Thu Aug 4 14:39:55 2011 Lifetime writes: 70 MB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: afb5b570-9d47-4786-bad2-4aacb3b73516 Journal backup: inode blocks root@ubuntu:~# mount -t ext4 /dev/sda3 /mnt/ mount: wrong fs type, bad option, bad superblock on /dev/sda3, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so

  Read the article

• iptables management tools for large scale environment

  - by womble

  The environment I'm operating in is a large-scale web hosting operation (several hundred servers under management, almost-all-public addressing, etc -- so anything that talks about managing ADSL links is unlikely to work well), and we're looking for something that will be comfortable managing both the core ruleset (around 12,000 entries in iptables at current count) plus the host-based rulesets we manage for customers. Our core router ruleset changes a few times a day, and the host-based rulesets would change maybe 50 times a month (across all the servers, so maybe one change per five servers per month). We're currently using filtergen (which is balls in general, and super-balls at our scale of operation), and I've used shorewall in the past at other jobs (which would be preferable to filtergen, but I figure there's got to be something out there that's better than that). The "musts" we've come up with for any replacement system are: Must generate a ruleset fairly quickly (a filtergen run on our ruleset takes 15-20 minutes; this is just insane) -- this is related to the next point: Must generate an iptables-restore style file and load that in one hit, not call iptables for every rule insert Must not take down the firewall for an extended period while the ruleset reloads (again, this is a consequence of the above point) Must support IPv6 (we aren't deploying anything new that isn't IPv6 compatible) Must be DFSG-free Must use plain-text configuration files (as we run everything through revision control, and using standard Unix text-manipulation tools are our SOP) Must support both RedHat and Debian (packaged preferred, but at the very least mustn't be overtly hostile to either distro's standards) Must support the ability to run arbitrary iptables commands to support features that aren't part of the system's "native language" Anything that doesn't meet all these criteria will not be considered. The following are our "nice to haves": Should support config file "fragments" (that is, you can drop a pile of files in a directory and say to the firewall "include everything in this directory in the ruleset"; we use configuration management extensively and would like to use this feature to provide service-specific rules automatically) Should support raw tables Should allow you to specify particular ICMP in both incoming packets and REJECT rules Should gracefully support hostnames that resolve to more than one IP address (we've been caught by this one a few times with filtergen; it's a rather royal pain in the butt) The more optional/weird iptables features that the tool supports (either natively or via existing or easily-writable plugins) the better. We use strange features of iptables now and then, and the more of those that "just work", the better for everyone.

  Read the article

• Deployment Workbench no longer available after PXE boot

  - by Patrick

  Our build process revolves around windows Deployment Workbench. Unfortunately this was setup by someone who is no longer with the company, and no-one has ever dared/needed to make any changes. The other day it stopped working. It turns out that one of our build guys started thinking about changing some stuff in it, clicked something and now it no longer works (He is saying now that he right clicked on the 'LAB' entry in 'Deployment points' and hit 'Update', which took some time to run through apparently). The job has fallen on me to resolve and frankly I'm not sure what I'm doing. I was wondering if someone with more experience than me can provide some pointers as to troubleshooting cos I'm feeling quite a lot in the dark here. On the server I have Deployment Workbench up and running (MMC snapin) version 3.0. There is a WDS service that appears to be running ok, as does the tFTPd service. Nothing specific to this in event logs. From the client side; PXE boot works and gets you to the Win PE launch, and it has the correct company logo as the background (proving to me that its loading win PE from the network). WPEINIT runs, and asks for domain credentials, here the team simply put User/Pass/Domain in the boxes and click ok. Normally the build would kick off. Instead they get an error message saying that the \NATBLU01\Distribution$ share isn't available. Checking \NATBLU01\Distribution$ shows that its there and accessible over the network. Security/permissions seem ok, even 'ANONYMOUS LOGON' has read access to that share so I don't see that being a problem. Digging the trace files from C:\MININT\SMSOSD\OSDLOGS\ after an attempt to run the build I can see an error saying much the same - <![LOG[Validating connection to \\NATBLU01\Distribution$]LOG]!><time="16:42:14.000+000" date="03-15-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[FindFile: The file OSDConnectToUNC.exe could not be found in any standard locations.]LOG]!><time="16:42:14.000+000" date="03-15-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[The network location cannot be reached. For information about network troubleshooting, see Windows Help.]LOG]!><time="16:42:24.000+000" date="03-15-2012" component="LiteTouch" context="" type="3" thread="" file="LiteTouch"> <![LOG[ERROR - Unable to map a network drive to \\NATBLU01\Distribution$.]LOG]!><time="16:42:24.000+000" date="03-15-2012" component="LiteTouch" context="" type="3" thread="" file="LiteTouch"> BDD.LOG shows much the same. Full copies of the .LOG files can both files be found here : BDD.LOG LITETOUCH.LOG I can get to a command prompt from the Win PE that boots from PXE, however there isn't any network stuff there. IPCONFIG returns nothing so none of the tests I would usually run resolve anything. I'm at a loss frankly. I did wonder if I could perhaps start a new build process but if the change to the DeploymentWorkbench has knocked it offline I don't think I'm going to be able to create a new deployment. Failing that; we do have a deployment point labeled type 'Media' which appears to be a DVD ISO image of one of the builds, but its dated 2008, is it possible to export the network build to .ISO and build from DVD? We are looking at new hardware to run this from anyway (for the impending Windows 7 roll out) so a temporary work round isn't going to be too much of a problem. All assistance is appreciated! EDIT : OK. Got it working again. Solution was close to Newmanth's idea. The problem was that our PE image didn't appear to be connecting the network. I had an older copy of the PE boot.WIM on a stick that I had been using for other purposes. I booted that and correctly got a network connection. Showed a correct internal IP and could ping out etc etc. However I was still getting the same errors in all the logs and in when wpeinit was running. What I did seperately was to update the PE image that DeploymentWorkbench was pushing out to display a different back ground. I wanted to prove that I was working in the correct place. Turns out that I wasn't. I went and looked at the other deployment stuff we had on this machine, Windows Deployment Services was installed and although all the install images are off line the boot image was online, so I uploaded the copy from my stick to that. Booted straight off. And fixed. Working. Yay! For anyone stumbling across this in the future you may find that although your deployment images are located in the DeploymentWorkbench, the Win PE boot image you are launching from is located in the associated Windows Deployment Services images.

  Read the article

• Unecrypted Image of Truecrypt-Encrypted System Partition

  - by Dexter

  The general tenor around the internet seems to be that you can't create images of system partitions that have been encrypted (with truecrypt) other than with dd or similar sector-by-sector copy tools. These files however are very impractical given their size (and are obviously incompressible) which makes keeping multiple states/backups of your system partition rather expensive (..especially considering current hdd prices). The problem is that backup tools (like Acronis True Image, Clonezilla, etc.) won't give you the option to create an image of (mounted/opened) Truecrypt partitions, or that there is no recovery environment for restoring the backup, that would allow to run truecrypt before doing any actual restoring. After some trial and error however, I believe I have found a very simple way. Since Truecrypt (running in Linux) creates a virtual block device, that it uses for mounting the unencrypted partitions into the file system, partclone can be used for creating/restoring images. What I did: boot up a linux live disk mount/open the drive/device/partition in truecrypt unmount the filesystem mount point again, like so: umount /media/truecryptX ("X" being the partition number assigend by truecrypt) use partclone (this is what clonezilla would do too, except that clonezilla only offers you to back up real drive partitions, not virtual block devices): partclone.ntfs -c -s /dev/mapper/truecryptX -o nameOfBackupFile for restoring steps 1-3 remain the same, and step 4 is partclone.ntfs -r -s nameOfBackupFile -o /dev/mapper/truecryptX A backup and test-restore of the system (with this method) seems to have worked fine (and the changed settings were reverted to the backup-state). The backup file is ~40 GB (and compressible down to <8GB with 7zip/LZMA2 on the "fast" setting). I can't quite believe that I'm the only one that wants to create images of encrypted drives, but doesn't want to waste 100GB on the backup of one single system state. So my question now is, given how simple this was, and that no one seems to mention anywhere that this is possible - did I miss something? or did I do something wrong? Is there any situation that I didn't think of where this method will fail? Obviously, the backup file needs to be stored in some other encrypted place in order to still remain confidential, since it is unencrypted. Also, in order to do a full "bare metal" restore, one would have to actually first (re-)install Windows, encrypt it, and only then restore the backup file. The funny thing however is that you won't need to backup any partition tables, etc. since the reinstall will effectively take care of that. Is there anything else? This is imho still a lot better than having sector-by-sector images..

  Read the article

• Why is the server performance so poor? What can be done to improve the speed of the server?

  - by fslsyed

  Very slow processing using Windows Server2008 R2 Standard with Service Pack One. Situation: Read a text file using the text data to populate a series of MS Sql tables. The converted data is used to generate monthly PDF invoice files; the PDF files are saved directly to the hard drive. The application is multi-threading with one thread used for the text conversion and three threads for PDF invoice generation. The text conversion is occurring concurrently with the invoice generation. Application Software: C# using Microsoft Visual Studio 2010 Ultimate. Crystal Report Writer 2011 with runtime 13_0_3 64 bit version. Targeted platform is x64; also tested as x86, and Any CPU with similar results. Microsoft .NET Framework 4.0. Microsoft Sql 2008 Issue: The software is running very slowly. The conversion of the text file is approximately six hundred fifty records per second and generation of the PDF files is approximately twelve invoices per minute. The text file to be converted is six hundred Meg with seven thousand invoices to be generated. The software was installed on three different machines from the same distribution files. The same text file was converted on each machine. The user executing the application was an administrator on each machine. The only variances were the machine and operating system. The configurations are as follows: Server: Operating System: Windows Server2008 R2 Standard 64-bit (6.1, Build7601) SP1 Service Pack: System Manufacturer: IBM System Model: System x3550 M3-[7944AC1]- BIOS: Default System BIOS Processor: Intel® Xeon® CPU E5620@ 2.4GHz (16 CPUs) Memory: 16384MB Notebook: Operating System: Windows 7 Home Premium Standard 64-bit (6.1, Build7601) System Manufacturer: Hewlett-Packard System Model: HP Pavilion dv7 Notebook PC BIOS: Default System BIOS Processor: AMD Phenom II N640 Dual-Core Processor 2.9GHz (2 CPUs) Memory: 6144MB Desktop: Operating System: Windows 7 Professional 64-bit (6.1, Build7601) SP1 System Manufacturer: Dell Inc. System Model: OptiPlex 960 BIOS: Phoenix ROM BIOS PLUS Version 1.10 A11 Processor: Intel Core™2 Quad CPU Q9650 @3.00GHZ (4 CPUs) Memory: 16384MB Processing results per machine: The applications were executed seven times with the averages being displayed below. Machine Text Records Invoices Generated Converted Per Minute Per Minute Server (1) 650 12 Notebook 980 17 Desktop 2,100 45 (1) The server is dedicated to execution of this application; no additional applications are being executed. Question: Why is the server performance so poor? What can be done to improve the speed of the server?

  Read the article

• debian packages version convention

  - by JackWu

  I'm using debian/Ubuntu, and get confused about versions of packages. When using dpkg -l command, I get: ii vim 2:7.3.429-2ubuntu2.1 Vi IMproved - enhanced vi editor ii vim-common 2:7.3.429-2ubuntu2.1 Vi IMproved - Common files ii vim-runtime 2:7.3.429-2ubuntu2.1 Vi IMproved - Runtime files ii vim-tiny 2:7.3.429-2ubuntu2.1 Vi IMproved - enhanced vi editor - compact version ii virt-what 1.11-1 detect if we are running in a virtual machine ii w3m 0.5.3-5ubuntu1 WWW browsable pager with excellent tables/frames support ii watershed 6 reduce superfluous executions of idempotent command ii wget 1.13.4-2ubuntu1 retrieves files from the web ii whiptail 0.52.11-2ubuntu10 Displays user-friendly dialog boxes from shell scripts ii whoopsie 0.1.33 Ubuntu crash database submission daemon ii wimlib9 1.5.0-1~webupd8~precise Library to extract, create, modify, and mount WIM files ii wimtools 1.5.0-1~webupd8~precise Tools to extract, create, modify, and mount WIM files ii wireless-tools 30~pre9-5ubuntu2 Tools for manipulating Linux Wireless Extensions ii wpasupplicant 0.7.3-6ubuntu2.1 client support for WPA and WPA2 (IEEE 802.11i) ii x11-common 1:7.6+12ubuntu2 X Window System (X.Org) infrastructure ii x11-utils 7.6+4ubuntu0.1 X11 utilities ii xauth 1:1.0.6-1 X authentication utility ii xbitmaps 1.1.1-1 Base X bitmaps ii xclip 0.12-1 command line interface to X selections ii xfonts-encodings 1:1.0.4-1ubuntu1 Encodings for X.Org fonts ii xfonts-utils 1:7.6+1 X Window System font utility programs ii xkb-data 2.5-1ubuntu1.3 X Keyboard Extension (XKB) configuration data ii xml-core 0.13 XML infrastructure and XML catalog file support rc xpdf 3.02-21build1 Portable Document Format (PDF) reader ii xterm 271-1ubuntu2.1 X terminal emulator ii xz-lzma 5.1.1alpha+20110809-3 XZ-format compression utilities - compatibility commands ii xz-utils 5.1.1alpha+20110809-3 XZ-format compression utilities ii zabbix-agent 1:1.8.11-1 network monitoring solution - agent ii zlib1g 1:1.2.3.4.dfsg-3ubuntu4 compression library - runtime ii zlib1g-dev 1:1.2.3.4.dfsg-3ubuntu4 compression library - development ii zsh 4.3.17-1ubuntu1 shell with lots of features The third column is version, but it all messed up in a way I can't understand. I mean, different packages use total different naming specification. Here are the major questions: Why there are ubuntu in them, and there are not? what all the special -~+ mean? alpha and build, dfsg, what are they? Can I just use them casually? vim and other packages have 2:, what does that mean? How version comparison works, since they can be so different? Can anyone please explain this to me? Or where can I find an official document? Thanks in advance.

  Read the article

• What the best way to achieve RPO of zero and lowest possible RTO (less than 15 minutes) with SQL 2008 R2?

  - by Adrian Hope-Bailie

  We are running a payments (EFT transaction processing) application which is processing high volumes of transactions 24/7 and are currently investigating a better way of doing DB replication to our disaster recovery site. Our current and previous strategies have included using both DoubleTake and Redgate to replicate data to a warm stand-by. DoubleTake is the supported solution from the payments software vendor however their (DoubleTake's) support in South Africa is very poor. We had a few issues and simply couldn't ever resolve them so we had to give up on DoubleTake. We have been using Redgate to manually read the data from the primary site (via queries) and write to the DR site but this is: A bad solution Getting the software vendor hot and bothered whenever we have support issues as it has a tendency to interfere with the payment application which is very DB intensive. We recently upgraded the whole system to run on SQL 2008 R2 Enterprise which means we should probably be looking at using some of the built-in replication features. The server has 2 fairly large databases with a mixture of tables containing highly volatile transactional data and pretty static configuration data. Replication would be done over a WAN link to a separate physical site and needs to achieve the following objectives. RPO: Zero loss - This is transactional data with financial impact so we can't lose anything. RTO: Tending to zero - The business depends on our ability to process transactions every minute we are down we are losing money I have looked at a few of the other questions/answers but none meet our case exactly: SQL Server 2008 failover strategy - Log shipping or replication? How to achieve the following RTO & RPO with logshipping only using SQL Server? What is the best of two approaches to achieve DB Replication? My current thinking is that we should use mirroring but I am concerned that for RPO:0 we will need to do delayed commits and this could impact the performance of the primary DB which is not an option. Our current DR process is to: Stop incoming traffic to the primary site and allow all in-flight transaction to complete. Allow the replication to DR to complete. Change network routing to route to DR site. Start all applications and services on the secondary site (Ideally we can change this to a warmer stand-by whereby the applications are already running but not processing any transactions). In other words the DR database needs to, as quickly as possible, catch up with primary and be ready for processing as the new primary. We would then need to be able to reverse this when we are ready to switch back. Is there a better option than mirroring (should we be doing log-shipping too) and can anyone suggest other considerations that we should keep in mind?

  Read the article

• How to disable or tune filesystem cache sharing for OpenVZ?

  - by gertvdijk

  For OpenVZ, an example of container-based virtualization, it seems that host and all guests are sharing the filesystem cache. This sounds paradoxical when talking about virtualization, but this is actually a feature of OpenVZ. It makes sense too. Because only one kernel is running, it's possible to benefit from sharing the same pages of filesystem cache in memory. And while it sounds beneficial, I think a set up here actually suffers in performance from it. Here's why I think why: my machines aren't actually sharing any files on disk so I can't benefit from this feature in OpenVZ. Several OpenVZ machines are running MySQL with MyISAM tables. MyISAM relies on the system's filesystem cache for caching of data files, unlike InnoDB's buffer pool. Also some virtual machines are known to do heavy and large I/O operations on the same filesystem in the host. For example, when running cat *.MYD > /dev/null on some large database in one machine, I saw the filesystem cache lowering in another, monitored by htop. This essentially flushes all the useful filesystem cache in guests (FIFO) and so it flushes the MySQL caches in the guests. Now users are complaining that MySQL is very slow. And it is. Some simple SELECT queries take several seconds on times disk I/O is heavily used by other machines. So, simply put: Is there a way to avoid filesystem cache being wiped out by other virtual machines in container-based virtualization? Some thoughts: Choosing algorithm for flushing filesystem cache in the kernel. (possible? how?) Reserving a certain amount of pages for a single VM. (seems no option for filesystem cache type of pages that reading man vzctl) Will running MySQL on another filesystem get me anywhere? If not, I think my alternatives are: Use KVM for MySQL-MyISAM running VMs. KVM actually assigns memory to the VM and does not allow swapping out caches unless using a balloon driver. Move to InnoDB and tune the buffer pools, dirty pages, etc. This is now considered to be 'nice to have' on the long-term as not everyone responsible for administration of the system understands InnoDB. more suggestions welcome. System software: Proxmox (now 1.9, could be upgraded to 2.x). One big LV assigned for the VMs.

  Read the article

• MySQL won't start, reinstall fails on Ubuntu 12.04

  - by Evils

  My problem started yesterday night when I tried to change the my.cnf config on my ubuntu 12.04 x64 System. I simply tried to changed the bind-address parameter from 127.0.0.1 to 0.0.0.0. A simple restart after a reboot gave this error: stop: Unknown instance: start: Job failed to start I tried to start mysql then by using 'mysqld' which outputs this: 130701 11:05:59 [Note] Plugin 'FEDERATED' is disabled. mysqld: Table 'mysql.plugin' doesn't exist 130701 11:05:59 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 130701 11:05:59 InnoDB: The InnoDB memory heap is disabled 130701 11:05:59 InnoDB: Mutexes and rw_locks use GCC atomic builtins 130701 11:05:59 InnoDB: Compressed tables use zlib 1.2.3.4 130701 11:05:59 InnoDB: Initializing buffer pool, size = 128.0M 130701 11:05:59 InnoDB: Completed initialization of buffer pool 130701 11:05:59 InnoDB: highest supported file format is Barracuda. 130701 11:05:59 InnoDB: Waiting for the background threads to start 130701 11:06:00 InnoDB: 5.5.31 started; log sequence number 1595675 130701 11:06:00 [Note] Server hostname (bind-address): '127.0.0.1'; port: 3306 130701 11:06:00 [Note] - '127.0.0.1' resolves to '127.0.0.1'; 130701 11:06:00 [Note] Server socket created on IP: '127.0.0.1'. 130701 11:06:00 [ERROR] Can't start server : Bind on unix socket: Permission denied 130701 11:06:00 [ERROR] Do you already have another mysqld server running on socket: /var/run/mysqld/mysqld.sock ? 130701 11:06:00 [ERROR] Aborting 130701 11:06:00 InnoDB: Starting shutdown... 130701 11:06:00 InnoDB: Shutdown completed; log sequence number 1595675 130701 11:06:00 [Note] mysqld: Shutdown complete Meanwhile I already tried to reinstall and purge the complete mysql package which results in another error which says that dpkg cant change the admins password. While this error appeared another error came with it. When trying to install something new with apt, it always says 'fopen: permission denied' right after it tries to update my man-db. This is my dmesg output: [ 6879.687998] type=1400 audit(1372669683.397:36): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=9336 comm="apparmor_parser" [ 6881.323215] init: mysql main process (9340) terminated with status 1 [ 6881.323316] init: mysql respawning too fast, stopped Any help will be appreciated as this is a productive server which renders useless without mysql.

  Read the article

• MySQL performance over a (local) network much slower than I would expect

  - by user15241

  MySQL queries in my production environment are taking much longer than I would expect them too. The site in question is a fairly large Drupal site, with many modules installed. The webserver (Nginx) and database server (mysql) are hosted on separated machines, connected by a 100mbps LAN connection (hosted by Rackspace). I have the exact same site running on my laptop for development. Obviously, on my laptop, the webserver and database server are on the same box. Here are the results of my database query times: Production: Executed 291 queries in 320.33 milliseconds. (homepage) Executed 517 queries in 999.81 milliseconds. (content page) Development: Executed 316 queries in 46.28 milliseconds. (homepage) Executed 586 queries in 79.09 milliseconds. (content page) As can clearly be seen from these results, the time involved with querying the MySQL database is much shorter on my laptop, where the MySQL server is running on the same database as the web server. Why is this?! One factor must be the network latency. On average, a round trip from from the webserver to the database server takes 0.16ms (shown by ping). That must be added to every singe MySQL query. So, taking the content page example above, where there are 517 queries executed. Network latency alone will add 82ms to the total query time. However, that doesn't account for the difference I am seeing (79ms on my laptop vs 999ms on the production boxes). What other factors should I be looking at? I had thought about upgrading the NIC to a gigabit connection, but clearly there is something else involved. I have run the MySQL performance tuning script from http://www.day32.com/MySQL/ and it tells me that my database server is configured well (better than my laptop apparently). The only problem reported is "Of 4394 temp tables, 48% were created on disk". This is true in both environments and in the production environment I have even tried increasing max_heap_table_size and Current tmp_table_size to 1GB, with no change (I think this is because I have some BLOB and TEXT columns).

  Read the article

• git | error: Unable to append to .git/logs/refs/remotes/origin/master: Permission denied [SOLVED]

  - by Corbin Tarrant

  I am having a strange issue that I can't seem to resolve. Here is what happend: I had some log files in a github repository that I didn't want there. I found this script that removes files completely from git history like so: #!/bin/bash set -o errexit # Author: David Underhill # Script to permanently delete files/folders from your git repository. To use # it, cd to your repository's root and then run the script with a list of paths # you want to delete, e.g., git-delete-history path1 path2 if [ $# -eq 0 ]; then exit 0are still fi # make sure we're at the root of git repo if [ ! -d .git ]; then echo "Error: must run this script from the root of a git repository" exit 1 fi # remove all paths passed as arguments from the history of the repo files=$@ git filter-branch --index-filter "git rm -rf --cached --ignore-unmatch $files" HEAD # remove the temporary history git-filter-branch otherwise leaves behind for a long time rm -rf .git/refs/original/ && git reflog expire --all && git gc --aggressive --prune I, of course, made a backup first and then tried it. It seemed to work fine. I then did a git push -f and was greeted with the following messages: error: Unable to append to .git/logs/refs/remotes/origin/master: Permission denied error: Cannot update the ref 'refs/remotes/origin/master'. Everything seems to have pushed fine though, because the files seem to be gone from the GitHub repository, if I try and push again I get the same thing: error: Unable to append to .git/logs/refs/remotes/origin/master: Permission denied error: Cannot update the ref 'refs/remotes/origin/master'. Everything up-to-date EDIT $ sudo chgrp {user} .git/logs/refs/remotes/origin/master $ sudo chown {user} .git/logs/refs/remotes/origin/master $ git push Everything up-to-date Thanks! EDIT Uh Oh. Problem. I've been working on this project all night and just went to commit my changes: error: Unable to append to .git/logs/refs/heads/master: Permission denied fatal: cannot update HEAD ref So I: sudo chown {user} .git/logs/refs/heads/master sudo chgrp {user} .git/logs/refs/heads/master I try the commit again and I get: error: Unable to append to .git/logs/HEAD: Permission denied fatal: cannot update HEAD ref So I: sudo chown {user} .git/logs/HEAD sudo chgrp {user} .git/logs/HEAD And then I try the commit again: 16 files changed, 499 insertions(+), 284 deletions(-) create mode 100644 logs/DBerrors.xsl delete mode 100644 logs/emptyPHPerrors.php create mode 100644 logs/trimXMLerrors.php rewrite public/codeCore/Classes/php/DatabaseConnection.php (77%) create mode 100644 public/codeSite/php/init.php $ git push Counting objects: 49, done. Delta compression using up to 2 threads. Compressing objects: 100% (27/27), done. Writing objects: 100% (27/27), 7.72 KiB, done. Total 27 (delta 15), reused 0 (delta 0) To [email protected]:IAmCorbin/MooKit.git 59da24e..68b6397 master -> master Hooray. I jump on http://GitHub.com and check out the repository, and my latest commit is no where to be found. ::scratch head:: So I push again: Everything up-to-date Umm...it doesn't look like it. I've never had this issue before, could this be a problem with github? or did I mess something up with my git project? EDIT Nevermind, I did a simple: git push origin master and it pushed fine.

  Read the article

• The model item passed into the dictionary is of type ‘mvc.Models.ModelA’ but this dictionary require

  - by Malcolm Frexner

  I have this annoying mistake in some of my builds. There is no error in the project, because if I build again, then the problem disappears. The message only appears, when the site is deployed to a Windows 2008 Server. I first thought that it might be an issue with temporary files, but thats not the case. I deployed the build to a different web and the error still appears. The error appears on random actions of the site. Most of the time builds are ok, but each 3rd or 4th build produces runtime errors. I build using a WebdeploymentProject in release mode. Views are precompiled. It's not http://stackoverflow.com/questions/178194/in-asp-net-mvc-i-encounter-an-incorrect-type-error-when-rendering-a-page-with-the, because views have totally different names. How I can debug this problem or how I can get help for this? Here is my WebDeploymentProject <!-- Microsoft Visual Studio 2008 Web Deployment Project http://go.microsoft.com/fwlink/?LinkID=104956 --> <Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <PropertyGroup> <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration> <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform> <ProductVersion>9.0.21022</ProductVersion> <SchemaVersion>2.0</SchemaVersion> <ProjectGuid>{E5E14CEB-0BCD-4203-9A5A-34ABA9C717EA}</ProjectGuid> <SourceWebPhysicalPath>..\B2CWeb</SourceWebPhysicalPath> <SourceWebProject>{3E632DB6-6DB3-4BD0-8CCA-12DE67165B48}|B2CWeb\B2CWeb.csproj</SourceWebProject> <SourceWebVirtualPath>/B2CWeb.csproj</SourceWebVirtualPath> <TargetFrameworkVersion>v3.5</TargetFrameworkVersion> </PropertyGroup> <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' "> <DebugSymbols>true</DebugSymbols> <OutputPath>.\Debug</OutputPath> <EnableUpdateable>false</EnableUpdateable> <UseMerge>true</UseMerge> <SingleAssemblyName>B2CWeb_Build</SingleAssemblyName> </PropertyGroup> <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' "> <DebugSymbols>false</DebugSymbols> <OutputPath>..\B2CWeb_Deploy\</OutputPath> <EnableUpdateable>false</EnableUpdateable> <UseMerge>true</UseMerge> <SingleAssemblyName>B2C_Web</SingleAssemblyName> <ContentAssemblyName> </ContentAssemblyName> <DeleteAppCodeCompiledFiles>false</DeleteAppCodeCompiledFiles> </PropertyGroup> <ItemGroup> </ItemGroup> <Import Project="$(MSBuildExtensionsPath)\Microsoft\WebDeployment\v9.0\Microsoft.WebDeployment.targets" /> <!-- To modify your build process, add your task inside one of the targets below and uncomment it. Other similar extension points exist, see Microsoft.WebDeployment.targets. <Target Name="BeforeBuild"> </Target> <Target Name="BeforeMerge"> </Target> <Target Name="AfterMerge"> </Target> <Target Name="AfterBuild"> </Target> --> </Project>

  Read the article

• using Silverlight 3's HtmlPage.Window.Navigate method to reuse an already open browser window

  - by Phil

  Hi, I want to use an external browser window to implement a preview functionality in a silverlight application. There is a list of items and whenever the user clicks one of these items, it's opened in a separate browser window (the content is a pdf document, which is why it is handled ouside of the SL app). Now, to achieve this, I simply use HtmlPage.Window.Navigate(new Uri("http://www.bing.com")); which works fine. Now my client doesn't like the fact that every click opens up a new browser window. He would like to see the browser window reused every time an item is clicked. So I went out and tried implementing this: Option 1 - Use the overload of the Navigate method, like so: HtmlPage.Window.Navigate(new Uri("http://www.bing.com"), "foo"); I was assuming that the window would be reused when the same target parameter value (foo) would be used in subsequent calls. This does not work. I get a new window every time. Option 2 - Use the PopupWindow method on the HtmlPage HtmlPage.PopupWindow(new Uri("http://www.bing.com"), "blah", new HtmlPopupWindowOptions()); This does not work. I get a new window every time. Option 3 - Get a handle to the opened window and reuse that in subsequent calls private HtmlWindow window; private void navigationButton_Click(object sender, RoutedEventArgs e) { if (window == null) window = HtmlPage.Window.Navigate(new Uri("http://www.bing.com"), "blah"); else window.Navigate(new Uri("http://www.bing.com"), "blah"); if (window == null) MessageBox.Show("it's null"); } This does not work. I tried the same for the PopupWindow() method and the window is null every time, so a new window is opened on every click. I have checked both the EnableHtmlAccess and the IsPopupWindowAllowed properties, and they return true, as they should. Option 4 - Use Eval method to execute some custom javascript private const string javascript = @"var popup = window.open('', 'blah') ; if(popup.location != 'http://www.bing.com' ){ popup.location = 'http://www.bing.com'; } popup.focus();"; private void navigationButton_Click(object sender, RoutedEventArgs e) { HtmlPage.Window.Eval(javascript); } This does not work. I get a new window every time. option 5 - Use CreateInstance to run some custom javascript on the page private void navigationButton_Click(object sender, RoutedEventArgs e) { HtmlPage.Window.CreateInstance("thisIsPlainHell"); } and in my aspx I have function thisIsPlainHell() { var popup = window.open('http://www.bing.com', 'blah'); popup.focus(); } Guess what? This does work. The only thing is that the window behaves a little strange and I'm not sure why: I'm behind a proxy and in all other scenarios I'm being prompted for my password. In this case however I am not (and am thus not able to reach the external site - bing in this case). This is not really a huge issue atm, but I just don't understand what's goign on here. Whenever I type another url in the address bar of the popup window (eg www.google.com) and press enter, it opens up another window and prompts me for my proxy password. As a temporary solution option 5 could do, but I don't like the fact that Silverlight is not able to manage this. One of the main reasons my client has opted for Silverlight is to be protected against all the browser specific hacking that comes with javascript. Am I doing something wrong? I'm definitely no javascript expert, so I'm hoping it's something obvious I'm missing here. Cheers, Phil

  Read the article

• Call Webservice without adding a WebReference - with Complex Types

  - by ck

  I'm using the code at This Site to call a webservice dynamically. [SecurityPermissionAttribute(SecurityAction.Demand, Unrestricted = true)] public static object CallWebService(string webServiceAsmxUrl, string serviceName, string methodName, object[] args) { System.Net.WebClient client = new System.Net.WebClient(); //-Connect To the web service using (System.IO.Stream stream = client.OpenRead(webServiceAsmxUrl + "?wsdl")) { //--Now read the WSDL file describing a service. ServiceDescription description = ServiceDescription.Read(stream); ///// LOAD THE DOM ///////// //--Initialize a service description importer. ServiceDescriptionImporter importer = new ServiceDescriptionImporter(); importer.ProtocolName = "Soap12"; // Use SOAP 1.2. importer.AddServiceDescription(description, null, null); //--Generate a proxy client. importer.Style = ServiceDescriptionImportStyle.Client; //--Generate properties to represent primitive values. importer.CodeGenerationOptions = System.Xml.Serialization.CodeGenerationOptions.GenerateProperties; //--Initialize a Code-DOM tree into which we will import the service. CodeNamespace nmspace = new CodeNamespace(); CodeCompileUnit unit1 = new CodeCompileUnit(); unit1.Namespaces.Add(nmspace); //--Import the service into the Code-DOM tree. This creates proxy code //--that uses the service. ServiceDescriptionImportWarnings warning = importer.Import(nmspace, unit1); if (warning == 0) //--If zero then we are good to go { //--Generate the proxy code CodeDomProvider provider1 = CodeDomProvider.CreateProvider("CSharp"); //--Compile the assembly proxy with the appropriate references string[] assemblyReferences = new string[5] { "System.dll", "System.Web.Services.dll", "System.Web.dll", "System.Xml.dll", "System.Data.dll" }; CompilerParameters parms = new CompilerParameters(assemblyReferences); CompilerResults results = provider1.CompileAssemblyFromDom(parms, unit1); //-Check For Errors if (results.Errors.Count > 0) { StringBuilder sb = new StringBuilder(); foreach (CompilerError oops in results.Errors) { sb.AppendLine("========Compiler error============"); sb.AppendLine(oops.ErrorText); } throw new System.ApplicationException("Compile Error Occured calling webservice. " + sb.ToString()); } //--Finally, Invoke the web service method Type foundType = null; Type[] types = results.CompiledAssembly.GetTypes(); foreach (Type type in types) { if (type.BaseType == typeof(System.Web.Services.Protocols.SoapHttpClientProtocol)) { Console.WriteLine(type.ToString()); foundType = type; } } object wsvcClass = results.CompiledAssembly.CreateInstance(foundType.ToString()); MethodInfo mi = wsvcClass.GetType().GetMethod(methodName); return mi.Invoke(wsvcClass, args); } else { return null; } } } This works fine when I use built in types, but for my own classes, I get this: Event Type: Error Event Source: TDX Queue Service Event Category: None Event ID: 0 Date: 12/04/2010 Time: 12:12:38 User: N/A Computer: TDXRMISDEV01 Description: System.ArgumentException: Object of type 'TDXDataTypes.AgencyOutput' cannot be converted to type 'AgencyOutput'. Server stack trace: at System.RuntimeType.CheckValue(Object value, Binder binder, CultureInfo culture, BindingFlags invokeAttr) at System.Reflection.MethodBase.CheckArguments(Object[] parameters, Binder binder, BindingFlags invokeAttr, CultureInfo culture, Signature sig) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at System.Reflection.MethodBase.Invoke(Object obj, Object[] parameters) at TDXQueueEngine.GenericWebserviceProxy.CallWebService(String webServiceAsmxUrl, String serviceName, String methodName, Object[] args) in C:\CkAdmDev\TDXQueueEngine\TDXQueueEngine\TDXQueueEngine\GenericWebserviceProxy.cs:line 76 at TDXQueueEngine.TDXQueueWebserviceItem.Run() in C:\CkAdmDev\TDXQueueEngine\TDXQueueEngine\TDXQueueEngine\TDXQueueWebserviceItem.cs:line 99 at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(RuntimeMethodHandle md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase) at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData) at TDXQueueEngine.TDXQueue.RunProcess.EndInvoke(IAsyncResult result) at TDXQueueEngine.TDXQueue.processComplete(IAsyncResult ar) in C:\CkAdmDev\TDXQueueEngine\TDXQueueEngine\TDXQueueEngine\TDXQueue.cs:line 130 For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. The classes reference the same assembly and the same version. Do I need to include my assembly as a reference when building the temporary assembly? If so, how? Thanks.

  Read the article

• SWFupload adding extra extension?

  - by st4ck0v3rfl0w

  Hi Everyone, I've been struggling with this for a half day and can't seem to figure out why SWFupload is adding an extra extension to my uploads? (e.g. burer.jpg.jpg) I've reviewed the below code a thousand times and can't figure out why my files (whether png, gif or jpg) get an added .jpg extension? <?php $POST_MAX_SIZE = ini_get('post_max_size'); $unit = strtoupper(substr($POST_MAX_SIZE, -1)); $multiplier = ($unit == 'M' ? 1048576 : ($unit == 'K' ? 1024 : ($unit == 'G' ? 1073741824 : 1))); if ((int)$_SERVER['CONTENT_LENGTH'] > $multiplier*(int)$POST_MAX_SIZE && $POST_MAX_SIZE) { header("HTTP/1.1 500 Internal Server Error"); // This will trigger an uploadError event in SWFUpload echo "POST exceeded maximum allowed size."; exit(0); } // Settings $save_path = "/home/images/"; $upload_name = "image"; $max_file_size_in_bytes = 2147483647; // 2GB in bytes $extension_whitelist = array("jpg", "gif", "png", "jpeg"); // Allowed file extensions $valid_chars_regex = '.A-Z0-9_ !@#$%^&()+={}\[\]\',~`-'; // Characters allowed in the file name (in a Regular Expression format) // Other variables $MAX_FILENAME_LENGTH = 260; $file_name = ""; $file_extension = ""; $uploadErrors = array( 0=>"There is no error, the file uploaded successfully", 1=>"The uploaded file exceeds the upload_max_filesize directive in php.ini", 2=>"The uploaded file exceeds the MAX_FILE_SIZE directive that was specified in the HTML form", 3=>"The uploaded file was only partially uploaded", 4=>"No file was uploaded", 6=>"Missing a temporary folder" ); // Validate the upload if (!isset($_FILES[$upload_name])) { HandleError("No upload found in \$_FILES for " . $upload_name); exit(0); } else if (isset($_FILES[$upload_name]["error"]) && $_FILES[$upload_name]["error"] != 0) { HandleError($uploadErrors[$_FILES[$upload_name]["error"]]); exit(0); } else if (!isset($_FILES[$upload_name]["tmp_name"]) || !@is_uploaded_file($_FILES[$upload_name]["tmp_name"])) { HandleError("Upload failed is_uploaded_file test."); exit(0); } else if (!isset($_FILES[$upload_name]['name'])) { HandleError("File has no name."); exit(0); } // Validate the file size (Warning: the largest files supported by this code is 2GB) $file_size = @filesize($_FILES[$upload_name]["tmp_name"]); if (!$file_size || $file_size > $max_file_size_in_bytes) { HandleError("File exceeds the maximum allowed size"); exit(0); } if ($file_size <= 0) { HandleError("File size outside allowed lower bound"); exit(0); } // Validate file name (for our purposes we'll just remove invalid characters) $file_name = preg_replace('/[^'.$valid_chars_regex.']|\.+$/i', "", $_FILES[$upload_name]['name']); if (strlen($file_name) == 0 || strlen($file_name) > $MAX_FILENAME_LENGTH) { HandleError("Invalid file name"); exit(0); } // Validate file extension $path_info = pathinfo($_FILES[$upload_name]['name']); $file_extension = $path_info["extension"]; $is_valid_extension = false; foreach ($extension_whitelist as $extension) { if (strcasecmp($file_extension, $extension) == 0) { $is_valid_extension = true; break; } } if (!$is_valid_extension) { HandleError("Invalid file extension"); exit(0); } if (!@move_uploaded_file($_FILES[$upload_name]["tmp_name"], $save_path.$file_name)) { HandleError("File could not be saved."); exit(0); } HandleError($_FILES[$upload_name]['name']); exit(0); function HandleError($message) { echo $message; } ?>

  Read the article

• Using windows command line from Pascal

  - by Jordan

  I'm trying to use some windows command line tools from within a short Pascal program. To make it easier, I'm writing a function called DoShell which takes a command line string as an argument and returns a record type called ShellResult, with one field for the process's exitcode and one field for the process's output text. I'm having major problems with some standard library functions not working as expected. The DOS Exec() function is not actually carrying out the command i pass to it. The Reset() procedure gives me a runtime error RunError(2) unless i set the compiler mode {I-}. In that case i get no runtime error, but the Readln() functions that i use on that file afterwards don't actually read anything, and furthermore the Writeln() functions used after that point in the code execution do nothing as well. Here's the source code of my program so far. I'm using Lazarus 0.9.28.2 beta, with Free Pascal Compiler 2.24 program project1; {$mode objfpc}{$H+} uses Classes, SysUtils, StrUtils, Dos { you can add units after this }; {$IFDEF WINDOWS}{$R project1.rc}{$ENDIF} type ShellResult = record output : AnsiString; exitcode : Integer; end; function DoShell(command: AnsiString): ShellResult; var exitcode: Integer; output: AnsiString; exepath: AnsiString; exeargs: AnsiString; splitat: Integer; F: Text; readbuffer: AnsiString; begin //Initialize variables exitcode := 0; output := ''; exepath := ''; exeargs := ''; splitat := 0; readbuffer := ''; Result.exitcode := 0; Result.output := ''; //Split command for processing splitat := NPos(' ', command, 1); exepath := Copy(command, 1, Pred(splitat)); exeargs := Copy(command, Succ(splitat), Length(command)); //Run command and put output in temporary file Exec(FExpand(exepath), exeargs + ' __output'); exitcode := DosExitCode(); //Get output from file Assign(F, '__output'); Reset(F); Repeat Readln(F, readbuffer); output := output + readbuffer; readbuffer := ''; Until Eof(F); //Set Result Result.exitcode := exitcode; Result.output := output; end; var I : AnsiString; R : ShellResult; begin Writeln('Enter a command line to run.'); Readln(I); R := DoShell(I); Writeln('Command Exit Code:'); Writeln(R.exitcode); Writeln('Command Output:'); Writeln(R.output); end.

  Read the article

• Java: micro-optimizing array manipulation

  - by Martin Wiboe

  Hello all, I am trying to make a Java port of a simple feed-forward neural network. This obviously involves lots of numeric calculations, so I am trying to optimize my central loop as much as possible. The results should be correct within the limits of the float data type. My current code looks as follows (error handling & initialization removed): /** * Simple implementation of a feedforward neural network. The network supports * including a bias neuron with a constant output of 1.0 and weighted synapses * to hidden and output layers. * * @author Martin Wiboe */ public class FeedForwardNetwork { private final int outputNeurons; // No of neurons in output layer private final int inputNeurons; // No of neurons in input layer private int largestLayerNeurons; // No of neurons in largest layer private final int numberLayers; // No of layers private final int[] neuronCounts; // Neuron count in each layer, 0 is input // layer. private final float[][][] fWeights; // Weights between neurons. // fWeight[fromLayer][fromNeuron][toNeuron] // is the weight from fromNeuron in // fromLayer to toNeuron in layer // fromLayer+1. private float[][] neuronOutput; // Temporary storage of output from previous layer public float[] compute(float[] input) { // Copy input values to input layer output for (int i = 0; i < inputNeurons; i++) { neuronOutput[0][i] = input[i]; } // Loop through layers for (int layer = 1; layer < numberLayers; layer++) { // Loop over neurons in the layer and determine weighted input sum for (int neuron = 0; neuron < neuronCounts[layer]; neuron++) { // Bias neuron is the last neuron in the previous layer int biasNeuron = neuronCounts[layer - 1]; // Get weighted input from bias neuron - output is always 1.0 float activation = 1.0F * fWeights[layer - 1][biasNeuron][neuron]; // Get weighted inputs from rest of neurons in previous layer for (int inputNeuron = 0; inputNeuron < biasNeuron; inputNeuron++) { activation += neuronOutput[layer-1][inputNeuron] * fWeights[layer - 1][inputNeuron][neuron]; } // Store neuron output for next round of computation neuronOutput[layer][neuron] = sigmoid(activation); } } // Return output from network = output from last layer float[] result = new float[outputNeurons]; for (int i = 0; i < outputNeurons; i++) result[i] = neuronOutput[numberLayers - 1][i]; return result; } private final static float sigmoid(final float input) { return (float) (1.0F / (1.0F + Math.exp(-1.0F * input))); } } I am running the JVM with the -server option, and as of now my code is between 25% and 50% slower than similar C code. What can I do to improve this situation? Thank you, Martin Wiboe

  Read the article

• JpegBitmapEncoder.Save() throws exception when writing image with metadata to MemoryStream

  - by Dmitry

  I am trying to set up metadata on JPG image what does not have it. You can't use in-place writer (InPlaceBitmapMetadataWriter) in this case, cuz there is no place for metadata in image. If I use FileStream as output - everything works fine. But if I try to use MemoryStream as output - JpegBitmapEncoder.Save() throws an exception (Exception from HRESULT: 0xC0000005). After some investigation I also found out what encoder can save image to memory stream if I supply null instead of metadata. I've made a very simplified and short example what reproduces the problem: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.IO; using System.Drawing; using System.Drawing.Imaging; using System.Windows.Media.Imaging; namespace JpegSaveTest { class Program { public static JpegBitmapEncoder SetUpMetadataOnStream(Stream src, string title) { uint padding = 2048; BitmapDecoder original; BitmapFrame framecopy, newframe; BitmapMetadata metadata; JpegBitmapEncoder output = new JpegBitmapEncoder(); src.Seek(0, SeekOrigin.Begin); original = JpegBitmapDecoder.Create(src, BitmapCreateOptions.PreservePixelFormat, BitmapCacheOption.OnLoad); if (original.Frames[0] != null) { framecopy = (BitmapFrame)original.Frames[0].Clone(); if (original.Frames[0].Metadata != null) metadata = original.Frames[0].Metadata.Clone() as BitmapMetadata; else metadata = new BitmapMetadata("jpeg"); metadata.SetQuery("/app1/ifd/PaddingSchema:Padding", padding); metadata.SetQuery("/app1/ifd/exif/PaddingSchema:Padding", padding); metadata.SetQuery("/xmp/PaddingSchema:Padding", padding); metadata.SetQuery("System.Title", title); newframe = BitmapFrame.Create(framecopy, framecopy.Thumbnail, metadata, original.Frames[0].ColorContexts); output.Frames.Add(newframe); } else { Exception ex = new Exception("Image contains no frames."); throw ex; } return output; } public static MemoryStream SetTagsInMemory(string sfname, string title) { Stream src, dst; JpegBitmapEncoder output; src = File.Open(sfname, FileMode.Open, FileAccess.Read, FileShare.Read); output = SetUpMetadataOnStream(src, title); dst = new MemoryStream(); output.Save(dst); src.Close(); return (MemoryStream)dst; } static void Main(string[] args) { string filename = "Z:\\dotnet\\gnom4.jpg"; MemoryStream s; s = SetTagsInMemory(filename, "test title"); } } } It is simple console application. To run it, replace filename variable content with path to any .jpg file without metadata (or use mine). Ofc I can just save image to temporary file first, close it, then open and copy to MemoryStream, but its too dirty and slow workaround. Any ideas about getting this working are welcome :)

  Read the article

• Taking screenshots in Windows Vista, Windows 7, with transparent areas outside the app region

  - by Steve Sheldon

  Hey Folks, I am trying to take a screenshot of an application and I would like to make the parts of the rectangle that are not part of the applications region be transparent. So for instance on a standard windows application I would like to make the rounded corners transparent. I wrote a quick test application which works on on XP (or vista/windows 7 with aero turned off): protected override void OnPaint(PaintEventArgs e) { base.OnPaint(e); Graphics g = e.Graphics; // Just find a window to test with IntPtr hwnd = FindWindowByCaption(IntPtr.Zero, "Calculator"); WINDOWINFO info = new WINDOWINFO(); info.cbSize = (uint)Marshal.SizeOf(info); GetWindowInfo(hwnd, ref info); Rectangle r = Rectangle.FromLTRB(info.rcWindow.Left, info.rcWindow.Top, info.rcWindow.Right, info.rcWindow.Bottom); IntPtr hrgn = CreateRectRgn(info.rcWindow.Left, info.rcWindow.Top, info.rcWindow.Right, info.rcWindow.Bottom); GetWindowRgn(hwnd, hrgn); // fill a rectangle which would be where I would probably // write some mask color g.FillRectangle(Brushes.Red, r); // fill the region over the top, all I am trying to do here // is show the contrast between the applications region and // the rectangle that the region would be placed in Region region = Region.FromHrgn(hrgn); region.Translate(info.rcWindow.Left, info.rcWindow.Top); g.FillRegion(Brushes.Blue, region); } Quick side note: before commenting that this code is doing stuff it shouldn't (or should do, like dispose) in a paint function, I know, it's not going anywhere but this post and is designed purely as a way to quickly show the problem, and that it does... OK, back to the problem ;) When I run this test app on XP (or Vista/Windows 7 with Aero off), I get something like this, which is great because I can eek an xor mask out of this that can be used later with BitBlt. Here is the problem, on Vista or Windows 7 with Aero enabled, there isn't necessarily a region on the window, in fact in most cases there isn't. Can anybody help me figure out how to get the region of the application like this on these platforms. Here are some of the approaches I have already tried... 1. Using the PrintWindow function: This doesn't work because it gives back a screenshot taken of the window with Aero off and this window is a different shape from the window returned with Aero on 2 Using the Desktop Window Manager API to get a full size thumbnail: This didn't work because it draws directly to the screen and from what I can tell you can't get a screenshot directly out of this api. Yeah, I could open a window with a pink background, show the thumbnail, take a screenshot then hide this temporary window but thats a horrible user experience and a complete hack I would rather not have my name on. 3. Using Graphics.CopyFromScreen or some other pinvoke variant of this: This doesn't work because I can't assume that the window I need information from is at the top of the z-order on the screen. Right now, the best solution I can think of is to special case Aero on Windows 7 and Vista to manually rub out the corners by hard coding some graphics paths I paint out but this solution would suck since any application that performs custom skinning will break this. Can you think of another or better solution? If you are here, thanks for taking time to read this post, I appreciate any help or direction that you can offer!

  Read the article

• jquery ajax and php arrays

  - by sea_1987

  Hi There, I am trying to submit some data to a PHP script, however the PHP scripts expects the data to arrive in a specific format, like this example which is a dump of the post, Array ( [save] => Add to shortlist [cv_file] => Array ( [849709537] => Y [849709616] => Y [849709633] => Y ) ) The process is currently that a user selects the product they want using checkboxes and then clicks a submit button which fires the PHP scripts, The HTML looks like this, div class="row"> <ul> <li class="drag_check ui-draggable"> <input type="checkbox" id="inp_cv_849709537" name="cv_file[849709537]" class="cv_choice" value="Y"> </li> <li class="id"><a href="/search/cv/849709537">849709537</a></li> <div class="disp"> <li class="location">Huddersfield</li> <li class="status"> Not currently working </li> <li class="education">other</li> <li class="role"> Temporary </li> <li class="salary">£100,000 or more</li> <div class="s">&nbsp;</div> </div> </ul> <dl> <dt>Current Role</dt> <dd>Developer </dd> <dt>Sectors</dt><dt> </dt><dd> Energy &amp; Utilities, Healthcare, Hospitality &amp; Travel, Installation &amp; Maintenance, Installation &amp; Maintenance </dd> <dt>About Me</dt><dt> </dt><dd></dd> </dl> <div class="s"></div> </div> I am needing to use AJAX instead now, but I need to send the data to PHP in the format it expects here is what I have so far, $('#addshortlist').click(function() { var datastring = ui.draggable.children().attr('name')+"="+ui.draggable.children().val()+"&save=Add to shortlist"; alert(datastring); $.ajax({ type: 'POST', url: '/search', data:ui.draggable.children().attr('name')+"="+ui.draggable.children().val()+"&save=Add to shortlist", success:function(){ alert("Success"+datastring); }, error:function() { alert("Fail"+datastring); } }); return false; }); I would really appreciate any help

  Read the article

< Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >