Search Results

Search found 11082 results on 444 pages for 'autovue 20 0'.

Page 375/444 | < Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >

• How to Increase the VMWare Boot Screen Delay

  - by Trevor Bekolay

  If you’ve wanted to try out a bootable CD or USB flash drive in a virtual machine environment, you’ve probably noticed that VMWare’s offerings make it difficult to change the boot device. We’ll show you how to change these options. You can do this either for one boot, or permanently for a particular virtual machine. Even experienced users of VMWare Player or Workstation may not recognize the screen above – it’s the virtual machine’s BIOS, which in most cases flashes by in the blink of an eye. If you want to boot up the virtual machine with a CD or USB key instead of the hard drive, then you’ll need more than an eye’s-blink to press Escape and bring up the Boot Menu. Fortunately, there is a way to introduce a boot delay that isn’t exposed in VMWare’s graphical interface – you have to edit the virtual machine’s settings file (a .vmx file) manually. Editing the Virtual Machine’s .vmx Find the .vmx file that contains the settings for your virtual machine. You chose a location for this when you created the virtual machine – in Windows, the default location is a folder called My Virtual Machines in your My Documents folder. In VMWare Workstation, the location of the .vmx file is listed on the virtual machine’s tab. If in doubt, search your hard drive for .vmx files. If you don’t want to use Windows default search, an awesome utility that locates files instantly is Everything. Open the .vmx file with any text editor. Somewhere in this file, enter in the following line… save the file, then close out of the text editor: bios.bootdelay = 20000 This will introduce a 20 second delay when the virtual machine loads up, giving you plenty of time to press the Escape button and access the boot menu. The number in this line is just a value in milliseconds, so for a five second boot delay, enter 5000, and so on. Change Boot Options Temporarily Now, when you boot up your virtual machine, you’ll have plenty of time to enter one of the keystrokes listed at the bottom of the BIOS screen on boot-up. Press Escape to bring up the Boot Menu. This allows you to select a different device to boot from – like a CD drive. Your selection will be forgotten the next time you boot up this virtual machine. Change Boot Options Permanently When the BIOS screen comes up, press F2 to enter the BIOS Setup menu. Switch to the Boot tab, and change the ordering of the items by pressing the “+” key to move items up on the list, and the “-” key to move items down the list. We’ve switched the order so that the CD-ROM Drive boots first. Once you make this change permanent, you may want to re-edit the .vmx file to remove the boot delay. Boot from a USB Flash Drive One thing that is noticeably missing from the list of boot options is a USB device. VMWare’s BIOS just does not allow this, but we can get around that limitation using the PLoP Boot Manager that we’ve previously written about. And as a bonus, since everything is virtual anyway, there’s no need to actually burn PLoP to a CD. Open the settings for the virtual machine you want to boot with a USB drive. Click on Add… at the bottom of the settings screen, and select CD/DVD Drive. Click Next. Click the Use ISO Image radio button, and click Next. Browse to find plpbt.iso or plpbtnoemul.iso from the PLoP zip file. Ensure that Connect at power on is checked, and then click Finish. Click OK on the main Virtual Machine Settings page. Now, if you use the steps above to boot using that CD/DVD drive, PLoP will load, allowing you to boot from a USB drive! Conclusion We’re big fans of VMWare Player and Workstation, as they let us try out a ton of geeky things without worrying about harming our systems. By introducing a boot delay, we can add bootable CDs and USB drives to the list of geeky things we can try out. Download PLoP Boot Manager Similar Articles Productive Geek Tips How To Switch to Console Mode for Ubuntu VMware GuestHack: Turn Off Debug Mode in VMWare Workstation 6 BetaStart Your Computer More Quickly by Delaying the Startup of a Service in VistaEnable Hidden BootScreen in Windows VistaEnable Copy and Paste from Ubuntu VMware Guest TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error

  Read the article

• Measuring Usability with Common Industry Format (CIF) Usability Tests

  - by Applications User Experience

  Sean Rice, Manager, Applications User Experience A User-centered Research and Design Process The Oracle Fusion Applications user experience was five years in the making. The development of this suite included an extensive and comprehensive user experience design process: ethnographic research, low-fidelity workflow prototyping, high fidelity user interface (UI) prototyping, iterative formative usability testing, development feedback and iteration, and sales and customer evaluation throughout the design cycle. However, this process does not stop when our products are released. We conduct summative usability testing using the ISO 25062 Common Industry Format (CIF) for usability test reports as an organizational framework. CIF tests allow us to measure the overall usability of our released products.  These studies provide benchmarks that allow for comparisons of a specific product release against previous versions of our product and against other products in the marketplace. What Is a CIF Usability Test? CIF refers to the internationally standardized method for reporting usability test findings used by the software industry. The CIF is based on a formal, lab-based test that is used to benchmark the usability of a product in terms of human performance and subjective data. The CIF was developed and is endorsed by more than 375 software customer and vendor organizations led by the National Institute for Standards and Technology (NIST), a US government entity. NIST sponsored the CIF through the American National Standards Institute (ANSI) and International Organization for Standardization (ISO) standards-making processes. Oracle played a key role in developing the CIF. The CIF report format and metrics are consistent with the ISO 9241-11 definition of usability: “The extent to which a product can be used by specified users to achieve specified goals with effectiveness, efficiency and satisfaction in a specified context of use.” Our goal in conducting CIF tests is to measure performance and satisfaction of a representative sample of users on a set of core tasks and to help predict how usable a product will be with the larger population of customers. Why Do We Perform CIF Testing? The overarching purpose of the CIF for usability test reports is to promote incorporation of usability as part of the procurement decision-making process for interactive products. CIF provides a common format for vendors to report the methods and results of usability tests to customer organizations, and enables customers to compare the usability of our software to that of other suppliers. CIF also enables us to compare our current software with previous versions of our software. CIF Testing for Fusion Applications Oracle Fusion Applications comprises more than 100 modules in seven different product families. These modules encompass more than 400 task flows and 400 user roles. Due to resource constraints, we cannot perform comprehensive CIF testing across the entire product suite. Therefore, we had to develop meaningful inclusion criteria and work with other stakeholders across the applications development organization to prioritize product areas for testing. Ultimately, we want to test the product areas for which customers might be most interested in seeing CIF data. We also want to build credibility with customers; we need to be able to make the case to current and prospective customers that the product areas tested are representative of the product suite as a whole. Our goal is to test the top use cases for each product. The primary activity in the scoping process was to work with the individual product teams to identify the key products and business process task flows in each product to test. We prioritized these products and flows through a series of negotiations among the user experience managers, product strategy, and product management directors for each of the primary product families within the Oracle Fusion Applications suite (Human Capital Management, Supply Chain Management, Customer Relationship Management, Financials, Projects, and Procurement). The end result of the scoping exercise was a list of 47 proposed CIF tests for the Fusion Applications product suite.  Figure 1. A participant completes tasks during a usability test in Oracle’s Usability Labs Fusion Supplier Portal CIF Test The first Fusion CIF test was completed on the Supplier Portal application in July of 2011.  Fusion Supplier Portal is part of an integrated suite of Procurement applications that helps supplier companies manage orders, schedules, shipments, invoices, negotiations and payments. The user roles targeted for the usability study were Supplier Account Receivables Specialists and Supplier Sales Representatives, including both experienced and inexperienced users across a wide demographic range.  The test specifically focused on the following functionality and features: Manage payments – view payments Manage invoices – view invoice status and create invoices Manage account information – create new contact, review bank account information Manage agreements – find and view agreement, upload agreement lines, confirm status of agreement lines upload Manage purchase orders (PO) – view history of PO, request change to PO, find orders Manage negotiations – respond to request for a quote, check the status of a negotiation response These product areas were selected to represent the most important subset of features and functionality of the flow, in terms of frequency and criticality of use by customers. A total of 20 users participated in the usability study. The results of the Supplier Portal evaluation were favorable and exceeded our expectations. Figure 2. Fusion Supplier Portal Next Studies We plan to conduct two Fusion CIF usability studies per product family over the next nine months. The next product to be tested will be Self-service Procurement. End users are currently being recruited to participate in this usability study, and the test sessions are scheduled to begin during the last week of November.

  Read the article

• SQL SERVER – Powershell – Importing CSV File Into Database – Video

  - by pinaldave

  Laerte Junior is my very dear friend and Powershell Expert. On my request he has agreed to share Powershell knowledge with us. Laerte Junior is a SQL Server MVP and, through his technology blog and simple-talk articles, an active member of the Microsoft community in Brasil. He is a skilled Principal Database Architect, Developer, and Administrator, specializing in SQL Server and Powershell Programming with over 8 years of hands-on experience. He holds a degree in Computer Science, has been awarded a number of certifications (including MCDBA), and is an expert in SQL Server 2000 / SQL Server 2005 / SQL Server 2008 technologies. Let us read the blog post in his own words. I was reading an excellent post from my great friend Pinal about loading data from CSV files, SQL SERVER – Importing CSV File Into Database – SQL in Sixty Seconds #018 – Video,   to SQL Server and was honored to write another guest post on SQL Authority about the magic of the PowerShell. The biggest stuff in TechEd NA this year was PowerShell. Fellows, if you still don’t know about it, it is better to run. Remember that The Core Servers to SQL Server are the future and consequently the Shell. You don’t want to be out of this, right? Let’s see some PowerShell Magic now. To start our tour, first we need to download these two functions from Powershell and SQL Server Master Jedi Chad Miller.Out-DataTable and Write-DataTable. Save it in a module and add it in your profile. In my case, the module is called functions.psm1. To have some data to play, I created 10 csv files with the same content. I just put the SQL Server Errorlog into a csv file and created 10 copies of it. #Just create a CSV with data to Import. Using SQLErrorLog [reflection.assembly]::LoadWithPartialName(“Microsoft.SqlServer.Smo”) $ServerInstance=new-object (“Microsoft.SqlServer.Management.Smo.Server“) $Env:Computername $ServerInstance.ReadErrorLog() | export-csv-path“c:\SQLAuthority\ErrorLog.csv”-NoTypeInformation for($Count=1;$Count-le 10;$count++)  {       Copy-Item“c:\SQLAuthority\Errorlog.csv”“c:\SQLAuthority\ErrorLog$($count).csv” } Now in my path c:\sqlauthority, I have 10 csv files : Now it is time to create a table. In my case, the SQL Server is called R2D2 and the Database is SQLServerRepository and the table is CSV_SQLAuthority. CREATE TABLE [dbo].[CSV_SQLAuthority]( [LogDate] [datetime] NULL, [Processinfo] [varchar](20) NULL, [Text] [varchar](MAX) NULL ) Let’s play a little bit. I want to import synchronously all csv files from the path to the table: #Importing synchronously $DataImport=Import-Csv-Path ( Get-ChildItem“c:\SQLAuthority\*.csv”) $DataTable=Out-DataTable-InputObject$DataImport Write-DataTable-ServerInstanceR2D2-DatabaseSQLServerRepository-TableNameCSV_SQLAuthority-Data$DataTable Very cool, right? Let’s do it asynchronously and in background using PowerShell  Jobs: #If you want to do it to all asynchronously Start-job-Name‘ImportingAsynchronously‘ ` -InitializationScript  {IpmoFunctions-Force-DisableNameChecking} ` -ScriptBlock {    ` $DataImport=Import-Csv-Path ( Get-ChildItem“c:\SQLAuthority\*.csv”) $DataTable=Out-DataTable-InputObject$DataImport Write-DataTable   -ServerInstance“R2D2″`                   -Database“SQLServerRepository“`                   -TableName“CSV_SQLAuthority“`                   -Data$DataTable             } Oh, but if I have csv files that are large in size and I want to import each one asynchronously. In this case, this is what should be done: Get-ChildItem“c:\SQLAuthority\*.csv” | % { Start-job-Name“$($_)” ` -InitializationScript  {IpmoFunctions-Force-DisableNameChecking} ` -ScriptBlock { $DataImport=Import-Csv-Path$args[0]                $DataTable=Out-DataTable-InputObject$DataImport                Write-DataTable-ServerInstance“R2D2″`                               -Database“SQLServerRepository“`                               -TableName“CSV_SQLAuthority“`                               -Data$DataTable             } -ArgumentList$_.fullname } How cool is that? Let’s make the funny stuff now. Let’s schedule it on an SQL Server Agent Job. If you are using SQL Server 2012, you can use the PowerShell Job Step. Otherwise you need to use a CMDexec job step calling PowerShell.exe. We will use the second option. First, create a ps1 file called ImportCSV.ps1 with the script above and save it in a path. In my case, it is in c:\temp\automation. Just add the line at the end: Get-ChildItem“c:\SQLAuthority\*.csv” | % { Start-job-Name“$($_)” ` -InitializationScript  {IpmoFunctions-Force-DisableNameChecking} ` -ScriptBlock { $DataImport=Import-Csv-Path$args[0]                $DataTable=Out-DataTable-InputObject$DataImport                Write-DataTable-ServerInstance“R2D2″`                               -Database“SQLServerRepository“`                               -TableName“CSV_SQLAuthority“`                               -Data$DataTable             } -ArgumentList$_.fullname } Get-Job | Wait-Job | Out-Null Remove-Job -State Completed Why? See my post Dooh PowerShell Trick–Running Scripts That has Posh Jobs on a SQL Agent Job Remember, this trick is for  ALL scripts that will use PowerShell Jobs and any kind of schedule tool (SQL Server agent, Windows Schedule) Create a Job Called ImportCSV and a step called Step_ImportCSV and choose CMDexec. Then you just need to schedule or run it. I did a short video (with matching good background music) and you can see it at: That’s it guys. C’mon, join me in the #PowerShellLifeStyle. You will love it. If you want to check what we can do with PowerShell and SQL Server, don’t miss Laerte Junior LiveMeeting on July 18. You can have more information in : LiveMeeting VC PowerShell PASS–Troubleshooting SQL Server With PowerShell–English Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology, Video Tagged: Powershell

  Read the article

• SQL SERVER – Parsing SSIS Catalog Messages – Notes from the Field #030

  - by Pinal Dave

  [Note from Pinal]: This is a new episode of Notes from the Field series. SQL Server Integration Service (SSIS) is one of the most key essential part of the entire Business Intelligence (BI) story. It is a platform for data integration and workflow applications. The tool may also be used to automate maintenance of SQL Server databases and updates to multidimensional cube data. In this episode of the Notes from the Field series I requested SSIS Expert Andy Leonard to discuss one of the most interesting concepts of SSIS Catalog Messages. There are plenty of interesting and useful information captured in the SSIS catalog and we will learn together how to explore the same. The SSIS Catalog captures a lot of cool information by default. Here’s a query I use to parse messages from the catalog.operation_messages table in the SSISDB database, where the logged messages are stored. This query is set up to parse a default message transmitted by the Lookup Transformation. It’s one of my favorite messages in the SSIS log because it gives me excellent information when I’m tuning SSIS data flows. The message reads similar to: Data Flow Task:Information: The Lookup processed 4485 rows in the cache. The processing time was 0.015 seconds. The cache used 1376895 bytes of memory. The query: USE SSISDB GO DECLARE @MessageSourceType INT = 60 DECLARE @StartOfIDString VARCHAR(100) = 'The Lookup processed ' DECLARE @ProcessingTimeString VARCHAR(100) = 'The processing time was ' DECLARE @CacheUsedString VARCHAR(100) = 'The cache used ' DECLARE @StartOfIDSearchString VARCHAR(100) = '%' + @StartOfIDString + '%' DECLARE @ProcessingTimeSearchString VARCHAR(100) = '%' + @ProcessingTimeString + '%' DECLARE @CacheUsedSearchString VARCHAR(100) = '%' + @CacheUsedString + '%' SELECT operation_id , SUBSTRING(MESSAGE, (PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1)) - (PATINDEX(@StartOfIDSearchString, MESSAGE) + LEN(@StartOfIDString) + 1))) AS LookupRowsCount , SUBSTRING(MESSAGE, (PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1)) - (PATINDEX(@ProcessingTimeSearchString, MESSAGE) + LEN(@ProcessingTimeString) + 1))) AS LookupProcessingTime , CASE WHEN (CONVERT(numeric(3,3),SUBSTRING(MESSAGE, (PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1)) - (PATINDEX(@ProcessingTimeSearchString, MESSAGE) + LEN(@ProcessingTimeString) + 1))))) = 0 THEN 0 ELSE CONVERT(bigint,SUBSTRING(MESSAGE, (PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1)) - (PATINDEX(@StartOfIDSearchString, MESSAGE) + LEN(@StartOfIDString) + 1)))) / CONVERT(numeric(3,3),SUBSTRING(MESSAGE, (PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1)) - (PATINDEX(@ProcessingTimeSearchString, MESSAGE) + LEN(@ProcessingTimeString) + 1)))) END AS LookupRowsPerSecond , SUBSTRING(MESSAGE, (PATINDEX(@CacheUsedSearchString,MESSAGE) + LEN(@CacheUsedString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@CacheUsedSearchString,MESSAGE) + LEN(@CacheUsedString) + 1)) - (PATINDEX(@CacheUsedSearchString, MESSAGE) + LEN(@CacheUsedString) + 1))) AS LookupBytesUsed ,CASE WHEN (CONVERT(bigint,SUBSTRING(MESSAGE, (PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1)) - (PATINDEX(@StartOfIDSearchString, MESSAGE) + LEN(@StartOfIDString) + 1)))))= 0 THEN 0 ELSE CONVERT(bigint,SUBSTRING(MESSAGE, (PATINDEX(@CacheUsedSearchString,MESSAGE) + LEN(@CacheUsedString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@CacheUsedSearchString,MESSAGE) + LEN(@CacheUsedString) + 1)) - (PATINDEX(@CacheUsedSearchString, MESSAGE) + LEN(@CacheUsedString) + 1)))) / CONVERT(bigint,SUBSTRING(MESSAGE, (PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1)) - (PATINDEX(@StartOfIDSearchString, MESSAGE) + LEN(@StartOfIDString) + 1)))) END AS LookupBytesPerRow FROM [catalog].[operation_messages] WHERE message_source_type = @MessageSourceType AND MESSAGE LIKE @StartOfIDSearchString GO Note that you have to set some parameter values: @MessageSourceType [int] – represents the message source type value from the following results: Value     Description 10           Entry APIs, such as T-SQL and CLR Stored procedures 20           External process used to run package (ISServerExec.exe) 30           Package-level objects 40           Control Flow tasks 50           Control Flow containers 60           Data Flow task 70           Custom execution message Note: Taken from Reza Rad’s (excellent!) helper.MessageSourceType table found here. @StartOfIDString [VarChar(100)] – use this to uniquely identify the message field value you wish to parse. In this case, the string ‘The Lookup processed ‘ identifies all the Lookup Transformation messages I desire to parse. @ProcessingTimeString [VarChar(100)] – this parameter is message-specific. I use this parameter to specifically search the message field value for the beginning of the Lookup Processing Time value. For this execution, I use the string ‘The processing time was ‘. @CacheUsedString [VarChar(100)] – this parameter is also message-specific. I use this parameter to specifically search the message field value for the beginning of the Lookup Cache  Used value. It returns the memory used, in bytes. For this execution, I use the string ‘The cache used ‘. The other parameters are built from variations of the parameters listed above. The query parses the values into text. The string values are converted to numeric values for ratio calculations; LookupRowsPerSecond and LookupBytesPerRow. Since ratios involve division, CASE statements check for denominators that equal 0. Here are the results in an SSMS grid: This is not the only way to retrieve this information. And much of the code lends itself to conversion to functions. If there is interest, I will share the functions in an upcoming post. If you want to get started with SSIS with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SSIS

  Read the article

• Spotlight on Claims: Serving Customers Under Extreme Conditions

  - by [email protected]

  Oracle Insurance's director of marketing for EMEA, John Sinclair, recently attended the CII Spotlight on Claims event in London. Bad weather and its implications for the insurance industry have become very topical as the frequency and diversity of natural disasters - including rains, wind and snow - has surged across Europe this winter. On England's wettest day on record, the county of Cumbria was flooded with 12 inches of rain within 24 hours. Freezing temperatures wreaked havoc on European travel, causing high speed TVG trains to break down and stranding hundreds of passengers under the English Chanel in a tunnel all night long without heat or electricity. A storm named Xynthia thrashed France and surrounding countries with hurricane force, flooding ports and killing 51 people. After the Spring Equinox, insurers may have thought the worst had past. Then came along Eyjafjallajökull, spewing out vast quantities of volcanic ash in what is turning out to be one of most costly natural disasters in history. Such extreme events challenge insurance companies' ability to service their customers just when customers need their help most. When you add economic downturn and competitive pressures to the mix, insurers are further stretched and required to continually learn and innovate to meet high customer expectations with reduced budgets. These and other issues were hot topics of discussion at the recent "Spotlight on Claims" seminar in London, focused on how weather is affecting claims and the insurance industry. The event was organized by the CII (Chartered Insurance Institute), a group with 90,000 members. CII has been at the forefront in setting professional standards for the insurance industry for over a century. Insurers came to the conference to hear how they could better serve their customers under extreme weather conditions, learn from the experience of their peers, and hear about technological breakthroughs in climate modeling, geographic intelligence and IT. Customer case studies at the conference highlighted the importance of effective and constant communication in handling the overflow of catastrophe related claims. First and foremost is the need to rapidly establish initial communication with claimants to build their confidence in a positive outcome. Ongoing communication then needs to be continued throughout the claims cycle to mange expectations and maintain ownership of the process from start to finish. Strong internal communication to support frontline staff was also deemed critical to successful crisis management, as was communication with the broader insurance ecosystem to tap into extended resources and business intelligence. Advances in technology - such web based systems to access policies and enter first notice of loss in the field - as well as customer-focused self-service portals and multichannel alerts, are instrumental in improving customer satisfaction and helping insurers to deal with the claims surge, which often can reach four or more times normal workloads. Dynamic models of the global climate system can now be used to better understand weather-related risks, and as these models mature it is hoped that they will soon become more accurate in predicting the timing of catastrophic events. Geographic intelligence is also being used within a claims environment to better assess loss reserves and detect fraud. Despite these advances in dealing with catastrophes and predicting their occurrence, there will never be a substitute for qualified front line staff to deal with customers. In light of pressures to streamline efficiency, there was debate as to whether outsourcing was the solution, or whether it was better to build on the people you have. In the final analysis, nearly everybody agreed that in the future insurance companies would have to work better and smarter to keep on top. An appeal was also made for greater collaboration amongst industry participants in dealing with the extreme conditions and systematic stress brought on by natural disasters. It was pointed out that the public oftentimes judged the industry as a whole rather than the individual carriers when it comes to freakish events, and that all would benefit at such times from the pooling of limited resources and professional skills rather than competing in silos for competitive advantage - especially the end customer. One case study that stood out was on how The Motorists Insurance Group was able to power through one of the most devastating catastrophes in recent years - Hurricane Ike. The keys to Motorists' success were superior people, processes and technology. They did a lot of upfront planning and invested in their people, creating a healthy team environment that delivered "max service" even when they were experiencing the same level of devastation as the rest of the population. Processes were rapidly adapted to meet the challenge of the catastrophe and continually adapted to Ike's specific conditions as they evolved. Technology was fundamental to the execution of their strategy, enabling them anywhere access, on the fly reassigning of resources and rapid training to augment the work force. You can learn more about the Motorists experience by watching this video. John Sinclair is marketing director for Oracle Insurance in EMEA. He has more than 20 years of experience in insurance and financial services.

  Read the article

• CLR via C# 3rd Edition is out

  - by Abhijeet Patel

  Time for some book news update. CLR via C#, 3rd Edition seems to have been out for a little while now. The book was released in early Feb this year, and needless to say my copy is on it’s way. I can barely wait to dig in and chew on the goodies that one of the best technical authors and software professionals I respect has in store. The 2nd edition of the book was an absolute treat and this edition promises to be no less. Here is a brief description of what’s new and updated from the 2nd edition. Part I – CLR Basics Chapter 1-The CLR’s Execution Model Added about discussion about C#’s /optimize and /debug switches and how they relate to each other. Chapter 2-Building, Packaging, Deploying, and Administering Applications and Types Improved discussion about Win32 manifest information and version resource information. Chapter 3-Shared Assemblies and Strongly Named Assemblies Added discussion of TypeForwardedToAttribute and TypeForwardedFromAttribute. Part II – Designing Types Chapter 4-Type Fundamentals No new topics. Chapter 5-Primitive, Reference, and Value Types Enhanced discussion of checked and unchecked code and added discussion of new BigInteger type. Also added discussion of C# 4.0’s dynamic primitive type. Chapter 6-Type and Member Basics No new topics. Chapter 7-Constants and Fields No new topics. Chapter 8-Methods Added discussion of extension methods and partial methods. Chapter 9-Parameters Added discussion of optional/named parameters and implicitly-typed local variables. Chapter 10-Properties Added discussion of automatically-implemented properties, properties and the Visual Studio debugger, object and collection initializers, anonymous types, the System.Tuple type and the ExpandoObject type. Chapter 11-Events Added discussion of events and thread-safety as well as showing a cool extension method to simplify the raising of an event. Chapter 12-Generics Added discussion of delegate and interface generic type argument variance. Chapter 13-Interfaces No new topics. Part III – Essential Types Chapter 14-Chars, Strings, and Working with Text No new topics. Chapter 15-Enums Added coverage of new Enum and Type methods to access enumerated type instances. Chapter 16-Arrays Added new section on initializing array elements. Chapter 17-Delegates Added discussion of using generic delegates to avoid defining new delegate types. Also added discussion of lambda expressions. Chapter 18-Attributes No new topics. Chapter 19-Nullable Value Types Added discussion on performance. Part IV – CLR Facilities Chapter 20-Exception Handling and State Management This chapter has been completely rewritten. It is now about exception handling and state management. It includes discussions of code contracts and constrained execution regions (CERs). It also includes a new section on trade-offs between writing productive code and reliable code. Chapter 21-Automatic Memory Management Added discussion of C#’s fixed state and how it works to pin objects in the heap. Rewrote the code for weak delegates so you can use them with any class that exposes an event (the class doesn’t have to support weak delegates itself). Added discussion on the new ConditionalWeakTable class, GC Collection modes, Full GC notifications, garbage collection modes and latency modes. I also include a new sample showing how your application can receive notifications whenever Generation 0 or 2 collections occur. Chapter 22-CLR Hosting and AppDomains Added discussion of side-by-side support allowing multiple CLRs to be loaded in a single process. Added section on the performance of using MarshalByRefObject-derived types. Substantially rewrote the section on cross-AppDomain communication. Added section on AppDomain Monitoring and first chance exception notifications. Updated the section on the AppDomainManager class. Chapter 23-Assembly Loading and Reflection Added section on how to deploy a single file with dependent assemblies embedded inside it. Added section comparing reflection invoke vs bind/invoke vs bind/create delegate/invoke vs C#’s dynamic type. Chapter 24-Runtime Serialization This is a whole new chapter that was not in the 2nd Edition. Part V – Threading Chapter 25-Threading Basics Whole new chapter motivating why Windows supports threads, thread overhead, CPU trends, NUMA Architectures, the relationship between CLR threads and Windows threads, the Thread class, reasons to use threads, thread scheduling and priorities, foreground thread vs background threads. Chapter 26-Performing Compute-Bound Asynchronous Operations Whole new chapter explaining the CLR’s thread pool. This chapter covers all the new .NET 4.0 constructs including cooperative cancelation, Tasks, the aralle class, parallel language integrated query, timers, how the thread pool manages its threads, cache lines and false sharing. Chapter 27-Performing I/O-Bound Asynchronous Operations Whole new chapter explaining how Windows performs synchronous and asynchronous I/O operations. Then, I go into the CLR’s Asynchronous Programming Model, my AsyncEnumerator class, the APM and exceptions, Applications and their threading models, implementing a service asynchronously, the APM and Compute-bound operations, APM considerations, I/O request priorities, converting the APM to a Task, the event-based Asynchronous Pattern, programming model soup. Chapter 28-Primitive Thread Synchronization Constructs Whole new chapter discusses class libraries and thread safety, primitive user-mode, kernel-mode constructs, and data alignment. Chapter 29-Hybrid Thread Synchronization Constructs Whole new chapter discussion various hybrid constructs such as ManualResetEventSlim, SemaphoreSlim, CountdownEvent, Barrier, ReaderWriterLock(Slim), OneManyResourceLock, Monitor, 3 ways to solve the double-check locking technique, .NET 4.0’s Lazy and LazyInitializer classes, the condition variable pattern, .NET 4.0’s concurrent collection classes, the ReaderWriterGate and SyncGate classes.

  Read the article

• 2012 Oracle Fusion Innovation Awards - Part 2

  - by Michelle Kimihira

  Author: Moazzam Chaudry Continuing from Friday's blog on 2012 Oracle Fusion Innovation Awards, this blog (Part 2) will provide more details around the customers. It was a tremendous honor to be in single room of winners. We only wish we could have had more time to share stories from all the winners.  We received great insight from all the innovative solutions that our customers deploy and would like to share them broadly, so that others can benefit from best practices. There was a customer panel session joined by Ingersoll Rand, Nike and Motability and here is what was discussed: Barry Bonar, Enterprise Architect from Ingersoll Rand shared details around their solution, comprised of Oracle Exalogic, Oracle WebLogic Server and Oracle SOA Suite. This combined solutoin enabled their business transformation to increase decision-making, speed and efficiency, resulting in 40% reduced IT spend, 41X Faster response time and huge cost savings. Ashok Balakrishnan, Architect from Nike shared how they leveraged Oracle Coherence to analyze their digital "footprint" of activities. This helps them compete, collaborate and compare athletic data over time. Lastly, Ashley Doodly, Head of IT from Motability shared details around their solution compromised of Oracle SOA Suite, Service Bus, ADF, Coherence, BO and E-Business Suite. This solution helped Motability achieve 100% ROI within the first few months, performance in seconds vs. 10's of minutes and tremendous improvement in throughput that increased up to 50%.  This year's winners by category are: Oracle Exalogic Customer Results using Fusion Middleware Netshoes ATG on Exalogic: 6X Reduced H/W foot print, 6.2X increased throughput and 3 weeks time to market Claro Part of America Movil, running mission critical Java Application on Exalogic with 35X Faster Java response time, 5X Throughput Underwriters Laboratories Exalogic as an Apps Consolidation platform to power tremendous growth Ingersoll Rand EBS on Exalogic: Up to 40% Reduction in overall IT budget, 3x reduced foot print Oracle Cloud Application Foundation Customer Results using Fusion Middleware  Mazda Motor Corporation Tuxedo ART Batch runtime environment to migrate their batch apps on new open environment and reduce main frame cost. HOTELBEDS Technology Open Source to WebLogic transformation Globalia Corporation Introduced Oracle Coherence to fully reengineer DTH system and provide multiple business and technical benefits Nike Nike+, digital sports platform, has 8M users and is expecting an 5X increase in users, many of who will carry multiple devices that frequently sync data with the Digital Sport platform Comcast Corporation The solution is expected to increase availability, continuity, performance, and simplify and make the code at the application layer more flexible. Oracle SOA and Oracle BPM Customer Results using Fusion Middleware NTT Docomo Network traffic solution based on Oracle event processing and coherence - massive in scale: 12M users (50M in future) - 800,000 events/sec. Schneider National, Inc. SOA/B2B/ADF/Data Integration to orchestrate key order processes across Siebel, OTM & EBS.  Platform runs 60M trans/day and  50 million composite SOA instances per day across 10G and 11G Amadeus Oracle BPM solution: Business Rules and processes vary across local (80), regional (~10) and corporate approval process. Up to 10 levels of approval. Plans to deploy across 20+ markets Navitar SOA solution integrates a fully non-Oracle legacy application/ERP environment using Oracle’s SOA Suite and Oracle AIA Foundation Pack. Motability Uses SOA Suite to synchronize data across the systems and to manage the vehicle remarketing process Oracle WebCenter Customer Results using Fusion Middleware  News Limited Single platform running websites for 50% of Australia's newspapers University of Louisville “Facebook for Medicine”: Oracle Webcenter platform and Oracle BIEE to analyze patient test data and uncover potential health issues. Expecting annualized ROI of 277% China Mobile Jiangsu Company portal (25k users) to drive collaboration & productivity Life Technologies Portal for remotely monitoring & repairing biotech instruments LA Dept. of Water & Power Oracle WebCenter Portal to power ladwp.com on desktop and mobile for 1.6million users Oracle Identity Management Customer Results using Fusion Middleware Education Testing Service Identity Management platform for provisioning & SSO of 6 million GRE, GMAT, TOEFL customers Avea Oracle Identity Manager allowing call center personnel to quickly change Identity Profile to handle varying call loads based on a user self service interface. Decreased Admin Cost by 30% Oracle Data Integration Customer Results using Fusion Middleware Raymond James Near real-time integration for improved systems (throughput & performance) and enhanced operational flexibility in a 24 X 7 environment Wm Morrison Supermarkets Electronic Point of Sale integration handling over 80 million transactions a day in near real time (15 min intervals) Oracle Application Development Framework and Oracle Fusion Development Customer Results using Fusion Middleware Qualcomm Incorporated Solution providing  immediate business value enabling a self-service model necessary for growing the new customer base, an increase in customer satisfaction, reduced “time-to-deliver” Micros Systems, Inc. ADF, SOA Suite, WebCenter  enables services that include managing distribution of hotel rooms availability and rates to channels such as Hotel Web-site, Expedia, etc. Marfin Egnatia Bank A new web 2.0 UI provides a much richer experience through the ADF solution with the end result being one of boosting end-user productivity    Business Analytics (Oracle BI, Oracle EPM, Oracle Exalytics) Customer Results using Fusion Middleware INC Research Self-service customer portal delivering 5–10% of the overall revenue - expected to grow fast with the BI solution Experian Reduction in Time to Complete the Financial Close Process Hologic Inc Solution, saving months of decision-making uncertainty! We look forward to seeing many more innovative nominations. The nominatation process for 2013 begins in April 2013.    Additional Information: Blog: Oracle WebCenter Award Winners Blog: Oracle Identity Management Winners Blog: Oracle Exalogic Winners Blog: SOA, BPM and Data Integration will be will feature award winners in its respective areas this week Subscribe to our regular Fusion Middleware Newsletter Follow us on Twitter and Facebook

  Read the article

• Invalid Opcode 0000

  - by Mr47

  At random times (usually when watching a movie in XBMC), the computer locks up. I can still sometimes SSH in and get the 'dmesg' output before that locks up too. A hard reboot is usually required to get things going again. I have cut out the date/time/server columns for easier reading, please do ask if these seem relevant omissions... System: Ubuntu 11.04 (2.6.38-8-server) x64 X11 installed with IceWm (and XBMC) Core 2 Duo E8400 @ 3.00GHz 8 GB RAM Asus P5Q premium motherboard Primary harddrive: OCZ Vertex 2 60 GB (SSD) Other harddrives: various 750GB, 1TB, 1.5TB & 2TB (WD & samsung) Any important information I am not supplying is purely a sign of my incompetence in these matters, so please do ask and excuse me for my inabilities... invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map CPU 0 Modules linked in: parport_pc ppdev vesafb snd_hda_codec_analog tuner_simple tuner_types wm8775 tda9887 tda8290 tea5767 tuner cx25840 ir_lirc_codec lirc_dev snd_hda_intel snd_hda_codec snd_hwdep snd_pcm ir_sony_decoder snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq rc_rc6_mce ivtv ir_jvc_decoder cx2341x i2c_algo_bit v4l2_common mceusb videodev ir_rc6_decoder ir_rc5_decoder snd_timer ir_nec_decoder nvidia(P) btusb bluetooth rc_core v4l2_compat_ioctl32 tveeprom snd_seq_device pata_marvell psmouse shpchp serio_raw snd asus_atk0110 soundcore snd_page_alloc lp parport firewire_ohci firewire_core crc_itu_t r8169 sky2 ahci libahci Pid: 4597, comm: xbmc.bin Tainted: P 2.6.38-8-server #42-Ubuntu System manufacturer P5Q Premium/P5Q Premium RIP: 0010:[<ffffffff8119bc4a>] [<ffffffff8119bc4a>] do_mpage_readpage+0x9a/0x510 RSP: 0018:ffff88021f5a59d8 EFLAGS: 00210246 RAX: 0000000000000020 RBX: ffff88021f5a5ac8 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000015e36fe0 RDI: 0000000000000000 RBP: ffff88021f5a5a98 R08: ffff88021f5a5ac8 R09: ffff88021f5a5b38 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 000000000000b148 R14: 0000000000000001 R15: ffff8802067034b8 FS: 00007f3f34eb1700(0000) GS:ffff8800cfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb8d515000 CR3: 000000021d744000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process xbmc.bin (pid: 4597, threadinfo ffff88021f5a4000, task ffff88021f63db80) Stack: ffff88021f5a5a28 ffffffff8116019d ffff88021f5a5b40 0000002000000003 ffff88021f5a5b38 ffff880206703370 ffffea0006d800f8 0000000000000000 ffffea0006d800f8 0000000c811270b5 ffff88021f5a5a68 ffffffff8110bdba Call Trace: [<ffffffff8116019d>] ? mem_cgroup_cache_charge+0xed/0x130 [<ffffffff8110bdba>] ? add_to_page_cache_locked+0xea/0x160 [<ffffffff8119c232>] mpage_readpages+0x102/0x150 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 [<ffffffff81149475>] ? alloc_pages_current+0xa5/0x110 [<ffffffff8120157d>] ext4_readpages+0x1d/0x20 [<ffffffff81116a9b>] __do_page_cache_readahead+0x14b/0x220 [<ffffffff81116ed1>] ra_submit+0x21/0x30 [<ffffffff81116ff5>] ondemand_readahead+0x115/0x230 [<ffffffff811171a0>] page_cache_async_readahead+0x90/0xc0 [<ffffffff8110b184>] ? file_read_actor+0xd4/0x170 [<ffffffff812de72e>] ? radix_tree_lookup_slot+0xe/0x10 [<ffffffff8110c521>] do_generic_file_read.clone.23+0x271/0x450 [<ffffffff8110d1ba>] generic_file_aio_read+0x1ca/0x240 [<ffffffff8100a82e>] ? __switch_to+0x20e/0x2f0 [<ffffffff81164c82>] do_sync_read+0xd2/0x110 [<ffffffff8108b61c>] ? hrtimer_try_to_cancel+0x4c/0xe0 [<ffffffff81279083>] ? security_file_permission+0x93/0xb0 [<ffffffff81164fa1>] ? rw_verify_area+0x61/0xf0 [<ffffffff81165463>] vfs_read+0xc3/0x180 [<ffffffff81165571>] sys_read+0x51/0x90 [<ffffffff8100bfc2>] system_call_fastpath+0x16/0x1b Code: ff ff 48 c7 85 78 ff ff ff 00 00 00 00 49 d3 ee b9 0c 00 00 00 2b 4d 8c 48 8b b2 c8 00 00 00 ba 01 00 00 00 41 0f af c6 49 d3 e5 <0f> 36 4d 8c 4c 01 e8 d3 e2 4c 8d 44 16 ff 48 8b 53 20 49 d3 f8 RIP [<ffffffff8119bc4a>] do_mpage_readpage+0x9a/0x510 RSP <ffff88021f5a59d8> ---[ end trace ac6cd2f4692205a3 ]--- Please note that the error is ALWAYS occuring at do_mpage_readpage+0x9a/0x510 with the same numbers after it. I've tried to come up with the possible meaning of these, but couldn't get any further. I've also noticed that the top block from the call trace is always the following with the exact same numbers: [<ffffffff8116019d>] ? mem_cgroup_cache_charge+0xed/0x130 [<ffffffff8110bdba>] ? add_to_page_cache_locked+0xea/0x160 [<ffffffff8119c232>] mpage_readpages+0x102/0x150 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 Could this indicate a hard drive issue, a RAM issue or something else entirely?

  Read the article

• Oracle Fusion Applications User Experience Design Patterns: Feeling the Love after Launch

  - by mvaughan

  By Misha Vaughan, Oracle Applications User ExperienceIn the first video by the Oracle Applications User Experience team on the Oracle Partner Network, Vice President Jeremy Ashley said that Oracle is looking to expand the ecosystem of support for Oracle’s applications customers as they begin to assess their investment and adoption of Oracle Fusion Applications. Oracle has made a massive investment to maintain the benefits of the Fusion Applications User Experience. This summer, the Applications User Experience team released the Oracle Fusion Applications user experience design patterns.Design patterns help create consistent experiences across devices.The launch has been very well received:Angelo Santagata, Senior Principal Technologist and Fusion Middleware evangelist for Oracle,  wrote this to the system integrator community: “The web site is the result of many years of Oracle R&D into user interface design for Fusion Applications and features a really cool web app which allows you to visualise the UI components in action.”  Grant Ronald, Director of Product Management, Application Development Framework (ADF) said: “It’s a science I don't understand, but now I don't have to ... Now you can learn from the UX experience of Fusion Applications.”Frank Nimphius, Senior Principal Product Manager, Oracle (ADF) wrote about the launch of the design patterns for the ADF Code Corner, and Jürgen Kress, Senior Manager EMEA Alliances & Channels for Fusion MiddleWare and Service Oriented Architecture, (SOA), shared the news with his Partner Community. Oracle Twitter followers also helped spread the message about the design patterns launch: ?@bex – Brian Huff, founder and Chief Software Architect for Bezzotech, and Oracle ACE Director:“Nifty! The Oracle Fusion UX team just released new ADF design patterns.”@maiko_rocha, Maiko Rocha, Oracle Consulting Solutions Architect and Oracle FMW engineer: “Haven't seen any other vendor offer such comprehensive UX Design Patterns catalog for free!”@zirous_chad, Chad Thompson, Senior Solutions Architect for Zirous, Inc. and ADF Developer:Wow - @ultan and company did a great job with the Fusion UX PatternsWhat is a user experience design pattern?A user experience design pattern is a re-usable, usability tested functional blueprint for a particular user experience.  Some examples are guided processes, shopping carts, and search and search results.  Ultan O’Broin discusses the top design patterns every developer should know.The patterns that were just released are based on thousands of hours of end-user field studies, state-of-the-art user interface assessments, and usability testing.  To be clear, these are functional design patterns, not technical design patterns that developers may be used to working with.  Because we know there is a gap, we are putting together some training that will help close that gap.Who should care?This is an offering targeted primarily at Application Development Framework (ADF) developers. If you are faced with the following questions regarding Fusion Applications, you will want to know and learn more:•    How do I build something that looks like Fusion Applications?•    How do I build a next-generation application?•    How do I extend a Fusion Application and maintain the user experience?•    I don’t want to re-invent the wheel on the user interface, so where do I start?•    I need to build something that will eventually co-exist with Fusion Applications. How do I do that?These questions are relevant to partners with an ADF competency, individual practitioners, or small consultancies with an ADF specialization, and customers who are trying to shift their IT staff over to supporting Fusion Applications.Where you can find out more?OnlineOur Fusion User Experience design patterns maven is Ultan O’Broin. The Oracle Partner Network is helping our team bring this first e-seminar to you in order to go into a more detail on what this means and how to take advantage of it:? Webinar: Build a Better User Experience with Oracle: Oracle Fusion Applications Functional Design PatternsSept 20, 2012 , 10:30am-11:30am PacificDial-In:  1. 877-664-9137 / Passcode 102546?International:  706-634-9619  http://www.intercall.com/national/oracleuniversity/gdnam.htmlAccess the Live Event Or Via Webconference Access http://ouweb.webex.com  ?and enter this session number: 598036234At a Usergroup eventThe Fusion User Experience Advocates (FXA) are also going to be getting some deep-dive training on this content and can share it with local user groups.At OpenWorld Ultan O’Broin               Chris MuirIf you will be at OpenWorld this year, our own Ultan O’Broin will be visiting the ADF demopod to say hello, thanks to Shay Shmeltzer, Senior Group Manager for ADF outbound communication and at the OTN lounge: Monday 10-10:45, Tuesday 2:15-2:45, Wednesday 2:15-3:30 ?  Oracle JDeveloper and Oracle ADF,  Moscone South, Right - S-207? “ADF Meet and Greett”, OTN Lounge, Wednesday 4:30 And I cannot talk about OpenWorld and ADF without mentioning Chris Muir’s ADF EMG event: the Year After the Year Of the ADF Developer – Sunday, Sept 30 of OpenWorld. Chris has played host to Ultan and the Applications user experience message for his online community and is now a seasoned UX expert.Expect to see additional announcements about expanded and training on similar topics in the future.

  Read the article

• F# for the C# Programmer

  - by mbcrump

  Are you a C# Programmer and can’t make it past a day without seeing or hearing someone mention F#?  Today, I’m going to walk you through your first F# application and give you a brief introduction to the language. Sit back this will only take about 20 minutes. Introduction Microsoft's F# programming language is a functional language for the .NET framework that was originally developed at Microsoft Research Cambridge by Don Syme. In October 2007, the senior vice president of the developer division at Microsoft announced that F# was being officially productized to become a fully supported .NET language and professional developers were hired to create a team of around ten people to build the product version. In September 2008, Microsoft released the first Community Technology Preview (CTP), an official beta release, of the F# distribution . In December 2008, Microsoft announced that the success of this CTP had encouraged them to escalate F# and it is now will now be shipped as one of the core languages in Visual Studio 2010 , alongside C++, C# 4.0 and VB. The F# programming language incorporates many state-of-the-art features from programming language research and ossifies them in an industrial strength implementation that promises to revolutionize interactive, parallel and concurrent programming. Advantages of F# F# is the world's first language to combine all of the following features: Type inference: types are inferred by the compiler and generic definitions are created automatically. Algebraic data types: a succinct way to represent trees. Pattern matching: a comprehensible and efficient way to dissect data structures. Active patterns: pattern matching over foreign data structures. Interactive sessions: as easy to use as Python and Mathematica. High performance JIT compilation to native code: as fast as C#. Rich data structures: lists and arrays built into the language with syntactic support. Functional programming: first-class functions and tail calls. Expressive static type system: finds bugs during compilation and provides machine-verified documentation. Sequence expressions: interrogate huge data sets efficiently. Asynchronous workflows: syntactic support for monadic style concurrent programming with cancellations. Industrial-strength IDE support: multithreaded debugging, and graphical throwback of inferred types and documentation. Commerce friendly design and a viable commercial market. Lets try a short program in C# then F# to understand the differences. Using C#: Create a variable and output the value to the console window: Sample Program. using System;   namespace ConsoleApplication9 {     class Program     {         static void Main(string[] args)         {             var a = 2;             Console.WriteLine(a);             Console.ReadLine();         }     } } A breeze right? 14 Lines of code. We could have condensed it a bit by removing the “using” statment and tossing the namespace. But this is the typical C# program. Using F#: Create a variable and output the value to the console window: To start, open Visual Studio 2010 or Visual Studio 2008. Note: If using VS2008, then please download the SDK first before getting started. If you are using VS2010 then you are already setup and ready to go. So, click File-> New Project –> Other Languages –> Visual F# –> Windows –> F# Application. You will get the screen below. Go ahead and enter a name and click OK. Now, you will notice that the Solution Explorer contains the following: Double click the Program.fs and enter the following information. Hit F5 and it should run successfully. Sample Program. open System let a = 2        Console.WriteLine a As Shown below: Hmm, what? F# did the same thing in 3 lines of code. Show me the interactive evaluation that I keep hearing about. The F# development environment for Visual Studio 2010 provides two different modes of execution for F# code: Batch compilation to a .NET executable or DLL. (This was accomplished above). Interactive evaluation. (Demo is below) The interactive session provides a > prompt, requires a double semicolon ;; identifier at the end of a code snippet to force evaluation, and returns the names (if any) and types of resulting definitions and values. To access the F# prompt, in VS2010 Goto View –> Other Window then F# Interactive. Once you have the interactive window type in the following expression: 2+3;; as shown in the screenshot below: I hope this guide helps you get started with the language, please check out the following books for further information. F# Books for further reading   Foundations of F# Author: Robert Pickering An introduction to functional programming with F#. Including many samples, this book walks through the features of the F# language and libraries, and covers many of the .NET Framework features which can be leveraged with F#.       Functional Programming for the Real World: With Examples in F# and C# Authors: Tomas Petricek and Jon Skeet An introduction to functional programming for existing C# developers written by Tomas Petricek and Jon Skeet. This book explains the core principles using both C# and F#, shows how to use functional ideas when designing .NET applications and presents practical examples such as design of domain specific language, development of multi-core applications and programming of reactive applications.

  Read the article

• Liskov Substitution Principle and the Oft Forgot Third Wheel

  - by Stacy Vicknair

  Liskov Substitution Principle (LSP) is a principle of object oriented programming that many might be familiar with from the SOLID principles mnemonic from Uncle Bob Martin. The principle highlights the relationship between a type and its subtypes, and, according to Wikipedia, is defined by Barbara Liskov and Jeanette Wing as the following principle:   Let be a property provable about objects of type . Then should be provable for objects of type where is a subtype of .   Rectangles gonna rectangulate The iconic example of this principle is illustrated with the relationship between a rectangle and a square. Let’s say we have a class named Rectangle that had a property to set width and a property to set its height. 1: Public Class Rectangle 2: Overridable Property Width As Integer 3: Overridable Property Height As Integer 4: End Class   We all at some point here that inheritance mocks an “IS A” relationship, and by gosh we all know square IS A rectangle. So let’s make a square class that inherits from rectangle. However, squares do maintain the same length on every side, so let’s override and add that behavior. 1: Public Class Square 2: Inherits Rectangle 3:  4: Private _sideLength As Integer 5:  6: Public Overrides Property Width As Integer 7: Get 8: Return _sideLength 9: End Get 10: Set(value As Integer) 11: _sideLength = value 12: End Set 13: End Property 14:  15: Public Overrides Property Height As Integer 16: Get 17: Return _sideLength 18: End Get 19: Set(value As Integer) 20: _sideLength = value 21: End Set 22: End Property 23: End Class   Now, say we had the following test: 1: Public Sub SetHeight_DoesNotAffectWidth(rectangle As Rectangle) 2: 'arrange 3: Dim expectedWidth = 4 4: rectangle.Width = 4 5:  6: 'act 7: rectangle.Height = 7 8:  9: 'assert 10: Assert.AreEqual(expectedWidth, rectangle.Width) 11: End Sub   If we pass in a rectangle, this test passes just fine. What if we pass in a square?   This is where we see the violation of Liskov’s Principle! A square might "IS A” to a rectangle, but we have differing expectations on how a rectangle should function than how a square should! Great expectations Here’s where we pat ourselves on the back and take a victory lap around the office and tell everyone about how we understand LSP like a boss. And all is good… until we start trying to apply it to our work. If I can’t even change functionality on a simple setter without breaking the expectations on a parent class, what can I do with subtyping? Did Liskov just tell me to never touch subtyping again? The short answer: NO, SHE DIDN’T. When I first learned LSP, and from those I’ve talked with as well, I overlooked a very important but not appropriately stressed quality of the principle: our expectations. Our inclination is to want a logical catch-all, where we can easily apply this principle and wipe our hands, drop the mic and exit stage left. That’s not the case because in every different programming scenario, our expectations of the parent class or type will be different. We have to set reasonable expectations on the behaviors that we expect out of the parent, then make sure that those expectations are met by the child. Any expectations not explicitly expected of the parent aren’t expected of the child either, and don’t register as a violation of LSP that prevents implementation. You can see the flexibility mentioned in the Wikipedia article itself: A typical example that violates LSP is a Square class that derives from a Rectangle class, assuming getter and setter methods exist for both width and height. The Square class always assumes that the width is equal with the height. If a Square object is used in a context where a Rectangle is expected, unexpected behavior may occur because the dimensions of a Square cannot (or rather should not) be modified independently. This problem cannot be easily fixed: if we can modify the setter methods in the Square class so that they preserve the Square invariant (i.e., keep the dimensions equal), then these methods will weaken (violate) the postconditions for the Rectangle setters, which state that dimensions can be modified independently. Violations of LSP, like this one, may or may not be a problem in practice, depending on the postconditions or invariants that are actually expected by the code that uses classes violating LSP. Mutability is a key issue here. If Square and Rectangle had only getter methods (i.e., they were immutable objects), then no violation of LSP could occur. What this means is that the above situation with a rectangle and a square can be acceptable if we do not have the expectation for width to leave height unaffected, or vice-versa, in our application. Conclusion – the oft forgot third wheel Liskov Substitution Principle is meant to act as a guidance and warn us against unexpected behaviors. Objects can be stateful and as a result we can end up with unexpected situations if we don’t code carefully. Specifically when subclassing, make sure that the subclass meets the expectations held to its parent. Don’t let LSP think you cannot deviate from the behaviors of the parent, but understand that LSP is meant to highlight the importance of not only the parent and the child class, but also of the expectations WE set for the parent class and the necessity of meeting those expectations in order to help prevent sticky situations.   Code examples, in both VB and C# Technorati Tags: LSV,Liskov Substitution Principle,Uncle Bob,Robert Martin,Barbara Liskov,Liskov

  Read the article

• MySQL server stopped working after upgrade

  - by umpirsky

  I upgraded to 12.04 and my MySQL server just stopped working. It throws: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) I tried to reinstall it from software center, but it fails with: Package operation failed The installation or removal of a software package failed. installArchives() failed: Selecting previously unselected package mysql-server. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 243412 files and directories currently installed.) Unpacking mysql-server (from .../mysql-server_5.5.22-0ubuntu1_all.deb) ... Setting up mysql-server-5.5 (5.5.22-0ubuntu1) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: mysql-server-5.5 mysql-server Error in function: Setting up mysql-server-5.5 (5.5.22-0ubuntu1) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured I also tried: $ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: mysql-server-5.5 mysql-server-core-5.5 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up mysql-server-5.5 (5.5.22-0ubuntu1) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: mysql-server-5.5 E: Sub-process /usr/bin/dpkg returned an error code (1) Any idea? EDIT: Crash report is being auto generated. EDIT: After trying and trying I got suggestion to do: #apt-get --purge remove mysql-server-5.1 mysql-server-5.5 Reading package lists... Done Building dependency tree Reading state information... Done Virtual packages like 'mysql-server-5.1' can't be removed The following packages will be REMOVED: mysql-server-5.5* 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 31.3 MB disk space will be freed. Do you want to continue [Y/n]? Y (Reading database ... 243407 files and directories currently installed.) Removing mysql-server-5.5 ... Purging configuration files for mysql-server-5.5 ... Processing triggers for ureadahead ... Processing triggers for man-db ... The most important part is: Virtual packages like 'mysql-server-5.1' can't be removed Any idea?

  Read the article

• SQL Saturday 43 in Redmond

  - by AjarnMark

  I attended my first SQLSaturday a couple of days ago, SQLSaturday #43 in Redmond (at Microsoft).  I got there really early, primarily because I forgot how fast I can get there from my home when nobody else is on the road.  On a weekday in rush hour traffic, that would have taken two hours to get there.  I gave myself 90 minutes, and actually got there in about 45.  Crazy! I made the mistake of going to the main Microsoft campus, but that’s not where the event was being held.  Instead it was in a big Microsoft conference center on the other side of the highway.  Fortunately, I had the address with me and quickly realized my mistake.  When I got back on track, I noticed that there were bright yellow signs out on the street corner that looked like they said they were for SOL Saturday, which actually was appropriate since it was the sunniest day around here in a long time. Since I was there so early, the registration was just getting setup, so I found Greg Larsen who was coordinating things and offered to help.  He put me to work with a group of people organizing the pre-printed raffle tickets and stuffing swag bags. I had never been to a SQLSaturday before this one, so I wasn’t exactly sure what to expect even though I have read about a few on some blogs.  It makes sense that each one will be a little bit different since they are almost completely volunteer driven, and the whole concept is still in its early stages.  I have been to the PASS Summit for the last several years, and was hoping for a smaller version of that.  Now, it’s not really fair to compare one free day of training run entirely by volunteers with a multi-day, $1,000+ event put on under the direction of a professional event management company.  But there are some parallels. At this SQLSaturday, there was no opening general session, just coffee and pastries in the common area / expo hallway and straight into the first group of sessions.  I don’t know if that was because there was no single room large enough to hold everyone, or for other reasons.  This worked out okay, but the organization guy in me would have preferred to have even a 15 minute welcome message from the organizers with a little overview of the day.  Even something as simple as, “Thanks to persons X, Y, and Z for helping put this together…Sessions will start in 20 minutes and are all in rooms down this hallway…the bathrooms are on the other side of the conference center…lunch today is pizza and we would like to thank sponsor Q for providing it.”  It doesn’t need to be much, certainly not a full-blown Keynote like at the PASS Summit, but something to use as a rallying point to pull everyone together and get the day off to an official start would be nice.  Again, there may have been logistical reasons why that was not feasible here.  I’m just putting out my thoughts for other SQLSaturday coordinators to consider. The event overall was great.  I believe that there were over 300 in attendance, and everything seemed to run smoothly.  At least from an attendee’s point of view where there was plenty of muffins in the morning and pizza in the afternoon, with plenty of pop to drink.  And hey, if you’ve got the food and drink covered, a lot of other stuff could go wrong and people will be very forgiving.  But as I said, everything appeared to run pretty smoothly, at least until Buck Woody showed up in his Oracle shirt.  Other than that, the volunteers did a great job! I was a little surprised by how few people in my own backyard that I know.  It makes sense if you really think about it, given how many companies must be using SQL Server around here.  I guess I just got spoiled coming into the PASS Summit with a few contacts that I already knew would be there.  Perhaps I have been spending too much time with too few people at the Summits and I need to step out and meet more folks.  Of course, it also is different since the Summit is the big national event and a number of the folks I know are spread out across the country, so the Summit is the only time we’re all in the same place at the same time.  I did make a few new contacts at SQLSaturday, and bumped into a couple of people that I knew (and a couple others that I only knew from Twitter, and didn’t even realize that they were here in the area). Other than the sheer entertainment value of Buck Woody’s session, the one that was probably the greatest value for me was a quick introduction to PowerShell.  I have not done anything with it yet, but I think it will be a good tool to use to implement my plans for automated database recovery testing.  I saw just enough at the session to take away some of the intimidation factor, and I am getting ready to jump in and see what I can put together in the next few weeks.  And that right there made the investment worthwhile.  So I encourage you, if you have the opportunity to go to a SQLSaturday event near you, go for it!

  Read the article

• org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'transactionManager

  - by BilalFromParis

  when I add the code into my spring configuration file beans-hibernate.xml <bean id="transactionManager" class="org.springframework.orm.hibernate3.HibernateTransactionManager"> <property name="sessionFactory" ref="sessionFactory" /> </bean> It doesn't work and I don't know why, can someone help me please ? My Dao Class is : public class CourseDaoImpl implements CourseDao { private SessionFactory sessionFactory; public void setSessionFactory(SessionFactory sessionFactory) { this.sessionFactory = sessionFactory; } @Transactional public void store(Course course) { sessionFactory.getCurrentSession().saveOrUpdate(course); } @Transactional public void delete(Long courseId) { Course course = (Course)sessionFactory.getCurrentSession().get(Course.class, courseId); sessionFactory.getCurrentSession().delete(course); } @Transactional(readOnly=true) public Course findById(Long courseId) { return (Course)sessionFactory.getCurrentSession().get(Course.class, courseId); } @Transactional public List<Course> findAll() { Query query = sessionFactory.getCurrentSession().createQuery("FROM Course"); return (List<Course>)query.list(); } } but : juil. 04, 2012 3:38:18 AM org.springframework.context.support.AbstractApplicationContext prepareRefresh Infos: Refreshing org.springframework.context.support.ClassPathXmlApplicationContext@6ba8fb1b: startup date [Wed Jul 04 03:38:18 CEST 2012]; root of context hierarchy juil. 04, 2012 3:38:18 AM org.springframework.beans.factory.xml.XmlBeanDefinitionReader loadBeanDefinitions Infos: Loading XML bean definitions from class path resource [beans-hibernate.xml] juil. 04, 2012 3:38:19 AM org.springframework.beans.factory.support.DefaultListableBeanFactory preInstantiateSingletons Infos: Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@5a7fed46: defining beans [org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,sessionFactory,transactionManager,courseDao]; root of factory hierarchy juil. 04, 2012 3:38:19 AM org.hibernate.annotations.common.Version INFO: HCANN000001: Hibernate Commons Annotations {4.0.1.Final} juil. 04, 2012 3:38:19 AM org.hibernate.Version logVersion INFO: HHH000412: Hibernate Core {4.1.3.Final} juil. 04, 2012 3:38:19 AM org.hibernate.cfg.Environment INFO: HHH000206: hibernate.properties not found juil. 04, 2012 3:38:19 AM org.hibernate.cfg.Environment buildBytecodeProvider INFO: HHH000021: Bytecode provider name : javassist juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000402: Using Hibernate built-in connection pool (not for production use!) juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000115: Hibernate connection pool size: 20 juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000006: Autocommit mode: false juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000401: using driver [org.hibernate.dialect.PostgreSQLDialect] at URL [jdbc:postgresql://localhost:5432/spring] juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl configure INFO: HHH000046: Connection properties: {user=Bilal, password=**} juil. 04, 2012 3:38:19 AM org.hibernate.dialect.Dialect INFO: HHH000400: Using dialect: org.hibernate.dialect.PostgreSQLDialect juil. 04, 2012 3:38:19 AM org.hibernate.engine.jdbc.internal.LobCreatorBuilder useContextualLobCreation INFO: HHH000423: Disabling contextual LOB creation as JDBC driver reported JDBC version [3] less than 4 juil. 04, 2012 3:38:19 AM org.hibernate.engine.transaction.internal.TransactionFactoryInitiator initiateService INFO: HHH000399: Using default transaction strategy (direct JDBC transactions) juil. 04, 2012 3:38:19 AM org.hibernate.hql.internal.ast.ASTQueryTranslatorFactory INFO: HHH000397: Using ASTQueryTranslatorFactory juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.SchemaUpdate execute INFO: HHH000228: Running hbm2ddl schema update juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.SchemaUpdate execute INFO: HHH000102: Fetching database metadata juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.SchemaUpdate execute INFO: HHH000396: Updating schema juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.TableMetadata INFO: HHH000261: Table found: public.course juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.TableMetadata INFO: HHH000037: Columns: [fee, id, title, end_date, begin_date] juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.TableMetadata INFO: HHH000108: Foreign keys: [] juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.TableMetadata INFO: HHH000126: Indexes: [course_pkey] juil. 04, 2012 3:38:19 AM org.hibernate.tool.hbm2ddl.SchemaUpdate execute INFO: HHH000232: Schema update complete juil. 04, 2012 3:38:19 AM org.springframework.beans.factory.support.DefaultSingletonBeanRegistry destroySingletons Infos: Destroying singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@5a7fed46: defining beans [org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,sessionFactory,transactionManager,courseDao]; root of factory hierarchy juil. 04, 2012 3:38:19 AM org.hibernate.service.jdbc.connections.internal.DriverManagerConnectionProviderImpl stop INFO: HHH000030: Cleaning up connection pool [jdbc:postgresql://localhost:5432/spring] Exception in thread "main" org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'transactionManager' defined in class path resource [beans-hibernate.xml]: Invocation of init method failed; nested exception is java.lang.NoClassDefFoundError: org/hibernate/engine/SessionFactoryImplementor at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1455) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:294) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:225) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:291) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:193) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:585) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:913) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:464) at org.springframework.context.support.ClassPathXmlApplicationContext.(ClassPathXmlApplicationContext.java:139) at org.springframework.context.support.ClassPathXmlApplicationContext.(ClassPathXmlApplicationContext.java:83) at com.boutaya.bill.main.Main.main(Main.java:14) Caused by: java.lang.NoClassDefFoundError: org/hibernate/engine/SessionFactoryImplementor at org.springframework.orm.hibernate3.SessionFactoryUtils.getDataSource(SessionFactoryUtils.java:123) at org.springframework.orm.hibernate3.HibernateTransactionManager.afterPropertiesSet(HibernateTransactionManager.java:411) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1514) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1452) ... 12 more Caused by: java.lang.ClassNotFoundException: org.hibernate.engine.SessionFactoryImplementor at java.net.URLClassLoader$1.run(Unknown Source) at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) ... 16 more I think the problem is when I use the Class : org.springframework.orm.hibernate3.HibernateTransactionManager ???

  Read the article

• Stir Trek: Iron Man Edition Recap and Photos

  - by Brian Jackett

  If you’ve noticed my blogging activity has reduced in frequency and technical content lately it’s primarily due to all of the conferences I’ve been attending, speaking at, or planning in the past few months.  This past Friday myself and six other dedicated individuals put on Stir Trek: Iron Man Edition as the culmination of a few months of hard work.  For those unfamiliar, Stir Trek is a web developer conference that was founded last year as an event to showcase content from Microsoft’s MIX conference and end the day with a private showing of the then just-released Star Trek movie.  This year’s conference expanded from 2 to 4 content tracks and upped the number of tickets from 350 to 600.  Even more amazing was the fact that we had 592 people show up day of the event for the lowest drop-off percentage of any conference I’ve been to before.   Nerd Dinner and Swag Bags     The night before Stir Trek: Iron Man Edition we hosted a nerd dinner at the Polaris Shopping mall food court with about 30 in attendance.  Nerd dinners are a great time to meet others passionate about technology and socialize before the whirlwind of the conference hits.  After the nerd dinner 20+ volunteers headed to the conference location and helped us stuff swag bags.  This in and of itself was a monumental task of putting together 600 swag bags with numerous leaflets, sponsor items, and t-shirts.  A big thanks goes out to all who assisted us that night so that we could finish in just under 2 hours instead of taking all night.  My sleep schedule also thanks you. Morning of Stir Trek     After getting a decent amount of sleep I arrived at Marcus Crosswoods theater at 6am to begin setting up for the day.  Myself and Jody Morgan were in charge of registration so we got tables set up, laid out swag bags, and organized our volunteer crew to assist with checking-in attendees.  Despite having 600+ people registration went fairly smoothly and got the day off to a great start.  I especially appreciated the 3+ cups of coffee from Crimson Cup, a local coffee shop.  For any of you that know me you’ll know that I rarely drink coffee except a few times a year when I really need the energy, so that says a lot about how good their coffee is.   Conference Starts     Once registration was completed the day kicked off with Molly Holzschlag keynoting.  Unfortunately Molly suffered from an ear infection and wasn’t able to fly so she had a virtual keynote and a session later in the day.  I was working behind the scenes on various tasks so I was only able to drop in very briefly on the keynote and rest of the morning sessions.  Throughout the day I tried to grab at least 1 or 2 pics of each presenter.  See my album below for the full set of pics.      For lunch we ordered around 150 pizzas from Mellow Mushroom, a local pizza place (notice the theme of supporting local businesses.)  Early on we were concerned about Mellow Mushroom being able to supply that many pizzas and get them delivered (still hot) to the theater, but they did an excellent job day of the event.  I wish I had gotten some pictures of the old school VW van they delivered the pizza in, but I was just a bit busy running around trying to get theaters ready for lunch.  We had attendees from last year who specifically requested that we have Mellow Mushroom supply lunch this year and I’m glad everything worked out being able to use them again.     During the afternoon I was able to attend a few sessions and hear some great content from various speakers.  It was also nice to just sit down and get off my feet for a bit.  After the last sessions the day concluded with a raffle.  There were a few logistical and technical issues that hampered our ability to smoothly conduct the raffle.  To those of you that agree the raffle wasn’t the smoothest experience I would like to say that the Stir Trek planning committee has already begun meeting to discuss ways of improving the conference for next year.  We are also accepting feedback (both positive and negative) at the following link: click here.  If you don’t wish to use the Joind In site you can also email me directly and I’ll be sure to pass along the feedback.   Iron Man 2 Movie     Last but not least, what Stir Trek event would be complete without the feature movie.  This year’s movie was Iron Man 2.  The theater had some really cool props and promotions (see pic below) for the movie.  I really enjoyed Iron Man 2, but I would recommend brushing up on the Iron Man comics and Marvel’s plans for future movies to understand some of the plot elements that come up.  Also make sure you stay through to the end of the movie credits to see a sneak peak of something special, that’s all I’ll say. Conclusion     Again a big thanks goes out to all of the speakers, sponsors, attendees, movie theater staff, volunteers, and everyone else involved in making this event great.  Also big thanks to my fellow Stir Trek planning committee members: Jeff Blankenburg, Matt Casto, Carey Payette, Jody Morgan, Rick Kierner, and Sarah Dutkiewitcz.  I am grateful for everything I learned while helping plan this event and look forward to being involved again next year.  For those interested we are currently targeting Thor as our movie theme for 2011 and then The Avengers for 2012.  These are tentative based on release dates that could shift as we get closer, but for now look solid.   Photos Pics on Facebook (includes tagging)     Stir Trek: Iron Man Edition photos on Facebook Pics on Live site (higher res)      View Full Album         -Frog Out

  Read the article

• Do Not Optimize Without Measuring

  - by Alois Kraus

  Recently I had to do some performance work which included reading a lot of code. It is fascinating with what ideas people come up to solve a problem. Especially when there is no problem. When you look at other peoples code you will not be able to tell if it is well performing or not by reading it. You need to execute it with some sort of tracing or even better under a profiler. The first rule of the performance club is not to think and then to optimize but to measure, think and then optimize. The second rule is to do this do this in a loop to prevent slipping in bad things for too long into your code base. If you skip for some reason the measure step and optimize directly it is like changing the wave function in quantum mechanics. This has no observable effect in our world since it does represent only a probability distribution of all possible values. In quantum mechanics you need to let the wave function collapse to a single value. A collapsed wave function has therefore not many but one distinct value. This is what we physicists call a measurement. If you optimize your application without measuring it you are just changing the probability distribution of your potential performance values. Which performance your application actually has is still unknown. You only know that it will be within a specific range with a certain probability. As usual there are unlikely values within your distribution like a startup time of 20 minutes which should only happen once in 100 000 years. 100 000 years are a very short time when the first customer tries your heavily distributed networking application to run over a slow WIFI network… What is the point of this? Every programmer/architect has a mental performance model in his head. A model has always a set of explicit preconditions and a lot more implicit assumptions baked into it. When the model is good it will help you to think of good designs but it can also be the source of problems. In real world systems not all assumptions of your performance model (implicit or explicit) hold true any longer. The only way to connect your performance model and the real world is to measure it. In the WIFI example the model did assume a low latency high bandwidth LAN connection. If this assumption becomes wrong the system did have a drastic change in startup time. Lets look at a example. Lets assume we want to cache some expensive UI resource like fonts objects. For this undertaking we do create a Cache class with the UI themes we want to support. Since Fonts are expensive objects we do create it on demand the first time the theme is requested. A simple example of a Theme cache might look like this: using System; using System.Collections.Generic; using System.Drawing; struct Theme { public Color Color; public Font Font; } static class ThemeCache { static Dictionary<string, Theme> _Cache = new Dictionary<string, Theme> { {"Default", new Theme { Color = Color.AliceBlue }}, {"Theme12", new Theme { Color = Color.Aqua }}, }; public static Theme Get(string theme) { Theme cached = _Cache[theme]; if (cached.Font == null) { Console.WriteLine("Creating new font"); cached.Font = new Font("Arial", 8); } return cached; } } class Program { static void Main(string[] args) { Theme item = ThemeCache.Get("Theme12"); item = ThemeCache.Get("Theme12"); } } This cache does create font objects only once since on first retrieve of the Theme object the font is added to the Theme object. When we let the application run it should print “Creating new font” only once. Right? Wrong! The vigilant readers have spotted the issue already. The creator of this cache class wanted to get maximum performance. So he decided that the Theme object should be a value type (struct) to not put too much pressure on the garbage collector. The code Theme cached = _Cache[theme]; if (cached.Font == null) { Console.WriteLine("Creating new font"); cached.Font = new Font("Arial", 8); } does work with a copy of the value stored in the dictionary. This means we do mutate a copy of the Theme object and return it to our caller. But the original Theme object in the dictionary will have always null for the Font field! The solution is to change the declaration of struct Theme to class Theme or to update the theme object in the dictionary. Our cache as it is currently is actually a non caching cache. The funny thing was that I found out with a profiler by looking at which objects where finalized. I found way too many font objects to be finalized. After a bit debugging I found the allocation source for Font objects was this cache. Since this cache was there for years it means that the cache was never needed since I found no perf issue due to the creation of font objects. the cache was never profiled if it did bring any performance gain. to make the cache beneficial it needs to be accessed much more often. That was the story of the non caching cache. Next time I will write something something about measuring.

  Read the article

• Super Joybox 5 HID 0925:8884 not recognized as joystick in Ubuntu 12.04 LTS

  - by Tim Evans

  Problem: When using the "Super JoyBox 5" 4 port playstation 2 to USB adapter, the device is not recognized as a joystick. there is no js0 created, but instead another input eventX and mouseX are created in /dev/input. When using the directional buttons (up down left right) on a Playstation 1 controller attached to the device, the mouse cursor moves to the top, bottom, left, and right edges of the screen respectively. Buttons are unresponsive. The joypads attached to the device cannot be used in any games or other programs. Attempted remedies: Creating a symlink from the eventX to js0 does not solve the problem. Addl Info: joydev is loaded and running peroperly according to LSMOD. evtest can be run on the created eventX (sudo evtest /dev/input/event14 in my case) and the buttons and axes all register inputs. Here is a paste of EVTEST's diagnostic and the first couple button events. [code] sudo evtest /dev/input/event14 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x925 product 0x8884 version 0x100 Input device name: "HID 0925:8884" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 288 (BTN_TRIGGER) Event code 289 (BTN_THUMB) Event code 290 (BTN_THUMB2) Event code 291 (BTN_TOP) Event code 292 (BTN_TOP2) Event code 293 (BTN_PINKIE) Event code 294 (BTN_BASE) Event code 295 (BTN_BASE2) Event code 296 (BTN_BASE3) Event code 297 (BTN_BASE4) Event code 298 (BTN_BASE5) Event code 299 (BTN_BASE6) Event code 300 (?) Event code 301 (?) Event code 302 (?) Event code 303 (BTN_DEAD) Event code 304 (BTN_A) Event code 305 (BTN_B) Event code 306 (BTN_C) Event code 307 (BTN_X) Event code 308 (BTN_Y) Event code 309 (BTN_Z) Event code 310 (BTN_TL) Event code 311 (BTN_TR) Event code 312 (BTN_TL2) Event code 313 (BTN_TR2) Event code 314 (BTN_SELECT) Event code 315 (BTN_START) Event code 316 (BTN_MODE) Event code 317 (BTN_THUMBL) Event code 318 (BTN_THUMBR) Event code 319 (?) Event code 320 (BTN_TOOL_PEN) Event code 321 (BTN_TOOL_RUBBER) Event code 322 (BTN_TOOL_BRUSH) Event code 323 (BTN_TOOL_PENCIL) Event code 324 (BTN_TOOL_AIRBRUSH) Event code 325 (BTN_TOOL_FINGER) Event code 326 (BTN_TOOL_MOUSE) Event code 327 (BTN_TOOL_LENS) Event code 328 (?) Event code 329 (?) Event code 330 (BTN_TOUCH) Event code 331 (BTN_STYLUS) Event code 332 (BTN_STYLUS2) Event code 333 (BTN_TOOL_DOUBLETAP) Event code 334 (BTN_TOOL_TRIPLETAP) Event code 335 (BTN_TOOL_QUADTAP) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 127 Min 0 Max 255 Flat 15 Event code 1 (ABS_Y) Value 127 Min 0 Max 255 Flat 15 Event code 2 (ABS_Z) Value 127 Min 0 Max 255 Flat 15 Event code 3 (ABS_RX) Value 127 Min 0 Max 255 Flat 15 Event code 4 (ABS_RY) Value 127 Min 0 Max 255 Flat 15 Event code 5 (ABS_RZ) Value 127 Min 0 Max 255 Flat 15 Event code 6 (ABS_THROTTLE) Value 127 Min 0 Max 255 Flat 15 Event code 7 (ABS_RUDDER) Value 127 Min 0 Max 255 Flat 15 Event code 8 (ABS_WHEEL) Value 127 Min 0 Max 255 Flat 15 Event code 9 (ABS_GAS) Value 127 Min 0 Max 255 Flat 15 Event code 10 (ABS_BRAKE) Value 127 Min 0 Max 255 Flat 15 Event code 11 (?) Value 127 Min 0 Max 255 Flat 15 Event code 12 (?) Value 127 Min 0 Max 255 Flat 15 Event code 13 (?) Value 127 Min 0 Max 255 Flat 15 Event code 14 (?) Value 127 Min 0 Max 255 Flat 15 Event code 15 (?) Value 127 Min 0 Max 255 Flat 15 Event code 16 (ABS_HAT0X) Value 0 Min -1 Max 1 Event code 17 (ABS_HAT0Y) Value 0 Min -1 Max 1 Event code 18 (ABS_HAT1X) Value 0 Min -1 Max 1 Event code 19 (ABS_HAT1Y) Value 0 Min -1 Max 1 Event code 20 (ABS_HAT2X) Value 0 Min -1 Max 1 Event code 21 (ABS_HAT2Y) Value 0 Min -1 Max 1 Event code 22 (ABS_HAT3X) Value 0 Min -1 Max 1 Event code 23 (ABS_HAT3Y) Value 0 Min -1 Max 1 Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Testing ... (interrupt to exit) Event: time 1351223176.126127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223176.126130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 1 Event: time 1351223176.126166, -------------- SYN_REPORT ------------ Event: time 1351223178.238127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223178.238130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 0 Event: time 1351223178.238167, -------------- SYN_REPORT ------------ Event: time 1351223180.422127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223180.422129, type 1 (EV_KEY), code 289 (BTN_THUMB), value 1 Event: time 1351223180.422163, -------------- SYN_REPORT ------------ Event: time 1351223181.558099, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223181.558102, type 1 (EV_KEY), code 289 (BTN_THUMB), value 0 Event: time 1351223181.558137, -------------- SYN_REPORT ------------ Event: time 1351223182.486137, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223182.486140, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 1 Event: time 1351223182.486172, -------------- SYN_REPORT ------------ Event: time 1351223183.302130, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223183.302132, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 0 Event: time 1351223183.302165, -------------- SYN_REPORT ------------ Event: time 1351223184.030133, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.030136, type 1 (EV_KEY), code 291 (BTN_TOP), value 1 Event: time 1351223184.030166, -------------- SYN_REPORT ------------ Event: time 1351223184.558135, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.558138, type 1 (EV_KEY), code 291 (BTN_TOP), value 0 Event: time 1351223184.558168, -------------- SYN_REPORT ------------ [/code] The directional buttons on the pad are being identified as HAT0Y and HAT0X axes, thats zero, not the letter O. Aparently, this device used to work flawlessly on kernel 2.4.x systems, and even as late as ubunto 10.04. Perhaps the Joydev rules for identifying joypads has changed? Currently, this kind of bug is affecting a few different type of controller adapters, but since this is the one that i PERSONALLY have (and has been driving me my own special brand of crazy), its the one im documenting. What i think should be happening instead: The device should be registering js0 through js3, one for each port, or JS0 that will handle all of the connected devices with different numbered axes for each connected joypad. Either way, it should work as a joystick and stop controlling the mouse cursor. Please help!

  Read the article

• Advice on learning programming languages and math.

  - by Joris Ooms

  I feel like I'm getting stuck lately when it comes to learning about programming-related things; I thought I'd ask a question here and write it all down in the hope to get some pointers/advice from people. Perhaps writing it down helps me put things in perspective for myself aswell. I study Interactive Multimedia Design. This course is based on two things: graphic design on one hand, and web development on the other hand. I have quite a decent knowledge of web-related languages (the usual HTML/JS/PHP) and I'll be getting a course on ASP.NET next year. In my free time, I have learnt how to work with CodeIgniter, aswell as some diving into Ruby (and Rails) and basic iOS programming. In my first year of college I also did a class on Java (19/20 on the end result). This grade doesn't really mean anything though; I have the basics of OOP down but Java-wise, we learnt next to nothing. Considering the time I have been programming in, for example, PHP.. I can't say I'm bad at it. I'm definitely not good or great at it, but I'm decent. My teachers tell me I have the programming thing down. They just tell me I should keep on learning. So that's what I do, and I try to take in as much as possible; however, sometimes I'm unsure where to start and I have this tendency to always doubt myself. Now, for the 'question'. I want to get into iOS programming. I know iOS programming boils down to programming in Cocoa Touch and Objective-C. I also know Obj-C is a superset of C. I have done a class on C a couple of years ago, but I failed miserably. I got stuck at pointers and never really understood them.. Until like a month ago. I suddenly 'got' it. I have been working through a book on Objective-C for a week or so now, and I understand the basics (I'm at like.. chapter 6 or so). However, I keep running into similar problems as the ones I had when I did the C class: I suck at math. No, really. I come from a Latin-Modern Languages background in high school and I had nearly no math classes back then. I wanted to study Computer Science, but I failed there because of the miserable state of my mathematics knowledge. I can't explain why I'm suddenly talking about math here though, because it isn't directly related to programming.. yet it is. For example, the examples in the book I'm reading now are about programming a fraction-calculator. All good, I can do the programming when I get the formulas down.. but it takes me a full day or more to actually get to that point. I also find it hard to come up with ideas for myself. I made one small iOS app the other day and it's just a button / label kind of thing. When I press the button, it generates a random number. That's really all I could come up with. Can you 'learn' that? It probably comes down to creativity, but evidently, I'm not too great at being creative. Are there any sites or resources out there that provide something like a basic list of things you can program when you're just starting out? Maybe I'm focusing on too many things at once. I want to keep my HTML/CSS at a decent level, while learning PHP and CodeIgniter, while diving into Ruby on Rails and learning Objective-C and the iOS SDK at the same time. I just want to be good at something, I guess. The problem is that I can't seem to be happy with my PHP stuff. I want more, something 'harder'; that's why I decided to pick up the iOS thing. Like I said, I have the basics down of a lot of different languages. I can program something simple in Java, in C, in Objective-C as of this week.. but it ends there. Mostly because I can't come up with ideas for more complex applications, and also because I just doubt myself: 'Oh, that's too complex, I can never do that'. And then it ends there. To conclude my rant, let me basically rephrase my questions into a 'tl;dr' part. A. I want to get into iOS programming and I have basic knowledge of C/Objective-C. However, I struggle to come up with ideas of my own and implement them and I also suck at math which is something that isn't directly related to, yet often needed while programming. What can I do? B. I have an interest in a lot of different programming languages and I can't stop reading/learning. However, I don't feel like I'm good in anything. Should I perhaps focus on just one language for a year or longer, or keep taking it all in at the same time and hope I'll finally get them all down? C. Are there any resources out there that provide basic ideas of things I can program? I'm thinking about 'simple' command-line applications here to help me while studying C/Obj-C away from the whole iPhone SDK. Like I said, the examples in my book are mainly math-based (fraction calculator) and it's kinda hard. :( Thanks a lot for reading my post. I didn't plan it to be this long but oh well. Thanks in advance for any answers.

  Read the article

• [Windows 8] Application bar popup button

  - by Benjamin Roux

  Here is a small control to create an application bar button which will display a content in a popup when the button is clicked. Visually it gives this So how to create this? First you have to use the AppBarPopupButton control below.   namespace Indeed.Controls { public class AppBarPopupButton : Button { public FrameworkElement PopupContent { get { return (FrameworkElement)GetValue(PopupContentProperty); } set { SetValue(PopupContentProperty, value); } } public static readonly DependencyProperty PopupContentProperty = DependencyProperty.Register("PopupContent", typeof(FrameworkElement), typeof(AppBarPopupButton), new PropertyMetadata(null, (o, e) => (o as AppBarPopupButton).CreatePopup())); private Popup popup; private SerialDisposable sizeChanged = new SerialDisposable(); protected override void OnTapped(Windows.UI.Xaml.Input.TappedRoutedEventArgs e) { base.OnTapped(e); if (popup != null) { var transform = this.TransformToVisual(Window.Current.Content); var offset = transform.TransformPoint(default(Point)); sizeChanged.Disposable = PopupContent.ObserveSizeChanged().Do(_ => popup.VerticalOffset = offset.Y - (PopupContent.ActualHeight + 20)).Subscribe(); popup.HorizontalOffset = offset.X + 24; popup.DataContext = this.DataContext; popup.IsOpen = true; } } private void CreatePopup() { popup = new Popup { IsLightDismissEnabled = true }; popup.Closed += (o, e) => this.GetParentOfType<AppBar>().IsOpen = false; popup.ChildTransitions = new Windows.UI.Xaml.Media.Animation.TransitionCollection(); popup.ChildTransitions.Add(new Windows.UI.Xaml.Media.Animation.PopupThemeTransition()); var container = new Grid(); container.Children.Add(PopupContent); popup.Child = container; } } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The ObserveSizeChanged method is just an extension method which observe the SizeChanged event (using Reactive Extensions - Rx-Metro package in Nuget). If you’re not familiar with Rx, you can replace this line (and the SerialDisposable stuff) by a simple subscription to the SizeChanged event (using +=) but don’t forget to unsubscribe to it ! public static IObservable<Unit> ObserveSizeChanged(this FrameworkElement element) { return Observable.FromEventPattern<SizeChangedEventHandler, SizeChangedEventArgs>( o => element.SizeChanged += o, o => element.SizeChanged -= o) .Select(_ => Unit.Default); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The GetParentOfType extension method just retrieve the first parent of type (it’s a common extension method that every Windows 8 developer should have created !). You can of course tweak to control (for example if you want to center the content to the button or anything else) to fit your needs. How to use this control? It’s very simple, in an AppBar control just add it and define the PopupContent property. <ic:AppBarPopupButton Style="{StaticResource RefreshAppBarButtonStyle}" HorizontalAlignment="Left"> <ic:AppBarPopupButton.PopupContent> <Grid> [...] </Grid> </ic:AppBarPopupButton.PopupContent> </ic:AppBarPopupButton> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } When the button is clicked the popup is displayed. When the popup is closed, the app bar is closed too. I hope this will help you !

  Read the article

• Why lock-free data structures just aren't lock-free enough

  - by Alex.Davies

  Today's post will explore why the current ways to communicate between threads don't scale, and show you a possible way to build scalable parallel programming on top of shared memory. The problem with shared memory Soon, we will have dozens, hundreds and then millions of cores in our computers. It's inevitable, because individual cores just can't get much faster. At some point, that's going to mean that we have to rethink our architecture entirely, as millions of cores can't all access a shared memory space efficiently. But millions of cores are still a long way off, and in the meantime we'll see machines with dozens of cores, struggling with shared memory. Alex's tip: The best way for an application to make use of that increasing parallel power is to use a concurrency model like actors, that deals with synchronisation issues for you. Then, the maintainer of the actors framework can find the most efficient way to coordinate access to shared memory to allow your actors to pass messages to each other efficiently. At the moment, NAct uses the .NET thread pool and a few locks to marshal messages. It works well on dual and quad core machines, but it won't scale to more cores. Every time we use a lock, our core performs an atomic memory operation (eg. CAS) on a cell of memory representing the lock, so it's sure that no other core can possibly have that lock. This is very fast when the lock isn't contended, but we need to notify all the other cores, in case they held the cell of memory in a cache. As the number of cores increases, the total cost of a lock increases linearly. A lot of work has been done on "lock-free" data structures, which avoid locks by using atomic memory operations directly. These give fairly dramatic performance improvements, particularly on systems with a few (2 to 4) cores. The .NET 4 concurrent collections in System.Collections.Concurrent are mostly lock-free. However, lock-free data structures still don't scale indefinitely, because any use of an atomic memory operation still involves every core in the system. A sync-free data structure Some concurrent data structures are possible to write in a completely synchronization-free way, without using any atomic memory operations. One useful example is a single producer, single consumer (SPSC) queue. It's easy to write a sync-free fixed size SPSC queue using a circular buffer*. Slightly trickier is a queue that grows as needed. You can use a linked list to represent the queue, but if you leave the nodes to be garbage collected once you're done with them, the GC will need to involve all the cores in collecting the finished nodes. Instead, I've implemented a proof of concept inspired by this intel article which reuses the nodes by putting them in a second queue to send back to the producer. * In all these cases, you need to use memory barriers correctly, but these are local to a core, so don't have the same scalability problems as atomic memory operations. Performance tests I tried benchmarking my SPSC queue against the .NET ConcurrentQueue, and against a standard Queue protected by locks. In some ways, this isn't a fair comparison, because both of these support multiple producers and multiple consumers, but I'll come to that later. I started on my dual-core laptop, running a simple test that had one thread producing 64 bit integers, and another consuming them, to measure the pure overhead of the queue. So, nothing very interesting here. Both concurrent collections perform better than the lock-based one as expected, but there's not a lot to choose between the ConcurrentQueue and my SPSC queue. I was a little disappointed, but then, the .NET Framework team spent a lot longer optimising it than I did. So I dug out a more powerful machine that Red Gate's DBA tools team had been using for testing. It is a 6 core Intel i7 machine with hyperthreading, adding up to 12 logical cores. Now the results get more interesting. As I increased the number of producer-consumer pairs to 6 (to saturate all 12 logical cores), the locking approach was slow, and got even slower, as you'd expect. What I didn't expect to be so clear was the drop-off in performance of the lock-free ConcurrentQueue. I could see the machine only using about 20% of available CPU cycles when it should have been saturated. My interpretation is that as all the cores used atomic memory operations to safely access the queue, they ended up spending most of the time notifying each other about cache lines that need invalidating. The sync-free approach scaled perfectly, despite still working via shared memory, which after all, should still be a bottleneck. I can't quite believe that the results are so clear, so if you can think of any other effects that might cause them, please comment! Obviously, this benchmark isn't realistic because we're only measuring the overhead of the queue. Any real workload, even on a machine with 12 cores, would dwarf the overhead, and there'd be no point worrying about this effect. But would that be true on a machine with 100 cores? Still to be solved. The trouble is, you can't build many concurrent algorithms using only an SPSC queue to communicate. In particular, I can't see a way to build something as general purpose as actors on top of just SPSC queues. Fundamentally, an actor needs to be able to receive messages from multiple other actors, which seems to need an MPSC queue. I've been thinking about ways to build a sync-free MPSC queue out of multiple SPSC queues and some kind of sign-up mechanism. Hopefully I'll have something to tell you about soon, but leave a comment if you have any ideas.

  Read the article

• SPARC M7 Chip - 32 cores - Mind Blowing performance

  - by Angelo-Oracle

  The M7 Chip Oracle just announced its Next Generation Processor at the HotChips HC26 conference. As the Tech Lead in our Systems Division's Partner group, I had a front row seat to the extraordinary price performance advantage of Oracle current T5 and M6 based systems. Partner after partner tested  these systems and were impressed with it performance. Just read some of the quotes to see what our partner has been saying about our hardware. We just announced our next generation processor, the M7. This has 32 cores (up from 16-cores in T5 and 12-cores in M6). With 20 nm technology  this is our most advanced processor. The processor has more cores than anything else in the industry today. After the Sun acquisition Oracle has released 5 processors in 4 years and this is the 6th.  The S4 core  The M7 is built using the foundation of the S4 core. This is the next generation core technology. Like its predecessor, the S4 has 8 dynamic threads. It increases the frequency while maintaining the Pipeline depth. Each core has its own fine grain power estimator that keeps the core within its power envelop in 250 nano-sec granularity. Each core also includes Software in Silicon features for Application Acceleration Support. Each core includes features to improve Application Data Integrity, with almost no performance loss. The core also allows using part of the Virtual Address to store meta-data.  User-Level Synchronization Instructions are also part of the S4 core. Each core has 16 KB Instruction and 16 KB Data L1 cache. The Core Clusters  The cores on the M7 chip are organized in sets of 4-core clusters. The core clusters share  L2 cache.  All four cores in the complex share 256 KB of 4 way set associative L2 Instruction Cache, with over 1/2 TB/s of throughput. Two cores share 256 KB of 8 way set associative L2 Data Cache, with over 1/2 TB/s of throughput. With this innovative Core Cluster architecture, the M7 doubles core execution bandwidth. to maximize per-thread performance.  The Chip  Each  M7 chip has 8 sets of these core-clusters. The chip has 64 MB on-chip L3 cache. This L3 caches is shared among all the cores and is partitioned into 8 x 8 MB chunks. Each chunk is  8-way set associative cache. The aggregate bandwidth for the L3 cache on the chip is over 1.6TB/s. Each chip has 4 DDR4 memory controllers and can support upto 16 DDR4 DIMMs, allowing for 2 TB of RAM/chip. The chip also includes 4 internal links of PCIe Gen3 I/O controllers.  Each chip has 7 coherence links, allowing for 8 of these chips to be connected together gluelessly. Also 32 of these chips can be connected in an SMP configuration. A potential system with 32 chips will have 1024 cores and 8192 threads and 64 TB of RAM.  Software in Silicon The M7 chip has many built in Application Accelerators in Silicon. These features will be exposed to our Software partners using the SPARC Accelerator Program.  The M7  has built-in logic to decompress data at the speed of memory access. This means that applications can directly work on compressed data in memory increasing the data access rates. The VA Masking feature allows the use of part of the virtual address to store meta-data.  Realtime Application Data Integrity The Realtime Application Data Integrity feature helps applications safeguard against invalid, stale memory reference and buffer overflows. The first 4-bits if the Pointer can be used to store a version number and this version number is also maintained in the memory & cache lines. When a pointer accesses memory the hardware checks to make sure the two versions match. A SEGV signal is raised when there is a mismatch. This feature can be used by the Database, applications and the OS.  M7 Database In-Memory Query Accelerator The M7 chip also includes a In-Silicon Query Engines.  These accelerate tasks that work on In-Memory Columnar Vectors. Oracle In-Memory options stores data in Column Format. The M7 Query Engine can speed up In-Memory Format Conversion, Value and Range Comparisons and Set Membership lookups. This engine can work on Compressed data - this means not only are we accelerating the query performance but also increasing the memory bandwidth for queries.  SPARC Accelerated Program  At the Hotchips conference we also introduced the SPARC Accelerated Program to provide our partners and third part developers access to all the goodness of the M7's SPARC Application Acceleration features. Please get in touch with us if you are interested in knowing more about this program. 

  Read the article

• Profit's COLLABORATE 10 Session Selections

  - by Aaron Lazenby

  COLLABORATE 2010 is a mere 11 days away (thanks for the reminder @ocp_advisor). Every year I publish my a list of the sessions I think reflect some of the more interesting people/trends in enterprise IT. I should be at all of these sessions, so drop by for a chat--I'll be the guy tapping out emails on my iPad... Monday, April 19 9:15 a.m. - Keynote: Transforming Customer Value, Delivering Highest Customer Service Location: Keynote Hall I never miss Charles Phillips when he speaks--it's one of the best opportunities to get an update on Oracle product developments and strategy. And there's certainly occasion for an update: this will be Phillips' first big presentation since the Oracle + Sun Strategy Update in late January. Phillips is appearing with Oracle Executive Vice President of Development Thomas Kurian which means there should be some excellent information about how customers are using Oracle's complete software and hardware stack to address enterprise IT challenges. The session should provide some excellent context for the rest of the week's session...don't miss it. 10:45 a.m. - Oracle Fusion Applications: Functional Overview Location: South Seas FI met Basheer Khan at COLLABORATE 08 in Denver and have followed his work ever since. He's a former member of the OAUG Board of Directors, an Oracle ACE, and a charismatic enterprise IT expert. Having worked with the Oracle Usability Advisory Board, Basheer should have some fascinating insights to share about the features and interface of Oracle's Fusine Applications. This session, along with Nadia Bendjedou's "10 Things You Can Do Today to Prepare for the Next Generation Applications" (on Tuesday, April 20 8:00 a.m. in room 3662) should give attendees the update they need about Oracle's next-generation applications.   1:15p.m. - E-Business Suite in the Amazon Cloud Location: South Seas HI did my first full-fledged cloud computing coverage at last year's COLLABORATE show (check out my interview with Oracle's Bill Hodak), where I first learned about Amazon's EC2 offering. I've since talked with several people who have provisioned server space on Amazon's cloud with great results. So I'm looking forward to watching the audience configure an instance of the Oracle E-Business Suite release 12 on the cloud while Chuck Edwards from Blue Gecko drives. This session should take some of the mist and vapor out of the cloud conversation.2:30 p.m. - "Zero Sign-on" to EBS - Enabling 96000 Users to Login to EBS Without User Maintenance Location: South Seas HI'll be sitting tight in South Seas H for the next session on Monday where Doug Pepka, a ten-year veteran of communications giant Comcast, will be walking attendees through a massive single sign-on (SSO) project across the enterprise. I'm working on a story about SSO for the August issue of Profit, so this session has real practical value to me. Plus the proliferation of user account logins--both personal and professional--makes this a critical usability/change management issue for IT leaders planning for successful long-term IT implementations.   Tuesday 8:00 am  - Information Architecture for Men in Kilts Location: SURF AGetting to a 8:00 a.m. presentation is a tall order in Las Vegas, but presenter Billy Cripe will make it worth your effort. Not only is the title of this session great, but the content should appeal to any IT strategist looking to push the limits of Web 2.0 technologies in the enterprise. Cripe is a product management director of Enterprise 2.0 and Enterprise Content Management at Oracle, author of Reshaping Your Business with Web 2.0, and a prolific blogger--he knows how information architecture is critical to and enterprise 2.0 implementation.    10:30a.m. - Oracle Virtualization: From Desktop to Data Center Location: REEF FData center virtualization is still one of the best ways to reduce the cost of running enterprise IT. With the addition of Sun products, Oracle has the industry's most comprehensive virtualization portfolio. I must admit, I'm no expert in this subject. So I'm looking forward to Monica Kumar's presentation so I can get up to speed.   Wednesday 8:00 a.m. - The Art of the Steal Location: Mandalay Bay Ballroom JMany will know Frank Abagnale from Steven Spielberg's 2002 film "Catch Me if You Can." The one-time con man and international fugitive who swindled $2.5 million in forged checks went on to help U.S. federal officials investigate fraud cases. Now the CEO of Abagnale and Associates, he has become an invaluable source to the business world on the subject of fraud and fraud protection. With identity theft and digital fraud still on the rise, this session should be an entertaining, and sobering, education on the threats facing businesses and customers around the world. A great way to start Wednesday.1:00 p.m. - Google Wave: Will it replace e-mail as we know it today? Location: SURF EBy many assessments (my own included), Google Wave is a bit of an open collaboration failure. It may seem like an odd reason for me to be excited about this session, but I'm looking forward to the chance to revisit the technology. Also, this is a great case study in connecting free, available Internet tools to existing enterprise computing environments--an issue that IT strategists must contend with as workers spreads out and choose their own productivity tools.  

  Read the article

• Microsoft Codename Houston

  - by kaleidoscope

  On one of the final talks about SQL Azure in Day 3 of PDC09, David Robinson, Senior PM on the Azure team, announced a project codenamed ‘Houston’ which is basically a Silverlight equivalent of SQL Server Management Studio. The concept comes from the SQL Azure being within the cloud, and if the only way to interact with it is by installing SSMS locally then it does not feel like a consistent story. From the limited preview, it only contains the basics but it clearly lets you create tables, stored procedures and views, edit them, even add data to tables in a grid view reminiscent of Microsoft Access. The UI was based around the standard ribbon bar, object window on the left and working pane on the right. As of now this tool is still pre-alpha and it seems like a basic tool that will facilitate rapid database development on cloud. When asked about general availability, no dates were given but calendar 2010 was indicated as the target. More information can be found at:      http://sqlfascination.com/2009/11/20/pdc-09-day-3-sql-azure-and-codename-houston-announcement/   Tinu, O

  Read the article

• LINQ und ArcObjects

  - by Marko Apfel

  LINQ und ArcObjects Motivation LINQ1 (language integrated query) ist eine Komponente des Microsoft .NET Frameworks seit der Version 3.5. Es erlaubt eine SQL-ähnliche Abfrage zu verschiedenen Datenquellen wie SQL, XML u.v.m. Wie SQL auch, bietet LINQ dazu eine deklarative Notation der Problemlösung - d.h. man muss nicht im Detail beschreiben wie eine Aufgabe, sondern was überhaupt zu lösen ist. Das befreit den Entwickler abfrageseitig von fehleranfälligen Iterator-Konstrukten. Ideal wäre es natürlich auf diese Möglichkeiten auch in der ArcObjects-Programmierung mit Features zugreifen zu können. Denkbar wäre dann folgendes Konstrukt: var largeFeatures = from feature in features where (feature.GetValue("SHAPE_Area").ToDouble() > 3000) select feature; bzw. dessen Äquivalent als Lambda-Expression: var largeFeatures = features.Where(feature => (feature.GetValue("SHAPE_Area").ToDouble() > 3000)); Dazu muss ein entsprechender Provider zu Verfügung stehen, der die entsprechende Iterator-Logik managt. Dies ist leichter als man auf den ersten Blick denkt - man muss nur die gewünschten Entitäten als IEnumerable<IFeature> liefern. (Anm.: nicht wundern - die Methoden GetValue() und ToDouble() habe ich nebenbei als Erweiterungsmethoden deklariert.) Im Hintergrund baut LINQ selbständig eine Zustandsmaschine (state machine)2 auf deren Ausführung verzögert ist (deferred execution)3 - d.h. dass erst beim tatsächlichen Anfordern von Entitäten (foreach, Count(), ToList(), ..) eine Instanziierung und Verarbeitung stattfindet, obwohl die Zuweisung schon an ganz anderer Stelle erfolgte. Insbesondere bei mehrfacher Iteration durch die Entitäten reibt man sich bei den ersten Debuggings verwundert die Augen wenn der Ausführungszeiger wie von Geisterhand wieder in die Iterator-Logik springt. Realisierung Eine ganz knappe Logik zum Konstruieren von IEnumerable<IFeature> lässt sich mittels Durchlaufen eines IFeatureCursor realisieren. Dazu werden die einzelnen Feature mit yield ausgegeben. Der einfachen Verwendung wegen, habe ich die Logik in eine Erweiterungsmethode GetFeatures() für IFeatureClass aufgenommen: public static IEnumerable GetFeatures(this IFeatureClass featureClass, IQueryFilter queryFilter, RecyclingPolicy policy) { IFeatureCursor featureCursor = featureClass.Search(queryFilter, RecyclingPolicy.Recycle == policy); IFeature feature; while (null != (feature = featureCursor.NextFeature())) { yield return feature; } //this is skipped in unit tests with cursor-mock if (Marshal.IsComObject(featureCursor)) { Marshal.ReleaseComObject(featureCursor); } } Damit kann man sich nun ganz einfach die IEnumerable<IFeature> erzeugen lassen: IEnumerable features = _featureClass.GetFeatures(RecyclingPolicy.DoNotRecycle); Etwas aufpassen muss man bei der Verwendung des "Recycling-Cursors". Nach einer verzögerten Ausführung darf im selben Kontext nicht erneut über die Features iteriert werden. In diesem Fall wird nämlich nur noch der Inhalt des letzten (recycelten) Features geliefert und alle Features sind innerhalb der Menge gleich. Kritisch würde daher das Konstrukt largeFeatures.ToList(). ForEach(feature => Debug.WriteLine(feature.OID)); weil ToList() schon einmal durch die Liste iteriert und der Cursor somit einmal durch die Features bewegt wurde. Die Erweiterungsmethode ForEach liefert dann immer dasselbe Feature. In derartigen Situationen darf also kein Cursor mit Recycling verwendet werden. Ein mehrfaches Ausführen von foreach ist hingegen kein Problem weil dafür jedes Mal die Zustandsmaschine neu instanziiert wird und somit der Cursor neu durchlaufen wird – das ist die oben schon erwähnte Magie. Ausblick Nun kann man auch einen Schritt weiter gehen und ganz eigene Implementierungen für die Schnittstelle IEnumerable<IFeature> in Angriff nehmen. Dazu müssen nur die Methode und das Property zum Zugriff auf den Enumerator ausprogrammiert werden. Im Enumerator selbst veranlasst man in der Reset()-Methode das erneute Ausführen der Suche – dazu übergibt man beispielsweise ein entsprechendes Delegate in den Konstruktur: new FeatureEnumerator( _featureClass, featureClass => featureClass.Search(_filter, isRecyclingCursor)); und ruft dieses beim Reset auf: public void Reset() {     _featureCursor = _resetCursor(_t); } Auf diese Art und Weise können Enumeratoren für völlig verschiedene Szenarien implementiert werden, die clientseitig restlos identisch nach obigen Schema verwendet werden. Damit verschmelzen Cursors, SelectionSets u.s.w. zu einer einzigen Materie und die Wiederverwendbarkeit von Code steigt immens. Obendrein lässt sich ein IEnumerable in automatisierten Unit-Tests sehr einfach mocken - ein großer Schritt in Richtung höherer Software-Qualität.4 Fazit Nichtsdestotrotz ist Vorsicht mit diesen Konstrukten in performance-relevante Abfragen geboten. Dadurch dass im Hintergrund eine Zustandsmaschine verwalten wird, entsteht einiges an Overhead dessen Verarbeitung zusätzliche Zeit kostet - ca. 20 bis 100 Prozent. Darüber hinaus ist auch das Arbeiten ohne Recycling schnell ein Performance-Gap. Allerdings ist deklarativer LINQ-Code viel eleganter, fehlerfreier und wartungsfreundlicher als das manuelle Iterieren, Vergleichen und Aufbauen einer Ergebnisliste. Der Code-Umfang verringert sich erfahrungsgemäß im Schnitt um 75 bis 90 Prozent! Dafür warte ich gerne ein paar Millisekunden länger. Wie so oft muss abgewogen werden zwischen Wartbarkeit und Performance - wobei für mich Wartbarkeit zunehmend an Priorität gewinnt. Zumeist ist sowieso nicht der Code sondern der Anwender die Bremse im Prozess. Demo-Quellcode support.esri.de   [1] Wikipedia: LINQ http://de.wikipedia.org/wiki/LINQ [2] Wikipedia: Zustandsmaschine http://de.wikipedia.org/wiki/Endlicher_Automat [3] Charlie Calverts Blog: LINQ and Deferred Execution http://blogs.msdn.com/b/charlie/archive/2007/12/09/deferred-execution.aspx [4] Clean Code Developer - gelber Grad/Automatisierte Unit Tests http://www.clean-code-developer.de/Gelber-Grad.ashx#Automatisierte_Unit_Tests_8

  Read the article

• Frameskipping in Android gameloop causing choppy sprites (Open GL ES 2.0)

  - by user22241

  I have written a simple 2d platform game for Android and am wondering how one deals with frame-skipping? Are there any alternatives? Let me explain further. So, my game loop allows for the rendering to be skipped if game updates and rendering do not fit into my fixed time-slice (16.667ms). This allows my game to run at identically perceived speeds on different devices. And this works great, things do run at the same speed. However, when the gameloop skips a render call for even one frame, the sprite glitches. And thinking about it, why wouldn't it? You're seeing a sprite move say, an average of 10 pixels every 1.6 seconds, then suddenly, there is a pause of 3.2ms, and the sprite then appears to jump 20 pixels. When this happens 3 or 4 times in close succession, the result is very ugly and not something I want in my game. Therfore, my question is how does one deal with these 'pauses' and 'jumps' - I've read every article on game loops I can find (see below) and my loops are even based off of code from these articles. The articles specifically mention frame skipping but they don't make any reference to how to deal with visual glitches that result from it. I've attempted various game-loops. My loop must have a mechanism in-place to allow rendering to be skipped to keep game-speed constant across multiple devices (or alternative, if one exists) I've tried interpolation but this doesn't eliminate this specific problem (although it looks like it may mitigate the issue slightly as when it eventually draws the sprite it 'moves it back' between the old and current positions so the 'jump' isn't so big. I've also tried a form of extrapolation which does seem to keep things smooth considerably, but I find it to be next to completely useless because it plays havoc with my collision detection (even when drawing with a 'display only' coordinate - see extrapolation-breaks-collision-detection) I've tried a loop that uses Thread.sleep when drawing / updating completes with time left over, no frame skipping in this one, again fairly smooth, but runs differently on different devices so no good. And I've tried spawning my own, third thread for logic updates, but this, was extremely messy to deal with and the performance really wasn't good. (upon reading tons of forums, most people seem to agree a 2 thread loops ( so UI and GL threads) is safer / easier). Now if I remove frame skipping, then all seems to run nice and smooth, with or without inter/extrapolation. However, this isn't an option because the game then runs at different speeds on different devices as it falls behind from not being able to render fast enough. I'm running logic at 60 Ticks per second and rendering as fast as I can. I've read, as far as I can see every article out there, I've tried the loops from My Secret Garden and Fix your timestep. I've also read: Against the grain deWITTERS Game Loop Plus various other articles on Game-loops. A lot of the others are derived from the above articles or just copied word for word. These are all great, but they don't touch on the issues I'm experiencing. I really have tried everything I can think of over the course of a year to eliminate these glitches to no avail, so any and all help would be appreciated. A couple of examples of my game loops (Code follows): From My Secret Room public void onDrawFrame(GL10 gl) { //Rre-set loop back to 0 to start counting again loops=0; while(System.currentTimeMillis() > nextGameTick && loops < maxFrameskip) { SceneManager.getInstance().getCurrentScene().updateLogic(); nextGameTick += skipTicks; timeCorrection += (1000d / ticksPerSecond) % 1; nextGameTick += timeCorrection; timeCorrection %= 1; loops++; } extrapolation = (float)(System.currentTimeMillis() + skipTicks - nextGameTick) / (float)skipTicks; render(extrapolation); } And from Fix your timestep double t = 0.0; double dt2 = 0.01; double currentTime = System.currentTimeMillis()*0.001; double accumulator = 0.0; double newTime; double frameTime; @Override public void onDrawFrame(GL10 gl) { newTime = System.currentTimeMillis()*0.001; frameTime = newTime - currentTime; if ( frameTime > (dt*5)) //Allow 5 'skips' frameTime = (dt*5); currentTime = newTime; accumulator += frameTime; while ( accumulator >= dt ) { SceneManager.getInstance().getCurrentScene().updateLogic(); previousState = currentState; accumulator -= dt; } interpolation = (float) (accumulator / dt); render(interpolation); }

  Read the article

< Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >