Search Results

Search found 14712 results on 589 pages for 'home hub'.

Page 375/589 | < Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >

• internet sharing over wifi between ubuntu 11.10 and windows7

  - by Vivek Pradhan

  So i have looked up a lot of forums for these solution but haven't really found one that works. I have a laptop running ubuntu 11.10 connected to the ethernet cord at home and i want to share the internet over wifi with my friend's laptop running windows7. I did not think it would be so difficult, I tried a lot of things: I went to networks and then wireless and set up a wifi hotspot, my laptop got connected to it and the ipv4 was set to "shared to other computers". Thankfully the network was discoverable and after some tries my friend was able to connect to the network, but it still showed that there was no internet access. I tried coniguring the tcp addresses of the wifi on his laptop. Bottom line: did not work. I went to the network manager, clicked on create a new wireless network, created one with security WEP 40/128 bit passphrase, tried the other 2 options later, and did the same thing as with the wifi, this network was also not discoverable initially and after some tries, we could connect to it but then ICS was not working although there was a working internet on my ubuntu laptop. I would really appreciate if some one who has faced a similar problem and got it fixed to please give me a step by step solution of how to get this work, because this is a prety common problem with ubuntu distros I have noticed. Note: This however seems to work with ubuntu to ubuntu connections, but specifically cross OS connections like windows or my phone running android ICS are not able to see or if connect not able to share internet on my laptop

  Read the article

• Reduce Bookmarks in Chrome to Toolbar Icons

  - by Asian Angel

  Do you want to make the most efficient use of the space in Chrome’s Bookmarks Toolbar? Now you can reduce the bookmarks to icons with just a few minutes work. Note: You may or may not wish to do some reorganizing with your bookmarks before-hand. Condensing the Bookmarks If your browser is anything like ours then it has not taken long to fill up your Bookmarks Toolbar. Accessing the drop-down section often throughout the day is not too fun. The bookmarks are the easiest part of your collection to condense. Right-click on each bookmark and select “Edit…” to open the Edit Bookmark Window. Delete the text, click OK, and you are finished. You still have a useable bookmark that looks nice and takes up very little room. These are our bookmarks from the first screenshot above…no problems with accessing all of them now. With just a few minutes work you can have a beautiful and compact Bookmarks Toolbar. If you have been looking for a more efficient and compact Bookmarks Toolbar in Chrome, then this little hack will certainly be useful for you. Similar Articles Productive Geek Tips Reduce Your Bookmarks Toolbar to a Toolbar ButtonAccess Your Bookmarks with a Toolbar Button in Google ChromeConvert Chrome Bookmark Toolbar Folders to IconsAdd the Bookmarks Menu to Your Bookmarks Toolbar with Bookmarks UI ConsolidatorCompact Toolbar Buttons in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes

  Read the article

• Your Experience Platform

  - by David Dorf

  Crosstalk once again exceeded my expectations, improving upon last year's conference in terms of venue, knowledge sharing, and entertainment.  Its great to see the Oracle Retail family continues to grow, especially outside the US.  I had a great time talking to retailers, analysts, press, and colleagues from around the world. Because the economy, demographics, technology, etc. are constantly changing, retailers must always be evolving their business to capture the next market.  But it takes guts to change something that appears to be working, and it takes a bit of luck to get the timing right.  To a large extent, innovation is about "guts and luck." To help retailers innovate, Oracle Retail provides all the necessary software to create Your Experience Platform.  There is no "Oracle Experience Platform" as each retailer needs something different to deliver on their brand promise.  We provide the actionable insight, optimized operations, and connected interactions, but its still up to the retailer to make it theirs. One such retailer is Masters, a home improvement retailer in Australia formed through a partnership between Woolworths and Lowes.  Woolworths is an established retailer in Australia, so they are already close to their customers and able to understand their needs.  In Australia 74% of dwellings are detached houses and the population is continues to "move up" into bigger and bigger homes. Masters is using Oracle Retail's software to create their experience platform that will deliver on their brand promise, which includes everyday low prices, wide range of products, smarter self-service, and an inviting store environment.  The Oracle Retail software provides the foundation that allows them to rapidly deliver on this promise -- Masters is engineered for success.

  Read the article

• I need a few minutes of dedicated server a week, but not for hosting, just to convert ogg etc.

  - by talkingnews

  I'm completely happy with my webhosting, it's just that I need to do one little thing they won't allow, and that's run an instance of Sox to convert about 30 mp3s to ogg files, in various directories, a couple of times a week, to be done automatically in response to the detection of the upload of an mp3. Probably looking at a minute of server time over the whole week. I've had unhelpful suggestions on other forums like "why not leave your home PC on 24 hours a day and then use all your isp bandwidth to do this", which doesn't work for me. I know that I can host files on, say, Amazon S3, but is there something similar for my needs? All it would need to do would be: wget/ftp the mp3 files, convert them to ogg, ftp the files back to my hosting. Of course, all this wouldn't be needed if there was such a thing as a compiled binary of Sox (or any mp3ogg converter) for Centos which I could upload without needing root access, but I've given up asking that one, but always open to suggestions!

  Read the article

• Synergy on Mac OS X 10.7

  - by matt

  Unfortunately, I can't seem to get Synergy to work between two Mac clients both using 10.7. One is an older 21" iMac and the other is a new 2011 Macbook Air. Here's my synergy.conf, symlinked to my home directory as ~/.synergy.conf section: screens foo: bar: super = alt alt = super end section: links foo: right = bar bar: left = foo end That is, I thought the super = alt trick was mandatory in order to have alt work on Mac but unfortunately, nothing really works. Both the Command and Control keys do NOT work on bar but work fine on foo given that the keyboard is paired with that screen. The keyboard modifier keys are the same on both computers and the making the mouse go between screens works as well. I was wondering if anyone else had any success or problems running into this issue on 10.7 and was hoping there was a possible fix.

  Read the article

• What is an elegant way to install non-repository software in 12.04?

  - by Tomas

  Perhaps I missed something when Canonical removed the "Create launcher" option from the right click menu, because I've really been missing that little guy. For me, it was the preferred way to install software that comes not in a .deb, but in a tar.gz, for example. (Note: in that tar.gz I have a folder with the compiled files, I'm NOT compiling from source) I just downloaded the new Eclipse IDE and extracted the tar.gz to my /usr folder. Now, I'd like to add it to my desktop and dash so it can be started easily. Intuitively I would right click the desktop and create a launcher. After this I'd copy the .desktop to /usr/share/applications. However, creating a launcher is not possible. My question: How would you install an already compiled tar.gz that you have downloaded from the internet? Below are a few things I've seen, but these are all more time-consuming than the right click option. If you have any better ideas, please let me know. Thanks! Manual copy & create a .desktop file: manually Simply extract the archive to /usr. Create a new text file, adding something along the lines of the code block below: [Desktop Entry] Version=1.0 Type=Application Terminal=false Exec="/usr/local/eclipse42/eclipse" Name="Eclipse 4.2" Icon=/home/tomas/icons/eclipse.svg Rename this file to eclipse42.desktop and make it executable. Then copy this to /usr/share/applications. Manually copy & create a .desktop file: GUI fossfreedom has elaborated on this in How can I create launchers on my desktop? Basically it involves the command: gnome-desktop-item-edit --create-new ~/Desktop After creating the launcher, copy it to /usr/share/applications.

  Read the article

• Restoring an Ubuntu Server using ZFS RAID-Z for data

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own Home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and ZFS (OS on 1 Ext4 disk, Data on 3 RAID-Z disks). As Joel Spolsky and Geoff Atwood say with regards to backup, I can't rest until I have done a restore in all of the failure scenarios that I am seeking to protect against. Q: How to configure Ubuntu Server to recognise a pre-existing RAID-Z array? Clearly if one of the data disks die - then that is a resilvering scenario, which is well documented. If two of the data disks die, then I am into regular backup/restore land. If the OS dies and I can restore, also an easy scenario. But if the OS dies and I can't restore, then I need to recreate an Ubuntu server. But how do I get this to recognise my RAID-Z array? Is the necessary configuration information stored within and across the RAID-Z array and simply need to be found (if so, how)? Or does it reside on the OS ext4 disk (in which case how do I recreate it)?

  Read the article

• How to Add Any Application to the Windows Desktop Right-Click Menu

  - by The Geek

  If you want really quick access to launch a frequently used application without putting extra icons on your desktop, you can add that application to the context menu for the desktop with a simple registry hack. Here’s how to do it. Naturally, we’ve also covered the opposite scenario—how to clean up your messy Windows context menu, which is an equally useful read if you’ve got a bunch of items you want to remove from the menu. Note: this article was originally published a few years ago, but we’ve updated and polished it for Windows 7 and are republishing it for you today. Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

  Read the article

• XDMCP works for Solaris, not for RHEL

  - by joshxdr

  I have some old RHEL4 servers that until recently I was able to connect to remotely with Exceed (remote desktop using XDMCP) from my windowsXP PC. My PC is connected to our network by wired LAN. Recently it seems something has changed in our network. I can still connect to all the old Solaris and HPUX servers with Exceed, but for some reason I can no longer connect to the RHEL4 servers. I assume this is some kind of "security" feature turned on in our network. Does anyone know what this might be, and how I can tell IT to re-enable it? Update: A colleague has found that he can connect (very slowly) to these RHEL4 boxes with XDMCP if he is using our VPN from home, but when he is in the office using wired LAN he cannot connect to them. So it seems that there is some kind of firewall or ???, part of our wired LAN network, that is blocking XDMCP traffic from RHEL4.

  Read the article

• Configure Console2 to open bash in current folder

  - by davidkennedy85

  I've seen this but it doesn't work for me. I'm not using Git's version of bash but the one that comes with cygwin, so that could be part of the problem. Here is how I have my tab in Console2 set up: Title: bash.exe Shell: C:\cygwin\bin\bash.exe --login -i Startup dir: %HOMEDRIVE%%HOMEPATH% This is my registry entry: Directory shell Console2 Open Console2 Here command "C:\Console2\Console.exe" -d "%1" bash always starts in my home directory instead of the directory I'm clicking on, then I have to cd /cygdrive/d/code ... etc. I tried removing the value in the "Startup dir" field, changing it to %1, %1% with no luck. I also tried this solution but it didn't work for me either: Title: bash.exe Shell: C:\cygwin\bin\bash.exe -l Registry: Directory shell Console2 Open Console2 Here command "C:\Console2\Console.exe" -d "%V" .profile file in root directory: cd - Any ideas?

  Read the article

• Internship in License Contract Management

  - by cristian.condurache(at)oracle.com

  Hi Everyone, My name is Luca. I am an intern in the License Contract Management team in Italy. I have studied Economics and Business in Pescara and finished my Master’s Degree in July 2009. After a short work experience near my home town I decided to look for a job in an International Company. I got in touch with Oracle in January 2010. I had a telephone interview and then a face-to-face interview. On a cold and grey morning, I arrived in Milan....my first impression was fantastic....a big modern building with wide TVs everywhere. I was a little nervous but very excited. I understood this could be a great opportunity... The interview went well and I started to work in March. After a training period I was quickly involved in the closing of the last quarter of the fiscal year - of which May is the last month at Oracle. Working as a License Contract Manager is a real challenge for a fresh graduate. It involves thoroughly understanding the Oracle Policies and Practices with regards to License Contracts. In my experience, especially in May, I learnt to work under high pressure, within time constrains, and to keep up with constant changes. In this period I also had the opportunity to be involved in different negotiations, being directly in contact with the customers. This helped me to develop my relational skills during complex transactions. Looking back at the nine months at Oracle I can say I have a better understanding of the IT world. It is a complex environment that changes continously, offering new challenges to learn from everytime. If you have any questions related to this article feel free to contact [email protected]. You can find our job opportunities via http://campus.oracle.com. Technorati Tags: License Contract Management,oppotunity,Oracle Policies,internship

  Read the article

• juju -v status ERROR Invalid SSH key

  - by Captain T

  root@cloudcontrol:/storage# juju -v status 2012-06-07 11:19:47,602 DEBUG Initializing juju status runtime 2012-06-07 11:19:47,621 INFO Connecting to environment... 2012-06-07 11:19:47,905 DEBUG Connecting to environment using node-386077143930... 2012-06-07 11:19:47,906 DEBUG Spawning SSH process with remote_user="ubuntu" remote_host="node-386077143930" remote_port="2181" local_port="57004". The authenticity of host 'node-386077143930 (10.5.5.113)' can't be established. ECDSA key fingerprint is 31:94:89:62:69:83:24:23:5f:02:70:53:93:54:b1:c5. Are you sure you want to continue connecting (yes/no)? yes 2012-06-07 11:19:52,102 ERROR Invalid SSH key 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@658: Client environment:zookeeper.version=zookeeper C client 3.3.5 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@662: Client environment:host.name=cloudcontrol 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@669: Client environment:os.name=Linux 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@670: Client environment:os.arch=3.2.0-23-generic 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@671: Client environment:os.version=#36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@log_env@679: Client environment:user.name=sysadmin 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@log_env@687: Client environment:user.home=/root 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@log_env@699: Client environment:user.dir=/storage 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@zookeeper_init@727: Initiating client connection, host=localhost:57004 sessionTimeout=10000 watcher=0x7feb11afc6b0 sessionId=0 sessionPasswd= context=0x2dc7d20 flags=0 2012-06-07 11:19:52,429:18541(0x7feb0e856700):ZOO_ERROR@handle_socket_error_msg@1579: Socket [127.0.0.1:57004] zk retcode=-4, errno=111(Connection refused): server refused to accept the client 2012-06-07 11:19:55,765:18541(0x7feb0e856700):ZOO_ERROR@handle_socket_error_msg@1579: Socket [127.0.0.1:57004] zk retcode=-4, errno=111(Connection refused): server refused to accept the client This is from a clean install with 2 nodes all running 12.04 Precise juju bootstrap - finishes with no errors and allocates the machine to the user but still no joy after juju environment-destroy and rebuild with different users and different nodes. Anyone got any ideas

  Read the article

• Setting up dante socks server

  - by skerit

  I want to tunnel all my internet traffic through my vps, so I'm trying to install a proxy server. However: I can't seem to browse the internet through Dante. I get the ERR_EMPTY_RESPONSE error. This is my config: logoutput: stderr /home/user/dantelog internal: eth1 port=1080 external: eth1 method: username pam user.privileged: proxy user.notprivileged: nobody user.libwrap: nobody client pass { from: 10.0.0.0/8 port 1-65535 to: 0.0.0.0/0 } Do I really have to run 2 proxy servers: one for http and one for socks? or is there something else I can do?

  Read the article

• Bash Shell Hangs on ?+Tab-complete

  - by michaelmichael

  I often use tab completion in Bash when completing directories, but I find that it hangs for an unacceptable amount of time if I accidentally include a question mark in the directory. I'd like to know why and how to prevent it if possible. Here's the scenario: I start a command and use the ~ key to represent home: ls ~?Desktop/co Oops! I held down the Shift for a split-second too long. I had intended for ? to be /. But (oh no!) muscle memory has already kicked in. I've hit the Tab before I noticed the mistake. Now I'm stuck waiting for the shell to beep angrily at me. Usually a minute or two. What happened? Why did the question mark cause it to hang and eventually beep? Any way to stop it from hanging?

  Read the article

• Troubleshooting Your Network with Oracle Linux

  - by rickramsey

  Are you afraid of network problems? I was. Whenever somebody said "it's probably the network," I went to lunch. And hoped that it was fixed by the time I got back. Turns out it wasn't that hard to do a little basic troubleshooting Tech Article: Troubleshooting Your Network with Oracle Linux by Robert Chase You're no doubt already familiar with ping. Even I knew how to use ping. Turns out there's another command that can show you not just whether a system can respond over the network, but the path the packets to that system take. Our blogging platform won't allow me to write the name down, but I can tell you that if you replace the x in this word with an e, you'll have the right command: tracxroute Once you get used to those, you can venture into the realms of mtr, nmap, and netcap. Robert Chase explains how each one can help you troubleshoot the network, and provides examples for how to use them. Robert is not only a solid writer, he is also a brilliant motorcyclist and rides an MV Augusta F4 750. About the Photograph Photo of flowers in San Simeon, California, taken by Rick Ramsey on a ride home from the Sun Reunion in May 2014. - Rick Follow me on: Personal Blog | Personal Twitter   Follow OTN Garage on: Web | Facebook | Twitter | YouTube

  Read the article

• How can I create and add a new slide type to the New Slide menu in PowerPoint?

  - by ObligatoryMoniker

  On the Home ribbon in Power Point 2007 there is a new slide button with an arrow that shows you various types of slides that you can add to your presentation: Title Slide, Title and Content, Comparison, Title Only, etc. I want to design a new type of slide that has 4 content areas instead of two and then be able to add new slides of this type using the new slide menu. I know that I can add new Power Point templates but that would require me to start a new presentation with my custom slide type in it and the copy and paste that slide into the current presentation that I am already working on. How can I create a new slide type and then add it to the menu so that I can quickly create new slides of my new 4 content area slide type?

  Read the article

• correct Installation and configuration of openJDK and R

  - by Marco K

  I am relatively new to Ubuntu so I wont know a lot of commands that probably became standard to a lot of you guys. I am trying to set up R and with it the necessary java dependencies to install e.g. JGR, rjava, etc. I read through quite a few instructions to do that but somehow I must have done sth wrong. Here is the state of R and java: R --version R version 2.14.1 (2011-12-22) Copyright (C) 2011 The R Foundation for Statistical Computing ISBN 3-900051-07-0 Platform: x86_64-pc-linux-gnu (64-bit) java -version java version "1.6.0_23" OpenJDK Runtime Environment (IcedTea6 1.11pre) (6b23~pre11-0ubuntu1.11.10.1) OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode) R CMD javareconf Java interpreter : /usr/bin/java Java version : 1.6.0_23 Java home path : /usr/lib/jvm/java-6-openjdk/jre Java compiler : /usr/bin/javac Java headers gen.: /usr/bin/javah Java archive tool: /usr/bin/jar Java library path: /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server:/usr/lib/jvm/java-6-openjdk/jre/lib/amd64:/usr/lib/jvm/java-6-openjdk/jre/../lib/amd64:/usr/java/packages/lib/amd64:/usr/lib/jni:/lib:/usr/lib JNI linker flags : -L/usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server -L/usr/lib/jvm/java-6-openjdk/jre/lib/amd64 -L/usr/lib/jvm/java-6-openjdk/jre/../lib/amd64 -L/usr/java/packages/lib/amd64 -L/usr/lib/jni -L/lib -L/usr/lib -ljvm JNI cpp flags : But when I try to install 'JavaGD' in R, which is a dependency for JGR I get: ... checking Java support in R... present: interpreter : '/usr/bin/java' cpp flags : '' java libs : '-L/usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server -L/usr/lib/jvm/java-6-openjdk/jre/lib/amd64 -L/usr/lib/jvm/java-6-openjdk/jre/../lib/amd64 -L/usr/java/packages/lib/amd64 -L/usr/lib/jni -L/lib -L/usr/lib -ljvm' configure: error: One or more Java configuration variables are not set. Make sure R is configured with full Java support (including JDK). Run R CMD javareconf as root to add Java support to R. ... Any help would be greatly appreciated. Thanks!

  Read the article

• How do create an encrypted system with multiple Linux distributions?

  - by niels

  A few weeks ago I created a completely encrypted system on a notebook and must say I like the idea. It's a little bit annoying to enter the password on every boot, but it's nice to know even if I loose the computer I don't give my data to other people. With the alternate-cd it's easy to do. Now I have to setup a new system where I want to combine the new idea with my usual usage strategy. There I have more partitions: 3 system, Home, Different Data-Partitions for vm-data, photo-data and mp3-data. The background is that I prefer not to update a system. I prefer to install the new version parallel to the old system. So I can easily test it. Obviously the Data-Partitions are used for both systems. My questions is, how can I easily combine both my strategy and the crypto-approach? Or is it impossible. The way to do the crypted stuff by hand is in my eyes to complicated.

  Read the article

• Desktop Fun: Wolves Wallpaper Collection

  - by Asian Angel

  Wolves represent aspects of nature that refuse to be tamed, seeking to remain forever free. If you feel a special kinship with these spirited creatures, then you will definitely want to bring this beautiful pack home to your desktop. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution. Latest Features How-To Geek ETC Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) Bring a Touch of the Wild West to Your Desktop with the Rango Theme for Windows 7 Manage Your Favorite Social Accounts in Chrome and Iron with Seesmic E.T. II – Extinction [Fake Movie Sequel Video] Remastered King’s Quest Games Offer Classic Gaming on Modern Machines Compare Your Internet Cost and Speed to Global Averages [Infographic] Orbital Battle for Terra Wallpaper

  Read the article

• Cisco ASA 5505 - L2TP over IPsec

  - by xraminx

  I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

  Read the article

• Fixing SharePoint 2010 Permission Problems on Windows 7

  - by Ricardo Peres

  I had a tough time trying to have SharePoint working perfectly on a Windows 7 development machine that was occasionally disconnected from the Active Directory (when I am home I must connect through a VPN). I mostly had problems with service applications such as User Profile, Managed Metadata, Business Connectivity Services and the like, and all I knew were cryptical messages such as “access denied” or “the service or application pool is not started”. I was sure that both the services and application pools were running under a domain account that had proper permissions on the SQL Server instance, and basically it was a fresh installation. Lots of people are having the same problem, apparently. After banging my head against the wall for several days, I remembered about farm (what I had) versus stand-alone (which I had never tried) installations. Bingo! Here’s what I did: I dropped all SharePoint databases and logins and reinstalled SP from scratch, only this time not in farm mode, but as stand-alone. After the SharePoint Configuration Wizard started, I cancelled it and started the Management Shell. I created the configuration database manually by using the New-SPConfigurationDatabase cmdlet where I specified a local account – something that the Configuration Wizard wouldn’t allow me to do. Then I restarted the Configuration Wizard and everything began working perfectly! Yes, I got some pre-configured service applications and also some content which I didn’t need, but I realized it was possible to drop and recreate everything the way I wanted to. All services and application pools are now running under local accounts, which is fine for my development needs. Really, Microsoft… I hope this will bring light to someone facing the same problems!

  Read the article

• Where is the best location to keep shared-developer website files in the linux hierarchy?

  - by Tchalvak

  I just started hosting files for a website on my server, and I'm not sure where is an appropriate place to keep them. At the moment, I have them in /var/www/name.of.virtualhost.site/www/. That's obviously not secure because anything below the final public /www/ folder is also available since the /var/www/ contents are already being served up. For example, /var/www/name.of.virtualhost.site/docs/site_policies.txt is accessible via something like defaultsite.com/name.of.virtualhost.site/docs/site_policies.txt. So where is a good place to store the files that make up a website? (when it's a site that only I'm developing, I can obviously just stick them in /home/my_username/sites/name.of.virtualhost.site/, but that doesn't work well when I want other developers to be working on the site's files as well) I'm running a LAMP stack, not that I expect it to matter.

  Read the article

• Partition error being reported by only some programs

  - by Mahmoud20070

  I am getting an error about the partitions on one of my drives. I checked my hard disk with Acronis Disk Director 11 Home, HDTunePro, MiniTool Partition Wizard, Hddscan, HDD Regenerator 2011, WD Data Lifeguard Diagnostics, GParted, and Parted Magic, but none of them found any problems with the drive. However, when I perform a check with PartitionGuru, DiskGenius, and an old version of Partition Magic (8.0), I get the following error (seen below) about the partition being bad and needing to reformat to fix it: Error - The number of sectors record in DBR overflow - Reformat Should I reforamt or not? I checked two other hard drives, one of them like my 500 WD Blue, and neither has any errors with any progras. Are there any other programs that can check partitions for errors? Finally, how should a large SATA hard disk be formatted? I currently use programs like GParted, Acronis Disk Director, or MiniTool Partition Wizard. Are these programs good for formatting a new hard disk? Could the choice of format tool be the cause of the error?

  Read the article

• OT: Fixing choppy video playback on OS X

  - by terrencebarr

  This is a bit off-topic but I wanted to share because it seems a lot of people are running into issues with choppy video playback and stutter on Mac OS X. I am using a Mac Mini with Snow Leopard (10.6.8) as a home media center and it has worked great in the past, playing back music and videos from multiple sources (web, quicktime, VLC, EyeTV). A few weeks ago the video playback from all my sources started to become choppy, to stutter, and often the picture would hang for seconds at a time. Totally unusable. Drove me nuts for two weeks. After much research and trial-and-error it turns out the problem was an outdated Flash Player which seems to have messed up the video pipeline for the entire system. The short is, I updated the Flash Player to version 11 directly from the Adobe web site, rebooted the Mac Mini, and all is well again! Judging from the various posts across the web, video playback appears to be a fairly widespread problem for Mac users and I hope this helps some of you out there! And I can’t wait to get rid of Flash altogether – I can’t remember the times it has crashed my browser, hung my system, and screwed up things. Thanks Adobe ;-( Cheers, – Terrence Filed under: Uncategorized Tagged: Adobe Flash, Mac OS X

  Read the article

• How can I quickly change display settings (dual monitor setup / single monitor setup on laptop)?

  - by Daren Thomas

  I have my laptop (running Windows XP SP3) at work hooked up to an external monitor. Whenever I unplug the external monitor (time to go home!) I have to manually change the display settings. This takes time and involves a lot of clicks. Is there a way to automate changing these settings? I'm thinking of a hotkey solution or a little application that I can start with Launchy to toggle between two profiles. I use the MultiMon tool for "extending" the taskbar to the second monitor - will I have to give that up?

  Read the article

< Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >