Search Results

Search found 15651 results on 627 pages for 'setup'.

Page 376/627 | < Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >

• Booting a native Windows install in Virtualbox: is it possible?

  - by Aron Rotteveel

  I am looking for something similiar to Bootcamp. Currently, I run Ubuntu Maveric as my primary operating system and run Windows 7 in Virtualbox. For some tasks, however, running Windows virtualized just seems to result in too much overhead and speed loss, and I'd like to be able to boot natively. The ideal situation would be to setup Windows and Ubuntu in dual boot on seperate partitions, with the ability to boot the Windows partition in Virtualbox on Ubuntu as well. Is this possible? Also, how it is that Bootcamp seems to be the only system capable of this?

  Read the article

• Installation on SSD with Windows preinstalled

  - by ebbot

  I bought a laptop with this fancy SSD drive, fancy new UEFI aso. I figured at first Windows out Ubuntu in but after doing 3 DoA on 3 laptops in one day I realized that maybe keeping Windows could come in handy. So dual boot it is. And this is what I've got: Disk 1 - 500 Gb HD 300 Mb Windoze only says "Healthy" don't know what it's for. 600 Mb "Healthy (EFI partition)" 186.30 Gb NTFS "OS (C:)" "Healthy (Boot, Page File, Crash Dump, Primary Partition)" 258.45 Gb NTFS "Data (D:)" "Healthy" 20.00 Gb "Healthy (Recovery Partition)" Disk 2 - 24 Gb SSD 4.00 Gb "Healthy (OEM Partition)" 18.36 Gb "Healthy (Primary Partition)" So I'm not sure what the first partition on each drive does (the 300 Gb on the HD and the OEM Partition on the SSD. Nor do I know what Data (D:). I think the 2nd partition on the SSD is for some speedup of Windoze. I'm debating if I should shrink the OS (C:) drive to around 120 GB or so. Clear the Data (D:) and also use the whole SSD for Ubuntu. That would leave me 24 Gb for e.g. / on the SSD and some 320 Gb on the HD for /home and swap. Is this a reasonable setup? Do I need to configure fstab for the SSD differently to a HD?

  Read the article

• Is there a "pattern" or a group that defines *rc files in *nix environments?

  - by Somebody still uses you MS-DOS

  I'm starting to use command line a little more, and I see there are a lot of ways to configure some config files in my $HOME. This is good, since you can customize it the way you really like. Unfortunately, for begginners, having too many options is a little confusing. For example, I created .bash_alias for some alias I'm using. I didn't even know this option existed, I'm used to simply edit .bashrc. Do exist a pattern, a "good practice", envisioning flexibility and modularity in terms of rc files structure? Do exist a standardization group for this, or every body just creates it's own configuration setup?

  Read the article

• Should the hostname of my VPS point to the dedi IP of my Domain or to to a shared one used for new account creation?

  - by thomas

  I leased a VPS which I want to use to sell shared hosting. 3 IPs - I call them A, B and C here for simplicity. Actual setup is: A=NS1.mydomain.com; host.mydomain.com and is used to set-up new accounts in shared environment B=NS2.mydomain.com C=dedicated IP for mydomain.com (SSL secured) The more I read about DNS, the more I get confused; thus my question: Is this configuration "Good Practice", especially the hostname pointing to A rather than to C? And what would be a better alternative?

  Read the article

• Is there any way to do "mail server parking"?

  - by percyboy

  I am managing a mail server, which will be temporarily closed for three or four days due to the data center maintenance. I want to find a solution to (completely or partly) solve the lost mails during this unavailable period. Because the data volume is huge, it is very hard to migrate it to other data center. One approach I think out is to setup a temporary mail server in other data center, and when new mail received, the mail server automatically sends a return mail to tell the sender "We are temporarily closed for three or four days. Please send the mail later or contact in other means." I am wondering is this approach possible with existed mail server ? Or something better available ? (free solution is preferred for it is only for temporary)

  Read the article

• Linux/OS X dualboot on a Macbook Pro with RAID

  - by GaretJax

  I'd like to install Gentoo Linux on my Macbook Pro by keeping my current OS X installation. I currently have OS X installed on a RAID 0 on two 160GB Intel SSDs and I'd like to create a new partition for Gentoo alongside OS X without losing the RAID setup but, from what I read on the net, Apple's software RAID is poorly (read "not at all") supported: BootCamp refuses to create a windows partition on a RAID volume rEFIt is not able to boot an OS from a software RAID even Apple's recovery partition for Lion can't be created on a RAID volume Is there a way to dual boot my Macbook while keeping the RAID solution?

  Read the article

• SQL Server 2012 LocalDB

  - by user3061846

  I´m a noobie so please be patient ! I developed an app using C# and SQL Server Express 2012 with a local database, my connection string is"Data Source=localhost ; Initial Catalog = scalnet ; Integrated Security=SSPI; Trusted_Connection=Yes"; Everything worked ok till the time I made a setup and tried to install my app in another computer. My first question is: - What version of SQL should I install is this machine? it should be as ligth as possible. - I tried to install SQL exprees 2012 but it gives me an error when I execute my app "A network related or instance specific error occurred while establishing a ..... (provider:Named Pipes Provider, error:40 - Could not open a connection to SQL server." This probably should be a problem with the server configuration but I have no ideia how to solve this... Can anyone point me to the rigth direction ? ? Thanks

  Read the article

• I can connect to Samba server but cannot access shares.

  - by jlego

  I'm having trouble getting samba sharing working to access shares. I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. It needs to be able to share files with a Windows 7 PC and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool on Fedora. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error: 0x80070035 " Windows cannot access \\SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error: The original item for ShareName cannot be found. When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: I Figured it out, it was because I was sharing a second hard drive. See checked answer below. Speculation 1: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? Speculation 2: As the directory I am trying to share is actually an entire internal disk, I have tried these things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. Speculation 3: Whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Speculation 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. Speculation 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally)

  Read the article

• OpenVPN on port 53

  - by TossUser

  I have an openvpn server setup on UDP port 53 on a public IP. All the connecting clients gets pushed external DNS servers such as 8.8.8.8 and opendns. Sometimes the resolution stops working on the connected vpn clients and I get strange packets in the openvpn log. Now my question is why is that? When a VPN client, let's say 192.168.1.22 does a DNS query that query should go to 8.8.8.8:53 and then an UDP response packet should be sent back to 192.168.1.22 on a high UDP port. Any ideas? Thanks

  Read the article

• Unable to install ZFS (Ubuntu 13.10)

  - by user209707

  I'm fairly new to Ubuntu and wanted to setup a server running ZFS/XBMC - The XBMC install went fine, however I ran into trouble getting ZFS working. Configuration : Ubuntu 13.10 (GNU/Linux 3.12.0-rc7+ x86_64) I attempted to install ZFS native using : sudo add-apt-repository ppa:zfs-native/stable sudo apt-get update sudo apt-get install ubuntu-zfs This failed to install due to "Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed." Trying sudo modprobe zfs shows FATAL error : module not found. Here, they mentioned it was to do with lacking build dependences- I followed the answer which was to run sudo apt-get remove --purge ubuntu-zfs zfs-dkms zfsutils spl spl-dkms libzfs1 dkms Then, REBOOT. Then, do: sudo apt-get install linux-headers-generic build-essentia sudo apt-get install ubuntu-zfs " This leaves me in the same situation with "Building only for 3.12.0-rc7+ Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed." when trying to install ubuntu-zfs. Trying sudo apt-get install --reinstall zfs-dkms also does not work.

  Read the article

• Created a new zone in DNS manager - can't get site bindings to work in iis 7

  - by nick gowdy

  Firstly I would like to say that I am a noob when it comes to DNS, I am a web developer and I am trying to setup an intranet site for a charity. I have windows server 2008 and I installed both iis 7 and dns manager. In IIS I have this binding that works - Type: http:// IP Address: 192.168.1.9 Port: 80 Host name: My host name is empty and when I try to navigate to this website on the network, the http code is 200 and the page renders. Now if I try Host name of test.organization.intranet Internet explorer says "Internet Explorer cannot display the webpage" and the server response is aborted. In DNS manager I created a new forward lookup zone of organization.intranet I did this through the configure a dns server wizard and I created a host (A) with the same IP as the one being used in IIS. The full Host name is test.organization.intranet but it doesn't work. Maybe I am missing something obvious because it's not an area of IT that I know very well, but I am stuck for why I can't get it to work.

  Read the article

• Authenticated proxy in Windows command prompt

  - by tlvince

  My Internet access is delivered through an authenticated proxy. This is setup correctly in the "Internet Options" control panel applet and all browsing/GUI apps work fine. For cmd, proxy settings are typically set by exporting http_proxy. The applications I'm trying to use are git and Putty's pscp.exe. I've tried the following syntax to no avail: set http_proxy=http://username:[email protected]:port/ I've also experimented with Netsh.exe and ProxyCfg.exe with no luck. How does one configure an authenticated proxy in the Windows command prompt?

  Read the article

• Cannot Login as root

  - by Josh Moore

  At my work we ship our product on pre-installed servers as a software/hardware package. We are using open SUSE 10.3 for the OS and we setup and we always log in with the root user to do maintenance on the box. Recently we just had box returned to us that the customer said the could not longer connect to the box through the network interface. So when I started to work on the box I run into the this problem: At the command prompt to login i type the user name "root" and hit enter. Then even before it asks me for a password I get "Login incorrect". I have never seen this behavior before and could not find any information about it online. Does anybody know what is going on? Thanks.

  Read the article

• Sharing VPN access between two computers on the LAN

  - by Axelle Ziegler

  I have VPN access to several machines in my office from my home machine. I'd like to be able to access those machines from another computer on my LAN, without setuping a second VPN access. Both computers are Windows 7 machines. Is there a way for my "main" computer to share its VPN access to another machine on the LAN? How would one setup this share? I don't think "simple" Internet connection sharing fits my needs because: My LAN already has its own DHCP/Router to access the Internet, and I'd like to keep it this way I can't access the Internet through my VPN connection

  Read the article

• Where do I find a free (open source preferably) VNC management tool?

  - by thenior

  Hello, I am trying to get remote internal setup for our business. Basically, I just want to remote desktop into any computer on the network. I don't want to use LogMein, because I only want it to be internal for security. Basically, I am looking for a way to just install VNC clients on all the machines, and on my machine have centralized manager for all the machines that are connected to it. Doesn't have to VNC - just needs to work and be free. All systems running Win 7 64bit

  Read the article

• View old Inbox messages in (OS X) Mail.app via Exchange IMAP?

  - by Jon-Eric

  We're thinking of migrating our Mac users away from Entourage 2008 and instead using Mail.app (built into OS X Snow Leopard). We're running SBS 2003 so it's Exchange 2003 for now. When I setup an "Exchange IMAP" Mail account for a user, their Inbox shows up as empty. However, all of their other folders appear to be populated with their existing email correctly. New email shows up correctly in their Inbox. What do you have to do to see all of the old messages already in the Inbox? Thank you.

  Read the article

• create a CNAME record for AWS LoadBalancer DNS name

  - by t q

  I am trying to setup a loadBalancer on AWS. The A-Record it gave me looks like myLoadBalancer-**********.us-east-1.elb.amazonaws.com however when i try to put that in my domain registrars A-Record, i get an errorIP address is not valid. Must be of type x.x.x.x where x is 0-255. amazons solution is you should create a CNAME record for the LoadBalancer DNS name, or use Amazon Route 53 to create a hosted zone. route 53 gives me DNS numbers but if i use that then my email doesnt work from the registrar. question: is there a way to use route 53 and retain my emails? or should i create a CNAME record for the LoadBalancer DNS name, if so how do i do this ... not sure what this means?

  Read the article

• How can I migrate local users/groups from old Windows 2000 server to new Windows 2003 server?

  - by dmr83457

  On a Windows 2000 box I have setup local users and one group for the purposes of ftp sites for our clients to transfer files to their own site. We are now moving to a different server running Windows 2003. I would like to be able to transfer the users/group and related folders with permissions to the new server without setting them all back up by hand. I see tools available for migrating users to Active Directory but nothing for local to local migration. How should I go about doing this? Is there a capability already built into Windows 2000/2003 for this purpose? Thanks

  Read the article

• Fully Qualified Domain name on Ubuntu Server

  - by Fazal

  I've setup a LAMP server on Ubuntu 10.04 (lucid) and have also installed Virtualmin. This is my first attempt at setting up a server of any sort. I set up one virtual host using Virtualmin and so far so good. Some odd things are happening though, such as when I type in my primary domain into a browser, I see the contents of the virtual server instead of what should be in the default directory. I'm going to use 123.345.789 and example.co.uk instead of my actual ip and domain name's if thats ok. I checked my hostname by using hostname -f and got production1 as my response The contents of my /etc/hosts file is (ip's and domain changed to something generic for this post): 127.0.0.1 localhost localhost.localdomain 123.456.789 production1.example.co.uk 123.456.789 production1 shouldn't my FQD be production1.example.co.uk? How can I go about changing this?, a simple step by step instruction would be great! thanks in advance.

  Read the article

• In DNS can an IN NS point to a CNAME?

  - by embobo

  Is it allowed to have an NS record be a CNAME? E.g.: subdomain.example.com. IN NS ns1.example.com. ns1.example.com. CNAME foo.example.com. foo.example.com. IN A 10.1.1.1 This doesn't seem to work in bind though this (of course) does: subdomain.example.com. IN NS foo.example.com. foo.example.com. IN A 10.1.1.1 Any pointers to RFCs prohibiting this setup would be appreciated.

  Read the article

• Roll standalone JBoss app under Tomcat

  - by Seva Alekseyev

  I've got a Linux box where there’s Tomcat running, with some JSP applications in it. Now, I’ve received a third party app from a developer shop to be eventually deployed. It came as an archive called "jboss7.tar" which, it seems, contained a whole standalone Web server. Once I’ve followed their instructions and run the designated shell script, it would start a server that would listen on port 8081, and app pages are being served up. Still, this strikes me as an inelegant setup. Why run two Web servers side by side, both of them Java-enabled? Also, the manual startup of the standalone app, I don't like that either. The real question is – can I take the user-provided portions from the said archive and somehow plug it under the existing Tomcat instance? It looks like the user code is packaged into files with .war extension, I can see them under /var/jboss7/standalone/deployments.

  Read the article

• DHCP server can't see other machines

  - by William

  Hi, I setup a private network from virtual machines and one of the machines is the DHCP server for the group. I want to specify a next-server for the DHCP server but I'm having trouble connecting to any of the machines that I lease IPs to. I'm just trying to do a simple ping/ssh to 10.0.0.252 (a machine with a lease) but it doesn't seem to respond. Any advice? I'm assuming I need to be able to connect to my next-server but maybe I'm wrong. Thanks.

  Read the article

• Disk controller speed responsible for slow write speeds?

  - by vizvayu

  I have question. I'm using ESXi 4.0U1 in an IBM x3200M2 with an integrated LSI 1064e RAID controller, without any kind of cache. I have 3 250GB HOT-SWAP SATA HDs configured in RAID1E (IME). ESXi works fine, read speed are quite OK, but write speeds are incredible slow, never more than 8MB/s, and this is the best case scenario, benchmarking with iozone streaming writes, using a VMWare Paravirtual controller and with only this VM active, no swapping of any kind (total vm memory reserved). Already wrote to IBM but I don't have any kind of pay support so they didn't even answered, so I'm just wondering... anybody has any experience with a similar setup? I just want to be sure this is hardware related and can't be fixed with some kind of config option, because I'm thinking on buying a new RAID controller (Adaptec 2405 looks nice). Thanks again!

  Read the article

• Missing files when Windows 7 returns from hibernate w/ dual boot

  - by Arthur N

  I have a dual-boot setup with Ubuntu (lucid) and Windows 7. I have the Windows file system shared on Ubuntu through Samba. Occasionally, I am working on Windows and my machine will go into hibernate (i.e. when the battery level is critical). By default, my GRUB settings boot me into Ubuntu. So when I get back to my PC, sometimes I just hop into Ubuntu instead of going back to Windows. However, if I write any files to the Windows file system during that Ubuntu session, the next time I do go back to Windows (which resumes from hibernate), those files are missing. Obviously, the state of the actual file system and the hibernate snapshot become out of sync, and Windows chooses the hibernate snapshot, overriding any changes I may have made thru Ubuntu. For now, I've disabled the hibernate option in the Windows power settings, but is there any utility I can use to get back some of those missing files?

  Read the article

• NVidia raid 5 array spooling sounds and delay

  - by Chase B. Gale

  I've had a raid 5 array setup with 3 2TB WD Green drives for about 3 years now. Starting last week, when I would access the array for the first time, I hear a loud drive spooling sound and experience a ~5 second delay before being able to access\save files. This behavior happens when I don't use the array for some time (about an hour) and after occurring it doesn't happen again if I continue to access the array. I've run SMART scans on all drives and they come back as being a-ok. What's causing this? Is my array getting close to death?

  Read the article

< Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383  | Next Page >