Search Results

Search found 47324 results on 1893 pages for 'end users'.

Page 377/1893 | < Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >

  • Issues with Server 2012 using DFSR running on Hyper-V 2012

    - by Bryan
    We have a number of Server 2012 systems, all of which run virtualised on Hyper-V 2012 server. We are having problems with two such virtual instances, both of which are used as file servers, whereby they occasionally stop responding to requests to serve files to clients. After logging on to the server, attempts to shut it down gracefully fail (no error, it just fails to acknowledge a shutdown request). Recovery is a case of power cycling the server(s) from the Hyper-V console. These two servers don't server a large number of users (one serves no more than 6 users, and the other serves around 20 users), they are in the same domain, but on different physical hardware (and at different sites). They don't lock up at the same time. They both use DFSR to replicate a fairly large amount of data between themselves (200GB) over ADSL connections, this is working fine, and we have been using DFSR to do this on the previous two generations of server OS we have used (Server 2008 R2 and Server 2003 - both of which were physical installs however). Today, when one of the servers crashed, I noticed an entry in the event log, which looked similar to the following: Log Name: Application Source: ESENT Date: 27/11/2012 10:25:55 Event ID: 533 Task Category: General Level: Warning Keywords: Classic User: N/A Computer: HAL-FS-01.example.com Description: DFSRs (1500) \\.\E:\System Volume Information\DFSR\database_C8CC_101_CC00_EC0E\ dfsr.db: A request to write to the file "\\.\E:\System Volume Information\ DFSR\database_C8CC_101_CC00_EC0E\fsr.log" at offset 4423680 (0x0000000000438000) for 4096 (0x00001000) bytes has not completed for 36 second(s). This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem. When the server started up again, I went to find the event log entry to investigate further and found that the event log entry was no longer there (I assume it was in memory but failed to write to disk before the server was powered off, for the reason mentioned in the message). I found the above message by searching back further in the event log. Both of these virtual servers have their E: volumes fully allocated as opposed to dynamically expanding, and there are no other issues on any of the other virtual servers (which include server 2012, server 2008 R2 and Ubuntu 12.04 x64). There are no signs of IO, memory or CPU starvation on the host systems. I've used performance counters on the affected virtual servers to monitor memory usage (including non paged pool usage), as well as CPU and network utilisation, and none of these show any signs of trouble when the issue arises. I would have thought our configuration isn't that uncommon, so I'm wondering if anyone else has seen this, and managed to resolve the problem?

    Read the article

  • Stack , data and address space limits on an Ubuntu server

    - by PaulDaviesC
    I am running an Ubuntu server which has around 5000 users. The users are allowed to SSH in to the system. So in order to cap the memory used up by a process I have capped the address space limits using limits.conf. So my question is , should I be limiting the data and stack ? I feel that is not required since I am capping address space. Are there any pitfalls if I do not cap the stack and data limits?

    Read the article

  • HDFC Bank's Journey to Oracle Private Database Cloud

    - by Nilesh Agrawal
    One of the key takeaways from a recent post by Sushil Kumar is the importance of business initiative that drives the transformational journey from legacy IT to enterprise private cloud. The journey that leads to a agile, self-service and efficient infrastructure with reduced complexity and enables IT to deliver services more closely aligned with business requirements. Nilanjay Bhattacharjee, AVP, IT of HDFC Bank presented a real-world case study based on one such initiative in his Oracle OpenWorld session titled "HDFC BANK Journey into Oracle Database Cloud with EM 12c DBaaS". The case study highlighted in this session is from HDFC Bank’s Lending Business Segment, which comprises roughly 50% of Bank’s top line. Bank’s Lending Business is always under pressure to launch “New Schemes” to compete and stay ahead in this segment and IT has to keep up with this challenging business requirement. Lending related applications are highly dynamic and go through constant changes and every single and minor change in each related application is required to be thoroughly UAT tested certified before they are certified for production rollout. This leads to a constant pressure in IT for rapid provisioning of UAT databases on an ongoing basis to enable faster time to market. Nilanjay joined Sushil Kumar, VP, Product Strategy, Oracle, during the Enterprise Manager general session at Oracle OpenWorld 2012. Let's watch what Nilanjay had to say about their recent Database cloud deployment. “Agility” in launching new business schemes became the key business driver for private database cloud adoption in the Bank. Nilanjay spent an hour discussing it during his session. Let's look at why Database-as-a-Service(DBaaS) model was need of the hour in this case  - Average 3 days to provision UAT Database for Loan Management Application Silo’ed UAT environment with Average 30% utilization Compliance requirement consume UAT testing resources DBA activities leads to $$ paid to SI for provisioning databases manually Overhead in managing configuration drift between production and test environments Rollout impact/delay on new business initiatives The private database cloud implementation progressed through 4 fundamental phases - Standardization, Consolidation, Automation, Optimization of UAT infrastructure. Project scoping was carried out and end users and stakeholders were engaged early on right from planning phase and including all phases of implementation. Standardization and Consolidation phase involved multiple iterations of planning to first standardize on infrastructure, db versions, patch levels, configuration, IT processes etc and with database level consolidation project onto Exadata platform. It was also decided to have existing AIX UAT DB landscape covered and EM 12c DBaaS solution being platform agnostic supported this model well. Automation and Optimization phase provided the necessary Agility, Self-Service and efficiency and this was made possible via EM 12c DBaaS. EM 12c DBaaS Self-Service/SSA Portal was setup with required zones, quotas, service templates, charge plan defined. There were 2 zones implemented - Exadata zone  primarily for UAT and benchmark testing for databases running on Exadata platform and second zone was for AIX setup to cover other databases those running on AIX. Metering and Chargeback/Showback capabilities provided business and IT the framework for cloud optimization and also visibility into cloud usage. More details on UAT cloud implementation, related building blocks and EM 12c DBaaS solution are covered in Nilanjay's OpenWorld session here. Some of the key Benefits achieved from UAT cloud initiative are - New business initiatives can be easily launched due to rapid provisioning of UAT Databases [ ~3 hours ] Drastically cut down $$ on SI for DBA Activities due to Self-Service Effective usage of infrastructure leading to  better ROI Empowering  consumers to provision database using Self-Service Control on project schedule with DB end date aligned to project plan submitted during provisioning Databases provisioned through Self-Service are monitored in EM and auto configured for Alerts and KPI Regulatory requirement of database does not impact existing project in queue This table below shows typical list of activities and tasks involved when a end user requests for a UAT database. EM 12c DBaaS solution helped reduce UAT database provisioning time from roughly 3 days down to 3 hours and this timing also includes provisioning time for database with production scale data (ranging from 250 G to 2 TB of data) - And it's not just about time to provision,  this initiative has enabled an agile, efficient and transparent UAT environment where end users are empowered with real control of cloud resources and IT's role is shifted as enabler of strategic services instead of being administrator of all user requests. The strong collaboration between IT and business community right from planning to implementation to go-live has played the key role in achieving this common goal of enterprise private cloud. Finally, real cloud is here and this cloud is accompanied with rain (business benefits) as well ! For more information, please go to Oracle Enterprise Manager  web page or  follow us at :  Twitter | Facebook | YouTube | Linkedin | Newsletter

    Read the article

  • win2008 r2 IIS7.5 - setting up a custom user for an application pool, and trust issues

    - by Ken Egozi
    Scenario: blank win2008 r2 install the goal was to have a couple of sites running with isolated pool and dedicated users A new folder for a new website - c:\web\siteA\wwwroot, with the app (asp.net) deployed there in the /bin folder created a user named "appuser" and added it to the IIS_USERS group gave the website folder read and execute permissions for IIS_USERS and the appuser created the IIS site. set the app=pool identity to the appuser now I'm getting YSOD telling me that the trust-level is too low - SecurityException: That assembly does not allow partially trusted callers Added <trust level="Full" /> on the web-config, did not help changing the app-pool user to Administrator makes the site run Setting "anonymous user identity" to either IUSR or the app pool identity makes no difference any idea? is there a "step by step" howto guide for setting up users for isolated app pools on IIS7.5?

    Read the article

  • Oracle Insurance Gets Innovative with Insurance Business Intelligence

    - by nicole.bruns(at)oracle.com
    Oracle Insurance announced yesterday the availability of Oracle Insurance Insight 7.0, an insurance-specific data warehouse and business intelligence (BI) system that transforms the traditional approach to BI by involving business users in the creation and maintenance."Rapid access to business intelligence is essential to compete and thrive in today's insurance industry," said Srini Venkatasantham, vice president, Product Strategy, Oracle Insurance. "The adaptive data modeling approach of Oracle Insurance Insight 7.0, combined with the insurance-specific data model, offers global insurance companies a faster, easier way to get the intelligence they need to make better-informed business decisions." New Features in Oracle Insurance 7.0 include:"Adaptive Data Modeling" via the new warehouse palette: Gives business users the power to configure lines of business via an easy-to-use warehouse palette tool. Oracle Insurance Insight then automatically creates data warehouse elements - such as line-specific database structures and extract-transform-load (ETL) processes -speeding up time-to-value for BI initiatives. Out-of-the-box insurance models or create-from-scratch option: Includes pre-built content and interfaces for six Property and Casualty (P&C) lines. Additionally, insurers can use the warehouse palette to deploy any and all P&C or General Insurance lines of business from scratch, helping insurers support operations in any country.Leverages Oracle technologies: In addition to Oracle Business Intelligence Enterprise Edition, the solution includes Oracle Database 11g as well as Oracle Data Integrator Enterprise Edition 11g, which delivers Extract, Load and Transform (E-L-T) architecture and eliminates the need for a separate transformation server. Additionally, the expanded Oracle technology infrastructure enables support for Oracle Exadata. Martina Conlon, a Principal with Novarica's Insurance practice, and author of Business Intelligence in Insurance: Current State, Challenges, and Expectations says, "The need for continued investment by insurers in business intelligence capabilities is widely understood, and the industry is acting. Arming the business intelligence implementation with predefined insurance specific content, and flexible and configurable technology will get these projects up and running faster."Learn moreTo see a demo of the Oracle Insurance Insight system, click hereTo read the press announcement, click here

    Read the article

  • find files where group permissions equal user permissions

    - by Jayen
    Is it possible to do something like find -perm g=u? I say "like" because -perm mode requires mode to specify all the bits, not just g, and because I can't put u on the right side of the =, like I can with the chmod command: you can specify exactly one of the letters ugo: the permissions granted to the user who owns the file (u), the permissions granted to other users who are members of the file's group (g), and the permissions granted to users that are in neither of the two preceding categories (o). At the moment, I'm doing find | xargs -d \\n ls -lartd | egrep '^.(...)\1 which is just ugly. Thanks.

    Read the article

  • How restore qmail backup files

    - by Maysam
    We are using qmail as our mail application on a linux server. A few weeks ago our server crashed and we had everything installed from scratch and our users started to send & receive email again. The problem is they have lost their old emails. We have a back up of the whole qmail directory. But I don't know how to restore the old emails without losing the new ones. It's worth mentioning that I don't have any problem with restoring old sent mails. When I copy email files into .sent-mail/cur directory, I have them restored in sent box of users, but restoring files in /cur directory doesn't work for inbox emails and I can't get them restored.

    Read the article

  • How to prevent ‘Select *’ : The elegant way

    - by Dave Ballantyne
    I’ve been doing a lot of work with the “Microsoft SQL Server 2012 Transact-SQL Language Service” recently, see my post here and article here for more details on its use and some uses. An obvious use is to interrogate sql scripts to enforce our coding standards.  In the SQL world a no-brainer is SELECT *,  all apologies must now be given to Jorge Segarra and his post “How To Prevent SELECT * The Evil Way” as this is a blatant rip-off IMO, the only true way to check for this particular evilness is to parse the SQL as if we were SQL Server itself.  The parser mentioned above is ,pretty much, the best tool for doing this.  So without further ado lets have a look at a powershell script that does exactly that : cls #Load the assembly [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.Management.SqlParser") | Out-Null $ParseOptions = New-Object Microsoft.SqlServer.Management.SqlParser.Parser.ParseOptions $ParseOptions.BatchSeparator = 'GO' #Create the object $Parser = new-object Microsoft.SqlServer.Management.SqlParser.Parser.Scanner($ParseOptions) $SqlArr = Get-Content "C:\scripts\myscript.sql" $Sql = "" foreach($Line in $SqlArr){ $Sql+=$Line $Sql+="`r`n" } $Parser.SetSource($Sql,0) $Token=[Microsoft.SqlServer.Management.SqlParser.Parser.Tokens]::TOKEN_SET $IsEndOfBatch = $false $IsMatched = $false $IsExecAutoParamHelp = $false $Batch = "" $BatchStart =0 $Start=0 $End=0 $State=0 $SelectColumns=@(); $InSelect = $false $InWith = $false; while(($Token = $Parser.GetNext([ref]$State ,[ref]$Start, [ref]$End, [ref]$IsMatched, [ref]$IsExecAutoParamHelp ))-ne [Microsoft.SqlServer.Management.SqlParser.Parser.Tokens]::EOF) { $Str = $Sql.Substring($Start,($End-$Start)+1) try{ ($TokenPrs =[Microsoft.SqlServer.Management.SqlParser.Parser.Tokens]$Token) | Out-Null #Write-Host $TokenPrs if($TokenPrs -eq [Microsoft.SqlServer.Management.SqlParser.Parser.Tokens]::TOKEN_SELECT){ $InSelect =$true $SelectColumns+="" } if($TokenPrs -eq [Microsoft.SqlServer.Management.SqlParser.Parser.Tokens]::TOKEN_FROM){ $InSelect =$false #Write-Host $SelectColumns -BackgroundColor Red foreach($Col in $SelectColumns){ if($Col.EndsWith("*")){ Write-Host "select * is not allowed" exit } } $SelectColumns =@() } }catch{ #$Error $TokenPrs = $null } if($InSelect -and $TokenPrs -ne [Microsoft.SqlServer.Management.SqlParser.Parser.Tokens]::TOKEN_SELECT){ if($Str -eq ","){ $SelectColumns+="" }else{ $SelectColumns[$SelectColumns.Length-1]+=$Str } } } OK, im not going to pretend that its the prettiest of powershell scripts,  but if our parsed script file “C:\Scripts\MyScript.SQL” contains SELECT * then “select * is not allowed” will be written to the host.  So, where can this go wrong ?  It cant ,or at least shouldn’t , go wrong, but it is lacking in functionality.  IMO, Select * should be allowed in CTEs, views and Inline table valued functions at least and as it stands they will be reported upon. Anyway, it is a start and is more reliable that other methods.

    Read the article

  • MSCC: Purpose and benefits of Version Control Systems (VCS)

    Unfortunately, there was no monthly meetup during May. Which means that it was even more important and interesting to go forward with a great topic for this month. Earlier this year I already spoke to Nayar Joolfoo about doing a presentation on version control systems (VCS), and he gladly agreed since then. It was just about finding the right date for the action. Furthermore, it was also a great coincidence that Avinash Meetoo announced on social media networks that Knowledge 7 is about to have a new training on "Effective git" - which correlates to a book title Avinash is currently working on - all the best with your approach on this and reach out to our MSCC craftsmen for recessions. Once again a big Thank you to Orange Ebene Accelerator on providing the venue for us, and the MSCC members involved on securing the time slot for our event. Unfortunately, it's kind of tough to get an early confirmation for our meetups these days. I'll keep you posted on that one as there are some interesting and exciting options coming up soon. Okay, let's talk about the meeting and version control systems again. As usual, I'm going to put my first impression of the meetup: "Absolutely great topic, questions and discussions on version control systems, like git or VSO. I was also highly pleased by the number of first timers and female IT geeks. Hopefully, we will be able to keep this trend for future get-togethers." And I really have to emphasise the amount of fresh blood coming to our gathering. Also, during the initial phase it was surprising to see that exactly those first-timers, most of them students at various campuses here on the island, had absolutely no idea about version control systems. More about further down... Reactions of other attendees If I counted correctly, we had a total of 17 attendees this month, and I'd like to give you feedback from some of them: "Inspiring. Helped me understand more about GIT." -- Sean on event comments "Joined the meetup today with literally no idea what is a version control system. I have several reasons why I should be starting to use VCS as from NOW in my projects. Thanks Nayar, Jochen and other participants :)" -- Yudish on event comments "Was present today and I'm very satisfied.I was not aware if there was a such tool like git available. Thanks to those who contributed for this meetup.It was great. Learned a lot from this meetup!!" -- Leonardo on event comments "Seriously, I can see how it’s going to ease my task and help me save time. Gone are the issues with files backups.  And since I’ll be doing my dissertation this year, using Git would help me a lot for my backups and I’m grateful to Nayar for the great explanation." -- Swan-Iyah on MSCC meetup : Version Controls Hopefully, I'll be able to get some other sources - personal blogs preferred - on our meeting. Geeks, thank you so much for those encouraging comments. It's really great to experience that we, all members of the MSCC, are doing the right thing to get more IT information out, and to help each other to improve and evolve in our professional careers. Our agenda of the day Honestly, we had a bumpy start... First, I was battling a little bit with the movable room divider in order to maximize the space. I mean, we had 24 RSVPs and usually there might additional people coming along. Then, for what ever reason, we were facing power outages - actually twice in short periods. Not too good for the projector after all, but hey it went smooth for the rest of the time being. And last but not least... our first speaker Nayar got stuck somewhere on the road. ;-) Anyway, not a real show-stopper and we used the time until Nayar's arrival to introduce ourselves a little bit. It is always important for me to get to know the "newbies" a little bit, and as a result we had lots of students of university - first year, second year and recent graduates - among them. Surprisingly, none of them was ever in contact with version control systems at all. I mean, this is a shocking discovery! Similar to the ability of touch-typing I'd say that being able to use (and master) any kind of version control system is compulsory in any job in the IT industry. Seriously, I'm wondering what is being taught during the classes on the campus. All of them have to work on semester assessments or final projects, even in small teams of 2-4 people. That's the perfect occasion to get started with VCS. Already in this phase, we had great input from more experienced VCS users, like Sean, Avinash and myself. git - a modern approach to VCS - Nayar What a tour! Nayar gave us the full round of git from start to finish, even touching some more advanced techniques. First, he started to explain about the importance of version control systems as an essential tool for software developers, even working alone on a project, and the ability to have a kind of "time machine" that allows you to inspect and revert to a previous version of source code at any time. Then he showed how easy it is to install git on an Ubuntu based system but also mentioned that git is literally available for any operating system, like Windows, Mac OS X and of course other Linux distributions. Next, he showed us how to set the initial configuration values of user name and email address which simplifies the daily usage of the git client while working with your repositories. Then he initialised and added a new repository for some local development of a blogging software. All commands were done using the command line interface (CLI) so that they can be repeated on any system as reference. The syntax and the procedure is always the same, and Nayar clearly mentioned this to the attendees. Now, having a git repository in place it was about time to work on some "important" changes on the blogging software - just for the sake of demonstrating the ease of use and power of git. One interesting question came very early: "How many commands do we have to learn? It looks quite difficult at the moment" - Well, rest assured that during daily development circles you will need less than 10 git commands on a regular base: git add, commit, push, pull, checkout, and merge And Nayar demo'd all of them. Much to the delight of everyone he also showed gitk which is the git repository browser. It's an UI tool to display changes in a repository or a selected set of commits. This includes visualizing the commit graph, showing information related to each commit, and the files in the trees of each revision. Using gitk to display and browse information of a local git repository And last but not least, we took advantage of the internet connectivity and reached out to various online portals offering git hosting for free. Nayar showed us how to push the local repository into a remote system on github. Showing the web-based git browser and history handling, and then also explained and demo'd on how to connect to existing online repositories in order to get access to either your own source code or other people's open source projects. Next to github, we also spoke about bitbucket and gitlab as potential online platforms for your projects. Have a look at the conditions and details about their free service packages and what you can get additionally as a paying customer. Usually, you already get a lot of services for up to five users for free but there might be other important aspects that might have an impact on your decision. Anyways, moving git-based repositories between systems is a piece of cake, and changing online platforms is possible at any stage of your development. Visual Studio Online (VSO) - Jochen Well, Nayar literally covered all elements of working with git during his session, including the use of external online platforms. So, what would be the advantage of talking about Visual Studio Online (VSO)? First of all, VSO is "just another" online platform for hosting and managing git repositories on remote systems, equivalent to github, bitbucket, or any other web site. At the moment (of writing), Microsoft also provides a free package of up to five users / developers on a git repository but there is more in that package. Of course, it is related to software development on the Windows systems and the bonds are tightened towards the use of Visual Studio but out of experience you are absolutely not restricted to that. Connecting a Linux or Mac OS X machine with a git client or an integrated development environment (IDE) like Eclipse or Xcode works as smooth as expected. So, why should one opt in for VSO? Well, one of the main aspects that I would like to mention here is that VSO integrates the Application Life Cycle Methodology (ALM) of Microsoft in their platform. Meaning that you get agile project management with Backlogs, Sprints, Burn-down charts as well as the ability to track tasks, bug reports and work items next to collaborative team chats. It's the whole package of agile development you'll get. And, something I mentioned briefly during the begin of our meeting, VSO gives you the possibility of an automated continuous integrated (CI) process which builds and can run tests of your source code after each commit of changes. Having a proper CI strategy is also part of the Clean Code Developer practices - on Level Green actually -, and not only simplifies your life as a software developer but also reduces the sources of potential errors. Seamless integration and automated deployment between Microsoft Azure Web Sites and git repository But my favourite feature is the seamless continuous deployment to Microsoft Azure. Especially, while working on web projects it's absolutely astounishing that as soon as you commit your chances it just takes a couple of seconds until your modifications are deployed and available on your Azure-hosted web sites. Upcoming Events and networking Due to the adjusted times, everybody was kind of hungry and we didn't follow up on networking or upcoming events - very unfortunate to my opinion and this will have an impact on future planning of our meetups. Because I rather would like to see more conversations during and at the end of our meetings than everyone just packing their laptops, bags and accessories and rush off to grab some food. I was hoping to get some information regarding this year's Code Challenge - supposedly to be organised during July? Maybe someone could leave a comment on that - but I couldn't get any updates. Well, I'll keep digging... In case that you would like to get more into git and how to use it effectively, please check out Knowledge 7's upcoming course on "Effective git". Thanks Avinash for your vital input into today's conversation and I'm looking forward to get a grip on your book title very soon. My resume of the day Do not work in IT without any kind of version control system! Seriously, without a VCS in place you're doing it wrong. It's like driving a car without seat belts attached or riding your bike without safety helmet. You don't do that! End of discussion. ;-) Nowadays, having access to free (as in cost) tools to install on your machine and numerous online platforms to host your source code for free for up to five users it's a no-brainer to get yourself familiar with VCS. Today's sessions gave a good overview on how to start using git and how to connect to various remote services like github or VSO.

    Read the article

  • MaxClients, Server Limits etc

    - by Moe
    Hello, I'm having some problems with my Server. It's getting quite a bit of traffic and is very slow, and sometimes inaccessible by my users. Here are the server specs: CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz - 16 Processors RAM: 2GB The Values for the Apache Config are: StartServers: 5 MaxSpareServers: 10 MinSpareServers: 5 MaxClients: 150 ServerLimit: 256 MaxRequestsPerChild: 1000 KeepAlive: On KeepAliveTimeout: 5 MaxKeepAliveRequests: 100 TimeOut: 300 What would be optiminal values for a server of my configuration to support the maximum amount of users at a reasonable speed without killing the server! Thank you.

    Read the article

  • How to delete Chrome temp data (history, cookies, cache) using command line

    - by Dio Phung
    On Windows 7, I tried running this script but still cannot clear Chrome temp data. Can someone figure out what's wrong with the script? Where do Chrome store history and cache ? Thanks ECHO -------------------------------------- ECHO **** Clearing Chrome cache taskkill /F /IM "chrome.exe">nul 2>&1 set ChromeDataDir=C:\Users\%USERNAME%\AppData\Local\Google\Chrome\User Data\Default set ChromeCache=%ChromeDataDir%\Cache>nul 2>&1 del /q /s /f "%ChromeCache%\*.*">nul 2>&1 del /q /f "%ChromeDataDir%\*Cookies*.*">nul 2>&1 del /q /f "%ChromeDataDir%\*History*.*">nul 2>&1 set ChromeDataDir=C:\Users\%USERNAME%\Local Settings\Application Data\Google\Chrome\User Data\Default set ChromeCache=%ChromeDataDir%\Cache>nul 2>&1 del /q /s /f "%ChromeCache%\*.*">nul 2>&1 del /q /f "%ChromeDataDir%\*Cookies*.*">nul 2>&1 del /q /f "%ChromeDataDir%\*History*.*">nul 2>&1 ECHO **** Clearing Chrome cache DONE

    Read the article

  • Operator of the week - Assert

    - by Fabiano Amorim
    Well my friends, I was wondering how to help you in a practical way to understand execution plans. So I think I'll talk about the Showplan Operators. Showplan Operators are used by the Query Optimizer (QO) to build the query plan in order to perform a specified operation. A query plan will consist of many physical operators. The Query Optimizer uses a simple language that represents each physical operation by an operator, and each operator is represented in the graphical execution plan by an icon. I'll try to talk about one operator every week, but so as to avoid having to continue to write about these operators for years, I'll mention only of those that are more common: The first being the Assert. The Assert is used to verify a certain condition, it validates a Constraint on every row to ensure that the condition was met. If, for example, our DDL includes a check constraint which specifies only two valid values for a column, the Assert will, for every row, validate the value passed to the column to ensure that input is consistent with the check constraint. Assert  and Check Constraints: Let's see where the SQL Server uses that information in practice. Take the following T-SQL: IF OBJECT_ID('Tab1') IS NOT NULL   DROP TABLE Tab1 GO CREATE TABLE Tab1(ID Integer, Gender CHAR(1))  GO  ALTER TABLE TAB1 ADD CONSTRAINT ck_Gender_M_F CHECK(Gender IN('M','F'))  GO INSERT INTO Tab1(ID, Gender) VALUES(1,'X') GO To the command above the SQL Server has generated the following execution plan: As we can see, the execution plan uses the Assert operator to check that the inserted value doesn't violate the Check Constraint. In this specific case, the Assert applies the rule, 'if the value is different to "F" and different to "M" than return 0 otherwise returns NULL'. The Assert operator is programmed to show an error if the returned value is not NULL; in other words, the returned value is not a "M" or "F". Assert checking Foreign Keys Now let's take a look at an example where the Assert is used to validate a foreign key constraint. Suppose we have this  query: ALTER TABLE Tab1 ADD ID_Genders INT GO  IF OBJECT_ID('Tab2') IS NOT NULL   DROP TABLE Tab2 GO CREATE TABLE Tab2(ID Integer PRIMARY KEY, Gender CHAR(1))  GO  INSERT INTO Tab2(ID, Gender) VALUES(1, 'F') INSERT INTO Tab2(ID, Gender) VALUES(2, 'M') INSERT INTO Tab2(ID, Gender) VALUES(3, 'N') GO  ALTER TABLE Tab1 ADD CONSTRAINT fk_Tab2 FOREIGN KEY (ID_Genders) REFERENCES Tab2(ID) GO  INSERT INTO Tab1(ID, ID_Genders, Gender) VALUES(1, 4, 'X') Let's look at the text execution plan to see what these Assert operators were doing. To see the text execution plan just execute SET SHOWPLAN_TEXT ON before run the insert command. |--Assert(WHERE:(CASE WHEN NOT [Pass1008] AND [Expr1007] IS NULL THEN (0) ELSE NULL END))      |--Nested Loops(Left Semi Join, PASSTHRU:([Tab1].[ID_Genders] IS NULL), OUTER REFERENCES:([Tab1].[ID_Genders]), DEFINE:([Expr1007] = [PROBE VALUE]))           |--Assert(WHERE:(CASE WHEN [Tab1].[Gender]<>'F' AND [Tab1].[Gender]<>'M' THEN (0) ELSE NULL END))           |    |--Clustered Index Insert(OBJECT:([Tab1].[PK]), SET:([Tab1].[ID] = RaiseIfNullInsert([@1]),[Tab1].[ID_Genders] = [@2],[Tab1].[Gender] = [Expr1003]), DEFINE:([Expr1003]=CONVERT_IMPLICIT(char(1),[@3],0)))           |--Clustered Index Seek(OBJECT:([Tab2].[PK]), SEEK:([Tab2].[ID]=[Tab1].[ID_Genders]) ORDERED FORWARD) Here we can see the Assert operator twice, first (looking down to up in the text plan and the right to left in the graphical plan) validating the Check Constraint. The same concept showed above is used, if the exit value is "0" than keep running the query, but if NULL is returned shows an exception. The second Assert is validating the result of the Tab1 and Tab2 join. It is interesting to see the "[Expr1007] IS NULL". To understand that you need to know what this Expr1007 is, look at the Probe Value (green text) in the text plan and you will see that it is the result of the join. If the value passed to the INSERT at the column ID_Gender exists in the table Tab2, then that probe will return the join value; otherwise it will return NULL. So the Assert is checking the value of the search at the Tab2; if the value that is passed to the INSERT is not found  then Assert will show one exception. If the value passed to the column ID_Genders is NULL than the SQL can't show a exception, in that case it returns "0" and keeps running the query. If you run the INSERT above, the SQL will show an exception because of the "X" value, but if you change the "X" to "F" and run again, it will show an exception because of the value "4". If you change the value "4" to NULL, 1, 2 or 3 the insert will be executed without any error. Assert checking a SubQuery: The Assert operator is also used to check one subquery. As we know, one scalar subquery can't validly return more than one value: Sometimes, however, a  mistake happens, and a subquery attempts to return more than one value . Here the Assert comes into play by validating the condition that a scalar subquery returns just one value. Take the following query: INSERT INTO Tab1(ID_TipoSexo, Sexo) VALUES((SELECT ID_TipoSexo FROM Tab1), 'F')    INSERT INTO Tab1(ID_TipoSexo, Sexo) VALUES((SELECT ID_TipoSexo FROM Tab1), 'F')    |--Assert(WHERE:(CASE WHEN NOT [Pass1016] AND [Expr1015] IS NULL THEN (0) ELSE NULL END))        |--Nested Loops(Left Semi Join, PASSTHRU:([tempdb].[dbo].[Tab1].[ID_TipoSexo] IS NULL), OUTER REFERENCES:([tempdb].[dbo].[Tab1].[ID_TipoSexo]), DEFINE:([Expr1015] = [PROBE VALUE]))              |--Assert(WHERE:([Expr1017]))             |    |--Compute Scalar(DEFINE:([Expr1017]=CASE WHEN [tempdb].[dbo].[Tab1].[Sexo]<>'F' AND [tempdb].[dbo].[Tab1].[Sexo]<>'M' THEN (0) ELSE NULL END))              |         |--Clustered Index Insert(OBJECT:([tempdb].[dbo].[Tab1].[PK__Tab1__3214EC277097A3C8]), SET:([tempdb].[dbo].[Tab1].[ID_TipoSexo] = [Expr1008],[tempdb].[dbo].[Tab1].[Sexo] = [Expr1009],[tempdb].[dbo].[Tab1].[ID] = [Expr1003]))              |              |--Top(TOP EXPRESSION:((1)))              |                   |--Compute Scalar(DEFINE:([Expr1008]=[Expr1014], [Expr1009]='F'))              |                        |--Nested Loops(Left Outer Join)              |                             |--Compute Scalar(DEFINE:([Expr1003]=getidentity((1856985942),(2),NULL)))              |                             |    |--Constant Scan              |                             |--Assert(WHERE:(CASE WHEN [Expr1013]>(1) THEN (0) ELSE NULL END))              |                                  |--Stream Aggregate(DEFINE:([Expr1013]=Count(*), [Expr1014]=ANY([tempdb].[dbo].[Tab1].[ID_TipoSexo])))             |                                       |--Clustered Index Scan(OBJECT:([tempdb].[dbo].[Tab1].[PK__Tab1__3214EC277097A3C8]))              |--Clustered Index Seek(OBJECT:([tempdb].[dbo].[Tab2].[PK__Tab2__3214EC27755C58E5]), SEEK:([tempdb].[dbo].[Tab2].[ID]=[tempdb].[dbo].[Tab1].[ID_TipoSexo]) ORDERED FORWARD)  You can see from this text showplan that SQL Server as generated a Stream Aggregate to count how many rows the SubQuery will return, This value is then passed to the Assert which then does its job by checking its validity. Is very interesting to see that  the Query Optimizer is smart enough be able to avoid using assert operators when they are not necessary. For instance: INSERT INTO Tab1(ID_TipoSexo, Sexo) VALUES((SELECT ID_TipoSexo FROM Tab1 WHERE ID = 1), 'F') INSERT INTO Tab1(ID_TipoSexo, Sexo) VALUES((SELECT TOP 1 ID_TipoSexo FROM Tab1), 'F')  For both these INSERTs, the Query Optimiser is smart enough to know that only one row will ever be returned, so there is no need to use the Assert. Well, that's all folks, I see you next week with more "Operators". Cheers, Fabiano

    Read the article

  • Windows CA to issue certificate to authenticate SSH to a Linux server

    - by BArnold
    I have a Windows Server Root Certificate Authority, Linux SSH server, and users with Windows SSH clients. The Linux box is not part of the AD domain (and probably never will be [sigh]) OpenSSH 5.4 and above supports X.509 certiicate based authentication. I am trying to find a way to use my Windows Certificate Authority to issue certificates for authentication of the users when the SSH to the Linux box. I do not want to have to generate a keypair on each user's desktop. And we want the certificates controlled and revokable at the Windows CA. My question is not exactly the same as SSH from Windows to Linux with AD certificates (and the referenced moelinux.net seems to be down) I have searched Google a lot, and haven't found much results about how to accomplish this. An answer doesn't necessarily have to include a full tutorial, even some hints about what to search on or pointers to some references may be helpful.

    Read the article

  • Website Upgrade - Avoid Downtime

    - by nolan.sipos
    I have been requested to investigate how I can reduce the downtime of our website upgrades. We maintain a DNN site with both public facing pages and member only pages. The member only pages are directly linked to our core application database while the public pages are not. Our current process is to redirect website users as soon as the upgrade process begins, which includes Backup of the Prod DB Update Prod DB Update Executables (Application) Upgrade Website Application (If this requires an update) Install Dependencies Upgrade sub systems like communication engine and payment broker Update various configuration files Perform testing of systems Restart all services Allow access to site This process can take from 2 to 8 hours depending on upgrade required, scripts to be run, size of database and number or portals. My initial thoughts are to restrict users to read only pages and any update pages would be unavailable. Could anyone please offer suggestions as to the best practices for what I would think to be a common problem so that we can reduce this down time and if we need infrastructure changes, I can put this to our technical department.

    Read the article

  • Load balancing Apache on a budget?

    - by Industrial
    Hi everyone, I am trying to get my head around the concept of load balancing to ensure availability and redundancy to keep users happy when things go wrong, rather than load balancing for the sake of offering blistering speed to millions of users. We're on a budget and trying to stick to the stuff where there's plenty of knowledge available, so running Apache on Ubuntu VPS's seems like the strategy until some famous search engine acquire us (Saturday irony included, please note). At least to me, it's a complete jungle of different solutions available. Apaches own mod_proxy & HAproxy are two that we found by a quick google search, but having zero experience of load balancing, I have no idea of what would be appropriate for our situation, or what we would look after while choosing a solution to solve our availability concerns. What is the best option for us? What should we do to get availability high whilst staying inside our budgets?

    Read the article

  • Exchange Transport Service Started but not working

    - by Philippe
    Good day, Here is the problem : We are hosting a Microsoft Exchange Server. Everything working fine until recently, where the mail transport seems to go wrong. We almost have to restart the service every morning. The thing is that the transport service is started, but the mail are not delivered to the users and senders to our server get a delayed delivery notification. When we restart the service, all the mail is then delivered to the users and we're good to go for a day or two. Things I've noticed : The store service is growing to around 6 Gb of used RAM, and the w3wp.exe service is hanging around 700mb RAM. Is there a way to schedule a restart of the transport role every 4 hours or something while I'm solving the issue so I don't have to worry when I leave for the week-end? And most of all...does anyone have any idea on how to solve this issue? Thanks, Philippe

    Read the article

  • UX Design Principles Pluralsight course review

    - by pluginbaby
    I've just finished the "Creating User Experiences: Fundamental Design Principles" course on Pluralsight, I am glad I took it, and here is why you should. The course is held by Billy Hollis, an internationally known author and speaker focused on user experience design. It was published in May 2012, so it is quite fresh (You’ll hear some reference to XAML, even if the content is not focused on any particular technology). I think what I liked the most about this course is the fact that Billy is not just imposing design ideas and pushing them in your throat (which would be too confronting for us developers, even if he was right), he spends a fair share amount of time explaining each topics, and illustrate them with great metaphors. If you are a minimum open minded you should get great value out of this course. Billy makes you think outside the box, he encourages you to use your right side brain, and understand design principles by simply looking at what’s around us (physical objects, nature, …). During the course he refers several time to "don't make me think" a book on UX design, which is about giving confidence to users, by making it easier for them to achieve their goals when using your app. Billy thinks that every developer can participate in elaborating good design when building software, not only designers should be involved. Get away of the easy path "let's build functional stuff for now and we will hire a designer later if we have time and budget". The course is also live and interactive as the author suggests that you do some live exercises during each module. He actually makes you realize and understand by yourself the need for change. We’re in a new era of software and devices, where grids and menus aren't enough. You can’t remain satisfied by just making things possible, you need to make them easier for your users. Understanding some fundamental design principles will help. This course can definitely be followed by any developers who wants to improve user experience of software they are working on, and I definitely recommend it.

    Read the article

  • Where in the user profile are the Firefox search engine choices stored?

    - by N Rahl
    We have a large number of user profiles that were created on Ubuntu 10.04 and they had access to Google as a choice in the search bar and Google was the provider for queries typed into the super bar. When logging into these same profiles from Mint 15 client machines, the Google search option does not exist for these users, as is the default for Mint. This setting seems to be user specific, but not a part of the FireFox profile? It seems if it were a part of the FF profile, it would "just work" on Mint for these profiles, so I suspect the configuration may be stored somewhere else in the user's profile? Could someone please tell me where in a user's profile the search engine options are set? We would like to set this once, and then drop this configuration into everyones profile so all of our users don't have to do this manually.

    Read the article

  • VisualSVN Server won't work with AD, will with local accounts

    - by frustrato
    Decided recently to switch VisualSVN from local users to AD users, so we could easily add other employees. I added myself, gave Read/Write privileges across the whole repo, and then tried to log in. Whether I'm using tortoisesvn or the web client, I get a 403 Forbidden error: You don't have permission to access /svn/main/ on this server. I Googled a bit, but only found mention of phantom groups in the authz file. I don't have any of those. Any ideas? It works just fine with local accounts. EDIT: Don't know why I didn't try this earlier, but adding the domain before the username makes it work, ie MAIN/Bob. This normally only works when there are conflicting usernames...one local, one in AD, but for whatever reason it works here too. Kinda silly, but I can live with it.

    Read the article

  • Improving terminal server performance for a specfic app

    - by Matt
    We have a windows 2003 terminal server running 2X application load balancign that is hosting a client's application that is accessed by around 50 users. Each user has there own database. The database is a file based database. The application is developed under Delphi so I think the database may be BDE based. As you can imagine, there is probably quite a lot of disk i/o. Here are some of the perfmon settings. Logged in users (average) 20 - 25 CPU Utilization (average) 80 - 100% Disk Queue Length (average) 1.6 % Disk time (average) 111 Page faults/sec (average) 1400 The application takes on average about a minute to load up. As usual, the budget is tight. Is there basic windows performance tuning tips that people can recommend to improve things before we fork out on more RAM etc. Server is a 2.8GHz Xeon with 3GB of RAM.

    Read the article

  • Site too large to officially use Google Analytics?

    - by Jeff Atwood
    We just got this email from the Google Analytics team: We love that you love our product and use it as much as you do. We have observed however, that a website you are tracking with Google Analytics is sending over 1 million hits per day to Google Analytics servers. This is well above the "5 million pageviews per month per account" limit specified in the Google Analytics Terms of Service. Processing this amount of data multiple times a day takes up valuable resources that enable us to continue to develop the product for all Google Analytics users. Processing this amount of data multiple times a day takes up valuable resources that enable us to continue to develop the product for all Google Analytics users. As such, starting August 23rd, 2010, the metrics in your reports will be updated once a day, as opposed to multiple times during the course of the day. You will continue to receive all the reports and features in Google Analytics as usual. The only change will be that data for a given day will appear the following day. We trust you understand the reasons for this change. I totally respect this decision, and I think it's very generous to not kick us out. But how do we do this the right way -- what's the official, blessed Google way to use Google Analytics if you're a "whale" website with lots of hits per day? Or, are there other analytics services that would be more appropriate for very large websites?

    Read the article

  • [GEEK SCHOOL] Network Security 2: Preventing Disaster with User Account Control

    - by Ciprian Rusen
    In this second lesson in our How-To Geek School about securing the Windows devices in your network, we will talk about User Account Control (UAC). Users encounter this feature each time they need to install desktop applications in Windows, when some applications need administrator permissions in order to work and when they have to change different system settings and files. UAC was introduced in Windows Vista as part of Microsoft’s “Trustworthy Computing” initiative. Basically, UAC is meant to act as a wedge between you and installing applications or making system changes. When you attempt to do either of these actions, UAC will pop up and interrupt you. You may either have to confirm you know what you’re doing, or even enter an administrator password if you don’t have those rights. Some users find UAC annoying and choose to disable it but this very important security feature of Windows (and we strongly caution against doing that). That’s why in this lesson, we will carefully explain what UAC is and everything it does. As you will see, this feature has an important role in keeping Windows safe from all kinds of security problems. In this lesson you will learn which activities may trigger a UAC prompt asking for permissions and how UAC can be set so that it strikes the best balance between usability and security. You will also learn what kind of information you can find in each UAC prompt. Last but not least, you will learn why you should never turn off this feature of Windows. By the time we’re done today, we think you will have a newly found appreciation for UAC, and will be able to find a happy medium between turning it off completely and letting it annoy you to distraction. What is UAC and How Does it Work? UAC or User Account Control is a security feature that helps prevent unauthorized system changes to your Windows computer or device. These changes can be made by users, applications, and sadly, malware (which is the biggest reason why UAC exists in the first place). When an important system change is initiated, Windows displays a UAC prompt asking for your permission to make the change. If you don’t give your approval, the change is not made. In Windows, you will encounter UAC prompts mostly when working with desktop applications that require administrative permissions. For example, in order to install an application, the installer (generally a setup.exe file) asks Windows for administrative permissions. UAC initiates an elevation prompt like the one shown earlier asking you whether it is okay to elevate permissions or not. If you say “Yes”, the installer starts as administrator and it is able to make the necessary system changes in order to install the application correctly. When the installer is closed, its administrator privileges are gone. If you run it again, the UAC prompt is shown again because your previous approval is not remembered. If you say “No”, the installer is not allowed to run and no system changes are made. If a system change is initiated from a user account that is not an administrator, e.g. the Guest account, the UAC prompt will also ask for the administrator password in order to give the necessary permissions. Without this password, the change won’t be made. Which Activities Trigger a UAC Prompt? There are many types of activities that may trigger a UAC prompt: Running a desktop application as an administrator Making changes to settings and files in the Windows and Program Files folders Installing or removing drivers and desktop applications Installing ActiveX controls Changing settings to Windows features like the Windows Firewall, UAC, Windows Update, Windows Defender, and others Adding, modifying, or removing user accounts Configuring Parental Controls in Windows 7 or Family Safety in Windows 8.x Running the Task Scheduler Restoring backed-up system files Viewing or changing the folders and files of another user account Changing the system date and time You will encounter UAC prompts during some or all of these activities, depending on how UAC is set on your Windows device. If this security feature is turned off, any user account or desktop application can make any of these changes without a prompt asking for permissions. In this scenario, the different forms of malware existing on the Internet will also have a higher chance of infecting and taking control of your system. In Windows 8.x operating systems you will never see a UAC prompt when working with apps from the Windows Store. That’s because these apps, by design, are not allowed to modify any system settings or files. You will encounter UAC prompts only when working with desktop programs. What You Can Learn from a UAC Prompt? When you see a UAC prompt on the screen, take time to read the information displayed so that you get a better understanding of what is going on. Each prompt first tells you the name of the program that wants to make system changes to your device, then you can see the verified publisher of that program. Dodgy software tends not to display this information and instead of a real company name, you will see an entry that says “Unknown”. If you have downloaded that program from a less than trustworthy source, then it might be better to select “No” in the UAC prompt. The prompt also shares the origin of the file that’s trying to make these changes. In most cases the file origin is “Hard drive on this computer”. You can learn more by pressing “Show details”. You will see an additional entry named “Program location” where you can see the physical location on your hard drive, for the file that’s trying to perform system changes. Make your choice based on the trust you have in the program you are trying to run and its publisher. If a less-known file from a suspicious location is requesting a UAC prompt, then you should seriously consider pressing “No”. What’s Different About Each UAC Level? Windows 7 and Windows 8.x have four UAC levels: Always notify – when this level is used, you are notified before desktop applications make changes that require administrator permissions or before you or another user account changes Windows settings like the ones mentioned earlier. When the UAC prompt is shown, the desktop is dimmed and you must choose “Yes” or “No” before you can do anything else. This is the most secure and also the most annoying way to set UAC because it triggers the most UAC prompts. Notify me only when programs/apps try to make changes to my computer (default) – Windows uses this as the default for UAC. When this level is used, you are notified before desktop applications make changes that require administrator permissions. If you are making system changes, UAC doesn’t show any prompts and it automatically gives you the necessary permissions for making the changes you desire. When a UAC prompt is shown, the desktop is dimmed and you must choose “Yes” or “No” before you can do anything else. This level is slightly less secure than the previous one because malicious programs can be created for simulating the keystrokes or mouse moves of a user and change system settings for you. If you have a good security solution in place, this scenario should never occur. Notify me only when programs/apps try to make changes to my computer (do not dim my desktop) – this level is different from the previous in in the fact that, when the UAC prompt is shown, the desktop is not dimmed. This decreases the security of your system because different kinds of desktop applications (including malware) might be able to interfere with the UAC prompt and approve changes that you might not want to be performed. Never notify – this level is the equivalent of turning off UAC. When using it, you have no protection against unauthorized system changes. Any desktop application and any user account can make system changes without your permission. How to Configure UAC If you would like to change the UAC level used by Windows, open the Control Panel, then go to “System and Security” and select “Action Center”. On the column on the left you will see an entry that says “Change User Account Control settings”. The “User Account Control Settings” window is now opened. Change the position of the UAC slider to the level you want applied then press “OK”. Depending on how UAC was initially set, you may receive a UAC prompt requiring you to confirm this change. Why You Should Never Turn Off UAC If you want to keep the security of your system at decent levels, you should never turn off UAC. When you disable it, everything and everyone can make system changes without your consent. This makes it easier for all kinds of malware to infect and take control of your system. It doesn’t matter whether you have a security suite or antivirus installed or third-party antivirus, basic common-sense measures like having UAC turned on make a big difference in keeping your devices safe from harm. We have noticed that some users disable UAC prior to setting up their Windows devices and installing third-party software on them. They keep it disabled while installing all the software they will use and enable it when done installing everything, so that they don’t have to deal with so many UAC prompts. Unfortunately this causes problems with some desktop applications. They may fail to work after you enable UAC. This happens because, when UAC is disabled, the virtualization techniques UAC uses for your applications are inactive. This means that certain user settings and files are installed in a different place and when you turn on UAC, applications stop working because they should be placed elsewhere. Therefore, whatever you do, do not turn off UAC completely! Coming up next … In the next lesson you will learn about Windows Defender, what this tool can do in Windows 7 and Windows 8.x, what’s different about it in these operating systems and how it can be used to increase the security of your system.

    Read the article

  • Mark Hurd on Oracle's Strategy to Be the Best

    - by Tuula Fai
    Mark Hurd, President of Oracle, energized a packed audience this Monday morning at OpenWorld with his keynote outlining Oracle’s four-pillar strategy: Be the leader at every level of the technology stack—applications, middleware, database, operating system, virtual machine, servers, and storage Vertically integrate these levels into differentiated solutions Offer Fusion, the next generation of applications, which are modular and can run in the cloud, on-premise, or both (hybrid) Deliver this technology portfolio through industry lenses to help Oracle customers solve their problems while innovating and becoming more efficient. Hurd’s message resonated throughout Monday’s Customer Experience (CX) sessions as we learned about Oracle’s investment in integrating its best-of-breed CX solutions to deliver an end-to-end suite that addresses every part of the customer lifecycle. For example, in the area of customer service, Oracle is developing enhancements to help contact center agents: Better understand customer needs through social listening tools that are integrated with knowledge management Empower themselves with internal collaboration and mobility tools Adapt to customer needs by engaging them through chat during a service or commerce interaction so they can deliver a great customer experience while transforming from a cost- into a profit center.

    Read the article

  • Windows 2003 IIS FTP Server Migration w/ User Accounts

    - by Brad
    I'm trying to figure out the best way to migrate an FTP server from old hardware to new hardware. The server is on a domain, but not all the users setup on the server (to use FTP) are domain accounts, some are local to the server. For example, I have users both ways: domain\username machinename\username The new machine name will be different. So I need to copy all the files with permissions in tact from the old server to the new server. Then I need to convert all the user accounts from the old server to the new server. Then I need to change the file permissions so that they are no longer oldserver\username but newserver\username. Can this be accomplished all with CALCS? Is there an easy way that perhaps I'm missing?

    Read the article

  • Website Content via remote mysql or API for clients

    - by Kannan
    I would like to know whether there will be problem for shared hosting/vps/dedicated users if they request content via remote mysql or via http API. ? What will be issues if they make every request to production server for delivery of the website articles along with image urls etc. Will it cause disk wait on shared/vps/dedicated hosting users ? Will both remotemysql or http api or curl cause high CPU usage, I/O wait or Memory usage ? What should be best for speed remote mysql or http web api ? or any alternatives ? Thanku Kannan

    Read the article

< Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >