Search Results

Search found 12017 results on 481 pages for 'no root'.

Page 377/481 | < Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >

• Synergy, OSX client, Windows 7 server - No mouse on client

  - by Majenko

  I have the following Synergy setup: +------------++------------++------------++------------+ | Mac || Win 7 || Ubuntu 1 || Ubuntu 2 | |c ||s ||c ||c | +------------++------------++------------++------------+ Mac: OS/X Tiger 10.4.11 (G3) Win 7: Windows 7 Ultimate x64 Ubuntu 1 & Ubuntu 2: Desktop 10.10 Now, everything works nicely between the Win7 server and the two Ubuntu machines. What doesn't work is the Mac. I am running the very latest Synergy (1.4.2, downloaded last night). As far as the Mac is concerned everything should be working fine: Synergy 1.4.2 Client on Darwin 8.11.0 Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC Power Macintosh Unable to connect to pasteboard. Clipboard sharing disabled. 2011-03-22 09:32:56.725 synergyc[406] Can't register screen saver connection 'com.apple.ScreenSaverDaemon' started client connecting to '192.168.0.202': 192.168.0.202:24800 connected to server entering screen leaving screen entering screen leaving screen But it's just not interacting with the display at all (mouse doesn't move, keyboard does nothing). I have tried running ktrace on synergyc and examining the dump, and the only clue I found was that it was trying to interact with the AccessibilityAPI which was disabled at first. Enabling Accessibility has had no effect whatsoever (it has only stopped the failure to open /var/db/.AccessibilityAPIEnabled in the ktrace dump) Anyone managed to get this to work in OS/X Tiger yet? I used to run the server on OS/X and have the windows / unix machines as clients, but as my Windows is now a laptop I'd like that to be the server.

  Read the article

• Serving only certain files from a directory to users on IIS7

  - by HarbingTarbl

  I'm have a need to show the most up to date version of a certain file in a directory to users who access a folder on my site (lets call this folder logs). I can't just move the file into the folder as another process relies on being able to find and edit this file while it is running. At first I had thought I could just create a folder on my site, give it the correct permissions and then create a symbolic link to the file. However it seems IIS7 does not follow symlinks. Another solution would be to create a phpscript that pulls the correct file and displays it, but that felt like over-engineering the solution. I know that on Apache this would be simple, but I can't figure out how to do it with IIS7. To give an idea of the folder structure I'm working with. The directory looks like this. Root --File I need to serve. --File containing plain text passwords. --Other folders/files. I can't move any of these files. If I just serve the entire directory using Virtual Directories in IIS I'll also be sharing files and folders containing configuration and other sensitive information.

  Read the article

• SharePoint Search: processing filenames containing underscores

  - by Todd Owen

  We use SharePoint Server 2007 to allow employees to search network file shares, but it seems that underscores in filenames are not treated as word separators when indexing the files. As a result, a search for chocolate will: match "chocolate milkshake.doc" but not match "chocolate_cake.doc" (Of course, this is a simplified example; in practice the content of the second file might include the word "chocolate" and match on that instead of the filename. But the problem itself is real enough, because a common scenario in a corporate environment is that a user knows the the partial name of the file they are looking for and expects to see matching filenames at the top of the search results. And using underscores in filenames is a widely used convention within our company). Underscores are not treated as word separators in the file content either, although this is less of a concern for us. The root cause of this problem is possibly related to the behaviour of the word breakers that SharePoint uses (i.e. the language-specific DLLs that implement the IWorkBreaker interface), although I haven't confirmed this yet. Does anyone know of a workaround for this issue? I have tested with Search Server 2008 Express too (which is based on the same technology), and it is also affected. I do not know whether the problem is fixed in SharePoint 2010 or not.

  Read the article

• OS X Apache giving 503 error for anything in /api directory

  - by WilliamMayor

  I have a locally hosted website that uses Smarty templates, I'm trying to get started on building an API for the site. I've used virtualhost.sh to create a local virtual host for this and other sites. I've discovered that if I put a directory called api at the root of any of these virtual hosts I will get a 503 error when I try to access anything inside. I am using mod-rewrite but so far only to append a .php extension when needed. Here are the error logs for a request: [Thu Feb 09 13:42:37 2012] [error] proxy: HTTP: disabled connection for (localhost) [Thu Feb 09 13:49:06 2012] [error] (61)Connection refused: proxy: HTTP: attempt to connect to [fe80::1]:8080 (localhost) failed [Thu Feb 09 13:49:06 2012] [error] ap_proxy_connect_backend disabling worker for (localhost) The middle line gave me a clue to look in my hosts file because why would a request go to [fe80::1]:8080? I commented out that line and tried again, this time the error was in connecting to the standard 127.0.0.1 localhost. I have concluded that perhaps there is some config file somewhere picking up the underlying request of localhost/api and pointing it somewhere other than my virtual host. At this point my ability to fix the problem fails me. Can anyone help?

  Read the article

• Passenger throwing undefined method `-@' for "master":String after Puppet 3.0.0 upgrade

  - by Andy Shinn

  My Puppet master is using Passenger to serve. After upgrading to Puppet 3.0.0 I am getting the following error: [ pid=17576 thr=70231398486460 file=utils.rb:176 time=2012-10-01 17:37:12.892 ]: *** Exception NoMethodError in PhusionPassenger::Rack::ApplicationSpawner (undefined method `-@' for "master":String) (process 17576, thread #): from config.ru:7 from /usr/lib/ruby/gems/1.8/gems/rack-1.4.1/lib/rack/builder.rb:51:in `instance_eval' from /usr/lib/ruby/gems/1.8/gems/rack-1.4.1/lib/rack/builder.rb:51:in `initialize' from config.ru:1:in `new' from config.ru:1 My config.ru is as follows: # a config.ru, for use with every rack-compatible webserver. # SSL needs to be handled outside this, though. # if puppet is not in your RUBYLIB: # $LOAD_PATH.unshift('/opt/puppet/lib') $0 = "master" # if you want debugging: # ARGV << "--debug" ARGV << "--rack" # Rack applications typically don't start as root. Set --confdir to prevent # reading configuration from ~/.puppet/puppet.conf ARGV << "--confdir" << "/etc/puppet" # NOTE: it's unfortunate that we have to use the "CommandLine" class # here to launch the app, but it contains some initialization logic # (such as triggering the parsing of the config file) that is very # important. We should do something less nasty here when we've # gotten our API and settings initialization logic cleaned up. # # Also note that the "$0 = master" line up near the top here is # the magic that allows the CommandLine class to know that it's # supposed to be running master. # # --cprice 2012-05-22 require 'puppet/util/command_line' # we're usually running inside a Rack::Builder.new {} block, # therefore we need to call run *here*. run Puppet::Util::CommandLine.new.execute Any idea what may be happening?

  Read the article

• Passwordless SSH not working - keys copied and permissions set

  - by Comcar

  I know this question has been asked, but I'm certain I've done what all the other answers suggest. Machine A: used keygen -t rsa to create id_rsa.pub in ~/.ssh/ copied Machine A's id_rsa.pub to Machine B user's home directory Made the file permissions of id_rsa.pub 600 Machine B added Machine A's pub key to authorised_keys and authorised_keys2: cat ~/id_rsa.pub ~/.ssh/authorised_keys2 made the file permissions of id_rsa.pub 600 I've also ensured both the .ssh directories have the permission 700 on both machine A and B. If I try to login to machine B from machine A, I get asked for the password, not the ssh pass phrase. I've got the root users on both machines to talk to each other using password-less ssh, but I can't get a normal user to do it. Do the user names have to be the same on both sides? Or is there some setting else where I've missed. Machine A is a Ubuntu 10.04 virtual machine running inside VirtualBox on a Windows 7 PC, Machine B is a dedicated Ubuntu 9.10 server UPDATE : I've run ssh with the option -vvv, which provides many many lines of output, but this is the last few commands: debug3: check_host_in_hostfile: filename /home/pete/.ssh/known_hosts debug3: check_host_in_hostfile: match line 1 debug1: Host '192.168.1.19' is known and matches the RSA host key. debug1: Found key in /home/pete/.ssh/known_hosts:1 debug2: bits set: 504/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug3: Wrote 16 bytes for a total of 1015 debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug3: Wrote 48 bytes for a total of 1063 debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/pete/.ssh/identity ((nil)) debug2: key: /home/pete/.ssh/id_rsa (0x7ffe1baab9d0) debug2: key: /home/pete/.ssh/id_dsa ((nil)) debug3: Wrote 64 bytes for a total of 1127 debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/pete/.ssh/identity debug3: no such identity: /home/pete/.ssh/identity debug1: Offering public key: /home/pete/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 368 bytes for a total of 1495 debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/pete/.ssh/id_dsa debug3: no such identity: /home/pete/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password

  Read the article

• Emails sent to outlook.com not being delivered

  - by imukcedup

  I'm having an issue that is a little strange. I have a cPanel webserver that I own and have root. I was testing out emailing and noticed some issues. When I send an email to outlook.com address the email sends ok but nothing is recieved at the outlook mailbox. I also dont get an 'email delivery failure notification' in any mailbox. 2014-06-12 09:53:47 SMTP connection from [127.0.0.1]:45334 (TCP/IP connection count = 1) 2014-06-12 09:53:47 1Wv5Rr-0003rA-2K <= [email protected] H=localhost (ourdomain.com) [127.0.0.1]:45334 P=esmtpa A=dovecot_login:joe S=667 [email protected] T="This is a test message" for [email protected] 2014-06-12 09:53:47 SMTP connection from localhost (ourdomain.com) [127.0.0.1]:45334 closed by QUIT 2014-06-12 09:53:50 cwd=/var/spool/MailScanner/incoming/1029481 5 args: /usr/sbin/exim -C /etc/exim_outgoing.conf -Mc 1Wv5Rr-0003rA-2K 2014-06-12 09:53:50 1Wv5Rr-0003rA-2K SMTP connection outbound 1402581230 1Wv5Rr-0003rA-2K ourdomain.com [email protected] 2014-06-12 09:53:50 1Wv5Rr-0003rA-2K => Test Account <[email protected]> R=archive_outgoing_email T=archiver_outgoing 2014-06-12 09:53:52 1Wv5Rr-0003rA-2K => [email protected] R=dkim_lookuphost T=dkim_remote_smtp H=mx1.hotmail.com [65.54.188.110] X=UNKNOWN:AES128-SHA256:128 C="250 <[email protected]> Queued mail for delivery" 2014-06-12 09:53:52 1Wv5Rr-0003rA-2K Completed I have checked the outlook.com's spam folders and its not in there either. This is a new IP address allocation from our ISP and there was a block on gmail addresses, so we know it was used for spam. But with gmail we got a notifaction of failure and I know outlook/microsoft also send out notification. Does anyone know what could be happening here? Thanks

  Read the article

• Can access SSH but can't access cPanel web server

  - by Tom

  I've built a Cent OS 6.0 vps and then i've installed the latest cPanel/WHM. This isn't my first installation but i've noticed something weird especially that i've never used the 6.0 version.. when i tried to install cPanel, it didn't recognize wget so installed it, then cPanel said that Perl isn't installed, i've installed that and the installation went well since then. Now, when i've tried to access the server via the browser with the IP Adress as i've used to, it didn't work, it was just loading forever, i tried the 2087 port, still the same. but SSH works. I've also tried the commands to start the server manually but none of them worked. How to fix that? Edit: iptables -nL Result root@server [~]# iptables -nL Chain INPUT (policy ACCEPT) target prot opt source destination acctboth all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination acctboth all -- 0.0.0.0/0 0.0.0.0/0 Chain acctboth (2 references) target prot opt source destination tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:80 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:80 tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:25 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:25 tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:110 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:110 icmp -- 216.119.149.168 0.0.0.0/0 icmp -- 0.0.0.0/0 216.119.149.168 tcp -- 216.119.149.168 0.0.0.0/0 tcp -- 0.0.0.0/0 216.119.149.168 udp -- 216.119.149.168 0.0.0.0/0 udp -- 0.0.0.0/0 216.119.149.168 all -- 216.119.149.168 0.0.0.0/0 all -- 0.0.0.0/0 216.119.149.168 all -- 0.0.0.0/0 0.0.0.0/0

  Read the article

• "Path Not Found" when attempting to write to a sub folder within a mapped drive

  - by Adam

  We have an interesting issue with one of our server shares, or possibly, our Win 7 desktops. When our users try to save files in a sub folder, either via copy/paste or through an application, to a mapped drive on our DC they receive an error saying "Path not found". They can however browse this folder and open files from it. This is where the "Path Not Found" error doesn't seem to stack up in my opinion. Users can however save files fine in the root folder of the mapped drive, it appears only to affect sub folders. It seems to be random which users and machines this affects. The users can log on to a different machine and be able to save in sub folders fine, on the same mapped drive. Event viewer hasn't been much help either. Currently, the only solution we have found is to image the machines affected which solves the issue. Our servers are Server 2008 R2 with Win 7 Pro desktops. Any help/pointers/suggestions would greatly be appreciated.

  Read the article

• Dedicated server with a lot of storage and good support - and cost-effective

  - by Martin Burger

  Hello, I am from Germany and looking for a dedicated server located in the US with a lot of storage: 750 - 1500 GB. CPU speed and amount of memory are secondary, the server will host large amounts of media files via http and ftp - the basic task is to help people exchange media files. In Germany, there are some good offers, like "Root Server EQ6" at www.hetzner.de. For example, that company provides support of high quality, and their plans are very cost-effective. The plan mentioned above costs about $90 per month and provides two 1500 GB SATA-II HDDs (Software-RAID 1). In the US, I found (amongst others) Go Daddy and rackspace. Go Daddy offers some "Storage Monster" plans that include 2 x 1,000 GB hard drives for about $180 per month - already twice as much as Hetzner above. However, I found some blog and forum entries that complain about the support provided by Go Daddy. Rackspace seems to provide decent support, but they are very "upscale". Their dedicated servers are customizable and start at $419 - thus, about 4.5 times as much as Hetzner. Can anybody recommend a solution / plan that is comparable to the one by Hetzner? Or are prices for dedicated servers in general much higher than in Germany? Regards, Martin

  Read the article

• lxc bandwidth control using tc

  - by kumar

  I am trying to restrict bandwidth inside my containers. I have tried using the following commands , But I think it is not getting effective. cd /sys/fs/cgroup/net_cls/ echo 0x1001 > A/net_cls.classid # 10:1 echo 0x1002 > B/net_cls.classid # 10:2 tc qdisc add dev eth0 root \ handle 10: htb tc class add dev eth0 parent 10: \ classid 10:1 htb rate 40mbit tc class add dev eth0 parent 10: \ classid 10:2 htb rate 30mbit tc filter add dev eth0 parent 10: \ protocol ip prio 10 \ handle 1: cgroup Here A and B are containers created with this command. lxc-execute -n A -f configfile /bin/bash lxc-execute -n B -f configfile /bin/bash Whereas configfile contains only this entry: lxc.utsname = test_lxc AFter starting the container , I have started vsftpd inside container A and try to access the files using the ftp client from another machine. Then I killed vsftpd in container A and started vsftpd in container B and try to access the files using ftp client from another machine. I cannot observe any difference in performance, for that matter it is nowhere nearer to 40mbit/30mbit. Please correct me whether anything wrong here.

  Read the article

• Windows xp recovery console without Ntfs.sys? (0x00000024 BSOD)

  - by Kalle

  I have two physical disks in a computer, for simlicity lets call them C and D. C: got Windows XP and D: got some data. The problem is that whenever i have D: connected i can't boot windows. I get some BSOD called 0x00000024/NTFS_FILE_SYSTEM. Same thing if i boot up windows with D: disconnected and then connect it once windows has loaded. The KB article about this problem says that i have to run chkdsk but i can't get to somewhere where i can run this because i get a BSOD whenever the disk is connected! Even the recovery-console BSODs if D: is connected. The final option in the KB is to boot the computer on Windows 2000 Setup disks where you edit some file to manually disable the ntfs.sys driver and then run chkdsk. The problem is that i don't have any floppy drive. Is there any way to boot the built in recovery console with ntfs.sys disabled or to burn the floppy version to a cd after you've extracted and modified it on the harddrive? Right now the Windows xp bootable floppy creator(2) is asking me which floppy drive to extract to which i can't answer because i have none :/ Other solutions to the root problem is also appreciated :) (2) ht tp://www.microsoft.com/downloads/details.aspx?FamilyID=55820edb-5039-4955-bcb7-4fed408ea73f&displaylang=en

  Read the article

• LSI MegaRAID LINUX got Optimal after degradation but strange POST message

  - by kesrut

  Linux server box with LSI MegaRAID controller got degraded. But after some time RAID status changed to Optimal. Adapter 0 -- Virtual Drive Information: Virtual Drive: 0 (Target Id: 0) Name : RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0 Size : 2.727 TB Mirror Data : 2.727 TB State : Optimal Strip Size : 256 KB Number Of Drives per span:2 Span Depth : 3 Default Cache Policy: WriteBack, ReadAdaptive, Cached, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Cached, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Disk's Default Encryption Type : None Is VD Cached: No But now I'm getting RAID BIOS POST message: Your battery is either charging, bad or missing, and you have VDs configured for write-back mode. Because the battery is not currently usable, these VDs willl actually run in write-through mode until the battery is fully charged or replaced if it is bad or missing. (Image: http://cl.ly/image/1h1O093b1i2d) So may it be battery issue caused problem ? I get information about battery: BatteryType: iBBU Voltage: 4001 mV Current: 0 mA Temperature: 22 C Battery State : Operational BBU Firmware Status: Charging Status : None Voltage : OK Temperature : OK Learn Cycle Requested : No Learn Cycle Active : No Learn Cycle Status : OK Learn Cycle Timeout : No I2c Errors Detected : No Battery Pack Missing : No Battery Replacement required : No Remaining Capacity Low : No Periodic Learn Required : No Transparent Learn : No No space to cache offload : No Pack is about to fail & should be replaced : No Cache Offload premium feature required : No Module microcode update required : No Where can be problem ? I'm disabled alarms, but get them if enabled. But don't know how find root of problem.

  Read the article

• Enabling mod_rewrite on Amazon Linux

  - by L. De Leo

  I'm trying to enable mod_rewrite on an Amazon Linux instance. My Directory directives look like this: <Directory /> Order deny,allow Allow from all Options None AllowOverride None </Directory> <Directory "/var/www/vhosts"> Order allow,deny Allow from all Options None AllowOverride All </Directory> And then further down in httpd.conf I have the LoadModule directive: ... other modules... #LoadModule substitute_module modules/mod_substitute.so LoadModule rewrite_module modules/mod_rewrite.so #LoadModule proxy_module modules/mod_proxy.so ... other modules... I have commented out all the Apache modules not needed by Wordpress. Still when I issue http restart and then check the loaded modules with /usr/sbin/httpd -l I get only: [root@foobar]# /usr/sbin/httpd -l Compiled in modules: core.c prefork.c http_core.c mod_so.c Inside the virtual host containing the Wordpress site I have an .htaccess containing: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress The .htaccess is owned by apache which is the user apache runs under. The apachectl -t command returns Syntax OK What am I doing wrong? What should I check?

  Read the article

• SSL setup: UCC or wildcard certificates?

  - by quanza

  I've scoured the web for a clear and concise answer to my SSL question, but to no avail. So here goes: I have a web-service requiring SSL support for authentication pages. The root-level domain does not have the "www" - i.e., secure://domain.com - but localized pages use "language-code.domain.com", i.e. secure://ja.domain.com So I need at least a wildcard SSL certificate that supports secure://*.domain.com However, we also have a public sandbox environment at sandbox.domain.com, which we also need to support under localized domains - so secure://ja.sandbox.domain.com needs to also work. The previous admin managed to purchase a wildcard SSL certificate for .domain.com, but with a Subject Alternative Name for "domain.com". So, I'm thinking of trying to get a wildcard certificate with SANs defined as "domain.com" and ".*.domain.com". But now I'm getting confused because there seem to be separate SAN certificates, also called UCC certificates. Can someone clarify whether it's possible to get a wildcard certificate with additional SAN fields, and ultimately what the best way is to support: secure://domain.com secure://.domain.com secure://.*.domain.com with the fewest (and cheapest!) number of SSL certificates? Thanks!

  Read the article

• linux mint VIA sound issue

  - by user2699451

  So I installed linux Mint 15 "Olivia" 64 bit on my Mecer W550EU laptop I have HD Audio with a VIA chipset charles-W55xEU charles # lsmod | grep snd snd_hda_codec_hdmi 36913 1 snd_hda_codec_via 51018 1 snd_hda_intel 39619 5 snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 97451 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 19 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device soundcore 12680 1 snd And my sound card charles-W55xEU charles # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: VT1802 Analog [VT1802 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 2: VT1802 HP [VT1802 HP] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 and my audio device charles-W55xEU charles # lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High `Definition Audio Controller (rev 04)` Subsystem: CLEVO/KAPOK Computer Device 0550 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7c10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Sometimes when I boot up, soundworks, other times it doenst, it is completely random, so far, no-one on xchat linux help or linux mint forums was able to help me, I have always had issues with sound on VIA chipsets I have: sudo apt-get upgrade && apt-get install mint-meta-cinnamon it seemed to help but after 2-3 reboots, the problem came back, btw, everytime I checked, pulse audio is selected to Duplex Audio Input & Output and alsa mixer is always unmuted!

  Read the article

• Powershell script to delete sub folders and files if creation date is >7 days but maintain parent folders of sub folders and files <7 days old

  - by Mark

  I'm currently using the Powershell script below to delete all files directories and sub directories of "$dump_path" that are seven days or older based upon the creation date and not modified date. The problem with this script is this: If folder "A" is seven (or more) days old it will be deleted even if its sub folders and files are less then seven days old. What I would like this script to do is this: Delete all files from the root and in all sub folders of "$dump_path" that are seven or more days old but maintain the parent folder(s) of files and folders that are less than seven days old even if that means the parent folders are more than seven days old. If all subfolders and files are seven days or older than the parent folder then the parent can be deleted. Slightly obscure problem I know, but the intention is to have a 7 day retention period of all data in a 'sandbox' location of our shared areas. Also, an added bonus if it could generate a log of what it deletes and e-mails it out post deletion. Thank you for reading and I hope that all makes sense! Mark # set folder path $dump_path = "c:\temp" # set minimum age of files and folders $max_days = "-7" # get the current date $curr_date = Get-Date # determine how far back we go based on current date $del_date = $curr_date.AddDays($max_days) # delete the files and folders Get-ChildItem $dump_path | Where-Object { $_.CreationTime -lt $del_date } | Remove-Item -Recurse

  Read the article

• php5-mysqlnd on debian wheezy/sid?

  - by Joseph

  I am trying to install php5-mysqlnd on a fresh install of Wheezy (/etc/debian_version refers to it as wheezy/sid) and I'm having a problem: root@debian:/var/www/lottery1# apt-get install php5-mysqlnd Reading package lists... Done Building dependency tree Reading state information... Done php5-mysqlnd is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y Setting up php5-mysqlnd (5.4.0-3) ... ucfr: Attempt from package php5-mysqlnd to take /etc/php5/mods-available/mysql.ini away from package php5-mysql ucfr: Aborting. dpkg: error processing php5-mysqlnd (--configure): subprocess installed post-installation script returned error exit status 4 Processing triggers for libapache2-mod-php5 ... configured to not write apport reports Reloading web server config: apache2. Errors were encountered while processing: php5-mysqlnd E: Sub-process /usr/bin/dpkg returned an error code (1) It seems there is some sort of conflict with the php5-mysql package, but I still get this error even after removing (with --purge) the php5-mysql package. Any thoughts? I'm trying to run a web tool that makes heavy use of mysqli_result::fetch_all(). Thanks!

  Read the article

• Usb device not working properly on a Thinkpad T60

  - by Xavierjazz

  I have just started getting a message that a USB device is not working properly. This is on a new Thinkpad T60 running Windows XP Professional SP3. I have had all devices attached for about 10 days or so. When I go to device manager there is no sign of a problem: everything is working correctly. I am unable to find out which device it is. I searched this forum but the only reference I found was to older computers which may not be Usb2 capable. This is not my problem. Any ideas? Thanks. EDIT: I realized I had a harddrive attached but turned off. Although I could not track down any error messages except the balloon that came up, I have disconnected it and, so far, no messages. We'll see over the next day or two, but this may be the problem. Thanks EDIT: This has not solved the problem. I get the message that one of the USB devices has malfunctioned and it points to "USB root hub (2 ports)" and shows an unused port and an unknown device. However, when I check my device manager, it says that there are no problems, everything is working as it should. ?? EDIT: I now found the event log view and there are 2 types of error messages. They do not relate to the time that I get the balloon. 2 of the 3 are "Ati2mtag" errors and the third is "System Control Manager". Are these related to my problem, and the balloon just pops up randomly? EDIT: well, I'm still having the problem, and have narrowed it down to a malfunctioning device. Thanks to all.

  Read the article

• location of index.html CentOS 6

  - by user2118559

  Based on this http://www.servermom.com/how-to-add-new-site-into-your-apache-based-centos-server/454/ tutorial installed Apache-based CentOS Server I use putty.exe as editor vi /etc/httpd/conf/httpd.conf at very bottom modified to <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/fikitipis.com/public_html ServerName www.fikitipis.com ServerAlias fikitipis.com ErrorLog /var/www/fikitipis.com/error.log CustomLog /var/www/fikitipis.com/requests.log common </VirtualHost> So expect that index is at /var/www/fikitipis.com/public_html When in browser type ip address of server, see Apache 2 Test Page powered by CentOS and so on You may now add content to the directory /var/www/html/ Then [root@vps ~]# ls /var/www/ see cgi-bin domain.com error fikitipis.com html icons Checking content of directories ls /var/www/domain.com/public_html, ls /var/www/fikitipis.com/public_html, /var/www/html/ are empty Where is index.html? Did touch /var/www/fikitipis.com/public_html/index1.html then vi /var/www/fikitipis.com/public_html/index1.html, typed a, then wrote some text in file, then Escape and shift+zz. And in browser http://111.111.11.111/index1.html and see what I had wrote. So until now seems that all works

  Read the article

• Disable IPv6 on Debian VPS (Virtuozzo!)

  - by chris_l

  I have a Debian Lenny VPS, that's running virtualized by Parallels/Virtuozzo. Currently, the network interface doesn't have an IPv6 address - and that's good, because I don't have an ip6tables configuration. But I assume, that I could wake up one day, and ifconfig will show me an ipv6 address for the interface - because I have no control over the kernel or its modules - they're under the control of the hosting company. That would leave the server completely vulnerable to attacks from IPv6 addresses. What would be the best way to disable IPv6 (for the interface or maybe for the entire host)? Usually I would simply disable the kernel module, but that's not possible in this case. Update Maybe I should add, that I can use iptables and everything normally (I'm root on the VPS), but I can't make changes to the kernel or load kernel modules because of the way Virtuozzo works (shared kernel). lsmod always returns nothing. I can't call ip6tables -L (it says that I need to insmod, or that the kernel would have to be upgraded). I don't think, that changes to /etc/modprobe.d/aliases would have any effect, or do they? Networking Config? I thought, that maybe I can turn IPv6 off from /etc/network/... Is that possible? I just see, that they've set up avahi, so I should probably change the setting use-ipv6=yes to "no" in /etc/avahi/avahi.conf (?) Has anybody already tried this solution, and can I rely on it? I don't know too much about avahi. Would it actually have any effect? Or could it even bring my entire interface down, once IPv6 is enabled by the kernel?

  Read the article

• VMWare Newbie - looking for hardware recommendations and help :) [closed]

  - by Dan

  I am looking for some hardware recommendations on an upcoming virtualization project. We are a small company (80 users - 25 in site 1, 55 in site 2) currently using Windows Server 2003 - no VM servers yet. Our AD is setup where site 1 is the root domain and site 2 is a subdomain/subnet - connected by T1 and VPN for failover. The current DC's also server as file servers, print servers, AntiVirus servers. Email is in the cloud. Additionally then in site 1 we have 3 additional member servers - one running IBM Websphere for a customer specific app, one running Infor PowerLink (no real heavy load) and another that we use for Virtual Studio apps and also runs DirSync for Exchange Online. No heavy workloads on any of these machines really. We also have an AS400 box that we run ERP/CRM software on that site 2 connects to over the WAN link. In site 2 we also have a SQL machine that runs on Win2K server. Database files are not large less than 5 GB. Light to Medium workload on this machine. File servers in each site store less than 500 GB data and probably won't grow to more than 1TB in the next 5 years. I am looking to go to VMWare in both sites and virtualize all servers. What recommendations do you have for server, storage hardware? Is it safe to virtualize all of your DC's? Any help or advice would be greatly appreciated. Thanks.

  Read the article

• Can't mount FAT32 drive under Ubuntu Linux

  - by Josh

  I have a 320GB USB drive with a single large FAT32 partition. The volume mounts perfectly fine on my Mac OS X 10.5.8 machine and Disk Utility on the mac reports no issues with the volume. I can read/write all data on the drive. However when I connect the drive to my Ubuntu 9.10 Karmic system, the partition does not mount. dmesg|tail says: [ 2752.334822] scsi3 : SCSI emulation for USB Mass Storage devices [ 2752.335040] usb-storage: device found at 3 [ 2752.335044] usb-storage: waiting for device to settle before scanning [ 2757.330301] usb-storage: device scan complete [ 2757.331005] scsi 3:0:0:0: Direct-Access WD 3200AAK External 1.65 PQ: 0 ANSI: 0 [ 2757.331772] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 2757.355647] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2757.360737] sd 3:0:0:0: [sdb] Write Protect is off [ 2757.360749] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 2757.360755] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 2757.367618] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 2757.367631] sdb: sdb1 [ 2762.797622] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 2762.797636] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2822.866228] FAT: bogus number of reserved sectors [ 2822.866237] VFS: Can't find a valid FAT filesystem on dev sdb1. When I run fsck.vfat -a /dev/sdb1 I get: root@cartman:~# fsck.vfat -a /dev/sdb1 dosfsck 3.0.3, 18 May 2009, FAT32, LFN Logical sector size is zero. Googling "vfat Logical sector size is zero" produced no consensus as to the solution. I would prefer not to have to completely reformat the disk if possible because it contains about 280GB of data I would rather not have to find a temporary home for. Any suggestions?

  Read the article

• Sync Two Exchange accounts or Ready Only access to subfolders

  - by cpgascho

  This is two questions kind of. The situation is as follows. I am running SBS 2008 with Exchange 2007. There is a shared account which has subfolders to keep track of the process of jobs that are coming into the company (ie: sales) I need to give other people in the company read access to this mailbox not full control. When I give ready only access to the root other users can only see the Inbox and not subfolders. Permissions have to be applied to each folder. One solution I have considered is creating a secondary mailbox that everyone could have full access too which would have a one way sync from the sales mailbox to the secondary mailbox. Then people could see what was happening without messing up the main mailbox by accident (at worst they would mess up the secondary mailbox) Ideally I could find a way to propgate the READ ONLY Permissiosn to all the subfolders. I have tried using PFDavAdmin to do this but have not been able to get it to connect successfully from Windows 7 To Exchange 2007 Any idea on how to 1. Propogate permissions (get PFDavAdmin to work??!) 2. Sync mailboxes 3. Other solution? Thanks Chris

  Read the article

• What's wrong with this HTTP POST request?

  - by bigboy

  I'm trying to fuzz a server using the Sulley fuzzing framework. I observe the following stream in Wireshark. The error talks about a problem with JSON parsing, however, when I try the same HTTP POST request using Google Chrome's Postman extension, it succeeds. Can anyone please explain what could be wrong about this HTTP POST request? The JSON seems valid. POST /restconf/config HTTP/1.1 Host: 127.0.0.1:8080 Accept: */* Content-Type: application/yang.data+json { "toaster:toaster" : { "toaster:toasterManufacturer" : "Geqq", "toaster:toasterModelNumber" : "asaxc", "toaster:toasterStatus" : "_." }} HTTP/1.1 400 Bad Request Server: Apache-Coyote/1.1 Content-Type: */* Transfer-Encoding: chunked Date: Sat, 07 Jun 2014 05:26:35 GMT Connection: close 152 <?xml version="1.0" encoding="UTF-8" standalone="no"?> <errors xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf"> <error> <error-type>protocol</error-type> <error-tag>malformed-message</error-tag> <error-message>Error parsing input: Root element of Json has to be Object</error-message> </error> </errors> 0

  Read the article

< Previous Page | 373 374 375 376 377 378 379 380 381 382 383 384  | Next Page >