Search Results

Search found 12017 results on 481 pages for 'no root'.

Page 379/481 | < Previous Page | 375 376 377 378 379 380 381 382 383 384 385 386  | Next Page >

• Ubuntu 13.04 to 13.10: Filesystem check or mount failed [migrated]

  - by SamHuckaby

  I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

  Read the article

• Cannot start MySQL

  - by Mohamed Nour El-Din

  I used this command from shell to repair all Databases mysqlcheck -u root -p --auto-repair --check --optimize --all-databases and after that I restarted the server when it came back alive again I tried to open my vBulletin forum but I recived Database error message. and also tried to open phpMyAdmin but I received this error : #2002 - The server is not responding (or the local MySQL server's socket is not correctly configured). I checked the services list and found that the MySQL Service is not listed, so I tried to start it from shell I receive this error : Starting MySQL.Manager of pid-file quit without updating fi[FAILED] could anyone help me in that ? thanks in advance. update I found these lines in the log file 101101 01:36:01 mysqld started 101101 1:36:01 [Warning] Asked for 196608 thread stack, but got 126976 101101 1:36:01 [ERROR] /usr/sbin/mysqld: Table './mysql/user' is marked as crashed and last (automatic?) repair failed 101101 1:36:01 [ERROR] /usr/sbin/mysqld: Table './mysql/user' is marked as crashed and last (automatic?) repair failed 101101 1:36:01 [ERROR] Fatal error: Can't open and lock privilege tables: Table './mysql/user' is marked as crashed and last (automatic?) repair failed 101101 01:36:01 mysqld ended What should I do then ?

  Read the article

• Nvidia Linux Driver Huge Resolution

  - by darxsys

  I'm trying to setup a working CUDA SDK on my Linux Mint. I'm new to Linux and everything connected with it. So, I tried following some steps on how to install CUDA. Firstly, I downloaded a Linux driver from here: http://developer.nvidia.com/cuda/cuda-downloads version 295.41. After that, I barely found a way to run it. I did it like this: 1. typed in sudo init 1 in terminal and switched to root 2. typed service mdm stop 3. ran the *.run file downloaded from the link above Then it started installing the driver. It gave some warning messages, but I ignored it. After installation, I typed init 5 and it came back to GUI screen, BUT everything is huge. I restarted, still huge. My screen resolution is 640x480 on a 17 inch laptop monitor. I tried running Nvidia X Server Settings, but it says: "You do not appear to be using Nvidia X Driver. Please edit your X configuration file." I tried that. Nothing happened. I cant change the resolution because that Nvidia Settings thing gives no options. Then I googled some things, installing some packages - nothing. The biggest problem is I don't understand whats really going on. My laptop is a Samsung with i7 and Nvidia Gt 650M with optimus. I cant even install bumblebee, but that is something I will try if I manage to get my resolution to default. Please, help!

  Read the article

• Uninstall Perl 5.10 and Install 5.8 on Ubuntu 10.04

  - by user48848

  I was using Ubuntu 8.04 with installed Perl 5.8.8. I had installed Bugzilla 3.4.4 with some custom scripts and it was working fine. I had to upgrade Ubuntu from 8.04 to 10.04 and automatically Perl is also upgraded from Perl 5.8 to 5.10. Now, accessing Bugzilla displays an error message related to Perl module. While trying to run checksetup.pl, I am getting the following error message: root@cvsnew:/var/www/bugzilla-3.4# perl checksetup.pl * This is Bugzilla 3.4.3 on perl 5.10.1 * Running on Linux 2.6.32-24-generic-pae #39-Ubuntu SMP Wed Jul 28 07:39:26 UTC 2010 Checking perl modules... Checking for CGI.pm (v3.33) ok: found v3.48 perl: symbol lookup error: lib/i486-linux-gnu-thread-multi/auto/Digest/SHA/SHA.so: undefined symbol: Perl_Tstack_sp_ptr Accessing Bugzilla throws : "500 Internal Server Error". I explored this issue and found that this issue has come up because upgrading Ubuntu upgrades Perl 5.8 to 5.10 automatically. It seems like Perl 5.10.1 isn't binary compatible with the previous. Now, I want to uninstall Perl 5.10.1 and Install Perl 5.8.8 on my Ubuntu 10.04 box. I will appreciate if someone has already done that or share the required steps/commands to do it.

  Read the article

• setting up subdomain wildcard: configured A record, VirtualHost... still does not work

  - by user80314

  Running Apache on CentOS, trying to setup wildcard subdomains, basically I want .mydomain.com to point to mydomain.com With cPanel I added *.mydomain.com With WHM I made sure that A record is pointing to the right IP. I set my A record: * 14400 IN X.x.x.x My httpd.conf: ServerName _wildcard_.mydomain.com ServerAlias *.mydomain.com DocumentRoot /home/mydomain/public_html ServerAdmin [email protected] UseCanonicalName Off ## User userdomain# Needed for Cpanel::ApacheConf UserDir enabled userdomain <IfModule mod_suphp.c> suPHP_UserGroup userdomain userdomain </IfModule> <IfModule !mod_disable_suexec.c> <IfModule !mod_ruid2.c> SuexecUserGroup usergrdomain userdomain </IfModule> </IfModule> <IfModule mod_ruid2.c> RUidGid userdomain userdomain </IfModule> ScriptAlias /cgi-bin/ /home/mydomain/public_html/cgi-bin/ # To customize this VirtualHost use an include file at the following location # Include "/usr/local/apache/conf/userdata/std/2/mydomain/wildcard_safe.mydomain.com/*.conf" I have my VirtualHost in httpd.conf set to point to domain root. Restarted Apache, server, dns, still nothing. I have spent hours researching this, followed instructions, set everything correctly. What am I missing?

  Read the article

• I accidentally hijacked my localhost

  - by Zach L

  Opening localhost in the browser is pointing a local webpage (examplePage) after playing with some config files a while back, and I can't figure out how to restore the default behavior. Background: I have XAMPP installed on my Windows 7 machine, and a webpage at c:/xampp/htdocs/examplePage. A couple weeks ago, I was on a mission to get sites root-relative urls (/resource) to work, so I played around with a bunch of apache/conf files, including httpd.conf and httpd-vhosts.conf and also was messing with the Windows hosts file. I gave up at some point, didn't document exactly what I did, and have since probably forgotten some of what I did. Many of my changes stemmed from suggestions in this StackOverflow post What I've Tried I commented out my additions to the hosts file I turned off XAMPP (thus hopefully negating any apache config file effect) I reverted to my original DocumentRoot in httpd.conf anyway (xampp/htdocs) localhost still displays examplePage. Even with xampp turned on (my reverted DocmentRootisn't taking effect) Does anyone know what I may have done and how I can fix it? Update : Its been resolved, thank everyone so much in taskmanager, theres a couple instances of httpd.exe (Apache HTTP Server). I ended these, and opened XAMPP, restarting apache. all references to examplePage in my .conf files that I could find had been commented out or removed. I imagine that the old versions were still in effect for some reason, and manually ending the Apache processes fixed this. As a point of interest, Its still a mystery why those processes were running - I cannot reproduce that situation. I must've stumbled upon a XAMPP bug of some sort.

  Read the article

• Ubuntu: unattended-upgrades from a local package archive

  - by Novelocrat

  I have a local apt archive with a bunch of packages I built in it. The Packages and Release file are generated by apt-ftparchive. The Release file looks like Date: Thu, 06 May 2010 23:04:33 UTC Label: PPL Origin: PPL Suite: ppl MD5Sum: ebec3527ebc8351468b2ef8796c19855 37325 Packages d41d8cd98f00b204e9800998ecf8427e 0 Release SHA1: a0593b663d77fde88ee35b56ae1f3c17801cfe99 37325 Packages da39a3ee5e6b4b0d3255bfef95601890afd80709 0 Release SHA256: dd73a02846aee111cac58a869c6bf650886632ba82c2172ffddd81aa4429981c 37325 Packages e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 0 Release I'm using unattended-upgrades to keep the machines in the lab up to date on security and bug fixes, but I'm finding that it doesn't pull from my local archive. The configuration file for it looks like // Automaticall upgrade packages from these (origin, archive) pairs Unattended-Upgrade::Allowed-Origins { "Ubuntu hardy-security"; "Ubuntu hardy-updates"; "PPL ppl"; }; // List of packages to not update Unattended-Upgrade::Package-Blacklist { // "vim"; // "libc6"; // "libc6-dev"; // "libc6-i686"; }; // Send email to this address for problems or packages upgrades // If empty or unset then no email is sent, make sure that you // have a working mail setup on your system. The package 'mailx' // must be installed or anything that provides /usr/bin/mail. //Unattended-Upgrade::Mail "root@localhost"; Yet, when I run sudo unattended-upgrade on one of these machines, newer package versions don't get installed. Can anyone point out what I'm getting wrong?

  Read the article

• OpenBSD logins via SSH seem to be ignoring my configured radius server

  - by Steve Kemp

  I've installed and configured a radius server upon my localhost - it is delegating auth to a remote LDAP server. Initially things look good: I can test via the console: # export user=skemp # export pass=xxx # radtest $user $pass localhost 1812 $secret Sending Access-Request of id 185 to 127.0.0.1 port 1812 User-Name = "skemp" User-Password = "xxx" NAS-IP-Address = 192.168.1.168 NAS-Port = 1812 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=185, Similarly I can use the login tool to do the same thing: bash-4.0# /usr/libexec/auth/login_radius -d -s login $user radius Password: $pass authorize However remote logins via SSH are failing, and so are invokations of "login" started by root. Looking at /var/log/radiusd.log I see no actual log of success/failure which I do see when using either of the previous tools. Instead sshd is just logging: sshd[23938]: Failed publickey for skemp from 192.168.1.9 sshd[23938]: Failed keyboard-interactive for skemp from 192.168.1.9 port 36259 ssh2 sshd[23938]: Failed password for skemp from 192.168.1.9 port 36259 ssh2 In /etc/login.conf I have this: # Default allowed authentication styles auth-defaults:auth=radius: ... radius:\ :auth=radius:\ :radius-server=localhost:\ :radius-port=1812:\ :radius-timeout=1:\ :radius-retries=5:

  Read the article

• pgpoolAdmin keeps going straight back to it's login page

  - by user705142

  I'm trying to run pgpoolAdmin through nginx - it seems to be working properly, at least initially. I've gone through the initial set-up, which works fine, but now after logging in every link takes me straight back to the login page. It also shows japanese text instead of english, despite picking english in the installation. It seems to me just as if it was unable to save any user data, session information etc. I have javascript/cookies enabled, so it's not that. The ownership of the folder is nginx, and so too is pgmgt.conf.php, so it shouldn't be a problem with permissions. One potential issue is that I can't seem to see any confirmation that php postgresql support is enabled in the php info screen, despite the correct package installed and in the config line. Any ideas as to what's happening here? The nginx rules are pretty standard: server { # pg-pool admin listen 997; server_name localhost; root /opt/pgpooladmin; index index.php; location ~ .php$ { fastcgi_pass_header Set-Cookie; fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_index index.php; include fastcgi_params; } }

  Read the article

• Nginx multiple upstream servers on the same domain via diferent url

  - by Barry

  Hello. I am trying to rout trafic to different upstream servers (that serve different applications and not for load balancing). The incoming trafic has the same domain name but different URL. Here is an example of my configuration: http { upstream backend1 { server 127.0.0.1:8080 fail_timeout=0; server 127.0.0.1:8081 fail_timeout=0; } upstream backend2 { server 127.0.0.1:8090 fail_timeout=0; server 127.0.0.1:8091 fail_timeout=0; } server { listen 80; server_name my_server.com; root /home/my_server; location /serve_me { fastcgi_pass backend1; include fastcgi_params; } location / { fastcgi_pass backend2; include fastcgi_params; } } } It seems that whatever trafic comes in (including "my_server.com/serve_me") goes to backend2. How do I make queries that start with /serve_me to be directed to backend1? Thanks, Barry.

  Read the article

• debian VM refusing all traffic apart from http

  - by james lewis

  I've got a VM with a fresh install of Debian (wheezy) and I've installed node and mongo on it. The VM is using a bridged network connection so I was expecting to be able to point my host machines browser at the ip address of the Debian VM (port 1337 for my node example or port 28017 for my mongo status page) and see one of the two services (node or mongo). My requests are refused though. As far as I can tell Debian allows all traffic by default and you have to manually configure iptables to drop traffic. I've checked iptables and it says it's setup to allow anything through. It looks like this: root@devbox:/home/jlewis# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination As a test I setup nginx and I was able to get to the nginx landing page from my host no problems so obviously http traffic is allowed. I then set nginx up to forward all traffic upstream to mongo - no problems there, I was able to see the status page. I then did the same for my example node server and again, no problems. So http traffic is fine, but all other traffic is blocked. Anyone know why debian might be refusing all other traffic other than iptables being setup to drop it? EDIT - output from netstat -nltp: Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:28017 0.0.0.0:* LISTEN 1762/mongod tcp 0 0 0.0.0.0:51028 0.0.0.0:* LISTEN 1541/rpc.statd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2462/sshd tcp 0 0 127.0.0.1:1337 0.0.0.0:* LISTEN 2794/node tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 2274/exim4 tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 1762/mongod tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1510/rpcbind tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 2189/nginx tcp6 0 0 :::22 :::* LISTEN 2462/sshd tcp6 0 0 :::45335 :::* LISTEN 1541/rpc.statd tcp6 0 0 ::1:25 :::* LISTEN 2274/exim4 tcp6 0 0 :::111 :::* LISTEN 1510/rpcbind

  Read the article

• Deploying concrete5 on nginx

  - by Nithin

  I have a concrete5 site that works 'out of the box' in apache server. However I am having a lot of trouble running it in nginx. The following is the nginx configuration i am using: server { root /home/test/public; index index.php; access_log /home/test/logs/access.log; error_log /home/test/logs/error.log; location / { # First attempt to serve request as file, then # as directory, then fall back to index.html try_files $uri $uri/ index.php; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } # pass the PHP scripts to FastCGI server listening on unix socket # location ~ \.php($|/) { fastcgi_pass unix:/tmp/phpfpm.sock; fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_path_info; include fastcgi_params; } location ~ /\.ht { deny all; } } I am able to get the homepage but am having problem with the inner pages. The inner pages display an "Access denied". Possibly the rewrite is not working, in effect I think its querying and trying to execute php files directly instead of going through the concrete dispatcher. I am totally lost here. Thank you for your help, in advance.

  Read the article

• Limiting access in Silverlight\Pivotviewer

  - by sparaflAsh

  I'm going to deploy a pivotviewer application. As some of you might know this silverlight application load a .cxml index file for a group of images. My need is to make .cxml file and image files not accessible for the user. Now, if I don't have a need I usually code like this in C# and the file is hosted in the documentroot: _cxml = new CxmlCollectionSource(new Uri("http://www.myurl.it/Collection.cxml", UriKind.Absolute)); This means that my cxml and then the images are available by http for everyone who knows the URI. I'm a newbie to server configuration, so any help/hint would be deeply appreciated. Someone suggested me to take the files out of the root, but it seems like I can't go to pick them up if they are not a URL in Silverlight. At least I didn't managed to understand how. Someone else suggested me to play with web.config file to hide URLs, but I don't really know where to start. My question is, what's the best practice to hide my stuff? Obviously I can edit the question if you need more details.

  Read the article

• RemoteApp shows no certificate available but RD Session host finds it fine

  - by Scott Chamberlain

  I am trying to set up remote app for a internal domain. I have a Root CA that is trusted my all of the end computers, that cert has signed a wildcard cert I am trying to use for the server. I added the pfx of the wildcard cert to the local machine personal store. From there I can use it fine for signing the RD Session Host session. However when I try to set up the signature for Remote App the certificate does not show up. What do I need to do to get my certificate to be available for for use? UPDATE: The Certificate was generated through the following commands: makecert -pe -n "CN=*.vw.local" -a sha1 -sky signature -ic VetWebCA.cer -iv VetWebCA.pvk -sv VetWebComputerWildcard.pvk VetWebComputerWildcard.cer pvk2pfx -pvk VetWebComputerWildcard.pvk -spc VetWebComputerWildcard.cer -pfx VetWebComputerWildcard.pfx The resultant pfx was added to the machine local store via mmc. Oddly, going in to Powershell if I add the -CodeSigningCert flag to find the wildcard certificate it is excluded from the serch results for Get-Childitem in my Cert:\Local Machine\My path, but if I don't include it it is there.

  Read the article

• Win2k8R2 / IIS 7.5 - users getting 503 response, no 503 error reported in logs

  - by merk

  I've got 2 web servers with mirrored content. There's a load balancer sitting in front of them. Starting yesterday we've been getting people complaining about 503 errors. i can't find any 503 errors in the IIS log file. However the server host is saying these errors are due to .Net errors in our website which are causing the app pool to recycle. They pointed out several errors in the windows application event log which look like this: Log Name: Application Source: ASP.NET 4.0.30319.0 Date: 3/31/2012 8:35:37 PM Event ID: 1309 Task Category: Web Event Level: Warning Keywords: Classic User: N/A Computer: 6251.local Description: Event code: 3005 Event message: An unhandled exception has occurred. Event time: 3/31/2012 8:35:37 PM Event time (UTC): 4/1/2012 1:35:37 AM Event ID: e7a580c7b38545cca3416a8595408f24 Event sequence: 97 Event occurrence: 1 Event detail code: 0 Application information: Application domain: /LM/W3SVC/2/ROOT-1-129777167518960645 Trust level: Full Application Virtual Path: / Application Path: C:\inetpub\wwwroot\mywebsite\ Machine name: 6252 Process information: Process ID: 20000 Process name: w3wp.exe Account name: IIS APPPOOL\MyAppPool In particular they are saying that the account name under Process Information indicates that the app pool is recycling. They said if the app pool were not recycle, the accountname would instead be the folder where the website files are located. I checked the app pool settings - it's set to recycle every 29 hours. And the rapid fail protection is set to the default of 5 failures in 5 minutes. But i have not seen 5 failures in the event log in that short of a time span. Can anyone help me confirm if the 503 responses are indeed being generated by the app pools recycling? Or are these errors coming from somewhere else? My guess at the time was their load balancer was the one actually returning the 503 error. But that was just a guess.

  Read the article

• Getting 502 instead of 503 when all backend servers are down running HAProxy behind Apache

  - by scarba05

  I'm testing running HAProxy as a dedicated load balancer behind Apache 2.2, replacing our current configuration where we use Apache's load balancer. In our current, Apache only, set-up if all the backend (origin) servers are down Apache will serve a 503 service unavailable message. With HAProxy I get a 502 bad gateway response. I'm using a simple reverse proxy rewrite rule in Apache RewriteRule ^/(.*) http://127.0.0.1:8000/$1 [last,proxy] In HAProxy I have the following (running in default tcp mode) defaults log global option tcp-smart-accept timeout connect 7s timeout client 60s timeout queue 120s timeout server 60s listen my_server 127.0.0.1:8000 balance leastconn server backend1 127.0.0.1:8001 check observe layer4 maxconn 2 server backend1 127.0.0.1:8001 check observe layer4 maxconn 2 Testing connecting directly to the load balancer when the backend servers are down: [root@dev ~]# wget http://127.0.0.1:8000/ test.html --2012-05-28 11:45:28-- http://127.0.0.1:8000/ Connecting to 127.0.0.1:8000... connected. HTTP request sent, awaiting response... No data received. So presumably this is down to the fact that HAProxy accepts the connection and then closes it.

  Read the article

• Error in Apache: /var/run/apache2 not found

  - by Julen

  This is more self-answered question but since it drove me crazy I would like to share with the community and maybe someone can tell me why it happened or what it caused. The thing is I wanted to install in my Ubuntu 10.4 machine a CGI app, one built in the samples that come with the gSOAP toolkit. My intention was to access those from ASP .NET machine. Regular Ubuntu does not come with Apache so I install it from Sypnatic. Pretty easy. I followed this How to Install Apache2 webserver with PHP,CGI and Perl Support in Ubuntu Server. Instead of apache.conf I tweaked httpd.conf since a college here used that file instead of the first to put his Apache running. Besides I was able to access his CGI from my ASP .NET but mysteriously I could not from mine, I was getting always "The request failed with HTTP status 503: Service Temporarily Unavailable". Checking Apache error.log I found these messages: No such file or directory: unable to connect to cgi daemon after multiple tries: /home/julen/htdocs/cgi-bin/calcserver And looking more carefully whenever I restarted Apache I got this other message No such file or directory: Couldn't bind unix domain socket /var/run/apache2/cgisock. cgid daemon failed to initialize I am pretty new with Ubuntu and I could not think that Apache and Synaptic made a mistake in the installation process of the server, but it is true that the /var/run/apache2 was missing whereas in my college's computer was not. I tried to find and "elegant" solution but I found a post from 2006 that had an slight reference to it. Finally I decided to create the folder myself (as root) and then everything worked fine. Hope this helps others if they encounter a similar problem. Still I have the doubt why the folders was not created in the first place. Best, Julen.

  Read the article

• Apache Process question about RAM usage

  - by Andrew Fashion

  So everytime I load a new page, I notice a new HTTPD process opens, every time I click a page, and each process says it's using anywhere from 2-4.5% of memory. Does that mean every single process is running at that time using 2-4% of RAM? It's a brand new server and I'm the only one on the server at the moment. Or does it mean all the other processes are dying, and only the new one is active. Because 4% of my 2048MB of RAM is already 82MB for just one process!?!? Let me know, because I am trying to determine what I need to beef my server up in order to handle high loads of traffic. I'm expect to get 20,000 uniques per day on launch. I am currently running a Dual Quad Xeon server, with only 2GB of ram, I will upgrade to 8GB or more shortly. Let me know what you suggest! thank you [root@D18634 log]# top | grep 'httpd' 11315 apache 15 0 362m 82m 24m R 12.3 4.1 0:03.00 httpd 11310 apache 16 0 322m 41m 21m S 5.7 2.1 0:02.98 httpd 11315 apache 15 0 362m 83m 25m S 24.3 4.1 0:03.73 httpd 11319 apache 16 0 324m 42m 20m R 1.0 2.1 0:01.85 httpd 11319 apache 16 0 362m 82m 23m R 78.5 4.1 0:04.21 httpd 11321 apache 16 0 323m 44m 23m S 35.3 2.2 0:04.13 httpd 11319 apache 15 0 361m 82m 23m S 8.3 4.1 0:04.46 httpd 11321 apache 15 0 323m 44m 23m S 35.9 2.2 0:05.21 httpd 11313 apache 15 0 324m 41m 19m S 48.6 2.1 0:03.23 httpd 11322 apache 16 0 354m 72m 20m R 11.0 3.6 0:05.11 httpd 11322 apache 16 0 354m 72m 20m S 23.9 3.6 0:05.83 httpd 11314 apache 16 0 355m 75m 22m R 18.3 3.7 0:04.64 httpd

  Read the article

• Network driver for Hyper-V restore from Windows Home Server

  - by Philipp Schmid

  I have backed up Windows Server 2008 running virtualized on Hyper-V to a Windows Home Server 2008 SP1 (I know I should have backed up the VHD instead). Now I need to restore the contents of the VM from WHS. I have created a restore CD ISO and used it to create a new VM. It all works as advertised up to the point where the restore process wants to load the network drivers (it only finds 4 disk drivers on the restore CD. but no network drivers). So I created a virtual floppy and copied the contents of 'Home Server Drivers for Restore onto it. But no luck! I have tried moving the 4 subdirectories into the root of the floppy, but that didn't work either. Finally, I started another instance of the WS 2008 to identify the network driver that the virtualized instance is using (%WINDOWS%\system32\drivers\netvsc60.sys) and copied that file onto the virtual floppy, without success. Does anyone have any suggestions on how to get networking working on a Hyper-V instance running off the Windows Home Server Restore CD? UPDATE: As suggested by delenda, I have added a legacy network adapter to my VM, and indeed I now get a network driver listed! However, the WHS it still not found, even after entering the home server name manually. PHS

  Read the article

• PPP kernel module fails to load

  - by Harel

  I am trying to deal with a problem on a server I don't normally deal with. Out of the blue a script using ppp started failing saying that the ppp kernel module is not loaded. When I try to modprobe it it complains about files missing. Note below that the kernel version the server thinks it at, does not match the kernel version directory in /lib/modules. I'm not sure how this could have happened. Could the other maintainers of the server botched a kernel upgrade? My question is how can I fix this discrepancy. Can I simply rename the lib directory and hope for the best? I don't want to break stuff for the people who actually maintain the server but I do need to fix the PPP issue. $ sudo /sbin/modprobe -v ppp FATAL: Could not load /lib/modules/2.6.35.4-rscloud/modules.dep: No such file or directory $ cat /proc/version Linux version 2.6.35.4-rscloud ([email protected]) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #8 SMP Mon Sep 20 15:54:33 UTC 2010 $ ls /lib/modules/ 2.6.33.5-rscloud

  Read the article

• VNC authentication failure

  - by cf16

  I try to connect to my vncserver running on CentOs from home computer, behind firewall. I have installed Win7 and Ubuntu both on this machine. I have an error: VNC conenction failed: vncserver too many security failures even when loging with right credentials (I reset passwd on CentOs) I get: authentication failure. I observe that I have to wait a whole day to be able to relogin at all. Is it something regarding that I try as root? I think important is also that I have to login to remote Centos through port 6050 - none else port works for me. Do I have to do something with other ports? I see that vncserver is listening on 5901, 5902 if another added - and I consider connection is established because from time to time (long time) the passwd prompt appears,... right? I have created additional user1, password for him to CentOS and to VNC, also user2. I do: service vncserver start and two servers starts, one :1, and second on :2. When I try to connect to vncserverIP:1 I get what described above, but when I try connect to vncserverIP:2 it says that the trial was unsuccessful. please help, what to do? additionally: how to disable this lockout for a testing purposes?

  Read the article

• Transparent proxying in MacOS X 10.6 Snow Leopard (and maybe FreeBSD)

  - by apenwarr

  I'm trying to create a transparent proxy on my MacOS machine in order to port the sshuttle ssh-based transproxy VPN from Linux. I think I almost have it working, but sadly, almost is not 100%. Short version is this. In one window, start something that listens on port 12300: $ while :; do nc -l 12300; done Now enable proxying: # sysctl -w net.inet.ip.forwarding=1 # sysctl -w net.inet.ip.fw.enable=1 # ipfw add 1000 fwd 127.0.0.1,12300 log tcp from any to any And now test it out: $ telnet localhost 9999 # any port number will do # this works; type stuff and you'll see it in the nc window $ telnet google.com 80 # any host/port will do # this *doesn't* work! After the latter experiment, I see lines like this in netstat: $ netstat -tn | grep ^tcp4 tcp4 0 0 66.249.91.104.80 192.168.1.130.61072 SYN_RCVD tcp4 0 0 192.168.1.130.61072 66.249.91.104.80 SYN_SENT The second socket belongs to my telnet program; the first is more suspicious. SYN_RCVD implies that my SYN packet was correctly captured by the firewall and taken in by the kernel, but apparently the SYNACK was never sent back to telnet, because it's still in SYN_SENT. On the other hand, if I kill the nc server, I get this: $ telnet google.com 80 Trying 66.249.81.104... telnet: connect to address 66.249.81.104: Connection refused telnet: Unable to connect to remote host ...which is as expected: my proxy server isn't running, so ipfw redirects my connection to port 12300, which has nobody listening on it, ie. connection refused. My uname says this: $ uname -a Darwin mean.local 10.2.0 Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386 i386 Does anybody see any different results? (I'm especially interested in Snow Leopard vs Leopard results, as there seem to be some internet rumours that transproxy is broken in Snow Leopard version) Any advice for how to fix?

  Read the article

• gpg symmetric encryption using pipes

  - by Thomas

  I'm trying to generate keys to lock my drive (using DM-Crypt with LUKS) by pulling data from /dev/random and then encrypting that using GPG. In the guide I'm using, it suggests using the following command: dd if=/dev/random count=1 | gpg --symmetric -a >./[drive]_key.gpg If you do it without a pipe, and feed it a file, it will pop up an (n?)curses prompt for you to type in a password. However when I pipe in the data, it repeats the following message four times and sits there frozen: pinentry-curses: no LC_CTYPE known assuming UTF-8 It also says can't connect to '/root/.gnupg/S.gpg-agent': File or directory doesn't exist, however I am assuming that this doesn't have anything to do with it, since it shows up even when the input is from a file. So I guess my question boils down to this: is there a way to force gpg to accept the passphrase from the command line, or in some other way get this to work, or will I have to write the data from /dev/random to a temporary file, and then encrypt that file? (Which as far as I know should be alright due to the fact that I'm doing this on the LiveCD and haven't yet created the swap, so there should be no way for it to be written to disk.)

  Read the article

• Team Foundation Server 2008 - TF220056 Error during installation

  - by David

  I'm attempting to install Team Foundation Server 2008 on a Windows Server 2003 instance that exists under Hyper-V. The SQL Server database itself is held on the root partition of the Hyper-V server and has the Reporting Services installed (so I've solved the TF220059 error already). After hitting "Next " after typing the name of the SQL Server I get this error: --------------------------- Microsoft Visual Studio 2008 Team Foundation Server Setup --------------------------- TF220056: An unrecoverable error occurred while trying to check the status of the Team Foundation database. Installation cannot continue. Check the install log for more details. --------------------------- OK --------------------------- The error log's stack trace makes it look like a bug in the TFS installer itself: [03/22/10,19:14:42] TFSUI: [2] tfsdb.exe: System.IO.IOException: The directory name is invalid. [03/22/10,19:14:42] TFSUI: [2] tfsdb.exe: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) [03/22/10,19:14:42] TFSUI: [2] tfsdb.exe: at System.IO.__Error.WinIOError() [03/22/10,19:14:43] TFSUI: [2] tfsdb.exe: at System.IO.Path.GetTempFileName() [03/22/10,19:14:43] TFSUI: [2] tfsdb.exe: at Microsoft.TeamFoundation.DatabaseInstaller.CommandLine.Commands.InstallerCommand.get_Log() [03/22/10,19:14:43] TFSUI: [2] tfsdb.exe: at Microsoft.TeamFoundation.DatabaseInstaller.CommandLine.Commands.InstallerCommand.Run() [03/22/10,19:14:43] TFSUI: [2] tfsdb.exe: at Microsoft.TeamFoundation.DatabaseInstaller.CommandLine.CommandLine.RunCommand(String[] args) [03/22/10,19:14:43] TFSUI: [2] tfsdb.exe: The directory name is invalid. [03/22/10,19:14:43] TFSUI: [2] tfsdb.exe check failed with error code: 100 I'm running the installer as the domain Administrator, although the server is a Terminal Server in Application Mode, might that be the cause of the problems?

  Read the article

• Cannot find "IIS APPPOOL\{application pool name}" user account in Windows Server 2008

  - by MacGyver

  Normally when setting up IIS 7, I'm used to allowing permissions to user IIS APPPOOL\{application pool name} on the root folder of my web application(s). I also give permissions to IUSR (or the IIS_IUSRS user group. (Note, in Windows Server 2008, I found that IUSR isn't in that group by default, so I added it). In Windows Server 2008, I cannot find user IIS APPPOOL\{application pool name} under Security under the Windows Folder Properties. I'm using Windows Authentication in ASP.NET. I'm receiving a 401.1 on the page in Internet Explorer 8 after getting the authentication prompt. Mozilla Firefox also gave me a Windows authentication prompt, and got me into the site fine. Same with Google Chrome. How can I solve this one? HTTP Error 401.1 - Unauthorized You do not have permission to view this directory or page using the credentials that you supplied. Specific page information: Module: WindowsAuthenticationModule Notification: AuthenticateRequest Handler: PageHandlerFactory-ISAPI-4.0_32bit Error Code: 0x8009030e Requested URL: http://.....aspx Physical Path: C:\.........aspx Logon Method: Not yet determined Logon User: Not yet determined

  Read the article

< Previous Page | 375 376 377 378 379 380 381 382 383 384 385 386  | Next Page >