Search Results

Search found 41071 results on 1643 pages for 'post update'.

Page 378/1643 | < Previous Page | 374 375 376 377 378 379 380 381 382 383 384 385  | Next Page >

• ODEE Green Field (Windows) Part 3 - SOA Suite

  - by AndyL-Oracle

   So you're still here, are you? I'm sure you're probably overjoyed at the prospect of continuing with our green field installation of ODEE. In my previous post, I covered the installation of WebLogic - you probably noticed, like I did, that it's a pretty quick install. I'm pretty certain this had everything to do with how quickly the next post made it to the internet! So let's dig in. Make sure you've followed the steps from the initial post to obtain the necessary software and prerequisites! Unpack the RCU (Repository Creation Utility). This ZIP file contains a directory (rcuHome) that should be extracted into your ORACLE_HOME. Run the RCU – execute rcuHome/bin/rcu.bat. Click Next. Select Create and click Next. Enter the database connection details and click Next – any failure to connection will show in the Messages box. Click Ok Expand and select the SOA Infrastructure item. This will automatically select additional required components. You can change the prefix used, but DEV is recommended. If you are creating a sandbox that includes additional components like WebCenter Content and UMS, you may select those schemas as well but they are not required for a basic ODEE installation. Click Next. Click OK. Specify the password for the schema(s). Then click Next. Click Next. Click OK. Click OK. Click Create. Click Close. Unpack the SOA Suite installation files into a single directory e.g. SOA. Run the installer – navigate and execute SOA/Disk1/setup.exe. If you receive a JDK error, switch to a command line to start the installer. To start the installer via command line, do Start?Run?cmd and cd into the SOA\Disk1 directory. Run setup.exe –jreLoc < pathtoJRE >. Ensure you do not use a path with spaces – use the ~1 notation as necessary (your directory must not exceed 8 characters so “Program Files” becomes “Progra~1” and “Program Files (x86)” becomes “Progra~2” in this notation). Click Next. Select Skip and click Next. Resolve any issues shown and click Next. Verify your oracle home locations. Defaults are recommended. Click Next. Select your application server. If you’ve already installed WebLogic, this should be automatically selected for you. Click Next. Click Install. Allow the installation to progress… Click Next. Click Finish. You can save the installation details if you want. That should keep you satisfied for the moment. Get ready, because the next posts are going to be meaty! 

  Read the article

• SR Activity Summaries Via Direct Email? You Bet!

  - by PCat

  Courtesy of Ken Walker. I’m a “bottom line” kind of guy.  My friends and co-workers will tell you that I’m a “Direct Communicator” when it comes to work or my social life.  For example, if I were to come up with a fantastic new recipe for a low-fat pan fried chicken, I’d Tweet, email, or find a way to blast the recipe directly to you so that you could enjoy it immediately.  My friends would see the subject, “Awesome New Fried Chicken” and they’d click and see the recipe there before them.Others are “Indirect Communicators.”  My friend Joel is like this.  He would post the recipe in his blog, and then Tweet or email a link back to his blog with a subject, “Fried Chicken.”  Then Joel would sit back and expect his friends to read the email, AND click the link to his blog, and then read the recipe.  As a fan of the “Direct” method, I wish there was a way for me to “Opt-in” for immediate updates from Joel so I could see the recipe without having to click over to his blog to search for it.The same is true for MOS.  If you’ve ever opened a Service Request through My Oracle Support (MOS), you know that most of the communication between you and the Oracle Support Engineer with respect to the issue in the SR, is done via email.  Which type of email would you rather receive in your email account? Example1:Your SR has been updated.  Click HERE to see the update. Or Example2:Your SR has been updated.  Here is the update:  “Hi John, Oracle Development has completed the patch we’ve been waiting for!  Here’s a direct “LINK” to the patch that should resolve your issue.  Please download and install the patch via the instructions (included with the link) and let me know if it does, in fact, resolve your issue!”Example2 is available to you!  All you need to do is to “Opt-In” for the direct email updates.  The default is for the indirect update as seen in Example1.  To turn on “Service Request Details in Email” simply follow these instructions (aided by the screenshot below):1.    Log into MOS, and click on your name in the upper right corner.  Select “My Account.”2.    Make sure “My Account” is highlighted in bold on the left.3.    Turn ON, “Service Request Details in Email” That’s it!  You will now receive the SR Updates, directly in your email account without having to log into MOS, click the SR, scroll down to the updates, etc.  That’s better than Fried Chicken!  (Well; almost better....).

  Read the article

• Why won't my Broadcom BCM4312 LP-PHY work with the STA driver?

  - by Jackson Taylor

  I tried the steps here for a 4312: https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx Both of these: sudo modprobe -r b43 ssb wl sudo modprobe wl return: FATAL: Module wl not found. FATAL: Error running install command for wl (this one is only for the second one actually) I tried the broadcom-sta, didn't work. What's confusing is down below in the next steps for STA with internet access it says to use the bcmwl one. So I install that and it succeeds but with some errors: sudo apt-get install bcmwl-kernel-source Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: module-assistant Use 'apt-get autoremove' to remove it. The following NEW packages will be installed: bcmwl-kernel-source 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/1,181 kB of archives. After this operation, 3,609 kB of additional disk space will be used. Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 168005 files and directories currently installed.) Unpacking bcmwl-kernel-source (from .../bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.112+bdcom-0ubuntu3) ... Loading new bcmwl-5.100.82.112+bdcom DKMS files... Building only for 3.5.0-21-generic Building for architecture x86_64 Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. ERROR: Module b43 does not exist in /proc/modules ERROR: Module b43legacy does not exist in /proc/modules ERROR: Module ssb does not exist in /proc/modules ERROR: Module bcm43xx does not exist in /proc/modules ERROR: Module brcm80211 does not exist in /proc/modules ERROR: Module brcmfmac does not exist in /proc/modules ERROR: Module brcmsmac does not exist in /proc/modules ERROR: Module bcma does not exist in /proc/modules FATAL: Module wl not found. FATAL: Error running install command for wl update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.5.0-21-generic jtaylor991@jtaylor991-whiteHP:~$ sudo modprobe wl FATAL: Module wl not found. FATAL: Error running install command for wl Then I do the modprobe wl commands listed above and it gives the above listed errors. It didn't work with the broadcom-sta driver either. I installed the b43 ones but nothing happened, and I don't know why so those are still installed. firmware-b43legacy-installer, b43-fwcutter and firmware-b43-lpphy-installer (yes it is a LP-PHY) are currently installed. If I go into System Settings Software Sources Additional Drivers it says "Using Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source (proprietary) But bcmwl-kernel-source isn't installed. I could try again but I remember rebooting and it still said this. What's funny is it found wireless networks during the Ubuntu setup/installation, I don't remember if I got it to connect or not though. I think it kept asking for a password when I put it in (yes it was right I showed password and looked at it) so I just ignored it. But right now the Enable Wireless option in the top right is just gone, it's just Enable Networking and I'm on ethernet on this HP Pavilion dv4-1435dx right here. If I run rfkill list it shows: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no It was hard blocked at the beginning but unblocking it makes no change. Also it's a touch sensitive button, and it appears to be always orange no matter if it's enabled or not because when I touch it the hard blocked changes between yes and no in rfkill list. I think it was blue for a minute at one point. What is going on?!?! Help me! Lol, thanks for any and all of your time guys. Oh yeah this is Ubuntu 12.10 fresh install.

  Read the article

• Arcball Problems with UDK

  - by opdude

  I'm trying to re-create an arcball example from a Nehe, where an object can be rotated in a more realistic way while floating in the air (in my game the object is attached to the player at a distance like for example the Physics Gun) however I'm having trouble getting this to work with UDK. I have created an LGArcBall which follows the example from Nehe and I've compared outputs from this with the example code. I think where my problem lies is what I do to the Quaternion that is returned from the LGArcBall. Currently I am taking the returned Quaternion converting it to a rotation matrix. Getting the product of the last rotation (set when the object is first clicked) and then returning that into a Rotator and setting that to the objects rotation. If you could point me in the right direction that would be great, my code can be found below. class LGArcBall extends Object; var Quat StartRotation; var Vector StartVector; var float AdjustWidth, AdjustHeight, Epsilon; function SetBounds(float NewWidth, float NewHeight) { AdjustWidth = 1.0f / ((NewWidth - 1.0f) * 0.5f); AdjustHeight = 1.0f / ((NewHeight - 1.0f) * 0.5f); } function StartDrag(Vector2D startPoint, Quat rotation) { StartVector = MapToSphere(startPoint); } function Quat Update(Vector2D currentPoint) { local Vector currentVector, perp; local Quat newRot; //Map the new point to the sphere currentVector = MapToSphere(currentPoint); //Compute the vector perpendicular to the start and current perp = startVector cross currentVector; //Make sure our length is larger than Epsilon if (VSize(perp) > Epsilon) { //Return the perpendicular vector as the transform newRot.X = perp.X; newRot.Y = perp.Y; newRot.Z = perp.Z; //In the quaternion values, w is cosine (theta / 2), where //theta is the rotation angle newRot.W = startVector dot currentVector; } else { //The two vectors coincide, so return an identity transform newRot.X = 0.0f; newRot.Y = 0.0f; newRot.Z = 0.0f; newRot.W = 0.0f; } return newRot; } function Vector MapToSphere(Vector2D point) { local float x, y, length, norm; local Vector result; //Transform the mouse coords to [-1..1] //and inverse the Y coord x = (point.X * AdjustWidth) - 1.0f; y = 1.0f - (point.Y * AdjustHeight); length = (x * x) + (y * y); //If the point is mapped outside of the sphere //( length > radius squared) if (length > 1.0f) { norm = 1.0f / Sqrt(length); //Return the "normalized" vector, a point on the sphere result.X = x * norm; result.Y = y * norm; result.Z = 0.0f; } else //It's inside of the sphere { //Return a vector to the point mapped inside the sphere //sqrt(radius squared - length) result.X = x; result.Y = y; result.Z = Sqrt(1.0f - length); } return result; } DefaultProperties { Epsilon = 0.000001f } I'm then attempting to rotate that object when the mouse is dragged, with the following update code in my PlayerController. //Get Mouse Position MousePosition.X = LGMouseInterfacePlayerInput(PlayerInput).MousePosition.X; MousePosition.Y = LGMouseInterfacePlayerInput(PlayerInput).MousePosition.Y; newQuat = ArcBall.Update(MousePosition); rotMatrix = MakeRotationMatrix(QuatToRotator(newQuat)); rotMatrix = rotMatrix * LastRot; LGMoveableActor(movingPawn.CurrentUseableObject).SetPhysics(EPhysics.PHYS_Rotating); LGMoveableActor(movingPawn.CurrentUseableObject).SetRotation(MatrixGetRotator(rotMatrix));

  Read the article

• E-Business Suite : Role of CHUNK_SIZE in Oracle Payroll

  - by Giri Mandalika

  Different batch processes in Oracle Payroll flow have the ability to spawn multiple child processes (or threads) to complete the work in hand. The number of child processes to fork is controlled by the THREADS parameter in APPS.PAY_ACTION_PARAMETERS view. THREADS parameter The default value for THREADS parameter is 1, which is fine for a single-processor system but not optimal for the modern multi-core multi-processor systems. Setting the THREADS parameter to a value equal to or less than the total number of [virtual] processors available on the system may improve the performance of payroll processing. However on the down side, since multiple child processes operate against the same set of payroll tables in HR schema, database may experience undesired consequences such as buffer busy waits and index contention, which results in giving up some of the gains achieved by using multiple child processes/threads to process the work. Couple of other action parameters, CHUNK_SIZE and CHUNK_SHUFFLE, help alleviate the database contention. eg., Set a value for THREADS parameter as shown below. CONNECT APPS/APPS_PASSWORD UPDATE PAY_ACTION_PARAMETERS SET PARAMETER_VALUE = DESIRED_VALUE WHERE PARAMETER_NAME = 'THREADS'; COMMIT; (I am not aware of any maximum value for THREADS parameter) CHUNK_SIZE parameter The size of each commit unit for the batch process is controlled by the CHUNK_SIZE action parameter. In other words, chunking is the act of splitting the assignment actions into commit groups of desired size represented by the CHUNK_SIZE parameter. The default value is 20, and each thread processes one chunk at a time -- which means each child process inserts or processes 20 assignment actions at any time. When multiple threads are configured, each thread picks up a chunk to process, completes the assignment actions and then picks up another chunk. This is repeated until all the chunks are exhausted. It is possible to use different chunk sizes in different batch processes. During the initial phase of processing, CHUNK_SIZE number of assignment actions are inserted into relevant table(s). When multiple child processes are inserting data at the same time into the same set of tables, as explained earlier, database may experience contention. The default value of 20 is mostly optimal in such a case. Experiment with different values for the initial phase by +/-10 for CHUNK_SIZE parameter and observe the performance impact. A larger value may make sense during the main processing phase. Again experimentation is the key in finding the suitable value for your environment. Start with a large value such as 2000 for the chunk size, then increment or decrement the size by 500 at a time until an optimal value is found. eg., Set a value for CHUNK_SIZE parameter as shown below. CONNECT APPS/APPS_PASSWORD UPDATE PAY_ACTION_PARAMETERS SET PARAMETER_VALUE = DESIRED_VALUE WHERE PARAMETER_NAME = 'CHUNK_SIZE'; COMMIT; CHUNK_SIZE action parameter accepts a value that is as low as 1 or as high as 16000. CHUNK SHUFFLE parameter By default, chunks of assignment actions are processed sequentially by all threads - which may not be a good thing especially given that all child processes/threads performing similar actions against the same set of tables almost at the same time. By saying not a good thing, I mean to say that the default behavior leads to contention in the database (in data blocks, for example). It is possible to relieve some of that database contention by randomizing the processing order of chunks of assignment actions. This behavior is controlled by the CHUNK SHUFFLE action parameter. Chunk processing is not randomized unless explicitly configured. eg., Set chunk shuffling as shown below. CONNECT APPS/APPS_PASSWORD UPDATE PAY_ACTION_PARAMETERS SET PARAMETER_VALUE = 'Y' WHERE PARAMETER_NAME = 'CHUNK SHUFFLE'; COMMIT; Finally I recommend checking the following document out for additional details and additional pay action tunable parameters that may speed up the processing of Oracle Payroll.     My Oracle Support Doc ID: 226987.1 Oracle 11i & R12 Human Resources (HRMS) & Benefits (BEN) Tuning & System Health Checks Also experiment with different combinations of parameters and values until the right set of action parameters and values are found for your deployment.

  Read the article

• Rotating a cube using jBullet collisions

  - by Kenneth Bray

  How would one go about rotating/flipping a cube with the physics of jBullet? Here is my Draw method for my cube object: public void Draw() { // center point posX, posY, posZ float radius = .25f;//size / 2; glPushMatrix(); glBegin(GL_QUADS); //top { glColor3f(5.0f,1.0f,5.0f); // white glVertex3f(posX + radius, posY + radius, posZ - radius); glVertex3f(posX - radius, posY + radius, posZ - radius); glVertex3f(posX - radius, posY + radius, posZ + radius); glVertex3f(posX + radius, posY + radius, posZ + radius); } //bottom { glColor3f(1.0f,1.0f,0.0f); // ?? color glVertex3f(posX + radius, posY - radius, posZ + radius); glVertex3f(posX - radius, posY - radius, posZ + radius); glVertex3f(posX - radius, posY - radius, posZ - radius); glVertex3f(posX + radius, posY - radius, posZ - radius); } //right side { glColor3f(1.0f,0.0f,1.0f); // ?? color glVertex3f(posX + radius, posY + radius, posZ + radius); glVertex3f(posX + radius, posY - radius, posZ + radius); glVertex3f(posX + radius, posY - radius, posZ - radius); glVertex3f(posX + radius, posY + radius, posZ - radius); } //left side { glColor3f(0.0f,1.0f,1.0f); // ?? color glVertex3f(posX - radius, posY + radius, posZ - radius); glVertex3f(posX - radius, posY - radius, posZ - radius); glVertex3f(posX - radius, posY - radius, posZ + radius); glVertex3f(posX - radius, posY + radius, posZ + radius); } //front side { glColor3f(0.0f,0.0f,1.0f); // blue glVertex3f(posX + radius, posY + radius, posZ + radius); glVertex3f(posX - radius, posY + radius, posZ + radius); glVertex3f(posX - radius, posY - radius, posZ + radius); glVertex3f(posX + radius, posY - radius, posZ + radius); } //back side { glColor3f(0.0f,1.0f,0.0f); // green glVertex3f(posX + radius, posY - radius, posZ - radius); glVertex3f(posX - radius, posY - radius, posZ - radius); glVertex3f(posX - radius, posY + radius, posZ - radius); glVertex3f(posX + radius, posY + radius, posZ - radius); } glEnd(); glPopMatrix(); Update(); } This is my update method for the cube position: public void Update() { Transform trans = new Transform(); cubeRigidBody.getMotionState().getWorldTransform(trans); posX = trans.origin.x; posY = trans.origin.y; posZ = trans.origin.z; Quat4f outRot = new Quat4f(); trans.getRotation(outRot); rotX = outRot.x; rotY = outRot.y; rotZ = outRot.z; rotW = outRot.w; } I am assuming I need to use glrotatef, but it does not seem to work at all when I try that.. this is how I have tried to rotate the cubes: GL11.glRotatef(rotW, rotX, 0.0f, 0.0f); GL11.glRotatef(rotW, 0.0f, rotY, 0.0f); GL11.glRotatef(rotW, 0.0f, 0.0f, rotZ);

  Read the article

• Why googling by keycaptcha gives results on reCAPTCHA? [closed]

  - by vgv8

  EDIT: I'd like to change this title to: How to STOP Google's manipulation of Google search engine presented to general public? I am frequently googling and more and more frequently bump when searching by one software product I am given instead the results on Google's own products. For ex., if I google by keyword keycaptcha for the "Past 24 hours" (after clicking on "Show search tools" -- "Past 24 hours" on the left sidebar of a browser) I am getting the Google's search results show only results on reCAPTCHA. Image uploaded later: Though, if confine keycaptcha in quotes the results are "correct" (well, kind of since they are still distorted in comparison with other search engines). I checked this during few months from different domains at different ISPs, different operating systems and from a dozen of browsers. The results are the same. Why is it and how can it be possibly corrected? My related posts: "How Gmail spam filter works?" IP adresses blacklisting Update: It is impossible for me to directly start using google.com as I am always redirected to google.ru (from google.com) by my ip-address "auto-detect location" google's "convenience". The google's help tells that it is impossible to switch off my location auto-detection because it is very helpful feature. There is a work-around to use google.com/ncr (to get google.com) (?anybody know what does it mean) to prevent redirection from google.com but even. But all results are exactly the same OK, I can search by quoted "keycaptcha", I am already accustomed to these google's quirks, but the question arises why the heck to burn time promoting someone's product if GOOGLE uses other product brands for showing its own interests/brands (reCAPTCHA) instead and what can be done with it? The general user will not understand that he was cheated and just will pick up the first (wrong) results Update2: Note that this googling behaviour: is independent on whether I am logged-in (or log-out-ed of) a google account, which account, on browser (I tried Opera, Chrome, FireFox, IE of different versions, Safari), OS or even domain; there are many such cases but I just targeted one concrete restricted example speciffically to to prevent wandering between unrelated details and peculiarities; @Michael, first it is not true and this text contains 2 links for real and significant results.. I also wrote that this is just one concrete example from many and based on many-month exp. These distortions happen upon clicking on: Past 24 hours, Past week, Past month, Past year in many other keywords, occasions/configurations of searches, etc. Second, the absence of the results is the result and there is no point to sneakingly substitute it by another unsolicited one. It is the definition of spam and scam. 3d, the question is not abt workarounds like how to write search queries or use another searching engines. The question is how to straighten the googling's results in order to stop disorienting general public about. Update: I could not understand: nobody reproduces the described by me behavior (i.e. when I click "Past 24 hours" link in google search searching for keycaptcha, the presented results are only on reCAPTCHA presented)? Update: And for the "Past week":

  Read the article

• Problem with sprite direction and rotation

  - by user2236165

  I have a sprite called Tool that moves with a speed represented as a float and in a direction represented as a Vector2. When I click the mouse on the screen the sprite change its direction and starts to move towards the mouseclick. In addition to that I rotate the sprite so that it is facing in the direction it is heading. However, when I add a camera that is suppose to follow the sprite so that the sprite is always centered on the screen, the sprite won't move in the given direction and the rotation isn't accurate anymore. This only happens when I add the Camera.View in the spriteBatch.Begin(). I was hoping anyone could maybe shed a light on what I am missing in my code, that would be highly appreciated. Here is the camera class i use: public class Camera { private const float zoomUpperLimit = 1.5f; private const float zoomLowerLimit = 0.1f; private float _zoom; private Vector2 _pos; private int ViewportWidth, ViewportHeight; #region Properties public float Zoom { get { return _zoom; } set { _zoom = value; if (_zoom < zoomLowerLimit) _zoom = zoomLowerLimit; if (_zoom > zoomUpperLimit) _zoom = zoomUpperLimit; } } public Rectangle Viewport { get { int width = (int)((ViewportWidth / _zoom)); int height = (int)((ViewportHeight / _zoom)); return new Rectangle((int)(_pos.X - width / 2), (int)(_pos.Y - height / 2), width, height); } } public void Move(Vector2 amount) { _pos += amount; } public Vector2 Position { get { return _pos; } set { _pos = value; } } public Matrix View { get { return Matrix.CreateTranslation(new Vector3(-_pos.X, -_pos.Y, 0)) * Matrix.CreateScale(new Vector3(Zoom, Zoom, 1)) * Matrix.CreateTranslation(new Vector3(ViewportWidth * 0.5f, ViewportHeight * 0.5f, 0)); } } #endregion public Camera(Viewport viewport, float initialZoom) { _zoom = initialZoom; _pos = Vector2.Zero; ViewportWidth = viewport.Width; ViewportHeight = viewport.Height; } } And here is my Update and Draw-method: protected override void Update (GameTime gameTime) { float elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; TouchCollection touchCollection = TouchPanel.GetState (); foreach (TouchLocation tl in touchCollection) { if (tl.State == TouchLocationState.Pressed || tl.State == TouchLocationState.Moved) { //direction the tool shall move towards direction = touchCollection [0].Position - toolPos; if (direction != Vector2.Zero) { direction.Normalize (); } //change the direction the tool is moving and find the rotationangle the texture must rotate to point in given direction toolPos += (direction * speed * elapsed); RotationAngle = (float)Math.Atan2 (direction.Y, direction.X); } } if (direction != Vector2.Zero) { direction.Normalize (); } //move tool in given direction toolPos += (direction * speed * elapsed); //change cameracentre to the tools position Camera.Position = toolPos; base.Update (gameTime); } protected override void Draw (GameTime gameTime) { graphics.GraphicsDevice.Clear (Color.Blue); spriteBatch.Begin (SpriteSortMode.BackToFront, BlendState.AlphaBlend, null, null, null, null, Camera.View); spriteBatch.Draw (tool, new Vector2 (toolPos.X, toolPos.Y), null, Color.White, RotationAngle, originOfToolTexture, 1, SpriteEffects.None, 1); spriteBatch.End (); base.Draw (gameTime); }

  Read the article

• XNA WP7 Texture memory and ContentManager

  - by jlongstreet

  I'm trying to get my WP7 XNA game's memory under control and under the 90MB limit for submission. One target I identified was UI textures, especially fullscreen ones, that would never get unloaded. So I moved UI texture loads to their own ContentManager so I can unload them. However, this doesn't seem to affect the value of Microsoft.Phone.Info.DeviceExtendedProperties.GetValue("ApplicationCurrentMemoryUsage"), so it doesn't look like the memory is actually being released. Example: splash screens. In Game.LoadContent(): Application.Instance.SetContentManager("UI"); // set the current content manager for (int i = 0; i < mSplashTextures.Length; ++i) { // load the splash textures mSplashTextures[i] = Application.Instance.Content.Load<Texture2D>(msSplashTextureNames[i]); } // set the content manager back to the global one Application.Instance.SetContentManager("Global"); When the initial load is done and the title screen starts, I do: Application.Instance.GetContentManager("UI").Unload(); The three textures take about 6.5 MB of memory. Before unloading the UI ContentManager, I see that ApplicationCurrentMemoryUsage is at 34.29 MB. After unloading the ContentManager (and doing a full GC.Collect()), it's still at 34.29 MB. But after that, I load another fullscreen texture (for the title screen background) and memory usage still doesn't change. Could it be keeping the memory for these textures allocated and reusing it? edit: very simple test: protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. spriteBatch = new SpriteBatch(GraphicsDevice); PrintMemUsage("Before texture load: "); // TODO: use this.Content to load your game content here red = this.Content.Load<Texture2D>("Untitled"); PrintMemUsage("After texture load: "); } private void PrintMemUsage(string tag) { Debug.WriteLine(tag + Microsoft.Phone.Info.DeviceExtendedProperties.GetValue("ApplicationCurrentMemoryUsage")); } protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); // TODO: Add your update logic here if (count++ == 100) { GC.Collect(); GC.WaitForPendingFinalizers(); PrintMemUsage("Before CM unload: "); this.Content.Dispose(); GC.Collect(); GC.WaitForPendingFinalizers(); PrintMemUsage("After CM unload: "); red = null; spriteBatch.Dispose(); GC.Collect(); GC.WaitForPendingFinalizers(); PrintMemUsage("After SpriteBatch Dispose(): "); } base.Update(gameTime); } protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); // TODO: Add your drawing code here if (red != null) { spriteBatch.Begin(); spriteBatch.Draw(red, new Vector2(0,0), Color.White); spriteBatch.End(); } base.Draw(gameTime); } This prints something like (it changes every time): Before texture load: 7532544 After texture load: 10727424 Before CM unload: 9875456 After CM unload: 9953280 After SpriteBatch Dispose(): 9953280

  Read the article

• Upgrade to Xubuntu 13.10 - Saucy Salamander

  As a common 'fashion' it is possible to upgrade an existing installation of Ubuntu or one of its derivates every six months. Of course, you might opt-in for the adventure and directly keep your system always on the latest version (including alphas and betas), or you might like to play safe and stay on the long-term support (LTS) versions which are updated every two years only. As for me, I'd like to jump from release to release on my main desktop machine. And since 17th October Saucy Salamander or also known as Ubuntu 13.10 has been released for general use. The following paragraphs document the steps I went in order to upgrade my system to the recent version. Don't worry about the fact that I'm actually using Xubuntu. It's mainly a flavoured version of Ubuntu running Xfce 4.10 as default X Window manager. Well, I have Gnome and LXDE on the same system... just out of couriosity. Preparing the system Before you think about upgrading you have to ensure that your current system is running on the latest packages. This can be done easily via a terminal like so: $ sudo apt-get update && sudo apt-get -y dist-upgrade --fix-missing Next, we are going to initiate the upgrade itself: $ sudo update-manager As a result the graphical Software Updater should inform you that a newer version of Ubuntu is available for installation. Ubuntu's Software Updater informs you whether an upgrade is available Running the upgrade After clicking 'Upgrade...' you will be presented with information about the new version. Details about Ubuntu 13.10 (Saucy Salamander) Simply continue with the procedure and your system will be analysed for the next steps. Analysing the existing system and preparing the actual upgrade to 13.10 Next, we are at the point of no return. Last confirmation dialog before having a coffee break while your machine is occupied to download the necessary packages. Not the best bandwidth at hand after all... yours might be faster. Are you really sure that you want to start the upgrade? Let's go and have fun! Anyway, bye bye Raring Ringtail and Welcome Saucy Salamander! In case that you added any additional repositories like Medibuntu or PPAs you will be informed that they are going to be disabled during the upgrade and they might require some manual intervention after completion. Ubuntu is playing safe and third party repositories are disabled during the upgrade Well, depending on your internet bandwidth this might take something between a couple of minutes and some hours to download all the packages and then trigger the actual installation process. In my case I left my PC unattended during the night. Time to reboot Finally, it's time to restart your system and see what's going to happen... In my case absolutely nothing unexpected. The system booted the new kernel 3.11.0 as usual and I was greeted by a new login screen. Honestly, 'same' system as before - which is good and I love that fact of consistency - and I can continue to work productively. And also Software Updater confirms that we just had a painless upgrade: System is running Ubuntu 13.10 - Saucy Salamander - and up to date See you in six months again... ;-) Post-scriptum In case that you would to upgrade to the latest development version of Ubuntu, run the following command in a console: $ sudo update-manager -d And repeat all steps as described above.

  Read the article

• Rethinking Oracle Optimizer Statistics for P6 Part 2

  - by Brian Diehl

  In the previous post (Part 1), I tried to draw some key insights about the relationship between P6 and Oracle Optimizer Statistics.  The first is that average cardinality has the greatest impact on query optimization and that the particular queries generated by P6 are more likely to use this average during calculations. The second is that these are statistics that are unlikely to change greatly over the life of the application. Ultimately, our goal is to get the best query optimization possible.  Or is it? Stability No application administrator wants to get the call at 9am that their application users cannot get there work done because everything is running slow. This is a possibility with a regularly scheduled nightly collection of statistics. It may not just be slow performance, but a complete loss of service because one or more queries are optimized poorly. Ideally, this should not be the case. The database optimizer should make better decisions with more up-to-date data. Better statistics may give incremental performance benefit. However, this benefit must be balanced against the potential cost of system down time.  It is stability that we ultimately desire and not absolute optimal performance. We do want the benefit from more accurate statistics and better query plans, but not at the risk of an unusable system. As a result, I've developed the following methodology around managing database statistics for the P6 database.  1. No Automatic Re-Gathering - The daily, weekly, or other interval of statistic gathering is unlikely to be beneficial. Quite the opposite. It is more likely to cause problems. 2. Smart Re-Gathering - The time to collect statistics is when things have changed significantly. For a new installation of P6, this is happening more often because the data is growing from a few rows to thousands and more. But for a mature system, the data is not changing significantly from week-to-week. There are times to collect statistics: New releases of the application Changes in the underlying hardware or software versions (ex. new Oracle RDBMS version) When additional user groups are added. The new groups may use the software in significantly different ways. After significant changes in the data. This may be monthly, quarterly or yearly.  3. Always Test - If you take away one thing from this post, it would be to always have a plan to test after changing statistics. In reality, statistics can be collected as often as you desire provided there are tests in place to verify that performance is the same or better. These might be automated tests or simply a manual script of application functions. 4. Have a Way Out - Never change the statistics without a way to return to the previous set. Think of the statistics as one part of the overall application code that also includes the source code--both application and RDBMS. It would be foolish to change to the new code without a way to get back to the previous version. In the final post, I will talk about the actual script I created for P6 PMDB and possible future direction for managing query performance. 

  Read the article

• Using Perl WWW::Facebook::API to Publish To Facebook Newsfeed

  - by Russell C.

  We use Facebook Connect on our site in conjunction with the WWW::Facebook::API CPAN module to publish to our users newsfeed when requested by the user. So far we've been able to successfully update the user's status using the following code: use WWW::Facebook::API; my $facebook = WWW::Facebook::API->new( desktop => 0, api_key => $fb_api_key, secret => $fb_secret, session_key => $query->cookie($fb_api_key.'_session_key'), session_expires => $query->cookie($fb_api_key.'_expires'), session_uid => $query->cookie($fb_api_key.'_user') ); my $response = $facebook->stream->publish( message => qq|Test status message|, ); However, when we try to update the code above so we can publish newsfeed stories that include attachments and action links as specified in the Facebook API documentation for Stream.Publish, we have tried about 100 different ways without any success. According to the CPAN documentation all we should have to do is update our code to something like the following and pass the attachments & action links appropriately which doesn't seem to work: my $response = $facebook->stream->publish( message => qq|Test status message|, attachment => $json, action_links => [@links], ); For example, we are passing the above arguments as follows: $json = qq|{ 'name': 'i\'m bursting with joy', 'href': ' http://bit.ly/187gO1', 'caption': '{*actor*} rated the lolcat 5 stars', 'description': 'a funny looking cat', 'properties': { 'category': { 'text': 'humor', 'href': 'http://bit.ly/KYbaN'}, 'ratings': '5 stars' }, 'media': [{ 'type': 'image', 'src': 'http://icanhascheezburger.files.wordpress.com/2009/03/funny-pictures-your-cat-is-bursting-with-joy1.jpg', 'href': 'http://bit.ly/187gO1'}] }|; @links = ["{'text':'Link 1', 'href':'http://www.link1.com'}","{'text':'Link 2', 'href':'http://www.link2.com'}"]; The above, nor any of the other representations we tried seem to work. I'm hoping some other perl developer out there has this working and can explain how to create the attachment and action_links variables appropriately in Perl for posting to the Facebook news feed through WWW::Facebook::API. Thanks in advance for your help!

  Read the article

• Upload file in Android webview

  - by Sunny

  I have a html form like this <form data-ajax="false" action='UserPhoto.php' class="settings" method='POST' enctype='multipart/form-data' > <input type='file' style="height:25px" name='photo' /> <input type='hidden' name='task' value='upload'> <input type='hidden' name='file_size' value='5000000'> and I want to upload it by using webView posturl function, is it possible? as I know posturl can send String data by this way String value1 = "persistent=1"; String value2 = "&email="+ 2nd_value; String value3 = "&password="+ 3rd_value; String postData = value1+value2+value3; webView.postUrl("http://www.abc.php",EncodingUtils.getBytes(postData, "BASE64")); but is it possible for me to post .png together with some string values? and I know another method using this way to upload photo conn.setRequestProperty("Connection", "Keep-Alive"); conn.setRequestProperty("ENCTYPE", "multipart/form-data"); conn.setRequestProperty("Content-Type", "multipart/form-data;boundary=" + boundary); conn.setRequestProperty("photo", fileName); but this way doesn't communicate with webview, I need to post the photo using webview as user session is kept with it. Thanks for helping.

  Read the article

• HttpWebRequest sessionID c# login

  - by warne

  Im trying to login to a website (www.vodafone.ie) with a console app and c# httpWebRequest. Problem is it works ok about 50% of the time. Im using fiddler to find out the GET and POST requests I need to make. Done that and my app is successfully recreating these as best as I can see. The steps are; 1) GET request with cookie container to login uri. server response sets new cookie called jsessionID 2) do POST request with login credentials and same cookie container containing previous jsessionID. Looking at the fiddler logs for successful POST request login (browser or my app) I see it sets a thing in the response header : "Set-cookie: supercookie=-; Expires=Thu, 01-Jan-1970 00:00:10 GMT; Path=". What is this supercookie thing? Its not returned to me in the response cookie collection like the jsessionID. On rare occasions, there is along string of numbers with the supercookie instead of just "-". I made sure to clear all cookies before analyzing the request/response headers. If the super cookie thing is not being set in the reponse my login fails. So just wondering what's going on here? cheers!

  Read the article

• How to use multiple DisplayName attribute using Entity Framework and ASP.Net Mvc 2

  - by Picflight

  Depending on where I use my Class, I want to be able to show a different DisplayName. I have the following class: [MetadataType(typeof(PortalMetaData))] [System.Web.Mvc.Bind(Exclude = "PortalId")] public partial class Portal { public Portal() { this.Created = DateTime.Now; } } public class PortalMetaData { [Required(ErrorMessage = "Portal name is required")] [StringLength(50, ErrorMessage = "Portal name must be under 50 characters")] public object PortalName { get; set; } [Required(ErrorMessage = "Description is required")] public object Description { get; set; } } I have a corresponding Table in the database Portal I use the Portal table with a PortalController for the Site Admin to update the records in the Portal Table. I want another user with a different Role (AsstAdmin) to be able to update this table as well. To facilitate that I am thinking of creating a separate partial class that somehow links back to the Portal Model. This would allow me to display limited Fields for update by the AsstAdmin and I can display a different name for the Field as well. How can I accomplish this task? If I add the following class which inherits from Portal than I get an exception: Unable to cast object of type 'Project1.Mvc.Models.Portal' to type 'Prpject1.Mvc.Models.Site'. [MetadataType(typeof(SiteMetaData))] public class Site : Portal { public Site() { } } public class SiteMetaData { [Required(DisplayName = "Site Description")] public object Description { get; set; } }

  Read the article

• ConcurrentDictionary and updating values

  - by rboarman

  Hello, After searching via Google and coming up empty, I decided to ask the gurus here on StackOverflow. I am trying to update entries in a ConcurrentDictionary something like this: class Class1 { public int Counter { get; set; } } class Test { private ConcurrentDictionary<int, Class1> dict = new ConcurrentDictionary<int, Class1>(); public void TestIt() { foreach (var foo in dict) { foo.Value.Counter = foo.Value.Counter + 1; // Simplified example } } } Essentially I need to iterate over the dictionary and update a field on each Value. I understand from the documentation that I need to avoid using the Value property. Instead I think I need to use TryUpdate except that I don’t want to replace my whole object. Instead, I want to update a field on the object. After reading this: http://blogs.msdn.com/b/pfxteam/archive/2010/01/08/9945809.aspx Perhaps I need to use AddOrUpdate and simply do nothing in the add delegate. Does anyone have any insight as to how to do this? Thank you, Rick

  Read the article

• Loading GeckoWebBrowser Exceptions

  - by Mostafa Mahdieh

  I get a strange exception when a window containing a GeckoWebBrowser is loaded. This is the exception message: An unhandled exception of type System.Runtime.InteropServices.COMException occurred in Skybound.Gecko.dll Additional information: Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)) This is the windows code: public partial class AddContents : Form { String path; public AddContents(String path) { this.path = path; InitializeComponent(); } private void exitToolStripMenuItem_Click(object sender, EventArgs e) { this.Close(); } private void AddContents_Load(object sender, EventArgs e) { geckoWebBrowser1.Navigate(path); } private int selId = 1; private bool updateMode = false; private void timer1_Tick(object sender, EventArgs e) { if (updateMode) update(); } private void geckoWebBrowser1_DocumentCompleted(object sender, EventArgs e) { timer1.Enabled = true; updateMode = true; } private void treeView1_AfterSelect(object sender, TreeViewEventArgs e) { geckoWebBrowser1.Navigate("javascript:scrollToBookmark(" + treeView1.SelectedNode.Tag + ")"); TreeNode selected = treeView1.SelectedNode; TreeNode prev = selected.PrevNode; TreeNode next = selected.PrevNode; if (prev == null) upButton.Enabled = false; if (next == null) downButton.Enabled = false; } private void update() { geckoWebBrowser1.Navigate("javascript:updateSelText()"); GeckoElement el = geckoWebBrowser1.Document.GetElementById("sel_result_991231"); if (el != null) { textBox1.Text = el.InnerHtml; addButton.Enabled = !textBox1.Text.Trim().Equals(String.Empty); } } private void textBox1_Enter(object sender, EventArgs e) { updateMode = false; } private void geckoWebBrowser1_DomMouseDown(object sender, GeckoDomMouseEventArgs e) { updateMode = true; update(); } private void geckoWebBrowser1_DomMouseUp(object sender, GeckoDomMouseEventArgs e) { updateMode = false; } private void addButton_Click(object sender, EventArgs e) { geckoWebBrowser1.Navigate("javascript:addIdToSel()"); TreeNode t = new TreeNode(textBox1.Text); t.Tag = selId; treeView1.Nodes.Add(t); selId++; } }

  Read the article

• PayPal IPN Response

  - by Gorkem Tolan

  I am having a problem with PayPal IPN response. After payment is made by the customer, PayPal IPN returns this URL: www.mywebsite.com?orderid=32&tx=2AC67201DL3533325&st=Pending&amt=2.50&cc=USD&cm=&item_number=32 There are a couple of issues Post-back field names are undefined or missing. Thus I can get the INVALID message. I am not sure if my website does not read POST variables. When I looked at IPN history, it shows that each IPN has been sent with the complete url. Payment status keeps coming Pending. Does this issue cause the first issue? Thank you for your responses in advance. Here is the code: Dim strSandbox As String, strLive As String Dim req As HttpWebRequest strSandbox = "http://www.sandbox.paypal.com/cgi-bin/webscr/" strLive = "https://www.paypal.com/cgi-bin/webscr" req = CType(WebRequest.Create(strSandbox), HttpWebRequest) 'Set values for the request back req.Method = "POST" req.ContentType = "application/x-www-form-urlencoded" Dim param() As Byte param = Request.BinaryRead(HttpContext.Current.Request.ContentLength) Dim strRequest As String strRequest = Encoding.ASCII.GetString(param) strRequest = strRequest & "&cmd=_notify-validate" req.ContentLength = strRequest.Length 'Response.Write(strRequest) 'Send the request to PayPal and get the response Dim streamOut As StreamWriter streamOut = New StreamWriter(req.GetRequestStream(), System.Text.Encoding.ASCII) streamOut.Write(strRequest) streamOut.Close() Dim streamIn As StreamReader streamIn = New StreamReader(req.GetResponse().GetResponseStream()) Dim strResponse As String strResponse = streamIn.ReadToEnd() Response.Write(strResponse) streamIn.Close() If (strResponse = "VERIFIED") Then Response.Redirect("thankyou.aspx") ElseIf (strResponse = "INVALID") Then End If

  Read the article

• Add new item to UITableView and Core Data as data source?

  - by David.Chu.ca

  I have trouble to add new item to my table view with core data. Here is the brief logic in my codes. In my ViewController class, I have a button to trigle the edit mode: - (void) toggleEditing { UITableView *tv = (UITableView *)self.view; if (isEdit) // class level flag for editing { self.newEntity = [NSEntityDescription insertNewObjectForEntityName:@"entity1" inManagedObjectContext:managedObjectContext]; NSArray *insertIndexPaths = [NSArray arrayWithObjects: [NSInextPath indexPathForRow:0 inSection:0], nil]; // empty at beginning so hard code numbers here. [tv insertRowsAtIndexPaths:insertIndexPaths withRowAnimation:UITableViewRowAnimationFade]; [self.tableView setEditing:YES animated:YES]; // enable editing mode } else { ...} } In this block of codes, I added a new item to my current managed object context first, and then I added a new row to my tv. I think that both the number of objects in my data source or context and the number of rows in my table view should be 1. However, I got an exception in the event of tabView:numberOfRowsInSection: Invalid update: invalid number of rows in section 0. The number of rows contained in an existing section after the update (0) must be equal to the number of rows contained in that section before the update (0), plus or minus the number of rows inserted or deleted from that section (1 inserted, 0 deleted). The exception was raised right after the delegate event: - (NSInteger) tableView:(UITableView *) tableView numberOfRawsInSection:(NSInteger) section { // fetchedResultsController is class member var NSFetchedResultsController id <NSFechedResultsSectionInfo> sectionInfo = [[fetchedResultsController sections] objectAtIndex: section]; NSInteger rows = [sectionInfo numberOfObjects]; return rows; } In debug mode, I found that the rows was still 0 and the event invoked after the the even of toggleEditing. It looks like that sectionInfo obtained from fetchedResultsController did not include the new entity object inserted. Not sure if I miss anything or steps? I am not sure how it works: to get the fetcedResultsController notified or reflect the change when a new entity is inserted into the current managed object context?

  Read the article

• Calling a MVC2 partial view using jquery returns empty string problem

  - by Jason

  I have an issue where I have a partial view that returns some HTML to be displayed. Its called when something is clicked on the page using jquery. The problem is that no matter how I call it, i get back an empty string even though it reports success. This is happening to me using Chrome, going against my local machine. My controller looks like this: public ActionResult MyPartialView() { return PartialView(model); } I have tried jquery using .get(), .post() and .load() and all have the same results. Here is an example using .post(): $.post(url, function (data) { alert(data); }); The result always comes back as an empty string. I can navigate to the partial view in the browser manually and i get back the desired HTML. The URL I am using to call it I resolved fully so it looks like "http://localhost/controller/mypartialview" rather than using the relative path of "/controller/mypartialview" which I thought was the original problem. Any idea what may cause this?

  Read the article

• EF 4, POCO and AddOrUpdate

  - by Eric J.

  I'm trying to create a method on an EF 4 POCO repository called AddOrUpdate. The idea is that the business layer can pass in a POCO object and the persistence framework will add the object if it is new (not yet in the database), else will update the database (once SaveChanges() is called) with the new value. This is similar to some other questions I have asked about EF, but I'm only about 80% there in understanding this so please forgive partial duplication. The part I'm missing is how to update the object graph in my ObjectContext/associated ObjectSet for the passed-in business object once I have determined that the business object indeed already exists in the database (and now has been loaded thanks to TryGetObjectByKey). ApplyCurrentValues sounds sort of like what I want, but it only copies scalar values and doesn't seem intended to update the object graph in the ObjectContext/ObjectSet. Because of my particular use case I don't care about concurrency right now. public void AddOrUpdate(BO biz) { object obj; EntityKey ek = Ctx.CreateEntityKey(mySetName, biz); bool found = Ctx.TryGetObjectByKey(ek, out obj); if (found) { // How do I do what this method name implies? Biz is a parent with children. mySet.TellTheSetToUpdateThisObject(biz); } else { mySet.AddObject(biz); } Ctx.DetectChanges(); }

  Read the article

• nhibernate : a different object with the same identifier value was already associated with the sessi

  - by frosty

  I am getting the following error when i tried and save my "Company" entity in my mvc application a different object with the same identifier value was already associated with the session: 2, of entity: I am using an IOC container private class EStoreDependencies : NinjectModule { public override void Load() { Bind<ICompanyRepository>().To<CompanyRepository>().WithConstructorArgument("session", NHibernateHelper.OpenSession()); } } My CompanyRepository public class CompanyRepository : ICompanyRepository { private ISession _session; public CompanyRepository(ISession session) { _session = session; } public void Update(Company company) { using (ITransaction transaction = _session.BeginTransaction()) { _session.Update(company); transaction.Commit(); } } } And Session Helper public class NHibernateHelper { private static ISessionFactory _sessionFactory; const string SessionKey = "MySession"; private static ISessionFactory SessionFactory { get { if (_sessionFactory == null) { var configuration = new Configuration(); configuration.Configure(); configuration.AddAssembly(typeof(UserProfile).Assembly); configuration.SetProperty(NHibernate.Cfg.Environment.ConnectionStringName, System.Environment.MachineName); _sessionFactory = configuration.BuildSessionFactory(); } return _sessionFactory; } } public static ISession OpenSession() { var context = HttpContext.Current; //.GetCurrentSession() if (context != null && context.Items.Contains(SessionKey)) { //Return already open ISession return (ISession)context.Items[SessionKey]; } else { //Create new ISession and store in HttpContext var newSession = SessionFactory.OpenSession(); if (context != null) context.Items[SessionKey] = newSession; return newSession; } } } My MVC Action [HttpPost] public ActionResult Edit(EStore.Domain.Model.Company company) { if (company.Id > 0) { _companyRepository.Update(company); _statusResponses.Add(StatusResponseHelper.Create(Constants .RecordUpdated(), StatusResponseLookup.Success)); } else { company.CreatedByUserId = currentUserId; _companyRepository.Add(company); } var viewModel = EditViewModel(company.Id, _statusResponses); return View("Edit", viewModel); }

  Read the article

• jQuery WCF Service MVC2 VS2010 .NET 4.0 call with parameters fails

  - by AUSTX_RJL

  In Visual Studio 2010 I created a new Ajax enabled WCF Service [ServiceContract(Namespace = "TestWCFAjax.Bridge")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class Bridge { [OperationContract] public string DoWork() { return "jQuery WCF call without parameters from MVC2 works." ; } [OperationContract] public string DoWork1(string parm) { return parm + " jQuery WCF call with parameters from MVC2 fails"; } In the Home Controllers Index.aspx view I add the jQuery: function CallWebMethod() { $.ajax( { type: "POST", contentType: "application/json; charset-utf-8", url: "http://localhost:1452/Bridge.svc/DoWork1", dataType: "json", data: '{"parm":"test"}', error: jqueryError, success: function (msg) { alert("back"); var divForResult = document.getElementById("test"); divForResult.innerHTML = "Result: <b>" + msg.d + "</b>"; } }) } function jqueryError(request, status, error) { alert(request.responseText + " " + status + " " + error); } (using the built-in Web Server in VS 2010) When I call DoWork, it works fine. When I call DoWork1 it always returns "error undefined" and the WCF call never happens. I've tried every combination of: [WebInvoke(Method = "POST", BodyStyle = WebMessageBodyStyle.WrappedRequest, ResponseFormat = WebMessageFormat.Json, RequestFormat = WebMessageFormat.Json)] I can think of and it does not help. I must be missing something simple. There are MANY posting about how to make this work, and other than the "no parameter" version, none have worked for me. Can anyone post a sample MVC2 jQuery 1.4 .NET 4.0 WCF VS2010 working sample or spot the likely error? Thanks.

  Read the article

• JQuery BlockUI with UpdatePanel Viewstate Issue

  - by Chris

  I am using BlockUI to show a modal. Within the blocked modal I have an update panel. Within the update panel I have a textbox and a button that submits the content back to the server. Everything works fine up to this point (the blockUI is called, the modal appears, and the button performs the postback). However, when the button's click event is fired the value for the textbox is consistently empty even if text was entered. When the update panel updates the textbox shows up blank. It appears that this may be some sort of viewstate issue and I haven't turned off viewstate. <a href="javascript:$.blockUI({ message: $('#divTest') });">SHOW MODAL</a> <div id="divTest" style="display: none;"> <asp:UpdatePanel ID="upTest" UpdateMode="Conditional" runat="server"> <ContentTemplate> <asp:TextBox ID="txtTestVS" runat="server" /><br /> <asp:Button ID="cmdTest" Text="TEST" OnClick="cmdTest_Click" UseSubmitBehavior="false" runat="server" /> </ContentTemplate> </asp:UpdatePanel> SERVER-SIDE: protected void cmdTest_Click(object sender, EventArgs e) { string x = txtTestVS.Text; } String "x" always equal "".

  Read the article

• Problem with ScriptManager.RegisterStartupScript in WebControl nested in UpdatePanel

  - by Chris

  Hello, I am having what I believe should be a fairly simple problem, but for the life of me I cannot see my problem. The problem is related to ScriptManager.RegisterStartupScript, something I have used many times before. The scenario I have is that I have a custom web control that has been inserted into a page. The control (and one or two others) are nested inside an UpdatePanel. They are inserted onto the page onto a PlaceHolder: <asp:UpdatePanel ID="pnlAjax" runat="server"> <ContentTemplate> <asp:PlaceHolder ID="placeholder" runat="server"> </asp:PlaceHolder> ... protected override void OnInit(EventArgs e){ placeholder.Controls.Add(Factory.CreateControl()); base.OnInit(e); } This is the only update panel on the page. The control requires some initial javascript be run for it to work correctly. The control calls: ScriptManager.RegisterStartupScript(this, GetType(), Guid.NewGuid().ToString(), script, true); and I have also tried: ScriptManager.RegisterStartupScript(Page, Page.GetType(), Guid.NewGuid().ToString(), script, true); The problem is that the script runs correctly when the page is first displayed, but does not re-run after a partial postback. I have tried the following: Calling RegisterStartupScript from CreateChildControls Calling RegisterStartupScript from OnLoad / OnPreRender Using different combinations of parameters for the first two parameters (in the example above the Control is Page and Type is GetType(), but I have tried using the control itself, etc). I have tried using persistent and new ids (not that I believe this should have a major impact either way). I have used a few breakpoints and so have verified that the Register line is being called correctly. The only thing I have not tried is using the UpdatePanel itself as the Control and Type, as I do not believe the control should be aware of the update panel (and in any case there does not seem to be a good way of getting the update panel?). Can anyone see what I might be doing wrong in the above? Thanks :)

  Read the article

< Previous Page | 374 375 376 377 378 379 380 381 382 383 384 385  | Next Page >