Search Results

Search found 51790 results on 2072 pages for 'long running'.

Page 379/2072 | < Previous Page | 375 376 377 378 379 380 381 382 383 384 385 386  | Next Page >

  • Volume group disappeared, LVs still available

    - by Ben
    I've run into an issue with my KVM host which runs VMs on a LVM volume. As of last night the logical volumes are no longer seen as such (I can't create snapshots of them even though I have been for months now). Running any scans all result in nothing being found: [root@apollo ~]# pvscan No matching physical volumes found [root@apollo ~]# vgscan Reading all physical volumes. This may take a while... No volume groups found root@apollo ~]# lvscan No volume groups found If I try restoring the VG conf backup from /etc/lvm/backups/vg0 I get the following error: [root@apollo ~]# vgcfgrestore -f /etc/lvm/backup/vg0 vg0 Couldn't find device with uuid 20zG25-H8MU-UQPf-u0hD-NftW-ngsC-mG63dt. Cannot restore Volume Group vg0 with 1 PVs marked as missing. Restore failed. /etc/lvm/backups/vg0 has the following for the physical volume: physical_volumes { pv0 { id = "20zG25-H8MU-UQPf-u0hD-NftW-ngsC-mG63dt" device = "/dev/sda5" # Hint only status = ["ALLOCATABLE"] flags = [] dev_size = 4292870143 # 1.99902 Terabytes pe_start = 384 pe_count = 524031 # 1.99902 Terabytes } } fdisk -l /dev/sda shows the following: [root@apollo ~]# fdisk -l /dev/sda Disk /dev/sda: 6000.1 GB, 6000069312512 bytes 64 heads, 32 sectors/track, 5722112 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000188b7 Device Boot Start End Blocks Id System /dev/sda1 2 32768 33553408 82 Linux swap / Solaris /dev/sda2 32769 33280 524288 83 Linux /dev/sda3 33281 1081856 1073741824 83 Linux /dev/sda4 1081857 3177984 2146435072 85 Linux extended /dev/sda5 1081857 3177984 2146435071+ 8e Linux LVM The server is running a 4 disk HW RAID10 which seems perfectly healthy according to megacli and smartd. The only odd message in /var/log/messages is the following which shows up every couple of hours: Jun 10 09:41:57 apollo udevd[527]: failed to create queue file: No space left on device Output of df -h [root@apollo ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 1016G 119G 847G 13% / /dev/sda2 508M 67M 416M 14% /boot Does anyone have any ideas what to do next? The VMs are all running fine at the moment apart from not being able to snapshot them. Updated with extra info It's not a lack of inodes: [root@apollo ~]# df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda3 67108864 48066 67060798 1% / /dev/sda2 32768 47 32721 1% /boot pvs, vgs & lvs either output nothing or "No volume groups found".

    Read the article

  • raspberry pi for web programming/development

    - by Mark Dee
    I'm into web development and my machine (AMD Phenom II, 8G RAM) is running Ubuntu 13.04. I love my current setup but I kinda miss some of Windows software like MSOffice or Adobe suites, and running on Virtualbox doesn't feel as snappy for me.... So I'm thinking of buying a new cheap machine where I would install Linux and do my development work there and have my current machine run Windows. I just found this thing called Raspberry pi which is really cheap and requires 12v only (I think) which makes it good for downloading stuff overnight. So, does it make sense to buy Raspberry pi, make it my primary dev machine, Windows being the secondary (for Adobe and browser testing of course)? Basically, I want to know if Raspberry pi meets the following requirements: It should run ArchLinux Sublime Text 3 python ruby nginx nodejs Deluge or Transmission (well, maybe just those, no need for videos and music players)

    Read the article

  • Processor always at max speed

    - by Pratyush Nalam
    I am running Windows 8 Pro on an Apple MacBook Pro 9,1 Mid 2012 15 inch non retina. It has a Core i7-3720 QM CPU @ 2.6 GHz. For the past few days, I have noticed that it is constantly running at max speed which is 2.59 GHz. Before, it used to run at 1.5 - 1.8 GHz on normal usage. And, the weirder thing is that CPU usage is minimal. Screenshot: So, what is the reason for this? And is it harmful?

    Read the article

  • Different file locations for http v https on IIS?

    - by Jeremy Morgan
    We have a server running IIS and have some folders running under https, but most are open. The problem I'm having is when someone is directed from a page in the secure section of the site, the relative link brings up https. For example: link to /pictures goes to http://www.mysite.com/pictures But if someone is on a secured part of the site https://www.mysite.com/shoppingcart And then clicks back to /pictures, they get https://www.mysite.com/pictures so the pictures directory is shown under https. My problem is, they get a 404 not found message when this happens. I could not find anything in the settings that would indicate that secured connections are pulling files from anywhere different than non-secured. If I type http or https on the main page of the site both come up fine. But if I try to add the https:// in a folder level, I get a 404. Any ideas why this might be happening?

    Read the article

  • FreeNX Server w/ nxagent 3.5 not able to create shadow sessions

    - by Jenna Whitehouse
    I am running a FreeNX server on Ubuntu 11.10 and am unable to do session shadowing. I get the authorization prompt, but the shadow client crashes after. The NX server log in the user's .nx directory is as follows: Error: Aborting session with 'Server is already active for display 3000 If this server is no longer running, remove /tmp/.X3000-lock and start again'. Session: Aborting session at 'Mon Oct 1 14:26:44 2012'. Session: Session aborted at 'Mon Oct 1 14:26:44 2012'. This then deletes the lock file, which is the lock file for the initial Unix session and crashes out. Everything works for a normal session, and shadowing works up to the authorization prompt. I am using this software: Ubuntu 11.10 freenx-server 0.7.3.zgit.120322.977c28d-0~ppa11 nx-common 0.7.3.zgit.120322.977c28d-0~ppa11 nxagent 1:3.5.0-1-2-0ubuntu1ppa8 nxlibs 1:3.5.0-1-2-0ubuntu1ppa8 Any help is appreciated, thanks!

    Read the article

  • CentOS 7: PHP high CPU usage

    - by HTF
    I've migrated Observium monitoring platform from CentOS 6.5 to CentOS 7 and I've noticed high CPU usage mostly caused by PHP, the CPU load increase when pooling script is running (poller-wrapper.py). Both VMs are running on the same physical host (KVM hypervisor) with exactly the same spec. I also tested this with a simple PHP benchmark script and CentOS 7 is slower - is it strictly related to PHP version (5.4.30 vs 5.4.16)? CentOS 6.5 [root@centos6:~]# php -f bench.php -------------------------------------- | PHP BENCHMARK SCRIPT | -------------------------------------- Start : 2014-08-19 22:26:34 PHP version : 5.4.30 Platform : Linux -------------------------------------- test_math : 1.610 sec. test_stringmanipulation : 1.416 sec. test_loops : 0.822 sec. test_ifelse : 0.729 sec. -------------------------------------- Total time: : 4.577 sec. CentOS 7 [root@centos7:~]# php -f bench.php -------------------------------------- | PHP BENCHMARK SCRIPT | -------------------------------------- Start : 2014-08-19 22:27:58 PHP version : 5.4.16 Platform : Linux -------------------------------------- test_math : 2.117 sec. test_stringmanipulation : 1.246 sec. test_loops : 1.174 sec. test_ifelse : 0.752 sec. -------------------------------------- Total time: : 5.289 sec. CPU usage increased right after migration:

    Read the article

  • Can two users both control a third machine simultaneously using Synergy?

    - by Reason
    I've been a Synergy user for some time now, as I use a PC on the left side of my Mac. My girlfriend and I both have our desks on each side of the other, and we'd like to know if it were possible for the both of us to control the PC in the middle, with our own separate mouse & keyboards. Here's a crude drawing of our setup (1) her pc (2) my pc (3) my mac Currently, 3 is running a synergy server, and 2 is running the client. But like I said, I'm wondering if there's a way for 1 & 3 to both control 2 with their own mouse and keyboard. I'd ~love~ to have it set up where we could go even farther, and have both of our mice & keyboards able to control all 3 computers at the same time, for moments when we need to click or press keys for each other. But that seems a little too much to ask! Any thoughts?

    Read the article

  • Why is my new Phenom II 965 BE not significantly faster than my old Athlon 64 X2 4600+?

    - by Software Monkey
    I recently rebuilt my 5 year old computer. I upgraded all core components, in particular from an Athlon 64 X2 4600+ at 2.4 GHz with DDR2 800 to a Phenom II 965 BE (quad core) at 3.6 GHz with DDR3 1333 (actually 1600, but testing consistently detected memory errors at 1600). The motherboard is also much newer and better. The HDD's (x3), DVD writer and card reader are the same. The BIOS memory config is auto-everything except the base timing which I overrode to 1T instead of 2T. The BIOS CPU multiplier is slightly over-clocked to 3.6 GHz from the stock 3.4 GHz. I noticed compiling Java is slower than I expected. As it happens I have some (single-threaded) Java pattern-matching code which is CPU and memory bound and for which I have performance numbers recorded on a number of hardware platforms, including my old system. So I did a test run on the new equipment and was stunned to find that the numbers are only slightly better than my old system, about 25%. The data set it is operating on is a 148,975 character array, which should easily fit in caches, but in any event the new CPU has larger caches all around. The system was, of course, otherwise idle for the test and the test run is a timed 10 seconds to eliminate scheduling anomalies. A long while ago, when I upgraded only memory from DD2 667 to DDR2 800 there was no change in performance of this test, which subjectively supports that the test cycle does not need to (significantly) access main memory, but yes it is creating and garbage collecting a large number of objects in the process of this test (low millions of matches are found for the pattern set). I am about 99.999% certain the code hasn't changed since I last ran it on 2009-03-17 - but I can't easily retest the old hardware, because it is currently in pieces on my work-bench waiting to be built into a new computer for my kids. Note that Windows (XP) reports a CPU speed of 795 MHz unless I have some thing running. With stuff running it seems to jump all over the place each time I use ALT-Pause to display the system properties, everywhere from 795 MHz to 3.4 Ghz. So why might my shiny new hardware under-performing so badly? EDIT: The old memory was Mushkin DDR2 800 with timings set for auto which should have been 5-5-5-12. The new memory is Corsair DDR3 1600, running at 1333 with timings also auto which are 9-9-9-21. In both cases they are a paired set of dual channel DIMMs. I was waiting to ensure my system was stable before tweaking with memory timings.

    Read the article

  • How can I find a computer on my network that is doing mass mailings?

    - by Alex Ciarlill
    I was notified by my isp that one of my machines is sending out spam. This happened about 3 months ago on windows machine running cygwin that was hacked due to an SSH vuln. The hackers setup IIS and SMTP. I cleared out the machine and all the services are disabled so I think that machine is okay I am wondering if there is any other way to identify which machine it could be coming from? The ISP has NO useful information such as source port, destination port, destination IP... nothing. I am running DD-WRT on my router, Windows 7 PC and a Windows XP PC.

    Read the article

  • Sony Bravia KDL-32L5000 PC resolution slightly off.

    - by user18818
    Hi, I have a PC running two Nvidia 8500 GTs in SLI mode and I am trying to use my TV in dual mode. When I switch the TV to PC the screen is nearly centered with a slight offset. All resolutions are effected from 800x600 all the way up to the TVs native 1360x768. I have tried with SLI on and off and have PhysX turned off as well as I thought that might have an effect. I am running Windows XP 64-bit SP2 DirectX ver 9.0c Nvidia driver version 181.22 Any other information please let me know. Thanks in advance.

    Read the article

  • How do hdparm's -S and -B options interact?

    - by user697683
    These two options seem confusing. For example: according to the man page -B 254 "does not permit spin-down". However, testing with -B 254 -S 1 the drive does spin down after 5 seconds. -B Query/set Advanced Power Management feature, if the drive supports it. A low value means aggressive power management and a high value means better performance. Possible settings range from values 1 through 127 (which permit spin-down), and values 128 through 254 (which do not permit spin-down). The highest degree of power management is attained with a setting of 1, and the highest I/O performance with a setting of 254. A value of 255 tells hdparm to disable Advanced Power Management altogether on the drive (not all drives support disabling it, but most do). -S Put the drive into idle (low-power) mode, and also set the standby (spindown) timeout for the drive. This timeout value is used by the drive to determine how long to wait (with no disk activity) before turning off the spindle motor to save power. Under such circumstances, the drive may take as long as 30 seconds to respond to a subsequent disk access, though most drives are much quicker. The encoding of the timeout value is somewhat peculiar. A value of zero means "timeouts are disabled": the device will not automatically enter standby mode. Values from 1 to 240 specify multiples of 5 seconds, yielding timeouts from 5 seconds to 20 minutes. Values from 241 to 251 specify from 1 to 11 units of 30 minutes, yielding timeouts from 30 minutes to 5.5 hours. A value of 252 signifies a timeout of 21 minutes. A value of 253 sets a vendor-defined timeout period between 8 and 12 hours, and the value 254 is reserved. 255 is interpreted as 21 minutes plus 15 seconds. Note that some older drives may have very different interpretations of these values.

    Read the article

  • Database modularity with EBS volumes

    - by Eclyps19
    I would like to add modularity to my websites on EC2 instances by encapsulating the site files and the mysql files in their own EBS volumes. The end result that I'm going for is the ability to quickly mount a volume or two to different servers running the same AMI (for testing/development/emergency maintenance, etc), as well as maintain separate snapshots of each. I'm able to do this fairly easily with a single database by symlinking my mounted database EBS to the appropriate places (/var/lib/mysql, /etc/my.cnf, /var/log/mysqld.log), but I'm not sure if it would even be possible be possible to have multiple databases on different EBS volumes running concurrently. Example: /website1/www.website.com /database1/ /website2/www.otherwebsite.com /database2/ Could anybody shed some light on this for me? Is it possible? Is it a bad idea? Thanks.

    Read the article

  • Why is APC (PHP Accelerator) Only caching apc.php?

    - by amvx
    I installed PHP5,APC and XDEBUGGER with the install script found here: Dreamhost PHP+APC Install Instructions/Script All systems seem to be working... except... I added the apc.php to see the caching stats of APC (GUI Interface), and it showed that only apc.php file was being cached despite having installed wordpress and prestashop under the same domain, installing and running those php scripts. I wonder if I did something wrong... but my php5 is running as a cgi/fastcgi. I think I might have read somewhere about there being some issue with this. Not sure. Any help is of coursed appreciated.

    Read the article

  • Looking for an application to record audio and video on a linux "embedded" device

    - by Luke404
    I am working with a linux x86 device with limited CPU resources (as a prototype we just use a pentium-m netbook). We'd like to record video from one V4L2 device (we'll probably end up using just USB Video Class devices like all modern webcams) and one audio stream from an ALSA source. The thing will not have screen and keyboard, and obviously no X11 environment. Goals are: do as little work as possible to cope with little cpu resources - for example I'd like to record video in the native MJPEG I get out of the UVC devices encoding audio to MPEG3 Layer-2 (aka mp2) is ok since it let us save a lot of space (compared to raw pcm samples) and does use little cpu power I don't mind loosing some video frames here and there (UVC devices do that) as long as I can get audio and video streams syncronized not require user input to start the thing (a python script takes care of initialization, startup, shutdown, etc...) be able to open the resulting files for postprocessing without too much effort (ie, if mplayer or vlc can play it, it's fine) So far the only app I found that could be started from command line and record V4L2 video + ALSA audio is mencoder but I'm having some difficulties with it. It should be able to do that but I cannot record audio and video together - just one of the two. And if I use two different processes to record to two different files I have no means to get them in sync (audio is more or less always correct, but video framerate will vary over time and it seems to lack timestamps to correctly play it back to the correct time). Long story short, how do you record an unconverted MJPEG stream (from an UVC device) and an audio stream (from an ALSA device, possibly encoding to any standard format) using a command line tool, to a single file (MPEG or any other container), keeping audio and video in sync?

    Read the article

  • How to set CA cert file for LDAP backend server in smbpasswd configuration

    - by hayalci
    I am having a problem with smbpasswd, an LDAP backend server and SSL/TLS certificates. The client machine that I run smbpasswd on is a Debian Etch machine, and the Ldap server is Sun DS running on Solaris. All the following occurs on the client. When I disable SSL, by setting "ldap ssl = no" in smb.conf, the smbpasswd program works without errors. When I set "ldap ssl = start tls", the following messages are printed by smbpasswd and there is a long timeout period before any password is asked by it Failed to issue the StartTLS instruction: Connect error Connection to LDAP server failed for the 1 try! ..... long delay ..... New SMB password: Retype new SMB password: Failed to issue the StartTLS instruction: Connect error Connection to LDAP server failed for the 1 try! smbpasswd: /tmp/buildd/openldap2-2.1.30/libraries/liblber/io.c:702: ber_get_next: Assertion `0' failed. Aborted I conducted some tests with "ldapsearch -ZZ". It was not working at first, but after I added the TLS_CACERT line to /etc/ldap/ldap.conf, /etc/libnss-ldap.conf and /etc/pam_ldap.conf, it started working. So relevant TLS sections in all those files are: ssl start_tls tls_checkpeer no tls_cacertfile /path/to/ca-root.pem TLS_CACERT /path/to/ca-root.pem But the smbpasswd program continued giving the error. I tried creating /etc/smbldap-tools/smbldap.conf file with following content (after consulting debian docs for smbldap-tools package) But as I see, smbpasswd comes with samba-common package and does not use the configuration for smbldap-tools utilities. verify="optional" cafile="/path/to/ca-root.pem" My question is: How can I set which SSL CA Certificate is used by smbpasswd program ?

    Read the article

  • redirect on a Domino HTTP server?

    - by oidsman
    Simple question but:- We have a server running Domino Http server on port 80. We have another apache server running on 8081. We want to set a DNS entry (say 'Things') to point to a page on the 8081 server. As I see it we need to do some kind of redirect on the Domino server to say that any traffic from hostname 'Things' gets a redirect to "http://server:8081/content/". So, in summary, if I type in "http://Things" on my browser I get redirected to "http://server:8081/content/" Does anyone know how to do this on the Domino Http server? Thanks in advance for your help!

    Read the article

  • X11 Forwarding works on Windows with Xming and Putty, but not with ssh command line

    - by seaders
    I have a micro Amazon instance the I want to use for testing and everything is going fine until the title. If I set up all the info in PuTTy, open it up and run 'xclock', all runs perfectly and it opens on Xming on my local desktop. If, however, I run ssh xxxxxxx.amazonaws.com xclock I get Error: Can't open display: If I run either of ssh xxxxxxx.amazonaws.com -X DISPLAY=localhost:0:0 xclock ssh xxxxxxx.amazonaws.com -Y DISPLAY=localhost:0:0 xclock I get the same again, but just after about a 30 second delay. In .ssh/config in Windows, I do have ForwardX11 yes set, and I really can't think of anything more to get this working. The fact that PuTTy is working perfectly, not no matter what I do on the command line, I get absolutely no joy is driving me crazy. Can I even see the commands PuTTy is running somewhere, to see if it's doing some extra magic? The ssh I'm running in Windows is MinGW32's.

    Read the article

  • RAID Read/Write Speed Gradually Slows

    - by Nalandial
    This is actually a server at home, but I felt it was sufficiently complicated as to not have it on SuperUser and could easily apply to a professional situation. I have a file server running Debian (Lenny 5.0.4), and it has an XFS LVM on top of a RAID 5 with the OS drive separate from the RAID. It's also running apache, samba, and postgresql. Side note: before anyone asks, I'm using RAID5 because I get more bang for the buck on raw drive space, and still have some fault tolerance. When the box is started (via shutdown or reboot) reading/writing to it's samba share maxes out the gigabit network connection. Over time, this slowly degrades eventually becoming < 10MB/s; however, when rebooted the speed returns to maxing out the connection. Why is this happening, and is there a way to 'clear' out whatever's causing it without taking the server down? Thanks in advance!

    Read the article

  • How to transfer files between a remote Linux machine and a local Windows machine?

    - by Lazer
    I need to transfer files/folders between a remote machine running Linux and my local machine running Windows XP. I usually access the remote machine through ssh, and sometimes use VNC sessions. What is the easiest way to transfer a file from the remote machine to my local machine and vice versa? I think ftp should be the solution. Is there a better way? If ftp is a good option, how do I initiate the transfer? Do I need to setup ftp servers on both the machines and then transfer? What exactly needs to be done?

    Read the article

  • MacBook Pro - 72k vs 54k rpm drives - Heat and Noise

    - by webworm
    I am looking at a new 15" MacBook Pro for development purposes. I am planning to run a Virtual Machine for about 50% of my work (Windows 7 x64, IIS, SQL Server, and VS 2010). The upgrade from a 54000 rpm drive to a 72000 rpm is only $45. From what I understand the faster rotational speed of the 72000 rpm drive will help virtual machine performance. However, I am concerned that additional heat and fan noise might be an issue. I will be running mostly on A/C power so decreased battery life is not a major concern for me. Since I would be running with a Core i7 processor which gives off a fair amount of heat already I was wondering if it might be best to stay at 54000 rpm for the hard drive. What do you all think? Thanks!

    Read the article

  • Bridging VirtualBox over OpenVPN TAP adapter on Windows

    - by Sean Edwards
    I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

    Read the article

  • MySQL: "UPDATE command denied to user ''@'localhost'"

    - by Uncle Nerdicus
    For some reason when I installed MySQL on my machine (a Mac running OS X 10.9) the 'root' MySQL account got messed up and I don't have access to it, but I do have access to the standard MySQL account 'sean@localhost' which I use to log into phpMyAdmin. I am trying to reset the 'root' password by starting the mysqld daemon using the command mysqld --skip-grant-tables and then running the following lines in the mysql shell. mysql> UPDATE mysql.user SET Password=PASSWORD('MyNewPass') -> WHERE User='root'; mysql> FLUSH PRIVILEGES; Problem is when I try to run that MySQL string the daemon spits back a ERROR 1142 (42000): UPDATE command denied to user ''@'localhost' for table 'user' as if I didn't use the -u argument when I started the mysql shell, either though I did. Any help is muchly appreciated as I am lost at this point. :/

    Read the article

  • Strange email coming from/to my computer

    - by Micah
    I'm running smtp4dev on my machine to trap anything going in/out of my computer on port 25 for testing purposes. Every so often this email gets trapped and I have no idea what it's from. I have Microsoft Security Essentials running on my machine and it hasn't identified and viruses or anything so I'm not sure what's going on. Here's the content of the message: Received: from [125.180.72.4] by 173.162.7.130 SMTP id O2Ncv62Ghig1vR for <[email protected]>; Fri, 24 Jun 2011 20:36:15 +0200 Received: from [125.180.72.4] by 173.162.7.130 SMTP id O2Ncv62Ghig1vR for <[email protected]>; Fri, 24 Jun 2011 20:36:15 +0200 Message-ID: <[email protected]> From: "" <[email protected]> To: <[email protected]> Subject: BC_173.162.7.130 Date: Fri, 24 Jun 11 20:36:15 GMT MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000D_01C2CC60.49F4EC70"

    Read the article

  • Squid traffic tunneled through VPN

    - by NerdyNick
    So what I'm trying to do is have a Squid Proxy run on 1 machine along side a VPN connection. What I want to happen is all traffic running though the Squad Proxy would run though the VPN for its outbound. ie Desktop - (Squid Proxy - VPN) The goal is to allow my desktop selective tunneling through the VPN. So that Instant Messaging and the like that do not need to run through the VPN can go through my normal traffic. Typically I would go though a SSH Proxy but currently am forced to use VPN to gain entry into the office, and a Squid proxy seemed like it might work out the easiest for what I am needing. EDIT Realize I forgot to actually state what problem I'm running into. I have the Squid setup and verified it works, but once I connect to the VPN. All requests to Squid get accepted but Squid is unable to make the request over the VPN. So the client ends up just sitting there.

    Read the article

  • Issue in extending webapplication sharepoint

    - by GHIYA
    I have extended a webapplication in a farm. main server vsmoss1 where i did vsmoss1 ->webapplication(80) vm.com -> extended web app(of above one)anonymous WFE server name vsmoss2 WFE server name vsmoss3 i have load balanced it to got to vsmoss2 and vsmoss3 when someone hits vm.com when i hit vm.com it works fine without authentication(shows content query webpart also on my page) I know there is no need to do that but when I hit vsmoss2 and vsmoss3 it shows me error on my content query webpart ....any solution for that? Finding this strange tried this : I closed both extended webapp in vsmoss2 and vsmoss3 result: site is up and running but this time with authentication I closed both extended and main webapplication site in vsmoss2 and vsmoss3 is down I closed main webapplication in vsmoss2 and vsmoss3 site is up and running without authentication Anyone is having idea why this is showing behaviour like this...?

    Read the article

< Previous Page | 375 376 377 378 379 380 381 382 383 384 385 386  | Next Page >