Search Results

Search found 80052 results on 3203 pages for 'data load performance'.

Page 38/3203 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• Get a file from a load balanced server in Windows Server

  - by Leandro

  I've a load balanced server on production environment for my application. The server is on Windows Server 2008 R2. I'm running a web application that creates and save a file into a folder on the web path. So I need to create a job that copy this file into another server. The main idea is that a file watcher checks for the file and then copy it instantly. But how can I know in what server it's the file? Please avoid "why you don't" answers to get a directly answer, if it's someone.

  Read the article

• Utilize two gateways on the same network same interface with load balancing

  - by RushPL

  My setup is two ISPs on a single interface and single network. I can either set my default gateway to 192.168.0.1 or 192.168.1.250 and either work. My desire is to utilize both of them with some load balancing. I have tried to follow the advice given in here http://serverfault.com/a/96586 #!/bin/sh ip route show table main | grep -Ev '^default' \ | while read ROUTE ; do ip route add table ISP1 $ROUTE done ip route add default via 192.168.1.250 table ISP1 ip route add default via 192.168.0.1 table ISP2 iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A PREROUTING -j MARK --set-mark 10 iptables -t mangle -A PREROUTING -m statistic --mode random --probability 0.5 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -j CONNMARK --save-mark Now then I do "traceroute somehost" repeatedly I can only get route through my default route which is 192.168.1.250. Shouldn't the packets change routes in a random manner? How to debug it?

  Read the article

• apache and ajp performance

  - by user12145

  I have an apache sitting in front of two tomcat app servers(one on the same physical server, the other on a different one) that does time consuming work(0.5 sec to 10sec per request). The apache http server is getting killed by an average of 1 to 2 concurrent requests per second. both Server spec is about 2GB of RAM. Is there a way to optimize apache to handle the load? any advise is welcome. BalancerMember ajp://localhost:8009/xxxxxx BalancerMember ajp://XXX.XX.XXX.XX:8009/xxxxxx I keep getting the following in apache2.2 log: [Mon Dec 28 00:31:02 2009] [error] ajp_read_header: ajp_ilink_receive failed [Mon Dec 28 00:31:02 2009] [error] (120006)APR does not understand this error code: proxy: read response failed from 127.0.0.1:8009 (localhost)

  Read the article

• apache, shibboleth, load balancing aliase, ssl

  - by Nikolaidis Fotis

  Good morning folks Could you give me a bit of help with the following problem ? I have a dns load balancing mechanism and an alias (hostAlias) which may point to host01, or host02 I want to configure apache and shibboleth to work with that alias. What happens is ... User types : https://hostAlias (it points to host01) apache host01 : redirect to shibboleth shibboleth host01 : redirect to **https://hostAlias.cern.ch/Shibboleth.sso/ADFS** Now, there are two cases. Either this time hostAlias will point again to host01 , or it will point to host02. If it points to host02, host01 will not get the anwser and the authentication fails. Also, about ssl certificates, I guess that each host will need its own certificate. right ? Should I need a certificate with DNS aliases ? Thanks in advance !

  Read the article

• Load Testing Linux Virtual Server

  - by Anubhav Agarwal

  I have configured a Linux virtual network with following configuration 172.17.6.112- VIP 172.17.6.111- Linux Director | |----------172.17.6.113 --- Real Server 1 |----------172.17.6.114 --- Real Server 2 I am using direct routing technique. I am unable to test my LVS network. Are there some good scripts/softwares available for load testing. I am running apache2.0 service on them. I came across with testlvs on the internet but am unable to understand its documentation. Are there more simpler ones I want to test the response time of server using various scheduling algorithms .

  Read the article

• New CentOS/cPanel servers showing high load averages at idle

  - by Jax

  I have taken delivery of two identically specced CentOS/cPanel servers, showing the same behaviour of a resting load average of 1.30, 1.21, 1.16 and yet the CPU is sitting 100% idle. Hardware: Xeon(R) CPU E3-1270 4GB RAM Behavior:- top shows CPU 99.9% idle virtually no disk IO Some command output :- uname -a Linux server.myserver.com 2.6.18-308.4.1.el5PAE #1 SMP Tue Apr 17 17:47:38 EDT 2012 i686 i686 i386 GNU/Linux top top - 10:37:50 up 1:47, 1 user, load average: 1.28, 1.20, 1.17 Tasks: 199 total, 1 running, 198 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 99.9%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 4125104k total, 438764k used, 3686340k free, 25788k buffers Swap: 2096440k total, 0k used, 2096440k free, 291080k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2160 640 552 S 0.0 0.0 0:00.89 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/2 9 root 35 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 14 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/4 15 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/4 16 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/5 18 root 38 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/5 19 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/5 20 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/6 21 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/6 22 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/6 23 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/7 24 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/7 25 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/7 26 root 10 -5 0 0 0 S 0.0 0.0 0:06.42 events/0 27 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/1 28 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/2 29 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/3 30 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/4 31 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/5 32 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/6 33 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/7 34 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 khelper 35 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kthread 45 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/0 46 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/1 47 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/2 48 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/3 49 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/4 50 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/5 51 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/6 52 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/7 53 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kacpid 189 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/0 190 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/1 191 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/2 192 root 12 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/3 193 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/4 194 root 13 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/5 195 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/6 196 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 cqueue/7 199 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 khubd ps axf PID TTY STAT TIME COMMAND 1 ? Ss 0:00 init [3] 2 ? S< 0:00 [migration/0] 3 ? SN 0:00 [ksoftirqd/0] 4 ? S< 0:00 [watchdog/0] 5 ? S< 0:00 [migration/1] 6 ? SN 0:00 [ksoftirqd/1] 7 ? S< 0:00 [watchdog/1] 8 ? S< 0:00 [migration/2] 9 ? SN 0:00 [ksoftirqd/2] 10 ? S< 0:00 [watchdog/2] 11 ? S< 0:00 [migration/3] 12 ? SN 0:00 [ksoftirqd/3] 13 ? S< 0:00 [watchdog/3] 14 ? S< 0:00 [migration/4] 15 ? SN 0:00 [ksoftirqd/4] 16 ? S< 0:00 [watchdog/4] 17 ? S< 0:00 [migration/5] 18 ? SN 0:00 [ksoftirqd/5] 19 ? S< 0:00 [watchdog/5] 20 ? S< 0:00 [migration/6] 21 ? SN 0:00 [ksoftirqd/6] 22 ? S< 0:00 [watchdog/6] 23 ? S< 0:00 [migration/7] 24 ? SN 0:00 [ksoftirqd/7] 25 ? S< 0:00 [watchdog/7] 26 ? S< 0:06 [events/0] 27 ? S< 0:00 [events/1] 28 ? S< 0:00 [events/2] 29 ? S< 0:00 [events/3] 30 ? S< 0:00 [events/4] 31 ? S< 0:00 [events/5] 32 ? S< 0:00 [events/6] 33 ? S< 0:00 [events/7] 34 ? S< 0:00 [khelper] 35 ? S< 0:00 [kthread] 45 ? S< 0:00 \_ [kblockd/0] 46 ? S< 0:00 \_ [kblockd/1] 47 ? S< 0:00 \_ [kblockd/2] 48 ? S< 0:00 \_ [kblockd/3] 49 ? S< 0:00 \_ [kblockd/4] 50 ? S< 0:00 \_ [kblockd/5] 51 ? S< 0:00 \_ [kblockd/6] 52 ? S< 0:00 \_ [kblockd/7] 53 ? S< 0:00 \_ [kacpid] 189 ? S< 0:00 \_ [cqueue/0] 190 ? S< 0:00 \_ [cqueue/1] 191 ? S< 0:00 \_ [cqueue/2] 192 ? S< 0:00 \_ [cqueue/3] 193 ? S< 0:00 \_ [cqueue/4] 194 ? S< 0:00 \_ [cqueue/5] 195 ? S< 0:00 \_ [cqueue/6] 196 ? S< 0:00 \_ [cqueue/7] 199 ? S< 0:00 \_ [khubd] 201 ? S< 0:00 \_ [kseriod] 301 ? S 0:00 \_ [khungtaskd] 302 ? S 0:00 \_ [pdflush] 303 ? S 0:00 \_ [pdflush] 304 ? S< 0:00 \_ [kswapd0] 305 ? S< 0:00 \_ [aio/0] 306 ? S< 0:00 \_ [aio/1] 307 ? S< 0:00 \_ [aio/2] 308 ? S< 0:00 \_ [aio/3] 309 ? S< 0:00 \_ [aio/4] 310 ? S< 0:00 \_ [aio/5] 311 ? S< 0:00 \_ [aio/6] 312 ? S< 0:00 \_ [aio/7] 472 ? S< 0:00 \_ [kpsmoused] 551 ? S< 0:00 \_ [ata/0] 552 ? S< 0:00 \_ [ata/1] 553 ? S< 0:00 \_ [ata/2] 554 ? S< 0:00 \_ [ata/3] 555 ? S< 0:00 \_ [ata/4] 556 ? S< 0:00 \_ [ata/5] 557 ? S< 0:00 \_ [ata/6] 558 ? S< 0:00 \_ [ata/7] 559 ? S< 0:00 \_ [ata_aux] 569 ? S< 0:00 \_ [scsi_eh_0] 570 ? S< 0:00 \_ [scsi_eh_1] 571 ? S< 0:00 \_ [scsi_eh_2] 572 ? S< 0:00 \_ [scsi_eh_3] 573 ? S< 0:00 \_ [scsi_eh_4] 574 ? S< 0:00 \_ [scsi_eh_5] 593 ? S< 0:00 \_ [kstriped] 630 ? S< 0:00 \_ [kjournald] 655 ? S< 0:00 \_ [kauditd] 1860 ? S< 0:00 \_ [kmpathd/0] 1861 ? S< 0:00 \_ [kmpathd/1] 1862 ? S< 0:00 \_ [kmpathd/2] 1863 ? S< 0:00 \_ [kmpathd/3] 1864 ? S< 0:00 \_ [kmpathd/4] 1865 ? S< 0:00 \_ [kmpathd/5] 1866 ? S< 0:00 \_ [kmpathd/6] 1867 ? S< 0:00 \_ [kmpathd/7] 1868 ? S< 0:00 \_ [kmpath_handlerd] 1902 ? S< 0:00 \_ [kjournald] 1904 ? S< 0:00 \_ [kjournald] 1906 ? S< 0:00 \_ [kjournald] 1908 ? S< 0:00 \_ [kjournald] 1910 ? S< 0:00 \_ [kjournald] 2184 ? S< 0:00 \_ [iscsi_eh] 2288 ? S< 0:00 \_ [cnic_wq] 2298 ? S< 0:00 \_ [bnx2i_thread/0] 2299 ? S< 0:00 \_ [bnx2i_thread/1] 2300 ? S< 0:00 \_ [bnx2i_thread/2] 2301 ? S< 0:00 \_ [bnx2i_thread/3] 2302 ? S< 0:00 \_ [bnx2i_thread/4] 2303 ? S< 0:00 \_ [bnx2i_thread/5] 2304 ? S< 0:00 \_ [bnx2i_thread/6] 2305 ? S< 0:00 \_ [bnx2i_thread/7] 2330 ? S< 0:00 \_ [ib_addr] 2359 ? S< 0:00 \_ [ib_mcast] 2360 ? S< 0:00 \_ [ib_inform] 2361 ? S< 0:00 \_ [local_sa] 2371 ? S< 0:00 \_ [iw_cm_wq] 2381 ? S< 0:00 \_ [ib_cm/0] 2382 ? S< 0:00 \_ [ib_cm/1] 2383 ? S< 0:00 \_ [ib_cm/2] 2384 ? S< 0:00 \_ [ib_cm/3] 2385 ? S< 0:00 \_ [ib_cm/4] 2386 ? S< 0:00 \_ [ib_cm/5] 2387 ? S< 0:00 \_ [ib_cm/6] 2388 ? S< 0:00 \_ [ib_cm/7] 2398 ? S< 0:00 \_ [rdma_cm] 2684 ? S< 0:00 \_ [bond0] 2882 ? S< 0:00 \_ [bond1] 3195 ? S< 0:00 \_ [kondemand/0] 3197 ? S< 0:00 \_ [kondemand/1] 3198 ? S< 0:00 \_ [kondemand/2] 3199 ? S< 0:00 \_ [kondemand/3] 3200 ? S< 0:00 \_ [kondemand/4] 3201 ? S< 0:00 \_ [kondemand/5] 3202 ? S< 0:00 \_ [kondemand/6] 3203 ? S< 0:00 \_ [kondemand/7] 688 ? S<s 0:00 /sbin/udevd -d 2425 ? S<Lsl 0:00 iscsiuio 2432 ? Ss 0:00 iscsid 2434 ? S<Ls 0:00 iscsid 3061 ? S<sl 0:00 auditd 3063 ? S<sl 0:00 \_ /sbin/audispd 3121 ? Ss 0:00 syslogd -m 0 3124 ? Ss 0:00 klogd -x 3220 ? Ss 0:00 irqbalance 3278 ? Ss 0:00 dbus-daemon --system 3324 ? Ss 0:00 /usr/sbin/acpid 3337 ? Ss 0:00 hald 3338 ? S 0:00 \_ hald-runner 3345 ? S 0:00 \_ hald-addon-acpi: listening on acpid socket /var/run/acpid.socket 3349 ? S 0:00 \_ hald-addon-keyboard: listening on /dev/input/event1 3360 ? S 0:00 \_ hald-addon-storage: polling /dev/sr0 3413 ? Ssl 0:00 automount 3435 ? Ssl 0:00 /usr/sbin/named -u named 3466 ? Ss 0:00 /usr/sbin/sshd 4072 ? Ss 0:00 \_ sshd: root@pts/0 4078 pts/0 Ss 0:00 \_ -bash 5436 pts/0 R+ 0:00 \_ ps axf 3484 ? Ss 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid 3500 ? SLs 0:00 ntpd -u ntp:ntp -p /var/run/ntpd.pid -g 3514 ? S 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/server.myserver.com.pid 3575 ? Sl 0:00 \_ /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --log-error=/var/lib/mysql/server.myserver.com.err --pid-fil 3687 ? Ss 0:00 /usr/sbin/exim -bd -q1h 3709 ? Ss 0:00 /usr/sbin/dovecot 3710 ? S 0:00 \_ dovecot-auth 3725 ? S 0:00 \_ pop3-login 3726 ? S 0:00 \_ pop3-login 3727 ? S 0:00 \_ imap-login 3728 ? S 0:00 \_ imap-login 3729 ? Ss 0:00 /usr/local/apache/bin/httpd -k start -DSSL 4326 ? S 0:00 \_ /usr/bin/perl /usr/local/cpanel/bin/leechprotect 4332 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4333 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4334 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4335 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4336 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4337 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4382 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4383 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 4384 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 5389 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 5390 ? S 0:00 \_ /usr/local/apache/bin/httpd -k start -DSSL 3741 ? Ss 0:00 pure-ftpd (SERVER) 3746 ? S 0:00 /usr/sbin/pure-authd -s /var/run/ftpd.sock -r /usr/sbin/pureauth 3759 ? Ss 0:00 crond 3772 ? Ss 0:00 /usr/sbin/atd 3909 ? S 0:00 cpsrvd (SSL) - waiting for connections 5435 ? Z 0:00 \_ [cpsrvd-ssl] <defunct> 3931 ? S 0:00 queueprocd - wait to process a task 3948 ? S 0:00 tailwatchd 3954 ? SN 0:00 cpanellogd - sleeping for logs 4003 ? Ss 0:00 ./nimbus /opt/nimsoft 4016 ? S 0:00 \_ nimbus(controller) 4053 ? Sl 0:00 \_ nimbus(spooler) 4066 ? S 0:00 \_ nimbus(hdb) 4069 ? S 0:00 \_ nimbus(cdm) 4070 ? S 0:00 \_ nimbus(processes) 4023 ? S 0:00 /usr/sbin/smartd -q never 4027 tty1 Ss+ 0:00 /sbin/mingetty tty1 4028 tty2 Ss+ 0:00 /sbin/mingetty tty2 4029 tty3 Ss+ 0:00 /sbin/mingetty tty3 4030 tty4 Ss+ 0:00 /sbin/mingetty tty4 4031 tty5 Ss+ 0:00 /sbin/mingetty tty5 4033 tty6 Ss+ 0:00 /sbin/mingetty tty6 4035 ttyS1 Ss+ 0:00 /sbin/agetty -h -L ttyS1 19200 vt100 vmstat 10 6 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 3718136 25684 257424 0 0 8 3 127 189 0 0 100 0 0 0 0 0 3718136 25700 257420 0 0 0 7 1013 1500 0 0 100 0 0 0 0 0 3718136 25700 257424 0 0 0 1 1013 1551 0 0 100 0 0 0 0 0 3718136 25700 257424 0 0 0 0 1012 1469 0 0 100 0 0 1 0 0 3712680 25716 257424 0 0 0 2 1013 1542 0 0 100 0 0 0 0 0 3718376 25740 257424 0 0 0 46 1017 1534 0 0 100 0 0 Can anyone advise me as to what is the cause of and how I may resolve this behaviour? A kernel/driver conflict perhaps? I don't see any processes in R or D state that might inflate the load averages artificially, I realise it may be considered low in an 8 thread system but its higher at idle than any normal behaviour I've previously come across. Thanks in advance for your time. Edit: iotop Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 26 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.29 % [events/0] 3205 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.10 % [kondemand/2] 3208 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kondemand/5] 3209 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kondemand/6] 3207 be/3 root 0.00 B/s 0.00 B/s 0.10 % 0.00 % [kondemand/4] 3210 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kondemand/7] 3227 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % irqbalance 3288 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [rpciod/1] 3287 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [rpciod/0] 3206 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kondemand/3] 3069 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % auditd 3070 be/2 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % audispd 655 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kauditd] 3619 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % automount 3 be/7 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [ksoftirqd/0] 3068 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % auditd 29 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [events/3] 4 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/0] 7 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/1] 10 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/2] 13 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/3] 16 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/4] 19 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/5] 22 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/6] 25 rt/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog/7] 27 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [events/1] 28 be/3 root 0.00 B/s 0.00 B/s 0.29 % 0.00 % [events/2] 30 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [events/4] 31 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [events/5] 32 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [events/6] 33 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [events/7] 34 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [khelper] 35 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kthread] 45 be/3 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kblockd/0]

  Read the article

• Deploying Sharepoint Features in a Load Balanced Environment

  - by Adam

  Last night we deployed a new set of Sharepoint features to a load balanced environment. For some reason the new features are on 1 box but are not showing in the sharepoint sites on the others. We have 4 servers and we deployed to them by pulling 1 server out of rotation, stopping the app pool and deploying our new code and the new features. Then we would fire it back up and add it to the rotation. For the remaining servers we would only remove the server from rotation, stop the app pool, and deploy the code, NOT the features, then fire it back up and add it to the rotation. Any thoughts on why the features are not showing up on the other servers? Also, any thoughts on forcing the features to show up? Thanks in advance.

  Read the article

• Amazon EC2 Elastic Load Balancing - strategy for zero downtime server restart

  - by Yoga

  I have 5 web servers (Apache/mod_perl) behind Amazon EC2 Elastic Load Balancing, when I deploy codes to the web servers, I am doing this.. For each machine, shutdown the Apache Update the code Start over the server and proceed to the next server I think when my server is shutdown, ELB will not distribute request to my server, but how about the request still serving? I think a better approach is Stop accepting new request from ELB Sleep for sometimes, shutdown web server only if all requests are responded Update the codes Start the server again But how to perform (1) and (2) from my local sever? Do I need to use AWS API? or other easy way to do it? Thanks.

  Read the article

• Avoid Windows Explorer to load complete executable file

  - by user13001

  On Windows Vista, when browsing to a network folder containing executables, Windows Explorer seems to load all the files completely just to be able to show the executable icon (the resource monitor indicates loads of traffic during the loading of the directory) On XP only a part of the file is loaded. Is there a way to avoid the complete loading of these files? Note that disabling my anti virus does not help. Update: This only happens with for executable linked with /SWAPRUN:NET. Microsoft confirmed this as a bug in Vista, but they seem not very eager to fix this.

  Read the article

• HTTPS load balancing based on some component of the URL

  - by user38118

  We have an existing application that we wish to split across multiple servers (for example: 1000 users total, 100 users split across 10 servers). Ideally, we'd like to be able relay the HTTPS requests to a particular server based on some component of the URL. For example: Users 1 through 100 go to http://server1.domain.com/ Users 2 through 200 go to http://server2.domain.com/ etc. etc. etc. Where the incoming requests look like this: https://secure.domain.com/user/{integer user # goes here}/path/to/file Does anyone know of an easy way to do this? Pound looks promising... but it doesn't look like it supports routing based on URL like this. Even better would be if it didn't need to be hard-coded- The load balancer could make a separate HTTP request to another server to ask "Hey, what server should I relay to for a request to URL {the URL that was requested goes here}?" and relay to the hostname returned in the HTTP response.

  Read the article

• Website project takes a long time to load in VS.NET 2008

  - by rm

  After getting a new computer (a lot faster than the one I've used before) my Solutions take A LONG TIME (3-4 minutes) to load up in VS.NET 2008. I only have 2 projects in the solution: DB Project and Website Project (from IIS). If I remove the Website Project from Solution - it loads up instantly, when I add that same website project to the OPEN Solution - it loads up instantly. The only time it's slow is when I open the solution referencing my Website project. I had the exact same setup (as far as VS is concerned) on my old box, and never had this problem. Any ideas?

  Read the article

• inserting new relationship data in core-data

  - by michael

  My app will allow users to create a personalised list of events from a large list of events. I have a table view which simply displays these events, tapping on one of them takes the user to the event details view, which has a button "add to my events". In this detailed view I own the original event object, retrieved via an NSFetchedResultsController and passed to the detailed view (via a table cell, the same as the core data recipes sample). I have no trouble retrieving/displaying information from this "event". I am then trying to add it to the list of MyEvents represented by a one to many (inverse) relationship: This code: NSManagedObjectContext *context = [event managedObjectContext]; MyEvents *myEvents = (MyEvents *)[NSEntityDescription insertNewObjectForEntityForName:@"MyEvents" inManagedObjectContext:context]; [myEvents addEventObject:event];//ERROR And this code (suggested below): //would this add to or overwrite the "list" i am attempting to maintain NSManagedObjectContext *context = [event managedObjectContext]; MyEvents *myEvents = (MyEvents *)[NSEntityDescription insertNewObjectForEntityForName:@"MyEvents" inManagedObjectContext:context]; NSMutableSet *myEvent = [myEvents mutableSetValueForKey:@"event"]; [myEvent addObject:event]; //ERROR Bot produce (at the line indicated by //ERROR): *** -[NSComparisonPredicate evaluateWithObject:]: message sent to deallocated instance Seems I may have missed something fundamental. I cant glean any more information through the use of debugging tools, with my knowledge of them. 1) Is this a valid way to compile and store an editable list like this? 2) Is there a better way? 3) What could possibly be the deallocated instance in error? -- I have now modified the Event entity to have a to-many relationship called "myEvents" which referrers to itself. I can add Events to this fine, and logging the object shows the correct memory addresses appearing for the relationship after a [event addMyEventObject:event];. The same failure happens right after this however. I am still at a loss to understand what is going wrong. This is the backtrace #0 0x01f753a7 in ___forwarding___ () #1 0x01f516c2 in __forwarding_prep_0___ () #2 0x01c5aa8f in -[NSFetchedResultsController(PrivateMethods) _preprocessUpdatedObjects:insertsInfo:deletesInfo:updatesInfo:sectionsWithDeletes:newSectionNames:treatAsRefreshes:] () #3 0x01c5d63b in -[NSFetchedResultsController(PrivateMethods) _managedObjectContextDidChange:] () #4 0x0002e63a in _nsnote_callback () #5 0x01f40005 in _CFXNotificationPostNotification () #6 0x0002bef0 in -[NSNotificationCenter postNotificationName:object:userInfo:] () #7 0x01bbe17d in -[NSManagedObjectContext(_NSInternalNotificationHandling) _postObjectsDidChangeNotificationWithUserInfo:] () #8 0x01c1d763 in -[NSManagedObjectContext(_NSInternalChangeProcessing) _createAndPostChangeNotification:withDeletions:withUpdates:withRefreshes:] () #9 0x01ba25ea in -[NSManagedObjectContext(_NSInternalChangeProcessing) _processRecentChanges:] () #10 0x01bdfb3a in -[NSManagedObjectContext processPendingChanges] () #11 0x01bd0957 in _performRunLoopAction () #12 0x01f4d252 in __CFRunLoopDoObservers () #13 0x01f4c65f in CFRunLoopRunSpecific () #14 0x01f4bc48 in CFRunLoopRunInMode () #15 0x0273878d in GSEventRunModal () #16 0x02738852 in GSEventRun () #17 0x002ba003 in UIApplicationMain () solution I managed to get to the bottom of this. I was fetching the event in question using a NSFetchedResultsController with a NSPredicate which I was releasing after I had the results. Retrieving values from the entities returned was no problem, but when I tried to update any of them it gave the error above. It should not have been released. oustanding part of my question What is a good way to create this sub list from a list of existing items in terms of a core data model. I don't believe its any of the ways I tried here. I need to show/edit it in another table view. Perhaps there is a better way than a boolean property on each event entity? The relationship idea above doesn't seem to work here (even though I can now create it). Cheers.

  Read the article

• Performance of file operations on thousands of files on NTFS vs HFS, ext3, others

  - by peterjmag

  [Crossposted from my Ask HN post. Feel free to close it if the question's too broad for superuser.] This is something I've been curious about for years, but I've never found any good discussions on the topic. Of course, my Google-fu might just be failing me... I often deal with projects involving thousands of relatively small files. This means that I'm frequently performing operations on all of those files or a large subset of them—copying the project folder elsewhere, deleting a bunch of temporary files, etc. Of all the machines I've worked on over the years, I've noticed that NTFS handles these tasks consistently slower than HFS on a Mac or ext3/ext4 on a Linux box. However, as far as I can tell, the raw throughput isn't actually slower on NTFS (at least not significantly), but the delay between each individual file is just a tiny bit longer. That little delay really adds up for thousands of files. (Side note: From what I've read, this is one of the reasons git is such a pain on Windows, since it relies so heavily on the file system for its object database.) Granted, my evidence is merely anecdotal—I don't currently have any real performance numbers, but it's something that I'd love to test further (perhaps with a Mac dual-booting into Windows). Still, my geekiness insists that someone out there already has. Can anyone explain this, or perhaps point me in the right direction to research it further myself?

  Read the article

• SAN performance issues storing SQL Server tempdb on a SAN that's being backed up

  - by user42724

  I'm afraid I don't know much about SAN's so please forgive my lack of detail or technical terms. As a developer I've just completed and put on an existing production system a new application but it would appear to have tipped the scales regarding the performance of the backups being taken from the SAN. As I understand it there's a mirror of the SAN being taken usually constantly at the block-level. However, there seem to be so many new writes to the disk that the SAN mirroring/backup process can no longer keep up. I believe I've narrowed this down to SQL Servers tempdb which exists on a drive that contributes the largest portion of the problem! In fact I think tempdb has be contributing the largest portion of the issues all along regardless of my application! My question therefore is whether the tempdb should ever be mirrored or backed on the SAN and whether anyone else has gone through this sort of pain already? I'm wondering whether it's a best practise to make sure that tempdb is never mirrored on a SAN simply because any writes to it don't need to be saved. This also raises a slightly connected question - is it better to rely on SQL Servers built-in database backups tools (DB in full-recovery mode with full/differential and transaction log backups) or, as is the case with our application, SQL server is in simple recovery mode and never backed up since the SAN is mirrored and backed up? Many thanks

  Read the article

• Outbound HTTP performance tuning recommendations

  - by Richard Gadsden

  I'll detail my exact setup below, but general recommendations for a better web-browsing experience will be useful. A nice checklist of things to try would be great! I have 600 users on a single site with an 8MB leased line. I get a lot of moans about the performance of "the internet" (ie web-browsing). What recommendations do the community have for speeding things up without just throwing more bandwidth at it? I expect I will end up buying some more, but good management tips are always valuable. My setup is this: Cisco PIX (515E) firewall on the edge of the network. It's just doing some basic NAT, and opening up a handful of ports to various bastion hosts (aka DMZ servers). The DMZ is just a switch that the servers are plugged into. ISA 2006 Enterprise array (two servers) connecting DMZ to the internal LAN, with WebSense Web Security filtering HTTP traffic so users can't look at porn or waste bandwidth on YouTube during working hours. I've done a few things - I've just switched my internal DNS over to use root hints, which halved DNS query latency from 500ms to 250ms. Well worth doing. I'm trying to cache more aggressively, but so much more of the internet is AJAXy and doesn't cache very well as compared to five years ago. Plus the 70GB of cache which felt like a lot a few years ago really isn't any more. I'm getting about 45% cache hits by number of requests, but only about 22% by size, ie larger objects are less likely to be cached. Latency seems to be part of the problem. Is that attributable to the bandwidth problem, or are there things I can look at to try to reduce latency even on heavily-loaded bandwidth?

  Read the article

• Strange performance differences in read/write from/to USB flash drive

  - by Mario De Schaepmeester

  When copying files from my 8GB USB 2.0 flash drive with Windows 7 to a traditional hard drive, the average speed is between 25 and 30 MB/s. When doing the reverse, copying to the USB drive, the speed is 5MB/s average. I have tested this with about 4.5GB of files, a mixture of smaller and larger ones. The observations were the same on both FAT32 and exFAT file systems on the USB drive, NTFS on the internal hard disk. I don't think I can be mistaken in saying that flash memory has a lot higher performance than a spinning hard drive in both terms of reading and writing. For both memory types, reading should be faster than writing too. Now I wonder, how can it be that copying files from a fast read memory to a faster write memory is actually slower than copying files from a fast read memory to a slow write memory? I think that the files are stored in RAM before being copied over too, and there's caching as well, but I don't see how even that could tip the balance. It can only be in the advantage of writing to the USB drive, since it is "closer" to the SATA system than the USB port and it will receive data from the internal SATA HDD faster. Perhaps my way of thinking is all wrong or it just depends on the manufacturer of the USB pen. But I am curious.

  Read the article

• Proper Use Of HTML Data Attributes

  - by VirtuosiMedia

  I'm writing several JavaScript plugins that are run automatically when the proper HTML markup is detected on the page. For example, when a tabs class is detected, the tabs plugin is loaded dynamically and it automatically applies the tab functionality. Any customization options for the JavaScript plugin are set via HTML5 data attributes, very similar to what Twitter's Bootstrap Framework does. The appeal to the above system is that, once you have it working, you don't have worry about manually instantiating plugins, you just write your HTML markup. This is especially nice if people who don't know JavaScript well (or at all) want to make use of your plugins, which is one of my goals. This setup has been working very well, but for some plugins, I'm finding that I need a more robust set of options. My choices seem to be having an element with many data-attributes or allowing for a single data-options attribute with a JSON options object as a value. Having a lot of attributes seems clunky and repetitive, but going the JSON route makes it slightly more complicated for novices and I'd like to avoid full-blown JavaScript in the attributes if I can. I'm not entirely sure which way is best. Is there a third option that I'm not considering? Are there any recommended best practices for this particular use case?

  Read the article

• Poor gaming performance with hyper-v installed in windows 8

  - by SnowCrash

  I am getting very poor gaming performance on my Windows 8 host OS with Hyper-V installed but no guest machines running. For example World of Tanks reports 60-70 FPS without Hyper-V installed and 4-14 FPS with it installed. A similar, dramatic, hit is observed in several other games so the issue is not WoT specific. To make the point clear, I am not trying to run games in a virtual machine. I don't even have a VM running while observing this effect. I simply have the Hyper-V feature installed. My system specs: AMD Phenom II 965 (3.4 GHz) AMD Radeon 6950 2GB (XFX Double D HD-695X-CDFC) 16GB DDR3 1333 AMD 790GX chipset Mainboard (Gigabyte GA-MA790GPT-UD3H) I have tried every AMD driver from 12.8 to the current 12.11beta8, virtualization is enabled in the BIOS settings, the onboard 3300HD video device is disabled in BIOS and I have read the MSDN blog entry here regarding a similar issue in Server 2008 that was resolved in 2008 R2 (and hopefully not regressed in Win 8). I'd like to be able to use Hyper-V for development and testing at home (I am a sysadmin/software developer professionally). If, however, I can't also use my home system for entertainment I'll have to scrap those plans.

  Read the article

• SSD, AHCI and write performance

  - by Dan

  We've started to deploy SSD drives to our developers workstations. At this moment we're having the unpleasant surprise that the systems using the new SSDs often freeze, with the HDD activity led blinking or being continuously on. Benchmarks shows read speeds around 180 MB/s, but write speeds around 5 MB/s. All developers are using Windows 7 Enterprise, 64 bit, SP1. One of our developers suggested (based on his experience) the following sequence: backup the workstation use a tool to completely erase the SSD make sure AHCI is enabled in BIOS install Windows restore from backup So far, this procedure seems to work (we're still testing, but write speed seems to be 120 MB/s). There are some questions in this context: why do we have to completely reinstall Windows? Is it possible to clean the SSD without reinstalling Windows? Is there a reliable tool? If AHCI was disabled when Windows was installed and we enable it, shouldn't this be enough to correct the write performance issue? If we have to completely erase the SSDs, does this mean the SSDs we've received were used before (SH)? I'm wondering this because the package I've got was open (I didn't think about it at that time, as I considered one of my coworkers simply took a peek inside the package). Has anyone seen a similar problem before?

  Read the article

• Poor Write Performance in VM inside Proxmox PVE 2.0

  - by sorsenne

  I am running a PVE 2.0 on a decent Hardware (2 SATA HDDs as RAID1, 12GB RAM, i7 CPU) but the I/O Performance is very poor inside the VM (Ubuntu 11.10 Server). The very same VM was copied to another Server running simply Ubuntu Server with KVM and had better I/O Perf. this is how the HDD is shown in the Guest: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ATA-8: ST3000DM001-9YN166, CC49, max UDMA/133 ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC49 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA I tested with DD: $ dd bs=1M count=128 if=/dev/zero of=test conv=fdatasync 128+0 records in 128+0 records out 134217728 bytes (134 MB) copied, 19.2222 s, 7.0 MB/s on the Host, this same Test will result with 156 MB/s in average. PS: I am using VirtIO and see no error in dmesg.

  Read the article

• Strange ASP.NET Queue Performance Counters Behavior?

  - by LemurTech

  We have an ASP.NET 2.0 site running in classic mode. I am seeing very strange behavior in the performance counter values. Perhaps these are bugs (I've been all over Google trying to verify this, without much luck), or perhaps it is just my inexperience with monitoring these things. This PerfMon graph (http://imgur.com/Jv5io5J) represents a load test where I add up to 350 virtual users to the site, at a rate of about 1/sec, performing relatively simple page browsing. At the end of the test, I gradually taper off the number of users. This is a 4 CPU server. Machine.config settings for are at the defaults. The solid blue line is ASP.NET Apps v2.x\Requests Executing for the application in question. The profile makes perfect sense, with a quick ramp-up to 32 executing requests (minWorkerThreads x 4CPUs), followed by a slower ramp-up to 48 ((maxWorkerThreads - minWorkerThreads) x 4CPUs). The solid yellow line is ASP.NET v2.x\Requests Queued. Again, this makes sense: after the initial 32 request threads are activated, the queue begins to build as new thread initialization can't keep pace with incoming requests. But as executing requests reaches its highest possible value of 48, the counter for ASP.NET Apps v2.x\Requests Queued (green solid line) suddenly springs to life and maintains step with the yellow counter. As far as I can tell, and with no other apps running on the server, these two counters should have had the same values from the start. One other odd thing: The counter for ASP.NET v2.x\Request Wait Time (dotted yellow line) also does not spring to life until executing requests reaches 48. Shouldn't I be seeing values here from the moment ASP.NET v2.x\Requests Queued begins to build? And likewise, why would ASP.NET Apps v2.x\Request Execution Time (dotted blue) increase significantly only after that peak of 48 is reached? Shouldn't it ramp-up gradually along with queued requests?

  Read the article

• Very poor SCSI hd performance on IBM x336 with LSI 1030 RAID1

  - by David Tschoepe

  I'm experiencing very poor performance on an IBM x336 server with dual 73GB 15k hard drives on a U320 controller, LSI 1030. We're getting maybe 3.5MB/sec max (per HD Tune utility). It should be over 100MB/sec at least, I would think (another x335 box is running 70-80MB/sec). The server was recently setup and didn't really notice the problem, but may have been there from the beginning, so not sure. I have installed the IBM ServerRAID Windows utility. The server is running Windows 2008 R2 Web edition (if that matters). I thought maybe one of the drives was bad, so far I have removed one of the drives out of the array and tested again, but still the same results. I'm waiting for the RAID1 to resync and I will try pulling the other drive next. I've also used the ServerRAID utility but haven't noticed anything in there that might indicate a problem. Not sure if I'm on the right path here. So looking for some advice to track this down.

  Read the article

• Amazon CloudFront and EC2: Global Load Balancing

  - by Matt Rogish

  We have an app that is going to store and serve up a decent amount of data in S3 to a global audience where latency should be minimized. So, we've been doing tests with Amazon CloudFront and have seen favorable results. However, we need a thin middleware layer (to do security etc.) and we'd like to put that in EC2. Due to security restrictions, this middleware layer will do the file streaming from S3/CloudFront: S3/CloudFront - EC2 - Clients We can geographically distribute the EC2 nodes (US East/West, and Ireland) but the problem is that a client in the EU would hit our US server and be fed data from there, thus rendering much of the performance benefit of CloudFront moot. I've been digging through the EC2 docs but I can't find a built-in way to get a geographically distributed version of EC2 a la CloudFront. Elastic Load Balancing sounds like the way to go, but I can't seem to find a way with that to direct based on routing... Preferably, we'd like to keep the amount of stuff outside of EC2/S3/etc. to a minimum (for obvious reasons). Any ideas how to do that within the EC2/S3 framework? DNS/routing tricks? Thanks!

  Read the article

• performance wise htaccess

  - by purpler

  hese's the my htaccess template, i wonder if anything could be added to increase website performance.. # Defaults AddDefaultCharset UTF-8 DefaultLanguage en-US ServerSignature Off FileETag None Header unset ETag Options -MultiViews #Options All -Indexes # Force the latest IE version or ChromeFrame <IfModule mod_setenvif.c> <IfModule mod_headers.c> BrowserMatch MSIE ie Header set X-UA-Compatible "IE=Edge,chrome=1" env=ie </IfModule> </IfModule> # Proxy X-UA Setup <IfModule mod_headers.c> Header append Vary User-Agent </IfModule> #Rewrites Options +FollowSymlinks RewriteEngine On RewriteBase / # Redirect to non-WWW RewriteCond %{HTTPS} !=on RewriteCond %{HTTP_HOST} ^www\.(.+)$ [NC] RewriteRule ^(.*)$ http://%1/$1 [R=301,L] # Redirect to WWW RewriteCond %{HTTP_HOST} ^domain.com RewriteRule (.*) http://www.domain.com/$1 [R=301,L] # Redirect index to root RewriteRule ^(.*)index\.(php|html)$ /$1 [R=301,L] # Caching ExpiresActive On ExpiresDefault A0 Header set Cache-Control "public" # 1 Year Long Cache <FilesMatch "\.(flv|fla|ico|pdf|avi|mov|ppt|doc|mp3|wmv|wav|png|jpg|jpeg|gif|swf|js|css|ttf|eot|woff|svg|svgz)$"> ExpiresDefault A31622400 </FilesMatch> # Proxy Caching <FilesMatch "\.(css|js|png)$"> ExpiresDefault A31622400 Header set Cache-Control "private" </FilesMatch> # Protect against DOS attacks by limiting file upload size LimitRequestBody 10240000 # Proper SVG serving AddType image/svg+xml svg svgz AddEncoding gzip svgz # GZip Compression <IfModule mod_deflate.c> <FilesMatch "\.(php|html|css|js|xml|txt|ttf|otf|eot|svg)$" > SetOutputFilter DEFLATE </FilesMatch> </IfModule> # Error page ErrorDocument 404 /404.html # Deny access to sensitive files <FilesMatch "\.(htaccess|ini|log|psd)$"> Order Allow,Deny Deny from all </FilesMatch>

  Read the article

• apache performance timing out

  - by Mike

  Im running a webserver where I'm hosting about 6-7 websites. Most of these websites get their content from MySQL which is hosted on the same server. Traffic average per day is about 500-600 unique visitors, about 150K hits per week. But for some reason sometimes websites send a timeout, OR sometimes websites dont load all images. I know that I should perhaps separate static content from dynamic content, but for now I think that's not a possibility. I would appreciate any suggestions on how could I improve the performance of apache, so it doesn't keep timing out. Server is running on Sempron LE 1300; 2.3GHz,512K Cache 2GB RAM 10Mbps/1Mbps Services: MySQL, ProFTPD, Apache. Private + Shared = RAM used Program ---------------------------------------------------- 1.2 MiB + 54.0 KiB = 1.2 MiB proftpd 4.1 MiB + 23.0 KiB = 4.1 MiB munin-node 20.8 MiB + 120.5 KiB = 20.9 MiB mysqld 47.3 MiB + 9.9 MiB = 57.3 MiB apache2 (22) top: Mem: 2075356k total, 1826196k used, 249160k free, Timeout 35 KeepAlive On MaxKeepAliveRequests 300 KeepAliveTimeout 5 <IfModule mpm_prefork_module> StartServers 10 MinSpareServers 20 MaxSpareServers 20 MaxClients 60 MaxRequestsPerChild 1000 </IfModule> <IfModule mpm_worker_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule>

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >