Search Results

Search found 24121 results on 965 pages for 'display driver'.

Page 38/965 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• Help identifying device and driver for 0bda:1724

  - by user104547

  I've got a new Lenovo Ideapad Yoga 13. The onboard lan/bluetooth device is identified in Linux as 0bda:1724 (via lsusb). No network peripherals are reported from lspci. From the interwebs, the vendor:product above looks to be RT2573, however, in Windows, the device is identified as RTL8723A. Unfortunately, I have followed both roads, trying rt2500usb, rt2x00usb, and rtl8723e. I have emailed Realtek asking them for help but so far my email has fallen on deaf ears. I've posted the output of lspci -nn -v and lsusb -v to: http://pastebin.com/dqvTSVjF Any help at all would be appreciated. Thank you, Ryan

  Read the article

• There is no driver for Ralink chip 5360

  - by Dmitrix

  I bought DWA-525 and it does not work Google did not help. No one on the Internet could not get the device to work =( lspci 01:06.0 Network controller: Ralink corp. Device 5360 I do not know what to do uname -a Linux pc 3.0.0-19-generic #33-Ubuntu SMP Thu Apr 19 19:05:57 UTC 2012 i686 athlon i386 GNU/Linux cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10" I am sure that the problem is DWA-525 and chip 5360. I found many similar problems on the Internet without solving =(

  Read the article

• ATI Catalyst driver 12.8 is not using hardware acceleration on Precise

  - by Jack Wright

  I've been using Ubuntu and ATI Catalyst for years. On my clean install of Ubuntu 12.04 I've noticed that Catalyst 12.6 and then 12.8 are not actually using my HD5750 GPU for hardware acceleration - high CPU usage, zero GPU load. Everything installed correctly with no hassles, fglrxinfo and vainfo are correct as per this HowTo for Precise. I have an Ubuntu 10.04 with Catalyst 12.6 installation on the same hardware which does use the GPU - low CPU usage, high GPU load when transcodeing video files or playing video content. The VA-API drivers are not installed on the 10.04 build. They are not mentioned in this HowTo for Lucid. fgl_glxgears frame rates on Precise are a fifth of the rates on Lucid. LUCID jw@Kworld:~$ fgl_glxgears Using GLX_SGIX_pbuffer 16867 frames in 5.0 seconds = 3373.400 FPS 12523 frames in 5.0 seconds = 2504.600 FPS 13763 frames in 5.0 seconds = 2752.600 FPS PRECISE jw@NewWorld12:~$ fgl_glxgears Using GLX_SGIX_pbuffer 12905 frames in 5.0 seconds = 2581.000 FPS 3230 frames in 5.0 seconds = 646.000 FPS 517 frames in 5.0 seconds = 103.400 FPS 518 frames in 5.0 seconds = 103.600 FPS 6489 frames in 5.0 seconds = 1297.800 FPS This is glxgears running in fullscreen. In Lucid (10.04) I can't see the gears, they are spinning so fast, but in Precise (12.04) they are really sluggish. Has anyone else noticed a problem like this? Cheers, Jack.

  Read the article

• Getting Ethernet driver to crippled machine

  - by Richard

  The reply at How do I install drivers for the Atheros AR8161 Ethernet controller? probably helps me. I have a Toshiba S855, bought yesterday. lspci -vv | grep Atheros command from the terminal shows me I have the AR8161 Gigabit Ethernet controller (rev 10) However the answer sudo apt-get install ... requires an internet connection. How can I, using another machine, capture the necessary information on that other machine to copy across to the crippled machine, and then how do I build from there. Thanks in anticipation

  Read the article

• Low resolution Dektop intel i7 3770 and intel board DH67BL

  - by rtorres

  I installed Ubuntu 12.04.1 in a desktop with the following specs: CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz Motherboard: Intel DH67B However the monitor is not identified (Monitor: Unknown) such that maximum resolution is 1024x768. This occurs with Samsung Syncmaster 2033 (resolution 1900x600), and is the same with ViewSonic VX2453mh-LED (resolution 1920x1080). I'd be very grateful if anyone could give me a suggestion as to how to fix the resolution.

  Read the article

• adjust resolution on Ubuntu Server 10.04?

  - by Mike Grace

  Installed Ubuntu Server 10.04 on an old laptop and I noticed that the system is trying to show the CLI below my screen. This means that if I run a script or a program with a bunch of output, once it is done, I have to press return several times to bring the output to the point where I can actually see it on the screen. I also have to clear the screen to be able to see what I am typing at the current command prompt. The laptop is an EliteGroup 536S with a native screen resolution of 1024 x 768 How can I adjust the resolution for Ubuntu Server 10.04? What file do I need to edit if editing a file is the solution? I've seen posts on how to change the resolution on the desktop version of Ubuntu but not the server version.

  Read the article

• Ubuntu 12.04 - Tiny title bar and icon fonts

  - by Dean Mokhtar

  As you can see in the screenshot, the fonts for the title bar (any window) and for the icons within the file browser (as well as in the navigation pane to the left) are very very small, I have tried to fix this by a number of ways including using MyUnity, but to no avail. Could someone please help me with this as it can render my PC unnavigatable unless I'm sitting right up against it, and even then I struggle. I am using Ubuntu 12.04. Screenshot

  Read the article

• If the net is required to install an Atheros 8161 driver,how do I connect to the net without the driver?

  - by Paul

  If Ubuntu does not recognize hardware to connect to the net, and a net connection is necessary in order to install drivers for hardware that connects to the net, then how is such a system ever going to connect to the net? You can see the situation in this thread: How do I install drivers for the Atheros AR8161 Ethernet controller? and in this thread: build-essential and linux-headers-generic gives abort message Surely, surely, there is a way out of this catch-22.

  Read the article

• How to make pulseaudio and ubuntu detect the same audio device as alsa driver

  - by Kiwy

  I use Ubuntu 14.04 x64 and I use gnome-shell on my laptop. I have a Bose companion 5 (which is basically a USB sound system) and a HDMI port, both does work perfectly when I just boot with the cable plugin. However, when my laptop go to sleep or get unplugged from those two outputs, if I plug back the device, I end up without any hardware detection (only the built-in speakers) from pulse and gnome-shell sound output selector while if I use alsamixer, the device look up and ready. gstreamer-properties allow me to select and test effectively any device but while alsa recognize any device on the run, pulse is not capable of handling things correctly, my question is then: How can I make pulse detect and use the same hardware as alsa, or how to remove completely and gracefully pulseaudio (meaning volume applet running in gnome shell) I don't mind if the project implies to recompile half gnome shell if it implies those audio outputs work all the time. Pulse does not list my soundcard when I use command pactl list cards while the module plug&play for sound card is loaded in pactl list modules. I really don't know what to do, the behavior seems pretty random.

  Read the article

• Dark screen when wake / Unable to control screen brightness

  - by John

  Running Ubuntu 11.04 on Lenovo ThinkPad with an Nvida graphics card. The unit goes to sleep when the lid is shut. (The unit goes to suspend mode (not to disk/hibernate), AC gets turned off, running on battery) Upon lid-open sometimes the screen is almost too dark to read. I'm really not sure of the exact cause, (very low batt??). The only fix is a reboot. The screen brightness buttons have never worked in Ubuntu. I have messed w/ the power management preferences. No change. At one point I messed w/ the gnome settings. No change. I have tried a few cmds: echo 9>/sys/class/backlight/acpi_video0/brightness setpci -s 00:02.0 F4.B=10 xgamma -gamma .75 None of these help. Most have zero effect. I think it is and acpi thing, but that is just a guess. I'm out of idea's, and looking for suggestions. Thanks

  Read the article

• SEO As the Online Business Traffic Driver

  The SEO means that the online business marketer can drive his site or blog to the top places at the search engine result pages with the selected keywords. This requires, that a marketer knows the search engine algorithm, i.e. according to which criteria the engine will put the sites in a certain order.

  Read the article

• Change the brightness adjustment interval

  - by TreefrogInc

  So whenever I hit my dim/brighten keys on the keyboard, a notification bubble pops up with the screen brightness. All that's fine, but I would like to be able to change how much the brightness changes with each key press. For example, right now it takes just 5 presses to go from the completely dark to the brightest setting. However, I know from the "Brightness/Lock" setting that the screen is capable of much smaller intervals than this. Is there a way to change how much the brightness jumps each time the keys are pressed?

  Read the article

• Wireless USB Adapter driver configuration

  - by Jones

  First I would like agree one thing that this is fully for Ubuntu, not for BackTrack. However I'm posting my BackTrack question here since I find similar problems in backtrack forum are being unanswered and Linux/Unix site of StackExchange has very low attraction. I'm having USB wifi adapter (iBall Baton), having chipset RTL8191SU. It displays available wifi networks in Wicd manager. But while trying to connect it gives me bad password. When I'm trying to run airmon-ng it didn't returned me the monitor mode. I tried to replace with Ubuntu 12.10 drivers. But it totally nulled the device functionality. However I restored the drivers. I'm interested to compile drivers as if anyone indicate the methods. Awaiting ideas!

  Read the article

• nvidia driver problems after upgrading to 3.2.0-26 on Ubuntu 12.04 64bit

  - by Lev Levitsky

  After installing latest updates I can't set screen resolution higher than 1024x768; every time after the boot I get a message Could not apply the stored configuration for the monitors (Note: removing ~/.config/monitors.xml stopped the message, but not the problem) I can boot with 3.2.0-25 and the graphics look normal. Here's what I have in /var/log/apt/term.log (excerpt): Setting up linux-image-3.2.0-26-generic (3.2.0-26.41) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic update-initramfs: Generating /boot/initrd.img-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-26-generic Found initrd image: /boot/initrd.img-3.2.0-26-generic Found linux image: /boot/vmlinuz-3.2.0-25-generic Found initrd image: /boot/initrd.img-3.2.0-25-generic Found linux image: /boot/vmlinuz-3.2.0-24-generic Found initrd image: /boot/initrd.img-3.2.0-24-generic Found linux image: /boot/vmlinuz-3.2.0-23-generic Found initrd image: /boot/initrd.img-3.2.0-23-generic Found linux image: /boot/vmlinuz-3.0.0-17-generic Found initrd image: /boot/initrd.img-3.0.0-17-generic Found memtest86+ image: /boot/memtest86+.bin I went to "additional drivers" and saw some updates available there, but an attempt to install them failed, leaving the following in /var/log/jockey.log (long log, pasted here). The full log won't fit in the question, so I'm showing $ fgrep 'ERROR' /var/log/jockey.log 2012-06-30 17:29:57,897 WARNING: modinfo for module vmxnet failed: ERROR: modinfo: could not find module vmxnet 2012-06-30 17:29:57,937 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2012-06-30 17:29:58,072 WARNING: modinfo for module nvidia_96 failed: ERROR: modinfo: could not find module nvidia_96 2012-06-30 17:29:58,240 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-06-30 17:29:58,293 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:29:58,351 WARNING: modinfo for module nvidia_173_updates failed: ERROR: modinfo: could not find module nvidia_173_updates 2012-06-30 17:29:58,385 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-06-30 17:29:58,420 WARNING: modinfo for module nvidia_96_updates failed: ERROR: modinfo: could not find module nvidia_96_updates 2012-06-30 17:29:58,455 WARNING: modinfo for module ath_pci failed: ERROR: modinfo: could not find module ath_pci 2012-06-30 17:29:58,478 WARNING: modinfo for module fglrx_updates failed: ERROR: modinfo: could not find module fglrx_updates 2012-06-30 17:29:58,531 WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx 2012-06-30 17:29:58,588 WARNING: modinfo for module omapdrm_pvr failed: ERROR: modinfo: could not find module omapdrm_pvr 2012-06-30 17:29:59,537 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-06-30 17:29:59,613 WARNING: modinfo for module nvidia_173_updates failed: ERROR: modinfo: could not find module nvidia_173_updates 2012-06-30 17:29:59,686 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-06-30 17:29:59,764 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:30:29,544 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:30:29,545 ERROR: XorgDriverHandler.enable(): package or module not installed, aborting I'm not sure if it's a bug, as the first log shows some errors. What can I try?

  Read the article

• Lubuntu 12.04 on Acer laptop boots to blank blue screen

  - by WGCman

  My previous question on this was closed, but I am posting it again as the solution which my son eventually found may assist other users of the forum, or someone may be able to tweak the solution to improve the performance. Having installed Kubuntu 12.04.01 from a live USB onto my desktop, I wanted to do the same on my laptop, an Acer Aspire 1362 Laptop, which has 256MB RAM (actually 512 "on the box", but a good deal can be borrowed by the graphics!). I found Kubuntu wouldn't run on so little memory but downloaded: Lubuntu-12.04-alternate-i386.iso, which I understood was light enough to go. The laptop has one internal 40GB Toshiba hard drive divided into 3 partitions: C,19GB with Windows XP, Windows program files and some data, D, 19GB mostly data, and a small 2GB partition with some Acer software, which XP can't normally “see”. I transferred most of the contents of D to a memory stick, leaving 16GB free for Lubuntu. I did not want to dump XP yet, though it is painfully slow. I installed Lubuntu from then USB stick, accepting the default answers to most of the questions. The D: partition was further partitioned into a 500MB boot partition, 10GB for Linux, 2GB Swap and 6GB for data shareable between Linux and Windows. I had no error messages during installation, rebooted, was offered the choice of Ubuntu or XP, and selected the former. After a few minutes, I get a dark blue screen announcing Lubuntu with five dots underneath which lighten in turn. Eventually the lights stopped, and whatever I try the screen remains blank apart from “Lubuntu” I tried several solutions suggested on the forum for “identical” questions but without success.

  Read the article

• screen does not wake up after suspend/ brightness will not adjust

  - by Nathan

  My computer is one of these: http://www.newegg.com/Product/Product.aspx?Item=N82E16834230467 Asus Zenbook UX32A-DB51 Just bought it yesterday. Set to "suspend" when I close the lid, but when I open it up again I just get a black screen. Pressing the power button doesn't work, not does clicking the mouse or any key combination. The same is true if I leave the computer until it suspends. Black screen, no response, have to reboot. I also can't seem to adjust the brightness. I put "brightness up" and "brightness down" function keys in, and when I push them it shows the brightness level as going up and down on the meter, but the screen does not actually become more or less bright. I am totally new to all of this. Please tell me what additional information you need to help me and where I can find it. Thanks! Edit: Tried the following: sudo gedit /etc/default/grub Change the line GRUB_CMDLINE_LINUX="" into GRUB_CMDLINE_LINUX="acpi_osi=Linux" sudo update-grub Restart your linux And "acpi_backlight=vendor" both to no avail.

  Read the article

• window title bar and controls (minimize, maximize and close) don't work sometimes

  - by Ravindranath

  I am using Ubuntu 11.10. Sometimes the window controls don't work. If I click on any of the icons on top-right or top-left they just become colorless and fade away, as though that are not present. The window has not frozen, as I can click inside the window and continue to work with it. The moment I click inside the window the titlebar controls regain their color, but when I click them again, they fade and bcm colorless. As a result, I cannot close, minimize or maximize. This is not a continuous problem, but happens very frequently.

  Read the article

• Which driver for ATI Radeon 9600 All-In-Wonder

  - by vanja

  I'm very new to Ubuntu and Linux for that matter, and wondering if anyone there found proper drivers for ATI Radeon 9600 All-In-Wonder. The system (Ubuntu 12.04) doesn't let me change screes resolution and it's not recognizing the card.. I found this page http://wiki.cchtml.com/index.php/Hardware that shows some info but i'm really confused where to start and if it's possible at all to make everything work. Any help would be really appreciated. Thanks in advance!! -vanja

  Read the article

• How to log out with a command in a gnome-less environment?

  - by octosquidopus

  I installed various window managers (Awesome, dwm, etc.) from which I am not able to log out back to the login screen (gnome-session) in order to switch to another window manager. I need to reboot to do that, which is a waste of time. Question How can you log out via the terminal? didn't work.. dbus-send --session --type=method_call --print-reply --dest=org.gnome.SessionManager /org/gnome/SessionManager org.gnome.SessionManager.Logout uint32:1 ..neither did this: gnome-session-save --force-logout ..nor that: gnome-session-quit --force-logout they all returned: Failed to call logout: The name org.gnome.SessionManager was not provided by any .service files Is there a quick way to log out back into Gnome's session manager from a non-Gnome desktop manager using a terminal emulator? I know that CTRL+ALT+BACKSPACE can be configured to restart X, but I'm looking for the easiest way to log out.

  Read the article

• Update usb Driver

  - by Enrico Caponi

  i just now start to use Xubuntu, and i install Xubuntu on my second laptop i had in my garage, just for put back in use. On the ASUS xubuntu work really perfect but now after i put on my old laptop i have some little proble. My Laptop old is a Fujitsu Siemens AMILO L7310GW, i explain my problem: The installation works fine, everything is quite good but there are few little problem i have a know idea, how I can fix them... so USB: i have a optical mouse usb and works quite strage, when i tip on terminal "lsusb" the system recognized fine my mouse but the strange thing is the mouse it move like jump around the desktop. what i had done: - update the usbdrive - change mouse - tried mouse on different pc and on both they work fine another problem i don't know where came from: when i take off my mouse, and try to put back doesn't work at all, if i want back i have to restart the OS. and no usb pen or other ar working so for that i think is usb problem. i can tell before Xubuntu whit winXP the usb work fine, but i don't want windows anymore... So i tried almost everything you can find on the net, maybe i have done something wrong so please help me. I tried also to install the new version 12.04, but i came back for the 11.10.

  Read the article

• What does the kernel boot parameter "set acpi_osi=Linux" do?

  - by AIB

  I am facing an issue with brightness control in my laptop which has Intel HD graphics. So when I searched for a fix I found that a common suggestion is to edit the GRUB file line, GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor" So could anyone tell me what the kernel boot option acpi_osi=Linux do? My OS is Ubuntu 10.10 64-bit version update The boot parameter acpi_osi is used as follows, acpi_osi= [HW,ACPI] Modify list of supported OS interface strings acpi_osi="string1" # add string1 -- only one string acpi_osi="!string2" # remove built-in string2 acpi_osi= # disable all strings But still I don't find a reason why this should fix any laptop issue!!

  Read the article

• Blender 2.63a window position unstable with dual monitor extended desktop

  - by Steve Smith

  I have two 1920 x 1200 HP monitors and running Ubuntu 12.10. If I set them up as an extended desktop, (both 1280 x 1024 positioned for 2048 x 1280, all my applications work fine EXCEPT Blender (even Inkscape). Blender works great on a single monitor but always defaults to a window size that uses all available real estate and it can't do that with 2048 x 1280. It launches, but jumps all over the screen. Does any know a way to start Blender in a fixed size window so it would run in just one monitor?

  Read the article

• phpBB - display a public message when the whole board is private

  - by Sparky672

  In my installation all discussion forums/boards are private and can only be seen after a user registers and admin approves their membership. This is working. When a user first comes to the main phpBB page and they're not logged in, they can see very little except for the login and registration functions. Now I'm trying to configure phpBB to display a Read Me posting that is available to general public before registration or login. The problem is that I'd have to create a whole "public" forum and it would likely contain only one topic thread called "Read Me". The users would have to click into the public forum and then click again to get into the Topic called "Read Me". Is it possible to have a Topic thread outside of a forum? If not, is there another, better, way to achieve this? I just want to display a message, maybe a few short paragraphs to the public, explaining the purpose of the Forum and that they must register and wait for approval in order to gain additional access. I'm not seeing anything like this in the ACP. Thank-you.

  Read the article

• IRQ Conflicts Causing Video Card and Boot Problems?

  - by sanpatricio

  tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

  Read the article

• Can't install the wireless driver in HP Pavilion dv2419us

  - by maqtanim

  I've just installed Ubuntu 13.04 in an old HP Pavilion dv2419us. The problem is, Ubuntu doesn't detect the wireless card. But it works fine in Windows 7. The following command returns nothing! lspci -vvnn | grep 14e4 And the lspci output is: 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: NVIDIA Corporation C51 [GeForce Go 6150] (rev a2) 00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3) 00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 05:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 05:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 05:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 05:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) The command lspci -nn | grep 0280 gives no output. Any suggestion regarding this?

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >