Search Results

Search found 4572 results on 183 pages for 'dual monitors'.

Page 38/183 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• Can I install 12.10 on Ainol Novo7 Venus?

  - by Jens Grünwald

  Is it possible to install Ubuntu on my Ainol Novo7 Venus? I don't want any tablet-version of ubuntu, because I like ubuntu how it is and think there is no need for a tablet-version (I know there is no tablet-version, but many questions after it). So I want to install full desktop-ubuntu 12.10 with unity and everything, but I want a dual-boot with my existing android installation. Is that possible? If so, how? Is 16gb enough for ubuntu or should I buy an extra sd-card for it?

  Read the article

• Want to back up using dd, but my present ubuntu installation is 149.04 + 3.81(swap) GB, my target drive is only 149.05 GB

  - by Shreshth

  My netbook is a Windows7-Ubuntu 12.04 dual boot. in gparted the strcture looks like Partition filesystem size /dev/sda2 extended 152.86GiB __/dev/sda6 ext4 149.04GiB __/dev/sda5 linux-swap 3.81GiB /dev/sda3 ntfs 100MiB /dev/sda4 ntfs 145.13GiB /dev/sdb1 fat32 149.05GiB I want to backup my ubuntu 12.04 installation that is sda2 (sda6 + sda5) to sdb1. As you can see sda5 +sda6 is 152.86 GB where are sdb1 is only 149.05 GB. Can I backup only sda6(149.04GB) without losing any data? That is to say, will I be able to restore my ubuntu using only sda6 and later add the needed swap? Edit: Made it readable.

  Read the article

• How can I retrieve monitor information?

  - by Jon Tackabury

  I am trying to retrieve the monitor ID's as shown in the Windows display properties (#1, 2... etc), but I can't seem to find a way. I have tried using EnumDisplayMonitors as well as EnumDisplayDevices. They both return something like "\.\DISPLAY1". However, this number doesn't always match the number shown by Windows, especially when 2 video cards are being used to drive 3 or more monitors. Is there an API call I am missing to retrieve this information, or is there a way to get it from the registry or somewhere else? Thanks! I have tried these methods: Win32: EnumDisplayMonitors, EnumDisplayDevices: Neither of these return monitors that aren't active, and neither one returns the correct IDs. WMI: "select * from Win32_DesktopMonitor" doesn't return all the monitors, and there is no ID. Registry: I have found the monitors in various locations, none of the places I found have the info I am looking for. Any help is much appreciated. :)

  Read the article

• How do I stop panning on a monitor that supports a specific resolution?

  - by IronicMuffin

  Hi all, I've been battling this for a few days now. Any and all help is appreciated. I have a planar monitor with a native res of 1280x1024. At one point, I had used PowerStrip to override "something" and set the res to 1600x1200, and it worked great. I then installed new intel graphics drivers for my 86895g (or w/e model) video card, which screwed up whatever settings I had. If I set it to 1600x1200 this time, it would set the res correctly, but give me a 1280x1024 viewport and the screen would pan when the mouse got to the edges of the screen. Absolutely not useful. Ok, so I was limited to 1280x1024 now. W/e. Now...enter new video card with two video ports. I have two monitors now and the latest nVidia drivers. I decide to try to get dual 1600x1200 going...ended up screwing the original monitor up so much now that it's at 1280x1024, with a 1024x768 viewport and panning! Absolutely not usable now. So what I need, and I can't seem to find on any forums, is help doing one or more of the following: Clearing out all monitor/edid info out of the windows registry without corrupting the registry. Actually correctly override the EDID values and get my sweet res back. Some other way of getting back to at least dual 1280x1024 with NO panning. Note: My device manager shows 4 monitors for some reason. My registry shows entries for all sorts of monitors that have been hooked up to the machine over the years. It's making it difficult to debug. Experience with PowerStrip would be helpful. I've been mucking with Phoenix EDID designer and MonInfo as well, but I'm stumbling around in the dark with these. Windows XP SP2 nVidia GeForce 6200 nVidia drivers: v258.96 Monitor: Planar PL 1910M Thanks!

  Read the article

• Multiple Video Cards - Stuttering

  - by jstawski

  I have two video cards: - XFX PVT84JUDD3 GeForce 8600GT XXX 256MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card - EVGA 256-P1-N399-LX GeForce 6200 256MB 64-bit GDDR2 PCI Video Card both running the same set of drivers on Windows 7 64-bit. When I work with 2 monitors connected to the 8600GT card everything works smoothly. When I connect the third one to the 6200 then Windows works well and all of a suddon the screens turns black for up to 5 minutes. Then it goes back and at some random interval it goes black again. I can still see the pointer and hit CTRL+ALT+DEL and see the menu to log off, bring the task manager, etc. I've tried changing the 6200 to another PCI slot and the error persists. I've tried connecting 2 monitors only one to each card, same problem. Tried swapping them, mixed and matched the monitors to see if it was a problem with the monitor and my conclusion was that it is not the monitor. The problem also occurred with Vista 64 as well. What could be generating this problem? Can it be the fact that they are different interfaces? Maybe the Motherboard? Should I change something on the BIOS? What do you guys think?

  Read the article

• Ubuntu/Nvidia lists DVI dual cable as single

  - by Joseph Mastey

  I have an NVidia Quadro FX 880M graphics card, from which I am trying to drive 2 monitors: my internal laptop montior (15.6", 1920x1080, Nvidia driver says it's running via DisplayPort) and an external 27" monitor (Dell U2711, 2560x1440 native resolution, via DVI). I've hooked the dual DVI cable to the dual DVI port on my dock (Dell PR03X) and installed the proprietary NVidia driver, but I cannot seem to get the full 2560x1440 out of the larger 27" external monitor. Looking at the NVidia driver settings, the monitor's connection is reported as a single DVI cable, rather than a dual one, which would explain the reduced resolution. Does anyone have any experience with an issue like this? What can I do to make full use of my new monitor? (Possibly) Relevant Information: There is no DVI port on the laptop itself, but one is provided via the dock. The laptop and dock both provide a DisplayPort jack, but I have been unable to get this working on either w/ the monitor. I did have the nouveau driver installed when I installed the nvidia proprietary driver, but have since removed it (no change in the monitor situation when I removed it). The 27" reports a max resolution of 1680x1050. Thanks, Joe

  Read the article

• Windows 7 does not recognise second display output

  - by gilles27

  I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

  Read the article

• Windows 7 does not recognise second display output [closed]

  - by gilles27

  I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

  Read the article

• Dual Monitor difficulties (VirtualBox ubuntu host) - rdesktop sessions mirror

  - by rukus5

  I am running ubuntu 9.10 host with a Windows guest and need to extend my guest windows desktop into the second monitor (otherwise I will have to convert to a dual boot situation because this is a work furnished computer, please HELP!!) Current Situation: Windows Guest Running with VRDP enabled and successfully connecting. Guest Additions running and VBox set to 2 monitors and I see two monitors in display settings. connecting via 2 different rdesktop sessions mirrors the display. even though display settings of Guest Windows is set to extend desktop. is there a rdesktop option to signify to the VBox it is the second display? I need the second connection be the second display. any ideas?

  Read the article

• Examples of useful or non-trival dual interfaces

  - by Scott Weinstein

  Recently Erik Meijer and others have show how IObservable/IObserver is the dual of IEnumerable/IEnumerator. The fact that they are dual means that any operation on one interface is valid on the other, thus providing a theoretical foundation for the Reactive Extentions for .Net Do other dual interfaces exist? I'm interested in any example, not just .Net based.

  Read the article

• How can I dual boot my iphone or ipad to run a very simple custom os?

  - by Jim98

  I am an experienced C/C++ programmer and have worked with assembly and many other programing language and I want to start a project as a learning process. I want to try and run a simple custom os on the iphone or ipad. What knowledge would I need to do this, and how does the iphone or ipad bootloader load the os and how could I modify it to load a custom os? Im not really sure what to ask here so I really just need to get as much information as possible so I could ask some more informed questions to get my project started Thanks

  Read the article

• Create Windows Bootloader/Boot into Windows from Ubuntu

  - by Kincaid

  I have computer that dual-boots (or tri-boots) Windows 8 Release Preview, Windows 7, and Ubuntu 12.04. Grub boots between Windows 8 and Ubuntu; for which I use primarily. Recently, I have decided I wanted to remove Ubuntu, as I hardly used it. As a stupid mistake, I deleted the Ubuntu partition before changing the bootloader to replace Grub. Whenever I know boot the machine, it gives me the "grub-rescue" prompt -- I am unable to boot into either Windows (8 nor 7), nor Ubuntu (except via USB, of course). I do not have any Windows 7/8 recovery media, so that isn't an option. Please note that after I deleted the Ubuntu partition, I put the PC into hibernate, and then turned it on. This means the C:\ [Windows 8] drive cannot be mounted. I don't know if that is bad, but it definitely doesn't make things better. I am currently booting Ubuntu via USB, in an effort to restore the Windows bootloader solutions. I have looked into using boot-repair to solve the problem using the instructions here, although after attempting to apply the changes, it gave the error: "Please install the [mbr] packages. Then try again." I don't know why I'm getting this error; is there a way to install the 'mbr packages?' I honestly don't know what exactly they are, nor how to install them. Is there any options I have not yet exhausted to be able to boot back into Windows, in the case that there is a better way? In the end, I want to set the bootloader to boot into Windows 8, but booting into either Windows 7 or 8 is fine -- I can use EasyBCD from there. Is there a simple solution to this? I've checked BIOS, and I haven't been able to find a way to boot into Windows. Any help would be greatly appreciated.

  Read the article

• rsync'd a folder, folder doesn't show up, but free disk space decreased

  - by Patrick

  I am currently trying to switch from mac to windows/ubuntu dual boot (on 2 seperate internal HDDs), but ran into some trouble restoring my documents. I am not sure all the information below is necessary, but if I knew how to solve it, I wouldn't ask it here. I backed up my mac before buying this laptop on an external HDD with Carbon Copy Cloner. I wanted to put these files on my user folder on my windows HDD, but I could not do that from inside windows (HFS+ format of mac), so I used rsync from inside Ubuntu to copy the documents from the ext hdd to the windows partition. It seemed like it went okay, but from inside windows (and later also Ubuntu) the folder didn't show up. My free HDD space, however, has reduced with about 200 GB (the size of the backup) when looking at the disk properties (from inside Windows and Ubuntu). rsync command I used: rsync -av /media/patrick/Toshiba\ 1.5T/Users/patrickvandenberg/ /media/patrick/Windows8_OS/Users/Patrick/MacBackup/ Folder does not exist: patrick@patrick-Lenovo-IdeaPad-Y410P:~$ cd /media/patrick/Windows8_OS/Users/Patrick/MacBackup bash: cd: /media/patrick/Windows8_OS/Users/Patrick/MacBackup: No such file or directory Size of disk: patrick@patrick-Lenovo-IdeaPad-Y410P:~$ du -hs /media/patrick/Windows8_OS/ 195G /media/patrick/Windows8_OS/ Size of disk according to Disk properties: http://i.stack.imgur.com/OteMX.png (not enough rep to insert the image)

  Read the article

• How to diagnose and fix Kernel Panic Fatal Machine Check error?

  - by 0x4a6f4672

  I have got a new Samsung Series 7 laptop with dual boot setup for Windows 8 and Ubuntu 12.10. A fine machine comparable to a Macbook Pro. The Ubuntu installation was quite a hassle, but with the help of Boot Repair finally it seemed to work. Or so I thought. Windows 8 starts fine, but if I want to start Ubuntu regularly the following Machine Check Exception error occurs, quite similar to this one [Hardware Error] CPU 1: Machine Check Exception: 5 Bank 6 [Hardware Error] RIP !inexact! 33 <00007fab2074598a> [Hardware Error] TSC 95b623464c ADDR fe400 MISC 3880000086 .. [similar messages for CPU 2,3 and 0] .. [Hardware Error] Machine Check: Processor context corrupt Kernel panic - not syncing: Fatal Machine Check Rebooting in 30 seconds Kernel panic does not sound good. Then it starts to reboot, and the second boot trial often works. Is it a Kernel or driver problem? The laptop has an Intel Core i7 processor. I already deactivated Hyperthreading in the BIOS, but it does not seem to help :-( I also disabled the Execute Disable Bit (EDB) flag in the BIOS. EDB is an Intel hardware-based security feature that can help reduce system exposure to viruses and malicious code. Since I disabled it, the error did occur less frequently, but it still appears occasionally :-( It seems to be the same error as described here and here. Maybe a Samsung specific Kernel problem? A similar error also happens on a Samsung Ultrabook Series 9 (which seems to be kernel bugs 49161 and 47121). At my Samsung Series 7, it still occurs for instance during booting on battery after "Checking battery state". Perhaps anyone else has an idea? These Kernel Panic errors are reallly annoying..

  Read the article

• Cannot choose windows installation [closed]

  - by Toby

  Possible Duplicate: Ubuntu 12.4 and XP on Seperate Drives, Dual Boot, How? I've never used Linux before in any form, but was always intrigued, so after a while of deciding whether to risk it I installed Ubuntu 12.04 During the installation I was asked "what would you like to do?" Install Ubuntu as the only operating system, alongside another os, or something else. I chose something else as I wanted to format one of my old 100Gb IDE drives to serve as the partition to install ubuntu on. I formatted this drive with ext4 and made it the root directory for the installation, all ok. I also have on a 1Tb SATA drive two partitions (splitting the disk in 2) one of these contains windows 7 and I did nothing to this drive (and was careful to do so) After the installation finished the computer restarted and gave me no option for choosing operating systems? what have I done wrong how can this be fixed? I would still like to be able to use Win7 for gaming. Any help on this matter would be greatly appreciated. :)

  Read the article

• Ubuntu installation does not recognize drive partitioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Dualboot 12.04/windows 7 After installation from USB reboot straight to Windows with no option to select ubuntu and no boot loader

  - by Alkatraz

  windows 7 home premium intel i5 2500k CPU ASUSP8Z68-V PRO Motherboard GeForce GTX 570 GPU corsair 120Gb SSD (windows 7 os) WD 1tb HDD I select the USB drive in the BIOS and boot to it and choose install. i select to manually configure partitions, partition the 200gb of unallocated space on my 1Tb HDD into 16Gb swap file 30Gb / extf4 and 154Gb /home extf4. I make sure that the boot loader is installed to corsair 120Gb SSD (where the windows boot is) and installation goes smoothly. When i reboot after install it runs through bios strait into windows. I have tried upwards of a dozen times and i have also tried with linuxmint. I have also redownloaded the ISO and used two different programs to create the live usb. the installation seems to go well as i can see the partitions i have created in the windows device manager after install http://imgur.com/Wp0V1 I currently run lubuntu on my laptop but it is not a dual boot. i'm assuming this is a boot loader issue and i am assuming that inside those partitioned files in my screenshot there is a working OS of ubuntu 12.04 i just have no way of getting to it.

  Read the article

• How to create or recover Windows Bootloader after deleting Ubuntu boot drive

  - by Kincaid

  I have a computer that dual-boots (or tri-boots) Windows 8 Release Preview, Windows 7, and Ubuntu 12.04. Grub boots between Windows 8 and Ubuntu; for which I use primarily. Recently, I decided to remove Ubuntu, as I hardly used it. I deleted the Ubuntu partition accidentally before replacing the Grub bootloader. Now, whenever I want to boot the machine, it gives me the "grub-rescue" prompt -- I am unable to boot into either Windows (8 nor 7), nor Ubuntu (except via USB, of course). I do not have any Windows 7/8 recovery media, so that isn't an option. Please note that after I deleted the Ubuntu partition, I put the PC into hibernate, and then turned it on. This means the C:\ [Windows 8] drive cannot be mounted. I don't know if that is bad, but it definitely doesn't make things better. I am currently booting Ubuntu via USB, in an effort to restore the Windows bootloader. I have looked into using boot-repair to solve the problem using the instructions here, although after attempting to apply the changes, it gave the error: "Please install the [mbr] packages. Then try again." I don't know why I'm getting this error; is there a way to install the 'mbr packages?' I honestly don't know what exactly they are, nor how to install them. Are there any other options I have not yet exhausted to be able to boot back into Windows, in the case that there is a better way? I want to set the bootloader to boot into Windows 8, but booting into either Windows 7 or 8 is fine (I can use EasyBCD from there). Is there a simple solution to this? I've checked BIOS, and I haven't been able to find a way to boot into Windows.

  Read the article

• "Bootmgr is missing...." Upon reboot [closed]

  - by Gabe

  Possible Duplicate: Install/running ubuntu on extarnal HDD with a windows laptop? Ill take you through the steps I did. Sorry if this question has already been resolved, I'm new to Ubuntu and forums in general. I have 2 internal HDDs in my computer, both with Win7. One HDD is my mothers, the other is mine. I did this because she didn't want my games on her computer, and my PCs motherboard took a crap on me, so I set up a dual boot. I also have an external HDD. This is what I am trying to install Ubuntu 12.04 on. I formatted the drive by right clicking it, then selecting "Format". It is now in NTSF format. I downloaded the Windows installer, ran it, and selected "I:/" (my externl hdd) as the install location. The download and installation ran smoothly, and it gave me the reboot prompt. I selected "Reboot now" and my PC rebooted. I was then interrupted by the "Bootmgr is missing. Press CTRL + ALT + DEL TO REBOOT" message. NOTE: I would like to use my HDD for a FULL Ubuntu installation, not the Live (i think thats what its called). I want all my files and settings from Ubuntu saved to the External drive as if it was my only drive. If you need more information just ask. Any help would be appreciated. Thanks in advance.

  Read the article

• Sharing swap space between Windows and Ubuntu

  - by Leftium

  This Linux Swap Space Mini-HOWTO describes how to share swap space between Windows and Linux. Do these instructions still apply to Ubuntu in 2011? How should I modify the steps for Ubuntu? Is there a better approach to sharing swap space? Based on the HOWTO, it seems best to create a dedicated NTFS swap partition: Dedicated so the swap file will be contiguous and remain unfragmented. NTFS so both Windows and Ubuntu can read/write to it. (Or is FAT32 better for this purpose?) Then, configure Ubuntu to prepare the swap space for use by Linux on start up; by Windows on shut down. I want to dual boot Ubuntu and Windows 7 on my X301 laptop. However, my laptop only has a 64 GB SDD, so I would like to conserve as much disk space as possible. update: There is an alternate method using a special driver for Windows that let you use a Linux swap partition for temporary storage like a RAM-disk, but it doesn't seem to be as good...

  Read the article

• Why is Ubuntu offline (except torrents) while Windows is online?

  - by Fahim al Islam

  I am using a static wired connection. Everything was perfect. But suddenly from few hours back I can't access any website. Dropbox, Ubuntu One also can't connect. Ping request is also unsuccessful, but I can download through torrent. I am not trying torrent download and browsing at the same time. So, I think it's not an issue about torrent using all the bandwidth. One important point is that this connection works perfectly on Windows on this same PC (My PC is dual-boot). I have tried the way what izx has suggested (using "sudo sh -c 'echo nameserver 8.8.8.8 /etc/resolv.conf'"), but I'm facing the same problem again. Now I can't even ping 8.8.8.8 and google.com. Though I can ping 74.125.228.2 (which is Google IP address) I can't understand what's happening and why this is happening. I'm new in this website many rules and regulations is unknown to me. So, please don't be bothered for my mistakes. Looking forward for help from anyone. Thanks to all.

  Read the article

• Encrypt SSD or not?

  - by JamesBradbury

  My desktop machine is running Ubuntu 12.04 (and will probably stay with it until the next LTS). I've got a new 120GB SSD on the way as my existing 420GB spinning disk. If it makes any difference I'll be dual-booting with Windows 7 across both disks too. I've read some helpful answers here about /home setup and enabling TRIM, which I intend to follow. So most of my /home will be on the SSD, with only photos, videos and music on the spinning disk. The question is, when I reinstall Ubuntu from CD or USB, whether I should encrypt the SSD? Specifically: I'm reading that drive wear isn't much of an issue with modern SSDs as they last decades even if you spam them. Is this true? How big a performance reduction will encrypting cause (I have an i7 Sandybridge, so I guess it can cope)? Is it more important from a security point of view to encrypt an SSD? I think I read somewhere that it may be hard to reliably wipe data. By all means answer even if you only know about one of those things.

  Read the article

• Why can't I install 10.04 on a system that already has 8.04?

  - by Android Eve

  Ubuntu 10.04 is beautiful. I love it. I am dying to install it on my PC, alongside the existing Ubuntu 8.04 (from which I write this message right now). But... it won't let me! When I reach the partitioning stage (manual!) Ubuntu 10.04 sees my two HDDs as one RAID volume. It doesn't see all the partitions I already have in place in /dev/sda and /dev/sdb. Even Windows 7 doesn't behave like this... (yes, I actually managed to install Windows 7 64-bit in dual-boot configuration with Ubuntu 8.04 on this same system). Note: GParted on Ubuntu 10.04 (live CD) sees the partition intended for Ubuntu 10.04 (/dev/sda4) perfectly, but is unable to format it. Note: I also removed that partition trying to reformat it via GParted once 10.04 LiveCD is loaded. It didn't help. I believe that the problem lies in Ubuntu "deciding for me" that the HDDs should be "seen" as a RAID, hence any partition is seen by GParted as "busy" or "locked". Any idea how to solve this problem?

  Read the article

• Installing Ubuntu along with windows 7 on shrunk partition

  - by Thabo

  I am new to Ubuntu OS and ask Ubuntu community. First this is not a duplicate question. Actually this a question which is a summery of all solutions and questions were posted in this community, related to Install Ubuntu along with Windows 7. I have bought a new Hp laptop with its original windows 7.I want to install Ubuntu along with windows 7 64 bit. I ran the Ubuntu 12.4 Desktop installation CD. But Ubuntu installer doesn't show the "along with windows 7 option"only it is showing two options. I read some questions and answers posted on this community. Specially following link Ubuntu 12.04 does not see windows already install on my computer (dual installation) I tried following thinks, I ran the terminal in live CD and tried sudo dmraid -rE command and dmraid remove command .But terminals says there is no dmraid partitions. So I tried another scenario checked my partitions with g parted.There are some partitions labeled C,HP tools,Recovery and System. C is containing windows 7 Files. So I shrank the volume of C Drive. Now I have 50000Mb of unallocated disk. I tried with Gparted to create a partition on that allocated space.It says some thing that you can't create more than four primary partition.Of course all other four partitions were created on widows are actually type of primary partition. So I went back to Windows 7 and tried to create a new volume on unallocated space.But unfortunately it says,If i create a new volume it will be the type of Dynamic partition.It says we cant boot another OS from that partition. So i cancelled that step. Now i have 50000Mb unallocated space but how can i install Ubuntu on that partition without harming the existing Windows 7? Because still I have only two options: Erase and install Ubuntu. Try something else. (I can see my unallocated space by going to "something else" option.)

  Read the article

• Ubuntu installation does not recognize drive partinioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >