Search Results

Search found 14873 results on 595 pages for 'hard drives'.

Page 38/595 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

  • Removing orphaned iTunes songs from hard drive

    - by JubJub
    Some times when I delete songs from iTunes it does not ask me if I also want to delete it from the hard drive. As a result I have a bunch of songs that are taking up space in my hard drive that are not in iTunes. I have over 3000 files, is there an automated way to find files on the hard drive that are NOT in iTunes? I want to delete them so that they are not taking up space.

    Read the article

  • Recover data from phyiscally damaged harddrive. What are my options?

    - by Michael Kniskern
    I was trying to replace the power supply in my desktop PC and ended up physically damaging the data connection from the hard drive to the motherboard. The plastic shelf for the copper prongs on the hard drive broke into the cable. Here is a picture of my handy work: Picture of damage I went to Best Buy Geek Squad to discuss my options and they said that they will need to send it to the recover center it could cost anywhere between $250 to $1600 USD to recover the data out the hard drive Is this reasonable for data recovery from a phyiscally damaged hard drive? Are there any other options I can explore? I am going to talk to the data doctors to see what my options are.

    Read the article

  • Break a hard link of a file in use

    - by Stebi
    I used hard links to merge duplicated files on my SSD (space is still precious) and now have a weird problem. Common files like msvcr110.dll got hard linked. Now I want to delete a program which has this file in its installation directory. But I cannot because this file (on another location) is used by a currently running application (don't know which) and windows doesn't allow me to delete this file because it's in use. I can rename the file but it still points to the same file, so not possible to delete it. Is there any way to break a the hard link of a file which is currently in use? I currently use a trash folder where I move those files to so I can delete the directory structure of program to be deleted. But I'd like to get rid of this leftover (although it doesn't take much space as it's a hard link).

    Read the article

  • Would hybrid drive work after SSD failure

    - by lulalala
    Hybrid hard drive combines SSD with traditional hard drives. I know that SSD can fail much often than traditional hard drives. So I want to ask that, when the SSD part of the hybrid drive fails, would I still be able to use the traditional hard drive? If it won't work like that, then I will consider add-in SATA cards instead, as it delegates risk much better. EDIT: I guess it differs from model to model, so if yes what models would work. (I am evaluating Seagate DX for now)

    Read the article

  • Can't detect hard drive on Macbook Pro

    - by MartinMoizard
    I changed a few month ago the config of my Macbook Pro with the following: I bought a SSD hard drive I removed the hard drive of my Mac book Pro and installed there my brand new SSD Then I removed my DVD drive and installed my hold hard drive instead with a caddy Everything was working great until today when I couldn't access anymore to my old hard drive because it is not detected anymore. Sometimes Mac OSX is mounting it but it takes like 15 min to browse a simple folder. I opened my laptop to have a look at the problem. It seemed like the optical drive connector was not plugged correctly to the motherboard (that connector: http://cl.ly/2T0X2e1j0J1g47061d1t). So I plugged it correctly and reboot. It didn't fix my problem. Then I tried to put my SSD in the caddy and to boot: no hard drive was detected. So I guess there is something wrong either with the caddy, either with the optical drive connector, or either with the plug that is on the motherboard. So my question is, how can I know where the problem comes from?

    Read the article

  • Windows server detected error with hard disk

    - by user53864
    We have hosting Windows server 2008 R2 and I am working as admin in small company. The server is hanging and restarting as the hard disk seems to be damaged due to power fluctutaion(though having inverter) as it's showing the below error message on server reboot: Problem detected with the hard disk Press any key to continue It's Seagate 1TB SATA hard disk and it's booting after pressing enter. So it's clear that the hard disk is dying. Yes, it's in warranty but it's fact that warranty won't recover the lincesed windows server 2008 and it's data. As it's booting now, I backed up required things and I am thinking to clone the entire hard disk. The first thing it striked me is checking on the Seagate site if any tool available for cloning and I found Seagate DiskWizard but not specified it for windows server 2008. Please anybody could help me giving your best ideas for the below: Urgently, What's the best way(free of cost) for me to clone in my case with the new same sized hard disk? It's a one time lincenced and I cannot use the same key again if I reinstall the server. Will the lincense be carried with new disk if cloned? else there is a way to contact Microsoft explaining the problem occurred, to obtain new key for no charge?. I want to take measure for future. How do I keep two disks in continuous sync? mirrored & raid are the only options converting the disks to dynamic? or is there a best way I could do with no additional charge?. Any help is greatly appreciated. Thank you! EDIT:1 I started cloning the disk with CloneZilla and it was going proper showing in GUI. But after some time there is no GUI but a black screen with some codes(looks like disk location numbers) going page by page(I have attached the screenshots below captured from my phone). Do you people think it's actually cloning?. I started in the morning and it's evening now. I left the office now to let it finish what it's trying to do and I'll go & check it tomorrow. Slowly lost hope, don't know what face it's going to show tomorrow. Any ideas?

    Read the article

  • Are there freezing issues with the Seagate Barracuda ST31500341AS anymore?

    - by Neil
    I found this hard drive on NewEgg: Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive (bare drive) - OEM http://www.newegg.com/Product/Product.aspx?Item=N82E16822148337 And there are quite a few substantial bad reviews about the drive freezing periodically. If you search for a bit, you can find several forums with people having problems, but of course forums don't get updated when resolutions to those problems are found. I'm just wondering, does anyone know what the final verdict regarding the freezing issue with these hard drives is?

    Read the article

  • formating a hard drive for use in an asus aspire one d250

    - by paynes_bay
    I have an Asus Aspire One D250 that's out of warranty and whose hard drive is giving the click of death. I'm trying to use a spare SATA HDD I have but am having some difficulty. I have a USB CD drive that I plugged into the computer but when I tried to boot off of a Windows XP SP3 install CD the hard drive wasn't recognized. I tried to format the hard drive in another computer and then plug the hard drive into the Asus Aspire and although this gets me to the Windows XP loading screen it crashes before it gets into Windows, itself. Even in Safe Mode. I also tried to install Windows XP off of a USB stick but it seemed to hang during the install process. As in the next day it was still in the blue screen installer. Any ideas?

    Read the article

  • optimizing a windows server 2003 storage capacity

    - by Hosni
    I have got a windows server 2003 with partitioned Hard drive 10Go and 80Go, and i want to improve the storage capacity as the little partition 10Go is almost full. So i have got choice between partition the hard drive to equal parts, or set up a new hard drive with better storage capacity.knowing that the server has to be on service as soon as possible. Which one may be the better solution that takes less time and less risks?

    Read the article

  • TrueCrypt partition will no longer mount

    - by sparkyuiop
    I am hoping for some advice to help me out of my situation, with luck. I have a computer running Windows 7 Ultimate x64 with 3 hard disks installed. On my 2TB hard disk 2 (non-system disk) I have 4 partitions. One is for music, another for video, a downloads partition and a 500GB RAW Truecrypt encrypted partition / volume that I had setup to mount with 4 photographs used as keyfiles. The 4 photographs are located in my 'Documents' partition which is one of four partitions on my 1.5TB hard disk 1 (non-system disk) When I setup the disk encryption I did not (I'm 99% sure) create a password, I only used the 4 photograph keyfiles to mount the volume. Recently my 1TB hard disk 0 (system / boot) started to fail so I decided to replace it. I was going to clone the old disk to a new disk but decided that a fresh installation would be more beneficial. Once I had transferred all the required 'User Data' from my old hard disk 0 (C: disk) I discarded it. I reinstalled Truecrypt, pointed to the partition, selected my 4 keyfiles photographs and I mounted my encrypted volume with no issues. In fact I mounted it several times after re-installing Windows and after reboots. Now all of a sudden when I try and mount it I get the message "incorrect keyfile(s) and/or password or not a Truecrypt volume". Now I am not sure why this happened as I do not recall exactly what I did between last mounting the volume successfully and it not mounting. Here are some of the possible things I may have done to cause it to stop working but I am at a loss as to where to start to try and resolve the problem. 1. I had swapped the drive letters to a preferred order. 2. I possibly swapped the physical SATA connectors on the mainboard. 3. I enabled 'Hot Plugging' for the two non-system hard disk SATA ports and the DVD SATA port in the BIOS. I have tried changing the encrypted partition drive letter as suggested in another post but this does not help. On my old system the encrypted drive was drive "X". I have about tried it with all the other free drive letters but alas nothing changes. I do not recall what drive letter was allocated to the encrypted partition before I changed them all. I have not tried to change the letter back to what it possibly was to start with as I am happy with the current layout. I will try this is anyone thinks it would be worthwhile though. I do hope I have managed to convey my situation in an understandable manner and live in hope someone could help me recover years of personal files. Thank you very much for taking the time to read my post and for any suggestions you may offer. Regards Phillip Thorne (UK) Anyone???

    Read the article

  • Western Digital Caviar SE16 not recognized

    - by NStorm
    Before I start, I have been looking at quite a few websites and I still have not found an answer to my problem. I have been building my own computer recently and I have just received the hard drive (WD Caviar SE16 WD5000AAKS) I was planning to put in my computer. After connecting the SATA power cable (99.99999% sure it is connected correctly) and the SATA cable to my motherboard (ASUS M5A78L-M/USB3) I booted my computer into a Linux Mint 13 XFCE 64-bit live USB expecting to see a hard drive when I came to install. Sadly when I checked the only hard drive that was showing was /dev/sda which was my USB with the Linux files on it. I also checked gparted and no hard drive other than my USB was showing up there either. Lastly I checked my BIOS and no matter what SATA port I connected the HDD to it wouldn't show up there either. Does anyone have any advice? Some images of my set-up which could help are bellow: Thanks in advance, Nick

    Read the article

  • Harddrive speed drops a lot!

    - by AZ
    The hard drive is used to do BT with uTorrent. Recently uTorrent began to report there is a "I/O Device error", then I use HD Tune to test it, it turns out the transfer rate is only 16 MB/sec. At the same time, I have a similar hard drive tested, it rates as 120 MB/sec. They are both 7200rpm desktop hard drives. I used chkdsk to fix it but the rate didn't change. Is this a symptom of hard drive failure? Should I backup the content on the disk ASAP or is there any other tool can fix it or diagnosis it?`

    Read the article

  • How Hard Can It Be?

    - by David Totzke
    I mean seriously.  Let’s imagine for a moment that by some stroke of luck or genius or cosmic accident that you come to be the owner of sex.com.  You’d think you had won the lottery.  That would be like having a license to print money.  I mean really.  Sex is the most searched term on the entire Internet.  Even without any SEO you’d think that your site would show up on the first page of results on Google. You would think that; and you’d be wrong.  At least in the case of the current owners of that domain name anyways.  The details can be found here but suffice it to say that Escom LLC has managed to fuck it up.  They’ve been forced into bankruptcy by their creditors.  Something doesn’t smell quite right with the whole thing.  Some guy named Mike Mann (please God, don’t let it be this Mike Mann) is an investor in all three creditors.  WTF? Seriously.  How hard can it be? Dave Just because I can…

    Read the article

  • Partitioning a hard drive before install

    - by yohbs
    I have a new ASUS laptop that I got from the university. The guys at the computing centre recieved it before me, erased the hard disk, and installed all their crappy software (Novel, outlook, and the like). I tried to install Ubuntu with dual boot, but because they apparently did whatever it is they did wrong, and the installer does not recognize the existing windows installation and only suggests to install Ubuntu as a sole OS. None of the advices here or here helped. My final decision is to indeed let Ubuntu erase all existing windows stuff (and then use windows occasionally through VirtualBox). However, when I try to do that it tells me that the partitioning looks like GPT but doesn't have the correct signatures, or something like this. It asks whether this is indeed a GPT HD, and I don't know what to tell it. What I ask is: should I simply use gparted from the CD to repartition the HD? If so, what would be the recommended partitioning (I have 750GB), and the recommended filesystem (ext3? ext4?). Update: here's a screen shot Thanks in advance for any advice.

    Read the article

  • Netbook performs hard shutdown without warning on low battery power

    - by Steve Kroon
    My Asus EEE netbook performs a hard shutdown when it reaches low battery power, without giving any warning - i.e. the power just goes off, without any shutdown process. I can't find anything in the syslog, and no error messages are printed before it happens. I've had this problem on previous (K)Ubuntu versions, and hoped updating to Ubuntu Precise would help resolve the issue, but it hasn't. The option in the Power application for "when power is critically low" is currently blank - the only options are a (grayed-out) hibernate and "Power off". I have re-installed indicator-power to no effect. The time remaining reported by acpi is unstable, as is the time remaining reported by gnome-power-statistics. (For example, running acpi twice in succession, I got 2h16min, and then 3h21min remaining. These sorts of jumps in the remaining time are also in the gnome-power-statistics graphs.) It might be possible to write a script to give me advance warning (as per @RanRag's comment below), but I would prefer to isolate why I don't get a critical battery notification from the system before this happens, so that I can take action as appropriate (suspend/shutdown/plug in power) when I get a notification. Some additional information on the battery: kroon@minia:~$ upower -i /org/freedesktop/UPower/devices/battery_BAT0 native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0A:00/power_supply/BAT0 vendor: ASUS model: 1005P power supply: yes updated: Fri Aug 17 07:31:23 2012 (9 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging energy: 33.966 Wh energy-empty: 0 Wh energy-full: 34.9272 Wh energy-full-design: 47.52 Wh energy-rate: 3.7692 W voltage: 12.61 V time to full: 15.3 minutes percentage: 97.248% capacity: 73.5% technology: lithium-ion History (charge): 1345181483 97.248 charging 1345181453 97.155 charging 1345181423 97.062 charging 1345181393 96.970 charging History (rate): 1345181483 3.769 charging 1345181453 3.899 charging 1345181423 4.061 charging 1345181393 4.201 charging kroon@minia:~$ cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: charging present rate: 332 mA remaining capacity: 3149 mAh present voltage: 12612 mV kroon@minia:~$ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 4400 mAh last full capacity: 3209 mAh battery technology: rechargeable design voltage: 10800 mV design capacity warning: 10 mAh design capacity low: 5 mAh cycle count: 0 capacity granularity 1: 44 mAh capacity granularity 2: 44 mAh model number: 1005P serial number: battery type: LION OEM info: ASUS

    Read the article

  • Ubuntu Server Read-Only Filesystem Issue

    - by Scott Deutsch
    We are running a virtual machine server with multiple virtual machines with ubuntu server edition 12.04 and every so often (usually after updates via webmin it seems), the hard-drive turns into read-only filesystem. Only two of the virtual machines get affected by this problem (that I noticed so far). What could be causing this issue? What could we try to fix this problem? Has anyone else had this problem before? If so, what did you do to fix it? If I use Aptitude instead of webmin, it will not turn into into a read-only filesystem. Though this could be a coincidence. Could it be a webmin issue? Thanks. UPDATE 1 Looks like this is not an update/webmin issue at all. How I know this is because one of the virtual servers is a git server and it turned into a read-only filesystem out of the blue today. With this new info provided to you, what should I try? Thanks.

    Read the article

  • how to install 13.04 on a partitioned hardrive

    - by Denny
    First, not a computer literate person, not even a novice- so please use small words. I recently made the switch to ubuntu, it came preloaded on my new laptop that I order from a big tech dot com site. The version on it is 12.04 (i think) and 64bit. This system has a lot that I like but it is quirky for me to say the least. Apparently I have held broken packages and have no way of knowing how to find them. I discovered this when trying to download (from software center) VLC so that I could watch some movies I had on an external hard-drive. Unmet dependencies error and held broken package errors abound while trying to fix the problem. Ive scoured this site and other and followed almost all the suggestions to a T but still I am unable to fix anything. My computer is partitioned (but I don't even know how to get to the otherside so to speak). I would like to know; can I put the newer 13.04 OS on one side of the partition and then delete the older version on the other side? or, can I install 13.04 over the existing 12.04? What would I need to do this? An obstacle that I have is this, I am currently serving in Afghanistan so going someplace to buy something or running down to a computer store for service support is out of the question. I very much appreciate your help, cause right now this computer is nothing more than a word processor, which would be fine if all i wanted was a word processor. Thanks in advance.

    Read the article

  • Lost files after installing Ubuntu

    - by Joshua Rosato
    I installed Ubuntu on my laptop over windows, I had 2 partitions on one hard disk. It seems like my second partition is gone with all my files. How can I recover the old files? They weren't on the same partition as Windows. I read that the partition has probably just not been mounted so ran sudo fdisk -l to find all the partitions and then ran sudo mount, however I can't tell from the results of sudo mount what is not mounted and I am also unsure how to mount it once I find the unmounted partition. sudo fdisk -l - Results Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002c6dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris sudo mount - Results /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=joshy1)

    Read the article

  • 1.5 TB USB Drive failed to mount

    - by user89348
    Seagate 1.5Tb FreeAgent USB Hard Drive. Formatted FAT32. I figure it is 75% full. Used to work fine in XUBUNTU it shows up in Cairo Dock but when I click on it I get "failed to mount drive'. Nautilus does not display the icon nor does Thunar. Windows Vista will no longer recognise drive either. Back Track 5R3 also no longer fails to mount it. BUT and here is the BIG BUT my Pioneer DV-410 reads the files and plays the everything just fine. I believe this all happened after an unclean shutdown / XUbuntu 12.10 system freeze. Why can't XUBUNTU mount this drive when a crappy 13 year old DVD player can mount it. I am desperate to back up the data before just in case the drive becomes completely unreadable. Using XUBUNTU 12.10 Quantal current 3.5.0.17 Kernel (past 3 Kernels wont read it either) and all newest apt-get update / dist-upgrade are applied. I will post any other info you folks request as needed. Additional info as requested by githlar. $ sudo fsck.vfat /dev/sdb dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN Read 512 bytes at 0:Input/output error $ lsusb Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 002 Device 002: ID 0bc2:3001 Seagate RSS LLC Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    Read the article

  • Boot problems w/ External HDD

    - by JeremyT
    I'm having a problem with booting a live image off of a USB Hard Drive. I used Startup Disk Creator to make an Ubuntu 11.10 live image on a partition on my external so that I can use it on various computers. I set it up with ~4GB of persistent data So far I've tried it on two computers. One, a Dell, will boot to my external but it loads the select boot device very slowly. It hangs on a screen with an underscore for up to 5 minutes until it allows me to select which drive I want to boot from. After that, it works great. However, on my primary computer it doesn't work at all. It's an Acer from 2009 and it won't even recognize the drive. I don't see it anywhere in BIOS or the select boot disk list. The light on the external will come on at boot just fine so I know it's powering it at this time. Both computers worked perfectly with my 4GB flash drive that I had partitioned half and half (1st half FAT32 and second Ubuntu 11.10 live)

    Read the article

  • How to view/mount other partitions on your hard drive

    - by Preston Zacharias
    Recently I have installed Ubuntu 12.04 Beta 2 on a USB flash drive and decided to install it on an old external HDD which I have taken out of the casing and succesfully mounted in my desktop computer. There is no other operating system besides the newly install Ubuntu. However, there is about 500gb of data on the drive. This is why i used a partitioning software on my windows 7 netbook to partition the hard drive to set aside 1tb for files, 350gb of space for linux and the remaining 650gb for Vista which i plan on installing soon. But this is where the problem sets in...when installing Ubuntu it does not recognize that the drive is partitioned at all, it's just one big open block of space...so I used the installers built in partitioning feature to set aside 300gb for main Ubuntu install and 50gb for swap space. I set both of these partitions to be created at the "end" so that it wouldn't delete or write over my data. And this is where i am really lost; when booting into Ubuntu i am able to use it perfectly fine, got on internet, etc...but i have NO CLUE as to how i can view files that were previously on the drive (all of my data that i had prior to install). How can I mount/be able to view the other partition so that i can have access to my data? Thank you ahead of time! I REALLY appreciate any help or advice! ~Preston

    Read the article

  • How to decide if I should take a profit sharing offer or insist on hard cash

    - by Icode4food
    I am currently the sole developer at the very beginning stages of what I think could be a successful startup. My question is simply how to go about determining if I am interested in accepting a permanent stock in the enterprise or if I should insist on hard cash. This startup is seeking venture capital and it is looking likely that they will get something, I don't know how much. I know very little about the business plan or financial operations at all. The founders have experience with other startup type devours that have been successful. From a business perspective I have a reasonable amount of confidence in them. However, I have never met them face to face. They have offered me a partnership in the project but I'm fairly confident that I don't want to do that. I have done some work for them and they really like me so I'm not to afraid of loosing the position all together. I am a young developer with no experience with this sort of thing and need some experience to point me in the right direction. How to I begin to evaluate how much stock or what percentage of the profit should I ask for? Any suggestions at all would be appreciated! P.S. Any suggestions for better tags?

    Read the article

  • Why does my root filesystem keep becoming read-only?

    - by Scott Severance
    I've lately been having an issue with my root filesystem becoming readonly. It happens some amount of time after boot. I don't know exactly when it happens, as I don't usually notice it until something such as suspending the computer or printing fails. It seems to be fairly random. Since most of my system is on that partition, I can't re-mount it without rebooting. After this happens, the system runs a fsck. Sometimes it prompts to fix problems; other times it apparently finds none. To troubleshoot, I've searched through the logs but found nothing relevant. This might be due in part to not knowing when the actual errors took place. The filesystem is apparently good to begin with, as when fsck runs its fixes it doesn't report any errors. I've scanned the disk with SpinRite. A while ago, SpinRite found and recovered from some bad sectors on the hard drive. I ran a level 4 scan (a thorough scan) after this probem appeared, but SpinRite found nothing. The SMART data reports that the disk is OK with 63 bad sectors. The number of bad sectors hasn't changed recently. I realize that the disk isn't in the best of conditions, and I have complete backups in case of catastrophic failure. Yet the lack of errors in the logs, combined with SpinRite's test results and the unchanged SMART data makes me think that this problem has some cause other than disk failure. Other than disk failure, what could cause my symptoms?

    Read the article

  • Screen going black, further investigation reveals healthy ram and hard disk, and several kernel oops logs

    - by Virulan
    Six days ago, I went to go take a shower, and I suspended Ubuntu as usual, to save battery life. I came back, and the screen was black. REISUB and general fiddling around did nothing. Restarted, and still had nothing on the screen. Since then, this has happened several times, and the only fix is to 1) force shut laptop, 2) take out battery, 3) hold power button, 4) put battery back in, 5) boot. I have investigated further into the matter, doing a ram test and a hard disk check. Both turned out fine, but then my attention turned towards the error messages I was receiving upon bootup, the whole "System program problem detected" dealio. I did some digging and found four kernel oops logs in my /var/crash. What I can understand of them points to two things, 1) they are connected to my suspending problems, since there are four them (I have had four suspending crashes), and they both confirm that there was a issue with waking up from suspend, and 2) the crashes might have to do with Python (possibly could be jumping to conclusions), since mentions of Python are peppered throughout the logs. At this point, I am unsure of how to continue, and I have come here for help. Is there any way I can fix this? Should I start by uploading the logs here?

    Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >