Search Results

Search found 14873 results on 595 pages for 'hard drives'.

Page 45/595 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• Cannot copy anything onto WD Elements 1TB External USB HDD

  - by Aashish Vaghela

  I have a Western Digital 1023 Elements 1TB External USB HDD. Recently, it has started an unusual problem. I cannot copy any file of any size on to that 1TB hard-drive, eventhough it has more than 400 GB free (out of 931GB actual size). I tried copying movies from one friends laptop, which did not work. I also tried another desktop to copy some study material e-books (in PDF), which also did not work. I get same CRC error when I try to copy anything from a computer's hard-drive onto this WD 1TB hard-drive. Vice-versa it's working. I mean, I can copy any file from the USB HDD onto local machine's HDD on any computer. It's like one-way traffic. This HDD is only 1 year old. What are my options ? Any suggestions ? Regards, Aashish.V

  Read the article

• Slow writing HDD speed, Ubuntu 12.04 64-bit, Thinkpad T520i

  - by pyc

  It seems that (but I'm not completely sure), that when I'm copying files from gigabit network to HDD, I can't use full potential of the network which in my case is about 60 MB/s, because HDD writing is so slow like lower than 10 MB/s, and also it's slowing down the whole system which becomes pretty much unresponsive, almost impossible to work with. Copying files to samba share residing at Ubuntu machine, connected to share from Windows 7, I'm completely sure my network equipment is OK, and there's no CPU intensive process on Ubuntu except smbd getting about 10-20% from time to time which I think is OK. Something here is burried deep I think, maybe even in kernel. Already tried to switch from AHCI to compatibility mode, and turning acpi on and off - nothing helped. So it's like HDD buffer is full and emptying slowly while machine is sluggish, load is about 3 to 4. Somebody experienced the similar problems? Some help on troubleshooting process and identifying the cause would be helpful too :) Thanks!

  Read the article

• Resize hard drive partition to make more space for /var

  - by user3357381

  I am running out of space in the /var partition. I have plenty of space in my /home partition. How do I shrink the /home partition to make more space for the /var partition? I have read some blogs that say to use the GParted Live CD. As a new user, I'm not quite sure if this is the ideal route. What is the best way to create more space for /var ? Output of df -h : Filesystem Size Used Avail Use% Mounted on /dev/sda2 19G 7.1G 11G 41% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 7.9G 8.0K 7.9G 1% /dev tmpfs 1.6G 1.5M 1.6G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.9G 624K 7.9G 1% /run/shm none 100M 60K 100M 1% /run/user /dev/sda4 454M 75M 352M 18% /boot /dev/sda5 2.3G 2.1G 36M 99% /var /dev/sda3 178G 1.3G 168G 1% /home /dev/sda6 2.8G 5.8M 2.6G 1% /tmp /dev/sdb1 3.7T 401G 3.3T 11% /hdd

  Read the article

• iTunes + External Hard Drive problem

  - by Samwho

  Okay, so I've always stored my music on my external hard drive and run it from there with iTunes. Recently, however, it's being a little awkward. I think it was because I accidentally tried to run a song off my hard drive when it wasn't plugged in and, as would be expected, it said it couldn't find it. So I plug the hard drive in, locate the file and off it goes. But now it won't find any of the files... When I go to the "Get Info" page on the right click menu on a song I notice it has prepended file://localhost/ to everything, so my paths look like this: "file://localhost/E:/Sam/Media/Music/[song name]" I went into the iTunes Music Library.xml file and did a search and replace for file://localhost/ and replaced it with nothing and tried opening iTunes again and it just added file://localhost/ to every file again! Anyone have any idea why it does this and how to fix it without reimporting my library?

  Read the article

• Installing Ubuntu via Wubi - about SSDs and HDDs

  - by A Person

  I read the question in regards to installing Ubuntu with Wubi on an SSD ( How do I enable Trim on an SSD in a Wubi install under Windows 7? ). My Windows installation is on an SSD (C: drive). My question is, if I choose to let Wubi install Ubuntu on my D: drive (HDD), thus creating the root.disk-file on D:, would I need to worry about TRIM in any way? I would assume not, but I just want to be sure.

  Read the article

• How to disable low disk space notification? (Gnome 3, Ubuntu 12.04)

  - by grimripper

  I've got an SSD drive for root and /home, and a larger HDD for storage. The storage disk is almost full, and there's a low disk space warning on startup. The warning doesn't have any "don't show again" option, only "ignore" and "examine". It also doesn't go away but sticks on the screen until the ignore button is clicked, so it's very annoying in addition to being competely unnecessary. I tried unselecting the storage HDD in baobab's settings, but that didn't have any effect. I also tried gconf-editor, and looked for apps - gnome_settings_daemon - plugins - housekeeping, but there is no "plugins" under "gnome_settings_daemon". Only "gtk-modules" and "keybindings". Gnome 3.4.2.1 Ubuntu 12.04.1 LTS 64-bit

  Read the article

• Odd issue,Wubi Installation won't boot, when another ext4 drive is plugged?

  - by Uri Herrera

  It's an odd issue, i installed Ubuntu 11.04 trough Wubi yesterday,it actually worked unlike the last time i tried to when it didn't boot at all. But there is one thing that bugs me, see, i have 2 HDD's ,a 320GB one with Windows 7, and the other, a 500GB HDD with Ubuntu 10.10. I have partitioned the 500GB HDD, and contains a NTFS partition, and a EXT4 plus the Swap partitions. The 320GB is not partitioned, as it only has Windows 7. Since i installed Wubi on Windows 7, when i have my Ubuntu drive connected, Wubi won't boot the installation, giving me a "no wubdir" error. However, if i phisically unplug the Ubuntu drive, then Wubi boots just fine. So, how is the Ubuntu drive interfering with Wubi, to the extent of Wubi not even working when the drive is plugged?.

  Read the article

• Mounting hard-drive on boot

  - by Kicsi Mano

  I had 2 HDD, today I bought a new one, I would like to mount this HDD at boot, it's working, but the new HDD mounted under robu not root, why? Content of the fstab: UUID=8e492a04-c05d-4861-b996-a36ebbaf3d43 /media/WESYS_RAID ext4 rw 0 0 UUID=12C81F25C81F071F /media/WESYS_DATA ntfs defaults,iocharset=utf8 0 0 /dev/mapper/WeSyS_LVM /media/WESYS_LVM ext4 rw 0 0 This is the rights. drwxrwxrwx 1 root root 4096 2012-04-05 11:51 WESYS_DATA drwxr-xr-x 9 root root 4096 2012-03-01 10:11 WESYS_LVM drwx------ 3 robu robu 4096 2012-04-10 12:33 WESYS_RAID

  Read the article

• How to eliminate an old Ubuntu partition?

  - by GUI Junkie

  I installed Ubuntu 12.04 64-bit side by side with my previous 11.10 32-bit. As everything is working correctly, I want to eliminate the old partition. According to update-grub: Found Ubuntu 11.10 (11.10) on /dev/sda1 But according to GParted, /dev/sda1 is the boot partition! So, how can I discover which partition should be the boot partition for 12.04? Can I safely eliminate the /dev/sda1? Also, GParted gives /dev/sda5 as file system unknown, it's 2.93Gib and might be the swap partition (just guessing).

  Read the article

• raid advice with SSD and two HDD

  - by Nin

  I have a new machine with one 128GB SSD and two 1TB HDD. On the SSD is the OS and my initial thought was to put the two HDD in RAID 1 for user data. After some more thought I came up with two other setups and now I'm in doubt :) Can someone advise what would be the best setup? 1: single SSD and HDD in RAID 1 (original thought) 2: Create 2 partitions on the HDD (128GB and 872GB). Put the two 872GB in RAID 1 and create another RAID 1 with the SSD and one 128GB HDD partition. 3: Create 2 partitions on the HDD (750/250), put the 705GB in RAID 1 and use the 2 250GB as backup and make automatic snapshots of the SSD to (one of) these partitions. I think the 2 main questions are: Is it advisable to create a raid array with only part of a drive and actively use the other part of that drive or should you always use the full disk? Is it advisable to create a raid 1 array with a SSD and HDD or will that blow the whole speed advantage of the SSD?

  Read the article

• Search Engine Traffic Isn't As Hard As You Might Think

  A lot of people think that since they don't get a lot of traffic in their site, they think that it's useless and hence they give up. Your search engine rankings will differ according to the amount of traffic you get. So getting traffic is the first thing you need to do.

  Read the article

• cant recognize the path of hard drive which is not a part of an array

  - by Abhishek

  hi there, I have a problem on my server as below.. On my server i configured a raid array of 3 hard disks, in my c drive their is a web applications running on Apache Tomcat server. Now because of shortage of storage i entered a new hard disk to the server which is not a part of that raid array. Now through my web application i upload some images to new hard drive and file uploaded successfully but when through that same application, i try to retrieve those images and show on a web site i does not recognize that and dose not give any error. i try to access that drive with absolute path but it not works. Can any one help me to find the solution of this problem? Thank You in advance.

  Read the article

• Ubuntu made my second HDD disappear from the BIOS!

  - by RWLarsen

  My netbook, an ASUS 1015PX, shipped with two harddrives. After switching to Ubuntu, the second drive isn't recognized by the OS or the BIOS. I've never formatted the second drive, so it's still set up for use by Windows. I guess I don't care about the data on the drive, I'd just like to be able to use it again. It's probably also worth mentioning that I'm very new to any form of Linux, so I'm remarkably new to the Terminal.

  Read the article

• Will installing an Ultra ATA cable backwards affect performance?

  - by GMMan

  I've recently purchased a hard drive upgrade for my Xbox 320GB WD Caviar Blue WD3200AAJB and StarTech.com Ultra ATA/66/100/133 cable IDE66 yes I'm crazy When it came to installing the cable, it was too short (my fault), and there wasn't enough space between the master and slave ends to reach both the DVD drive and the hard drive. The only thing I could do was install the cable backwards and twisting it quite a bit to make it fit. The upgrade works, but reading the manual for the hard drive I replaced (10GB Seagate U Series 5), apparently there is a specific way you have to connect the cable. I don't have that option, so the question comes down to, will my drive performance be at Ultra ATA levels, or is it still performing at original ATA speeds? Is there any way I can test this (benchmarking software for Xbox)?

  Read the article

• Ubuntu 11.10 USB 3.0 HDD

  - by Chazm

  I have a problem with my external HDD (WD My Book Essential 1TB) working on USB 3.0 port. I'm using dual boot setup with Windows 7 and Ubuntu 11.10, both 64 bit. While I'm running Windows and rebooting back to Windows everything works well. When I'm switchin to ubuntu everything works great as well. But after 1st reboot from ubuntu neither windows nor ubuntu mount the external drive. I have to reboot the device manually. I suspect that the problem is with unmounting the device on shutdown on ubuntu. The case concern only usb 3.0. When i plug the same device into usb 2 port the problem doesn't persist. Does any1 hit the same problem or have a clue what might goin wrong?

  Read the article

• Hitching and Slowness Due to HDD Activity on Ubuntu, But Not Windows?

  - by Espionage724

  It's been bothering me for months now, but I've noticed in Ubuntu (or any distro of Linux I've tried), any major I/O activity will cause hitching and general slowness. For example, if I try doing a file transfer from my network computer to the computer I'm using and try moving the mouse after a while, it might not respond for a second or so. Similar incidents occur in other cases too (right-clicking to get a context menu takes a few seconds, hitting the drop-down application bar takes a while, etc). My HDD isn't top-notch (a WD Blue 500GB 7200RPM drive) but I don't recall it being nearly this bad in Windows 7, 8, or 8.1. CPU activity during file transfers is relatively low (less than 10-20% on all cores of a Phenom II X4 @ 3.3Ghz). I'm using Gnome System Monitor (on Xubuntu) and can't seem to see what kind of HDD activity is occurring though. I have 8GB of RAM too, which is moderately being used (2.5GB), but shouldn't be a problem either. Any ideas what's up? I've tried kernels between 3.8 and 3.11 (i'm using saucy currently with 3.11).

  Read the article

• Installed Windows 7 without formatting disk? Possible?

  - by ile

  I've just installed Win7 but I'm little confused. When booting from XP cd, there is an option to format hard drive. After choosing which partition to format, format process takes usually not less than hour (depends on size of partition), but when I clicked on Format when in Windows 7 installation interface, I received some message (I cant remember what was it, but it was not any error message or something like that) and that was it. After that I choose to install Windows 7 and installation began. "Expanding Windows Files" was the longest process of installation. Was that the part when the hard drive was formatted? I don't understand what happened? Is it possible that my hard drive was not formatted but still installation was successful?

  Read the article

• Configuring partitions during install

  - by gen

  I'd like to install Ubuntu on my computer. I have a 500GB HDD with the following partitions: (at least what the Ubuntu installer shows): / - Windows 7 (loader) - 100GB - 400GB I'd like to install Ubuntu to the 100GB partition as on the 400GB I have Windows. But I have problems with the following: Whether I can set a swap particion without messing up my Windows. Which file system to set to the partition. Please tell me what and how to do it in the installer.

  Read the article

• recovering vm data from crashed XenServer install

  - by user58983

  We're using xenserver 5.6 from citrix to run our virtual machines. The box is old and creaky, and the hard drive went. (We had a super limited budget of $0 at the time). Turns out the only machine on there we actually needed, was the only one not backed up... anyway, we've replace the hard drive, and reinstalled xensever. however while trying to find our old vm disk images, i have no idea where they sit, and i'm beginning to think they're on a lvm partition? is there anyway to access the disk images from the old vm's on this hard disk, which is attached to the xenserver machine via a usb-sata converter?

  Read the article

• External hdd boot entries added to GRUB after upgrade to 13.10

  - by Jason

  Long story short, I was using my laptop's internal HDD as an external one on my desktop, and I forgot to remove it when I was upgrading to 13.10. Now GRUB on my desktop has added entries for the Windows and Ubuntu partitions that exist on the laptop's HDD, but I don't want them to be there. Can I safely remove them ? My GRUB table looks like this if I recall correctly: Ubuntu Advanced Options (or something like this) Memtest Another Memtest Entry Windows 7 (loader) on /dev/sda1 Windows 7 (loader) on /dev/sdb1 Ubuntu 13.04 Advanced Options for Ubuntu 13.04 Where Windows 7 (loader) on /dev/sdb1 Ubuntu 13.04 Advanced Options for Ubuntu 13.04 are the entries from the external/laptop's HDD.

  Read the article

• USB 3.0 randomly disconnecting and reconnecting

  - by user1624552

  I had an old laptop that died so I have bought a new one. I have taken the 2.5 SATA hard drive from the old laptop and I have put it into an external 2.5 SATA enclosure usb 3.0 and I connect it to the new laptop. My new laptop has Windows 8 64 bit installed. When I connect the external hard drive to the new laptop throught USB 3.0 port, it gets randomly disconnecting and reconnecting continuously, even when I am not using it. Also happens if I connect to another usb 3.0 port. Also I have observed that If I connect the external hard drive to a USB 2.0 port instead of an USB 3.0 port all work ok, no randomly disconnection and reconnection occurs. It only happens when I connect it to an USB 3.0 port. Some ideas to solve this issue?

  Read the article

• run ubuntu from virtual box in an external hard drive

  - by Bhavan

  I would like to run ubuntu on my external hard drive. I have got virtual box installed in the external hard drive and made a machine named ubuntu and installed the latest ubuntu version which i got from the .iso download. Now after much juggling around i got ubuntu running on the machine which i did the whole installation. When i move it to another machine the virtual box just woudnt open. What is the reason for this and how can i get the ubuntu run from whichever machine i plug in the external usb hard disk. Thanks a lot for your answers in advance. Best regards Bhavan

  Read the article

• External hard disk not showing up as removable media

  - by mark

  Windows 7 Pro x64, my external hard drive is a Western Digital Carviar Black. The hard drive is connected via USB (tried all my 2.0 and 3.0 ob my Gigabyte GA-X58A-UD7) but once I initialized it in the "disk management" (or whatever the proper term is; I'm using a German edition of Windows) I have to assign it a manual drive letter. Otherwise it doesn't show up. I'm confused because usually externally connected drives (be it USB sticks or real hard disks) just show up as "Removable media", but this one doesn't. Is this OK/expected? Will there be troubles when I go to another Windows computer? I formatted the drive with quick format and NTFS. I changed the permissions to have read/write for "Everyone" on that drive. thanks

  Read the article

• Why is my hard drive mounted on /boot?

  - by divided

  I was doing an update and it said that the drive was full. Here is df -h: Filesystem Size Used Avail Use% Mounted on 78G 2.7G 72G 4% / none 242M 184K 242M 1% /dev none 247M 0 247M 0% /dev/shm none 247M 48K 247M 1% /var/run none 247M 0 247M 0% /var/lock none 247M 0 247M 0% /lib/init/rw /dev/sda1 228M 225M 0 100% /boot How can I fix /dev/sda1 being mounted on /boot?

  Read the article

• Maxtor OneTouch Hardisk Not Recognised

  - by user8960

  I have a Maxtor OneTouch External Harddisk 160gb that i purchased recently. At first my Ubuntu 10.10 could not mount it. I opened disk utility which recognized it but with no filesystem. I proceeded to try formatting it but this error popped up Blockquote Error creating partition table: helper exited with exit code 1: Error calling fsync(2) on /dev/sdb: Input/output error Blockquote I resorted to Gparted. Things turned worse; it wasn't even listed in the list of devices. Does anyone have a solution to this problem? Any help is appreciated.

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >