Search Results

Search found 972 results on 39 pages for 'highest'.

Page 38/39 | < Previous Page | 34 35 36 37 38 39  | Next Page >

• Taking web sites offline for demonstration

  While working in software development in general, and in web development for a couple of customers it is quite common that it is necessary to provide a test bed where the client is able to get an image, or better said, a feeling for the visions and ideas you are talking about. Usually here at IOS Indian Ocean Software Ltd. we set up a demo web site on one of our staging servers, and provide credentials to the customer to access and review our progress and work ad hoc. This gives us the highest flexibility on both sides, as the test bed is simply online and available 24/7. We can update the structure, the UI and data at any time, and the client is able to view it as it suits best for her/him. Limited or lack of online connectivity But what is going to happen when your client is not capable to be online - no matter for what reasons; here are some more obvious ones: No internet connection (permanently or temporarily) Expensive connection, ie. mobile data package, stay at a hotel, etc. Presentation devices at an exhibition, ie. using tablets or iPads Being abroad for a certain time, and only occasionally online No network coverage, especially on mobile Bad infrastructure, like ie. in Third World countries Providing a catalogue on CD or USB pen drive Anyway, it doesn't matter really. We should be able to provide a solution for the circumstances of our customers. Presentation during an exhibition Recently, we had the following request from a customer: Is it possible to let us have a desktop version of ResortWork.co.uk that we can use for demo purposes at the forthcoming Ski Shows? It would allow us to let stand visitors browse the sites on an iPad to view jobs and training directory course listings. Yes, sure we can do that. Eventually, you might think why don't they simply use 3G enabled iPads for that purpose? As stated above, there might be several reasons for that - low coverage, expensive data packages, etc. Anyway, it is not a question on how to circumvent the request but to deliver a solution to that. Possible solutions... or not? We already did offline websites earlier, and even established complete mirrors of one or two web sites on our systems. There are actually several possibilities to handle this kind of request, and it mainly depends on the system or device where the offline site should be available on. Here, it is clearly expressed that we have to address this on an Apple iPad, well actually, I think that they'd like to use multiple devices during their exhibitions. Following is an overview of possible solutions depending on the technology or device in use, and how it can be done: Replication of source files and database The above mentioned web site is running on ASP.NET, IIS and SQL Server. In case that a laptop or slate runs a Windows OS, the easiest way would be to take a snapshot of the source files and database, and transfer them as local installation to those Windows machines. This approach would be fully operational on the local machine. Saving pages for offline usage This is actually a quite tedious job but still practicable for small web sites Tool based approach to 'harvest' the web site There quite some tools in the wild that could handle this job, namely wget, httrack, web copier, etc. Screenshots bundled as PDF document Not really... ;-) Creating screencast or video Simply navigate through your website and record your desktop session. Actually, we are using this kind of approach to track down difficult problems in order to see and understand exactly what the user was doing to cause an error. Of course, this list isn't complete and I'd love to get more of your ideas in the comments section below the article. Preparations for offline browsing The original website is dynamically and data-driven by ASP.NET, and looks like this: As we have to put the result onto iPads we are going to choose the tool-based approach to 'download' the whole web site for offline usage. Again, depending on the complexity of your web site you might have to check which of the applications produces the best results for you. My usual choice is to use wget but in this case, we run into problems related to the rewriting of hyperlinks. As a consequence of that we opted for using HTTrack. HTTrack comes in different flavours, like console application but also as either GUI (WinHTTrack on Windows) or Web client (WebHTTrack on Linux/Unix/BSD). Here's a brief description taken from the original website about HTTrack: HTTrack is a free (GPL, libre/free software) and easy-to-use offline browser utility. It allows you to download a World Wide Web site from the Internet to a local directory, building recursively all directories, getting HTML, images, and other files from the server to your computer. HTTrack arranges the original site's relative link-structure. Simply open a page of the "mirrored" website in your browser, and you can browse the site from link to link, as if you were viewing it online. And there is an extensive documentation for all options and switches online. General recommendation is to go through the HTTrack Users Guide By Fred Cohen. It covers all the initial steps you need to get up and running. Be aware that it will take quite some time to get all the necessary resources down to your machine. Actually, for our customer we run the tool directly on their web server to avoid unnecessary traffic and bandwidth. After a couple of runs and some additional fine-tuning - explicit inclusion or exclusion of various external linked web sites - we finally had a more or less complete offline version available. A very handsome feature of HTTrack is the error/warning log after completing the download. It contains some detailed information about errors that appeared on the pages and the links within the pages that have been processed. Error: "Bad Request" (400) at link www.resortwork.co.uk/job-details_Ski_hire:tech_or_mgr_or_driver_37854.aspx (from www.resortwork.co.uk/Jobs_A_to_Z.aspx)Error: "Not Found" (404) at link www.247recruit.net/images/applynow.png (from www.247recruit.net/css/global.css)Error: "Not Found" (404) at link www.247recruit.net/activate.html (from www.247recruit.net/247recruit_tefl_jobs_network.html) In our situation, we took the records of HTTP 400/404 errors and passed them to the web development department. Improvements are to be expected soon. ;-) Quality assurance on the full-featured desktop Unfortunately, the generated output of HTTrack was still incomplete but luckily there were only images missing. Being directly on the web server we simply copied the missing images from the original source folder into our offline version. After that, we created an archive and transferred the file securely to our local workspace for further review and checks. From that point on, it wasn't necessary to get any more files from the original web server, and we could focus ourselves completely on the process of browsing and navigating through the offline version to isolate visual differences and functional problems. As said, the original web site runs on ASP.NET Web Forms and uses Postback calls for interaction like search, pagination and partly for navigation. This is the main field of improving the offline experience. Of course, same as for standard web development it is advised to test with various browsers, and strangely we discovered that the offline version looked pretty good on Firefox, Chrome and Safari, but not in Internet Explorer. A quick look at the HTML source shed some light on this, and there are conditional CSS inclusions based on the user agent. HTTrack is not acting as Internet Explorer and so we didn't have the necessary overrides for this browser. Not problematic after all in our case, but you might have to pay attention to this and get the IE-specific files explicitly. And while having a view at the source code, we also found out that HTTrack actually modifies the generated HTML output. In several occasions we discovered that <div> elements were converted into <table> constructs for no obvious reason; even nested structures. Search 'e'nd destroy - sed (or Notepad++) to the rescue During our intensive root cause analysis for a couple of HTML/CSS problems that needed some extra attention it is very helpful to be familiar with any editor that allows search and replace over multiple files like, ie. sed - stream editor for filtering and transforming text on Linux or my personal favourite Notepad++ on Windows. This allowed us to quickly fix a lot of anchors with onclick attributes and Javascript code that was addressed to ASP.NET files instead of their generated HTML counterparts, like so: grep -lr -e '.aspx' * | xargs sed -e 's/.aspx/.html?/g' The additional question mark after the HTML extension helps to separate the query string from the actual target and solved all our missing hyperlinks very fast. The same can be done in Notepad++ on Windows, too. Just use the 'Replace in files' feature and you are settled. Especially, in combination with Regular Expressions (regex). Landscape of browsers Okay, after several runs of HTML/CSS code analysis, searching and replacing some strings in a pool of more than 4.000 files, we finally had a very good match of an offline browsing experience in Firefox and Chrome on Linux. Next, we transferred that modified set of files to a Windows 8 machine for review on Firefox, Chrome and Internet Explorer 7 to 10, and a Mac mini running Mac OS X 10.7 to check the output on Safari and again on Chrome. Besides IE, for reasons already mentioned above, the results were identical. And last but not least it was about to check web site on tablets. Please continue to read on the following articles: Taking web sites offline for demonstration on Galaxy Tablet Taking web sites offline for demonstration on iPad

  Read the article

• C#: Handling Notifications: inheritance, events, or delegates?

  - by James Michael Hare

  Often times as developers we have to design a class where we get notification when certain things happen. In older object-oriented code this would often be implemented by overriding methods -- with events, delegates, and interfaces, however, we have far more elegant options. So, when should you use each of these methods and what are their strengths and weaknesses? Now, for the purposes of this article when I say notification, I'm just talking about ways for a class to let a user know that something has occurred. This can be through any programmatic means such as inheritance, events, delegates, etc. So let's build some context. I'm sitting here thinking about a provider neutral messaging layer for the place I work, and I got to the point where I needed to design the message subscriber which will receive messages from the message bus. Basically, what we want is to be able to create a message listener and have it be called whenever a new message arrives. Now, back before the flood we would have done this via inheritance and an abstract class: 1:  2: // using inheritance - omitting argument null checks and halt logic 3: public abstract class MessageListener 4: { 5: private ISubscriber _subscriber; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber) 11: { 12: _subscriber = subscriber; 13: _messageThread = new Thread(MessageLoop); 14: _messageThread.Start(); 15: } 16:  17: // user will override this to process their messages 18: protected abstract void OnMessageReceived(Message msg); 19:  20: // handle the looping in the thread 21: private void MessageLoop() 22: { 23: while(!_isHalted) 24: { 25: // as long as processing, wait 1 second for message 26: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 27: if(msg != null) 28: { 29: OnMessageReceived(msg); 30: } 31: } 32: } 33: ... 34: } It seems so odd to write this kind of code now. Does it feel odd to you? Maybe it's just because I've gotten so used to delegation that I really don't like the feel of this. To me it is akin to saying that if I want to drive my car I need to derive a new instance of it just to put myself in the driver's seat. And yet, unquestionably, five years ago I would have probably written the code as you see above. To me, inheritance is a flawed approach for notifications due to several reasons: Inheritance is one of the HIGHEST forms of coupling. You can't seal the listener class because it depends on sub-classing to work. Because C# does not allow multiple-inheritance, I've spent my one inheritance implementing this class. Every time you need to listen to a bus, you have to derive a class which leads to lots of trivial sub-classes. The act of consuming a message should be a separate responsibility than the act of listening for a message (SRP). Inheritance is such a strong statement (this IS-A that) that it should only be used in building type hierarchies and not for overriding use-specific behaviors and notifications. Chances are, if a class needs to be inherited to be used, it most likely is not designed as well as it could be in today's modern programming languages. So lets look at the other tools available to us for getting notified instead. Here's a few other choices to consider. Have the listener expose a MessageReceived event. Have the listener accept a new IMessageHandler interface instance. Have the listener accept an Action<Message> delegate. Really, all of these are different forms of delegation. Now, .NET events are a bit heavier than the other types of delegates in terms of run-time execution, but they are a great way to allow others using your class to subscribe to your events: 1: // using event - ommiting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private bool _isHalted = false; 6: private Thread _messageThread; 7:  8: // assign the subscriber and start the messaging loop 9: public MessageListener(ISubscriber subscriber) 10: { 11: _subscriber = subscriber; 12: _messageThread = new Thread(MessageLoop); 13: _messageThread.Start(); 14: } 15:  16: // user will override this to process their messages 17: public event Action<Message> MessageReceived; 18:  19: // handle the looping in the thread 20: private void MessageLoop() 21: { 22: while(!_isHalted) 23: { 24: // as long as processing, wait 1 second for message 25: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 26: if(msg != null && MessageReceived != null) 27: { 28: MessageReceived(msg); 29: } 30: } 31: } 32: } Note, now we can seal the class to avoid changes and the user just needs to provide a message handling method: 1: theListener.MessageReceived += CustomReceiveMethod; However, personally I don't think events hold up as well in this case because events are largely optional. To me, what is the point of a listener if you create one with no event listeners? So in my mind, use events when handling the notification is optional. So how about the delegation via interface? I personally like this method quite a bit. Basically what it does is similar to inheritance method mentioned first, but better because it makes it easy to split the part of the class that doesn't change (the base listener behavior) from the part that does change (the user-specified action after receiving a message). So assuming we had an interface like: 1: public interface IMessageHandler 2: { 3: void OnMessageReceived(Message receivedMessage); 4: } Our listener would look like this: 1: // using delegation via interface - omitting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private IMessageHandler _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, IMessageHandler handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // handle the looping in the thread 19: private void MessageLoop() 20: { 21: while(!_isHalted) 22: { 23: // as long as processing, wait 1 second for message 24: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 25: if(msg != null) 26: { 27: _handler.OnMessageReceived(msg); 28: } 29: } 30: } 31: } And they would call it by creating a class that implements IMessageHandler and pass that instance into the constructor of the listener. I like that this alleviates the issues of inheritance and essentially forces you to provide a handler (as opposed to events) on construction. Well, this is good, but personally I think we could go one step further. While I like this better than events or inheritance, it still forces you to implement a specific method name. What if that name collides? Furthermore if you have lots of these you end up either with large classes inheriting multiple interfaces to implement one method, or lots of small classes. Also, if you had one class that wanted to manage messages from two different subscribers differently, it wouldn't be able to because the interface can't be overloaded. This brings me to using delegates directly. In general, every time I think about creating an interface for something, and if that interface contains only one method, I start thinking a delegate is a better approach. Now, that said delegates don't accomplish everything an interface can. Obviously having the interface allows you to refer to the classes that implement the interface which can be very handy. In this case, though, really all you want is a method to handle the messages. So let's look at a method delegate: 1: // using delegation via delegate - omitting argument null checks and halt logic 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private Action<Message> _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, Action<Message> handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // handle the looping in the thread 19: private void MessageLoop() 20: { 21: while(!_isHalted) 22: { 23: // as long as processing, wait 1 second for message 24: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 25: if(msg != null) 26: { 27: _handler(msg); 28: } 29: } 30: } 31: } Here the MessageListener now takes an Action<Message>.  For those of you unfamiliar with the pre-defined delegate types in .NET, that is a method with the signature: void SomeMethodName(Message). The great thing about delegates is it gives you a lot of power. You could create an anonymous delegate, a lambda, or specify any other method as long as it satisfies the Action<Message> signature. This way, you don't need to define an arbitrary helper class or name the method a specific thing. Incidentally, we could combine both the interface and delegate approach to allow maximum flexibility. Doing this, the user could either pass in a delegate, or specify a delegate interface: 1: // using delegation - give users choice of interface or delegate 2: public sealed class MessageListener 3: { 4: private ISubscriber _subscriber; 5: private Action<Message> _handler; 6: private bool _isHalted = false; 7: private Thread _messageThread; 8:  9: // assign the subscriber and start the messaging loop 10: public MessageListener(ISubscriber subscriber, Action<Message> handler) 11: { 12: _subscriber = subscriber; 13: _handler = handler; 14: _messageThread = new Thread(MessageLoop); 15: _messageThread.Start(); 16: } 17:  18: // passes the interface method as a delegate using method group 19: public MessageListener(ISubscriber subscriber, IMessageHandler handler) 20: : this(subscriber, handler.OnMessageReceived) 21: { 22: } 23:  24: // handle the looping in the thread 25: private void MessageLoop() 26: { 27: while(!_isHalted) 28: { 29: // as long as processing, wait 1 second for message 30: Message msg = _subscriber.Receive(TimeSpan.FromSeconds(1)); 31: if(msg != null) 32: { 33: _handler(msg); 34: } 35: } 36: } 37: } } This is the method I tend to prefer because it allows the user of the class to choose which method works best for them. You may be curious about the actual performance of these different methods. 1: Enter iterations: 2: 1000000 3:  4: Inheritance took 4 ms. 5: Events took 7 ms. 6: Interface delegation took 4 ms. 7: Lambda delegate took 5 ms. Before you get too caught up in the numbers, however, keep in mind that this is performance over over 1,000,000 iterations. Since they are all < 10 ms which boils down to fractions of a micro-second per iteration so really any of them are a fine choice performance wise. As such, I think the choice of what to do really boils down to what you're trying to do. Here's my guidelines: Inheritance should be used only when defining a collection of related types with implementation specific behaviors, it should not be used as a hook for users to add their own functionality. Events should be used when subscription is optional or multi-cast is desired. Interface delegation should be used when you wish to refer to implementing classes by the interface type or if the type requires several methods to be implemented. Delegate method delegation should be used when you only need to provide one method and do not need to refer to implementers by the interface name.

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #007

  - by pinaldave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Find Stored Procedure Related to Table in Database – Search in All Stored Procedure In 2006 I wrote a small script which will help user  find all the Stored Procedures (SP) which are related to one or more specific tables. This was quite a popular script however, in SQL Server 2012 the same can be achieved using new DMV sys.sql-expression_dependencies. I recently blogged about it over Find Referenced or Referencing Object in SQL Server using sys.sql_expression_dependencies. 2007 SQL SERVER – Versions, CodeNames, Year of Release 1993 – SQL Server 4.21 for Windows NT 1995 – SQL Server 6.0, codenamed SQL95 1996 – SQL Server 6.5, codenamed Hydra 1999 – SQL Server 7.0, codenamed Sphinx 1999 – SQL Server 7.0 OLAP, codenamed Plato 2000 – SQL Server 2000 32-bit, codenamed Shiloh (version 8.0) 2003 – SQL Server 2000 64-bit, codenamed Liberty 2005 – SQL Server 2005, codenamed Yukon (version 9.0) 2008 – SQL Server 2008, codenamed Katmai (version 10.0) 2011 – SQL Server 2008, codenamed Denali (version 11.0) Search String in Stored Procedure Searching sting in the stored procedure is one of the most frequent task developer do. They might be searching for a table, view or any other details. I have written a script to do the same in SQL Server 2000 and SQL Server 2005. This is worth bookmarking blog post. There is an alternative way to do the same as well here is the example. 2008 SQL SERVER – Refresh Database Using T-SQL NO! Some of the questions have a single answer NO! You may want to read the question in the original blog post. I had a great time saying No! SQL SERVER – Delete Backup History – Cleanup Backup History SQL Server stores history of all the taken backup forever. History of all the backup is stored in the msdb database. Many times older history is no more required. Following Stored Procedure can be executed with a parameter which takes days of history to keep. In the following example 30 is passed to keep a history of month. 2009 Stored Procedure are Compiled on First Run – SP taking Longer to Run First Time Is stored procedure pre-compiled? Why the Stored Procedure takes a long time to run for the first time?  This is a very common questions often discussed by developers and DBAs. There is an absolutely definite answer but the question has been discussed forever. There is a misconception that stored procedures are pre-compiled. They are not pre-compiled, but compiled only during the first run. For every subsequent runs, it is for sure pre-compiled. Read the entire article for example and demonstration. Removing Key Lookup – Seek Predicate – Predicate – An Interesting Observation Related to Datatypes This is one of the most important performance tuning lesson on my blog. I suggest this weekend you spend time reading them and let me know what you think about the concepts which I have demonstrated in the four part series. Part 1 | Part 2 | Part 3 | Part 4 Seek Predicate is the operation that describes the b-tree portion of the Seek. Predicate is the operation that describes the additional filter using non-key columns. Based on the description, it is very clear that Seek Predicate is better than Predicate as it searches indexes whereas in Predicate, the search is on non-key columns – which implies that the search is on the data in page files itself. Policy Based Management – Create, Evaluate and Fix Policies This article will cover the most spectacular feature of SQL Server – Policy-based management and how the configuration of SQL Server with policy-based management architecture can make a powerful difference. Policy based management is loaded with several advantages. It can help you implement various policies for reliable configuration of the system. It also provides additional administration assistance to DBAs and helps them effortlessly manage various tasks of SQL Server across the enterprise. 2010 Recycle Error Log – Create New Log file without Server Restart Once I observed a DBA to restaring the SQL Server when he needed new error log file. This was funny and sad both at the same time. There is no need to restart the server to create a new log file or recycle the log file. You can run sp_cycle_errorlog and achieve the same result. Get Database Backup History for a Single Database Simple but effective script! Reducing CXPACKET Wait Stats for High Transactional Database The subject is very complex and I have done my best to simplify the concept. In simpler words, when a parallel operation is created for SQL Query, there are multiple threads for a single query. Each query deals with a different set of the data (or rows). Due to some reasons, one or more of the threads lag behind, creating the CXPACKET Wait Stat. Threads which came first have to wait for the slower thread to finish. The Wait by a specific completed thread is called CXPACKET Wait Stat. Information Related to DATETIME and DATETIME2 There are quite a lot of confusion with DATETIME and DATETIME2. DATETIME2 is also one of the underutilized datatype of SQL Server.  In this blog post I have written a follow up of the my earlier datetime series where I clarify a few of the concepts related to datetime. Difference Between GETDATE and SYSDATETIME Difference Between DATETIME and DATETIME2 – WITH GETDATE Difference Between DATETIME and DATETIME2 2011 Introduction to CUME_DIST – Analytic Functions Introduced in SQL Server 2012 SQL Server 2012 introduces new analytical function CUME_DIST(). This function provides cumulative distribution value. It will be very difficult to explain this in words so I will attempt small example to explain you this function. Instead of creating new table, I will be using AdventureWorks sample database as most of the developer uses that for experiment. Introduction to FIRST _VALUE and LAST_VALUE – Analytic Functions Introduced in SQL Server 2012 SQL Server 2012 introduces new analytical functions FIRST_VALUE() and LAST_VALUE(). This function returns first and last value from the list. It will be very difficult to explain this in words so I’d like to attempt to explain its function through a brief example. Instead of creating a new table, I will be using the AdventureWorks sample database as most developers use that for experiment purposes. OVER clause with FIRST _VALUE and LAST_VALUE – Analytic Functions Introduced in SQL Server 2012 – ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING “Don’t you think there is bug in your first example where FIRST_VALUE is remain same but the LAST_VALUE is changing every line. I think the LAST_VALUE should be the highest value in the windows or set of result.” Puzzle – Functions FIRST_VALUE and LAST_VALUE with OVER clause and ORDER BY You can see that row number 2, 3, 4, and 5 has same SalesOrderID = 43667. The FIRST_VALUE is 78 and LAST_VALUE is 77. Now if these function was working on maximum and minimum value they should have given answer as 77 and 80 respectively instead of 78 and 77. Also the value of FIRST_VALUE is greater than LAST_VALUE 77. Why? Explain in detail. Introduction to LEAD and LAG – Analytic Functions Introduced in SQL Server 2012 SQL Server 2012 introduces new analytical function LEAD() and LAG(). This functions accesses data from a subsequent row (for lead) and previous row (for lag) in the same result set without the use of a self-join . It will be very difficult to explain this in words so I will attempt small example to explain you this function. Instead of creating new table, I will be using AdventureWorks sample database as most of the developer uses that for experiment. A Real Story of Book Getting ‘Out of Stock’ to A 25% Discount Story Available Our book was out of stock in 48 hours of it was arrived in stock! We got call from the online store with a request for more copies within 12 hours. But we had printed only as many as we had sent them. There were no extra copies. We finally talked to the printer to get more copies. However, due to festivals and holidays the copies could not be shipped to the online retailer for two days. We knew for sure that they were going to be out of the book for 48 hours. This is the story of how we overcame that situation! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Minimum-Waste Print Job Grouping Algorithm?

  - by Matt Mc

  I work at a publishing house and I am setting up one of our presses for "ganging", in other words, printing multiple jobs simultaneously. Given that different print jobs can have different quantities, and anywhere from 1 to 20 jobs might need to be considered at a time, the problem would be to determine which jobs to group together to minimize waste (waste coming from over-printing on smaller-quantity jobs in a given set, that is). Given the following stable data: All jobs are equal in terms of spatial size--placement on paper doesn't come into consideration. There are three "lanes", meaning that three jobs can be printed simultaneously. Ideally, each lane has one job. Part of the problem is minimizing how many lanes each job is run on. If necessary, one job could be run on two lanes, with a second job on the third lane. The "grouping" waste from a given set of jobs (let's say the quantities of them are x, y and z) would be the highest number minus the two lower numbers. So if x is the higher number, the grouping waste would be (x - y) + (x - z). Otherwise stated, waste is produced by printing job Y and Z (in excess of their quantities) up to the quantity of X. The grouping waste would be a qualifier for the given set, meaning it could not exceed a certain quantity or the job would simply be printed alone. So the question is stated: how to determine which sets of jobs are grouped together, out of any given number of jobs, based on the qualifiers of 1) Three similar quantities OR 2) Two quantities where one is approximately double the other, AND with the aim of minimal total grouping waste across the various sets. (Edit) Quantity Information: Typical job quantities can be from 150 to 350 on foreign languages, or 500 to 1000 on English print runs. This data can be used to set up some scenarios for an algorithm. For example, let's say you had 5 jobs: 1000, 500, 500, 450, 250 By looking at it, I can see a couple of answers. Obviously (1000/500/500) is not efficient as you'll have a grouping waste of 1000. (500/500/450) is better as you'll have a waste of 50, but then you run (1000) and (250) alone. But you could also run (1000/500) with 1000 on two lanes, (500/250) with 500 on two lanes and then (450) alone. In terms of trade-offs for lane minimization vs. wastage, we could say that any grouping waste over 200 is excessive. (End Edit) ...Needless to say, quite a problem. (For me.) I am a moderately skilled programmer but I do not have much familiarity with algorithms and I am not fully studied in the mathematics of the area. I'm I/P writing a sort of brute-force program that simply tries all options, neglecting any option tree that seems to have excessive grouping waste. However, I can't help but hope there's an easier and more efficient method. I've looked at various websites trying to find out more about algorithms in general and have been slogging my way through the symbology, but it's slow going. Unfortunately, Wikipedia's articles on the subject are very cross-dependent and it's difficult to find an "in". The only thing I've been able to really find would seem to be a definition of the rough type of algorithm I need: "Exclusive Distance Clustering", one-dimensionally speaking. I did look at what seems to be the popularly referred-to algorithm on this site, the Bin Packing one, but I was unable to see exactly how it would work with my problem. Any help is appreciated. :)

  Read the article

• Story of success: MySQL Enterprise Backup (MEB) was successfully integrated with IBM Tivoli Storage Manager (TSM) via System Backup to Tape (SBT) interface.

  - by user13334359

  Since version 3.6 MEB supports backups to tape through the SBT interface.The officially supported tool for such backups to tape is Oracle Secure Backup (OSB).But there are a lot of other Storage Managers. MEB allows to use them through the SBT interface. Since version 3.7 it also has option --sbt-environment which allows to pass environment variables, not needed by OSB, to third-party managers. At the same time MEB can not guarantee it would work with all of them.This month we were contacted by a customer who wanted to use IBM Tivoli Storage Manager (TSM) with MEB. We could only say them same thing I wrote in previous paragraph: this solution is supposed to work, but you have to be pioneers of this technology. And they agreed. They agreed to be the pioneers and so the story begins.MEB requires following options to be specified by those who want to connect it to SBT interface:--sbt-database-name: a name which should be handed over to SBT interface. This can be any name. Default, MySQL, works for most cases, so user is not required to specify this option.--sbt-lib-path: path to SBT library. For TSM this library comes with "Data Protection for Oracle", which, in its turn, interfaces with Oracle Recovery Manager (RMAN), which uses SBT interface. So you need to install it even if you don't use Oracle.--sbt-environment: environment for third-party manager. This option is not needed when you use OSB, but almost always necessary for third-party SBT managers. TSM requires variable TDPO_OPTFILE to be set and point to the TSM configuration file.--backup-image=sbt:: path to the image. Prefix "sbt:" indicates that image should be sent through SBT interfaceSo full command in our case would look like: ./mysqlbackup --port=3307 --protocol=tcp --user=backup_user --password=foobar \ --backup-image=sbt:my-first-backup --sbt-lib-path=/usr/lib/libobk.so \ --sbt-environment="TDPO_OPTFILE=/path/to/my/tdpo.opt" --backup-dir=/path/to/my/dir backup-to-imageAnd this command results in the following output log: MySQL Enterprise Backup version 3.7.1 [2012/02/16] Copyright (c) 2003, 2012, Oracle and/or its affiliates. All Rights Reserved. INFO: Starting with following command line ...  ./mysqlbackup --port=3307 --protocol=tcp --user=backup_user         --password=foobar --backup-image=sbt:my-first-backup         --sbt-lib-path=/usr/lib/libobk.so         --sbt-environment="TDPO_OPTFILE=/path/to/my/tdpo.opt"         --backup-dir=/path/to/my/dir backup-to-image sbt-environment: 'TDPO_OPTFILE=/path/to/my/tdpo.opt' INFO: Got some server configuration information from running server. IMPORTANT: Please check that mysqlbackup run completes successfully.             At the end of a successful 'backup-to-image' run mysqlbackup             prints "mysqlbackup completed OK!". --------------------------------------------------------------------                        Server Repository Options: --------------------------------------------------------------------   datadir                          =  /path/to/data   innodb_data_home_dir             =  /path/to/data   innodb_data_file_path            =  ibdata1:2048M;ibdata2:2048M;ibdata3:64M:autoextend:max:2048M   innodb_log_group_home_dir        =  /path/to/data   innodb_log_files_in_group        =  2   innodb_log_file_size             =  268435456 --------------------------------------------------------------------                        Backup Config Options: --------------------------------------------------------------------   datadir                          =  /path/to/my/dir/datadir   innodb_data_home_dir             =  /path/to/my/dir/datadir   innodb_data_file_path            =  ibdata1:2048M;ibdata2:2048M;ibdata3:64M:autoextend:max:2048M   innodb_log_group_home_dir        =  /path/to/my/dir/datadir   innodb_log_files_in_group        =  2   innodb_log_file_size             =  268435456 Backup Image Path= sbt:my-first-backup mysqlbackup: INFO: Unique generated backup id for this is 13297406400663200 120220 08:54:00 mysqlbackup: INFO: meb_sbt_session_open: MMS is 'Data Protection for Oracle: version 5.5.1.0' 120220 08:54:00 mysqlbackup: INFO: meb_sbt_session_open: MMS version '5.5.1.0' mysqlbackup: INFO: Uses posix_fadvise() for performance optimization. mysqlbackup: INFO: System tablespace file format is Antelope. mysqlbackup: INFO: Found checkpoint at lsn 31668381. mysqlbackup: INFO: Starting log scan from lsn 31668224. 120220  8:54:00 mysqlbackup: INFO: Copying log... 120220  8:54:00 mysqlbackup: INFO: Log copied, lsn 31668381.           We wait 1 second before starting copying the data files... 120220  8:54:01 mysqlbackup: INFO: Copying /path/to/ibdata/ibdata1 (Antelope file format). mysqlbackup: Progress in MB: 200 400 600 800 1000 1200 1400 1600 1800 2000 120220  8:55:30 mysqlbackup: INFO: Copying /path/to/ibdata/ibdata2 (Antelope file format). mysqlbackup: Progress in MB: 200 400 600 800 1000 1200 1400 1600 1800 2000 120220  8:57:18 mysqlbackup: INFO: Copying /path/to/ibdata/ibdata3 (Antelope file format). mysqlbackup: INFO: Preparing to lock tables: Connected to mysqld server. 120220 08:57:22 mysqlbackup: INFO: Starting to lock all the tables.... 120220 08:57:22 mysqlbackup: INFO: All tables are locked and flushed to disk mysqlbackup: INFO: Opening backup source directory '/path/to/data/' 120220 08:57:22 mysqlbackup: INFO: Starting to backup all files in subdirectories of '/path/to/data/' mysqlbackup: INFO: Backing up the database directory 'mysql' mysqlbackup: INFO: Backing up the database directory 'test' mysqlbackup: INFO: Copying innodb data and logs during final stage ... mysqlbackup: INFO: A copied database page was modified at 31668381.           (This is the highest lsn found on page)           Scanned log up to lsn 31670396.           Was able to parse the log up to lsn 31670396.           Maximum page number for a log record 328 120220 08:57:23 mysqlbackup: INFO: All tables unlocked mysqlbackup: INFO: All MySQL tables were locked for 0.000 seconds 120220 08:59:01 mysqlbackup: INFO: meb_sbt_backup_close: blocks: 4162  size: 1048576  bytes: 4363985063 120220  8:59:01 mysqlbackup: INFO: Full backup completed! mysqlbackup: INFO: MySQL binlog position: filename bin_mysql.001453, position 2105 mysqlbackup: WARNING: backup-image already closed mysqlbackup: INFO: Backup image created successfully.:            Image Path: 'sbt:my-first-backup' -------------------------------------------------------------    Parameters Summary -------------------------------------------------------------    Start LSN                  : 31668224    End LSN                    : 31670396 ------------------------------------------------------------- mysqlbackup completed OK!Backup successfully completed.To restore it you should use same commands like you do for any other MEB image, but need to provide sbt* options as well: $./mysqlbackup --backup-image=sbt:my-first-backup --sbt-lib-path=/usr/lib/libobk.so \ --sbt-environment="TDPO_OPTFILE=/path/to/my/tdpo.opt" --backup-dir=/path/to/my/dir image-to-backup-dirThen apply log as usual: $./mysqlbackup --backup-dir=/path/to/my/dir apply-logThen stop mysqld and finally copy-back: $./mysqlbackup --defaults-file=path/to/my.cnf --backup-dir=/path/to/my/dir copy-back  Disclaimer. This is only story of one success which can be useful for someone else. MEB is not regularly tested and not guaranteed to work with IBM TSM or any other third-party storage manager.

  Read the article

• Double Linked List Insertion Sorting Bug

  - by house

  Hello, I have implemented an insertion sort in a double link list (highest to lowest) from a file of 10,000 ints, and output to file in reverse order. To my knowledge I have implemented such a program, however I noticed in the ouput file, a single number is out of place. Every other number is in correct order. The number out of place is a repeated number, but the other repeats of this number are in correct order. Its just strange how this number is incorrectly placed. Also the unsorted number is only 6 places out of sync. I have looked through my program for days now with no idea where the problem lies, so I turn to you for help. Below is the code in question, (side note: can my question be deleted by myself? rather my colleges dont thieve my code, if not how can it be deleted?) void DLLIntStorage::insertBefore(int inValue, node *nodeB) { node *newNode; newNode = new node(); newNode->prev = nodeB->prev; newNode->next = nodeB; newNode->value = inValue; if(nodeB->prev==NULL) { this->front = newNode; } else { nodeB->prev->next = newNode; } nodeB->prev = newNode; } void DLLIntStorage::insertAfter(int inValue, node *nodeB) { node *newNode; newNode = new node(); newNode->next = nodeB->next; newNode->prev = nodeB; newNode->value = inValue; if(nodeB->next == NULL) { this->back = newNode; } else { nodeB->next->prev = newNode; } nodeB->next = newNode; } void DLLIntStorage::insertFront(int inValue) { node *newNode; if(this->front == NULL) { newNode = new node(); this->front = newNode; this->back = newNode; newNode->prev = NULL; newNode->next = NULL; newNode->value = inValue; } else { insertBefore(inValue, this->front); } } void DLLIntStorage::insertBack(int inValue) { if(this->back == NULL) { insertFront(inValue); } else { insertAfter(inValue, this->back); } } ifstream& operator>> (ifstream &in, DLLIntStorage &obj) { int readInt, counter = 0; while(!in.eof()) { if(counter==dataLength) //stops at 10,000 { break; } in >> readInt; if(obj.front != NULL ) { obj.insertion(readInt); } else { obj.insertBack(readInt); } counter++; } return in; } void DLLIntStorage::insertion(int inValue) { node* temp; temp = this->front; if(temp->value >= inValue) { insertFront(inValue); return; } else { while(temp->next!=NULL && temp!=this->back) { if(temp->value >= inValue) { insertBefore(inValue, temp); return; } temp = temp->next; } } if(temp == this->back) { insertBack(inValue); } } Thankyou for your time.

  Read the article

• Log Blog

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Logging – A log blog In a another blog (Missing Fields and Defaults) I spoke about not doing a blog about log files, but then I looked at it again and realized that this is a nice opportunity to show a simple yet powerful tool and also deal with static variables and functions in C#. My log had to be able to answer a few simple logging rules:   To log or not to log? That is the question – Always log! That is the answer  Do we share a log? Even when a file is opened with a minimal lock, it does not share well and performance greatly suffers. So sharing a log is not a good idea. Also, when sharing, it is harder to find your particular entries and you have to establish rules about retention. My recommendation – Do Not Share!  How verbose? Your log can be very verbose – a good thing when testing, very terse – a good thing in day-to-day runs, or somewhere in between. You must be the judge. In my Blog, I elect to always report a run with start and end times, and always report errors. I normally use 5 levels of logging: 4 – write all, 3 – write more, 2 – write some, 1 – write errors and timing, 0 – write none. The code sample below is more general than that. It uses the config file to set the max log level and each call to the log assigns a level to the call itself. If the level is above the .config highest level, the line will not be written. Programmers decide which log belongs to which level and thus we can set the .config differently for production and testing.  Where do I keep the log? If your career is important to you, discuss this with the boss and with the system admin. We keep logs in the L: drive of our server and make sure that we have a directory for each app that needs a log. When adding a new app, add a new directory. The default location for the log is also found in the .config file Print One or Many? There are two options here:   1.     Print many, Open but once once – you start the stream and close it only when the program ends. This is what you can do when you perform in “batch” mode like in a console app or a stsadm extension.The advantage to this is that starting a closing a stream is expensive and time consuming and because we use a unique file, keeping it open for a long time does not cause contention problems. 2.     Print one entry at a time or Open many – every time you write a line, you start the stream, write to it and close it. This work for event receivers, feature receivers, and web parts. Here scalability requires us to create objects on the fly and get rid of them as soon as possible.  A default value of the onceOrMany resides in the .config.  All of the above applies to any windows or web application, not just SharePoint.  So as usual, here is a routine that does it all, and a few simple functions that call it for a variety of purposes.   So without further ado, here is app.config  <?xml version="1.0" encoding="utf-8" ?> <configuration>     <configSections>         <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, ublicKeyToken=b77a5c561934e089" >         <section name="statics.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />         </sectionGroup>     </configSections>     <applicationSettings>         <statics.Properties.Settings>             <setting name="oneOrMany" serializeAs="String">                 <value>False</value>             </setting>             <setting name="logURI" serializeAs="String">                 <value>C:\staticLog.txt</value>             </setting>             <setting name="highestLevel" serializeAs="String">                 <value>2</value>             </setting>         </statics.Properties.Settings>     </applicationSettings> </configuration>   And now the code:  In order to persist the variables between calls and also to be able to persist (or not to persist) the log file itself, I created an EventLog class with static variables and functions. Static functions do not need an instance of the class in order to work. If you ever wondered why our Main function is static, the answer is that something needs to run before instantiation so that other objects may be instantiated, and this is what the “static” Main does. The various logging functions and variables are created as static because they do not need instantiation and as a fringe benefit they remain un-destroyed between calls. The Main function here is just used for testing. Note that it does not instantiate anything, just uses the log functions. This is possible because the functions are static. Also note that the function calls are of the form: Class.Function.  using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.IO; namespace statics {       class Program     {         static void Main(string[] args)         {             //write a single line             EventLog.LogEvents("ha ha", 3, "C:\\hahafile.txt", 4, true, false);             //this single line will not be written because the msgLevel is too high             EventLog.LogEvents("baba", 3, "C:\\babafile.txt", 2, true, false);             //The next 4 lines will be written in succession - no closing             EventLog.LogLine("blah blah", 1);             EventLog.LogLine("da da", 1);             EventLog.LogLine("ma ma", 1);             EventLog.LogLine("lah lah", 1);             EventLog.CloseLog(); // log will close             //now with specific functions             EventLog.LogSingleLine("one line", 1);             //this is just a test, the log is already closed             EventLog.CloseLog();         }     }     public class EventLog     {         public static string logURI = Properties.Settings.Default.logURI;         public static bool isOneLine = Properties.Settings.Default.oneOrMany;         public static bool isOpen = false;         public static int highestLevel = Properties.Settings.Default.highestLevel;         public static StreamWriter sw;         /// <summary>         /// the program will "print" the msg into the log         /// unless msgLevel is > msgLimit         /// onceOrMany is true when once - the program will open the log         /// print the msg and close the log. False when many the program will         /// keep the log open until close = true         /// normally all the arguments will come from the app.config         /// called by many overloads of logLine         /// </summary>         /// <param name="msg"></param>         /// <param name="msgLevel"></param>         /// <param name="logFileName"></param>         /// <param name="msgLimit"></param>         /// <param name="onceOrMany"></param>         /// <param name="close"></param>         public static void LogEvents(string msg, int msgLevel, string logFileName, int msgLimit, bool oneOrMany, bool close)         {             //to print or not to print             if (msgLevel <= msgLimit)             {                 //open the file. from the argument (logFileName) or from the config (logURI)                 if (!isOpen)                 {                     string logFile = logFileName;                     if (logFileName == "")                     {                         logFile = logURI;                     }                     sw = new StreamWriter(logFile, true);                     sw.WriteLine("Started At: " + DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss"));                     isOpen = true;                 }                 //print                 sw.WriteLine(msg);             }             //close when instructed             if (close || oneOrMany)             {                 if (isOpen)                 {                     sw.WriteLine("Ended At: " + DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss"));                     sw.Close();                     isOpen = false;                 }             }         }           /// <summary>         /// The simplest, just msg and level         /// </summary>         /// <param name="msg"></param>         /// <param name="msgLevel"></param>         public static void LogLine(string msg, int msgLevel)         {             //use the given msg and msgLevel and all others are defaults             LogEvents(msg, msgLevel, "", highestLevel, isOneLine, false);         }                 /// <summary>         /// one line at a time - open print close         /// </summary>         /// <param name="msg"></param>         /// <param name="msgLevel"></param>         public static void LogSingleLine(string msg, int msgLevel)         {             LogEvents(msg, msgLevel, "", highestLevel, true, true);         }           /// <summary>         /// used to close. high level, low limit, once and close are set         /// </summary>         /// <param name="close"></param>         public static void CloseLog()         {             LogEvents("", 15, "", 1, true, true);         }           }     }   }   That’s all folks!

  Read the article

• Why isn't my algorithm for find the biggest and smallest inputs working?

  - by Matt Ellen

  I have started a new job, and with it comes a new language: Ironpython. Thankfully a good language :D Before starting I got to grips with Python on the whole, but that was only a week's worth of learning. Now I'm writing actual code. I've been charged with writing an algorithm that finds the best input parameter to collect data with. The basic algorithm is (as I've been instructed): Set the input parameter to a good guess Start collecting data When data is available stop collecting find the highest point If the point before this (i.e. for the previous parameter value) was higher and the point before that was lower then we've found the max otherwise the input parameter is increased by the initial guess. goto 2 If the max is found then the min needs to be found. To do this the algorithm carries on increasing the input, but by 1/10 of the max, until the current point is greater than the previous point and the point before that is also greater. Once the min is found then the algorithm stops. Currently I have a simplified data generator outputting the sin of the input, so that I know that the min value should be PI and the max value should be PI/2 The main Python code looks like this (don't worry, this is just for my edification, I don't write real code like this): import sys sys.path.append(r"F:\Programming Source\C#\PythonHelp\PythonHelp\bin\Debug") import clr clr.AddReferenceToFile("PythonHelpClasses.dll") import PythonHelpClasses from PHCStruct import Helper from System import Math helper = Helper() def run(): b = PythonHelpClasses.Executor() a = PythonHelpClasses.HasAnEvent() b.Input = 0.0 helper.__init__() def AnEventHandler(e): b.Stop() h = helper h.lastLastVal, h.lastVal, h.currentVal = h.lastVal, h.currentVal, e.Number if h.lastLastVal < h.lastVal and h.currentVal < h.lastVal and h.NotPast90: h.NotPast90 = False h.bestInput = h.lastInput inputInc = 0.0 if h.NotPast90: inputInc = Math.PI/10.0 else: inputInc = h.bestInput/10.0 if h.lastLastVal > h.lastVal and h.currentVal > h.lastVal and h.NotPast180: h.NotPast180 = False if h.NotPast180: h.lastInput, b.Input = b.Input, b.Input + inputInc b.Start(a) else: print "Best input:", h.bestInput print "Last input:", h.lastInput b.Stop() a.AnEvent += AnEventHandler b.Start(a) PHCStruct.py: class Helper(): def __init__(self): self.currentVal = 0 self.lastVal = 0 self.lastLastVal = 0 self.NotPast90 = True self.NotPast180 = True self.bestInput = 0 self.lastInput = 0 PythonHelpClasses has two small classes I wrote in C# before I realised how to do it in Ironpython. Executor runs a delegate asynchronously while it's running member is true. The important code: public void Start(HasAnEvent hae) { running = true; RunDelegate r = new RunDelegate(hae.UpdateNumber); AsyncCallback ac = new AsyncCallback(UpdateDone); IAsyncResult ar = r.BeginInvoke(Input, ac, null); } public void Stop() { running = false; } public void UpdateDone(IAsyncResult ar) { RunDelegate r = (RunDelegate)((AsyncResult)ar).AsyncDelegate; r.EndInvoke(ar); if (running) { AsyncCallback ac = new AsyncCallback(UpdateDone); IAsyncResult ar2 = r.BeginInvoke(Input, ac, null); } } HasAnEvent has a function that generates the sin of its input and fires an event with that result as its argument. i.e.: public void UpdateNumber(double val) { AnEventArgs e = new AnEventArgs(Math.Sin(val)); System.Threading.Thread.Sleep(1000); if (null != AnEvent) { AnEvent(e); } } The sleep is in there just to slow things down a bit. The problem I am getting is that the algorithm is not coming up with the best input being PI/2 and the final input being PI, but I can't see why. Also the best and final inputs are different each time I run the programme. Can anyone see why? Also when the algorithm terminates the best and final inputs are printed to the screen multiple times, not just once. Can someone explain why?

  Read the article

• Play Video File in Asp. Net 3.5 in IIS

  - by Sneha Joshi

  I have developed an application to upload a video on the server and then play it. It runs well when i execute it in Visual Studio 2008 in-built web server.. But when I configure it on IIS, the video does not play... Is there any settings needed in IIS to play video ?? The code of Button Click event - **protected void btnPlayVideo_Click(object sender, EventArgs e) { try { string himaSagarURL = this.lnkbtnVideo.Text; bool isFullSize = false; this.Literal1.Text = this.Play_Video(himaSagarURL, isFullSize); } catch (Exception ex) { this.Response.Write(ex.ToString()); } } This button click event calls the Play_Video method which is given below.. The code I used for embedding - private string Play_Video(string sagarURL, bool isFullSize) { string himaSagarObject = ""; sagarURL = sagarURL + ""; sagarURL = sagarURL.Trim(); if (sagarURL.Length > 0) { //Continue. } else { throw new System.ArgumentNullException("sagarURL"); } string himaSagarWidthAndHeight = ""; if (isFullSize) { himaSagarWidthAndHeight = ""; } else { himaSagarWidthAndHeight = "width='640' height='480'"; } himaSagarObject = himaSagarObject + "<object classid='CLSID:22D6F312-B0F6-11D0-94AB-0080C74C7E95' id='player' " + himaSagarWidthAndHeight + " standby='Please wait while the object is loaded...'>"; himaSagarObject = himaSagarObject + "<param name='url' value='" + sagarURL + "' />"; himaSagarObject = himaSagarObject + "<param name='src' value='" + sagarURL + "' />"; himaSagarObject = himaSagarObject + "<param name='AutoStart' value='true' />"; himaSagarObject = himaSagarObject + "<param name='Balance' value='0' />"; //-100 is fully left, 100 is fully right. himaSagarObject = himaSagarObject + "<param name='CurrentPosition' value='0' />"; //Position in seconds when starting. himaSagarObject = himaSagarObject + "<param name='showcontrols' value='true' />"; //Show play/stop/pause controls. himaSagarObject = himaSagarObject + "<param name='enablecontextmenu' value='true' />"; //Allow right-click. himaSagarObject = himaSagarObject + "<param name='fullscreen' value='" + isFullSize.ToString() + "' />"; //Start in full screen or not. himaSagarObject = himaSagarObject + "<param name='mute' value='false' />"; himaSagarObject = himaSagarObject + "<param name='PlayCount' value='1' />"; //Number of times the content will play. himaSagarObject = himaSagarObject + "<param name='rate' value='1.0' />"; //0.5=Slow, 1.0=Normal, 2.0=Fast himaSagarObject = himaSagarObject + "<param name='uimode' value='full' />"; // full, mini, custom, none, invisible himaSagarObject = himaSagarObject + "<param name='showdisplay' value='true' />"; //Show or hide the name of the file. himaSagarObject = himaSagarObject + "<param name='volume' value='50' />"; // 0=lowest, 100=highest himaSagarObject = himaSagarObject + "</object>"; return himaSagarObject; }**

  Read the article

• Working with Timelines with LINQ to Twitter

  - by Joe Mayo

  When first working with the Twitter API, I thought that using SinceID would be an effective way to page through timelines. In practice it doesn’t work well for various reasons. To explain why, Twitter published an excellent document that is a must-read for anyone working with timelines: Twitter Documentation: Working with Timelines This post shows how to implement the recommended strategies in that document by using LINQ to Twitter. You should read the document in it’s entirety before moving on because my explanation will start at the bottom and work back up to the top in relation to the Twitter document. What follows is an explanation of SinceID, MaxID, and how they come together to help you efficiently work with Twitter timelines. The Role of SinceID Specifying SinceID says to Twitter, “Don’t return tweets earlier than this”. What you want to do is store this value after every timeline query set so that it can be reused on the next set of queries.  The next section will explain what I mean by query set, but a quick explanation is that it’s a loop that gets all new tweets. The SinceID is a backstop to avoid retrieving tweets that you already have. Here’s some initialization code that includes a variable named sinceID that will be used to populate the SinceID property in subsequent queries: // last tweet processed on previous query set ulong sinceID = 210024053698867204; ulong maxID; const int Count = 10; var statusList = new List<status>(); Here, I’ve hard-coded the sinceID variable, but this is where you would initialize sinceID from whatever storage you choose (i.e. a database). The first time you ever run this code, you won’t have a value from a previous query set. Initially setting it to 0 might sound like a good idea, but what if you’re querying a timeline with lots of tweets? Because of the number of tweets and rate limits, your query set might take a very long time to run. A caveat might be that Twitter won’t return an entire timeline back to Tweet #0, but rather only go back a certain period of time, the limits of which are documented for individual Twitter timeline API resources. So, to initialize SinceID at too low of a number can result in a lot of initial tweets, yet there is a limit to how far you can go back. What you’re trying to accomplish in your application should guide you in how to initially set SinceID. I have more to say about SinceID later in this post. The other variables initialized above include the declaration for MaxID, Count, and statusList. The statusList variable is a holder for all the timeline tweets collected during this query set. You can set Count to any value you want as the largest number of tweets to retrieve, as defined by individual Twitter timeline API resources. To effectively page results, you’ll use the maxID variable to set the MaxID property in queries, which I’ll discuss next. Initializing MaxID On your first query of a query set, MaxID will be whatever the most recent tweet is that you get back. Further, you don’t know what MaxID is until after the initial query. The technique used in this post is to do an initial query and then use the results to figure out what the next MaxID will be.  Here’s the code for the initial query: var userStatusResponse = (from tweet in twitterCtx.Status where tweet.Type == StatusType.User && tweet.ScreenName == "JoeMayo" && tweet.SinceID == sinceID && tweet.Count == Count select tweet) .ToList(); statusList.AddRange(userStatusResponse); // first tweet processed on current query maxID = userStatusResponse.Min( status => ulong.Parse(status.StatusID)) - 1; The query above sets both SinceID and Count properties. As explained earlier, Count is the largest number of tweets to return, but the number can be less. A couple reasons why the number of tweets that are returned could be less than Count include the fact that the user, specified by ScreenName, might not have tweeted Count times yet or might not have tweeted at least Count times within the maximum number of tweets that can be returned by the Twitter timeline API resource. Another reason could be because there aren’t Count tweets between now and the tweet ID specified by sinceID. Setting SinceID constrains the results to only those tweets that occurred after the specified Tweet ID, assigned via the sinceID variable in the query above. The statusList is an accumulator of all tweets receive during this query set. To simplify the code, I left out some logic to check whether there were no tweets returned. If  the query above doesn’t return any tweets, you’ll receive an exception when trying to perform operations on an empty list. Yeah, I cheated again. Besides querying initial tweets, what’s important about this code is the final line that sets maxID. It retrieves the lowest numbered status ID in the results. Since the lowest numbered status ID is for a tweet we already have, the code decrements the result by one to keep from asking for that tweet again. Remember, SinceID is not inclusive, but MaxID is. The maxID variable is now set to the highest possible tweet ID that can be returned in the next query. The next section explains how to use MaxID to help get the remaining tweets in the query set. Retrieving Remaining Tweets Earlier in this post, I defined a term that I called a query set. Essentially, this is a group of requests to Twitter that you perform to get all new tweets. A single query might not be enough to get all new tweets, so you’ll have to start at the top of the list that Twitter returns and keep making requests until you have all new tweets. The previous section showed the first query of the query set. The code below is a loop that completes the query set: do { // now add sinceID and maxID userStatusResponse = (from tweet in twitterCtx.Status where tweet.Type == StatusType.User && tweet.ScreenName == "JoeMayo" && tweet.Count == Count && tweet.SinceID == sinceID && tweet.MaxID == maxID select tweet) .ToList(); if (userStatusResponse.Count > 0) { // first tweet processed on current query maxID = userStatusResponse.Min( status => ulong.Parse(status.StatusID)) - 1; statusList.AddRange(userStatusResponse); } } while (userStatusResponse.Count != 0 && statusList.Count < 30); Here we have another query, but this time it includes the MaxID property. The SinceID property prevents reading tweets that we’ve already read and Count specifies the largest number of tweets to return. Earlier, I mentioned how it was important to check how many tweets were returned because failing to do so will result in an exception when subsequent code runs on an empty list. The code above protects against this problem by only working with the results if Twitter actually returns tweets. Reasons why there wouldn’t be results include: if the first query got all the new tweets there wouldn’t be more to get and there might not have been any new tweets between the SinceID and MaxID settings of the most recent query. The code for loading the returned tweets into statusList and getting the maxID are the same as previously explained. The important point here is that MaxID is being reset, not SinceID. As explained in the Twitter documentation, paging occurs from the newest tweets to oldest, so setting MaxID lets us move from the most recent tweets down to the oldest as specified by SinceID. The two loop conditions cause the loop to continue as long as tweets are being read or a max number of tweets have been read.  Logically, you want to stop reading when you’ve read all the tweets and that’s indicated by the fact that the most recent query did not return results. I put the check to stop after 30 tweets are reached to keep the demo from running too long – in the console the response scrolls past available buffer and I wanted you to be able to see the complete output. Yet, there’s another point to be made about constraining the number of items you return at one time. The Twitter API has rate limits and making too many queries per minute will result in an error from twitter that LINQ to Twitter raises as an exception. To use the API properly, you’ll have to ensure you don’t exceed this threshold. Looking at the statusList.Count as done above is rather primitive, but you can implement your own logic to properly manage your rate limit. Yeah, I cheated again. Summary Now you know how to use LINQ to Twitter to work with Twitter timelines. After reading this post, you have a better idea of the role of SinceID - the oldest tweet already received. You also know that MaxID is the largest tweet ID to retrieve in a query. Together, these settings allow you to page through results via one or more queries. You also understand what factors affect the number of tweets returned and considerations for potential error handling logic. The full example of the code for this post is included in the downloadable source code for LINQ to Twitter.   @JoeMayo

  Read the article

• Introducing Oracle Multitenant

  - by OracleMultitenant

  0 0 1 1142 6510 Oracle Corporation 54 15 7637 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-language:JA;} The First Database Designed for the Cloud Today Oracle announced the general availability (GA) of Oracle Database 12c, the first database designed for the Cloud. Oracle Multitenant, new with Oracle Database 12c, is a key component of this – a new architecture for consolidating databases and simplifying operations in the Cloud. With this, the inaugural post in the Multitenant blog, my goal is to start the conversation about Oracle Multitenant. We are very proud of this new architecture, which we view as a major advance for Oracle. Customers, partners and analysts who have had previews are very excited about its capabilities and its flexibility. This high level review of Oracle Multitenant will touch on our design considerations and how we re-architected our database for the cloud. I’ll briefly describe our new multitenant architecture and explain it’s key benefits. Finally I’ll mention some of the major use cases we see for Oracle Multitenant. Industry Trends We always start by talking to our customers about the pressures and challenges they’re facing and what trends they’re seeing in the industry. Some things don’t change. They face the same pressures and the same requirements as ever: Pressure to do more with less; be faster, leaner, cheaper, and deliver services 24/7. Big companies have achieved scale. Now they want to realize economies of scale. As ever, DBAs are faced with the challenges of patching and upgrading large numbers of databases, and provisioning new ones.  Requirements are familiar: Performance, scalability, reliability and high availability are non-negotiable. They need ever more security in this threatening climate. There’s no time to stop and retool with new applications. What’s new are the trends. These are the techniques to use to respond to these pressures within the constraints of the requirements. With the advent of cloud computing and availability of massively powerful servers – even engineered systems such as Exadata – our customers want to consolidate many applications into fewer larger servers. There’s a move to standardized services – even self-service. Consolidation Consolidation is not new; companies have tried various different approaches to consolidation of databases in the cloud. One approach is to partition a powerful server between several virtual machines, one per application. A downside of this is that you have the resource and management overheads of OS and RDBMS per VM – that is, per application. Another is that you have replaced physical sprawl with virtual sprawl and virtual sprawl is still expensive to manage. In the dedicated database model, we have a single physical server supporting multiple databases, one per application. So there’s a shared OS overhead, but RDBMS process and memory overhead are replicated per application. Let's think about our traditional Oracle Database architecture. Every time we create a database, be it a production database, a development or a test database, what do we do? We create a set of files, we allocate a bunch of memory for managing the data, and we kick off a series of background processes. This is replicated for every one of the databases that we create. As more and more databases are fired up, these replicated overheads quickly consume the available server resources and this limits the number of applications we can run on any given server. In Oracle Database 11g and earlier the highest degree of consolidation could be achieved by what we call schema consolidation. In this model we have one big server with one big database. Individual applications are installed in separate schemas or table-owners. Database overheads are shared between all applications, which affords maximum consolidation. The shortcomings are that application changes are often required. There is no tenant isolation. One bad apple can spoil the whole batch. New Architecture & Benefits In Oracle Database 12c, we have a new multitenant architecture, featuring pluggable databases. This delivers all the resource utilization advantages of schema consolidation with none of the downsides. There are two parts to the term “pluggable database”: "pluggable", which is new, and "database", which is familiar.  Before we get to the exciting new stuff let’s discuss what hasn’t changed. A pluggable database is a fully functional Oracle database. It’s not watered down in any way. From the perspective of an application or an end user it hasn’t changed at all. This is very important because it means that no application changes are required to adopt this new architecture. There are many thousands of applications built on Oracle databases and they are all ready to run on Oracle Multitenant. So we have these self-contained pluggable databases (PDBs), and as their name suggests, they are plugged into a multitenant container database (CDB). The CDB behaves as a single database from the operations point of view. Very much as we had with the schema consolidation model, we only have a single set of Oracle background processes and a single, shared database memory requirement. This gives us very high consolidation density, which affords maximum reduction in capital expenses (CapEx). By performing management operations at the CDB level – “managing many as one” – we can achieve great reductions in operating expenses (OpEx) as well, but we retain granular control where appropriate. Furthermore, the “pluggability” capability gives us portability and this adds a tremendous amount of agility. We can simply unplug a PDB from one CDB and plug it into another CDB, for example to move it from one SLA tier to another. I'll explore all these new capabilities in much more detail in a future posting.  Use Cases We can identify a number of use cases for Oracle Multitenant. Here are a few of the major ones. 0 0 1 113 650 Oracle Corporation 5 1 762 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-language:JA;} Development / Testing where individual engineers need rapid provisioning and recycling of private copies of a few "master test databases" Consolidation of disparate applications using fewer, more powerful servers Software as a Service deploying separate copies of identical applications to individual tenants Database as a Service typically self-service provisioning of databases on the private cloud Application Distribution from ISV / Installation by Customer Eliminating many typical installation steps (create schema, import seed data, import application code PL/SQL…) - just plug in a PDB! High volume data distribution literally via disk drives in envelopes distributed by truck! - distribution of things like GIS or MDM master databases …various others! Benefits Previous approaches to consolidation have involved a trade-off between reductions in Capital Expenses (CapEx) and Operating Expenses (OpEx), and they’ve usually come at the expense of agility. With Oracle Multitenant you can have your cake and eat it: Minimize CapEx More Applications per server Minimize OpEx Manage many as one Standardized procedures and services Rapid provisioning Maximize Agility Cloning for development and testing Portability through pluggability Scalability with RAC Ease of Adoption Applications run unchanged It’s a pure deployment choice. Neither the database backend nor the application needs to be changed. In future postings I’ll explore various aspects in more detail. However, if you feel compelled to devour everything you can about Oracle Multitenant this very minute, have no fear. Visit the Multitenant page on OTN and explore the various resources we have available there. Among these, Oracle Distinguished Product Manager Bryn Llewellyn has written an excellent, thorough, and exhaustively detailed White Paper about Oracle Multitenant, which is available here.  Follow me  I tweet @OraclePDB #OracleMultitenant

  Read the article

• How to find minimum weight with maximum cost in 0-1 Knapsack algorithm?

  - by Nitin9791

  I am trying to solve a spoj problem Party Schedule the problem statement is- You just received another bill which you cannot pay because you lack the money. Unfortunately, this is not the first time to happen, and now you decide to investigate the cause of your constant monetary shortness. The reason is quite obvious: the lion's share of your money routinely disappears at the entrance of party localities. You make up your mind to solve the problem where it arises, namely at the parties themselves. You introduce a limit for your party budget and try to have the most possible fun with regard to this limit. You inquire beforehand about the entrance fee to each party and estimate how much fun you might have there. The list is readily compiled, but how do you actually pick the parties that give you the most fun and do not exceed your budget? Write a program which finds this optimal set of parties that offer the most fun. Keep in mind that your budget need not necessarily be reached exactly. Achieve the highest possible fun level, and do not spend more money than is absolutely necessary. Input The first line of the input specifies your party budget and the number n of parties. The following n lines contain two numbers each. The first number indicates the entrance fee of each party. Parties cost between 5 and 25 francs. The second number indicates the amount of fun of each party, given as an integer number ranging from 0 to 10. The budget will not exceed 500 and there will be at most 100 parties. All numbers are separated by a single space. There are many test cases. Input ends with 0 0. Output For each test case your program must output the sum of the entrance fees and the sum of all fun values of an optimal solution. Both numbers must be separated by a single space. Example Sample input: 50 10 12 3 15 8 16 9 16 6 10 2 21 9 18 4 12 4 17 8 18 9 50 10 13 8 19 10 16 8 12 9 10 2 12 8 13 5 15 5 11 7 16 2 0 0 Sample output: 49 26 48 32 now I know that it is an advance version of 0/1 knapsack problem where along with maximum cost we also have to find minimum weight that is less than a a given weight and have maximum cost. so I have used dp to solve this problem but still get a wrong awnser on submission while it is perfectly fine with given test cases. My code is typedef vector<int> vi; #define pb push_back #define FOR(i,n) for(int i=0;i<n;i++) int main() { //freopen("input.txt","r",stdin); while(1) { int W,n; cin>>W>>n; if(W==0 && n==0) break; int K[n+1][W+1]; vi val,wt; FOR(i,n) { int x,y; cin>>x>>y; wt.pb(x); val.pb(y); } FOR(i,n+1) { FOR(w,W+1) { if(i==0 || w==0) { K[i][w]=0; } else if (wt[i-1] <= w) { if(val[i-1] + K[i-1][w-wt[i-1]]>=K[i-1][w]) { K[i][w]=val[i-1] + K[i-1][w-wt[i-1]]; } else { K[i][w]=K[i-1][w]; } } else { K[i][w] = K[i-1][w]; } } } int a1=K[n][W],a2; for(int j=0;j<W;j++) { if(K[n][j]==a1) { a2=j; break; } } cout<<a2<<" "<<a1<<"\n"; } return 0; } Could anyone suggest what am I missing??

  Read the article

• Navigation in Win8 Metro Style applications

  - by Dennis Vroegop

  In Windows 8, Touch is, as they say, a first class citizen. Now, to be honest: they also said that in Windows 7. However in Win8 this is actually true. Applications are meant to be used by touch. Yes, you can still use mouse, keyboard and pen and your apps should take that into account but touch is where you should focus on initially. Will all users have touch enabled devices? No, not in the first place. I don’t think touchscreens will be on every device sold next year. But in 5 years? Who knows? Don’t forget: if your app is successful it will be around for a long time and by that time touchscreens will be everywhere. Another reason to embrace touch is that it’s easier to develop a touch-oriented app and then to make sure that keyboard, nouse and pen work as doing it the other way around. Porting a mouse-based application to a touch based application almost never works. The reverse gives you much more chances for success. That being said, there are some things that you need to think about. Most people have more than one finger, while most users only use one mouse at the time. Still, most touch-developers translate their mouse-knowledge to the touch and think they did a good job. Martin Tirion from Microsoft said that since Touch is a new language people face the same challenges they do when learning a new real spoken language. The first thing people try when learning a new language is simply replace the words in their native language to the newly learned words. At first they don’t care about grammar. To a native speaker of that other language this sounds all wrong but they still will be able to understand what the intention was. If you don’t believe me: try Google translate to translate something for you from your language to another and then back and see what happens. The same thing happens with Touch. Most developers translate a mouse-click into a tap-event and think they’re done. Well matey, you’re not done. Not by far. There are things you can do with a mouse that you cannot do with touch. Think hover. A mouse has the ability to ‘slide’ over UI elements. Touch doesn’t (I know: with Pen you can do this but I’m talking about actual fingers here). A touch is either there or it isn’t. And right-click? Forget about it. A click is a click.  Yes, you have more than one finger but the machine doesn’t know which finger you use… The other way around is also true. Like I said: most users only have one mouse but they are likely to have more than one finger. So how do we take that into account? Thinking about this is really worth the time: you might come up with some surprisingly good ideas! Still: don’t forget that not every user has touch-enabled hardware so make sure your app is useable for both groups. Keep this in mind: we’re going to need it later on! Now. Apps should be easy to use. You don’t want your user to read through pages and pages of documentation before they can use the app. Imagine that spotter next to an airfield suddenly seeing a prototype of a Concorde 2 landing on the nearby runway. He probably wants to enter that information in our app NOW and not after he’s taken a 3 day course. Even if he still has to download the app, install it for the first time and then run it he should be on his way immediately. At least, fast enough to note down the details of that unique, rare and possibly exciting sighting he just did. So.. How do we do this? Well, I am not talking about games here. Games are in a league of their own. They fall outside the scope of the apps I am describing. But all the others can roughly be characterized as being one of two flavors: the navigation is either flat or hierarchical. That’s it. And if it’s hierarchical it’s no more than three levels deep. Not more. Your users will get lost otherwise and we don’t want that. Flat is simple. Just imagine we have one screen that is as high as our physical screen is and as wide as you need it to be. Don’t worry if it doesn’t fit on the screen: people can scroll to the right and left. Don’t combine up/down and left/right scrolling: it’s confusing. Next to that, since most users will hold their device in landscape mode it’s very natural to scroll horizontal. So let’s use that when we have a flat model. The same applies to the hierarchical model. Try to have at most three levels. If you need more space, find a way to group the items in such a way that you can fit it in three, very wide lanes. At the highest level we have the so called hub level. This is the entry point of the app and as such it should give the user an immediate feeling of what the app is all about. If your app has categories if items then you might show these categories here. And while you’re at it: also show 2 or 3 of the items itself here to give the user a taste of what lies beneath. If the user selects a category you go to the section part. Here you show several sections (again, go as wide as you need) with again some detail examples. After that: the details layer shows each item. By giving some samples of the underlaying layer you achieve several things: you make the layer attractive by showing several different things, you show some highlights so the user sees actual content and you provide a shortcut to the layers underneath. The image below is borrowed from the http://design.windows.com website which has tons and tons of examples: For our app we’ll use this layout. So what will we show? Well, let’s see what sorts of features our app has to offer. I’ll repeat them here: Note planes Add pictures of that plane Notify friends of new spots Share new spots on social media Write down arrival times Write down departure times Write down the runway they take I am sure you can think of some more items but for now we'll use these. In the hub we’ll show something that represents “Spots”, “Friends”, “Social”. Apparently we have an inner list of spotter-friends that are in the app, while we also have to whole world in social. In the layer below we show something else, depending on what the user choose. When they choose “Spots” we’ll display the last spots, last spots by our friends (so we can actually jump from this category to the one next to it) and so on. When they choose a “spot” (or press the + icon in the App bar, which I’ll talk about next time) they go to the lowest and final level that shows details about that spot, including a picture, date and time and the notes belonging to that entry. You’d be amazed at how easy it is to organize your app this way. If you don’t have enough room in these three layers you probably could easily get away with grouping items. Take a look at our hub: we have three completely different things in one place. If you still can’t fit it all in in a logical and consistent way, chances are you are trying to do too much in this app. Go back to your mission statement, determine if it is specific enough and if your feature list helps that statement or makes it unclear. Go ahead. Give it a go! Next time we’ll talk about the look and feel, the charms and the app-bar….

  Read the article

• CodePlex Daily Summary for Sunday, October 28, 2012

  CodePlex Daily Summary for Sunday, October 28, 2012Popular ReleasesPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 7): This release is compatible with the version of the Smooth Streaming SDK released today (10/26). Release 1 of the player framework is expected to be available next week. IMPROVEMENTS & FIXESIMPORTANT: List of breaking changes from preview 6 Support for the latest smooth streaming SDK. Xaml only: Support for moving any of the UI elements outside the MediaPlayer (e.g. into the appbar). Note: Equivelent changes to the JS version due in coming week. Support for localizing all text used in t...Send multiple SMS via Way2SMS C#: SMS 1.1: Added support for 160by2Quick Launch: Quick Launch 1.0: A Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsPress Win+Q and start to search and run. http://www.codeplex.com/Download?ProjectName=quicklaunch&DownloadId=523536Orchard Project: Orchard 1.6: Please read our release notes for Orchard 1.6: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.ZXMAK2: Version 2.6.7.0: - small performance improvements - fix & improvements for Direct3D renderer (thanks to zebest for testing)Media Companion: Media Companion 3.507b: Once again, it has been some time since our release, and there have been a number changes since then. It is hoped that these changes will address some of the issues users have been experiencing, and of course, work continues! New Features: Added support for adding Home Movies. Option to sort Movies by votes. Added 'selectedBrowser' preference used when opening links in an external browser. Added option to fallback to getting runtime from the movie file if not available on IMDB. Added new Big...MSBuild Extension Pack: October 2012: Release Blog Post The MSBuild Extension Pack October 2012 release provides a collection of over 475 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...NAudio: NAudio 1.6: Release notes at http://mark-dot-net.blogspot.co.uk/2012/10/naudio-16-release-notes-10th.htmlPowerShell Community Extensions: 2.1 Production: PowerShell Community Extensions 2.1 Release NotesOct 25, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. See the ReleaseNotes.txt download above for more information.Umbraco CMS: Umbraco 4.9.1: Umbraco 4.9.1 is a bugfix release to fix major issues in 4.9.0 BugfixesThe full list of fixes can be found in the issue tracker's filtered results. A summary: Split buttons work again, you can now also scroll easier when the list is too long for the screen Media and Content pickers have information of the full path of the picked item Fixed: Publish status may not be accurate on nodes with large doctypes Fixed: 2 media folders and recycle bins after upgrade to 4.9 The template/code ...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2...Rawr: Rawr 5.0.2: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...MCEBuddy 2.x: MCEBuddy 2.3.5: Changelog for 2.3.5 (32bit and 64bit) 1. Fixed a bug causing MCEBuddy to crash during or after installation on Windows XP 2. Bugfix for resource leak with UPnP which would lead to a failure after many days 3. Increased the UPnP discovery re-scan interval from 10 minutes to 30 minutes 4. Added support for specifying TVDB and IMDB id’s in the conversion task page (forcing the internet lookup for metadata)CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1025.5): [NEW] Support for connecting to CRM Online via Office 365 (OSDP) [NEW] Current connection information and loaded ribbon name are displayed in the status bar [IMPROVED] Connect dialog minor improvements and error message descriptions [IMPROVED] Connecting to a CRM server will close currently loaded ribbon upon confirmation (if another ribbon was loaded previously) [FIX] Fixed bug in Open Ribbon dialog which would not allow to refresh entity list more than onceReadable Passphrase Generator: KeePass Plugin 0.8.0: Changes: Interrogative phrases (questions) like why did the statesman burgle amidst lucid sunlamps Support transitive / intransitive verbs (whether a verb needs a subject or not). Change adverbs to be either before or after the verb, at random. Add an "equal" version of each strength, where each possibility is equally likely (for password purists). 3401 words in the default dictionary (~400 more than previous release) Fixed bugs when choosing verb tenseseWay payment gateway provider for NB_Store: NB_Store_Gateway_eWay: Install package for eWAY gateway for NB_Store.fastJSON: v2.0.9: - added support for root level DataSet and DataTable deserialize (you have to do ToObject<DataSet>(...) ) - added dataset testsMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.72: Fix for Issue #18819 - bad optimization of return/assign operator.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.390: Version 2.5.0.390 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Fix recent file list remove issue. WAF: Minor code improvements. BookLibrary: Fix Blend design time support o...Fiskalizacija za developere: FiskalizacijaDev 1.1: Ovo je prva nadogradnja ovog projekta nakon inicijalnog predstavljanja - dodali smo nekoliko feature-a, bilo zato što smo sami primijetili da bi ih bilo dobro dodati, bilo na osnovu vaših sugestija - hvala svima koji su se ukljucili :) Ovo su stvari riješene u v1.1.: 1. Bilo bi dobro da se XML dokument koji se šalje u CIS može snimiti u datoteku (http://fiskalizacija.codeplex.com/workitem/612) 2. Podrška za COM DLL (VB6) (http://fiskalizacija.codeplex.com/workitem/613) 3. Podrška za DOS (unu...New ProjectsAnalytics for Windows 8: SIlverlight / WPF User control integrated in WPF / SILVERLIGHT / WINDOWS PHONE Apps in order to collect user data ( Action , Timespan etc ) . bGui - User Interfaces in Batch: A small project for allowing basic user interface creation in batch. Still under strict development, see documentation for current functionality.Blog Projects: Projects wich i use in my blog postsCloud Sync Service: This Windows Service lets you sync your files across other machines by using Cloud File Storage as gateway. Amazon S3 and Windows Azure supported.CocoaVP8: CocoaVP8 is a dual-licensed commercial/GPL native library which allows Mac and iOS applications to easily use the VP8 video codec.DarkSky Orchard Microdata: Microdata is an Orchard module that exposes a MicrodataPart that will render microdata for your content items.Gerenciador Paroquial: Um conjunto de ferramentas desenvolvido para auxiliar a administração de comunidades eclesiásticas episcopais.Quick Launch: Quick Launch - a New Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsRDI Alef: RDI ALEF (ALef Entities Framework) é uma biblioteca desenvolvida em C# para persistência de objetos em um banco de dados. Encapsula um manipulador SQL e o funciSend multiple SMS via Way2SMS C#: Way2SMS, 160BY2, SMS, INDIATrending: Trending program; calculates the highest and lowest changes in frequency of specific words in two files.

  Read the article

• More localized, efficient Lowest Common Ancestor algorithm given multiple binary trees?

  - by mstksg

  I have multiple binary trees stored as an array. In each slot is either nil (or null; pick your language) or a fixed tuple storing two numbers: the indices of the two "children". No node will have only one child -- it's either none or two. Think of each slot as a binary node that only stores pointers to its children, and no inherent value. Take this system of binary trees: 0 1 / \ / \ 2 3 4 5 / \ / \ 6 7 8 9 / \ 10 11 The associated array would be: 0 1 2 3 4 5 6 7 8 9 10 11 [ [2,3] , [4,5] , [6,7] , nil , nil , [8,9] , nil , [10,11] , nil , nil , nil , nil ] I've already written simple functions to find direct parents of nodes (simply by searching from the front until there is a node that contains the child) Furthermore, let us say that at relevant times, both all trees are anywhere between a few to a few thousand levels deep. I'd like to find a function P(m,n) to find the lowest common ancestor of m and n -- to put more formally, the LCA is defined as the "lowest", or deepest node in which have m and n as descendants (children, or children of children, etc.). If there is none, a nil would be a valid return. Some examples, given our given tree: P( 6,11) # => 2 P( 3,10) # => 0 P( 8, 6) # => nil P( 2,11) # => 2 The main method I've been able to find is one that uses an Euler trace, which turns the given tree, with a node A to be the invisible parent of 0 and 1 with a depth of -1, into: A-0-2-6-2-7-10-7-11-7-2-0-3-0-A-1-4-1-5-8-5-9-5-1-A And from that, simply find the node between your given m and n that has the lowest number; For example, to find P(6,11), look for a 6 and an 11 on the trace. The number between them that is the lowest is 2, and that's your answer. If A is in between them, return nil. -- Calculating P(6,11) -- A-0-2-6-2-7-10-7-11-7-2-0-3-0-A-1-4-1-5-8-5-9-5-1-A ^ ^ ^ | | | m lowest n Unfortunately, I do believe that finding the Euler trace of a tree that can be several thousands of levels deep is a bit machine-taxing...and because my tree is constantly being changed throughout the course of the programming, every time I wanted to find the LCA, I'd have to re-calculate the Euler trace and hold it in memory every time. Is there a more memory efficient way, given the framework I'm using? One that maybe iterates upwards? One way I could think of would be the "count" the generation/depth of both nodes, and climb the lowest node until it matched the depth of the highest, and increment both until they find someone similar. But that'd involve climbing up from level, say, 3025, back to 0, twice, to count the generation, and using a terribly inefficient climbing-up algorithm in the first place, and then re-climbing back up. Are there any other better ways?

  Read the article

• how to pull href link

  - by user1751494

  I am trying to pull a link from a page that is in a formal I can't seem to find by simply googling... it might be simple but xpath is not my area of expertise I am using c# and trying to pull the link and just write it to the console to figure out how to get the link here is my C# code var document = webGet.Load("http://classifieds.castanet.net/cat/vehicles/cars/0_-_4_years_old/"); var browser = document.DocumentNode.SelectSingleNode("//a[starts-with(@href,'/details/')]"); if (browser != null) { string htmlbody = browser.OuterHtml; Console.WriteLine(htmlbody); } the html code section is <div class="last">&hellip;</div><a href="/cat/vehicles/cars/0_-_4_years_old/?p=13">13</a><a href="/cat/vehicles/cars/0_-_4_years_old/?p=2">&raquo;</a> <select name="sortby" class="sortby" onchange="doSort(this);"> <option value="">Most Recent</option> <option value="of" >Oldest First</option> <option value="mw" >Most Views</option> <option value="lw" >Fewest Views</option> <option value="lp" >Lowest Price</option> <option value="hp" >Highest Price</option> </select><div style="clear:both"></div> </div> <br /><br /><br /> <a href="/details/2008_vw_gti/1454282/" class="prod_container" > <h2>2008 VW GTi</h2> <div style="float:left; width:122px; z-index:1000"> <div class="thumb"><img src="http://c.castanet.net/img/28/thumbs/1454282-1-1.jpg" border="0"/></div> <div class="clear"></div> mls </div> <div class="descr"> The most fun car I have owned. Dolphin Grey, 4 door, Dual Climate control, DRG Transmission with paddle shift. Leather... </div> <div class="pdate"> <p class="price">$19,000.00</p> <p class="date">Kelowna<br />Posted: Oct 15, 2:54 PM<br />Views: 349</p> </div> <div style="clear:both" ></div> <div class="seal"><img src="/images/bookmark.png" /></div> </a> <a href="/details/price_drop_gorgeous_rare_white_2009_honda_accord_ex-l_coupe/1447341/" class="prod_container" > <h2>PRICE DROP!!! Gorgeous Rare White 2009 Honda Accord EX-L Coupe </h2> <div style="float:left; width:122px; z-index:1000"> <div class="thumb"><img src="http://c.castanet.net/img/28/thumbs/1447341-1-1.jpg" border="0"/></div> <div class="clear"></div> sun2010 </div> <div class="descr"> the link I'm trying to get is the "/details/2008_vw_gti/1454282/" part. THanks

  Read the article

• Java algorithm for normalizing audio

  - by Marty Pitt

  I'm trying to normalize an audio file of speech. Specifically, where an audio file contains peaks in volume, I'm trying to level it out, so the quiet sections are louder, and the peaks are quieter. I know very little about audio manipulation, beyond what I've learnt from working on this task. Also, my math is embarrassingly weak. I've done some research, and the Xuggle site provides a sample which shows reducing the volume using the following code: (full version here) @Override public void onAudioSamples(IAudioSamplesEvent event) { // get the raw audio byes and adjust it's value ShortBuffer buffer = event.getAudioSamples().getByteBuffer().asShortBuffer(); for (int i = 0; i < buffer.limit(); ++i) buffer.put(i, (short)(buffer.get(i) * mVolume)); super.onAudioSamples(event); } Here, they modify the bytes in getAudioSamples() by a constant of mVolume. Building on this approach, I've attempted a normalisation modifies the bytes in getAudioSamples() to a normalised value, considering the max/min in the file. (See below for details). I have a simple filter to leave "silence" alone (ie., anything below a value). I'm finding that the output file is very noisy (ie., the quality is seriously degraded). I assume that the error is either in my normalisation algorithim, or the way I manipulate the bytes. However, I'm unsure of where to go next. Here's an abridged version of what I'm currently doing. Step 1: Find peaks in file: Reads the full audio file, and finds this highest and lowest values of buffer.get() for all AudioSamples @Override public void onAudioSamples(IAudioSamplesEvent event) { IAudioSamples audioSamples = event.getAudioSamples(); ShortBuffer buffer = audioSamples.getByteBuffer().asShortBuffer(); short min = Short.MAX_VALUE; short max = Short.MIN_VALUE; for (int i = 0; i < buffer.limit(); ++i) { short value = buffer.get(i); min = (short) Math.min(min, value); max = (short) Math.max(max, value); } // assign of min/max ommitted for brevity. super.onAudioSamples(event); } Step 2: Normalize all values: In a loop similar to step1, replace the buffer with normalized values, calling: buffer.put(i, normalize(buffer.get(i)); public short normalize(short value) { if (isBackgroundNoise(value)) return value; short rawMin = // min from step1 short rawMax = // max from step1 short targetRangeMin = 1000; short targetRangeMax = 8000; int abs = Math.abs(value); double a = (abs - rawMin) * (targetRangeMax - targetRangeMin); double b = (rawMax - rawMin); double result = targetRangeMin + ( a/b ); // Copy the sign of value to result. result = Math.copySign(result,value); return (short) result; } Questions: Is this a valid approach for attempting to normalize an audio file? Is my math in normalize() valid? Why would this cause the file to become noisy, where a similar approach in the demo code doesn't?

  Read the article

• How to make a correct if-statement to filter out values from a xml-file

  - by Garreth 00

  Edit 3: As requested, I'm trying to simplify my question. Here is a sample of some of my data from a xml file: <entry> <title>Entry 1</title> <f:max_value_a>499 999</f:max_value_a> <f:max_value_b>999 999</f:max_value_b> <f:min_value_a>0</f:min_value_a> <f:min_value_b>500 000</f:min_value_b> <f:min_value_c>1 000 000</f:min_value_c> <f:value_for_a>5,10</f:value_for_a> <f:value_for_b>4,50</f:value_for_b> <f:value_for_c>3,90</f:value_for_c> </entry> <entry> <title>Entry 2</title> <f:min_value_a>0</f:min_value_a> <f:value_for_a>4,20</f:value_for_a> </entry> <entry> <title>Entry 3</title> <f:max_value_a>1 999 999</f:max_value_a> <f:min_value_a>100 000</f:min_value_a> <f:min_value_b>2 000 000</f:min_value_b> <f:value_for_a>3,735</f:value_for_a> <f:value_for_b>3,445</f:value_for_b> </entry> f:value_for_d is the highest value, and f:value_for_c is lower than d, and so on. I have a dynamic targetvalue (lets just go with 2 000 000 in this example) I want to get the value where max_value is greater than the targetvalue, but sometimes max_value is not defined and then set to "0". "0" in max_value should mean unlimited "roof". The min_value can not be greater than targetvalue, but sometimes min_value is not defined and then set to "0". "0" min_value should mean a unlimited "floor". I have tried with this code if ($value_for_d > 0 ){ if (($min_value_d <= $targetvalue) xor ($min_value_d == 0)){ if (($max_value_d >= $targetvalue) xor ($max_value_d == 0)){ $query_result = TRUE; $value = $value_for_d; } } }elseif ($value_for_c > 0 ){ if (($min_value_c <= $targetvalue) xor ($min_value_c == 0)){ if (($max_value_c >= $targetvalue) xor ($max_value_c == 0)){ $query_result = TRUE; $value = $value_for_c; } } }elseif ($value_for_b > 0 ){ if (($min_value_b <= $targetvalue) xor ($min_value_b == 0)){ if (($max_value_b >= $targetvalue) xor ($max_value_b == 0)){ $query_result = TRUE; $value = $value_for_b; } } }elseif ($value_for_a > 0 ){ if (($min_value_a <= $targetvalue) xor ($min_value_a == 0)){ if (($max_value_a >= $targetvalue) xor ($max_value_a == 0)){ $query_result = TRUE; $value = $value_for_a; } } } If I run this code with a targetvalue of "2 000 000", I get this result: Entry 1 - 3.9 (correct value is 3.9) Entry 2 - 0 (correct value is 4.2) Entry 3 - 3.445 (correct value is 3.445) If I set the targetvalue to even lower, to 500 000, I get 0 on all my entries.

  Read the article

• Trying to create an image list based on what is defined as the order, and loosing

  - by user1691463

  I have a custom created module for Joomla 2.5 and within the params of the module, and have a loop that is not outputting as expected. I have the following parameters (fields) int he module: Order Thumb image Image Title Full-size image Now there are 10 sets of these group of 4 params. What I am trying to do is loop through each of the object sets, 10 of them, and on each iteration, build an HTML image list structure. The if statement is building the HTML structure for the sets that have an order value that is greater than 0, and the else is creating the html for those sets that do not have a value greater that 0. The goal is to create two variables and then concatenate the the strings together; the leading set are the sets that have an order defined. This is not happening and every thrid loop seems like it is missing. Here is the order as it is set in the 10 sets Set 1 = 0 Set 2 = 4 Set 3 = 1 Set 4 = 0 Set 5 = 5 Set 6 = 0 Set 7 = 0 Set 8 = 6 Set 9 = 3 Set 10 = 9 However, the outcomes is: 9 5 1 4 6 7 10 Instead of the expected: 3 9 2 5 8 1 (below here are those sets that were not greater than 0 in order of appearance) 4 6 7 whats wrong here that I can not see <?php for ($i = 1; $i <= 10; $i++) { $order = $params->get('order'.$i);#get order for main loop of 10 $active = ""; if ($order > 0) {#Check if greater than 0 for ($n = 1; $n <= 10; $n++) {#loop through all order fields looking and build html lowest to highest; $ordercheck =$params->get('order'.$n); if ($ordercheck == $i) { $img = $params->get('image'.$n); $fimage = $params->get('image'.$n.'fullimage'); $title = $params->get('image'.$n.'alttext'); $active = ""; $active = $active . '<li>'; $active = $active . '<a href="'.$fimage.'" rel="prettyPhoto[gallery1]" title="'.$title.'">'; $active = $active . '<img src="'.$img.'" alt="'.$title.'" />'; $active = $active . '</a>'; $active = $active . '</li>'; $leading = $leading . $active; } } } else { #if the itteration $order was not greater than 0, build in order of accourance $img = $params->get('image'.$i); $fimage = $params->get('image'.$i.'fullimage'); $title = $params->get('image'.$i.'alttext'); $active = $active . '<li>'; $active = $active . '<a href="'.$fimage.'" rel="prettyPhoto[gallery1]" title="'.$title.'">'; $active = $active . '<img src="'.$img.'" alt="'.$title.'" />'; $active = $active . '</a></li>'; $unordered = $unordered . $active; } $imagesList = $leading . $unordered; } ?>

  Read the article

• Is your team is a high-performing team?

  As a child I can remember looking out of the car window as my father drove along the Interstate in Florida while seeing prisoners wearing bright orange jump suits and prison guards keeping a watchful eye on them. The prisoners were taking part in a prison road gang. These road gangs were formed to help the state maintain the state highway infrastructure. The prisoner’s primary responsibilities are to pick up trash and debris from the roadway. This is a prime example of a work group or working group used by most prison systems in the United States. Work groups or working groups can be defined as a collection of individuals or entities working together to achieve a specific goal or accomplish a specific set of tasks. Typically these groups are only established for a short period of time and are dissolved once the desired outcome has been achieved. More often than not group members usually feel as though they are expendable to the group and some even dread that they are even in the group. "A team is a small number of people with complementary skills who are committed to a common purpose, performance goals, and approach for which they are mutually accountable." (Katzenbach and Smith, 1993) So how do you determine that a team is a high-performing team?  This can be determined by three base line criteria that include: consistently high quality output, the promotion of personal growth and well being of all team members, and most importantly the ability to learn and grow as a unit. Initially, a team can successfully create high-performing output without meeting all three criteria, however this will erode over time because team members will feel detached from the group or that they are not growing then the quality of the output will decline. High performing teams are similar to work groups because they both utilize a collection of individuals or entities to accomplish tasks. What distinguish a high-performing team from a work group are its characteristics. High-performing teams contain five core characteristics. These characteristics are what separate a group from a team. The five characteristics of a high-performing team include: Purpose, Performance Measures, People with Tasks and Relationship Skills, Process, and Preparation and Practice. A high-performing team is much more than a work group, and typically has a life cycle that can vary from team to team. The standard team lifecycle consists of five states and is comparable to a human life cycle. The five states of a high-performing team lifecycle include: Formulating, Storming, Normalizing, Performing, and Adjourning. The Formulating State of a team is first realized when the team members are first defined and roles are assigned to all members. This initial stage is very important because it can set the tone for the team and can ultimately determine its success or failure. In addition, this stage requires the team to have a strong leader because team members are normally unclear about specific roles, specific obstacles and goals that my lay ahead of them.  Finally, this stage is where most team members initially meet one another prior to working as a team unless the team members already know each other. The Storming State normally arrives directly after the formulation of a new team because there are still a lot of unknowns amongst the newly formed assembly. As a general rule most of the parties involved in the team are still getting used to the workload, pace of work, deadlines and the validity of various tasks that need to be performed by the group.  In this state everything is questioned because there are so many unknowns. Items commonly questioned include the credentials of others on the team, the actual validity of a project, and the leadership abilities of the team leader.  This can be exemplified by looking at the interactions between animals when they first meet.  If we look at a scenario where two people are walking directly toward each other with their dogs. The dogs will automatically enter the Storming State because they do not know the other dog. Typically in this situation, they attempt to define which is more dominating via play or fighting depending on how the dogs interact with each other. Once dominance has been defined and accepted by both dogs then they will either want to play or leave depending on how the dogs interacted and other environmental variables. Once the Storming State has been realized then the Normalizing State takes over. This state is entered by a team once all the questions of the Storming State have been answered and the team has been tested by a few tasks or projects.  Typically, participants in the team are filled with energy, and comradery, and a strong alliance with team goals and objectives.  A high school football team is a perfect example of the Normalizing State when they start their season.  The player positions have been assigned, the depth chart has been filled and everyone is focused on winning each game. All of the players encourage and expect each other to perform at the best of their abilities and are united by competition from other teams. The Performing State is achieved by a team when its history, working habits, and culture solidify the team as one working unit. In this state team members can anticipate specific behaviors, attitudes, reactions, and challenges are seen as opportunities and not problems. Additionally, each team member knows their role in the team’s success, and the roles of others. This is the most productive state of a group and is where all the time invested working together really pays off. If you look at an Olympic figure skating team skate you can easily see how the time spent working together benefits their performance. They skate as one unit even though it is comprised of two skaters. Each skater has their routine completely memorized as well as their partners. This allows them to anticipate each other’s moves on the ice makes their skating look effortless. The final state of a team is the Adjourning State. This state is where accomplishments by the team and each individual team member are recognized. Additionally, this state also allows for reflection of the interactions between team members, work accomplished and challenges that were faced. Finally, the team celebrates the challenges they have faced and overcome as a unit. Currently in the workplace teams are divided into two different types: Co-located and Distributed Teams. Co-located teams defined as the traditional group of people working together in an office, according to Andy Singleton of Assembla. This traditional type of a team has dominated business in the past due to inadequate technology, which forced workers to primarily interact with one another via face to face meetings.  Team meetings are primarily lead by the person with the highest status in the company. Having personally, participated in meetings of this type, usually a select few of the team members dominate the flow of communication which reduces the input of others in group discussions. Since discussions are dominated by a select few individuals the discussions and group discussion are skewed in favor of the individuals who communicate the most in meetings. In addition, Team members might not give their full opinions on a topic of discussion in part not to offend or create controversy amongst the team and can alter decision made in meetings towards those of the opinions of the dominating team members. Distributed teams are by definition spread across an area or subdivided into separate sections. That is exactly what distributed teams when compared to a more traditional team. It is common place for distributed teams to have team members across town, in the next state, across the country and even with the advances in technology over the last 20 year across the world. These teams allow for more diversity compared to the other type of teams because they allow for more flexibility regarding location. A team could consist of a 30 year old male Italian project manager from New York, a 50 year old female Hispanic from California and a collection of programmers from India because technology allows them to communicate as if they were standing next to one another.  In addition, distributed team members consult with more team members prior to making decisions compared to traditional teams, and take longer to come to decisions due to the changes in time zones and cultural events. However, team members feel more empowered to speak out when they do not agree with the team and to notify others of potential issues regarding the work that the team is doing. Virtual teams which are a subset of the distributed team type is changing organizational strategies due to the fact that a team can now in essence be working 24 hrs a day because of utilizing employees in various time zones and locations.  A primary example of this is with customer services departments, a company can have multiple call centers spread across multiple time zones allowing them to appear to be open 24 hours a day while all a employees work from 9AM to 5 PM every day. Virtual teams also allow human resources departments to go after the best talent for the company regardless of where the potential employee works because they will be a part of a virtual team all that is need is the proper technology to be setup to allow everyone to communicate. In addition to allowing employees to work from home, the company can save space and resources by not having to provide a desk for every team member. In fact, those team members that randomly come into the office can actually share one desk amongst multiple people. This is definitely a cost cutting plus given the current state of the economy. One thing that can turn a team into a high-performing team is leadership. High-performing team leaders need to focus on investing in ongoing personal development, provide team members with direction, structure, and resources needed to accomplish their work, make the right interventions at the right time, and help the team manage boundaries between the team and various external parties involved in the teams work. A team leader needs to invest in ongoing personal development in order to effectively manage their team. People have said that attitude is everything; this is very true about leaders and leadership. A team takes on the attitudes and behaviors of its leaders. This can potentially harm the team and the team’s output. Leaders must concentrate on self-awareness, and understanding their team’s group dynamics to fully understand how to lead them. In addition, always learning new leadership techniques from other effective leaders is also very beneficial. Providing team members with direction, structure, and resources that they need to accomplish their work collectively sounds easy, but it is not.  Leaders need to be able to effectively communicate with their team on how their work helps the company reach for its organizational vision. Conversely, the leader needs to allow his team to work autonomously within specific guidelines to turn the company’s vision into a reality.  This being said the team must be appropriately staffed according to the size of the team’s tasks and their complexity. These tasks should be clear, and be meaningful to the company’s objectives and allow for feedback to be exchanged with the leader and the team member and the leader and upper management. Now if the team is properly staffed, and has a clear and full understanding of what is to be done; the company also must supply the workers with the proper tools to achieve the tasks that they are asked to do. No one should be asked to dig a hole without being given a shovel.  Finally, leaders must reward their team members for accomplishments that they achieve. Awards could range from just a simple congratulatory email, a party to close the completion of a large project, or other monetary rewards. Managing boundaries is very important for team leaders because it can alter attitudes of team members and can add undue stress to the team which will force them to loose focus on the tasks at hand for the group. Team leaders should promote communication between team members so that burdens are shared amongst the team and solutions can be derived from hearing the opinions of multiple sources. This also reinforces team camaraderie and working as a unit. Team leaders must manage the type and timing of interventions as to not create an even bigger mess within the team. Poorly timed interventions can really deflate team members and make them question themselves. This could really increase further and undue interventions by the team leader. Typically, the best time for interventions is when the team is just starting to form so that all unproductive behaviors are removed from the team and that it can retain focus on its agenda. If an intervention is effectively executed the team will feel energized about the work that they are doing, promote communication and interaction amongst the group and improve moral overall. High-performing teams are very import to organizations because they consistently produce high quality output and develop a collective purpose for their work. This drive to succeed allows team members to utilize specific talents allowing for growth in these areas.  In addition, these team members usually take on a sense of ownership with their projects and feel that the other team members are irreplaceable. References: http://blog.assembla.com/assemblablog/tabid/12618/bid/3127/Three-ways-to-organize-your-team-co-located-outsourced-or-global.aspx Katzenbach, J.R. & Smith, D.K. (1993). The Wisdom of Teams: Creating the High-performance Organization. Boston: Harvard Business School.

  Read the article

• Insert Record by Drag & Drop from ADF Tree to ADF Tree Table

  - by arul.wilson(at)oracle.com

  If you want to create record based on the values Dragged from ADF Tree and Dropped on a ADF Tree Table, then here you go.UseCase DescriptionUser Drags a tree node from ADF Tree and Drops it on a ADF Tree Table node. A new row gets added in the Tree Table based on the source tree node, subsequently a record gets added to the database table on which Tree table in based on.Following description helps to achieve this using ADF BC.Run the DragDropSchema.sql to create required tables.Create Business Components from tables (PRODUCTS, COMPONENTS, SUB_COMPONENTS, USERS, USER_COMPONENTS) created above.Add custom method to App Module Impl, this method will be used to insert record from view layer.   public String createUserComponents(String p_bugdbId, String p_productId, String p_componentId, String p_subComponentId){    Row newUserComponentsRow = this.getUserComponentsView1().createRow();    try {      newUserComponentsRow.setAttribute("Bugdbid", p_bugdbId);      newUserComponentsRow.setAttribute("ProductId", new oracle.jbo.domain.Number(p_productId));      newUserComponentsRow.setAttribute("Component1", p_componentId);      newUserComponentsRow.setAttribute("SubComponent", p_subComponentId);    } catch (Exception e) {        e.printStackTrace();        return "Failure";    }        return "Success";  }Expose this method to client interface.To display the root node we need a custom VO which can be achieved using below query. SELECT Users.ACTIVE, Users.BUGDB_ID, Users.EMAIL, Users.FIRSTNAME, Users.GLOBAL_ID, Users.LASTNAME, Users.MANAGER_ID, Users.MANAGER_PRIVILEGEFROM USERS UsersWHERE Users.MANAGER_ID is NULLCreate VL between UsersView and UsersRootNodeView VOs.Drop ProductsView from DC as ADF Tree to jspx page.Add Tree Level Rule based on ComponentsView and SubComponentsView.Drop UsersRootNodeView as ADF Tree TableAdd Tree Level Rules based on UserComponentsView and UsersView.Add DragSource to ADF Tree and CollectionDropTarget to ADF Tree Table respectively.Bind CollectionDropTarget's DropTarget to backing bean and implement method of signature DnDAction (DropEvent), this method gets invoked when Tree Table encounters a drop action, here details required for creating new record are captured from the drag source and passed to 'createUserComponents' method. public DnDAction onTreeDrop(DropEvent dropEvent) {      String newBugdbId = "";      String msgtxt="";            try {          // Getting the target node bugdb id          Object serverRowKey = dropEvent.getDropSite();          if (serverRowKey != null) {                  //Code for Tree Table as target              String dropcomponent = dropEvent.getDropComponent().toString();              dropcomponent = (String)dropcomponent.subSequence(0, dropcomponent.indexOf("["));              if (dropcomponent.equals("RichTreeTable")){                RichTreeTable richTreeTable = (RichTreeTable)dropEvent.getDropComponent();                richTreeTable.setRowKey(serverRowKey);                int rowIndexTreeTable = richTreeTable.getRowIndex();                //Drop Target Logic                if (((JUCtrlHierNodeBinding)richTreeTable.getRowData(rowIndexTreeTable)).getAttributeValue()==null) {                  //Get Parent                  newBugdbId = (String)((JUCtrlHierNodeBinding)richTreeTable.getRowData(rowIndexTreeTable)).getParent().getAttributeValue();                } else {                  if (isNum(((JUCtrlHierNodeBinding)richTreeTable.getRowData(rowIndexTreeTable)).getAttributeValue().toString())) {                    //Get Parent's parent                              newBugdbId = (String)((JUCtrlHierNodeBinding)richTreeTable.getRowData(rowIndexTreeTable)).getParent().getParent().getAttributeValue();                  } else{                      //Dropped on USER                                          newBugdbId = (String)((JUCtrlHierNodeBinding)richTreeTable.getRowData(rowIndexTreeTable)).getAttributeValue();                  }                  }              }           }                     DataFlavor<RowKeySet> df = DataFlavor.getDataFlavor(RowKeySet.class);          RowKeySet droppedValue = dropEvent.getTransferable().getData(df);            Object[] keys = droppedValue.toArray();          Key componentKey = null;          Key subComponentKey = null;           // binding for createUserComponents method defined in AppModuleImpl class  to insert record in database.                      operationBinding = bindings.getOperationBinding("createUserComponents");            // get the Product, Component, Subcomponent details and insert to UserComponents table.          // loop through the keys if more than one comp/subcomponent is select.                   for (int i = 0; i < keys.length; i++) {                  System.out.println("in for :"+i);              List list = (List)keys[i];                  System.out.println("list "+i+" : "+list);              System.out.println("list size "+list.size());              if (list.size() == 1) {                                // we cannot drag and drop  the highest node !                                msgtxt="You cannot drop Products, please drop Component or SubComponent from the Tree.";                  System.out.println(msgtxt);                                this.showInfoMessage(msgtxt);              } else {                  if (list.size() == 2) {                    // were doing the first branch, in this case all components.                    componentKey = (Key)list.get(1);                    Object[] droppedProdCompValues = componentKey.getAttributeValues();                    operationBinding.getParamsMap().put("p_bugdbId",newBugdbId);                    operationBinding.getParamsMap().put("p_productId",droppedProdCompValues[0]);                    operationBinding.getParamsMap().put("p_componentId",droppedProdCompValues[1]);                    operationBinding.getParamsMap().put("p_subComponentId","ALL");                    Object result = operationBinding.execute();              } else {                    subComponentKey = (Key)list.get(2);                    Object[] droppedProdCompSubCompValues = subComponentKey.getAttributeValues();                    operationBinding.getParamsMap().put("p_bugdbId",newBugdbId);                    operationBinding.getParamsMap().put("p_productId",droppedProdCompSubCompValues[0]);                    operationBinding.getParamsMap().put("p_componentId",droppedProdCompSubCompValues[1]);                    operationBinding.getParamsMap().put("p_subComponentId",droppedProdCompSubCompValues[2]);                    Object result = operationBinding.execute();                  }                   }            }                        /* this.getCil1().setDisabled(false);            this.getCil1().setPartialSubmit(true); */                      return DnDAction.MOVE;        } catch (Exception ex) {          System.out.println("drop failed with : " + ex.getMessage());          ex.printStackTrace();                  /* this.getCil1().setDisabled(true); */          return DnDAction.NONE;          }    } Run jspx page and drop a Component or Subcomponent from Products Tree to UserComponents Tree Table.

  Read the article

• Beware Sneaky Reads with Unique Indexes

  - by Paul White NZ

  A few days ago, Sandra Mueller (twitter | blog) asked a question using twitter’s #sqlhelp hash tag: “Might SQL Server retrieve (out-of-row) LOB data from a table, even if the column isn’t referenced in the query?” Leaving aside trivial cases (like selecting a computed column that does reference the LOB data), one might be tempted to say that no, SQL Server does not read data you haven’t asked for.  In general, that’s quite correct; however there are cases where SQL Server might sneakily retrieve a LOB column… Example Table Here’s a T-SQL script to create that table and populate it with 1,000 rows: CREATE TABLE dbo.LOBtest ( pk INTEGER IDENTITY NOT NULL, some_value INTEGER NULL, lob_data VARCHAR(MAX) NULL, another_column CHAR(5) NULL, CONSTRAINT [PK dbo.LOBtest pk] PRIMARY KEY CLUSTERED (pk ASC) ); GO DECLARE @Data VARCHAR(MAX); SET @Data = REPLICATE(CONVERT(VARCHAR(MAX), 'x'), 65540);   WITH Numbers (n) AS ( SELECT ROW_NUMBER() OVER (ORDER BY (SELECT 0)) FROM master.sys.columns C1, master.sys.columns C2 ) INSERT LOBtest WITH (TABLOCKX) ( some_value, lob_data ) SELECT TOP (1000) N.n, @Data FROM Numbers N WHERE N.n <= 1000; Test 1: A Simple Update Let’s run a query to subtract one from every value in the some_value column: UPDATE dbo.LOBtest WITH (TABLOCKX) SET some_value = some_value - 1; As you might expect, modifying this integer column in 1,000 rows doesn’t take very long, or use many resources.  The STATITICS IO and TIME output shows a total of 9 logical reads, and 25ms elapsed time.  The query plan is also very simple: Looking at the Clustered Index Scan, we can see that SQL Server only retrieves the pk and some_value columns during the scan: The pk column is needed by the Clustered Index Update operator to uniquely identify the row that is being changed.  The some_value column is used by the Compute Scalar to calculate the new value.  (In case you are wondering what the Top operator is for, it is used to enforce SET ROWCOUNT). Test 2: Simple Update with an Index Now let’s create a nonclustered index keyed on the some_value column, with lob_data as an included column: CREATE NONCLUSTERED INDEX [IX dbo.LOBtest some_value (lob_data)] ON dbo.LOBtest (some_value) INCLUDE ( lob_data ) WITH ( FILLFACTOR = 100, MAXDOP = 1, SORT_IN_TEMPDB = ON ); This is not a useful index for our simple update query; imagine that someone else created it for a different purpose.  Let’s run our update query again: UPDATE dbo.LOBtest WITH (TABLOCKX) SET some_value = some_value - 1; We find that it now requires 4,014 logical reads and the elapsed query time has increased to around 100ms.  The extra logical reads (4 per row) are an expected consequence of maintaining the nonclustered index. The query plan is very similar to before (click to enlarge): The Clustered Index Update operator picks up the extra work of maintaining the nonclustered index. The new Compute Scalar operators detect whether the value in the some_value column has actually been changed by the update.  SQL Server may be able to skip maintaining the nonclustered index if the value hasn’t changed (see my previous post on non-updating updates for details).  Our simple query does change the value of some_data in every row, so this optimization doesn’t add any value in this specific case. The output list of columns from the Clustered Index Scan hasn’t changed from the one shown previously: SQL Server still just reads the pk and some_data columns.  Cool. Overall then, adding the nonclustered index hasn’t had any startling effects, and the LOB column data still isn’t being read from the table.  Let’s see what happens if we make the nonclustered index unique. Test 3: Simple Update with a Unique Index Here’s the script to create a new unique index, and drop the old one: CREATE UNIQUE NONCLUSTERED INDEX [UQ dbo.LOBtest some_value (lob_data)] ON dbo.LOBtest (some_value) INCLUDE ( lob_data ) WITH ( FILLFACTOR = 100, MAXDOP = 1, SORT_IN_TEMPDB = ON ); GO DROP INDEX [IX dbo.LOBtest some_value (lob_data)] ON dbo.LOBtest; Remember that SQL Server only enforces uniqueness on index keys (the some_data column).  The lob_data column is simply stored at the leaf-level of the non-clustered index.  With that in mind, we might expect this change to make very little difference.  Let’s see: UPDATE dbo.LOBtest WITH (TABLOCKX) SET some_value = some_value - 1; Whoa!  Now look at the elapsed time and logical reads: Scan count 1, logical reads 2016, physical reads 0, read-ahead reads 0, lob logical reads 36015, lob physical reads 0, lob read-ahead reads 15992.   CPU time = 172 ms, elapsed time = 16172 ms. Even with all the data and index pages in memory, the query took over 16 seconds to update just 1,000 rows, performing over 52,000 LOB logical reads (nearly 16,000 of those using read-ahead). Why on earth is SQL Server reading LOB data in a query that only updates a single integer column? The Query Plan The query plan for test 3 looks a bit more complex than before: In fact, the bottom level is exactly the same as we saw with the non-unique index.  The top level has heaps of new stuff though, which I’ll come to in a moment. You might be expecting to find that the Clustered Index Scan is now reading the lob_data column (for some reason).  After all, we need to explain where all the LOB logical reads are coming from.  Sadly, when we look at the properties of the Clustered Index Scan, we see exactly the same as before: SQL Server is still only reading the pk and some_value columns – so what’s doing the LOB reads? Updates that Sneakily Read Data We have to go as far as the Clustered Index Update operator before we see LOB data in the output list: [Expr1020] is a bit flag added by an earlier Compute Scalar.  It is set true if the some_value column has not been changed (part of the non-updating updates optimization I mentioned earlier). The Clustered Index Update operator adds two new columns: the lob_data column, and some_value_OLD.  The some_value_OLD column, as the name suggests, is the pre-update value of the some_value column.  At this point, the clustered index has already been updated with the new value, but we haven’t touched the nonclustered index yet. An interesting observation here is that the Clustered Index Update operator can read a column into the data flow as part of its update operation.  SQL Server could have read the LOB data as part of the initial Clustered Index Scan, but that would mean carrying the data through all the operations that occur prior to the Clustered Index Update.  The server knows it will have to go back to the clustered index row to update it, so it delays reading the LOB data until then.  Sneaky! Why the LOB Data Is Needed This is all very interesting (I hope), but why is SQL Server reading the LOB data?  For that matter, why does it need to pass the pre-update value of the some_value column out of the Clustered Index Update? The answer relates to the top row of the query plan for test 3.  I’ll reproduce it here for convenience: Notice that this is a wide (per-index) update plan.  SQL Server used a narrow (per-row) update plan in test 2, where the Clustered Index Update took care of maintaining the nonclustered index too.  I’ll talk more about this difference shortly. The Split/Sort/Collapse combination is an optimization, which aims to make per-index update plans more efficient.  It does this by breaking each update into a delete/insert pair, reordering the operations, removing any redundant operations, and finally applying the net effect of all the changes to the nonclustered index. Imagine we had a unique index which currently holds three rows with the values 1, 2, and 3.  If we run a query that adds 1 to each row value, we would end up with values 2, 3, and 4.  The net effect of all the changes is the same as if we simply deleted the value 1, and added a new value 4. By applying net changes, SQL Server can also avoid false unique-key violations.  If we tried to immediately update the value 1 to a 2, it would conflict with the existing value 2 (which would soon be updated to 3 of course) and the query would fail.  You might argue that SQL Server could avoid the uniqueness violation by starting with the highest value (3) and working down.  That’s fine, but it’s not possible to generalize this logic to work with every possible update query. SQL Server has to use a wide update plan if it sees any risk of false uniqueness violations.  It’s worth noting that the logic SQL Server uses to detect whether these violations are possible has definite limits.  As a result, you will often receive a wide update plan, even when you can see that no violations are possible. Another benefit of this optimization is that it includes a sort on the index key as part of its work.  Processing the index changes in index key order promotes sequential I/O against the nonclustered index. A side-effect of all this is that the net changes might include one or more inserts.  In order to insert a new row in the index, SQL Server obviously needs all the columns – the key column and the included LOB column.  This is the reason SQL Server reads the LOB data as part of the Clustered Index Update. In addition, the some_value_OLD column is required by the Split operator (it turns updates into delete/insert pairs).  In order to generate the correct index key delete operation, it needs the old key value. The irony is that in this case the Split/Sort/Collapse optimization is anything but.  Reading all that LOB data is extremely expensive, so it is sad that the current version of SQL Server has no way to avoid it. Finally, for completeness, I should mention that the Filter operator is there to filter out the non-updating updates. Beating the Set-Based Update with a Cursor One situation where SQL Server can see that false unique-key violations aren’t possible is where it can guarantee that only one row is being updated.  Armed with this knowledge, we can write a cursor (or the WHILE-loop equivalent) that updates one row at a time, and so avoids reading the LOB data: SET NOCOUNT ON; SET STATISTICS XML, IO, TIME OFF;   DECLARE @PK INTEGER, @StartTime DATETIME; SET @StartTime = GETUTCDATE();   DECLARE curUpdate CURSOR LOCAL FORWARD_ONLY KEYSET SCROLL_LOCKS FOR SELECT L.pk FROM LOBtest L ORDER BY L.pk ASC;   OPEN curUpdate;   WHILE (1 = 1) BEGIN FETCH NEXT FROM curUpdate INTO @PK;   IF @@FETCH_STATUS = -1 BREAK; IF @@FETCH_STATUS = -2 CONTINUE;   UPDATE dbo.LOBtest SET some_value = some_value - 1 WHERE CURRENT OF curUpdate; END;   CLOSE curUpdate; DEALLOCATE curUpdate;   SELECT DATEDIFF(MILLISECOND, @StartTime, GETUTCDATE()); That completes the update in 1280 milliseconds (remember test 3 took over 16 seconds!) I used the WHERE CURRENT OF syntax there and a KEYSET cursor, just for the fun of it.  One could just as well use a WHERE clause that specified the primary key value instead. Clustered Indexes A clustered index is the ultimate index with included columns: all non-key columns are included columns in a clustered index.  Let’s re-create the test table and data with an updatable primary key, and without any non-clustered indexes: IF OBJECT_ID(N'dbo.LOBtest', N'U') IS NOT NULL DROP TABLE dbo.LOBtest; GO CREATE TABLE dbo.LOBtest ( pk INTEGER NOT NULL, some_value INTEGER NULL, lob_data VARCHAR(MAX) NULL, another_column CHAR(5) NULL, CONSTRAINT [PK dbo.LOBtest pk] PRIMARY KEY CLUSTERED (pk ASC) ); GO DECLARE @Data VARCHAR(MAX); SET @Data = REPLICATE(CONVERT(VARCHAR(MAX), 'x'), 65540);   WITH Numbers (n) AS ( SELECT ROW_NUMBER() OVER (ORDER BY (SELECT 0)) FROM master.sys.columns C1, master.sys.columns C2 ) INSERT LOBtest WITH (TABLOCKX) ( pk, some_value, lob_data ) SELECT TOP (1000) N.n, N.n, @Data FROM Numbers N WHERE N.n <= 1000; Now here’s a query to modify the cluster keys: UPDATE dbo.LOBtest SET pk = pk + 1; The query plan is: As you can see, the Split/Sort/Collapse optimization is present, and we also gain an Eager Table Spool, for Halloween protection.  In addition, SQL Server now has no choice but to read the LOB data in the Clustered Index Scan: The performance is not great, as you might expect (even though there is no non-clustered index to maintain): Table 'LOBtest'. Scan count 1, logical reads 2011, physical reads 0, read-ahead reads 0, lob logical reads 36015, lob physical reads 0, lob read-ahead reads 15992.   Table 'Worktable'. Scan count 1, logical reads 2040, physical reads 0, read-ahead reads 0, lob logical reads 34000, lob physical reads 0, lob read-ahead reads 8000.   SQL Server Execution Times: CPU time = 483 ms, elapsed time = 17884 ms. Notice how the LOB data is read twice: once from the Clustered Index Scan, and again from the work table in tempdb used by the Eager Spool. If you try the same test with a non-unique clustered index (rather than a primary key), you’ll get a much more efficient plan that just passes the cluster key (including uniqueifier) around (no LOB data or other non-key columns): A unique non-clustered index (on a heap) works well too: Both those queries complete in a few tens of milliseconds, with no LOB reads, and just a few thousand logical reads.  (In fact the heap is rather more efficient). There are lots more fun combinations to try that I don’t have space for here. Final Thoughts The behaviour shown in this post is not limited to LOB data by any means.  If the conditions are met, any unique index that has included columns can produce similar behaviour – something to bear in mind when adding large INCLUDE columns to achieve covering queries, perhaps. Paul White Email: [email protected] Twitter: @PaulWhiteNZ

  Read the article

• Is Social Media The Vital Skill You Aren’t Tracking?

  - by HCM-Oracle

  By Mark Bennett - Originally featured in Talent Management Excellence The ever-increasing presence of the workforce on social media presents opportunities as well as risks for organizations. While on the one hand, we read about social media embarrassments happening to organizations, on the other we see that social media activities by workers and candidates can enhance a company’s brand and provide insight into what individuals are, or can become, influencers in the social media sphere. HR can play a key role in helping organizations make the most value out of the activities and presence of workers and candidates, while at the same time also helping to manage the risks that come with the permanence and viral nature of social media. What is Missing from Understanding Our Workforce? “If only HP knew what HP knows, we would be three-times more productive.”  Lew Platt, Former Chairman, President, CEO, Hewlett-Packard  What Lew Platt recognized was that organizations only have a partial understanding of what their workforce is capable of. This lack of understanding impacts the company in several negative ways: 1. A particular skill that the company needs to access in one part of the organization might exist somewhere else, but there is no record that the skill exists, so the need is unfulfilled. 2. As market conditions change rapidly, the company needs to know strategic options, but some options are missed entirely because the company doesn’t know that sufficient capability already exists to enable those options. 3. Employees may miss out on opportunities to demonstrate how their hidden skills could create new value to the company. Why don’t companies have that more complete picture of their workforce capabilities – that is, not know what they know? One very good explanation is that companies put most of their efforts into rating their workforce according to the jobs and roles they are filling today. This is the essence of two important talent management processes: recruiting and performance appraisals.  In recruiting, a set of requirements is put together for a job, either explicitly or indirectly through a job description. During the recruiting process, much of the attention is paid towards whether the candidate has the qualifications, the skills, the experience and the cultural fit to be successful in the role. This makes a lot of sense.  In the performance appraisal process, an employee is measured on how well they performed the functions of their role and in an effort to help the employee do even better next time, they are also measured on proficiency in the competencies that are deemed to be key in doing that job. Again, the logic is impeccable.  But in both these cases, two adages come to mind: 1. What gets measured is what gets managed. 2. You only see what you are looking for. In other words, the fact that the current roles the workforce are performing are the basis for measuring which capabilities the workforce has, makes them the only capabilities to be measured. What was initially meant to be a positive, i.e. identify what is needed to perform well and measure it, in order that it can be managed, comes with the unintended negative consequence of overshadowing the other capabilities the workforce has. This also comes with an employee engagement price, for the measurements and management of workforce capabilities is to typically focus on where the workforce comes up short. Again, it makes sense to do this, since improving a capability that appears to result in improved performance benefits, both the individual through improved performance ratings and the company through improved productivity. But this is based on the assumption that the capabilities identified and their required proficiencies are the only attributes of the individual that matter. Anything else the individual brings that results in high performance, while resulting in a desired performance outcome, often goes unrecognized or underappreciated at best. As social media begins to occupy a more important part in current and future roles in organizations, businesses must incorporate social media savvy and innovation into job descriptions and expectations. These new measures could provide insight into how well someone can use social media tools to influence communities and decision makers; keep abreast of trends in fast-moving industries; present a positive brand image for the organization around thought leadership, customer focus, social responsibility; and coordinate and collaborate with partners. These measures should demonstrate the “social capital” the individual has invested in and developed over time. Without this dimension, “short cut” methods may generate a narrow set of positive metrics that do not have real, long-lasting benefits to the organization. How Workforce Reputation Management Helps HR Harness Social Media With hundreds of petabytes of social media data flowing across Facebook, LinkedIn and Twitter, businesses are tapping technology solutions to effectively leverage social for HR. Workforce reputation management technology helps organizations discover, mobilize and retain talent by providing insight into the social reputation and influence of the workforce while also helping organizations monitor employee social media policy compliance and mitigate social media risk.  There are three major ways that workforce reputation management technology can play a strategic role to support HR: 1. Improve Awareness and Decisions on Talent Many organizations measure the skills and competencies that they know they need today, but are unaware of what other skills and competencies their workforce has that could be essential tomorrow. How about whether your workforce has the reputation and influence to make their skills and competencies more effective? Many organizations don’t have insight into the social media “reach” their workforce has, which is becoming more critical to business performance. These features help organizations, managers, and employees improve many talent processes and decision making, including the following: Hiring and Assignments. People and teams with higher reputations are considered more valuable and effective workers. Someone with high reputation who refers a candidate also can have high credibility as a source for hires.   Training and Development. Reputation trend analysis can impact program decisions regarding training offerings by showing how reputation and influence across the workforce changes in concert with training. Worker reputation impacts development plans and goal choices by helping the individual see which development efforts result in improved reputation and influence.   Finding Hidden Talent. Managers can discover hidden talent and skills amongst employees based on a combination of social profile information and social media reputation. Employees can improve their personal brand and accelerate their career development.  2. Talent Search and Discovery The right technology helps organizations find information on people that might otherwise be hidden. By leveraging access to candidate and worker social profiles as well as their social relationships, workforce reputation management provides companies with a more complete picture of what their knowledge, skills, and attributes are and what they can in turn access. This more complete information helps to find the right talent both outside the organization as well as the right, perhaps previously hidden talent, within the organization to fill roles and staff projects, particularly those roles and projects that are required in reaction to fast-changing opportunities and circumstances. 3. Reputation Brings Credibility Workforce reputation management technology provides a clearer picture of how candidates and workers are viewed by their peers and communities across a wide range of social reputation and influence metrics. This information is less subject to individual bias and can impact critical decision-making. Knowing the individual’s reputation and influence enables the organization to predict how well their capabilities and behaviors will have a positive effect on desired business outcomes. Many roles that have the highest impact on overall business performance are dependent on the individual’s influence and reputation. In addition, reputation and influence measures offer a very tangible source of feedback for workers, providing them with insight that helps them develop themselves and their careers and see the effectiveness of those efforts by tracking changes over time in their reputation and influence. The following are some examples of the different reputation and influence measures of the workforce that Workforce Reputation Management could gather and analyze: Generosity – How often the user reposts other’s posts. Influence – How often the user’s material is reposted by others.  Engagement – The ratio of recent posts with references (e.g. links to other posts) to the total number of posts.  Activity – How frequently the user posts. (e.g. number per day)  Impact – The size of the users’ social networks, which indicates their ability to reach unique followers, friends, or users.   Clout – The number of references and citations of the user’s material in others’ posts.  The Vital Ingredient of Workforce Reputation Management: Employee Participation “Nothing about me, without me.” Valerie Billingham, “Through the Patient’s Eyes”, Salzburg Seminar Session 356, 1998 Since data resides primarily in social media, a question arises: what manner is used to collect that data? While much of social media activity is publicly accessible (as many who wished otherwise have learned to their chagrin), the social norms of social media have developed to put some restrictions on what is acceptable behavior and by whom. Disregarding these norms risks a repercussion firestorm. One of the more recognized norms is that while individuals can follow and engage with other individual’s public social activity (e.g. Twitter updates) fairly freely, the more an organization does this unprompted and without getting permission from the individual beforehand, the more likely the organization risks a totally opposite outcome from the one desired. Instead, the organization must look for permission from the individual, which can be met with resistance. That resistance comes from not knowing how the information will be used, how it will be shared with others, and not receiving enough benefit in return for granting permission. As the quote above about patient concerns and rights succinctly states, no one likes not feeling in control of the information about themselves, or the uncertainty about where it will be used. This is well understood in consumer social media (i.e. permission-based marketing) and is applicable to workforce reputation management. However, asking permission leaves open the very real possibility that no one, or so few, will grant permission, resulting in a small set of data with little usefulness for the company. Connecting Individual Motivation to Organization Needs So what is it that makes an individual decide to grant an organization access to the data it wants? It is when the individual’s own motivations are in alignment with the organization’s objectives. In the case of workforce reputation management, when the individual is motivated by a desire for increased visibility and career growth opportunities to advertise their skills and level of influence and reputation, they are aligned with the organizations’ objectives; to fill resource needs or strategically build better awareness of what skills are present in the workforce, as well as levels of influence and reputation. Individuals can see the benefit of granting access permission to the company through multiple means. One is through simple social awareness; they begin to discover that peers who are getting more career opportunities are those who are signed up for workforce reputation management. Another is where companies take the message directly to the individual; we think you would benefit from signing up with our workforce reputation management solution. Another, more strategic approach is to make reputation management part of a larger Career Development effort by the company; providing a wide set of tools to help the workforce find ways to plan and take action to achieve their career aspirations in the organization. An effective mechanism, that facilitates connecting the visibility and career growth motivations of the workforce with the larger context of the organization’s business objectives, is to use game mechanics to help individuals transform their career goals into concrete, actionable steps, such as signing up for reputation management. This works in favor of companies looking to use workforce reputation because the workforce is more apt to see how it fits into achieving their overall career goals, as well as seeing how other participation brings additional benefits.  Once an individual has signed up with reputation management, not only have they made themselves more visible within the organization and increased their career growth opportunities, they have also enabled a tool that they can use to better understand how their actions and behaviors impact their influence and reputation. Since they will be able to see their reputation and influence measurements change over time, they will gain better insight into how reputation and influence impacts their effectiveness in a role, as well as how their behaviors and skill levels in turn affect their influence and reputation. This insight can trigger much more directed, and effective, efforts by the individual to improve their ability to perform at a higher level and become more productive. The increased sense of autonomy the individual experiences, in linking the insight they gain to the actions and behavior changes they make, greatly enhances their engagement with their role as well as their career prospects within the company. Workforce reputation management takes the wide range of disparate data about the workforce being produced across various social media platforms and transforms it into accessible, relevant, and actionable information that helps the organization achieve its desired business objectives. Social media holds untapped insights about your talent, brand and business, and workforce reputation management can help unlock them. Imagine - if you could find the hidden secrets of your businesses, how much more productive and efficient would your organization be? Mark Bennett is a Director of Product Strategy at Oracle. Mark focuses on setting the strategic vision and direction for tools that help organizations understand, shape, and leverage the capabilities of their workforce to achieve business objectives, as well as help individuals work effectively to achieve their goals and navigate their own growth. His combination of a deep technical background in software design and development, coupled with a broad knowledge of business challenges and thinking in today’s globalized, rapidly changing, technology accelerated economy, has enabled him to identify and incorporate key innovations that are central to Oracle Fusion’s unique value proposition. Mark has over the course of his career been in charge of the design, development, and strategy of Talent Management products and the design and development of cutting edge software that is better equipped to handle the increasingly complex demands of users while also remaining easy to use. Follow him @mpbennett

  Read the article

• From Bluehost to WP Engine, My WordPress Story

  - by thatjeffsmith

  This is probably the longest blog post I’ve written in a LONG time. And if you’re used to coming here for the Oracle stuff, this post is not about that. It’s about my blog, and the stuff under the hood that makes it run, AKA WordPress. If you want to skip to the juicy stuff, then use these shortcuts: My Site Slowed Down How I Moved to WP Engine How WP Engine ‘Hooked’ Me Why WP Engine? I started thatJeffSmith.com on May 28th, 2010. I had been already been blogging for several years, but a couple of really smart people I respected (Andy, Brent – thanks again!) suggested that I take ownership of my content and begin building my personal brand. I thought that was a good idea, and so I signed up for service with bluehost. Bluehost makes setting up a WordPress site very, very easy. And, they continued to be easy to work with for the past 2 years. I would even recommend them to anyone looking to host their own WordPress install/site. For $83.40, I purchased a year’s worth of service and my domain name registration – a very good value. And then last year I paid $107.40 for another year’s services. And when that year expired I paid another $190.80 for an additional two year’s service in advance. I had been up to that point, getting my money’s worth. And then, just a few weeks ago… My Site Slowed to a Crawl That spike was from an April Fool's Day Post, I think Why? Well, when I first started blogging, I had the same problem that most beginner bloggers have – not many readers. In my first year of blogging, I think the highest number of readers on a single day was about 125. I remember that day as I was very excited to break 100! Bluehost was very reliable, serving up my content with maybe a total of 3-4 outages in the past 2 years. Support was usually very prompt with answers and solutions, and I love their ‘Chat now’ technology – much nicer than message boards only or pay-to-talk phone support. In the past 6 months however, I noticed a couple of things: daily traffic was increasing – woohoo! my service was experiencing severe CPU throttling – doh! To be honest, I wasn’t aware the throttling was occuring, but I did know that the response time of my blog was starting to lag. Average load times were approaching 20-30 seconds. Not good when good sites are loading in 5 seconds or less. And just this past week, in getting ready to launch a new website for work that sucked in an RSS feed from my blog, the new page was left waiting for more than a minute. Not good! In fact my boss asked, why aren’t you blogging on Blogger? Ugh. I tried a few things to fix the problem: I paid for a premium WordPress theme – Themify’s Grido (thanks to @SQLRockstar for the heads-up) I installed a couple of WP caching plugins I read every WP optimization blog post I could get my greedy little eyes on However, at the same time I was also getting addicted to WordPress bloggers talking about all the cool things you could do with your blog. As a result I had at one point about 30 different plugins installed. WordPress runs on MySQL, and certain queries running via these plugins were starving for CPU. Plugins that would be called every page load meant that as more people clicked on my site, the more CPU I needed. I’m not stupid, so I eventually figured out that maybe less plugins was better, and was able to go down to just 20. But still, the site was running like a dog. CPU Throttling, makes MySQL wait to run a query Bluehost runs shared servers. Your site runs on the same box that several hundred (or thousand?) other services are running on. If you take more CPU than they think you should have, they will limit your service by making you stand in line for CPU, AKA ‘throttling.’ This is not bad. This business model allows them to serve many, many users for a very fair price. It works great until, well, until it doesn’t. I noticed in the last week that for every minute of service, I was being throttled between 60 and 300 seconds. If there were 5 MySQL processes running, then every single one of them were being held in check. The blog visitor notice this as their page requests would take a minute or more to be answered. Bluehost unfortunately doesn’t offer dedicated server hosting, so there was no real upgrade path for me follow and remain one of their customers. So what was I to do? Uninstall every plugin and hope the site sped up? Ask for people to take turns on my blog? I decided to spend my way out of the problem. I signed up for service with WP Engine and moved ThatJeffSmith.com The first 2 months are free, and after that it’s about $29/month to run my site on their system. My math tells me that’s a good bit more expensive than what Bluehost was charging me – to the tune of about 300% more a month. Oh, and I should just say that my blog is a personal blog even though I talk about work stuff here. I don’t get paid for blogging, I don’t sell ads, and I don’t expense the service fees – this is my personal passion. So is it worth it? In the first 4 days, it seems to be totally worth it. Load times have gone from 20-30 seconds to less than 5 seconds. A few folks have told me via Twitter that they notice faster page loads. I anticipate this will indirectly lead to more traffic as Google penalizes you in search results if your site is too slow, and of course some folks won’t even bother waiting more than 5-10 seconds. I noticed right away that writing posts, uploading pictures, and just using the WordPress dashboard in general was much more responsive. So writing is less of a chore now, which means I won’t have a good reason not to write How I Moved to WP Engine I signed up for the service and registered my domain. I then took a full export of my ‘old’ site by doing a FTP GET of all my files, then did a MySQL database backup, exported my WordPress Theme settings to a .zip file, and then finally used the WordPress ‘Export’ feature. I then used the WordPress ‘Import’ on the new site to load up my posts. Then I uploaded the theme .zip package from Themify. Then I FTP’d the ‘wp-content’ directory up to my new server using SFTP (WP Engine only supports secure FTP – good on them!) Using a temporary URL to see my new site, I was able to confirm that everything looked mostly OK – I’ll detail the challenges and issues of fixing the content next – but then it was time to ‘flip the switch.’ I updated the IP address that the DNS lookup tables use to route traffic to my new server. In a matter of minutes the DNS servers around the world were updated and it was time to see the new site! But It Was ‘Broken’ I had never moved a website before, and in my rush to update the DNS, I had changed the records without really finding out what I was supposed to do first. After re-reading the directions provided by WP Engine and following the guidance of their support engineer, I realized I had needed to set the CNAME (Alias) ‘www’ record to point to a different URL than the ‘www.thatjeffsmith.com’ entry I had set. Once corrected the site was up and running in less than a minute. Then It Was Only Mostly Broken Many of my plugins weren’t working. Apparently just ftp’ing the wp-content directory up wasn’t the proper way to re-install the plugin. I suspect file permissions or file ownership wasn’t proper. Some plug-ins were working, many had their settings wiped to the defaults, and a few just didn’t work again. I had to delete the directory of the plug-in manually via SFTP, and then use the WP Dashboard to install it from scratch. And here was my first ‘lesson’ – don’t switch the DNS records until you’ve completely tested your new site. I wasn’t able to navigate the old WP console to review my plug-in settings. Thankfully I was able to use the Wayback Machine to reverse engineer some things, and of course most plug-ins aren’t that complicated to setup to begin with. An example of one that I had to redo from scratch is the ‘Twitter @Anywhere Plus’ plugin that I use to create the form that allows folks to tweet a post they enjoyed at the end of each story. How WP Engine ‘Hooked’ Me I actually signed up with another provider first. They ranked highly in Google searches and a few Tweeps recommended them to me. But hours after signing up and I still didn’t have sever reyady, I was ready to give up on them. They offered no chat or phone support – only mail and message boards. And the message boards were rife with posts about how the service had gone downhill in the past 6 months. To their credit, they did make it easy to cancel, although I did have to do so via email as their website ‘cancel’ button was non-existent. Within minutes of activating my WP Engine account I had received my welcome message and directions on how to get started. I was able to see my staged website right away. They also did something very cool before I even got started – they looked at my existing site and told me by how much they could improve its performance. The proof is in the web pudding. I like this for a few reasons, but primarily I liked their business model. It told me they knew what they were doing, and that they were willing to put their money where their mouth was. This was further evident by their 60-day money back guarantee. And if I understand it correctly, they don’t even take your money until after that 60 day period is over. After a day, I was welcomed by the WP Engine social media team, and was given the opportunity to subscribe to their newsletter and follow their account on Twitter. I noticed their Twitter team is sure to post regular WordPress tips several times a day. It’s not just an account that’s setup for the sake of having a Twitter presence. These little things add up and give me confidence in my decision to choose them as my hosting partner. ‘Partner’ – that’s a lot nicer word than just ‘service provider,’ isn’t it? Oh, and they offered me a t-shirt. Don’t ever doubt the power of a ‘free’ t-shirt! How awesome is this e-mail, from a customer perspective? I wasn’t really expecting any of this. Exceeding expectations before I have even handed over a single dollar seems like a pretty good business plan. This is how you treat customers. Love them to death, and they reward you with loyalty. But Jeff, You Skipped a Piece Here, Why WP Engine? I found them on one of those ‘Top 10′ list posts, and pulled up their webpage. I noticed they offered a specialized service – they host WordPress installs, and that’s it. Their servers are tuned specifically for running WordPress. They had in bolded text, things like ‘INSANELY FAST. INFINITELY SCALABLE.’ and ‘LIGHTNING SPEED.’ And then they offered insurance against hackers and they took care of automatic backups and restores. The only drawbacks I have noticed so far relate to plugins I used that have been ‘blacklisted.’ In order to guarantee that ‘lightning’ speed, they have banned the use of the CPU-suckiest plugins. One of those is the ‘Related Posts’ plugin. So if you are a subscriber and are reading this in your email, you’ll notice there’s no links back to my blog to continue reading other related stories. Since that referral traffic is very small single-digit for my site, I decided that I’m OK with that. I’d rather have the warp-speed page loads. Again, I think that will lead to higher traffic down the road. In 50+ days I will need to decide if WP Engine is a permanent solution. I’ll be sure to update this post when that time comes and let y’all know how it turns out.

  Read the article

• C#/.NET Little Wonders: ConcurrentBag and BlockingCollection

  - by James Michael Hare

  In the first week of concurrent collections, began with a general introduction and discussed the ConcurrentStack<T> and ConcurrentQueue<T>.  The last post discussed the ConcurrentDictionary<T> .  Finally this week, we shall close with a discussion of the ConcurrentBag<T> and BlockingCollection<T>. For more of the "Little Wonders" posts, see C#/.NET Little Wonders: A Redux. Recap As you'll recall from the previous posts, the original collections were object-based containers that accomplished synchronization through a Synchronized member.  With the advent of .NET 2.0, the original collections were succeeded by the generic collections which are fully type-safe, but eschew automatic synchronization.  With .NET 4.0, a new breed of collections was born in the System.Collections.Concurrent namespace.  Of these, the final concurrent collection we will examine is the ConcurrentBag and a very useful wrapper class called the BlockingCollection. For some excellent information on the performance of the concurrent collections and how they perform compared to a traditional brute-force locking strategy, see this informative whitepaper by the Microsoft Parallel Computing Platform team here. ConcurrentBag<T> – Thread-safe unordered collection. Unlike the other concurrent collections, the ConcurrentBag<T> has no non-concurrent counterpart in the .NET collections libraries.  Items can be added and removed from a bag just like any other collection, but unlike the other collections, the items are not maintained in any order.  This makes the bag handy for those cases when all you care about is that the data be consumed eventually, without regard for order of consumption or even fairness – that is, it’s possible new items could be consumed before older items given the right circumstances for a period of time. So why would you ever want a container that can be unfair?  Well, to look at it another way, you can use a ConcurrentQueue and get the fairness, but it comes at a cost in that the ordering rules and synchronization required to maintain that ordering can affect scalability a bit.  Thus sometimes the bag is great when you want the fastest way to get the next item to process, and don’t care what item it is or how long its been waiting. The way that the ConcurrentBag works is to take advantage of the new ThreadLocal<T> type (new in System.Threading for .NET 4.0) so that each thread using the bag has a list local to just that thread.  This means that adding or removing to a thread-local list requires very low synchronization.  The problem comes in where a thread goes to consume an item but it’s local list is empty.  In this case the bag performs “work-stealing” where it will rob an item from another thread that has items in its list.  This requires a higher level of synchronization which adds a bit of overhead to the take operation. So, as you can imagine, this makes the ConcurrentBag good for situations where each thread both produces and consumes items from the bag, but it would be less-than-idea in situations where some threads are dedicated producers and the other threads are dedicated consumers because the work-stealing synchronization would outweigh the thread-local optimization for a thread taking its own items. Like the other concurrent collections, there are some curiosities to keep in mind: IsEmpty(), Count, ToArray(), and GetEnumerator() lock collection Each of these needs to take a snapshot of whole bag to determine if empty, thus they tend to be more expensive and cause Add() and Take() operations to block. ToArray() and GetEnumerator() are static snapshots Because it is based on a snapshot, will not show subsequent updates after snapshot. Add() is lightweight Since adding to the thread-local list, there is very little overhead on Add. TryTake() is lightweight if items in thread-local list As long as items are in the thread-local list, TryTake() is very lightweight, much more so than ConcurrentStack() and ConcurrentQueue(), however if the local thread list is empty, it must steal work from another thread, which is more expensive. Remember, a bag is not ideal for all situations, it is mainly ideal for situations where a process consumes an item and either decomposes it into more items to be processed, or handles the item partially and places it back to be processed again until some point when it will complete.  The main point is that the bag works best when each thread both takes and adds items. For example, we could create a totally contrived example where perhaps we want to see the largest power of a number before it crosses a certain threshold.  Yes, obviously we could easily do this with a log function, but bare with me while I use this contrived example for simplicity. So let’s say we have a work function that will take a Tuple out of a bag, this Tuple will contain two ints.  The first int is the original number, and the second int is the last multiple of that number.  So we could load our bag with the initial values (let’s say we want to know the last multiple of each of 2, 3, 5, and 7 under 100. 1: var bag = new ConcurrentBag<Tuple<int, int>> 2: { 3: Tuple.Create(2, 1), 4: Tuple.Create(3, 1), 5: Tuple.Create(5, 1), 6: Tuple.Create(7, 1) 7: }; Then we can create a method that given the bag, will take out an item, apply the multiplier again, 1: public static void FindHighestPowerUnder(ConcurrentBag<Tuple<int,int>> bag, int threshold) 2: { 3: Tuple<int,int> pair; 4:  5: // while there are items to take, this will prefer local first, then steal if no local 6: while (bag.TryTake(out pair)) 7: { 8: // look at next power 9: var result = Math.Pow(pair.Item1, pair.Item2 + 1); 10:  11: if (result < threshold) 12: { 13: // if smaller than threshold bump power by 1 14: bag.Add(Tuple.Create(pair.Item1, pair.Item2 + 1)); 15: } 16: else 17: { 18: // otherwise, we're done 19: Console.WriteLine("Highest power of {0} under {3} is {0}^{1} = {2}.", 20: pair.Item1, pair.Item2, Math.Pow(pair.Item1, pair.Item2), threshold); 21: } 22: } 23: } Now that we have this, we can load up this method as an Action into our Tasks and run it: 1: // create array of tasks, start all, wait for all 2: var tasks = new[] 3: { 4: new Task(() => FindHighestPowerUnder(bag, 100)), 5: new Task(() => FindHighestPowerUnder(bag, 100)), 6: }; 7:  8: Array.ForEach(tasks, t => t.Start()); 9:  10: Task.WaitAll(tasks); Totally contrived, I know, but keep in mind the main point!  When you have a thread or task that operates on an item, and then puts it back for further consumption – or decomposes an item into further sub-items to be processed – you should consider a ConcurrentBag as the thread-local lists will allow for quick processing.  However, if you need ordering or if your processes are dedicated producers or consumers, this collection is not ideal.  As with anything, you should performance test as your mileage will vary depending on your situation! BlockingCollection<T> – A producers & consumers pattern collection The BlockingCollection<T> can be treated like a collection in its own right, but in reality it adds a producers and consumers paradigm to any collection that implements the interface IProducerConsumerCollection<T>.  If you don’t specify one at the time of construction, it will use a ConcurrentQueue<T> as its underlying store. If you don’t want to use the ConcurrentQueue, the ConcurrentStack and ConcurrentBag also implement the interface (though ConcurrentDictionary does not).  In addition, you are of course free to create your own implementation of the interface. So, for those who don’t remember the producers and consumers classical computer-science problem, the gist of it is that you have one (or more) processes that are creating items (producers) and one (or more) processes that are consuming these items (consumers).  Now, the crux of the problem is that there is a bin (queue) where the produced items are placed, and typically that bin has a limited size.  Thus if a producer creates an item, but there is no space to store it, it must wait until an item is consumed.  Also if a consumer goes to consume an item and none exists, it must wait until an item is produced. The BlockingCollection makes it trivial to implement any standard producers/consumers process set by providing that “bin” where the items can be produced into and consumed from with the appropriate blocking operations.  In addition, you can specify whether the bin should have a limited size or can be (theoretically) unbounded, and you can specify timeouts on the blocking operations. As far as your choice of “bin”, for the most part the ConcurrentQueue is the right choice because it is fairly light and maximizes fairness by ordering items so that they are consumed in the same order they are produced.  You can use the concurrent bag or stack, of course, but your ordering would be random-ish in the case of the former and LIFO in the case of the latter. So let’s look at some of the methods of note in BlockingCollection: BoundedCapacity returns capacity of the “bin” If the bin is unbounded, the capacity is int.MaxValue. Count returns an internally-kept count of items This makes it O(1), but if you modify underlying collection directly (not recommended) it is unreliable. CompleteAdding() is used to cut off further adds. This sets IsAddingCompleted and begins to wind down consumers once empty. IsAddingCompleted is true when producers are “done”. Once you are done producing, should complete the add process to alert consumers. IsCompleted is true when producers are “done” and “bin” is empty. Once you mark the producers done, and all items removed, this will be true. Add() is a blocking add to collection. If bin is full, will wait till space frees up Take() is a blocking remove from collection. If bin is empty, will wait until item is produced or adding is completed. GetConsumingEnumerable() is used to iterate and consume items. Unlike the standard enumerator, this one consumes the items instead of iteration. TryAdd() attempts add but does not block completely If adding would block, returns false instead, can specify TimeSpan to wait before stopping. TryTake() attempts to take but does not block completely Like TryAdd(), if taking would block, returns false instead, can specify TimeSpan to wait. Note the use of CompleteAdding() to signal the BlockingCollection that nothing else should be added.  This means that any attempts to TryAdd() or Add() after marked completed will throw an InvalidOperationException.  In addition, once adding is complete you can still continue to TryTake() and Take() until the bin is empty, and then Take() will throw the InvalidOperationException and TryTake() will return false. So let’s create a simple program to try this out.  Let’s say that you have one process that will be producing items, but a slower consumer process that handles them.  This gives us a chance to peek inside what happens when the bin is bounded (by default, the bin is NOT bounded). 1: var bin = new BlockingCollection<int>(5); Now, we create a method to produce items: 1: public static void ProduceItems(BlockingCollection<int> bin, int numToProduce) 2: { 3: for (int i = 0; i < numToProduce; i++) 4: { 5: // try for 10 ms to add an item 6: while (!bin.TryAdd(i, TimeSpan.FromMilliseconds(10))) 7: { 8: Console.WriteLine("Bin is full, retrying..."); 9: } 10: } 11:  12: // once done producing, call CompleteAdding() 13: Console.WriteLine("Adding is completed."); 14: bin.CompleteAdding(); 15: } And one to consume them: 1: public static void ConsumeItems(BlockingCollection<int> bin) 2: { 3: // This will only be true if CompleteAdding() was called AND the bin is empty. 4: while (!bin.IsCompleted) 5: { 6: int item; 7:  8: if (!bin.TryTake(out item, TimeSpan.FromMilliseconds(10))) 9: { 10: Console.WriteLine("Bin is empty, retrying..."); 11: } 12: else 13: { 14: Console.WriteLine("Consuming item {0}.", item); 15: Thread.Sleep(TimeSpan.FromMilliseconds(20)); 16: } 17: } 18: } Then we can fire them off: 1: // create one producer and two consumers 2: var tasks = new[] 3: { 4: new Task(() => ProduceItems(bin, 20)), 5: new Task(() => ConsumeItems(bin)), 6: new Task(() => ConsumeItems(bin)), 7: }; 8:  9: Array.ForEach(tasks, t => t.Start()); 10:  11: Task.WaitAll(tasks); Notice that the producer is faster than the consumer, thus it should be hitting a full bin often and displaying the message after it times out on TryAdd(). 1: Consuming item 0. 2: Consuming item 1. 3: Bin is full, retrying... 4: Bin is full, retrying... 5: Consuming item 3. 6: Consuming item 2. 7: Bin is full, retrying... 8: Consuming item 4. 9: Consuming item 5. 10: Bin is full, retrying... 11: Consuming item 6. 12: Consuming item 7. 13: Bin is full, retrying... 14: Consuming item 8. 15: Consuming item 9. 16: Bin is full, retrying... 17: Consuming item 10. 18: Consuming item 11. 19: Bin is full, retrying... 20: Consuming item 12. 21: Consuming item 13. 22: Bin is full, retrying... 23: Bin is full, retrying... 24: Consuming item 14. 25: Adding is completed. 26: Consuming item 15. 27: Consuming item 16. 28: Consuming item 17. 29: Consuming item 19. 30: Consuming item 18. Also notice that once CompleteAdding() is called and the bin is empty, the IsCompleted property returns true, and the consumers will exit. Summary The ConcurrentBag is an interesting collection that can be used to optimize concurrency scenarios where tasks or threads both produce and consume items.  In this way, it will choose to consume its own work if available, and then steal if not.  However, in situations where you want fair consumption or ordering, or in situations where the producers and consumers are distinct processes, the bag is not optimal. The BlockingCollection is a great wrapper around all of the concurrent queue, stack, and bag that allows you to add producer and consumer semantics easily including waiting when the bin is full or empty. That’s the end of my dive into the concurrent collections.  I’d also strongly recommend, once again, you read this excellent Microsoft white paper that goes into much greater detail on the efficiencies you can gain using these collections judiciously (here). Tweet Technorati Tags: C#,.NET,Concurrent Collections,Little Wonders

  Read the article

< Previous Page | 34 35 36 37 38 39  | Next Page >