Search Results

Search found 1649 results on 66 pages for 'packet mangling'.

Page 38/66 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• Router recommendation to virtualize 800 IPs

  - by delerious010

  I've recently been looking at getting some new load balancers for our environment as we are expecting to double our client base in the next 12 months. Currently we have 400 public IPS serving 800 clusters ( 2 clusters / IP due to ports ) on Coyote Point Balancers, and distributing connections to 3 web servers serving about 6GBytes outgoing, 2Gbytes in per day. If we double, this would be about 800 IPs, possibly 1600 clusters, and about 6 servers per cluster ( for a total of 9600 so called "real servers" using Barracuda's lingo ). Due to the amount of clusters, most solutions I've looked at ( Coyote, Barracuda, Loadbalancer.org ) seem to be unsure whether they'll be able to handle our planned growth, mostly due to health checks performed on the servers ... which makes total sense when you think of it. So the fine folk at loadbalancer.org recommended that we may be better off offload the 400-800 public IPs, which we require for SSL eCommerce solutions, over to a forward facing router. From that point on, the router could do some mangling to route EXT_IP:443 to INT_IP:INT_PORT which would then allow us to reduce the Load Balancer configuration to 1 or 2 clusters, thus resolving the health check problem. Does this idea make sense to yall ? Or would you have other recommendations to make ? Secondly, what router would you recommend for such an undertaking ? I'd be looking at something that has some form of failover mechanism built in. On a totally unrelated note, I've got to admit that I'm extremely pleased with the responses I got from loadbalancer.org. Their responses to my inquiries were surprisingly helpful ( i.e. I didn't feel as if I was taking to a sales guy trying to push something ). ( No I don't work for them, and sadly nor are they sending me free gear ).

  Read the article

• TCP stops sending weirdly.

  - by Utoah

  In case to find out the cause of TCP retransmits on my Linux (RHEL, kernel 2.6.18) servers connecting to the same switch. I had a client-server pair send "Hello" to each other every 200us and captured the packets with tcpdump on the client machine. The command I used to mimic client and server are: while [ 0 ]; do echo "Hello"; usleep 200; done | nc server 18510 while [ 0 ]; do echo "Hello"; usleep 200; done | nc -l 18510 When the server machine was busy serving some other requests, the client suffered from abrupt retransmits occasionally. But the output of tcpdump seemed irrational. 16:04:58.898970 IP server.18510 > client.34533: P 4531:4537(6) ack 3204 win 123 <nop,nop,timestamp 1923778643 3452833828> 16:04:58.901797 IP client.34533 > server.18510: P 3204:3210(6) ack 4537 win 33 <nop,nop,timestamp 3452833831 1923778643> 16:04:58.901855 IP server.18510 > client.34533: P 4537:4549(12) ack 3210 win 123 <nop,nop,timestamp 1923778646 3452833831> 16:04:58.903871 IP client.34533 > server.18510: P 3210:3216(6) ack 4549 win 33 <nop,nop,timestamp 3452833833 1923778646> 16:04:58.903950 IP server.18510 > client.34533: P 4549:4555(6) ack 3216 win 123 <nop,nop,timestamp 1923778648 3452833833> 16:04:58.905796 IP client.34533 > server.18510: P 3216:3222(6) ack 4555 win 33 <nop,nop,timestamp 3452833835 1923778648> 16:04:58.905860 IP server.18510 > client.34533: P 4555:4561(6) ack 3222 win 123 <nop,nop,timestamp 1923778650 3452833835> 16:04:58.908903 IP client.34533 > server.18510: P 3222:3228(6) ack 4561 win 33 <nop,nop,timestamp 3452833838 1923778650> 16:04:58.908966 IP server.18510 > client.34533: P 4561:4567(6) ack 3228 win 123 <nop,nop,timestamp 1923778653 3452833838> 16:04:58.911855 IP client.34533 > server.18510: P 3228:3234(6) ack 4567 win 33 <nop,nop,timestamp 3452833841 1923778653> 16:04:59.112573 IP client.34533 > server.18510: P 3228:3234(6) ack 4567 win 33 <nop,nop,timestamp 3452834042 1923778653> 16:04:59.112648 IP server.18510 > client.34533: P 4567:5161(594) ack 3234 win 123 <nop,nop,timestamp 1923778857 3452834042> 16:04:59.112659 IP client.34533 > server.18510: P 3234:3672(438) ack 5161 win 35 <nop,nop,timestamp 3452834042 1923778857> 16:04:59.114427 IP server.18510 > client.34533: P 5161:5167(6) ack 3672 win 126 <nop,nop,timestamp 1923778858 3452834042> 16:04:59.114439 IP client.34533 > server.18510: P 3672:3678(6) ack 5167 win 35 <nop,nop,timestamp 3452834044 1923778858> 16:04:59.116435 IP server.18510 > client.34533: P 5167:5173(6) ack 3678 win 126 <nop,nop,timestamp 1923778860 3452834044> 16:04:59.116444 IP client.34533 > server.18510: P 3678:3684(6) ack 5173 win 35 <nop,nop,timestamp 3452834046 1923778860> Packet 3228:3234(6) from client was retransmitted due to ack timeout. What I could not understand was that the client machine did not send out any packets after the first 3228:3234(6) packets was sent. The server machine had advertised a window (scaled) large enough. The data transfer up to the retransmit was fine which meant no slow start should be in action. What can cause the client machine to stop sending until the packet timed out? BTW, I am unable to run tcpdump on the server machine.

  Read the article

• Outlook Signature Broken in Entourage

  - by Eric J.

  Some of our company uses Windows with Outlook 2010, and the rest use Mac with Entourage. When our standard signature line is included in an email that goes to Entourage, the result does not display correctly. It appears that Entourage is mangling the HTML. My working theory is that Entourage encounters inline CSS styles it does not know about and stops processing styles, but I'm really not sure. Question: How can I enter a signature into Outlook 2010 that will render correctly in Entourage? For example, can I specify somehow the exact HTML to use? Here's an example of how the HTML is being changed. Original on Outlook, as received by another Outlook client: <span style='font-size:9.0pt;font-family:"Century Gothic","sans-serif"; color:#1785C5'>My Company<br> </span></b><span class=apple-style-span><span style='font-size:9.0pt; font-family:"Century Gothic","sans-serif";color:#666666'>123 Main St.</span></span><span class=apple-style-span><span style='font-size:9.0pt;font-family:"Century Gothic","sans-serif"; color:#AFAFAF'>&nbsp;</span></span><span class=apple-style-span><span style='font-size:9.0pt;font-family:"Century Gothic","sans-serif";color:#666666'>Suite 100</span></span> Note the use of spans, color #1785C5 and color #666666. Same original email, as displayed in an Entourage client: <span style='font-size:9.0pt;font-family:"Century Gothic","sans-serif"; mso-fareast-font-family:"Times New Roman"'><br> <span style='color:#656565'>My Company<br> 123 Main St Suite 100<br> </span> Note the use of br tags rather than spans, and the color #656565.

  Read the article

• How can the route between two private IPs go via public IPs?

  - by Gilles

  I'm trying to understand what this output from traceroute means. I changed the IP addresses for privacy but retained the public/private IP range distinction. traceroute.db -e -n 10.1.1.9 traceroute to (10.1.1.9), 30 hops max, 60 byte packets 1 10.0.0.1 0.596 ms 0.588 ms 0.577 ms 2 10.0.0.2 1.032 ms 1.029 ms 1.084 ms 3 10.0.0.3 3.360 ms 3.355 ms 3.338 ms 4 23.0.0.4 3.974 ms 4.592 ms 4.584 ms 5 23.0.0.5 13.442 ms 13.445 ms 13.434 ms 6 45.0.0.6 13.195 ms 12.924 ms 12.913 ms 7 67.0.0.7 52.088 ms 51.683 ms 52.040 ms 8 10.1.1.8 46.878 ms 44.575 ms 44.815 ms 9 10.1.1.9 45.932 ms 45.603 ms 45.593 ms The first 10.0.* range is inside my organisation. The last 10.1.* range is another site of my organisation. The intermediate addresses belong to various ISPs. I expect that there is some kind of VPN between the two sites, but I don't know much about our network topology. What I don't understand is how the route can go from a private address through public addresses back into private addresses. Searching led me to Public IPs on MPLS Traceroute, which gives a possible explanation: MPLS. Is MPLS the only possible or most likely explanation? Otherwise what does this tell me about our network infrastructure? Bonus question for my edification: in this scenario, who is generating the ICMP TTL exceeded packets and if relevant mangling their source and destination addresses?

  Read the article

• Web Browser Control &ndash; Specifying the IE Version

  - by Rick Strahl

  I use the Internet Explorer Web Browser Control in a lot of my applications to display document type layout. HTML happens to be one of the most common document formats and displaying data in this format – even in desktop applications, is often way easier than using normal desktop technologies. One issue the Web Browser Control has that it’s perpetually stuck in IE 7 rendering mode by default. Even though IE 8 and now 9 have significantly upgraded the IE rendering engine to be more CSS and HTML compliant by default the Web Browser control will have none of it. IE 9 in particular – with its much improved CSS support and basic HTML 5 support is a big improvement and even though the IE control uses some of IE’s internal rendering technology it’s still stuck in the old IE 7 rendering by default. This applies whether you’re using the Web Browser control in a WPF application, a WinForms app, a FoxPro or VB classic application using the ActiveX control. Behind the scenes all these UI platforms use the COM interfaces and so you’re stuck by those same rules. Rendering Challenged To see what I’m talking about here are two screen shots rendering an HTML 5 doctype page that includes some CSS 3 functionality – rounded corners and border shadows - from an earlier post. One uses IE 9 as a standalone browser, and one uses a simple WPF form that includes the Web Browser control. IE 9 Browser:   Web Browser control in a WPF form: The IE 9 page displays this HTML correctly – you see the rounded corners and shadow displayed. Obviously the latter rendering using the Web Browser control in a WPF application is a bit lacking. Not only are the new CSS features missing but the page also renders in Internet Explorer’s quirks mode so all the margins, padding etc. behave differently by default, even though there’s a CSS reset applied on this page. If you’re building an application that intends to use the Web Browser control for a live preview of some HTML this is clearly undesirable. Feature Delegation via Registry Hacks Fortunately starting with Internet Explore 8 and later there’s a fix for this problem via a registry setting. You can specify a registry key to specify which rendering mode and version of IE should be used by that application. These are not global mind you – they have to be enabled for each application individually. There are two different sets of keys for 32 bit and 64 bit applications. 32 bit: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: yourapplication.exe 64 bit: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: yourapplication.exe The value to set this key to is (taken from MSDN here) as decimal values: 9999 (0x270F) Internet Explorer 9. Webpages are displayed in IE9 Standards mode, regardless of the !DOCTYPE directive. 9000 (0x2328) Internet Explorer 9. Webpages containing standards-based !DOCTYPE directives are displayed in IE9 mode. 8888 (0x22B8) Webpages are displayed in IE8 Standards mode, regardless of the !DOCTYPE directive. 8000 (0x1F40) Webpages containing standards-based !DOCTYPE directives are displayed in IE8 mode. 7000 (0x1B58) Webpages containing standards-based !DOCTYPE directives are displayed in IE7 Standards mode.   The added key looks something like this in the Registry Editor: With this in place my Html Html Help Builder application which has wwhelp.exe as its main executable now works with HTML 5 and CSS 3 documents in the same way that Internet Explorer 9 does. Incidentally I accidentally added an ‘empty’ DWORD value of 0 to my EXE name and that worked as well giving me IE 9 rendering. Although not documented I suspect 0 (or an invalid value) will default to the installed browser. Don’t have a good way to test this but if somebody could try this with IE 8 installed that would be great: What happens when setting 9000 with IE 8 installed? What happens when setting 0 with IE 8 installed? Don’t forget to add Keys for Host Environments If you’re developing your application in Visual Studio and you run the debugger you may find that your application is still not rendering right, but if you run the actual generated EXE from Explorer or the OS command prompt it works. That’s because when you run the debugger in Visual Studio it wraps your application into a debugging host container. For this reason you might want to also add another registry key for yourapp.vshost.exe on your development machine. If you’re developing in Visual FoxPro make sure you add a key for vfp9.exe to see the rendering adjustments in the Visual FoxPro development environment. Cleaner HTML - no more HTML mangling! There are a number of additional benefits to setting up rendering of the Web Browser control to the IE 9 engine (or even the IE 8 engine) beyond the obvious rendering functionality. IE 9 actually returns your HTML in something that resembles the original HTML formatting, as opposed to the IE 7 default format which mangled the original HTML content. If you do the following in the WPF application: private void button2_Click(object sender, RoutedEventArgs e) { dynamic doc = this.webBrowser.Document; MessageBox.Show(doc.body.outerHtml); } you get different output depending on the rendering mode active. With the default IE 7 rendering you get: <BODY><DIV> <H1>Rounded Corners and Shadows - Creating Dialogs in CSS</H1> <DIV class=toolbarcontainer><A class=hoverbutton href="./"><IMG src="../../css/images/home.gif"> Home</A> <A class=hoverbutton href="RoundedCornersAndShadows.htm"><IMG src="../../css/images/refresh.gif"> Refresh</A> </DIV> <DIV class=containercontent> <FIELDSET><LEGEND>Plain Box</LEGEND><!-- Simple Box with rounded corners and shadow --> <DIV style="BORDER-BOTTOM: steelblue 2px solid; BORDER-LEFT: steelblue 2px solid; WIDTH: 550px; BORDER-TOP: steelblue 2px solid; BORDER-RIGHT: steelblue 2px solid" class="roundbox boxshadow"> <DIV style="BACKGROUND: khaki" class="boxcontenttext roundbox">Simple Rounded Corner Box. </DIV></DIV></FIELDSET> <FIELDSET><LEGEND>Box with Header</LEGEND> <DIV style="BORDER-BOTTOM: steelblue 2px solid; BORDER-LEFT: steelblue 2px solid; WIDTH: 550px; BORDER-TOP: steelblue 2px solid; BORDER-RIGHT: steelblue 2px solid" class="roundbox boxshadow"> <DIV class="gridheaderleft roundbox-top">Box with a Header</DIV> <DIV style="BACKGROUND: khaki" class="boxcontenttext roundbox-bottom">Simple Rounded Corner Box. </DIV></DIV></FIELDSET> <FIELDSET><LEGEND>Dialog Style Window</LEGEND> <DIV style="POSITION: relative; WIDTH: 450px" id=divDialog class="dialog boxshadow" jQuery16107208195684204002="2"> <DIV style="POSITION: relative" class=dialog-header> <DIV class=closebox></DIV>User Sign-in <DIV class=closebox jQuery16107208195684204002="3"></DIV></DIV> <DIV class=descriptionheader>This dialog is draggable and closable</DIV> <DIV class=dialog-content><LABEL>Username:</LABEL> <INPUT name=txtUsername value=" "> <LABEL>Password</LABEL> <INPUT name=txtPassword value=" "> <HR> <INPUT id=btnLogin value=Login type=button> </DIV> <DIV class=dialog-statusbar>Ready</DIV></DIV></FIELDSET> </DIV> <SCRIPT type=text/javascript>     $(document).ready(function () {         $("#divDialog")             .draggable({ handle: ".dialog-header" })             .closable({ handle: ".dialog-header",                 closeHandler: function () {                     alert("Window about to be closed.");                     return true;  // true closes - false leaves open                 }             });     }); </SCRIPT> </DIV></BODY> Now lest you think I’m out of my mind and create complete whacky HTML rooted in the last century, here’s the IE 9 rendering mode output which looks a heck of a lot cleaner and a lot closer to my original HTML of the page I’m accessing: <body> <div>         <h1>Rounded Corners and Shadows - Creating Dialogs in CSS</h1>     <div class="toolbarcontainer">         <a class="hoverbutton" href="./"> <img src="../../css/images/home.gif"> Home</a>         <a class="hoverbutton" href="RoundedCornersAndShadows.htm"> <img src="../../css/images/refresh.gif"> Refresh</a>     </div>         <div class="containercontent">     <fieldset>         <legend>Plain Box</legend>                <!-- Simple Box with rounded corners and shadow -->             <div style="border: 2px solid steelblue; width: 550px;" class="roundbox boxshadow">                              <div style="background: khaki;" class="boxcontenttext roundbox">                     Simple Rounded Corner Box.                 </div>             </div>     </fieldset>     <fieldset>         <legend>Box with Header</legend>         <div style="border: 2px solid steelblue; width: 550px;" class="roundbox boxshadow">                          <div class="gridheaderleft roundbox-top">Box with a Header</div>             <div style="background: khaki;" class="boxcontenttext roundbox-bottom">                 Simple Rounded Corner Box.             </div>         </div>     </fieldset>       <fieldset>         <legend>Dialog Style Window</legend>         <div style="width: 450px; position: relative;" id="divDialog" class="dialog boxshadow">             <div style="position: relative;" class="dialog-header">                 <div class="closebox"></div>                 User Sign-in             <div class="closebox"></div></div>             <div class="descriptionheader">This dialog is draggable and closable</div>                    <div class="dialog-content">                             <label>Username:</label>                 <input name="txtUsername" value=" " type="text">                 <label>Password</label>                 <input name="txtPassword" value=" " type="text">                                 <hr/>                                 <input id="btnLogin" value="Login" type="button">                        </div>             <div class="dialog-statusbar">Ready</div>         </div>     </fieldset>     </div> <script type="text/javascript">     $(document).ready(function () {         $("#divDialog")             .draggable({ handle: ".dialog-header" })             .closable({ handle: ".dialog-header",                 closeHandler: function () {                     alert("Window about to be closed.");                     return true;  // true closes - false leaves open                 }             });     }); </script>        </div> </body> IOW, in IE9 rendering mode IE9 is much closer (but not identical) to the original HTML from the page on the Web that we’re reading from. As a side note: Unfortunately, the browser feature emulation can't be applied against the Html Help (CHM) Engine in Windows which uses the Web Browser control (or COM interfaces anyway) to render Html Help content. I tried setting up hh.exe which is the help viewer, to use IE 9 rendering but a help file generated with CSS3 features will simply show in IE 7 mode. Bummer - this would have been a nice quick fix to allow help content served from CHM files to look better. HTML Editing leaves HTML formatting intact In the same vane, if you do any inline HTML editing in the control by setting content to be editable, IE 9’s control does a much more reasonable job of creating usable and somewhat valid HTML. It also leaves the original content alone other than the text your are editing or adding. No longer is the HTML output stripped of excess spaces and reformatted in IEs format. So if I do: private void button3_Click(object sender, RoutedEventArgs e) { dynamic doc = this.webBrowser.Document; doc.body.contentEditable = true; } and then make some changes to the document by typing into it using IE 9 mode, the document formatting stays intact and only the affected content is modified. The created HTML is reasonably clean (although it does lack proper XHTML formatting for things like <br/> <hr/>). This is very different from IE 7 mode which mangled the HTML as soon as the page was loaded into the control. Any editing you did stripped out all white space and lost all of your existing XHTML formatting. In IE 9 mode at least *most* of your original formatting stays intact. This is huge! In Html Help Builder I have supported HTML editing for a long time but the HTML mangling by the Web Browser control made it very difficult to edit the HTML later. Previously IE would mangle the HTML by stripping out spaces, upper casing all tags and converting many XHTML safe tags to its HTML 3 tags. Now IE leaves most of my document alone while editing, and creates cleaner and more compliant markup (with exception of self-closing elements like BR/HR). The end result is that I now have HTML editing in place that's much cleaner and actually capable of being manually edited. Caveats, Caveats, Caveats It wouldn't be Internet Explorer if there weren't some major compatibility issues involved in using this various browser version interaction. The biggest thing I ran into is that there are odd differences in some of the COM interfaces and what they return. I specifically ran into a problem with the document.selection.createRange() function which with IE 7 compatibility returns an expected text range object. When running in IE 8 or IE 9 mode however. I could not retrieve a valid text range with this code where loEdit is the WebBrowser control: loRange = loEdit.document.selection.CreateRange() The loRange object returned (here in FoxPro) had a length property of 0 but none of the other properties of the TextRange or TextRangeCollection objects were available. I figured this was due to some changed security settings but even after elevating the Intranet Security Zone and mucking with the other browser feature flags pertaining to security I had no luck. In the end I relented and used a JavaScript function in my editor document that returns a selection range object: function getselectionrange() { var range = document.selection.createRange(); return range; } and call that JavaScript function from my host applications code: *** Use a function in the document to get around HTML Editing issues loRange = loEdit.document.parentWindow.getselectionrange(.f.) and that does work correctly. This wasn't a big deal as I'm already loading a support script file into the editor page so all I had to do is add the function to this existing script file. You can find out more how to call script code in the Web Browser control from a host application in a previous post of mine. IE 8 and 9 also clamp down the security environment a little more than the default IE 7 control, so there may be other issues you run into. Other than the createRange() problem above I haven't seen anything else that is breaking in my code so far though and that's encouraging at least since it uses a lot of HTML document manipulation for the custom editor I've created (and would love to replace - any PROFESSIONAL alternatives anybody?) Registry Key Installation for your Application It’s important to remember that this registry setting is made per application, so most likely this is something you want to set up with your installer. Also remember that 32 and 64 bit settings require separate settings in the registry so if you’re creating your installer you most likely will want to set both keys in the registry preemptively for your application. I use Tarma Installer for all of my application installs and in Tarma I configure registry keys for both and set a flag to only install the latter key group in the 64 bit version: Because this setting is application specific you have to do this for every application you install unfortunately, but this also means that you can safely configure this setting in the registry because it is after only applied to your application. Another problem with install based installation is version detection. If IE 8 is installed I’d want 8000 for the value, if IE 9 is installed I want 9000. I can do this easily in code but in the installer this is much more difficult. I don’t have a good solution for this at the moment, but given that the app works with IE 7 mode now, IE 9 mode is just a bonus for the moment. If IE 9 is not installed and 9000 is used the default rendering will remain in use.   It sure would be nice if we could specify the IE rendering mode as a property, but I suspect the ActiveX container has to know before it loads what actual version to load up and once loaded can only load a single version of IE. This would account for this annoying application level configuration… Summary The registry feature emulation has been available for quite some time, but I just found out about it today and started experimenting around with it. I’m stoked to see that this is available as I’d pretty much given up in ever seeing any better rendering in the Web Browser control. Now at least my apps can take advantage of newer HTML features. Now if we could only get better HTML Editing support somehow <snicker>… ah can’t have everything.© Rick Strahl, West Wind Technologies, 2005-2011Posted in .NET  FoxPro  Windows  

  Read the article

• PPTP connection disconnect

  - by Vladimir Franciz S. Blando

  My pptp connection wont stay connected, it will disconnect in less than a minute here are some relevant log entries May 31 13:32:31 localhost NetworkManager[931]: <info> Starting VPN service 'pptp'... May 31 13:32:31 localhost NetworkManager[931]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 15216 May 31 13:32:31 localhost NetworkManager[931]: <info> VPN service 'pptp' appeared; activating connections May 31 13:32:31 localhost NetworkManager[931]: <info> VPN plugin state changed: init (1) May 31 13:32:31 localhost NetworkManager[931]: <info> VPN plugin state changed: starting (3) May 31 13:32:31 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (Connect) reply received. May 31 13:32:31 localhost pppd[15221]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. May 31 13:32:31 localhost pppd[15221]: pppd 2.4.5 started by root, uid 0 May 31 13:32:31 localhost pptp[15224]: nm-pptp-service-15216 log[main:pptp.c:314]: The synchronous pptp option is NOT activated May 31 13:32:31 localhost pppd[15221]: Using interface ppp0 May 31 13:32:31 localhost pppd[15221]: Connect: ppp0 <--> /dev/pts/5 May 31 13:32:31 localhost NetworkManager[931]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) May 31 13:32:31 localhost NetworkManager[931]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request' May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established. May 31 13:32:33 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' May 31 13:32:34 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. May 31 13:32:34 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 1536). May 31 13:32:37 localhost pppd[15221]: CHAP authentication succeeded May 31 13:32:37 localhost kernel: [54007.078553] PPP MPPE Compression module registered May 31 13:32:40 localhost pppd[15221]: MPPE 128-bit stateless compression enabled May 31 13:32:42 localhost pppd[15221]: local IP address 10.100.0.52 May 31 13:32:42 localhost pppd[15221]: remote IP address 10.100.0.1 May 31 13:32:42 localhost pppd[15221]: primary DNS address 4.2.2.1 May 31 13:32:42 localhost pppd[15221]: secondary DNS address 255.255.255.255 May 31 13:32:42 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (IP Config Get) reply received. May 31 13:32:42 localhost NetworkManager[931]: <info> VPN Gateway: 103.28.219.2 May 31 13:32:42 localhost NetworkManager[931]: <info> Tunnel Device: ppp0 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Address: 10.100.0.52 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Prefix: 32 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Point-to-Point Address: 10.100.0.1 May 31 13:32:42 localhost NetworkManager[931]: <info> Maximum Segment Size (MSS): 0 May 31 13:32:42 localhost NetworkManager[931]: <info> Forbid Default Route: no May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 DNS: 4.2.2.1 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 DNS: 255.255.255.255 May 31 13:32:42 localhost NetworkManager[931]: <info> DNS Domain: '(none)' May 31 13:32:43 localhost dnsmasq[2127]: exiting on receipt of SIGTERM May 31 13:32:43 localhost NetworkManager[931]: <info> DNS: starting dnsmasq... May 31 13:32:43 localhost NetworkManager[931]: <info> (ppp0): writing resolv.conf to /sbin/resolvconf May 31 13:32:43 localhost dnsmasq[15290]: error at line 2 of /var/run/nm-dns-dnsmasq.conf May 31 13:32:43 localhost dnsmasq[15290]: FAILED to start up May 31 13:32:43 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (IP Config Get) complete. May 31 13:32:43 localhost NetworkManager[931]: <info> Policy set 'Dynalabs' (ppp0) as default for IPv4 routing and DNS. May 31 13:32:43 localhost NetworkManager[931]: <info> VPN plugin state changed: started (4) May 31 13:32:43 localhost NetworkManager[931]: <warn> dnsmasq exited with error: Configuration problem (1) May 31 13:32:43 localhost NetworkManager[931]: <info> (ppp0): writing resolv.conf to /sbin/resolvconf May 31 13:32:43 localhost dbus[872]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) May 31 13:32:43 localhost dbus[872]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' May 31 13:33:00 localhost ntpdate[15370]: step time server 91.189.94.4 offset -1.110301 sec May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd6d6 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x93aa May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xcc83 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2031 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x13d4 May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x5b11 May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x414b May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2f5f May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe9ff May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8e20 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8f0 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf166 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x36e6 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xdd19 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xda26 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xac5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x53a5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x507e May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x1dc5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf87b May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2f27 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd10c May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x66ef May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xa294 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xb15 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x52a2 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd863 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8a96 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xde19 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x9763 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xb23 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x83ca May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x964e May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe8ae May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf614 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x9b1 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf086 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xbff4 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x66c5 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe42 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf295 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x86fe May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x3bc1 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xbaad May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x88b5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd7a May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x30d5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2d8f May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x3933 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8d42 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x4b4 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xa205 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x7cc5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x1b6a May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf004 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x21b6 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x51eb

  Read the article

• Can't remove burg theme packages

  - by Lassi

  Today after trying to install and remove BURG and few themes I faced an issue. Now I can't install or remove anything. Here is the output (unfortunately partly in Finnish, I couldn't change language since it also seems to depend on package listings: lassi@lassi-ubuntu:~$ sudo apt-get autoremove Luetaan pakettiluetteloita... Valmis Muodostetaan riippuvuussuhteiden puu Luetaan tilatietoja... Valmis Seuraavat paketit POISTETAAN: burg-theme-fortune burg-theme-gnome burg-theme-picchio 0 päivitetty, 0 uutta asennusta, 3 poistettavaa ja 0 päivittämätöntä. 3 ei asennettu kokonaan tai poistettiin. Toiminnon jälkeen vapautuu 7 180 k t levytilaa. Haluatko jatkaa [K/e]? k (Luetaan tietokantaa... 166462 files and directories currently installed.) Poistetaan pakettia burg-theme-fortune... sudo: update-burg: command not found dpkg: virhe käsiteltäessä burg-theme-fortune (--remove): aliprosessi installed post-removal script palautti virhetilakoodin 1 Poistetaan pakettia burg-theme-gnome... sudo: update-burg: command not found dpkg: virhe käsiteltäessä burg-theme-gnome (--remove): aliprosessi installed post-removal script palautti virhetilakoodin 1 Poistetaan pakettia burg-theme-picchio... sudo: update-burg: command not found dpkg: virhe käsiteltäessä burg-theme-picchio (--remove): aliprosessi installed post-removal script palautti virhetilakoodin 1 Käsittelyssä tapahtui liian monta virhettä: burg-theme-fortune burg-theme-gnome burg-theme-picchio E: Sub-process /usr/bin/dpkg returned an error code (1) Basically what seems to happen is this: It creates the package lists, then tries to remove packet burg-theme-fortune. This fails as update-burg command was not found. Then dpkg reports an error while processing the packet. Same goes with all 3 packages. In the end it claims that there were too many errors, and packages stay installed. I also tried installing burg as it tries to run command update-burg, but appears that it tries to delete these packages always when I try to install or remove or do anything with apt. Any ideas how I could solve this issue? Edit: Here is the output of apt-get install burg (tried installing again to get English output) lassi@lassi-ubuntu:~$ LC_ALL=C sudo apt-get install burg [sudo] password for lassi: Reading package lists... Done Building dependency tree Reading state information... Done burg is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 3 not fully installed or removed. Need to get 0 B/6169 kB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 167497 files and directories currently installed.) Preparing to replace burg-theme-fortune 0.5.0-1 (using .../burg-theme-fortune_0.5.0-1_all.deb) ... Unpacking replacement burg-theme-fortune ... Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: warning: subprocess old post-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: error processing /var/cache/apt/archives/burg-theme-fortune_0.5.0-1_all.deb (--unpack): subprocess new post-removal script returned error exit status 1 Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: error while cleaning up: subprocess new post-removal script returned error exit status 1 Preparing to replace burg-theme-gnome 0.5.0-1 (using .../burg-theme-gnome_0.5.0-1_all.deb) ... Unpacking replacement burg-theme-gnome ... Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: warning: subprocess old post-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: error processing /var/cache/apt/archives/burg-theme-gnome_0.5.0-1_all.deb (--unpack): subprocess new post-removal script returned error exit status 1 Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: error while cleaning up: subprocess new post-removal script returned error exit status 1 Preparing to replace burg-theme-picchio 0.5.0-1 (using .../burg-theme-picchio_0.5.0-1_all.deb) ... Unpacking replacement burg-theme-picchio ... Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: warning: subprocess old post-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: error processing /var/cache/apt/archives/burg-theme-picchio_0.5.0-1_all.deb (--unpack): subprocess new post-removal script returned error exit status 1 Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: error while cleaning up: subprocess new post-removal script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/burg-theme-fortune_0.5.0-1_all.deb /var/cache/apt/archives/burg-theme-gnome_0.5.0-1_all.deb /var/cache/apt/archives/burg-theme-picchio_0.5.0-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) lassi@lassi-ubuntu:~$

  Read the article

• DTracing TCP congestion control

  - by user12820842

  In a previous post, I showed how we can use DTrace to probe TCP receive and send window events. TCP receive and send windows are in effect both about flow-controlling how much data can be received - the receive window reflects how much data the local TCP is prepared to receive, while the send window simply reflects the size of the receive window of the peer TCP. Both then represent flow control as imposed by the receiver. However, consider that without the sender imposing flow control, and a slow link to a peer, TCP will simply fill up it's window with sent segments. Dealing with multiple TCP implementations filling their peer TCP's receive windows in this manner, busy intermediate routers may drop some of these segments, leading to timeout and retransmission, which may again lead to drops. This is termed congestion, and TCP has multiple congestion control strategies. We can see that in this example, we need to have some way of adjusting how much data we send depending on how quickly we receive acknowledgement - if we get ACKs quickly, we can safely send more segments, but if acknowledgements come slowly, we should proceed with more caution. More generally, we need to implement flow control on the send side also. Slow Start and Congestion Avoidance From RFC2581, let's examine the relevant variables: "The congestion window (cwnd) is a sender-side limit on the amount of data the sender can transmit into the network before receiving an acknowledgment (ACK). Another state variable, the slow start threshold (ssthresh), is used to determine whether the slow start or congestion avoidance algorithm is used to control data transmission" Slow start is used to probe the network's ability to handle transmission bursts both when a connection is first created and when retransmission timers fire. The latter case is important, as the fact that we have effectively lost TCP data acts as a motivator for re-probing how much data the network can handle from the sending TCP. The congestion window (cwnd) is initialized to a relatively small value, generally a low multiple of the sending maximum segment size. When slow start kicks in, we will only send that number of bytes before waiting for acknowledgement. When acknowledgements are received, the congestion window is increased in size until cwnd reaches the slow start threshold ssthresh value. For most congestion control algorithms the window increases exponentially under slow start, assuming we receive acknowledgements. We send 1 segment, receive an ACK, increase the cwnd by 1 MSS to 2*MSS, send 2 segments, receive 2 ACKs, increase the cwnd by 2*MSS to 4*MSS, send 4 segments etc. When the congestion window exceeds the slow start threshold, congestion avoidance is used instead of slow start. During congestion avoidance, the congestion window is generally updated by one MSS for each round-trip-time as opposed to each ACK, and so cwnd growth is linear instead of exponential (we may receive multiple ACKs within a single RTT). This continues until congestion is detected. If a retransmit timer fires, congestion is assumed and the ssthresh value is reset. It is reset to a fraction of the number of bytes outstanding (unacknowledged) in the network. At the same time the congestion window is reset to a single max segment size. Thus, we initiate slow start until we start receiving acknowledgements again, at which point we can eventually flip over to congestion avoidance when cwnd ssthresh. Congestion control algorithms differ most in how they handle the other indication of congestion - duplicate ACKs. A duplicate ACK is a strong indication that data has been lost, since they often come from a receiver explicitly asking for a retransmission. In some cases, a duplicate ACK may be generated at the receiver as a result of packets arriving out-of-order, so it is sensible to wait for multiple duplicate ACKs before assuming packet loss rather than out-of-order delivery. This is termed fast retransmit (i.e. retransmit without waiting for the retransmission timer to expire). Note that on Oracle Solaris 11, the congestion control method used can be customized. See here for more details. In general, 3 or more duplicate ACKs indicate packet loss and should trigger fast retransmit . It's best not to revert to slow start in this case, as the fact that the receiver knew it was missing data suggests it has received data with a higher sequence number, so we know traffic is still flowing. Falling back to slow start would be excessive therefore, so fast recovery is used instead. Observing slow start and congestion avoidance The following script counts TCP segments sent when under slow start (cwnd ssthresh). #!/usr/sbin/dtrace -s #pragma D option quiet tcp:::connect-request / start[args[1]-cs_cid] == 0/ { start[args[1]-cs_cid] = 1; } tcp:::send / start[args[1]-cs_cid] == 1 && args[3]-tcps_cwnd tcps_cwnd_ssthresh / { @c["Slow start", args[2]-ip_daddr, args[4]-tcp_dport] = count(); } tcp:::send / start[args[1]-cs_cid] == 1 && args[3]-tcps_cwnd args[3]-tcps_cwnd_ssthresh / { @c["Congestion avoidance", args[2]-ip_daddr, args[4]-tcp_dport] = count(); } As we can see the script only works on connections initiated since it is started (using the start[] associative array with the connection ID as index to set whether it's a new connection (start[cid] = 1). From there we simply differentiate send events where cwnd ssthresh (congestion avoidance). Here's the output taken when I accessed a YouTube video (where rport is 80) and from an FTP session where I put a large file onto a remote system. # dtrace -s tcp_slow_start.d ^C ALGORITHM RADDR RPORT #SEG Slow start 10.153.125.222 20 6 Slow start 138.3.237.7 80 14 Slow start 10.153.125.222 21 18 Congestion avoidance 10.153.125.222 20 1164 We see that in the case of the YouTube video, slow start was exclusively used. Most of the segments we sent in that case were likely ACKs. Compare this case - where 14 segments were sent using slow start - to the FTP case, where only 6 segments were sent before we switched to congestion avoidance for 1164 segments. In the case of the FTP session, the FTP data on port 20 was predominantly sent with congestion avoidance in operation, while the FTP session relied exclusively on slow start. For the default congestion control algorithm - "newreno" - on Solaris 11, slow start will increase the cwnd by 1 MSS for every acknowledgement received, and by 1 MSS for each RTT in congestion avoidance mode. Different pluggable congestion control algorithms operate slightly differently. For example "highspeed" will update the slow start cwnd by the number of bytes ACKed rather than the MSS. And to finish, here's a neat oneliner to visually display the distribution of congestion window values for all TCP connections to a given remote port using a quantization. In this example, only port 80 is in use and we see the majority of cwnd values for that port are in the 4096-8191 range. # dtrace -n 'tcp:::send { @q[args[4]-tcp_dport] = quantize(args[3]-tcps_cwnd); }' dtrace: description 'tcp:::send ' matched 10 probes ^C 80 value ------------- Distribution ------------- count -1 | 0 0 |@@@@@@ 5 1 | 0 2 | 0 4 | 0 8 | 0 16 | 0 32 | 0 64 | 0 128 | 0 256 | 0 512 | 0 1024 | 0 2048 |@@@@@@@@@ 8 4096 |@@@@@@@@@@@@@@@@@@@@@@@@@@ 23 8192 | 0

  Read the article

• FreeBSD performance tuning. Sysctls, loader.conf, kernel

  - by SaveTheRbtz

  I wanted to share knowledge of tuning FreeBSD via sysctl.conf/loader.conf/KENCONF. It was initially based on Igor Sysoev's (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Tunings are for FreeBSD-CURRENT. Since 7.2 amd64 some of them are tuned well by default. Prior 7.0 some of them are boot only (set via /boot/loader.conf) or does not exist at all. sysctl.conf: # No zero mapping feature # May break wine # (There are also reports about broken samba3) #security.bsd.map_at_zero=0 # If you have really busy webserver with apache13 you may run out of processes #kern.maxproc=10000 # Same for servers with apache2 / Pound #kern.threads.max_threads_per_proc=4096 # Max. backlog size kern.ipc.somaxconn=4096 # Shared memory // 7.2+ can use shared memory > 2Gb kern.ipc.shmmax=2147483648 # Sockets kern.ipc.maxsockets=204800 # Can cause this on older kernels: # http://old.nabble.com/Significant-performance-regression-for-increased-maxsockbuf-on-8.0-RELEASE-tt26745981.html#a26745981 ) kern.ipc.maxsockbuf=10485760 # Mbuf 2k clusters (on amd64 7.2+ 25600 is default) # For such high value vm.kmem_size must be increased to 3G kern.ipc.nmbclusters=262144 # Jumbo pagesize(_SC_PAGESIZE) clusters # Used as general packet storage for jumbo frames # can be monitored via `netstat -m` #kern.ipc.nmbjumbop=262144 # Jumbo 9k/16k clusters # If you are using them #kern.ipc.nmbjumbo9=65536 #kern.ipc.nmbjumbo16=32768 # For lower latency you can decrease scheduler's maximum time slice # default: stathz/10 (~ 13) #kern.sched.slice=1 # Increase max command-line length showed in `ps` (e.g for Tomcat/Java) # Default is PAGE_SIZE / 16 or 256 on x86 # This avoids commands to be presented as [executable] in `ps` # For more info see: http://www.freebsd.org/cgi/query-pr.cgi?pr=120749 kern.ps_arg_cache_limit=4096 # Every socket is a file, so increase them kern.maxfiles=204800 kern.maxfilesperproc=200000 kern.maxvnodes=200000 # On some systems HPET is almost 2 times faster than default ACPI-fast # Useful on systems with lots of clock_gettime / gettimeofday calls # See http://old.nabble.com/ACPI-fast-default-timecounter,-but-HPET-83--faster-td23248172.html # After revision 222222 HPET became default: http://svnweb.freebsd.org/base?view=revision&revision=222222 kern.timecounter.hardware=HPET # Small receive space, only usable on http-server, on file server this # should be increased to 65535 or even more #net.inet.tcp.recvspace=8192 # This is useful on Fat-Long-Pipes #net.inet.tcp.recvbuf_max=10485760 #net.inet.tcp.recvbuf_inc=65535 # Small send space is useful for http servers that serve small files # Autotuned since 7.x net.inet.tcp.sendspace=16384 # This is useful on Fat-Long-Pipes #net.inet.tcp.sendbuf_max=10485760 #net.inet.tcp.sendbuf_inc=65535 # Turn off receive autotuning # You can play with it. #net.inet.tcp.recvbuf_auto=0 #net.inet.tcp.sendbuf_auto=0 # This should be enabled if you going to use big spaces (>64k) # Also timestamp field is useful when using syncookies net.inet.tcp.rfc1323=1 # Turn this off on high-speed, lossless connections (LAN 1Gbit+) # If you set it there is no need in TCP_NODELAY sockopt (see man tcp) net.inet.tcp.delayed_ack=0 # This feature is useful if you are serving data over modems, Gigabit Ethernet, # or even high speed WAN links (or any other link with a high bandwidth delay product), # especially if you are also using window scaling or have configured a large send window. # Automatically disables on small RTT ( http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_subr.c?#rev1.237 ) # This sysctl was removed in 10-CURRENT: # See: http://www.mail-archive.com/[email protected]/msg06178.html #net.inet.tcp.inflight.enable=0 # TCP slowstart algorithm tunings # We assuming we have very fast clients #net.inet.tcp.slowstart_flightsize=100 #net.inet.tcp.local_slowstart_flightsize=100 # Disable randomizing of ports to avoid false RST # Before usage check SA here www.bsdcan.org/2006/papers/ImprovingTCPIP.pdf # (it's also says that port randomization auto-disables at some conn.rates, but I didn't checked it thou) #net.inet.ip.portrange.randomized=0 # Increase portrange # For outgoing connections only. Good for seed-boxes and ftp servers. net.inet.ip.portrange.first=1024 net.inet.ip.portrange.last=65535 # # stops route cache degregation during a high-bandwidth flood # http://www.freebsd.org/doc/en/books/handbook/securing-freebsd.html #net.inet.ip.rtexpire=2 net.inet.ip.rtminexpire=2 net.inet.ip.rtmaxcache=1024 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # # There is also good example of sysctl.conf with comments: # http://www.thern.org/projects/sysctl.conf # # icmp may NOT rst, helpful for those pesky spoofed # icmp/udp floods that end up taking up your outgoing # bandwidth/ifqueue due to all that outgoing RST traffic. # #net.inet.tcp.icmp_may_rst=0 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # IPv6 Security # For more info see http://www.fosslc.org/drupal/content/security-implications-ipv6 # Disable Node info replies # To see this vulnerability in action run `ping6 -a sglAac ::1` or `ping6 -w ::1` on unprotected node net.inet6.icmp6.nodeinfo=0 # Turn on IPv6 privacy extensions # For more info see proposal http://unix.derkeiler.com/Mailing-Lists/FreeBSD/net/2008-06/msg00103.html net.inet6.ip6.use_tempaddr=1 net.inet6.ip6.prefer_tempaddr=1 # Disable ICMP redirect net.inet6.icmp6.rediraccept=0 # Disable acceptation of RA and auto linklocal generation if you don't use them #net.inet6.ip6.accept_rtadv=0 #net.inet6.ip6.auto_linklocal=0 # Increases default TTL, sometimes useful # Default is 64 net.inet.ip.ttl=128 # Lessen max segment life to conserve resources # ACK waiting time in miliseconds # (default: 30000. RFC from 1979 recommends 120000) net.inet.tcp.msl=5000 # Max bumber of timewait sockets net.inet.tcp.maxtcptw=200000 # Don't use tw on local connections # As of 15 Apr 2009. Igor Sysoev says that nolocaltimewait has some buggy realization. # So disable it or now till get fixed #net.inet.tcp.nolocaltimewait=1 # FIN_WAIT_2 state fast recycle net.inet.tcp.fast_finwait2_recycle=1 # Time before tcp keepalive probe is sent # default is 2 hours (7200000) #net.inet.tcp.keepidle=60000 # Should be increased until net.inet.ip.intr_queue_drops is zero net.inet.ip.intr_queue_maxlen=4096 # Interrupt handling via multiple CPU, but with context switch. # You can play with it. Default is 1; #net.isr.direct=0 # This is for routers only #net.inet.ip.forwarding=1 #net.inet.ip.fastforwarding=1 # This speed ups dummynet when channel isn't saturated net.inet.ip.dummynet.io_fast=1 # Increase dummynet(4) hash #net.inet.ip.dummynet.hash_size=2048 #net.inet.ip.dummynet.max_chain_len # Should be increased when you have A LOT of files on server # (Increase until vfs.ufs.dirhash_mem becomes lower) vfs.ufs.dirhash_maxmem=67108864 # Note from commit http://svn.freebsd.org/base/head@211031 : # For systems with RAID volumes and/or virtualization envirnments, where # read performance is very important, increasing this sysctl tunable to 32 # or even more will demonstratively yield additional performance benefits. vfs.read_max=32 # Explicit Congestion Notification (see http://en.wikipedia.org/wiki/Explicit_Congestion_Notification) net.inet.tcp.ecn.enable=1 # Flowtable - flow caching mechanism # Useful for routers #net.inet.flowtable.enable=1 #net.inet.flowtable.nmbflows=65535 # Extreme polling tuning #kern.polling.burst_max=1000 #kern.polling.each_burst=1000 #kern.polling.reg_frac=100 #kern.polling.user_frac=1 #kern.polling.idle_poll=0 # IPFW dynamic rules and timeouts tuning # Increase dyn_buckets till net.inet.ip.fw.curr_dyn_buckets is lower net.inet.ip.fw.dyn_buckets=65536 net.inet.ip.fw.dyn_max=65536 net.inet.ip.fw.dyn_ack_lifetime=120 net.inet.ip.fw.dyn_syn_lifetime=10 net.inet.ip.fw.dyn_fin_lifetime=2 net.inet.ip.fw.dyn_short_lifetime=10 # Make packets pass firewall only once when using dummynet # i.e. packets going thru pipe are passing out from firewall with accept #net.inet.ip.fw.one_pass=1 # shm_use_phys Wires all shared pages, making them unswappable # Use this to lessen Virtual Memory Manager's work when using Shared Mem. # Useful for databases #kern.ipc.shm_use_phys=1 # ZFS # Enable prefetch. Useful for sequential load type i.e fileserver. # FreeBSD sets vfs.zfs.prefetch_disable to 1 on any i386 systems and # on any amd64 systems with less than 4GB of avaiable memory # For additional info check this nabble thread http://old.nabble.com/Samba-read-speed-performance-tuning-td27964534.html #vfs.zfs.prefetch_disable=0 # On highload servers you may notice following message in dmesg: # "Approaching the limit on PV entries, consider increasing either the # vm.pmap.shpgperproc or the vm.pmap.pv_entry_max tunable" vm.pmap.shpgperproc=2048 loader.conf: # Accept filters for data, http and DNS requests # Useful when your software uses select() instead of kevent/kqueue or when you under DDoS # DNS accf available on 8.0+ accf_data_load="YES" accf_http_load="YES" accf_dns_load="YES" # Async IO system calls aio_load="YES" # Linux specific devices in /dev # As for 8.1 it only /dev/full #lindev_load="YES" # Adds NCQ support in FreeBSD # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ # 8.0+ only #ahci_load="YES" #siis_load="YES" # FreeBSD 8.2+ # New Congestion Control for FreeBSD # http://caia.swin.edu.au/urp/newtcp/tools/cc_chd-readme-0.1.txt # http://www.ietf.org/proceedings/78/slides/iccrg-5.pdf # Initial merge commit message http://www.mail-archive.com/[email protected]/msg31410.html #cc_chd_load="YES" # Increase kernel memory size to 3G. # # Use ONLY if you have KVA_PAGES in kernel configuration, and you have more than 3G RAM # Otherwise panic will happen on next reboot! # # It's required for high buffer sizes: kern.ipc.nmbjumbop, kern.ipc.nmbclusters, etc # Useful on highload stateful firewalls, proxies or ZFS fileservers # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #vm.kmem_size="3G" # If your server has lots of swap (>4Gb) you should increase following value # according to http://lists.freebsd.org/pipermail/freebsd-hackers/2009-October/029616.html # Otherwise you'll be getting errors # "kernel: swap zone exhausted, increase kern.maxswzone" # kern.maxswzone="256M" # Older versions of FreeBSD can't tune maxfiles on the fly #kern.maxfiles="200000" # Useful for databases # Sets maximum data size to 1G # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #kern.maxdsiz="1G" # Maximum buffer size(vfs.maxbufspace) # You can check current one via vfs.bufspace # Should be lowered/upped depending on server's load-type # Usually decreased to preserve kmem # (default is 10% of mem) #kern.maxbcache="512M" # Sendfile buffers # For i386 only #kern.ipc.nsfbufs=10240 # FreeBSD 9+ # HPET "legacy route" support. It should allow HPET to work per-CPU # See http://www.mail-archive.com/[email protected]/msg03603.html #hint.atrtc.0.clock=0 #hint.attimer.0.clock=0 #hint.hpet.0.legacy_route=1 # syncache Hash table tuning net.inet.tcp.syncache.hashsize=1024 net.inet.tcp.syncache.bucketlimit=512 net.inet.tcp.syncache.cachelimit=65536 # Increased hostcache # Later host cache can be viewed via net.inet.tcp.hostcache.list hidden sysctl # Very useful for it's RTT RTTVAR # Must be power of two net.inet.tcp.hostcache.hashsize=65536 # hashsize * bucketlimit (which is 30 by default) # It allocates 255Mb (1966080*136) of RAM net.inet.tcp.hostcache.cachelimit=1966080 # TCP control-block Hash table tuning net.inet.tcp.tcbhashsize=4096 # Disable ipfw deny all # Should be uncommented when there is a chance that # kernel and ipfw binary may be out-of sync on next reboot #net.inet.ip.fw.default_to_accept=1 # # SIFTR (Statistical Information For TCP Research) is a kernel module that # logs a range of statistics on active TCP connections to a log file. # See prerelease notes http://groups.google.com/group/mailing.freebsd.current/browse_thread/thread/b4c18be6cdce76e4 # and man 4 sitfr #siftr_load="YES" # Enable superpages, for 7.2+ only # Also read http://lists.freebsd.org/pipermail/freebsd-hackers/2009-November/030094.html vm.pmap.pg_ps_enabled=1 # Usefull if you are using Intel-Gigabit NIC #hw.em.rxd=4096 #hw.em.txd=4096 #hw.em.rx_process_limit="-1" # Also if you have ALOT interrupts on NIC - play with following parameters # NOTE: You should set them for every NIC #dev.em.0.rx_int_delay: 250 #dev.em.0.tx_int_delay: 250 #dev.em.0.rx_abs_int_delay: 250 #dev.em.0.tx_abs_int_delay: 250 # There is also multithreaded version of em/igb drivers can be found here: # http://people.yandex-team.ru/~wawa/ # # for additional em monitoring and statistics use # sysctl dev.em.0.stats=1 ; dmesg # sysctl dev.em.0.debug=1 ; dmesg # Also after r209242 (-CURRENT) there is a separate sysctl for each stat variable; # Same tunings for igb #hw.igb.rxd=4096 #hw.igb.txd=4096 #hw.igb.rx_process_limit=100 # Some useful netisr tunables. See sysctl net.isr #net.isr.maxthreads=4 #net.isr.defaultqlimit=4096 #net.isr.maxqlimit: 10240 # Bind netisr threads to CPUs #net.isr.bindthreads=1 # # FreeBSD 9.x+ # Increase interface send queue length # See commit message http://svn.freebsd.org/viewvc/base?view=revision&revision=207554 #net.link.ifqmaxlen=1024 # Nicer boot logo =) loader_logo="beastie" And finally here is KERNCONF: # Just some of them, see also # cat /sys/{i386,amd64,}/conf/NOTES # This one useful only on i386 #options KVA_PAGES=512 # You can play with HZ in environments with high interrupt rate (default is 1000) # 100 is for my notebook to prolong it's battery life #options HZ=100 # Polling is goot on network loads with high packet rates and low-end NICs # NB! Do not enable it if you want more than one netisr thread #options DEVICE_POLLING # Eliminate datacopy on socket read-write # To take advantage with zero copy sockets you should have an MTU >= 4k # This req. is only for receiving data. # Read more in man zero_copy_sockets # Also this epic thread on kernel trap: # http://kerneltrap.org/node/6506 # Here Linus says that "anybody that does it that way (FreeBSD) is totally incompetent" #options ZERO_COPY_SOCKETS # Support TCP sign. Used for IPSec options TCP_SIGNATURE # There was stackoverflow found in KAME IPSec stack: # See http://secunia.com/advisories/43995/ # For quick workaround you can use `ipfw add deny proto ipcomp` options IPSEC # This ones can be loaded as modules. They described in loader.conf section #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # Adding ipfw, also can be loaded as modules options IPFIREWALL # On 8.1+ you can disable verbose to see blocked packets on ipfw0 interface. # Also there is no point in compiling verbose into the kernel, because # now there is net.inet.ip.fw.verbose tunable. #options IPFIREWALL_VERBOSE #options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_FORWARD # Adding kernel NAT options IPFIREWALL_NAT options LIBALIAS # Traffic shaping options DUMMYNET # Divert, i.e. for userspace NAT options IPDIVERT # This is for OpenBSD's pf firewall device pf device pflog # pf's QoS - ALTQ options ALTQ options ALTQ_CBQ # Class Bases Queuing (CBQ) options ALTQ_RED # Random Early Detection (RED) options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC) options ALTQ_PRIQ # Priority Queuing (PRIQ) options ALTQ_NOPCC # Required for SMP build # Pretty console # Manual can be found here http://forums.freebsd.org/showthread.php?t=6134 #options VESA #options SC_PIXEL_MODE # Disable reboot on Ctrl Alt Del #options SC_DISABLE_REBOOT # Change normal|kernel messages color options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK) # More scroll space options SC_HISTORY_SIZE=8192 # Adding hardware crypto device device crypto device cryptodev # Useful network interfaces device vlan device tap #Virtual Ethernet driver device gre #IP over IP tunneling device if_bridge #Bridge interface device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPsec interface device lagg #Link aggregation interface device stf #IPv4-IPv6 port # Also for my notebook, but may be used with Opteron device amdtemp # Same for Intel processors device coretemp # man 4 cpuctl device cpuctl # CPU control pseudo-device # Support for ECMP. More than one route for destination # Works even with default route so one can use it as LB for two ISP # For now code is unstable and panics (panic: rtfree 2) on route deletions. #options RADIX_MPATH # Multicast routing #options MROUTING #options PIM # Debug & DTrace options KDB # Kernel debugger related code options KDB_TRACE # Print a stack trace for a panic options KDTRACE_FRAME # amd64-only(?) options KDTRACE_HOOKS # all architectures - enable general DTrace hooks #options DDB #options DDB_CTF # all architectures - kernel ELF linker loads CTF data # Adaptive spining in lockmgr (8.x+) # See http://www.mail-archive.com/[email protected]/msg10782.html options ADAPTIVE_LOCKMGRS # UTF-8 in console (8.x+) #options TEKEN_UTF8 # FreeBSD 8.1+ # Deadlock resolver thread # For additional information see http://www.mail-archive.com/[email protected]/msg18124.html # (FYI: "resolution" is panic so use with caution) #options DEADLKRES # Increase maximum size of Raw I/O and sendfile(2) readahead #options MAXPHYS=(1024*1024) #options MAXBSIZE=(1024*1024) # For scheduler debug enable following option. # Debug will be available via `kern.sched.stats` sysctl # For more information see http://svnweb.freebsd.org/base/head/sys/conf/NOTES?view=markup #options SCHED_STATS If you are tuning network for maximum performance you may wish to play with ifconfig options like: # You can list all capabilities via `ifconfig -m` ifconfig [-]rxcsum [-]txcsum [-]tso [-]lro mtu In case you've enabled DDB in kernel config, you should edit your /etc/ddb.conf and add something like this to enable automatic reboot (and textdump as bonus): script kdb.enter.panic=textdump set; capture on; show pcpu; bt; ps; alltrace; capture off; call doadump; reset script kdb.enter.default=textdump set; capture on; bt; ps; capture off; call doadump; reset And do not forget to add ddb_enable="YES" to /etc/rc.conf Since FreeBSD 9 you can select to enable/disable flowcontrol on your NIC: # See http://en.wikipedia.org/wiki/Ethernet_flow_control and # http://www.mail-archive.com/[email protected]/msg07927.html for additional info ifconfig bge0 media auto mediaopt flowcontrol PS. Also most of FreeBSD's limits can be monitored by # vmstat -z and # limits PPS. variety of network counters can be monitored via # netstat -s In FreeBSD-9 netstat's -Q option appeared, try following command to display netisr stats # netstat -Q PPPS. also see # man 7 tuning PPPPS. I wanted to thank FreeBSD community, especially author of nginx - Igor Sysoev, nginx-ru@ and FreeBSD-performance@ mailing lists for providing useful information about FreeBSD tuning. FreeBSD WIP * Whats cooking for FreeBSD 7? * Whats cooking for FreeBSD 8? * Whats cooking for FreeBSD 9? So here is the question: What tunings are you using on yours FreeBSD servers? You can also post your /etc/sysctl.conf, /boot/loader.conf, kernel options, etc with description of its' meaning (do not copy-paste from sysctl -d). Don't forget to specify server type (web, smb, gateway, etc) Let's share experience!

  Read the article

• Sharepoint 2007: author.dll status code?

  - by CrazyNick

  Is there a way to find any info using /_vti_bin/_vti_aut /author.dll status code? <html><head><title>vermeer RPC packet</title></head> <body> <p>method= <p>status= <ul> <li>status=393226 <li>osstatus=0 <li>msg=The form submission cannot be processed because it exceeded the maximum length allowed by the Web administrator. Please resubmit the form with less data. <li>osmsg= </ul> </body> </html>

  Read the article

• MS Windows Server 2008R2 slow file copy, slow network connection

  - by MattrixHax

  i just setup a windows 2008R2 standard server, with the only installed app being Hyper-V, and only 1 windows XP VM is running. Whenever i try to copy a file from my windows 7 laptop over to the 2008R2 server machine's admin shares ( \\servername\c$ ) the files start transferring around 60mb/s and then drop to around 5mb/s. My windows 7 machine and the server 2008 machine are both in WORKGROUP (no domain here). when i try the same transfer to our server 2003 box the transfer speeds are fine. tried disabling autotuning (netsh interface tcp set global autotuninglevel=disabled) as well as turning off the checksum offload to the adapter (tx and rx) - i still see strange packet errors (bad header checksum) using wireshark and just cannot seem to track down what the issue is - over 1 hour to transfer 4gb of files from 1 server to another that are on the same GB switch is just crazy.... any ideas would be greatly appreciated!

  Read the article

• Windows 2008 R2 DHCP server not responding to DHCP discover

  - by MartinSteel

  I've got two Windows 2008 Enterprise R2 servers both running DNS and DHCP called cod & lobster. DHCP is setup using the split scope option introduced with 2008 R2, whereby both servers should respond with the first response providing the lease. Setup is as follows: Cod - IP: 192.168.0.231 - Pool: 192.168.0.101 - 192.168.0.179, exclusion for 160-179. - Response Delay: 0ms - Authorised in Active Directory (Re-authorised to confirm) - Windows firewall disabled while testing Lobster - IP: 192.168.0.232 - Pool: 192.168.0.101 - 192.168.0.179, exclusion for 101-159. - Response Delay: 1000ms - Authorised in Active Directory All DHCP leases to clients are currently being issues by Lobster rather than Cod. Packet captures with Wireshark show the following (all to broadcast address): Client - DHCP Discover Lobster - DHCP Offer (after 1s delay) Client - DHCP Request Lobster - DHCP Ack Client - DHCP Inform From my setup with two servers I'd expect to see a DHCP Offer coming from Cod almost immediately after the DHCP Discover. Does anybody have any idea what would prevent the DHCP Server responding to the discover?

  Read the article

• How to make iPhone Cisco VPN client work with ASA with certificate authentication

  - by Ben Jencks

  I have an ASA that's providing IPsec VPN services using certificate authentication (no xauth, just the certs). It works perfectly with the Cisco IPsec VPN Client. Now I'm trying to let iPhones connect. I've installed the CA cert and a client certificate on the iPhone with a profile using iPCU, along with the VPN configuration. Then connecting gives the error "Could not validate the server certificate". Additionally, the ASA logs the error "Received encrypted Oakley Informational packet with invalid payloads". FWIW, I receive the same invalid payload error when trying to use the Snow Leopard IPsec client to connect. Has anyone successfully gotten the iPhone IPsec client to work with certificate auth?

  Read the article

• Junos custom-attack signature pattern syntax

  - by James Hawkwind

  I am stuck at a point with the configuration of a custom-attack signature in Junos. According to the Junos Custom Attack Definition documentation page, I can set up a custom attack based upon a signature in the packet. In the documentation you can specify a "pattern" to match, but it fails to describe what the pattern syntax should be. Particularly, I want to match the HEX values of 8C 00 13 00 in the first four bytes of the TCP data payload. Does anyone know how to accomplish this correctly?

  Read the article

• Windows 7 Machine Makes Router Drop -All- Wireless Connections

  - by Hammer Bro.

  Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

  Read the article

• Radius Authorization against ActiveDirectory and the users file

  - by mohrphium

  I have a problem with my freeradius server configuration. I want to be able to authenticate users against Windows ActiveDirectory (2008 R2) and the users file, because some of my co-workers are not listed in AD. We use the freeradius server to authenticate WLAN users. (PEAP/MSCHAPv2) AD Authentication works great, but I still have problems with the /etc/freeradius/users file When I run freeradius -X -x I get the following: Mon Jul 2 09:15:58 2012 : Info: ++++[chap] returns noop Mon Jul 2 09:15:58 2012 : Info: ++++[mschap] returns noop Mon Jul 2 09:15:58 2012 : Info: [suffix] No '@' in User-Name = "testtest", looking up realm NULL Mon Jul 2 09:15:58 2012 : Info: [suffix] Found realm "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Stripped-User-Name = "testtest" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Realm = "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Authentication realm is LOCAL. Mon Jul 2 09:15:58 2012 : Info: ++++[suffix] returns ok Mon Jul 2 09:15:58 2012 : Info: [eap] EAP packet type response id 1 length 13 Mon Jul 2 09:15:58 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Mon Jul 2 09:15:58 2012 : Info: ++++[eap] returns updated Mon Jul 2 09:15:58 2012 : Info: [files] users: Matched entry testtest at line 1 Mon Jul 2 09:15:58 2012 : Info: ++++[files] returns ok Mon Jul 2 09:15:58 2012 : Info: ++++[expiration] returns noop Mon Jul 2 09:15:58 2012 : Info: ++++[logintime] returns noop Mon Jul 2 09:15:58 2012 : Info: [pap] WARNING: Auth-Type already set. Not setting to PAP Mon Jul 2 09:15:58 2012 : Info: ++++[pap] returns noop Mon Jul 2 09:15:58 2012 : Info: +++- else else returns updated Mon Jul 2 09:15:58 2012 : Info: ++- else else returns updated Mon Jul 2 09:15:58 2012 : Info: Found Auth-Type = EAP Mon Jul 2 09:15:58 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Mon Jul 2 09:15:58 2012 : Info: +- entering group authenticate {...} Mon Jul 2 09:15:58 2012 : Info: [eap] EAP Identity Mon Jul 2 09:15:58 2012 : Info: [eap] processing type tls Mon Jul 2 09:15:58 2012 : Info: [tls] Initiate Mon Jul 2 09:15:58 2012 : Info: [tls] Start returned 1 Mon Jul 2 09:15:58 2012 : Info: ++[eap] returns handled Sending Access-Challenge of id 199 to 192.168.61.11 port 3072 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x85469e2a854487589fb1196910cb8ae3 Mon Jul 2 09:15:58 2012 : Info: Finished request 125. Mon Jul 2 09:15:58 2012 : Debug: Going to the next request Mon Jul 2 09:15:58 2012 : Debug: Waking up in 2.4 seconds. After that it repeats the login attempt and at some point tries to authenticate against ActiveDirectory with ntlm, which doesn't work since the user exists only in the users file. Can someone help me out here? Thanks. PS: Hope this helps, freeradius trying to auth against AD: Mon Jul 2 09:15:58 2012 : Info: ++[chap] returns noop Mon Jul 2 09:15:58 2012 : Info: ++[mschap] returns noop Mon Jul 2 09:15:58 2012 : Info: [suffix] No '@' in User-Name = "testtest", looking up realm NULL Mon Jul 2 09:15:58 2012 : Info: [suffix] Found realm "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Stripped-User-Name = "testtest" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Realm = "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Authentication realm is LOCAL. Mon Jul 2 09:15:58 2012 : Info: ++[suffix] returns ok Mon Jul 2 09:15:58 2012 : Info: ++[control] returns ok Mon Jul 2 09:15:58 2012 : Info: [eap] EAP packet type response id 7 length 67 Mon Jul 2 09:15:58 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Mon Jul 2 09:15:58 2012 : Info: ++[eap] returns updated Mon Jul 2 09:15:58 2012 : Info: [files] users: Matched entry testtest at line 1 Mon Jul 2 09:15:58 2012 : Info: ++[files] returns ok Mon Jul 2 09:15:58 2012 : Info: ++[smbpasswd] returns notfound Mon Jul 2 09:15:58 2012 : Info: ++[expiration] returns noop Mon Jul 2 09:15:58 2012 : Info: ++[logintime] returns noop Mon Jul 2 09:15:58 2012 : Info: [pap] WARNING: Auth-Type already set. Not setting to PAP Mon Jul 2 09:15:58 2012 : Info: ++[pap] returns noop Mon Jul 2 09:15:58 2012 : Info: Found Auth-Type = EAP Mon Jul 2 09:15:58 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Mon Jul 2 09:15:58 2012 : Info: +- entering group authenticate {...} Mon Jul 2 09:15:58 2012 : Info: [eap] Request found, released from the list Mon Jul 2 09:15:58 2012 : Info: [eap] EAP/mschapv2 Mon Jul 2 09:15:58 2012 : Info: [eap] processing type mschapv2 Mon Jul 2 09:15:58 2012 : Info: [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Mon Jul 2 09:15:58 2012 : Info: [mschapv2] +- entering group MS-CHAP {...} Mon Jul 2 09:15:58 2012 : Info: [mschap] Creating challenge hash with username: testtest Mon Jul 2 09:15:58 2012 : Info: [mschap] Told to do MS-CHAPv2 for testtest with NT-Password Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --username=%{mschap:User-Name:-None} -> --username=testtest Mon Jul 2 09:15:58 2012 : Info: [mschap] No NT-Domain was found in the User-Name. Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: %{mschap:NT-Domain} -> Mon Jul 2 09:15:58 2012 : Info: [mschap] ... expanding second conditional Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --domain=%{%{mschap:NT-Domain}:-AD.CXO.NAME} -> --domain=AD.CXO.NAME Mon Jul 2 09:15:58 2012 : Info: [mschap] mschap2: 82 Mon Jul 2 09:15:58 2012 : Info: [mschap] Creating challenge hash with username: testtest Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=dd441972f987d68b Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=7e6c537cd5c26093789cf7831715d378e16ea3e6c5b1f579 Mon Jul 2 09:15:58 2012 : Debug: Exec-Program output: Logon failure (0xc000006d) Mon Jul 2 09:15:58 2012 : Debug: Exec-Program-Wait: plaintext: Logon failure (0xc000006d) Mon Jul 2 09:15:58 2012 : Debug: Exec-Program: returned: 1 Mon Jul 2 09:15:58 2012 : Info: [mschap] External script failed. Mon Jul 2 09:15:58 2012 : Info: [mschap] FAILED: MS-CHAP2-Response is incorrect Mon Jul 2 09:15:58 2012 : Info: ++[mschap] returns reject Mon Jul 2 09:15:58 2012 : Info: [eap] Freeing handler Mon Jul 2 09:15:58 2012 : Info: ++[eap] returns reject Mon Jul 2 09:15:58 2012 : Info: Failed to authenticate the user. Mon Jul 2 09:15:58 2012 : Auth: Login incorrect (mschap: External script says Logon failure (0xc000006d)): [testtest] (from client techap01 port 0 via TLS tunnel) PPS: Maybe the problem is located here: In /etc/freeradius/modules/ntlm_auth I have set ntlm to: program = "/usr/bin/ntlm_auth --request-nt-key --domain=AD.CXO.NAME --username=%{mschap:User-Name} --password=%{User-Password}" I need this, so users can login without adding @ad.cxo.name to their usernames. But how can I tell freeradius to try both logins, [email protected] (should fail) testtest (against users file - should work)

  Read the article

• How to enable "Sleep" for Windows 2012 server

  - by Ramesh

  I recently installed Windows Server 2012. This will serve as the dev-instance for our engineers and will be accessed in multiple time zones. I therefore plan to run this 24x7 but want to conserve energy by going to sleep mode when not in use & enable Wake-On-Magic-Packet. Based on the previous post it appears that there is no option to sleep Win Server 2012 with Hyper-V. Since I don't care much about virtualization now, I uninstalled Hyper-V. In addition to this, I have done the following 1) Ran powercfg -a. Don't find sleep. 2) Added [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hvboot] "Start"=dword:00000003 to try gaining sleep - no luck! 3) Only see Shutdown and Restart in power options. Please help me sleep and save the planet :-) Thanks, Ramesh

  Read the article

• My IIS server won't serve SSL sites to some browsers

  - by sbleon

  (Update: This is now cross-posted at http://stackoverflow.com/questions/3355000. This is the more appropriate forum, but StackOverflow gets a lot more traffic.) I've got an IIS 6.0 server that won't serve pages over SSL to some browsers. In Webkit-based browsers on OS X 10.6, I can't load pages at all. In MSIE 8 on Windows XP SP3, I can load pages, but it will sometimes hang downloading images or sending POSTs. Working: Firefox 3.6 (OS X + Windows) Chrome (Windows) Partially Working: MSIE 8 (works sometimes, but hangs up, especially on POSTs) Not Working: Chrome 5 (OS X) Safari 5 (OS X) Mobile Safari (iOS 4) On OS X (the easiest platform for me to test on), Chrome and Firefox both negotiate the same TLS Cipher, but Chrome hangs on or after the post-negotiation handshake. Chrome packet capture (via ssldump): 1 1 0.0485 (0.0485) C>S Handshake ClientHello Version 3.1 cipher suites Unknown value 0xc00a Unknown value 0xc009 Unknown value 0xc007 Unknown value 0xc008 Unknown value 0xc013 Unknown value 0xc014 Unknown value 0xc011 Unknown value 0xc012 Unknown value 0xc004 Unknown value 0xc005 Unknown value 0xc002 Unknown value 0xc003 Unknown value 0xc00e Unknown value 0xc00f Unknown value 0xc00c Unknown value 0xc00d Unknown value 0x2f TLS_RSA_WITH_RC4_128_SHA TLS_RSA_WITH_RC4_128_MD5 Unknown value 0x35 TLS_RSA_WITH_3DES_EDE_CBC_SHA Unknown value 0x32 Unknown value 0x33 Unknown value 0x38 Unknown value 0x39 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA compression methods NULL 1 2 0.3106 (0.2620) S>C Handshake ServerHello Version 3.1 session_id[32]= bb 0e 00 00 7a 7e 07 50 5e 78 48 cf 43 5a f7 4d d2 ed 72 8f ff 1d 9e 74 66 74 03 b3 bb 92 8d eb cipherSuite TLS_RSA_WITH_RC4_128_MD5 compressionMethod NULL Certificate ServerHelloDone 1 3 0.3196 (0.0090) C>S Handshake ClientKeyExchange 1 4 0.3197 (0.0000) C>S ChangeCipherSpec 1 5 0.3197 (0.0000) C>S Handshake [hang, no more data transmitted] Firefox packet capture: 1 1 0.0485 (0.0485) C>S Handshake ClientHello Version 3.1 resume [32]= 14 03 00 00 4e 28 de aa da 7a 25 87 25 32 f3 a7 ae 4c 2d a0 e4 57 cc dd d7 0e d7 82 19 f7 8f b9 cipher suites Unknown value 0xff Unknown value 0xc00a Unknown value 0xc014 Unknown value 0x88 Unknown value 0x87 Unknown value 0x39 Unknown value 0x38 Unknown value 0xc00f Unknown value 0xc005 Unknown value 0x84 Unknown value 0x35 Unknown value 0xc007 Unknown value 0xc009 Unknown value 0xc011 Unknown value 0xc013 Unknown value 0x45 Unknown value 0x44 Unknown value 0x33 Unknown value 0x32 Unknown value 0xc00c Unknown value 0xc00e Unknown value 0xc002 Unknown value 0xc004 Unknown value 0x96 Unknown value 0x41 TLS_RSA_WITH_RC4_128_MD5 TLS_RSA_WITH_RC4_128_SHA Unknown value 0x2f Unknown value 0xc008 Unknown value 0xc012 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA Unknown value 0xc00d Unknown value 0xc003 Unknown value 0xfeff TLS_RSA_WITH_3DES_EDE_CBC_SHA compression methods NULL 1 2 0.0983 (0.0497) S>C Handshake ServerHello Version 3.1 session_id[32]= 14 03 00 00 4e 28 de aa da 7a 25 87 25 32 f3 a7 ae 4c 2d a0 e4 57 cc dd d7 0e d7 82 19 f7 8f b9 cipherSuite TLS_RSA_WITH_RC4_128_MD5 compressionMethod NULL 1 3 0.0983 (0.0000) S>C ChangeCipherSpec 1 4 0.0983 (0.0000) S>C Handshake 1 5 0.1019 (0.0035) C>S ChangeCipherSpec 1 6 0.1019 (0.0000) C>S Handshake 1 7 0.1019 (0.0000) C>S application_data 1 8 0.2460 (0.1440) S>C application_data 1 9 0.3108 (0.0648) S>C application_data 1 10 0.3650 (0.0542) S>C application_data 1 11 0.4188 (0.0537) S>C application_data 1 12 0.4580 (0.0392) S>C application_data 1 13 0.4831 (0.0251) S>C application_data [etc] Update: Here's a Wireshark capture from the server end. What's going on with those two much-delayed RST packets? Is that just IIS terminating what it perceives as a non-responsive connection? 19 10.129450 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=3 TSV=699250189 TSER=0 20 10.129517 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [SYN, ACK] Seq=0 Ack=1 Win=16384 Len=0 MSS=1460 WS=0 TSV=0 TSER=0 21 10.168596 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSV=699250189 TSER=0 22 10.172950 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Client Hello 23 10.173267 10.100.xxx.xx 67.249.xxx.xxx TCP [TCP segment of a reassembled PDU] 24 10.173297 10.100.xxx.xx 67.249.xxx.xxx TCP [TCP segment of a reassembled PDU] 25 10.385180 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=148 Ack=2897 Win=524280 Len=0 TSV=699250191 TSER=163006 26 10.385235 10.100.xxx.xx 67.249.xxx.xxx TLSv1 Server Hello, Certificate, Server Hello Done 27 10.424682 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=148 Ack=4215 Win=524280 Len=0 TSV=699250192 TSER=163008 28 10.435245 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Client Key Exchange 29 10.438522 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Change Cipher Spec 30 10.438553 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [ACK] Seq=4215 Ack=421 Win=65115 Len=0 TSV=163008 TSER=699250192 31 10.449036 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Encrypted Handshake Message 32 10.580652 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [ACK] Seq=4215 Ack=458 Win=65078 Len=0 TSV=163010 TSER=699250192 7312 57.315338 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50644 [RST, ACK] Seq=1 Ack=1 Win=0 Len=0 19531 142.316425 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [RST, ACK] Seq=4215 Ack=458 Win=0 Len=0

  Read the article

• How to troubleshoot a remote wmi query/access failure?

  - by Roman

  Hi I'm using Powershell to query a remote computer in a domain for a wmi object, eg: "gwmi -computer test -class win32_bios". I get this error message: Value does not fall within the expected range Executing the query local under the same user works fine. It seems to happen on both windows 2003 and also 2008 systems. The user that runs the shell has admin rights on the local and remote server. I checked wmi and dcom permissions as far as I know how to do this, they seem to be the same on a server where it works, and another where it does not. I think it is not a network issue, all ports are open that are needed, and it also happens within the same subnet. When sniffing the traffic we see the following errors: RPC: c/o Alter Cont Resp: Call=0x2 Assoc Grp=0x4E4E Xmit=0x16D0 Recv=0x16D0 Warning: GssAPIMechanism is not found, either caused by not reassembled, conversation off or filtering. And an errormessage from Kerberos: Kerberos: KRB_ERROR - KDC_ERR_BADOPTION (13) The option code in the packet is 0x40830000 Any idea what I should look into?

  Read the article

• pcap stream rotation and pruning

  - by pilcrow

  Some of my servers collect a lot of packet data. Is there a utility (or patch to tcpdump(1)) to log a pcap stream to disk which: Rotates based on size of data written Prunes written files, keeping only the N most recent Does not re-use output filenames Is self-contained (Ruling out, e.g., a rotation with external pruning via crond(8)+tmpwatch(8)) Basically I want a multilog or svlogd that groks the pcap record format. The -W filecount option of tcpdump-4.0.0 "prunes" by recycling old filenames, which violates #3 above, forcing me to consult mtimes to determine recency and providing no guarantees against surprise truncation of the log file. The -G option introduces strftime(2)-specifier support in output filenames, which would give me at least second-precision in file names, but I can't figure out how to get pruning to work with this scheme.

  Read the article

• Server Security

  - by mahatmanich

  I want to run my own root server (directly accessible from the web without a hardware firewall) with debian lenny, apache2, php5, mysql, postfix MTA, sftp (based on ssh) and maybe dns server. What measures/software would you recomend, and why, to secure this server down and minimalize the attack vector? Webapplications aside ... This is what I have so far: iptables (for gen. packet filtering) fail2ban (brute force attack defense) ssh (chang default, port disable root access) modsecurity - is really clumsy and a pain (any alternative here?) ?Sudo why should I use it? what is the advantage to normal user handling thinking about greensql for mysql www.greensql.net is tripwire worth looking at? snort? What am I missing? What is hot and what is not? Best practices? I like "KISS" - Keep it simple secure, I know it would be nice! Thanks in advance ...

  Read the article

• nginx terminates connection after 65k bytes

  - by David Wolever

  I've got nginx configured as a front-end to a Python application running under gunicorn, but nginx is terminating connections after about 65k of data have been sent. For example, I've got a view which looks like this: def debug_big_file(request): return HttpResponse("x" * 500000) But when I access that URL through nginx, I only get 65283 bytes: $ curl https://example.com/debug/big-file | wc … curl: (18) transfer closed with outstanding read data remaining 0 1 65283 Note that everything works as expected when accessing gunicorn directly: $ curl http://localhost:1234/debug/big-file | wc … 0 1 500000 The relevant nginx config: location / { proxy_pass http://localhost:1234/; proxy_redirect off; proxy_headers_hash_bucket_size 96; } And nginx version 1.7.0 Some other facts: The number of bytes is consistent from request to request, but it varies based on the content (I first noticed it with a large PNG file, which was cut off after 65,372 bytes, not 65,283) 110k bytes are sent correctly (ie, "x" * 110000 returns all 110,000 bytes), but 120k bytes are not tcpdump suggests that nginx is sending a RST packet to gunicorn:

  Read the article

• Linux, some packets are not being NAT

  - by user70932

  Hi, I'm trying to NAT HTTP traffic, I'm new to this and facing some issues. What i'm trying to do is NAT client HTTP requests to a webserver. CLIENT - NAT BOX - WEBSERVER When the client open the IP of the NAT BOX, the request should be pass to the web server. But I'm getting "HTTP request sent, awaiting response..." and then wait serveral minutes before the request is done. Looking at the tcpdump output, it looks like the first Syn packet on (10:48:54) is being NAT but not the second, third, fourth... ACK or PSH packets, and wait until (10:52:04) it starts NAT again on the ACK packet. The iptables command I'm using is: iptables -t nat -A PREROUTING -p tcp -i eth0 --dport 80 \ -j DNAT --to-destination WEBSERVER I'm wondering what could have caused this behavior? Thanks alot. 10:48:54.907861 IP (tos 0x0, ttl 49, id 16395, offset 0, flags [DF], proto: TCP (6), length: 48) CLIENT.61736 > NATBOX.http: S, cksum 0x6019 (correct), 1589600740:1589600740(0) win 5840 <mss 1460,nop,wscale 8> 10:48:54.907874 IP (tos 0x0, ttl 48, id 16395, offset 0, flags [DF], proto: TCP (6), length: 48) CLIENT.61736 > WEBSERVER.http: S, cksum 0xb5d7 (correct), 1589600740:1589600740(0) win 5840 <mss 1460,nop,wscale 8> 10:48:55.102696 IP (tos 0x0, ttl 49, id 16397, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x2727 (correct), ack 2950613896 win 23 10:48:55.102963 IP (tos 0x0, ttl 49, id 16399, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:48:58.103078 IP (tos 0x0, ttl 49, id 16401, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:48:58.366344 IP (tos 0x0, ttl 49, id 16403, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:49:04.103204 IP (tos 0x0, ttl 49, id 16405, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:49:04.363943 IP (tos 0x0, ttl 49, id 16407, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:49:16.101583 IP (tos 0x0, ttl 49, id 16409, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:49:16.363475 IP (tos 0x0, ttl 49, id 16411, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:49:40.100796 IP (tos 0x0, ttl 49, id 16413, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:49:40.563898 IP (tos 0x0, ttl 49, id 16415, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:50:28.099396 IP (tos 0x0, ttl 49, id 16417, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:50:28.761678 IP (tos 0x0, ttl 49, id 16419, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:52:04.093668 IP (tos 0x0, ttl 49, id 16421, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:52:04.093678 IP (tos 0x0, ttl 48, id 16421, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > WEBSERVER.http: P 1589600741:1589600861(120) ack 2950613896 win 23 10:52:04.291021 IP (tos 0x0, ttl 49, id 16423, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x25d3 (correct), ack 217 win 27 10:52:04.291028 IP (tos 0x0, ttl 48, id 16423, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > WEBSERVER.http: ., cksum 0x7b91 (correct), ack 217 win 27 10:52:04.300708 IP (tos 0x0, ttl 49, id 16425, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x253c (correct), ack 368 win 27 10:52:04.300714 IP (tos 0x0, ttl 48, id 16425, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > WEBSERVER.http: ., cksum 0x7afa (correct), ack 368 win 27 10:52:04.301417 IP (tos 0x0, ttl 49, id 16427, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: F, cksum 0x253b (correct), 120:120(0) ack 368 win 27 10:52:04.301438 IP (tos 0x0, ttl 48, id 16427, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > WEBSERVER.http: F, cksum 0x7af9 (correct), 120:120(0) ack 368 win 27 10:52:04.498875 IP (tos 0x0, ttl 49, id 16429, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x253a (correct), ack 369 win 27 10:52:04.498881 IP (tos 0x0, ttl 48, id 16429, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > WEBSERVER.http: ., cksum 0x7af8 (correct), ack 369 win 27

  Read the article

• Sleep/Suspend and WOL on FreeNAS

  - by Timothy R. Butler

  I am trying to figure out how to get FreeNAS 8 to sleep when inactive and, ideally, wake on lan activity (or, less ideally, wake on a WOL magic packet). However, as I've tried to search for information on how to do this, almost all discussions seem to be centered on FreeNAS 7. Also, the tools included in FreeBSD to do this seem to be missing (i.e. acpiconf, etc.). Is there a way to get FreeNAS 8 to sleep and wake so that I don't have to leave the server running all the time? Given its usage level, it seems a waste to have the server running constantly.

  Read the article

• Understanding how Tracert works

  - by iridescent

  From what I gathered so far, Tracert works by sending 3 ICMP echo messages. Starting with a TTL value of 1. For each router the packet encounters, the TTL value will be decremented. For the 1st router, 1-1 = 0, so an ICMP "time exceeded" message will be sent back to the sender machine. Next, the TTL value will be incremented to 2 by the sender machine and the cycle repeats for the 2nd router (2--1--0) and so on. Please correct me if my undestanding is flawed. I am curious as to why the ICMP "time exceeded" message isn't displayed by Tracert in Command Prompt since it is in fact an error message ? The cycle simply proceeds on. Thanks.

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >