Search Results

Search found 1862 results on 75 pages for 'stuart brand'.

Page 38/75 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

  • Ubuntu 9.10 LiveCD stalls after "Install Ubuntu" selected from boot menu on eMachines

    - by nicorellius
    I am trying to install Ubuntu 9.10 from the ISO on a CD (it needs to be this version) on an eMachine with a brand new Seagate hard disk. The CD boots OK, and I choose the language. Then I am presented with the boot menu: Try Ubuntu Install Ubuntu etc I have tried the top two choices several times (trying Ubuntu and installing it), but each and every time the installation stalls and the disc stops spinning right after I hit enter after choosing the option I want. I have tried different CD/DVD drives, changing the jumpers on both CD drives, different hard drives, and nothing works. Maybe there is a BIOS setting that is choking the installation? Any help would be appreciated. Edit - I just tried running the hard drive as the master on the primary IDE and the CD drive as the slave on the primary with the same results. Maybe flash the BIOS?

    Read the article

  • Jungledisk - choosing between Amazon S3 and Rackspace ?

    - by Dietmar
    Hi, jungledisk is owned by rackspace and offers an option to choose Amazon S3 which charges for traffic whereby if data is stored on rackspace, no charges for traffic. For a small company, to just backup files with jungle disk from ubuntu linux OS computers, i wonder what to choose. Commercial psychologically the price on traffic and the Amazon brand make it appear or maybe it is, of better quality than the cheaper Rackspace offer which is when it comes for just backing up ok ? but if its about backing up around 30 GB which updates from time to time, what would you consider a good choice ?

    Read the article

  • Re-Calibrate Toshiba battery meter with Windows 7

    - by Farseeker
    Hi All. I have a Toshiba U300 laptop. Back in the olden days (circa-2000) you could re-calibrate the battery meter from the BIOS when your battery was no longer reading accurately. My battery was shot, so I bought a brand new one, however Windows 7 still seems to count down the battery life in at the same speed as the old one did. This time, when it alleged 0%, I turned the laptop back on and got another 90 minutes of life out of it, at 0%. Is there a tool or utility for Toshiba laptops that can fix it back to being accurate? I've read the other threads on SU about cycling the battery but that just doesn't seem to do it in this case. Update: After the last cycle, the battery meter now reads 100% but the indicator on the front of the laptop is still orange (indicating not fully charged)

    Read the article

  • Time machine link error

    - by robinjam
    When attempting to perform a Time Machine backup, the backup appears to proceed as normal, until it finishes copying files at which point it complains that an "error occurred while linking files for" one of my external hard disks. During the previous backup that particular disk was in fact empty, and therefore I can't understand why Time Machine is attempting to link back to it. But alas. I've verified all my disks using Disk Utility and they all appear to be fine. Does anybody know what causes this error, and how I might go about fixing it? Failing that is there a way to force Time Machine to create a brand new backup rather than an incremental one? Thanks in advance!

    Read the article

  • Snow Leopard crashes my Xerox printer

    - by Ho Li Cow
    Just set up 2 brand new iMac 21.5" with OS X 10.6.2 pre-installed in our office. Now whenever we try to print an e-mail out, it re-sets the printer i.e. it switches off, does a POST and prints out a Printer Config page. I can print web pages and from other apps fine, just Apple Mail seems to be suffering. Printer is a Xerox Phaser 7750. I downloaded the drivers it recommended when i first tried printing which didn't help and then also tried downloading from the Xerox site. The latter seemed to install fine but then right at the end, it would say 'Installation Successful', then ask me to choose a printer (it found it fine, both by Bonjour and Raw TCP - i tried both) and then it would give an error message. Any help appreciated.

    Read the article

  • Converting PDF eBooks into a Kindle format

    - by Ender
    Over the past couple of years I've amassed quite a collection of guides, tutorials and ebooks in PDF format. A lot of these are quite useful for work, especially PDF documentation, and rather than have to be at a computer every time I want to read how to do something in Sitecore or to read through a software testing ebook I'd like to do it on my brand-spanking-new Kindle. However, even though there is now a native PDF reader on the Kindle due to the nature of PDF's they are practically unreadable. The text doesn't wrap due to how PDF's are sized and so far after a bunch of Google searches I've yet to find a viable solution to get my PDF's converted into a readable Kindle format. Sometimes these books have code or pictures/tables in them, but most of the time they're text-heavy and to be honest I'd be surprised if there wasn't a free tool to handle the converting of PDF to one of the (seemingly many) Kindle formats. So, can anyone help me out with this?

    Read the article

  • Will disabling NAT on my wireless router cause a performance hit on my DSL router?

    - by user117313
    I have a Thomson TG508v2 router/modem and a brand new AirPort Extreme connected to it. At first, I set the AirPort Extreme to "share a public IP", which enables DHCP/NAT. Everything works great but I was having the Double NAT error. So I set the AirPort Extreme as bridge mode, which disables DHCP/NAT and let my crappy modem handle my internal network IPs. Will this cause any performance hit in my network? I'm worried because I'll outsource this job from AirPort Extreme (premium hardware) to the crappy modem. Before you suggest, I tried setting my modem as a bridge and configuring PPPoE on the AirPort Extreme, however it wouldn't connect to the internet, so I just dismissed leaving the modem as bridge.

    Read the article

  • Win8 ASUS R503 - My PS/2 touchpad will not allow me to update to the required 8.0.5.0 version

    - by William Cha
    Details: Brand: ASUS Manufacturer: Toro Model: R503U Attemps: Fn+F9 does not work Cannot update from the 6.--(whatever version) to 8.0.5.0. Pros: 8.0.5.0 Allows Fn+F9 to function, which allows quick touchpad disabling. Cons: Cannot update; "Your driver is up to date." I want to play and type on this notebook laptop without excessive palm strokes on the touchpad. I have that name there, showing that this is a touchpad (PS/2) I do not want nor want to use. Does anybody have a good solution to this problem?

    Read the article

  • Reliable 1tb or larger hard drive?

    - by jasondavis
    I am in the market for 2-3 new drives, I would like each to be at least 1tb to 2tb in size. I have been reading all the reviews on newegg.com for 1tb and larger drives and they all have 1 thing in common. Almost all the ones I read about have complaints of them being DOA or dieing within a few weeks of use. I am hoping to find some drives with this storage range that have a reputation for lasting a long time instead of a short life. Please help me if you have any experience with these sort of drives? Most the ones I read about were Western Digital brand. I realize some might complain that this questions answer would be based upon a timeframe, so if a user searches and find this answer a year from now it will be outdated but I would appreciate any help based on the current hard drives available as of April 10th, 2010 on newegg.com

    Read the article

  • Machine only responds to network requests from machines it is pinging

    - by ILikeFood
    I have two machines. WOPR: Ubuntu server edition 10.10 LTS 32 bit Adam Selene: Windows 7 home premium 64 bit / Ubuntu Desktop 10.10 LTS 64 bit I want to be able to SSH from Adam Selene to WOPR, so I connect them to the same network. Here's where things get weird. I cannot connect to WOPR in any way under normal circumstances. But, if WOPR is pinging Adam, then it starts responding to ping requests, HTTP gets, and SSH tunnels. I'm an amateur, and brand new to Ubuntu server, so I suspect there's a misconfiguration somewhere, but there's an off chance it's a bug in the OS. Does anyone know what might cause this behavior? Thanks a lot!

    Read the article

  • attach two hdds to a computer having 500W smps

    - by Gaurav Sharma
    I have a desktop system installed with a 250 GB hdd (seagate sata II) this system is having a power supply of 500W (not sure if it is 650W but not more than that) the power supply is a local brand. Will it be safe to attach a second 250 GB sata II hdd on the same system. Safe in the sense that the system may not fall short of power at any time. My system's config is as follows Core2Duo processor Mercury cabinet having an additional fan (small one) sata dvd writer 52X windows xp sp 2 ASUS motherboard (intel G965 express chipset) If the above specified power supply is not sufficient for above configuration of system then please suggest the appropriate power supply (including watts)

    Read the article

  • Is there any Mac Pro hardware parts that can ONLY be purchased thru Apple?

    - by bigp
    I'd like to know if I need to be concerned about any hardware parts that I should include in a brand new Mac Pro purchase, instead of trying to hunt it down on 3rd party vendors (or whitelist vendors / hardware suppliers). The main components I'm interested for "upgradeability" are: Processors (If starting with Two 2.4GHz Quad-Core "Westmere"); RAM (If starting with the least possible, which seems to be 6 x 1GB); Video Cards (If starting with one ATI Radeon HD 5770, can a 2nd one be purchased elsewhere?) Hard-Drives (Since these are mounted in specialized trays [if I'm not mistaking], are they also sold elsewhere? And can they be bought as SSDs?) Power Supply (Do I need to be concerned about this at all, or does it auto-adjust depending on the new component upgrades?) I just want to be sure by choosing a Mac Pro with lower component specifications that I can in fact purchase upgrade parts cheaper elsewhere. Thanks!

    Read the article

  • Windows 7 sata disk not recognized after wake up from sleep state [closed]

    - by Gabber
    My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results.

    Read the article

  • Can't run .net software on Samsung Omnia Pro B7330

    - by Sam
    I've got a Samsung Omnia Pro B7330, and am unable to run any program for .net compact framework on it. My last three Smartphones had been HTC brand, and all the programs I tried are just simple winform apps, which ran on all HTC phones. But not on the Omnia. Whenever I try to start an app, I get an "unexpected error" / "NotSupportedException" at: Microsoft.AGL.Common.MISC.HandleArt() System.Windows.Forms.Control._InitInstalce() System.Windows.Forms.Control..ctor() System.Windows.Forms.Button..ctor() MyApp.InitializeComponents() The proper compact framework 2.0 is already installed in the rom, installing CF 3.5 didn't change anything. Anyone can tell me whats the problem with this phone?

    Read the article

  • Windows 7 sata disk not recognized after wake up from sleep state

    - by Gabber
    My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results. I also tried all the suggestions from this question Why doesn't Windows 7 wake up from sleep?. Still no results.

    Read the article

  • HP Z210 SFF: two different video cards produce no Displayport output when installed

    - by ConcernedOfTunbridgeWells
    I have a HP Z210 SFF that I'm trying to install a video card into. I've tried two different cards in Slot 2 (a Quadro FX380LP and a Quadro 600). Neither of these cards produce a displayport signal when installed. With neither installed the displayport port on the motherboard works fine with the built in graphics. When I install the cards it produces no signal and the cards don't either. The Quadro 600 is brand new and the odds of having two dead video cards is quite low. Is there something fundamental that I could be missing out - a BIOS setting maybe?

    Read the article

  • Cross-Forest Trust

    - by cdalley
    I am looking at testing a cross-domain trust we can have two domain controllers (with different forests and domain names) setup so we can move everyone onto the new domain. We do NOT run exchange on site and we do not have any links to O365 to AD currently. Onto the problem: I have setup two DCs in a Virtual Machine: They are on the same network 192.168.0.* The Windows 2003 server: Name: OLDSRVR "Clone" of our current Domain Controller IP: 192.168.0.1 Domain: internal.test.com The Windows 2012 server: Name: ADCTEST01 Brand new domain setup from scratch separate to internal.test.com Domain: internal.test2.com IP: 192.168.0.2 OLDSRVR can only see ADCTEST if it has dynamic IP set. If I set a static IP it cannot see it. If I try using the dynamic IP and try to join it gets to the end then complains "??The trust relationship between this workstation and the primary domain failed" Any ideas?

    Read the article

  • CPU fan making noise. heat sink or replace...

    - by user32185
    CPU fan is making noise ...i figured out reasons: Cable is hitting the fan causing a vibration. And may be also CPU fan is loose causing vibration... suggest options... i cleaned the fan ...but found that there is no heatsink compound /paste between processor and the fan..is it ok ..should i apply heat sink compound. How to correct the cable vibration... My processor is p4 2.4 ghz motherboard intel 845gvsr if i have to buy new fan ..which brand should i go for ..and estimated cost ?!

    Read the article

  • HDMI connection does not support HDCP

    - by mroggi
    Hi, My problem: error message when playing blu-ray movies stating that the HDCP encryption could not be established. My setup: A new projector (EPSON EMP TW700) with a HDCP-compliant HDMI port a PC with a brand-new graphics adapter (Sapphire HD 4350 512MB DDR2) supporting HDCP Connection made with a DVI cable (it's installed in my wall) and a DVI-HDMI adapter to connect the projector Latest drivers and software My questions: What can I do to establish the HDCP connection? Would it help to use the HDMI output of the graphics adapter instead of the DVI (could it be that the HDCP chip is only supported on HDMI?) Any other ideas? I am very thankful for any hint.

    Read the article

  • Help accessing Beagle over serial with Minicom/GTKTerm

    - by mrgordon
    I am trying to access a brand new Beagle Board from Ubuntu or Mac over serial using the setup seen here: http://specialcomp.com/beagleboard/RevC1.htm I got Minicom and GTKTerm installed on the Ubuntu box. I set up the correct baud rate, turned off flow control, and have tried ttyUSB0 and ttyS0. Once minicom is configured properly, I should just see the init text from the board appear if I have minicom open in terminal while I plug in the board, correct? dmesg shows ttyUSB0 on the computer has been connected to ttyS0 on the beagle.

    Read the article

  • How can I check the location of perl and CPAN files?

    - by Rob
    I constantly have to set up new servers for an employer of mine for an exact purpose of his, and as such they all have to be set up in exactly the same way. So I've created a script in PHP that I run from my own box to automatically send over all the relevant files, compile everything, run updates, and everything else. However, for some reason these brand new servers come with perl, which is fine, but they have perl installed in different locations. This makes it a pain for me to copy over Config.pm for CPAN without going in and finding the location manually. Is there perhaps some command I'm unaware of that will hunt down the precise location? If it helps, usually the servers are CentOS 5

    Read the article

  • HD read error while booting linux

    - by sidharth sharma
    I have been dual booting windows 7 and ubuntu on my laptop since the past 3 years and all was working fine until I started getting logs like ata1.00: status: { DRDY ERR } ata1.00: error: { UNC } ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense key: Medium Error [Current][discreptor] I figured it was a hardware problem and ignored it as long as I could until the HD crashed on me. Then I got a brand new HD and put on windows and ubuntu afresh on it but the problem still persists. Any Help?

    Read the article

  • Intel RAID0 on Windows 8 not Displaying Correct Media Type

    - by kobaltz
    I have my primary C Drive which consists of 2 Intel 120GB SSD Drives in a RAID0. I have a clean install of Windows 8 Pro, latest MEI software, latest RST software, latest Intel Toolbox. Prior to this I had installed Windows 8 Pro as an upgrade. When I went into the Optimize Drives while in the Upgrade installation, it showed the Media Types as Solid State Drives. However, now since I am in a brand new install, it is showing the Media Type as Hard Disk Drive. I am worried about this because of the trim not working properly. Before when in the upgrade, it showed SSD as the media type and the Optimize option would perform a manual trim. Unfortunately, my search credentials on Google are so common to many other things (ie Raid0, SSD, Windows 8, Media Type) that all I am finding are useless topics. Before, (found on random site) it showed the Media Type as below

    Read the article

  • Burn iTunes playlist to Audio Image

    - by MikeHoss
    I have Snow Leopard on an early model MacBook Pro. The CD Drive has been giving me fits the last few months -- I stick a blank CD in it, and it claims it's bad and spits it out. I can go through a pile of brand-new CD's and it will choose 1 out of 7 that it wants to use, even though all the CD's come from the same package. The rejected CD's work fine on a Linux machine I have. I need to burn an audio CD from iTunes and my thought was: Burn playlist to audio CD Image file (Red Book image?) Copy ISO file to Linux Machine Use Linux machine to burn audio image to a CD But looking around, it doesn't seem that iTunes on OSX will support this. I was wondering if anyone else has accomplished this.

    Read the article

  • Problems with Black Box KVM

    - by MrWizard54
    I just recieved a shipment of equipment orderd by my predicessor that includes brand new Dell Optiplex 990 computers, with standard mice and keyboards. Also included were Black Box ServSwitch Secure KVMs. I've worked with KVMs before and hypothetically they should be the easiest thing in the world to deal with, plug it all together, push the button, go. However, for the life of me I can't get the computers to recognize the mouse or keyboard when plugged into the KVM. We've seen this with multiple KVMs across the order. Any one know what I'm missing? Computers are all Dell 990 with Windows 7.

    Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >