Search Results

Search found 5256 results on 211 pages for 'trace flag'.

Page 38/211 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• What do I do when I get a Linux kernel bug?

  - by raldi

  I just bought a tiny computer called a fit-pc2 which came with a somewhat customized Ubuntu 9.10 installation. uname -a reports: Linux 2.6.31-34-fitpc2 #7 SMP Thu Apr 22 17:43:26 IDT 2010 i686 GNU/Linux It seems that after several hours of running with heavy network load, all networking ceases and I get the following in kern.log: BUG: unable to handle kernel paging request at ff09dfc0 IP: [<c0150300>] kthread_should_stop+0x10/0x20 *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb1/idVendor Modules linked in: binfmt_misc ppdev sbc_fitpc2_wdt snd_usb_audio snd_usb_lib i2c_isch sch_gpio snd_seq_dummy snd_hda_intel snd_pcm_oss snd_seq_oss snd_seq_midi snd_rawmidi snd_mixer_oss snd_seq_midi_event snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device iptable_filter ip_tables x_tables snd_hwdep lpc_sch snd psmouse rt2860sta(C) uvcvideo video pl2303 soundcore mfd_core output videodev v4l1_compat lirc_igorplugusb lirc_dev serio_raw lp parport usbhid r8169 mii iegd_mod drm agpgart Pid: 16, comm: kblockd/1 Tainted: G C (2.6.31-34-fitpc2 #7) SBC-FITPC2 EIP: 0060:[<c0150300>] EFLAGS: 00010246 CPU: 1 EIP is at kthread_should_stop+0x10/0x20 EAX: ff09dfc4 EBX: c180cbac ECX: 0109d000 EDX: f709df98 ESI: f709df98 EDI: c180cba0 EBP: f709dfb8 ESP: f709df90 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process kblockd/1 (pid: 16, ti=f709c000 task=f7084b60 task.ti=f709c000) Stack: c014c14d c180cba4 00000000 f7084b60 c0150770 f709dfa4 f709dfa4 f7023ef4 <0> c180cba0 c014c0d0 f709dfe0 c015047c 00000000 00000000 00000000 f709dfcc <0> f709dfcc c0150400 00000000 00000000 00000000 c0103ce7 f7023ef4 00000000 Call Trace: [<c014c14d>] ? worker_thread+0x7d/0xe0 [<c0150770>] ? autoremove_wake_function+0x0/0x40 [<c014c0d0>] ? worker_thread+0x0/0xe0 [<c015047c>] ? kthread+0x7c/0x90 [<c0150400>] ? kthread+0x0/0x90 [<c0103ce7>] ? kernel_thread_helper+0x7/0x10 Code: a6 8b 55 0c 8d 4d e0 89 f8 89 34 24 e8 7a fd ff ff 89 c3 eb 92 90 90 90 90 90 90 55 64 a1 00 80 76 c0 8b 80 70 02 00 00 89 e5 5d <8b> 40 fc c3 8d b6 00 00 00 00 8d bf 00 00 00 00 55 ba d7 86 62 EIP: [<c0150300>] kthread_should_stop+0x10/0x20 SS:ESP 0068:f709df90 CR2: 00000000ff09dfc0 ---[ end trace 06004df70b9cf435 ]--- BUG: unable to handle kernel paging request at ff09dfc8 IP: [<c0521bc8>] _spin_lock_irqsave+0x18/0x30 *pde = 00000000 Oops: 0002 [#2] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb1/idVendor Modules linked in: binfmt_misc ppdev sbc_fitpc2_wdt snd_usb_audio snd_usb_lib i2c_isch sch_gpio snd_seq_dummy snd_hda_intel snd_pcm_oss snd_seq_oss snd_seq_midi snd_rawmidi snd_mixer_oss snd_seq_midi_event snd_seq snd_pcm snd_timer snd_page_alloc snd_seq_device iptable_filter ip_tables x_tables snd_hwdep lpc_sch snd psmouse rt2860sta(C) uvcvideo video pl2303 soundcore mfd_core output videodev v4l1_compat lirc_igorplugusb lirc_dev serio_raw lp parport usbhid r8169 mii iegd_mod drm agpgart Pid: 16, comm: kblockd/1 Tainted: G D C (2.6.31-34-fitpc2 #7) SBC-FITPC2 EIP: 0060:[<c0521bc8>] EFLAGS: 00010086 CPU: 1 EIP is at _spin_lock_irqsave+0x18/0x30 EAX: 00000100 EBX: ff09dfc8 ECX: 00000286 EDX: ff09dfc8 ESI: f7084b60 EDI: ff09dfc4 EBP: f709dd88 ESP: f709dd88 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process kblockd/1 (pid: 16, ti=f709c000 task=f7084b60 task.ti=f709c000) Stack: f709dda4 c0127c0b 00000082 00000001 ff09dfc4 f7084b60 00000000 f709ddd0 <0> c0137fd2 00000086 f70954c4 00000000 f7098480 f709ddf0 f7094fc0 f7084b60 <0> 00000000 00000009 f709ddf0 c013c3f8 00000001 c1807c60 f709ddf0 f7084b60 Call Trace: [<c0127c0b>] ? complete+0x1b/0x60 [<c0137fd2>] ? mm_release+0x52/0xf0 [<c013c3f8>] ? exit_mm+0x18/0x110 [<c013c6db>] ? do_exit+0xfb/0x2e0 [<c013998a>] ? print_oops_end_marker+0x2a/0x30 [<c0522aab>] ? oops_end+0x8b/0xd0 [<c011eac4>] ? no_context+0xb4/0xd0 [<c011eb1d>] ? __bad_area_nosemaphore+0x3d/0x1a0 [<c0133a56>] ? load_balance_newidle+0x96/0x320 [<c011ec92>] ? bad_area_nosemaphore+0x12/0x20 [<c0524106>] ? do_page_fault+0x2f6/0x380 [<c012cc30>] ? finish_task_switch+0x50/0xe0 [<c0523e10>] ? do_page_fault+0x0/0x380 [<c0522006>] ? error_code+0x66/0x70 [<c0523e10>] ? do_page_fault+0x0/0x380 [<c0150300>] ? kthread_should_stop+0x10/0x20 [<c014c14d>] ? worker_thread+0x7d/0xe0 [<c0150770>] ? autoremove_wake_function+0x0/0x40 [<c014c0d0>] ? worker_thread+0x0/0xe0 [<c015047c>] ? kthread+0x7c/0x90 [<c0150400>] ? kthread+0x0/0x90 [<c0103ce7>] ? kernel_thread_helper+0x7/0x10 Code: 00 00 00 55 89 e5 f0 83 28 01 79 05 e8 02 ff ff ff 5d c3 55 89 c2 89 e5 9c 58 8d 74 26 00 89 c1 fa 90 8d 74 26 00 b8 00 01 00 00 <f0> 66 0f c1 02 38 e0 74 06 f3 90 8a 02 eb f6 89 c8 5d c3 90 8d EIP: [<c0521bc8>] _spin_lock_irqsave+0x18/0x30 SS:ESP 0068:f709dd88 CR2: 00000000ff09dfc8 ---[ end trace 06004df70b9cf436 ]--- Fixing recursive fault but reboot is needed! This seems to happen at least once a day. How do I even begin to debug this?

  Read the article

• Linux Kernel crash mutex_lock_slowpath "blocked for more than 120 seconds". What to do?

  - by Roddick

  I have out-of-the box Debian Lenny with non-custom kernel 2.6.26-2-amd64. Brand new server that is used to 5% of it's potential, CPU and Disk-wise. Meaning it probably not crashing because of overload. every few days it freezes with hundreds of these messages in console log: : [284847.828428] INFO: task apache2:12473 blocked for more than 120 seconds. : [284847.868468] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. : [284847.912759] apache2 D ffff8101bc6b7ab0 0 12473 14358 : [284847.912763] ffff810160d5bc50 0000000000000082 ffff8101c0002e40 0000000000000000 : [284847.912766] ffff8101a7c42950 ffff810327d92810 ffff8101a7c42bd8 0000000400000044 : [284847.912770] ffff8101c0002e40 00000000000612d0 0000000000000000 00000040000612d0 : [284847.912773] Call Trace: : [284847.912786] [<ffffffff80429b0d>] __mutex_lock_slowpath+0x64/0x9b : [284847.912790] [<ffffffff80429972>] mutex_lock+0xa/0xb : [284847.912794] [<ffffffff802a20b9>] do_lookup+0x82/0x1c1 : [284847.912800] [<ffffffff802a4271>] __link_path_walk+0x87a/0xd19 : [284847.912805] [<ffffffff80295844>] kmem_getpages+0x96/0x15f : [284847.912808] [<ffffffff80295fb7>] ____cache_alloc_node+0x6d/0x106 : [284847.912814] [<ffffffff802a4756>] path_walk+0x46/0x8b : [284847.912819] [<ffffffff802a4a82>] do_path_lookup+0x158/0x1cf : [284847.912822] [<ffffffff802a3879>] getname+0x140/0x1a7 : [284847.912827] [<ffffffff802a53f1>] __user_walk_fd+0x37/0x4c : [284847.912831] [<ffffffff8029e381>] vfs_lstat_fd+0x18/0x47 : [284847.912840] [<ffffffff8029e3c9>] sys_newlstat+0x19/0x31 : [284847.912848] [<ffffffff8020beda>] system_call_after_swapgs+0x8a/0x8f Almost all traces has __mutex_lock_slowpath as top-level. Only some has different trace: : [284847.737386] INFO: task apache2:12472 blocked for more than 120 seconds. : [284847.777551] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. : [284847.824881] apache2 D ffff8101bc6b7ab0 0 12472 14358 : [284847.824886] ffff8101b9cc1c50 0000000000000086 ffffffffa0131e0a 0000000000000002 : [284847.824889] ffff8102e7454300 ffff810324c6cad0 ffff8102e7454588 0000000000000000 : [284847.824893] 0000000000000001 0000000000000296 0000000000000003 ffff8101b9cc1c58 : [284847.824896] Call Trace: : [284847.828403] [<ffffffffa0131e0a>] :ext3:__ext3_journal_dirty_metadata+0x1e/0x46 : [284847.828412] [<ffffffff80429b0d>] __mutex_lock_slowpath+0x64/0x9b : [284847.828418] [<ffffffff80429972>] mutex_lock+0xa/0xb : [284847.828421] [<ffffffff802a20b9>] do_lookup+0x82/0x1c1 : [284847.828427] [<ffffffff802a4271>] __link_path_walk+0x87a/0xd19 : [284847.828428] [<ffffffff80271296>] find_lock_page+0x1f/0x8a : [284847.828428] [<ffffffff80273182>] filemap_fault+0x1c2/0x33c : [284847.828428] [<ffffffff802a4756>] path_walk+0x46/0x8b : [284847.828428] [<ffffffff802a4a82>] do_path_lookup+0x158/0x1cf : [284847.828428] [<ffffffff802a3879>] getname+0x140/0x1a7 : [284847.828428] [<ffffffff802a53f1>] __user_walk_fd+0x37/0x4c : [284847.828428] [<ffffffff8029e381>] vfs_lstat_fd+0x18/0x47 : [284847.828428] [<ffffffff8029e3c9>] sys_newlstat+0x19/0x31 : [284847.828428] [<ffffffff8020beda>] system_call_after_swapgs+0x8a/0x8f kernel: [1912668.466347] INFO: task apache2:17984 blocked for more than 120 seconds. [1912668.507035] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. : [1912668.555165] apache2 D ffff8101c5637ba0 0 17984 17282 : [1912668.596752] ffff810166a7dd30 0000000000000086 0000000000000000 ffff810166a7dcd8 : [1912668.643341] ffff8101c563c880 ffff81024505f000 0000000000000002 ffff810166a7dd68 : [1912668.699566] 0000000000000086 00000000000cb1a0 0000000000000000 ffff81017f344d60 : [1912668.744773] Call Trace: : [1912668.761754] [<ffffffff8022a3ed>] pick_next_task_fair+0x6e/0x7a : [1912668.829311] [<ffffffff802be0e2>] bio_alloc_bioset+0x89/0xd9 : [1912668.861930] [<ffffffff8024ac3a>] getnstimeofday+0x39/0x98 : [1912668.897005] [<ffffffff802710f6>] sync_page+0x0/0x41 : [1912668.927868] [<ffffffff80429487>] io_schedule+0x5c/0x9e : [1912668.960286] [<ffffffff80271132>] sync_page+0x3c/0x41 : [1912668.991756] [<ffffffff804295fa>] __wait_on_bit_lock+0x36/0x66 : [1912669.031757] [<ffffffff802710e3>] __lock_page+0x5e/0x64 : [1912669.064191] [<ffffffff802461d3>] wake_bit_function+0x0/0x23 : [1912669.100100] [<ffffffff80281bc5>] handle_mm_fault+0x5e4/0x8de : [1912669.134531] [<ffffffff802461a5>] autoremove_wake_function+0x0/0x2e : [1912669.174623] [<ffffffff802aa108>] fcntl_setlk+0x1cf/0x291 : [1912669.210623] [<ffffffff802461a5>] autoremove_wake_function+0x0/0x2e : [1912669.246923] [<ffffffff802a677f>] sys_fcntl+0x280/0x2f7 After googling for "mutex_lock_slowpath" I can only find the Kernel mailing list discussions that this issue was introduced in some commit. Wthout reference to verison. Discussions as recent as Jan 25, 2011. The Kernel I am using is form Debian Lenny, year ago. What should I do? Is this bug even fixed in kernel? if it's such obvious bug why it happens so rarely? Should I download latest kernel from kernel.org and upgrade? Should I use Debian backports to install new "Approved" kernel? Am I missing something? What to do?

  Read the article

• error while adding web service to server in website panel

  - by sam

  I got following error while creating website for user in website panel.I am not able to create any hosting space in server's hosting plan it is showing 0 mb space. Stack Trace: [SoapException: System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.UriFormatException: Invalid URI: The Authority/Host could not be parsed. at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind) at System.Uri..ctor(String uriString) at Microsoft.Web.Services3.WebServicesClientProtocol.set_Url(String value) at WebsitePanel.Server.Client.ServerProxyConfigurator.Configure(WebServicesClientProtocol proxy) at WebsitePanel.EnterpriseServer.ServiceProviderProxy.ServerInit(WebServicesClientProtocol proxy, ServerProxyConfigurator cnfg, String serverUrl, String serverPassword) at WebsitePanel.EnterpriseServer.ServiceProviderProxy.ServerInit(WebServicesClientProtocol proxy, ServerProxyConfigurator cnfg, Int32 serverId) at WebsitePanel.EnterpriseServer.ServiceProviderProxy.Init(WebServicesClientProtocol proxy, Int32 serviceId) at WebsitePanel.EnterpriseServer.WebAppGalleryController.InitFeedsByServiceId(Int32 UserId, Int32 serviceId) at WebsitePanel.EnterpriseServer.esWebApplicationGallery.GetGalleryApplicationsByServiceId(Int32 serviceId) --- End of inner exception stack trace ---] System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1485877 System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +221 WebsitePanel.EnterpriseServer.esWebApplicationGallery.GetGalleryApplicationsByServiceId(Int32 serviceId) +68 WebsitePanel.Portal.WebAppGalleryHelpers.GetGalleryApplicationsByServiceId(Int32 serviceId) +31 can anybody help me in this.

  Read the article

• Minutely cron, ensuring only a single instance

  - by Christopher Nadeau

  Is there a way to run a script every minute (or 2, or 5, etc), but only if it isn't already running? We have a set of scripts that need to run every minute. Sometimes they might start and finish in a second, other times they might go on for 5 minutes. Our current way of avoiding simultaneous executions is by setting a is_running flag in each script, and exiting if it's still enabled. But this is a little unreliable (i.e., fatal errors would cause the flag to remain enabled even after the script halted). We could write our own little manager, but I'm wondering if there is a more fashionable solution that already exists.

  Read the article

• Cannot set target directory when extracting an archive using tar

  - by palto

  I'm trying to extract a tar archive to a specific directory. I've tried using -C flag but it doesn't work as expected. Here is the commandline I'm using tar xvf myarchive.tar -C mydirectory/ This gives me a following error: tar: file -C: not present in archive tar: file mydirectory/: not present in archive I've also tried setting the -C flag before the archive file but it just says this: tar xvf -C mydirectory/ myarchive.tar tar: -C: No such file or directory What am I doing wrong? EDIT: tar -tf shows that the tar archive does not have full path names: tar -tf myarchive.tar herareport/ herareport/bin/ ...

  Read the article

• How can I sort du -h output by size

  - by Tom Feiner

  I need to get a list of human readable du output. However, du does not have a "sort by size" option, and piping to "sort" doesn't work with the human readable flag. For example, running: du | sort -n -r Outputs a sorted disk usage by size (descending): du |sort -n -r 65108 . 61508 ./dir3 2056 ./dir4 1032 ./dir1 508 ./dir2 However, running it with the human readable flag, does not sort properly: du -h | sort -n -r 508K ./dir2 64M . 61M ./dir3 2.1M ./dir4 1.1M ./dir1 Does anyone know of a way to sort du -h by size?

  Read the article

• Tune SQL Server Express using Profiler?

  - by Glen Little

  I have a SQL Server 2005 database... a copy of it is running in development on a full version of SQL server. Another copy is running in SQL Server 2005 Express on a web server. I've used SQL Profiler and saved a Tuning trace log from activity on the SQL Express copy of the database. I want to use the saved trace log in the Database Engine Tuning Advisor... If I try when connecting the Advisor to the Express database, I am told that Express is not supported. If I try when connecting the Advisor to the SQL Server database, I get empty results. Is there any way to do this?

  Read the article

• Windows XP does not list WPA wireless networks

  - by Tomalak

  What can be the reason that Windows XP does not show WPA-encrypted wireless networks? The laptop I have problems with is an older model (Toshiba Satellite Pro 6100) with Windows XP SP3 on it, fresh install. The wireless network card in it is an Agere product that lists as "Toshiba Wireless LAN Mini PCI Card". The networks showed up perfectly before I first tried to connect to one (it was set to WPA2). The connection failed (the card supports WPA only), then something must have happend and Windows hides these networks now. A manually configured WPA setup via Windows' own wizard works, I'm using it right now. The network just won't show up in the list of available network on its own. I suspect that XP incorrectly set a flag somewhere that this network card does not support WPA. Is there such a flag, and if so, how can I change it back?

  Read the article

• What causes Windows Boot to stall?

  - by Nick Berardi

  For about 6 months now I have been having this weird problem where Windows 7 fails to fully boot correctly. What happens is this. Starting Windows shows up on the screen. Then 3 out of 4 times nothing else happens, no Windows Flag animation, just nothing occurs. After 3 or 4 restarts repeating steps 1-2 above, the Windows Flag animation finally shows up and everything works as expected. My question is what is causing this problem in steps 1 and 2? Because I have tried the following with no luck: Error checking and correcting of any disk errors Updating drivers Doing a clean install of Windows 7 My setup is as follows: Windows 7 64-bit Ultimate 8 GB RAM 128 GB Crucial SSD (firmware 0005) Dell Latitude E6410 Intel Wireless and Graphics Other than what I have tried above I am totally out of ideas and looking for some new ones to try.

  Read the article

• Getting error code -41 when copying files to external drive

  - by diego

  I'm having trouble copying some files from my mac to an external hard drive: I keep getting the nondescript "error code -41". I noticed some of the files with an additional "@" permission bit had the "com.apple.quarantine" flag set. I used the "xattr" command from this article What should I do about com.apple.quarantine? to take care of the quarantine flag and sort that out (these files were copied over from another mac on my network, so I guess OS X flagged them as quarantine). That took care of the problem for those files but I still have some that I can't manually copy over to the external drive. The only other thing I've noticed is that some of these files have a an extra permission bit: "drwxr-xr-x+" which I haven't been successful in googling. Aside from that I don't see anything else. Also, Disk Utility says everything's fine. Any help would be greatly appreciated.

  Read the article

• Sharing wireless internet connection between 2 Ubuntu 10.04 systems using cross-over cable

  - by Gary

  I have a Lenovo T60 with Ubuntu 10.04 connected with a cross-over cable to a Dell Vostro 1400, also running Ubuntu 10.04. My internet is coming into the Lenovo through an external wireless antennae, and I want to share the internet with the Dell. On the Lenovo: eth0 connection has IPv4 Settings 'Shared to other computers' I can ping the Dell (10.42.43.10) successfully I can use mtr to trace to www.google.com successfully On the Dell: eth0 connection has IPv4 Settings 'Automatic DHCP' I can ping the Lenovo (10.42.43.1) successfully when I use mtr to trace to www.google.com, I can only reach 10.42.43.1 I must be missing some setting, but cannot see what it is; can anyone help me?

  Read the article

• BSOD in nltdi.sys Vista x64

  - by W1N9Zr0

  BSOD caused by NetLimiter's nltdi.sys Error codes vary, but this is pretty constant: SYMBOL_NAME: tdx!TdxSendConnection+2a0 MODULE_NAME: tdx IMAGE_NAME: tdx.sys Stack trace includes: nltdi+0x1144 example

  Read the article

• Finding spoofed IP address on network

  - by Jared

  I have a few IP spoof dropped messages coming out of my Sonicwall firewall, we'll call them Source A and Source B. Both of these sources have the same mac address indicating they're coming from the layer 3 switch behind my firewall. Source A has an ip within a valid subnet on my network and it shows up in the ARP table of my layer 3 switch. I was able to trace the exact location and fix the issue. Source B's ip however, is not within valid subnet on my network and it's not showing up in my layer 3 switches arp table. Any idea how I can trace the location of this device within my network? Thanks in advance.

  Read the article

• Stop WSUS from rebooting a server

  - by sixlettervariables

  Our IT department is rolling out a set of patches via WSUS this weekend and will reboot all of our Win2k3 servers on Sunday. Due to production work which must continue uninhibited, we cannot allow this reboot to occur. The exact line we have been given is: The command to download the patches and reboot on Sunday has been sent by WSUS already and cannot be taken back. The servers will reboot on Sunday automatically. How can we go about stopping this from happening? It set some flag saying it should reboot, so what flag do we unset? One strategy proposed was to roll back the system clock, however, this will likely cause some processes to fail.

  Read the article

• Terminal Server 2003 Performance Troubleshooting

  - by MikeM

  Let me get your thoughts on terminal server performance problems. The server hosts average 25 users which, after running some numbers, on average use 600MB memory with their main applications running (web browser, adobe reader, IP phone client). All users are on the same LAN as server. We constantly experience slow response and short session lockups. Combined CPU usage is on average 10%. What appears strange to me is that the system shows 29GB physical memory with 25GB of it free. The page file usage is about 50% averaging 9GB used. Some server specs OS: Server 2003 32bit Enterprise with /PAE flag RAM: 32GB CPU: 2xQuad Core @ 2.27Ghz HD: RAID5 1.2GB After doing basic troubleshooting using performance monitor it leads me to believe that the performance problems are caused by the 32bit OS limitation in addressing full 32GB of physical memory even though the /PAE flag is used. Can anyone suggest something, troubleshooting steps that can lead to a more conclusive answer? Thanks

  Read the article

• Ubuntu 10.10 and Windows 7 (TrueCrypt) Multi-boot Problems

  - by Samuel Taylor

  I have now been searching days for a solution but have found nothing. I have Ubuntu 10.10 and Windows 7 with TrueCrypt as a multi-boot. It was working fine for a few weeks until I needed to reinstall Ubuntu. If I have the boot flag on the partition where Windows 7 is install (This is where the boot flags was when working before.), it boots fine in to Windows 7 but when pressing Esc it can't find grub2. If I have the boot flag on the partition where Ubuntu is install, it boots fine in to Ubuntu (by pressing Esc or typing the password) but unable to access Windows. I have tried reinstalling TrueCrypt Boot loader and repairing the header but it have no affect. My Partitions: sda1 - Windows 7 Recovery (GRUB2) sda2 - Windows 7 (TrueCrypt Boot Loader) sda3 - Ubuntu 10.10 (/) sda4 - Extended sda5 - Swap sda6 - Ubuntu (/home) Does anyone have any ideas? Thanks Sam

  Read the article

• Creating a Scheduled Task that runs forever on Windows XP

  - by Mike Fiedler

  When I create a scheduled task, I do so via command line: schtasks.exe /Create /TN "startup-script" /TR "C:\startup.bat" /RU taskuser /RP taskpasswd /SC ONLOGON The idea is that this task run forever. The batch opens a java process that is never meant to end. I've used ONLOGON, as the machine auto-logs in as taskuser. All this works fine, for about 72 hours, after which the Duration flag kicks in and ends the process. Windows XP doesn't have the /DU flag on command line - is there an alternative method to creating a task that is meant to run from a system startup (doesn't even require logon) and runs forever, without touching a GUI?

  Read the article

• yum update with shared cache

  - by Sammitch

  We've got a big batch of RHEL6 machines that are due for patching, and for some reason the process here does not involve a local repo. I'm new here, I've asked why, ["it just didn't work"] and I don't have enough time to make it work before the window that's already scheduled. So the usual method is to install yum-downloadonly and run yum update --downloadonly --downloaddir=/mnt/cifs_share and then yum update /mnt/cifs_share/*.rpm which just does not look right to me since not all of these machines have the same set of installed packages. The method I tried today was mounting the share to /var/cache/yum/x86_64/6Server/rhel-x86_64-server-6/packages/ which worked, but then yum automatically deleted everything once it finished. I've looked over the yum man page, but I don't see any flag I can feed it to stop it from deleting everything, nor a flag like up2date's --tmpdir=/mnt/cifs_share. Can anyone out there help me kludge this together until I can get a local repository working?

  Read the article

• OOF (Out of Office) is not working for remote users (Outlook Anywhere)

  - by Doughecka

  I'm not sure how long this issue has been happening, but recently a few of the remote sales users were going to a sales meeting and wanted to set their Out of Office... however in Outlook 2010, they get this error message: "Your automatic reply settings cannot be displayed because the server is currently unavailable" When I run the Exchange Remote Connectivity Analyzer, Autodiscover completes fine, but the next step fails: Exception details: Message: The request failed. The remote server returned an error: (403) Forbidden. Type: Microsoft.Exchange.WebServices.Data.ServiceRequestException Stack trace: at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request) at Microsoft.Exchange.WebServices.Data.MultiResponseServiceRequest`1.Execute() at Microsoft.Exchange.WebServices.Data.ExchangeService.BindToFolder[TFolder](FolderId folderId, PropertySet propertySet) at Microsoft.Exchange.Tools.ExRca.Tests.EnsureEmptyFolderTest.PerformTestReally() Exception details: Message: The remote server returned an error: (403) Forbidden. Type: System.Net.WebException Stack trace: at System.Net.HttpWebRequest.GetResponse() at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse() at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request) I've done some research, but I have yet to find a working fix for this... it seems like some permissions are messed up in IIS, but I haven't figured out what.

  Read the article

• IIS get full error message for failed requests

  - by BetaRide

  I have IIS set-up and serving my webservice. Unfortunately if the webservice throws an exception, all I get is a blue box with the title failed request. What options do I have to actually see what went wrong? I'd prefer to get the exception message and a stack trace. I already set-up "Failed Request Tracing" but the directory remains empty. If possible I'd prefer to get the stack trace in the browser directly. Just if this matters: I have an IIS 7.5 on a Win 7 64 Pro box. The Webservice is a WCF C# project.

  Read the article

• How does one enable --write-mostly with Linux RAID?

  - by user76871

  Unfortunately the mdadm and mdadm.conf man pages are not quite up to par. I would like to enable the --write-mostly flag for my RAID, but neither the man pages nor the internet will tell me how. I am not aware of any place to put default arguments for mdadm, nor aware of when it would be launched and by what. It seems the logical place to add this information is mdadm.conf, but the flag is unmentioned in man mdadm.conf. Where and how can I enable --write-mostly? Thank you.

  Read the article

• Why do I see different TCP behaviour between IIS and FTP server applications on Windows 2003?

  - by rupello

  I am comparing Wireshark traces of a 10MB file download file from: the FileZilla FTP server and IIS (using HTTP) on the same Windows 2003 server. The FTP download performs faster and the trace shows the server behaving as expected, sending more data to the client with every ACK received: Link to full-size image The HTTP server trace shows a more bursty pattern. The timing of the send bursts are sometimes unrelated to any ACKs received from the client (circled in red): Link to full-size image Anyone have a suggestion as to why IIS traffic is having like this? Update: We have tried modifying the http.sys registry settings (setting MaxBytesPerSend to 256k and MaxBufferedSendBytes to 64k as recommended). Changing MaxBytesPerSend does seem to improve performance by increasing the amount of in-flight data , but we still see the same bursty pattern.

  Read the article

• Apache timeouts and error log

  - by BlackFire27

  I have an error whenever I run my code for a certain time. I use a lot of loops and sql connections. I basically, put and take out links from my database. The problem is that there is some error thrown that I cant see, whenever I execute a long sql operation .. Note that the fault isnt the code. The code runs well, whenever there are a few links involved. But when there are over 200 links.. an error is thrown that I cants see. I tried to trace the error in a few places: C:\Program Files\Zend\ZendServer\logs\php_error.log C:\Program Files\Zend\phpMyAdmin\config.inc.php Edit Viewer in win xp I am running XP: Windows xp php version: 5.3.9-ZS5.6.0. Apache/2.2.21 Apacher version: (Win32) mod_ssl/2.2.21 OpenSSL/0.9.8o I cant trace the error at all, and why it happens. All I can suspect of, is that there is a server timeout..

  Read the article

• php apache unknow 500 error

  - by JohnathanKong

  I currently have an error with my apache/php installation on a centos system. I checked the log files in /var/log/httpd and in my logs directory as specified in my virtual host file, but they are not getting populated with errors. I've also set php to log errors, through the php.ini, to the /var/log/httpd/ but the error file is not getting created. When I setup the display_errors = On in the php.ini all I get is a blank screen. this is a git controlled project that is running off of an ubuntu server that works perfectly, so there is something missing from this server. My question is, is there any way I can get more info on the error that I am getting? I just need something that I can trace back. I am using a codeigniter framework, so for me to trace through the code will take days. Thanks!

  Read the article

• How to prevent Windows 8 of erasing GRUB?

  - by dirleyrls

  I'm doing dualboot with Ubuntu and Windows 8 on my DELL Laptop. EFI is enabled, secure boot is not. My partitions are GPT. Everything seems to work for some time. After some normal use, GRUB stops working. The "ubuntu" EFI entry is still there on top of everything else. But the computer boots directly into the Windows Bootloader, skipping GRUB. Any clues on why is that happening or how can I prevent that? My current partiton setup is: - /dev/sda1 NTFS Windows recovery - /dev/sda2 FAT32 UEFI boot (with boot flag) - /dev/sda3 unknown (msftres flag) - /dev/sda4 NTFS Windows Drive C - /dev/sda5 ext4 /home - /dev/sda6 ext4 / I usually reinstall GRUB through chrooting from a Live Session and doing a apt-get install --reinstall grub-efi-amd64.

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >