Search Results

Search found 976 results on 40 pages for 'vms'.

Page 38/40 | < Previous Page | 34 35 36 37 38 39 40  | Next Page >

• Very slow printing from print server

  - by evolvd

  Print server is a VM on Xen The VM is Windows 2003 32bit. During the issue the VM is not being taxed in anyway, cpu, memory, hd read/write, and network speed is all good. The problem that I see is the transfer of the print file from the print server to the printer. The 80Mb file is transferred from the client to the print server in about 2 minutes but then it takes about 2 hours for that file to be sent to the printer. I can't figure out why this would just start to happen. The printer is rebooted every evening and is just used for one large print job in the morning. The server has been rebooted with no effect I changed the spool option to send the entire spool to the server before printing starts and it had no effect. This printer problem did happen to come about after some changes to the Xen environment. The Xen servers changed from using HBA NIC cards to software iscsi and a new switch was put in. I don't think this is related to the problem since all the speeds on the VMs are better now. The changed happened on Saturday and the first print to this printer happened on Monday morning. I'm just putting that out there but like I said I don't think it is related but I don't want to rule it out. At this point I don't have many other options besides the physical layer. I can switch out network cable that goes to the printer and I might be able to print the same job to another printer. I wont be able to test those things out till this afternoon though. Any other ideas or test I could do to try to find the reason for the slow speed? I forgot to say that this is only happening when printing to this one printer. ===Update=== I found out that there are a few printers that currently have this issue, not just the one. There are over 30 printers on the server though so I know it's not happening to all of them. I printed a large pdf doc from the server and it was able to print at the normal speed. If the machine sends the large print request it gets to the server fine but then slow to get from the server to the printer. If sent directly from the printer it gets to the printer at the normal speed. The question now is why is there a speed difference when it comes from the machine and why would it start now?

  Read the article

• Drupal on an NFS share has terrible performance

  - by Marcus

  We have a setup where a Drupal 7 site with the following setup - a VMware ESXi 4.1 host server running a web vm and an NFS VM. The web VM is using Apache and mod_php. The site is still in development thus we have to turn off all forms of caching due to the frequently-updated files. Each page request takes around 15-20 seconds to complete. Profiling the PHP code shows that the vast majority of time (normally over 90%) is taking by all the is_dir(), is_file() function calls that load up the modules. I've increased PHP's realpath cache size to several megs and an strace shows that the lstat calls then drop from over 200 to around 6 and stat() decreases a bit (around 600 calls). However, while this has shaved off quite a bit of time, I am simply unable to break past the 10 second per request barrier. Is there a way to get better performance out of this setup that doesn't involve caching? Configs and stats: VMs: web - Centos 6 64bt, 2.5GB RAM, normal CPU/HD prioritisation nfs - Centos 6 64bt, 2GB RAM, normal CPU priority, high HD priority PHP: 32M realpath cache size (it's this high for testing purposes) NFS: ~]# egrep -v '#|^$' /etc/nfsmount.conf [ NFSMount_Global_Options ] Defaultvers=4 Ac=False Rsize=32k Wsize=32k Bsize=32k Reading speeds via NFS are not an issue a dd of a 100M test file using 32k blocks returns: 3200+0 records in 3200+0 records out 104857600 bytes (105 MB) copied, 1.84984 s, 56.7 MB/s real 0m1.857s user 0m0.007s sys 0m0.330s Strace on Apache process with empty realpath cache: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 50.78 1.157452 337 3434 28 stat 32.58 0.742656 628 1182 425 open 9.29 0.211788 762 278 1 lstat 3.17 0.072322 0 237865 write 2.45 0.055839 490 114 13 access 0.45 0.010262 43 237 brk 0.34 0.007725 10 811 74 read 0.28 0.006340 9 679 fstat 0.22 0.005069 18 281 poll 0.20 0.004533 6 698 getdents 0.09 0.001960 10 190 mmap 0.05 0.001065 14 74 accept4 0.04 0.001000 333 3 chdir 0.03 0.000750 4 190 munmap 0.01 0.000339 0 836 close 0.01 0.000247 3 75 writev 0.00 0.000068 0 611 fcntl 0.00 0.000063 1 77 shutdown 0.00 0.000000 0 1 lseek 0.00 0.000000 0 5 rt_sigaction 0.00 0.000000 0 1 rt_sigprocmask 0.00 0.000000 0 3 setitimer 0.00 0.000000 0 5 socket 0.00 0.000000 0 5 5 connect 0.00 0.000000 0 74 getsockname 0.00 0.000000 0 15 setsockopt 0.00 0.000000 0 5 getcwd 0.00 0.000000 0 1 futex ------ ----------- ----------- --------- --------- ---------------- Strace after realpaths are cached % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 60.14 1.371006 484 2831 28 stat 31.79 0.724705 627 1155 425 open 3.53 0.080354 0 237865 write 2.65 0.060433 530 114 13 access 0.43 0.009913 99 100 brk 0.38 0.008730 11 804 74 read 0.35 0.007910 12 675 fstat 0.30 0.006775 10 654 getdents 0.13 0.003065 11 281 poll 0.09 0.002000 333 6 1 lstat 0.07 0.001545 2 807 close 0.05 0.001063 14 74 accept4 0.04 0.001000 6 179 mmap 0.02 0.000404 2 179 munmap 0.01 0.000271 4 75 writev 0.01 0.000212 0 611 fcntl 0.01 0.000129 2 77 shutdown 0.00 0.000022 0 74 getsockname 0.00 0.000000 0 1 lseek 0.00 0.000000 0 5 rt_sigaction 0.00 0.000000 0 1 rt_sigprocmask 0.00 0.000000 0 3 setitimer 0.00 0.000000 0 3 socket 0.00 0.000000 0 3 3 connect 0.00 0.000000 0 15 setsockopt 0.00 0.000000 0 5 getcwd 0.00 0.000000 0 3 chdir ------ ----------- ----------- --------- --------- ---------------- Mount: nfs.xxx.xxx.xxx:/path/to/website/files on /path/to/website/files type nfs (rw,hard,intr,noac,vers=4,addr=xx.xx.xx.xx,clientaddr=xx.xx.xx.xx) Any help is, naturally, appreciated.

  Read the article

• Cobbler 2.2.2 problems

  - by Peter

  I have setup a dedicated LAN for Cobbler tests. My setup is: Cobbler server: openSUSE 12.3, cobbler 2.2.2 (from openSUSE repos) Imported distros: Centos 6.5, Red Hat 6.5, Red Hat 7.0, openSUSE 13.1 Target Machine: VMs in a Windows 7 Virtualbox Systems provisioning works OK, but I have some problems. The first one is that cobbler does not honor the "pxe_just_once: 1" setting. When the setup of the target OS is finished, after the reboot the target systems continues to PXE boot! The second problem is that the target server is not correctly configured! See my setup: cobbler system report --name=test Name : test TFTP Boot Files : {} Comment : Fetchable Files : {} Gateway : 192.168.0.1 Hostname : testcob1.example.com Image : IPv6 Autoconfiguration : False IPv6 Default Device : Kernel Options : {} Kernel Options (Post Install) : {} Kickstart : <<inherit>> Kickstart Metadata : {} LDAP Enabled : False LDAP Management Type : authconfig Management Classes : [] Management Parameters : <<inherit>> Monit Enabled : False Name Servers : ['192.168.0.1', '8.8.8.8'] Name Servers Search Path : [] Netboot Enabled : False Owners : ['admin'] Power Management Address : Power ID : Power Password : Power Management Type : ipmitool Power Username : Profile : RHEL-6.5-x86_64 Proxy : <<inherit>> Red Hat Management Key : <<inherit>> Red Hat Management Server : <<inherit>> Repos Enabled : False Server Override : <<inherit>> Status : testing Template Files : {} Virt Auto Boot : <<inherit>> Virt CPUs : <<inherit>> Virt Disk Driver Type : <<inherit>> Virt File Size(GB) : <<inherit>> Virt Path : <<inherit>> Virt RAM (MB) : <<inherit>> Virt Type : <<inherit>> Interface ===== : eth0 Bonding Opts : Bridge Opts : DHCP Tag : DNS Name : Master Interface : Interface Type : IP Address : 192.168.0.200 IPv6 Address : IPv6 Default Gateway : IPv6 MTU : IPv6 Secondaries : [] IPv6 Static Routes : [] MAC Address : Management Interface : True MTU : Subnet Mask : 255.255.255.0 Static : True Static Routes : [] Virt Bridge : So, although I have setup the hostname and the network interface of the target system, after the setup, the hostname is set to localhost.localdomain and eth0 is configured as a DHCP not static! How can I find the problem and fix it? Note that I have synced and restarted cobbler a couple of times, but the problems persists.

  Read the article

• Routing with VPN and asymmetric communication

  - by Louis

  I'm stumbling on a problem that requires your advice. Keywords : networking, route, openVPN Problem : I have a local network with several physical servers and VMs. These machines have ip's in the range 10.10.x.x. I can access these machines from the Internet with the help of openVPN. These machines can : access each other within the local 10.10.x.x subnet access the Internet via the VPN can themselves be accessed (via SSH) from the Internet via the VPN. There is one machine however that behaves strangely and I don't know why. I can SSH into this machine from anywhere via SSH and I can also PING it from anywhere (including the Internet). However from this machine (i.e. when logged into it) I cannot access the Internet or ping machines outside the local network. In other words it will not go beyond the VPN. My question is why? Here are some technical details: The machine's Network Config (running Debian 6.0.3): allow-hotplug eth0 iface eth0 inet static address 10.10.10.200 netmask 255.255.0.0 network 10.10.10.0 broadcast 10.10.10.255 gateway 10.10.10.200 The machine's Routing : Destination Gateway Genmask Flags MSS Window irtt Iface 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 10.10.0.0 10.10.10.250 255.255.0.0 UG 0 0 0 eth0 10.10.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.10.10.250 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.10.10.200 0.0.0.0 UG 0 0 0 eth0 The VPN's Network Config (running Debian 6.0.3): # This is the local network interface auto eth1 allow-hotplug eth1 iface eth1 inet static address 10.10.10.250 netmask 255.255.0.0 broadcast 10.10.10.255 gateway 10.10.10.250 The VPN's routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.10.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0 private 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.10.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 10.10.10.250 0.0.0.0 UG 0 0 0 eth1 0.0.0.0 private 0.0.0.0 UG 0 0 0 eth0 net.ipv4.ip_forward = 1 on both machines. there are no iptables set anywhere. Thanks in advance for any feedback.

  Read the article

• Server 2012 intermittently fails to respond to pings from single host, even with firewall disabled, but responds to non-ICMP requests fine

  - by James Westbury

  This one is kind of weird. I've got the following machines involved: DC01 - 10.1.2.42, Server 2012, domain controller & DNS server, physical machine nagiosv - 10.1.2.35, CentOS 6.4, Nagios, virtual machine CB01 - 10.1.3.81, Ubuntu 12.04 LTS, couchbase server, virtual machine So, I noticed something was wrong while configuring this new Nagios VM. I started seeing DC01's state flapping. I logged into nagiosv when I saw this happening, and attempted to ping DC01, both by FQDN and its IP address. Neither worked. I tried pinging the machine from CB01, which is another VM on the same virtual switch/physical NIC as nagiosv, and that worked fine. Pings still failing from nagiosv at this time. DC01 is also an internal DNS server, so I ran dig google.com from nagiosv, and was able to run a query against DC01 just fine: ;; Query time: 1 msec ;; SERVER: 10.1.2.42#53(10.1.2.42) ;; WHEN: Fri Nov 1 07:53:51 2013 ;; MSG SIZE rcvd: 204 Pings still failing from nagiosv, though. I can ping from DC01 to nagiosv, and that works, and I can still ping from other VMs on the same physical NIC into DC01, and that works. I should mention at this point that I've disabled the firewall on DC01 for testing purposes, and it doesn't make a damned bit of difference. (Even with the firewall enabled, I have a blanket exception for ICMP from the local subnet, so it shouldn't make a difference, but I figured I should test it anyway.) I loaded up Wireshark on DC01 and pinged it from nagiosv again. What I see is a bunch of echo requests coming in and not a single reply going back out. Filtered results here, showing all ICMP traffic during a 15-second period. A few more bits of info: There are no IP conflicts on the network. MAC addresses on the incoming pings match the MAC on the VM. There are no duplicate MACs on the network, as far as I can see. I have absolutely no idea why DC01 is failing to respond, here. Any ideas?

  Read the article

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• SharePoint Saturday Michigan 2010 Recap, Slides, and Photos

  - by Brian Jackett

  This past weekend I attended SharePoint Saturday Michigan (SPSMI) in Ann Arbor, Michigan.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my third SharePoint Saturday attended and second I’ve spoken at.  I believe today it was announced that about 210 people total attended the event.  I was very happy with the turnout, especially the ratio of male to female attendees.  Typically with computer related conferences the ratio leans towards more males attending, but both Peter Serzo (one of conference organizers) and I both commented to each other that at the end of the day it appeared to be close to 40% women in the crowd.  So here’s my recap of the weekend. Arrival     Friday afternoon I drove up from Columbus, OH to Ann Arbor, MI and arrived around 4pm.  I was attempting to avoid the rush hour traffic and construction backups.  Turned out to be a good idea because other speakers coming up Friday got stuck on a highway which literally closed down in both directions due to a bad accident.  I was talking my friend Sean McDonough through the highway closing and this was the first time I had seen a solid black traffic line on Google Maps.  Most of us are familiar with Green, Yellow, and Red, but this line was black if that tells you how bad it got. Speaker “Dinner”     Fast forward a few hours and it was time for the speaker “dinner.”  I put “dinner” in quotes because with this night alone SPSMI set a new bar for nicest and most extravagant speaker appreciation events for SharePoint Saturday.  By tapping into some very influential contacts, the conference organizers were able to provide a truck limo (yep you heard right) with refreshments, access to an underground suite at the Palace of Auburn Hills, and courtside tickets to see the Detroit Pistons play that night.  Being a Michigan native I have to say that I was absolutely floored by this experience and very thankful to our conference organizers Peter, Sebastian, and Jesse along with Trillium Teamologies. Sessions     The actual conference started Saturday morning at 9am with the keynote by Rob Collie who is the Microsoft program manager for PowerPivot.  The day continued and I attended the following sessions: Mike Watson (@mikewat) – “SharePoint 2010 Fight Night: Devs vs. Admins” Karl Swedeberg (@kswedberg) – “A Walk on the Client Side with jQuery“ [my session] Brian Jackett (@briantjackett) - “Real World Deployment of SharePoint 2007 Solutions” Jeff Willinger (@jwillie) - “Social Computing and Collaboration Inside and Outside the 4 Walls” Paul Schaeflein (@paulschaeflein) – “PowerShell for the SharePoint Developer” My Presentation     I had a great time presenting my session on Deploying SharePoint 2007 Solutions, but it wasn’t without its fair share of technical issues.  As my session was right after lunch I came in to my room 10 mins early to set up my laptop, slides, and demos.  As a quick background note, a few months ago I got an upgraded laptop from my company Sogeti and have been dual booting it between XP (factory installed) and Windows Server 2008 R2 w/ Hyper-V.  As such I had prepared all of my demo virtual machines to run under Hyper-V.  About 3 minutes before my session was scheduled to start though it became apparent that I did not have the correct display drivers to connect Windows Server 2008 R2 to the projector…     As you can imagine this was a slight cause for concern as I was potentially going to be unable to give my presentation.  Luckily for me I usually prepare for such unforeseen issues and had my presentation and some spare VMs that would run on XP on my external hard drive.  Knowing this I rebooted my machine into XP and began my presentation without slides until about 5 mins into the session when everything was up and running on XP.  Despite this being the first time I gave this presentation I have to say it was one of my favorites I’ve given so far.  The audience was very engaged in the session and I received some great, positive feedback afterwards.  Thanks to all who attended my session, I appreciate it very much. Link to Presentation Files     For those of you who attended my session and would like my slides or demo PowerShell scripts they can be found on my SkyDrive at the link below.  Also, if you have a few minutes and wouldn’t mind rating my session I have this session posted on SpeakerRate.  As speakers we always appreciate any and all feedback attendees offer, so thank you if you are able to provide any. SkyDrive folder with session files Rate my SharePoint 2007 Solutions session   Picture Albums     For everyone else, here are my pictures from the weekend.  The first link is to my FaceBook album which will have tagging (recommend this one.)  The second is to my Live album if you care for higher resolution images. http://www.facebook.com/album.php?aid=2154482&id=21905041&l=a3fb72ee8c View Full Album Conclusion     A big thank you goes out to all of the organizers, speakers, sponsors, and attendees of SPSMI.  As I’ve said so many times, without each and every one of you these events wouldn’t be possible.  I thoroughly enjoyed this trip back to my home state and presenting a new session.  For those interested in my upcoming schedule I will be giving two sessions on PowerShell at SharePoint Saturday Charlotte in April, helping plan Stir Trek: Iron Man Edition in May, and I’m submitting sessions to Day of .Net Ann Arbor in May as well.  Beyond that I haven’t planned out any travels.  Thanks for reading my recap.  Look forward to more technical posts now that I have a short break in conferences.         -Frog Out   links: Michigan image

  Read the article

• Oracle Linux and Oracle VM pricing guide

  - by wcoekaer

  A few days ago someone showed me a pricing guide from a Linux vendor and I was a bit surprised at the complexity of it. Especially when you look at larger servers (4 or 8 sockets) and when adding virtual machine use into the mix. I think we have a very compelling and simple pricing model for both Oracle Linux and Oracle VM. Let me see if I can explain it in 1 page, not 10 pages. This pricing information is publicly available on the Oracle store, I am using the current public list prices. Also keep in mind that this is for customers using non-oracle x86 servers. When a customer purchases an Oracle x86 server, the annual systems support includes full use (all you can eat) of Oracle Linux, Oracle VM and Oracle Solaris (no matter how many VMs you run on that server, in case you deploy guests on a hypervisor). This support level is the equivalent of premier support in the list below. Let's start with Oracle VM (x86) : Oracle VM support subscriptions are per physical server on which you deploy the Oracle VM Server product. (1) Oracle VM Premier Limited - 1- or 2 socket server : $599 per server per year (2) Oracle VM Premier - more than 2 socket server (4, or 8 or whatever more) : $1199 per server per year The above includes the use of Oracle VM Manager and Oracle Enterprise Manager Cloud Control's Virtualization management pack (including self service cloud portal, etc..) 24x7 support, access to bugfixes, updates and new releases. It also includes all options, live migrate, dynamic resource scheduling, high availability, dynamic power management, etc If you want to play with the product, or even use the product without access to support services, the product is freely downloadable from edelivery. Next, Oracle Linux : Oracle Linux support subscriptions are per physical server. If you plan to run Oracle Linux as a guest on Oracle VM, VMWare or Hyper-v, you only have to pay for a single subscription per system, we do not charge per guest or per number of guests. In other words, you can run any number of Oracle Linux guests per physical server and count it as just a single subscription. (1) Oracle Linux Network Support - any number of sockets per server : $119 per server per year Network support does not offer support services. It provides access to the Unbreakable Linux Network and also offers full indemnification for Oracle Linux. (2) Oracle Linux Basic Limited Support - 1- or 2 socket servers : $499 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management. It includes ocfs2 as a clustered filesystem. (3) Oracle Linux Basic Support - more than 2 socket server (4, or 8 or more) : $1199 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management. It includes ocfs2 as a clustered filesystem (4) Oracle Linux Premier Limited Support - 1- or 2 socket servers : $1399 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management, XFS filesystem support. It also offers Oracle Lifetime support, backporting of patches for critical customers in previous versions of package and ksplice zero-downtime updates. (5) Oracle Linux Premier Support - more than 2 socket servers : $2299 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management, XFS filesystem support. It also offers Oracle Lifetime support, backporting of patches for critical customers in previous versions of package and ksplice zero-downtime updates. (6) Freely available Oracle Linux - any number of sockets You can freely download Oracle Linux, install it on any number of servers and use it for any reason, without support, without right to use of these extra features like Oracle Clusterware or ksplice, without indemnification. However, you do have full access to all errata as well. Need support? then use options (1)..(5) So that's it. Count number of 2 socket boxes, more than 2 socket boxes, decide on basic or premier support level and you are done. You don't have to worry about different levels based on how many virtual instance you deploy or want to deploy. A very simple menu of choices. We offer, inclusive, Linux OS clusterware, Linux OS Management, provisioning and monitoring, cluster filesystem (ocfs), high performance filesystem (xfs), dtrace, ksplice, ofed (infiniband stack for high performance networking). No separate add-on menus. NOTE : socket/cpu can have any number of cores. So whether you have a 4,6,8,10 or 12 core CPU doesn't matter, we count the number of physical CPUs.

  Read the article

• Take Two: Comparing JVMs on ARM/Linux

  - by user12608080

  Although the intent of the previous article, entitled Comparing JVMs on ARM/Linux, was to introduce and highlight the availability of the HotSpot server compiler (referred to as c2) for Java SE-Embedded ARM v7,  it seems, based on feedback, that everyone was more interested in the OpenJDK comparisons to Java SE-E.  In fact there were two main concerns: The fact that the previous article compared Java SE-E 7 against OpenJDK 6 might be construed as an unlevel playing field because version 7 is newer and therefore potentially more optimized. That the generic compiler settings chosen to build the OpenJDK implementations did not put those versions in a particularly favorable light. With those considerations in mind, we'll institute the following changes to this version of the benchmarking: In order to help alleviate an additional concern that there is some sort of benchmark bias, we'll use a different suite, called DaCapo.  Funded and supported by many prestigious organizations, DaCapo's aim is to benchmark real world applications.  Further information about DaCapo can be found at http://dacapobench.org. At the suggestion of Xerxes Ranby, who has been a great help through this entire exercise, a newer Linux distribution will be used to assure that the OpenJDK implementations were built with more optimal compiler settings.  The Linux distribution in this instance is Ubuntu 11.10 Oneiric Ocelot. Having experienced difficulties getting Ubuntu 11.10 to run on the original D2Plug ARMv7 platform, for these benchmarks, we'll switch to an embedded system that has a supported Ubuntu 11.10 release.  That platform is the Freescale i.MX53 Quick Start Board.  It has an ARMv7 Coretex-A8 processor running at 1GHz with 1GB RAM. We'll limit comparisons to 4 JVM implementations: Java SE-E 7 Update 2 c1 compiler (default) Java SE-E 6 Update 30 (c1 compiler is the only option) OpenJDK 6 IcedTea6 1.11pre 6b23~pre11-0ubuntu1.11.10.2 CACAO build 1.1.0pre2 OpenJDK 6 IcedTea6 1.11pre 6b23~pre11-0ubuntu1.11.10.2 JamVM build-1.6.0-devel Certain OpenJDK implementations were eliminated from this round of testing for the simple reason that their performance was not competitive.  The Java SE 7u2 c2 compiler was also removed because although quite respectable, it did not perform as well as the c1 compilers.  Recall that c2 works optimally in long-lived situations.  Many of these benchmarks completed in a relatively short period of time.  To get a feel for where c2 shines, take a look at the first chart in this blog. The first chart that follows includes performance of all benchmark runs on all platforms.  Later on we'll look more at individual tests.  In all runs, smaller means faster.  The DaCapo aficionado may notice that only 10 of the 14 DaCapo tests for this version were executed.  The reason for this is that these 10 tests represent the only ones successfully completed by all 4 JVMs.  Only the Java SE-E 6u30 could successfully run all of the tests.  Both OpenJDK instances not only failed to complete certain tests, but also experienced VM aborts too. One of the first observations that can be made between Java SE-E 6 and 7 is that, for all intents and purposes, they are on par with regards to performance.  While it is a fact that successive Java SE releases add additional optimizations, it is also true that Java SE 7 introduces additional complexity to the Java platform thus balancing out any potential performance gains at this point.  We are still early into Java SE 7.  We would expect further performance enhancements for Java SE-E 7 in future updates. In comparing Java SE-E to OpenJDK performance, among both OpenJDK VMs, Cacao results are respectable in 4 of the 10 tests.  The charts that follow show the individual results of those four tests.  Both Java SE-E versions do win every test and outperform Cacao in the range of 9% to 55%. For the remaining 6 tests, Java SE-E significantly outperforms Cacao in the range of 114% to 311% So it looks like OpenJDK results are mixed for this round of benchmarks.  In some cases, performance looks to have improved.  But in a majority of instances, OpenJDK still lags behind Java SE-Embedded considerably. Time to put on my asbestos suit.  Let the flames begin...

  Read the article

• FILESTREAM/FILETABLE Clarifications for Implementation

  - by user1209734

  Recently our team was looking at FILESTREAM to expand the capabilities of our proprietary application. The main purpose of this app is managing the various PDFS, Images and documents to all of the parts we manufacture. Our ASP application uses a few third party tools to allow viewing of these files. We currently have 980GB of data on the Fileserver. We have around 200GB of Binary data in SQL Server that we would like to extract since it is not performing well hence FILESTREAM seems to be a good compromise to the two major data storage/access issues. A few things are not exactly clear to us: FILESTREAM Can or Cannot store its data on a drive that is not locally attached. We already have a File Server with a RAID 10 (1.5TB drives). This server stores all of the documents right now, would we have to move these drives to the SQL Server for FILESTREAM? That would be a tough bullet to bite since the server also is doubling as the Application Server (Two VMs on one physical server). FILETABLE stores the common metadata about the files but where is the Full Text part of it stored to allow searching of files like doc/docx? Is this separate? Are you able to freely add criteria to this to search by? If so any links to clarify would be appreciated. Can FILETABLE be referenced in another table with a foreign key? Thank you in advance EDIT: For those having these questions this web video covered everything and more in terms of explaining filestream from 2008 to 2012 and the cavets to consider (I would seriously rep him if I could): http://channel9.msdn.com/Events/TechDays/Techdays-2012-the-Netherlands/2270 In conclusion we will not be using FILESTREAM as it would be way to huge of an upsurge to accommodate for investment. EDIT 2: Update to #1 - After carefully assessing FileTable in addition to FILESTREAM we got a winning combination. We did have to move the files over to the new server (wasn't to painful since they were on the same VM).It honestly took more time to write an extraction tool to dump the binary data within SQL to the File System. Update to #2 - This was seperate but again Bob had an excellent webinar explaining this: http://channel9.msdn.com/Events/TechEd/Europe/2012/DBI411 Update to #3 - Using TFT inheritance we recycled the Docs table we had (minus the huge binary blobs) which required very little changes in our legacy apps. This was a huge upshot for the developer team.

  Read the article

• Silverlight with MVVM Inheritance: ModelView and View matching the Model

  - by moonground.de

  Hello Stackoverflowers! :) Today I have a special question on Silverlight (4 RC) MVVM and inheritance concepts and looking for a best practice solution... I think that i understand the basic idea and concepts behind MVVM. My Model doesn't know anything about the ViewModel as the ViewModel itself doesn't know about the View. The ViewModel knows the Model and the Views know the ViewModels. Imagine the following basic (example) scenario (I'm trying to keep anything short and simple): My Model contains a ProductBase class with a few basic properties, a SimpleProduct : ProductBase adding a few more Properties and ExtendedProduct : ProductBase adding another properties. According to this Model I have several ViewModels, most essential SimpleProductViewModel : ViewModelBase and ExtendedProductViewModel : ViewModelBase. Last but not least, according Views SimpleProductView and ExtendedProductView. In future, I might add many product types (and matching Views + VMs). 1. How do i know which ViewModel to create when receiving a Model collection? After calling my data provider method, it will finally end up having a List<ProductBase>. It containts, for example, one SimpleProduct and two ExtendedProducts. How can I transform the results to an ObservableCollection<ViewModelBase> having the proper ViewModel types (one SimpleProductViewModel and two ExtendedProductViewModels) in it? I might check for Model type and construct the ViewModel accordingly, i.e. foreach(ProductBase currentProductBase in resultList) if (currentProductBase is SimpleProduct) viewModels.Add( new SimpleProductViewModel((SimpleProduct)currentProductBase)); else if (currentProductBase is ExtendedProduct) viewModels.Add( new ExtendedProductViewModels((ExtendedProduct)currentProductBase)); ... } ...but I consider this very bad practice as this code doesn't follow the object oriented design. The other way round, providing abstract Factory methods would reduce the code to: foreach(ProductBase currentProductBase in resultList) viewModels.Add(currentProductBase.CreateViewModel()) and would be perfectly extensible but since the Model doesn't know the ViewModels, that's not possible. I might bring interfaces into game here, but I haven't seen such approach proven yet. 2. How do i know which View to display when selecting a ViewModel? This is pretty the same problem, but on a higher level. Ended up finally having the desired ObservableCollection<ViewModelBase> collection would require the main view to choose a matching View for the ViewModel. In WPF, there is a DataTemplate concept which can supply a View upon a defined DataType. Unfortunately, this doesn't work in Silverlight and the only replacement I've found was the ResourceSelector of the SLExtensions toolkit which is buggy and not satisfying. Beside that, all problems from Question 1 apply as well. Do you have some hints or even a solution for the problems I describe, which you hopefully can understand from my explanation? Thank you in advance! Thomas

  Read the article

• How can a 1Gb Java heap on a 64bit machine use 3Gb of VIRT space?

  - by Graeme Moss

  I run the same process on a 32bit machine as on a 64bit machine with the same memory VM settings (-Xms1024m -Xmx1024m) and similar VM version (1.6.0_05 vs 1.6.0_16). However the virtual space used by the 64bit machine (as shown in top under "VIRT") is almost three times as big as that in 32bit! I know 64bit VMs will use a little more memory for the larger references, but how can it be three times as big? Am I reading VIRT in top incorrectly? Full data shown below, showing top and then the result of jmap -heap, first for 64bit, then for 32bit. Note the VIRT for 64bit is 3319m for 32bit is 1220m. * 64bit * PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22534 agent 20 0 3319m 163m 14m S 4.7 2.0 0:04.28 java $ jmap -heap 22534 Attaching to process ID 22534, please wait... Debugger attached successfully. Server compiler detected. JVM version is 10.0-b19 using thread-local object allocation. Parallel GC with 4 thread(s) Heap Configuration: MinHeapFreeRatio = 40 MaxHeapFreeRatio = 70 MaxHeapSize = 1073741824 (1024.0MB) NewSize = 2686976 (2.5625MB) MaxNewSize = -65536 (-0.0625MB) OldSize = 5439488 (5.1875MB) NewRatio = 2 SurvivorRatio = 8 PermSize = 21757952 (20.75MB) MaxPermSize = 88080384 (84.0MB) Heap Usage: PS Young Generation Eden Space: capacity = 268500992 (256.0625MB) used = 247066968 (235.62142181396484MB) free = 21434024 (20.441078186035156MB) 92.01715277089181% used From Space: capacity = 44695552 (42.625MB) used = 0 (0.0MB) free = 44695552 (42.625MB) 0.0% used To Space: capacity = 44695552 (42.625MB) used = 0 (0.0MB) free = 44695552 (42.625MB) 0.0% used PS Old Generation capacity = 715849728 (682.6875MB) used = 0 (0.0MB) free = 715849728 (682.6875MB) 0.0% used PS Perm Generation capacity = 21757952 (20.75MB) used = 16153928 (15.405586242675781MB) free = 5604024 (5.344413757324219MB) 74.24378912132907% used * 32bit * PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 30168 agent 20 0 1220m 175m 12m S 0.0 2.2 0:13.43 java $ jmap -heap 30168 Attaching to process ID 30168, please wait... Debugger attached successfully. Server compiler detected. JVM version is 14.2-b01 using thread-local object allocation. Parallel GC with 8 thread(s) Heap Configuration: MinHeapFreeRatio = 40 MaxHeapFreeRatio = 70 MaxHeapSize = 1073741824 (1024.0MB) NewSize = 1048576 (1.0MB) MaxNewSize = 4294901760 (4095.9375MB) OldSize = 4194304 (4.0MB) NewRatio = 8 SurvivorRatio = 8 PermSize = 16777216 (16.0MB) MaxPermSize = 67108864 (64.0MB) Heap Usage: PS Young Generation Eden Space: capacity = 89522176 (85.375MB) used = 80626352 (76.89128112792969MB) free = 8895824 (8.483718872070312MB) 90.0629940005033% used From Space: capacity = 14876672 (14.1875MB) used = 14876216 (14.187065124511719MB) free = 456 (4.3487548828125E-4MB) 99.99693479832048% used To Space: capacity = 14876672 (14.1875MB) used = 0 (0.0MB) free = 14876672 (14.1875MB) 0.0% used PS Old Generation capacity = 954466304 (910.25MB) used = 10598496 (10.107513427734375MB) free = 943867808 (900.1424865722656MB) 1.1104107034039412% used PS Perm Generation capacity = 16777216 (16.0MB) used = 11366448 (10.839889526367188MB) free = 5410768 (5.1601104736328125MB) 67.74930953979492% used

  Read the article

• Autocomplete server-side implementation

  - by toluju

  What is a fast and efficient way to implement the server-side component for an autocomplete feature in an html input box? I am writing a service to autocomplete user queries in our web interface's main search box, and the completions are displayed in an ajax-powered dropdown. The data we are running queries against is simply a large table of concepts our system knows about, which matches roughly with the set of wikipedia page titles. For this service obviously speed is of utmost importance, as responsiveness of the web page is important to the user experience. The current implementation simply loads all concepts into memory in a sorted set, and performs a simple log(n) lookup on a user keystroke. The tailset is then used to provide additional matches beyond the closest match. The problem with this solution is that it does not scale. It currently is running up against the VM heap space limit (I've set -Xmx2g, which is about the most we can push on our 32 bit machines), and this prevents us from expanding our concept table or adding more functionality. Switching to 64-bit VMs on machines with more memory isn't an immediate option. I've been hesitant to start working on a disk-based solution as I am concerned that disk seek time will kill performance. Are there possible solutions that will let me scale better, either entirely in memory or with some fast disk-backed implementations? Edits: @Gandalf: For our use case it is important the the autocompletion is comprehensive and isn't just extra help for the user. As for what we are completing, it is a list of concept-type pairs. For example, possible entries are [("Microsoft", "Software Company"), ("Jeff Atwood", "Programmer"), ("StackOverflow.com", "Website")]. We are using Lucene for the full search once a user selects an item from the autocomplete list, but I am not yet sure Lucene would work well for the autocomplete itself. @Glen: No databases are being used here. When I'm talking about a table I just mean the structured representation of my data. @Jason Day: My original implementation to this problem was to use a Trie, but the memory bloat with that was actually worse than the sorted set due to needing a large number of object references. I'll read on the ternary search trees to see if it could be of use.

  Read the article

• IIS7 web farm - local or shared content?

  - by rbeier

  We're setting up an IIS7 web farm with two servers. Should each server have its own local copy of the content, or should they pull content directly from a UNC share? What are the pros and cons of each approach? We currently have a single live server WEB1, with content stored locally on a separate partition. A job periodically syncs WEB1 to a standby server WEB2, using robocopy for content and msdeploy for config. If WEB1 goes down, Nagios notifies us, and we manually run a script to move the IP addresses to WEB2's network interface. Both servers are actually VMs running on separate VMWare ESX 4 hosts. The servers are domain-joined. We have around 50-60 live sites on WEB1 - mostly ASP.NET, with a few that are just static HTML. Most are low-traffic "microsites". A few have moderate traffic, but none are massive. We'd like to change this so both WEB1 and WEB2 are actively serving content. This is mainly for reliability - if WEB1 goes down, we don't want to have to manually intervene to fail things over. Spreading the load is also nice, but the load is not high enough right now for us to need this. We're planning to configure our firewall to balance traffic across the two servers. It will detect when a server goes down and will send all the traffic to the remaining live server. We're planning to use sticky sessions for now... eventually we may move to SQL Server session state and stateless load balancing. But we need a way for the servers to share content. We were originally planning to move all the content to a UNC share. Our storage provider says they can set up a highly available SMB share for us. So if we go the UNC route, the storage shouldn't be a single point of failure. But we're wondering about the downsides to this approach: We'll need to change the physical paths for each site and virtual directory. There are also some projects that have absolute paths in their web.config files - we'll have to update those as well. We'll need to create a domain user for the web servers to access the share, and grant that user appropriate permissions. I haven't looked into this yet - I'm not sure if the application pool identity needs to be changed to this user, or if there's another way to tell IIS to use this account when connecting to the share. Sites will no longer be able to access their content if there's ever an Active Directory problem. In general, it just seems a lot more complicated, with more moving parts that could break. Our storage provider would create a volume for us on their redundant SAN. If I understand correctly, this SAN volume would be mounted on a VM running in their redundant VMWare environment; this VM would then expose the SMB share to our web servers. On the other hand, a benefit of the shared content approach is that we'd only need to deploy code to one place, and there would never be a temporary inconsistency between multiple copies of the content. This thread is pretty interesting, though some of these people are working at a much larger scale. I've just been discussing content so far, but we also need to think about configuration. I don't know if we can just use DFS replication for the applicationHost.config and other files, or if it's best to use the shared configuration feature with the config on a UNC share. What do you think? Thanks for your help, Richard

  Read the article

• Regression testing with Selenium GRID

  - by Ben Adderson

  A lot of software teams out there are tasked with supporting and maintaining systems that have grown organically over time, and the web team here at Red Gate is no exception. We're about to embark on our first significant refactoring endeavour for some time, and as such its clearly paramount that the code be tested thoroughly for regressions. Unfortunately we currently find ourselves with a codebase that isn't very testable - the three layers (database, business logic and UI) are currently tightly coupled. This leaves us with the unfortunate problem that, in order to confidently refactor the code, we need unit tests. But in order to write unit tests, we need to refactor the code :S To try and ease the initial pain of decoupling these layers, I've been looking into the idea of using UI automation to provide a sort of system-level regression test suite. The idea being that these tests can help us identify regressions whilst we work towards a more testable codebase, at which point the more traditional combination of unit and integration tests can take over. Ending up with a strong battery of UI tests is also a nice bonus :) Following on from my previous posts (here, here and here) I knew I wanted to use Selenium. I also figured that this would be a good excuse to put my xUnit [Browser] attribute to good use. Pretty quickly, I had a raft of tests that looked like the following (this particular example uses Reflector Pro). In a nut shell the test traverses our shopping cart and, for a particular combination of number of users and months of support, checks that the price calculations all come up with the correct values. [BrowserTheory] [Browser(Browsers.Firefox3_6, "http://www.red-gate.com")] public void Purchase1UserLicenceNoSupport(SeleniumProvider seleniumProvider) {     //Arrange     _browser = seleniumProvider.GetBrowser();     _browser.Open("http://www.red-gate.com/dynamic/shoppingCart/ProductOption.aspx?Product=ReflectorPro");                  //Act     _browser = ShoppingCartHelpers.TraverseShoppingCart(_browser, 1, 0, ".NET Reflector Pro");     //Assert     var priceResult = PriceHelpers.GetNewPurchasePrice(db, "ReflectorPro", 1, 0, Currencies.Euros);         Assert.Equal(priceResult.Price, _browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl01_Price"));     Assert.Equal(priceResult.Tax, _browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl02_Tax"));     Assert.Equal(priceResult.Total, _browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl02_Total")); } These tests are pretty concise, with much of the common code in the TraverseShoppingCart() and GetNewPurchasePrice() methods. The (inevitable) problem arose when it came to execute these tests en masse. Selenium is a very slick tool, but it can't mask the fact that UI automation is very slow. To give you an idea, the set of cases that covers all of our products, for all combinations of users and support, came to 372 tests (for now only considering purchases in dollars). In the world of automated integration tests, that's a very manageable number. For unit tests, it's a trifle. However for UI automation, those 372 tests were taking just over two hours to run. Two hours may not sound like a lot, but those cases only cover one of the three currencies we deal with, and only one of the many different ways our systems can be asked to calculate a price. It was already pretty clear at this point that in order for this approach to be viable, I was going to have to find a way to speed things up. Up to this point I had been using Selenium Remote Control to automate Firefox, as this was the approach I had used previously and it had worked well. Fortunately,  the guys at SeleniumHQ also maintain a tool for executing multiple Selenium RC tests in parallel: Selenium Grid. Selenium Grid uses a central 'hub' to handle allocation of Selenium tests to individual RCs. The Remote Controls simply register themselves with the hub when they start, and then wait to be assigned work. The (for me) really clever part is that, as far as the client driver library is concerned, the grid hub looks exactly the same as a vanilla remote control. To create a new browser session against Selenium RC, the following C# code suffices: new DefaultSelenium("localhost", 4444, "*firefox", "http://www.red-gate.com"); This assumes that the RC is running on the local machine, and is listening on port 4444 (the default). Assuming the hub is running on your local machine, then to create a browser session in Selenium Grid, via the hub rather than directly against the control, the code is exactly the same! Behind the scenes, the hub will take this request and hand it off to one of the registered RCs that provides the "*firefox" execution environment. It will then pass all communications back and forth between the test runner and the remote control transparently. This makes running existing RC tests on a Selenium Grid a piece of cake, as the developers intended. For a more detailed description of exactly how Selenium Grid works, see this page. Once I had a test environment capable of running multiple tests in parallel, I needed a test runner capable of doing the same. Unfortunately, this does not currently exist for xUnit (boo!). MbUnit on the other hand, has the concept of concurrent execution baked right into the framework. So after swapping out my assembly references, and fixing up the resulting mismatches in assertions, my example test now looks like this: [Test] public void Purchase1UserLicenceNoSupport() {    //Arrange    ISelenium browser = BrowserHelpers.GetBrowser();    var db = DbHelpers.GetWebsiteDBDataContext();    browser.Start();    browser.Open("http://www.red-gate.com/dynamic/shoppingCart/ProductOption.aspx?Product=ReflectorPro");                 //Act     browser = ShoppingCartHelpers.TraverseShoppingCart(browser, 1, 0, ".NET Reflector Pro");    var priceResult = PriceHelpers.GetNewPurchasePrice(db, "ReflectorPro", 1, 0, Currencies.Euros);    //Assert     Assert.AreEqual(priceResult.Price, browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl01_Price"));     Assert.AreEqual(priceResult.Tax, browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl02_Tax"));     Assert.AreEqual(priceResult.Total, browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl02_Total")); } This is pretty much the same as the xUnit version. The exceptions are that the attributes have changed,  the //Arrange phase now has to handle setting up the ISelenium object, as the attribute that previously did this has gone away, and the test now sets up its own database connection. Previously I was using a shared database connection, but this approach becomes more complicated when tests are being executed concurrently. To avoid complexity each test has its own connection, which it is responsible for closing. For the sake of readability, I snipped out the code that closes the browser session and the db connection at the end of the test. With all that done, there was only one more step required before the tests would execute concurrently. It is necessary to tell the test runner which tests are eligible to run in parallel, via the [Parallelizable] attribute. This can be done at the test, fixture or assembly level. Since I wanted to run all tests concurrently, I marked mine at the assembly level in the AssemblyInfo.cs using the following: [assembly: DegreeOfParallelism(3)] [assembly: Parallelizable(TestScope.All)] The second attribute marks all tests in the assembly as [Parallelizable], whilst the first tells the test runner how many concurrent threads to use when executing the tests. I set mine to three since I was using 3 RCs in separate VMs. With everything now in place, I fired up the Icarus* test runner that comes with MbUnit. Executing my 372 tests three at a time instead of one at a time reduced the running time from 2 hours 10 minutes, to 55 minutes, that's an improvement of about 58%! I'd like to have seen an improvement of 66%, but I can understand that either inefficiencies in the hub code, my test environment or the test runner code (or some combination of all three most likely) contributes to a slightly diminished improvement. That said, I'd love to hear about any experience you have in upping this efficiency. Ultimately though, it was a saving that was most definitely worth having. It makes regression testing via UI automation a far more plausible prospect. The other obvious point to make is that this approach scales far better than executing tests serially. So if ever we need to improve performance, we just register additional RC's with the hub, and up the DegreeOfParallelism. *This was just my personal preference for a GUI runner. The MbUnit/Gallio installer also provides a command line runner, a TestDriven.net runner, and a Resharper 4.5 runner. For now at least, Resharper 5 isn't supported.

  Read the article

• how to make bridge networking with KVM work in Fedora19

  - by netllama

  I'm attempting to get several virtual machines setup on a Fedora-19 host system, with the traditional bridge network devices (br0, br1, etc). I've done this many times before with older versions of Fedora (16, 14, etc), and it just works. However, for reasons that I cannot figure out, the bridge doesn't seem to be working in Fedora19. While I can successfully connect to the outside world (local network + internet) from inside a VM, nothing can communicate with the VM from outside (local network). I'm referring to something as trivial as pinging. From inside the VM, I can ping anything successfully (0% packet loss). However, from outside the VM (on the host, or any other system on the same network), I see 100% packet loss when pinging the IP address of the VM. My first question is simply, does anyone else have this working successfully in F19? And if so, what steps did you need to follow? I'm not using NetworkManager at all, its all the network service. There are no firewalls involved anywhere (iptables & firewall services are currently disabled). Here's the current host configuration: # brctl show bridge name bridge id STP enabled interfaces br0 8000.38eaa792efe5 no em2 vnet1 br1 8000.38eaa792efe6 no em3 br2 8000.38eaa792efe7 no em4 vnet0 virbr0 8000.525400db3ebf yes virbr0-nic # more /etc/sysconfig/network-scripts/ifcfg-em2 TYPE=Ethernet BRIDGE="br0" NAME=em2 DEVICE="em2" UUID=aeaa839e-c89c-4d6e-9daa-79b6a1b919bd ONBOOT=yes HWADDR=38:EA:A7:92:EF:E5 NM_CONTROLLED="no" # more /etc/sysconfig/network-scripts/ifcfg-br0 TYPE=Bridge NM_CONTROLLED="no" BOOTPROTO=dhcp NAME=br0 DEVICE="br0" ONBOOT=yes # ifconfig em2 ;ifconfig br0 em2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::3aea:a7ff:fe92:efe5 prefixlen 64 scopeid 0x20<link> ether 38:ea:a7:92:ef:e5 txqueuelen 1000 (Ethernet) RX packets 100093 bytes 52354831 (49.9 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 25321 bytes 15791341 (15.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device memory 0xf7d00000-f7e00000 br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.31.99.226 netmask 255.255.252.0 broadcast 10.31.99.255 inet6 fe80::3aea:a7ff:fe92:efe5 prefixlen 64 scopeid 0x20<link> ether 38:ea:a7:92:ef:e5 txqueuelen 0 (Ethernet) RX packets 19619 bytes 1963328 (1.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 11 bytes 1074 (1.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Relevant section from /etc/libvirt/qemu/foo.xml (one of the VMs with this problem): <interface type='bridge'> <mac address='52:54:00:26:22:9d'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> # ps -ef | grep qemu qemu 1491 1 82 13:25 ? 00:42:09 /usr/bin/qemu-system-x86_64 -machine accel=kvm -name cuda-linux64-build5 -S -machine pc-0.13,accel=kvm,usb=off -cpu SandyBridge,+pdpe1gb,+osxsave,+dca,+pcid,+pdcm,+xtpr,+tm2,+est,+smx,+vmx,+ds_cpl,+monitor,+dtes64,+pbe,+tm,+ht,+ss,+acpi,+ds,+vme -m 16384 -smp 6,sockets=6,cores=1,threads=1 -uuid 6e930234-bdfd-044d-2787-22d4bbbe30b1 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/cuda-linux64-build5.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/var/lib/libvirt/images/cuda-linux64-build5.img,if=none,id=drive-virtio-disk0,format=raw,cache=writeback -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -netdev tap,fd=25,id=hostnet0,vhost=on,vhostfd=26 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:26:22:9d,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -vnc 127.0.0.1:1 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 I can provide additional information, if requested. thanks!

  Read the article

• Add a small RAID card? Will it help overall stability and performance of my nine hard drives?

  - by Ray

  Hi, Will I get any extra genuine added performance and RAID stability if I insert a basic RAID card into a PCI-E x1 slot? I am considering the Adaptec 1220SA - 2 port SATA , pci-express (1x) , raid 0/1. Ok it only supports two SATA drives. Purpose is to help support the eight internal hard drives (1TB each), a DVD drive and an external e-SATA connected 2TB hard drive - by dealing with two of the internal hard drives. My current configuration of eight internal 1TB Barracuda (7200.12) SATA hard drives, one external 2TB SATA Western Digital Green Drive (e-SATA) and one DVD drive can already be supported by the Intel P55 & JMicron controllers on the ASUS motherboard : the Intel P55 (controls six HDD; configured as three x RAID 1), and the JMicron (controls two HDD as one RAID 1, as well as the DVD drive and the external SATA drive via the motherboard's e-SATA port (controlled by the JMicron)). Bigger picture details : I have an ASUS motherboard designed for the LGA1156 type processor and it includes the Intel P55 Express Chipset and JMicron. I am using the Intel Core i7-870 processor, and have 8GB DDR3 (1333) memory (four x 2GB Corsair DIMMs). Enough overall power. The power supply is more than sufficicient for the system. Corsair AX850. The system will never need the full 850 watts (future : second graphics card). The RAID card would provide hardware RAID 1 for two of the eight intrnal drives. It would either reduce the load on : the Intel P55 firmware RAID support, or replace the JMicron controller's RAID 1 set. I am busy installing the above configuration using Windows 7 Ultimate 64-bit as the OS. The RAID card is a last minute addition to the plan. Is it worth spending the extra R700 - R900 on the Adaptec 1220SA, or equivalent RAID card? I cannot afford to spend yet another R2000 - R3000 on a RAID card that would support many SATA2 hard drives, with a better RAID, example the RAID 5. My Issue & assumption : I am trusting that the Intel P55 chipset can properly handle six drives, configured as three * RAID 1. I am assuming that the JMicron can handle, using its RED SATA ports, one RAID-1 (two HDDs). The DVD drive connects to the JMicron optical SATA port 1 (white port 1). White port 2 is not used. The e-SATA connection is from the JMicron straight to, and through the motherboard - to an on-board (rear panel) e-SATA port. Am I being a little hopeful in only using the on-board Intel P55 and the JMicron? Is it a waste of money to install a RAID card that handles two SATA2 drives? OR Is it wisdom to take the pressure a little off the Intel P55? Obviously I am interested in data security, hence RAID 1, not RAID Zero. RAID 5 would be nice. The CPU, Intel Core i7-870 will provide the clout. Context to nine drives : I am using virtualisation with Windows 7 Ultimate. Bootable VMs. The operating system gets a mirror. Loaded apps gets a mirror. The current design data is kept in another mirror and Another mirror is back-up one and / or VM territory. Then the external 2TB drive (via e-SATA) is the next layer of data security and then finally, I use off-site data security. Thanks.

  Read the article

• Building an Infrastructure Cloud with Oracle VM for x86 + Enterprise Manager 12c

  - by Richard Rotter

  Cloud Computing? Everyone is talking about Cloud these days. Everyone is explaining how the cloud will help you to bring your service up and running very fast, secure and with little effort. You can find these kinds of presentations at almost every event around the globe. But what is really behind all this stuff? Is it really so simple? And the answer is: Yes it is! With the Oracle SW Stack it is! In this post, I will try to bring this down to earth, demonstrating how easy it could be to build a cloud infrastructure with Oracle's solution for cloud computing.But let me cover some basics first: How fast can you build a cloud?How elastic is your cloud so you can provide new services on demand? How much effort does it take to monitor and operate your Cloud Infrastructure in order to meet your SLAs?How easy is it to chargeback for your services provided? These are the critical success factors of Cloud Computing. And Oracle has an answer to all those questions. By using Oracle VM for X86 in combination with Enterprise Manager 12c you can build and control your cloud environment very fast and easy. What are the fundamental building blocks for your cloud? Oracle Cloud Building Blocks #1 Hardware Surprise, surprise. Even the cloud needs to run somewhere, hence you will need hardware. This HW normally consists of servers, storage and networking. But Oracles goes beyond that. There are Optimized Solutions available for your cloud infrastructure. This is a cookbook to build your HW cloud platform. For example, building your cloud infrastructure with blades and our network infrastructure will reduce complexity in your datacenter (Blades with switch network modules, splitter cables to reduce the amount of cables, TOR (Top Of the Rack) switches which are building the interface to your infrastructure environment. Reducing complexity even in the cabling will help you to manage your environment more efficient and with less risk. Of course, our engineered systems fit into the cloud perfectly too. Although they are considered as a PaaS themselves, having the database SW (for Exadata) and the application development environment (for Exalogic) already deployed on them, in general they are ideal systems to enable you building your own cloud and PaaS infrastructure. #2 Virtualization The next missing link in the cloud setup is virtualization. For me personally, it's one of the most hidden "secret", that oracle can provide you with a complete virtualization stack in terms of a hypervisor on both architectures: X86 and Sparc CPUs. There is Oracle VM for X86 and Oracle VM for Sparc available at no additional  license costs if your are running this virtualization stack on top of Oracle HW (and with Oracle Premier Support for HW). This completes the virtualization portfolio together with Solaris Zones introduced already with Solaris 10 a few years ago. Let me explain how Oracle VM for X86 works: Oracle VM for x86 consists of two main parts: - The Oracle VM Server: Oracle VM Server is installed on bare metal and it is the hypervisor which is able to run virtual machines. It has a very small footprint. The ISO-Image of Oracle VM Server is only 200MB large. It is very small but efficient. You can install a OVM-Server in less than 5 mins by booting the Server with the ISO-Image assigned and providing the necessary configuration parameters (like installing an Linux distribution). After the installation, the OVM-Server is ready to use. That's all. - The Oracle VM-Manager: OVM-Manager is the central management tool where you can control your OVM-Servers. OVM-Manager provides the graphical user interface, which is an Application Development Framework (ADF) application, with a familiar web-browser based interface, to manage Oracle VM Servers, virtual machines, and resources. The Oracle VM Manager has the following capabilities: Create virtual machines Create server pools Power on and off virtual machines Manage networks and storage Import virtual machines, ISO files, and templates Manage high availability of Oracle VM Servers, server pools, and virtual machines Perform live migration of virtual machines I want to highlight one of the goodies which you can use if you are running Oracle VM for X86: Preconfigured, downloadable Virtual Machine Templates form edelivery With these templates, you can download completely preconfigured Virtual Machines in your environment, boot them up, configure them at first time boot and use it. There are templates for almost all Oracle SW and Applications (like Fusion Middleware, Database, Siebel, etc.) available. #3) Cloud Management The management of your cloud infrastructure is key. This is a day-to-day job. Acquiring HW, installing a virtualization layer on top of it is done just at the beginning and if you want to expand your infrastructure. But managing your cloud, keeping it up and running, deploying new services, changing your chargeback model, etc, these are the daily jobs. These jobs must be simple, secure and easy to manage. The Enterprise Manager 12c Cloud provides this functionality from one management cockpit. Enterprise Manager 12c uses Oracle VM Manager to control OVM Serverpools. Once you registered your OVM-Managers in Enterprise Manager, then you are able to setup your cloud infrastructure and manage everything from Enterprise Manager. What you need to do in EM12c is: ">Register your OVM Manager in Enterprise ManagerAfter Registering your OVM Manager, all the functionality of Oracle VM for X86 is also available in Enterprise Manager. Enterprise Manager works as a "Manger" of the Manager. You can register as many OVM-Managers you want and control your complete virtualization environment Create Roles and Users for your Self Service Portal in Enterprise ManagerWith this step you allow users to logon on the Enterprise Manager Self Service Portal. Users can request Virtual Machines in this portal. Setup the Cloud InfrastructureSetup the Quotas for your self service users. How many VMs can they request? How much of your resources ( cpu, memory, storage, network, etc. etc.)? Which SW components (templates, assemblys) can your self service users request? In this step, you basically set up the complete cloud infrastructure. Setup ChargebackOnce your cloud is set up, you need to configure your chargeback mechanism. The Enterprise Manager collects the resources metrics, which are used in a very deep level. Almost all collected Metrics could be used in the chargeback module. You can define chargeback plans based on configurations (charge for the amount of cpu, memory, storage is assigned to a machine, or for a specific OS which is installed) or chargeback on resource consumption (% of cpu used, storage used, etc). Or you can also define a combination of configuration and consumption chargeback plans. The chargeback module is very flexible. Here is a overview of the workflow how to handle infrastructure cloud in EM: Summary As you can see, setting up an Infrastructure Cloud Service with Oracle VM for X86 and Enterprise Manager 12c is really simple. I personally configured a complete cloud environment with three X86 servers and a small JBOD san box in less than 3 hours. There is no magic in it, it is all straightforward. Of course, you have to have some experience with Oracle VM and Enterprise Manager. Experience in setting up Linux environments helps as well. I plan to publish a technical cookbook in the next few weeks. I hope you found this post useful and will see you again here on our blog. Any hints, comments are welcome!

  Read the article

• How to stop Apache from crashing my entire server?

  - by CyberShadow

  I maintain a Gentoo server with a few services, including Apache. It's fairly low-end (2GB of RAM and a low-end CPU with 2 cores). My problem is that, despite my best efforts, an over-loaded Apache crashes the entire server. In fact, at this point I'm close to being convinced that Linux is a horrible operating system that isn't worth anyone's time looking for stability under load. Things I tried: Adjusting oom_adj for the root Apache process (and thus all its children). That had close to no effect. When Apache was overloaded it would bring the system to a grind, as the system paged out everything else before it got to kill anything. Turning off swap. Didn't help, it would unload memory paged to binaries of processes and other files on /, thus causing the same effect. Putting it in a memory-limited cgroup (limited to 512 MB of RAM, 1/4th of the total). This "worked", at least in my own stress tests - except the server keeps crashing under load (basically stalling all other processes, inaccessible via SSH, etc.) Running it with idle I/O priority. This wasn't a very good idea in the end, because it just caused the system load to climb indefinitely (into the thousands) with almost no visible effect - until you tried to access an unbuffered part of the disk. This caused the task to freeze. (So much for good I/O scheduling, eh?) Limiting the number of concurrent connections to Apache. Setting the number too low caused web sites to become unresponsive due to most slots being occupied with long requests (file downloads). I tried various Apache MPMs without much success (prefork, event, itk). Switching from prefork/event+php-cgi+suphp to itk+mod_php. This improved performance, but didn't solve the actual problem. Switching I/O schedulers (cfq to deadline). Just to stress this out: I don't care if Apache itself goes down under load, I just want the rest of my system to remain stable. Of course, having Apache recover quickly after a brief period of intensive load would be great to have, but one step at a time. Right now I am mostly dumbfounded by how can humanity, in this day and age, design an operating system where such a seemingly simple task (don't allow one system component to crash the entire system) seems practically impossible - or at least, very hard to do. Please don't suggest things like VMs or "BUY MORE RAM". Some more information gathered with a friend's help: The processes hang when the cgroup oom killer is invoked. Here's the call trace: [<ffffffff8104b94b>] ? prepare_to_wait+0x70/0x7b [<ffffffff810a9c73>] mem_cgroup_handle_oom+0xdf/0x180 [<ffffffff810a9559>] ? memcg_oom_wake_function+0x0/0x6d [<ffffffff810aa041>] __mem_cgroup_try_charge+0x32d/0x478 [<ffffffff810aac67>] mem_cgroup_charge_common+0x48/0x73 [<ffffffff81081c98>] ? __lru_cache_add+0x60/0x62 [<ffffffff810aadc3>] mem_cgroup_newpage_charge+0x3b/0x4a [<ffffffff8108ec38>] handle_mm_fault+0x305/0x8cf [<ffffffff813c6276>] ? schedule+0x6ae/0x6fb [<ffffffff8101f568>] do_page_fault+0x214/0x22b [<ffffffff813c7e1f>] page_fault+0x1f/0x30 At this point, the apache memory cgroup is practically deadlocked, and burning CPU in syscalls (all with the above call trace). This seems like a problem in the cgroup implementation...

  Read the article

• XenServer Converting HVM to Paravirtualised

  - by Karl Kloppenborg

  Recently I have been tasked with the daunting process of converting a setup of HVM enabled VMs (running on Citrix XenServer 5.6.0) into PV (paravirtualised) containers. The constraints of the project was that: The operating system must be functionally identical after the migration. minimal modification to the operating system (with exception of kernel / drive mapping) I also was allowed to change the bootloader(ie, grub) in what ever way I see fit. However, I have attempted this, I will firstly like to show you my steps I took. This at the moment is CentOS5.5 specific: Steps: yum install kernel-xen This installed: 2.6.18-194.32.1.el5xen edited: /boot/grub/menu.lst changed my specs to match: title CentOS (2.6.18-194.32.1.el5xen) root (hd0,0) kernel /vmlinuz-2.6.18-194.32.1.el5xen ro root=/dev/VolGroup00/LogVol00 console=xvc0 initrd /initrd-2.6.18-194.32.1.el5xen.img Then I changed my xenserver parameters to match: xe vm-param-set uuid=[vm uuid] PV-bootloader-args="--kernel /vmlinuz-2.6.18-194.32.1.el5xen --ramdisk /initrd-2.6.18-194.32.1.el5xen.img" xe vm-param-set uuid=[vm uuid] HVM-boot-policy="" xe vm-param-set uuid=[vm uuid] PV-bootloader=pygrub xe vbd-param-set uuid==[Virtual Block Device/VBD uuid] bootable=true Some things to note, I am running a VolGroup LVM ;) Anyways, after all these steps (which aren't much!) I boot the VM and it boots initial kernel just fine, however I am presented with this error: Boot Screen: device-mapper: dm-raid45: initialized v0.2594l Waiting for driver initialization. Scanning and configuring dmraid supported devices Scanning logical volumes Reading all physical volumes. This may take a while... Activating logical volumes Volume group "VolGroup00" not found Creating root device. Mounting root filesystem. mount: could not find filesystem '/dev/root' Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory Now my hints are that it cannot detect / because of the fact that when you change from HVM mode to PV it does something (not that obvious) When you make a SR (storage) on a HVM, you get it mounted to the guest os as /dev/hda. However in PV mode, this presents itself as /dev/xvda... Could this be the answer? and if so, how the heck to I implement it?? Update: So I have gotten a bit further in my quest, as it now detects the LVM's... To do this, I required to recompile the xen-kernel initrd image. Command: mkinitrd -v --builtin=xen_vbd --preload=xenblk initrd-2.6.18-194.32.1.el5xen.img 2.6.18-194.32.1.el5xen Now when I boot I get this: Boot Screen: Loading dm-raid45.ko module device-mapper: dm-raid45: initialized v0.2594l Scanning and configuring dmraid supported devices Scanning logical volumes Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata type lvm2 Activating logical volumes 3 logical volume(s) in volume group "VolGroup00" now active Creating root device. Mounting root filesystem. mount: error mounting /dev/root on /sysroot as ext3: Device or resource busy Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory Kernel panic - not syncing: Attempted to kill init!

  Read the article

• Oracle Certification and virtualization Solutions.

  - by scoter

  As stated in official MOS ( My Oracle Support ) document 249212.1 support for Oracle products on non-Oracle VM platforms follow exactly the same stance as support for VMware and, so, the only x86 virtualization software solution certified for any Oracle product is "Oracle VM". Based on the fact that: Oracle VM is totally free ( you have the option to buy Oracle-Support ) Certified is pretty different from supported ( OracleVM is certified, others could be supported ) With Oracle VM you may not require to reproduce your issue(s) on physical server Oracle VM is the only x86 software solution that allows hard-partitioning *** *** see details to these Oracle public links: http://www.oracle.com/technetwork/server-storage/vm/ovm-hardpart-168217.pdf http://www.oracle.com/us/corporate/pricing/partitioning-070609.pdf people started asking to migrate from third party virtualization software (ex. RH KVM, VMWare) to Oracle VM. Migrating RH KVM guest to Oracle VM. OracleVM has a built-in P2V utility ( Official Documentation ) but in some cases we can't use it, due to : network inaccessibility between hypervisors ( KVM and OVM ) network slowness between hypervisors (KVM and OVM) size of the guest virtual-disks Here you'll find a step-by-step guide to "manually" migrate a guest machine from KVM to OVM. 1. Verify source guest characteristics. Using KVM web console you can verify characteristics of the guest you need to migrate, such as: CPU Cores details Defined Memory ( RAM ) Name of your guest Guest operating system Disks details ( number and size ) Network details ( number of NICs and network configuration ) 2. Export your guest in OVF / OVA format.  The export from Redhat KVM ( kernel virtual machine ) will create a structured export of your guest: [root@ovmserver1 mnt]# lltotal 12drwxrwx--- 5 36 36 4096 Oct 19 2012 b8296fca-13c4-4841-a50f-773b5139fcee b8296fca-13c4-4841-a50f-773b5139fcee is the ID of the guest exported from RH-KVM [root@ovmserver1 mnt]# cd b8296fca-13c4-4841-a50f-773b5139fcee/[root@ovmserver1 b8296fca-13c4-4841-a50f-773b5139fcee]# ls -ltrtotal 12drwxr-x--- 4 36 36 4096 Oct 19  2012 masterdrwxrwx--- 2 36 36 4096 Oct 29  2012 dom_mddrwxrwx--- 4 36 36 4096 Oct 31  2012 images images contains your virtual-disks exported [root@ovmserver1 b8296fca-13c4-4841-a50f-773b5139fcee]# cd images/[root@ovmserver1 images]# ls -ltratotal 16drwxrwx--- 5 36 36 4096 Oct 19  2012 ..drwxrwx--- 2 36 36 4096 Oct 31  2012 d4ef928d-6dc6-4743-b20d-568b424728a5drwxrwx--- 2 36 36 4096 Oct 31  2012 4b241ea0-43aa-4f3b-ab7d-2fc633b491a1drwxrwx--- 4 36 36 4096 Oct 31  2012 .[root@ovmserver1 images]# cd d4ef928d-6dc6-4743-b20d-568b424728a5/[root@ovmserver1 d4ef928d-6dc6-4743-b20d-568b424728a5]# ls -ltotal 5169092-rwxr----- 1 36 36 187904819200 Oct 31  2012 4c03b1cf-67cc-4af0-ad1e-529fd665dac1-rw-rw---- 1 36 36          341 Oct 31  2012 4c03b1cf-67cc-4af0-ad1e-529fd665dac1.meta[root@ovmserver1 d4ef928d-6dc6-4743-b20d-568b424728a5]# file 4c03b1cf-67cc-4af0-ad1e-529fd665dac14c03b1cf-67cc-4af0-ad1e-529fd665dac1: LVM2 (Linux Logical Volume Manager) , UUID: sZL1Ttpy0vNqykaPahEo3hK3lGhwspv 4c03b1cf-67cc-4af0-ad1e-529fd665dac1 is the first exported disk ( physical volume ) [root@ovmserver1 d4ef928d-6dc6-4743-b20d-568b424728a5]# cd ../4b241ea0-43aa-4f3b-ab7d-2fc633b491a1/[root@ovmserver1 4b241ea0-43aa-4f3b-ab7d-2fc633b491a1]# ls -ltotal 5568076-rwxr----- 1 36 36 107374182400 Oct 31  2012 9020f2e1-7b8a-4641-8f80-749768cc237a-rw-rw---- 1 36 36          341 Oct 31  2012 9020f2e1-7b8a-4641-8f80-749768cc237a.meta[root@ovmserver1 4b241ea0-43aa-4f3b-ab7d-2fc633b491a1]# file 9020f2e1-7b8a-4641-8f80-749768cc237a9020f2e1-7b8a-4641-8f80-749768cc237a: x86 boot sector; partition 1: ID=0x83, active, starthead 1, startsector 63, 401562 sectors; partition 2: ID=0x82, starthead 0, startsector 401625, 65529135 sectors; startsector 63, 401562 sectors; partition 2: ID=0x82, starthead 0, startsector 401625, 65529135 sectors; partition 3: ID=0x83, starthead 254, startsector 65930760, 8385930 sectors; partition 4: ID=0x5, starthead 254, startsector 74316690, 135395820 sectors, code offset 0x48 9020f2e1-7b8a-4641-8f80-749768cc237a is the second exported disk, with partition 1 bootable 3. Prepare the new guest on Oracle VM. By Ovm-Manager we can prepare the guest where we will move the exported virtual-disks; under the Tab "Servers and VMs": click on  and create your guest with parameters collected before (point 1): - add NICs on different networks: - add virtual-disks; in this case we add two disks of 1.0 GB each one; we will extend the virtual disk copying the source KVM virtual-disk ( see next steps ) - verify virtual-disks created ( under Repositories tab ) 4. Verify OVM virtual-disks names. [root@ovmserver1 VirtualMachines]# grep -r hyptest_rdbms * 0004fb0000060000a906b423f44da98e/vm.cfg:OVM_simple_name = 'hyptest_rdbms' [root@ovmserver1 VirtualMachines]# cd 0004fb0000060000a906b423f44da98e [root@ovmserver1 0004fb0000060000a906b423f44da98e]# more vm.cfgvif = ['mac=00:21:f6:0f:3f:85,bridge=0004fb001089128', 'mac=00:21:f6:0f:3f:8e,bridge=0004fb00101971d'] OVM_simple_name = 'hyptest_rdbms' vnclisten = '127.0.0.1' disk = ['file:/OVS/Repositories/0004fb00000300004f17b7368139eb41/ VirtualDisks/0004fb000012000097c1bfea9834b17d.img,xvda,w', 'file:/OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb0000120000cde6a11c3cb1d0be.img,xvdb,w'] vncunused = '1' uuid = '0004fb00-0006-0000-a906-b423f44da98e' on_reboot = 'restart' cpu_weight = 27500 memory = 32768 cpu_cap = 0 maxvcpus = 8 OVM_high_availability = True maxmem = 32768 vnc = '1' OVM_description = '' on_poweroff = 'destroy' on_crash = 'restart' name = '0004fb0000060000a906b423f44da98e' guest_os_type = 'linux' builder = 'hvm' vcpus = 8 keymap = 'en-us' OVM_os_type = 'Oracle Linux 5' OVM_cpu_compat_group = '' OVM_domain_type = 'xen_hvm' disk2 ovm ==> /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb0000120000cde6a11c3cb1d0be.img disk1 ovm ==> /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb000012000097c1bfea9834b17d.img Summarizing disk1 --source ==> /mnt/b8296fca-13c4-4841-a50f-773b5139fcee/images/4b241ea0-43aa-4f3b-ab7d-2fc633b491a1/9020f2e1-7b8a-4641-8f80-749768cc237a disk1 --dest ==> /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb000012000097c1bfea9834b17d.img disk2 --source ==> /mnt/b8296fca-13c4-4841-a50f-773b5139fcee/images/d4ef928d-6dc6-4743-b20d-568b424728a5/4c03b1cf-67cc-4af0-ad1e-529fd665dac1 disk2 --dest ==> /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb0000120000cde6a11c3cb1d0be.img 5. Copy KVM exported virtual-disks to OVM virtual-disks. Keeping your Oracle VM guest stopped you can copy KVM exported virtual-disks to OVM virtual-disks; what I did is only to locally mount the filesystem containing the exported virtual-disk ( by an usb device ) on my OVS; the copy automatically resize OVM virtual-disks ( previously created with a size of 1GB ) . nohup cp /mnt/b8296fca-13c4-4841-a50f-773b5139fcee/images/4b241ea0-43aa-4f3b-ab7d-2fc633b491a1/9020f2e1-7b8a-4641-8f80-749768cc237a /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/0004fb000012000097c1bfea9834b17d.img & nohup cp /mnt/b8296fca-13c4-4841-a50f-773b5139fcee/images/d4ef928d-6dc6-4743-b20d-568b424728a5/4c03b1cf-67cc-4af0-ad1e-529fd665dac1 /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/0004fb0000120000cde6a11c3cb1d0be.img & 7. When copy completed refresh repository to aknowledge the new-disks size. 7. After "refresh repository" is completed, start guest machine by Oracle VM manager. After the first start of your guest: - verify that you can see all disks and partitions - verify that your guest is network reachable ( MAC Address of your NICs changed ) Eventually you can also evaluate to convert your guest to PVM ( Paravirtualized virtual Machine ) following official Oracle documentation. Ciao Simon COTER ps: next-time I'd like to post an article reporting how to manually migrate Virtual-Iron guests to OracleVM.  Comments and corrections are welcome. 

  Read the article

• Hour-long shutdown duration "shutting down hyper-v virtual machine management service"

  - by icelava

  I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE Ok so i left it hanging over an hour while attending to other matters, and thankfully the host cleanly restarted. I can operate the guest machines fine now. Phew. Hyper-V must have been crawling for some reason. The VMs have been observed to become slow in the past when the host has been up for a long duration (two weeks to a month), but never this slow. Would love to know what types of performance monitoring items i can observe to give a hint why this can happen. UPDATE 2012-02-13 In the months ever since, Hyper-V has stalled into this state another two times. It appears so randomly and without any error event logs to hint what is causing it enter this "drunkard" state. Just an Hyper-V management service timeout. Log Name: System Source: Service Control Manager Date: 13/2/2012 9:16:48 AM Event ID: 7043 Task Category: None Level: Error Keywords: Classic User: N/A Computer: elune Description: The Hyper-V Virtual Machine Management service did not shut down properly after receiving a preshutdown control. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7043</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2012-02-13T01:16:48.882901900Z" /> <EventRecordID>567844</EventRecordID> <Correlation /> <Execution ProcessID="764" ThreadID="8484" /> <Channel>System</Channel> <Computer>elune</Computer> <Security /> </System> <EventData> <Data Name="param1">Hyper-V Virtual Machine Management</Data> </EventData> </Event> The only means out of it is to restart the system.

  Read the article

• WNDR3700 Router + Cisco SG200-08 + LACP + Dual Uplink

  - by kobaltz

  Background I have a storage server that has several virtual machine images stored on them. I would store them locally, but I have limited space on my desktop (using SSD storage). I would like to increase the bandwidth between the desktop and the storage server by using two NICs on each computer. My original configuration allowed about 55MBps between the desktop and storage server. This storage server also has several TBs of documents, pictures, movies, vms, and ISO/programs. The storage server has 8 1.5TB hard drives in a RAID 10 configuration with a hardware RAID controller. The benchmarks on the RAID 10 are about 300MBps. Configuration In short, I am trying to bridge my switch and router. The switch is a small 8 port Cisco smart switch that supports 802.3ad LACP. I have two computers plugged into the switch, each with 2 Intel Gigabit NICs. The first computer is a Windows 7 machine that has the Intel ANS software installed. I have LACP configured with the computer and now show 3 NICs (2 Physical + 1 TEAM Virtual @ 2Gbps). It looks like this computer is configured correctly. I trunked the two ports that this computer is plugged into with the switch's web interface. The second computer is a homebrew storage box running debian. I also have the bonding enabled on this machine and the switch configured with LACP. Without having the WNDR3700 router in the picture yet, I am able to communicate between the Windows 7 machine and the debian box since they both have static IP addresses. With LACP enabled on both machines I am getting about 106-108MBps speeds. Issue I plug in a network cable from the switch into the router and enable DHCP on the desktop. I saw no need to have a static address on the desktop. My transfer rates are still from 106MBps-108MBps. While this is still a boost, I am trying to figure out how to get about 140-180MBps. I am thinking that I need to increase the bandwidth from the router to the switch. My switch allows 4 groups for port trunking. I plugged in a second network cable from the router to the switch. My question is, what is the proper way to fix this issue. Should I port trunk the two ports that are going from the switch to the router? Keep in mind that the router is a WNDR3700 and is unsure whether or not it supports LACP. I do have OpenWRT installed on the router, but it still wasn't clear in any documentation that I found if it supported 802.3ad LACP standards. I am also wondering if there needs to be anything changed within the Cisco settings. [Edit] - Corrected some numbers, wasn't really paying attention. It looks like the speeds though at least two NICs are bonded with LACP is still reaching the max bandwidth of one port. Is there a way to configure the switch so that I can increase this bandwidth? Also, on the storage server, I had a couple of extra NICs laying around and threw them on there as well. Another EDIT and More Findings I happened to look at the traffic of each individual NIC and think that I see the problem. I tested with a simple transfer for a 4GB file. I noticed that only one of the NICs was taking the load of the traffic. I then copied the file back to the Storage Server and noticed that the other NIC was sending out the traffic. I have 802.3ad LACP enabled on the two NICs and I see that it gets enabled dynamically on the switch's interface. Should I be using Static Link Aggregation?

  Read the article

• Distributed and/or Parallel SSIS processing

  - by Jeff

  Background: Our company hosts SaaS DSS applications, where clients provide us data Daily and/or Weekly, which we process & merge into their existing database. During business hours, load in the servers are pretty minimal as it's mostly users running simple pre-defined queries via the website, or running drill-through reports that mostly hit the SSAS OLAP cube. I manage the IT Operations Team, and so far this has presented an interesting "scaling" issue for us. For our daily-refreshed clients, the server is only "busy" for about 4-6 hrs at night. For our weekly-refresh clients, the server is only "busy" for maybe 8-10 hrs per week! We've done our best to use some simple methods of distributing the load by spreading the daily clients evenly among the servers such that we're not trying to process daily clients back-to-back over night. But long-term this scaling strategy creates two notable issues. First, it's going to consume a pretty immense amount of hardware that sits idle for large periods of time. Second, it takes significant Production Support over-head to basically "schedule" the ETL such that they don't over-lap, and move clients/schedules around if they out-grow the resources on a particular server or allocated time-slot. As the title would imply, one option we've tried is running multiple SSIS packages in parallel, but in most cases this has yielded VERY inconsistent results. The most common failures are DTExec, SQL, and SSAS fighting for physical memory and throwing out-of-memory errors, and ETLs running 3,4,5x longer than expected. So from my practical experience thus far, it seems like running multiple ETL packages on the same hardware isn't a good idea, but I can't be the first person that doesn't want to scale multiple ETLs around manual scheduling, and sequential processing. One option we've considered is virtualizing the servers, which obviously doesn't give you any additional resources, but moves the resource contention onto the hypervisor, which (from my experience) seems to manage simultaneous CPU/RAM/Disk I/O a little more gracefully than letting DTExec, SQL, and SSAS battle it out within Windows. Question to the forum: So my question to the forum is, are we missing something obvious here? Are there tools out there that can help manage running multiple SSIS packages on the same hardware? Would it be more "efficient" in terms of parallel execution if instead of running DTExec, SQL, and SSAS same machine (with every machine running that configuration), we run in pairs of three machines with SSIS running on one machine, SQL on another, and SSAS on a third? Obviously that would only make sense if we could process more than the three ETL we were able to process on the machine independently. Another option we've considered is completely re-architecting our SSIS package to have one "master" package for all clients that attempts to intelligently chose a server based off how "busy" it already is in terms of CPU/Memory/Disk utilization, but that would be a herculean effort, and seems like we're trying to reinvent something that you would think someone would sell (although I haven't had any luck finding it). So in summary, are we missing an obvious solution for this, and does anyone know if any tools (for free or for purchase, doesn't matter) that facilitate running multiple SSIS ETL packages in parallel and on multiple servers? (What I would call a "queue & node based" system, but that's not an official term). Ultimately VMWare's Distributed Resource Scheduler addresses this as you simply run a consistent number of clients per VM that you know will never conflict scheduleing-wise, then leave it up to VMWare to move the VMs around to balance out hardware usage. I'm definitely not against using VMWare to do this, but since we're a 100% Microsoft app stack, it seems like -someone- out there would have solved this problem at the application layer instead of the hypervisor layer by checking on resource utilization at the OS, SQL, SSAS levels. I'm open to ANY discussion on this, and remember no suggestion is too crazy or radical! :-) Right now, VMWare is the only option we've found to get away from "manually" balancing our resources, so any suggestions that leave us on a pure Microsoft stack would be great. Thanks guys, Jeff

  Read the article

< Previous Page | 34 35 36 37 38 39 40  | Next Page >