Search Results

Search found 16628 results on 666 pages for 'setup kit'.

Page 380/666 | < Previous Page | 376 377 378 379 380 381 382 383 384 385 386 387  | Next Page >

• Windows XP does not list WPA wireless networks

  - by Tomalak

  What can be the reason that Windows XP does not show WPA-encrypted wireless networks? The laptop I have problems with is an older model (Toshiba Satellite Pro 6100) with Windows XP SP3 on it, fresh install. The wireless network card in it is an Agere product that lists as "Toshiba Wireless LAN Mini PCI Card". The networks showed up perfectly before I first tried to connect to one (it was set to WPA2). The connection failed (the card supports WPA only), then something must have happend and Windows hides these networks now. A manually configured WPA setup via Windows' own wizard works, I'm using it right now. The network just won't show up in the list of available network on its own. I suspect that XP incorrectly set a flag somewhere that this network card does not support WPA. Is there such a flag, and if so, how can I change it back?

  Read the article

• Configure Postfix to use external MX servers for delivery of local mail if user is unknown

  - by mr.b

  I have a following setup: linux box with postfix configured to be responsible for example.com domain domain's MX servers are configured so that mail sent to example.com is sent to google mail servers several user accounts on linux machine exist (same machine also hosts example.com site) When someone from the outside attempts to send mail to address ending with @example.com, it gets routed to google mail (and there handled appropriately). When linux machine tries to send mail to outside world, mail is delivered correctly, as reverse dns and spf records are configured correctly, so linux machine is valid mail sender for example.com domain (along with google mail servers). However, here's the problem. When php application (hosted at linux box) tries to send mail to [email protected] (and someuser doesn't exist on linux box), it fails, since it doesn't even consult google mail servers, but postfix smtp locally concludes that "someuser" is unknown. So, the question is: how do I tell postfix to relay mails sent to @example.com domain to google mail servers (so, to servers specified in MX records), IF and only if a mailbox is not found locally.

  Read the article

• Windows 7 Bootcamp to see data doubler SATA SSD in Optical Bay Connector

  - by bumble_bee_tuna

  Hi I purchased a OWC data doubler http://eshop.macsales.com/item/OWC/DDAMBS0GB/ ... Long story short it lets you add a second HD to your macbook pro in place of the cd/dvd drive (which is useless anyway, impossible to get stuff out when stuck). My current setup is 600gb intel SSD bootdrive 100gb partition for OSX / 500gb for Windows 7 Prof from Bootcamp (use 99 % of time). My desire is to have a second 300gb SSD to run disk intensive VM's off of. So I added a second 300gb intel SSD (again, NO desire to boot off of) on the sata optical port. I can see the drive no problem if I boot in to OSX, however, can't see it in disk management on Win7 ??? Any ideas similar experience ... Funny thing is I can see it in "Device Manager Disk Drivers" but not Disk Management ??? Also no I don't want to use Fusion/Parallels this is a waste of resources for me.

  Read the article

• nginx proxy pass redirect through load balancer

  - by Brian

  I have several backend webservers that are load-balanced using LVS. These machines have only internal non-routable IPs on them. The load-balancer is the only machine with an external IP. This setup works great. I would like to add another webserver for image serving, but it will not be part of the load-balanced pool. Is it possible to proxy pass from the load-balanced web servers to the image server and have the response redirected to the client? Client--external LB--internal web server--internal image server I've gotten proxy pass working when I remove the LB from the equation, but no luck when trying to use it.

  Read the article

• Port numbers in Visual Studio projects and IIS

  - by aspdotnetuser

  I have a few questions about localhost and port numbers as this is an area where I do not have a lot of knowledge, and because I recently had to work with setting up Visual Studio projects and IIS and there are things I'm not clear on. I have the following questions on the things I find confusing. I thought it made more sense to include them all in one question instead of making separate questions. I have noticed a random port number is generated with projects I have worked on in the past, but I recently saw a project where the port number was fixed. What is the purpose of having a fixed/default localhost port number? i.e is it particularly useful on projects that have many programmers working on the project? If a solution contains multiple projects (for example, WCF services, Domain, MVC/Web pages), is it possible to setup a different localhost port for each of them? If so, what is the benefit of this? If a solution contains multiple projects and has different localhost urls/port numbers, must there be a corresponding website (and application pool) for each project in IIS? Or just for the project that contains the actual web pages?

  Read the article

• Problem reinstalling GRUB

  - by DisgruntledGoat

  I have a PC that dual-boots Ubuntu and Windows Vista. I recently reinstalled Windows Vista after some problems and now the bootloader's gone. I've been trying to follow this Ubuntu community guide but it's not working. I have Grub Legacy according to the first part (I installed Ubuntu 9.04 originally then upgraded). From the 9.04 LiveCD, I ran this: sudo grub-install --root-directory=/media/disk /dev/sda5 sda5 is the Ubuntu partition. I get this output: grub-probe: error: Cannot open `/boot/grub/device.map` [: 494: =: unexpected operator Installing GRUB to /dev/sda5 as (hd0,4)... Installation finished.No errors reported. This is the contents...(etc) (hd0) /dev/sda In the bit below, when I run setup (hd0) I get an error, "Error 17: Cannot mount selected partition" Little help?

  Read the article

• Running CORN job on Ubuntu server for SugarCRM

  - by Logik

  i am pretty inexperienced in Linux.So be descriptive on your answer. My environment :Local Linux server 12.04 hosting Sugar CRM 6.5.2. There is area in sugar CRM called scheduler. I can configured some predefined jobs here. in my case i am trying to run email reminders (ever min/hour/day/month). For this scheduler to be effective, i read some where i need to setup CRON job. So i did some research & finally put following lines in CRONTAB for the root user, as per instructions given in sugarCRM. cd /var/www/crm; php -f cron.php /dev/null 2&1 Well i am creating contracts in my sugarCRM (AOS module) & i want email reminders to be sent for these contracts to the concern person. Now my sugarCRM email is configured correctly & i can send test emails using it. But the CRON + scheduler not giving any result. I can't receive any emails. Then i tried to read /var/log/syslog & it is showing entry for following line each minute. Oct 27 15:03:01 unicomm CRON[28182]: (root) CMD (cd /var/www/crm; php -f cron.php /dev/null 2&1) I've few questions: 1) what does the CRON job line i've added in crontab mean? cd /var/www/crm; php -f cron.php /dev/null 2&1 is not making any sense to me. 2) How am i suppose to get this thing work? I've searched a lot (including SugarCRM forum), but no luck.

  Read the article

• High disk time on sql-server

  - by Patrik

  Hi We have a dedicated sql-server 2008 r2 enterprise edition. The setup is: D: (data files) - stored on local ssd disks (not the same disks as log files) (raid 10) E: (log files) - stored on local ssd disks (not the same disks as data files) (raid 1) F: (transaction log backup) - stored remote on a SAN Today we moved our log files to new disks (from F: to E:). From a shared volume ( F:(SAN)) to dedicated local disks (E:). What then happend was that the "disk time", "avg. transfer time" and "avg disk write queue length" increased on the volume where we have the data files (D:) (not on the volume where the log files are located). The data volume and log volume does not share disks, however they share the same controller card. "Disk idle time" is low for all volumes. One thought is ofcourse that the controller card might be overloaded. But, we need more ideas on where the problem might be.

  Read the article

• Replacing sick NTP server source and re-synching (with internal time currently 2 minutes late)

  - by l0c0b0x

  One of the external NTP servers (the primary one--currently) we're using as source seems to not be responding to NTP calls. Unfortunately, on our core router (Cisco 6509), the NTP functionality hasn't switched to the secondary NTP external server as it was expected. As a result, our core router which is pretty much our main internal NTP source is 2 minutes late. I'm planning to fix the external router issue by making the external NTP source be the one currently working. I'm wondering, how much will a 2 minute change affect my users and services? Specially since these days, we're heavily relying on certificate-based authentication. We're a Windows/Cisco shop. Internal NTP setup: [Core Router 1 / Cisco 6509]: looking out to two external NTP servers (in which the primary one is not responding to NTP calls) [Core Router 2]: Synching with Core router 1 (primary), working external router (secondary) [Other Cisco network devices]: Synching with Core router 1 (primary), core router 2 (secondary) [Domain controller(s)]: Synching with Core router 1 [All windows clients/servers]: Synching with domain controllers

  Read the article

• Linux servers vs Windows IIS sense of usage "free" solutions

  - by Rob

  I wonder what is the sense of using "free" open source solutions for serious webstie applications? Crawled and read many testing of servers performance and there is one conclusion: IIS seems to be the best choice for high load applicatiom. I mean cost effective. Especially this concers to Nginx PLUS and LiteSpeed Users where subscriptions paid for e.g. LoadBalacer and extra support cost a lot in fact. I'm asking then where it's "free" then or "cheap" in this case? Assuming even little higher cost of dedicated servers with Windows still seems like Windows looks cheaper. At it's basic setup Windows 2012 with IIS offer much more than std LAMP, or other NGINX config.... Maybe am I missing sth ? I mean only general case for someone who did not already started his app. I know exactly that the cheapest solution is the one someone is skilled. Has anyone done already such real costs calculation for example scenarios?

  Read the article

• How to Configure Sendmail / Webmin for second IP?

  - by user310594

  Hi, LAMP Centos5.4 Webmin Until recently I have had all domains using "server1.example.com" Now I have newdomain.com on second.ip.address.works (works for DNS that is) Please tell me how to setup sendmail so the mail is sent from the second ip address? This is new for me: IF I need to create a second server called "server2.domain2.com", then please tell exactly how since I'm only experienced with one server per VPS. Whether "server2.domain2.com" needs to be created or not, here is exactly what is needed: # Mail being sent from domains using ns1.example.com needs to be sent from that server and that IP. Mail being sent from domains using nsother.example2.com sent from that IP + how to set up the second server / hostname, if needed. Thank you.

  Read the article

• Installing BURG (NO MBR!)

  - by StepTNT

  I'd like to install BURG but I don't want it to overwrite my MBR. That's because I've got two bootloader in my system : 1) Default Windows 7 bl in my MBR 2) Grub in /dev/sda2 With the first power button, it will boot as Grub is not installed, so it simply loads Windows, with the second button it boots from /dev/sda2, loading Grub and then Kubuntu. Now I want to replae Grub with Burg. I've installe Burg with burg-install /dev/sda2 --force because I don't want my MBR to be overwritten (pressing the first power button MUST load Windows and avoid showing any sign of Linux things). Setup was completed without errors, and everything seems to work fine : if I open burg-manager it loads my settings, allowing me to change them and to test everything with burg-emu (that works as I want to). So, everything seems fine, Burg's installed, I've changed my settings but.. If I use the second power button, it still loads Grub! (Even a different version from the default Kubuntu one). So, here's the question : How can I replace GRUB that's on /dev/sda2 with BURG and WITHOUT writing it to my MBR? Thanks :)

  Read the article

• Update a war on Tomcat start up

  - by pater

  I want to setup an update process for an application running on Tomcat. The server which hosts tomcat is only open during working hours (it is an intraner application for a small company). I was thinking that I could upload the new war to the server and set up "something" to run on the next server boot. This something could be a bat file that will be executed on server start up but before the start up of the Tomcat service and it will delete the old war and its exploded folder. When I update manually the war I also delete the work folder of Tomcat (just to be sure). I know about hot deployment but I do not consider it an option since I am not very sure for the implications it might have on the users current working sessions. Is there a way to run such a bat file before Tomcat start up or an alternative way to do this update? Tomcat version isn't an issue. Now is running Tomcat 6 but I can upgrade to version 7 if needed.

  Read the article

• Windows Server 2008 R2 DNS Server not working?

  - by wolfvilleian

  I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

  Read the article

• How to diagnose computer lockups and freezes?

  - by Scott Mitchell

  I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6 MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256 MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Resolution I have never did figure out the particular problems, but based on the suggestions here and elsewhere, I'm presuming it was a motherboard issue. In any event, I recently upgraded my system, buying a new motherbeard, PSU, CPU, and RAM, and that new rig has been working splendidly the past several weeks. I am using the same graphic cards as in the old setup, so I think it's safe to reason that they weren't the cause of the problem.

  Read the article

• Joomla Secondary Users

  - by Gaz_Edge

  Background I have a joomla based application. My customers sign up and they register as a user on the site. My customers (primary customers) then have their own space on the site that they can then setup their own customers (secondary customer). Question/Problem The problem I am having is that I need to tag each secondary customer to a primary customer. I thought about just creating a new component and having a separate table that includes all the secondary customers. The problem is that I then lose out on all the authentication, session handling and login/logout that the core joomla _users component offers. I then thought about just having all the users in the core _users table and add the primary customer associated with each secondary customer to a field in a profile plugin. This would work for the most part, but this means that primary customers cannot create a secondary customer with a user name that already exists in the _users table. I didn't think this would be an issue, but several of my primary customers (currently only test users) have been confused by the site telling them a username is not available, since they can only see the names of their own secondary customers. Any ideas on some architectural changes I could make to solve this?

  Read the article

• Operating System Not Found - BIOS recognizes, Live OS doesn't (Laptop)

  - by Klaus Borges

  Here's the deal: I have a multi-partitioned hard drive on my laptop set up with GRUB. I got a blue-screen while working on Windows 7 and when rebooting I got the Operating System Not Found error message. I rebooted the computer once again and entered the BIOS setup just to see if recognized my HDD - it did. Next step for me was booting a Live CD and seeing if I could repair GRUB or at least check if something changed on the partitions, but it doesn't seem to recognize anything there. Tried blkid, fdisk -l, not even GParted can see it. What should I do?

  Read the article

• RAID 1 not performing as expected

  - by Faken

  I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

  Read the article

• Has anyone experienced "Screen Painting" issues with RealVNC?

  - by cybersylum

  I've just setup remote access to a Windows XP box using RealVNC. When the user runs an app, they expierence issues with "screen painting" - the screen doesn't paint well, except for a radius around the mouse cursor. The app is displaying a calendar. I am not sure what it is written in (think it is a .NET app) Have no problems getting/staying connected. Initially it seemed to be working fine. I have looked through all of the settings as far as compression and speed. I can replicate the issue from more than 1 location. The hosting Internet connection is DSL.

  Read the article

• infiniband network between 3 servers

  - by grumpf

  Let's say I have 3 different servers, each one with an infiniband card. Each card has 2 different ports. (I don't know about the model yet) Is it possible to create 3 different networks and to allow the 3 servers to communicate with each other without any problems? (and any spof). I guess I just have to setup the /etc/hosts correctly. I really don't know about infiniband, so please help me :) Thanks in advance. EDIT: Point is to NOT USE a switch!

  Read the article

• "Bad response to Storage command" when scheduling job with Bacula

  - by Joril

  I have a Bacula setup with 9 clients, and it's working happily. Today I had to add another client, so I went and copied+adapted the existing configuration files from another client, but when I schedule a job for the new client, I get these errors: 20-Mar 17:50 tools-dir JobId 39: Start Backup JobId 39, Job=BackupPresenze2.2012-03-20_17.50.49_04 20-Mar 17:50 tools-dir JobId 39: Using Device "FileStorage" 20-Mar 17:50 presenze2-fd JobId 39: Fatal error: Failed to connect to Storage daemon: bacula.mylan.local:9103 20-Mar 17:50 tools-dir JobId 39: Fatal error: Bad response to Storage command: wanted 2000 OK storage , got 2902 Bad storage From the client I can telnet to bacula.mylan.local:9103 just fine, and jobs for other clients work successfully... What could I check? (Server and client run Ubuntu 10.04, if it's relevant)

  Read the article

• Netgear Router missing Wireless Configuration Menu Link

  - by ccisystems

  I have a Netgear WiFi router DG834G v3. On it it says it's a WiFi, ADSL 2+ modem, switch, etc. There is an antenna on the back and a WiFi indicator on the front. However, when I connect to it via the web interface, the wireless setup link is missing from the menu. The top label indicates it is a DG834 (without G). I have received it from a friend and was really looking forward to using it but I really need the WiFi part. I looked on Netgear's site as I thought someone must have uploaded the wrong firmware for the device sometime - so I upgraded to the latest firmware, but it still says it's NOT a 'G' device and the wireless menu is nowhere to be found. I'd appreciate a push in the right direction as to what I could do. Is it possible that the WiFi chip is broken or something and the device does not detect it and the firmware reverts the device to a different version?

  Read the article

• Managing products on a an ecommerce site [closed]

  - by John

  I've had a site that sells widgets for many years. I do not inventory my widgets, but the cost of adding them to the site and makings sure the site is current is becoming cost prohibitive. Here are the facts: I sell a single class of widget. I have about 50,000 widgets on my site. I have about 100 vendors that create and dropship the products when they get an order from me via email. Each vendor carries from 50 to 5000 types of widgets. Vendors all have websites with images and descriptions of their products. Each widget is produced in limited supply and usually sell out in 1-5 years. Prices of the widget often go up, sometimes more than 50% before they sell out. My vendors aren't very tech sophisticated. They have websites with their products, but most can't supply an api or database dump. Their websites usually display retail prices to the public, but I login or refer to a price list (usually excel) for wholesale prices. As it stands now, I hire local people to add and describe each widget to our website. It usually takes a person 4 minutes to add a widget to the site. This doesn't include moving to a new vendor. I feel like the upload/edit process is as good as it can get via a form/website. The problem is that it is getting very expensive to upload and keep the widget inventory current. I often get orders for something after it's sold out from the vendor or the price is wrong. This seems like it would be a problem in many industries. Can anyone suggest the cheapest way to upload inventory and ensure prices are current from my vendors? I'm assuming it will involve outsourcing, but I would like ideas on how to setup the compensation model.

  Read the article

• Create an AWS AMI for Ubuntu with GUI which automatically launches web browser

  - by Rory MacDonald

  I've got an ubuntu AMI setup with ubuntu desktop installed and Chrome installed and set to boot on load (via the startup programmes menu within the ubuntu desktop) I've created an image of this AMI, but any time I launch a new instance running this, the Ubuntu GUI doesn't seem to load, until I SSH into the machine, enable VNC and then connect via Chicken VNC to the machine. At that point, the desktop appears to load + starts the browser. I really need the machine to boot and the browser to load without having to VNC into the machine.. Any help would be appreciated.

  Read the article

• Connect to MySQL EC2 Instance outside of VPC

  - by Brian W

  I have a VPC setup with a few EC2 instances inside. I'm attempting to connect to a MySQL database on an EC2 instance outside the VPC, with no luck. I have the security groups on the VPC EC2 instances set to outbound 0.0.0.0/0 which I assumed would let it connect to any outbound connection. I also followed a tutorial on creating a NAT, but wasn't exactly sure how to use it to connect to an external database. In any case, if anyone has experience and knows the proper way to connect to a database outside the VPC, it would be greatly appreciated!

  Read the article

< Previous Page | 376 377 378 379 380 381 382 383 384 385 386 387  | Next Page >