Search Results

Search found 19551 results on 783 pages for 'enterprise library 5'.

Page 381/783 | < Previous Page | 377 378 379 380 381 382 383 384 385 386 387 388  | Next Page >

• Active Directory: trouble adding new DC

  - by ethrbunny

  I have a domain with 3 DCs. One is starting to fail so I brought up a new one. All are running Win 2003. Problem: there appear to be replication issues between the 4 machines but I can't figure out what's causing this. All are registered with the DNS as identically as I can make them. How do I know there is a problem? Nagios is telling me that the other 3 DCs are having KCCEvent errors and the new machine is reporting "failed connectivity" errors. Doing dcdiag on the new machine reports: the host could not be resolved to an IP address. This seems crazy as I log into it using the DNS name. I can ping it from the other three machines using this DNS name as well. repadmin /showreps from the new machine says its seeing the other 3 machines. Doing the same from one of the older machines doesn't show the new machine. I've tried netdiag /repair numerous times. No luck. There are no firewalls running on any of the machines. If I look at Domain info via MMC (on the new machine) it appears that all the information is current. Users, computers, DCs.. its all there. Im puzzled as to what step(s) I've missed in adding this new machine. Suggestions? EDIT: dcdiag from non-working: C:\Documents and Settings\Administrator.BME>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\YELLOW Starting test: Connectivity The host 312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc Although the Guid DNS name (312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu) couldn't be resolved, the server name (yellow.server.edu) resolved to the IP address (10.127.24.79) and was pingable. Check that the IP address is registered correctly with the DNS server. ......................... YELLOW failed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\YELLOW Skipping all tests, because server YELLOW is not responding to directory service requests Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck dcdiag from working: P:\>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\AD1 Starting test: Connectivity ......................... AD1 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\AD1 Starting test: Replications ......................... AD1 passed test Replications Starting test: NCSecDesc ......................... AD1 passed test NCSecDesc Starting test: NetLogons ......................... AD1 passed test NetLogons Starting test: Advertising ......................... AD1 passed test Advertising Starting test: KnowsOfRoleHolders ......................... AD1 passed test KnowsOfRoleHolders Starting test: RidManager ......................... AD1 passed test RidManager Starting test: MachineAccount ......................... AD1 passed test MachineAccount Starting test: Services ......................... AD1 passed test Services Starting test: ObjectsReplicated ......................... AD1 passed test ObjectsReplicated Starting test: frssysvol ......................... AD1 passed test frssysvol Starting test: frsevent ......................... AD1 passed test frsevent Starting test: kccevent ......................... AD1 passed test kccevent Starting test: systemlog ......................... AD1 passed test systemlog Starting test: VerifyReferences ......................... AD1 passed test VerifyReferences Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck P:\>

  Read the article

• JBoss 6 unpacks jars from WEB-INF/lib of war

  - by Maxym

  when I start JBoss 6 I see that it unpacks all jar files from WEB-INF/lib in tmp/vfs/automountXXX folder. E.g. jackrabbit-server.war contains library asm-3.1.jar, then in tmp folder I see the following folders with files: asm-3.1.jar-83dc35ead0d41d41/asm-3.1.jar asm-3.1.jar-2a48f1c13ec7f25d/contents/"unpacked asm-3.1.jar" it does not take files from my.ear/lib only WEB-INF/lib... Why is it so? And is here any way to prevent it doing so? It just slows down application server starting (and stopping), what is not that comfortable at development... If it is somehow related to JavaEE 6 specification and ejb-jars, which can be located now in WEB-INF/lib, so I don't have such libraries in my war files... UPDATE: actually when I repack jackrabbit-server.war to jackrabbit-server.ear which contains jackrabbit-server.war and moved all its libraries to jackrabbit-server.ear/lib then I still see two folders in tmp: asm-3.1.jar-215a36131ebb088e/asm-3.1.jar asm-3.1.jar-14695f157664f00/contents/ but in this case last folder is empty. So it still creates two folders, but does not unpack my library. Also I use exploded deployment so the question is only about jar files, not unpacking ear/war.

  Read the article

• Programatically rebuild .exd-files when loading VBA

  - by aspartame

  Hi, After updating Microsoft Office 2007 to Office 2010 some custom VBA scripts embedded in our software failed to compile with the following error message: Object library invalid or contains references to object definitions that could not be found. As far as I know, this error is a result of a security update from Microsoft (Microsoft Security Advisory 960715). When adding ActiveX-controls to VBA scripts, information about the controls are stored in cache files on the local hard drive (.exd-files). The security update modified some of these controls, but the .exd-files were not automatically updated. When the VBA scripts try to load the old versions of the controls stored in the cached files, the error occurs. These cache-files must be removed from the hard drive in order for the controls to load successfully (which will create new, updated .exd-files automatically). What I would like to do is to programatically (using Visual C++) remove the outdated .exd-files when our software loads. When opening a VBA project using CApcProject::ApcProject.Open I set the following flag:axProjectThrowAwayCompiledState. TestHR(ApcProject.Open(pHost, (MSAPC::AxProjectFlag) (MSAPC::axProjectNormal | MSAPC::axProjectThrowAwayCompiledState))); According to the documentation, this flag should cause the VBA project to be recompiled and the temporary files to be deleted and rebuilt. I've also tried to update the checksum of the host application type library which should have the same effect. However none of these fixes seem to do the job and I'm running out of ideas. Help is very much appreciated!

  Read the article

• PHP package manager

  - by Mathias

  Hey, does anyone know a package manager library for PHP (as e.g. apt or yum for linux distros) apart from PEAR? I'm working on a system which should include a package management system for module management. I managed to get a working solution using PEAR, but using the PEAR client for anything else than managing a PEAR installation is not really the optimal solution as it's not designed for that. I would have to modify/extend it (e.g. to implement actions on installation/upgrade or to move PEAR specific files like lockfiles away from the system root) and especially the CLI client code is quite messy and PHP4. So maybe someone has some suggestions for an alternative PEAR client library which is easy to use and extend (the server side has some nice implementations like Pirum and pearhub) for completely different package management systems written in PHP (ideally including dependency tracking and different channels) for some general ideas how to implement such a PM system (yes, I'm still tinkering with the idea of implementing such a system from scratch) I know that big systems like Magento and symfony use PEAR for their PM. Magento uses a hacked version of the original PEAR client (which I'd like to avoid), symfony's implementation seems quite integrated with the framework, but would be a good starting point to at least write the client from scratch. Anyway, if anybody has suggestions: please :)

  Read the article

• CONSOLE appender was turned off. But JBoss still writes some traces to STDOUT

  - by Vladimir Bezugliy

  CONSOLE appender was turned off. But JBoss still writes some traces to STDOUT during startup. Why? C:\as\jboss-5.1.0.GA\bin>start.cmd Calling C:\as\jboss-5.1.0.GA\bin\run.conf.bat =============================================================================== JBoss Bootstrap Environment JBOSS_HOME: C:\as\jboss-5.1.0.GA JAVA: C:\as\jdk1.6.0_07\bin\java JAVA_OPTS: -Dprogram.name=run.bat -Xms512M -Xmx758M -XX:MaxPermSize=256M -server CLASSPATH: C:\as\jboss-5.1.0.GA\bin\run.jar =============================================================================== 13:11:25,080 INFO [ServerImpl] Starting JBoss (Microcontainer)... 13:11:25,080 INFO [ServerImpl] Release ID: JBoss [The Oracle] 5.1.0.GA (build: SVNTag=JBoss_5_1_0_GA date=200905221053) 13:11:25,080 INFO [ServerImpl] Bootstrap URL: null 13:11:25,080 INFO [ServerImpl] Home Dir: C:\as\jboss-5.1.0.GA 13:11:25,080 INFO [ServerImpl] Home URL: file:/C:/as/jboss-5.1.0.GA/ 13:11:25,080 INFO [ServerImpl] Library URL: file:/C:/as/jboss-5.1.0.GA/lib/ 13:11:25,080 INFO [ServerImpl] Patch URL: null 13:11:25,080 INFO [ServerImpl] Common Base URL: file:/C:/as/jboss-5.1.0.GA/common/ 13:11:25,080 INFO [ServerImpl] Common Library URL: file:/C:/as/jboss-5.1.0.GA/common/lib/ 13:11:25,080 INFO [ServerImpl] Server Name: web 13:11:25,080 INFO [ServerImpl] Server Base Dir: C:\as\jboss-5.1.0.GA\server 13:11:25,080 INFO [ServerImpl] Server Base URL: file:/C:/as/jboss-5.1.0.GA/server/ 13:11:25,080 INFO [ServerImpl] Server Config URL: file:/C:/as/jboss-5.1.0.GA/server/web/conf/ 13:11:25,080 INFO [ServerImpl] Server Home Dir: C:\as\jboss-5.1.0.GA\server\web 13:11:25,080 INFO [ServerImpl] Server Home URL: file:/C:/as/jboss-5.1.0.GA/server/web/ 13:11:25,080 INFO [ServerImpl] Server Data Dir: C:\as\jboss-5.1.0.GA\server\web\data ...

  Read the article

• how to have publishing, blog and wiki features together?

  - by George2

  Hello everyone, I am using SharePoint 2007 Enterprise + Publishing portal template + Windows Server 2008. I want to have blog and wiki features as well as publishing portal features. Any ideas how to integrate publishing portal, blog and wiki? For integrate, I mean using the same user name and password to pass through authentication of publishing portal, blog and wiki. And should I setup 3 different site collections for publishing portal, blog and wiki (I find if I setup publishing portal site collection, I can not create blog and wiki sub-site)? thanks in advance, George

  Read the article

• Boost Date_Time problem compiling a simple program

  - by Andry

  Hello! I'm writing a very stupid program using Boost Date_Time library. int main(int srgc, char** argv) { using namespace boost::posix_time; date d(2002,Feb,1); //an arbitrary date ptime t1(d, hours(5)+nanosec(100)); //date + time of day offset ptime t2 = t1 - minutes(4)+seconds(2); ptime now = second_clock::local_time(); //use the clock date today = now.date(); //Get the date part out of the time } Well I cannot compile it, compiler does not recognize a type... Well I used many features of Boost libs like serialization and more... I correctly built them and, looking in my /usr/local/lib folder I can see that libboost_date_time.so is there (a good sign which means I was able to build that library) When I compile I write the following: g++ -lboost_date_time main.cpp But the errors it showed me when I specify the lib are the same of those ones where I do not specify any lib. What is this? Anyone knows? The error is main.cpp: In function ‘int main(int, char**)’: main.cpp:9: error: ‘date’ was not declared in this scope main.cpp:9: error: expected ‘;’ before ‘d’ main.cpp:10: error: ‘d’ was not declared in this scope main.cpp:10: error: ‘nanosec’ was not declared in this scope main.cpp:13: error: expected ‘;’ before ‘today’

  Read the article

• Unable to get data from a WCF client

  - by Scott

  I am developing a DLL that will provide sychronized time stamps to multiple applications running on the same machine. The timestamps are altered in a thread that uses a high performance timer and a scalar to provide the appearance of moving faster than real-time. For obvious reasons I want only 1 instance of this time library, and I thought I could use WCF for the other processes to connect to this and poll for timestamps whenever they want. When I connect however I never get a valid time stamp, just an empty DateTime. I should point out that the library does work. The original implementation was a single DLL that each application incorporated and each one was synced using windows messages. I'm fairly sure it has something to do with how I'm setting up the WCF stuff, to which I am still pretty new. Here are the contract definitions: public interface ITimerCallbacks { [OperationContract(IsOneWay = true)] void TimerElapsed(String id); } [ServiceContract(SessionMode = SessionMode.Required, CallbackContract = typeof(ITimerCallbacks))] public interface ISimTime { [OperationContract] DateTime GetTime(); } Here is my class definition: [ServiceBehavior(InstanceContextMode = InstanceContextMode.Single)] public class SimTimeServer: ISimTime The host setup: // set up WCF interprocess comms host = new ServiceHost(typeof(SimTimeServer), new Uri[] { new Uri("net.pipe://localhost") }); host.AddServiceEndpoint(typeof(ISimTime), new NetNamedPipeBinding(), "SimTime"); host.Open(); and the implementation of the interface function server-side: public DateTime GetTime() { if (ThreadMutex.WaitOne(20)) { RetTime = CurrentTime; ThreadMutex.ReleaseMutex(); } return RetTime; } Lastly the client-side implementation: Callbacks myCallbacks = new Callbacks(); DuplexChannelFactory pipeFactory = new DuplexChannelFactory(myCallbacks, new NetNamedPipeBinding(), new EndpointAddress("net.pipe://localhost/SimTime")); ISimTime pipeProxy = pipeFactory.CreateChannel(); while (true) { string str = Console.ReadLine(); if (str.ToLower().Contains("get")) Console.WriteLine(pipeProxy.GetTime().ToString()); else if (str.ToLower().Contains("exit")) break; }

  Read the article

• Why has ESXi 5.0 not used the software RAID configuration on my test server?

  - by kafka

  I've got a test server which was running WS 2008 Enterprise on the bare metal. It was correctly using the software RAID 1 configuration (2x250 GB disks which appeared as one disk), setup on the Dell Poweredge T110 (which meets compatibility requirements) without requiring any extra setup from me. (As an aside I'm fairly sure it's software RAID, as we didn't spec a hardware RAID controller, if that's of any importance in this situation). I am now testing installing ESXi 5.0 on this server to run some VMs. I've successfully installed ESXi, and imported a VM fine, but it's showing 2 x 250 GB disks available as datastores. However they should be appearing as one volume. When I boot the server, there is a RAID configuration screen you can enter, and I'm guessing this is what I'll have to do at some stage, but now need to be very careful because there is one disk which contains data that I want to be mirrored on the other disk. What is the best thing to do in this situation?

  Read the article

• Appropriate Network switch for small server cluster

  - by Chris Dutrow

  Need to build a small business server cluster for the purpose of crunching data. It will not host a web site that needs to be available 24/7. It does need to support servers that host Redis, a Cassandra database cluster, and a Python web server. Operating system will most likely be Centos 6.4 Other servers in the cluster should be able to communicate very fast with each other, especially the Redis server. This will probably require the use of internal IP addresses. We will need to use multi-data center replication to synchronize the Cassandra cluster with the one that we currently have hosted on the cloud Was looking into network switches and we are unsure of the appropriate specifications that we should be looking for. Does the switch need to be "managed" or can it be "unmanged"? Does the switch need to support IPv6 or just IPv4? Do we need an enterprise level Cisco switch, or can we go with something like a $200 DLink managed (or unmanaged) small business switch? Thanks so much!

  Read the article

• Learning libraries without books or tutorials

  - by Kawili-wili

  While many ask questions about where to find good books or tutorials, I'd like to take the opposite tack. I consider myself to be an entry-level programmer ready to move up to mid-level. I have written code in c, c++, c#, perl, python, clojure, vb, and java, so I'm not completely clueless. Where I see a problem in moving to the next level is learning to make better use of the literally hundreds upon hundreds of libraries available out there. I seem paralyzed unless there is a specific example in a book or tutorial to hand-hold me, yet I often read in various forums where another programmer attempts to assist with a question. He/she will look through the docs or scan the available classes/methods in their favorite IDE and seem to grok what's going on in a relatively short period of time, even if they had no previous experience with that specific library or function. I yearn to break the umbilical chord of constantly spending hour upon hour searching and reading, searching and reading, searching and reading. Many times there is no book or tutorial, or if there is, the discussion glosses over my specific needs or the examples shown are too far off the path for the usage I had in mind or the information is outdated and makes use of deprecated components or the library itself has fallen out of mainstream, yet is still perfectly usable (but no docs, books, or tutorials to hand-hold). My question is: In the absence of books or tutorials, what is the best way to grok new or unfamiliar libraries? I yearn to slicken the grok path so I can get down to the business of doing what I love most -- coding.

  Read the article

• How to send Bluetooth audio to non-Bluetooth speakers?

  - by wonsungi

  In short, I am looking for a Bluetooth-3.5 mini stereo converter. What is this type of device called, and what are some of the best models (is there a difference in audio quality/lag)? I wish to connect some speakers (Altec Lansing inMotion IM7), which does not support Bluetooth, to my laptop (Lenovo X301) wirelessly. Currently, I can connect my laptop's headphone jack to the AUX jack on my speakers via a mini stereo cable. How do I replace this cable with some type of Bluetooth setup? I am not sure what this Bluetooth device is called. I thought I found something, but it actually does the opposite of what I need (3.5 mini stereo-Bluetooth). (My OS is Vista Enterprise, if that matters)

  Read the article

• DRAC for remote OS install w/o Virtual Media

  - by The Diamond Z

  I have a few DELL servers in a remote DC and our ISP has been very kind about doing OS installs for us. However, as we move to Production and multiple DC's I'd like to be able to do the installs/re-installs internally and DRAC Enterprise w/SDRAM seems ideal. My question is, how do you get your install ISO's on to the SDRAM? Can I just copy it from a local DVD (temp USB hookup) or FTP? What's the advantage to the SDRAM over just buying a USB dongle (to leave plugged into the server) and installing a bootable install ISO? We're a virtual org generally using DSL (2mb) connections to the DC over the Internet and using 'Virtual Media' isn't viable for us.

  Read the article

• UNC vs. SFTP vs. SSH for uploading to a Windows server

  - by apollodude217

  I understand that UNC, SFTP, and SSH are, of course, different interfaces (protocols?). But feature-wise, how do they differ? Are there things you can do with one that you cannot do with another? Is one more secure than another? The situation I want to fix is one where we have several Windows servers and VPC's, some of which have SFTP servers and some of which don't. For those that don't we use UNC over a VPN shared by the entire enterprise. What I want to do is either use all UNC, all SFTP, or all SSH (unless a real need to vary on a case-by-case basis presents itself). Links would be excellent. My biggest problem here is that my googling brings up irrelevant results. :(

  Read the article

• users connecting to remote desktop to use software

  - by Jordan

  Im an IT assistant at a CNC milling company and we use a program called made2manage. Its an ERP (enterprise resource management) software. Each license is something like 5k and instead of giving each employee there own copy of the software he has everyone that uses the program connect to a server that has a copy of m2m on it. Its slow when there are a bunch of people connected to it. But I guess they dont want to buy more licenses. Is there a better way to do something like this? How bad of a practice is this?

  Read the article

• How is it possible to extend an SWFLoader with MXML?

  - by michael-cereda

  I'm currently doing the following.. Main application: " " In the Component: First Try: ]]> </fx:Script> <fx:Declarations></fx:Declarations> <mx:SWFLoader x="0" y="0" id="loader"/> </s:Group> Second Try: <?xml version="1.0" encoding="utf-8"?> <s:Group xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx"> <fx:Script> <![CDATA[ [Bindable] public var source:String; ]]> </fx:Script> <fx:Declarations> <!-- Place non-visual elements (e.g., services, value objects) here --> </fx:Declarations> <mx:SWFLoader x="0" y="0" source="{source}"/> </s:Group> But the component displays only a "Not Found" icon in both cases. Thanks

  Read the article

• In Outlook 2013, the reading pane does not display images correctly for most emails (but does for some)

  - by smoldyr

  I am running Microsoft Office Outlook 2013 on Windows 7 Enterprise. When I click on an email in the list of messages, the preview of the message in the reading pane usually will not show the images contained in the email, but instead will show a red 'X'. Sometimes this red 'X' is followed by the text "The linked image cannot be displayed. The file may have been moved, renmaed, or deleted. Verify that the link points to the correct file and location." I am using an IMAP email account. The really strange thing is that for some emails, the images will display, although they take a long time to load. How can I make the images show up in the reading pane?

  Read the article

• What version of Windows Server 2008 to Get

  - by dragonmantank

  One of the projects I'm working on is looking like we're going to need to migrate from CentOS 5.4 over to something else (we need to run Postgresql 8.3+, and CentOS/RHEL only support 8.1), and one of the options will be Windows Server. Since 2008 R2 is out that's what I'm looking at. I'll need to run Postgres and Tomcat and don't really require anything that Windows has like IIS (if I can run Server Core, even better!). The other kicker is it will be virtualized through VMWare ESXI 4.0 so that we have three separate boxes: development, Quality, and Production servers. From a licensing standpoint though, and I good enough with just the Web Server edition? Am I right in assuming that will be three licenses? Or should I just jump up to Enterprise so that I get 4 VM licenses?

  Read the article

• What VC++ compiler/linker does when building a C++ project with Managed Extension

  - by ???

  The initial problem is that I tried to rebuild a C++ project with debug symbols and copied it to test machine, The output of the project is external COM server(.exe file). When calling the COM interface function, there's a RPC call failre: COMException(0x800706BE): The remote procedure call failed. According to the COM HRESULT design, if the FACILITY code is 7, it's actually a WIN32 error, and the win32 error code is 0x6BE, which is the above mentioned "remote procedure call failed". All I do is replace the COM server .exe file, the origin file works well. When I checked into the project, I found it's a C++ project with Managed Extension. When I checking the DLL with reflector, it shows there's 2 additional .NET assembly reference. Then I checked the project setting and found nothing about the extra 2 assembly reference. I turned on the show includes option of compiler and verbose library of linker, and try to analyze whether the assembly is indirectly referenced via .h file. I've collect all the .h file and grep all the files with '#using' '#import' and the assembly file itself. There really is a '#using ' in one of the .h file but not-relevant to the referenced assembly. And about the linked .lib library files, only one of the .lib file is a side-product of another managed-extension-enabled C++ project, all others are produced by a pure, traditional C++ project. For the managed-extension-enabled C++ project, I checked the output DLL assembly, it did NOT reference to the 2 assembly. I even try to capture the access of the additional assembly file via sysinternal's filemon and procmon, but the rebuild process does NOT access these file. I'm very confused about the compile and linking process model of a VC++/CLI project, where the additional assembly reference slipped into the final assembly? Thanks in advance for any of your help.

  Read the article

• Center label instance inside VGroup in Flex

  - by Jerry

  Hi all I am trying to center my labels below my image inside my VGroup. The labels are align to left now and it seems like HorizontalAlign is not working on spark component. Anyone knows how to fix it? Thanks a lot. <?xml version="1.0" encoding="utf-8"?> <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"> <fx:Declarations> <!-- Place non-visual elements (e.g., services, value objects) here --> </fx:Declarations> <s:VGroup width="800"> <mx:Image source="images/big/city1.jpg"/> <s:Label text="test1" horizontalCenter="0" /> //doesn't work....:( <s:Label text="test2" /> </s:VGroup> </s:Application>

  Read the article

• How to avoid user keep trying login using Ruby on Rails?

  - by Tattat

  I want to create a login page, it can easy implement using Ruby on Rails. But the login is very simple, but I want more security. I want to stop the user keep trying the password. So, I have some ideas on that. First, stop login feature if the user keep trying the password for 15 mins. After the user login fail 5 times in 15 mins, the system should not allow the user login again in next 15 mins, ever his/her password is correct. Second, I want to add a human verification, after the user tried 5 times. After the user wait for 15 mins to login, I want to add an addition verification to the user. I want the user click the password, and the CAPTCHA image. If one of them is failed, they still can't login the system. He/She have 5 times to try, if he / she failed again, he/she need to want another 15 mins. Third, After the user tried 15 times, and still can't get into the system. I want to lock the user account, the user will receive an email, with a link to assign the password again. So, the question is "Is there any library to implement such authorization easily?" I know it can be implemented using code, but using library is much convenient. Also, I want to ask is there any security suggestion for that? thank u.

  Read the article

• Running System Center Configuration Manager on a Domain Controller

  - by Brent D

  We are a smallish educational network (about 70 clients) with a single server running Windows Server 2008 Enterprise, functioning as both domain controller and file server. The educational pricing for Microsoft Forefront Endpoint Protection 2010 is irresistible as a managed anti-malware solution, but it requires System Center Configuration Manager 2007. I know best practice is not to run System Center Configuration Manager on a domain controller, but it's the only server I have to work with. Will installing SCCM on a domain controller cause problems? What conflicts might I need to take into account when planning deployment?

  Read the article

• Classes with the same name - is it restricted only within the same translation unit?

  - by LeopardSkinPillBoxHat

  Let's just I had the following code: foo.h class Foo { // ... }; foo.cpp #include "foo.h" // Functions for class Foo defined here... Let's say that Foo are built into a static library foo.lib. Now let's say I have the following: foo2.h class Foo { // ... }; foo2.cpp #include "foo2.h" // Functions for class Foo defined here... This is built into a separate static library foo2.lib. Now, if I re-link foo.lib and foo2.lib into an executable program foo.exe, should it be complaining that class Foo has been defined twice? In my experiences, neither the compiler or the linker are complaining. I wouldn't be expecting the compiler to complain, because they have been defined in separate translation units. But why doesn't the linker complain? How does the linker differentiate between the 2 versions of the Foo class? Does it work by decorating the symbols?

  Read the article

• Why is Thunderbird saying I am working offline when Work Offline is not ticked?

  - by Dizzley

  Thunderbird says "You are currently offline. Do you want to go online to get new messages?" The menu item File-Work Offline is not checked. Is there another "offline" setting? Back story: I moved my Thunderbird profile from another user to my new account today following the instructions here. (it's down as I type). This may be a red herring. I have been sending and receiving happily in the last few hours since - so I remain confused. (Windows 7 Enterprise).

  Read the article

• How to pin NetBeans to Windows 7 taskbar?

  - by Vilx-

  I've googled around and it seems that I'm not the only one with the problem, however I couldn't find the solution. Maybe someone around here has figured it out. The problem is that netbeans.exe is actually a stub which is calling javaw.exe. When I try to pin the NetBeans process to the taskbar I actually pin "Java(TM) Platform SE Binary". That changes the icon and the pin doesn't work. The funny thing is that it works on another machine. I don't know whether it's because it's a different version of NetBeans, or a different version of Java. Has anyone figured this out? Added: I know this is sort of not programming related; on the other hand there are plenty of topics around here about how to better your programming environment, and this one is no worse than those. Oh, and btw - Windows 7 Enterprise x64; Java JDK 1.6.17; Netbeans 6.8

  Read the article

< Previous Page | 377 378 379 380 381 382 383 384 385 386 387 388  | Next Page >