Search Results

Search found 9592 results on 384 pages for 'manager'.

Page 381/384 | < Previous Page | 377 378 379 380 381 382 383 384  | Next Page >

  • Slow draw on some apps and dynamic clocks not working properly with ATI/AMD proprietary drivers

    - by Rakeka
    I've recently purchased a new computer (around July 2010) and I've been having some problems with proprietary video drivers on Linux. The hardware is: Video: ATI/AMD Radeon HD 5870 (XFX HD-587X-ZNFC); Motherboard: Asus P7P55D-E Deluxe; Processor: Intel i5 750; Memory: Kingston Hyperx KHX1600C8D3K2/4GX (2x - 8GB Total); Power Supply: XFX P1-750B-CAG9; There are no overclocks, not even the memories (they are at 1333mhz due processor memory controller limitation). The operational system is a homebrew Linux distribution with the following software: Architecture: x86_64 (multilib) Kernel: 2.6.35.10 Xorg: 7.5 Window Manager: wmii-3.9.2 Video Driver: ATI/AMD Catalyst 10.12 There are no desktop effects programs like compiz fusion or beryl. The problems: With ATI/AMD proprietary driver, some applications are with slow draw/redraw, and, the same applications make the driver to increase the card clocks to maximum (0% gpu activity, only the clocks are increased). I dunno exactly how to describe the slow draw but I'll list some applications and symptoms. xterm Flickers a lot when drawing continuous output; When I'm in a workspace with fullscreen xterm, The gpu load stays at 12% in idle, and, with smaller xterm, smaller GPU load. "aticonfig --odgc" output: Default Adapter - ATI Radeon HD 5800 Series Core (MHz) Memory (MHz) Current Clocks : 157 300 Current Peak : 850 1200 Configurable Peak Range : [600-900] [900-1300] GPU load : 12% "aticonfig --pplib-cmd 'get activity'" output: Current Activity is Core Clock: 157MHZ Memory Clock: 300MHZ VDDC: 950 Activity: 12 percent Performance Level: 0 Bus Speed: 5000 Bus Lanes: 16 Maximum Bus Lanes: 16 More examples: mplayer time info flickers on terminal; "find /" flickers a lot (It takes some time to stop with control-c. But, If I change the workspace or put some window upon it, just after the control-c, it stops instantly); "cat somefile" if the file is big (Xorg.0.log for example) it takes some time to display; vim and less (ex: find / | less) don't have much problems, just a little flicker when scrolling; mplayer (no gui) Slow reproduction and seek with -vo x11; Tearing with -vo xv; Time info flickers on terminal (xterm consequence); gvim A little slow draw when scrolling with page up/page down; Firefox Slow draw/redraw on some pages like www.boadica.com.br and sometimes on www.youtube.com with flash enable (never noticed on many pages); Corruptions when informative yellow boxes are showing and scroll the page (an gray box appears at the same place of the informative box); "Wallpaper" After minimizing a fullscreen window or changing to an empty workspace it takes some time to redraw wallpaper. "Video Card" The core and memory clocks are increased with the events described above and on other situations like change workspace (even without wallpaper), minimize, maximize or move a window; Idle clocks: Core: 157mhz, Memory: 300mhz Full clocks: Core: 850mhz, Memory: 1200mhz xpdf Painful slow scrolling; display (from ImageMagick) Slow menus and sometimes slow image redraw; Programs that I use and are apparently without problems: gimp; pidgin; mplayer (-vo gl, gl2); blender; unigine heaven (better fps than on Windows); doom3; tibia; penumbra overture; amnesia the dark descent (wine); diablo 2 (wine); No problems on Windows (Windows 7 Ultimate 64bit). And special note to this: Full desktop effects from Debian and Ubuntu gnome appearance cpanel don't cause ANY problems, even the core and memory clocks don't increase when change workspace, minimize, maximize or move a window. What I've tested: Unsuccessful tests: Tested all drivers versions since 10.6 (released approximately when I've installed the first slackware in this PC); Tested other video card - ATI/AMD Radeon HD 5570 (XFX HD-557X-ZHF2); Tested some options on xorg.conf and that I've found googling (some of these options are commented on my xorg.conf. I'll send the links at the end of post); Tested some patches like 107_fedora_dont_fill_bg_none.patch and xserver-xorg-backclear.patch from Arch Linux Catalyst page (https://wiki.archlinux.org/index.php/ATI_Catalyst); Tested other distros and software versions: Tested XORG-7.6 on my own distribution; Tested Debian Squeeze (testing - from 2010-12-20); Tested Ubuntu Marverick (10.10); Tested Slackware 13.1; Distros info: Architecture: i386 Debian and Ubuntu with all default software (kernel, gnome, xorg, drivers); Slackware with Catalyst from AMD page and default window managers like: fvwm, xfce, and my own build of wmii; Successful tests: Tested other video card (only on my homebrew distro) - NVIDIA Geforce 7300GS with driver 260.19.29; That didn't shown the slow draw problems, but that card is a bit obsolete, so, dunno if that lacks features like the dynamic clocks. I don't dispose of other video cards like nvidia g/gt/gts/gtx 200~400~500 or Radeon HD 3000/4000/6000 to make more tests. Tested other hardware: Video: ATI/AMD Radeon HD 5570 (XFX HD-557X-ZHF2); Motherboard: Intel DG31PR; Processor: Core 2 Duo E6750; Software for that hardware: Fresh install of same distros (except for the mine) with same program versions; That video card (HD 5570) were full time at the maximum clocks (something like 500/750, don't remember) in all the operational systems (Windows XP and Windows 7 too), but it didn't shown the same problems that I have here. I've googled a lot about common problems with ATI/AMD proprietary drivers for Linux and didn't find similar problems, except by the Firefox corruptions, that the solutions were to disable ATI Direct2DAccel and use XAA. With XAA the problems persists and the other applications like pidgin and rest of Firefox showed the same problems of slow draw/redraw. Open source Drivers: With open source drivers (xf86-video-ati-6.13.2) I hadn't the same slow draw problems, but, had other problems, that, for now, make it no viable solution. I'll not discuss it here because this is another line of problems and will confuse everything. If it happens to be the only solution, I'll make another thread to discuss it. Logs and Configs: kernel .config dmesg xorg package list xorg.conf Xorg.0.log

    Read the article

  • How can I resolve this one application coming up with an "You don't have permission to use the application" error?

    - by morgant
    I've got a Mac OS X 10.6 Snow Leopard Server Open Directory Master with a user who's getting Mobility & Application managed preferences from a group (the only group they're a member of). The workstation is also running Mac OS X 10.6 Snow Leopard, when the user logs in and tries to run our primary application which they're explicitly allowed to run (via the group's preferences), it says "You don't have permission to use the application 'Blah'". Now, the application is added to the group's list of always allowed applications, unsigned (so a minor difference in application version or file contents shouldn't disallow it). It even lives in a subdirectory of /Applications which is in the list of folders to allow applications. I've run into this when logging this user into new workstations and the following usually works: Log them out Remove the following files from their mobile home folder on the workstation: /Library/Managed\ Preferences/, ~/.FileSync, ~/Library/Preferences/com.apple.finder.plist, and ~/Library/Preferences/com.apple.MCX.plist. Remove the following files from their network home folder on the server: ~/.FileSync, ~/Library/Preferences/com.apple.finder.plist, and ~/Library/Preferences/com.apple.MCX.plist. Log them back in on the workstation. However, this no longer resolves the issue. Their Home Sync preferences are set (on the group) to sync ~, but not the following files (manually, at login, and at logout... no background sync here): ~/.SymAVQSFile ~/NAVMac800QSFile ~/Library ~/.FileSync ~/.account Their Preferences Sync preferences are set (also on the group) to sync ~/Library & ~/Documents/Microsoft User Data, but not the following files (also manually, at login, and at logout... no background sync): ~/.SymAVQSFile ~/.Trash ~/.Trashes ~/Documents/Microsoft User Data/Entourage Temp ~/Library/Application Support/SyncServices ~/Library/Application Support/MobileSync ~/Library/Caches ~/Library/Calendars/Calendar Cache ~/Library/Logs ~/Library/Mail/AvailableFeeds ~/Library/Mail/Envelope Index ~/Library/Preferences/Macromedia/ ~/Library/Printers ~/Library/PubSub/Database ~/Library/PubSub/Downloads ~/Library/PubSub/Feeds ~/Library/Safari/Icons.db ~/Library/Safari/HistoryIndex.sk ~/Library/iTunes/iPhone Software Updates IMAP-* Exchange-* EWS-* Mac-* ~/Library/Preferences/ByHost ~/Library/Preferences/com.apple.dock.plist ~/Library/Preferences/com.apple.sitebarlists.plist ~/Library/Application Support/4D ~/Library/Preferences/com.apple.MCX.plist ~/.FileSync ~/.account Even with ~/Library/Preferences/com.apple.MCX.plist prevented from syncing during a Preferences Sync, it still seems to show up in the network home on the server frequently. Are there any other files other than ~/Library/Preferences/com.apple.MCX.plist that contain application Managed Preferences that might be causing this one app to be showing up as not allowed? Any ideas on how ~/Library/Preferences/com.apple.MCX.plist keeps getting sync'd back up the network home folder on the server? Update: I thought I had found a workaround this morning, but it also seemed to be extremely temporary. Basically, loking at /Library/Managed\ Preferences/[shortname]/com.apple.applicationaccess.new.plist I discovered that it didn't have an entry for the application in question, but /Library/Managed\ Preferences/[shortname]/complete.plist did. Naturally, I deleted com.apple.applicationaccess.new.plist, logged in again, and it worked... on one workstation. It failed on others, and after logging out & back in a couple more times it started failing on all of them again, even after further deletions of com.apple.applicationaccess.new.plist. Oddly, com.apple.applicationaccess.new.plist & complete.plist do both contain an entry for the application in question now, but it still says it's not allowed. Further Update: Okay, so I now have a reproducible workaround which seems to be required after every reboot of the workstation: Log in as the user (you'll discover you cannot launch the application in question). Fast User Switch to the local admin account on the workstation (we always have one on every machine). From that local admin account, run sudo mcxrefresh -n 'shortname' (logging out and back in as the user in question will not work). Fast User Switch back to the user (you'll still not be allowed to run the application). Log the user out and back in (you'll now be able to run the application in question.) Fast User Switch back to the local admin account, log it out, and log back in as the user in question. If you do all that exactly as described it'll keep working through log out & log back in, but NOT through a reboot. If, after a reboot, you try something like logging in as the local admin account, running sudo mcxrefresh -n 'shortname', logging out, then logging in as the user in question, it will NOT work. Yet Another Update We don't have any computer groups in our Open Directory, so it shouldn't be getting any conflicting settings from there. I ran sudo mcxquery -format xml -user shortname -group groupname before & after performing the aforementioned process to allow the application in question to be run and the results were identical (saved the result to files & diff'd... I'm not just guessing here). One Step Forward, Half a Step Back: When the Mac OS X 10.6.5 Server update was released, we upgraded our Open Directory Master to it as the changes included the following managed preferences fixes which I hoped might address this issue: Addresses an issue that could prevent managed preferences from being applied when a user logs in on a workstation that has been idle. Fixes an issue that could prevent administrators from bypassing client management settings on a workstation. This seemed to improve the situation slightly. The application in question now usually launches without error. If, and when it does launch with the "You don't have permission to use the application" error, logging the user out and back in seems to correct it. That said, we've since had to add a couple of applications to the user's ~/Applications/ directory and those are still prevented from launching. The workstations are running Mac OS X 10.6.4, the OD Master (which the workstations are bound to) is running Mac OS 10.6.5 Server (although there are two OD Replicas still running 10.6.4 Server), and we're using Workgroup Manager 10.6.3 (which is included with the Server Admin Tools 10.6.5 upgrade) to add the applications (unsigned, as always). This time, I've caught the following in /var/log/system.log when attempting to launch one of the allowed applications from ~/Applications: Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker checkApp:csFlags:] [954:username] -- *** Incoming app appears to be masquerading as white listed app and failed signature validation: /Users/username/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro. Note: This may be a valid app of a different version than what was whitelisted (on a different volume?) Dec 22 17:36:24 hostname [0x0-0xa42a42].com.filemaker.filemakerpro[43304]: launch of /Users/username/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro was blocked Dec 22 17:36:24 hostname com.apple.launchd.peruser.1340[6375] ([0x0-0xa42a42].com.filemaker.filemakerpro[43304]): Exited with exit code: 255 Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker(Private) _removeAppFromWhiteList:] [1362:username] -- *** Couldn't find local user record Running sudo mcxquery -format xml -user username -group groupname includes the following entry for FileMaker Pro 5.5 (and appears to include a full integration of the user's application whitelist & group's application whitelist): <dict> <key>bundleID</key> <string>com.filemaker.filemakerpro</string> <key>displayName</key> <string>FileMaker Pro</string> </dict> Note the lack of <key>appID</key><data> ... </data> which seems to specify a signed application. While whitelisted directories also appear to be correctly listed in the results, they too do not actually allow the applications to be run either. What is going on here?! Where else should I be looking?

    Read the article

  • Spritebatch drawing sprite with jagged borders

    - by Mutoh
    Alright, I've been on the making of a sprite class and a sprite sheet manager, but have come across this problem. Pretty much, the project is acting like so; for example: Let's take this .png image, with a transparent background. Note how it has alpha-transparent pixels around it in the lineart. Now, in the latter link's image, in the left (with CornflowerBlue background) it is shown the image drawn in another project (let's call it "Project1") with a simpler sprite class - there, it works. The right (with Purple background for differentiating) shows it drawn with a different class in "Project2" - where the problem manifests itself. This is the Sprite class of Project1: using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.Graphics; namespace WindowsGame2 { class Sprite { Vector2 pos = new Vector2(0, 0); Texture2D image; Rectangle size; float scale = 1.0f; // --- public float X { get { return pos.X; } set { pos.X = value; } } public float Y { get { return pos.Y; } set { pos.Y = value; } } public float Width { get { return size.Width; } } public float Height { get { return size.Height; } } public float Scale { get { return scale; } set { if (value < 0) value = 0; scale = value; if (image != null) { size.Width = (int)(image.Width * scale); size.Height = (int)(image.Height * scale); } } } // --- public void Load(ContentManager Man, string filename) { image = Man.Load<Texture2D>(filename); size = new Rectangle( 0, 0, (int)(image.Width * scale), (int)(image.Height * scale) ); } public void Become(Texture2D frame) { image = frame; size = new Rectangle( 0, 0, (int)(image.Width * scale), (int)(image.Height * scale) ); } public void Draw(SpriteBatch Desenhista) { // Desenhista.Draw(image, pos, Color.White); Desenhista.Draw( image, pos, new Rectangle( 0, 0, image.Width, image.Height ), Color.White, 0.0f, Vector2.Zero, scale, SpriteEffects.None, 0 ); } } } And this is the code in Project2, a rewritten, pretty much, version of the previous class. In this one I added sprite sheet managing and, in particular, removed Load and Become, to allow for static resources and only actual Sprites to be instantiated. using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.Graphics; namespace Mobby_s_Adventure { // Actually, I might desconsider this, and instead use static AnimationLocation[] and instanciated ID and Frame; // For determining the starting frame of an animation in a sheet and being able to iterate through // the Rectangles vector of the Sheet; class AnimationLocation { public int Location; public int FrameCount; // --- public AnimationLocation(int StartingRow, int StartingColumn, int SheetWidth, int NumberOfFrames) { Location = (StartingRow * SheetWidth) + StartingColumn; FrameCount = NumberOfFrames; } public AnimationLocation(int PositionInSheet, int NumberOfFrames) { Location = PositionInSheet; FrameCount = NumberOfFrames; } public static int CalculatePosition(int StartingRow, int StartingColumn, SheetManager Sheet) { return ((StartingRow * Sheet.Width) + StartingColumn); } } class Sprite { // The general stuff; protected SheetManager Sheet; protected Vector2 Position; public Vector2 Axis; protected Color _Tint; public float Angle; public float Scale; protected SpriteEffects _Effect; // --- // protected AnimationManager Animation; // For managing the animations; protected AnimationLocation[] Animation; public int AnimationID; protected int Frame; // --- // Properties for easy accessing of the position of the sprite; public float X { get { return Position.X; } set { Position.X = Axis.X + value; } } public float Y { get { return Position.Y; } set { Position.Y = Axis.Y + value; } } // --- // Properties for knowing the size of the sprite's frames public float Width { get { return Sheet.FrameWidth * Scale; } } public float Height { get { return Sheet.FrameHeight * Scale; } } // --- // Properties for more stuff; public Color Tint { set { _Tint = value; } } public SpriteEffects Effect { set { _Effect = value; } } public int FrameID { get { return Frame; } set { if (value >= (Animation[AnimationID].FrameCount)) value = 0; Frame = value; } } // --- // The only things that will be constantly modified will be AnimationID and FrameID, anything else only // occasionally; public Sprite(SheetManager SpriteSheet, AnimationLocation[] Animations, Vector2 Location, Nullable<Vector2> Origin = null) { // Assign the sprite's sprite sheet; // (Passed by reference! To allow STATIC sheets!) Sheet = SpriteSheet; // Define the animations that the sprite has available; // (Passed by reference! To allow STATIC animation boundaries!) Animation = Animations; // Defaulting some numerical values; Angle = 0.0f; Scale = 1.0f; _Tint = Color.White; _Effect = SpriteEffects.None; // If the user wants a default Axis, it is set in the middle of the frame; if (Origin != null) Axis = Origin.Value; else Axis = new Vector2( Sheet.FrameWidth / 2, Sheet.FrameHeight / 2 ); // Now that we have the axis, we can set the position with no worries; X = Location.X; Y = Location.Y; } // Simply put, draw the sprite with all its characteristics; public void Draw(SpriteBatch Drafter) { Drafter.Draw( Sheet.Texture, Position, Sheet.Rectangles[Animation[AnimationID].Location + FrameID], // Find the rectangle which frames the wanted image; _Tint, Angle, Axis, Scale, _Effect, 0.0f ); } } } And, in any case, this is the SheetManager class found in the previous code: using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.Graphics; namespace Mobby_s_Adventure { class SheetManager { protected Texture2D SpriteSheet; // For storing the sprite sheet; // Number of rows and frames in each row in the SpriteSheet; protected int NumberOfRows; protected int NumberOfColumns; // Size of a single frame; protected int _FrameWidth; protected int _FrameHeight; public Rectangle[] Rectangles; // For storing each frame; // --- public int Width { get { return NumberOfColumns; } } public int Height { get { return NumberOfRows; } } // --- public int FrameWidth { get { return _FrameWidth; } } public int FrameHeight { get { return _FrameHeight; } } // --- public Texture2D Texture { get { return SpriteSheet; } } // --- public SheetManager (Texture2D Texture, int Rows, int FramesInEachRow) { // Normal assigning SpriteSheet = Texture; NumberOfRows = Rows; NumberOfColumns = FramesInEachRow; _FrameHeight = Texture.Height / NumberOfRows; _FrameWidth = Texture.Width / NumberOfColumns; // Framing everything Rectangles = new Rectangle[NumberOfRows * NumberOfColumns]; int ID = 0; for (int i = 0; i < NumberOfRows; i++) { for (int j = 0; j < NumberOfColumns; j++) { Rectangles[ID] = new Rectangle ( _FrameWidth * j, _FrameHeight * i, _FrameWidth, _FrameHeight ); ID++; } } } public SheetManager (Texture2D Texture, int NumberOfFrames): this(Texture, 1, NumberOfFrames) { } } } For even more comprehending, if needed, here is how the main code looks like (it's just messing with the class' capacities, nothing actually; the result is a disembodied feet walking in place animation on the top-left of the screen and a static axe nearby): using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; using System.Threading; namespace Mobby_s_Adventure { /// <summary> /// This is the main type for your game /// </summary> public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; static List<Sprite> ToDraw; static Texture2D AxeSheet; static Texture2D FeetSheet; static SheetManager Axe; static Sprite Jojora; static AnimationLocation[] Hack = new AnimationLocation[1]; static SheetManager Feet; static Sprite Mutoh; static AnimationLocation[] FeetAnimations = new AnimationLocation[2]; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; this.TargetElapsedTime = TimeSpan.FromMilliseconds(100); this.IsFixedTimeStep = true; } /// <summary> /// Allows the game to perform any initialization it needs to before starting to run. /// This is where it can query for any required services and load any non-graphic /// related content. Calling base.Initialize will enumerate through any components /// and initialize them as well. /// </summary> protected override void Initialize() { // TODO: Add your initialization logic here base.Initialize(); } /// <summary> /// LoadContent will be called once per game and is the place to load /// all of your content. /// </summary> protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. spriteBatch = new SpriteBatch(GraphicsDevice); // Loading logic ToDraw = new List<Sprite>(); AxeSheet = Content.Load<Texture2D>("Sheet"); FeetSheet = Content.Load<Texture2D>("Feet Sheet"); Axe = new SheetManager(AxeSheet, 1); Hack[0] = new AnimationLocation(0, 1); Jojora = new Sprite(Axe, Hack, new Vector2(100, 100), new Vector2(5, 55)); Jojora.AnimationID = 0; Jojora.FrameID = 0; Feet = new SheetManager(FeetSheet, 8); FeetAnimations[0] = new AnimationLocation(1, 7); FeetAnimations[1] = new AnimationLocation(0, 1); Mutoh = new Sprite(Feet, FeetAnimations, new Vector2(0, 0)); Mutoh.AnimationID = 0; Mutoh.FrameID = 0; } /// <summary> /// UnloadContent will be called once per game and is the place to unload /// all content. /// </summary> protected override void UnloadContent() { // TODO: Unload any non ContentManager content here } /// <summary> /// Allows the game to run logic such as updating the world, /// checking for collisions, gathering input, and playing audio. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); // Update logic Mutoh.FrameID++; ToDraw.Add(Mutoh); ToDraw.Add(Jojora); base.Update(gameTime); } /// <summary> /// This is called when the game should draw itself. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.Purple); // Drawing logic spriteBatch.Begin(); foreach (Sprite Element in ToDraw) { Element.Draw(spriteBatch); } spriteBatch.Draw(Content.Load<Texture2D>("Sheet"), new Rectangle(50, 50, 55, 60), Color.White); spriteBatch.End(); base.Draw(gameTime); } } } Please help me find out what I'm overlooking! One thing that I have noticed and could aid is that, if inserted the equivalent of this code spriteBatch.Draw( Content.Load<Texture2D>("Image Location"), new Rectangle(X, Y, images width, height), Color.White ); in Project2's Draw(GameTime) of the main loop, it works. EDIT Ok, even if the matter remains unsolved, I have made some more progress! As you see, I managed to get the two kinds of rendering in the same project (the aforementioned Project2, with the more complex Sprite class). This was achieved by adding the following code to Draw(GameTime): protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.Purple); // Drawing logic spriteBatch.Begin(); foreach (Sprite Element in ToDraw) { Element.Draw(spriteBatch); } // Starting here spriteBatch.Draw( Axe.Texture, new Vector2(65, 100), new Rectangle ( 0, 0, Axe.FrameWidth, Axe.FrameHeight ), Color.White, 0.0f, new Vector2(0, 0), 1.0f, SpriteEffects.None, 0.0f ); // Ending here spriteBatch.End(); base.Draw(gameTime); } (Supposing that Axe is the SheetManager containing the texture, sorry if the "jargons" of my code confuse you :s) Thus, I have noticed that the problem is within the Sprite class. But I only get more clueless, because even after modifying its Draw function to this: public void Draw(SpriteBatch Drafter) { /*Drafter.Draw( Sheet.Texture, Position, Sheet.Rectangles[Animation[AnimationID].Location + FrameID], // Find the rectangle which frames the wanted image; _Tint, Angle, Axis, Scale, _Effect, 0.0f );*/ Drafter.Draw( Sheet.Texture, Position, new Rectangle( 0, 0, Sheet.FrameWidth, Sheet.FrameHeight ), Color.White, 0.0f, Vector2.Zero, Scale, SpriteEffects.None, 0 ); } to make it as simple as the patch of code that works, it still draws the sprite jaggedly!

    Read the article

  • CodePlex Daily Summary for Thursday, September 20, 2012

    CodePlex Daily Summary for Thursday, September 20, 2012Popular ReleasesSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.1.2020.421): New features: Disable a specific part of SiteMap to keep the data without displaying them in the CRM application. It simply comments XML part of the sitemap (thanks to rboyers for this feature request) Right click an item and click on "Disable" to disable it Items disabled are greyed and a suffix "- disabled" is added Right click an item and click on "Enable" to enable it Refresh list of web resources in the web resources pickerWPF Animated GIF: WPF Animated GIF 1.2.1: Bug fixes 1275: fixed rendering issues when DisposalMethod = 2 or 3AJAX Control Toolkit: September 2012 Release: AJAX Control Toolkit Release Notes - September 2012 Release Version 60919September 2012 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ...Lib.Web.Mvc & Yet another developer blog: Lib.Web.Mvc 6.1.0: Lib.Web.Mvc is a library which contains some helper classes for ASP.NET MVC such as strongly typed jqGrid helper, XSL transformation HtmlHelper/ActionResult, FileResult with range request support, custom attributes and more. Release contains: Lib.Web.Mvc.dll with xml documentation file Standalone documentation in chm file and change log Library source code Sample application for strongly typed jqGrid helper is available here. Sample application for XSL transformation HtmlHelper/ActionRe...Sense/Net CMS - Enterprise Content Management: SenseNet 6.1.2 Community Edition: Sense/Net 6.1.2 Community EditionMain new featuresOur current release brings a lot of bugfixes, including the resolution of js/css editing cache issues, xlsx file handling from Office, expense claim demo workspace fixes and much more. Besides fixes 6.1.2 introduces workflow start options and other minor features like a reusable Reject client button for approval scenarios and resource editor enhancements. We have also fixed an issue with our install package to bring you a flawless installation...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...Python Tools for Visual Studio: 1.5 RC: PTVS 1.5RC Available! We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RC. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. The primary new feature for the 1.5 release is Django including Azure support! The http://www.djangoproject.com is a pop...Launchbar: Lanchbar 4.0.0: First public release.AssaultCube Reloaded: 2.5.4 -: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: New logo Improved airstrike! Reset nukes...Extended WPF Toolkit: Extended WPF Toolkit - 1.7.0: Want an easier way to install the Extended WPF Toolkit?The Extended WPF Toolkit is available on Nuget. What's new in the 1.7.0 Release?New controls Zoombox Pie New features / bug fixes PropertyGrid.ShowTitle property added to allow showing/hiding the PropertyGrid title. Modifications to the PropertyGrid.EditorDefinitions collection will now automatically be applied to the PropertyGrid. Modifications to the PropertyGrid.PropertyDefinitions collection will now be reflected automaticaly...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2 For detailed release notes check the release notes. JayData core: all async operations now support promises JayDa...????????API for .Net SDK: SDK for .Net ??? Release 4: 2012?9?17??? ?????,???????????????。 ?????Release 3??????,???????,???,??? ??????????????????SDK,????????。 ??,??????? That's all.VidCoder: 1.4.0 Beta: First Beta release! Catches up to HandBrake nightlies with SVN 4937. Added PGS (Blu-ray) subtitle support. Additional framerates available: 30, 50, 59.94, 60 Additional sample rates available: 8, 11.025, 12 and 16 kHz Additional higher bitrates available for audio. Same as Source Constant Framerate available. Added Apple TV 3 preset. Added new Bob deinterlacing option. Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will keep running and continue pro...DNN Metro7 style Skin package: Metro7 style Skin for DotNetNuke 06.02.01: Stabilization release fixed this issues: Links not worked on FF, Chrome and Safari Modified packaging with own manifest file for install and source package. Moved the user Image on the Login to the left side. Moved h2 font-size to 24px. Note : This release Comes w/o source package about we still work an a solution. Who Needs the Visual Studio source files please go to source and download it from there. Known 16 CSS issues that related to the skin.css. All others are DNN default o...Visual Studio Icon Patcher: Version 1.5.1: This fixes a bug in the 1.5 release where it would crash when no language packs were installed for VS2010.VFPX: Desktop Alerts 1.0.2: This update for the Desktop Alerts contains changes to behavior for setting custom sounds for alerts. I have removed ALERTWAV.TXT from the project, and also removed DA_DEFAULTSOUND from the VFPALERT.H file. The AlertManager class and Alert class both have a "default" cSound of ADDBS(JUSTPATH(_VFP.ServerName))+"alert.wav" --- so, as long as you distribute a sound file with the file name "alert.wav" along with the EXE, that file will be used. You can set your own sound file globally by setti...MCEBuddy 2.x: MCEBuddy 2.2.15: Changelog for 2.2.15 (32bit and 64bit) 1. Added support for %originalfilepath% to get the source file full path. Used for custom commands only. 2. Added support for better parsing of Media Portal XML files to extract ShowName and Episode Name and download additional details from TVDB (like Season No, Episode No etc). 3. Added support for TVDB seriesID in metadata 4. Added support for eMail non blocking UI testEmmaClient - Liveresults for Orienteering: EmmaClient 2012-09-13: Minor release with a small fix for producing OS2012 results (and status of runners in the forest)Multiple Image choice custom field type: MultipleImageUpload V1.0: This is the Custom field type which allows the users to choose image as a choice field. This custom field type is SharePoint 2010, install the WSP thru powershell or Stsadm tool and enjoy the functionality...MDS Administration: Version 1.1.3: Fixed Rename issueNew Projects3dxia: bug3dxiaBitbucket Issue Tracker: A simple issue-tracking Windows client for your projects hosted on bitbucket.org.C++ thread-safe logging: Visual Studio C++ log library project: add to your project for thread-safe logging capabilities.Caddies GeoNote: The work started from making a vision for a neighbourhood communication platform, and ended up in creating the version 1.0 of a mobile application – GeoNotes – CodePlexGitHookForAzure: TestCommerce Server Pipeline Log Analyzer: This tool read and analyze pipeline logs under one selected folder. It applies to Microsoft Commerce Server 2002, 2007, 2009 and 2009 R2 Pipeline logs.Contrib.Mod.ResetPassword: Send reset link as a shapeContrib.Taxonomies.ViewExtension: Orchard module that adds a filter box to the taxonomies selector.EasierRdp: This is a remote desktop session management tool which provides an easy way to maintain multiple users and servers' connectionEconomic news grabber: WCF service for get news from rss, news sites and etc. WPF client for presentation this data for end users.Eticaret Sitesi: eee ticFacebook Graph API SDK Helper Class Library: Facebook C# Graph API SDK Helper Class Under developmentfxch01v14: helloKarned 2: Karned est un carnet de pêche informatique. Ce logiciel permet de noter vos prises de pêche à des fins d'analyse, ou simplement pour le souvenir...lixotrash: SandBox and POCs collections, not interesting hereLoggerLib: The project is a "Tracing Library" developed in a Borland C++ enviroment. Il progetto consiste in una libreria di tracciamento, sviluppata in ambiente Borland.LyncTalker: A simple tray application which will speak incoming Lync instant messages.MicroFrameWork: MicroFrameWorkNuzzle: 2.6.5 Dofus EmulatorPDF Merge: PDF Merge is a simple user-friendly application that allows you to merge multiple PDF documents including scanned / imported documents and images into 1 PDF.Pipeline: A library of several lightweight pipeline implementations ("pipes and filters" pattern).Prime Calculator: PrimeCalculator factorizes a number or a math expression into its prime factors or if prime display its prime type [Unit, Prime, Additive, Pure].Racing: not ready yetRuntime DataSet/DataTable viewer: This component basically allows you to inspect the contents of any Data Set or a Data Table at runtime without breaking into the debugger again and again.Service billing: Student group work for the College of West Anglia UCWA. Snake!: A Snake game written in C#SoccerBot: this is just a test projectSQL Server Trace File Import Utility: Command-line utility to import trace files into a data warehouse type structure. Currently it only handles Login events.testscenairo7onv14: helloToQueryString: Serialize any object in C# to a query string with the .ToQueryString() extension method. Supports primitives, strings, arrays and collections.tyajz: tyajz projectWindows Azure Table Storage: you can find all the details in my blog: hhaggan.wordpress.com and if you do have any question or inquiries feel free to contact me at hhaggan@hotmail.comwtcms: wtcms

    Read the article

  • CodePlex Daily Summary for Thursday, November 01, 2012

    CodePlex Daily Summary for Thursday, November 01, 2012Popular ReleasesAccess 2010 Application Platform - Build Your Own Database: Application Platform - 0.0.1: Initial Release This is the first version of the database. At the moment is all contained in one file to make development easier, but the obvious idea would be to split it into Front and Back End for a production version of the tool. The features it contains at the moment are the "Core" features.Python Tools for Visual Studio: Python Tools for Visual Studio 1.5: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. For a quick overview of the general IDE experience, please watch this video There are a number of exciting improvement in this release comp...Devpad: 4.25: Whats new for Devpad 4.25: New Theme support New Export Wordpress Minor Bug Fix's, improvements and speed upsAssaultCube Reloaded: 2.5.5: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: Fixed potential bot bugs: Map change, OpenAL...Edi: Edi 1.0 with DarkExpression: Added DarkExpression theme (dialogs and message boxes are not completely themed, yet)MCEBuddy 2.x: MCEBuddy 2.3.6: Changelog for 2.3.6 (32bit and 64bit) 1. Fixed a bug in multichannel audio conversion failure. AAC does not support 6 channel audio, MCEBuddy now checks for it and force the output to 2 channel if AAC codec is specified 2. Fixed a bug in Original Broadcast Date and Time. Original Broadcast Date and Time is reported in UTC timezone in WTV metadata. TVDB and MovieDB dates are reported in network timezone. It is assumed the video is recorded and converted on the same machine, i.e. local timezone...MVVM Light Toolkit: MVVM Light Toolkit V4.1 for Visual Studio 2012: This version only supports Visual Studio 2012 (and all Express editions too). If you use Visual Studio 2010, please stay tuned, we will publish an update in a few days with support for VS10. V4.1 supports: Windows Phone 8 Windows 8 (Windows RT) Silverlight 5 Silverlight 4 WPF 4.5 WPF 4 WPF 3.5 And the following development environments: Visual Studio 2012 (Pro, Premium, Ultimate) Visual Studio 2012 Express for Windows 8 Visual Studio 2012 Express for Windows Phone 8 Visual...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.73: Fix issue in Discussion #401101 (unreferenced var in a for-in statement was getting removed). add the grouping operator to the parsed output so that unminified parsed code is closer to the original. Will still strip unneeded parens later, if minifying. more cleaning of references as they are minified out of the code.Liberty: v3.4.0.1 Release 28th October 2012: Change Log -Fixed -H4 Fixed the save verification screen showing incorrect mission and difficulty information for some saves -H4 Hopefully fixed the issue where progress did not save between missions and saves would not revert correctly -H3 Fixed crashes that occurred when trying to load player information -Proper exception dialogs will now show in place of crashesPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 7): This release is compatible with the version of the Smooth Streaming SDK released today (10/26). Release 1 of the player framework is expected to be available next week. IMPROVEMENTS & FIXESIMPORTANT: List of breaking changes from preview 6 Support for the latest smooth streaming SDK. Xaml only: Support for moving any of the UI elements outside the MediaPlayer (e.g. into the appbar). Note: Equivelent changes to the JS version due in coming week. Support for localizing all text used in t...Send multiple SMS via Way2SMS C#: SMS 1.1: Added support for 160by2Quick Launch: Quick Launch 1.0: A Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsPress Win+Q and start to search and run. http://www.codeplex.com/Download?ProjectName=quicklaunch&DownloadId=523536Orchard Project: Orchard 1.6: Please read our release notes for Orchard 1.6: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Media Companion: Media Companion 3.507b: Once again, it has been some time since our release, and there have been a number changes since then. It is hoped that these changes will address some of the issues users have been experiencing, and of course, work continues! New Features: Added support for adding Home Movies. Option to sort Movies by votes. Added 'selectedBrowser' preference used when opening links in an external browser. Added option to fallback to getting runtime from the movie file if not available on IMDB. Added new Big...MSBuild Extension Pack: October 2012: Release Blog Post The MSBuild Extension Pack October 2012 release provides a collection of over 475 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...NAudio: NAudio 1.6: Release notes at http://mark-dot-net.blogspot.co.uk/2012/10/naudio-16-release-notes-10th.htmlPowerShell Community Extensions: 2.1 Production: PowerShell Community Extensions 2.1 Release NotesOct 25, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. See the ReleaseNotes.txt download above for more information.Umbraco CMS: Umbraco 4.9.1: Umbraco 4.9.1 is a bugfix release to fix major issues in 4.9.0 BugfixesThe full list of fixes can be found in the issue tracker's filtered results. A summary: Split buttons work again, you can now also scroll easier when the list is too long for the screen Media and Content pickers have information of the full path of the picked item Fixed: Publish status may not be accurate on nodes with large doctypes Fixed: 2 media folders and recycle bins after upgrade to 4.9 The template/code ...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...Rawr: Rawr 5.0.2: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...New ProjectsAsbesto: Proyecto grupo: "2ravas" para Laboratorio de Computación IV de la carrera TSP de la UTN-FRGP Realizado en C# y ASP.NET en Visual Studio 2012 y SQL Server 2012C++ Diamond printer on console without if statement: prints just a diamond with stars(*). only one important and funny feature is that it's not using 'if' statement. C++ used.CloudTest: Test cloud computing projectEnumeration of objects Class Library C#: At core level in Java I like extension of traditional enum type permiting use as the elements instances of a class. The project implements the same idea by C# with some more advanced features like a set type with boolean operators extending idea of FlagsAttributeEquation Inversion: Visual Studion 2008 Add-in for equation inversions.ESENT Serialization Class Library: ESENT Serialization class library is built above Managed ESENT. It allows you to store your objects in the underlying extensible storage engine database.ForceHttps: Very simple httpModule to ensure that all http requests are https. 1. Drop the dll into your website's bin directory 2. Update httpModules section of your web.config to reference the dll 3. Make sure your Web Server can handle SSL requests for the URL ALL http requests will be redirected as https.forrajeriaPAV2: tp pav2 asd as asd as fasfjaijiasjifoa as asf asf as afs fas asf afs fsaGoogle Analytics for WinRT: A Windows Store (WinRT) class library for tracking Google Analytics page views, events, and custom variables for your Metro style desktop and tablet apps.huanglitest10312: mvc projectiMan: iMan will be your own port manager, which help to provide the information about all the ports open in your PC It's completely developed in .NET C#InjectionCop: Facilitates secure coding through static code analysis and contract annotations in the Common Language Infrastructure.Master of Olympus: Remake of Master of Olympus : Zeus, a game developed by Impressions Games in 2000.MediaScribe: MediaScribe is a note app for your media.MouseNestDotNet: A small personal website application.Project Estimator ???????? ?? ?????????????? ?? ???????: Project Estimator ? ???????? ??????????? ? ??????????? ?? ????? ? ???????? ????.Projekt grupowy 1: Project created only for school purpose.SecondHandApp: Warenwirtschaftsprogramm für denn SecondHand LädenSimple .NET XML Serialization: .NET's XML serialization using Linq XObject classes EG: XElement in an IXmlSerializable base classStrip Converter: A Very Handy Converter for 2D Games Developers Developer Website: http://www.bluebulk.infoSwitch JS Control (Client Side): Switch JS control is a very light client side library to create switch(es) on web applications or mobile applications.VisaSys: Visa System????????: TODO::????

    Read the article

  • vmware nat internet connection

    - by ziftech
    Host: Windows Server 2008 / VMWare Server 2 Has Internet connection ip: 172.17.62.1 (NAT adapter) no gateway, no dns Guest: Windows Server 2003 ip: 172.17.62.2 (NAT) gateway 172.17.62.5 (set in VMware network manager for NAT) Host and guest can see each other, but guest have no internet connection (only ping by ip) In what may be the problem? HOST Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f1c1:3518:abb4:c05%24(Preferred) IPv4 Address. . . . . . . . . . . : 172.17.67.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 486559830 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CF-8C-9F-40-61-86-2B-8F-AD DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled GUEST DNS-suffix . . : Description. . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter Physical. . . . . . . . . : 00-0C-29-71-A5-43 DHCP . . . . . . . . . . . : no ip . . . . . . . . . . . . : 172.17.67.2 subnet mask . . . . . . . . . . : 255.255.255.0 gateway . . . . . . . . . . : 172.17.67.5 DNS . . . . . . . . . . . . : 8.8.8.8 All firewalls are down, I can ping hosts, but no telnet connection - telnet google.com 80

    Read the article

  • nginx reverse proxy cannot access apache virtual hosts

    - by Sc0rian
    I am setting up nginx as a reverse proxy. The server runs on directadmin and lamp stack. I have nginx running on port 81. I can access all my sites (including virtual ips) on the port 81. However when I forward the traffic from port 80 to 81, the virtual ips have a message saying "Apache is running normally". Server IPs are fine, and I can still access virtual IP's on 81. [root@~]# netstat -an | grep LISTEN | egrep ":80|:81" tcp 0 0 <virtual ip>:81 0.0.0.0:* LISTEN tcp 0 0 <virtual ip>:81 0.0.0.0:* LISTEN tcp 0 0 <serverip>:81 0.0.0.0:* LISTEN tcp 0 0 :::80 :::* LISTEN apache 24090 0.6 1.3 29252 13612 ? S 18:34 0:00 /usr/sbin/httpd -k start -DSSL apache 24092 0.9 2.1 39584 22056 ? S 18:34 0:00 /usr/sbin/httpd -k start -DSSL apache 24096 0.2 1.9 35892 20256 ? S 18:34 0:00 /usr/sbin/httpd -k start -DSSL apache 24120 0.3 1.7 35752 17840 ? S 18:34 0:00 /usr/sbin/httpd -k start -DSSL apache 24495 0.0 1.4 30892 14756 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24496 1.0 2.1 39892 22164 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24516 1.5 3.6 55496 38040 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24519 0.1 1.2 28996 13224 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24521 2.7 4.0 58244 41984 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24522 0.0 1.2 29124 12672 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24524 0.0 1.1 28740 12364 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24535 1.1 1.7 36008 17876 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24536 0.0 1.1 28592 12084 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24537 0.0 1.1 28592 12112 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24539 0.0 0.0 0 0 ? Z 18:35 0:00 [httpd] <defunct> apache 24540 0.0 1.1 28592 11540 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL apache 24541 0.0 1.1 28592 11548 ? S 18:35 0:00 /usr/sbin/httpd -k start -DSSL root 24548 0.0 0.0 4132 752 pts/0 R+ 18:35 0:00 egrep apache|nginx root 28238 0.0 0.0 19576 284 ? Ss May29 0:00 nginx: master process /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf apache 28239 0.0 0.0 19888 804 ? S May29 0:00 nginx: worker process apache 28240 0.0 0.0 19888 548 ? S May29 0:00 nginx: worker process apache 28241 0.0 0.0 19736 484 ? S May29 0:00 nginx: cache manager process here is my nginx conf: cat /usr/local/nginx/conf/nginx.conf user apache apache; worker_processes 2; # Set it according to what your CPU have. 4 Cores = 4 worker_rlimit_nofile 8192; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] ' '"$request" $status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; server_tokens off; access_log /var/log/nginx_access.log main; error_log /var/log/nginx_error.log debug; server_names_hash_bucket_size 64; sendfile on; tcp_nopush on; tcp_nodelay off; keepalive_timeout 30; gzip on; gzip_comp_level 9; gzip_proxied any; proxy_buffering on; proxy_cache_path /usr/local/nginx/proxy_temp levels=1:2 keys_zone=one:15m inactive=7d max_size=1000m; proxy_buffer_size 16k; proxy_buffers 100 8k; proxy_connect_timeout 60; proxy_send_timeout 60; proxy_read_timeout 60; server { listen <server ip>:81 default rcvbuf=8192 sndbuf=16384 backlog=32000; # Real IP here server_name <server host name> _; # "_" is for handle all hosts that are not described by server_name charset off; access_log /var/log/nginx_host_general.access.log main; location / { proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://<server ip>; # Real IP here client_max_body_size 16m; client_body_buffer_size 128k; proxy_buffering on; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 120; proxy_buffer_size 16k; proxy_buffers 32 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; } location /nginx_status { stub_status on; access_log off; allow 127.0.0.1; deny all; } } include /usr/local/nginx/vhosts/*.conf; } here is my vhost conf: # cat /usr/local/nginx/vhosts/1.conf server { listen <virt ip>:81 default rcvbuf=8192 sndbuf=16384 backlog=32000; # Real IP here server_name <virt domain name>.com ; # "_" is for handle all hosts that are not described by server_name charset off; access_log /var/log/nginx_host_general.access.log main; location / { proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://<virt ip>; # Real IP here client_max_body_size 16m; client_body_buffer_size 128k; proxy_buffering on; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 120; proxy_buffer_size 16k; proxy_buffers 32 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; } } Apache config: <VirtualHost xxxxxx:80 > ServerName www.<domain>.com ServerAlias www.<domain>.com <domain>.com ServerAdmin webmaster@<domain>.com DocumentRoot /home/<domain>/domains/<domain>.com/public_html ScriptAlias /cgi-bin/ /home/<domain>/domains/<domain>.com/public_html/cgi-bin/ UseCanonicalName OFF <IfModule !mod_ruid2.c> SuexecUserGroup <domain> <domain> </IfModule> <IfModule mod_ruid2.c> RMode config RUidGid <domain> <domain> RGroups apache access </IfModule> CustomLog /var/log/httpd/domains/<domain>.com.bytes bytes CustomLog /var/log/httpd/domains/<domain>.com.log combined ErrorLog /var/log/httpd/domains/<domain>.com.error.log <Directory /home/<domain>/domains/<domain>.com/public_html> Options +Includes -Indexes php_admin_flag engine ON php_admin_value sendmail_path '/usr/sbin/sendmail -t -i -f <domain>@<domain>.com' </Directory> <virtual ip address>:80 is a NameVirtualHost default server www.xx.com (/usr/local/directadmin/data/users/xx/httpd.conf:16) port 80 namevhost www.xx.com (/usr/local/directadmin/data/users/xx/httpd.conf:16) port 80 namevhost www.xx.co.uk (/usr/local/directadmin/data/users/xx/httpd.conf:107) port 80 namevhost www.xx.co.uk (/usr/local/directadmin/data/users/xx/httpd.conf:151) port 80 namevhost www.xx.co.uk (/usr/local/directadmin/data/users/xx/httpd.conf:195) <virtual ip address>:443 is a NameVirtualHost default server www.xx.com (/usr/local/directadmin/data/users/xx/httpd.conf:61) port 443 namevhost www.xx.com (/usr/local/directadmin/data/users/xx/httpd.conf:61) <server ip>:80 is a NameVirtualHost default server localhost (/etc/httpd/conf/extra/httpd-vhosts.conf:29) port 80 namevhost localhost (/etc/httpd/conf/extra/httpd-vhosts.conf:29) port 80 namevhost www.xx.co.uk (/usr/local/directadmin/data/users/admin/httpd.conf:16)

    Read the article

  • CodePlex Daily Summary for Thursday, November 07, 2013

    CodePlex Daily Summary for Thursday, November 07, 2013Popular ReleasesCompare .NET Objects: Version 1.7.4.0: Manual merge of patch 15325 from Farris to fix issues 9075 and 9076 relating to defects with Ignoring the Collection Order Applied patch 15263 from MariuszWojcik to support LINQ enumerators.Toolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2013.9.25): XrmToolbox improvement Correct changing connection from the status dropdown Tools improvement Updated tool Audit Center (v1.2013.9.10) -> Publish entities Iconator (v1.2013.9.27) -> Optimized asynchronous loading of images and entities MetadataDocumentGenerator (v1.2013.11.6) -> Correct system entities reading with incorrect attribute type Script Manager (v1.2013.9.27) -> Retrieve only custom events SiteMapEditor (v1.2013.11.7) -> Reset of CRM 2013 SiteMap ViewLayoutReplicator (v1.201...Event-Based Components AppBuilder: AB3.AppDesigner.59: Iteration 59 (Feature): By selecting the center thumb of a selected wire you can add a point attribute by context menu (to redirect a wire). Therefore all possible wire outlines are possible... New: AddNewWirePointAttributeFlow, AddNewWirePointAttributeAdapter, NewPointAttributeAdder Improved: LineAdorner, WireLineDecoratorBase, WireLineSourceToTargetDecorator, WiresRenderer, ... See: https://ebcappbuilder.codeplex.com/wikipage?title=Modify%20the%20view%20of%20a%20wire Coming soon: Iterat...Microsoft SQL Server Product Samples: Database: SQL Server 2014 CTP2 In-Memory OLTP Sample, based: This sample showcases the new In-Memory OLTP feature, which is part of SQL Server 2014 CTP2. It shows the new memory-optimized tables and natively-compiled stored procedures, and can be used to show the performance benefit of in-memory OLTP. Installation instructions for the sample are included in the file ‘awinmemsample.doc’, which is part of the download. You can ask a question about this sample at the SQL Server Samples Forum Composite C1 CMS - Open Source on .NET: Composite C1 4.1: Composite C1 4.1 (4.1.5058.34326) Write a review for this release - help us improve, recommend us. Getting started If you are new to Composite C1 and want to install it: http://docs.composite.net/Getting-started What's new in Composite C1 4.1 The following are highlights of major changes since Composite C1 4.0: General user features: Drag-and-drop images and files like PDF and Word directly from own your desktop and folders into page content Allow you to install Composite Form Builder ...xFunc: xFunc 2.10.1: Fixed https://github.com/sys27/xFunc/issues/60.Win_8 (??? Devel Studio 2 ??? 3): Win8 0.8 + Sample (.dvs): ???????------------------------------------------ 1. ????????? ??????????? ????????? ??????. 2. ?????????? ???? , ????????? ? ?????????? ???? ????. 3. ?????????? ?????? ??????. 4. ?????????? ????????? ???????????. 5. ????????????? ??? . English----------------------------------------------------------------------- 1. Added ability to load icons. 2. Fixed bugs related to obtaining names of shapes. 3. Fixed a memory leak. 4. Fixed some defects. 5. Optimized code. ---------------------------...ConEmu - Windows console with tabs: ConEmu 131105 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe"CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.9.0: Implemented Recent Scripts list Added checking for plugin updates from AboutBox Multiple formatting improvements/fixes Implemented selection of the CLR version when preparing distribution package Added project panel button for showing plugin shortcuts list Added 'What's New?' panel Fixed auto-formatting scrolling artifact Implemented navigation to "logical" file (vs. auto-generated) file from output panel To avoid the DLLs getting locked by OS use MSI file for the installation.Home Access Plus+: v9.7: Updated: JSON.net Fixed: Issue with the Windows 8 App Added: Windows 8.1 App Added: Win: Self Signed HAP+ Install Support Added: Win: Delete File Support Added: Timeout for the Logon Tracker Removed: Error Dialogs on the User Card Fixed: Green line showing over the booking form Note: a web.config file update is requiredxUnit.net - Unit testing framework for C# and .NET (a successor to NUnit): xUnit.net Visual Studio Runner: A placeholder for downloading Visual Studio runner VSIX files, in case the Gallery is down (or you want to downgrade to older versions).Social Network Importer for NodeXL: SocialNetImporter(v.1.9.1): This new version includes: - Include me option is back - Fixed the login bug reported latelyVeraCrypt: VeraCrypt version 1.0c: Changes between 1.0b and 1.0c (11 November 2013) : Set correctly the minimum required version in volumes header (this value must always follow the program version after any major changes). This also solves also the hidden volume issueCaptcha MVC: Captcha MVC 2.5: v 2.5: Added support for MVC 5. The DefaultCaptchaManager is no longer throws an error if the captcha values was entered incorrectly. Minor changes. v 2.4.1: Fixed issues with deleting incorrect values of the captcha token in the SessionStorageProvider. This could lead to a situation when the captcha was not working with the SessionStorageProvider. Minor changes. v 2.4: Changed the IIntelligencePolicy interface, added ICaptchaManager as parameter for all methods. Improved font size ...Duplica: duplica 0.2.498: this is first stable releaseDNN Blog: 06.00.01: 06.00.01 ReleaseThis is the first bugfix release of the new v6 blog module. These are the changes: Added some robustness in v5-v6 scripts to cater for some rare upgrade scenarios Changed the name of the module definition to avoid clash with Evoq Social Addition of sitemap providerVG-Ripper & PG-Ripper: VG-Ripper 2.9.50: changes NEW: Added Support for "ImageHostHQ.com" links NEW: Added Support for "ImgMoney.net" links NEW: Added Support for "ImgSavy.com" links NEW: Added Support for "PixTreat.com" links Bug fixesVidCoder: 1.5.11 Beta: Added Encode Details window. Exposes elapsed time, ETA, current and average FPS, running file size, current pass and pass progress. Open it by going to Windows -> Encode Details while an encode is running. Subtitle dialog now disables the "Burn In" checkbox when it's either unavailable or it's the only option. It also disables the "Forced Only" when the subtitle type doesn't support the "Forced" flag. Updated HandBrake core to SVN 5872. Fixed crash in the preview window when a source fil...Wsus Package Publisher: Release v1.3.1311.02: Add three new Actions in Custom Updates : Work with Files (Copy, Delete, Rename), Work with Folders (Add, Delete, Rename) and Work with Registry Keys (Add, Delete, Rename). Fix a bug, where after resigning an update, the display is not refresh. Modify the way WPP sort rows in 'Updates Detail Viewer' and 'Computer List Viewer' so that dates are correctly sorted. Add a Tab in the settings form to set Proxy settings when WPP needs to go on Internet. Fix a bug where 'Manage Catalogs Subsc...uComponents: uComponents v6.0.0: This release of uComponents will compile against and support the new API in Umbraco v6.1.0. What's new in uComponents v6.0.0? New DataTypesImage Point XML DropDownList XPath Templatable List New features / Resolved issuesThe following workitems have been implemented and/or resolved: 14781 14805 14808 14818 14854 14827 14868 14859 14790 14853 14790 DataType Grid 14788 14810 14873 14833 14864 14855 / 14860 14816 14823 Drag & Drop support for rows Su...New ProjectsAuto Mapping MVVM: A simple MVVM Kit that works with Windows 8 and Windows Phone 8, with the ability to automatically map between Views and ViewModels.BMS Converter: BMS Converter is a converter for .bms files (Be-Music Source), which converts them to audio and/or video files.Car Management: The software which is going to be developed aims to give an interface in order to manage cars booking with ABC University institution.Classic Algorithms: This is a collection of classic algorithms written in C#. I'll start with the Graphs.Community TFS Work Item Tracking Extensions: The Community TFS WIT Extensions project is a place to share tools and extensions to the TFS work item tracking system.D3N: "port" of D3 to .NETdoinik tara client: The Daily Star ClientLEGO MINDSTORMS EV3 API: API for the LEGO Mindstorms EV3 brick usable from desktop, Windows Phone and WinRT.LudejoWcf: Playground wcfMy Test: This is a demoPearson API Wrapper: Pearson API Wrapper enables you to develop Learning Apps faster !Pescar2013ShopAyelenArce: Lalalapescar2013-shop-ElectroShop: ya contiene: EF5 agrega: layouts bootstrap bootstrap js js linq(?) knockout(?) jquery jquery ui Pescar2013Shop-MaruMati: Venta de productos a través de una pagina web.Pescar2013Shop-The_Future_2014: primer proyecto.RatatoskSMS: SMS gateway based on library GSMComm, that can handle multiple GSM modems to send and recieve messages to/from database, with http interface.SharePoint Enhanced New: A replacement to the "New Document" split button in document libraries with a modal dialog displaying available document Content Types.Task Management Application: The Eisenhower Matrix with BacklogTridion: This project provides an analog to Tridion Core Services for older versions of Tridion that rely on the TOM (COM) architecture.Web Scripting - Assignment 2 - Website Prototype: Assignment 2 - Website PrototypeWindows Azure Custom Performance Counters: The project Windows Azure Custom Performance Counters is a startup task to help working with custom performance counters on web and worker roles.

    Read the article

  • e2fsck extremely slow, although enough memory exists

    - by kaefert
    I've got this external USB-Disk: kaefert@blechmobil:~$ lsusb -s 2:3 Bus 002 Device 003: ID 0bc2:3320 Seagate RSS LLC As can be seen in this dmesg output, there is some problem that prevents that disk from beeing mounted: kaefert@blechmobil:~$ dmesg ... [ 113.084079] usb 2-1: new high-speed USB device number 3 using ehci_hcd [ 113.217783] usb 2-1: New USB device found, idVendor=0bc2, idProduct=3320 [ 113.217787] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 113.217790] usb 2-1: Product: Expansion Desk [ 113.217792] usb 2-1: Manufacturer: Seagate [ 113.217794] usb 2-1: SerialNumber: NA4J4N6K [ 113.435404] usbcore: registered new interface driver uas [ 113.455315] Initializing USB Mass Storage driver... [ 113.468051] scsi5 : usb-storage 2-1:1.0 [ 113.468180] usbcore: registered new interface driver usb-storage [ 113.468182] USB Mass Storage support registered. [ 114.473105] scsi 5:0:0:0: Direct-Access Seagate Expansion Desk 070B PQ: 0 ANSI: 6 [ 114.474342] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.475089] sd 5:0:0:0: [sdb] Write Protect is off [ 114.475092] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 114.475959] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 114.477093] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.501649] sdb: sdb1 [ 114.502717] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.504354] sd 5:0:0:0: [sdb] Attached SCSI disk [ 116.804408] EXT4-fs (sdb1): ext4_check_descriptors: Checksum for group 3976 failed (47397!=61519) [ 116.804413] EXT4-fs (sdb1): group descriptors corrupted! ... So I went and fired up my favorite partition manager - gparted, and told it to verify and repair the partition sdb1. This made gparted call e2fsck (version 1.42.4 (12-Jun-2012)) e2fsck -f -y -v /dev/sdb1 Although gparted called e2fsck with the "-v" option, sadly it doesn't show me the output of my e2fsck process (bugreport https://bugzilla.gnome.org/show_bug.cgi?id=467925 ) I started this whole thing on Sunday (2012-11-04_2200) evening, so about 48 hours ago, this is what htop says about it now (2012-11-06-1900): PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 3704 root 39 19 1560M 1166M 768 R 98.0 19.5 42h56:43 e2fsck -f -y -v /dev/sdb1 Now I found a few posts on the internet that discuss e2fsck running slow, for example: http://gparted-forum.surf4.info/viewtopic.php?id=13613 where they write that its a good idea to see if the disk is just that slow because maybe its damaged, and I think these outputs tell me that this is not the case in my case: kaefert@blechmobil:~$ sudo hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 3562 MB in 2.00 seconds = 1783.29 MB/sec Timing buffered disk reads: 82 MB in 3.01 seconds = 27.26 MB/sec kaefert@blechmobil:~$ sudo hdparm /dev/sdb /dev/sdb: multcount = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 364801/255/63, sectors = 5860533160, start = 0 However, although I can read quickly from that disk, this disk speed doesn't seem to be used by e2fsck, considering tools like gkrellm or iotop or this: kaefert@blechmobil:~$ iostat -x Linux 3.2.0-2-amd64 (blechmobil) 2012-11-06 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 14,24 47,81 14,63 0,95 0,00 22,37 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sda 0,59 8,29 2,42 5,14 43,17 160,17 53,75 0,30 39,80 8,72 54,42 3,95 2,99 sdb 137,54 5,48 9,23 0,20 587,07 22,73 129,35 0,07 7,70 7,51 16,18 2,17 2,04 Now I researched a little bit on how to find out what e2fsck is doing with all that processor time, and I found the tool strace, which gives me this: kaefert@blechmobil:~$ sudo strace -p3704 lseek(4, 41026998272, SEEK_SET) = 41026998272 write(4, "\212\354K[_\361\3nl\212\245\352\255jR\303\354\312Yv\334p\253r\217\265\3567\325\257\3766"..., 4096) = 4096 lseek(4, 48404766720, SEEK_SET) = 48404766720 read(4, "\7t\260\366\346\337\304\210\33\267j\35\377'\31f\372\252\ffU\317.y\211\360\36\240c\30`\34"..., 4096) = 4096 lseek(4, 41027002368, SEEK_SET) = 41027002368 write(4, "\232]7Ws\321\352\t\1@[+5\263\334\276{\343zZx\352\21\316`1\271[\202\350R`"..., 4096) = 4096 lseek(4, 48404770816, SEEK_SET) = 48404770816 read(4, "\17\362r\230\327\25\346//\210H\v\311\3237\323K\304\306\361a\223\311\324\272?\213\tq \370\24"..., 4096) = 4096 lseek(4, 41027006464, SEEK_SET) = 41027006464 write(4, "\367yy>x\216?=\324Z\305\351\376&\25\244\210\271\22\306}\276\237\370(\214\205G\262\360\257#"..., 4096) = 4096 lseek(4, 48404774912, SEEK_SET) = 48404774912 read(4, "\365\25\0\21|T\0\21}3t_\272\373\222k\r\177\303\1\201\261\221$\261B\232\3142\21U\316"..., 4096) = 4096 ^CProcess 3704 detached around 16 of these lines every second, so 4 read and 4 write operations every second, which I don't consider to be a lot.. And finally, my question: Will this process ever finish? If those numbers from fseek (48404774912) represent bytes, that would be something like 45 gigabytes, with this beeing a 3 terrabyte disk, which would give me 134 days to go, if the speed stays constant, and e2fsck scans the disk like this completly and only once. Do you have some advice for me? I have most of the data on that disk elsewhere, but I've put a lot of hours into sorting and merging it to this disk, so I would prefer to getting this disk up and running again, without formatting it anew. I don't think that the hardware is damaged since the disk is only a few months and since I can't see any I/O errors in the dmesg output. UPDATE: I just looked at the strace output again (2012-11-06_2300), now it looks like this: lseek(4, 1419860611072, SEEK_SET) = 1419860611072 read(4, "3#\f\2447\335\0\22A\355\374\276j\204'\207|\217V|\23\245[\7VP\251\242\276\207\317:"..., 4096) = 4096 lseek(4, 43018145792, SEEK_SET) = 43018145792 write(4, "]\206\231\342Y\204-2I\362\242\344\6R\205\361\324\177\265\317C\334V\324\260\334\275t=\10F."..., 4096) = 4096 lseek(4, 1419860615168, SEEK_SET) = 1419860615168 read(4, "\262\305\314Y\367\37x\326\245\226\226\320N\333$s\34\204\311\222\7\315\236\336\300TK\337\264\236\211n"..., 4096) = 4096 lseek(4, 43018149888, SEEK_SET) = 43018149888 write(4, "\271\224m\311\224\25!I\376\16;\377\0\223H\25Yd\201Y\342\r\203\271\24eG<\202{\373V"..., 4096) = 4096 lseek(4, 1419860619264, SEEK_SET) = 1419860619264 read(4, ";d\360\177\n\346\253\210\222|\250\352T\335M\33\260\320\261\7g\222P\344H?t\240\20\2548\310"..., 4096) = 4096 lseek(4, 43018153984, SEEK_SET) = 43018153984 write(4, "\360\252j\317\310\251G\227\335{\214`\341\267\31Y\202\360\v\374\307oq\3063\217Z\223\313\36D\211"..., 4096) = 4096 So the numbers in the lseek lines before the reads, like 1419860619264 are already a lot bigger, standing for 1.29 terabytes if those numbers are bytes, so it doesn't seem to be a linear progress on a big scale, maybe there are only some areas that need work, that have big gaps in between them. UPDATE2: Okey, big disappointment, the numbers are back to very small again (2012-11-07_0720) lseek(4, 52174548992, SEEK_SET) = 52174548992 read(4, "\374\312\22\\\325\215\213\23\0357U\222\246\370v^f(\312|f\212\362\343\375\373\342\4\204mU6"..., 4096) = 4096 lseek(4, 46603526144, SEEK_SET) = 46603526144 write(4, "\370\261\223\227\23?\4\4\217\264\320_Am\246CQ\313^\203U\253\274\204\277\2564n\227\177\267\343"..., 4096) = 4096 so either e2fsck goes over the data multiple times, or it just hops back and forth multiple times. Or my assumption that those numbers are bytes is wrong. UPDATE3: Since it's mentioned here http://forums.fedoraforum.org/showthread.php?t=282125&page=2 that you can testisk while e2fsck is running, i tried that, though not with a lot of success. When asking testdisk to display the data of my partition, this is what I get: TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org 1 P Linux 0 4 5 45600 40 8 732566272 Can't open filesystem. Filesystem seems damaged. And this is what strace currently gives me (2012-11-07_1030) lseek(4, 212460343296, SEEK_SET) = 212460343296 read(4, "\315Mb\265v\377Gn \24\f\205EHh\2349~\330\273\203\3375\206\10\r3=W\210\372\352"..., 4096) = 4096 lseek(4, 47347830784, SEEK_SET) = 47347830784 write(4, "]\204\223\300I\357\4\26\33+\243\312G\230\250\371*m2U\t_\215\265J \252\342Pm\360D"..., 4096) = 4096 (times are in CET)

    Read the article

  • 12c - flashforward, flashback or see it as of now...

    - by noreply(at)blogger.com (Thomas Kyte)
    Oracle 9i exposed flashback query to developers for the first time.  The ability to flashback query dates back to version 4 however (it just wasn't exposed).  Every time you run a query in Oracle it is in fact a flashback query - it is what multi-versioning is all about.However, there was never a flashforward query (well, ok, the workspace manager has this capability - but with lots of extra baggage).  We've never been able to ask a table "what will you look like tomorrow" - but now we do.The capability is called Temporal Validity.  If you have a table with data that is effective dated - has a "start date" and "end date" column in it - we can now query it using flashback query like syntax.  The twist is - the date we "flashback" to can be in the future.  It works by rewriting the query to transparently the necessary where clause and filter out the right rows for the right period of time - and since you can have records whose start date is in the future - you can query a table and see what it would look like at some future time.Here is a quick example, we'll start with a table:ops$tkyte%ORA12CR1> create table addresses  2  ( empno       number,  3    addr_data   varchar2(30),  4    start_date  date,  5    end_date    date,  6    period for valid(start_date,end_date)  7  )  8  /Table created.the new bit is on line 6 (it can be altered into an existing table - so any table  you have with a start/end date column will be a candidate).  The keyword is PERIOD, valid is an identifier I chose - it could have been foobar, valid just sounds nice in the query later.  You identify the columns in your table - or we can create them for you if they don't exist.  Then you just create some data:ops$tkyte%ORA12CR1> insert into addresses (empno, addr_data, start_date, end_date )  2  values ( 1234, '123 Main Street', trunc(sysdate-5), trunc(sysdate-2) );1 row created.ops$tkyte%ORA12CR1>ops$tkyte%ORA12CR1> insert into addresses (empno, addr_data, start_date, end_date )  2  values ( 1234, '456 Fleet Street', trunc(sysdate-1), trunc(sysdate+1) );1 row created.ops$tkyte%ORA12CR1>ops$tkyte%ORA12CR1> insert into addresses (empno, addr_data, start_date, end_date )  2  values ( 1234, '789 1st Ave', trunc(sysdate+2), null );1 row created.and you can either see all of the data:ops$tkyte%ORA12CR1> select * from addresses;     EMPNO ADDR_DATA                      START_DAT END_DATE---------- ------------------------------ --------- ---------      1234 123 Main Street                27-JUN-13 30-JUN-13      1234 456 Fleet Street               01-JUL-13 03-JUL-13      1234 789 1st Ave                    04-JUL-13or query "as of" some point in time - as  you can see in the predicate section - it is just doing a query rewrite to automate the "where" filters:ops$tkyte%ORA12CR1> select * from addresses as of period for valid sysdate-3;     EMPNO ADDR_DATA                      START_DAT END_DATE---------- ------------------------------ --------- ---------      1234 123 Main Street                27-JUN-13 30-JUN-13ops$tkyte%ORA12CR1> @planops$tkyte%ORA12CR1> select * from table(dbms_xplan.display_cursor);PLAN_TABLE_OUTPUT-------------------------------------------------------------------------------SQL_ID  cthtvvm0dxvva, child number 0-------------------------------------select * from addresses as of period for valid sysdate-3Plan hash value: 3184888728-------------------------------------------------------------------------------| Id  | Operation         | Name      | Rows  | Bytes | Cost (%CPU)| Time     |-------------------------------------------------------------------------------|   0 | SELECT STATEMENT  |           |       |       |     3 (100)|          ||*  1 |  TABLE ACCESS FULL| ADDRESSES |     1 |    48 |     3   (0)| 00:00:01 |-------------------------------------------------------------------------------Predicate Information (identified by operation id):---------------------------------------------------   1 - filter((("T"."START_DATE" IS NULL OR              "T"."START_DATE"<=SYSDATE@!-3) AND ("T"."END_DATE" IS NULL OR              "T"."END_DATE">SYSDATE@!-3)))Note-----   - dynamic statistics used: dynamic sampling (level=2)24 rows selected.ops$tkyte%ORA12CR1> select * from addresses as of period for valid sysdate;     EMPNO ADDR_DATA                      START_DAT END_DATE---------- ------------------------------ --------- ---------      1234 456 Fleet Street               01-JUL-13 03-JUL-13ops$tkyte%ORA12CR1> @planops$tkyte%ORA12CR1> select * from table(dbms_xplan.display_cursor);PLAN_TABLE_OUTPUT-------------------------------------------------------------------------------SQL_ID  26ubyhw9hgk7z, child number 0-------------------------------------select * from addresses as of period for valid sysdatePlan hash value: 3184888728-------------------------------------------------------------------------------| Id  | Operation         | Name      | Rows  | Bytes | Cost (%CPU)| Time     |-------------------------------------------------------------------------------|   0 | SELECT STATEMENT  |           |       |       |     3 (100)|          ||*  1 |  TABLE ACCESS FULL| ADDRESSES |     1 |    48 |     3   (0)| 00:00:01 |-------------------------------------------------------------------------------Predicate Information (identified by operation id):---------------------------------------------------   1 - filter((("T"."START_DATE" IS NULL OR              "T"."START_DATE"<=SYSDATE@!) AND ("T"."END_DATE" IS NULL OR              "T"."END_DATE">SYSDATE@!)))Note-----   - dynamic statistics used: dynamic sampling (level=2)24 rows selected.ops$tkyte%ORA12CR1> select * from addresses as of period for valid sysdate+3;     EMPNO ADDR_DATA                      START_DAT END_DATE---------- ------------------------------ --------- ---------      1234 789 1st Ave                    04-JUL-13ops$tkyte%ORA12CR1> @planops$tkyte%ORA12CR1> select * from table(dbms_xplan.display_cursor);PLAN_TABLE_OUTPUT-------------------------------------------------------------------------------SQL_ID  36bq7shnhc888, child number 0-------------------------------------select * from addresses as of period for valid sysdate+3Plan hash value: 3184888728-------------------------------------------------------------------------------| Id  | Operation         | Name      | Rows  | Bytes | Cost (%CPU)| Time     |-------------------------------------------------------------------------------|   0 | SELECT STATEMENT  |           |       |       |     3 (100)|          ||*  1 |  TABLE ACCESS FULL| ADDRESSES |     1 |    48 |     3   (0)| 00:00:01 |-------------------------------------------------------------------------------Predicate Information (identified by operation id):---------------------------------------------------   1 - filter((("T"."START_DATE" IS NULL OR              "T"."START_DATE"<=SYSDATE@!+3) AND ("T"."END_DATE" IS NULL OR              "T"."END_DATE">SYSDATE@!+3)))Note-----   - dynamic statistics used: dynamic sampling (level=2)24 rows selected.All in all a nice, easy way to query effective dated information as of a point in time without a complex where clause.  You need to maintain the data - it isn't that a delete will turn into an update the end dates a record or anything - but if you have tables with start/end dates, this will make it much easier to query them.

    Read the article

  • Autounattend.xml not being recognized in VirtualBox

    - by beagle
    I am working my way through the steps on this page to prepare an unattended installation of Windows 7 Enterprise x64 for purposes of a college assignment which simply requires the process to be carried out and documented. Both the "technician" and "reference" computers are virtual machines created in VirtualBox 4.3.12, as will be the destination computer. I seem to have successfully completed Step 1, building an Autounattend.xml answer file using Windows System Image Manager, in as far as the answer file validates successfully. The problem arises when I try to install Windows on the reference machine from the DVD image in conjunction with the Autounattend file on a USB drive. I have tried a couple of different USB devices, and the devices themselves seem to be recognized, but the answer file does not, as instead of taking the configuration settings from the file the user interface appears as in a manual installation. Has anyone come across this problem or a solution? The xml created by Windows SIM is below for reference in case the problem is with the file itself. <?xml version="1.0" encoding="utf-8"?> <unattend xmlns="urn:schemas-microsoft-com:unattend"> <settings pass="oobeSystem"> <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <Reseal> <Mode>Audit</Mode> </Reseal> </component> <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <OOBE> <HideEULAPage>true</HideEULAPage> <ProtectYourPC>3</ProtectYourPC> </OOBE> </component> </settings> <settings pass="windowsPE"> <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <SetupUILanguage> <UILanguage>en-IE</UILanguage> </SetupUILanguage> <InputLocale>en-IE</InputLocale> <SystemLocale>en-IE</SystemLocale> <UILanguage>en-IE</UILanguage> <UserLocale>en-IE</UserLocale> </component> <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <DiskConfiguration> <Disk wcm:action="add"> <CreatePartitions> <CreatePartition wcm:action="add"> <Order>1</Order> <Size>300</Size> <Type>Primary</Type> </CreatePartition> <CreatePartition wcm:action="add"> <Order>2</Order> <Extend>true</Extend> <Type>Primary</Type> </CreatePartition> </CreatePartitions> <ModifyPartitions> <ModifyPartition wcm:action="add"> <Active>true</Active> <Format>NTFS</Format> <Label>System</Label> <Order>1</Order> <PartitionID>1</PartitionID> </ModifyPartition> <ModifyPartition wcm:action="add"> <Format>NTFS</Format> <Label>Windows</Label> <Order>2</Order> <PartitionID>2</PartitionID> </ModifyPartition> </ModifyPartitions> <DiskID>0</DiskID> <WillWipeDisk>true</WillWipeDisk> </Disk> <WillShowUI>OnError</WillShowUI> </DiskConfiguration> <ImageInstall> <OSImage> <InstallTo> <DiskID>0</DiskID> <PartitionID>2</PartitionID> </InstallTo> <InstallToAvailablePartition>false</InstallToAvailablePartition> <WillShowUI>OnError</WillShowUI> </OSImage> </ImageInstall> <UserData> <ProductKey> <WillShowUI>OnError</WillShowUI> </ProductKey> <AcceptEula>true</AcceptEula> </UserData> </component> </settings> <settings pass="specialize"> <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <Home_Page>http://www.example.com</Home_Page> </component> </settings> <cpi:offlineImage cpi:source="wim://technician/users/user/desktop/install.wim#Windows 7 ENTERPRISE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />

    Read the article

  • CodePlex Daily Summary for Thursday, October 11, 2012

    CodePlex Daily Summary for Thursday, October 11, 2012Popular ReleasesOstrivDB: OstrivDB 0.1: - Storage configuration: objects serialization (Xml, Json), storage file compressing, data block size. - Caching for Select queries. - Indexing. - Batch of queries. - No special query language (LINQ used). - Integrated sorting and paging. - Multithreaded data processing.Mido: Mido v0.7: Mido is the simplest utility that helps to make watermarks on images and resize them. It has a very thin installer. The program has beta mark but it is able to draw watermark text, watermark images, resize pictures. Change list: + Opacity option + Stroke option + Bold, italic, underline options + Show progress during loading of images + Allow rotate watermart + Allow write multiline text as watermark + Add text aligment if text contains several lines + Add button 'clear custom position' + A...D3 Loot Tracker: 1.5.4: Fixed a bug where the server ip was not logged properly in the stats file.Captcha MVC: Captcha Mvc 2.1.2: v 2.1.2: Fixed problem with serialization. Made all classes from a namespace Jetbrains.Annotaions as the internal. Added autocomplete attribute and autocorrect attribute for captcha input element. Minor changes. v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial captcha. Now you can easily customize the layout, s...DotNetNuke® Community Edition CMS: 06.02.04: Major Highlights Fixed issue where the module printing function was only visible to administrators Fixed issue where pane level skinning was being assigned to a default container for any content pane Fixed issue when using password aging and FB / Google authentication Fixed issue that was causing the DateEditControl to not load the assigned value Fixed issue that stopped additional profile properties to be displayed in the member directory after modifying the template Fixed er...Advanced DataGridView with Excel-like auto filter: 1.0.0.0: ?????? ??????Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.69: Fix for issue #18766: build task should not build the output if it's newer than all the input files. Fix for Issue #18764: build taks -res switch not working. update build task to concatenate input source and then minify, rather than minify and then concatenate. include resource string-replacement root name in the assumed globals list. Stop replacing new Date().getTime() with +new Date -- the latter is smaller, but turns out it executes up to 45% slower. add CSS support for single-...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes NOTE:...VidCoder: 1.4.4 Beta: Fixed inability to create new presets with "Save As".MCEBuddy 2.x: MCEBuddy 2.3.2: Changelog for 2.3.2 (32bit and 64bit) 1. Added support for generating XBMC XML NFO files for files in the conversion queue (store it along with the source video with source video name.nfo). Right click on the file in queue and select generate XML 2. UI bugifx, start and end trim box locations interchanged 3. Added support for removing commercials from non DVRMS/WTV files (MP4, AVI etc) 4. Now checking for Firewall port status before enabling (might help with some firewall problems) 5. User In...Sandcastle Help File Builder: SHFB v1.9.5.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release supports the Sandcastle October 2012 Release (v2.7.1.0). It includes full support for generating, installing, and removing MS Help Viewer files. This new release suppor...ClosedXML - The easy way to OpenXML: ClosedXML 0.68.0: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Json.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.TelerikMvcGridCustomBindingHelper: Version 1.0.15.279-RC3: TelerikMvcGridCustomBindingHelper 1.0.15.279 RC3 Release notes: This is a RC version (hopefully the last one), please test and report any error or problem you encounter. Configurable null handling when filtering (AcceptNullValuesWhenFiltering, NullSubstitutes and NullAliases) Internal DynamicWhereClause improvments GridGridCustomBindingHelper.UseProjections method now acept ProjectionsOptions parameter for easely determine which properties should be projected Isolate and hide some are...JSLint for Visual Studio 2010: 1.4.2: 1.4.2patterns & practices: Prism: Prism for .NET 4.5: This is a release does not include any functionality changes over Prism 4.1 Desktop. These assemblies target .NET 4.5. These assemblies also were compiled against updated dependencies: Unity 3.0 and Common Service Locator (Portable Class Library).Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y...Z3: Z3 4.1.2: Minor fixes. Now, z3 compiles with gcc 4.7.x.NET Micro Framework: .NET MF 4.3 (Beta): This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC support) Improved diagnostic information for deployment Decreased boot time Bug fixes Work Item 1736 - Create link for MFDeploy under start menu Work Item 1504 - Customizing lwIP o...New Projects.NET 4.0 Object/Function DLL interface: A Visual Basic .NET 4.0 Object / Function interface for quick and easy updating.AzureDirectory Library for Lucene.Net: This project allows you to create Lucene Indexes via a Lucene Directory object which uses Windows Azure BlobStorage for persistent storage.Building Modern Mobile Web Apps: This project provides guidance on building mobile web experiences using HTML5, CSS3, and JavaScript. Developing web apps for mobile browsers can be less forgiviC# Singleton Base-Class: C# Singleton Base Class is a single, simple C# class used to implement the Singleton pattern through inheritance.C++ Unit Test Library for Windows Store apps with Async Helper: This Visual Studio extension will install a project template for C++ Unit Test Library for Windows Store apps that contains async helper.Citrix Mobile Application SDK Samples: This site contains our latest prototype samples for the Citrix Mobile Application SDK for you to play with.eBrain Engine: eBrain Engine is a software to administer neuropsychological tests by means of advanced I/F devices like BCI P300 and eye-tracking systemsFairycake: A game about a little witch. Java. FedEx Connector for AbleCommerce Gold: This plugin provides FedEx rating and tracking services for the AbleCommerce shopping cart.Free - Simple Phone Book (SimPB): An alternative to backup your telephone contacts. Portable, easy to use, multilingual.GPXLocalTime2UTC: Time Format Converter, from Local to UTC, for GPX Files A small utility made to open GPX files (XML), search for the "time" tag, then transform the local time Grid Solutions Framework: Core classes to manage, analyze, and visualize real-time and historical data. This project combines the time-series framework and TVA code library projects.HireMe: HireMe is a HR application that works in conjunction with the HiremeMagazine.com website. The app will run in Android, iOS and WebOS.my-sim-asdf: my greate toolOdeToFoodMvc4: Source code for "Building Applications with ASP.NET MVC 4"OrgCharts for SharePoint: Months of planning, design, development and testing have gone into a truly phenomenal Org Chart experiencePDC BW2: A pkm editor application that tries to make easier legal pkm Packed with Legality Analysis, Event downloader and more...PI Payroll system: This is a payroll system for People Index, LLC.Project13251011: fsdQuickWick.NET - Agile Pproject Management: QuickWick.NET is a simple and effective web-based solution for agile project management.SharePoint 2010 Top Nav: This project was created when a project I was on required a Navigation scheme to manage site collections. SisGAC: Sistema de Gerenciamento de Artigos para CongressosTriDes_project_3AO: encryptohideVB6Doc: Visual Basic 6 Documentor (VB6 Doc)VideoChat: Simple VideoChat web-application on ASP.NET MVC4, SignalR, Wowza Media Server/Windows Updater Open: This is an alternative to the Windows Update software on all versions of Windows OS and the WSUS provided for corporations to update multiple machines.WOWAddonsUpdater: WPF App to update lua addons for the Blizzard World of warcraft gameyygua: email:huliang@yahoo.cnZJUDTS2: ????Silverlight?????????

    Read the article

  • ????ASMM

    - by Liu Maclean(???)
    ???Oracle??????????????SGA/PGA???,????10g????????????ASMM????,????????ASMM?????????Oracle??????????,?ASMM??????DBA????????????;????????ASMM???????????????DBA???:????????????DB,?????????????DBA?????????????????????????????????,ASMM??????????,???????????,??????????,??????????????????;?10g release 1?10.2??????ASMM?????????????,???????ASMM????????ASMM?????startup???????????ASMM??AMM??,????????DBA????SGA/PGA?????????”??”??”???”???,???????????DBA????chemist(???????1??2??????????????)? ?????????????????ASMM?????,?????????????…… Oracle?SGA???????9i???????????,????: Buffer Cache ????????????,??????????????? Default Pool                  ??????,???DB_CACHE_SIZE?? Keep Pool                     ??????,???DB_KEEP_CACHE_SIZE?? Non standard pool         ???????,???DB_nK_cache_size?? Recycle pool                 ???,???db_recycle_cache_size?? Shared Pool ???,???shared_pool_size?? Library cache   ?????? Row cache      ???,?????? Java Pool         java?,???Java_pool_size?? Large Pool       ??,???Large_pool_size?? Fixed SGA       ???SGA??,???Oracle???????,?????????granule? ?9i?????ASMM,???????????SGA,??????MSMM??9i???buffer cache??????????,?????????????????????????,???9i?????????????,?????????????????????????? ????SGA?????: ?????shared pool?default buffer pool????????,??????????? ?9i???????????(advisor),?????????? ??????????????? ?????????,?????? ?????,?????ORA-04031?????????? ASMM?????: ?????????? ???????????????? ???????sga_target?? ???????????,??????????? ??MSMM???????: ???? ???? ?????? ???? ??????????,??????????? ??????????????????,??????????ORA-04031??? ASMM???????????:1.??????sga_target???????2.???????,???:????(memory component),????(memory broker)???????(memory mechanism)3.????(memory advisor) ASMM????????????(Automatically set),??????:shared_pool_size?db_cache_size?java_pool_size?large_pool _size?streams_pool_size;?????????????????,???:db_keep_cache_size?db_recycle_cache_size?db_nk_cache_size?log_buffer????SGA?????,????????????????,??log_buffer?fixed sga??????????????? ??ASMM?????????sga_target??,???????ASMM??????????????????db_cache_size?java_pool_size???,?????????????????????,????????????????????(???)????????,Oracle?????????(granule,?SGA<1GB?granule???4M,?SGA>1GB?granule???16M)???????,??????????????buffer cache,??????????????????(granule)??????????????????????sga_target??,???????????????????(dism,???????)???ASMM?????????????statistics_level?????typical?ALL,?????BASIC??MMON????(Memory Monitor is a background process that gathers memory statistics (snapshots) stores this information in the AWR (automatic workload repository). MMON is also responsible for issuing alerts for metrics that exceed their thresholds)?????????????????????ASMM?????,???????????sga_target?????statistics_level?BASIC: SQL> show parameter sga NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ lock_sga boolean FALSE pre_page_sga boolean FALSE sga_max_size big integer 2000M sga_target big integer 2000M SQL> show parameter sga_target NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ sga_target big integer 2000M SQL> alter system set statistics_level=BASIC; alter system set statistics_level=BASIC * ERROR at line 1: ORA-02097: parameter cannot be modified because specified value is invalid ORA-00830: cannot set statistics_level to BASIC with auto-tune SGA enabled ?????server parameter file?spfile??,ASMM????shutdown??????????????(Oracle???????,????????)???spfile?,?????strings?????spfile????????????????????,?: G10R2.__db_cache_size=973078528 G10R2.__java_pool_size=16777216 G10R2.__large_pool_size=16777216 G10R2.__shared_pool_size=1006632960 G10R2.__streams_pool_size=67108864 ???spfile?????????????????,???????????”???”?????,??????????”??”?? ?ASMM?????????????? ?????(tunable):????????????????????????????buffer cache?????????,cache????????????????,?????????? IO????????????????????????????Library cache????? subheap????,?????????????????????????????????(open cursors)?????????client??????????????buffer cache???????,???????????pin??buffer???(???????) ?????(Un-tunable):???????????????????,?????????????????,?????????????????????????large pool?????? ??????(Fixed Size):???????????,??????????????????????????????????????? ????????????????(memory resize request)?????????,?????: ??????(Immediate Request):???????????ASMM????????????????????????(chunk)?,??????OUT-OF-MEMORY(ORA-04031)???,????????????????????(granule)????????????????????granule,????????????,?????????????????????????????,????granule??????????????? ??????(Deferred Request):???????????????????????????,??????????????granule???????????????MMON??????????delta. ??????(Manual Request):????????????alter system?????????????????????????????????????????????????granule,??????grow?????ORA-4033??,?????shrink?????ORA-4034??? ?ASMM????,????(Memory Broker)????????????????????????????(Deferred)??????????????????????(auto-tunable component)???????????????,???????????????MMON??????????????????????????????????,????????????????;MMON????Memory Broker?????????????????????????MMON????????????????????????????????????????(resize request system queue)?MMAN????(Memory Manager is a background process that manages the dynamic resizing of SGA memory areas as the workload increases or decreases)??????????????????? ?10gR1?Shared Pool?shrink??????????,?????????????Buffer Cache???????????granule,????Buffer Cache?granule????granule header?Metadata(???buffer header??RAC??Lock Elements)????,?????????????????????shared pool????????duration(?????)?chunk??????granule?,????????????granule??10gR2????Buffer Cache Granule????????granule header?buffer?Metadata(buffer header?LE)????,??shared pool???duration?chunk????????granule,??????buffer cache?shared pool??????????????10gr2?streams pool?????????(???????streams pool duration????) ??????????(Donor,???trace????)???,?????????granule???buffer cache,????granule????????????: ????granule???????granule header ?????chunk????granule?????????buffer header ???,???chunk??????????????????????metadata? ???2-4??,???granule???? ??????????????????,??buffer cache??granule???shared pool?,???????: MMAN??????????buffer cache???granule MMAN????granule??quiesce???(Moving 1 granule from inuse to quiesce list of DEFAULT buffer cache for an immediate req) DBWR???????quiesced???granule????buffer(dirty buffer) MMAN??shared pool????????(consume callback),granule?free?chunk???shared pool??(consume)?,????????????????????granule????shared granule??????,???????????granule???????????,??????pin??buffer??Metadata(???buffer header?LE)?????buffer cache??? ???granule???????shared pool,???granule?????shared??? ?????ASMM???????????,??????????: _enabled_shared_pool_duration:?????????10g????shared pool duration??,?????sga_target?0?????false;???10.2.0.5??cursor_space_for_time???true??????false,???10.2.0.5??cursor_space_for_time????? _memory_broker_shrink_heaps:???????0??Oracle?????shared pool?java pool,??????0,??shrink request??????????????????? _memory_management_tracing: ???????MMON?MMAN??????????(advisor)?????(Memory Broker)?????trace???;??ORA-04031????????36,???8?????????????trace,???23????Memory Broker decision???,???32???cache resize???;??????????: Level Contents 0×01 Enables statistics tracing 0×02 Enables policy tracing 0×04 Enables transfer of granules tracing 0×08 Enables startup tracing 0×10 Enables tuning tracing 0×20 Enables cache tracing ?????????_memory_management_tracing?????DUMP_TRANSFER_OPS????????????????,?????????????????trace?????????mman_trace?transfer_ops_dump? SQL> alter system set "_memory_management_tracing"=63; System altered Operation make shared pool grow and buffer cache shrink!!!.............. ???????granule?????,????default buffer pool?resize??: AUTO SGA: Request 0xdc9c2628 after pre-processing, ret=0 /* ???0xdc9c2628??????addr */ AUTO SGA: IMMEDIATE, FG request 0xdc9c2628 /* ???????????Immediate???? */ AUTO SGA: Receiver of memory is shared pool, size=16, state=3, flg=0 /* ?????????shared pool,???,????16?granule,??grow?? */ AUTO SGA: Donor of memory is DEFAULT buffer cache, size=106, state=4, flg=0 /* ???????Default buffer cache,????,????106?granule,??shrink?? */ AUTO SGA: Memory requested=3896, remaining=3896 /* ??immeidate request???????3896 bytes */ AUTO SGA: Memory received=0, minreq=3896, gransz=16777216 /* ????free?granule,??received?0,gransz?granule??? */ AUTO SGA: Request 0xdc9c2628 status is INACTIVE /* ??????????,??????inactive?? */ AUTO SGA: Init bef rsz for request 0xdc9c2628 /* ????????before-process???? */ AUTO SGA: Set rq dc9c2628 status to PENDING /* ?request??pending?? */ AUTO SGA: 0xca000000 rem=3896, rcvd=16777216, 105, 16777216, 17 /* ???????0xca000000?16M??granule */ AUTO SGA: Returning 4 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 4, 1, a AUTO SGA: Resize done for pool DEFAULT, 8192 /* ???default pool?resize */ AUTO SGA: Init aft rsz for request 0xdc9c2628 AUTO SGA: Request 0xdc9c2628 after processing AUTO SGA: IMMEDIATE, FG request 0x7fff917964a0 AUTO SGA: Receiver of memory is shared pool, size=17, state=0, flg=0 AUTO SGA: Donor of memory is DEFAULT buffer cache, size=105, state=0, flg=0 AUTO SGA: Memory requested=3896, remaining=0 AUTO SGA: Memory received=16777216, minreq=3896, gransz=16777216 AUTO SGA: Request 0x7fff917964a0 status is COMPLETE /* shared pool????16M?granule */ AUTO SGA: activated granule 0xca000000 of shared pool ?????partial granule????????????trace: AUTO SGA: Request 0xdc9c2628 after pre-processing, ret=0 AUTO SGA: IMMEDIATE, FG request 0xdc9c2628 AUTO SGA: Receiver of memory is shared pool, size=82, state=3, flg=1 AUTO SGA: Donor of memory is DEFAULT buffer cache, size=36, state=4, flg=1 /* ????????shared pool,?????default buffer cache */ AUTO SGA: Memory requested=4120, remaining=4120 AUTO SGA: Memory received=0, minreq=4120, gransz=16777216 AUTO SGA: Request 0xdc9c2628 status is INACTIVE AUTO SGA: Init bef rsz for request 0xdc9c2628 AUTO SGA: Set rq dc9c2628 status to PENDING AUTO SGA: Moving granule 0x93000000 of DEFAULT buffer cache to activate list AUTO SGA: Moving 1 granule 0x8c000000 from inuse to quiesce list of DEFAULT buffer cache for an immediate req /* ???buffer cache??????0x8c000000?granule??????inuse list, ???????quiesce list? */ AUTO SGA: Returning 0 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 0, 1, 20a AUTO SGA: activated granule 0x93000000 of DEFAULT buffer cache AUTO SGA: NOT_FREE for imm req for gran 0x8c000000 / * ??dbwr??0x8c000000 granule????dirty buffer */ AUTO SGA: Returning 0 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 0, 1, 20a AUTO SGA: NOT_FREE for imm req for gran 0x8c000000 AUTO SGA: Returning 0 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 0, 1, 20a AUTO SGA: NOT_FREE for imm req for gran 0x8c000000 AUTO SGA: Returning 0 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 0, 1, 20a AUTO SGA: NOT_FREE for imm req for gran 0x8c000000 AUTO SGA: Returning 0 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 0, 1, 20a AUTO SGA: NOT_FREE for imm req for gran 0x8c000000 AUTO SGA: Returning 0 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 0, 1, 20a AUTO SGA: NOT_FREE for imm req for gran 0x8c000000 ......................................... AUTO SGA: Rcv shared pool consuming 8192 from 0x8c000000 in granule 0x8c000000; owner is DEFAULT buffer cache AUTO SGA: Rcv shared pool consuming 90112 from 0x8c002000 in granule 0x8c000000; owner is DEFAULT buffer cache AUTO SGA: Rcv shared pool consuming 24576 from 0x8c01a000 in granule 0x8c000000; owner is DEFAULT buffer cache AUTO SGA: Rcv shared pool consuming 65536 from 0x8c022000 in granule 0x8c000000; owner is DEFAULT buffer cache AUTO SGA: Rcv shared pool consuming 131072 from 0x8c034000 in granule 0x8c000000; owner is DEFAULT buffer cache AUTO SGA: Rcv shared pool consuming 286720 from 0x8c056000 in granule 0x8c000000; owner is DEFAULT buffer cache AUTO SGA: Rcv shared pool consuming 98304 from 0x8c09e000 in granule 0x8c000000; owner is DEFAULT buffer cache AUTO SGA: Rcv shared pool consuming 106496 from 0x8c0b8000 in granule 0x8c000000; owner is DEFAULT buffer cache ..................... /* ??shared pool????0x8c000000 granule??chunk, ??granule?owner????default buffer cache */ AUTO SGA: Imm xfer 0x8c000000 from quiesce list of DEFAULT buffer cache to partial inuse list of shared pool /* ???0x8c000000 granule?default buffer cache????????shared pool????inuse list */ AUTO SGA: Returning 4 from kmgs_process for request dc9c2628 AUTO SGA: Process req dc9c2628 ret 4, 1, 20a AUTO SGA: Init aft rsz for request 0xdc9c2628 AUTO SGA: Request 0xdc9c2628 after processing AUTO SGA: IMMEDIATE, FG request 0x7fffe9bcd0e0 AUTO SGA: Receiver of memory is shared pool, size=83, state=0, flg=1 AUTO SGA: Donor of memory is DEFAULT buffer cache, size=35, state=0, flg=1 AUTO SGA: Memory requested=4120, remaining=0 AUTO SGA: Memory received=14934016, minreq=4120, gransz=16777216 AUTO SGA: Request 0x7fffe9bcd0e0 status is COMPLETE /* ????partial transfer?? */ ?????partial transfer??????DUMP_TRANSFER_OPS????0x8c000000 partial granule???????,?: SQL> oradebug setmypid; Statement processed. SQL> oradebug dump DUMP_TRANSFER_OPS 1; Statement processed. SQL> oradebug tracefile_name; /s01/admin/G10R2/udump/g10r2_ora_21482.trc =======================trace content============================== GRANULE SIZE is 16777216 COMPONENT NAME : shared pool Number of granules in partially inuse list (listid 4) is 23 Granule addr is 0x8c000000 Granule owner is DEFAULT buffer cache /* ?0x8c000000 granule?shared pool?partially inuse list, ?????owner??default buffer cache */ Granule 0x8c000000 dump from owner perspective gptr = 0x8c000000, num buf hdrs = 1989, num buffers = 156, ghdr = 0x8cffe000 / * ?????granule?granule header????0x8cffe000, ????156?buffer block,1989?buffer header */ /* ??granule??????,??????buffer cache??shared pool chunk */ BH:0x8cf76018 BA:(nil) st:11 flg:20000 BH:0x8cf76128 BA:(nil) st:11 flg:20000 BH:0x8cf76238 BA:(nil) st:11 flg:20000 BH:0x8cf76348 BA:(nil) st:11 flg:20000 BH:0x8cf76458 BA:(nil) st:11 flg:20000 BH:0x8cf76568 BA:(nil) st:11 flg:20000 BH:0x8cf76678 BA:(nil) st:11 flg:20000 BH:0x8cf76788 BA:(nil) st:11 flg:20000 BH:0x8cf76898 BA:(nil) st:11 flg:20000 BH:0x8cf769a8 BA:(nil) st:11 flg:20000 BH:0x8cf76ab8 BA:(nil) st:11 flg:20000 BH:0x8cf76bc8 BA:(nil) st:11 flg:20000 BH:0x8cf76cd8 BA:0x8c018000 st:1 flg:622202 ............... Address 0x8cf30000 to 0x8cf74000 not in cache Address 0x8cf74000 to 0x8d000000 in cache Granule 0x8c000000 dump from receivers perspective Dumping layout Address 0x8c000000 to 0x8c018000 in sga heap(1,3) (idx=1, dur=4) Address 0x8c018000 to 0x8c01a000 not in this pool Address 0x8c01a000 to 0x8c020000 in sga heap(1,3) (idx=1, dur=4) Address 0x8c020000 to 0x8c022000 not in this pool Address 0x8c022000 to 0x8c032000 in sga heap(1,3) (idx=1, dur=4) Address 0x8c032000 to 0x8c034000 not in this pool Address 0x8c034000 to 0x8c054000 in sga heap(1,3) (idx=1, dur=4) Address 0x8c054000 to 0x8c056000 not in this pool Address 0x8c056000 to 0x8c09c000 in sga heap(1,3) (idx=1, dur=4) Address 0x8c09c000 to 0x8c09e000 not in this pool Address 0x8c09e000 to 0x8c0b6000 in sga heap(1,3) (idx=1, dur=4) Address 0x8c0b6000 to 0x8c0b8000 not in this pool Address 0x8c0b8000 to 0x8c0d2000 in sga heap(1,3) (idx=1, dur=4) ???????granule?????shared granule??????,?????????buffer block,????1?shared subpool??????durtaion?4?chunk,duration=4?execution duration;??duration?chunk???????????,??extent???quiesce list??????????????free?execution duration?????????????,??????duration???extent(??????extent????granule)??????? ?????????????ASMM?????????,????: V$SGAINFODisplays summary information about the system global area (SGA). V$SGADisplays size information about the SGA, including the sizes of different SGA components, the granule size, and free memory. V$SGASTATDisplays detailed information about the SGA. V$SGA_DYNAMIC_COMPONENTSDisplays information about the dynamic SGA components. This view summarizes information based on all completed SGA resize operations since instance startup. V$SGA_DYNAMIC_FREE_MEMORYDisplays information about the amount of SGA memory available for future dynamic SGA resize operations. V$SGA_RESIZE_OPSDisplays information about the last 400 completed SGA resize operations. V$SGA_CURRENT_RESIZE_OPSDisplays information about SGA resize operations that are currently in progress. A resize operation is an enlargement or reduction of a dynamic SGA component. V$SGA_TARGET_ADVICEDisplays information that helps you tune SGA_TARGET. ?????????shared pool duration???,?????????

    Read the article

  • ??ORACLE(?):PMON Release Lock

    - by Liu Maclean(???)
    ?????Oracle????????????PMON???????,??????ORACLE PROCESS,??cleanup dead process????release enqueue lock ,???cleanup latch? ????????????????, ????????????Pmon cleanup dead process?release lock??????????? ??Oracle=> MicroOracle, Maclean???????????Oracle behavior: SQL> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE    11.2.0.3.0      Production TNS for Linux: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com SQL> select pid,program  from v$process;        PID PROGRAM ---------- ------------------------------------------------          1 PSEUDO          2 [email protected] (PMON)          3 [email protected] (PSP0)          4 [email protected] (VKTM)          5 [email protected] (GEN0)          6 [email protected] (DIAG)          7 [email protected] (DBRM)          8 [email protected] (PING)          9 [email protected] (ACMS)         10 [email protected] (DIA0)         11 [email protected] (LMON)         12 [email protected] (LMD0)         13 [email protected] (LMS0)         14 [email protected] (RMS0)         15 [email protected] (LMHB)         16 [email protected] (MMAN)         17 [email protected] (DBW0)         18 [email protected] (LGWR)         19 [email protected] (CKPT)         20 [email protected] (SMON)         21 [email protected] (RECO)         22 [email protected] (RBAL)         23 [email protected] (ASMB)         24 [email protected] (MMON)         25 [email protected] (MMNL)         26 [email protected] (MARK)         27 [email protected] (D000)         28 [email protected] (SMCO)         29 [email protected] (S000)         30 [email protected] (LCK0)         31 [email protected] (RSMN)         32 [email protected] (TNS V1-V3)         33 [email protected] (W000)         34 [email protected] (TNS V1-V3)         35 [email protected] (TNS V1-V3)         37 [email protected] (ARC0)         38 [email protected] (ARC1)         40 [email protected] (ARC2)         41 [email protected] (ARC3)         43 [email protected] (GTX0)         44 [email protected] (RCBG)         46 [email protected] (QMNC)         47 [email protected] (TNS V1-V3)         48 [email protected] (TNS V1-V3)         49 [email protected] (Q000)         50 [email protected] (Q001)         51 [email protected] (GCR0) SQL> drop table maclean; Table dropped. SQL> create table maclean(t1 int); Table created. SQL> insert into maclean values(1); 1 row created. SQL> commit; Commit complete. ?????????, ?????????:PID=2  PMONPID=11 LMONPID=18 LGWRPID=20 SMONPID=12 LMD ??????2???”enq: TX – row lock contention”?????,???KILL??????,??????PMON?recover dead process?release TX lock: PROCESS A: QL> select addr,spid,pid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)); ADDR             SPID                            PID ---------------- ------------------------ ---------- 00000000BD516B80 17880                            46 SQL> select distinct sid from v$mystat;        SID ----------         22 SQL> update maclean set t1=t1+1; 1 row updated. PROCESS B SQL> select addr,spid,pid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)); ADDR             SPID                            PID ---------------- ------------------------ ---------- 00000000BD515AD0 17908                            45 SQL> update maclean set t1=t1+1; HANG.............. PROCESS B ??"enq: TX – row lock contention"?HANG? ????PROCESS C?? ?SMON?10500 event trace ??PMON?KST TRACE: SQL> set linesize 200 pagesize 1400 SQL> select * from v$lock where sid=22; ADDR             KADDR                   SID TY        ID1        ID2      LMODE    REQUEST      CTIME      BLOCK ---------------- ---------------- ---------- -- ---------- ---------- ---------- ---------- ---------- ---------- 00000000BDCD7618 00000000BDCD7670         22 AE        100          0          4          0         48          2 00007F63268A9E28 00007F63268A9E88         22 TM      77902          0          3          0         32          2 00000000B9BB4950 00000000B9BB49C8         22 TX     458765        892          6          0         32          1 PROCESS A holde?ENQUEUE LOCK??? AE?TM?TX SQL> alter system switch logfile; System altered. SQL> alter system checkpoint; System altered. SQL> alter system flush buffer_cache; System altered. SQL> alter system set "_trace_events"='10000-10999:255:2,20,33'; System altered. SQL> ! kill -9 17880 KILL PROCESS A ???PROCESS B??update ?PMON ? PROCESS B ?errorstack ?KST TRACE????? SQL> oradebug setorapid 2; Oracle pid: 2, Unix process pid: 17533, image: [email protected] (PMON) SQL> oradebug dump errorstack 4; Statement processed. SQL> oradebug tracefile_name /s01/orabase/diag/rdbms/vprod/VPROD1/trace/VPROD1_pmon_17533.trc SQL> oradebug setorapid 45; Oracle pid: 45, Unix process pid: 17908, image: [email protected] (TNS V1-V3) SQL> oradebug dump errorstack 4; Statement processed. SQL>oradebug tracefile_name /s01/orabase/diag/rdbms/vprod/VPROD1/trace/VPROD1_ora_17908.trc ??PMON? KST TRACE: 2012-05-18 10:37:34.557225 :8001ECE8:db_trace:ktur.c@5692:ktugru(): [10444:2:1] next rollback uba: 0x00000000.0000.00 2012-05-18 10:37:34.557382 :8001ECE9:db_trace:ksl2.c@16009:ksl_update_post_stats(): [10005:2:1] KSL POST SENT postee=18 num=4 loc='ksa2.h LINE:285 ID:ksasnd' id1=0 id2=0 name=   type=0 2012-05-18 10:37:34.557514 :8001ECEA:db_trace:ksq.c@8540:ksqrcli(): [10704:2:1] ksqrcl: release TX-0007000d-0000037c mode=X 2012-05-18 10:37:34.558819 :8001ECF0:db_trace:ksl2.c@16009:ksl_update_post_stats(): [10005:2:1] KSL POST SENT postee=45 num=5 loc='kji.h LINE:3418 ID:kjata: wake up enqueue owner' id1=0 id2=0 name=   type=0 2012-05-18 10:37:34.559047 :8001ECF8:db_trace:ksl2.c@16009:ksl_update_post_stats(): [10005:2:1] KSL POST SENT postee=12 num=6 loc='kjm.h LINE:1224 ID:kjmpost: post lmd' id1=0 id2=0 name=   type=0 2012-05-18 10:37:34.559271 :8001ECFC:db_trace:ksq.c@8826:ksqrcli(): [10704:2:1] ksqrcl: SUCCESS 2012-05-18 10:37:34.559291 :8001ECFD:db_trace:ktu.c@8652:ktudnx(): [10813:2:1] ktudnx: dec cnt xid:7.13.892 nax:0 nbx:0 2012-05-18 10:37:34.559301 :8001ECFE:db_trace:ktur.c@3198:ktuabt(): [10444:2:1] ABORT TRANSACTION - xid: 0x0007.00d.0000037c 2012-05-18 10:37:34.559327 :8001ECFF:db_trace:ksq.c@8540:ksqrcli(): [10704:2:1] ksqrcl: release TM-0001304e-00000000 mode=SX 2012-05-18 10:37:34.559365 :8001ED00:db_trace:ksq.c@8826:ksqrcli(): [10704:2:1] ksqrcl: SUCCESS 2012-05-18 10:37:34.559908 :8001ED01:db_trace:ksq.c@8540:ksqrcli(): [10704:2:1] ksqrcl: release AE-00000064-00000000 mode=S 2012-05-18 10:37:34.559982 :8001ED02:db_trace:ksq.c@8826:ksqrcli(): [10704:2:1] ksqrcl: SUCCESS 2012-05-18 10:37:34.560217 :8001ED03:db_trace:ksfd.c@15379:ksfdfods(): [10298:2:1] ksfdfods:fob=0xbab87b48 aiopend=0 2012-05-18 10:37:34.560336 :GSIPC:kjcs.c@4876:kjcsombdi(): GSIPC:SOD: 0xbc79e0c8 action 3 state 0 chunk (nil) regq 0xbc79e108 batq 0xbc79e118 2012-05-18 10:37:34.560357 :GSIPC:kjcs.c@5293:kjcsombdi(): GSIPC:SOD: exit cleanup for 0xbc79e0c8 rc: 1, loc: 0x303 2012-05-18 10:37:34.560375 :8001ED04:db_trace:kss.c@1414:kssdch(): [10809:2:1] kssdch(0xbd516b80 = process, 3) 1 0 exit 2012-05-18 10:37:34.560939 :8001ED06:db_trace:kmm.c@10578:kmmlrl(): [10257:2:1] KMMLRL: Entering: flg(0x0) rflg(0x4) 2012-05-18 10:37:34.561091 :8001ED07:db_trace:kmm.c@10472:kmmlrl_process_events(): [10257:2:1] KMMLRL: Events: succ(3) wait(0) fail(0) 2012-05-18 10:37:34.561100 :8001ED08:db_trace:kmm.c@11279:kmmlrl(): [10257:2:1] KMMLRL: Reg/update: flg(0x0) rflg(0x4) 2012-05-18 10:37:34.563325 :8001ED0B:db_trace:kmm.c@12511:kmmlrl(): [10257:2:1] KMMLRL: Update: ret(0) 2012-05-18 10:37:34.563335 :8001ED0C:db_trace:kmm.c@12768:kmmlrl(): [10257:2:1] KMMLRL: Exiting: flg(0x0) rflg(0x4) 2012-05-18 10:37:34.563354 :8001ED0D:db_trace:ksl2.c@2598:kslwtbctx(): [10005:2:1] KSL WAIT BEG [pmon timer] 300/0x12c 0/0x0 0/0x0 wait_id=78 seq_num=79 snap_id=1 PMON??dead process A??????????TX Lock:ksqrcl: release TX-0007000d-0000037c mode=X ?????Post Process B,??Process B ?acquire?TX lock???????:KSL POST SENT postee=45 num=5 loc=’kji.h LINE:3418 ID:kjata: wake up enqueue owner’ id1=0 id2=0 name=   type=0 Process B???PMON??????????ksl2.c@14563:ksliwat(): [10005:45:151] KSL POST RCVD poster=2 num=5 loc=’kji.h LINE:3418 ID:kjata: wake up enqueue owner’ id1=0 id2=0 name=   type=0 fac#=3 posted=0×3 may_be_posted=1kslwtbctx(): [10005:45:151] KSL WAIT BEG [latch: ges resource hash list] 3162668560/0xbc827e10 91/0x5b 0/0×0 wait_id=14 seq_num=15 snap_id=1kslwtectx(): [10005:45:151] KSL WAIT END [latch: ges resource hash list] 3162668560/0xbc827e10 91/0x5b 0/0×0 wait_id=14 seq_num=15 snap_id=1 ?RAC????POST LMD(lock Manager)??,????????GES??:2012-05-18 10:37:34.559047 :8001ECF8:db_trace:ksl2.c@16009:ksl_update_post_stats(): [10005:2:1] KSL POST SENT postee=12 num=6 loc=’kjm.h LINE:1224 ID:kjmpost: post lmd’ id1=0 id2=0 name=   type=0 ??ksqrcl: release TX????????:ksq.c@8826:ksqrcli(): [10704:2:1] ksqrcl: SUCCESS ??PMON abort Process A???Transaction2012-05-18 10:37:34.559291 :8001ECFD:db_trace:ktu.c@8652:ktudnx(): [10813:2:1] ktudnx: dec cnt xid:7.13.892 nax:0 nbx:02012-05-18 10:37:34.559301 :8001ECFE:db_trace:ktur.c@3198:ktuabt(): [10444:2:1] ABORT TRANSACTION – xid: 0×0007.00d.0000037c ??Process A?????maclean??TM lock:ksq.c@8540:ksqrcli(): [10704:2:1] ksqrcl: release TM-0001304e-00000000 mode=SXksq.c@8826:ksqrcli(): [10704:2:1] ksqrcl: SUCCESS ??Process A?????AE ( Prevent Dropping an edition in use) lock:ksq.c@8540:ksqrcli(): [10704:2:1] ksqrcl: release AE-00000064-00000000 mode=Sksq.c@8826:ksqrcli(): [10704:2:1] ksqrcl: SUCCESS ??cleanup process Akjcs.c@4876:kjcsombdi(): GSIPC:SOD: 0xbc79e0c8 action 3 state 0 chunk (nil) regq 0xbc79e108 batq 0xbc79e118GSIPC:kjcs.c@5293:kjcsombdi(): GSIPC:SOD: exit cleanup for 0xbc79e0c8 rc: 1, loc: 0×303kss.c@1414:kssdch(): [10809:2:1] kssdch(0xbd516b80 = process, 3) 1 0 exit 0xbd516b80??PROCESS A ?paddr ???? kssdch???????? ??process???state object SO KSS: delete children of state obj. PMON ??kmmlrl()????instance goodness??update for session drop deltakmmlrl(): [10257:2:1] KMMLRL: Entering: flg(0×0) rflg(0×4)kmmlrl_process_events(): [10257:2:1] KMMLRL: Events: succ(3) wait(0) fail(0)kmmlrl(): [10257:2:1] KMMLRL: Reg/update: flg(0×0) rflg(0×4)kmmlrl(): [10257:2:1] KMMLRL: Update: ret(0)kmmlrl(): [10257:2:1] KMMLRL: Exiting: flg(0×0) rflg(0×4) ????????PMON???? 3s???”pmon timer”??kslwtbctx(): [10005:2:1] KSL WAIT BEG [pmon timer] 300/0x12c 0/0×0 0/0×0 wait_id=78 seq_num=79 snap_id=1

    Read the article

  • ?11gR2 RAC???ASM DISK Path????

    - by Liu Maclean(???)
    ????T.askmaclean.com???????11gR2?ASM DISK?????,??????: aix 6.1,grid 11.2.0.3+asm11.2.0.3+rac ???????????aix????????mpio,??diskgroup ?????veritas dmp???,?????asm?disk_strings=/dev/vx/rdmp/*,crs/asm??????????????/dev/vx/rdmp/?????,?????????diskgroup??? crs???????:2012-07-13 15:07:29.748: [ GPNP][1286]clsgpnp_profileCallUrlInt: [at clsgpnp.c:2108 clsgpnp_profileCallUrlInt] get-profile call to url “ipc://GPNPD_ggtest1? disco “” [f=0 claimed- host: cname: seq: auth:]2012-07-13 15:07:29.762: [ GPNP][1286]clsgpnp_profileCallUrlInt: [at clsgpnp.c:2236 clsgpnp_profileCallUrlInt] Result: (0) CLSGPNP_OK. Successful get-profile CALL to remote “ipc://GPNPD_ggtest1? disco “”2012-07-13 15:07:29.762: [ CSSD][1286]clssnmReadDiscoveryProfile: voting file discovery string(/dev/vx/rdmp/*)2012-07-13 15:07:29.762: [ CSSD][1286]clssnmvDDiscThread: using discovery string /dev/vx/rdmp/* for initial discovery2012-07-13 15:07:29.762: [ SKGFD][1286]Discovery with str:/dev/vx/rdmp/*: 2012-07-13 15:07:29.762: [ SKGFD][1286]UFS discovery with :/dev/vx/rdmp/*: 2012-07-13 15:07:29.769: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_919: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_212: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_211: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_210: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_209: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_181: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_180: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_3: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_2: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_1: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_0: 2012-07-13 15:07:29.771: [ SKGFD][1286]OSS discovery with :/dev/vx/rdmp/*: 2012-07-13 15:07:29.771: [ SKGFD][1286]Handle 1115e7510 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_916: 2012-07-13 15:07:29.772: [ SKGFD][1286]Handle 1118758b0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_912: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118d9cf0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_908: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118da450 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_904: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118dad70 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_903: 2012-07-13 15:07:29.802: [ CLSF][1286]checksum failed for disk:/dev/vx/rdmp/v_df8000_916:2012-07-13 15:07:29.803: [ SKGFD][1286]Lib :UFS:: closing handle 1115e7510 for disk :/dev/vx/rdmp/v_df8000_916: 2012-07-13 15:07:29.803: [ SKGFD][1286]Lib :UFS:: closing handle 1118758b0 for disk :/dev/vx/rdmp/v_df8000_912: 2012-07-13 15:07:29.804: [ SKGFD][1286]Handle 1115e6710 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_202: 2012-07-13 15:07:29.808: [ SKGFD][1286]Handle 1115e7030 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_201: 2012-07-13 15:07:29.809: [ SKGFD][1286]Handle 1115e7ad0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_200: 2012-07-13 15:07:29.809: [ SKGFD][1286]Handle 1118733f0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_199: 2012-07-13 15:07:29.816: [ CLSF][1286]checksum failed for disk:/dev/vx/rdmp/v_df8000_186:2012-07-13 15:07:29.816: [ SKGFD][1286]Lib :UFS:: closing handle 1118de5d0 for disk :/dev/vx/rdmp/v_df8000_186: 2012-07-13 15:07:29.816: [ CSSD][1286]clssnmvDiskVerify: Successful discovery of 0 disks2012-07-13 15:07:29.816: [ CSSD][1286]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery2012-07-13 15:07:29.816: [ CSSD][1286]clssnmvFindInitialConfigs: No voting files found2012-07-13 15:07:29.816: [ CSSD][1286](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds2012-07-13 15:07:30.169: [ CSSD][1029]clssgmExecuteClientRequest(): type(37) size(80) only connect and exit messages are allowed before lease acquisition proc(1115e4870) client(0) ??????ASM DISK PATH???????,????11gR2 RAC+ASM????,??CRS??????,????crsctl start crs -excl -nocrs???????CSS???ASM??, ???????(clssnmCompleteInitVFDiscovery: Voting file not found),????Voteing file????????????????? ?????????,???????11gR2 RAC+ASM??ASM DISK??: 1.?????????ASM DISK?????,??????UDEV????????,???UDEV????ASM DISK?/dev/asm-disk* ??? /dev/rasm-disk*???, ??????udev rule??????: [grid@maclean1 ~]$ export ORACLE_HOME=/g01/grid/app/11.2.0/grid [grid@maclean1 ~]$ /g01/grid/app/11.2.0/grid/bin/sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Sun Jul 15 04:09:28 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> show parameter diskstri NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ asm_diskstring string /dev/asm* ??????ASM?????asm_diskstring ?/dev/asm*, ???root????UDEV RULE?? : [root@maclean1 rules.d]# cp 99-oracle-asmdevices.rules 99-oracle-asmdevices.rules.bak [root@maclean1 rules.d]# vi 99-oracle-asmdevices.rules [root@maclean1 rules.d]# cat 99-oracle-asmdevices.rules KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB09cadb31-cfbea255_", NAME="rasm-diskb", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB5f097069-59efb82f_", NAME="rasm-diskc", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB4e1a81c0-20478bc4_", NAME="rasm-diskd", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VBdcce9285-b13c5a27_", NAME="rasm-diske", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB82effe1a-dbca7dff_", NAME="rasm-diskf", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB950d279f-c581cb51_", NAME="rasm-diskg", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB14400d81-651672d7_", NAME="rasm-diskh", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB31b1237b-78aa22bb_", NAME="rasm-diski", OWNER="grid", GROUP="asmadmin", MODE="0660" ???????99-oracle-asmdevices.rules?UDEV RULE????,??????????/dev/rasm-disk*???,??????ASM DISK???, ????????????????RAC CRS??????? ??????votedisk?ocr ????: [root@maclean1 rules.d]# /g01/grid/app/11.2.0/grid/bin/crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 6896bfc3d1464f9fbf0ea9df87e023ad (/dev/asm-diskb) [SYSTEMDG] 2. ONLINE 58eb81b656084ff2bfd315d9badd08b7 (/dev/asm-diskc) [SYSTEMDG] 3. ONLINE 6bf7324625c54f3abf2c942b1e7f70d9 (/dev/asm-diskd) [SYSTEMDG] 4. ONLINE 43ad8ae20c354f5ebf7083bc30bf94cc (/dev/asm-diske) [SYSTEMDG] 5. ONLINE 4c225359d51b4f93bfba01080664b3d7 (/dev/asm-diskf) [SYSTEMDG] Located 5 voting disk(s). [root@maclean1 rules.d]# /g01/grid/app/11.2.0/grid/bin/ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2844 Available space (kbytes) : 259276 ID : 879001605 Device/File Name : +SYSTEMDG Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded ??votedisk file?????????ASM DISK,?????????crsctl replace votedisk, ??????LINUX OS: [root@maclean1 rules.d]# init 6 rebooting ............ [root@maclean1 dev]# ls -l *asm* brw-rw---- 1 grid asmadmin 8, 16 Jul 15 04:15 rasm-diskb brw-rw---- 1 grid asmadmin 8, 32 Jul 15 04:15 rasm-diskc brw-rw---- 1 grid asmadmin 8, 48 Jul 15 04:15 rasm-diskd brw-rw---- 1 grid asmadmin 8, 64 Jul 15 04:15 rasm-diske brw-rw---- 1 grid asmadmin 8, 80 Jul 15 04:15 rasm-diskf brw-rw---- 1 grid asmadmin 8, 96 Jul 15 04:15 rasm-diskg brw-rw---- 1 grid asmadmin 8, 112 Jul 15 04:15 rasm-diskh brw-rw---- 1 grid asmadmin 8, 128 Jul 15 04:15 rasm-diski ??????????/dev/rasm-disk*?ASM DISK,??ASM??????css?????/dev/asm*?????ASM DISK,??????????????ASM DISK: more /g01/grid/app/11.2.0/grid/log/maclean1/cssd/ocssd.log 2012-07-15 04:17:45.208: [ SKGFD][1099548992]Discovery with str:/dev/asm*: 2012-07-15 04:17:45.208: [ SKGFD][1099548992]UFS discovery with :/dev/asm*: 2012-07-15 04:17:45.208: [ SKGFD][1099548992]OSS discovery with :/dev/asm*: 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmvDiskVerify: Successful discovery of 0 disks 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmvFindInitialConfigs: No voting files found 2012-07-15 04:17:45.208: [ CSSD][1099548992](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmExecuteClientRequest(): type(37) size(80) only connect and exit messages are allowed before lease acquisition proc(0x26a8ba0) client((nil)) 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmDeadProc: proc 0x26a8ba0 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmDestroyProc: cleaning up proc(0x26a8ba0) con(0xfe6) skgpid ospid 3751 with 0 clients, refcount 0 2012-07-15 04:17:45.252: [ CSSD][1096661312]clssgmDiscEndpcl: gipcDestroy 0xfe6 2012-07-15 04:17:45.829: [ CSSD][1096661312]clssscSelect: cookie accept request 0x2318ea0 2012-07-15 04:17:45.829: [ CSSD][1096661312]clssgmAllocProc: (0x2659480) allocated 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: properties of cmProc 0x2659480 - 1,2,3,4,5 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: Connect from con(0x114e) proc(0x2659480) pid(3751) version 11:2:1:4, properties: 1,2,3,4,5 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: msg flags 0x0000 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssscSelect: cookie accept request 0x253ddd0 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssscevtypSHRCON: getting client with cmproc 0x253ddd0 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmRegisterClient: proc(3/0x253ddd0), client(61/0x26877b0) 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmExecuteClientRequest(): type(6) size(684) only connect and exit messages are  allowed before lease acquisition proc(0x253ddd0) client(0x26877b0) 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmDiscEndpcl: gipcDestroy 0x1174 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssscSelect: cookie accept request 0x26368a0 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssscevtypSHRCON: getting client with cmproc 0x26368a0 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssgmRegisterClient: proc(5/0x26368a0), client(50/0x26877b0) ??11gR2?CRS?????ASM,??ocr???ASM?,??ASM???????,???CRS?????????: [root@maclean1 ~]# crsctl check has CRS-4638: Oracle High Availability Services is online [root@maclean1 ~]# crsctl check crs CRS-4638: Oracle High Availability Services is online CRS-4535: Cannot communicate with Cluster Ready Services CRS-4530: Communications failure contacting Cluster Synchronization Services daemon CRS-4534: Cannot communicate with Event Manager 2. ?????ASM DISK PATH???????,?????????????CRS: ??????OHASD??: [root@maclean1 ~]# crsctl stop has -f CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'maclean1' CRS-2673: Attempting to stop 'ora.mdnsd' on 'maclean1' CRS-2673: Attempting to stop 'ora.crf' on 'maclean1' CRS-2677: Stop of 'ora.mdnsd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.crf' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'maclean1' CRS-2677: Stop of 'ora.gipcd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'maclean1' CRS-2677: Stop of 'ora.gpnpd' on 'maclean1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'maclean1' has completed CRS-4133: Oracle High Availability Services has been stopped. 3. ?-excl -nocrs????CRS,?????ASM ???????CRS??: [root@maclean1 ~]# crsctl start crs -excl -nocrs  CRS-4123: Oracle High Availability Services has been started. CRS-2672: Attempting to start 'ora.mdnsd' on 'maclean1' CRS-2676: Start of 'ora.mdnsd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.gpnpd' on 'maclean1' CRS-2676: Start of 'ora.gpnpd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cssdmonitor' on 'maclean1' CRS-2672: Attempting to start 'ora.gipcd' on 'maclean1' CRS-2676: Start of 'ora.cssdmonitor' on 'maclean1' succeeded CRS-2676: Start of 'ora.gipcd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cssd' on 'maclean1' CRS-2672: Attempting to start 'ora.diskmon' on 'maclean1' CRS-2676: Start of 'ora.diskmon' on 'maclean1' succeeded CRS-2676: Start of 'ora.cssd' on 'maclean1' succeeded CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2672: Attempting to start 'ora.ctssd' on 'maclean1' CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2676: Start of 'ora.ctssd' on 'maclean1' succeeded CRS-2676: Start of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.asm' on 'maclean1' CRS-2676: Start of 'ora.asm' on 'maclean1' succeeded #??????CRS_HOME???ORACLE_BASE?777??,??????? [root@maclean1 ~]# chmod 777 /g01 4.??ASM???disk_strings????ASM DISK PATH??: [root@maclean1 ~]# su - grid [grid@maclean1 ~]$ sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Sun Jul 15 04:40:40 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> alter system set asm_diskstring='/dev/rasm*'; System altered. SQL> alter diskgroup systemdg mount; Diskgroup altered. SQL> create spfile from memory; File created. SQL> startup force mount; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string /g01/grid/app/11.2.0/grid/dbs/ spfile+ASM1.ora SQL> show parameter disk NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ asm_diskgroups string SYSTEMDG asm_diskstring string /dev/rasm* SQL> create pfile from spfile; File created. SQL> create spfile='+SYSTEMDG' from pfile; File created. SQL> startup force; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string +SYSTEMDG/maclean-cluster/asmp arameterfile/registry.253.7886 82933 ???????asm_diskstring ,????ASM DISKGROUP??SPFILE , ??ASM?????SPFILE?????????????????? 5. crsctl replace votedisk ???votedisk????: [root@maclean1 ~]# crsctl replace votedisk +systemdg Successful addition of voting disk 864a00efcfbe4f42bfd0f4f6b60472a0. Successful addition of voting disk ab14d6e727614f29bf53b9870052a5c8. Successful addition of voting disk 754c03c168854f46bf2daee7287bf260. Successful addition of voting disk 9ed58f37f3e84f28bfcd9b101f2af9f3. Successful addition of voting disk 4ce7b7c682364f12bf4df5ce1fb7814e. Successfully replaced voting disk group with +systemdg. CRS-4266: Voting file(s) successfully replaced [root@maclean1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 864a00efcfbe4f42bfd0f4f6b60472a0 (/dev/rasm-diskb) [SYSTEMDG] 2. ONLINE ab14d6e727614f29bf53b9870052a5c8 (/dev/rasm-diskc) [SYSTEMDG] 3. ONLINE 754c03c168854f46bf2daee7287bf260 (/dev/rasm-diskd) [SYSTEMDG] 4. ONLINE 9ed58f37f3e84f28bfcd9b101f2af9f3 (/dev/rasm-diske) [SYSTEMDG] 5. ONLINE 4ce7b7c682364f12bf4df5ce1fb7814e (/dev/rasm-diskf) [SYSTEMDG] Located 5 voting disk(s). [root@maclean1 ~]# ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2844 Available space (kbytes) : 259276 ID : 879001605 Device/File Name : +SYSTEMDG Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded ??replace?votedisk??? ASM DISK?,???votedisk?OCR??????? 6.??CRS??: [root@maclean1 ~]# crsctl stop crs CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'maclean1' CRS-2673: Attempting to stop 'ora.mdnsd' on 'maclean1' CRS-2673: Attempting to stop 'ora.ctssd' on 'maclean1' CRS-2673: Attempting to stop 'ora.asm' on 'maclean1' CRS-2677: Stop of 'ora.mdnsd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.asm' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2677: Stop of 'ora.ctssd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.cssd' on 'maclean1' CRS-2677: Stop of 'ora.cssd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'maclean1' CRS-2677: Stop of 'ora.gipcd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'maclean1' CRS-2677: Stop of 'ora.gpnpd' on 'maclean1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'maclean1' has completed CRS-4133: Oracle High Availability Services has been stopped. [root@maclean1 ~]# crsctl stat res -t -------------------------------------------------------------------------------- NAME TARGET STATE SERVER STATE_DETAILS -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.BACKUPDG.dg ONLINE ONLINE maclean1 ora.DATA.dg ONLINE ONLINE maclean1 ora.LISTENER.lsnr ONLINE ONLINE maclean1 ora.SYSTEMDG.dg ONLINE ONLINE maclean1 ora.asm ONLINE ONLINE maclean1 Started ora.gsd OFFLINE OFFLINE maclean1 ora.net1.network ONLINE ONLINE maclean1 ora.ons ONLINE ONLINE maclean1 -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.LISTENER_SCAN1.lsnr 1 ONLINE ONLINE maclean1 ora.cvu 1 ONLINE ONLINE maclean1 ora.maclean1.vip 1 ONLINE ONLINE maclean1 ora.maclean2.vip 1 ONLINE INTERMEDIATE maclean1 FAILED OVER ora.oc4j 1 ONLINE OFFLINE STARTING ora.prod.db 1 ONLINE OFFLINE Instance Shutdown,S TARTING 2 ONLINE OFFLINE ora.scan1.vip 1 ONLINE ONLINE maclean1 ???????ASM?????SPFILE,???????????????,?????CRS??????? ??11gR2 RAC+ASM?????????,????????????????ASM DISK PATH?????????, ???????????????,????!

    Read the article

  • ?11gR2 RAC???ASM DISK Path????

    - by Liu Maclean(???)
    ????T.askmaclean.com???????11gR2?ASM DISK?????,??????: aix 6.1,grid 11.2.0.3+asm11.2.0.3+rac ???????????aix????????mpio,??diskgroup ?????veritas dmp???,?????asm?disk_strings=/dev/vx/rdmp/*,crs/asm??????????????/dev/vx/rdmp/?????,?????????diskgroup??? crs???????:2012-07-13 15:07:29.748: [ GPNP][1286]clsgpnp_profileCallUrlInt: [at clsgpnp.c:2108 clsgpnp_profileCallUrlInt] get-profile call to url “ipc://GPNPD_ggtest1? disco “” [f=0 claimed- host: cname: seq: auth:]2012-07-13 15:07:29.762: [ GPNP][1286]clsgpnp_profileCallUrlInt: [at clsgpnp.c:2236 clsgpnp_profileCallUrlInt] Result: (0) CLSGPNP_OK. Successful get-profile CALL to remote “ipc://GPNPD_ggtest1? disco “”2012-07-13 15:07:29.762: [ CSSD][1286]clssnmReadDiscoveryProfile: voting file discovery string(/dev/vx/rdmp/*)2012-07-13 15:07:29.762: [ CSSD][1286]clssnmvDDiscThread: using discovery string /dev/vx/rdmp/* for initial discovery2012-07-13 15:07:29.762: [ SKGFD][1286]Discovery with str:/dev/vx/rdmp/*: 2012-07-13 15:07:29.762: [ SKGFD][1286]UFS discovery with :/dev/vx/rdmp/*: 2012-07-13 15:07:29.769: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_919: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_212: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_211: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_210: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_209: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_181: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_180: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_3: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_2: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_1: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_0: 2012-07-13 15:07:29.771: [ SKGFD][1286]OSS discovery with :/dev/vx/rdmp/*: 2012-07-13 15:07:29.771: [ SKGFD][1286]Handle 1115e7510 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_916: 2012-07-13 15:07:29.772: [ SKGFD][1286]Handle 1118758b0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_912: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118d9cf0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_908: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118da450 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_904: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118dad70 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_903: 2012-07-13 15:07:29.802: [ CLSF][1286]checksum failed for disk:/dev/vx/rdmp/v_df8000_916:2012-07-13 15:07:29.803: [ SKGFD][1286]Lib :UFS:: closing handle 1115e7510 for disk :/dev/vx/rdmp/v_df8000_916: 2012-07-13 15:07:29.803: [ SKGFD][1286]Lib :UFS:: closing handle 1118758b0 for disk :/dev/vx/rdmp/v_df8000_912: 2012-07-13 15:07:29.804: [ SKGFD][1286]Handle 1115e6710 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_202: 2012-07-13 15:07:29.808: [ SKGFD][1286]Handle 1115e7030 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_201: 2012-07-13 15:07:29.809: [ SKGFD][1286]Handle 1115e7ad0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_200: 2012-07-13 15:07:29.809: [ SKGFD][1286]Handle 1118733f0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_199: 2012-07-13 15:07:29.816: [ CLSF][1286]checksum failed for disk:/dev/vx/rdmp/v_df8000_186:2012-07-13 15:07:29.816: [ SKGFD][1286]Lib :UFS:: closing handle 1118de5d0 for disk :/dev/vx/rdmp/v_df8000_186: 2012-07-13 15:07:29.816: [ CSSD][1286]clssnmvDiskVerify: Successful discovery of 0 disks2012-07-13 15:07:29.816: [ CSSD][1286]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery2012-07-13 15:07:29.816: [ CSSD][1286]clssnmvFindInitialConfigs: No voting files found2012-07-13 15:07:29.816: [ CSSD][1286](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds2012-07-13 15:07:30.169: [ CSSD][1029]clssgmExecuteClientRequest(): type(37) size(80) only connect and exit messages are allowed before lease acquisition proc(1115e4870) client(0) ??????ASM DISK PATH???????,????11gR2 RAC+ASM????,??CRS??????,????crsctl start crs -excl -nocrs???????CSS???ASM??, ???????(clssnmCompleteInitVFDiscovery: Voting file not found),????Voteing file????????????????? ?????????,???????11gR2 RAC+ASM??ASM DISK??: 1.?????????ASM DISK?????,??????UDEV????????,???UDEV????ASM DISK?/dev/asm-disk* ??? /dev/rasm-disk*???, ??????udev rule??????: [grid@maclean1 ~]$ export ORACLE_HOME=/g01/grid/app/11.2.0/grid [grid@maclean1 ~]$ /g01/grid/app/11.2.0/grid/bin/sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Sun Jul 15 04:09:28 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> show parameter diskstri NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ asm_diskstring string /dev/asm* ??????ASM?????asm_diskstring ?/dev/asm*, ???root????UDEV RULE?? : [root@maclean1 rules.d]# cp 99-oracle-asmdevices.rules 99-oracle-asmdevices.rules.bak [root@maclean1 rules.d]# vi 99-oracle-asmdevices.rules [root@maclean1 rules.d]# cat 99-oracle-asmdevices.rules KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB09cadb31-cfbea255_", NAME="rasm-diskb", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB5f097069-59efb82f_", NAME="rasm-diskc", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB4e1a81c0-20478bc4_", NAME="rasm-diskd", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VBdcce9285-b13c5a27_", NAME="rasm-diske", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB82effe1a-dbca7dff_", NAME="rasm-diskf", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB950d279f-c581cb51_", NAME="rasm-diskg", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB14400d81-651672d7_", NAME="rasm-diskh", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB31b1237b-78aa22bb_", NAME="rasm-diski", OWNER="grid", GROUP="asmadmin", MODE="0660" ???????99-oracle-asmdevices.rules?UDEV RULE????,??????????/dev/rasm-disk*???,??????ASM DISK???, ????????????????RAC CRS??????? ??????votedisk?ocr ????: [root@maclean1 rules.d]# /g01/grid/app/11.2.0/grid/bin/crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 6896bfc3d1464f9fbf0ea9df87e023ad (/dev/asm-diskb) [SYSTEMDG] 2. ONLINE 58eb81b656084ff2bfd315d9badd08b7 (/dev/asm-diskc) [SYSTEMDG] 3. ONLINE 6bf7324625c54f3abf2c942b1e7f70d9 (/dev/asm-diskd) [SYSTEMDG] 4. ONLINE 43ad8ae20c354f5ebf7083bc30bf94cc (/dev/asm-diske) [SYSTEMDG] 5. ONLINE 4c225359d51b4f93bfba01080664b3d7 (/dev/asm-diskf) [SYSTEMDG] Located 5 voting disk(s). [root@maclean1 rules.d]# /g01/grid/app/11.2.0/grid/bin/ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2844 Available space (kbytes) : 259276 ID : 879001605 Device/File Name : +SYSTEMDG Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded ??votedisk file?????????ASM DISK,?????????crsctl replace votedisk, ??????LINUX OS: [root@maclean1 rules.d]# init 6 rebooting ............ [root@maclean1 dev]# ls -l *asm* brw-rw---- 1 grid asmadmin 8, 16 Jul 15 04:15 rasm-diskb brw-rw---- 1 grid asmadmin 8, 32 Jul 15 04:15 rasm-diskc brw-rw---- 1 grid asmadmin 8, 48 Jul 15 04:15 rasm-diskd brw-rw---- 1 grid asmadmin 8, 64 Jul 15 04:15 rasm-diske brw-rw---- 1 grid asmadmin 8, 80 Jul 15 04:15 rasm-diskf brw-rw---- 1 grid asmadmin 8, 96 Jul 15 04:15 rasm-diskg brw-rw---- 1 grid asmadmin 8, 112 Jul 15 04:15 rasm-diskh brw-rw---- 1 grid asmadmin 8, 128 Jul 15 04:15 rasm-diski ??????????/dev/rasm-disk*?ASM DISK,??ASM??????css?????/dev/asm*?????ASM DISK,??????????????ASM DISK: more /g01/grid/app/11.2.0/grid/log/maclean1/cssd/ocssd.log 2012-07-15 04:17:45.208: [ SKGFD][1099548992]Discovery with str:/dev/asm*: 2012-07-15 04:17:45.208: [ SKGFD][1099548992]UFS discovery with :/dev/asm*: 2012-07-15 04:17:45.208: [ SKGFD][1099548992]OSS discovery with :/dev/asm*: 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmvDiskVerify: Successful discovery of 0 disks 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmvFindInitialConfigs: No voting files found 2012-07-15 04:17:45.208: [ CSSD][1099548992](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmExecuteClientRequest(): type(37) size(80) only connect and exit messages are allowed before lease acquisition proc(0x26a8ba0) client((nil)) 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmDeadProc: proc 0x26a8ba0 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmDestroyProc: cleaning up proc(0x26a8ba0) con(0xfe6) skgpid ospid 3751 with 0 clients, refcount 0 2012-07-15 04:17:45.252: [ CSSD][1096661312]clssgmDiscEndpcl: gipcDestroy 0xfe6 2012-07-15 04:17:45.829: [ CSSD][1096661312]clssscSelect: cookie accept request 0x2318ea0 2012-07-15 04:17:45.829: [ CSSD][1096661312]clssgmAllocProc: (0x2659480) allocated 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: properties of cmProc 0x2659480 - 1,2,3,4,5 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: Connect from con(0x114e) proc(0x2659480) pid(3751) version 11:2:1:4, properties: 1,2,3,4,5 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: msg flags 0x0000 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssscSelect: cookie accept request 0x253ddd0 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssscevtypSHRCON: getting client with cmproc 0x253ddd0 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmRegisterClient: proc(3/0x253ddd0), client(61/0x26877b0) 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmExecuteClientRequest(): type(6) size(684) only connect and exit messages are  allowed before lease acquisition proc(0x253ddd0) client(0x26877b0) 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmDiscEndpcl: gipcDestroy 0x1174 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssscSelect: cookie accept request 0x26368a0 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssscevtypSHRCON: getting client with cmproc 0x26368a0 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssgmRegisterClient: proc(5/0x26368a0), client(50/0x26877b0) ??11gR2?CRS?????ASM,??ocr???ASM?,??ASM???????,???CRS?????????: [root@maclean1 ~]# crsctl check has CRS-4638: Oracle High Availability Services is online [root@maclean1 ~]# crsctl check crs CRS-4638: Oracle High Availability Services is online CRS-4535: Cannot communicate with Cluster Ready Services CRS-4530: Communications failure contacting Cluster Synchronization Services daemon CRS-4534: Cannot communicate with Event Manager 2. ?????ASM DISK PATH???????,?????????????CRS: ??????OHASD??: [root@maclean1 ~]# crsctl stop has -f CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'maclean1' CRS-2673: Attempting to stop 'ora.mdnsd' on 'maclean1' CRS-2673: Attempting to stop 'ora.crf' on 'maclean1' CRS-2677: Stop of 'ora.mdnsd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.crf' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'maclean1' CRS-2677: Stop of 'ora.gipcd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'maclean1' CRS-2677: Stop of 'ora.gpnpd' on 'maclean1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'maclean1' has completed CRS-4133: Oracle High Availability Services has been stopped. 3. ?-excl -nocrs????CRS,?????ASM ???????CRS??: [root@maclean1 ~]# crsctl start crs -excl -nocrs  CRS-4123: Oracle High Availability Services has been started. CRS-2672: Attempting to start 'ora.mdnsd' on 'maclean1' CRS-2676: Start of 'ora.mdnsd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.gpnpd' on 'maclean1' CRS-2676: Start of 'ora.gpnpd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cssdmonitor' on 'maclean1' CRS-2672: Attempting to start 'ora.gipcd' on 'maclean1' CRS-2676: Start of 'ora.cssdmonitor' on 'maclean1' succeeded CRS-2676: Start of 'ora.gipcd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cssd' on 'maclean1' CRS-2672: Attempting to start 'ora.diskmon' on 'maclean1' CRS-2676: Start of 'ora.diskmon' on 'maclean1' succeeded CRS-2676: Start of 'ora.cssd' on 'maclean1' succeeded CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2672: Attempting to start 'ora.ctssd' on 'maclean1' CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2676: Start of 'ora.ctssd' on 'maclean1' succeeded CRS-2676: Start of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.asm' on 'maclean1' CRS-2676: Start of 'ora.asm' on 'maclean1' succeeded #??????CRS_HOME???ORACLE_BASE?777??,??????? [root@maclean1 ~]# chmod 777 /g01 4.??ASM???disk_strings????ASM DISK PATH??: [root@maclean1 ~]# su - grid [grid@maclean1 ~]$ sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Sun Jul 15 04:40:40 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> alter system set asm_diskstring='/dev/rasm*'; System altered. SQL> alter diskgroup systemdg mount; Diskgroup altered. SQL> create spfile from memory; File created. SQL> startup force mount; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string /g01/grid/app/11.2.0/grid/dbs/ spfile+ASM1.ora SQL> show parameter disk NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ asm_diskgroups string SYSTEMDG asm_diskstring string /dev/rasm* SQL> create pfile from spfile; File created. SQL> create spfile='+SYSTEMDG' from pfile; File created. SQL> startup force; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string +SYSTEMDG/maclean-cluster/asmp arameterfile/registry.253.7886 82933 ???????asm_diskstring ,????ASM DISKGROUP??SPFILE , ??ASM?????SPFILE?????????????????? 5. crsctl replace votedisk ???votedisk????: [root@maclean1 ~]# crsctl replace votedisk +systemdg Successful addition of voting disk 864a00efcfbe4f42bfd0f4f6b60472a0. Successful addition of voting disk ab14d6e727614f29bf53b9870052a5c8. Successful addition of voting disk 754c03c168854f46bf2daee7287bf260. Successful addition of voting disk 9ed58f37f3e84f28bfcd9b101f2af9f3. Successful addition of voting disk 4ce7b7c682364f12bf4df5ce1fb7814e. Successfully replaced voting disk group with +systemdg. CRS-4266: Voting file(s) successfully replaced [root@maclean1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 864a00efcfbe4f42bfd0f4f6b60472a0 (/dev/rasm-diskb) [SYSTEMDG] 2. ONLINE ab14d6e727614f29bf53b9870052a5c8 (/dev/rasm-diskc) [SYSTEMDG] 3. ONLINE 754c03c168854f46bf2daee7287bf260 (/dev/rasm-diskd) [SYSTEMDG] 4. ONLINE 9ed58f37f3e84f28bfcd9b101f2af9f3 (/dev/rasm-diske) [SYSTEMDG] 5. ONLINE 4ce7b7c682364f12bf4df5ce1fb7814e (/dev/rasm-diskf) [SYSTEMDG] Located 5 voting disk(s). [root@maclean1 ~]# ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2844 Available space (kbytes) : 259276 ID : 879001605 Device/File Name : +SYSTEMDG Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded ??replace?votedisk??? ASM DISK?,???votedisk?OCR??????? 6.??CRS??: [root@maclean1 ~]# crsctl stop crs CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'maclean1' CRS-2673: Attempting to stop 'ora.mdnsd' on 'maclean1' CRS-2673: Attempting to stop 'ora.ctssd' on 'maclean1' CRS-2673: Attempting to stop 'ora.asm' on 'maclean1' CRS-2677: Stop of 'ora.mdnsd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.asm' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2677: Stop of 'ora.ctssd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.cssd' on 'maclean1' CRS-2677: Stop of 'ora.cssd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'maclean1' CRS-2677: Stop of 'ora.gipcd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'maclean1' CRS-2677: Stop of 'ora.gpnpd' on 'maclean1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'maclean1' has completed CRS-4133: Oracle High Availability Services has been stopped. [root@maclean1 ~]# crsctl stat res -t -------------------------------------------------------------------------------- NAME TARGET STATE SERVER STATE_DETAILS -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.BACKUPDG.dg ONLINE ONLINE maclean1 ora.DATA.dg ONLINE ONLINE maclean1 ora.LISTENER.lsnr ONLINE ONLINE maclean1 ora.SYSTEMDG.dg ONLINE ONLINE maclean1 ora.asm ONLINE ONLINE maclean1 Started ora.gsd OFFLINE OFFLINE maclean1 ora.net1.network ONLINE ONLINE maclean1 ora.ons ONLINE ONLINE maclean1 -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.LISTENER_SCAN1.lsnr 1 ONLINE ONLINE maclean1 ora.cvu 1 ONLINE ONLINE maclean1 ora.maclean1.vip 1 ONLINE ONLINE maclean1 ora.maclean2.vip 1 ONLINE INTERMEDIATE maclean1 FAILED OVER ora.oc4j 1 ONLINE OFFLINE STARTING ora.prod.db 1 ONLINE OFFLINE Instance Shutdown,S TARTING 2 ONLINE OFFLINE ora.scan1.vip 1 ONLINE ONLINE maclean1 ???????ASM?????SPFILE,???????????????,?????CRS??????? ??11gR2 RAC+ASM?????????,????????????????ASM DISK PATH??????????

    Read the article

  • FreeBSD performance tuning. Sysctls, loader.conf, kernel.

    - by SaveTheRbtz
    I wanted to share knowledge of tuning FreeBSD via sysctls, so i'm posting them with comments. Based on Igor Sysoev (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Sysctls are for 7.x FreeBSD. Since 7.2 amd64 some of them are tuned well by default. Prior 7.0 some of them are boot only (set via /boot/loader.conf) or does not exist at all. Highload web server sysctls: # Max. backlog size kern.ipc.somaxconn=4096 # Shared memory // 7.2+ can use shared memory > 2Gb kern.ipc.shmmax=2147483648 # Sockets kern.ipc.maxsockets=204800 # Do not use lager sockbufs on 8.0 # ( http://old.nabble.com/Significant-performance-regression-for-increased-maxsockbuf-on-8.0-RELEASE-tt26745981.html#a26745981 ) kern.ipc.maxsockbuf=262144 # Recive clusters (on amd64 7.2+ 65k is default) # For such high value vm.kmem_size must be increased to 3G #kern.ipc.nmbclusters=229376 # Jumbo pagesize(4k/8k) clusters # Used as general packet storage for jumbo frames # can be monitored via `netstat -m` #kern.ipc.nmbjumbop=192000 # Jumbo 9k/16k clusters # If you are using them #kern.ipc.nmbjumbo9=24000 #kern.ipc.nmbjumbo16=10240 # Every socket is a file, so increase them kern.maxfiles=204800 kern.maxfilesperproc=200000 kern.maxvnodes=200000 # Turn off receive autotuning #net.inet.tcp.recvbuf_auto=0 # Small receive space, only usable on http-server, on file server this # should be increased to 65535 or even more #net.inet.tcp.recvspace=8192 # Small send space is useful for http servers that serve small files # Autotuned since 7.x net.inet.tcp.sendspace=16384 # This should be enabled if you going to use big spaces (>64k) #net.inet.tcp.rfc1323=1 # Turn this off on highspeed, lossless connections (LAN 1Gbit+) #net.inet.tcp.delayed_ack=0 # This feature is useful if you are serving data over modems, Gigabit Ethernet, # or even high speed WAN links (or any other link with a high bandwidth delay product), # especially if you are also using window scaling or have configured a large send window. # You can try setting it to 0 on fileserver with 1GBit+ interfaces # Automatically disables on small RTT ( http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_subr.c?#rev1.237 ) #net.inet.tcp.inflight.enable=0 # Disable randomizing of ports to avoid false RST # Before usage check SA here www.bsdcan.org/2006/papers/ImprovingTCPIP.pdf # (it's also says that port randomization auto-disables at some conn.rates, but I didn't tested it thou) #net.inet.ip.portrange.randomized=0 # Increase portrange # For outgoing connections only. Good for seed-boxes and ftp servers. net.inet.ip.portrange.first=1024 net.inet.ip.portrange.last=65535 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Increases default TTL, sometimes useful # Default is 64 net.inet.ip.ttl=128 # Lessen max segment life to conserve resources # ACK waiting time in miliseconds (default: 30000 from RFC) net.inet.tcp.msl=5000 # Max bumber of timewait sockets net.inet.tcp.maxtcptw=40960 # Don't use tw on local connections # As of 15 Apr 2009. Igor Sysoev says that nolocaltimewait has some buggy realization. # So disable it or now till get fixed #net.inet.tcp.nolocaltimewait=1 # FIN_WAIT_2 state fast recycle net.inet.tcp.fast_finwait2_recycle=1 # Time before tcp keepalive probe is sent # default is 2 hours (7200000) #net.inet.tcp.keepidle=60000 # Should be increased until net.inet.ip.intr_queue_drops is zero net.inet.ip.intr_queue_maxlen=4096 # Interrupt handling via multiple CPU, but with context switch. # You can play with it. Default is 1; #net.isr.direct=0 # This is for routers only #net.inet.ip.forwarding=1 #net.inet.ip.fastforwarding=1 # This speed ups dummynet when channel isn't saturated net.inet.ip.dummynet.io_fast=1 # Increase dummynet(4) hash #net.inet.ip.dummynet.hash_size=2048 #net.inet.ip.dummynet.max_chain_len # Should be increased when you have A LOT of files on server # (Increase until vfs.ufs.dirhash_mem becames lower) vfs.ufs.dirhash_maxmem=67108864 # Explicit Congestion Notification (see http://en.wikipedia.org/wiki/Explicit_Congestion_Notification) net.inet.tcp.ecn.enable=1 # Flowtable - flow caching mechanism # Useful for routers #net.inet.flowtable.enable=1 #net.inet.flowtable.nmbflows=65535 # Extreme polling tuning #kern.polling.burst_max=1000 #kern.polling.each_burst=1000 #kern.polling.reg_frac=100 #kern.polling.user_frac=1 #kern.polling.idle_poll=0 # IPFW dynamic rules and timeouts tuning # Increase dyn_buckets till net.inet.ip.fw.curr_dyn_buckets is lower net.inet.ip.fw.dyn_buckets=65536 net.inet.ip.fw.dyn_max=65536 net.inet.ip.fw.dyn_ack_lifetime=120 net.inet.ip.fw.dyn_syn_lifetime=10 net.inet.ip.fw.dyn_fin_lifetime=2 net.inet.ip.fw.dyn_short_lifetime=10 # Make packets pass firewall only once when using dummynet # i.e. packets going thru pipe are passing out from firewall with accept #net.inet.ip.fw.one_pass=1 # shm_use_phys Wires all shared pages, making them unswappable # Use this to lessen Virtual Memory Manager's work when using Shared Mem. # Useful for databases #kern.ipc.shm_use_phys=1 /boot/loader.conf: # Accept filters for data, http and DNS requests # Usefull when your software uses select() instead of kevent/kqueue or when you under DDoS # DNS accf available on 8.0+ accf_data_load="YES" accf_http_load="YES" accf_dns_load="YES" # Async IO system calls aio_load="YES" # Adds NCQ support in FreeBSD # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ # 8.0+ only #ahci_load= #siis_load= # Increase kernel memory size to 3G. # # Use ONLY if you have KVA_PAGES in kernel configuration, and you have more than 3G RAM # Otherwise panic will happen on next reboot! # # It's required for high buffer sizes: kern.ipc.nmbjumbop, kern.ipc.nmbclusters, etc # Useful on highload stateful firewalls, proxies or ZFS fileservers # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #vm.kmem_size="3G" # Older versions of FreeBSD can't tune maxfiles on the fly #kern.maxfiles="200000" # Useful for databases # Sets maximum data size to 1G # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #kern.maxdsiz="1G" # Maximum buffer size(vfs.maxbufspace) # You can check current one via vfs.bufspace # Should be lowered/upped depending on server's load-type # Usually decreased to preserve kmem # (default is 200M) #kern.maxbcache="512M" # Sendfile buffers # For i386 only #kern.ipc.nsfbufs=10240 # syncache Hash table tuning net.inet.tcp.syncache.hashsize=1024 net.inet.tcp.syncache.bucketlimit=100 # Incresed hostcache net.inet.tcp.hostcache.hashsize="16384" net.inet.tcp.hostcache.bucketlimit="100" # TCP control-block Hash table tuning net.inet.tcp.tcbhashsize=4096 # Enable superpages, for 7.2+ only # Also read http://lists.freebsd.org/pipermail/freebsd-hackers/2009-November/030094.html vm.pmap.pg_ps_enabled=1 # Usefull if you are using Intel-Gigabit NIC #hw.em.rxd=4096 #hw.em.txd=4096 #hw.em.rx_process_limit="-1" # Also if you have ALOT interrupts on NIC - play with following parameters # NOTE: You should set them for every NIC #dev.em.0.rx_int_delay: 250 #dev.em.0.tx_int_delay: 250 #dev.em.0.rx_abs_int_delay: 250 #dev.em.0.tx_abs_int_delay: 250 # There is also multithreaded version of em drivers can be found here: # http://people.yandex-team.ru/~wawa/ # # for additional em monitoring and statistics use # `sysctl dev.em.0.stats=1 ; dmesg` # #Same tunings for igb #hw.igb.rxd=4096 #hw.igb.txd=4096 #hw.igb.rx_process_limit=100 # Some useful netisr tunables. See sysctl net.isr #net.isr.defaultqlimit=4096 #net.isr.maxqlimit: 10240 # Bind netisr threads to CPUs #net.isr.bindthreads=1 # Nicer boot logo =) loader_logo="beastie" And finally here is my additions to GENERIC kernel # Just some of them, see also # cat /sys/{i386,amd64,}/conf/NOTES # This one useful only on i386 #options KVA_PAGES=512 # You can play with HZ in environments with high interrupt rate (default is 1000) # 100 is for my notebook to prolong it's battery life #options HZ=100 # Polling is goot on network loads with high packet rates and low-end NICs # NB! Do not enable it if you want more than one netisr thread #options DEVICE_POLLING # Eliminate datacopy on socket read-write # To take advantage with zero copy sockets you should have an MTU of 8K(amd64) # (4k for i386). This req. is only for receiving data. # Read more in man zero_copy_sockets #options ZERO_COPY_SOCKETS # Support TCP sign. Used for IPSec options TCP_SIGNATURE options IPSEC # This ones can be loaded as modules. They described in loader.conf section #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # Adding ipfw, also can be loaded as modules options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_FORWARD # Adding kernel NAT options IPFIREWALL_NAT options LIBALIAS # Traffic shaping options DUMMYNET # Divert, i.e. for userspace NAT options IPDIVERT # This is for OpenBSD's pf firewall device pf device pflog # pf's QoS - ALTQ options ALTQ options ALTQ_CBQ # Class Bases Queuing (CBQ) options ALTQ_RED # Random Early Detection (RED) options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC) options ALTQ_PRIQ # Priority Queuing (PRIQ) options ALTQ_NOPCC # Required for SMP build # Pretty console # Manual can be found here http://forums.freebsd.org/showthread.php?t=6134 #options VESA #options SC_PIXEL_MODE # Disable reboot on Ctrl Alt Del #options SC_DISABLE_REBOOT # Change normal|kernel messages color options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK) # More scroll space options SC_HISTORY_SIZE=8192 # Adding hardware crypto device device crypto device cryptodev # Useful network interfaces device vlan device tap #Virtual Ethernet driver device gre #IP over IP tunneling device if_bridge #Bridge interface device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPsec interface device lagg #Link aggregation interface device stf #IPv4-IPv6 port # Also for my notebook, but may be used with Opteron #device amdtemp # Support for ECMP. More than one route for destination # Works even with default route so one can use it as LB for two ISP # For now code is unstable and panics (panic: rtfree 2) on route deletions. #options RADIX_MPATH # Multicast routing #options MROUTING #options PIM # DTrace options KDTRACE_HOOKS # all architectures - enable general DTrace hooks options DDB_CTF # all architectures - kernel ELF linker loads CTF data #options KDTRACE_FRAME # amd64-only # Adaptive spining in lockmgr (8.x+) # See http://www.mail-archive.com/[email protected]/msg10782.html options ADAPTIVE_LOCKMGRS # UTF-8 in console (9.x+) #options TEKEN_UTF8 #options TEKEN_XTERM # NCQ support # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ #options ATA_CAM # FreeBSD 9+ # Deadlock resolver thread # For additional information see http://www.mail-archive.com/[email protected]/msg18124.html #options DEADLKRES PS. Also most of FreeBSD's limits can be monitored by # vmstat -z and # limits PPS. variety of network counters can be monitored via # netstat -s In FreeBSD-9 netstat's -Q option appeared, try following command to display netisr stats # netstat -Q PPPS. also see # man 7 tuning PPPPS. I wanted to thank FreeBSD community, especially author of nginx - Igor Sysoev, nginx-ru@ and FreeBSD-performance@ mailing lists for providing useful information about FreeBSD tuning. So here is the question: What tunings are you using on yours FreeBSD servers? You can also post your /etc/sysctl.conf, /boot/loader.conf, kernel options, etc with description of its' meaning (do not copy-paste from sysctl -d). Don't forget to specify server type (web, smb, gateway, etc) Let's share experience!

    Read the article

  • Building Awesome WM

    - by Dragan Chupacabrovic
    Hello, I am following these steps in order to build Awesome window manager on 10.04 I am building 3.4 while the tutorial is for 3.1 I installed all of the specified dependencies including cairo. EDIT I ran: sudo apt-get install libxcb-xtest0-dev libxcb-property1-dev libxdg-basedir-dev libstartup-notification0-dev and now it looks like I'm missing a library Please advise: >awesome-3.4$ make Running cmake… -- cat -> /bin/cat -- ln -> /bin/ln -- grep -> /bin/grep -- git -> /usr/bin/git -- hostname -> /bin/hostname -- gperf -> /usr/bin/gperf -- asciidoc -> /usr/bin/asciidoc -- xmlto -> /usr/bin/xmlto -- gzip -> /bin/gzip -- lua -> /usr/bin/lua -- luadoc -> /usr/bin/luadoc -- convert -> /usr/bin/convert -- Configuring lib/naughty.lua -- Configuring lib/awful/tooltip.lua -- Configuring lib/awful/init.lua -- Configuring lib/awful/titlebar.lua -- Configuring lib/awful/key.lua -- Configuring lib/awful/mouse/init.lua -- Configuring lib/awful/mouse/finder.lua -- Configuring lib/awful/autofocus.lua -- Configuring lib/awful/screen.lua -- Configuring lib/awful/rules.lua -- Configuring lib/awful/widget/init.lua -- Configuring lib/awful/widget/taglist.lua -- Configuring lib/awful/widget/graph.lua -- Configuring lib/awful/widget/tasklist.lua -- Configuring lib/awful/widget/common.lua -- Configuring lib/awful/widget/prompt.lua -- Configuring lib/awful/widget/launcher.lua -- Configuring lib/awful/widget/button.lua -- Configuring lib/awful/widget/layoutbox.lua -- Configuring lib/awful/widget/layout/init.lua -- Configuring lib/awful/widget/layout/vertical.lua -- Configuring lib/awful/widget/layout/horizontal.lua -- Configuring lib/awful/widget/layout/default.lua -- Configuring lib/awful/widget/progressbar.lua -- Configuring lib/awful/widget/textclock.lua -- Configuring lib/awful/dbus.lua -- Configuring lib/awful/remote.lua -- Configuring lib/awful/client.lua -- Configuring lib/awful/prompt.lua -- Configuring lib/awful/completion.lua -- Configuring lib/awful/tag.lua -- Configuring lib/awful/util.lua -- Configuring lib/awful/button.lua -- Configuring lib/awful/menu.lua -- Configuring lib/awful/hooks.lua -- Configuring lib/awful/wibox.lua -- Configuring lib/awful/layout/init.lua -- Configuring lib/awful/layout/suit/init.lua -- Configuring lib/awful/layout/suit/floating.lua -- Configuring lib/awful/layout/suit/fair.lua -- Configuring lib/awful/layout/suit/spiral.lua -- Configuring lib/awful/layout/suit/magnifier.lua -- Configuring lib/awful/layout/suit/tile.lua -- Configuring lib/awful/layout/suit/max.lua -- Configuring lib/awful/placement.lua -- Configuring lib/awful/startup_notification.lua -- Configuring lib/beautiful.lua -- Configuring themes/zenburn//theme.lua -- Configuring themes/default//theme.lua -- Configuring themes/sky//theme.lua -- Configuring config.h -- Configuring awesomerc.lua -- Configuring awesome-version-internal.h -- Configuring awesome.doxygen -- Configuring done -- Generating done -- Build files have been written to: /home/druden/util/awesome-3.4/.build-vedroid-i486-linux-gnu-4.4.3 Running make Makefile… Building… [ 4%] Built target generated_sources [ 5%] Building C object CMakeFiles/awesome.dir/awesome.c.o In file included from /home/druden/util/awesome-3.4/spawn.h:25, from /home/druden/util/awesome-3.4/awesome.c:33: /home/druden/util/awesome-3.4/globalconf.h:57: error: expected specifier-qualifier-list before ‘xcb_event_handlers_t’ In file included from /home/druden/util/awesome-3.4/awesome.c:34: /home/druden/util/awesome-3.4/client.h: In function ‘client_stack’: /home/druden/util/awesome-3.4/client.h:212: error: ‘awesome_t’ has no member named ‘client_need_stack_refresh’ /home/druden/util/awesome-3.4/client.h: In function ‘client_raise’: /home/druden/util/awesome-3.4/client.h:227: error: ‘awesome_t’ has no member named ‘stack’ In file included from /home/druden/util/awesome-3.4/awesome.c:42: /home/druden/util/awesome-3.4/titlebar.h: In function ‘titlebar_update_geometry’: /home/druden/util/awesome-3.4/titlebar.h:150: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/titlebar.h:151: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/titlebar.h:152: error: ‘awesome_t’ has no member named ‘L’ In file included from /home/druden/util/awesome-3.4/awesome.c:47: /home/druden/util/awesome-3.4/common/xutil.h: In function ‘xutil_get_text_property_from_reply’: /home/druden/util/awesome-3.4/common/xutil.h:39: warning: ‘STRING’ is deprecated (declared at /usr/local/include/xcb/xcb_atom.h:83) /home/druden/util/awesome-3.4/common/xutil.h: At top level: /home/druden/util/awesome-3.4/common/xutil.h:60: error: expected ‘)’ before ‘*’ token /home/druden/util/awesome-3.4/awesome.c: In function ‘awesome_atexit’: /home/druden/util/awesome-3.4/awesome.c:65: error: ‘awesome_t’ has no member named ‘hooks’ /home/druden/util/awesome-3.4/awesome.c:66: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/awesome.c:66: error: ‘awesome_t’ has no member named ‘hooks’ /home/druden/util/awesome-3.4/awesome.c:68: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/awesome.c:73: error: ‘awesome_t’ has no member named ‘embedded’ /home/druden/util/awesome-3.4/awesome.c:76: error: ‘awesome_t’ has no member named ‘embedded’ /home/druden/util/awesome-3.4/awesome.c:77: error: ‘awesome_t’ has no member named ‘embedded’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: warning: type defaults to ‘int’ in declaration of ‘c’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:89: error: ‘awesome_t’ has no member named ‘clients’ /home/druden/util/awesome-3.4/awesome.c:91: error: invalid type argument of ‘unary *’ (have ‘int’) /home/druden/util/awesome-3.4/awesome.c:92: error: invalid type argument of ‘unary *’ (have ‘int’) /home/druden/util/awesome-3.4/awesome.c:96: error: ‘awesome_t’ has no member named ‘L’ /home/druden/util/awesome-3.4/awesome.c: In function ‘a_xcb_check_cb’: /home/druden/util/awesome-3.4/awesome.c:223: warning: implicit declaration of function ‘xcb_event_handle’ /home/druden/util/awesome-3.4/awesome.c:223: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:230: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c: In function ‘awesome_restart’: /home/druden/util/awesome-3.4/awesome.c:277: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c: In function ‘xerror’: /home/druden/util/awesome-3.4/awesome.c:305: error: ‘XCB_EVENT_ERROR_BAD_WINDOW’ undeclared (first use in this function) /home/druden/util/awesome-3.4/awesome.c:305: error: (Each undeclared identifier is reported only once /home/druden/util/awesome-3.4/awesome.c:305: error: for each function it appears in.) /home/druden/util/awesome-3.4/awesome.c:306: error: ‘XCB_EVENT_ERROR_BAD_MATCH’ undeclared (first use in this function) /home/druden/util/awesome-3.4/awesome.c:308: error: ‘XCB_EVENT_ERROR_BAD_VALUE’ undeclared (first use in this function) /home/druden/util/awesome-3.4/awesome.c: In function ‘main’: /home/druden/util/awesome-3.4/awesome.c:369: error: ‘awesome_t’ has no member named ‘keygrabber’ /home/druden/util/awesome-3.4/awesome.c:370: error: ‘awesome_t’ has no member named ‘mousegrabber’ /home/druden/util/awesome-3.4/awesome.c:376: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:377: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:381: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:382: error: ‘awesome_t’ has no member named ‘argv’ /home/druden/util/awesome-3.4/awesome.c:424: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:425: error: ‘awesome_t’ has no member named ‘timer’ /home/druden/util/awesome-3.4/awesome.c:431: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:432: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:433: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:434: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:435: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:436: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:443: error: ‘awesome_t’ has no member named ‘default_screen’ /home/druden/util/awesome-3.4/awesome.c:450: error: ‘awesome_t’ has no member named ‘have_xtest’ /home/druden/util/awesome-3.4/awesome.c:462: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:464: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:465: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:467: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:468: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:471: warning: implicit declaration of function ‘xcb_event_handlers_init’ /home/druden/util/awesome-3.4/awesome.c:471: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:472: warning: implicit declaration of function ‘xutil_error_handler_catch_all_set’ /home/druden/util/awesome-3.4/awesome.c:472: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:490: warning: implicit declaration of function ‘xcb_event_poll_for_event_loop’ /home/druden/util/awesome-3.4/awesome.c:490: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:493: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:496: error: ‘awesome_t’ has no member named ‘keysyms’ /home/druden/util/awesome-3.4/awesome.c:507: error: ‘awesome_t’ has no member named ‘colors’ /home/druden/util/awesome-3.4/awesome.c:510: error: ‘awesome_t’ has no member named ‘colors’ /home/druden/util/awesome-3.4/awesome.c:513: error: ‘awesome_t’ has no member named ‘font’ /home/druden/util/awesome-3.4/awesome.c:519: error: ‘awesome_t’ has no member named ‘keysyms’ /home/druden/util/awesome-3.4/awesome.c:519: error: ‘awesome_t’ has no member named ‘numlockmask’ /home/druden/util/awesome-3.4/awesome.c:520: error: ‘awesome_t’ has no member named ‘shiftlockmask’ /home/druden/util/awesome-3.4/awesome.c:520: error: ‘awesome_t’ has no member named ‘capslockmask’ /home/druden/util/awesome-3.4/awesome.c:521: error: ‘awesome_t’ has no member named ‘modeswitchmask’ /home/druden/util/awesome-3.4/awesome.c:563: error: ‘awesome_t’ has no member named ‘evenths’ /home/druden/util/awesome-3.4/awesome.c:572: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:575: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:576: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:577: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:578: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:579: error: ‘awesome_t’ has no member named ‘loop’ /home/druden/util/awesome-3.4/awesome.c:580: error: ‘awesome_t’ has no member named ‘loop’ make[3]: *** [CMakeFiles/awesome.dir/awesome.c.o] Error 1 make[2]: *** [CMakeFiles/awesome.dir/all] Error 2 make[1]: *** [all] Error 2 make: *** [cmake-build] Error 2

    Read the article

  • Metro apps crash on startup, driver or permissions issue?

    - by Vee
    After installing Win8 x64 RC, Metro apps worked correctly, but desktop OpenGL apps were slow and unresponsive. I installed the latest Win8 nVidia drivers, and the OpenGL apps started working correctly. At the same time, because of annoying permission messages, I changed the C:\ drive and all its files ownerships to my user, and gave it full permission. I restarted my pc after installing the drivers, and now Metro apps only show the splash screen, then crash. I tried installing other versions of the nVidia drivers, with the same result. My GPU is a GeForce GTX275. Is this a known problem with nVidia drivers? Or maybe changing the ownership of C:\ is the real problem? Thank you. More information (after looking in the event viewer) I've managed to find the problem and the error in the Event Viewer. I still cannot solve it. Here's the information I found by opening the Mail app and letting it crash: Log Name: Microsoft-Windows-TWinUI/Operational Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 15.54.17 Event ID: 5961 Task Category: (5961) Level: Error Keywords: User: VEE-PC\Vittorio Computer: vee-pc Description: Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail for the Windows.Launch contract failed with error: The app didn't start.. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>5961</EventID> <Version>0</Version> <Level>2</Level> <Task>5961</Task> <Opcode>0</Opcode> <Keywords>0x4000000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T13:54:17.472416600Z" /> <EventRecordID>6524</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="6756" /> <Channel>Microsoft-Windows-TWinUI/Operational</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="AppId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> <Data Name="ContractId">Windows.Launch</Data> <Data Name="ErrorCode">-2144927141</Data> </EventData> </Event> Found other stuff, this is another error that appears when opening a Metro app: Log Name: Application Source: ESENT Date: 07/06/2012 16.01.00 Event ID: 490 Task Category: General Level: Error Keywords: Classic User: N/A Computer: vee-pc Description: svchost (1376) SRUJet: An attempt to open the file "C:\Windows\system32\SRU\SRU.log" for read / write access failed with system error 5 (0x00000005): "Access is denied. ". The open file operation will fail with error -1032 (0xfffffbf8). Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="ESENT" /> <EventID Qualifiers="0">490</EventID> <Level>2</Level> <Task>1</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:01:00.000000000Z" /> <EventRecordID>11854</EventRecordID> <Channel>Application</Channel> <Computer>vee-pc</Computer> <Security /> </System> <EventData> <Data>svchost</Data> <Data>1376</Data> <Data>SRUJet: </Data> <Data>C:\Windows\system32\SRU\SRU.log</Data> <Data>-1032 (0xfffffbf8)</Data> <Data>5 (0x00000005)</Data> <Data>Access is denied. </Data> </EventData> </Event> After changing permissions again (adding Everyone and Creator Owner to System32), the "access denied to sru.log" error disappears, but this one appears in its place: Log Name: Application Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 16.16.34 Event ID: 2486 Task Category: (2414) Level: Error Keywords: (64),Process Lifetime Manager User: VEE-PC\Vittorio Computer: vee-pc Description: App microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail did not launch within its allotted time. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>2486</EventID> <Version>0</Version> <Level>2</Level> <Task>2414</Task> <Opcode>0</Opcode> <Keywords>0x2000000000000042</Keywords> <TimeCreated SystemTime="2012-06-07T14:16:34.616499600Z" /> <EventRecordID>11916</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="6996" /> <Channel>Application</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="ApplicationId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> </EventData> </Event> Now I'm stuck. It tells me "Activation of app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional information." but I can't find the Microsoft-Windows-TWinUI/Operational log. I'm starting a bounty. I found the TWinUI/Operational log. It only tells me: Log Name: Microsoft-Windows-TWinUI/Operational Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 16.28.57 Event ID: 5961 Task Category: (5961) Level: Error Keywords: User: VEE-PC\Vittorio Computer: vee-pc Description: Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail for the Windows.BackgroundTasks contract failed with error: The app didn't start.. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>5961</EventID> <Version>0</Version> <Level>2</Level> <Task>5961</Task> <Opcode>0</Opcode> <Keywords>0x4000000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:28:57.238140800Z" /> <EventRecordID>6536</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="2624" /> <Channel>Microsoft-Windows-TWinUI/Operational</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="AppId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> <Data Name="ContractId">Windows.BackgroundTasks</Data> <Data Name="ErrorCode">-2144927141</Data> </EventData> </Event> I need to go deeper. I found a forum thread that told me to look for "DCOM" errors. I found this one related to the app crash "The server Microsoft.WindowsLive.Mail.wwa did not register with DCOM within the required timeout." Log Name: System Source: Microsoft-Windows-DistributedCOM Date: 07/06/2012 16.46.45 Event ID: 10010 Task Category: None Level: Error Keywords: Classic User: VEE-PC\Vittorio Computer: vee-pc Description: The server Microsoft.WindowsLive.Mail.wwa did not register with DCOM within the required timeout. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" /> <EventID Qualifiers="0">10010</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:46:45.586943800Z" /> <EventRecordID>2763</EventRecordID> <Correlation /> <Execution ProcessID="804" ThreadID="2364" /> <Channel>System</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="param1">Microsoft.WindowsLive.Mail.wwa</Data> </EventData> </Event>

    Read the article

  • Set up linux box for secure local hosting a-z

    - by microchasm
    I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP/MySQL: To upgrade PHP and MySQL to the latest versions, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! Add IUS repository to our package manager cd /tmp wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. # list all the packages in the IUS repository; use this to find PHP/MySQL version and libraries you want to install Remove old version of PHP and install newer version from IUS rpm -qa | grep php # to list all of the installed php packages we want to remove yum shell # open an interactive yum shell remove php-common php-mysql php-cli #remove installed PHP components install php53 php53-mysql php53-cli php53-common #add packages you want transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) Upgrade MySQL from IUS repository /etc/init.d/mysqld stop rpm -qa | grep mysql # to see installed mysql packages yum shell remove mysql mysql-server #remove installed MySQL components install mysql51 mysql51-server mysql51-devel transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell service mysqld start mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project Upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Install rssh (restricted shell) to provide scp and sftp access, without allowing ssh login cd /tmp wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm useradd -m -d /home/dev -s /usr/bin/rssh dev passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. vi /etc/rssh.conf Uncomment or add: allowscp allowsftp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). rssh instructions appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html Set up virtual interfaces ifconfig eth1:1 192.168.1.3 up #start up the virtual interface cd /etc/sysconfig/network-scripts/ cp ifcfg-eth1 ifcfg-eth1:1 #copy default script and match name to our virtual interface vi ifcfg-eth1:1 #modify eth1:1 script #ifcfg-eth1:1 | modify so it looks like this: DEVICE=eth1:1 IPADDR=192.168.1.3 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes NAME=eth1:1 Add more Virtual interfaces as needed by repeating. Because of the ONBOOT=yes line in the ifcfg-eth1:1 file, this interface will be brought up when the system boots, or the network starts/restarts. service network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] ping 192.168.1.3 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.105 ms Virtualhosts In the rssh section above I added a user to use for SFTP. In this users' home directory, I created a folder called 'https'. This is where the documents for this site will live, so I need to add a virtualhost that will point to it. I will use the above virtual interface for this site (herein called dev.site.local). vi /etc/http/conf/httpd.conf Add the following to the end of httpd.conf: <VirtualHost 192.168.1.3:80> ServerAdmin [email protected] DocumentRoot /home/dev/https ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> I put a dummy index.html file in the https directory just to check everything out. I tried browsing to it, and was met with permission denied errors. The logs only gave an obscure reference to what was going on: [Mon May 17 14:57:11 2010] [error] [client 192.168.1.100] (13)Permission denied: access to /index.html denied I tried chmod 777 et. al., but to no avail. Turns out, I needed to chmod+x the https directory and its' parent directories. chmod +x /home chmod +x /home/dev chmod +x /home/dev/https This solved that problem. DNS I'm handling DNS via our local Windows Server 2003 box. However, the CentOS documentation for BIND can be found here: http://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-bind.html SSL To get SSL working, I changed the following in httpd.conf: NameVirtualHost 192.168.1.3:443 #make sure this line is in httpd.conf <VirtualHost 192.168.1.3:443> #change port to 443 ServerAdmin [email protected] DocumentRoot /home/dev/https ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> Unfortunately, I keep getting (Error code: ssl_error_rx_record_too_long) errors when trying to access a page with SSL. As JamesHannah gracefully pointed out below, I had not set up the locations of the certs in httpd.conf, and thusly was getting the page thrown at the broswer as the cert making the browser balk. So first, I needed to set up a CA and make certificate files. I found a great (if old) walkthrough on the process here: http://www.debian-administration.org/articles/284. Here are the relevant steps I took from that article: mkdir /home/CA cd /home/CA/ mkdir newcerts private echo '01' > serial touch index.txt #this and the above command are for the database that will keep track of certs Create an openssl.cnf file in the /home/CA/ dir and edit it per the walkthrough linked above. (For reference, my finished openssl.cnf file looked like this: http://pastebin.com/raw.php?i=hnZDij4T) openssl req -new -x509 -extensions v3_ca -keyout private/cakey.pem -out cacert.pem -days 3650 -config ./openssl.cnf #this creates the cacert.pem which gets distributed and imported to the browser(s) Modified openssl.cnf again per walkthrough instructions. openssl req -new -nodes -out dev.req.pem -config ./openssl.cnf #generates certificate request, and key.pem which I renamed dev.key.pem. Modified openssl.cnf again per walkthrough instructions. openssl ca -out dev.cert.pem -config ./openssl.cnf -infiles dev.req.pem #create and sign certificate. cp dev.cert.pem /home/dev/certs/cert.pem cp dev.key.pem /home/certs/key.pem I updated httpd.conf to reflect the certs and turn SSLEngine on: NameVirtualHost 192.168.1.3:443 <VirtualHost 192.168.1.3:443> ServerAdmin [email protected] DocumentRoot /home/dev/https SSLEngine on SSLCertificateFile /home/dev/certs/cert.pem SSLCertificateKeyFile /home/dev/certs/key.pem ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> Put the CA cert.pem in a web-accessible place, and downloaded/imported it into my browser. Now I can visit https://dev.site.local with no errors or warnings. And this is where I'm at. I will keep editing this as I make progress. Any tips on how to configure SSL email would be appreciated.

    Read the article

  • Server error 500: Undefinable problem with my Zend Framework based site

    - by sanders
    Hello everyone, Lately I had to reinstall my development site on my ubuntu machine since my system crashed after an os update. 4 days later my site is still not running as it should. Whenever i do an action which has in it an action on a database, it stops working. For example when Registring a new user, i get the following error: [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/user/register [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/css/main.css My Bootstrap class looks like this: <?php class Bootstrap extends Zend_Application_Bootstrap_Bootstrap{ /** * * @var unknown_type */ public $frontcontroller; /** * * @var unknown_type */ protected $_logger; /** * * @var unknown_type */ protected $_acl; /** * * @var unknown_type */ protected $_auth; /** * Setup the logging */ protected function _initLogging() { $this->bootstrap('frontController'); $logger = new Zend_Log(); $writer = 'production' == $this->getEnvironment() ? new Zend_Log_Writer_Stream(APPLICATION_PATH . '/../data/logs/app.log') : new Zend_Log_Writer_Firebug(); $logger->addWriter($writer); if ('production' == $this->getEnvironment()) { $filter = new Zend_Log_Filter_Priority(Zend_Log::CRIT); $logger->addFilter($filter); } $this->_logger = $logger; Zend_Registry::set('log', $logger); } protected function _initDefaultModuleAutoloader(){ $this->_logger->info('Bootstrap '. __METHOD__); $this->_resourceLoader = new Zend_Application_Module_Autoloader(array( 'namespace' => 'EventManager', 'basePath' => APPLICATION_PATH . '/modules/eventManager', )); $this->_resourceLoader->addResourceTypes(array( 'modelResource' => array( 'path' => 'models/resources', 'namespace' => 'Resource', ), 'service' => array( 'path' => 'services', 'namespace' => 'Service' ), )); } // @todo develop this function protected function _initDbProfiler(){ $this->_logger->info('Bootstrap ' . __METHOD__); if ('production' !== $this->getEnvironment()) { $this->bootstrap('db'); $profiler = new Zend_Db_Profiler_Firebug('All DB Queries'); $profiler->setEnabled(true); $this->getPluginResource('db')->getDbAdapter()->setProfiler($profiler); } } /** * Add Controller Action Helpers */ protected function _initActionHelpers() { $this->_logger->info('Bootstrap ' . __METHOD__); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Acl()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_RedirectCommon()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Service()); } /** * * @return unknown_type */ protected function _initRoutes(){ $this->_logger->info('Initialize Routes '. __METHOD__); $this->bootstrap('frontController'); $router = $this->frontController->getRouter(); $route = new Zend_Controller_Router_route( 'register', array( 'controller' => 'user', 'action' => 'register' ) ); $router->addRoute('register',$route); $route = new Zend_Controller_Router_route( 'login', array( 'controller' => 'user', 'action' => 'login' ) ); $router->addRoute('login',$route); $route = new Zend_Controller_Router_route( 'logout', array( 'controller' => 'user', 'action' => 'logout' ) ); $router->addRoute('logout',$route); } /** * * @return void */ protected function _initLocale(){ $this->_logger->info('Bootstrap '.__METHOD__); $locale = new Zend_Locale('nl_NL'); Zend_Registry::set('Zend_Locale', $locale); } protected function _initAcl(){ $this->_acl = new EventManager_Service_Acl(); } /** * * @return void */ protected function _initViewSettings(){ $this->_logger->info('Bootstrap '.__METHOD__); $this->bootstrap('view'); $this->bootstrap('Acl'); $this->_view = $this->getResource('view'); //set encoding and doctype $this->_view->setEncoding('UTF-8'); $this->_view->doctype('XHTML1_STRICT'); $this->_view->headMeta()->appendHttpEquiv('Content-Type', 'text/html; charset=UTF-8'); $this->_view->headMeta()->appendHttpEquiv('Content-Language', 'en-US'); //@todo op een later moment moeten hier nog de stylesheets worden toegevoegd $this->_view->headLink()->appendStylesheet('/css/main.css'); //$this->_view->headTitle('Event Manager'); /* Set the head style. $this->_view->headTitle->headStyle(); */ $this->_view->headTitle()->setSeparator(' - '); $this->_auth = Zend_Auth::getInstance(); $navigation = new Zend_Config_Xml(APPLICATION_PATH.'/configs/navigation.xml','nav'); $navContainer = new Zend_Navigation($navigation); $this->_view->navigation($navContainer)->setAcl($this->_acl)->setRole($this->_auth->getStorage()->read()->usr_role); //THIS IS LINE 169!!!!!!!!! } /** * Add graceful error handling to the dispatch, this will handle * errors during Front Controller dispatch. */ public function run() { $errorHandling = $this->getOption('errorhandling'); try { parent::run(); } catch(Exception $e) { if (true == (bool) $errorHandling['graceful']) { $this->__handleErrors($e, $errorHandling['email']); } else { throw $e; } } } /** * Handle errors gracefully, this will work as long as the views, * and the Zend classes are available * * @param Exception $e * @param string $email */ protected function __handleErrors(Exception $e, $email) { header('HTTP/1.1 500 Internal Server Error'); $view = new Zend_View(); $view->addScriptPath(dirname(__FILE__) . '/../views/scripts'); echo $view->render('fatalError.phtml'); if ('' != $email) { $mail = new Zend_Mail(); $mail->setSubject('Fatal error in application Storefront'); $mail->addTo($email); $mail->setBodyText( $e->getFile() . "\n" . $e->getMessage() . "\n" . $e->getTraceAsString() . "\n" ); @$mail->send(); } } } I have tried to debug my code, but everyting goes well until I do somethign with the db. But I don't know what goes wrong with the db. I don't get any clear error messages. Can someone help me? Some more possible interesting data: [bootstrap] resources.db.adapter = "PDO_MYSQL" resources.db.isdefaulttableadapter = true resources.db.params.dbname = "ladosa" resources.db.params.username = "root" resources.db.params.password = "root" resources.db.params.hostname = "localhost" resources.db.params.charset = "UTF8" resources.db.params.profiler.enabled = true resources.db.params.profiler.class = Zend_Db_Profiler_Firebug Autoloadernamespaces[] = "Zend_" Autoloadernamespaces[] = "SF_" phpsettings.display_errors = 0 phpsettings.error_reporting = 8191 phpSettings.date.timezone = "Europe/Amsterdam" bootstrap.path = APPLICATION_PATH"/bootstrap/Bootstrap.php" pluginPaths.resource_ = APPLICATION_PATH"/resources" resources.frontcontroller.moduledirectory = APPLICATION_PATH"/modules" resources.frontcontroller.defaultmodule = "eventManager" resources.frontcontroller.params.prefixDefaultModule = true resources.frontcontroller.exceptions = false resources.view[] = "" resources.layout.layoutPath = APPLICATION_PATH "/layouts/scripts" resources.view.encoding = "UTF-8" resources.view.title = Rode kruis Vrijwilligers applicatie ;resources.view.helperPath.Default_View_Helper = APPLICATION_PATH "/modules/eventManager/views/helpers" resources.layout.layout = "main" [production:bootstrap] [development:bootstrap] ;resources.frontController.throwExceptions = 1 ;phpSettings.display_startup_errors=1 ;phpSettings.display_errors = 1 ;resources.frontcontroller.throwerrors = [test:production] btw. I CAN login to my database command line with the given username and password. Update: today i decided to investigate on my http request and i came to an error 500. My apache logs don't give any related information, I think. I posted the logs above. Any idea's?

    Read the article

  • Server error 500: Undefinable problem with my Zend Framework based site

    - by sanders
    Lately I had to reinstall my development site on my ubuntu machine since my system crashed after an os update. 4 days later my site is still not running as it should. Whenever i do an action which has in it an action on a database, it stops working. For example when Registring a new user, i get the following error: [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/user/register [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/css/main.css My Bootstrap class looks like this: <?php class Bootstrap extends Zend_Application_Bootstrap_Bootstrap{ /** * * @var unknown_type */ public $frontcontroller; /** * * @var unknown_type */ protected $_logger; /** * * @var unknown_type */ protected $_acl; /** * * @var unknown_type */ protected $_auth; /** * Setup the logging */ protected function _initLogging() { $this->bootstrap('frontController'); $logger = new Zend_Log(); $writer = 'production' == $this->getEnvironment() ? new Zend_Log_Writer_Stream(APPLICATION_PATH . '/../data/logs/app.log') : new Zend_Log_Writer_Firebug(); $logger->addWriter($writer); if ('production' == $this->getEnvironment()) { $filter = new Zend_Log_Filter_Priority(Zend_Log::CRIT); $logger->addFilter($filter); } $this->_logger = $logger; Zend_Registry::set('log', $logger); } protected function _initDefaultModuleAutoloader(){ $this->_logger->info('Bootstrap '. __METHOD__); $this->_resourceLoader = new Zend_Application_Module_Autoloader(array( 'namespace' => 'EventManager', 'basePath' => APPLICATION_PATH . '/modules/eventManager', )); $this->_resourceLoader->addResourceTypes(array( 'modelResource' => array( 'path' => 'models/resources', 'namespace' => 'Resource', ), 'service' => array( 'path' => 'services', 'namespace' => 'Service' ), )); } // @todo develop this function protected function _initDbProfiler(){ $this->_logger->info('Bootstrap ' . __METHOD__); if ('production' !== $this->getEnvironment()) { $this->bootstrap('db'); $profiler = new Zend_Db_Profiler_Firebug('All DB Queries'); $profiler->setEnabled(true); $this->getPluginResource('db')->getDbAdapter()->setProfiler($profiler); } } /** * Add Controller Action Helpers */ protected function _initActionHelpers() { $this->_logger->info('Bootstrap ' . __METHOD__); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Acl()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_RedirectCommon()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Service()); } /** * * @return unknown_type */ protected function _initRoutes(){ $this->_logger->info('Initialize Routes '. __METHOD__); $this->bootstrap('frontController'); $router = $this->frontController->getRouter(); $route = new Zend_Controller_Router_route( 'register', array( 'controller' => 'user', 'action' => 'register' ) ); $router->addRoute('register',$route); $route = new Zend_Controller_Router_route( 'login', array( 'controller' => 'user', 'action' => 'login' ) ); $router->addRoute('login',$route); $route = new Zend_Controller_Router_route( 'logout', array( 'controller' => 'user', 'action' => 'logout' ) ); $router->addRoute('logout',$route); } /** * * @return void */ protected function _initLocale(){ $this->_logger->info('Bootstrap '.__METHOD__); $locale = new Zend_Locale('nl_NL'); Zend_Registry::set('Zend_Locale', $locale); } protected function _initAcl(){ $this->_acl = new EventManager_Service_Acl(); } /** * * @return void */ protected function _initViewSettings(){ $this->_logger->info('Bootstrap '.__METHOD__); $this->bootstrap('view'); $this->bootstrap('Acl'); $this->_view = $this->getResource('view'); //set encoding and doctype $this->_view->setEncoding('UTF-8'); $this->_view->doctype('XHTML1_STRICT'); $this->_view->headMeta()->appendHttpEquiv('Content-Type', 'text/html; charset=UTF-8'); $this->_view->headMeta()->appendHttpEquiv('Content-Language', 'en-US'); //@todo op een later moment moeten hier nog de stylesheets worden toegevoegd $this->_view->headLink()->appendStylesheet('/css/main.css'); //$this->_view->headTitle('Event Manager'); /* Set the head style. $this->_view->headTitle->headStyle(); */ $this->_view->headTitle()->setSeparator(' - '); $this->_auth = Zend_Auth::getInstance(); $navigation = new Zend_Config_Xml(APPLICATION_PATH.'/configs/navigation.xml','nav'); $navContainer = new Zend_Navigation($navigation); $this->_view->navigation($navContainer)->setAcl($this->_acl)->setRole($this->_auth->getStorage()->read()->usr_role); //THIS IS LINE 169!!!!!!!!! } /** * Add graceful error handling to the dispatch, this will handle * errors during Front Controller dispatch. */ public function run() { $errorHandling = $this->getOption('errorhandling'); try { parent::run(); } catch(Exception $e) { if (true == (bool) $errorHandling['graceful']) { $this->__handleErrors($e, $errorHandling['email']); } else { throw $e; } } } /** * Handle errors gracefully, this will work as long as the views, * and the Zend classes are available * * @param Exception $e * @param string $email */ protected function __handleErrors(Exception $e, $email) { header('HTTP/1.1 500 Internal Server Error'); $view = new Zend_View(); $view->addScriptPath(dirname(__FILE__) . '/../views/scripts'); echo $view->render('fatalError.phtml'); if ('' != $email) { $mail = new Zend_Mail(); $mail->setSubject('Fatal error in application Storefront'); $mail->addTo($email); $mail->setBodyText( $e->getFile() . "\n" . $e->getMessage() . "\n" . $e->getTraceAsString() . "\n" ); @$mail->send(); } } } I have tried to debug my code, but everyting goes well until I do somethign with the db. But I don't know what goes wrong with the db. I don't get any clear error messages. Can someone help me? Some more possible interesting data: [bootstrap] resources.db.adapter = "PDO_MYSQL" resources.db.isdefaulttableadapter = true resources.db.params.dbname = "ladosa" resources.db.params.username = "root" resources.db.params.password = "root" resources.db.params.hostname = "localhost" resources.db.params.charset = "UTF8" resources.db.params.profiler.enabled = true resources.db.params.profiler.class = Zend_Db_Profiler_Firebug Autoloadernamespaces[] = "Zend_" Autoloadernamespaces[] = "SF_" phpsettings.display_errors = 0 phpsettings.error_reporting = 8191 phpSettings.date.timezone = "Europe/Amsterdam" bootstrap.path = APPLICATION_PATH"/bootstrap/Bootstrap.php" pluginPaths.resource_ = APPLICATION_PATH"/resources" resources.frontcontroller.moduledirectory = APPLICATION_PATH"/modules" resources.frontcontroller.defaultmodule = "eventManager" resources.frontcontroller.params.prefixDefaultModule = true resources.frontcontroller.exceptions = false resources.view[] = "" resources.layout.layoutPath = APPLICATION_PATH "/layouts/scripts" resources.view.encoding = "UTF-8" resources.view.title = Rode kruis Vrijwilligers applicatie ;resources.view.helperPath.Default_View_Helper = APPLICATION_PATH "/modules/eventManager/views/helpers" resources.layout.layout = "main" [production:bootstrap] [development:bootstrap] ;resources.frontController.throwExceptions = 1 ;phpSettings.display_startup_errors=1 ;phpSettings.display_errors = 1 ;resources.frontcontroller.throwerrors = [test:production] btw. I CAN login to my database command line with the given username and password. Update: today i decided to investigate on my http request and i came to an error 500. My apache logs don't give any related information, I think. I posted the logs above. Any idea's?

    Read the article

  • After connecting wlan0 to bridge interface (and then removing it), can't connect to AP

    - by gmonk
    I'm on a laptop running Debian Jessie with kernel 3.13-1-amd64; lspci shows that my wireless NIC + driver is 04:00.0 Network controller: Intel Corporation Wireless 3160 (rev 83) Subsystem: Intel Corporation Dual Band Wireless-AC 3160 Kernel driver in use: iwlwifi This has been working without any problems, until I tried creating a bridge for lxc containers to use. I did the same thing as this person here: How-to set up a network bridge on a laptop for LXC use? -- and ended up having the same problem as this poster did, so I decided to "undo" my actions. This hasn't been successful. Actions taken so far: To configure the bridge: #> ip link add type veth #> iw dev wlan0 set 4addr on #> ifconfig veth0 up #> brctl addbr br0 #> brctl addif br0 wlan0 #> brctl addif br0 veth0 #> ifconfig br0 192.168.0.4/24 #> ifconfig wlan0 0.0.0.0 To "deconfigure": #> brctl delif br0 wlan0 #> brctl delif br0 veth0 #> iw dev wlan0 set 4addr off #> ifconfig veth0 down #> ifconfig wlan0 down #> ifconfig br0 down #> brctl delbr br0 Now, dmesg and /var/log/syslog show repeated attempts at connecting to the AP that was working before, which fail after authentication: May 27 09:16:01 myhostname kernel: [11350.757172] wlan0: authenticate with 00:18:f8:54:a3:d6 May 27 09:16:01 myhostname kernel: [11350.759036] wlan0: send auth to 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:01 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: scanning -> authenticating May 27 09:16:01 myhostname wpa_supplicant[8946]: wlan0: Trying to associate with 00:18:f8:54:a3:d6 (SSID='myaccesspoint' freq=2437 MHz) May 27 09:16:01 myhostname kernel: [11350.762615] wlan0: authenticated May 27 09:16:01 myhostname kernel: [11350.762753] iwlwifi 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP May 27 09:16:01 myhostname kernel: [11350.762755] iwlwifi 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP May 27 09:16:01 myhostname kernel: [11350.765080] wlan0: associate with 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:01 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: authenticating -> associating May 27 09:16:01 myhostname kernel: [11350.767474] wlan0: RX AssocResp from 00:18:f8:54:a3:d6 (capab=0x411 status=12 aid=0) May 27 09:16:01 myhostname kernel: [11350.767476] wlan0: 00:18:f8:54:a3:d6 denied association (code=12) May 27 09:16:01 myhostname wpa_supplicant[8946]: wlan0: CTRL-EVENT-ASSOC-REJECT bssid=00:18:f8:54:a3:d6 status_code=12 May 27 09:16:01 myhostname kernel: [11350.788475] wlan0: deauthenticating from 00:18:f8:54:a3:d6 by local choice (reason=3) May 27 09:16:01 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: associating -> disconnected May 27 09:16:01 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: disconnected -> scanning May 27 09:16:02 myhostname dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 14 May 27 09:16:04 myhostname wpa_supplicant[8946]: wlan0: SME: Trying to authenticate with 00:18:f8:54:a3:d6 (SSID='myaccesspoint' freq=2437 MHz) May 27 09:16:04 myhostname kernel: [11354.559579] wlan0: authenticate with 00:18:f8:54:a3:d6 May 27 09:16:04 myhostname kernel: [11354.561458] wlan0: send auth to 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:04 myhostname wpa_supplicant[8946]: wlan0: Trying to associate with 00:18:f8:54:a3:d6 (SSID='myaccesspoint' freq=2437 MHz) May 27 09:16:04 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: scanning -> associating May 27 09:16:04 myhostname kernel: [11354.563445] wlan0: authenticated May 27 09:16:04 myhostname kernel: [11354.563631] iwlwifi 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP May 27 09:16:04 myhostname kernel: [11354.563633] iwlwifi 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP May 27 09:16:04 myhostname kernel: [11354.565727] wlan0: associate with 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:04 myhostname wpa_supplicant[8946]: wlan0: Associated with 00:18:f8:54:a3:d6 May 27 09:16:04 myhostname kernel: [11354.568091] wlan0: RX AssocResp from 00:18:f8:54:a3:d6 (capab=0x411 status=0 aid=9) May 27 09:16:04 myhostname kernel: [11354.569030] wlan0: associated May 27 09:16:04 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: associating -> associated May 27 09:16:05 myhostname kernel: [11354.978204] wlan0: deauthenticated from 00:18:f8:54:a3:d6 (Reason: 15) May 27 09:16:05 myhostname wpa_supplicant[8946]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:18:f8:54:a3:d6 reason=15 May 27 09:16:05 myhostname kernel: [11354.992729] cfg80211: Calling CRDA to update world regulatory domain May 27 09:16:05 myhostname kernel: [11354.995004] cfg80211: World regulatory domain updated: May 27 09:16:05 myhostname kernel: [11354.995005] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) May 27 09:16:05 myhostname kernel: [11354.995006] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) May 27 09:16:05 myhostname kernel: [11354.995007] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) May 27 09:16:05 myhostname kernel: [11354.995007] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) May 27 09:16:05 myhostname kernel: [11354.995008] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) May 27 09:16:05 myhostname kernel: [11354.995009] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) May 27 09:16:05 myhostname kernel: [11354.995010] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) May 27 09:16:05 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: associated -> disconnected May 27 09:16:05 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: disconnected -> scanning May 27 09:16:09 myhostname wpa_supplicant[8946]: wlan0: SME: Trying to authenticate with 00:18:f8:54:a3:d6 (SSID='myaccesspoint' freq=2437 MHz) May 27 09:16:09 myhostname kernel: [11358.763968] wlan0: authenticate with 00:18:f8:54:a3:d6 May 27 09:16:09 myhostname kernel: [11358.765796] wlan0: send auth to 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:09 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: scanning -> authenticating May 27 09:16:09 myhostname wpa_supplicant[8946]: wlan0: Trying to associate with 00:18:f8:54:a3:d6 (SSID='myaccesspoint' freq=2437 MHz) May 27 09:16:09 myhostname kernel: [11358.769957] wlan0: authenticated May 27 09:16:09 myhostname kernel: [11358.770102] iwlwifi 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP May 27 09:16:09 myhostname kernel: [11358.770104] iwlwifi 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP May 27 09:16:09 myhostname kernel: [11358.770846] wlan0: associate with 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:09 myhostname kernel: [11358.773358] wlan0: RX AssocResp from 00:18:f8:54:a3:d6 (capab=0x411 status=12 aid=0) May 27 09:16:09 myhostname kernel: [11358.773361] wlan0: 00:18:f8:54:a3:d6 denied association (code=12) May 27 09:16:09 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: authenticating -> associating May 27 09:16:09 myhostname wpa_supplicant[8946]: wlan0: CTRL-EVENT-ASSOC-REJECT bssid=00:18:f8:54:a3:d6 status_code=12 May 27 09:16:09 myhostname kernel: [11358.802187] wlan0: deauthenticating from 00:18:f8:54:a3:d6 by local choice (reason=3) May 27 09:16:09 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: associating -> disconnected May 27 09:16:09 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: disconnected -> scanning May 27 09:16:12 myhostname wpa_supplicant[8946]: wlan0: SME: Trying to authenticate with 00:18:f8:54:a3:d6 (SSID='myaccesspoint' freq=2437 MHz) May 27 09:16:12 myhostname kernel: [11362.573442] wlan0: authenticate with 00:18:f8:54:a3:d6 May 27 09:16:12 myhostname kernel: [11362.575270] wlan0: send auth to 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:12 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: scanning -> authenticating May 27 09:16:12 myhostname wpa_supplicant[8946]: wlan0: Trying to associate with 00:18:f8:54:a3:d6 (SSID='myaccesspoint' freq=2437 MHz) May 27 09:16:12 myhostname kernel: [11362.580334] wlan0: authenticated May 27 09:16:12 myhostname kernel: [11362.580503] iwlwifi 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP May 27 09:16:12 myhostname kernel: [11362.580516] iwlwifi 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP May 27 09:16:12 myhostname kernel: [11362.583508] wlan0: associate with 00:18:f8:54:a3:d6 (try 1/3) May 27 09:16:12 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: authenticating -> associating May 27 09:16:12 myhostname wpa_supplicant[8946]: wlan0: Associated with 00:18:f8:54:a3:d6 May 27 09:16:12 myhostname kernel: [11362.585908] wlan0: RX AssocResp from 00:18:f8:54:a3:d6 (capab=0x411 status=0 aid=9) May 27 09:16:12 myhostname kernel: [11362.586781] wlan0: associated May 27 09:16:12 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: associating -> associated May 27 09:16:13 myhostname kernel: [11362.947693] wlan0: deauthenticated from 00:18:f8:54:a3:d6 (Reason: 15) May 27 09:16:13 myhostname wpa_supplicant[8946]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:18:f8:54:a3:d6 reason=15 May 27 09:16:13 myhostname kernel: [11362.973461] cfg80211: Calling CRDA to update world regulatory domain May 27 09:16:13 myhostname kernel: [11362.975673] cfg80211: World regulatory domain updated: May 27 09:16:13 myhostname kernel: [11362.975675] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) May 27 09:16:13 myhostname kernel: [11362.975676] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) May 27 09:16:13 myhostname kernel: [11362.975677] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) May 27 09:16:13 myhostname kernel: [11362.975678] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) May 27 09:16:13 myhostname kernel: [11362.975678] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) May 27 09:16:13 myhostname kernel: [11362.975679] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) May 27 09:16:13 myhostname kernel: [11362.975679] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) May 27 09:16:13 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: associated -> disconnected May 27 09:16:13 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: disconnected -> scanning May 27 09:16:14 myhostname NetworkManager[13992]: <warn> Activation (wlan0/wireless): association took too long. May 27 09:16:14 myhostname NetworkManager[13992]: <info> (wlan0): device state change: config -> failed (reason 'no-secrets') [50 120 7] May 27 09:16:14 myhostname NetworkManager[13992]: <info> Marking connection 'Auto myaccesspoint' invalid. May 27 09:16:14 myhostname NetworkManager[13992]: <warn> Activation (wlan0) failed for connection 'Auto myaccesspoint' May 27 09:16:14 myhostname NetworkManager[13992]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0] May 27 09:16:14 myhostname NetworkManager[13992]: <info> (wlan0): deactivating device (reason 'none') [0] May 27 09:16:14 myhostname NetworkManager[13992]: <info> (wlan0): supplicant interface state: scanning -> disconnected The things that jump out at me are "deauthenticating ... by local choice( reason=3)" and the lines that contain "(reason=15)". I've tried various fixes: iwconfig wlan0 power off killing wpa_supplicant connecting with iwconfig + dhclient instead of gnome's network -manager explicitly configuring wlan0 in /etc/network/interfaces creating a /etc/wpa_supplicant.conf file ...but nothing seems to work. I'm not sure what I did wrong, or what step I've skipped in trying to get wlan0 back as a non-bridged device -- I removed it from the bridge and then deleted the bridge itself. Any ideas?

    Read the article

  • I need help on my C++ assignment using MS Visual C++

    - by krayzwytie
    Ok, so I don't want you to do my homework for me, but I'm a little lost with this final assignment and need all the help I can get. Learning about programming is tough enough, but doing it online is next to impossible for me... Now, to get to the program, I am going to paste what I have so far. This includes mostly //comments and what I have written so far. If you can help me figure out where all the errors are and how to complete the assignment, I will really appreciate it. Like I said, I don't want you to do my homework for me (it's my final), but any constructive criticism is welcome. This is my final assignment for this class and it is due tomorrow (Sunday before midnight, Arizona time). This is the assignment: Examine the following situation: o Your company, Datamax, Inc., is in the process of automating its payroll systems. Your manager has asked you to create a program that calculates overtime pay for all employees. Your program must take into account the employee’s salary, total hours worked, and hours worked more than 40 in a week, and then provide an output that is useful and easily understood by company management. • Compile your program utilizing the following background information and the code outline in Appendix D (included in the code section). • Submit your project as an attachment including the code and the output. Company Background: o Three employees: Mark, John, and Mary o The end user needs to be prompted for three specific pieces of input—name, hours worked, and hourly wage. o Calculate overtime if input is greater than 40 hours per week. o Provide six test plans to verify the logic within the program. o Plan 1 must display the proper information for employee #1 with overtime pay. o Plan 2 must display the proper information for employee #1 with no overtime pay. o Plans 3-6 are duplicates of plan 1 and 2 but for the other employees. Program Requirements: o Define a base class to use for the entire program. o The class holds the function calls and the variables related to the overtime pay calculations. o Define one object per employee. Note there will be three employees. o Your program must take the objects created and implement calculations based on total salaries, total hours, and the total number of overtime hours. See the Employee Summary Data section of the sample output. Logic Steps to Complete Your Program: o Define your base class. o Define your objects from your base class. o Prompt for user input, updating your object classes for all three users. o Implement your overtime pay calculations. o Display overtime or regular time pay calculations. See the sample output below. o Implement object calculations by summarizing your employee objects and display the summary information in the example below. And this is the code: // Final_Project.cpp : Defines the entry point for the console application. // #include "stdafx.h" #include <iostream> #include <string> #include <iomanip> using namespace std; // //CLASS DECLARATION SECTION // class CEmployee { public: void ImplementCalculations(string EmployeeName, double hours, double wage); void DisplayEmployInformation(void); void Addsomethingup (CEmployee, CEmployee, CEmployee); string EmployeeName ; int hours ; int overtime_hours ; int iTotal_hours ; int iTotal_OvertimeHours ; float wage ; float basepay ; float overtime_pay ; float overtime_extra ; float iTotal_salaries ; float iIndividualSalary ; }; int main() { system("cls"); cout << "Welcome to the Employee Pay Center"; /* Use this section to define your objects. You will have one object per employee. You have only three employees. The format is your class name and your object name. */ std::cout << "Please enter Employee's Name: "; std::cin >> EmployeeName; std::cout << "Please enter Total Hours for (EmployeeName): "; std::cin >> hours; std::cout << "Please enter Base Pay for(EmployeeName): "; std::cin >> basepay; /* Here you will prompt for the first employee’s information. Prompt the employee name, hours worked, and the hourly wage. For each piece of information, you will update the appropriate class member defined above. Example of Prompts Enter the employee name = Enter the hours worked = Enter his or her hourly wage = */ /* Here you will prompt for the second employee’s information. Prompt the employee name, hours worked, and the hourly wage. For each piece of information, you will update the appropriate class member defined above. Enter the employee name = Enter the hours worked = Enter his or her hourly wage = */ /* Here you will prompt for the third employee’s information. Prompt the employee name, hours worked, and the hourly wage. For each piece of information, you will update the appropriate class member defined above. Enter the employee name = Enter the hours worked = Enter his or her hourly wage = */ /* Here you will implement a function call to implement the employ calcuations for each object defined above. You will do this for each of the three employees or objects. The format for this step is the following: [(object name.function name(objectname.name, objectname.hours, objectname.wage)] ; */ /* This section you will send all three objects to a function that will add up the the following information: - Total Employee Salaries - Total Employee Hours - Total Overtime Hours The format for this function is the following: - Define a new object. - Implement function call [objectname.functionname(object name 1, object name 2, object name 3)] /* } //End of Main Function void CEmployee::ImplementCalculations (string EmployeeName, double hours, double wage){ //Initialize overtime variables overtime_hours=0; overtime_pay=0; overtime_extra=0; if (hours > 40) { /* This section is for the basic calculations for calculating overtime pay. - base pay = 40 hours times the hourly wage - overtime hours = hours worked – 40 - overtime pay = hourly wage * 1.5 - overtime extra pay over 40 = overtime hours * overtime pay - salary = overtime money over 40 hours + your base pay */ /* Implement function call to output the employee information. Function is defined below. */ } // if (hours > 40) else { /* Here you are going to calculate the hours less than 40 hours. - Your base pay is = your hours worked times your wage - Salary = your base pay */ /* Implement function call to output the employee information. Function is defined below. */ } // End of the else } //End of Primary Function void CEmployee::DisplayEmployInformation(); { // This function displays all the employee output information. /* This is your cout statements to display the employee information: Employee Name ............. = Base Pay .................. = Hours in Overtime ......... = Overtime Pay Amount........ = Total Pay ................. = */ } // END OF Display Employee Information void CEmployee::Addsomethingup (CEmployee Employ1, CEmployee Employ2) { // Adds two objects of class Employee passed as // function arguments and saves them as the calling object's data member values. /* Add the total hours for objects 1, 2, and 3. Add the salaries for each object. Add the total overtime hours. */ /* Then display the information below. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%% EMPLOYEE SUMMARY DATA%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%% Total Employee Salaries ..... = 576.43 %%%% Total Employee Hours ........ = 108 %%%% Total Overtime Hours......... = 5 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ } // End of function

    Read the article

  • JPA : optimize EJB-QL query involving large many-to-many join table

    - by Fabien
    Hi all. I'm using Hibernate Entity Manager 3.4.0.GA with Spring 2.5.6 and MySql 5.1. I have a use case where an entity called Artifact has a reflexive many-to-many relation with itself, and the join table is quite large (1 million lines). As a result, the HQL query performed by one of the methods in my DAO takes a long time. Any advice on how to optimize this and still use HQL ? Or do I have no choice but to switch to a native SQL query that would perform a join between the table ARTIFACT and the join table ARTIFACT_DEPENDENCIES ? Here is the problematic query performed in the DAO : @SuppressWarnings("unchecked") public List<Artifact> findDependentArtifacts(Artifact artifact) { Query query = em.createQuery("select a from Artifact a where :artifact in elements(a.dependencies)"); query.setParameter("artifact", artifact); List<Artifact> list = query.getResultList(); return list; } And the code for the Artifact entity : package com.acme.dependencytool.persistence.model; import java.util.ArrayList; import java.util.List; import javax.persistence.CascadeType; import javax.persistence.Column; import javax.persistence.Entity; import javax.persistence.FetchType; import javax.persistence.GeneratedValue; import javax.persistence.Id; import javax.persistence.JoinColumn; import javax.persistence.JoinTable; import javax.persistence.ManyToMany; import javax.persistence.Table; import javax.persistence.UniqueConstraint; @Entity @Table(name = "ARTIFACT", uniqueConstraints={@UniqueConstraint(columnNames={"GROUP_ID", "ARTIFACT_ID", "VERSION"})}) public class Artifact { @Id @GeneratedValue @Column(name = "ID") private Long id = null; @Column(name = "GROUP_ID", length = 255, nullable = false) private String groupId; @Column(name = "ARTIFACT_ID", length = 255, nullable = false) private String artifactId; @Column(name = "VERSION", length = 255, nullable = false) private String version; @ManyToMany(cascade=CascadeType.ALL, fetch=FetchType.EAGER) @JoinTable( name="ARTIFACT_DEPENDENCIES", joinColumns = @JoinColumn(name="ARTIFACT_ID", referencedColumnName="ID"), inverseJoinColumns = @JoinColumn(name="DEPENDENCY_ID", referencedColumnName="ID") ) private List<Artifact> dependencies = new ArrayList<Artifact>(); public Long getId() { return id; } public void setId(Long id) { this.id = id; } public String getGroupId() { return groupId; } public void setGroupId(String groupId) { this.groupId = groupId; } public String getArtifactId() { return artifactId; } public void setArtifactId(String artifactId) { this.artifactId = artifactId; } public String getVersion() { return version; } public void setVersion(String version) { this.version = version; } public List<Artifact> getDependencies() { return dependencies; } public void setDependencies(List<Artifact> dependencies) { this.dependencies = dependencies; } } Thanks in advance. EDIT 1 : The DDLs are generated automatically by Hibernate EntityMananger based on the JPA annotations in the Artifact entity. I have no explicit control on the automaticaly-generated join table, and the JPA annotations don't let me explicitly set an index on a column of a table that does not correspond to an actual Entity (in the JPA sense). So I guess the indexing of table ARTIFACT_DEPENDENCIES is left to the DB, MySQL in my case, which apparently uses a composite index based on both clumns but doesn't index the column that is most relevant in my query (DEPENDENCY_ID). mysql describe ARTIFACT_DEPENDENCIES; +---------------+------------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +---------------+------------+------+-----+---------+-------+ | ARTIFACT_ID | bigint(20) | NO | MUL | NULL | | | DEPENDENCY_ID | bigint(20) | NO | MUL | NULL | | +---------------+------------+------+-----+---------+-------+ EDIT 2 : When turning on showSql in the Hibernate session, I see many occurences of the same type of SQL query, as below : select dependenci0_.ARTIFACT_ID as ARTIFACT1_1_, dependenci0_.DEPENDENCY_ID as DEPENDENCY2_1_, artifact1_.ID as ID1_0_, artifact1_.ARTIFACT_ID as ARTIFACT2_1_0_, artifact1_.GROUP_ID as GROUP3_1_0_, artifact1_.VERSION as VERSION1_0_ from ARTIFACT_DEPENDENCIES dependenci0_ left outer join ARTIFACT artifact1_ on dependenci0_.DEPENDENCY_ID=artifact1_.ID where dependenci0_.ARTIFACT_ID=? Here's what EXPLAIN in MySql says about this type of query : mysql explain select dependenci0_.ARTIFACT_ID as ARTIFACT1_1_, dependenci0_.DEPENDENCY_ID as DEPENDENCY2_1_, artifact1_.ID as ID1_0_, artifact1_.ARTIFACT_ID as ARTIFACT2_1_0_, artifact1_.GROUP_ID as GROUP3_1_0_, artifact1_.VERSION as VERSION1_0_ from ARTIFACT_DEPENDENCIES dependenci0_ left outer join ARTIFACT artifact1_ on dependenci0_.DEPENDENCY_ID=artifact1_.ID where dependenci0_.ARTIFACT_ID=1; +----+-------------+--------------+--------+-------------------+-------------------+---------+---------------------------------------------+------+-------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+--------------+--------+-------------------+-------------------+---------+---------------------------------------------+------+-------+ | 1 | SIMPLE | dependenci0_ | ref | FKEA2DE763364D466 | FKEA2DE763364D466 | 8 | const | 159 | | | 1 | SIMPLE | artifact1_ | eq_ref | PRIMARY | PRIMARY | 8 | dependencytooldb.dependenci0_.DEPENDENCY_ID | 1 | | +----+-------------+--------------+--------+-------------------+-------------------+---------+---------------------------------------------+------+-------+ EDIT 3 : I tried setting the FetchType to LAZY in the JoinTable annotation, but I then get the following exception : Hibernate: select artifact0_.ID as ID1_, artifact0_.ARTIFACT_ID as ARTIFACT2_1_, artifact0_.GROUP_ID as GROUP3_1_, artifact0_.VERSION as VERSION1_ from ARTIFACT artifact0_ where artifact0_.GROUP_ID=? and artifact0_.ARTIFACT_ID=? 51545 [btpool0-2] ERROR org.hibernate.LazyInitializationException - failed to lazily initialize a collection of role: com.acme.dependencytool.persistence.model.Artifact.dependencies, no session or session was closed org.hibernate.LazyInitializationException: failed to lazily initialize a collection of role: com.acme.dependencytool.persistence.model.Artifact.dependencies, no session or session was closed at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationException(AbstractPersistentCollection.java:380) at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationExceptionIfNotConnected(AbstractPersistentCollection.java:372) at org.hibernate.collection.AbstractPersistentCollection.readSize(AbstractPersistentCollection.java:119) at org.hibernate.collection.PersistentBag.size(PersistentBag.java:248) at com.acme.dependencytool.server.DependencyToolServiceImpl.createArtifactViewBean(DependencyToolServiceImpl.java:93) at com.acme.dependencytool.server.DependencyToolServiceImpl.createArtifactViewBean(DependencyToolServiceImpl.java:109) at com.acme.dependencytool.server.DependencyToolServiceImpl.search(DependencyToolServiceImpl.java:48) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.google.gwt.user.server.rpc.RPC.invokeAndEncodeResponse(RPC.java:527) at com.google.gwt.user.server.rpc.RemoteServiceServlet.processCall(RemoteServiceServlet.java:166) at com.google.gwt.user.server.rpc.RemoteServiceServlet.doPost(RemoteServiceServlet.java:86) at javax.servlet.http.HttpServlet.service(HttpServlet.java:637) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:487) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:362) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:729) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:405) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.handler.RequestLogHandler.handle(RequestLogHandler.java:49) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.Server.handle(Server.java:324) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:505) at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:843) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:647) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:205) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:380) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:395) at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:488)

    Read the article

< Previous Page | 377 378 379 380 381 382 383 384  | Next Page >