alias method - Page 382

Lazy HTML attributes wrapping in Internet Explorer

- by AGS777

Having encountered this Internet Explorer (all versions) behavior several times previously, I eventually decided to share this most probably useless knowledge. Excuse my lengthy explanations because I am going to show the behavior along with a very simple case when one can come across it inadvertently. Let's say I want to implement some simple templating solution in JavaScript. I wrote an HTML template with an intention to bind data to it on the client side: Please note, that name of the “sys-template” class is just a coincidence. I do not use any ASP.NET AJAX code in this simple example. As you can see we need to replace placeholders (property name wrapped with curly braces) with actual data. Also, as you can see, many of the placeholders are situated within attribute values and it is where the danger lies. I am going to use <a /> element HTML as a template and replace each placeholder pattern with respective properties’ values with a little bit of jQuery like this: You can find complete code along with the contextFormat() method definition at the end of the post. Let’s assume that value for the name property (that we want to put in the title attribute) of the first data item is “first tooltip”. So it consists of two words. When the replacement occurred, title attribute should contain the “first tooltip” text which we are going to see as a tooltip for the <a /> element. But let’s run the sample code in Internet Explorer and check it out. What you’ll see is that only the first word of the supposed “title” attribute’s content is shown. So, were is the rest of my attribute and what happened? The answer is obvious once you see the result of jQuery(“.sys-template”).html() line for the given HTML markup. In IE you’ll get the following <A id={id} class={cssClass} title={name} href="{source}" myAttr="{attr}">Link to {source}</A> See any difference between this HTML and the one shown earlier? No? Then look carefully. While the original HTML of the <a /> element is well-formed and all the attributes are correctly quoted, when you take the same HTML back in Internet Explorer (it doesn’t matter whether you use html() method from jQuery library or IE’s innerHTML directly), you lose attributes’ quotes for some of the attributes. Then, after replacement, we’ll get following HTML for our first data item. I marked the attribute value in question with italic: <A id=1 class=first title=first tooltip href="first.html" myAttr="firstAttr">Link to first.html</A> Now you can easily imagine for yourself what happens when this HTML is inserted into the document and why we do not see the second (and any subsequent words if any) of our title attribute in the tooltip. There are still two important things to note. The first one (and it actually the reason why I named the post “lazy wrapping” is that if value of the HTML attribute does contains spaces in the original HTML, then it WILL be wrapped with quotation marks. For example, if I wrote following on my page (note the trailing space for the title attribute value) <a href="{source}" title="{name} " id="{id}" myAttr="{attr}" class="{cssClass}">Link to {source}</a> then I would have my placeholder quoted correctly and the result of the replacement would render as expected: The second important thing to note is that there are exceptions for the lazy attributes wrapping rule in IE. As you can see href attribute value did not contain spaces exactly as all the other attributes with placeholders, but it was still returned correctly quoted Custom attribute myAttr is also quoted correctly when returned back from document, though its placeholder value does not contain spaces either. Now, on account of the highly unlikely probability that you found this information useful and need a solution to the problem the aforementioned behavior introduces for Internet Explorer browser, I can suggest a simple workaround – manually quote the mischievous attributes prior the placeholder pattern is replaced. Using the code of contextFormat() method shown below, you would need to add following line right before the return statement: result = result.replace(/=({([^}]+)})/g, '="$1"'); Below please find original sample code:

Read the article

Multiple country-specific domains or one global domain [closed]

- by CJM

Possible Duplicate: How should I structure my urls for both SEO and localization? My company currently has its main (English) site on a .com domain with a .co.uk alias. In addition, we have separate sites for certain other countries - these are also hosted in the UK but are distinct sites with a country-specific domain names (.de, .fr, .se, .es), and the sites have differing amounts of distinct but overlapping content, For example, the .es site is entirely in Spanish and has a page for every section of the UK site but little else. Whereas the .de site has much more content (but still less than the UK site), in German, and geared towards our business focus in that country. The main point is that the content in the additional sites is a subset of the UK, is translated into the local language, and although sometimes is simply only a translated version of UK content, it is usually 'tweaked' for the local market, and in certain areas, contains unique content. The other sites get a fraction of the traffic of the UK site. This is perfectly understandable since the biggest chunk of work comes from the UK, and we've been established here for over 30 years. However, we are wanting to build up our overseas business and part of that is building up our websites to support this. The Question: I posed a suggestion to the business that we might consider consolidating all our websites onto the .com domain but with /en/de/fr/se/etc sections, as plenty of other companies seem to do. The theory was that the non-english sites would benefit from the greater reputation of the parent .com domain, and that all the content would be mutually supporting - my fear is that the child domains on their own are too small to compete on their own compared to competitors who are established in these countries. Speaking to an SEO consultant from my hosting company, he feels that this move would have some benefit (for the reasons mentioned), but they would likely be significantly outweighed by the loss of the benefits of localised domains. Specifically, he said that since the Panda update, and particularly the two sets of changes this year, that we would lose more than we would gain. Having done some Panda research since, I've had my eyes opened on many issues, but curiously I haven't come across much that mentions localised domain names, though I do question whether Google would see it as duplicated content. It's not that I disagree with the consultant, I just want to know more before I make recommendations to my company. What is the prevailing opinion in this case? Would I gain anything from consolidating country-specific content onto one domain? Would Google see this as duplicate content? Would there be an even greater penalty from the loss of country-specific domains? And is there anything else I can do to help support the smaller, country-specific domains?

Read the article

C# Open Source software that is useful for learning Design Patterns

- by Fathom Savvy

In college I took a class in Expert Systems. The language the book taught (CLIPS) was esoteric - Expert Systems: Principles and Programming, Fourth Edition. I remember having a tough time with it. So, after almost failing the class, I needed to create the most awesome Expert System for my final presentation. I chose to create an expert system that would calculate risk analysis for a person's retirement portfolio. In short, the system would provide the services normally performed by one's financial adviser. In other words, based on personality, age, state of the macro economy, and other factors, should one's portfolio be conservative, moderate, or aggressive? In the appendix of the book (or on the CD-ROM), there was this in-depth example program for something unrelated to my presentation. Over my break, I read and re-read every line of that program until I understood it to the letter. Even though it was unrelated, I learned more than I ever could by reading all of the chapters. My presentation turned out to be pretty damn good and I received praises from my professor and classmates. So, the moral of the story is..., by understanding other people's code, you can gain greater insight into a language/paradigm than by reading canonical examples. Still, to this day, I am having trouble with everyday design patterns such as the Factory Pattern. I would like to know if anyone could recommend open source software that would help me understand the Gang of Four design patterns, at the very least. I have read the books, but I'm having trouble writing code for the concepts in the real world. Perhaps, by studying code used in today's real world applications, it might just "click". I realize a piece of software may only implement one kind of design pattern. But, if the pattern is an implementation you think is good for learning, and you know what pattern to look for within the source, I'm hoping you can tell me about it. For example, the System.Linq.Expressions namespace has a good example of the Visitor Pattern. The client calls Expression.Accept(new ExpressionVisitor()), which calls ExpressionVisitor (VisitExtension), which calls back to Expression (VisitChildren), which then calls Expression (Accept) again - wooah, kinda convoluted. The point to note here is that VisitChildren is a virtual method. Both Expression and those classes derived from Expression can implement the VisitChildren method any way they want. This means that one type of Expression can run code that is completely different from another type of derived Expression, even though the ExpressionVisitor class is the same in the Accept method. (As a side note Expression.Accept is also virtual). In the end, the code provides a real world example that you won't get in any book because it's kinda confusing. To summarize, If you know of any open source software that uses a design pattern implementation you were impressed by, please list it here. I'm sure it will help many others besides just me. public class VisitorPatternTest { public void Main() { Expression normalExpr = new Expression(); normalExpr.Accept(new ExpressionVisitor()); Expression binExpr = new BinaryExpression(); binExpr.Accept(new ExpressionVisitor()); } } public class Expression { protected internal virtual Expression Accept(ExpressionVisitor visitor) { return visitor.VisitExtension(this); } protected internal virtual Expression VisitChildren(ExpressionVisitor visitor) { if (!this.CanReduce) { throw Error.MustBeReducible(); } return visitor.Visit(this.ReduceAndCheck()); } public virtual Expression Visit(Expression node) { if (node != null) { return node.Accept(this); } return null; } public Expression ReduceAndCheck() { if (!this.CanReduce) { throw Error.MustBeReducible(); } Expression expression = this.Reduce(); if ((expression == null) || (expression == this)) { throw Error.MustReduceToDifferent(); } if (!TypeUtils.AreReferenceAssignable(this.Type, expression.Type)) { throw Error.ReducedNotCompatible(); } return expression; } } public class BinaryExpression : Expression { protected internal override Expression Accept(ExpressionVisitor visitor) { return visitor.VisitBinary(this); } protected internal override Expression VisitChildren(ExpressionVisitor visitor) { return CreateDummyExpression(); } protected internal Expression CreateDummyExpression() { Expression dummy = new Expression(); return dummy; } } public class ExpressionVisitor { public virtual Expression Visit(Expression node) { if (node != null) { return node.Accept(this); } return null; } protected internal virtual Expression VisitExtension(Expression node) { return node.VisitChildren(this); } protected internal virtual Expression VisitBinary(BinaryExpression node) { return ValidateBinary(node, node.Update(this.Visit(node.Left), this.VisitAndConvert<LambdaExpression>(node.Conversion, "VisitBinary"), this.Visit(node.Right))); } }

Read the article

How to Implement Single Sign-On between Websites

- by hmloo

Introduction Single sign-on (SSO) is a way to control access to multiple related but independent systems, a user only needs to log in once and gains access to all other systems. a lot of commercial systems that provide Single sign-on solution and you can also choose some open source solutions like Opensso, CAS etc. both of them use centralized authentication and provide more robust authentication mechanism, but if each system has its own authentication mechanism, how do we provide a seamless transition between them. Here I will show you the case. How it Works The method we’ll use is based on a secret key shared between the sites. Origin site has a method to build up a hashed authentication token with some other parameters and redirect the user to the target site. variables Status Description ssoEncode required hash(ssoSharedSecret + , + ssoTime + , + ssoUserName) ssoTime required timestamp with format YYYYMMDDHHMMSS used to prevent playback attacks ssoUserName required unique username; required when a user is logged in Note : The variables will be sent via POST for security reasons Building a Single Sign-On Solution Origin Site has function to 1. Create the URL for your Request. 2. Generate required authentication parameters 3. Redirect to target site. using System; using System.Web.Security; using System.Text; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { string postbackUrl = "http://www.targetsite.com/sso.aspx"; string ssoTime = DateTime.Now.ToString("yyyyMMddHHmmss"); string ssoUserName = User.Identity.Name; string ssoSharedSecret = "58ag;ai76"; // get this from config or similar string ssoHash = FormsAuthentication.HashPasswordForStoringInConfigFile(string.Format("{0},{1},{2}", ssoSharedSecret, ssoTime, ssoUserName), "md5"); string value = string.Format("{0}:{1},{2}", ssoHash,ssoTime, ssoUserName); Response.Clear(); StringBuilder sb = new StringBuilder(); sb.Append("<html>"); sb.AppendFormat(@"<body onload='document.forms[""form""].submit()'>"); sb.AppendFormat("<form name='form' action='{0}' method='post'>", postbackUrl); sb.AppendFormat("<input type='hidden' name='t' value='{0}'>", value); sb.Append("</form>"); sb.Append("</body>"); sb.Append("</html>"); Response.Write(sb.ToString()); Response.End(); } } Target Site has function to 1. Get authentication parameters. 2. Validate the parameters with shared secret. 3. If the user is valid, then do authenticate and redirect to target page. 4. If the user is invalid, then show errors and return. using System; using System.Web.Security; using System.Text; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { if (User.Identity.IsAuthenticated) { Response.Redirect("~/Default.aspx"); } } if (Request.Params.Get("t") != null) { string ticket = Request.Params.Get("t"); char[] delimiters = new char[] { ':', ',' }; string[] ssoVariable = ticket.Split(delimiters, StringSplitOptions.None); string ssoHash = ssoVariable[0]; string ssoTime = ssoVariable[1]; string ssoUserName = ssoVariable[2]; DateTime appTime = DateTime.MinValue; int offsetTime = 60; // get this from config or similar try { appTime = DateTime.ParseExact(ssoTime, "yyyyMMddHHmmss", null); } catch { //show error return; } if (Math.Abs(appTime.Subtract(DateTime.Now).TotalSeconds) > offsetTime) { //show error return; } bool isValid = false; string ssoSharedSecret = "58ag;ai76"; // get this from config or similar string hash = FormsAuthentication.HashPasswordForStoringInConfigFile(string.Format("{0},{1},{2}", ssoSharedSecret, ssoTime, ssoUserName), "md5"); if (string.Compare(ssoHash, hash, true) == 0) { if (Math.Abs(appTime.Subtract(DateTime.Now).TotalSeconds) > offsetTime) { //show error return; } else { isValid = true; } } if (isValid) { //Do authenticate; } else { //show error return; } } else { //show error } } } Summary This is a very simple and basic SSO solution, and its main advantage is its simplicity, only needs to add a single page to do SSO authentication, do not need to modify the existing system infrastructure.

Read the article

how to label a cuboid using open gl?

- by usha

hi this is how my 3dcuboid looks ,i have attached complete code , i want to label this cuboid using different name across sides how is it possible using opengl in android...plz help me out public class MyGLRenderer implements Renderer { Context context; Cuboid rect; private float mCubeRotation; // private static float angleCube = 0; // Rotational angle in degree for cube (NEW) // private static float speedCube = -1.5f; // Rotational speed for cube (NEW) public MyGLRenderer(Context context) { rect = new Cuboid(); this.context = context; } public void onDrawFrame(GL10 gl) { // TODO Auto-generated method stub gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glLoadIdentity(); // Reset the model-view matrix gl.glTranslatef(0.2f, 0.0f, -8.0f); // Translate right and into the screen gl.glScalef(0.8f, 0.8f, 0.8f); // Scale down (NEW) gl.glRotatef(mCubeRotation, 1.0f, 1.0f, 1.0f); // gl.glRotatef(angleCube, 1.0f, 1.0f, 1.0f); // rotate about the axis (1,1,1) (NEW) rect.draw(gl); mCubeRotation -= 0.15f; //angleCube += speedCube; } public void onSurfaceChanged(GL10 gl, int width, int height) { // TODO Auto-generated method stub if (height == 0) height = 1; // To prevent divide by zero float aspect = (float)width / height; // Set the viewport (display area) to cover the entire window gl.glViewport(0, 0, width, height); // Setup perspective projection, with aspect ratio matches viewport gl.glMatrixMode(GL10.GL_PROJECTION); // Select projection matrix gl.glLoadIdentity(); // Reset projection matrix // Use perspective projection GLU.gluPerspective(gl, 45, aspect, 0.1f, 100.f); gl.glMatrixMode(GL10.GL_MODELVIEW); // Select model-view matrix gl.glLoadIdentity(); // Reset } public void onSurfaceCreated(GL10 gl, EGLConfig config) { // TODO Auto-generated method stub gl.glClearColor(0.0f, 0.0f, 0.0f, 1.0f); // Set color's clear-value to black gl.glClearDepthf(1.0f); // Set depth's clear-value to farthest gl.glEnable(GL10.GL_DEPTH_TEST); // Enables depth-buffer for hidden surface removal gl.glDepthFunc(GL10.GL_LEQUAL); // The type of depth testing to do gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); // nice perspective view gl.glShadeModel(GL10.GL_SMOOTH); // Enable smooth shading of color gl.glDisable(GL10.GL_DITHER); // Disable dithering for better performance }} public class Cuboid{ private FloatBuffer mVertexBuffer; private FloatBuffer mColorBuffer; private ByteBuffer mIndexBuffer; private float vertices[] = { //width,height,depth -2.5f, -1.0f, -1.0f, 1.0f, -1.0f, -1.0f, 1.0f, 1.0f, -1.0f, -2.5f, 1.0f, -1.0f, -2.5f, -1.0f, 1.0f, 1.0f, -1.0f, 1.0f, 1.0f, 1.0f, 1.0f, -2.5f, 1.0f, 1.0f }; private float colors[] = { // R,G,B,A COLOR 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f, 1.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f, 1.0f, 0.0f, 1.0f, 1.0f }; private byte indices[] = { // VERTEX 0,1,2,3,4,5,6,7 REPRESENTATION FOR FACES 0, 4, 5, 0, 5, 1, 1, 5, 6, 1, 6, 2, 2, 6, 7, 2, 7, 3, 3, 7, 4, 3, 4, 0, 4, 7, 6, 4, 6, 5, 3, 0, 1, 3, 1, 2 }; public Cuboid() { ByteBuffer byteBuf = ByteBuffer.allocateDirect(vertices.length * 4); byteBuf.order(ByteOrder.nativeOrder()); mVertexBuffer = byteBuf.asFloatBuffer(); mVertexBuffer.put(vertices); mVertexBuffer.position(0); byteBuf = ByteBuffer.allocateDirect(colors.length * 4); byteBuf.order(ByteOrder.nativeOrder()); mColorBuffer = byteBuf.asFloatBuffer(); mColorBuffer.put(colors); mColorBuffer.position(0); mIndexBuffer = ByteBuffer.allocateDirect(indices.length); mIndexBuffer.put(indices); mIndexBuffer.position(0); } public void draw(GL10 gl) { gl.glFrontFace(GL10.GL_CW); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, mVertexBuffer); gl.glColorPointer(4, GL10.GL_FLOAT, 0, mColorBuffer); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_COLOR_ARRAY); gl.glDrawElements(GL10.GL_TRIANGLES, 36, GL10.GL_UNSIGNED_BYTE, mIndexBuffer); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_COLOR_ARRAY); } } public class Draw3drect extends Activity { private GLSurfaceView glView; // Use GLSurfaceView // Call back when the activity is started, to initialize the view @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); glView = new GLSurfaceView(this); // Allocate a GLSurfaceView glView.setRenderer(new MyGLRenderer(this)); // Use a custom renderer this.setContentView(glView); // This activity sets to GLSurfaceView } // Call back when the activity is going into the background @Override protected void onPause() { super.onPause(); glView.onPause(); } // Call back after onPause() @Override protected void onResume() { super.onResume(); glView.onResume(); } }

Read the article

How can I set up Friendly URL to Nginx?

- by MKK

I'm trying to use dokuwiki with its Friendly URL on Nginx. The problem that I'm facing is, it doesn' show correct path to any link(even stylesheet, and images) on every page It looks that paths are missing wiki/ part. If I click on the image and show its destination, it shows this url http://foo-sample.com/lib/tpl/dokuwiki/images/logo.png But it has to be this below. http://foo-sample.com/wiki/lib/tpl/dokuwiki/images/logo.png and login URL is not working either. If I click on login link, it takes me to http://foo-sample.com/wiki/start?do=login&sectok=ff7d4a68936033ed398a8b82ac9 and it says 404 Not Found I took a look at this https://www.dokuwiki.org/rewrite#nginx and tried as much as possible. However it still doesn't work. Here's my conf files. How can I fix this problem? dokuwiki is set in /usr/share/wiki /etc/nginx/conf.d/rails.conf upstream sample { ip_hash; server unix:/var/run/unicorn/unicorn_foo-sample.sock fail_timeout=0; } server { listen 80; server_name foo-sample.com; root /var/www/html/foo-sample/public; location /wiki { alias /usr/share/wiki; index doku.php; } location ~ ^/wiki.+\.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index doku.php; fastcgi_split_path_info ^/wiki(.+\.php)(.*)$; fastcgi_param SCRIPT_FILENAME /usr/share/wiki$fastcgi_script_name; include /etc/nginx/fastcgi_params; } } /usr/share/wiki/.htaccess ## Enable this to restrict editing to logged in users only ## You should disable Indexes and MultiViews either here or in the ## global config. Symlinks maybe needed for URL rewriting. #Options -Indexes -MultiViews +FollowSymLinks ## make sure nobody gets the htaccess files <Files ~ "^[\._]ht"> Order allow,deny Deny from all Satisfy All </Files> # Uncomment these rules if you want to have nice URLs using # $conf['userewrite'] = 1 - not needed for rewrite mode 2 # Not all installations will require the following line. If you do, # change "/dokuwiki" to the path to your dokuwiki directory relative # to your document root. # If you enable DokuWikis XML-RPC interface, you should consider to # restrict access to it over HTTPS only! Uncomment the following two # rules if your server setup allows HTTPS. RewriteCond %{HTTPS} !=on RewriteRule ^lib/exe/xmlrpc.php$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R=301] <IfModule mod_geoip.c> GeoIPEnable On Order deny,allow deny from all SetEnvIf GEOIP_COUNTRY_CODE JP AllowCountry Allow from .googlebot.com Allow from .yahoo.net Allow from .msn.com Allow from env=AllowCountry </IfModule>

Read the article

OOF checklist

- by Daniel Moth

When going on vacation or otherwise being out of office (known as OOF in Microsoft), it is polite and professional that our absence creates the minimum disruption possible to the rest of the business, and especially our colleagues. Below is my OOF checklist - I try to do these as soon as I know I'll be OOF, rather than leave it for the night before. Let the relevant folks on the team know the planned dates of absence and check if anybody was expecting something from you during that timeframe. Reset expectations with them, and as applicable try to find another owner for individual activities that cannot wait. Go through your calendar for the OOF period and decline every meeting occurrence so the owner of the meeting knows that you won't be attending (similar to my post about responding to invites). If it is your meeting cancel it so that people don’t turn up without the meeting organizer being there. Do this even for meetings were the folks should know due to step #1. Over-communicating is a good thing here and keeps calendars all around up to date. Enter your OOF dates in whatever tool your company uses. Typically that is the notification to your manager. In your Outlook calendar, create a local Appointment (don't invite anyone) for the date range (All day event) setting the "Show As" dropdown to "Out of Office". This way, people won’t try to schedule meetings with you on that day. If you use Lync, set the status to "Off Work" for that period. If you won't be responding to email (which when on your vacation you definitely shouldn't) then in Outlook setup "Automatic Replies (Out of Office)" for that period. This way people won’t think you are rude when not replying to their emails. In your OOF message point to an alias (ideally of many people) as a fallback for urgent queries. If you want to proactively notify individuals of your OOFage then schedule and send a multi-day meeting request for the entire period. Remember to set the "Show As" to "Free" (so their calendar doesn’t show busy/oof to others), set the "Reminder" to "None" (so they don’t get a reminder about it), set "Low Importance", and uncheck both "Response Options" so if they don't want this on their calendar, it is just one click for them to get rid of it. Aside: I have another post with advice on sending invites. If you care about people who would not observe the above but could drop by your office, stick a physical OOF note at your office door or chair/monitor or desk. Have I missed any? Comments about this post by Daniel Moth welcome at the original blog.

Read the article

How to break out of if statement

- by TheBroodian

I'm not sure if the title is exactly an accurate representation of what I'm actually trying to ask, but that was the best I could think of. I am experiencing an issue with my character class. I have developed a system so that he can perform chain attacks, and something that was important to me was that 1)button presses during the process of an attack wouldn't interrupt the character, and 2) at the same time, button presses should be stored so that the player can smoothly queue up chain attacks in the middle of one so that gameplay doesn't feel rigid or unresponsive. This all begins when the player presses the punch button. Upon pressing the punch button, the game checks the state of the dpad at the moment of the button press, and then translates the resulting combined buttons into an int which I use as an enumerator relating to a punch method for the character. The enumerator is placed into a List so that the next time the character's Update() method is called, it will execute the next punch in the list. It only executes the next punch if my character is flagged with acceptInput as true. All attacks flag acceptInput as false, to prevent the interruption of attacks, and then at the end of an attack, acceptInput is set back to true. While accepting input, all other actions are polled for, i.e. jumping, running, etc. In runtime, if I attack, and then queue up another attack behind it (by pressing forward+punch) I can see the second attack visibly execute, which should flag acceptInput as false, yet it gets interrupted and my character will stop punching and start running if I am still holding down the dpad. Included is some code for context. This is the input region for my character. //Placed this outside the if (acceptInput) tree because I want it //to be taken into account whether we are accepting input or not. //This will queue up attacks, which will only be executed if we are accepting input. //This creates a desired effect that helps control the character in a // smoother fashion for the player. if (Input.justPressed(buttonManager.Punch)) { int dpadPressed = Input.DpadState(0); if (attackBuffer.Count() < 1) { attackBuffer.Add(CheckPunch(dpadPressed)); } else { attackBuffer.Clear(); attackBuffer.Add(CheckPunch(dpadPressed)); } } if (acceptInput) { if (attackBuffer.Count() > 0) { ExecutePunch(attackBuffer[0]); attackBuffer.RemoveAt(0); } //If D-Pad left is being held down. if (Input.DpadDirectionHeld(0, buttonManager.Left)) { flipped = false; if (onGround) { newAnimation = "run"; } velocity = new Vector2(velocity.X - acceleration, velocity.Y); if (walking == true && velocity.X <= -walkSpeed) { velocity.X = -walkSpeed; } else if (walking == false && velocity.X <= -maxSpeed) { velocity.X = -maxSpeed; } } //If D-Pad right is being held down. if (Input.DpadDirectionHeld(0, buttonManager.Right)) { flipped = true; if (onGround) { newAnimation = "run"; } velocity = new Vector2(velocity.X + acceleration, velocity.Y); if (walking == true && velocity.X >= walkSpeed) { velocity.X = walkSpeed; } else if (walking == false && velocity.X >= maxSpeed) { velocity.X = maxSpeed; } } //If jump/accept button is pressed. if (Input.justPressed(buttonManager.JumpAccept)) { if (onGround) { Jump(); } } //If toggle element next button is pressed. if (Input.justPressed(buttonManager.ToggleElementNext)) { if (elements.Count != 0) { elementInUse++; if (elementInUse >= elements.Count) { elementInUse = 0; } } } //If toggle element last button is pressed. if (Input.justPressed(buttonManager.ToggleElementLast)) { if (elements.Count != 0) { elementInUse--; if (elementInUse < 0) { elementInUse = Convert.ToSByte(elements.Count() - 1); } } } //If character is in the process of jumping. if (jumping == true) { if (Input.heldDown(buttonManager.JumpAccept)) { velocity.Y -= fallSpeed.Y; maxJumpTime -= elapsed; } if (Input.justReleased(buttonManager.JumpAccept) || maxJumpTime <= 0) { jumping = false; maxJumpTime = 0; } } //Won't execute abilities if input isn't being accepted. foreach (PlayerAbility ability in playerAbilities) { if (buffer.Matches(ability)) { if (onGround) { ability.Activate(); } if (!onGround && ability.UsableInAir) { ability.Activate(); } else if (!onGround && !ability.UsableInAir) { buffer.Clear(); } } } } When the attackBuffer calls ExecutePunch(int) method, ExecutePunch() will call one of the following methods: private void NeutralPunch1() //0 { acceptInput = false; busy = true; newAnimation = "punch1"; numberOfAttacks++; timeSinceLastAttack = 0; } private void ForwardPunch2(bool toLeft) //true == 7, false == 4 { forwardPunch2Timer = 0f; acceptInput = false; busy = true; newAnimation = "punch2begin"; numberOfAttacks++; timeSinceLastAttack = 0; if (toLeft) { velocity.X -= 800; } if (!toLeft) { velocity.X += 800; } } I assume the attack is being interrupted due to the fact that ExecutePunch() is in the same if statement as running, but I haven't been able to find a suitable way to stop this happening. Thank you ahead of time for reading this, I apologize for it having become so long winded.

Read the article

Building an ASP.Net 4.5 Web forms application - part 4

- by nikolaosk

?his is the fourth post in a series of posts on how to design and implement an ASP.Net 4.5 Web Forms store that sells posters on line.There are 3 more posts in this series of posts.Please make sure you read them first.You can find the first post here. You can find the second post here. You can find the third post here. In this new post we will build on the previous posts and we will demonstrate how to display the posters per category.We will add a ListView control on the PosterList.aspx and will bind data from the database. We will use the various templates.Then we will write code in the PosterList.aspx.cs to fetch data from the database.1) Launch Visual Studio and open your solution where your project lives2) Open the PosterList.aspx page. We will add some markup in this page. Have a look at the code below <section class="posters-featured"> <ul> <asp:ListView ID="posterList" runat="server" DataKeyNames="PosterID" GroupItemCount="3" ItemType="PostersOnLine.DAL.Poster" SelectMethod="GetPosters"> <EmptyDataTemplate> <table id="Table1" runat="server"> <tr> <td>We have no data.</td> </tr> </table> </EmptyDataTemplate> <EmptyItemTemplate> <td id="Td1" runat="server" /> </EmptyItemTemplate> <GroupTemplate> <tr ID="itemPlaceholderContainer" runat="server"> <td ID="itemPlaceholder" runat="server"></td> </tr> </GroupTemplate> <ItemTemplate> <td id="Td2" runat="server"> <table> <tr> <td> </td> <td> <a href="PosterDetails.aspx?posterID=<%#:Item.PosterID%>"> <img src="<%#:Item.PosterImgpath%>" width="100" height="75" border="1"/></a> </td> <td> <a href="PosterDetails.aspx?posterID=<%#:Item.PosterID%>"> <span class="PosterName"> <%#:Item.PosterName%> </span> </a> <br /> <span class="PosterPrice"> <b>Price: </b><%#:String.Format("{0:c}", Item.PosterPrice)%> </span> <br /> </td> </tr> </table> </td> </ItemTemplate> <LayoutTemplate> <table id="Table2" runat="server"> <tr id="Tr1" runat="server"> <td id="Td3" runat="server"> <table ID="groupPlaceholderContainer" runat="server"> <tr ID="groupPlaceholder" runat="server"></tr> </table> </td> </tr> <tr id="Tr2" runat="server"><td id="Td4" runat="server"></td></tr> </table> </LayoutTemplate> </asp:ListView> </ul> </section> 3) We have a ListView control on the page called PosterList. I set the ItemType property to the Poster class and then the SelectMethod to the GetPosters method. I will create this method later on. (ItemType="PostersOnLine.DAL.Poster" SelectMethod="GetPosters")Then in the code below I have the data-binding expression Item available and the control becomes strongly typed.So when the user clicks on the link of the poster's category the relevant information will be displayed (photo,name and price) <td> <a href="PosterDetails.aspx?posterID=<%#:Item.PosterID%>"> <img src="<%#:Item.PosterImgpath%>" width="100" height="75" border="1"/></a> </td>4) Now we need to write the simple method to populate the ListView control.It is called GetPosters method.The code follows public IQueryable<Poster> GetPosters([QueryString("id")] int? PosterCatID) { PosterContext ctx = new PosterContext(); IQueryable<Poster> query = ctx.Posters; if (PosterCatID.HasValue && PosterCatID > 0) { query = query.Where(p=>p.PosterCategoryID==PosterCatID); } return query; } This is a very simple method that returns information about posters related to the PosterCatID passed to it.I bind the value from the query string to the PosterCatID parameter at run time.This is all possible due to the QueryStringAttribute class that lives inside the System.Web.ModelBinding and gets the value of the query string variable id.5) I run my application and then click on the "Midfilders" link. Have a look at the picture below to see the results. In the Site.css file I added some new CSS rules to make everything more presentable. .posters-featured { width:840px; background-color:#efefef;}.posters-featured a:link, a:visited, a:active, a:hover { color: #000033; }.posters-featured a:hover { background-color: #85c465; } 6) I run the application again and this time I do not choose any category, I simply navigate to the PosterList.aspx page. I see all the posters since no query string was passed as a parameter.Have a look at the picture below ?ake sure you place breakpoints in the code so you can see what is really going on.In the next post I will show you how to display poster details.Hope it helps!!!

Read the article

MOSSLover Lives On…

- by MOSSLover

A while back, maybe 6 months, I got some bad news about 2010. Microsoft was removing Office from the MOSS equivalent of 2010, so basically my alias would be obsolete the second 2010 caught on in the community. I thought about it for some time. I had some discussions with friends in the community. I even noticed that the MOSSMan changed his twitter id. I started my blog around a WSS 3.0 project when I worked for LRS in there St. Louis Office in February/March 2007. So I think it’s fitting to keep the name, because my community involvement centers around 2007. My first ever speaking ordeal was at the Kansas City Office Geeks meeting in November of 2007 on Disaster Recovery where about three people attended. The first user group meeting I ever attended was around the month of June 2007 at the KC .Net User Group about two weeks after my braces were installed. It’s definitely fitting to say that 2007 paved the way for everything that happened in the past 2/2 1/2 years. If anyone asks what MOSSLover means I added a description on twitter and I also added my name. I added my name for other reasons, because I’m sick of people thinking I am the guy in the photo. Also, I’d like people to recognize me for who I am. Everyone should expect less of the hat in the upcoming year and more of my hair. I’ve taken a vow to wear the hat less and less this year. I am sick of buying hats, plus I want to move forward to gain more self confidence. The hat does not really help. I will still wear a t-shirt and jeans in most of my presentations. That is who I am and it will not change any time soon. If you expect to see me in a skirt good luck with that as it won’t be happening unless I am forced at gun point. I hope you guys have a good weekend. Later all… Technorati Tags: MOSSLover,Cardinal's Hat,Becky Isserman

Read the article

Custom page sizes in paging dropdown in Telerik RadGrid

Working with Telerik RadControls for ASP.NET AJAX is actually quite easy and the initial effort to get started with the control suite is very low. Meaning that you can easily get good result with little time. But there are usually cases where you have to go a little further and dig a little bit deeper than the standard scenarios. In this article I am going to describe how you can customize the default values (10, 20 and 50) of the drop-down list in the paging element of RadGrid. Get control over the displayed page sizes while using numeric paging... The default page sizes are good but not always good enough The paging feature in RadGrid offers you 3, well actually 4, possible page sizes in the drop-down element out-of-the box, which are 10, 20 or 50 items. You can get a fourth option by specifying a value different than the three standards for the PageSize attribute, ie. 35 or 100. The drawback in that case is that it is the initial page size. Certainly, the available choices could be more flexible or even a little bit more intelligent. For example, by taking the total count of records into consideration. There are some interesting scenarios that would justify a customized page size element: A low number of records, like 14 or similar shouldn't provide a page size of 50, A high total count of records (ie: 300+) should offer more choices, ie: 100, 200, 500, or display of all records regardless of number of records I am sure that you might have your own requirements, and I hope that the following source code snippets might be helpful. Wiring the ItemCreated event In order to adjust and manipulate the existing RadComboBox in the paging element we have to handle the OnItemCreated event of RadGrid. Simply specify your code behind method in the attribute of the RadGrid tag, like so: <telerik:RadGrid ID="RadGridLive" runat="server" AllowPaging="true" PageSize="20" AllowSorting="true" AutoGenerateColumns="false" OnNeedDataSource="RadGridLive_NeedDataSource" OnItemDataBound="RadGrid_ItemDataBound" OnItemCreated="RadGrid_ItemCreated"> <ClientSettings EnableRowHoverStyle="true"> <ClientEvents OnRowCreated="RowCreated" OnRowSelected="RowSelected" /> <Resizing AllowColumnResize="True" AllowRowResize="false" ResizeGridOnColumnResize="false" ClipCellContentOnResize="true" EnableRealTimeResize="false" AllowResizeToFit="true" /> <Scrolling AllowScroll="true" ScrollHeight="360px" UseStaticHeaders="true" SaveScrollPosition="true" /> <Selecting AllowRowSelect="true" /> </ClientSettings> <MasterTableView DataKeyNames="AdvertID"> <PagerStyle AlwaysVisible="true" Mode="NextPrevAndNumeric" /> <Columns> <telerik:GridBoundColumn HeaderText="Listing ID" DataField="AdvertID" DataType="System.Int32" SortExpression="AdvertID" UniqueName="AdvertID"> <HeaderStyle Width="66px" /> </telerik:GridBoundColumn>  </Columns> </MasterTableView></telerik:RadGrid> To provide a consistent experience for your visitors it might be helpful to display the page size selection always. This is done by setting the AlwaysVisible attribute of the PagerStyle element to true, like highlighted above. Customize the values of page size Your delegate method for the ItemCreated event should look like this: protected void RadGrid_ItemCreated(object sender, GridItemEventArgs e){ if (e.Item is GridPagerItem) { var dropDown = (RadComboBox)e.Item.FindControl("PageSizeComboBox"); var totalCount = ((GridPagerItem)e.Item).Paging.DataSourceCount; var sizes = new Dictionary<string, string>() { {"10", "10"}, {"20", "20"}, {"50", "50"} }; if (totalCount > 100) { sizes.Add("100", "100"); } if (totalCount > 200) { sizes.Add("200", "200"); } sizes.Add("All", totalCount.ToString()); dropDown.Items.Clear(); foreach (var size in sizes) { var cboItem = new RadComboBoxItem() { Text = size.Key, Value = size.Value }; cboItem.Attributes.Add("ownerTableViewId", e.Item.OwnerTableView.ClientID); dropDown.Items.Add(cboItem); } dropDown.FindItemByValue(e.Item.OwnerTableView.PageSize.ToString()).Selected = true; }} It is important that we explicitly check the event arguments for GridPagerItem as it is the control that contains the PageSizeComboBox control that we want to manipulate. To keep the actual modification and exposure of possible page size values flexible I am filling a Dictionary with the requested 'key/value'-pairs based on the number of total records displayed in the grid. As a final step, ensure that the previously selected value is the active one using the FindItemByValue() method. Of course, there might be different requirements but I hope that the snippet above provide a first insight into customized page size value in Telerik's Grid. The Grid demos describe a more advanced approach to customize the Pager.

Read the article

Collaborative Whiteboard using WebSocket in GlassFish 4 - Text/JSON and Binary/ArrayBuffer Data Transfer (TOTD #189)

- by arungupta

This blog has published a few blogs on using JSR 356 Reference Implementation (Tyrus) as its integrated in GlassFish 4 promoted builds. TOTD #183: Getting Started with WebSocket in GlassFish TOTD #184: Logging WebSocket Frames using Chrome Developer Tools, Net-internals and Wireshark TOTD #185: Processing Text and Binary (Blob, ArrayBuffer, ArrayBufferView) Payload in WebSocket TOTD #186: Custom Text and Binary Payloads using WebSocket One of the typical usecase for WebSocket is online collaborative games. This Tip Of The Day (TOTD) explains a sample that can be used to build such games easily. The application is a collaborative whiteboard where different shapes can be drawn in multiple colors. The shapes drawn on one browser are automatically drawn on all other peer browsers that are connected to the same endpoint. The shape, color, and coordinates of the image are transfered using a JSON structure. A browser may opt-out of sharing the figures. Alternatively any browser can send a snapshot of their existing whiteboard to all other browsers. Take a look at this video to understand how the application work and the underlying code. The complete sample code can be downloaded here. The code behind the application is also explained below. The web page (index.jsp) has a HTML5 Canvas as shown: <canvas id="myCanvas" width="150" height="150" style="border:1px solid #000000;"></canvas> And some radio buttons to choose the color and shape. By default, the shape, color, and coordinates of any figure drawn on the canvas are put in a JSON structure and sent as a message to the WebSocket endpoint. The JSON structure looks like: { "shape": "square", "color": "#FF0000", "coords": { "x": 31.59999942779541, "y": 49.91999053955078 }} The endpoint definition looks like: @WebSocketEndpoint(value = "websocket",encoders = {FigureDecoderEncoder.class},decoders = {FigureDecoderEncoder.class})public class Whiteboard { As you can see, the endpoint has decoder and encoder registered that decodes JSON to a Figure (a POJO class) and vice versa respectively. The decode method looks like: public Figure decode(String string) throws DecodeException { try { JSONObject jsonObject = new JSONObject(string); return new Figure(jsonObject); } catch (JSONException ex) { throw new DecodeException("Error parsing JSON", ex.getMessage(), ex.fillInStackTrace()); }} And the encode method looks like: public String encode(Figure figure) throws EncodeException { return figure.getJson().toString();} FigureDecoderEncoder implements both decoder and encoder functionality but thats purely for convenience. But the recommended design pattern is to keep them in separate classes. In certain cases, you may even need only one of them. On the client-side, the Canvas is initialized as: var canvas = document.getElementById("myCanvas");var context = canvas.getContext("2d");canvas.addEventListener("click", defineImage, false); The defineImage method constructs the JSON structure as shown above and sends it to the endpoint using websocket.send(). An instant snapshot of the canvas is sent using binary transfer with WebSocket. The WebSocket is initialized as: var wsUri = "ws://localhost:8080/whiteboard/websocket";var websocket = new WebSocket(wsUri);websocket.binaryType = "arraybuffer"; The important part is to set the binaryType property of WebSocket to arraybuffer. This ensures that any binary transfers using WebSocket are done using ArrayBuffer as the default type seem to be blob. The actual binary data transfer is done using the following: var image = context.getImageData(0, 0, canvas.width, canvas.height);var buffer = new ArrayBuffer(image.data.length);var bytes = new Uint8Array(buffer);for (var i=0; i<bytes.length; i++) { bytes[i] = image.data[i];}websocket.send(bytes); This comprehensive sample shows the following features of JSR 356 API: Annotation-driven endpoints Send/receive text and binary payload in WebSocket Encoders/decoders for custom text payload In addition, it also shows how images can be captured and drawn using HTML5 Canvas in a JSP. How could this be turned in to an online game ? Imagine drawing a Tic-tac-toe board on the canvas with two players playing and others watching. Then you can build access rights and controls within the application itself. Instead of sending a snapshot of the canvas on demand, a new peer joining the game could be automatically transferred the current state as well. Do you want to build this game ? I built a similar game a few years ago. Do somebody want to rewrite the game using WebSocket APIs ? :-) Many thanks to Jitu and Akshay for helping through the WebSocket internals! Here are some references for you: JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) Subsequent blogs will discuss the following topics (not necessary in that order) ... Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API

Read the article

June 2013 release of SSDT contains a minor bug that you should be aware of

- by jamiet

I have discovered what seems, to me, like a bug in the June 2013 release of SSDT and given the problems that it created yesterday on my current gig I thought it prudent to write this blog post to inform people of it. I’ve built a very simple SSDT project to reproduce the problem that has just two tables, [Table1] and [Table2], and also a procedure [Procedure1]: The two tables have exactly the same definition, both a have a single column called [Id] of type integer. CREATE TABLE [dbo].[Table1] ( [Id] INT NOT NULL PRIMARY KEY ) My stored procedure simply joins the two together, orders them by the column used in the join predicate, and returns the results: CREATE PROCEDURE [dbo].[Procedure1] AS SELECT t1.* FROM Table1 t1 INNER JOIN Table2 t2 ON t1.Id = t2.Id ORDER BY Id Now if I create those three objects manually and then execute the stored procedure, it works fine: So we know that the code works. Unfortunately, SSDT thinks that there is an error here: The text of that error is: Procedure: [dbo].[Procedure1] contains an unresolved reference to an object. Either the object does not exist or the reference is ambiguous because it could refer to any of the following objects: [dbo].[Table1].[Id] or [dbo].[Table2].[Id]. Its complaining that the [Id] field in the ORDER BY clause is ambiguous. Now you may well be thinking at this point “OK, just stick a table alias into the ORDER BY predicate and everything will be fine!” Well that’s true, but there’s a bigger problem here. One of the developers at my current client installed this drop of SSDT and all of a sudden all the builds started failing on his machine – he had errors left right and centre because, as it transpires, we have a fair bit of code that exhibits this scenario. Worse, previous installations of SSDT do not flag this code as erroneous and therein lies the rub. We immediately had a mass panic where we had to run around the department to our developers (of which there are many) ensuring that none of them should upgrade their SSDT installation if they wanted to carry on being productive for the rest of the day. Also bear in mind that as soon as a new drop of SSDT comes out then the previous version is instantly unavailable so rolling back is going to be impossible unless you have created an administrative install of SSDT for that previous version. Just thought you should know! In the grand schema of things this isn’t a big deal as the bug can be worked around with a simple code modification but forewarned is forearmed so they say! Last thing to say, if you want to know which version of SSDT you are running check my blog post Which version of SSDT Database Projects do I have installed? @Jamiet

Read the article

How to move a rectangle properly?

- by bodycountPP

I recently started to learn OpenGL. Right now I finished the first chapter of the "OpenGL SuperBible". There were two examples. The first had the complete code and showed how to draw a simple triangle. The second example is supposed to show how to move a rectangle using SpecialKeys. The only code provided for this example was the SpecialKeys method. I still tried to implement it but I had two problems. In the previous example I declared and instaciated vVerts in the SetupRC() method. Now as it is also used in the SpecialKeys() method, I moved the declaration and instantiation to the top of the code. Is this proper c++ practice? I copied the part where vertex positions are recalculated from the book, but I had to pick the vertices for the rectangle on my own. So now every time I press a key for the first time the rectangle's upper left vertex is moved to (-0,5:-0.5). This ok because of GLfloat blockX = vVerts[0]; //Upper left X GLfloat blockY = vVerts[7]; // Upper left Y But I also think that this is the reason why my rectangle is shifted in the beginning. After the first time a key was pressed everything works just fine. Here is my complete code I hope you can help me on those two points. GLBatch squareBatch; GLShaderManager shaderManager; //Load up a triangle GLfloat vVerts[] = {-0.5f,0.5f,0.0f, 0.5f,0.5f,0.0f, 0.5f,-0.5f,0.0f, -0.5f,-0.5f,0.0f}; //Window has changed size, or has just been created. //We need to use the window dimensions to set the viewport and the projection matrix. void ChangeSize(int w, int h) { glViewport(0,0,w,h); } //Called to draw the scene. void RenderScene(void) { //Clear the window with the current clearing color glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT|GL_STENCIL_BUFFER_BIT); GLfloat vRed[] = {1.0f,0.0f,0.0f,1.0f}; shaderManager.UseStockShader(GLT_SHADER_IDENTITY,vRed); squareBatch.Draw(); //perform the buffer swap to display the back buffer glutSwapBuffers(); } //This function does any needed initialization on the rendering context. //This is the first opportunity to do any OpenGL related Tasks. void SetupRC() { //Blue Background glClearColor(0.0f,0.0f,1.0f,1.0f); shaderManager.InitializeStockShaders(); squareBatch.Begin(GL_QUADS,4); squareBatch.CopyVertexData3f(vVerts); squareBatch.End(); } //Respond to arrow keys by moving the camera frame of reference void SpecialKeys(int key,int x,int y) { GLfloat stepSize = 0.025f; GLfloat blockSize = 0.5f; GLfloat blockX = vVerts[0]; //Upper left X GLfloat blockY = vVerts[7]; // Upper left Y if(key == GLUT_KEY_UP) { blockY += stepSize; } if(key == GLUT_KEY_DOWN){blockY -= stepSize;} if(key == GLUT_KEY_LEFT){blockX -= stepSize;} if(key == GLUT_KEY_RIGHT){blockX += stepSize;} //Recalculate vertex positions vVerts[0] = blockX; vVerts[1] = blockY - blockSize*2; vVerts[3] = blockX + blockSize * 2; vVerts[4] = blockY - blockSize *2; vVerts[6] = blockX+blockSize*2; vVerts[7] = blockY; vVerts[9] = blockX; vVerts[10] = blockY; squareBatch.CopyVertexData3f(vVerts); glutPostRedisplay(); } //Main entry point for GLUT based programs int main(int argc, char** argv) { //Sets the working directory. Not really needed gltSetWorkingDirectory(argv[0]); //Passes along the command-line parameters and initializes the GLUT library. glutInit(&argc,argv); //Tells the GLUT library what type of display mode to use, when creating the window. //Double buffered window, RGBA-Color mode,depth-buffer as part of our display, stencil buffer also available glutInitDisplayMode(GLUT_DOUBLE|GLUT_RGBA|GLUT_DEPTH|GLUT_STENCIL); //Window size glutInitWindowSize(800,600); glutCreateWindow("MoveRect"); glutReshapeFunc(ChangeSize); glutDisplayFunc(RenderScene); glutSpecialFunc(SpecialKeys); //initialize GLEW library GLenum err = glewInit(); //Check that nothing goes wrong with the driver initialization before we try and do any rendering. if(GLEW_OK != err) { fprintf(stderr,"Glew Error: %s\n",glewGetErrorString); return 1; } SetupRC(); glutMainLoop(); return 0; }

Read the article

ASP.Net MVC 2 Auto Complete Textbox With Custom View Model Attribute & EditorTemplate

- by SeanMcAlinden

In this post I’m going to show how to create a generic, ajax driven Auto Complete text box using the new MVC 2 Templates and the jQuery UI library. The template will be automatically displayed when a property is decorated with a custom attribute within the view model. The AutoComplete text box in action will look like the following: The first thing to do is to do is visit my previous blog post to put the custom model metadata provider in place, this is necessary when using custom attributes on the view model. http://weblogs.asp.net/seanmcalinden/archive/2010/06/11/custom-asp-net-mvc-2-modelmetadataprovider-for-using-custom-view-model-attributes.aspx Once this is in place, make sure you visit the jQuery UI and download the latest stable release – in this example I’m using version 1.8.2. You can download it here. Add the jQuery scripts and css theme to your project and add references to them in your master page. Should look something like the following: Site.Master <head runat="server"> <title><asp:ContentPlaceHolder ID="TitleContent" runat="server" /></title> <link href="../../Content/Site.css" rel="stylesheet" type="text/css" /> <link href="../../css/ui-lightness/jquery-ui-1.8.2.custom.css" rel="stylesheet" type="text/css" /> <script src="../../Scripts/jquery-1.4.2.min.js" type="text/javascript"></script> <script src="../../Scripts/jquery-ui-1.8.2.custom.min.js" type="text/javascript"></script> </head> Once this is place we can get started. Creating the AutoComplete Custom Attribute The auto complete attribute will derive from the abstract MetadataAttribute created in my previous post. It will look like the following: AutoCompleteAttribute using System.Collections.Generic; using System.Web.Mvc; using System.Web.Routing; namespace Mvc2Templates.Attributes { public class AutoCompleteAttribute : MetadataAttribute { public RouteValueDictionary RouteValueDictionary; public AutoCompleteAttribute(string controller, string action, string parameterName) { this.RouteValueDictionary = new RouteValueDictionary(); this.RouteValueDictionary.Add("Controller", controller); this.RouteValueDictionary.Add("Action", action); this.RouteValueDictionary.Add(parameterName, string.Empty); } public override void Process(ModelMetadata modelMetaData) { modelMetaData.AdditionalValues.Add("AutoCompleteUrlData", this.RouteValueDictionary); modelMetaData.TemplateHint = "AutoComplete"; } } } As you can see, the constructor takes in strings for the controller, action and parameter name. The parameter name will be used for passing the search text within the auto complete text box. The constructor then creates a new RouteValueDictionary which we will use later to construct the url for getting the auto complete results via ajax. The main interesting method is the method override called Process. With the process method, the route value dictionary is added to the modelMetaData AdditionalValues collection. The TemplateHint is also set to AutoComplete, this means that when the view model is parsed for display, the MVC 2 framework will look for a view user control template called AutoComplete, if it finds one, it uses that template to display the property. The View Model To show you how the attribute will look, this is the view model I have used in my example which can be downloaded at the end of this post. View Model using System.ComponentModel; using Mvc2Templates.Attributes; namespace Mvc2Templates.Models { public class TemplateDemoViewModel { [AutoComplete("Home", "AutoCompleteResult", "searchText")] [DisplayName("European Country Search")] public string SearchText { get; set; } } } As you can see, the auto complete attribute is called with the controller name, action name and the name of the action parameter that the search text will be passed into. The AutoComplete Template Now all of this is in place, it’s time to create the AutoComplete template. Create a ViewUserControl called AutoComplete.ascx at the following location within your application – Views/Shared/EditorTemplates/AutoComplete.ascx Add the following code: AutoComplete.ascx <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> <% var propertyName = ViewData.ModelMetadata.PropertyName; var propertyValue = ViewData.ModelMetadata.Model; var id = Guid.NewGuid().ToString(); RouteValueDictionary urlData = (RouteValueDictionary)ViewData.ModelMetadata.AdditionalValues.Where(x => x.Key == "AutoCompleteUrlData").Single().Value; var url = Mvc2Templates.Views.Shared.Helpers.RouteHelper.GetUrl(this.ViewContext.RequestContext, urlData); %> <input type="text" name="<%= propertyName %>" value="<%= propertyValue %>" id="<%= id %>" class="autoComplete" /> <script type="text/javascript"> $(function () { $("#<%= id %>").autocomplete({ source: function (request, response) { $.ajax({ url: "<%= url %>" + request.term, dataType: "json", success: function (data) { response(data); } }); }, minLength: 2 }); }); </script> There is a lot going on in here but when you break it down it’s quite simple. Firstly, the property name and property value are retrieved through the model meta data. These are required to ensure that the text box input has the correct name and data to allow for model binding. If you look at line 14 you can see them being used in the text box input creation. The interesting bit is on line 8 and 9, this is the code to retrieve the route value dictionary we added into the model metada via the custom attribute. Line 11 is used to create the url, in order to do this I created a quick helper class which looks like the code below titled RouteHelper. The last bit of script is the code to initialise the jQuery UI AutoComplete control with the correct url for calling back to our controller action. RouteHelper using System.Web.Mvc; using System.Web.Routing; namespace Mvc2Templates.Views.Shared.Helpers { public static class RouteHelper { const string Controller = "Controller"; const string Action = "Action"; const string ReplaceFormatString = "REPLACE{0}"; public static string GetUrl(RequestContext requestContext, RouteValueDictionary routeValueDictionary) { RouteValueDictionary urlData = new RouteValueDictionary(); UrlHelper urlHelper = new UrlHelper(requestContext); int i = 0; foreach(var item in routeValueDictionary) { if (item.Value == string.Empty) { i++; urlData.Add(item.Key, string.Format(ReplaceFormatString, i.ToString())); } else { urlData.Add(item.Key, item.Value); } } var url = urlHelper.RouteUrl(urlData); for (int index = 1; index <= i; index++) { url = url.Replace(string.Format(ReplaceFormatString, index.ToString()), string.Empty); } return url; } } } See it in action All you need to do to see it in action is pass a view model from your controller with the new AutoComplete attribute attached and call the following within your view: <%= this.Html.EditorForModel() %> NOTE: The jQuery UI auto complete control expects a JSON string returned from your controller action method… as you can’t use the JsonResult to perform GET requests, use a normal action result, convert your data into json and return it as a string via a ContentResult. If you download the solution it will be very clear how to handle the controller and action for this demo. The full source code for this post can be downloaded here. It has been developed using MVC 2 and Visual Studio 2010. As always, I hope this has been interesting/useful. Kind Regards, Sean McAlinden.

Read the article

CodePlex Daily Summary for Thursday, March 01, 2012

CodePlex Daily Summary for Thursday, March 01, 2012Popular ReleasesMetodología General Ajustada - MGA: 01.09.08: Cambios John: Cambios en el MDI: Habilitación del menú e ícono de Imprimir. Deshabilitación de menú Ayuda y opciones de Importar y Exportar del menú Proyectos temporalmente. Integración con código de Crystal Report. Validaciones con Try-Catch al generar los reportes, personalización de los formularios en estilos y botones y validación de selección de tipo de reporte. Creación de instalador con TODOS los cambios y la creación de las carpetas asociadas a los RPT.WatchersNET CKEditor™ Provider for DotNetNuke®: CKEditor Provider 1.14.01: Whats NewAdded New Plugin "Ventrian News Articles Link Selector" to select an Article Link from the News Article Module (This Plugin is not visible by default in your Toolbar, you need to manually add the 'newsarticleslinks' to your toolbarset) http://www.watchersnet.de/Portals/0/screenshots/dnn/CKEditorNewsArticlesLinks.png File-Browser: Added Paging to the Files List. You can define the Page Size in the Options (Default Value: 20) http://www.watchersnet.de/Portals/0/screenshots/dnn/CKEdito...MyRouter (Virtual WiFi Router): MyRouter 1.0 (Beta): A friendlier User Interface. A logger file to catch exceptions so you may send it to use to improve and fix any bugs that may occur. A feedback form because we always love hearing what you guy's think of MyRouter. Check for update menu item for you to stay up to date will the latest changes. Facebook fan page so you may spread the word and share MyRouter with friends and family And Many other exciting features were sure your going to love!WPF Sound Visualization Library: WPF SVL 0.3 (Source, Binaries, Examples, Help): Version 0.3 of WPFSVL. This includes three new controls: an equalizer, a digital clock, and a time editor.Thai Flood Watch: Thai Flood Watch - Source: non commercial use only ** This project supported by Department of Computer Science KhonKaen University Thailand.ZXing.Net: ZXing.Net 0.4.0.0: sync with rev. 2196 of the java version important fix for RGBLuminanceSource generating barcode bitmaps Windows Phone demo client (only tested with emulator, because I don't have a Windows Phone) Barcode generation support for Windows Forms demo client Webcam support for Windows Forms demo clientOrchard Project: Orchard 1.4: Please read our release notes for Orchard 1.4: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-Notes.NET Assembly Information: Assembly Information 2.1.0.1: - Fixed the issue in which AnyCPU binaries were shown as 32bit - Added support to show the errors in-case if some dlls failed to load.FluentData -Micro ORM with a fluent API that makes it simple to query a database: FluentData version 1.2: New features: - QueryValues method - Added support for automapping to enumerations (both int and string are supported). Fixed 2 reported issues.NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.15: 3.6.0.15 28-Feb-2012 • Fix: The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Work Item 10435: http://netsqlazman.codeplex.com/workitem/10435 • Fix: Made StorageCache thread safe. Thanks to tangrl. • Fix: Members property of SqlAzManApplicationGroup is not functioning. Thanks to tangrl. Work Item 10267: http://netsqlazman.codeplex.com/workitem/10267 • Fix: Indexer are making database calls. Thanks to t...SCCM Client Actions Tool: Client Actions Tool v1.1: SCCM Client Actions Tool v1.1 is the latest version. It comes with following changes since last version: Added stop button to stop the ongoing process. Added action "Query update status". Added option "saveOnlineComputers" in config.ini to enable saving list of online computers from last session. Default value for "LatestClientVersion" set to SP2 R3 (4.00.6487.2157). Wuauserv service manual startup mode is considered healthy on Windows 7. Errors are now suppressed in checkReleases...Kinect PowerPoint Control: Kinect PowerPoint Control v1.1: Updated for Kinect SDK 1.0.SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8: API Updates: SOLID Extract Method for Archives (7Zip and RAR). ExtractAllEntries method on Archive classes will extract archives as a streaming file. This can offer better 7Zip extraction performance if any of the entries are solid. The IsSolid method on 7Zip archives will return true if any are solid. Removed IExtractionListener was removed in favor of events. Unit tests show example. Bug fixes: PPMd passes tests plus other fixes (Thanks Pavel) Zip used to always write a Post Descri...Social Network Importer for NodeXL: SocialNetImporter(v.1.3): This new version includes: - Download new networks for Facebook fan pages. - New options for downloading more posts - Bug fixes To use the new graph data provider, do the following: Unzip the Zip file into the "PlugIns" folder that can be found in the NodeXL installation folder (i.e "C:\Program Files\Social Media Research Foundation\NodeXL Excel Template\PlugIns") Open NodeXL template and you can access the new importer from the "Import" menuASP.NET REST Services Framework: Release 1.1 - Standard version: Beginning from v1.1 the REST-services Framework is compatible with ASP.NET Routing model as well with CRUD (Create, Read, Update, and Delete) principle. These two are often important when building REST API functionality within your application. It also includes ability to apply Filters to a class to target all WebRest methods, as well as some performance enhancements. New version includes Metadata Explorer providing ability exploring the existing services that becomes essential as the number ...SQL Live Monitor: SQL Live Monitor 1.31: A quick fix to make it this version work with SQL 2012. Version 2 already has 2012 working, but am still developing the UI in version 2, so this is just an interim fix to allow user to monitor SQL 2012.Content Slider Module for DotNetNuke: 01.02.00: This release has the following updates and new features: Feature: One-Click Enabling of Pager Setting Feature: Cache Sliders for Performance Feature: Configurable Cache Setting Enhancement: Transitions can be Selected Bug: Secure Folder Images not Viewable Bug: Sliders Disappear on Postback Bug: Remote Images Cause Error Bug: Deleted Images Cause Error System Requirements DotNetNuke v06.00.00 or newer .Net Framework v3.5 SP1 or newer SQL Server 2005 or newerImage Resizer for Windows: Image Resizer 3 Preview 3: Here is yet another iteration toward what will eventually become Image Resizer 3. This release is stable. However, I'm calling it a preview since there are still many features I'd still like to add before calling it complete. Updated on February 28 to fix an issue with installing on multi-user machines. As usual, here is my progress report. Done Preview 3 Fix: 3206 3076 3077 5688 Fix: 7420 Fix: 7527 Fix: 7576 7612 Preview 2 6308 6309 Fix: 7339 Fix: 7357 Preview 1 UI...Finestra Virtual Desktops: 2.5.4500: This is a bug fix release for version 2.5. It fixes several things and adds a couple of minor features. See the 2.5 release notes for more information on the major new features in that version. Important - If Finestra crashes on startup for you, you must install the Visual C++ 2010 runtime from http://www.microsoft.com/download/en/details.aspx?id=5555. Fixes a bug with window animations not refreshing the screen on XP and with DWM off Fixes a bug with with crashing on XP due to a bug in t...Media Companion: MC 3.432b Release: General Now remembers window location. Catching a few more exceptions when an image is blank TV A couple of UI tweaks Movies Fixed the actor name displaying HTML Fixed crash when using Save files as "movie.nfo", "movie.tbn", & "fanart.jpg" New CSV template for HTML output function Added <createdate> tag for HTML output A couple of UI tweaks Known Issues Multiepisodes are not handled correctly in MC. The created nfo is valid, but they are not displayed in MC correctly & saving the...New Projectsabac: abac cn websiteAION Launcher: simple aion launcher...just edit the background image of your choosing inside the code and other things such as the links for the buttons and the ip adress and port of the serverAXTFSTool: Dynamics AX tool that connects to your project's TFS and lists the objects your colleagues have changed. Written in C#, still under development and improvements. Useful for team leaders, deployment managers, etc.cookieTopo: Topo map viewerCrmFetchKit.js: Simple Library at allows the execution of fetchxml queries via JavaScript for Dynamics CRM 2011 (using the new WCF endpoints). Like the CrmRestKit this framework uses the promise/A capacities of jQuery. The code and the idea for this framework bases on the CrmServiceToolkit (http://crmtoolkit.codeplex.com/) developed by Daniel Cai. cy univerX engine: ????????DNSAPI.NET: A common API for managing DNS servers on Windows. This project is based on the work I started back in 2002 when I needed to create a web front-end for Windows' DNS server using the .Net framework. The plan is to expand on the project and include support for the BIND server on Windows too. ego.net: ego.netfdTFS: Team Foundation Server Source Control Plugin for FlashDevelopGeoWPS: GeoWPS is an implementation of the OGC WPS. It will be developed in C#. IThink: A new project.King Garden: Boy King's .net practical projects.King Garret: Boy King's .net learning projects.LottoCheck: Follow LottoNot-Terraria: This is a like terraria game but NOT terrariaPassword Protector: Password Protector SharePoint 2010 BlobCache Manager: Manage your web application's blobcache settings directly in the central administration.SharePoint 2010 SilverLight Multiple File Uploader: SharePoint 2010 SilverLight Multiple File Uploader for Documents Libraries with MetaData.Sharepoint Tool Collection: I want to Integrate Various Utilities of Sharepoint at one place. It is for easy working of user or developer. Ex-1. A utility which takes some params & csv file and upload 100s of items on the sharepoint list easily. Ex-2 A utility to upload documents in a library. etc.SQLCLR Cmd Exec Framework Example: For users of MS SQL Server, xp_cmdshell is a utility that we usually want to have disabled. However there are still cases where calling a command line is needed. This project provides an framework/example to make command line calls. It is not meant as an xp_cmdshell replacement but as a workaround.Symmetric Designs Python 3.2: Symmetric Designs for Python 3.2 helps graphical artists to design and develop their own designs freestyle. It uses the pygame module for Python 3.2. It can also be analysed in order to get a grasp of graphics programming in Python.Terminsoft open CLR libraries: Terminsoft open CLR libraries. The first is Terminsoft.Intervals, intended for modeling the sets of intervals with elements, the comparison operation is defined for. The second is Terminsoft.Syntax, intended for text parsing and transformation and built upon regular expressions.Thai Flood Watch: Thai Flood Watch provides useful information, up-to-date and visual access to the major canal in Bangkok, Thailand using data from department of drainage and sewerage. Easily monitor river and canal flow information in Bangkok area, right from your hand.TheNerd: Sample video game source code. Using Sunburn.Unity.WebAPI: A library that allows simple Integration of Microsoft's Unity IoC container with ASP.NET's WebAPI. This project includes a bespoke DependencyResolver that creates a child container per HTTP request and disposes of all registered IDisposable instances at the end of the request.Wholemy.RemoteTouch: The project is a remote touch-sensitive keyboard with a customizable interface which allows to supplement control of another computer, regardless of the wires. For example, if you have not so fast Tablet PC - a client and a fast desktop computer - the server using the network.WindowPlace: WindowPlace makes it possible to save Window positions and sizes to a profile. Switching between profiles will effortlessly move and resize your windows. Help improve productivity - especially for multi-monitor systems. Developed in C# using WPF and a few Windows API calls in the background. WP Error Manager (Devv.Core.WPErrorManager): Library to log, handle and report errors on Windows Phone 7 apps. Fully customizable and extremely easy to implement. Works with any WP7 app. Tested with the emulator, Nokia Lumia 800 and Samsung Focus Flash.WPMatic: Windows Phone7 App to manage Homematic (eQ-3) Devices. The App is like the Homematic Central Configuration Unit (CCU) in German.www.Nabaza.com Freeware and Ebooks: www.Nabaza.com Freeware and Ebooks by William R. NabazaZap: Zap is a light weight .NET communication framework. It is designed for programs running in local area network. Zap provides code generation tool that enables user to call remote methods, add/remote event listener to remote objects, while hides the lower details.

Read the article

Getting Started Building Windows 8 Store Apps with XAML/C#

- by dwahlin

Technology is fun isn’t it? As soon as you think you’ve figured out where things are heading a new technology comes onto the scene, changes things up, and offers new opportunities. One of the new technologies I’ve been spending quite a bit of time with lately is Windows 8 store applications. I posted my thoughts about Windows 8 during the BUILD conference in 2011 and still feel excited about the opportunity there. Time will tell how well it ends up being accepted by consumers but I’m hopeful that it’ll take off. I currently have two Windows 8 store application concepts I’m working on with one being built in XAML/C# and another in HTML/JavaScript. I really like that Microsoft supports both options since it caters to a variety of developers and makes it easy to get started regardless if you’re a desktop developer or Web developer. Here’s a quick look at how the technologies are organized in Windows 8: In this post I’ll focus on the basics of Windows 8 store XAML/C# apps by looking at features, files, and code provided by Visual Studio projects. To get started building these types of apps you’ll definitely need to have some knowledge of XAML and C#. Let’s get started by looking at the Windows 8 store project types available in Visual Studio 2012. Windows 8 Store XAML/C# Project Types When you open Visual Studio 2012 you’ll see a new entry under C# named Windows Store. It includes 6 different project types as shown next. The Blank App project provides initial starter code and a single page whereas the Grid App and Split App templates provide quite a bit more code as well as multiple pages for your application. The other projects available can be be used to create a class library project that runs in Windows 8 store apps, a WinRT component such as a custom control, and a unit test library project respectively. If you’re building an application that displays data in groups using the “tile” concept then the Grid App or Split App project templates are a good place to start. An example of the initial screens generated by each project is shown next: Grid App Split View App When a user clicks a tile in a Grid App they can view details about the tile data. With a Split View app groups/categories are shown and when the user clicks on a group they can see a list of all the different items and then drill-down into them: For the remainder of this post I’ll focus on functionality provided by the Blank App project since it provides a simple way to get started learning the fundamentals of building Windows 8 store apps. Blank App Project Walkthrough The Blank App project is a great place to start since it’s simple and lets you focus on the basics. In this post I’ll focus on what it provides you out of the box and cover additional details in future posts. Once you have the basics down you can move to the other project types if you need the functionality they provide. The Blank App project template does exactly what it says – you get an empty project with a few starter files added to help get you going. This is a good option if you’ll be building an app that doesn’t fit into the grid layout view that you see a lot of Windows 8 store apps following (such as on the Windows 8 start screen). I ended up starting with the Blank App project template for the app I’m currently working on since I’m not displaying data/image tiles (something the Grid App project does well) or drilling down into lists of data (functionality that the Split App project provides). The Blank App project provides images for the tiles and splash screen (you’ll definitely want to change these), a StandardStyles.xaml resource dictionary that includes a lot of helpful styles such as buttons for the AppBar (a special type of menu in Windows 8 store apps), an App.xaml file, and the app’s main page which is named MainPage.xaml. It also adds a Package.appxmanifest that is used to define functionality that your app requires, app information used in the store, plus more. The App.xaml, App.xaml.cs and StandardStyles.xaml Files The App.xaml file handles loading a resource dictionary named StandardStyles.xaml which has several key styles used throughout the application: <Application x:Class="BlankApp.App" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="using:BlankApp"> <Application.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries>  <ResourceDictionary Source="Common/StandardStyles.xaml"/> </ResourceDictionary.MergedDictionaries> </ResourceDictionary> </Application.Resources> </Application> StandardStyles.xaml has style definitions for different text styles and AppBar buttons. If you scroll down toward the middle of the file you’ll see that many AppBar button styles are included such as one for an edit icon. Button styles like this can be used to quickly and easily add icons/buttons into your application without having to be an expert in design. <Style x:Key="EditAppBarButtonStyle" TargetType="ButtonBase" BasedOn="{StaticResource AppBarButtonStyle}"> <Setter Property="AutomationProperties.AutomationId" Value="EditAppBarButton"/> <Setter Property="AutomationProperties.Name" Value="Edit"/> <Setter Property="Content" Value=""/> </Style> Switching over to App.xaml.cs, it includes some code to help get you started. An OnLaunched() method is added to handle creating a Frame that child pages such as MainPage.xaml can be loaded into. The Frame has the same overall purpose as the one found in WPF and Silverlight applications - it’s used to navigate between pages in an application. /// <summary> /// Invoked when the application is launched normally by the end user. Other entry points /// will be used when the application is launched to open a specific file, to display /// search results, and so forth. /// </summary> /// <param name="args">Details about the launch request and process.</param> protected override void OnLaunched(LaunchActivatedEventArgs args) { Frame rootFrame = Window.Current.Content as Frame; // Do not repeat app initialization when the Window already has content, // just ensure that the window is active if (rootFrame == null) { // Create a Frame to act as the navigation context and navigate to the first page rootFrame = new Frame(); if (args.PreviousExecutionState == ApplicationExecutionState.Terminated) { //TODO: Load state from previously suspended application } // Place the frame in the current Window Window.Current.Content = rootFrame; } if (rootFrame.Content == null) { // When the navigation stack isn't restored navigate to the first page, // configuring the new page by passing required information as a navigation // parameter if (!rootFrame.Navigate(typeof(MainPage), args.Arguments)) { throw new Exception("Failed to create initial page"); } } // Ensure the current window is active Window.Current.Activate(); } Notice that in addition to creating a Frame the code also checks to see if the app was previously terminated so that you can load any state/data that the user may need when the app is launched again. If you’re new to the lifecycle of Windows 8 store apps the following image shows how an app can be running, suspended, and terminated. If the user switches from an app they’re running the app will be suspended in memory. The app may stay suspended or may be terminated depending on how much memory the OS thinks it needs so it’s important to save state in case the application is ultimately terminated and has to be started fresh. Although I won’t cover saving application state here, additional information can be found at http://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh465099.aspx. Another method in App.xaml.cs named OnSuspending() is also included in App.xaml.cs that can be used to store state as the user switches to another application: /// <summary> /// Invoked when application execution is being suspended. Application state is saved /// without knowing whether the application will be terminated or resumed with the contents /// of memory still intact. /// </summary> /// <param name="sender">The source of the suspend request.</param> /// <param name="e">Details about the suspend request.</param> private void OnSuspending(object sender, SuspendingEventArgs e) { var deferral = e.SuspendingOperation.GetDeferral(); //TODO: Save application state and stop any background activity deferral.Complete(); } The MainPage.xaml and MainPage.xaml.cs Files The Blank App project adds a file named MainPage.xaml that acts as the initial screen for the application. It doesn’t include anything aside from an empty <Grid> XAML element in it. The code-behind class named MainPage.xaml.cs includes a constructor as well as a method named OnNavigatedTo() that is called once the page is displayed in the frame. /// <summary> /// An empty page that can be used on its own or navigated to within a Frame. /// </summary> public sealed partial class MainPage : Page { public MainPage() { this.InitializeComponent(); } /// <summary> /// Invoked when this page is about to be displayed in a Frame. /// </summary> /// <param name="e">Event data that describes how this page was reached. The Parameter /// property is typically used to configure the page.</param> protected override void OnNavigatedTo(NavigationEventArgs e) { } } If you’re experienced with XAML you can switch to Design mode and start dragging and dropping XAML controls from the ToolBox in Visual Studio. If you prefer to type XAML you can do that as well in the XAML editor or while in split mode. Many of the controls available in WPF and Silverlight are included such as Canvas, Grid, StackPanel, and Border for layout. Standard input controls are also included such as TextBox, CheckBox, PasswordBox, RadioButton, ComboBox, ListBox, and more. MediaElement is available for rendering video or playing audio files. Some of the “common” XAML controls included out of the box are shown next: Although XAML/C# Windows 8 store apps don’t include all of the functionality available in Silverlight 5, the core functionality required to build store apps is there with additional functionality available in open source projects such as Callisto (started by Microsoft’s Tim Heuer), Q42.WinRT, and others. Standard XAML data binding can be used to bind C# objects to controls, converters can be used to manipulate data during the data binding process, and custom styles and templates can be applied to controls to modify them. Although Visual Studio 2012 doesn’t support visually creating styles or templates, Expression Blend 5 handles that very well. To get started building the initial screen of a Windows 8 app you can start adding controls as mentioned earlier. Simply place them inside of the <Grid> element that’s included. You can arrange controls in a stacked manner using the StackPanel control, add a border around controls using the Border control, arrange controls in columns and rows using the Grid control, or absolutely position controls using the Canvas control. One of the controls that may be new to you is the AppBar. It can be used to add menu/toolbar functionality into a store app and keep the app clean and focused. You can place an AppBar at the top or bottom of the screen. A user on a touch device can swipe up to display the bottom AppBar or right-click when using a mouse. An example of defining an AppBar that contains an Edit button is shown next. The EditAppBarButtonStyle is available in the StandardStyles.xaml file mentioned earlier. <Page.BottomAppBar> <AppBar x:Name="ApplicationAppBar" Padding="10,0,10,0" AutomationProperties.Name="Bottom App Bar"> <Grid> <StackPanel x:Name="RightPanel" Orientation="Horizontal" Grid.Column="1" HorizontalAlignment="Right"> <Button x:Name="Edit" Style="{StaticResource EditAppBarButtonStyle}" Tag="Edit" /> </StackPanel> </Grid> </AppBar> </Page.BottomAppBar> Like standard XAML controls, the <Button> control in the AppBar can be wired to an event handler method in the MainPage.Xaml.cs file or even bound to a ViewModel object using “commanding” if your app follows the Model-View-ViewModel (MVVM) pattern (check out the MVVM Light package available through NuGet if you’re using MVVM with Windows 8 store apps). The AppBar can be used to navigate to different screens, show and hide controls, display dialogs, show settings screens, and more. The Package.appxmanifest File The Package.appxmanifest file contains configuration details about your Windows 8 store app. By double-clicking it in Visual Studio you can define the splash screen image, small and wide logo images used for tiles on the start screen, orientation information, and more. You can also define what capabilities the app has such as if it uses the Internet, supports geolocation functionality, requires a microphone or webcam, etc. App declarations such as background processes, file picker functionality, and sharing can also be defined Finally, information about how the app is packaged for deployment to the store can also be defined. Summary If you already have some experience working with XAML technologies you’ll find that getting started building Windows 8 applications is pretty straightforward. Many of the controls available in Silverlight and WPF are available making it easy to get started without having to relearn a lot of new technologies. In the next post in this series I’ll discuss additional features that can be used in your Windows 8 store apps.

Read the article

Setting up and using Bing Translate API Service for Machine Translation

- by Rick Strahl

Last week I spent quite a bit of time trying to set up the Bing Translate API service. I can honestly say this was one of the most screwed up developer experiences I've had in a long while - specifically related to the byzantine sign up process that Microsoft has in place. Not only is it nearly impossible to find decent documentation on the required signup process, some of the links in the docs are just plain wrong, and some of the account pages you need to access the actual account information once signed up are not linked anywhere from the administration UI. To make things even harder is the fact that the APIs changed a while back, with a completely new authentication scheme that's described and not directly linked documentation topic also made for a very frustrating search experience. It's a bummer that this is the case too, because the actual API itself is easy to use and works very well - fast and reasonably accurate (as accurate as you can expect machine translation to be). But the sign up process is a pain in the ass doubtlessly leaving many people giving up in frustration. In this post I'll try to hit all the points needed to set up to use the Bing Translate API in one place since such a document seems to be missing from Microsoft. Hopefully the API folks at Microsoft will get their shit together and actually provide this sort of info on their site… Signing Up The first step required is to create a Windows Azure MarketPlace account. Go to: https://datamarket.azure.com/ Sign in with your Windows Live Id If you don't have an account you will be taken to a registration page which you have to fill out. Follow the links and complete the registration. Once you're signed in you can start adding services. Click on the Data Link on the main page Select Microsoft Translator from the list This adds the Microsoft Bing Translator to your services. Pricing The page shows the pricing matrix and the free service which provides 2 megabytes for translations a month for free. Prices go up steeply from there. Pricing is determined by actual bytes of the result translations used. Max translations are 1000 characters so at minimum this means you get around 2000 translations a month for free. However most translations are probable much less so you can expect larger number of translations to go through. For testing or low volume translations this should be just fine. Once signed up there are no further instructions and you're left in limbo on the MS site. Register your Application Once you've created the Data association with Translator the next step is registering your application. To do this you need to access your developer account. Go to https://datamarket.azure.com/developer/applications/register Provide a ClientId, which is effectively the unique string identifier for your application (not your customer id!) Provide your name The client secret was auto-created and this becomes your 'password' For the redirect url provide any https url: https://microsoft.com works Give this application a description of your choice so you can identify it in the list of apps Now, once you've registered your application, keep track of the ClientId and ClientSecret - those are the two keys you need to authenticate before you can call the Translate API. Oddly the applications page is hidden from the Azure Portal UI. I couldn't find a direct link from anywhere on the site back to this page where I can examine my developer application keys. To find them you can go to: https://datamarket.azure.com/developer/applications You can come back here to look at your registered applications and pick up the ClientID and ClientSecret. Fun eh? But we're now ready to actually call the API and do some translating. Using the Bing Translate API The good news is that after this signup hell, using the API is pretty straightforward. To use the translation API you'll need to actually use two services: You need to call an authentication API service first, before you can call the actual translator API. These two APIs live on different domains, and the authentication API returns JSON data while the translator service returns XML. So much for consistency. Authentication The first step is authentication. The service uses oAuth authentication with a bearer token that has to be passed to the translator API. The authentication call retrieves the oAuth token that you can then use with the translate API call. The bearer token has a short 10 minute life time, so while you can cache it for successive calls, the token can't be cached for long periods. This means for Web backend requests you typically will have to authenticate each time unless you build a more elaborate caching scheme that takes the timeout into account (perhaps using the ASP.NET Cache object). For low volume operations you can probably get away with simply calling the auth API for every translation you do. To call the Authentication API use code like this:/// /// Retrieves an oAuth authentication token to be used on the translate /// API request. The result string needs to be passed as a bearer token /// to the translate API. /// /// You can find client ID and Secret (or register a new one) at: /// https://datamarket.azure.com/developer/applications/ /// /// The client ID of your application /// The client secret or password /// public string GetBingAuthToken(string clientId = null, string clientSecret = null) { string authBaseUrl = https://datamarket.accesscontrol.windows.net/v2/OAuth2-13; if (string.IsNullOrEmpty(clientId) || string.IsNullOrEmpty(clientSecret)) { ErrorMessage = Resources.Resources.Client_Id_and_Client_Secret_must_be_provided; return null; } var postData = string.Format("grant_type=client_credentials&client_id={0}" + "&client_secret={1}" + "&scope=http://api.microsofttranslator.com", HttpUtility.UrlEncode(clientId), HttpUtility.UrlEncode(clientSecret)); // POST Auth data to the oauth API string res, token; try { var web = new WebClient(); web.Encoding = Encoding.UTF8; res = web.UploadString(authBaseUrl, postData); } catch (Exception ex) { ErrorMessage = ex.GetBaseException().Message; return null; } var ser = new JavaScriptSerializer(); var auth = ser.Deserialize<BingAuth>(res); if (auth == null) return null; token = auth.access_token; return token; } private class BingAuth { public string token_type { get; set; } public string access_token { get; set; } } This code basically takes the client id and secret and posts it at the oAuth endpoint which returns a JSON string. Here I use the JavaScript serializer to deserialize the JSON into a custom object I created just for deserialization. You can also use JSON.NET and dynamic deserialization if you are already using JSON.NET in your app in which case you don't need the extra type. In my library that houses this component I don't, so I just rely on the built in serializer. The auth method returns a long base64 encoded string which can be used as a bearer token in the translate API call. Translation Once you have the authentication token you can use it to pass to the translate API. The auth token is passed as an Authorization header and the value is prefixed with a 'Bearer ' prefix for the string. Here's what the simple Translate API call looks like:/// /// Uses the Bing API service to perform translation /// Bing can translate up to 1000 characters. /// /// Requires that you provide a CLientId and ClientSecret /// or set the configuration values for these two. /// /// More info on setup: /// http://www.west-wind.com/weblog/ /// /// Text to translate /// Two letter culture name /// Two letter culture name /// Pass an access token retrieved with GetBingAuthToken. /// If not passed the default keys from .config file are used if any /// public string TranslateBing(string text, string fromCulture, string toCulture, string accessToken = null) { string serviceUrl = "http://api.microsofttranslator.com/V2/Http.svc/Translate"; if (accessToken == null) { accessToken = GetBingAuthToken(); if (accessToken == null) return null; } string res; try { var web = new WebClient(); web.Headers.Add("Authorization", "Bearer " + accessToken); string ct = "text/plain"; string postData = string.Format("?text={0}&from={1}&to={2}&contentType={3}", HttpUtility.UrlEncode(text), fromCulture, toCulture, HttpUtility.UrlEncode(ct)); web.Encoding = Encoding.UTF8; res = web.DownloadString(serviceUrl + postData); } catch (Exception e) { ErrorMessage = e.GetBaseException().Message; return null; } // result is a single XML Element fragment var doc = new XmlDocument(); doc.LoadXml(res); return doc.DocumentElement.InnerText; } The first of this code deals with ensuring the auth token exists. You can either pass the token into the method manually or let the method automatically retrieve the auth code on its own. In my case I'm using this inside of a Web application and in that situation I simply need to re-authenticate every time as there's no convenient way to manage the lifetime of the auth cookie. The auth token is added as an Authorization HTTP header prefixed with 'Bearer ' and attached to the request. The text to translate, the from and to language codes and a result format are passed on the query string of this HTTP GET request against the Translate API. The translate API returns an XML string which contains a single element with the translated string. Using the Wrapper Methods It should be pretty obvious how to use these two methods but here are a couple of test methods that demonstrate the two usage scenarios:[TestMethod] public void TranslateBingWithAuthTest() { var translate = new TranslationServices(); string clientId = DbResourceConfiguration.Current.BingClientId; string clientSecret = DbResourceConfiguration.Current.BingClientSecret; string auth = translate.GetBingAuthToken(clientId, clientSecret); Assert.IsNotNull(auth); string text = translate.TranslateBing("Hello World we're back home!", "en", "de",auth); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } [TestMethod] public void TranslateBingIntegratedTest() { var translate = new TranslationServices(); string text = translate.TranslateBing("Hello World we're back home!","en","de"); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } Other API Methods The Translate API has a number of methods available and this one is the simplest one but probably also the most common one that translates a single string. You can find additional methods for this API here: http://msdn.microsoft.com/en-us/library/ff512419.aspx Soap and AJAX APIs are also available and documented on MSDN: http://msdn.microsoft.com/en-us/library/dd576287.aspx These links will be your starting points for calling other methods in this API. Dual Interface I've talked about my database driven localization provider here in the past, and it's for this tool that I added the Bing localization support. Basically I have a localization administration form that allows me to translate individual strings right out of the UI, using both Google and Bing APIs: As you can see in this example, the results from Google and Bing can vary quite a bit - in this case Google is stumped while Bing actually generated a valid translation. At other times it's the other way around - it's pretty useful to see multiple translations at the same time. Here I can choose from one of the values and driectly embed them into the translated text field. Lost in Translation There you have it. As I mentioned using the API once you have all the bureaucratic crap out of the way calling the APIs is fairly straight forward and reasonably fast, even if you have to call the Auth API for every call. Hopefully this post will help out a few of you trying to navigate the Microsoft bureaucracy, at least until next time Microsoft upends everything and introduces new ways to sign up again. Until then - happy translating… Related Posts Translation method Source on Github Translating with Google Translate without Google API Keys Creating a data-driven ASP.NET Resource Provider© Rick Strahl, West Wind Technologies, 2005-2013Posted in Localization ASP.NET .NET Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Adding Unobtrusive Validation To MVCContrib Fluent Html

- by srkirkland

ASP.NET MVC 3 includes a new unobtrusive validation strategy that utilizes HTML5 data-* attributes to decorate form elements. Using a combination of jQuery validation and an unobtrusive validation adapter script that comes with MVC 3, those attributes are then turned into client side validation rules. A Quick Introduction to Unobtrusive Validation To quickly show how this works in practice, assume you have the following Order.cs class (think Northwind) [If you are familiar with unobtrusive validation in MVC 3 you can skip to the next section]: public class Order : DomainObject { [DataType(DataType.Date)] public virtual DateTime OrderDate { get; set; } [Required] [StringLength(12)] public virtual string ShipAddress { get; set; } [Required] public virtual Customer OrderedBy { get; set; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Note the System.ComponentModel.DataAnnotations attributes, which provide the validation and metadata information used by ASP.NET MVC 3 to determine how to render out these properties. Now let’s assume we have a form which can edit this Order class, specifically let’s look at the ShipAddress property: @Html.LabelFor(x => x.Order.ShipAddress) @Html.EditorFor(x => x.Order.ShipAddress) @Html.ValidationMessageFor(x => x.Order.ShipAddress) .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now the Html.EditorFor() method is smart enough to look at the ShipAddress attributes and write out the necessary unobtrusive validation html attributes. Note we could have used Html.TextBoxFor() or even Html.TextBox() and still retained the same results. If we view source on the input box generated by the Html.EditorFor() call, we get the following: <input type="text" value="Rua do Paço, 67" name="Order.ShipAddress" id="Order_ShipAddress" data-val-required="The ShipAddress field is required." data-val-length-max="12" data-val-length="The field ShipAddress must be a string with a maximum length of 12." data-val="true" class="text-box single-line input-validation-error"> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } As you can see, we have data-val-* attributes for both required and length, along with the proper error messages and additional data as necessary (in this case, we have the length-max=”12”). And of course, if we try to submit the form with an invalid value, we get an error on the client: Working with MvcContrib’s Fluent Html The MvcContrib project offers a fluent interface for creating Html elements which I find very expressive and useful, especially when it comes to creating select lists. Let’s look at a few quick examples: @this.TextBox(x => x.FirstName).Class("required").Label("First Name:") @this.MultiSelect(x => x.UserId).Options(ViewModel.Users) @this.CheckBox("enabled").LabelAfter("Enabled").Title("Click to enable.").Styles(vertical_align => "middle") @(this.Select("Order.OrderedBy").Options(Model.Customers, x => x.Id, x => x.CompanyName) .Selected(Model.Order.OrderedBy != null ? Model.Order.OrderedBy.Id : "") .FirstOption(null, "--Select A Company--") .HideFirstOptionWhen(Model.Order.OrderedBy != null) .Label("Ordered By:")) .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } These fluent html helpers create the normal html you would expect, and I think they make life a lot easier and more readable when dealing with complex markup or select list data models (look ma: no anonymous objects for creating class names!). Of course, the problem we have now is that MvcContrib’s fluent html helpers don’t know about ASP.NET MVC 3’s unobtrusive validation attributes and thus don’t take part in client validation on your page. This is not ideal, so I wrote a quick helper method to extend fluent html with the knowledge of what unobtrusive validation attributes to include when they are rendered. Extending MvcContrib’s Fluent Html Before posting the code, there are just a few things you need to know. The first is that all Fluent Html elements implement the IElement interface (MvcContrib.FluentHtml.Elements.IElement), and the second is that the base System.Web.Mvc.HtmlHelper has been extended with a method called GetUnobtrusiveValidationAttributes which we can use to determine the necessary attributes to include. With this knowledge we can make quick work of extending fluent html: public static class FluentHtmlExtensions { public static T IncludeUnobtrusiveValidationAttributes<T>(this T element, HtmlHelper htmlHelper) where T : MvcContrib.FluentHtml.Elements.IElement { IDictionary<string, object> validationAttributes = htmlHelper .GetUnobtrusiveValidationAttributes(element.GetAttr("name")); foreach (var validationAttribute in validationAttributes) { element.SetAttr(validationAttribute.Key, validationAttribute.Value); } return element; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The code is pretty straight forward – basically we use a passed HtmlHelper to get a list of validation attributes for the current element and then add each of the returned attributes to the element to be rendered. The Extension In Action Now let’s get back to the earlier ShipAddress example and see what we’ve accomplished. First we will use a fluent html helper to render out the ship address text input (this is the ‘before’ case): @this.TextBox("Order.ShipAddress").Label("Ship Address:").Class("class-name") .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } And the resulting HTML: <label id="Order_ShipAddress_Label" for="Order_ShipAddress">Ship Address:</label> <input type="text" value="Rua do Paço, 67" name="Order.ShipAddress" id="Order_ShipAddress" class="class-name"> Now let’s do the same thing except here we’ll use the newly written extension method: @this.TextBox("Order.ShipAddress").Label("Ship Address:") .Class("class-name").IncludeUnobtrusiveValidationAttributes(Html) .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } And the resulting HTML: <label id="Order_ShipAddress_Label" for="Order_ShipAddress">Ship Address:</label> <input type="text" value="Rua do Paço, 67" name="Order.ShipAddress" id="Order_ShipAddress" data-val-required="The ShipAddress field is required." data-val-length-max="12" data-val-length="The field ShipAddress must be a string with a maximum length of 12." data-val="true" class="class-name"> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Excellent! Now we can continue to use unobtrusive validation and have the flexibility to use ASP.NET MVC’s Html helpers or MvcContrib’s fluent html helpers interchangeably, and every element will participate in client side validation. Wrap Up Overall I’m happy with this solution, although in the best case scenario MvcContrib would know about unobtrusive validation attributes and include them automatically (of course if it is enabled in the web.config file). I know that MvcContrib allows you to author global behaviors, but that requires changing the base class of your views, which I am not willing to do. Enjoy!

Read the article

Macbook Pro Wireless Reconnecting

- by A Student at a University

I'm using a WPA2 EAP network. I'm sitting next to the access point. The connection keeps dropping and taking ~10 seconds to reconnect. My other devices are staying online. What's causing it? syslog: 01:21:10 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:21:10 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX 01:21:10 NetworkManager[XX40]: <info> (eth1): DHCPv4 state changed reboot -> renew 01:21:10 NetworkManager[XX40]: <info> address XXX.XXX.XXX.XXX 01:21:10 NetworkManager[XX40]: <info> prefix 20 (XXX.XXX.XXX.XXX) 01:21:10 NetworkManager[XX40]: <info> gateway XXX.XXX.XXX.XXX 01:21:10 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:21:10 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:21:10 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:21:10 NetworkManager[XX40]: <info> domain name 'server.domain.tld' 01:21:10 dhclient: bound to XXX.XXX.XXX.XXX -- renewal in XXX seconds. 01:33:30 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:33:30 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX 01:33:30 dhclient: bound to XXX.XXX.XXX.XXX -- renewal in XXX seconds. 01:35:13 wpa_supplicant[XX60]: CTRL-EVENT-EAP-STARTED EAP authentication started 01:35:13 wpa_supplicant[XX60]: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected 01:35:14 wpa_supplicant[XX60]: EAP-MSCHAPV2: Authentication succeeded 01:35:14 wpa_supplicant[XX60]: EAP-TLV: TLV Result - Success - EAP-TLV/Phase2 Completed 01:35:14 wpa_supplicant[XX60]: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully 01:35:14 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> 4-way handshake 01:35:14 wpa_supplicant[XX60]: WPA: Key negotiation completed with XX:XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP] 01:35:14 NetworkManager[XX40]: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake 01:35:14 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:35:17 wpa_supplicant[XX60]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys 01:35:17 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> disconnected 01:35:17 NetworkManager[XX40]: <info> (eth1): supplicant connection state: disconnected -> scanning 01:35:26 wpa_supplicant[XX60]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys 01:35:26 NetworkManager[XX40]: <info> (eth1): supplicant connection state: scanning -> disconnected 01:35:29 NetworkManager[XX40]: <info> (eth1): supplicant connection state: disconnected -> scanning 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 8 -> 3 (reason 11) 01:35:32 NetworkManager[XX40]: <info> (eth1): deactivating device (reason: 11). 01:35:32 NetworkManager[XX40]: <info> (eth1): canceled DHCP transaction, DHCP client pid XX27 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) starting connection 'Auto XXXXXXXXXX' 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 3 -> 4 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... 01:35:32 NetworkManager[XX40]: <info> (eth1): supplicant connection state: scanning -> disconnected 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 4 -> 5 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1/wireless): access point 'Auto XXXXXXXXXX' has security, but secrets are required. 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 5 -> 6 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 6 -> 4 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... 01:35:32 NetworkManager[XX40]: <info> (eth1): device state change: 4 -> 5 (reason 0) 01:35:32 NetworkManager[XX40]: <info> Activation (eth1/wireless): connection 'Auto XXXXXXXXXX' has security, and secrets exist. No new secrets needed. 01:35:32 NetworkManager[XX40]: <info> Config: added 'ssid' value 'XXXXXXXXXX' 01:35:32 NetworkManager[XX40]: <info> Config: added 'scan_ssid' value '1' 01:35:32 NetworkManager[XX40]: <info> Config: added 'key_mgmt' value 'WPA-EAP' 01:35:32 NetworkManager[XX40]: <info> Config: added 'password' value '<omitted>' 01:35:32 NetworkManager[XX40]: <info> Config: added 'eap' value 'PEAP' 01:35:32 NetworkManager[XX40]: <info> Config: added 'fragment_size' value 'XXX0' 01:35:32 NetworkManager[XX40]: <info> Config: added 'phase2' value 'auth=MSCHAPV2' 01:35:32 NetworkManager[XX40]: <info> Config: added 'ca_cert' value '/etc/ssl/certs/Equifax_Secure_CA.pem' 01:35:32 NetworkManager[XX40]: <info> Config: added 'identity' value 'XXXXXXX' 01:35:32 NetworkManager[XX40]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. 01:35:32 NetworkManager[XX40]: <info> Config: set interface ap_scan to 1 01:35:32 NetworkManager[XX40]: <info> (eth1): supplicant connection state: disconnected -> scanning 01:35:36 wpa_supplicant[XX60]: Associated with XX:XX:XX:XX:XX:XX 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: scanning -> associated 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-EAP-STARTED EAP authentication started 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected 01:35:36 wpa_supplicant[XX60]: EAP-MSCHAPV2: Authentication succeeded 01:35:36 wpa_supplicant[XX60]: EAP-TLV: TLV Result - Success - EAP-TLV/Phase2 Completed 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: associated -> 4-way handshake 01:35:36 wpa_supplicant[XX60]: WPA: Could not find AP from the scan results 01:35:36 wpa_supplicant[XX60]: WPA: Key negotiation completed with XX:XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP] 01:35:36 wpa_supplicant[XX60]: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX:XX completed (reauth) [id=0 id_str=] 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake 01:35:36 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:35:36 NetworkManager[XX40]: <info> Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'XXXXXXXXXX'. 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled. 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) started... 01:35:36 NetworkManager[XX40]: <info> (eth1): device state change: 5 -> 7 (reason 0) 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Beginning DHCPv4 transaction (timeout in 45 seconds) 01:35:36 NetworkManager[XX40]: <info> dhclient started with pid XX87 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) complete. 01:35:36 dhclient: Internet Systems Consortium DHCP Client VXXX.XXX.XXX 01:35:36 dhclient: Copyright 2004-2009 Internet Systems Consortium. 01:35:36 dhclient: All rights reserved. 01:35:36 dhclient: For info, please visit https://www.isc.org/software/dhcp/ 01:35:36 dhclient: 01:35:36 NetworkManager[XX40]: <info> (eth1): DHCPv4 state changed nbi -> preinit 01:35:36 dhclient: Listening on LPF/eth1/XX:XX:XX:XX:XX:XX 01:35:36 dhclient: Sending on LPF/eth1/XX:XX:XX:XX:XX:XX 01:35:36 dhclient: Sending on Socket/fallback 01:35:36 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:35:36 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX 01:35:36 dhclient: bound to XXX.XXX.XXX.XXX -- renewal in XXX seconds. 01:35:36 NetworkManager[XX40]: <info> (eth1): DHCPv4 state changed preinit -> reboot 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 4 of 5 (IP4 Configure Get) scheduled... 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 4 of 5 (IP4 Configure Get) started... 01:35:36 NetworkManager[XX40]: <info> address XXX.XXX.XXX.XXX 01:35:36 NetworkManager[XX40]: <info> prefix 20 (XXX.XXX.XXX.XXX) 01:35:36 NetworkManager[XX40]: <info> gateway XXX.XXX.XXX.XXX 01:35:36 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:35:36 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:35:36 NetworkManager[XX40]: <info> nameserver 'XXX.XXX.XXX.XXX' 01:35:36 NetworkManager[XX40]: <info> domain name 'server.domain.tld' 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) scheduled... 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 4 of 5 (IP4 Configure Get) complete. 01:35:36 NetworkManager[XX40]: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) started... 01:35:37 NetworkManager[XX40]: <info> (eth1): device state change: 7 -> 8 (reason 0) 01:35:37 NetworkManager[XX40]: <info> (eth1): roamed from BSSID XX:XX:XX:XX:XX:XX (XXXXXXXXXX) to XX:XX:XX:XX:XX:XX (XXXXXXXXX) 01:35:37 NetworkManager[XX40]: <info> Policy set 'Auto XXXXXXXXXX' (eth1) as default for IPv4 routing and DNS. 01:35:37 NetworkManager[XX40]: <info> Activation (eth1) successful, device activated. 01:35:37 NetworkManager[XX40]: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete. 01:35:43 wpa_supplicant[XX60]: Trying to associate with XX:XX:XX:XX:XX:XX (SSID='XXXXXXXXXX' freq=2412 MHz) 01:35:43 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> associating 01:35:43 wpa_supplicant[XX60]: Association request to the driver failed 01:35:46 wpa_supplicant[XX60]: Associated with XX:XX:XX:XX:XX:XX 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: associating -> associated 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: associated -> 4-way handshake 01:35:46 wpa_supplicant[XX60]: WPA: Key negotiation completed with XX:XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP] 01:35:46 wpa_supplicant[XX60]: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX:XX completed (reauth) [id=0 id_str=] 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake 01:35:46 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:40:47 wpa_supplicant[XX60]: WPA: Group rekeying completed with XX:XX:XX:XX:XX:XX [GTK=TKIP] 01:40:47 NetworkManager[XX40]: <info> (eth1): supplicant connection state: completed -> group handshake 01:40:47 NetworkManager[XX40]: <info> (eth1): supplicant connection state: group handshake -> completed 01:50:19 dhclient: DHCPREQUEST of XXX.XXX.XXX.XXX on eth1 to XXX.XXX.XXX.XXX port 67 01:50:19 dhclient: DHCPACK of XXX.XXX.XXX.XXX from XXX.XXX.XXX.XXX

Read the article

Dynamic XAP loading in Task-It - Part 1

Download Source Code NOTE 1: The source code provided is running against the RC versions of Silverlight 4 and VisualStudio 2010, so you will need to update to those bits to run it. NOTE 2: After downloading the source, be sure to set the .Web project as the StartUp Project, and Default.aspx as the Start Page In my MEF into post, MEF to the rescue in Task-It, I outlined a couple of issues I was facing and explained why I chose MEF (the Managed Extensibility Framework) to solve these issues. Other posts to check out There are a few other resources out there around dynamic XAP loading that you may want to review (by the way, Glenn Block is the main dude when it comes to MEF): Glenn Blocks 3-part series on a dynamically loaded dashboard Glenn and John Papas Silverlight TV video on dynamic xap loading These provide some great info, but didnt exactly cover the scenario I wanted to achieve in Task-Itand that is dynamically loading each of the apps pages the first time the user enters a page. The code In the code I provided for download above, I created a simple solution that shows the technique I used for dynamic XAP loading in Task-It, but without all of the other code that surrounds it. Taking all that other stuff away should make it easier to grasp. Having said that, there is still a fair amount of code involved. I am always looking for ways to make things simpler, and to achieve the desired result with as little code as possible, so if I find a better/simpler way I will blog about it, but for now this technique works for me. When I created this solution I started by creating a new Silverlight Navigation Application called DynamicXAP Loading. I then added the following line to my UriMappings in MainPage.xaml: <uriMapper:UriMapping Uri="/{assemblyName};component/{path}" MappedUri="/{assemblyName};component/{path}"/> In the section of MainPage.xaml that produces the page links in the upper right, I kept the Home link, but added a couple of new ones (page1 and page 2). These are the pages that will be dynamically (lazy) loaded: <StackPanel x:Name="LinksStackPanel" Style="{StaticResource LinksStackPanelStyle}"> <HyperlinkButton Style="{StaticResource LinkStyle}" NavigateUri="/Home" TargetName="ContentFrame" Content="home"/> <Rectangle Style="{StaticResource DividerStyle}"/> <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 1" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage1}"/> <Rectangle Style="{StaticResource DividerStyle}"/> <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 2" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage2}"/> </StackPanel> In App.xaml.cs I added a bit of MEF code. In Application_Startup I call a method called InitializeContainer, which creates a PackageCatalog (a MEF thing), then I create a CompositionContainer and pass it to the CompositionHost.Initialize method. This is boiler-plate MEF stuff that allows you to do 'composition' and import 'packages'. You're welcome to do a bit more MEF research on what is happening here if you'd like, but for the purpose of this example you can just trust that it works. :-) private void Application_Startup(object sender, StartupEventArgs e) { InitializeContainer(); this.RootVisual = new MainPage(); } private static void InitializeContainer() { var catalog = new PackageCatalog(); catalog.AddPackage(Package.Current); var container = new CompositionContainer(catalog); container.ComposeExportedValue(catalog); CompositionHost.Initialize(container); } Infrastructure In the sample code you'll notice that there is a project in the solution called DynamicXAPLoading.Infrastructure. This is simply a Silverlight Class Library project that I created just to move stuff I considered application 'infrastructure' code into a separate place, rather than cluttering the main Silverlight project (DynamicXapLoading). I did this same thing in Task-It, as the amount of this type of code was starting to clutter up the Silverlight project, and it just seemed to make sense to move things like Enums, Constants and the like off to a separate place. In the DynamicXapLoading.Infrastructure project you'll see 3 classes: Enums - There is only one enum in here called ModuleEnum. We'll use these later. PageMetadata - We will use this class later to add metadata to a new dynamically loaded project. ViewModelBase - This is simply a base class for view models that we will use in this, as well as future samples. As mentioned in my MVVM post, I will be using the MVVM pattern throughout my code for reasons detailed in the post. By the way, the ViewModelExtension class in there allows me to do strongly-typed property changed notification, so rather than OnPropertyChanged("MyProperty"), I can do this.OnPropertyChanged(p => p.MyProperty). It's just a less error-prown approach, because if you don't spell "MyProperty" correctly using the first method, nothing will break, it just won't work. Adding a new page We currently have a couple of pages that are being dynamically (lazy) loaded, but now let's add a third page. 1. First, create a new Silverlight Application project: In this example I call it Page3. In the future you may prefer to use a different name, like DynamicXAPLoading.Page3, or even DynamicXAPLoading.Modules.Page3. It can be whatever you want. In my Task-It application I used the latter approach (with 'Modules' in the name). I do think of these application as 'modules', but Prism uses the same term, so some folks may not like that. Use whichever naming convention you feel is appropriate, but for now Page3 will do. When you change the name to Page3 and click OK, you will be presented with the Add New Project dialog: It is important that you leave the 'Host the Silverlight application in a new or existing Web site in the solution' checked, and the .Web project will be selected in the dropdown below. This will create the .xap file for this project under ClientBin in the .Web project, which is where we want it. 2. Uncheck the 'Add a test page that references the application' checkbox, and leave everything else as is. 3. Once the project is created, you can delete App.xaml and MainPage.xaml. 4. You will need to add references your new project to the following: DynamicXAPLoading.Infrastructure.dll (this is a Project reference) DynamicNavigation.dll (this is in the Libs directory under the DynamicXAPLoading project) System.ComponentModel.Composition.dll System.ComponentModel.Composition.Initialization.dll System.Windows.Controls.Navigation.dll If you have installed the latest RC bits you will find the last 3 dll's under the .NET tab in the Add Referenced dialog. They live in the following location, or if you are on a 64-bit machine like me, it will be Program Files (x86). C:\Program Files\Microsoft SDKs\Silverlight\v4.0\Libraries\Client Now let's create some UI for our new project. 5. First, create a new Silverlight User Control called Page3.dyn.xaml 6. Paste the following code into the xaml: <dyn:DynamicPageShim xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:dyn="clr-namespace:DynamicNavigation;assembly=DynamicNavigation" xmlns:my="clr-namespace:Page3;assembly=Page3"> <my:Page3Host /> </dyn:DynamicPageShim> This is just a 'shim', part of David Poll's technique for dynamic loading. 7. Expand the icon next to Page3.dyn.xaml and delete the code-behind file (Page3.dyn.xaml.cs). 8. Next we will create a control that will 'host' our page. Create another Silverlight User Control called Page3Host.xaml and paste in the following XAML: <dyn:DynamicPage x:Class="Page3.Page3Host" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:dyn="clr-namespace:DynamicNavigation;assembly=DynamicNavigation" xmlns:Views="clr-namespace:Page3.Views" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400" Title="Page 3"> <Views:Page3/> </dyn:DynamicPage> 9. Now paste the following code into the code-behind for this control: using DynamicXAPLoading.Infrastructure; namespace Page3 { [PageMetadata(NavigateUri = "/Page3;component/Page3.dyn.xaml", Module = Enums.Page3)] public partial class Page3Host { public Page3Host() { InitializeComponent(); } } } Notice that we are now using that PageMetadata custom attribute class that we created in the Infrastructure project, and setting its two properties. NavigateUri - This tells it that the assembly is called Page3 (with a slash beforehand), and the page we want to load is Page3.dyn.xaml...our 'shim'. That line we added to the UriMapper in MainPage.xaml will use this information to load the page. Module - This goes back to that ModuleEnum class in our Infrastructure project. However, setting the Module to ModuleEnum.Page3 will cause a compilation error, so... 10. Go back to that Enums.cs under the Infrastructure project and add a 3rd entry for Page3: public enum ModuleEnum { Page1, Page2, Page3 } 11. Now right-click on the Page3 project and add a folder called Views. 12. Right-click on the Views folder and create a new Silverlight User Control called Page3.xaml. We won't bother creating a view model for this User Control as I did in the Page 1 and Page 2 projects, just for the sake of simplicity. Feel free to add one if you'd like though, and copy the code from one of those other projects. Right now those view models aren't really doing anything anyway...though they will in my next post. :-) 13. Now let's replace the xaml for Page3.xaml with the following: <dyn:DynamicPage x:Class="Page3.Views.Page3" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:dyn="clr-namespace:DynamicNavigation;assembly=DynamicNavigation" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400" Style="{StaticResource PageStyle}"> <Grid x:Name="LayoutRoot"> <ScrollViewer x:Name="PageScrollViewer" Style="{StaticResource PageScrollViewerStyle}"> <StackPanel x:Name="ContentStackPanel"> <TextBlock x:Name="HeaderText" Style="{StaticResource HeaderTextStyle}" Text="Page 3"/> <TextBlock x:Name="ContentText" Style="{StaticResource ContentTextStyle}" Text="Page 3 content"/> </StackPanel> </ScrollViewer> </Grid> </dyn:DynamicPage> 14. And in the code-behind remove the inheritance from UserControl, so it should look like this: namespace Page3.Views { public partial class Page3 { public Page3() { InitializeComponent(); } } } One thing you may have noticed is that the base class for the last two User Controls we created is DynamicPage. Once again, we are using the infrastructure that David Poll created. 15. OK, a few last things. We need a link on our main page so that we can access our new page. In MainPage.xaml let's update our links to look like this: <StackPanel x:Name="LinksStackPanel" Style="{StaticResource LinksStackPanelStyle}"> <HyperlinkButton Style="{StaticResource LinkStyle}" NavigateUri="/Home" TargetName="ContentFrame" Content="home"/> <Rectangle Style="{StaticResource DividerStyle}"/> <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 1" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage1}"/> <Rectangle Style="{StaticResource DividerStyle}"/> <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 2" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage2}"/> <Rectangle Style="{StaticResource DividerStyle}"/> <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 3" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage3}"/> </StackPanel> 16. Next, we need to add the following at the bottom of MainPageViewModel in the ViewModels directory of our DynamicXAPLoading project: public ModuleEnum ModulePage3 { get { return ModuleEnum.Page3; } } 17. And at last, we need to add a case for our new page to the switch statement in MainPageViewModel: switch (module) { case ModuleEnum.Page1: DownloadPackage("Page1.xap"); break; case ModuleEnum.Page2: DownloadPackage("Page2.xap"); break; case ModuleEnum.Page3: DownloadPackage("Page3.xap"); break; default: break; } Now fire up the application and click the page 1, page 2 and page 3 links. What you'll notice is that there is a 2-second delay the first time you hit each page. That is because I added the following line to the Navigate method in MainPageViewModel: Thread.Sleep(2000); // Simulate a 2 second initial loading delay The reason I put this in there is that I wanted to simulate a delay the first time the page loads (as the .xap is being downloaded from the server). You'll notice that after the first hit to the page though that there is no delay...that's because the .xap has already been downloaded. Feel free to comment out this 2-second delay, or remove it if you'd like. I just wanted to show how subsequent hits to the page would be quicker than the initial one. By the way, you may want to display some sort of BusyIndicator while the .xap is loading. I have that in my Task-It appplication, but for the sake of simplicity I did not include it here. In the future I'll blog about how I show and hide the BusyIndicator using events (I'm currently using the eventing framework in Prism for that, but may move to the one in the MVVM Light Toolkit some time soon). Whew, that felt like a lot of steps, but it does work quite nicely. As I mentioned earlier, I'll try to find ways to simplify the code (I'd like to get away from having things like hard-coded .xap file names) and will blog about it in the future if I find a better way. In my next post, I'll talk more about what is actually happening with the code that makes this all work.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

CodePlex Daily Summary for Thursday, February 17, 2011

CodePlex Daily Summary for Thursday, February 17, 2011Popular ReleasesMarr DataMapper: Marr Datamapper 2.7 beta: - Changed QueryToGraph relationship rules: 1) Any parent entity (entity with children) must have at least one PK specified or an exception will be thrown 2) All 1-M relationship entities must have at least one PK specified or an exception will be thrown Only 1-1 entities with no children are allowed to have 0 PKs specified. - fixed AutoQueryToGraph bug (columns in graph children were being included in the select statement)datajs - JavaScript Library for data-centric web applications: datajs version 0.0.2: This release adds support for parsing DateTime and DateTimeOffset properties into javascript Date objects and serialize them back.thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.11): Features Added a new option that allows properties on data contract types to be marked as virtual. Bug Fixes Fixed a bug caused by certain project properties not being available on Web Service Software Factory projects. Fixed a bug that could result in the WrapperName value of the MessageContractAttribute being incorrect when the Adjust Casing option is used. The menu item code now caters for CommandBar instances that are not available. For example the Web Item CommandBar does not exist ...Document.Editor: 2011.5: Whats new for Document.Editor 2011.5: New export to email New export to image New document background color Improved Tooltips Minor Bug Fix's, improvements and speed upsTerminals: Version 2 - RC1: The "Clean Install" will overwrite your log4net configuration (if you have one). If you run in a Portable Environment, you can use the "Clean Install" and target your portable folder. Tested and it works fine. Changes for this release: Re-worked on the Toolstip settings are done, just to avoid the vs.net clash with auto-generating files for .settings files. renamed it to .settings.config Packged both log4net and ToolStripSettings files into the installer Upgraded the version inform...Export Test Cases From TFS: Test Case Export to Excel 1.0: Team Foundation Server (TFS) 2010 enables the users to manage test cases as Work Item(s). The complete description of the test case along with steps can be managed as single Work Item in TFS 2010. Before migrating to TFS 2010 many test teams will be using MS Excel to manage the test cases (or test scripts). However, after migrating to TFS 2010, test teams can manage the test cases in the server but there may be need to get the test cases into excel sheet like approval from Business Analysts ...WriteableBitmapEx: WriteableBitmapEx 0.9.7.0: Fixed many bugs. Added the Rotate method which rotates the bitmap in 90° steps clockwise and returns a new rotated WriteableBitmap. Added a Flip method with support for FlipMode.Vertical and FlipMode.Horizontal. Added a new Filter extension file with a convolution method and some kernel templates (Gaussian, Sharpen). Added the GetBrightness method, which returns the brightness / luminance of the pixel at the x, y coordinate as byte. Added the ColorKeying BlendMode. Added boundary ...AllNewsManager.NET: AllNewsManager.NET 1.3: AllNewsManager.NET 1.3. This new version provide several new features, improvements and bug fixes. Some new features: Online Users. Avatars. Copy function (to create a new article from another one). SEO improvements (friendly urls). New admin buttons. And more...Facebook Graph Toolkit: Facebook Graph Toolkit 0.8: Version 0.8 (15 Feb 2011)moved to Beta stage publish photo feature "email" field of User object added new Graph Api object: Group, Event new Graph Api connection: likes, groups, eventsDJME - The jQuery extensions for ASP.NET MVC: DJME2 -The jQuery extensions for ASP.NET MVC beta2: The source code and runtime library for DJME2. For more product info you can goto http://www.dotnetage.com/djme.html What is new ?The Grid extension added The ModelBinder added which helping you create Bindable data Action. The DnaFor() control factory added that enabled Model bindable extensions. Enhance the ListBox , ComboBox data binding.Jint - Javascript Interpreter for .NET: Jint - 0.9.0: New CLR interoperability features Many bugfixesBuild Version Increment Add-In Visual Studio: Build Version Increment v2.4.11046.2045: v2.4.11046.2045 Fixes and/or Improvements:Major: Added complete support for VC projects including .vcxproj & .vcproj. All padding issues fixed. A project's assembly versions are only changed if the project has been modified. Minor Order of versioning style values is now according to their respective positions in the attributes i.e. Major, Minor, Build, Revision. Fixed issue with global variable storage with some projects. Fixed issue where if a project item's file does not exist, a ...Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.1: Coding4Fun.Phone.Toolkit v1.1 release. Bug fixes and minor feature requests addedTV4Home - The all-in-one TV solution!: 0.1.0.0 Preview: This is the beta preview release of the TV4Home software.Finestra Virtual Desktops: 1.2: Fixes a few minor issues with 1.1 including the broken per-desktop backgrounds Further improves the speed of switching desktops A few UI performance improvements Added donations linksNuGet: NuGet 1.1: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. The URL to the package OData feed is: http://go.microsoft.com/fwlink/?LinkID=206669 To see the list of issues fixed in this release, visit this our issues listEnhSim: EnhSim 2.4.0: 2.4.0This release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Changes since 2.3.0 - Upd...Sterling Isolated Storage Database with LINQ for Silverlight and Windows Phone 7: Sterling OODB v1.0: Note: use this changeset to download the source example that has been extended to show database generation, backup, and restore in the desktop example. Welcome to the Sterling 1.0 RTM. This version is not backwards-compatible with previous versions of Sterling. Sterling is also available via NuGet. This product has been used and tested in many applications and contains a full suite of unit tests. You can refer to the User's Guide for complete documentation, and use the unit tests as guide...PDF Rider: PDF Rider 0.5.1: Changes from the previous version * Use dynamic layout to better fit text in other languages * Includes French and Spanish localizations Prerequisites * Microsoft Windows Operating Systems (XP - Vista - 7) * Microsoft .NET Framework 3.5 runtime * A PDF rendering software (i.e. Adobe Reader) that can be opened inside Internet Explorer. Installation instructionsChoose one of the following methods: 1. Download and run the "pdfRider0.5.1-setup.exe" (reccomended) 2. Down...Snoop, the WPF Spy Utility: Snoop 2.6.1: This release is a bug fixing release. Most importantly, issues have been seen around WPF 4.0 applications not always showing up in the app chooser. Hopefully, they are fixed now. I thought this issue warranted a minor release since more and more people are going WPF 4.0 and I don't want anyone to have any problems. Dan Hanan also contributes again with several usability features. Thanks Dan! Happy Snooping! p.s. By request, I am also attaching a .zip file ... so that people can install it ...New ProjectsAlpe d'HuZes: This project contains the source for Alpe d'HuZes, an organization that fights the cancer disease, by giving people the chance to ride the Alpe d'Hues, a mountain in france. By climbing this mountain, money is collected which is entirely donated to the "kankerbestrijding".AstroLib: Astronomical libraryDevon: Devon_Projectearthquake predictor: This project is attempt to create earthquake prediction application , which can help save lives. It is based on theory that number of lost pets, before earthquake, growing up. This statistics can be obtained from free news papers, boards, forums... Technology : C#, ASPX, .NET 4FCNS.Calendar: FCNS.Calendar ??? MonoCalendar(?????????) ?.NET??????????，??????Mac???????????????iCal?????。???????????.??????????.?????????????????.????????????????. FlashRelease [O-GO.ru edition]: FlashRelease it's a tool for easy create description of new video\music\game torrent releases. Developed in Delphi.Forms based authentication for SharePoint2010: Forms based authentication Management features for SharePoint 2010. <a href="http://www.softwarediscipline.com/post/2011/01/03/Forms-based-authentication-feature-SharePoint-2010.aspx" alt="SharePoint 2010 FBA management feature">SharePoint 2010 FBA feature</a>ITune.LittleTools: Reads your ITune library and copy your track rating in ITune on to your file in windows.MingleProject: Just a simple project that showcases the power of ASP.NET and Visual StudioMvcContrib UI Extensions - Themed Grid & Menu: UI Extensions to the MvcContrib Project - Themed Grid & MenuNDOS Azure: Windows Azure projects developed at the "Open Source and Interoperability Development Nucleous" (http://ndos.codeplex.com/) at Universidade Federal do Rio Grande do Sul (http://www.ufrgs.br).ObjectDumper: ObjectDumper takes a normal .NET object and dumps it to a string, TextWriter, or file. Handy for debugging purposes.Open Analytic: Open Analytic is an open source business intelligence framework that believes in simplicity. The framework is developed with .NET language and can be easily integrated in custom product development.Pomodoro.Oob Expression Blend Example App: This is a non-functional Silverlight 4 Out-of-Browser app to demonstrate functionality in Expression Blend and to accompany user group talks and presentations on Blend.Senior Design: Uconn senior design project!Service Monitors - A services health monitoring tool: The idea behind this project is simple, I want to know when a service related to my application is not available. Our first intent to get a tool to generete the necessary data to be compliant with the Availability SLA of our systems. SGO: OrganizerSina Weibo QReminder: A handy utility that display remind message in the browser title for sina weibo.System Center Configuration Manager Integration Pack Extention: This integration pack adds some additional integration points for Opalis to System Center Configuration Manager. These functions are used in my User Self imaging workflow that will be demoed at MMS 2011.TwittaFox: TwittaFox ist ein kleiner Twitter-Client welcher direkt aus dem Tray angesprochen werden kann.Ultralight Markup: Ultralight Markup makes it easier for webmasters to allow safe user comments. It features a stripped-down intermediate markup language meant to bridge the gap between text entry and HTML. And the project includes an ASP.NET MVC implementation with a Javascript editor.Unit Conversion Library: Unit Conversion Library is a .Net 2.0 based library, containing static methods for all the Units Set present in Windows 7 calculator. "Angle", "Area", "Energy", "Length", "Power", "Pressure", "Temperature",Time", "Velocity", "Volume", "Weight/Mass".UTB-PFIII-TermProj-Team DeLaFuente, Vasquez, Morales, Dartez: This is the group project for UTB-PFIII Team project. Authors include David De La Fuente, Louis Dartez, Juan Vasquez and Froylan Morales.Version History to InfoPath Custom List Form: The ability to add a button to view the version history of an item when the display form is modified in InfoPath allows a user easy access to view versioning information. Out of the box, SharePoint does not allow this ability. This is a sandboxed solution.WeatherCN - ????: WeatherCN - ????WinformsPOCMVP: This is a simple, and small proof of concept for the Model View Presenter UI design pattern with C# WinForms.worldbestwebsites: Customer Connecting Websites A website development for customer connecting

Read the article

CodePlex Daily Summary for Friday, March 02, 2012

CodePlex Daily Summary for Friday, March 02, 2012Popular ReleasesMedia Companion: MC 3.433b Release: General More GUI tweaks (mostly imperceptible!) Updates for mc_com.exe TV The 'Watched' button has been re-instigated Added TV Menu sub-option to search ALL for new Episodes (includes locked shows) Movies Added 'Source' field (eg DVD, Bluray, HDTV), customisable in Advanced Preferences (try it out, let us know how it works!) Added HTML <<format>> tag with optional parameters for video container, source, and resolution (updated HTML tags to be added to Documentation shortly) Known Issu...Picturethrill: Version 2.3.2.0: Release includes Self-Update feature for Picturethrill. What that means for users is that they are always guaranteed to have a fresh copy of Picturethrill on their computers with all latest fixes. When Picturethrill adds a new website to get pictures from, you will get it too!THE NVL Maker: The NVL Maker Ver 3.11: SIM??????，TRA??????， ????????????????，??????~（??????????????????） ??： 115?? ???? http://115.com/file/bewo7t11#THENVLMakerver3.11sim.zip MediaFire ???? http://www.mediafire.com/?wj9dmk3eb70mdzt 3.11 ??? ???： ·????????????UNICODE????????????????????（??Data.xp3） ·?????.?（https://sites.google.com/site/hiyuadv/） ?????????krkrcht.exe ·?????????Editor.exe，????????krkrcht.exe?? ??： ·Wizard.exe??，BUG??，?????????????? ·????（Code）???，???????????????， ·??3.10?，???????????????，?????????????? ...Simple MVVM Toolkit for Silverlight, WPF and Windows Phone: Simple MVVM Toolkit v3.0.0.0: Added support for Silverlight 5.0 and Windows Phone 7.1. Upgraded project templates and samples. Upgraded installer. There are some new prerequisites required for this version, namely Silverlight 5 Tools, Expression Blend Preview for Silverlight 5 (until the SDK is released), Windows Phone 7.1 SDK. Because it is in the experimental band, I have also removed the dependency on the Silverlight Testing Framework. You can use it if you wish, but the Ria Services project template no longer uses ...CODE Framework: 4.0.20301: The latest version adds a number of new features to the WPF system (such as stylable and testable messagebox support) as well as various new features throughout the system (especially in the Utilities namespace).MyRouter (Virtual WiFi Router): MyRouter 1.0.1 (Beta): A friendlier User Interface. A logger file to catch exceptions so you may send it to use to improve and fix any bugs that may occur. A feedback form because we always love hearing what you guy's think of MyRouter. Check for update menu item for you to stay up to date will the latest changes. Facebook fan page so you may spread the word and share MyRouter with friends and family And Many other exciting features were sure your going to love!WPF Sound Visualization Library: WPF SVL 0.3 (Source, Binaries, Examples, Help): Version 0.3 of WPFSVL. This includes three new controls: an equalizer, a digital clock, and a time editor.Cocktail: Cocktail v0.4: PrerequisitesVisual Studio 2010 with SP1 (any edition but Express) SQL Server Express (included automatically with most Visual Studio installs) Optional: Silverlight 4 or 5 Note: Install Silverlight 4 Tools and then the Silverlight 4 Toolkit. Likewise for Silverlight 5 Tools and the Silverlight 5 Toolkit DevForce Universal Express 6.1.6 or greater Included in the Cocktail download, DevForce Universal Express requires registration) Important: Install DevForce after all other compo...ZXing.Net: ZXing.Net 0.4.0.0: sync with rev. 2196 of the java version important fix for RGBLuminanceSource generating barcode bitmaps Windows Phone demo client (only tested with emulator, because I don't have a Windows Phone) Barcode generation support for Windows Forms demo client Webcam support for Windows Forms demo clientOrchard Project: Orchard 1.4: Please read our release notes for Orchard 1.4: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-Notes.NET Assembly Information: Assembly Information 2.1.0.1: - Fixed the issue in which AnyCPU binaries were shown as 32bit - Added support to show the errors in-case if some dlls failed to load.FluentData -Micro ORM with a fluent API that makes it simple to query a database: FluentData version 1.2: New features: - QueryValues method - Added support for automapping to enumerations (both int and string are supported). Fixed 2 reported issues.NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.15: 3.6.0.15 28-Feb-2012 • Fix: The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Work Item 10435: http://netsqlazman.codeplex.com/workitem/10435 • Fix: Made StorageCache thread safe. Thanks to tangrl. • Fix: Members property of SqlAzManApplicationGroup is not functioning. Thanks to tangrl. Work Item 10267: http://netsqlazman.codeplex.com/workitem/10267 • Fix: Indexer are making database calls. Thanks to t...SCCM Client Actions Tool: Client Actions Tool v1.1: SCCM Client Actions Tool v1.1 is the latest version. It comes with following changes since last version: Added stop button to stop the ongoing process. Added action "Query update status". Added option "saveOnlineComputers" in config.ini to enable saving list of online computers from last session. Default value for "LatestClientVersion" set to SP2 R3 (4.00.6487.2157). Wuauserv service manual startup mode is considered healthy on Windows 7. Errors are now suppressed in checkReleases...Document.Editor: 2012.1: Whats new for Document.Editor 2012.1: Improved Recent Documents list Improved Insert Shape Improved Dialogs Minor Bug Fix's, improvements and speed upsSharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8: API Updates: SOLID Extract Method for Archives (7Zip and RAR). ExtractAllEntries method on Archive classes will extract archives as a streaming file. This can offer better 7Zip extraction performance if any of the entries are solid. The IsSolid method on 7Zip archives will return true if any are solid. Removed IExtractionListener was removed in favor of events. Unit tests show example. Bug fixes: PPMd passes tests plus other fixes (Thanks Pavel) Zip used to always write a Post Descri...Social Network Importer for NodeXL: SocialNetImporter(v.1.3): This new version includes: - Download new networks for Facebook fan pages. - New options for downloading more posts - Bug fixes To use the new graph data provider, do the following: Unzip the Zip file into the "PlugIns" folder that can be found in the NodeXL installation folder (i.e "C:\Program Files\Social Media Research Foundation\NodeXL Excel Template\PlugIns") Open NodeXL template and you can access the new importer from the "Import" menuContent Slider Module for DotNetNuke: 01.02.00: This release has the following updates and new features: Feature: One-Click Enabling of Pager Setting Feature: Cache Sliders for Performance Feature: Configurable Cache Setting Enhancement: Transitions can be Selected Bug: Secure Folder Images not Viewable Bug: Sliders Disappear on Postback Bug: Remote Images Cause Error Bug: Deleted Images Cause Error System Requirements DotNetNuke v06.00.00 or newer .Net Framework v3.5 SP1 or newer SQL Server 2005 or newerImage Resizer for Windows: Image Resizer 3 Preview 3: Here is yet another iteration toward what will eventually become Image Resizer 3. This release is stable. However, I'm calling it a preview since there are still many features I'd still like to add before calling it complete. Updated on February 28 to fix an issue with installing on multi-user machines. As usual, here is my progress report. Done Preview 3 Fix: 3206 3076 3077 5688 Fix: 7420 Fix: 7527 Fix: 7576 7612 Preview 2 6308 6309 Fix: 7339 Fix: 7357 Preview 1 UI...Finestra Virtual Desktops: 2.5.4500: This is a bug fix release for version 2.5. It fixes several things and adds a couple of minor features. See the 2.5 release notes for more information on the major new features in that version. Important - If Finestra crashes on startup for you, you must install the Visual C++ 2010 runtime from http://www.microsoft.com/download/en/details.aspx?id=5555. Fixes a bug with window animations not refreshing the screen on XP and with DWM off Fixes a bug with with crashing on XP due to a bug in t...New ProjectsaSMS.dll: aSMS.dll is an open source library to provide developer to convert a message (SMS) to PDU and convert PDU to message (SMS). aSMS.dll can be consumed by Windows Form Application, Windows Presentation Fundation, Console Application, ASP.NET Web Application, etc.Convert Number To Letter: you can convert number to persian Letter. ?????? ??? ?????? ???????? ??? ???? ??? ?? ?? ???? ????? ????? ????CRM 2011 Remove Children From Parent Entity Form: This CRM 2011 solution will allow to Remove Child entity records from Parent Entity Form.Cygnus: Cygnus v2GovDev for TFS: Microsoft Team Foundation Server (TFS) 2010 is the collaboration platform at the core of Microsoft’s application lifecycle management solution. In addition to core features like source control, build automation and work-item tracking, TFS enables teams to align projects with industry processes such as Agile, Scrum and CMMi via the use of customable XML Process Templates. Since 2005, TFS has been a welcomed addition to the Microsoft developer tool line-up by Government Agencies of all siz...Historia: Historia est un logiciel d'aide à la création de roman.Infiltrator - code profiler module for Orchard: Infiltrator is a simple profiler for Orchard, built as a module. Metro App: The Metro App for Windows 8Mouse Gesture Library: <Mouse Gesture Library> makes it easier for <.net Framework users> to build <WPF Applications>Netduino Multithreaded Webserver and DataLogger: Home logger is for logging sensor outputs and serving the collected data via webpages. It runs on the Netduino Plus. Using the .net micro framework 4.2 Written in C#. 1 x logging thread 1 x web dispatcher thread 4 x request handler threads (configurable) Also includes text file upload. Not much space left.Orchard DateTimeRange: DateTimeRange is a module for the Orchard CMS 1.4 (http://orchardproject.net/). It is a Module that adds an extra field that you can use in your content types. The field contains a configurable start - end date/time range or period. It is developed in C#, ASP.Net MVC and works with Orchard CMS 1.4 or higher.QLTB: Qu?n Lý Thi?t B? 2012QuickSpecsFinder: Una piccola utilità, abbozzata, per il recupero delle info di base di un personal computer (Memoria, Disco, Processore...)Simple Interpreted Assembler: Simple Interpreted Assembler is an IDE + Interpreter for a simplistic Assembly looking language I created. It is stack based ala' the CIL found in .NET.SkyWay: Sandbox mmo gametesttom03012012hg01: testtom03012012hg01testtom03012012hg04: testtom03012012hg04testtom03012012tfs02: testtom03012012tfs02Tiny Forum: The forum application built upon apworks framework.UPS Address Validation: Library uses UPS Address Validation API to validate address with possible parameters such as city, State, postal code, and etc. Additional information can be found at [url:https://www.ups.com/upsdeveloperkit/downloadresource?loc=en_US]. A sample test program validates all postal codes.Visual Studio LightSwitch application DB script generator: Introduction: ExportDatabaseScript tool is used to generate Sql server DB script from the LightSwitch internal database. Take a situation, We are developing the LightSwitch business application and we are using the internal database [ApplicationData] for storing Data. As our apW8Hackathon2012: W8Hackathon2012Windows Phone Commands for VS2010: The Windows Phone Commands is an open-source project built on top of. Microsoft Net 4.0, framework. This effort provides a powerful tool to assist the development phone for windows 7.1 as Isolate Storage Explorer (with copies of folders and files), Deployer, Build integrated, etc.Zdravlje na kvadrat: Program za vodenje fitness centra.ZobiesOnYourLawn-express: java learn

Read the article

Quick Quips on QR Codes

- by Tim Dexter

Yes, I'm an alliterating all-star; I missed my calling as a newspaper headline writer. I have recently received questions from several folks on support for QR codes. You know them they are everywhere you look, even here! How does Publisher handle QR codes then? In theory, exactly the same way we handle any other 2D barcode font. We need the font file, a mapping entry and an encoding class. With those three pieces we can embed QR codes into any output. To test the theory, I went off to IDAutomation, I have worked with them and many customers over the years and their fonts and encoders have worked great and have been very reliable. They kindly provide demo fonts which has made my life so much easier to be able to write posts like this. Their QR font and encoder is a little tough to find. I started here and then hit the Demo Now button. On the next page I hit the right hand Demo Now button. In the resulting zip file you'll need two files: AdditionalFonts.zip >> Automation2DFonts >> TrueType >> IDAutomation2D.ttf Java Class Encoder >> IDAutomation_JavaFontEncoder_QRCode.jar - the QRBarcodeExample.java is useful to see how to call the encoder. The font file needs to be installed into the windows/fonts directory, just copy and paste it in using file explorer and windows will install it for you. Remember, we are using the demo font here and you'll see if you get your phones decoder to looks a the font above there is a fixed string 'DEMO' at the beginning. You want that removed? Go buy the font from the IDAutomation folks. The Encoder Next you need to create your encoding wrapper class. Publisher does ship a class but its compiled and I do not recommend trying to modify it, you can just build your own. I have loaded up my class here. You do not need to be a java guru, its pretty straightforward. I'd recommend a java IDE like JDeveloper from a convenience point of view. I have annotated my class and added a main method to it so you can test your encoders from JDeveloper without having to deploy them first. You can load up the project form the zip file straight into JDeveloper.Next, take a look at IDAutomation's example java class and you'll see: QRCodeEncoder qre=new QRCodeEncoder(); String DataToEncode = "IDAutmation Inc."; boolean ApplyTilde = false; int EncodingMode = 0; int Version = 0; int ErrorCorrectionLevel = 0; System.out.println( qre.FontEncode(DataToEncode, ApplyTilde, EncodingMode, Version, ErrorCorrectionLevel) ); You'll need to check what settings you need to set for the ApplyTilde, EncodingMode, Version and ErrorCorrectionLevel. They are covered in the user guide from IDAutomation here. If you do not want to hard code the values in the encoder then you can quite easily externalize them and read the values from a text file. I have not covered that scenario here, I'm going with IDAutomation's defaults and my phone app is reading the fonts no problem. Now you know how to call the encoder, you need to incorporate it into your encoder wrapper class. From my sample class: Class[] clazz = new Class[] { "".getClass() }; ENCODERS.put("code128a",mUtility.getClass().getMethod("code128a", clazz)); ENCODERS.put("code128b",mUtility.getClass().getMethod("code128b", clazz)); ENCODERS.put("code128c",mUtility.getClass().getMethod("code128c", clazz)); ENCODERS.put("qrcode",mUtility.getClass().getMethod("qrcode", clazz)); I just added a new entry to register the encoder method 'qrcode' (in red). Then I created a new method inside the class to call the IDAutomation encoder. /** Call to IDAutomations QR Code encoder. Passing the data to encode Returning the encoded string to the template for formatting **/ public static final String qrcode (String DataToEncode) { QRCodeEncoder qre=new QRCodeEncoder(); boolean ApplyTilde = false; int EncodingMode = 0; int Version = 0; int ErrorCorrectionLevel = 0; return qre.FontEncode(DataToEncode, ApplyTilde, EncodingMode, Version, ErrorCorrectionLevel); } Almost the exact same code in their sample class. The DataToEncode string is passed in rather than hardcoded of course. With the class done you can now compile it, but you need to ensure that the IDAutomation_JavaFontEncoder_QRCode.jar is in the classpath. In JDeveloper, open the project properties >> Libraries and Classpaths and then add the jar to the list. You'll need the publisher jars too. You can find those in the jlib directory in your Template Builder for Word directory.Note! In my class, I have used package oracle.psbi.barcode; As my package spec, yours will be different but you need to note it for later. Once you have it compiling without errors you will need to generate a jar file to keep it in. In JDeveloper highlight your project node >> New >> Deployment Profile >> JAR file. Once you have created the descriptor, just take the defaults. It will tell you where the jar is located. Go get it and then its time to copy it and the IDAutomation jar into the Template Builder for Word directory structure. Deploying the jars On your windows machine locate the jlib directory under the Template Builder for Word install directory. On my machine its here, F:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\jlib. Copy both of the jar files into the directory. The next step is to get the jars into the classpath for the Word plugin so that Publisher can find your wrapper class and it can then find the IDAutomation encoder. The most consistent way I have found so far, is to open up the RTF2PDF.jar in the same directory and make some mods. First make a backup of the jar file then open it using winzip or 7zip or similar and get into the META-INF directory. In there is a file, MANIFEST.MF. This contains the classpath for the plugin, open it in an editor and add the jars to the end of the classpath list. In mine I have: Manifest-Version: 1.0 Class-Path: ./activation.jar ./mail.jar ./xdochartstyles.jar ./bicmn.jar ./jewt4.jar ./share.jar ./bipres.jar ./xdoparser.jar ./xdocore.jar ./xmlparserv2.jar ./xmlparserv2-904.jar ./i18nAPI_v3.jar ./versioninfo.jar ./barcodejar.jar ./IDAutomation_JavaFontEncoder_QRCode.jar Main-Class: RTF2PDF I have put in carriage returns above to make the Class-Path: entry more readable, make sure yours is all on one line. Be sure to use the ./ as a prefix to the jar name. Ensure the file is saved inside the jar file 7zip and winzip both have popups asking if you want to update the file in the jar file.Now you have the jars on the classpath, the Publisher plugin will be able to find our classes at run time. Referencing the Font The next step is to reference the font location so that the rendering engine can find it and embed a subset into the PDF output. Remember the other output formats rely on the font being present on the machine that is opening the document. The PDF is the only truly portable format. Inside the config directory under the Template Builder for Word install directory, mine is here, F:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\config. You'll find the file, 'xdo example.cfg'. Rename it to xdo.cfg and open it in a text editor. In the fonts section, create a new entry: <font family="IDAutomation2D" style="normal" weight="normal"> <truetype path="C:\windows\fonts\IDAutomation2D.ttf" /> </font> Note, 'IDAutomation2D' (in red) is the same name as you can see when you open MSWord and look for the QRCode font. This must match exactly. When Publisher looks at the fonts in the RTF template at runtime it will see 'IDAutomation2D' it will then look at its font mapping entries to find where that font file resides on the disk. If the names do not match or the font is not present then the font will not get used and it will fall back on Helvetica. Building the Template Now you have the data encoder and the font in place and mapped; you can use it in the template. The two commands you will need to have present are: <?register-barcode-vendor:'ENCODER WRAPPER CLASS'; 'ENCODER NAME'?> for my encoder I have: <?register-barcode-vendor:'oracle.psbi.barcode.BarcodeUtil'; 'MyBarcodeEncoder'?> Notice the two parameters for the command. The first provides the package 'path' and class name (remember I said you need to remember that above.)The second is the name of the encoder, in my case 'MyBarcodeEncoder'. Check my full encoder class in the zip linked below to see where I named it. You can change it to something else, no problem.This command needs to be near the top of the template. The second command is the encoding command: <?format-barcode:DATAT_TO_ENCODE;'ENCODER_METHOD_NAME';'ENCODER_NAME'?> for my command I have <?format-barcode:DATATEXT;'qrcode';'MyBarcodeEncoder'?>DATATEXT is the XML element that contains the text to be encoded. If you want to hard code a piece of text just surround it with single quotes. qrcode is the name of my encoder method that calls the IDAutomation encoder. Remember this.MyBarcodeEncoder is the name of my encoder. Repetition? Yes but its needed again. Both of these commands are put inside their own form fields. Do not apply the QRCode font to the second field just yet. Lets make sure the encoder is working. Run you template with some data and you should get something like this for your encoded data: AHEEEHAPPJOPMOFADIPFJKDCLPAHEEEHA BNFFFNBPJGMDIDJPFOJGIGBLMPBNFFFNB APIBOHFJCFBNKHGGBMPFJFJLJBKGOMNII OANKPJFFLEPLDNPCLMNGNIJIHFDNLJFEH FPLFLHFHFILKFBLOIGMDFCFLGJGOPJJME CPIACDFJPBGDODOJCHALJOBPECKMOEDDF MFFNFNEPKKKCHAIHCHPCFFLDAHFHAGLMK APBBBPAPLDKNKJKKGIPDLKGMGHDDEPHLN HHHHHHHPHPHHPHPPHPPPPHHPHHPHPHPHP Grooovy huh? If you do not get the encoded text then go back and check that your jars are in the right spot and that you have the MANIFEST.MF file updated correctly. Once you do get the encoded text, highlight the field and apply the IDAutomation2D font to it. Then re-run the report and you will hopefully see the QR code in your output. If not, go back and check the xdo.cfg entry and make sure its in the right place and the font location is correct. That's it, you now have QR codes in Publisher outputs. Everything I have written above, has been tested with the 5.6.3, 10.1.3.4.2 codelines. I'll be testing the 11g code in the next day or two and will update you with any changes. One thing I have not covered yet and will do in the next few days is how to deploy all of this to your server. Look out for a follow up post. One note on the apparent white lines in the font (see the image above). Once printed they disappear and even viewing the code on a screen with the white lines, my phone app is still able to read and interpret the contents no problem. I have zipped up my encoder wrapper class as a JDeveloper 11.1.1.6 project here. Just dig into the src directories to find the BarcodeUtil.java file if you just want the code. I have put comments into the file to hopefully help the novice java programmer out. Happy QR'ing!

Read the article

How to add new filters to CAML queries in SharePoint 2007

- by uruit

Normal 0 21 false false false ES-UY X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} One flexibility SharePoint has is CAML (Collaborative Application Markup Language). CAML it’s a markup language like html that allows developers to do queries against SharePoint lists, it’s syntax is very easy to understand and it allows to add logical conditions like Where, Contains, And, Or, etc, just like a SQL Query. For one of our projects we have the need to do a filter on SharePoint views, the problem here is that the view it’s a list containing a CAML Query with the filters the view may have, so in order to filter the view that’s already been filtered before, we need to append our filters to the existing CAML Query. That’s not a trivial task because the where statement in a CAML Query it’s like this: <Where> <And> <Filter1 /> <Filter2 /> </And> </Where> If we want to add a new logical operator, like an OR it’s not just as simple as to append the OR expression like the following example: <Where> <And> <Filter1 /> <Filter2 /> </And> <Or> <Filter3 /> </Or> </Where> But instead the correct query would be: <Where> <Or> <And> <Filter1 /> <Filter2 /> </And> <Filter3 /> </Or> </Where> Notice that the <Filter# /> tags are for explanation purpose only. In order to solve this problem we created a simple component, it has a method that receives the current query (could be an empty query also) and appends the expression you want to that query. Example: string currentQuery = @“ <Where> <And> <Contains><FieldRef Name='Title' /><Value Type='Text'>A</Value></Contains> <Contains><FieldRef Name='Title' /><Value Type='Text'>B</Value></Contains> </And> </Where>”; currentQuery = CAMLQueryBuilder.AppendQuery( currentQuery, “<Contains><FieldRef Name='Title' /><Value Type='Text'>C</Value></Contains>”, CAMLQueryBuilder.Operators.Or); The fist parameter this function receives it’s the actual query, the second it’s the filter you want to add, and the third it’s the logical operator, so basically in this query we want all the items that the title contains: the character A and B or the ones that contains the character C. The result query is: <Where> <Or> <And> <Contains><FieldRef Name='Title' /><Value Type='Text'>A</Value></Contains> <Contains><FieldRef Name='Title' /><Value Type='Text'>B</Value></Contains> </And> <Contains><FieldRef Name='Title' /><Value Type='Text'>C</Value></Contains> </Or> </Where> The code: First of all we have an enumerator inside the CAMLQueryBuilder class that has the two possible Options And, Or. public enum Operators { And, Or } Then we have the main method that’s the one that performs the append of the filters. public static string AppendQuery(string containerQuery, string logicalExpression, Operators logicalOperator){ In this method the first we do is create a new XmlDocument and wrap the current query (that may be empty) with a “<Query></Query>” tag, because the query that comes with the view doesn’t have a root element and the XmlDocument must be a well formatted xml. XmlDocument queryDoc = new XmlDocument(); queryDoc.LoadXml("<Query>" + containerQuery + "</Query>"); The next step is to create a new XmlDocument containing the logical expression that has the filter needed. XmlDocument logicalExpressionDoc = new XmlDocument(); logicalExpressionDoc.LoadXml("<root>" + logicalExpression + "</root>"); In these next four lines we extract the expression from the recently created XmlDocument and create an XmlElement. XmlElement expressionElTemp = (XmlElement)logicalExpressionDoc.SelectSingleNode("/root/*"); XmlElement expressionEl = queryDoc.CreateElement(expressionElTemp.Name); expressionEl.InnerXml = expressionElTemp.InnerXml; Below are the main steps in the component logic. The first “if” checks if the actual query doesn’t contains a “Where” clause. In case there’s no “Where” we add it and append the expression. In case that there’s already a “Where” clause, we get the entire statement that’s inside the “Where” and reorder the query removing and appending elements to form the correct query, that will finally filter the list. XmlElement whereEl; if (!containerQuery.Contains("Where")) { queryDoc.FirstChild.AppendChild(queryDoc.CreateElement("Where")); queryDoc.SelectSingleNode("/Query/Where").AppendChild(expressionEl); } else { whereEl = (XmlElement)queryDoc.SelectSingleNode("/Query/Where"); if (!containerQuery.Contains("<And>") && !containerQuery.Contains("<Or>")) { XmlElement operatorEl = queryDoc.CreateElement(GetName(logicalOperator)); XmlElement existingExpression = (XmlElement)whereEl.SelectSingleNode("/Query/Where/*"); whereEl.RemoveChild(existingExpression); operatorEl.AppendChild(existingExpression); operatorEl.AppendChild(expressionEl); whereEl.AppendChild(operatorEl); } else { XmlElement operatorEl = queryDoc.CreateElement(GetName(logicalOperator)); XmlElement existingOperator = (XmlElement)whereEl.SelectSingleNode("/Query/Where/*"); whereEl.RemoveChild(existingOperator); operatorEl.AppendChild(existingOperator); operatorEl.AppendChild(expressionEl); whereEl.AppendChild(operatorEl); } } return queryDoc.FirstChild.InnerXml } Finally the GetName method converts the Enum option to his string equivalent. private static string GetName(Operators logicalOperator) { return Enum.GetName(typeof(Operators), logicalOperator); } Normal 0 21 false false false ES-UY X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 21 false false false ES-UY X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} This component helped our team a lot using SharePoint 2007 and modifying the queries, but now in SharePoint 2010; that wouldn’t be needed because of the incorporation of LINQ to SharePoint. This new feature enables the developers to do typed queries against SharePoint lists without the need of writing any CAML code. But there is still much development to the 2007 version, so I hope this information is useful for other members. Post Normal 0 21 false false false ES-UY X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} written by Sebastian Rodriguez - Portals and Collaboration Solutions @ UruIT

Search Results

Search found 33453 results on 1339 pages for 'alias method'.

Page 382/1339 | < Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389 | Next Page >

- by AGS777

- by CJM

- by Fathom Savvy

- by hmloo

- by usha

- by MKK

- by Daniel Moth

- by TheBroodian

- by nikolaosk

- by MOSSLover

- by arungupta

- by jamiet

- by bodycountPP

- by SeanMcAlinden

- by dwahlin

- by Rick Strahl

- by srkirkland

- by A Student at a University

- by Tim Dexter

- by uruit

< Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389 | Next Page >