current dir - Page 382 - Developer IT

Screenshot Tour: Ubuntu Touch 14.04 on a Nexus 7

- by Chris Hoffman

Ubuntu 14.04 LTS will “form the basis of the first commercially available Ubuntu tablets,” according to Canonical. We installed Ubuntu Touch 14.04 on our own hardware to see what those tablets will be like. We don’t recommend installing this yourself, as it’s still not a polished, complete experience. We’re using “Ubuntu Touch” as shorthand here — apparently this project’s new name is “Ubuntu For Devices.” The Welcome Screen Ubuntu’s touch interface is all about edge swipes and hidden interface elements — it has a lot in common with Windows 8, actually. You’ll see the welcome screen when you boot up or unlock a Ubuntu tablet or phone. If you have new emails, text messages, or other information, it will appear on this screen along with the time and date. If you don’t, you’ll just see a message saying “No data sources available.” The Dash Swipe in from the right edge of the welcome screen to access the Dash, or home screen. This is actually very similar to the Dash on Ubuntu’s Unity desktop. This isn’t a surprise — Canonical wants the desktop and touch versions of Ubuntu to use the same code. In the future, the desktop and touch versions of Ubuntu will use the same version of Unity and Unity will adjust its interface depending on what type of device your’e using. Here you’ll find apps you have installed and apps available to install. Tap an installed app to launch it or tap an available app to view more details and install it. Tap the My apps or Available headings to view a complete list of apps you have installed or apps you can install. Tap the Search box at the top of the screen to start searching — this is how you’d search for new apps to install. As you’d expect, a touch keyboard appears when you tap in the Search field or any other text field. The launcher isn’t just for apps. Tap the Apps heading at the top of the screen and you’ll see hidden text appear — Music, Video, and Scopes. This hidden navigation is used throughout Ubuntu’s different apps and can be easy to miss at first. Swipe to the left or right to move between these screens. These screens are also similar to the different panels in Unity on the desktop. The Scopes section allows you to view different search scopes you have installed. These are used to search different sources when you start a search from the Dash. Search from the Music or Videos scopes to search for local media files on your device or media files online. For example, searching in the Music scope will show you music results from Grooveshark by default. Navigating Ubuntu Touch Swipe in from the left edge anywhere on the system to open the launcher, a bar with shortcuts to apps. This launcher is very similar to the launcher on the left of Ubuntu’s Unity desktop — that’s the whole idea, after all. Once you’ve opened an app, you can leave the app by swiping in from the left. The launcher will appear — keep moving your finger towards the right edge of teh screen. This will swipe the current app off the screen, taking you back to the Dash. Once back on the Dash, you’ll see your open apps represented as thumbnails under Recent. Tap a thumbnail here to go back to a running app. To remove an app from here, long-press it and tap the X button that appears. Swipe in from the right edge in any app to quickly switch between recent apps. Swipe in from the right edge and hold your finger down to reveal an application switcher that shows all your recent apps and lets you choose between them. Swipe down from the top of the screen to access the indicator panel. Here you can connect to Wi-Fi networks, view upcoming events, control GPS and Bluetooth hardware, adjust sound settings, see incoming messages, and more. This panel is for quick access to hardware settings and notifications, just like the indicators on Ubuntu’s Unity desktop. The Apps System settings not included in the pull-down panel are available in the System Settings app. To access it, tap My apps on the Dash and tap System Settings, search for the System Settings app, or open the launcher bar and tap the settings icon. The settings here a bit limited compared to other operating systems, but many of the important options are available here. You can add Evernote, Ubuntu One, Twitter, Facebook, and Google accounts from here. A free Ubuntu One account is mandatory for downloading and updating apps. A Google account can be used to sync contacts and calendar events. Some apps on Ubuntu are native apps, while many are web apps. For example, the Twitter, Gmail, Amazon, Facebook, and eBay apps included by default are all web apps that open each service’s mobile website as an app. Other applications, such as the Weather, Calendar, Dialer, Calculator, and Notes apps are native applications. Theoretically, both types of apps will be able to scale to different screen resolutions. Ubuntu Touch and Ubuntu desktop may one day share the same apps, which will adapt to different display sizes and input methods. Like Windows 8 apps, Ubuntu apps hide interface elements by default, providing you with a full-screen view of the content. Swipe up from the bottom of an app’s screen to view its interface elements. For example, swiping up from the bottom of the Web Browser app reveals Back, Forward, and Refresh buttons, along with an address bar and Activity button so you can view current and recent web pages. Swipe up even more from the bottom and you’ll see a button hovering in the middle of the app. Tap the button and you’ll see many more settings. This is an overflow area for application options and functions that can’t fit on the navigation bar. The Terminal app has a few surprising Easter eggs in this panel, including a “Hack into the NSA” option. Tap it and the following text will appear in the terminal: That’s not very nice, now tracing your location . . . . . . . . . . . .Trace failed You got away this time, but don’t try again. We’d expect to see such Easter eggs disappear before Ubuntu Touch actually ships on real devices. Ubuntu Touch has come a long way, but it’s still not something you want to use today. For example, it doesn’t even have a built-in email client — you’ll have to us your email service’s mobile website. Few apps are available, and many of the ones that are are just mobile websites. It’s not a polished operating system intended for normal users yet — it’s more of a preview for developers and device manufacturers. If you really want to try it yourself, you can install it on a Wi-Fi Nexus 7 (2013), Nexus 10, or Nexus 4 device. Follow Ubuntu’s installation instructions here.

Read the article

Azure Task Scheduling Options

- by charlie.mott

Currently, the Azure PaaS does not offer a distributed\resilient task scheduling service. If you do want to host a task scheduling product\solution off-premise (and ideally use Azure), what are your options? PaaS Option 1: Worker Roles Use a worker role to schedule and execute actions at specific time periods. There are a few frameworks available to assist with this: http://azuretoolkit.codeplex.com https://github.com/Lokad/lokad-cloud/wiki/TaskScheduler http://blog.smarx.com/posts/building-a-task-scheduler-in-windows-azure - This addresses a slightly different set of requirements. It’s a more dynamic approach for queuing up tasks, but not repeatable tasks (e.g. daily). I found the Azure Toolkit option the most simple to implement. Step 1 : Create a domain entity implementing IJob for each job to schedule. In this sample, I asynchronously call a WCF service method. 1: namespace Acme.WorkerRole.Jobs 2: { 3: using AzureToolkit; 4: using ScheduledTasksService; 5: 6: public class UploadEmployeesJob : IJob 7: { 8: public void Run() 9: { 10: // Call Tasks Service 11: var client = new ScheduledTasksServiceClient("BasicHttpBinding_IScheduledTasksService"); 12: client.UploadEmployees(); 13: client.Close(); 14: } 15: } 16: } Step 2 : In the worker role run method, add the jobs to the toolkit engine. 1: namespace Acme.WorkerRole 2: { 3: using AzureToolkit.Engine; 4: using Jobs; 5: 6: public class WorkerRole : WorkerRoleEntryPoint 7: { 8: public override void Run() 9: { 10: var engine = new CloudEngine(); 11: 12: // Add Scheduled Jobs (using CronJob syntax - see http://www.adminschoice.com/crontab-quick-reference). 13: 14: // 1. Upload Employee job - 8.00 PM every weekday (Mon-Fri) 15: engine.WithJobScheduler().ScheduleJob<UploadEmployeesJob>(c => { c.CronSchedule = "0 20 * * 1-5"; }); 16: // 2. Purge Data job - 10 AM every Saturday 17: engine.WithJobScheduler().ScheduleJob<PurgeDataJob>(c => { c.CronSchedule = "0 10 * * 6"; }); 18: // 3. Process Exceptions job - Every 5 minutes 19: engine.WithJobScheduler().ScheduleJob<ProcessExceptionsJob>(c => { c.CronSchedule = "*/5 * * * *"; }); 20: 21: engine.Run(); 22: base.Run(); 23: } 24: } 25: } Pros Cons Azure Toolkit option is simple to implement. For the AzureToolkit option, you are limited to a single worker role. Otherwise, the jobs will be executed multiple times, once for each worker role instance. Paying for a continuously running worker role, even if it just processes a single job once a week. If you only have a few scheduled tasks to run calling asynchronous services hosted in different web roles, an extra small worker role likely to be sufficient. However, for an extra small worker role this still costs $14.40/month (03/09/2012). Option 2: Use Scheduled Task on Azure Web Role calling a console app Setup a Windows Scheduled Task on the Azure Web Role. This calls a console application that calls the WCF service methods that run the task actions. This design is described here: http://www.ronaldwidha.net/2011/02/23/cron-job-on-azure-using-scheduled-task-on-a-web-role-to-replace-azure-worker-role-for-background-job/ http://www.voiceoftech.com/swhitley/index.php/2011/07/windows-azure-task-scheduler/ http://devlicio.us/blogs/vinull/archive/2011/10/23/moving-to-azure-worker-roles-for-nothing-and-tasks-for-free.aspx Pros Cons Fairly easy to implement. Supportability - I RDC’ed onto the Azure server and stopped the scheduled task. I then rebooted the machine and the task was re-started. I also tried deleting the task and rebooting, the same thing occurred. The only way to permanently guarantee that a task is disabled is to do a fresh deployment. I think this is a major supportability concern. Saleability - multiple instances would trigger multiple tasks. You can only have one instance for the scheduled task web role. The guidance implements setup of the scheduled task as part of a web role instance. But if you have more than one instance in a web role, the task will be triggered multiple times for each scheduled action (once per machine). Workaround: If we wanted to use scheduled tasks for another client with a saleable WCF service, then we could include the console & tasks scripts in a separate web role (e.g. a empty WCF service with no real purpose to it). SaaS Option 3: Azure Marketplace I thought that someone might be offering this type of service via the Azure marketplace. At the point of writing this blog post, I did not find anyone doing so. https://datamarket.azure.com/ Pros Cons Nobody currently offers this on the Azure Marketplace. Option 4: Online Job Scheduling Service Provider There are plenty of online providers that offer this type of service on a pay-as-you-go approach. Some of these are free for small usage. Many of these providers are listed here: http://en.wikipedia.org/wiki/Webcron Pros Cons No bespoke development for scheduler. Reliance on third party. IaaS Option 5: Setup Scheduling Software on Azure IaaS VM’s One of job scheduling software offerings could be installed and configured on Azure VM’s. A list of software options is listed here: http://en.wikipedia.org/wiki/List_of_job_scheduler_software Pros Cons Enterprise distributed\resilient task scheduling service VM Setup and maintenance Software Licence Costs Option 6: VM Gallery A the time of writing this blog post, I did not spot a VM in the gallery that included pre-installation of any of the above software options. Pros Cons No current VM template. Summary For my current project that had a small handful of tasks to schedule with a limited project budget I chose option 1 (a worker role using the Azure Toolkit to schedule tasks). If I was building an enterprise scale solution for the future, options 4 and 5 are currently worthy of consideration. Hopefully, Microsoft will include tasks scheduling in the future as part of their PaaS offerings.

Read the article

VNIC - New feature of AK8 - Working with VNICs

- by Steve Tunstall

One of the important new features of the AK8 code is the ability to use multiple IP addresses on the same physical network port. This feature is called VNICs, or Virtual NICs. This allows us to no longer "burn" a whole port in a cluster when one cluster peer owns a network port. Traditionally, we have had to leave Net0 empty on controller 2, because it was used for managing controller 1. Vise-versa for Net1 on Controller 1. Then, if you have data going over 10GigE ports, you probably only had half of your ports running at any given time, and the partner 10GigE port on the other controller just sat there, doing nothing, unless the first controller went down. What a waste. Those days are over. I want to thank and give a big shout-out to our good partner, OnX Enterprise Solutions, for allowing me to come into their lab and play around with their 7320 to do this demo. They let me make a big mess of their lab for the day as I played around with VNICs. If you're looking for a partner who knows Oracle well and can also piece together a solution from multiple vendors to get you what you need, OnX is a good choice. If you would like to talk to your local OnX rep, you can contact Scott Gill at [email protected] and he can point you in the right direction for your area. Here we go: Here is what your Datalinks window looks like BEFORE you upgrade to AK8. Here's what the same screen looks like after you upgrade. See the new box? So here is my current network setup. I have my 4 physical interfaces setup each with an IP address. If I ping them, no problems. So I can ping 180, 181, 251, and 252. However, if I try to ping 240, it does not work, as the 240 address is not being used by any of these interfaces, right?Let's change that. Here, I'm going to make a new Datalink by clicking the Datalink "Plus sign" button. I will check the VNIC box and tell it to use igb2, even though another interface is already using it. Now, I will create a new Interface, and choose "v_dl2" for it's datalink. My new network screen looks like this. A few things to take note of here. First, when I click the "igb2" device, it only highlights dl2 and int2. It does not highlight v_dl2 or v_int2.I think it should, but OK, it looks like VNICs don't highlight when you click the device. Second, note how the underscore character in v_dl2 and v_int2 do not seem to show on this screen. You can see it plainly if you go in and edit them, but from here it looks like a space instead of an underscore. Just a cosmetic bug, but something to be aware of. Now, if I click the VNIC datalink "v_dl2", on the other hand, it DOES highlight the device it belongs to, as it should. Seen here: Note that it did not, however, highlight int2 with it, even though int2 is connected to igb2. That's because we clicked v_dl2, which int2 has nothing to do with. So I'm OK with that. So let's try pinging 240 now. Of course, it works great. So I now make another VNIC, and call it v_dl3 using igb3, and v_int3 with an address of 241. I then setup three shares, using ports 251, 240, and 241.Remember that IP 251 and 240 both are using the same physical port of igb2, and IP 241 is using port igb3. Next, I copy a folder full of stuff over to all three shares at the same time. I have analytics going so I can see the traffic. My top chart is showing the logical interfaces, and the bottom chart is showing the physical ports.Sure enough, look at the igb2 and vnic1 interfaces. They equal the traffic going over the igb2 physical port on the second chart. VNIC2, on the other hand, gets igb3 all to itself. This would work the same way with 10Gig or Infiniband ports. You can now have multiple IP addresses and even completely different subnets sharing the same physical ports. You may need to make route table entries for that. This allows us to use all of the ports you paid for with no more waste. Very, very cool. One small "bug" I found when doing this. It's really not a bug, it was designed to do this when VNICs were not around. But now that we have NVIC capability, they should probably change this. I've alerted the engineering team about this and they're looking into it, so perhaps it will be fixed in a later code. Here it is. Remember when we made the new VNIC datalink, I specifically said to click on the "Plus Sign" button to create it? I don't always do that. I really like to use the drag-and-drop method to create my datalinks in the network screen.HOWEVER, if you were to do that for building a VNIC, it will mess you up a little. Watch this. Here, I'm dragging igb3 over to make a new datalink. igb3 is already being used by dl3, but I'm going to make this a VNIC, so who cares, right? Well, the ZFSSA does not KNOW you are going to make it a VNIC, now does it? So... it works as designed and REMOVES the igb3 device from the current dl3 datalink in the background. See how it's now missing? At the same time, the dl3 datalink choice is missing from my list of possible VNICs for me to choose from!!!! Hey!!! I wanted to pick dl3. Why isn't it on the list??? Well, it can't be on this list because dl3 no longer has a device associated with it. Bummer for you. When you click cancel, the device is still missing from dl3. The fix is easy. Just edit dl3 by clicking the pencil button, do absolutely nothing, and click "Apply". The device will magically come back. Now, make the VNIC datalink by clicking the "Plus Sign" button. Sure enough, once you check the VNIC box, dl3 is a valid choice. No problem. That's it for now. Have fun with VNICs.

Read the article

Data Guard - Snapshot Standby Database??

- by Jian Zhang-Oracle

?? -------- ?????,??standby?????mount??????????REDO??,??standby????????????????????,???????read-only???open????,????ACTIVE DATA GUARD,????standby?????????(read-only)??(????????),????standby???????????(read-write)? ?????,?????????????Real Application Testing(RAT)??????????,?????????standby??????snapshot standby?????????,??snapshot standby??????????,???????????(read-write)??????snapshot standby??????????????,?????????,??????????,????????,?????????snapshot standby?????standby???,????????? ?? --------- 1.??standby?????? SQL> Alter system set db_recovery_file_dest_size=500M; System altered. SQL> Alter system set db_recovery_file_dest='/u01/app/oracle/snapshot_standby'; System altered. 2.??standby?????? SQL> alter database recover managed standby database cancel; Database altered. 3.??standby???snapshot standby,??open snapshot standby SQL> alter database convert to snapshot standby; Database altered. SQL> alter database open; Database altered. ??snapshot standby??????SNAPSHOT STANDBY,open???READ WRITE: SQL> select DATABASE_ROLE,name,OPEN_MODE from v$database; DATABASE_ROLE NAME OPEN_MODE ---------------- --------- -------------------- SNAPSHOT STANDBY FSDB READ WRITE 4.?snapshot standby???????????Real Application Testing(RAT)????????? 5.?????,??snapshot standby???physical standby,?????????? SQL> shutdown immediate; Database closed. Database dismounted. ORACLE instance shut down. SQL> startup mount; ORACLE instance started. Database mounted. SQL> ALTER DATABASE CONVERT TO PHYSICAL STANDBY; Database altered. SQL> shutdown immediate; ORA-01507: database not mounted ORACLE instance shut down. SQL> startup mount; ORACLE instance started. Database mounted. SQL>ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION; Database altered. 5.?????standby?,???????PHYSICAL STANDBY,open???MOUNTED SQL> select DATABASE_ROLE,name,OPEN_MODE from v$database; DATABASE_ROLE NAME OPEN_MODE ---------------- --------- -------------------- PHYSICAL STANDBY FSDB MOUNTED 6.??????????????? ????: SQL> select ads.dest_id,max(sequence#) "Current Sequence", max(log_sequence) "Last Archived" from v$archived_log al, v$archive_dest ad, v$archive_dest_status ads where ad.dest_id=al.dest_id and al.dest_id=ads.dest_id and al.resetlogs_change#=(select max(resetlogs_change#) from v$archived_log ) group by ads.dest_id; DEST_ID Current Sequence Last Archived ---------- ---------------- ------------- 1 361 361 2 361 362 --???? SQL> select al.thrd "Thread", almax "Last Seq Received", lhmax "Last Seq Applied" from (select thread# thrd, max(sequence#) almax from v$archived_log where resetlogs_change#=(select resetlogs_change# from v$database) group by thread#) al, (select thread# thrd, max(sequence#) lhmax from v$log_history where resetlogs_change#=(select resetlogs_change# from v$database) group by thread#) lh where al.thrd = lh.thrd; Thread Last Seq Received Last Seq Applied ---------- ----------------- ---------------- 1 361 361 ??????????,???blog,???????????,??"??:Data Guard - Snapshot Standby Database??"

Read the article

Different Not Automatically Implies Better

- by Alois Kraus

Originally posted on: http://geekswithblogs.net/akraus1/archive/2013/11/05/154556.aspxRecently I was digging deeper why some WCF hosted workflow application did consume quite a lot of memory although it did basically only load a xaml workflow. The first tool of choice is Process Explorer or even better Process Hacker (has more options and the best feature copy&paste does work). The three most important numbers of a process with regards to memory are Working Set, Private Working Set and Private Bytes. Working set is the currently consumed physical memory (parts can be shared between processes e.g. loaded dlls which are read only) Private Working Set is the physical memory needed by this process which is not shareable Private Bytes is the number of non shareable which is only visible in the current process (e.g. all new, malloc, VirtualAlloc calls do create private bytes) When you have a bigger workflow it can consume under 64 bit easily 500MB for a 1-2 MB xaml file. This does not look very scalable. Under 64 bit the issue is excessive private bytes consumption and not the managed heap. The picture is quite different for 32 bit which looks a bit strange but it seems that the hosted VB compiler is a lot less memory hungry under 32 bit. I did try to repro the issue with a medium sized xaml file (400KB) which does contain 1000 variables and 1000 if which can be represented by C# code like this: string Var1; string Var2; ... string Var1000; if (!String.IsNullOrEmpty(Var1) ) { Console.WriteLine(“Var1”); } if (!String.IsNullOrEmpty(Var2) ) { Console.WriteLine(“Var2”); } .... Since WF is based on VB.NET expressions you are bound to the hosted VB.NET compiler which does result in (x64) 140 MB of private bytes which is ca. 140 KB for each if clause which is quite a lot if you think about the actually present functionality. But there is hope. .NET 4.5 does allow now C# expressions for WF which is a major step forward for all C# lovers. I did create some simple patcher to “cross compile” my xaml to C# expressions. Lets look at the result: C# Expressions VB Expressions x86 x86 On my home machine I have only 32 bit which gives you quite exactly half of the memory consumption under 64 bit. C# expressions are 10 times more memory hungry than VB.NET expressions! I wanted to do more with less memory but instead it did consume a magnitude more memory. That is surprising to say the least. The workflow does initialize in about the same time under x64 and x86 where the VB code does it in 2s whereas the C# version needs 18s. Also nearly ten times slower. That is a too high price to pay for any bigger sized xaml workflow to convert from VB.NET to C# expressions. If I do reduce the number of expressions to 500 then it does need 400MB which is about half of the memory. It seems that the cost per if does rise linear with the number of total expressions in a xaml workflow. Expression Language Cost per IF Startup Time C# 1000 Ifs x64 1,5 MB 18s C# 500 Ifs x64 750 KB 9s VB 1000 Ifs x64 140 KB 2s VB 500 Ifs x64 70 KB 1s Now we can directly compare two MS implementations. It is clear that the VB.NET compiler uses the same underlying structure but it has much higher offset compared to the highly inefficient C# expression compiler. I have filed a connect bug here with a harsher wording about recent advances in memory consumption. The funniest thing is that one MS employee did give an Azure AppFabric demo around early 2011 which was so slow that he needed to investigate with xperf. He was after startup time and the call stacks with regards to VB.NET expression compilation were remarkably similar. In fact I only found this post by googling for parts of my call stacks. … “C# expressions will be coming soon to WF, and that will have different performance characteristics than VB” … What did he know Jan 2011 what I did no know until today? ;-). He knew that C# expression will come but that they will not be automatically have better footprint. It is about time to fix that. In its current state C# expressions are not usable for bigger workflows. That also explains the headline for today. You can cheat startup time by prestarting workflows so that the demo looks nice and snappy but it does hurt scalability a lot since you do need much more memory than necessary. I did find the stacks by enabling virtual allocation tracking within XPerf which is still the best tool out there. But first you need to look at your process to check where the memory is hiding: For the C# Expression compiler you do not need xperf. You can directly dump the managed heap and check with a profiler of your choice. But if the allocations are happening on the Private Data ( VirtualAlloc ) you can find it with xperf. There is a nice video on channel 9 explaining VirtualAlloc tracking it in greater detail. If your data allocations are on the Heap it does mean that the C/C++ runtime did create a heap for you where all malloc, new calls do allocate from it. You can enable heap tracing with xperf and full call stack support as well which is doable via xperf like it is shown also on channel 9. Or you can use WPRUI directly: To make “Heap Usage” it work you need to set for your executable the tracing flags (before you start it). For example devenv.exe HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\devenv.exe DWORD TracingFlags 1 Do not forget to disable it after you did complete profiling the process or it will impact the startup time quite a lot. You can with xperf attach directly to a running process and collect heap allocation information from a gone wild process. Very handy if you need to find out what a process was doing which has arrived in a funny state. “VirtualAlloc usage” does work without explicitly enabling stuff for a specific process and is always on machine wide. I had issues on my Windows 7 machines with the call stack collection and the latest Windows 8.1 Performance Toolkit. I was told that WPA from Windows 8.0 should work fine but I do not want to downgrade.

Read the article

OpenGL loading functions error [on hold]

- by Ghilliedrone

I'm new to OpenGL, and I bought a book on it for beginners. I finished writing the sample code for making a context/window. I get an error on this line at the part PFNWGLCREATECONTEXTATTRIBSARBPROC, saying "Error: expected a ')'": typedef HGLRC(APIENTRYP PFNWGLCREATECONTEXTATTRIBSARBPROC)(HDC, HGLRC, const int*); Replacing it or adding a ")" makes it error, but the error disappears when I use the OpenGL headers included in the books CD, which are OpenGL 3.0. I would like a way to make this work with the newest gl.h/wglext.h and without libraries. Here's the rest of the class if it's needed: #include <ctime> #include <windows.h> #include <iostream> #include <gl\GL.h> #include <gl\wglext.h> #include "Example.h" #include "GLWindow.h" typedef HGLRC(APIENTRYP PFNWGLCREATECONTEXTATTRIBSARBPROC)(HDC, HGLRC, const int*); PFNWGLCREATECONTEXTATTRIBSARBPROC wglCreateContextAttribsARB = NULL; bool GLWindow::create(int width, int height, int bpp, bool fullscreen) { DWORD dwExStyle; //Window Extended Style DWORD dwStyle; //Window Style m_isFullscreen = fullscreen;//Store the fullscreen flag m_windowRect.left = 0L; m_windowRect.right = (long)width; m_windowRect.top = 0L; m_windowRect.bottom = (long)height;//Set bottom to height // fill out the window class structure m_windowClass.cbSize = sizeof(WNDCLASSEX); m_windowClass.style = CS_HREDRAW | CS_VREDRAW; m_windowClass.lpfnWndProc = GLWindow::StaticWndProc; //We set our static method as the event handler m_windowClass.cbClsExtra = 0; m_windowClass.cbWndExtra = 0; m_windowClass.hInstance = m_hinstance; m_windowClass.hIcon = LoadIcon(NULL, IDI_APPLICATION); // default icon m_windowClass.hCursor = LoadCursor(NULL, IDC_ARROW); // default arrow m_windowClass.hbrBackground = NULL; // don't need background m_windowClass.lpszMenuName = NULL; // no menu m_windowClass.lpszClassName = (LPCWSTR)"GLClass"; m_windowClass.hIconSm = LoadIcon(NULL, IDI_WINLOGO); // windows logo small icon if (!RegisterClassEx(&m_windowClass)) { MessageBox(NULL, (LPCWSTR)"Failed to register window class", NULL, MB_OK); return false; } if (m_isFullscreen)//If we are fullscreen, we need to change the display { DEVMODE dmScreenSettings; //Device mode memset(&dmScreenSettings, 0, sizeof(dmScreenSettings)); dmScreenSettings.dmSize = sizeof(dmScreenSettings); dmScreenSettings.dmPelsWidth = width; //Screen width dmScreenSettings.dmPelsHeight = height; //Screen height dmScreenSettings.dmBitsPerPel = bpp; //Bits per pixel dmScreenSettings.dmFields = DM_BITSPERPEL | DM_PELSWIDTH | DM_PELSHEIGHT; if (ChangeDisplaySettings(&dmScreenSettings, CDS_FULLSCREEN) != DISP_CHANGE_SUCCESSFUL) { MessageBox(NULL, (LPCWSTR)"Display mode failed", NULL, MB_OK); m_isFullscreen = false; } } if (m_isFullscreen) //Is it fullscreen? { dwExStyle = WS_EX_APPWINDOW; //Window Extended Style dwStyle = WS_POPUP; //Windows Style ShowCursor(false); //Hide mouse pointer } else { dwExStyle = WS_EX_APPWINDOW | WS_EX_WINDOWEDGE; //Window Exteneded Style dwStyle = WS_OVERLAPPEDWINDOW; //Windows Style } AdjustWindowRectEx(&m_windowRect, dwStyle, false, dwExStyle); //Adjust window to true requested size //Class registered, so now create window m_hwnd = CreateWindowEx(NULL, //Extended Style (LPCWSTR)"GLClass", //Class name (LPCWSTR)"Chapter 2", //App name dwStyle | WS_CLIPCHILDREN | WS_CLIPSIBLINGS, 0, 0, //x, y coordinates m_windowRect.right - m_windowRect.left, m_windowRect.bottom - m_windowRect.top, //Width and height NULL, //Handle to parent NULL, //Handle to menu m_hinstance, //Application instance this); //Pass a pointer to the GLWindow here //Check if window creation failed, hwnd would equal NULL if (!m_hwnd) { return 0; } m_hdc = GetDC(m_hwnd); ShowWindow(m_hwnd, SW_SHOW); UpdateWindow(m_hwnd); m_lastTime = GetTickCount() / 1000.0f; return true; } LRESULT CALLBACK GLWindow::StaticWndProc(HWND hWnd, UINT uMsg, WPARAM wParam, LPARAM lParam) { GLWindow* window = nullptr; //If this is the create message if (uMsg == WM_CREATE) { //Get the pointer we stored during create window = (GLWindow*)((LPCREATESTRUCT)lParam)->lpCreateParams; //Associate the window pointer with the hwnd for the other events to access SetWindowLongPtr(hWnd, GWL_USERDATA, (LONG_PTR)window); } else { //If this is not a creation event, then we should have stored a pointer to the window window = (GLWindow*)GetWindowLongPtr(hWnd, GWL_USERDATA); if (!window) { //Do the default event handling return DefWindowProc(hWnd, uMsg, wParam, lParam); } } //Call our window's member WndProc(allows us to access member variables) return window->WndProc(hWnd, uMsg, wParam, lParam); } LRESULT GLWindow::WndProc(HWND hWnd, UINT uMsg, WPARAM wParam, LPARAM lParam) { switch (uMsg) { case WM_CREATE: { m_hdc = GetDC(hWnd); setupPixelFormat(); //Set the version that we want, in this case 3.0 int attribs[] = { WGL_CONTEXT_MAJOR_VERSION_ARB, 3, WGL_CONTEXT_MINOR_VERSION_ARB, 0, 0}; //Create temporary context so we can get a pointer to the function HGLRC tmpContext = wglCreateContext(m_hdc); //Make the context current wglMakeCurrent(m_hdc, tmpContext); //Get the function pointer wglCreateContextAttribsARB = (PFNWGLCREATECONTEXTATTRIBSARBPROC)wglGetProcAddress("wglCreateContextAttribsARB"); //If this is NULL then OpenGl 3.0 is not supported if (!wglCreateContextAttribsARB) { MessageBox(NULL, (LPCWSTR)"OpenGL 3.0 is not supported", (LPCWSTR)"An error occured", MB_ICONERROR | MB_OK); DestroyWindow(hWnd); return 0; } //Create an OpenGL 3.0 context using the new function m_hglrc = wglCreateContextAttribsARB(m_hdc, 0, attribs); //Delete the temporary context wglDeleteContext(tmpContext); //Make the GL3 context current wglMakeCurrent(m_hdc, m_hglrc); m_isRunning = true; } break; case WM_DESTROY: //Window destroy case WM_CLOSE: //Windows is closing wglMakeCurrent(m_hdc, NULL); wglDeleteContext(m_hglrc); m_isRunning = false; //Stop the main loop PostQuitMessage(0); break; case WM_SIZE: { int height = HIWORD(lParam); //Get height and width int width = LOWORD(lParam); getAttachedExample()->onResize(width, height); //Call the example's resize method } break; case WM_KEYDOWN: if (wParam == VK_ESCAPE) //If the escape key was pressed { DestroyWindow(m_hwnd); } break; default: break; } return DefWindowProc(hWnd, uMsg, wParam, lParam); } void GLWindow::processEvents() { MSG msg; //While there are messages in the queue, store them in msg while (PeekMessage(&msg, NULL, 0, 0, PM_REMOVE)) { //Process the messages TranslateMessage(&msg); DispatchMessage(&msg); } } Here is the header: #pragma once #include <ctime> #include <windows.h> class Example;//Declare our example class class GLWindow { public: GLWindow(HINSTANCE hInstance); //default constructor bool create(int width, int height, int bpp, bool fullscreen); void destroy(); void processEvents(); void attachExample(Example* example); bool isRunning(); //Is the window running? void swapBuffers() { SwapBuffers(m_hdc); } static LRESULT CALLBACK StaticWndProc(HWND wnd, UINT msg, WPARAM wParam, LPARAM lParam); LRESULT CALLBACK WndProc(HWND wnd, UINT msg, WPARAM wParam, LPARAM lParam); float getElapsedSeconds(); private: Example* m_example; //A link to the example program bool m_isRunning; //Is the window still running? bool m_isFullscreen; HWND m_hwnd; //Window handle HGLRC m_hglrc; //Rendering context HDC m_hdc; //Device context RECT m_windowRect; //Window bounds HINSTANCE m_hinstance; //Application instance WNDCLASSEX m_windowClass; void setupPixelFormat(void); Example* getAttachedExample() { return m_example; } float m_lastTime; };

Read the article

SSIS - Range lookups

- by Repieter

When developing an ETL solution in SSIS we sometimes need to do range lookups in SSIS. Several solutions for this can be found on the internet, but now we have built another solution which I would like to share, since it's pretty easy to implement and the performance is fast. You can download the sample package to see how it works. Make sure you have the AdventureWorks2008R2 and AdventureWorksDW2008R2 databases installed. (Apologies for the layout of this blog, I don't do this too often :)) To give a little bit more information about the example, this is basically what is does: we load a facttable and do an SCD type 2 lookup operation of the Product dimension. This is done with a script component. First we query the Data warehouse to create the lookup dataset. The query that is used for that is: SELECT [ProductKey] ,[ProductAlternateKey] ,[StartDate] ,ISNULL([EndDate], '9999-01-01') AS EndDate FROM [DimProduct] The output of this query is stored in a DataTable: string lookupQuery = @" SELECT [ProductKey] ,[ProductAlternateKey] ,[StartDate] ,ISNULL([EndDate], '9999-01-01') AS EndDate FROM [DimProduct]"; OleDbCommand oleDbCommand = new OleDbCommand(lookupQuery, _oleDbConnection); OleDbDataAdapter adapter = new OleDbDataAdapter(oleDbCommand); _dataTable = new DataTable(); adapter.Fill(_dataTable); Now that the dimension data is stored in the DataTable we use the following method to do the actual lookup: public int RangeLookup(string businessKey, DateTime lookupDate) { // set default return value (Unknown) int result = -1; DataRow[] filteredRows; filteredRows = _dataTable.Select(string.Format("ProductAlternateKey = '{0}'", businessKey)); for (int i = 0; i < filteredRows.Length; i++) { // check if the lookupdate is found between the startdate and enddate of any of the records if (lookupDate >= (DateTime)filteredRows[i][2] && lookupDate < (DateTime)filteredRows[i][3]) { result = (filteredRows[i][0] == null) ? -1 : (int)filteredRows[i][0]; break; } } filteredRows = null; return result; } This method is executed for every row that passes the script component. This is implemented in the ProcessInputRow method public override void Input0_ProcessInputRow(Input0Buffer Row) { // Perform the lookup operation on the current row and put the value in the Surrogate Key Attribute Row.ProductKey = RangeLookup(Row.ProductNumber, Row.OrderDate); } Now what actually happens?! 1. Every record passes the business key and the orderdate to the RangeLookup method. 2. The DataTable is then filtered on the business key of the current record. The output is stored in a DataRow [] object. 3. We loop over the DataRow[] object to see where the orderdate meets the following expression: (lookupDate >= (DateTime)filteredRows[i][2] && lookupDate < (DateTime)filteredRows[i][3]) 4. When the expression returns true (so where the data is between the Startdate and the EndDate), the surrogate key of the dimension record is returned We have done some testing with this solution and it works great for us. Hope others can use this example to do their range lookups.

Read the article

Who could ask for more with LESS CSS? (Part 2 of 3–Setup)

- by ToStringTheory

Welcome to part two in my series covering the LESS CSS language. In the first post, I covered the two major CSS precompiled languages - LESS and SASS to a small extent, iterating over some of the features that you could expect to find in them. In this post, I will go a little further in depth into the setup and execution of using the LESS framework. Introduction It really doesn’t take too much to get LESS working in your project. The basic workflow will be including the necessary translator in your project, defining bundles for the LESS files, add the necessary code to your layouts.cshtml file, and finally add in all your necessary styles to the LESS files! Lets get started… New Project Just like all great experiments in Visual Studio, start up a File > New Project, and create a new MVC 4 Web Application. The Base Package After you have the new project spun up, use the Nuget Package Manager to install the Bundle Transformer: LESS package. This will take care of installing the main translator that we will be using for LESS code (dotless which is another Nuget package), as well as the core framework for the Bundle Transformer library. The installation will come up with some instructions in a readme file on how to modify your web.config to handle all your *.less requests through the Bundle Transformer, which passes the translating onto dotless. Where To Put These LESS Files?! This step isn’t really a requirement, however I find that I don’t like how ASP.Net MVC just has a content directory where they store CSS, content images, css images…. In my project, I went ahead and created a new directory just for styles – LESS files, CSS files, and images that are only referenced in LESS or CSS. Ignore the MVC directory as this was my testbed for another project I was working on at the same time. As you can see here, I have: A top level directory for images which contains only images used in a page A top level directory for scripts A top level directory for Styles A few directories for plugins I am using (Colrizr, JQueryUI, Farbtastic) Multiple *.less files for different functions (I’ll go over these in a minute) I find that this layout offers the best separation of content types. Bring Out Your Bundles! The next thing that we need to do is add in the necessary code for the bundling of these LESS files. Go ahead and open your BundleConfig.cs file, usually located in the /App_Start/ folder of the project. As you will see in a minute, instead of using the method Microsoft does in the base MVC 4 project, I change things up a bit. Define Constants The first thing I do is define constants for each of the virtual paths that will be used in the bundler: The main reason is that I hate magic strings in my program, so the fact that you first defined a virtual path in the BundleConfig file, and then used that path in the _Layout.cshtml file really irked me. Add Bundles to the BundleCollection Next, I am going to define the bundles for my styles in my AddStyleBundles method: That is all it takes to get all of my styles in play with LESS. The CssTransformer and NullOrderer types come from the Bundle Transformer we grabbed earlier. If we didn’t use that package, we would have to write our own function (not too hard, but why do it if it’s been done). I use the site.less file as my main hub for LESS - I will cover that more in the next section. Add Bundles To Layout.cshtml File With the constants in the BundleConfig file, instead of having to use the same magic string I defined for the bundle virtual path, I am able to do this: Notice here that besides the RenderSection magic strings (something I am working on in another side project), all of the bundles are now based on const strings. If I need to change the virtual path, I only have to do it in one place. Nifty! Get Started! We are now ready to roll! As I said in the previous section, I use the site.less file as a central hub for my styles: As seen here, I have a reset.css file which is a simple CSS reset. Next, I have created a file for managing all my color variables – colors.less: Here, you can see some of the standards I started to use, in this case for color variables. I define all color variables with the @col prefix. Currently, I am going for verbose variable names. The next file imported is my font.less file that defines the typeface information for the site: Simple enough. A couple of imports for fonts from Google, and then declaring variables for use throughout LESS. I also set up the heading sizes, margins, etc.. You can also see my current standardization for font declaration strings – @font. Next, I pull in a mixins.less file that I grabbed from the Twitter Bootstrap library that gives some useful parameterized mixins for use such as border-radius, gradient, box-shadow, etc… The common.less file is a file that just contains items that I will be defining that can be used across all my LESS files. Kind of like my own mixins or font-helpers: Finally I have my layout.less file that contains all of my definitions for general site layout – width, main/sidebar widths, footer layout, etc: That’s it! For the rest of my one off definitions/corrections, I am currently putting them into the site.less file beneath my original imports Note Probably my favorite side effect of using the LESS handler/translator while bundling is that it also does a CSS checkup when rendering… See, when your web.config is set to debug, bundling will output the url to the direct less file, not the bundle, and the http handler intercepts the call, compiles the less, and returns the result. If there is an error in your LESS code, the CSS file can be returned empty, or may have the error output as a comment on the first couple lines. If you have the web.config set to not debug, then if there is an error in your code, you will end up with the usual ASP.Net exception page (unless you catch the exception of course), with information regarding the failure of the conversion, such as brace mismatch, undefined variable, etc… I find it nifty. Conclusion This is really just the beginning. LESS is very powerful and exciting! My next post will show an actual working example of why LESS is so powerful with its functions and variables… At least I hope it will! As for now, if you have any questions, comments, or suggestions on my current practice, I would love to hear them! Feel free to drop a comment or shoot me an email using the contact page. In the mean time, I plan on posting the final post in this series tomorrow or the day after, with my side project, as well as a whole base ASP.Net MVC4 templated project with LESS added in it so that you can check out the layout I have in this post. Until next time…

Read the article

Looking for home networking hardware and software advice

- by phobos7

Note: I originally wrote this up in a blog post. I've removed any affiliate links that I put in my original post to ensure I don't annoy anybody. I've recently moved home and I now need to go to the trouble of sorting out my home network yet again. We had Virgin broadband in Hertford but you can't get Virgin in the street we've moved to so I've had to go with O2 Broadband. Normally I prefer to use my own hardward, and previously used the DLink DIR-655 router which was great, but in this situation I am using the O2 Wirelss Box III since I only have an old Netgear DG834PN Wireless G modem router and I'd rather be using Wireless N. Anyway, the place we have moved into has only one phone point in the hallway, has the best TV point in one room and the best place to put the TV and other entertainment stuff in yet another room. So, networking the house up for Internet and TV is required. The diagram below shows the things that I'll have in my home network but there are three points where I'm not quite sure what hardware to us. Wireless Access Point/Bridge, that acts only as a wireless to wire bridge and not an AP, that links up a Media Centre/PC and a couple of consoles to the network. I'm pretty much settled on us an Acer Aspire Revo R3600 as my media PC, probably with Ubuntu or Windows and XBMC installed. Wireless Access Point/Bridge, that acts only as a wireless to wire bridge and not an AP, that links up a device that can decode and stream TV from a TV aerial across the network. The device that is connected to 2). At the moment I'm considering a HDHomeRun by SiliconDust. At the moment I'm considering either the TP LINK TL-WA701ND 150Mbps Wireless Lite N Access Point (very cheap at Amazon) or the Netgear 5 GHz Wireless-N HD Access Point/Bridge. I'd love to get some insight into what you would do in my situation. What Wireless Access Point/Bridge should I put at points 1) and 2)? What device should I choose for point 3) that can decode and stream a TV signal? Is the Acer Aspire Revo R3600 a good choice? ![alt text][6] Note 2: I've also posted this question on AVForums.

Read the article

Can't install Perl DBD module on Ubuntu (for Bugzilla)

- by Mara

Trying to install bugzilla-4.2.2 on Ubuntu 12.04. When I run checksetup.pl I get the following error: YOU MUST RUN ONE OF THE FOLLOWING COMMANDS (depending on which database you use): PostgreSQL: /usr/bin/perl install-module.pl DBD::Pg MySQL: /usr/bin/perl install-module.pl DBD::mysql SQLite: /usr/bin/perl install-module.pl DBD::SQLite Oracle: /usr/bin/perl install-module.pl DBD::Oracle To attempt an automatic install of every required and optional module with one command, do: /usr/bin/perl install-module.pl --all I have installed MySQL via XAMPP so I run: /urs/bin/perl install-module.pl DBD::mysql And get the following error: perl Makefile.PL --testuser=username Can't exec "mysql_config": No such file or directory at Makefile.PL line 479. Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located Can't exec "mysql_config": No such file or directory at Makefile.PL line 479. Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located Can't exec "mysql_config": No such file or directory at Makefile.PL line 479. Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located Failed to determine directory of mysql.h. Use perl Makefile.PL --cflags=-I<dir> to set this directory. For details see the INSTALL.html file, section "C Compiler flags" or type perl Makefile.PL --help Warning: No success on command[/usr/bin/perl Makefile.PL LIB="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib" INSTALLMAN1DIR="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/man/man1" INSTALLMAN3DIR="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/man/man3" INSTALLBIN="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/bin" INSTALLSCRIPT="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/bin" INSTALLDIRS=perl] CAPTTOFU/DBD-mysql-4.021.tar.gz /usr/bin/perl Makefile.PL LIB="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib" INSTALLMAN1DIR="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/man/man1" INSTALLMAN3DIR="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/man/man3" INSTALLBIN="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/bin" INSTALLSCRIPT="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/bin" INSTALLDIRS=perl -- NOT OK Skipping test because of notest pragma Running make install Make had some problems, won't install Could not read metadata file. Falling back to other methods to determine prerequisites So then I tried checksetup.pl's suggestion and ran: /usr/bin/perl install-module.pl --all And it seems to have installed DBD::SQLite without any problems, but again I see a warning that says it's skipping tests because of notest pragma. When I re-run checksetup.pl It shows 3 of the 4 original DB drivers in the "not found" list: PostgreSQL: /usr/bin/perl install-module.pl DBD::Pg MySQL: /usr/bin/perl install-module.pl DBD::mysql Oracle: /usr/bin/perl install-module.pl DBD::Oracle So running it with --all seems to have installed the SQLite driver without any problems, but for some reason I can't seem to install the MySQL driver. Again I need MySQL because thats what XAMPP uses and because I prefer MySQL regardless. I have a feeling it has something to do with this notest pragma error. Any ideas? Thanks in advance!

Read the article

LSI 9285-8e and Supermicro SC837E26-RJBOD1 duplicate enclosure ID and slot numbers

- by Andy Shinn

I am working with 2 x Supermicro SC837E26-RJBOD1 chassis connected to a single LSI 9285-8e card in a Supermicro 1U host. There are 28 drives in each chassis for a total of 56 drives in 28 RAID1 mirrors. The problem I am running in to is that there are duplicate slots for the 2 chassis (the slots list twice and only go from 0 to 27). All the drives also show the same enclosure ID (ID 36). However, MegaCLI -encinfo lists the 2 enclosures correctly (ID 36 and ID 65). My question is, why would this happen? Is there an option I am missing to use 2 enclosures effectively? This is blocking me rebuilding a drive that failed in slot 11 since I can only specify enclosure and slot as parameters to replace a drive. When I do this, it picks the wrong slot 11 (device ID 46 instead of device ID 19). Adapter #1 is the LSI 9285-8e, adapter #0 (which I removed due to space limitations) is the onboard LSI. Adapter information: Adapter #1 ============================================================================== Versions ================ Product Name : LSI MegaRAID SAS 9285-8e Serial No : SV12704804 FW Package Build: 23.1.1-0004 Mfg. Data ================ Mfg. Date : 06/30/11 Rework Date : 00/00/00 Revision No : 00A Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 5.25.00_4.11.05.00_0x05040000 WebBIOS Version : 6.1-20-e_20-Rel Preboot CLI Version: 05.01-04:#%00001 FW Version : 3.140.15-1320 NVDATA Version : 2.1106.03-0051 Boot Block Version : 2.04.00.00-0001 BOOT Version : 06.253.57.219 Pending Images in Flash ================ None PCI Info ================ Vendor Id : 1000 Device Id : 005b SubVendorId : 1000 SubDeviceId : 9285 Host Interface : PCIE ChipRevision : B0 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 5003048000ee8e7f 1 5003048000ee8a7f 2 0000000000000000 3 0000000000000000 4 0000000000000000 5 0000000000000000 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 500605b0038f9210 BBU : Present Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Absent ROC temperature : 70 degree Celcius Settings ================ Current Time : 18:24:36 3/13, 2012 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : Disabled Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Enabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 10 Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 887 MB Device Present ================ Virtual Drives : 28 Degraded : 0 Offline : 0 Physical Devices : 59 Disks : 56 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : No Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : Yes Support PI : No Support Boot Time PFK Change : Yes Disable Online PFK Change : No PFK TrailTime Remaining : 0 days 0 hours Support Shield State : Yes Block SSD Write Disk Cache Change: Yes Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : No Support Breakmirror : No Power Savings : Yes Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : Yes Disable Spin Down of hot spares : No Spin Down time : 30 T10 Power State : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : None ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : No Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : Yes Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : No Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : Don't Auto spin down Configured Drives Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Default spin down time in minutes: 30 Enable JBOD : No TTY Log In Flash : No Auto Enhanced Import : No BreakMirror RAID Support : No Disable Join Mirror : No Enable Shield State : Yes Time taken to detect CME : 60s Exit Code: 0x00 Enclosure information: # /opt/MegaRAID/MegaCli/MegaCli64 -encinfo -a1 Number of enclosures on adapter 1 -- 3 Enclosure 0: Device ID : 36 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port B Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 65 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11820 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 48 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 1: Device ID : 65 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port A Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 36 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11760 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 47 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 2: Device ID : 252 Number of Slots : 8 Number of Power Supplies : 0 Number of Fans : 0 Number of Temperature Sensors : 0 Number of Alarms : 0 Number of SIM Modules : 1 Number of Physical Drives : 0 Status : Normal Position : 1 Connector Name : Unavailable Enclosure type : SGPIO Failed in first Inquiry commnad FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : Unavailable Inquiry data : Vendor Identification : LSI Product Identification : SGPIO Product Revision Level : N/A Vendor Specific : Exit Code: 0x00 Now, notice that each slot 11 device shows an enclosure ID of 36, I think this is where the discrepancy happens. One should be 36. But the other should be on enclosure 65. Drives in slot 11: Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 5, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 48 WWN: Sequence Number: 11 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : YES Device Firmware Level: A5C0 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8a53 Connected Port Number: 1(path0) Inquiry Data: MJ1311YNG6YYXAHitachi HDS5C3030ALA630 MEAOA5C0 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 19, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 19 WWN: Sequence Number: 4 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : NO Device Firmware Level: A580 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8e53 Connected Port Number: 0(path0) Inquiry Data: MJ1313YNG1VA5CHitachi HDS5C3030ALA630 MEAOA580 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Update 06/28/12: I finally have some new information about (what we think) the root cause of this problem so I thought I would share. After getting in contact with a very knowledgeable Supermicro tech, they provided us with a tool called Xflash (doesn't appear to be readily available on their FTP). When we gathered some information using this utility, my colleague found something very strange: root@mogile2 test]# ./xflash.dat -i get avail Initializing Interface. Expander: SAS2X36 (SAS2x36) 1) SAS2X36 (SAS2x36) (50030480:00EE917F) (0.0.0.0) 2) SAS2X36 (SAS2x36) (50030480:00E9D67F) (0.0.0.0) 3) SAS2X36 (SAS2x36) (50030480:0112D97F) (0.0.0.0) This lists the connected enclosures. You see the 3 connected (we have since added a 3rd and a 4th which is not yet showing up) with their respective SAS address / WWN (50030480:00EE917F). Now we can use this address to get information on the individual enclosures: [root@mogile2 test]# ./xflash.dat -i 5003048000EE917F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00EE917F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 5003048000E9D67F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00E9D67F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 500304800112D97F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:0112D97F Enclosure Logical Id: 50030480:0112D97F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 Did you catch it? The first 2 enclosures logical ID is partially masked out where the 3rd one (which has a correct unique enclosure ID) is not. We pointed this out to Supermicro and were able to confirm that this address is supposed to be set during manufacturing and there was a problem with a certain batch of these enclosures where the logical ID was not set. We believe that the RAID controller is determining the ID based on the logical ID and since our first 2 enclosures have the same logical ID, they get the same enclosure ID. We also confirmed that 0000007F is the default which comes from LSI as an ID. The next pointer that helps confirm this could be a manufacturing problem with a run of JBODs is the fact that all 6 of the enclosures that have this problem begin with 00E. I believe that between 00E8 and 00EE Supermicro forgot to program the logical IDs correctly and neglected to recall or fix the problem post production. Fortunately for us, there is a tool to manage the WWN and logical ID of the devices from Supermicro: ftp://ftp.supermicro.com/utility/ExpanderXtools_Lite/. Our next step is to schedule a shutdown of these JBODs (after data migration) and reprogram the logical ID and see if it solves the problem. Update 06/28/12 #2: I just discovered this FAQ at Supermicro while Google searching for "lsi 0000007f": http://www.supermicro.com/support/faqs/faq.cfm?faq=11805. I still don't understand why, in the last several times we contacted Supermicro, they would have never directed us to this article :\

Read the article

Apache Solr Admin on Tomcat Deployed in WebApps Directory

- by KM01

I am trying to get Apache Solr to work on Redhat6 and Tomcat6 (using these instructions), but get this error when browsing to the admin section, http://localhost:8080/solr-example/admin: HTTP Status 404 - missing core name in path type Status report message missing core name in path description The requested resource (missing core name in path) is not available. http://localhost:8080/solr-example loads fine, with a link to "Solr Admin." My setup is as follows: tomcat6: /etc/tomcat6 Solr: /app/solr/example I have a solr-example.xml in /etc/tomcat6/Catalina/localhost/, which reads: <?xml version="1.0" encoding="utf-8"?> <Context docBase="/app/solr/example/apache-solr-3.4.0.war" debug="0" crossContext="true"> <Environment name="solr/home" type="java.lang.String" value="/app/solr/example" override="true"/> </Context> I don't see anything in the logs (/var/log/tomcat6) ... only entires in catalina.out are regarding the starting and stopping of tomcat6. My questions are: 1.What else do I need to do to get "Solr Admin" to work under Tomcat? 2.Where are these "cores" supposed to be specified? I see an entry in /app/solr/example/solr/solr.xml ? <solr persistent="false"> adminPath: RequestHandler path to manage cores. If 'null' (or absent), cores will not be manageable via request handler <cores adminPath="/admin/cores" defaultCoreName="collection1"> <core name="collection1" instanceDir="." /> </cores> </solr> 3.How do I got about ensuring that logs are working correctly? I can't find logs that contain mention of the 404 above. Update in response to @quanta's comment: Downloaded former (apache-solr-3.4.0.tgz) dataDir was not set, now set to: <dataDir>${solr.data.dir:../solr/data}</dataDir> JAVA_OPTS: /usr/lib/jvm/java/bin/java -classpath :/usr/share/tomcat6/bin/bootstrap.jar:/usr/share/tomcat6/bin/tomcat-juli.jar:/usr/share/java/commons-daemon.jar -Dcatalina.base=/usr/share/tomcat6 -Dcatalina.home=/usr/share/tomcat6 -Djava.endorsed.dirs= -Djava.io.tmpdir=/var/cache/tomcat6/temp -Djava.util.logging.config.file=/usr/share/tomcat6/conf/logging.properties -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager org.apache.catalina.startup.Bootstrap start catalina.out contains no indication of the above error

Read the article

problem with revalidating a jframe.

- by John Quesie

I have this code which should take the radio button input do a little math and display a popup. which it does fine. but then it is supposed to re validate and ask the next question. when i get to the second question, the answer always comes out as the isSelected(true) value no matter which radio button you click on. SO to be clear the first time through it works fin but when the second question comes up, it just takes the default radio button every time. public class EventHandler implements ActionListener { private Main gui; public EventHandler(Main gui){ this.gui = gui; } public void actionPerformed(ActionEvent e){ String answer = ""; double val = 1; //get current answer set String [] anArr = gui.getAnswers(gui.currentStage, gui.currentQuestion); if(e.getSource() == gui.exit){ System.exit(0); } if(e.getSource() == gui.submit){ if(gui.a1.isSelected()){ answer = anArr[0]; val = gui.getScore(1); } if(gui.a2.isSelected()){ answer = anArr[1]; val = gui.getScore(2); } if(gui.a3.isSelected()){ answer = anArr[2]; val = gui.getScore(3); } if(gui.a4.isSelected()){ answer = anArr[3];; val = gui.getScore(4); } JOptionPane.showMessageDialog(null, popupMessage(answer, val), "Your Answer", 1); //compute answer here //figure out what next question is to send gui.moveOn(); gui.setQA(gui.currentStage, gui.currentQuestion); //resets gui gui.goWest(); gui.q.revalidate(); } } public String popupMessage(String ans, double val){ //displays popup after an answer has been choosen gui.computeScore(val); String text = " You Answered " + ans + " Your score is now " + gui.yourScore ; return text; } } public class Main extends JFrame { public JLabel question; public JButton exit; public JButton submit; public JRadioButton a1; public JRadioButton a2; public JRadioButton a3; public JRadioButton a4; public ButtonGroup bg; public double yourScore = 1; public int currentQuestion = 1; public String currentStage = "startup"; JPanel q; public Main(){ setTitle("Ehtics Builder"); setLocation(400,400); setLayout(new BorderLayout(5,5)); setQA("startup", 1); goNorth(); goEast(); goWest(); goSouth(); goCenter(); pack(); setVisible(true); setDefaultCloseOperation(EXIT_ON_CLOSE); } public void goNorth(){ } public void goWest(){ q = new JPanel(); q.setLayout(new GridLayout(0,1)); q.add(question); bg.add(a1); bg.add(a2); bg.add(a3); bg.add(a4); a1.setSelected(true); q.add(a1); q.add(a2); q.add(a3); q.add(a4); add(q, BorderLayout.WEST); System.out.println(); } public void goEast(){ } public void goSouth(){ JPanel p = new JPanel(); p.setLayout(new FlowLayout(FlowLayout.CENTER)); exit = new JButton("Exit"); submit = new JButton("Submit"); p.add(exit); p.add(submit); add(p, BorderLayout.SOUTH); EventHandler myEventHandler = new EventHandler(this); exit.addActionListener(myEventHandler); submit.addActionListener(myEventHandler); } public void goCenter(){ } public static void main(String[] args) { Main open = new Main(); } public String getQuestion(String type, int num){ //reads the questions from a file String question = ""; String filename = ""; String [] ques; num = num - 1; if(type.equals("startup")){ filename = "startup.txt"; }else if(type.equals("small")){ filename = "small.txt"; }else if(type.equals("mid")){ filename = "mid.txt"; }else if(type.equals("large")){ filename = "large.txt"; }else{ question = "error"; return question; } ques = readFile(filename); for(int i = 0;i < ques.length;i++){ if(i == num){ question = ques[i]; } } return question; } public String [] getAnswers(String type, int num){ //reads the answers from a file String filename = ""; String temp = ""; String [] group; String [] ans; num = num - 1; if(type.equals("startup")){ filename = "startupA.txt"; }else if(type.equals("small")){ filename = "smallA.txt"; }else if(type.equals("mid")){ filename = "midA.txt"; }else if(type.equals("large")){ filename = "largeA.txt"; }else{ System.out.println("Error"); } group = readFile(filename); for(int i = 0;i < group.length;i++){ if(i == num){ temp = group[i]; } } ans = temp.split("-"); return ans; } public String [] getValues(String type, int num){ //reads the answers from a file String filename = ""; String temp = ""; String [] group; String [] vals; num = num - 1; if(type.equals("startup")){ filename = "startupV.txt"; }else if(type.equals("small")){ filename = "smallV.txt"; }else if(type.equals("mid")){ filename = "midV.txt"; }else if(type.equals("large")){ filename = "largeV.txt"; }else{ System.out.println("Error"); } group = readFile(filename); for(int i = 0;i < group.length;i++){ if(i == num){ temp = group[i]; } } vals = temp.split("-"); return vals; } public String [] readFile(String filename){ //reads the contentes of a file, for getQuestions and getAnswers String text = ""; int i = -1; FileReader in = null; File f = new File(filename); try{ in = new FileReader(f); }catch(FileNotFoundException e){ System.out.println("file does not exist"); } try{ while((i = in.read()) != -1) text += ((char)i); }catch(IOException e){ System.out.println("Error reading file"); } try{ in.close(); }catch(IOException e){ System.out.println("Error reading file"); } String [] questions = text.split(":"); return questions; } public void computeScore(double val){ //calculates you score times the value of your answer yourScore = val * yourScore; } public double getScore(int aNum){ //gets the score of an answer, stage and q number is already set in the class aNum = aNum - 1; double val = 0; double [] valArr = new double[4]; for(int i = 0;i < getValues(currentStage, currentQuestion).length;i++){ val = Double.parseDouble(getValues(currentStage, currentQuestion)[i]); valArr[i] = val; } if(aNum == 0){ val = valArr[0]; } if(aNum == 1){ val = valArr[1]; } if(aNum == 2){ val = valArr[2]; } if(aNum == 3){ val = valArr[3]; } // use current stage and questiion and trhe aNum to get the value for that answer return val; } public void nextQuestion(int num){ //sets next question to use currentQuestion = num; } public void nextStage(String sta){ // sets next stage to use currentStage = sta; } public void moveOn(){ // uses the score and current question and stage to determine wher to go next and what stage to use next nextQuestion(2); nextStage("startup"); } public void setQA(String level, int num){ String [] arr = getAnswers(level, num); question = new JLabel(getQuestion(level, num)); bg = new ButtonGroup(); a1 = new JRadioButton(arr[0]); a2 = new JRadioButton(arr[1]); a3 = new JRadioButton(arr[2]); a4 = new JRadioButton(arr[3]); } }

Read the article

Double MySQL Running on Mountain Lion

- by Norris

After I've done a full restart, my Apache PHP server doesn't connect to Local MySQL ( connecting via 127.0.0.1 because localhost for some reason fails always ). So I did this today: ? ~ mysqladmin shutdown -u root -p Enter password: ? ~ mysqladmin shutdown -u root -p Enter password: mysqladmin: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)' Check that mysqld is running and that the socket: '/tmp/mysql.sock' exists! Which basically means that I succeeded in shutting down mysql. But as soon as I did - Apache PHP successfully connect to MySQL and my local sites work without a hiccup until the next restart. Here are a few other details: (as you can tell - I've installed MySQL via brew) ? ~ sudo ps aux | grep mysql N 4774 0.0 0.0 2432768 620 s000 S+ 9:53AM 0:00.00 grep mysql N 4772 0.0 2.6 3030168 440688 ?? S 9:51AM 0:00.29 /usr/local/Cellar/mysql/5.6.13/bin/mysqld --basedir=/usr/local/Cellar/mysql/5.6.13 --datadir=/usr/local/var/mysql --plugin-dir=/usr/local/Cellar/mysql/5.6.13/lib/plugin --bind-address=127.0.0.1 --log-error=/usr/local/var/mysql/N.local.err --pid-file=/usr/local/var/mysql/N.local.pid N 4686 0.0 0.0 2433432 1000 ?? S 9:51AM 0:00.01 /bin/sh /usr/local/opt/mysql/bin/mysqld_safe --bind-address=127.0.0.1 N 4362 0.0 2.7 3120276 458728 ?? S 9:47AM 0:00.45 mysqld ? ~ lsof -i | grep mysql mysqld 4362 N 16u IPv6 0x76959e40691f9f93 0t0 TCP *:mysql (LISTEN) This is the weird thing: ? ~ killall -9 mysqld MySQL Is dead! Apache doesn't connect. Then, when I run: ? ~ sudo mysqladmin shutdown -u root -p Enter password: Apache is (again) able to successfully connect to MySQL. As far as I understand this means that I have two mysql servers setup and both of them are trying to start up at the same time, but I don't have the slightest idea on how to fix it. I've tried brew reinstalling but that didn't help. ? ~ which mysqladmin /usr/local/bin/mysqladmin ? ~ whence -p mysql /usr/local/bin/mysql

Read the article

OpenVPN, Great on Windows, VERY slow on Mac...

- by Phsion

Hello, I'm not really an IT Pro, but this seemed like the best place to ask this question... I have setup VPN networks in the past, for fun, and everything was great, but now I've set one up for my boss, and while my computers all work great, his Mac machines are almost too slow to work with. Its pretty much vanilla configs all around, anyone have any ideas? Its a TUN routing setup over UDP. Back Story: My boss travels a lot, and wants to be able to access all his files from the road, and is also pretty paranoid about security (even though knows almost nothing about computers). SO i figured a VPN would be the answer. I went with OpenVPN, but there are some other issues. The only ISP we can get in our area besides Dial-UP is a crappy Satellite provider, that doesn't offer public IPs unless your willing to pay, so while the computers and VPN setup are pretty vanilla, the routing and structure is strange to get around this limitation. Specs: Its OpenVPN2, and there are six machines using it (only three actually use it, the rest are my test machines), one Windows 7 laptop, two XP Desktops, one OS X 10.5 Desktop, one 10.6 Desktop, and one 10.6 Laptop. One XP Desktop sits at my house and acts as the server (6Mbs/2Mbs FIOS connection). One XP desktop sits at the office and hosts a webpage that will wake up the Main Mac Desktop from sleep, and also ping all the machines on the VPN and show their status. The main office mac (10.6) stays in sleep mode until it gets the Wake-On-Lan packet from the Office XP, and then it auto connects to the VPN and opens itself up. The reason for all this is the Satellite private IP crap means i cant directly access the office machines outside of the LAN, so everyone connects to my house first, then they talk to each other from there. The Wake On Lan weirdness is because my boss doesn't want to leave the main Mac on all the time, and making a quick and dirty webpage was the easiest way to send a Magic Packet from inside the LAN without confusing my boss. The VPN uses Client Config files to make static IPs for the client. The only thing i found in google was some changes to the VPN MTU settings (down to 1400) but no real help. Oh, and i forgot...all the windows machines just have OpenVPN start as a service. The Mac laptop uses tunnelblick (an OpenVPN GUI) and the Mac Desktops use OpenVPN in normal command line mode. Server Config: tun-mtu 1500 fragment 1450 mssfix 1450 management localhost #### port #### proto udp dev tun ca ####### cert ####### key ###### dh ###### server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-config-dir ccd route 10.8.0.0 255.255.255.252 client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status log Client Configs (all are simple variations on this) tun-mtu 1500 fragment 1450 mssfix 1450 client dev tun proto udp remote ######## #### resolv-retry infinite nobind persist-key presist-tun ca ##### cert ##### key ##### ns-cert-type server comp-lzo verb 3

Read the article

Installing Glassfish 3.1 on Ubuntu 10.10 Server

- by andand

I've used the directions here to successfully install Glassfish 3.0.1 on an virtualized (VirtualBox and VMWare) Ubuntu 10.10 Server instance without any real difficulty not resolved by more closely following the directions. However when I try applying them to Glassfish 3.1, I seem to keep getting stuck at section 6. "Security configuration before first startup". In particular, there are some differences I noted: 1) There are two keys in the default keystore. The 's1as' key is still there, but another named 'glassfish-instance' is also there. When I saw this, I deleted and recreated them both along with a 'myAlias' key which I was going to use where needed. 2) When turning the security on it seems like part of the server thinks it's on, but others don't. For instances: $ /home/glassfish/bin/asadmin set server-config.network-config.protocols.protocol.admin-listener.security-enabled=true server-config.network-config.protocols.protocol.admin-listener.security-enabled=true Command set executed successfully. $ /home/glassfish/bin/asadmin get server-config.network-config.protocols.protocol.admin-listener.security-enabled server-config.network-config.protocols.protocol.admin-listener.security-enabled=true Command get executed successfully. $ /home/glassfish/bin/asadmin --secure list-jvm-options It appears that server [localhost:4848] does not accept secure connections. Retry with --secure=false. javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake Command list-jvm-options failed. $ /home/glassfish/bin/asadmin --secure=false list-jvm-options -XX:MaxPermSize=192m -client -Djavax.management.builder.initial=com.sun.enterprise.v3.admin.AppServerMBeanServerBuilder -XX: UnlockDiagnosticVMOptions -Djava.endorsed.dirs=${com.sun.aas.installRoot}/modules/endorsed${path.separator}${com.sun.aas.installRoot}/lib/endorsed -Djava.security.policy=${com.sun.aas.instanceRoot}/config/server.policy -Djava.security.auth.login.config=${com.sun.aas.instanceRoot}/config/login.conf -Dcom.sun.enterprise.security.httpsOutboundKeyAlias=s1as -Xmx512m -Djavax.net.ssl.keyStore=${com.sun.aas.instanceRoot}/config/keystore.jks -Djavax.net.ssl.trustStore=${com.sun.aas.instanceRoot}/config/cacerts.jks -Djava.ext.dirs=${com.sun.aas.javaRoot}/lib/ext${path.separator}${com.sun.aas.javaRoot}/jre/lib/ext${path.separator}${com.sun.aas.in stanceRoot}/lib/ext -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver -DANTLR_USE_DIRECT_CLASS_LOADING=true -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory -Dorg.glassfish.additionalOSGiBundlesToStart=org.apache.felix.shell,org.apache.felix.gogo.runtime,org.apache.felix.gogo.shell,org.apache.felix.gogo.command -Dosgi.shell.telnet.port=6666 -Dosgi.shell.telnet.maxconn=1 -Dosgi.shell.telnet.ip=127.0.0.1 -Dgosh.args=--nointeractive -Dfelix.fileinstall.dir=${com.sun.aas.installRoot}/modules/autostart/ -Dfelix.fileinstall.poll=5000 -Dfelix.fileinstall.log.level=2 -Dfelix.fileinstall.bundles.new.start=true -Dfelix.fileinstall.bundles.startTransient=true -Dfelix.fileinstall.disableConfigSave=false -XX:NewRatio=2 Command list-jvm-options executed successfully. Also the admin console responds only to http (not https) requests. Thoughts?

Read the article

Port forwarding problem

- by Steve

I have a modem connecting to ADSL2 network and a router connecting to the modem. The rest of the machines all connect to the router. The modem has IP as 192.168.1.1 and the router's IP is 192.168.0.1. From the modem configuration, I can see that the modem thinks the router's IP is 192.168.1.2. I can visit the router by either using 192.168.0.1 or 192.168.1.2. Now I forward a port from the router to a private machine. It works. I can test it by typing 192.168.1.2 and it is redirected to the private machine. But if I use 192.168.0.1, it is still the router's configuration page. I also do a port forwarding on my modem. Since the modem sees only the router, I can only forward the port to the router's specific port. And I am thinking that by doing this, I can reach the private machine after two times port forwarding, once on the modem and once on the router. I also have a static public IP. I want to achieve the goal that when someone types the public IP, he will be redirected to the private machine. But when I use some online port forwarding tester, the result always says that the port is closed on the public IP. I have the questions: Why my router has two IPs? Why using one IP I can see the port forwarding result while using the other I cannot? I think the port forwarding only works when visiting from outside, rather than from both outside and inside. Otherwise, if I set port forwarding on my router/modem on port 80, I will never be able to see its original configuration page again. Everything is forwarded. Am I right? How can I achieve my goal described above? By achieve this, I will have a dedicated server of my own and the users can visit from the public IP. Anyone can correct me on any mistakes I made? I am using Netconn modem and D-Link DIR-300 router. Thank you very much for any help. Edit: Consider I have correctly setup the whole thing. Now I want to test my website by using public IP to visit it, but the port forwarding doesn't work. Does it consider that I am inside the local network and not using the port forwarding? If so, how can I do it? I ask my friends (outside my local network) to have a try and they can see the website. What should I do so that from the inside, I can do the testing? Thank you very much.

Read the article

shell script to start multiple Java programs from a directory at boot

- by zcourts

I'm not sure if this is the best approach to this, It's my first time doing all of this (including writing shell scripts). OS: Centos My problem: I want to start multiple shell scripts at boot. One of the shell scripts is to start my own services and 3 others are for third party services. The shell script to start my own services will be looking for jar files. I currently have two services (will change), written in Java. All services are named under convention prefix-service-servicename What I've done: I created the following directory structure /home/username/scripts init.sh boot/ boot/startthirdprtyservice1.sh boot/startthirdprtyservice2.sh boot/startthirdprtyservice3.sh boot/startmyservices.sh /home/username/services prefix-lib-libraryname.jar prefix-lib-libraryname.jar prefix-service-servicename.jar prefix-service-servicename.jar prefix-service-servicename.jar In init.sh I have the following: #!/bin/sh #This scripts run all executable scripts in the boot directory at boot #done by adding this script to the file /etc/rc.d/rc.local #nohup #run-parts /home/username/scripts/boot/* #for each file in the boot dir... # ignore the HUP (hangup) signal for s in ./boot/*;do if [ -x $s ]; then echo "Starting $s" nohup $s & fi done echo "Done starting bootup scripts " echo "\n" In the script boot/startmyservices.sh I have #!/bin/sh fnmatch () { case "$2" in $1) return 0 ;; esac ; return 1 ; } ##sub strin to match for SUBSTRING="prefix-service" for s in /home/username/services/*;do if [ -x $s ]; then #match service in the filename , i.e. only services are started if fnmatch "$SUBSTRING" "$s" ; then echo "Starting $s " nohup $s & fi fi done echo "Done starting Services" echo "\n" Finally: Usually you can stick a program in /etc/rc.d/rc.local for it to be run at boot but I don't think this works in this case, or rather I don't know what to put in there I've just learnt how to do this by reading up a bit so I'm not sure its particularly the best thing to do so any advice is appreciated. When I run init.sh nohup.out contains Starting the thirdparty daemon... thirdparty started... .... but nothing from myservices.sh and my Java services aren't running I'm not sure where to start debugging or what could be going wrong. Edit Found some issues and got it to work, used -x instead of -n to check if the string is none zero, needed the sub string check to also be if [[ $s = $SUBSTRING ]] ; then and this last one was just stupid, missing java -jar in front of $s Still unsure of how to get init.sh to run at boot though

Read the article

Building Python 3.2.3 on redhat 5: missing _posixsubprocess

- by Oz123

I am trying to build Python3 on a RHEL 5.7 machine, I successful managed to build Python 3.2.2, with : # Install required build dependencies yum install openssl-devel bzip2-devel expat-devel gdbm-devel readline-devel sqlite-devel # Fetch and extract source. Please refer to http://www.python.org/download/releases # to ensure the latest source is used. wget http://www.python.org/ftp/python/3.2/Python-3.2.tar.bz2 tar -xjf Python-3.2.tar.bz2 cd Python-3.2 # Configure the build with a prefix (install dir) of /opt/python3, compile, and install. ./configure --prefix=/opt/python3 make But I am failing (?) with Python 3.2.3: Failed to build these modules: _posixsubprocess Is this a problem that should bother me ? How do I build it? I found this patch, but it's not included in sources Python 3.2.3 I obtained from the website ... Applying this patch on my sources, didn't solve the problem ... Here is the output from stderr: ~/tmp/Python-3.2.3 $ make > build.log ldd: warning: you do not have execution permission for `/usr/local/lib/libreadline.so' /usr/bin/ld: skipping incompatible /usr/local/lib/libreadline.so when searching for -lreadline /usr/bin/ld: skipping incompatible /usr/local/lib/libreadline.a when searching for -lreadline /home/oznahum/tmp/Python-3.2.3/Modules/_posixsubprocess.c: In function '_close_open_fd_range_safe': /home/oznahum/tmp/Python-3.2.3/Modules/_posixsubprocess.c:205: error: 'O_CLOEXEC' undeclared (first use in this function) /home/oznahum/tmp/Python-3.2.3/Modules/_posixsubprocess.c:205: error: (Each undeclared identifier is reported only once /home/oznahum/tmp/Python-3.2.3/Modules/_posixsubprocess.c:205: error: for each function it appears in.) /usr/bin/ld: skipping incompatible /usr/local/lib/libz.so when searching for -lz /usr/bin/ld: skipping incompatible /usr/local/lib/libz.so when searching for -lz ~/tmp/Python-3.2.3 $ grep posix build.log gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -I. -IInclude -I./Include -DPy_BUILD_CORE -c ./Modules/posixmodule.c -o Modules/posixmodule.o ar rc libpython3.2m.a Modules/_threadmodule.o Modules/signalmodule.o Modules/posixmodule.o Modules/errnomodule.o Modules/pwdmodule.o Modules/_sre.o Modules/_codecsmodule.o Modules/_weakref.o Modules/_functoolsmodule.o Modules/operator.o Modules/_collectionsmodule.o Modules/itertoolsmodule.o Modules/_localemodule.o Modules/_iomodule.o Modules/iobase.o Modules/fileio.o Modules/bytesio.o Modules/bufferedio.o Modules/textio.o Modules/stringio.o Modules/zipimport.o Modules/symtablemodule.o Modules/xxsubtype.o building '_posixsubprocess' extension gcc -pthread -fPIC -fno-strict-aliasing -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -IInclude -I/home/oznahum/localroot/include -I. -I./Include -I/usr/local/include -I/home/oznahum/tmp/Python-3.2.3 -c /home/oznahum/tmp/Python-3.2.3/Modules/_posixsubprocess.c -o build/temp.linux-x86_64-3.2/home/oznahum/tmp/Python-3.2.3/Modules/_posixsubprocess.o _posixsubprocess

Read the article

Can't get Apache 2.2.21 to compile with OpenSSL support

- by angstwad

Alright -- having a bad couple days here compiling Apache 2.2.21 on CentOS 5.7 with the following configure commands: ./configure --enable-ssl=shared --with-ssl=/usr/local/openssl I've compiled from source OpenSSL 1.0.0e from source: ./config --prefix=/usr/local --openssldir=/usr/local/openssl shared zlib-dynamic I attempt to start Apache and it returns: httpd: Syntax error on line 54 of /usr/local/apache2/conf/httpd.conf: Cannot load /usr/local/apache2/modules/mod_ssl.so into server: /usr/local/apache2/modules/mod_ssl.so: undefined symbol: SSL_get_servername If I look at how the libraries are linked, this is what I get: [root@web1 modules]# ldd mod_ssl.so libssl.so.6 => /lib64/libssl.so.6 (0x00002aaaaace4000) libcrypto.so.6 => /lib64/libcrypto.so.6 (0x00002aaaaaf30000) libdl.so.2 => /lib64/libdl.so.2 (0x00002aaaab281000) libz.so.1 => /lib64/libz.so.1 (0x00002aaaab486000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00002aaaab69a000) libc.so.6 => /lib64/libc.so.6 (0x00002aaaab8b5000) libgssapi_krb5.so.2 => /usr/lib64/libgssapi_krb5.so.2 (0x00002aaaabc0e000) libkrb5.so.3 => /usr/lib64/libkrb5.so.3 (0x00002aaaabe3c000) libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00002aaaac0d1000) libk5crypto.so.3 => /usr/lib64/libk5crypto.so.3 (0x00002aaaac2d4000) /lib64/ld-linux-x86-64.so.2 (0x0000555555554000) libkrb5support.so.0 => /usr/lib64/libkrb5support.so.0 (0x00002aaaac4f9000) libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00002aaaac702000) libresolv.so.2 => /lib64/libresolv.so.2 (0x00002aaaac904000) libselinux.so.1 => /lib64/libselinux.so.1 (0x00002aaaacb19000) libsepol.so.1 => /lib64/libsepol.so.1 (0x00002aaaacd32000) Basically, I've tired compiling from source OpenSSL (both 0.9.8r and 1e), having yum reinstall from the repos, done a make clean and remade both OpenSSL and Apache numerous times -- but I can't get it to compile into the apache base or dynamically as a shared object file. What am I doing wrong here? Update 1: After doing a make clean and make distclean, I've reconfigured with the same parameters as above without any effect. The config.log is at Pastebin. Update 2: Modifying the LD_LIBRARY_PATH had no effect on the lib-deps of mod_ssl.so. UPDATE 3: I've compiled and recompiled many times, and verified with ldconfig that the OpenSSL libs dir is in my path, and included in ld.so.conf. Still cannot get httpd/mod_ssl to load the library at runtime.

Read the article

Squid Proxy: url_regex acl is not working?

- by bharathi

I am using squid proxy 3.1 in ubuntu machine. I want to allow only urls matching our pattern through our proxy server. I configured acl like below. Acl for dstdomain is working fine. If i access any url besides .zmedia.com , I got proxy connection refused. But the url_regex is not working. What i am trying here is. Allow only request from ".zmedia.com" domain and the request url should be in "/blog" context. # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 ::1 acl urlwhitelist url_regex -i ^http(s)://([a-zA-Z]+).zmedia.com/blog/.*$ acl allowdomain dstdomain .zmedia.com acl Safe_ports port 80 8080 8500 7272 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl SSL_ports port 7272 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager http_access deny !allowdomain http_access allow urlwhitelist http_access allow CONNECT SSL_ports http_access deny CONNECT !SSL_ports # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 3128 # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. #cache_dir ufs /var/spool/squid 100 16 256 # Leave coredumps in the first cache dir coredump_dir /var/spool/squid append_domain .zmedia.com # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 Please correct me , If i did anything wrong?

Read the article

Mongodb: why is my mongo server using two PID's?

- by Lucas

I started my mongo with the following command: [lucas@ecoinstance]~/node/nodetest2$ sudo mongod --dbpath /home/lucas/node/nodetest2/data 2014-06-07T08:46:30.507+0000 [initandlisten] MongoDB starting : pid=6409 port=27017 dbpat h=/home/lucas/node/nodetest2/data 64-bit host=ecoinstance 2014-06-07T08:46:30.508+0000 [initandlisten] db version v2.6.1 2014-06-07T08:46:30.508+0000 [initandlisten] git version: 4b95b086d2374bdcfcdf2249272fb55 2c9c726e8 2014-06-07T08:46:30.508+0000 [initandlisten] build info: Linux build14.nj1.10gen.cc 2.6.3 2-431.3.1.el6.x86_64 #1 SMP Fri Jan 3 21:39:27 UTC 2014 x86_64 BOOST_LIB_VERSION=1_49 2014-06-07T08:46:30.509+0000 [initandlisten] allocator: tcmalloc 2014-06-07T08:46:30.509+0000 [initandlisten] options: { storage: { dbPath: "/home/lucas/n ode/nodetest2/data" } } 2014-06-07T08:46:30.520+0000 [initandlisten] journal dir=/home/lucas/node/nodetest2/data/ journal 2014-06-07T08:46:30.520+0000 [initandlisten] recover : no journal files present, no recov ery needed 2014-06-07T08:46:30.527+0000 [initandlisten] waiting for connections on port 27017 It appears to be working, as I can execute mongo and access the server. However, here are the process running mongo: [lucas@ecoinstance]~/node/testSite$ ps aux | grep mongo root 6540 0.0 0.2 33424 1664 pts/3 S+ 08:52 0:00 sudo mongod --dbpath /ho me/lucas/node/nodetest2/data root 6541 0.6 8.6 522140 52512 pts/3 Sl+ 08:52 0:00 mongod --dbpath /home/lu cas/node/nodetest2/data lucas 6554 0.0 0.1 7836 876 pts/4 S+ 08:52 0:00 grep mongo As you can see, there are two PID's for mongo. Before I ran sudo mongod --dbpath /home/lucas/node/nodetest2/data, there were none (besides the grep of course). How did my command spawn two PID's, and should I be concerned? Any suggestions or tips would be great. Additional Info In addition, I may have other issues that might suggest a cause. I tried running mongo with --fork --logpath /home/lucas..., but it did not work. More information below: [lucas@ecoinstance]~/node/nodetest2$ sudo mongod --dbpath /home/lucas/node/nodetest2/data --fork --logpath /home/lucas/node/nodetest2/data/ about to fork child process, waiting until server is ready for connections. forked process: 6578 ERROR: child process failed, exited with error number 1 [lucas@ecoinstance]~/node/nodetest2$ ls -l data/ total 163852 drwxr-xr-x 2 mongodb nogroup 4096 Jun 7 08:54 journal -rw------- 1 mongodb nogroup 67108864 Jun 7 08:52 local.0 -rw------- 1 mongodb nogroup 16777216 Jun 7 08:52 local.ns -rwxr-xr-x 1 mongodb nogroup 0 Jun 7 08:54 mongod.lock -rw------- 1 mongodb nogroup 67108864 Jun 7 02:08 nodetest1.0 -rw------- 1 mongodb nogroup 16777216 Jun 7 02:08 nodetest1.ns Also, my db path folder is not the original location. It was originally created under the default /var/lib/mongodb/ and moved to my local data folder. This was done after shutting down the server via /etc/init.d/mongod stop. I have a Debian Wheezy server, if it matters.

Read the article

Slow wifi from Windows Server 2003 virtualized in XenServer

- by John Clayton

I'm a brand spanking new user of OS X, coming from a lifetime of Windows use. I've been setting up my new Macbook Pro and have run into a very unusual problem. Over wifi, I am unable to copy files to or from my Windows Home Server. The problem seems to exist only over wifi, and only to WHS. Here are the details of my setup: 2010 Macbook Pro (Core i7), OS X 10.6.3 Windows Home Server PP3 (virtualized in XenServer 5.5) Windows 7 Ultimate x64 desktop Windows 7 Ultimate x64 in Boot Camp D-Link DIR-655 wireless N router Here is what I've done to narrow down the problem: Files copy fine from WHS to OS X when using gigabit ethernet Files copy fine from desktop to OS X when using gigabit ethernet Files fail to copy from WHS to OS X when using wifi (error -51) Files copy fine from desktop to OS X when using wifi Files copy fine from WHS to Boot Camp when using wifi Files copy fine from desktop to Boot Camp when using wifi From what I can tell, it seems to be some sort of issue between OS X and WHS, but I can't for the life of me see what would be different between shares on WHS and my desktop. They are both connected using smb://ADDRESS (I've tried both by IP and name). I can browse the shares on the WHS, but copying to OS X fails. I originally found the issue while installing VS2010 off an ISO from WHS, mounted to a Windows 7 VM using VMware Fusion. During the installation the VM was unusable - even the clock got behind the host be about 8 minutes. Once I plugged in the ethernet and disabled the wifi things picked up and finished quickly. The Fusion 3.1 RC is the only I think of that I installed that may have messed with the wifi driver. I've also tried resetting the wifi router, and have changed it from being G & N to N-only. Under Boot Camp I get similar speeds as my wife's N laptop. Any ideas? Thanks! Update: The issue has been further narrowed down to Windows Server 2003, which Windows Home Server is based on, running in XenServer with the XenServer tools installed.

Read the article

Debugging IO limitation

- by Martin F

I have a Fedora box with some severe IO limitations which I have no idea how to debug. The server has a Areca Technology Corp. ARC-1130 12-Port PCI-X to SATA RAID Controller with 12 7200 RPM 1.5 TB disks and a Marvell Technology Group Ltd. 88E8050 PCI-E ASF Gigabit Ethernet Controller. uname -a output: 2.6.32.11-99.fc12.x86_64 #1 SMP Mon Apr 5 19:59:38 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux The server is a file server running Nginx with the stub status module enabled, so I can see the current amount of connections. The problem present itself when I have a high number of simultaneous connections in a writing state. Usually around 350, at this very moment it's at 590 and the server is almost unusable and stuck at 230mbit/s. If I run stop and hit 1 to see CPU core usages I have all 4 cores with around 99% io wait, if I run iotop the nginx workers are the only processes producing any read load, currently at around 25MB/s. I have each of the workers bound to their own core. Initially I figured it was just the disks being bugged. But I've run fscheck and smartmontools checks and found no errors. I also ran an iozone test which you can see the result of here: http://www.pastie.org/951667.txt?key=fimcvljulnuqy2dcdxa Additionally, when the amount of connections are low I have no problem getting a good speed. If I wget over the local network it easily hits 60MB/sec. Right now I just tried putting a file in /dev/shm, then I symlinked a file from the public dir to it and used wget over the local network and only got 50KB/s. Also, if I try to cp /dev/shm/test /root/test it quickly copies around 740MB and then slows down HEAVILY. Again with iotop reporting 99% iowait. I'm not really sure how to go about figuring out what the problems are. It could be a natural disk limitation but then the file from /dev/shm ought to transfer so it seems there's a network limit, but that's fine when there's not many connections. Perhaps it's a TCP stack problem but I really have no idea how to check that. Any suggestions on how to proceed with debugging would be very welcome. If additional information is required then let me know and I'll try to get it. Thanks.

Read the article

getting SIGSEGV in std::_List_const_iterator<Exiv2::Exifdatum>::operator++ whilst using jni

- by HJED

Hi I'm using jni to access the exiv2 API in my Java project and I'm getting a SIGSEGV error in std::_List_const_iterator::operator++. I'm uncertain how to fix this error. I've tried using high -Xmx values as well as running on both jdk1.6.0 (server and cacao JVMs) and 1.7.0 (server JVM). gdb traceback: #0 0x00007fffa36f2363 in std::_List_const_iterator<Exiv2::Exifdatum>::operator++ (this=0x7ffff7fd3500) at /usr/include/c++/4.4/bits/stl_list.h:223 #1 0x00007fffa36f2310 in std::__distance<std::_List_const_iterator<Exiv2::Exifdatum> > (__first=..., __last=...) at /usr/include/c++/4.4/bits/stl_iterator_base_funcs.h:79 #2 0x00007fffa36f224d in std::distance<std::_List_const_iterator<Exiv2::Exifdatum> > (__first=..., __last=...) at /usr/include/c++/4.4/bits/stl_iterator_base_funcs.h:114 #3 0x00007fffa36f1f27 in std::list<Exiv2::Exifdatum, std::allocator<Exiv2::Exifdatum> >::size (this=0x7fffa4030910) at /usr/include/c++/4.4/bits/stl_list.h:805 #4 0x00007fffa36f1d50 in Exiv2::ExifData::count (this=0x7fffa4030910) at /usr/local/include/exiv2/exif.hpp:518 #5 0x00007fffa36f1d30 in Exiv2::ExifData::empty (this=0x7fffa4030910) at /usr/local/include/exiv2/exif.hpp:516 #6 0x00007fffa36f1763 in getVars (path=0x7fffa401d2f0 "/home/hjed/PC100001.JPG", env=0x6131c8, obj=0x7ffff7fd37a8) at src/main.cpp:146 #7 0x00007fffa36f19d8 in Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv (env=0x6131c8, obj=0x7ffff7fd37a8, path=0x7ffff7fd37a0, obj2=0x7ffff7fd3798) at src/main.cpp:160 #8 0x00007ffff21d9cc8 in ?? () #9 0x00000000fffffffe in ?? () #10 0x00007ffff7fd3740 in ?? () #11 0x0000000000613000 in ?? () #12 0x00007ffff7fd3738 in ?? () #13 0x00007fffaa1076e0 in ?? () #14 0x00007ffff7fd37a8 in ?? () #15 0x00007fffaa108d10 in ?? () #16 0x0000000000000000 in ?? () Java error: # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007fac11223363, pid=11905, tid=140378349111040 # # JRE version: 6.0_20-b20 # Java VM: OpenJDK 64-Bit Server VM (19.0-b09 mixed mode linux-amd64 ) # Derivative: IcedTea6 1.9.2 # Distribution: Ubuntu 10.10, package 6b20-1.9.2-0ubuntu2 # Problematic frame: # C [libExiff2-binding.so+0x4363] _ZNSt20_List_const_iteratorIN5Exiv29ExifdatumEEppEv+0xf # # If you would like to submit a bug report, please include # instructions how to reproduce the bug and visit: # https://bugs.launchpad.net/ubuntu/+source/openjdk-6/ # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # --------------- T H R E A D --------------- Current thread (0x0000000000dbf000): JavaThread "main" [_thread_in_native, id=11909, stack(0x00007fac61920000,0x00007fac61a21000)] siginfo:si_signo=SIGSEGV: si_errno=0, si_code=128 (), si_addr=0x0000000000000000 Registers: ... Register to memory mapping: RAX=0x6c8948f0245c8948 0x6c8948f0245c8948 is pointing to unknown location RBX=0x00007fac0c042c00 0x00007fac0c042c00 is pointing to unknown location RCX=0x0000000000000000 0x0000000000000000 is pointing to unknown location RDX=0x6c8948f0245c8948 0x6c8948f0245c8948 is pointing to unknown location RSP=0x00007fac61a1f4e0 0x00007fac61a1f4e0 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE RBP=0x00007fac61a1f4e0 0x00007fac61a1f4e0 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE RSI=0x00007fac61a1f4f0 0x00007fac61a1f4f0 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE RDI=0x00007fac61a1f500 0x00007fac61a1f500 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R8 =0x00007fac0c054630 0x00007fac0c054630 is pointing to unknown location R9 =0x00007fac61a1f358 0x00007fac61a1f358 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R10=0x00007fac61a1f270 0x00007fac61a1f270 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R11=0x00007fac11223354 0x00007fac11223354: _ZNSt20_List_const_iteratorIN5Exiv29ExifdatumEEppEv+0 in /home/hjed/libExiff2-binding.so at 0x00007fac1121f000 R12=0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R13=0x00007fac13ad1be8 {method} - klass: {other class} R14=0x00007fac61a1f7a8 0x00007fac61a1f7a8 is pointing into the stack for thread: 0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE R15=0x0000000000dbf000 "main" prio=10 tid=0x0000000000dbf000 nid=0x2e85 runnable [0x00007fac61a1f000] java.lang.Thread.State: RUNNABLE Top of Stack: (sp=0x00007fac61a1f4e0) ... Instructions: (pc=0x00007fac11223363) ... Stack: [0x00007fac61920000,0x00007fac61a21000], sp=0x00007fac61a1f4e0, free space=1021k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) C [libExiff2-binding.so+0x4363] _ZNSt20_List_const_iteratorIN5Exiv29ExifdatumEEppEv+0xf C [libExiff2-binding.so+0x4310] _ZSt10__distanceISt20_List_const_iteratorIN5Exiv29ExifdatumEEENSt15iterator_traitsIT_E15difference_typeES5_S5_St18input_iterator_tag+0x26 C [libExiff2-binding.so+0x424d] _ZSt8distanceISt20_List_const_iteratorIN5Exiv29ExifdatumEEENSt15iterator_traitsIT_E15difference_typeES5_S5_+0x36 C [libExiff2-binding.so+0x3f27] _ZNKSt4listIN5Exiv29ExifdatumESaIS1_EE4sizeEv+0x33 C [libExiff2-binding.so+0x3d50] _ZNK5Exiv28ExifData5countEv+0x18 C [libExiff2-binding.so+0x3d30] _ZNK5Exiv28ExifData5emptyEv+0x18 C [libExiff2-binding.so+0x3763] _Z7getVarsPKcP7JNIEnv_P8_jobject+0x3e3 C [libExiff2-binding.so+0x39d8] Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv+0x4b j photo.exiv2.Exiv2MetaDataStore.impl_loadFromExiv(Ljava/lang/String;Lphoto/exiv2/Exiv2MetaDataStore;)V+0 j photo.exiv2.Exiv2MetaDataStore.loadFromExiv2()V+9 j photo.exiv2.Exiv2MetaDataStore.loadData()V+1 j photo.exiv2.Exiv2MetaDataStore.<init>(Lphoto/ImageFile;)V+10 j photo.ImageFile.<init>(Ljava/lang/String;)V+11 j test.Main.main([Ljava/lang/String;)V+67 v ~StubRoutines::call_stub V [libjvm.so+0x428698] V [libjvm.so+0x4275c8] V [libjvm.so+0x432943] V [libjvm.so+0x447f91] C [java+0x3495] JavaMain+0xd75 Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j photo.exiv2.Exiv2MetaDataStore.impl_loadFromExiv(Ljava/lang/String;Lphoto/exiv2/Exiv2MetaDataStore;)V+0 j photo.exiv2.Exiv2MetaDataStore.loadFromExiv2()V+9 j photo.exiv2.Exiv2MetaDataStore.loadData()V+1 j photo.exiv2.Exiv2MetaDataStore.<init>(Lphoto/ImageFile;)V+10 j photo.ImageFile.<init>(Ljava/lang/String;)V+11 j test.Main.main([Ljava/lang/String;)V+67 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( => current thread ) 0x00007fac0c028000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=11924, stack(0x00007fac11532000,0x00007fac11633000)] 0x00007fac0c025800 JavaThread "CompilerThread1" daemon [_thread_blocked, id=11923, stack(0x00007fac11633000,0x00007fac11734000)] 0x00007fac0c022000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=11922, stack(0x00007fac11734000,0x00007fac11835000)] 0x00007fac0c01f800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=11921, stack(0x00007fac11835000,0x00007fac11936000)] 0x00007fac0c001000 JavaThread "Finalizer" daemon [_thread_blocked, id=11920, stack(0x00007fac11e2d000,0x00007fac11f2e000)] 0x0000000000e36000 JavaThread "Reference Handler" daemon [_thread_blocked, id=11919, stack(0x00007fac11f2e000,0x00007fac1202f000)] =>0x0000000000dbf000 JavaThread "main" [_thread_in_native, id=11909, stack(0x00007fac61920000,0x00007fac61a21000)] Other Threads: 0x0000000000e2f800 VMThread [stack: 0x00007fac1202f000,0x00007fac12130000] [id=11918] 0x00007fac0c02b000 WatcherThread [stack: 0x00007fac11431000,0x00007fac11532000] [id=11925] ... Heap PSYoungGen total 18432K, used 632K [0x00007fac47210000, 0x00007fac486a0000, 0x00007fac5bc10000) eden space 15808K, 4% used [0x00007fac47210000,0x00007fac472ae188,0x00007fac48180000) from space 2624K, 0% used [0x00007fac48410000,0x00007fac48410000,0x00007fac486a0000) to space 2624K, 0% used [0x00007fac48180000,0x00007fac48180000,0x00007fac48410000) PSOldGen total 42240K, used 0K [0x00007fac1de10000, 0x00007fac20750000, 0x00007fac47210000) object space 42240K, 0% used [0x00007fac1de10000,0x00007fac1de10000,0x00007fac20750000) PSPermGen total 21248K, used 2831K [0x00007fac13810000, 0x00007fac14cd0000, 0x00007fac1de10000) object space 21248K, 13% used [0x00007fac13810000,0x00007fac13ad3d80,0x00007fac14cd0000) Dynamic libraries: ... VM Arguments: jvm_args: -Dfile.encoding=UTF-8 java_command: test.Main Launcher Type: SUN_STANDARD Environment Variables: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games USERNAME=hjed LD_LIBRARY_PATH=/usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server:/usr/lib/jvm/java-6-openjdk/jre/lib/amd64:/usr/lib/jvm/java-6-openjdk/jre/../lib/amd64 SHELL=/bin/bash DISPLAY=:0.0 Signal Handlers: ... --------------- S Y S T E M --------------- OS:Ubuntu 10.10 (maverick) uname:Linux 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 libc:glibc 2.12.1 NPTL 2.12.1 rlimit: STACK 8192k, CORE 0k, NPROC infinity, NOFILE 1024, AS infinity load average:0.27 0.31 0.30 /proc/meminfo: MemTotal: 4048200 kB MemFree: 106552 kB Buffers: 838212 kB Cached: 1172496 kB SwapCached: 0 kB Active: 1801316 kB Inactive: 1774880 kB Active(anon): 1224708 kB Inactive(anon): 355012 kB Active(file): 576608 kB Inactive(file): 1419868 kB Unevictable: 64 kB Mlocked: 64 kB SwapTotal: 7065596 kB SwapFree: 7065596 kB Dirty: 20 kB Writeback: 0 kB AnonPages: 1565608 kB Mapped: 213424 kB Shmem: 14216 kB Slab: 164812 kB SReclaimable: 102576 kB SUnreclaim: 62236 kB KernelStack: 4784 kB PageTables: 44908 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 9089696 kB Committed_AS: 3676872 kB VmallocTotal: 34359738367 kB VmallocUsed: 332952 kB VmallocChunk: 34359397884 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 48704 kB DirectMap2M: 4136960 kB CPU:total 8 (4 cores per cpu, 2 threads per core) family 6 model 26 stepping 5, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, popcnt, ht Memory: 4k page, physical 4048200k(106552k free), swap 7065596k(7065596k free) vm_info: OpenJDK 64-Bit Server VM (19.0-b09) for linux-amd64 JRE (1.6.0_20-b20), built on Dec 10 2010 19:45:55 by "buildd" with gcc 4.4.5 main.cpp: jobject toJava(std::auto_ptr<Exiv2::Value> v, const char * type, JNIEnv * env) { jclass stringClass; jmethodID cid; jobject result; stringClass = env->FindClass("photo/exiv2/Value"); cid = env->GetMethodID(stringClass, "<init>", "(Ljava/lang/String;Ljava/lang/Object;)V"); jvalue val; if ((strcmp(type, "String") == 0) || (strcmp(type, "String") == 0)) { val.l = env->NewStringUTF(v->toString().c_str()); } else if (strcmp(type, "Short") == 0) { val.s = v->toLong(0); } else if (strcmp(type, "Long") == 0) { val.j = v->toLong(0); } result = env->NewObject(stringClass, cid, env->NewStringUTF(v->toString().c_str()), val); return result; } void inLoop(std::auto_ptr<MetadataContainer> md, JNIEnv * env, jmethodID mid, jobject obj) { jvalue values[2]; const char* key = md->key().c_str(); values[0].l = env->NewStringUTF(key); /** md->value().toString().c_str(); const char* value = md->typeName(); values[1].l = env->NewStringUTF(value); TODO: do type conversions */ //std::cout << md->typeName() << std::endl; /** const char* type = md->value().toString().c_str(); values[1].l = env->NewStringUTF(type);*/ values[1].l = toJava(md->getValue(), md->typeName(), env); env->CallVoidMethodA(obj, mid, values); } void getVars(const char* path, JNIEnv * env, jobject obj) { //Load image Exiv2::Image::AutoPtr image = Exiv2::ImageFactory::open(path); assert(image.get() != 0); image->readMetadata(); //load method jclass cls = env->GetObjectClass(obj); jmethodID mid = env->GetMethodID(cls, "exiv2_reciveElement", "(Ljava/lang/String;Lphoto/exiv2/Value;)V"); //Load IPTC data /**loadIPTC(image, path, env, obj, mid); loadEXIF(image, path, env, obj, mid);*/ Exiv2::IptcData &iptcData = image->iptcData(); if (mid != NULL) { //is there any IPTC data AND check that method exists if (iptcData.empty()) { std::string error(path); error += ": failed loading IPTC data, there may not be any data"; } else { Exiv2::IptcData::iterator end = iptcData.end(); for (Exiv2::IptcData::iterator md = iptcData.begin(); md != end; ++md) { std::auto_ptr<MetadataContainer> meta(new MetadataContainer(md)); inLoop(meta, env, mid, obj); } } Exiv2::ExifData &exifData = image->exifData(); //is there any Exif data AND check that method exists if (exifData.empty()) { //error occurs here (main.cpp:146) std::string error(path); error += ": failed loading Exif data, there may not be any data"; } else { Exiv2::ExifData::iterator end = exifData.end(); for (Exiv2::ExifData::iterator md = exifData.begin(); md != end; ++md) { std::auto_ptr<MetadataContainer> meta(new MetadataContainer(md)); inLoop(meta, env, mid, obj); } } } else { std::string error(path); error += ": failed to load method"; } } JNIEXPORT void JNICALL Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv(JNIEnv * env, jobject obj, jstring path, jobject obj2) { const char* path2 = env->GetStringUTFChars(path, NULL); getVars(path2, env, obj); env->ReleaseStringUTFChars(path, path2); } Thanks for any help, HJED EDIT This is the output when runing the jvm with the -cacao option: run: null:/usr/local/lib Error: Directory Olympus2 with 1536 entries considered invalid; not read. LOG: [0x00007ff005376700] We received a SIGSEGV and tried to handle it, but we were LOG: [0x00007ff005376700] unable to find a Java method at: LOG: [0x00007ff005376700] LOG: [0x00007ff005376700] PC=0x00007feffe4ee67d LOG: [0x00007ff005376700] LOG: [0x00007ff005376700] Dumping the current stacktrace: at photo.exiv2.Exiv2MetaDataStore.impl_loadFromExiv(Ljava/lang/String;Lphoto/exiv2/Exiv2MetaDataStore;)V(Native Method) at photo.exiv2.Exiv2MetaDataStore.loadFromExiv2()V(Exiv2MetaDataStore.java:38) at photo.exiv2.Exiv2MetaDataStore.loadData()V(Exiv2MetaDataStore.java:29) at photo.exiv2.MetaDataStore.<init>(Lphoto/ImageFile;)V(MetaDataStore.java:33) at photo.exiv2.Exiv2MetaDataStore.<init>(Lphoto/ImageFile;)V(Exiv2MetaDataStore.java:20) at photo.ImageFile.<init>(Ljava/lang/String;)V(ImageFile.java:22) at test.Main.main([Ljava/lang/String;)V(Main.java:28) LOG: [0x00007ff005376700] vm_abort: WARNING, port me to C++ and use os::abort() instead. LOG: [0x00007ff005376700] Exiting... LOG: [0x00007ff005376700] Backtrace (15 stack frames): LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x4ff54) [0x7ff004306f54] LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x5ac01) [0x7ff004311c01] LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x66e9a) [0x7ff00431de9a] LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x76408) [0x7ff00432d408] LOG: [0x00007ff005376700] /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/cacao/libjvm.so(+0x79a4c) [0x7ff004330a4c] LOG: [0x00007ff005376700] /lib/libpthread.so.0(+0xfb40) [0x7ff004d53b40] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZNSt20_List_const_iteratorIN5Exiv29ExifdatumEEppEv+0xf) [0x7feffe4ee67d] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZSt10__distanceISt20_List_const_iteratorIN5Exiv29ExifdatumEEENSt15iterator_traitsIT_E15difference_typeES5_S5_St18input_iterator_tag+0x26) [0x7feffe4ee62a] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZSt8distanceISt20_List_const_iteratorIN5Exiv29ExifdatumEEENSt15iterator_traitsIT_E15difference_typeES5_S5_+0x36) [0x7feffe4ee567] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZNKSt4listIN5Exiv29ExifdatumESaIS1_EE4sizeEv+0x33) [0x7feffe4ee22b] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZNK5Exiv28ExifData5countEv+0x18) [0x7feffe4ee054] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_ZNK5Exiv28ExifData5emptyEv+0x18) [0x7feffe4ee034] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(_Z7getVarsPKcP7JNIEnv_P8_jobject+0x3d7) [0x7feffe4ed947] LOG: [0x00007ff005376700] /home/hjed/libExiff2-binding.so(Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv+0x4b) [0x7feffe4edcdc] LOG: [0x00007ff005376700] [0x7feffe701ccd] Java Result: 134 BUILD SUCCESSFUL (total time: 0 seconds)

Search Results

Search found 20846 results on 834 pages for 'current dir'.

Page 382/834 | < Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389 | Next Page >

- by Chris Hoffman

- by charlie.mott

- by Steve Tunstall

- by Jian Zhang-Oracle

- by Alois Kraus

- by Ghilliedrone

- by Repieter

- by ToStringTheory

- by phobos7

- by Mara

- by Andy Shinn

- by KM01

- by John Quesie

- by Norris

- by Phsion

- by andand

- by Steve

- by zcourts

- by Oz123

- by angstwad

- by bharathi

- by Lucas

- by John Clayton

- by Martin F

- by HJED

< Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389 | Next Page >