Search Results

Search found 15439 results on 618 pages for 'wls configuration'.

Page 382/618 | < Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >

• Are Windows partitions gone?

  - by Gigili

  I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

  Read the article

• Designing business objects, and gui actions

  - by fozz

  Developing a product ordering system using Java SE 6. The previous implementations used combo boxes, text fields, and check boxes. Preforming validation on action events from the GUI. The validation includes limiting existing combo boxes items, or even availability. The issue in the old system was that the action was received and all rules were applied to the entire business object. This resulted in a huge event change as options were changed multiple times. To be honest I have no idea how an infinite loop wasn't produced. Through the next iteration I stepped in and attempted to limit the chaos by controlling the order in which the selections could be made. Making configuration of BO's a top down approach. I implemented custom box models, action events, beans/binding, and an MVC pattern. However I still am unable to fully isolate action even chains. I'm thinking that I've approached the whole concept backwards in an attempt to stay closest to what was already in place. So the question becomes what do I design instead? I'm currently considering an implementation of Interfaces, Beans, Property Change Listeners to manage the back and forth. Other thoughts were validation exceptions, dynamic proxies.... I'm sure there are a ton of different ways. To say that one way is right is crazy, and I'm sure it will take a blending of multiple patterns. My knowledge of swing/awt validation is limited, previously I did backend logic only. Other considerations are were some sort of binding(jgoodies or otherwise) to directly bind GUI state to BO's.

  Read the article

• How to connect a wifi router to a cable modem router?

  - by DavidD

  Here's the thing: I have a cable modem router (Thomson TCW710) with wifi-g that I rent from my cable company. I would like to use a wireless-n router (D-Link DIR-655, that I received for free) with it in order to take advantage of the faster wifi. I basically need advice on how to architecture my home network with these two beasts. What configuration should I need to apply on my old and new router to make it all work? The two routers will of course be connected together with a RJ-45 cable.

  Read the article

• External Full HD monitor and Virtual Desktop Size

  - by Stefan

  I have two FullHD monitors attached to my ATI graphics card [2]. The resolution of both of them is detected properly without any modifications to /etc/X11/xorg.conf. I can run both of them in clone mode. However, when I try to run them next to each other, I got the following error: The selected configuration for displays could not be applied. If tried to fix this according to [1]. My xorg.conf now looks like this: Section "Module" Load "glx" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" # The 1088 is the smallest multiple of 32 >= 1088 # see manpages Virtual 1920 1088 EndSubSection EndSection This does not seem to be parsed properly. After restarting X, I cannot set resolutions beyond 1600 or so any more. /var/log/Xorg.0.log gives: [ 15.676] (II) fglrx(0): Not using mode "1920x1080" (width too large for virtual size) [ 15.676] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size) Are my modifications syntactically incorrect? According to the man page, it should be fine. Any ideas? OS: Ubuntu 11.10 64bit [1] http://askubuntu.com/a/75546/5023 [2] 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series]

  Read the article

• custom domain point to tumblr blog

  - by Julius

  My domain mydomain.com is registered with godaddy. I wish to host my tumblr blog on this domain with nearlyfreespeech.net hosting. My active nameservers at godaddy already point to my authoritative ones at NFS.net which is working. However i'm baffled of the correct configuration to set to point to my Tumblr. Preferably id like (A) my domain http://mydomain.com to host the blog and have http://www.mydomain.com redirect also to http://mydomain.com If this is too difficult my next preference is (B) to have http://www.mydomain.com host the blog whilst http://mydomain.com redirects to http://www.mydomain.com My 3rd preference is to have (C) a sub-domain like http://tumblr.mydomain.com or http://tumblr.mydomain.com to host the blog and i guess have http://mydomain.com and http://www.mydomain.com both redirect to it. I've tried having two aliases mydomain.com and www.mydomain.com pointing to my permanent NFS ip at mydomain.nfshost.com and when i try to add: (1) an A record pointing mydomain.com to the ip 66.6.44.4 as per Tumblr's instructions it tells me i already have the bare domain as an alias so i cant do that. (2) the A record on the www.mydomain.com alias. I can do this with either www.mydomain.com set as an alias or not. But when i tried this with mydomain.com set as the canonical name the result when visiting either mydomain.com or www.mydomain.com was them both continually redirecting to eachother until an error was thrown. So i was wondering if there is a ninja that could save me some hairpulling and tell me the correct way to config A, or else B, or else C.

  Read the article

• Understanding ESXi and Memory Usage

  - by John

  Hi, I am currently testing VMWare ESXi on a test machine. My host machine has 4gigs of ram. I have three guests and each is assigned a memory limit of 1 GB (and only 512 MB reserved). The host summary screen shows a memory capacity of 4082.55 MB and a usage of 2828 MB with two guests running. This seems to make sense, two gigs for each VM plus an overhead for the host. 800MB seems high but that is still reasonable. But on the Resource Allocation Screen I see a memory capacity of 2356 MB and an available capacity of 596 MB. Under the configuration tab, memory link I see a physical total of 4082.5 MB, System of 531.5 MB and VM of 3551.0 MB. I have only allocated my VMs for a gig each, and with two VMs running they are taking up almost two times the amount of ram allocated. Why is this, and why does the Resource Allocation screen short change me so much?

  Read the article

• Forcing the from address when postfix relays over smtp

  - by John Whitlock

  I'm trying to get email reports from our AWS EC2 instances. We're using Exchange Online (part of Microsoft Online Services). I've setup a user account specifically for SMTP relaying, and I've setup Postfix to meet all the requirements to relay messages through this server. However, Exchange Online's SMTP server will reject messages unless the From address exactly matches the authentication address (the error message is 550 5.7.1 Client does not have permissions to send as this sender). With careful configuration, I can setup my services to send as this user. But I'm not a huge fan of being careful - I'd rather have postfix force the issue. Is there a way to do this?

  Read the article

• Share home directory between Linux and Windows dual boot

  - by user877329

  This question is somewhat similar to How to use Windows Share has home directory, but in this case Windows is not running. I have installed a dual-boot configuration with Ubuntu 12.04 and Windows. My Windows partition is mounted on /C. Now I want either Ubuntu to locate home directories in /C/Users Which is the location of windows accounts or I want Windows to use D:\home for home directories. (D is the name of the Ubuntu root directory). For the first approach, I have managed to create a test user account test-user:x:1004:1001:Test:/C/Users/test-user:/bin/bash The account works but test-user cannot run any X session. From .xsession-errors chmod: Changing rights on ”/C/Users/test-user/.xsession-errors”: Operation not permitted Would it help get rid of that chmod, which has no effect? How do I? If I use the second approach, I need the Ext2fsd driver, which seems to work, but I am not sure if Windows maps the Ext2 system that early. Here is my fstab proc /proc proc nodev,noexec,nosuid 0 0 UUID=e7cef061-ed8d-4a82-b708-0c8f4c6f297f / ext3 errors=remount-ro 0 1 UUID=2CDCEB43DCEB0644 /C ntfs defaults,umask=007,gid=46 0 0 UUID=b087b5c0-b4bd-47e7-8d34-48ad9b192328 none swap sw 0 0 Update: I found something here: http://www.tuxera.com/community/ntfs-3g-advanced/ Will work if i do a correct mapping between NT users and Linux users.

  Read the article

• Xorg crashes ever since using Nvidia dual monitors

  - by legion

  Well ever since I have used dual monitors with the NVIDIA X Server Settings program my xorg process has been crashing after a while, and its generally a pretty long while of like 6 hours afterwards. Before NVIDIA changed my xorg.conf file I only had xorg crash like twice in 2 months, I can't figure out what is going on. I am running ubuntu 12.04 with the MATE desktop environment v 1.2.0 xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LEN" HorizSync 51.8 - 55.8 VertRefresh 40.0 - 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "NVS 3100M" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0, CRT: nvidia-auto-select +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinViewXineramaInfoOrder" "DFP-1" Option "TwinView" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Setting up sendmail to perform mail routing

  - by Diden

  Is sendmail is able to do the following: Forward many user emails to office 365:- [email protected] -> [email protected] [email protected] -> [email protected] [email protected] -> [email protected] [email protected] -> [email protected] Forward the following to a separate server to run php scripts:- [email protected] [email protected] An autoresponder will be sent to the sender. Does anyone know of any sample configuration I could get this started on? Is there a good autoresponder for sendmail? Our emails are hosted on Office365 and it does not allow us to run scripts. Therefore I was considering this option. Is this viable? Please refer to the diagram for more information. Thank you.

  Read the article

• What URLs must be in IE's Trusted Sites list to allow Windows Update?

  - by ewall

  Particularly for servers in which IE Enhanced Security Configuration is enabled, you need to have all the Windows Update/Microsoft Update URLs in your "Trusted Sites" list in order to use the site. (Furthermore, for domain member servers where Group Policy enforces Internet Explorer's list of "Trusted Sites", you don't have the option to edit the Trusted Sites yourself... so all the necessary URLs should be listed in the GPO.) So, what is the full list of URLs I'll need in IE's Trusted Sites? So far I have the following: http(s)://*.update.microsoft.com http://download.windowsupdate.com http://windowsupdate.microsoft.com I seem to remember there being several more...

  Read the article

• Accessing WindowsXP shared printer from macbook?

  - by mobibob

  My new printer is setup on WindowsXP, it works and it is configured as a shared printer. I then setup a printer from Mac OSX 10.6.3 using the approved driver from the setup CD. I browsed for the printer via the network. When I send a test page, it queues, but never prints. Its as if the driver thinks the printer is local to the mac and just never finishes printing. THe configuration shows as: smb://dragoneye/CanonMP2 Where dragoneye is the name of the Windows XP server and the CanonMP2 is the little multi-purpose printer. My other Windows' CPU can setup and print. Is this a known problem or am I missing a setting??

  Read the article

• ASA 5505 8.4 open ports for subnet

  - by fwrawx

  I have an ASA 5505 running 8.4 with its outside interface plugged into our internal network. I want to open up access to hosts on one of the vlans behind that ASA to hosts on our internal network. I was just starting to grasp NAT on our older PIX but the ASA 8.4 has me confused now. Given a clean ASA with an outside vlan of 10.0.0.1/24 and test vlan of 10.0.1.1/24 what's the basic configuration needed to allow any hosts on the outside network to have access to any of the hosts on the test network?

  Read the article

• curl XPUT returning HTTP 500 error message

  - by pradeepchhetri

  I have added the following changes in nginx configuration. server { listen 8080; root /usr/share/nginx/www; client_body_temp_path /tmp/; dav_methods PUT DELETE MKCOL COPY MOVE; create_full_put_path on; dav_access user:rw group:rw all:rw; } I have my nginx configured with --with-http_dav_module also. But when I am trying to running the command: $ curl -XPUT http://172.16.31.127:8080/test.html -d 'test' I am getting 500 Internal Server error. Can anyone help me out in solving this.

  Read the article

• Subdomain redirect to WWW

  - by manix

  I have the domain example.com and the test.example.com running on apache server. For some reason when I try to visit test.example it is redirected to www.test.example and by consequence a Server not found error is displayed in the browser. Both .htaccess (root and subdomain folder) files are empty. Additional facts I have another subdomain xyz.example.com pointed to public_html/xyz directory with some content inside (index.html with "hello world message") and it works fine if I use xyz.example.com instead of www.xyz.example.com. So, can you help me to point to the right direction in order. I have a vps and I am able to change any file if is required. Below you can find my virtual host configuration. <VirtualHost xx.xxx.xxx:80> ServerName test.example.com ServerAlias www.test.example.com DocumentRoot /home/example/public_html/test ServerAdmin [email protected] UseCanonicalName Off CustomLog /usr/local/apache/domlogs/test.example.com combined CustomLog /usr/local/apache/domlogs/test.example.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." ScriptAlias /cgi-bin/ /home/example/public_html/test/cgi-bin/ # To customize this VirtualHost use an include file at the following location # Include "/usr/local/apache/conf/userdata/std/2/example/test.example.com/*.conf" </VirtualHost>

  Read the article

• Can't install the wireless driver in HP Pavilion dv2419us

  - by maqtanim

  I've just installed Ubuntu 13.04 in an old HP Pavilion dv2419us. The problem is, Ubuntu doesn't detect the wireless card. But it works fine in Windows 7. The following command returns nothing! lspci -vvnn | grep 14e4 And the lspci output is: 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: NVIDIA Corporation C51 [GeForce Go 6150] (rev a2) 00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3) 00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 05:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 05:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 05:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 05:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) The command lspci -nn | grep 0280 gives no output. Any suggestion regarding this?

  Read the article

• virtualbox and nginx server_name

  - by Ivan

  I'm trying to configure gitlab running in an Ubuntu 12.04 guest with Windows7 host. I can ssh the guest using port-forwarding and access the nginx server using port redirection (8888 in host is 80 in guest, so localhost:8888 in host gets to the nginx server in the guest), but the server_name in nginx configuration file is giving me trouble. What is the correct listen and server_name that nginx would accept? The guest has the NAT interface at 10.0.2.15 and Host-Only interface at 192.168.56.101, static. Thanks!

  Read the article

• Duplicate name exists solution

  - by user978733

  I have about 70 pc's with exactly same hardware. I decided to automate turning on and off. I took 1 PC. Here is what I've done: Changed bios configuration so that now pc's waking when I turn on AC switch Installed Windows XP and configured so that I can turn off remotelly, changed workgroup name to "WG1", and pc name to "ExamPC" Then created acronis backup image of this pc I installed this image in several PC's and tried to test All worked well till windows opened. The problem is, all tested PC's started Windows nearly at the same time, and all of them popped up error Duplicate name exist. I can't figure out any solution. Any suggestions?

  Read the article

• What should I do when the GETDEB repository is down?

  - by 13east

  I'm trying to install programs/files from the getdeb repo but get a "check your internet connection" error. Programs than I've tried include Qbittorrent and Mozilla-Plugin-VLC. Through the terminal I get the following errors: Err http://archive.getdeb.net/ubuntu/ natty-getdeb/apps qbittorrent amd64 2.8.2-1~getdeb2 Could not connect to archive.getdeb.net:80 (209.105.191.78). - connect (113: No route to host) E: Failed to fetch http://archive.getdeb.net/ubuntu/pool/apps/q/qbittorrent/qbittorrent_2.8.2-1~getdeb2_amd64.deb: Could not connect to archive.getdeb.net:80 (209.105.191.78). - connect (113: No route to host) & Err http://archive.getdeb.net/ubuntu/ natty-getdeb/apps mozilla-plugin-vlc amd64 1.1.10-1~getdeb1 Could not connect to archive.getdeb.net:80 (209.105.191.78). - connect (113: No route to host) E: Failed to fetch http://archive.getdeb.net/ubuntu/pool/apps/v/vlc/mozilla-plugin-vlc_1.1.10-1~getdeb1_amd64.deb: Could not connect to archive.getdeb.net:80 (209.105.191.78). - connect (113: No route to host) I'm not having any problems adding/removing other programs/files from my machine. Is there a problem with GETDEB repo (and if so, is there any way to fix it on my end) or is there something wrong with my computer's configuration?

  Read the article

• RAID--0 " TWO " DRIVES SSD ONLY Should I use on-board / Software RAID OR a RAID Card / Control

  - by Wes

  I am looking at going with a TWO Drive Only SSD RAID-0 Configuration And was wondering if I would get better performance / Speed from the Use of a RAID Controller / Card Verses just using the Software RAID on my Mother Board. I have herd conflicting reports , Again I only Plan on Running " 2 " SSD Drives in RAID-0 Config I have No- problem spending the extra money for a good controller but only if I am going to benifit performance wise , Otherwise if there is no notable Gain I will just use the Software RAID that my HP-180-T came with Intel- 3.33 GHZ , 6-Core , 12-GB of DDR-3. I have a huge External drive for All Storage and am not concerned about Data loss just looking for pure speed. And if a Controller will benifit my performance Wht type of card would one suggest?

  Read the article

• Google Chrome on Ubuntu 12.04 not rendering webpages correctly

  - by sumit_gt

  I am facing some serious web page rendering issues with Chrome. It is more prominent during javascript based animations and stuff on websites like youtube. I have tried removing chrome using (sudo apt-get purge google-chrome-stable) and then reinstalling it. But the problems still persist. The same webpages work correctly on firefox on ubuntu and chrome on windows. The problem only shows up when I use chrome on ubuntu. I think the issue has started after I updated to the latest version of Chrome. I have used Chrome previously on this machine without any problems. I have attached a image that demonstrates the issue. What could possibly be the problem? PS: here's the output of lshw -c video: *-display description: VGA compatible controller product: Madison [Radeon HD 5000M Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:46 memory:e0000000-efffffff memory:f0020000-f003ffff ioport:d000(size=256) memory:f0000000-f001ffff Here's the output of lspci -nn: output of lspci -nn

  Read the article

• Strange resolution on Ubuntu 11.10

  - by FSchmidt

  I only just installed Ubuntu 11.10, so excuse me if this question is silly ;-) I have a Fujitsu Esprimo Mobile V655, nvidia 8200 graphics, and recently installed Ubuntu 11.10 using wubi. I had to modify booting commands to include nomodeset; otherwise Ubuntu would not boot. Now I did set my screen resolution to 1280 x 720, which is the correct resolution for this screen. Still, the display seems imperfect. The font sizes seem unnatural(too large / stretched) and text is quite blurry (especially in Firefox). Could it have something to do withe the nvidia graphics driver and/or the nomodeset parameter? How can I fix this? Update: I used jockey-gtk to update nvidia to the current version. This improved the resolution dramatically (no blurriness, fonts are good). It also means that I no loger need to include nomodesetin the boot commands. However, other problems were brought up by this. It seems that certain files cannot be accessed - icon (images) are missing, some task bars are completely unstyled (grey, block-form, win97 style). I also get this error message(roughly translated from German, so may be slightly different from actual) every time I reboot: Could not apply the stored configuration for the monitor: none of the chosen modi is compatible with the available modi. I have tried nvidia-xconfig, unity --reset , no improvements. Can anyone help, please?

  Read the article

• How do you reset the range of available ports that libvirt autoport can use?

  - by bcmcfc

  Libvirt is using its autoport setting to automatically allocate ports within a range starting at 5900. Example excerpt from an XML configuration for a VM: <graphics type='spice' port='6000' autoport='yes' listen='127.0.0.1' keymap='en-gb'> <listen type='address' address='127.0.0.1'/> </graphics> Currently, there are free ports at various points within the range 5900 to 5999. However, newly booted VMs are picking up ports from 6000 on. I need for it to reuse the available ports in the 59xx range. Is this possible? If so, how do I do this? The problem arose because VMs are being accessed via websockets, and it tried to use 6000 which is a reserved port for X11. A solution that explains how to blacklist ports from being picked up by autport would also be sufficient.

  Read the article

• Installing libssh2 on debian

  - by Ajay

  Hi I'm trying to install libssh2 for 64-bit. I'm using the following code for installation: cd libssh2-1.4.3/ export CFLAGS="-mabi=64 -march=mips64r2" ./configure --with-libz --with-libgcrypt --with-libz-prefix=`pwd`/../../support__ libs/libs/zlib/ --with-libgcrypt-prefix=`pwd`/../../support_libs/``libs/extra --wii thout-libssl-prefix --prefix=`pwd`/../../support_libs/libs/extra_2 make && make install without using "export CFLAGS="-mabi=64 -march=mips64r2" it compiles the binaries in 32-bit and whem i use #export for 64-bit, it gives this configuration error:: checking for libgcrypt... no configure: error: cannot find OpenSSL or Libgcrypt, try --with-libssl-prefix=PATH or --with-libgcrypt-prefix=PATH make: *** No targets specified and no makefile found.

  Read the article

• Dell PowerEdge 6850 Degraded HDD

  - by Matt

  Good Morning, We have a dell power edge 6850 with a degraded drive in the RAID array. I have never had to recover such an issue, so any help or advice would be welcome. Basically it hasn't affected the server at an operating system level, but has slowed down performance, I have a replacement drive in hand but as this is our main database server I want to proceed with extreme caution. My options as I see them are - Can I just hot swap the degraded drive with the new one and the data will automatically re-sync and we are all back to normal presumably this is dependant on the current raid configuration? reading various comments on-line I may need to re-configure the RAID array and re-build the broken drive? This screams disaster to me with the main worry being that I wipe any other data. Option 1 would of course make my day. Thanks in advance

  Read the article

< Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >