Search Results

Search found 15439 results on 618 pages for 'wls configuration'.

Page 381/618 | < Previous Page | 377 378 379 380 381 382 383 384 385 386 387 388  | Next Page >

  • Dual Monitor 'How To' for 12.04

    - by Kim Prince
    I recently built my own PC and was delighted with the result, except for a problem with dual monitors. After having tried a few different combinations of hardware, I think what I really need is a 'how to' explanation. My motherboard is an MSI Z77MA-G45, which has an analogue, a DVI, and a HDMI port. Initially I hooked monitors up to the DVI and analogue port and it seemed to work fine. Both screens worked independently of each other, it was great. After a few days I started turning my PC off at night, and when I tried to turn it back on it would boot into the terminal mode. I would have to turn one of the monitors off and after rebooting a few times, it would eventually boot into an X Window session. Occasionally I would see an error relating to Xorg. I upgraded the motherboard BIOS but that made no difference. Eventually, I installed a graphics card - an NVIDIA GeForce GT 520. Now it seems that my on board graphics have been disabled completely, and I am reliant on the graphics card. Furthermore, the graphics card seems to only recognise one screen at a time. (The first time I rebooted with both plugged in, it flashed up a message saying that it was auto-selecting DVI). Anyhow, I think I need some 'how to' (or perhaps 'where to'), from here. For example, is X Windows configuration the next place to look? And how do I go about configuring X Windows? (Note that in Systems Settings it says my graphics driver is 'unknown', and when I ask it to detect monitors, it sees only the one!)

    Read the article

  • What's causing "shutdown state" after TFTP reloaded Cisco `running-config` on 871?

    - by xtian
    Cisco CCP Write Configuration borked my 871w config while I was trying to setup port forwarding. I tested the 871's flash memory with fsck and rewrote the minimal config for TFTP (which is the same for Cisco's CCP app.). Thne, I successfully uploaded a previously working running-config from Win Vista using SolarWinds TFTP Server, unfortunately the restore was not entirely successful. The old running config was saved to the 871's startup-config and I can login using console port. Some other things that are working are the hostname and welcome message but that's about it. Startup shows an error SETUP: new interface NVI0 placed in "shutdown" state after tftp. The missing light on the access point modem for ethernet link show the 871'a outside FE4 is not working. SO...what's the possible problem with reloading a previously working config (approximately 4 months with the same config) via TFTP? Is there something I can look for on the 871 to verify the config?

    Read the article

  • How can I create an AMI from an existing EC2 instance?

    - by Arkaaito
    (I suspect that this may already be answered somewhere, since it seems like it would be a common operation. But I can't find it, so...) I am a relative AWS newbie. I have inherited a running Amazon EC2 instance, with various items (Apache, MySQL, Sphinx, ...) installed on it and a bunch of configuration. I'd like to turn it into an AMI that I can spin up other instances from. I can't find any information on creating a custom AMI on Amazon's site - only the fact that you can, repeatedly referenced, as if to taunt me... I believe this is not an EBS-backed instance, just an "ordinary" one. I do not know what AMI it was originally created from. How would I create an AMI that I could use for spinning up other instances which will be identical except for the hostname?

    Read the article

  • Understanding ESXi and Memory Usage

    - by John
    Hi, I am currently testing VMWare ESXi on a test machine. My host machine has 4gigs of ram. I have three guests and each is assigned a memory limit of 1 GB (and only 512 MB reserved). The host summary screen shows a memory capacity of 4082.55 MB and a usage of 2828 MB with two guests running. This seems to make sense, two gigs for each VM plus an overhead for the host. 800MB seems high but that is still reasonable. But on the Resource Allocation Screen I see a memory capacity of 2356 MB and an available capacity of 596 MB. Under the configuration tab, memory link I see a physical total of 4082.5 MB, System of 531.5 MB and VM of 3551.0 MB. I have only allocated my VMs for a gig each, and with two VMs running they are taking up almost two times the amount of ram allocated. Why is this, and why does the Resource Allocation screen short change me so much?

    Read the article

  • Access VirtualBox-ed server from behind the router

    - by migajek
    I'm having the following configuration: Windows 7 hosting VirtualBox and it's guest: Ubuntu The machine (physical) which runs VirtualBox is behind the router and has the address of 192.168.0.110 VirtualBox runs the Bridged network, and the IP of VirtualBox-ed Ubuntu (eth0) is 192.168.0.200 Host (Win7) is running HTTP service on port 80, while guest (Ubuntu) is running it's service on port 9000 I can access both services from inside the network by typing the ip_address:port and this works fine. Both ports are forwarded on the router to their's respective IPs: 80 -> 192.168.0.110:80 9000 -> 192.168.0.200:9000 Unfortunately, accessing the router's external IP doesn't work as expected. While external_ip:80 works correctly, external_ip:9000 - doesn't I believe the problem is VBox - related, since the same network is running also other physical machine with Ubuntu and http service on 8000 and this one is forwarded correctly.

    Read the article

  • Telugu (unicode) font rendering in emacs

    - by Prakash K
    I sometimes edit text in telugu language. However, when I open the file (UTF-8 encoded) in GNU emacs (version 23.1.50.1 on Ubuntu Jaunty) the text rendering is incorrect. The same text file opened in gedit is rendered correctly. Here's a snippet: ????????? ???? ???? ???????? rendred in gedit: And, the emacs rendering of the same text: Wherever glyphs need to be composited (not sure if it's the right word), emacs (or whatever library it uses) is not doing it right. Is there anyway to fix this? Perhaps tuning some setting in my configuration? Any ideas, please?

    Read the article

  • How do I stop track changes from turning on automatically in Word 2007

    - by Benj
    Whenever I open an existing document in Word 2007 (on Windows XP), word turns on track changes, and changes the display mode to "Final" (that is, not "Final Showing Markup" -- so I often don't even notice track changes is on if I don't remember to pay attention. This happens for ALL existing documents, and doesn't happen for new documents. I can't find any option in the configuration that would control this behavior. I would like to restore the original/default behavior where documents are opening with Track Changes off, and in "Final showing markup" display. Steps to Reproduce Open Word 2007. Create a new document. Verify that track changes is off. Save the document and close Word. Open the document (either directly or through Word). Track changes is now on. Any ideas?

    Read the article

  • virtualbox and nginx server_name

    - by Ivan
    I'm trying to configure gitlab running in an Ubuntu 12.04 guest with Windows7 host. I can ssh the guest using port-forwarding and access the nginx server using port redirection (8888 in host is 80 in guest, so localhost:8888 in host gets to the nginx server in the guest), but the server_name in nginx configuration file is giving me trouble. What is the correct listen and server_name that nginx would accept? The guest has the NAT interface at 10.0.2.15 and Host-Only interface at 192.168.56.101, static. Thanks!

    Read the article

  • Setup SVN repository subfolder specific write permission

    - by Hai Lang
    I need to setup a SVN repository which the devgroup should have full privilege to read and write except for two sub folders /1 and /2. For /1 and /2, four users should have write permission and all other users should only have read permission. I put the following into the configuration file, but people in devgroup still have write permission in /1 and /2. Any help would be highly appreciated. [project:/] @devgroup = rw [project:/1] @devgroup = r user1 = rw user2 = rw user3 = rw user4 = rw [project:/2] @devgroup = r user1 = rw user2 = rw user3 = rw user4 = rw

    Read the article

  • Storing bundled AMI:s at Amazon EC2

    - by Industrial
    Hi everybody, I am totally new on configuring servers and working with EC2, so please bare with me. I managed after a lot of hair pulling to get a server with Ubuntu up and running with memcached and some other goodies that would make a great package for me. I thought that however, when storing it as an AMI with this tool I would be able to have memcached available next time I launched an instance based upon that image. What can I do to make sure that my configuration is saved properly to an instance? Question number two: - Can I someway make a command that is automatically run on server creation, like initiating memcache with "memcache -d -m 1700 -u root" or even a batch of them?

    Read the article

  • Apache Upgrade Version

    - by mcondiff
    I have a live server that I need to upgrade Apache from 2.2.10 to 2.2.15 on Windows Server 2003. I have just inherited this server and need the fastest way to upgrade to the latest stable version without much downtime and without messing up my configuration. My first thought is to copy the httpd.conf, uninstall the current Apache, install the latest stable Apache version and then replace the httpd.conf with the previous live version. Anyone see a problem or pitfall with that? How does a Server Pro do something like this. (I'm a programmer and am new to server systems administration).

    Read the article

  • Debian Wheezy, hostapd running but no AP detected by clients

    - by f0o
    I've an TL-WN951N (AR5416+AR5008) using ath9k module running an hostapd and a dhcp for it. So hostapd starts fine: $ hostapd wifi.test Configuration file: wifi.test Using interface int1 with hwaddr f4:ec:38:9b:d4:93 and ssid 'test' hostapd.conf: interface=int1 driver=nl80211 ssid=test channel=1 But nobody seems to find it or being able to see it or connect to it by setting BSSID to 'test'. I'm quite frustrated now, I find 'howto' after 'howto' from people with same chipsets and it always seemed to work out great for them - but not here... iw list even shows up the AP mode being present at the interface... Thanks for your help

    Read the article

  • how to resolve all externally unresolved DNS queries ?

    - by red eyes dev
    I am using PowerDns on a Linux box (Debian 6). I would like to set up the powerdns server to resolve all externally unresolved DNS queries to a given, internal host. Is this possible? How is it done? I think it's necessary to use pdns-recursor, but my configuration file doesn't works ! I use mysql for backend. I add manually google.com and it's works, but if I delete entry I have "server failed", root dns (or isp dns) don't answer me.

    Read the article

  • How *NAT* was Implemented in Home Based Routers ? [closed]

    - by Sumit Arora
    Different Types of Home-Based Routers Exist, and those routers provide NAT Feature as well e.g; and most of them are Port Restricted. Q-1 : What kind of Base Softwares Manufactures use to develop NAT Functionality ? Q-2 : Is that Technology Proprietary ? Or some Open-Source used to develop that e.g; Firehol ? Q-3 : I am looking for a software which works exactly like a NAT,and by doing very basic configuration it should work either Symmetric NAT, Port Restricted NAT or Address Restricted NAT ? So that I can test some of my Network Application which are dependent on NAT via this way on same PC ? e.g; I can test my developed ICE Algorithms

    Read the article

  • How much does the geographical location of DNS servers matter?

    - by GreatFire
    We have started to run our own DNS servers located in Asia since that's where our main audience is. However, it seems that some users in the US are having difficulties accessing our website sometimes. I've noticed myself that DNS lookups of our domain from the US are relatively slow (500 msec+). Maybe the problems some users are having are due to other DNS configuration errors, but in general, how much of an issue is the geographical location of DNS servers? Should we have an additional server in the US?

    Read the article

  • Best technique for reusing a Windows system image across configurations

    - by Martin Wiboe
    We are a small company that provides solutions for ventilation systems. Part of the solution is a "controller" which communicates with the ventilation equipment. These controllers are simply Dell computers that come with our Windows 7 system image on them and sometimes some special hardware. We typically do a batch of 10 controllers at a time. We have been using Norton Ghost to apply the system image, but this process breaks because Dell changes the system configuration often, and our Windows image now does not contain the correct drivers. This is especially a problem when they change the RAID controller. To improve this, I see 2 options: use some kind of virtualization and install a hypervisor on each PC. This would solve the driver problem, but probably cause trouble with our special hardware. use some method of adding the proper drivers to our Windows image in offline mode. I haven't got much experience in either of these approaches. How would you solve our problem?

    Read the article

  • Alerting when a RAID Array disk fails locally on VMWare ESX or ESXi System

    - by Tim K
    With ESX and ESXi, we recently had two systems where that the boot partition became degraded due to a failed disk. The only alert we managed to capture was the visual alert on the Dell servers. We failed to received any electronic alerts regarding the failed or degraded array. Does anyone have any experience with monitoring for these types of failures? In both cases, the servers were running in a RAID 5 SCSI configuration (5 disks on one system, 3 disks on another) which if we were running a Windows Server OS, we would have had an alert created in the Eventviewer. Where would I begin to look for this solution. Can it be configured in VCenter or vFoglight?

    Read the article

  • Load Testing Linux Virtual Server

    - by Anubhav Agarwal
    I have configured a Linux virtual network with following configuration 172.17.6.112- VIP 172.17.6.111- Linux Director | |----------172.17.6.113 --- Real Server 1 |----------172.17.6.114 --- Real Server 2 I am using direct routing technique. I am unable to test my LVS network. Are there some good scripts/softwares available for load testing. I am running apache2.0 service on them. I came across with testlvs on the internet but am unable to understand its documentation. Are there more simpler ones I want to test the response time of server using various scheduling algorithms .

    Read the article

  • Out Of Memory Error - Magento

    - by robobobobo
    Ok normally I understand when my server is giving me out of memory errors, but this one has me stumped! I'm running a magento based site, with one or two plugins in it and the rest is pretty basic. The site runs and loads fine wiht no issues. However in the backend - Configuration - Payment Methods it gives me the following out of memory error Fatal error: Out of memory (allocated 39059456) (tried to allocate 85 bytes) in ########/Varien/Simplexml/Element.php on line 84 Now this is where I'm confused..it's allocated more than it tried to allocate? Am I correct there? So how is it running out of memory? My server has 6Gb ram, an SSD and 2 CPU's running WHM with a few other low traffic sites on it. I set my php memory limit to 100mb, 1000mb and finally unlimited but all to no avail! I'm completely lost here, would really appreciate some expertise on this Cheers

    Read the article

  • Raid on ICH9R chip set

    - by user500982
    Hi Im looking at buyign this MB: http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPE-HF-D525.cfm Im wondering though if the chipset will support the raid configuration I need. Im looking to configure the following arrays: raid array 1: 2 2TB Disks in Raid 0 raid array 2: 2 2TB Disks in Raid 0 raid array 3 (not actualy an array): 1 300GB Disk not in raid, to be used for OS and boot. So in total there would be 5 drives and the board supports 6. so im good when it comes to connections. However I have herd some chip sets only support one raid array (volume). so either all drives are individual, or are in the array. I must have 2 sperate raid arrays independent of each other, and a 5th drive not in any array. Anybody know if this setup will work? Thanks, -Stewart

    Read the article

  • Ubuntu hangs on boot when NFS-mounting entries in /etc/fstab, but they mount cleanly otherwise

    - by lorin
    I'm managing several Ubuntu 9.10 servers that NFS mount several folders (including /home). I'd like these folders to be mounted at boot time. I would like to have several entries in my /etc/fstab to accomplish this, e.g. 192.168.1.100:/home /home nfs rw 0 0 192.168.1.100:/usr/ansys_inc /ansys_inc nfs ro 0 0 Unfortunately, with this configuration, the servers usually (although not always) hang during the bootup sequence when trying to do the NFS mount. if I comment out these fstab entries, reboot the machine, uncomment them and mount them manually using the shell, the folders mount cleanly. I'm not sure how to go about debugging this problem. It seems like it has something to do with the boot sequence, that some relevant process hasn't been started by the time the OS tries to mount the folders.

    Read the article

  • How to Set Up a Hadoop Cluster Using Oracle Solaris (Hands-On Lab)

    - by Orgad Kimchi
    Oracle Technology Network (OTN) published the "How to Set Up a Hadoop Cluster Using Oracle Solaris" OOW 2013 Hands-On Lab. This hands-on lab presents exercises that demonstrate how to set up an Apache Hadoop cluster using Oracle Solaris 11 technologies such as Oracle Solaris Zones, ZFS, and network virtualization. Key topics include the Hadoop Distributed File System (HDFS) and the Hadoop MapReduce programming model. We will also cover the Hadoop installation process and the cluster building blocks: NameNode, a secondary NameNode, and DataNodes. In addition, you will see how you can combine the Oracle Solaris 11 technologies for better scalability and data security, and you will learn how to load data into the Hadoop cluster and run a MapReduce job. Summary of Lab Exercises This hands-on lab consists of 13 exercises covering various Oracle Solaris and Apache Hadoop technologies:     Install Hadoop.     Edit the Hadoop configuration files.     Configure the Network Time Protocol.     Create the virtual network interfaces (VNICs).     Create the NameNode and the secondary NameNode zones.     Set up the DataNode zones.     Configure the NameNode.     Set up SSH.     Format HDFS from the NameNode.     Start the Hadoop cluster.     Run a MapReduce job.     Secure data at rest using ZFS encryption.     Use Oracle Solaris DTrace for performance monitoring.  Read it now

    Read the article

  • How should I troubleshoot a problematic wireless connection on Linux?

    - by Gearoid Murphy
    I recently purchased a netgear 150 usb wireless dongle for use with my 11.10 Xubuntu amd64 system. Using the network-manager interface, I can see local wireless networks and enter the authentication details for my local wireless lan. Unfortunately, the connection does not seem to work, I keep getting notifications that my wireless has disconnected (but none indicating that I've connected). When I examine syslog, it seems to indicate that I've successfully associated with the wireless switch and that dhcp has successfully acquired an ip address but the log shows that the dhcp process keeps sending requests, eventually dropping the connection. 'ifconfig wlan0' never shows the dhcp address logged in syslog. I suspect that the problem lies with the usb dongle, my configuration or the wireless switch but I am not certain how to isolate the problem, can anyone provide some insight on how I should go about homing in on the cause of this problem or verifying the functionality of the individual components, thanks.

    Read the article

  • Trouble with mod_proxy and mongrel_rails

    - by x3ro
    Hey there I'm trying to set up a mod_proxy - mongrel combination, but somehow, apache/mod_proxy is unable to access mongrel locally. The following is my configuration for mod_proxy: ProxyRequests Off ProxyPreserveHost On <Location / ProxyPass http://localhost:3000/ ProxyPassReverse http://localhost:3000/ Order deny,allow Allow from all </Location Mongrel/Rails ist running just fine, because I can access it from my browser, and even with lynx on the server. However, I get the following error when trying to use the proxy: [error] [client 127.0.0.1] Invalid Content-Length I would appreciate any help :D PS: Oh, and the server is running Plesk to configure vhosts, if thats important.

    Read the article

  • Cisco redundancy modes

    - by user974896
    I am using a Cisco 6500 series with an SSO redundancy configuration. The show redundancy output is as follows: Hardware Mode = Duplex Configured Redundancy Mode = sso Operating Redundancy Mode = rpr Maintenance Mode = Disabled Communications = Up I would assume the device is operating in RPR mode although SSO is configured. What could cause this? Shouldn't the operating mode be SSO? EDIT (show redundancy states): my state = 13 -ACTIVE peer state = 4 -STANDBY COLD Mode = Duplex Unit = Primary Unit ID = 5 Redundancy Mode (Operational) = rpr Redundancy Mode (Configured) = sso Redundancy State = rpr Split Mode = Disabled Manual Swact = Enabled Communications = Up client count = 60 client_notification_TMR = 30000 milliseconds keep_alive TMR = 9000 milliseconds keep_alive count = 1 keep_alive threshold = 18 RF debug mask = 0x0

    Read the article

< Previous Page | 377 378 379 380 381 382 383 384 385 386 387 388  | Next Page >