Search Results

Search found 11396 results on 456 pages for 'simply denis'.

Page 383/456 | < Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >

• How to prepare for a programming competition? Graphs, Stacks, Trees, oh my! [closed]

  - by Simucal

  Last semester I attended ACM's (Association for Computing Machinery) bi-annual programming competition at a local University. My University sent 2 teams of 3 people and we competed amongst other schools in the mid-west. We got our butts kicked. You are given a packet with about 11 problems (1 problem per page) and you have 4 hours to solve as many as you can. They'll run your program you submit against a set of data and your output must match theirs exactly. In fact, the judging is automated for the most part. In any case.. I went there fairly confident in my programming skills and I left there feeling drained and weak. It was a terribly humbling experience. In 4 hours my team of 3 people completed only one of the problems. The top team completed 4 of them and took 1st place. The problems they asked were like no problems I have ever had to answer before. I later learned that in order to solve them some of them effectively you have to use graphs/graph algorithms, trees, stacks. Some of them were simply "greedy" algo's. My question is, how can I better prepare for this semesters programming competition so I don't leave there feeling like a complete moron? What tips do you have for me to be able to answer these problems that involve graphs, trees, various "well known" algorithms? How can I easily identify the algorithm we should implement for a given problem? I have yet to take Algorithm Design in school so I just feel a little out of my element. Here are some examples of the questions asked at the competitions: ACM Problem Sets Update: Just wanted to update this since the latest competition is over. My team placed 1st for our small region (about 6-7 universities with between 1-5 teams each school) and ~15th for the midwest! So, it is a marked improvement over last years performance for sure. We also had no graduate students on our team and after reviewing the rules we found out that many teams had several! So, that would be a pretty big advantage in my own opinion. Problems this semester ranged from about 1-2 "easy" problems (ie bit manipulation, string manipulation) to hard (graph problems involving fairly complex math and network flow problems). We were able to solve 4 problems in our 5 hours. Just wanted to thank everyone for the resources they provided here, we used them for our weekly team practices and it definitely helped! Some quick tips that I have that aren't suggested below: When you are seated at your computer before the competition starts, quickly type out various data structures that you might need that you won't have access to in your languages libraries. I typed out a Graph data-structure complete with floyd-warshall and dijkstra's algorithm before the competition began. We ended up using it in our 2nd problem that we solved and this is the main reason why we solved this problem before anyone else in the midwest. We had it ready to go from the beginning. Similarly, type out the code to read in a file since this will be required for every problem. Save this answer "template" someplace so you can quickly copy/paste it to your IDE at the beginning of each problem. There are no rules on programming anything before the competition starts so get any boilerplate code out the way. We found it useful to have one person who is on permanent whiteboard duty. This is usually the person who is best at math and at working out solutions to get a head start on future problems you will be doing. One person is on permanent programming duty. Your fastest/most skilled "programmer" (most familiar with the language). This will save debugging time also. The last person has several roles between assessing the packet of problems for the next "easiest" problem, helping the person on the whiteboard work out solutions and helping the person programming work out bugs/issues. This person needs to be flexible and be able to switch between roles easily.

  Read the article

• Making the most of next weeks SharePoint 2010 developer training

  - by Eric Nelson

  [you can still register if you are free on the afternoons of 9th to 11th – UK time] We have 50+ registrations with more coming in – which is fantastic. Please read on to make the most of the training. Background We have structured the training to make sure that you can still learn lots during the three days even if you do not have SharePoint 2010 installed. Additionally the course is based around a subset of the channel 9 training to allow you to easily dig deeper or look again at specific areas. Which means if you have zero time between now and next Wednesday then you are still good to go. But if you can do some pre-work you will likely get even more out of the three days. Step 1: Check out the topics and resources available on-demand The course is based around a subset of the channel 9 training to allow you to easily dig deeper or look again at specific areas. Take a lap around the SharePoint 2010 Training Course on Channel 9 Download the SharePoint Developer Training Kit Step 2: Use a pre-configured Virtual Machine which you can download (best start today – it is large!) Consider using the VM we created If you don't have access to SharePoint 2010. You will need a 64bit host OS and bare minimum of 4GB of RAM. 8GB recommended. Virtual PC can not be used with this VM – Virtual PC only supports 32bit guests. The 2010-7a Information Worker VM gives you everything you need to develop for SharePoint 2010. Watch the Video on how to use this VM Download the VM Remember you only need to download the “parts” for the 2010-7a VM. There are 3 subtly different ways of using this VM: Easiest is to follow the advice of the video and get yourself a host OS of Windows Server 2008 R2 with Hyper-V and simply use the VM Alternatively you can take the VHD and create a “Boot to VHD” if you have Windows 7 Ultimate or Enterprise Edition. This works really well – especially if you are already familiar with “Boot to VHD” (This post I did will help you get started) Or you can take the VHD and use an alternative VM tool such as VirtualBox if you have a different host OS. NB: This tends to involve some work to get everything running fine. Check out parts 1 to 3 from Rolly and if you go with Virtual Box use an IDE controller not SATA. SATA will blue screen. Note in the screenshot below I also converted the vhd to a vmdk. I used the FREE Starwind Converter to do this whilst I was fighting blue screens – not sure its necessary as VirtualBox does now work with VHDs. or Step 3 – Install SharePoint 2010 on a 64bit Windows 7 or Vista Host I haven’t tried this but it is now supported. Check out MSDN. Final notes: I am in the process of securing a number of hosted VMs for ISVs directly managed by my team. Your Architect Evangelist will have details once I have them! Else we can sort out on the Wed. Regrettably I am unable to give folks 1:1 support on any issues around Boot to VHD, 3rd party VM products etc. Related Links: Check you are fully plugged into the work of my team – have you done these simple steps including joining our new LinkedIn group?

  Read the article

• Talking JavaOne with Rock Star Kirk Pepperdine

  - by Janice J. Heiss

  Kirk Pepperdine is not only a JavaOne Rock Star but a Java Champion and a highly regarded expert in Java performance tuning who works as a consultant, educator, and author. He is the principal consultant at Kodewerk Ltd. He speaks frequently at conferences and co-authored the Ant Developer's Handbook. In the rapidly shifting world of information technology, Pepperdine, as much as anyone, keeps up with what's happening with Java performance tuning. Pepperdine will participate in the following sessions: CON5405 - Are Your Garbage Collection Logs Speaking to You? BOF6540 - Java Champions and JUG Leaders Meet Oracle Executives (with Jeff Genender, Mattias Karlsson, Henrik Stahl, Georges Saab) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Ellen Kraffmiller Martijn Verburg, Jeff Genender, and Henri Tremblay) I asked him what technological changes need to be taken into account in performance tuning. “The volume of data we're dealing with just seems to be getting bigger and bigger all the time,” observed Pepperdine. “A couple of years ago you'd never think of needing a heap that was 64g, but today there are deployments where the heap has grown to 256g and tomorrow there are plans for heaps that are even larger. Dealing with all that data simply requires more horse power and some very specialized techniques. In some cases, teams are trying to push hardware to the breaking point. Under those conditions, you need to be very clever just to get things to work -- let alone to get them to be fast. We are very quickly moving from a world where everything happens in a transaction to one where if you were to even consider using a transaction, you've lost." When asked about the greatest misconceptions about performance tuning that he currently encounters, he said, “If you have a performance problem, you should start looking at code at the very least and for that extra step, whip out an execution profiler. I'm not going to say that I never use execution profilers or look at code. What I will say is that execution profilers are effective for a small subset of performance problems and code is literally the last thing you should look at.And what is the most exciting thing happening in the world of Java today? “Interesting question because so many people would say that nothing exciting is happening in Java. Some might be disappointed that a few features have slipped in terms of scheduling. But I'd disagree with the first group and I'm not so concerned about the slippage because I still see a lot of exciting things happening. First, lambda will finally be with us and with lambda will come better ways.” For JavaOne, he is proctoring for Heinz Kabutz's lab. “I'm actually looking forward to that more than I am to my own talk,” he remarked. “Heinz will be the third non-Sun/Oracle employee to present a lab and the first since Oracle began hosting JavaOne. He's got a great message. He's spent a ton of time making sure things are going to work, and we've got a great team of proctors to help out. After that, getting my talk done, the Java Champion's panel session and then kicking back and just meeting up and talking to some Java heads."Finally, what should Java developers know that they currently do not know? “’Write Once, Run Everywhere’ is a great slogan and Java has come closer to that dream than any other technology stack that I've used. That said, different hardware bits work differently and as hard as we try, the JVM can't hide all the differences. Plus, if we are to get good performance we need to work with our hardware and not against it. All this implies that Java developers need to know more about the hardware they are deploying to.” Originally published on blogs.oracle.com/javaone.

  Read the article

• Subterranean IL: Compiling C# exception handlers

  - by Simon Cooper

  An exception handler in C# combines the IL catch and finally exception handling clauses into a single try statement: try { Console.WriteLine("Try block") // ... } catch (IOException) { Console.WriteLine("IOException catch") // ... } catch (Exception e) { Console.WriteLine("Exception catch") // ... } finally { Console.WriteLine("Finally block") // ... } How does this get compiled into IL? Initial implementation If you remember from my earlier post, finally clauses must be specified with their own .try clause. So, for the initial implementation, we take the try/catch/finally, and simply split it up into two .try clauses (I have to use label syntax for this): StartTry: ldstr "Try block" call void [mscorlib]System.Console::WriteLine(string) // ... leave.s End EndTry: StartIOECatch: ldstr "IOException catch" call void [mscorlib]System.Console::WriteLine(string) // ... leave.s End EndIOECatch: StartECatch: ldstr "Exception catch" call void [mscorlib]System.Console::WriteLine(string) // ... leave.s End EndECatch: StartFinally: ldstr "Finally block" call void [mscorlib]System.Console::WriteLine(string) // ... endfinally EndFinally: End: // ... .try StartTry to EndTry catch [mscorlib]System.IO.IOException handler StartIOECatch to EndIOECatch catch [mscorlib]System.Exception handler StartECatch to EndECatch .try StartTry to EndTry finally handler StartFinally to EndFinally However, the resulting program isn't verifiable, and doesn't run: [IL]: Error: Shared try has finally or fault handler. Nested try blocks What's with the verification error? Well, it's a condition of IL verification that all exception handling regions (try, catch, filter, finally, fault) of a single .try clause have to be completely contained within any outer exception region, and they can't overlap with any other exception handling clause. In other words, IL exception handling clauses must to be representable in the scoped syntax, and in this example, we're overlapping catch and finally clauses. Not only is this example not verifiable, it isn't semantically correct. The finally handler is specified round the .try. What happens if you were able to run this code, and an exception was thrown? Program execution enters top of try block, and exception is thrown within it CLR searches for an exception handler, finds catch Because control flow is leaving .try, finally block is run The catch block is run leave.s End inside the catch handler branches to End label. We're actually running the finally before the catch! What we do about it What we actually need to do is put the catch clauses inside the finally clause, as this will ensure the finally gets executed at the correct time (this time using scoped syntax): .try { .try { ldstr "Try block" call void [mscorlib]System.Console::WriteLine(string) // ... leave.s End } catch [mscorlib]System.IO.IOException { ldstr "IOException catch" call void [mscorlib]System.Console::WriteLine(string) // ... leave.s End } catch [mscorlib]System.Exception { ldstr "Exception catch" call void [mscorlib]System.Console::WriteLine(string) // ... leave.s End } } finally { ldstr "Finally block" call void [mscorlib]System.Console::WriteLine(string) // ... endfinally } End: ret Returning from methods There is a further semantic mismatch that the C# compiler has to deal with; in C#, you are allowed to return from within an exception handling block: public int HandleMethod() { try { // ... return 0; } catch (Exception) { // ... return -1; } } However, you can't ret inside an exception handling block in IL. So the C# compiler does a leave.s to a ret outside the exception handling area, loading/storing any return value to a local variable along the way (as leave.s clears the stack): .method public instance int32 HandleMethod() { .locals init ( int32 retVal ) .try { // ... ldc.i4.0 stloc.0 leave.s End } catch [mscorlib]System.Exception { // ... ldc.i4.m1 stloc.0 leave.s End } End: ldloc.0 ret } Conclusion As you can see, the C# compiler has quite a few hoops to jump through to translate C# code into semantically-correct IL, and hides the numerous conditions on IL exception handling blocks from the C# programmer. Next up: catch-all blocks, and how the runtime deals with non-Exception exceptions.

  Read the article

• Multitenant Design for SQL Azure: White Paper Available

  - by Herve Roggero

  Cloud computing is about scaling out all your application tiers, from web application to the database layer. In fact, the whole promise of Azure is to pay for just what you need. You need more IIS servers? No problemo... just spin another web server. You expect to double your storage needs for Azure Tables? No problemo; you are covered there too... just pay for your storage needs. But what about the database tier, SQL Azure? How do you add new databases easily, and transparently, so that your application simply uses more of SQL Azure if its needs to? Without changing a single line of code? And what if you need to scale back down? Welcome to the world of database scalability. There are many terms that describe database scalability, including data federation, multitenant designs, and even NoSQL depending on the technical solution you are implementing.  Because SQL Azure is a transactional database system, NoSQL is not really an option. However data federation and multitenant designs offer some very interesting scalability options that are worth considering. Data federation, a feature of SQL Azure that will be offered in the future, offers very interesting capabilities available natively on the SQL Azure platform. More to come in a few weeks... Multitenant designs on the other hand are design practices and technologies designed to help you reach flexible scalability options not available otherwise. The first incarnation of such a method was made available on CodePlex as an open source project (http://enzosqlshard.codeplex.com).  This project was an attempt to provide a sharding library for educational purposes.  All that sounds really cool... and really esoteric... almost a form of database "voodoo"... However after being on multiple Azure projects I am starting to see a real need. Customers want to be able to free themselves from the database tier, so that if they have 10 new customers tomorrow, all they need to do is add 2 more SQL Azure instances. It's that simple. How you achieve this, and suggested application design guidelines, are available in a white paper I just published.  The white paper offers two primary sections. The first section describes the business and technical problem at hand, and how to classify it according to specific design patterns. For example, I discuss compressed shards through schema separation. The second section offers a method for addressing the needs of a multitenant design using a new library, the big bother of the codeplex project mentioned previously (that I created earlier this year), complete with management interface and such. A Beta of this platform will be made available within weeks; as soon as the documentation will be ready.   I would like to ask you to drop me a quick email at [email protected] if you are going to download the white paper. It's not required, but it would help me get in touch with you for feedback.  You can download this white paper here:   http://www.bluesyntax.net/files/EnzoFramework.pdf . Thank you, and I am looking for feedback, thoughts and implementation opportunities.

  Read the article

• Problem with Assimp 3D model loader

  - by Brendan Webster

  In my game I have model loading functions for Assimp model loading library. I can load the model and render it, but the model displays incorrectly. The models load in as if they were using a seperate projection matrix. I have looked over my code over and over again, but I probably keep on missing the obvious reason why this is happening. Here is an image of my game: It's simply a 6 sided cube, but it's off big time! Here are my code snippets for rendering the cube to the screen: void C_MediaLoader::display(void) { float tmp; glTranslatef(0,0,0); // rotate it around the y axis glRotatef(angle,0.f,0.f,1.f); glColor4f(1,1,1,1); // scale the whole asset to fit into our view frustum tmp = scene_max.x-scene_min.x; tmp = aisgl_max(scene_max.y - scene_min.y,tmp); tmp = aisgl_max(scene_max.z - scene_min.z,tmp); tmp = (1.f / tmp); glScalef(tmp/5, tmp/5, tmp/5); // center the model //glTranslatef( -scene_center.x, -scene_center.y, -scene_center.z ); // if the display list has not been made yet, create a new one and // fill it with scene contents if(scene_list == 0) { scene_list = glGenLists(1); glNewList(scene_list, GL_COMPILE); // now begin at the root node of the imported data and traverse // the scenegraph by multiplying subsequent local transforms // together on GL's matrix stack. recursive_render(scene, scene->mRootNode); glEndList(); } glCallList(scene_list); } void C_MediaLoader::recursive_render (const struct aiScene *sc, const struct aiNode* nd) { unsigned int i; unsigned int n = 0, t; struct aiMatrix4x4 m = nd->mTransformation; // update transform aiTransposeMatrix4(&m); glPushMatrix(); glMultMatrixf((float*)&m); // draw all meshes assigned to this node for (; n < nd->mNumMeshes; ++n) { const struct aiMesh* mesh = scene->mMeshes[nd->mMeshes[n]]; apply_material(sc->mMaterials[mesh->mMaterialIndex]); if(mesh->mNormals == NULL) { glDisable(GL_LIGHTING); } else { glEnable(GL_LIGHTING); } for (t = 0; t < mesh->mNumFaces; ++t) { const struct aiFace* face = &mesh->mFaces[t]; GLenum face_mode; switch(face->mNumIndices) { case 1: face_mode = GL_POINTS; break; case 2: face_mode = GL_LINES; break; case 3: face_mode = GL_TRIANGLES; break; default: face_mode = GL_POLYGON; break; } glBegin(face_mode); for(i = 0; i < face->mNumIndices; i++) { int index = face->mIndices[i]; if(mesh->mColors[0] != NULL) glColor4fv((GLfloat*)&mesh->mColors[0][index]); if(mesh->mNormals != NULL) glNormal3fv(&mesh->mNormals[index].x); glVertex3fv(&mesh->mVertices[index].x); } glEnd(); } } // draw all children for (n = 0; n < nd->mNumChildren; ++n) { recursive_render(sc, nd->mChildren[n]); } glPopMatrix(); } Sorry there is so much code to look through, but I really cannot find the problem, and I would love to have help.

  Read the article

• New Working Environment Starting November

  - by Jenson

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 This is actually a post dated update. After I’ve been working in the private sectors for so many years (the 2 years when I was working as IT trainer in a secondary school is not counted, as I was working under a contract with a private IT training agency), I’ve decided to try my luck into public sector. And fortunately, I passed the interview and I was offered a position of Web Administrator in a government statutory board, that’s Agency for Science, Technology and Research (of Singapore). During my previous employment with a Japanese MNC (multinational company), it was a totally new environment for me, as I had never worked for a Japanese company before, but the first time I work for Japanese company also gave me the very first nightmare I have with them, and vowed not to work for them anymore, and any other Japanese companies. No doubt I have freedom of choosing the tools and methods I wish to use for the projects, but the project management is simply too messy and out of order. And a lot of time, I don’t find that everyone is working as a team, more like achieving their own goals. Accountability for project is not shared, all lumped onto the shoulders of the developer in charge (they called it Software Engineer). I was working on a windows based .NET project, which I already voiced out that it’s not manageable by just 1 software engineer, but it seems like nobody cares, even the one who propose the solution to customer doesn’t care much. What he cares is whether you deliver the project on time so that he can please his customer and the senior management of his good work. Too many stories to tell, and I just simple doesn’t want to talk too much on this as it has already became the past to me. With my new title with the government agency, I hope to contribute my best to them, while learning as much as I can. I will share whatever I can on technologies, methodologies, and etc whichever I’m allowed and permitted to (of course, for those non-work-related stuff, I would be glad to share with you without much hesitation). Thank you! /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Use your iPhone or iPod Touch as a Boxee Remote

  - by DigitalGeekery

  Are you a Boxee user looking for a remote control solution? Well, you might not need to look any further than your pocket. The free Boxee Remote App turns your iPhone or iPod Touch into a a simple and easy-to-use Boxee remote. The Boxee Remote App works over WiFi, so there is no need for to buy or install additional hardware on your PC. Plus, you don’t even need to be within the line of sight for it to work. Using the Boxee Remote App Download the free Boxee Remote App from the App Store and install it on your iPhone or iPod Touch. See download link below. Next, make sure you have Boxee running on your PC. Select the Boxee icon to open the App.   The first time you log in you’ll be greeted by an introduction screen that will explain the two modes. Click Continue. When opened in “Button” mode, you’ll be presented with 4 directional buttons, an “OK” button, and a back arrow button that works like the Esc key does in Boxee. Button mode performs just as a normal remote. Touching the directional buttons moves your on screen selection right, left, up, and down. Tap the OK button to open or select an item. To enter “Gesture” mode, tap the Gesture button along the top of the Screen. Gesture mode works similar to a touch pad or trackball on a laptop. You drag the Boxee icon with your thumb or finger across the screen to move around within Boxee. The icon will turn red while being dragged or touched. Simply tap the icon to select.   The Settings button allows you to manually add or delete a host computer, or adjust the sensitivity of the controls.     If you need to enter text, such as enter logon credentials for an App, the on screen keyboard will pop up. While watching a video you’ll have on-screen Stop and Pause buttons along with a volume slider.   The Boxee Remote App is simple and easy to use. As long as you can connect via WiFi, you can use it to control any instance of Boxee running on any computer on your network. Download the Boxee Remote App Similar Articles Productive Geek Tips Why Wait? Amazing New Add-on Turns Your iPhone into an iPad! [Comic]Getting Started with BoxeeIntegrate Boxee with Media Center in Windows 7Watch Netflix Instant Movies in BoxeeWin a Free iPod Touch in the How-To Geek Facebook Giveaway! TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) If it were only this easy Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook

  Read the article

• How can I draw an arrow at the edge of the screen pointing to an object that is off screen?

  - by Adam Henderson

  I am wishing to do what is described in this topic: http://www.allegro.cc/forums/print-thread/283220 I have attempted a variety of the methods mentioned here. First I tried to use the method described by Carrus85: Just take the ratio of the two triangle hypontenuses (doesn't matter which triagle you use for the other, I suggest point 1 and point 2 as the distance you calculate). This will give you the aspect ratio percentage of the triangle in the corner from the larger triangle. Then you simply multiply deltax by that value to get the x-coordinate offset, and deltay by that value to get the y-coordinate offset. But I could not find a way to calculate how far the object is away from the edge of the screen. I then tried using ray casting (which I have never done before) suggested by 23yrold3yrold: Fire a ray from the center of the screen to the offscreen object. Calculate where on the rectangle the ray intersects. There's your coordinates. I first calculated the hypotenuse of the triangle formed by the difference in x and y positions of the two points. I used this to create a unit vector along that line. I looped through that vector until either the x coordinate or the y coordinate was off the screen. The two current x and y values then form the x and y of the arrow. Here is the code for my ray casting method (written in C++ and Allegro 5) void renderArrows(Object* i) { float x1 = i->getX() + (i->getWidth() / 2); float y1 = i->getY() + (i->getHeight() / 2); float x2 = screenCentreX; float y2 = ScreenCentreY; float dx = x2 - x1; float dy = y2 - y1; float hypotSquared = (dx * dx) + (dy * dy); float hypot = sqrt(hypotSquared); float unitX = dx / hypot; float unitY = dy / hypot; float rayX = x2 - view->getViewportX(); float rayY = y2 - view->getViewportY(); float arrowX = 0; float arrowY = 0; bool posFound = false; while(posFound == false) { rayX += unitX; rayY += unitY; if(rayX <= 0 || rayX >= screenWidth || rayY <= 0 || rayY >= screenHeight) { arrowX = rayX; arrowY = rayY; posFound = true; } } al_draw_bitmap(sprite, arrowX - spriteWidth, arrowY - spriteHeight, 0); } This was relatively successful. Arrows are displayed in the bottom right section of the screen when objects are located above and left of the screen as if the locations of the where the arrows are drawn have been rotated 180 degrees around the center of the screen. I assumed this was due to the fact that when I was calculating the hypotenuse of the triangle, it would always be positive regardless of whether or not the difference in x or difference in y is negative. Thinking about it, ray casting does not seem like a good way of solving the problem (due to the fact that it involves using sqrt() and a large for loop). Any help finding a suitable solution would be greatly appreciated, Thanks Adam

  Read the article

• Java EE @ No Fluff Just Stuff Tour

  - by reza_rahman

  If you work in the US and still don't know what the No Fluff Just Stuff (NFJS) Tour is, you are doing yourself a very serious disfavor. NFJS is by far the cheapest and most effective way to stay up to date through some world class speakers and talks. This is most certainly true for US enterprise Java developers in particular. Following the US cultural tradition of old-fashioned roadshows, NFJS is basically a set program of speakers and topics offered at major US cities year round. Many now famous world class technology speakers can trace their humble roots to NFJS. Via NFJS you basically get to have amazing training without paying for an expensive venue, lodging or travel. The events are usually on the weekends so you don't need to even skip work if you want (a great feature for consultants on tight budgets and deadlines). I am proud to share with you that I recently joined the NFJS troupe. My hope is that this will help solve the lingering problem of effectively spreading the Java EE message here in the US. For NFJS I hope my joining will help beef up perhaps much desired Java content. In any case, simply being accepted into this legendary program is an honor I could have perhaps only dreamed of a few years ago. I am very grateful to Jay Zimmerman for seeing the value in me and the Java EE content. The current speaker line-up consists of the likes of Neal Ford, Venkat Subramaniam, Nathaniel Schutta, Tim Berglund and many other great speakers. I actually had my tour debut on April 4-5 with the NFJS New York Software Symposium - basically a short train commute away from my home office. The show is traditionally one of the smaller ones and it was not that bad for a start. I look forward to doing a few more in the coming months (more on that a bit later). I had four talks back to back (really my most favorite four at the moment). The first one was a talk on JMS 2 - some of you might already know JMS is one of my most favored Java EE APIs. The slides for the talk are posted below: What’s New in Java Message Service 2 from Reza Rahman The next talk I delivered was my Cargo Tracker/Java EE + DDD talk. This talk basically overviews DDD and describes how DDD maps to Java EE using code examples/demos from the Cargo Tracker Java EE Blue Prints project. Applied Domain-Driven Design Blue Prints for Java EE from Reza Rahman The third talk I delivered was our flagship Java EE 7/8 talk. As you may know, currently the talk is basically about Java EE 7. I'll probably slowly evolve this talk to gradually transform it into a Java EE 8 talk as we move forward (I'll blog about that separately shortly). The following is the slide deck for the talk: JavaEE.Next(): Java EE 7, 8, and Beyond from Reza Rahman My last talk for the show was my JavaScript+Java EE 7 talk. This talk is basically about aligning EE 7 with the emerging JavaScript ecosystem (specifically AngularJS). The slide deck for the talk is here: JavaScript/HTML5 Rich Clients Using Java EE 7 from Reza Rahman Unsurprisingly this talk was well-attended. The demo application code is posted on GitHub. The code should be a helpful resource if this development model is something that interests you. Do let me know if you need help with it but the instructions should be fairly self-explanatory. My next NFJS show is the Central Ohio Software Symposium in Columbus on June 6-8 (sorry for the late notice - it's been a really crazy few weeks). Here's my tour schedule so far, I'll keep you up-to-date as the tour goes forward: June 6 - 8, Columbus Ohio. June 24 - 27, Denver Colorado (UberConf) - my most extensive agenda on the tour so far. July 18 - 20, Austin Texas. I hope you'll take this opportunity to get some updates on Java EE as well as the other awesome content on the tour?

  Read the article

• Launching Ops Center 12c

  - by user12601629

  Oracle Enterprise Manager Ops Center 12c is most ambitious version of the Ops Center tooling that we've ever released. I think that make it appropriate that we launched it in grand style! When it became clear we were going to be complete with the 12c final release about this time of year, the marketing team proposed that we roll the launch of 12c into Oracle OpenWorld Tokyo.  I thought that sounded like a fine idea!  You see, I have always loved Japan.  I even studied a bit of Japanese language back in school. OpenWorld Tokyo was an outstanding even this year.  It was held in Roppongi, one of the most stylish districts in Tokyo. And, to make things even better, the Sakura (cherry blossoms) were blooming.  If you've never been in Japan for cherry blossom season, it's a must see!  Here are a couple of pics for you. Here is a picture from Roppongi, near the conference.  Here's a picture near the Imperial Palace.  A couple of friends from the local sales team took me here before my flight out. So, now back to the product launch! We choose to launch the product in John Fowler's "Engineered Systems" keynote address.  It made perfect sense because of the close ties of Ops Center to the Systems portfolio of products.  It was a packed house for the keynote.  Here's a picture I took just before we started -- there were also hundreds more people in "overflow" rooms in other parts of the venue. Here's a picture of me on stage during the launch. While there are countless new features in Ops Center 12c that customers will love, I had to limit myself to discussing just three. Mission Critical Clouds Solaris 11 Engineered Systems So, what does Mission Critical Cloud mean?  It means we've expanded EM's cloud capabilities in a couple of key areas. First, we've expanded the "self service provisioning" capabilities we have to include SPARC -- not just x86.  Now you can build clouds of Solaris Zones with ease!  Second, we've much more deeply integrated high-end storage and network management into the cloud layers.  These may our IaaS story is now much more powerful! For Solaris 11, we didn't simply port our monitoring agent to S11.  That would have been easy, but also boring! We support S11 deeply.  Full access to the power of the IPS packaging system, the new virtualized networking stack, new Zones features, the Auto Install framework.  If you're ready to try Solaris 11 then Ops Center is ready for you. Last is on the area of Engineered Systems.  These combinations of hardware and software are fast and powerful. However, we're also on a mission to make them ever easier to manage.  We've made major strides with Ops Center 12c. Manage these systems as racks, not individual components.  The new capabilities for the new engineered systems like Exalogic and SPARC SuperCluster and striking. You can read more here: Oracle Unveils Oracle Enterprise Manager Ops Center 12c So, I'll wrap this up with one final bit of fun. One of my friends from the Oracle marketing department found a super cool place to get dinner.  It's a restaurant called Gonpachi. It turns out this is the place that inspired the scene in the Quentin Taratino movie Kill Bill where Uma Thurman fights 88 Ninjas.  Here is a picture I snapped while we were there. It was surely a good time. Check it out next time you're in Tokyo.

  Read the article

• How does the Trash Can work, and where can I find official documentation, reference, or specification for it?

  - by MestreLion

  When trying to manage trash can from mounted NTFS volumes, I ended up reading FreeDesktop.org's reference on it. Poking around and doing some tests, I realized Ubuntu/Gnome does not follow the specs 100%. Here's why: For non-/ partitions, it always uses <driveroot>/.Trash-<uid>, It never used <driveroot>/.Trash/<uid>, even when i created it in advance. While this works, it's annoying: if I have 15 users, I end up with 15 /.Trash-xxx folders in my drive, while the other approach would still give a single folder (with 15 sub-folders). That "pollution" in my drives is very unpleasant. And specs say "If an $topdir/.Trash directory is absent, an $topdir/.Trash-$uid directory is to be used". Well, it IS present, so why does it never use it? root trash does not work, at least not out of the box. Open nautilus as root and click on trash; it gives an error. Try to delete any file, it says "it can't move to trash". Ok, I know this can be fixed by creating /root/.local/share. But specs says "A “home trash” directory SHOULD be automatically created for any new user. If this directory is needed for a trashing operation but does not exist, the implementation SHOULD automatically create it, without any warnings or delays.". Why the error then? Bug? Why must I change /etc/fstab entries for mounted volumes, adding options like uid and guid, if the volumes are already mounted as RW for everyone? These are just some examples of deviation from the standard. So, the question is: "If Ubuntu does not adhere 100% to the spec, HOW exactly does the trash work? WHERE can i find a technical reference for Ubuntu's implementation of the trash?" By the way: if Ubuntu does happen to follow specs, please tell me what I am doing wrong, especially regarding the /.Trash-<uid> vs /.Trash/<uid> issue. Thanks! EDIT: Some more info: If a given fs has no support for the sticky bit (VFAT, NTFS), it probably doesn't have for permissions either (at least VFAT surely doesn't). So what prevents one user from purging / restoring other users' ./Trash-xxx ? If one can read/write his own Trash, one can do the same for the whole drive, including other's trashes, correct? Or does Gnome have some kind of "extra" protection on ./Trash-xxx folders on VFAT/NTFS fs? If Linux can "emulate" file permissions on NTFS mounting by editing /fstab uid and gid options, can it also "emulate" the sticky bit? I would really prefer to use /.Trash/xxx format... For the root issue: for the / partition, I can use trash as root, and it goes to /root/.local/shate/Trash. But if I click on Nautilus "Trash" (as root), I get an error. Don't you? So files are correctly trashed, but I can't access it. All I can do is manually "purge" them (by deleting files on /root/.local/shate/Trash), but restoring would be very tricky (opening info files and manually moving, etc.). For non-/ partitions (or at least for VFAT/NTFS), I can not even use trash as root: it does not create a ./Trash-0 folder, it simply says "Cannot trash, want to permanently delete?" Why? About fstab: i use it for a permanent mount for my NTFS partitions. I have several, and if not "pre-mounted" they really clutter the desktop and/or Nautilus. I'd rather have it pre-mounted, integrated in my fs, in mounts like /data , /windows/xp , /windows/vista , and so on, and leave /media and its "mount/unmount" flexibility just for truly removable drives. So, if Ubuntu/Gnome truly follows the spec, is there any way to fix the root issues and to "emulate" the sticky bit for (at least) my fstab'ed NTFS fixed partitions?

  Read the article

• How does Trash Can works? Where can i find official specification / documentation / reference about it?

  - by MestreLion

  When trying to manage trash can from mounted NTFS volumes, I ended up reading FreeDesktop.org's reference on it. Poking around and doing some tests, I realized Ubuntu/Gnome does not follow the specs 100%. Here's why: For non-/ partitions, it always use <driveroot>/.Trash-<uid>, It never used <driveroot>/.Trash/<uid>, even when i created it in advance. While this works, its annoying: if i have 15 users, i end up with 15 /.Trash-xxx folders in my drive, while the other approach would still give a single folder (with 15 sub-folders). That "pollution" in my drives is very unpleasant. And specs say "If an $topdir/.Trash directory is absent, an $topdir/.Trash-$uid directory is to be used". Well, it IS present, so why it never uses it? root trash does not work, at least not out of the box. Open nautilus as root and click on trash, it gives error. Try to delete any file, it says "it cant move to trash". Ok, i know this can be fixed by creating /root/.local/share. But specs says "A “home trash” directory SHOULD be automatically created for any new user. If this directory is needed for a trashing operation but does not exist, the implementation SHOULD automatically create it, without any warnings or delays.". Why error then? Bug? Why do i must change /etc/fstab entries for mounted volumes, adding options like uid and guid, if the volumes are already mounted as RW for everyone? These are just some examples of deviation from standard. So, the question is: "If Ubuntu does not adhere 100% to the spec, HOW exactly does the trash work? WHERE can i find technical reference about Ubuntu's implementation of the trash?" By the way: if Ubuntu does happen to follow specs, please tell me what am i doing wrong, specially regarding the /.Trash-<uid> vs /.Trash/<uid> issue. Thanks! EDIT: Some more info: If a given fs has no support for sticky bit (VFAT, NTFS), it probably dont have for permitions either (at least VFAT surely doesnt). So what prevents one user for purging / restoring other users ./Trash-xxx ? If one can read/write his own Trash, he can also do the same for the whole drive, including other's trashes, isnt it? Or does Gnome has any "extra" protection on ./Trash-xxx folders on VFAT/NTFS fs? If Linux can "emulate" file permitions on NTFS mounting by editing /fstab uid and gid options, can it also "emulate" the sticky bit? I would really want to use /.Trash/xxx format... For the root issue: for the / partition, i can trash as root, and it goes to /root/.local/shate/Trash. But if i click on Nautilus "Trash" (as root), i get an error. Dont you? So files are correctly trashed, but i cant access it. All i can do is manually "purge" them (by deleting files on /root/.local/shate/Trash), but restoring would be very tricky (opening info files and manually moving, etc) For non-/ partitions (or at least for VFAT/NTFS), I can not even trash as root: it does not create a ./Trash-0 folder, it simply says "Cannot trash, want to permantly delete?" Why? About fstab: i use it for a permanent mount for my NTFS partitions. I have several, and if not "pre-mounted" they really cluttter desktop and/or Nautilus. Id rather have it pre mounted, integrated in my fs, in mounts like /data , /windows/xp , /windows/vista , and so on, and leave /media and its "mount/unmount" flexibility just for truly removable drives Si, if Ubuntu/Gnome truly follow the spec, is there any way to fix the root issues and to "emulate" the sticky bit for (at least) my fstab'ed NTFS fixed partitions?

  Read the article

• Is a university education really worth it for a good programmer?

  - by Jon Purdy

  The title says it all, but here's the personal side of it: I've been doing design and programming for about as long as I can remember. If there's a programming problem, I can figure it out. (Though admittedly StackOverflow has allowed me to skip the figuring out and get straight to the doing in many instances.) I've made games, esoteric programming languages, and widgets and gizmos galore. I'm currently working on a general-purpose programming language. There's nothing I do better than programming. However, I'm just as passionate about design. Thus when I felt leaving high school that my design skills were lacking, I decided to attend university for New Media Design and Imaging, a digital design-related major. For a year, I diligently studied art and programmed in my free time. As the next year progressed, however, I was obligated to take fewer art and design classes and more technical classes. The trouble was of course that these classes were geared toward non-technical students, and were far beneath my skill level at the time. No amount of petitioning could overcome the institution's reluctance to allow me to test out of such classes, and the major offered no promise for any greater challenge in the future, so I took the extreme route: I switched into the technical equivalent of the major, New Media Interactive Development. A lot of my credits moved over into the new major, but many didn't. It would have been infeasible to switch to a more rigorous technical major such as Computer Science, and having tutored Computer Science students at every level here, I doubt I would be exposed to anything that I haven't already or won't eventually find out on my own, since I'm so involved in the field. I'm now on track to graduate perhaps a year later than I had planned, which puts a significant financial strain on my family and my future self. My schedule continues to be bogged down with classes that are wholly unnecessary for me to take. I'm being re-introduced to subjects that I've covered a thousand times over, simply because I've always been interested in it all. And though I succeed in avoiding the cynical and immature tactic of failing to complete work out of some undeserved sense of superiority, I'm becoming increasingly disillusioned by the lack of intellectual stimulation. Further, my school requires students to complete a number of quarters of co-op work experience proportional to their major. My original major required two quarters, but my current requires three, delaying my graduation even more. To top it all off, college is putting a severe strain on my relationship with my very close partner of a few years, so I've searched diligently for co-op jobs in my area, alas to no avail. I'm now in my third year, and approaching that point past which I can no longer handle this. Either I keep my head down, get a degree no matter what it takes, and try to get a job with a company that will pay me enough to do what I love that I can eventually pay off my loans; or I cut my losses now, move wherever there is work, and in six months start paying off what debt I've accumulated thus far. So the real question is: is a university education really more than just a formality? It's a big decision, and one I can't make lightly. I think this is the appropriate venue for this kind of question, and I hope it sticks around for the sake of others who might someday find themselves in similar situations. My heartfelt thanks for reading, and in advance for your help.

  Read the article

• SQL Constraints &ndash; CHECK and NOCHECK

  - by David Turner

  One performance issue i faced at a recent project was with the way that our constraints were being managed, we were using Subsonic as our ORM, and it has a useful tool for generating your ORM code called SubStage – once configured, you can regenerate your DAL code easily based on your database schema, and it can even be integrated into your build as a pre-build event if you want to do this.  SubStage also offers the useful feature of being able to generate DDL scripts for your entire database, and can script your data for you too. The problem came when we decided to use the generate scripts feature to migrate the database onto a test database instance – it turns out that the DDL scripts that it generates include the WITH NOCHECK option, so when we executed them on the test instance, and performed some testing, we found that performance wasn’t as expected. A constraint can be disabled, enabled but not trusted, or enabled and trusted.  When it is disabled, data can be inserted that violates the constraint because it is not being enforced, this is useful for bulk load scenarios where performance is important.  So what does it mean to say that a constraint is trusted or not trusted?  Well this refers to the SQL Server Query Optimizer, and whether it trusts that the constraint is valid.  If it trusts the constraint then it doesn’t check it is valid when executing a query, so the query can be executed much faster. Here is an example base in this article on TechNet, here we create two tables with a Foreign Key constraint between them, and add a single row to each.  We then query the tables: 1 DROP TABLE t2 2 DROP TABLE t1 3 GO 4 5 CREATE TABLE t1(col1 int NOT NULL PRIMARY KEY) 6 CREATE TABLE t2(col1 int NOT NULL) 7 8 ALTER TABLE t2 WITH CHECK ADD CONSTRAINT fk_t2_t1 FOREIGN KEY(col1) 9 REFERENCES t1(col1) 10 11 INSERT INTO t1 VALUES(1) 12 INSERT INTO t2 VALUES(1) 13 GO14 15 SELECT COUNT(*) FROM t2 16 WHERE EXISTS17 (SELECT *18 FROM t1 19 WHERE t1.col1 = t2.col1) This all works fine, and in this scenario the constraint is enabled and trusted.  We can verify this by executing the following SQL to query the ‘is_disabled’ and ‘is_not_trusted’ properties: 1 select name, is_disabled, is_not_trusted from sys.foreign_keys This gives the following result: We can disable the constraint using this SQL: 1 alter table t2 NOCHECK CONSTRAINT fk_t2_t1 And when we query the constraints again, we see that the constraint is disabled and not trusted: So the constraint won’t be enforced and we can insert data into the table t2 that doesn’t match the data in t1, but we don’t want to do this, so we can enable the constraint again using this SQL: 1 alter table t2 CHECK CONSTRAINT fk_t2_t1 But when we query the constraints again, we see that the constraint is enabled, but it is still not trusted: This means that the optimizer will check the constraint each time a query is executed over it, which will impact the performance of the query, and this is definitely not what we want, so we need to make the constraint trusted by the optimizer again.  First we should check that our constraints haven’t been violated, which we can do by running DBCC: 1 DBCC CHECKCONSTRAINTS (t2) Hopefully you see the following message indicating that DBCC completed without finding any violations of your constraint: Having verified that the constraint was not violated while it was disabled, we can simply execute the following SQL:   1 alter table t2 WITH CHECK CHECK CONSTRAINT fk_t2_t1 At first glance this looks like it must be a typo to have the keyword CHECK repeated twice in succession, but it is the correct syntax and when we query the constraints properties, we find that it is now trusted again: To fix our specific problem, we created a script that checked all constraints on our tables, using the following syntax: 1 ALTER TABLE t2 WITH CHECK CHECK CONSTRAINT ALL

  Read the article

• HOWTO Turn off SPARC T4 or Intel AES-NI crypto acceleration.

  - by darrenm

  Since we released hardware crypto acceleration for SPARC T4 and Intel AES-NI support we have had a common question come up: 'How do I test without the hardware crypto acceleration?'. Initially this came up just for development use so developers can do unit testing on a machine that has hardware offload but still cover the code paths for a machine that doesn't (our integration and release testing would run on all supported types of hardware anyway).  I've also seen it asked in a customer context too so that we can show that there is a performance gain from the hardware crypto acceleration, (not just the fact that SPARC T4 much faster performing processor than T3) and measure what it is for their application. With SPARC T2/T3 we could easily disable the hardware crypto offload by running 'cryptoadm disable provider=n2cp/0'.  We can't do that with SPARC T4 or with Intel AES-NI because in both of those classes of processor the encryption doesn't require a device driver instead it is unprivileged user land callable instructions. Turns out there is away to do this by using features of the Solaris runtime loader (ld.so.1). First I need to expose a little bit of implementation detail about how the Solaris Cryptographic Framework is implemented in Solaris 11.  One of the new Solaris 11 features of the linker/loader is the ability to have a single ELF object that has multiple different implementations of the same functions that are selected at runtime based on the capabilities of the machine.  The alternate to this is having the application coded to call getisax() and make the choice itself.  We use this functionality of the linker/loader when we build the userland libraries for the Solaris Cryptographic Framework (specifically libmd.so, and the unfortunately misnamed due to historical reasons libsoftcrypto.so) The Solaris linker/loader allows control of a lot of its functionality via environment variables, we can use that to control the version of the cryptographic functions we run.  To do this we simply export the LD_HWCAP environment variable with values that tell ld.so.1 to not select the HWCAP section matching certain features even if isainfo says they are present.  For SPARC T4 that would be: export LD_HWCAP="-aes -des -md5 -sha256 -sha512 -mont -mpul" and for Intel systems with AES-NI support: export LD_HWCAP="-aes" This will work for consumers of the Solaris Cryptographic Framework that use the Solaris PKCS#11 libraries or use libmd.so interfaces directly.  It also works for the Oracle DB and Java JCE.  However does not work for the default enabled OpenSSL "t4" or "aes-ni" engines (unfortunately) because they do explicit calls to getisax() themselves rather than using multiple ELF cap sections. However we can still use OpenSSL to demonstrate this by explicitly selecting "pkcs11" engine  using only a single process and thread.  $ openssl speed -engine pkcs11 -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 54170.81k 187416.00k 489725.70k 805445.63k 1018880.00k $ LD_HWCAP="-aes" openssl speed -engine pkcs11 -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 29376.37k 58328.13k 79031.55k 86738.26k 89191.77k We can clearly see the difference this makes in the case where AES offload to the SPARC T4 was disabled. The "t4" engine is faster than the pkcs11 one because there is less overhead (again on a SPARC T4-1 using only a single process/thread - using -multi you will get even bigger numbers). $ openssl speed -evp aes-128-cbc ... type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 85526.61k 89298.84k 91970.30k 92662.78k 92842.67k Yet another cool feature of the Solaris linker/loader, thanks Rod and Ali. Note these above openssl speed output is not intended to show the actual performance of any particular benchmark just that there is a significant improvement from using hardware acceleration on SPARC T4. For cryptographic performance benchmarks see the http://blogs.oracle.com/BestPerf/ postings.

  Read the article

• Converting a PV vm back into an HVM vm

  - by wim.coekaerts

  I have been doing some Oracle VM benchmark stuff in the last week or 2 in my off hours and yesterday I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel. It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps. A PV kernel uses pygrub and a paravirt kernel image that lives on the vm image virtual disk. since this disk image does not have to be bootable it doesn't contain a boot sector and if you just restart the VM in hvm mode the virtual bios will just not do much as it can't start the boot process from disk The first thing I do is make a backup of my vm.cfg file :-) and then edit it as follows : the original file contains : bootloader = '/usr/bin/pygrub' I replace that with : acpi = 1 apic = 1 builder = 'hvm' device_model = '/usr/lib/xen/bin/qemu-dm' kernel = '/usr/lib/xen/boot/hvmloader' then changing the disk files. I change my xvd disks to hd disks and I copy over the iso image of my instal lDVD. In the case of my VM template it was based on OL5U4 So I downloaded Enterprise-R5-U4-Server-x86_64-dvd.iso and added it as a cd device. disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,xvda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,xvdb,w', ] to disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,hda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,hdb,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Enterprise-R5-U4-Server-x86_64-dvd.iso, hdc:cdrom,r', ] boot='d' for the network devices (vifs) I change : vif = ['bridge=xenbr2,type=netfront'] to vif = ['bridge=xenbr2,type=ioemu'] That should do it. Next, inside the VM, I copy over the regular kernel rpm that I want to end up running in hvm mode. In this example case it was : kernel-2.6.18-164.0.0.0.1.el5.x8664.rpm. I will use that later on in the process. I put this kernel simply in /root At this point I just start the vm with xm create vm.cfg and start my vnc console to the vm console. Oracle Linux will boot from the iso image, I just go through the install steps and click on UPgrade existing (not re-install). Because the VM is the same as the ISO the install won't actually do anything and it will run through instantly. When the "Reboot" button pops up, don't reboot. Switch to the command prompt console. hi alt-f2 to go to the shell prompt. Now it's easy : umount /mnt/sysimage/boot cd /mnt/sysimage chroot . mount /dev/hda1 (if that was your /boot partition) export PATH=/sbin:$PATH (just to clean that up) edit /etc/modprobe.conf and comment out the xen modules (just put a # in front) Install grub. if your /boot is hda1 then that is (hd0,0) $ grub root (hd0,0) setup (hd0) exit grub now you have a good bootsector, grub installed and you have your grub.conf file Install the new kernel cd root (this is your old /root in your pv image) rpm -ivh remove (or comment out) boot='d' in your vm.cfg restart the VM and you should be good to go, regular grub should start and load your environment. Caveats : this assumes you used labels for your filesystems. if /etc/fstab were to have devices listed then you would have to rename these device before rebooting as well. If you had a /dev/xvda disk then this would be /dev/hda or /dev/sda. All in all it is a relatively short and simple process.

  Read the article

• Converting a PV vm back into an HVM vm

  - by wim.coekaerts

  I have been doing some Oracle VM benchmark stuff in the last week or 2 in my off hours and yesterday I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel. It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps. A PV kernel uses pygrub and a paravirt kernel image that lives on the vm image virtual disk. since this disk image does not have to be bootable it doesn't contain a boot sector and if you just restart the VM in hvm mode the virtual bios will just not do much as it can't start the boot process from disk The first thing I do is make a backup of my vm.cfg file :-) and then edit it as follows : the original file contains : bootloader = '/usr/bin/pygrub' I replace that with : acpi = 1 apic = 1 builder = 'hvm' device_model = '/usr/lib/xen/bin/qemu-dm' kernel = '/usr/lib/xen/boot/hvmloader' then changing the disk files. I change my xvd disks to hd disks and I copy over the iso image of my instal lDVD. In the case of my VM template it was based on OL5U4 So I downloaded Enterprise-R5-U4-Server-x86_64-dvd.iso and added it as a cd device. disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,xvda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,xvdb,w', ] to disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,hda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,hdb,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Enterprise-R5-U4-Server-x86_64-dvd.iso, hdc:cdrom,r', ] boot='d' for the network devices (vifs) I change : vif = ['bridge=xenbr2,type=netfront'] to vif = ['bridge=xenbr2,type=ioemu'] That should do it. Next, inside the VM, I copy over the regular kernel rpm that I want to end up running in hvm mode. In this example case it was : kernel-2.6.18-164.0.0.0.1.el5.x8664.rpm. I will use that later on in the process. I put this kernel simply in /root At this point I just start the vm with xm create vm.cfg and start my vnc console to the vm console. Oracle Linux will boot from the iso image, I just go through the install steps and click on UPgrade existing (not re-install). Because the VM is the same as the ISO the install won't actually do anything and it will run through instantly. When the "Reboot" button pops up, don't reboot. Switch to the command prompt console. hi alt-f2 to go to the shell prompt. Now it's easy : umount /mnt/sysimage/boot cd /mnt/sysimage chroot . mount /dev/hda1 (if that was your /boot partition) export PATH=/sbin:$PATH (just to clean that up) edit /etc/modprobe.conf and comment out the xen modules (just put a # in front) Install grub. if your /boot is hda1 then that is (hd0,0) $ grub root (hd0,0) setup (hd0) exit grub now you have a good bootsector, grub installed and you have your grub.conf file Install the new kernel cd root (this is your old /root in your pv image) rpm -ivh remove (or comment out) boot='d' in your vm.cfg restart the VM and you should be good to go, regular grub should start and load your environment. Caveats : this assumes you used labels for your filesystems. if /etc/fstab were to have devices listed then you would have to rename these device before rebooting as well. If you had a /dev/xvda disk then this would be /dev/hda or /dev/sda. All in all it is a relatively short and simple process.

  Read the article

• New features in TFS Demo Setup 1.0.0.2

  - by Tarun Arora

  Release Notes – http://tfsdemosetup.codeplex.com/ | Download | Source Code | Report a Bug | Ideas Just pushed out the 2nd release of the TFS Demo setup on CodePlex, below a quick look at some of the new features/improvements in the tool… Details of the existing features can be found here. Feature 1 – Set up Work Items Queries as Team Favorites The task board looks cooler when the team favourite work item queries show up on the task board. The demo setup console application now has the ability to set up the work item queries as team favorites for you. If you want to see how you can add Team Favorites programmatically, refer to this blogpost here. Image 1 – Task board without Team Favorites Let’s see how the TFS Demo Setup application sets-up team favorites as part of the run… Open up the DemoDictionary.xml and you should be able to see the new node <TeamFavorites> this accepts multiple <TeamFavorite>. You simply need to specify the <Type> as Query and in the <Name> specify the name of the work item query that you would like added as a favorite. Image 2 – Highlighting the TeamFavorites block in DemoDictionary.xml So, when the demo set up application is run with the above config, work item queries “Blocked Tasks” and “Open Impediments” are added as team favorites. They then show up on the task board, as highlighted in the screen shot below. Image 3 – Team Favorites setup during the TFS demo setup app execution Feature 2 – Choose what you want to setup and exclude the rest I had a great feature request come in requesting the ability to exclude parts of the setup at the sole discretion of the executioner. To accommodate this, I have added an attribute with each block, the attribute “Run” accepts “true” or “false”. If you set the flag to true then at the time of execution that block would be considered for setup and if you set the flag to false, the block will be ignored during the setup. So, lets look at an example below… The attribute "Run” is set to true for TeamSettings, Team Favorites, TeamMembers and WorkItems. So, all of these would be setup as part of the demo setup application execution. Image 4 – New Attribute Run added to all blocks in DemoDictionary.xml If I did not want to recreate the team and did not want to add new work items but only wanted to add favorites and team members to the existing team “AgileChamps1” then I could simple run the application with below DemoDictionary.xml. Note – TeamSettings Run=”false” and WorkItems Run=”false”. Image 5 – TeamFavorites and TeamMembers set as true and others set to false Feature 3 – Usability Improvement If you try and assign a work item to a team member that does not exist then the application throws a nasty exception. This behaviour has now been changed, upon adding such a work item, the work items will be created and not assigned to any user. The work item id will be printed to the console making it simple for you to assign the work item manually. As you can see in the screen shot below, I am trying to assign the work item to a user “Tarun” and a user “v2” both are *not valid users in my team project collection* so the tool creates the work items and provides me the work item id and lets me know that since the user is invalid the work item could not be assigned to the user. Better user experience ae Image 6 – Behaviour if work item assigned to users are in valid users in team project That’s about it for the current release. I have some new features planned for the next release. Mean while if you have any ideas/comments please feel free to leave a comment. Stay tuned for more… Enjoy! Other posts on TFS Demo Setup can be found here.

  Read the article

• ArchBeat Link-o-Rama Top 10 for December 9-15, 2012

  - by Bob Rhubart

  You click, we listen. The following list reflects the Top 10 most popular items posted on the OTN ArchBeat Facefbook page for the week of December 9-15, 2012. DevOps Basics II: What is Listening on Open Ports and Files – WebLogic Essentials | Dr. Frank Munz "Can you easily find out which WebLogic servers are listening to which port numbers and addresses?" asks Dr. Frank Munz. The good doctor has an answer—and a tech tip. Using OBIEE against Transactional Schemas Part 4: Complex Dimensions | Stewart Bryson "Another important entity for reporting in the Customer Tracking application is the Contact entity," says Stewart Bryson. "At first glance, it might seem that we should simply build another dimension called Dim – Contact, and use analyses to combine our Customer and Contact dimensions along with our Activity fact table to analyze Customer and Contact behavior." SOA 11g Technology Adapters – ECID Propagation | Greg Mally "Many SOA Suite 11g deployments include the use of the technology adapters for various activities including integration with FTP, database, and files to name a few," says Oracle Fusion Middleware A-Team member Greg Mally. "Although the integrations with these adapters are easy and feature rich, there can be some challenges from the operations perspective." Greg's post focuses on technical tips for dealing with one of these challenges. Podcast: DevOps and Continuous Integration In Part 1 of a 3-part program, panelists Tim Hall (Senior Director of product management for Oracle Enterprise Repository and Oracle’s Application Integration Architecture), Robert Wunderlich (Principal Product Manager for Oracle’s Application Integration Architecture Foundation Pack) and Peter Belknap (Director of product management for Oracle SOA Integration) discuss why DevOps matters and how it changes development methodologies and organizational structure. Good To Know - Conflicting View Objects and Shared Entity | Andrejus Baranovskis Oracle ACE Director Andrejus Baranovskis shares his thoughts -- and a sample application -- dealing with an "interesting ADF behavior" encountered over the weekend. Cloud Deployment Models | B. R. Clouse Looking out for the cloud newbies... "As the cloud paradigm grows in depth and breadth, more readers are approaching the topic for the first time, or from a new perspective," says B. R. Clouse. "This blog is a basic review of cloud deployment models, to help orient newcomers and neophytes." Service governance morphs into cloud API management | David Linthicum "When building and using clouds, the ability to manage APIs or services is the single most important item you can provide to ensure the success of the project," says David Linthicum. "But most organizations driving a cloud project for the first time have no experience handling a service-based architecture and don't see the need for API management until after deployment. By then, it's too late." Oracle Fusion Middleware Security: Password Policy in OAM 11g R2 | Rob Otto Rob Otto continues the Oracle Fusion Middleware A-Team "Oracle Access Manager Academy" series with a detailed look at OAM's ability to support "a subset of password management processes without the need to use Oracle Identity Manager and LDAP Sync." Understanding the JSF Lifecycle and ADF Optimized Lifecycle | Steven Davelaar Could you call that a surprise ending? Oracle WebCenter & ADF Architecture Team (A-Team) member learned a lot more than he expected while creating a UKOUG presentation entitled "What you need to know about JSF to be succesful with ADF." Expanding on requestaudit - Tracing who is doing what...and for how long | Kyle Hatlestad "One of the most helpful tracing sections in WebCenter Content (and one that is on by default) is the requestaudit tracing," says Oracle Fusion Middleware A-Team architect Kyle Hatlestad. Get up close and technical in his post. Thought for the Day "There is no code so big, twisted, or complex that maintenance can't make it worse." — Gerald Weinberg Source: SoftwareQuotes.com

  Read the article

• Oracle Announces Release of PeopleSoft HCM 9.1 Feature Pack 2

  - by Jay Zuckert

  Big things sometimes come in small packages.  Today Oracle announced the availability of PeopleSoft HCM 9.1 Feature Pack 2 which delivers a new HR self service user experience that fundamentally changes the way managers and employees interact with the HCM system.  Earlier this year we reviewed a number of new concept designs with our Customer Advisory Boards.  With the accelerated feature pack development cycle we have adopted, these innovations are  now available to all 9.1 customers without the need for an upgrade.   There are no new products that need to be licensed for the capabilities below. For more details on Feature Pack 2, please see the Oracle press release. Included in Feature Pack 2 is a new search-based menu-free navigation that allows managers to search for employees by name and take actions directly from the secure search results.  For example, a manager can now simply type in part of an employee’s first or last name and receive meaningful results from documents related to performance, compensation, learning, recruiting, career planning and more.   Delivered actions can be initiated directly from these search results and the actions are securely tied to HCM security and user role.  The feature pack also includes new pages that will enable managers to be more productive by aggregating key employee data into a single page.  The new Manager Dashboard and Talent Summary provide a consolidated view of data related to a manager’s team and individual team members, respectively.   The Manager Dashboard displays information relevant to their direct reports including team learning, objective alignment, alerts, and pending approvals requiring their attention.  The Talent Summary provides managers with an aggregated view of talent management-related data for an individual employee including performance history, salary history, succession options, total rewards, and competencies.   The information displayed in both the Manager Dashboard and Talent Summary is configurable by system administrators and can be personalized by each of your managers. Other Feature Pack 2 enhancements allow organizations to administer Matrix or Dotted-Line Relationship Management, which addresses the challenge of tracking and maintaining project-based organizations that cut across the enterprise and geographic regions.  From within the Company Directory and Org Viewer organization charts, managers now have access to manager self-service transactions from related actions.  More than 70 manager and employee self-service transactions have been tied into the related action framework accessible from Org Viewer, Manager Dashboard, Talent Summary and Secure Enterprise Search (SES) results.  In addition to making it easier to access manager self-service transactions, the feature pack delivers streamlined transaction pages making everyday tasks such as promoting an employee faster and more efficient. With the delivery of PeopleSoft HCM 9.1 Feature Pack 2, Oracle continues to deliver on its commitment to our PeopleSoft customers.  With this feature pack, HCM 9.1 customers will be able to deploy the newest functionality quickly, without a major release upgrade, and realize added value from their existing PeopleSoft investment.    For customers newly deploying 9.1, a new download with all of Feature Pack 2  will be available early next year.   This will aslo include recertified upgrade paths from 8.8, 8.9 and 9.0, for customers in the upgrade process.

  Read the article

• Security and the Mobile Workforce

  - by tobyehatch

  Now that many organizations are moving to the BYOD philosophy (bring your own devices), security for phones and tablets accessing company sensitive information is of paramount importance. I had the pleasure to interview Brian MacDonald, Principal Product Manager for Oracle Business Intelligence (BI) Mobile Products, about this subject, and he shared some wonderful insight about how the Oracle Mobile Security Tool Kit is addressing mobile security and doing some pretty cool things.  With the rapid proliferation of phones and tablets, there is a perception that mobile devices are a security threat to corporate IT, that mobile operating systems are not secure, and that there are simply too many ways to inadvertently provide access to critical analytic data outside the firewall. Every day, I see employees working on mobile devices at the airport, while waiting for their airplanes, and using public WIFI connections at coffee houses and in restaurants. These methods are not typically secure ways to access confidential company data. I asked Brian to explain why. “The native controls for mobile devices and applications are indeed insufficiently secure for corporate deployments of Business Intelligence and most certainly for businesses where data is extremely critical - such as financial services or defense - although it really applies across the board. The traditional approach for accessing data from outside a firewall is using a VPN connection which is not a viable solution for mobile. The problem is that once you open up a VPN connection on your phone or tablet, you are creating an opening for the whole device, for all the software and installed applications. Often the VPN connection by itself provides insufficient encryption – if any – which means that data can be potentially intercepted.” For this reason, most organizations that deploy Business Intelligence data via mobile devices will only do so with some additional level of control. So, how has the industry responded? What are companies doing to address this very real threat? Brian explained that “Mobile Device Management (MDM) and Mobile Application Management (MAM) software vendors have rapidly created solutions for mobile devices that provide a vast array of services for controlling, managing and establishing enterprise mobile usage policies. On the device front, vendors now support full levels of encryption behind the firewall, encrypted local data storage, credential management such as federated single-sign-on as well as remote wipe, geo-fencing and other risk reducing features (should a device be lost or stolen). More importantly, these software vendors have created methods for providing these capabilities on a per application basis, allowing for complete isolation of the application from the mobile operating system. Finally, there are tools which allow the applications themselves to be distributed through enterprise application stores allowing IT organizations to manage who has access to the apps, when updates to the applications will happen, and revoke access after an employee leaves. So even though an employee may be using a personal device, access to company data can be controlled while on or near the company premises. So do the Oracle BI mobile products integrate with the MDM and MAM vendors? Brian explained that our customers use a wide variety of mobile security vendors and may even have more than one in-house. Therefore, Oracle is ensuring that users have a choice and a mechanism for linking together Oracle’s BI offering with their chosen vendor’s secure technology. The Oracle BI Mobile Security Toolkit, which is a version of the Oracle BI Mobile HD application, delivered through the Oracle Technology Network (OTN) in its component parts, helps Oracle users to build their own version of the Mobile HD application, sign it with their own enterprise development certificates, link with their security vendor of choice, then deploy the combined application through whichever means they feel most appropriate, including enterprise application stores.  Brian further explained that Oracle currently supports most of the major mobile security vendors, has close relationships with each, and maintains strong partnerships enabling both Oracle and the vendors to test, update and release a cooperating solution in lock-step. Oracle also ensures that as new versions of the Oracle HD application are made available on the Apple iTunes store, the same version is also immediately made available through the Security Toolkit on OTN.  Rest assured that as our workforce continues down the mobile path, company sensitive information can be secured.  To listen to the entire podcast, click here. To learn more about the Oracle BI Mobile HD, click  here To learn more about the BI Mobile Security Toolkit, click here 

  Read the article

• SQL Script to Assign All Items to ALL Sites with Dynamics GP

  - by Ryan McBee

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} When setting up new items within Microsoft Dynamics GP, you will often run into the error message below which reads “This site is not assigned to the selected item.  Do you want to assign this site?”  The fix is quite simple given that you simply click the Add button below which opens up the Item Quantities Maintenance window which you will hit the save button and proceed with the entry of your Sales Order or Purchase Order.   If you have a lot of new items into GP and have just one Site ID setup, the best approach to assigning your items to a particular site is by going to the Site Maintenance Window which is located in Cards>>Inventory>>Site.  Once you are in the window below, you can click the Assign button to assign Items to the Site selected.     However, if you have you a lot of Sites and Items created, this can be quite a cumbersome and time consuming process.  For that, I have created the following SQL Script below that Assigns all Items to all Site ID’s within Microsoft Dynamics GP 2010.    declare @item varchar(100)       , @loc varchar(100)       , @ItemExist int         DECLARE TablePositionCursor CURSOR FOR         SELECT itemnmbr from IV00101 i         OPEN TablePositionCursor       FETCH NEXT FROM TablePositionCursor INTO @item       WHILE (@@fetch_status <> -1)             BEGIN                         DECLARE TablePositionCursor2 CURSOR FOR                         select locncode from IV40700                   OPEN TablePositionCursor2                   FETCH NEXT FROM TablePositionCursor2 INTO  @loc                   WHILE (@@fetch_status <> -1)                         BEGIN                           SELECT @ItemExist = isnull(count(*), 0) FROM IV00102 where ITEMNMBR = @item and LOCNCODE = @loc                                                 if @ItemExist  = 0                               BEGIN                                      insert into iv00102 values(                                     @item                                     ,@loc                                     ,''                                     ,2                                     ,''                                     ,0                                     ,0                                     ,0                                     ,0                                     ,'01/01/1900'                                     ,''                                     ,'01/01/1900'                                     ,0                                     ,0                                     ,0                                     ,0                                     ,0                                     ,0                                     ,0                                     ,0                                     ,0                                     ,0                                     ,0                                     ,0                                     ,'01/01/1900'                                     ,'01/01/1900'                                     ,'01/01/1900'                                     ,'01/01/1900'                                     ,0                                     ,''                                     ,''                                     ,''                                     ,1                                     ,0                                     ,0                                     ,1                                     ,0                                     ,0                                     ,1                                     ,2                                     ,0                                     ,0                                     ,0                                     ,0                                     ,0                                     ,0                                     ,0                                     ,1                                     ,0                                     ,0                                     ,0                                     ,3                                     ,0                                     ,0                                     ,0                                     ,''                                     ,''                                     ,''                                     ,''                                     ,''                                     ,''                                     ,''                                     ,''                                     ,1                                     ,1                                     ,''                                     ,1                                     ,1                                     ,0                                     ,1                                     ,1                                     ,1                                     ,0                                     ,0                                     ,0                                     ,0                                     ,0                                       )                         END                               FETCH NEXT FROM TablePositionCursor2 INTO @loc                         END                   DEALLOCATE TablePositionCursor2                     FETCH NEXT FROM TablePositionCursor INTO  @item             END       DEALLOCATE TablePositionCursor     The script below works just for GP 2010 since the columns in the IV00102 have changed from version to version.  If you need it for prior versions, please email me and I will send it to you.   Disclaimer: I tested this on limited data, if you find an issue or have a suggestion for improvement, please let me know and I will post the update here for everyone.  This blog is provided "AS IS" with no warranties, and confers no rights.

  Read the article

• Sprinkle Some Magik on that Java Virtual Machine

  - by Jim Connors

  GE Energy, through its Smallworld subsidiary, has been providing geospatial software solutions to the utility and telco markets for over 20 years.  One of the fundamental building blocks of their technology is a dynamically-typed object oriented programming language called Magik.  Like Java, Magik source code is compiled down to bytecodes that run on a virtual machine -- in this case the Magik Virtual Machine. Throughout the years, GE has invested considerable engineering talent in the support and maintenance of this virtual machine.  At the same time vast energy and resources have been invested in the Java Virtual Machine. The question for GE has been whether to continue to make that investment on its own or to leverage massive effort provided by the Java community? Utilizing the Java Virtual Machine instead of maintaining its own virtual machine would give GE more opportunity to focus on application solutions.   At last count, there are dozens, perhaps hundreds of examples of programming languages that have been hosted atop the Java Virtual Machine.  Prior to the release of Java 7, that effort, although certainly possible, was generally less than optimal for languages like Magik because of its dynamic nature.  Java, as a statically typed language had little use for this capability.  In the quest to be a more universal virtual machine, Java 7, via JSR-292, introduced a new bytecode called invokedynamic.  In short, invokedynamic affords a more flexible method call mechanism needed by dynamic languages like Magik. With this new capability GE Energy has succeeded in hosting their Magik environment on top of the Java Virtual Machine.  So you may ask, why would GE wish to do such a thing?  The benefits are many: Competitors to GE Energy claimed that the Magik environment was proprietary.  By utilizing the Java Virtual Machine, that argument gets put to bed.  JVM development is done in open source, where contributions are made world-wide by all types of organizations and individuals. The unprecedented wealth of class libraries and applications written for the Java platform are now opened up to Magik/JVM platform as first class citizens. In addition, the Magik/JVM solution vastly increases the developer pool to include the 9 million Java developers -- the largest developer community on the planet. Applications running on the JVM showed substantial performance gains, in some cases as much as a 5x speed up over the original Magik platform. Legacy Magik applications can still run on the original platform.  They can be seamlessly migrated to run on the JVM by simply recompiling the source code. GE can now leverage the huge Java community.  Undeniably the best virtual machine ever created, hundreds if not thousands of world class developers continually improve, poke, prod and scrutinize all aspects of the Java platform.  As enhancements are made, GE automatically gains access to these. As Magik has little in the way of support for multi-threading, GE will benefit from current and future Java offerings (e.g. lambda expressions) that aim to further facilitate multi-core/multi-threaded application development. As the JVM is available for many more platforms, it broadens the reach of Magik, including the potential to run on a class devices never envisioned just a few short years ago.  For example, Java SE compatible runtime environments are available for popular embedded ARM/Intel/PowerPC configurations that could theoretically host this software too. As compared to other JVM language projects, the Magik integration differs in that it represents a serious commercial entity betting a sizable part of its business on the success of this effort.  Expect to see announcements not only from General Electric, but other organizations as they realize the benefits of utilizing the Java Virtual Machine.

  Read the article

• WPF: Running code when Window rendering is completed

  - by Ilya Verbitskiy

  WPF is full of surprises. It makes complicated tasks easier, but at the same time overcomplicates easy  task as well. A good example of such overcomplicated things is how to run code when you’re sure that window rendering is completed. Window Loaded event does not always work, because controls might be still rendered. I had this issue working with Infragistics XamDockManager. It continued rendering widgets even when the Window Loaded event had been raised. Unfortunately there is not any “official” solution for this problem. But there is a trick. You can execute your code asynchronously using Dispatcher class.   Dispatcher.BeginInvoke(new Action(() => Trace.WriteLine("DONE!", "Rendering")), DispatcherPriority.ContextIdle, null);   This code should be added to your Window Loaded event handler. It is executed when all controls inside your window are rendered. I created a small application to prove this idea. The application has one window with a few buttons. Each button logs when it has changed its actual size. It also logs when Window Loaded event is raised, and, finally, when rendering is completed. Window’s layout is straightforward.   1: <Window x:Class="OnRendered.MainWindow" 2: xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" 3: xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" 4: Title="Run the code when window rendering is completed." Height="350" Width="525" 5: Loaded="OnWindowLoaded"> 6: <Window.Resources> 7: <Style TargetType="{x:Type Button}"> 8: <Setter Property="Padding" Value="7" /> 9: <Setter Property="Margin" Value="5" /> 10: <Setter Property="HorizontalAlignment" Value="Center" /> 11: <Setter Property="VerticalAlignment" Value="Center" /> 12: </Style> 13: </Window.Resources> 14: <StackPanel> 15: <Button x:Name="Button1" Content="Button 1" SizeChanged="OnSizeChanged" /> 16: <Button x:Name="Button2" Content="Button 2" SizeChanged="OnSizeChanged" /> 17: <Button x:Name="Button3" Content="Button 3" SizeChanged="OnSizeChanged" /> 18: <Button x:Name="Button4" Content="Button 4" SizeChanged="OnSizeChanged" /> 19: <Button x:Name="Button5" Content="Button 5" SizeChanged="OnSizeChanged" /> 20: </StackPanel> 21: </Window>   SizeChanged event handler simply traces that the event has happened.   1: private void OnSizeChanged(object sender, SizeChangedEventArgs e) 2: { 3: Button button = (Button)sender; 4: Trace.WriteLine("Size has been changed", button.Name); 5: }   Window Loaded event handler is slightly more interesting. First it scheduler the code to be executed using Dispatcher class, and then logs the event.   1: private void OnWindowLoaded(object sender, RoutedEventArgs e) 2: { 3: Dispatcher.BeginInvoke(new Action(() => Trace.WriteLine("DONE!", "Rendering")), DispatcherPriority.ContextIdle, null); 4: Trace.WriteLine("Loaded", "Window"); 5: }   As the result I had seen these trace messages.   1: Button5: Size has been changed 2: Button4: Size has been changed 3: Button3: Size has been changed 4: Button2: Size has been changed 5: Button1: Size has been changed 6: Window: Loaded 7: Rendering: DONE!   You can find the solution in GitHub.

  Read the article

< Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >