Search Results

Search found 15323 results on 613 pages for 'db2 connect'.

Page 384/613 | < Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >

• How to find ip address of my Asus RT-AC86U in Access Point mode?

  - by WilliamKF

  I'm using an Asus wireless router model RT-AC68U and can connect fine to the internet using it wirelessly. I configured the router to be an Access Point, but having done so, I can no longer locate the GUI to adjust the router as I have no idea what its IP Address is anymore. The router is plugged into a cable modem and router which is a model SMCD3G is a business class gateway labeled Comcast Business IP Gateway. This gateway is assigning ip addresses in the range 10.1.10.XX and I went to the web interface at 10.1.10.1 and listed the connected devices and see my laptop which is connected to the Asus access point along with a few other devices, but none of the devices listed are the Asus router (I tried all the six ip addresses listed). How can I determine the IP Address of my Asus router in access point mode so I can see the GUI interface again to control the router other than by doing a factory reset?

  Read the article

• Windows 8 Microsoft Account and Microsoft Store doesn't allow login

  - by Prabhpreet

  The problem is that I have to go through proxy here in college to make my internet work. When I signed with my live id to switch to the Microsoft account in Windows 8, it recognized and validate my security questions but says it cannot connect to Microsoft Services. All other apps like mail, messenger, etc. work except for the Windows Store. The windows store what apps are available but when installed, queues it up for a pending download. Is there a way to modify my proxy settings so that I can access both these features?

  Read the article

• Windows service running as network service - how does it authenticate? Breaking change in W2K8?

  - by Max

  A Windows service running as "Network Service" talks to services on other machines (here: SQL Server and Analysis Services), using Windows authentication. For authentication, we have to grant permissions to the machine account of the service. E.g. if service runs on server MYSERVER in domain MYDOMAIN, it'll authenticate itself as "MYDOMAIN\MYSERVER$". - Am I correct, so far? Now here's my question: does this still apply when talking to a service on the SAME machine? Or will it authenticate with something like "NT AUTHORITY\Network Service" instead when connecting to a local service? And: is there any chance this is a breaking change from Windows 2003 to Windows 2008? We're having an actual issue in our system where the account was able to connect to local services with only the machine account having permissions in W2K3. In W2K8, this doesn't seem to work anymore: authentication to local services now fails, but still works to remote machines.

  Read the article

• can't access SAMBA shares on UBUNTU-server from other computers

  - by larand

  Installed UBUNTU-server 12.04 and configured /etc/samba/smb.conf as: #======================= Global Settings ======================= [global] workgroup = HEMMA server string = %h server (Samba, Ubuntu) security = user wins support = yes dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d encrypt passwords = no passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user ############ Misc ############ usershare allow guests = yes #======================= Share Definitions ======================= [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no [Bilder original] comment = Original bilder path = /mnt/bilder/org browseable = yes read only = no guest ok = no create mask = 0755 [Bilder publika] comment = Bilder för allmän visning path = /mnt/bilder/public browseable = yes read only = yes guest ok = yes [Musik] comment = Musik path = /mnt/music/public browseable = yes read only = yes guest ok = yes I have a network setup around a 4G router "HUAWEI B593" where some computers are connected by WIFI and others by LAN. The server is connected by LAN. On one computer running windows XP I can see the server but are not allowed to acces them. On another computer on the WIFI-net running win7 I cannot see the server at all but I can ping the server and I can see the smb-protocoll is running when sniffing with wireshark. I don't primarily want to use passwords, computers on the lan and wifi should be able to connect without any login-procedure. I'm sure my config is not sufficient but have hard to understand how I should do. Theres a lot of descriptions on the net but most is old and none have been of any help. I'm also confused by the fact that I can not se the sever on my win7-machine even though it communicates with the samba-server. Would be very happy if anyone could spread some light over this mess.

  Read the article

• Slow performance over network (Ubuntu)

  - by Filipe Santos

  i did setup this NodeJs TCP Server and tested it with a message flooder. Just to see how the performance of the server is. While the message throughput is great if i run the server and the message flooder on the same computer (ubuntu), the throughput dramaticaly decreases if i start the server on computer1(ubuntu1) and the message flooder on computer2(also ubuntu). Both PC are on the same network. In fact, they are directly connected to each other. I started searching the internet for reasons and i suppose i need to tune TCP on both Ubuntu-pcs but until now i haven't been successfull at all. Has anyone experienced such problems, or could someone help me out? Thanks Here the flooding code: var net=require('net') var client = net.createConnection(5000, "10.0.0.2") client.addListener("connect", function(){ for(var i = 0; i < 1000; i++) { client.write("message "); } })

  Read the article

• How to configure sendmail to relay local user mail to public host?

  - by Chau Chee Yang

  I am using Linux/Fedora's sendmail as my mail server. The server do not has a public domain name. It connect to Internet via dial-up. There are few users in the server. I have successfully configure my sendmail to relay mail to public host (via smart_host): # mail <user>@gmail.com [email protected] receive mail from this private host. However, if I send a mail to local user (without domain name): # mail <user> All mails are deliver to my server's mail spooler (/var/spool/mail). I wish all mails send to local user may relay to a public domain that I have registered, is that possible to do so with sendmail? mail user1 will send mail to [email protected] mail user2 will send mail to [email protected]

  Read the article

• laptop does not boot

  - by devan

  I have hp probook 4520s lap. But now it does not boot. When I press switch on button fans are working but it shows black screen. HDD light just blink one or two times when start but it will not continue. And usually web cam light should blink one time when startup but it doesn't. I connect to different monitor but couldn't see a output. This lap bought 3 months before but it doesn't have international warranty. Therefore I can not do anything. If someone can provide any clue or suggestion that what happened and what should I do, appreciated. thank you.

  Read the article

• How to establish SIP connection, when SIP-proxy is required?

  - by LA_

  I have Asterisk/1.8.13.1 Asterisk GUI-version : SVN--r Yes, quite old one, but I can not update it since this is installed on my Synology NAS. NAS is connected to internet thru router Asus RT-N16. I should use the following data to connect to the server: Auth name – 7499952XXXX User name/User ID/Display Name – nickname Authorization user name - [email protected] Domain - sip.beeline.ru SIP proxy server - msk.sip.beeline.ru I've also found the following string: [email protected]:password:[email protected]@msk.sip.beeline.ru:5060/7499952XXXX I've tested the parameters on my PC thru X-Lite and it works well (so, assume there is no any problem with the router, no need to do anything with router's NAS settings). But since I am quite new to Asterisk, I can not understand where to input all these data. Asterisk GUI doesn't have fields for proxy: Can somebody please help me with step-by-step instruction? Thank you in advance!

  Read the article

• Antenna Aligner Part 8: It's Alive!!!

  - by Chris George

  Finally the day has come, Antenna Aligner v1.0.1 has been uploaded to the AppStore and . "Waiting for review" .. . fast forward 7 days and much checking of emails later WOO HOO! Now what? So I set my facebook page to go live  https://www.facebook.com/AntennaAligner, and started by sending messages to my mates that have iphones! Amazingly a few of them bought it! Similarly some of my colleagues were also kind enough to support me and downloaded it too! Unfortunately the only way I knew they had bought is was from them telling me, as the iTunes connect data is only updated daily at about midday GMT. This is a shame, surely they could provide more granular updates throughout the day? Although I suppose once an app has been out in the wild for a while, daily updates are enough. It would, however, be nice to get a ping when you make your first sale! I would have expected more feedback on my facebook page as well, maybe I'm just expecting too much, or perhaps I've configured the page wrong. The new facebook timeline layout is just confusing, and I'm not sure it's all public, I'll check that! So please take a look and see what you think! I would love to get some more feedback/reviews/suggestions... Oh and watch out for the Android version coming soon!

  Read the article

• Coldfusion multiserver instance hangs

  - by David Sedeño

  I have a coldfusion 8 multiserver setup with IIS in Windows 2008 Standard SP2 and when one instance "hangs" (I can't connect to the instance from fusion reactor) the web server throws a "503 service unavailable". The remains instance seems to works ok in fusion reactor but the website have only the 503. I have to restart jvm processes and IIS to get the website work again. The jvm processes have the option -Xmx2048m and the instanaces have 2.5Gb allocated. Maybe the jvm process reach the 2Gb limit and stop working? Can be a problem between IIS and CF instances? I'm new to CF debugging process, how can I find why the instance hangs? Thanks

  Read the article

• Connecting FreeNAS 8 to Mac OS X Lion LDAP Server

  - by Absolution

  I currently have Mac OS X Lion Server running from a MacMini and want to use it purely as an LDAP server for authentication for FreeNAS 8. I have FreeNAS setup and running on a VM, all features working correctly and as expected however I cannot connect to my LDAP server (MacMini). Error message; **Nss_ldap: could not search LDAP server – server is unavailable** For LDAP service settings in FreeNAS, I know my Hostname and Base DN are correct (exact copies of what I set originally and ones that are shown in server:open directory overview) however I am unsure what to enter for Root bind DN, password and Suffix’s. I have researched into where I can find these out and other than following the FreeNAS examples it appears there is a way to find out within the Server Workgroup Manager specific to my settings – however this function is unavailable to me and cannot be ‘ticked’ to view for some strange reason. Some forums explain how Root bind DN should be uid=admin, dc=… and others cn=admin, dc=… – I’m rather confused and would appreciate your help or advice with this.

  Read the article

• Hosting 3 domains on 3 PC (1 domain per PC) with only 1 static IP address

  - by StealthRT

  Hey all i am trying to figure this out here. I have 3 PC's that are hooked into my router which i have a static IP for. I am currently hosting a web site (ex: blah1.com) on the 1st PC but have yet to connect PC 2 and 3 up to the network. That one PC thats online is using port 77. I direct all 80 traffic to port 77 using that servers IP address (192.168.x.xxx) My question is, how can i direct traffic for my other 2 domains (ex: blah2.com and blah3.com) to the 2 individual PC's (ip's) as i already am doing with the 1st PC if i can only use one port 80 to direct taffic to the website in?

  Read the article

• How to find the /dev name of my USB device

  - by mustafa

  I am running Ubuntu 11 on VmWare on Windows XP. I want to format an SD card in Ubuntu. But, I can't figure out which /dev/xxx device the SD card is. I plug the card into the built-in socket of my laptop. I "safely remove" the device in Windows. Then, I "connect" the PCMCIA reader in VmWare. Now, I was supposing to see a new device like /dev/sdx. But, it doesn't appear :( How can I find what the name of my USB device's name and mount it? /var/log/message is empty. Here is the output of dmesg: [ 5268.927308] usb 2-1: new full speed USB device number 12 using uhci_hcd And, here is the last lines of /var/log/syslog: Oct 31 18:51:21 ubuntu kernel: [ 5268.927308] usb 2-1: new full speed USB device number 12 using uhci_hcd Oct 31 18:51:21 ubuntu mtp-probe: checking bus 2, device 12: "/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1" Oct 31 18:51:21 ubuntu mtp-probe: bus: 2, device: 12 was not an MTP device

  Read the article

• Mysql Error 2002 (HY000) on Snow Leopard

  - by Ole Media

  My boss update my computer to Snow Leopard, after the update we had a set back and deleted a few files/folders, since then is just nightmare after another one. I finally getting things back but I'm still having problems with MySQL. This is what I did: Deleted ALL of mysql files/folders Download and installed the packages mysql-5.1.45-osx10.6-x86_64.dmg installed the Startup item and the preferences panel After the above, I tried to start MySQL from the preferences panel without luck, and running the following command from Terminal /usr/local/mysql/bin/mysql I get the following result ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2) I looked at some other post for possible solutions, but what they does not exactly fits my problem, so I cannot find a solution. I'm new to all this and your help will be much appreciated.

  Read the article

• CheckPoint VPN-1 SecureClient inability to navigate behind a Linksys WAG300N

  - by user46819

  I have a Linksys WAG300N, I'm accessing my LAN with Wifi and everything works fine on my Windows 7 Enterprise laptop. When I try to connect to my company's VPN the connection succeeds, but I cannot access any internet site either within my work network or public site like Yahoo or Google. In my Linksys control panel I already verified all types of VPNs are enable to passthrough. Normal IPSec and Windows VPN worked in the past without any problems. CheckPoint seems to have a solution, but I do not have the ability to change the IP in my client and of course using another NAT device in between is not a solution for me. Edit: adding link to the Checkpoint solution, https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk26189

  Read the article

• How do I ensure my Apple keyboard connects on boot?

  - by Stacey Richards

  I am using Ubuntu 10.04 on a laptop and have an Apple wireless keyboard which pairs fine. Every time I turn my computer off and back on again my keyboard stops working. I have to use the keyboard on my laptop to log in. Once I've logged in, in order to get the wireless keyboard to work, I need disconnect and reconnect it by: Clicking on the Bluetooth icon, select Apple Wireless Keyboard from the drop down menu, then click on Disconnect. Clicking on the Bluetooth icon, select Apple Wireless Keyboard from the drop down menu, then click on Connect. Looking through syslog, to see what's happening during boot, I find: Nov 25 10:29:21 sony kernel: [ 24.525372] apple 0005:05AC:0239.0002: parse failed Nov 25 10:29:21 sony kernel: [ 24.525379] apple: probe of 0005:05AC:0239.0002 failed with error -14 and then later in syslog, once I've disconnected then connected the keyboard, I find: Nov 25 10:30:14 sony bluetoothd[1247]: link_key_request (sba=00:21:4F:49:8A:DB, dba=E8:06:88:5A:E0:D4) Nov 25 10:30:14 sony kernel: [ 79.427277] input: Apple Wireless Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/bluetooth/hci0/hci0:12/input11 Nov 25 10:30:14 sony kernel: [ 79.427611] apple 0005:05AC:0239.0003: input,hidraw1: BLUETOOTH HID v0.50 Keyboard [Apple Wireless Keyboard] on 00:21:4F:49:8A:DB I can't find anything helpful when Googling "apple: probe of failed with error -14".

  Read the article

• File and Printer Sharing Port issue in Windows 7 64 bit

  - by Mohit

  So, This is totally weird and I could not find any way to fix it. In simple words after the diagnosis this what is happening. On a windows 7 64 bit box, Whenever I am trying to access a server using file share. It is trying to connect to port 80 http on the place of 445. I observed that using WireShark. Telnet to 445 works. Any clue how to fix this. Scanned the machine using Malware bytes, Symantec and MS live essentials . I dont want to recreate the whole machine again. Please help me here. Regards Mohit Thakral

  Read the article

• Windows refuses to believe printer is online unless I delete and re-add it

  - by Marcin

  I have a Canon MP560. It is online, in the sense that (a) I can connect to its internal web server; and (b) if I delete the printer in windows (windows 7), and reinstall it, windows will recognise that the printer is online, and talk to it. In all other cases, the windows and mac computers (purchased last week, running whatever is the latest and greatest mac os) in my household will simply not recognise that the printer is online. The printer is statically configured to use the same IP address, so that's not an issue. Because the printer works just fine with windows after delete and re-add, I assume that the issue with the mac is that I haven't installed whatever drivers Macs need to talk to Canon printers over a network.

  Read the article

• How to run an Application as another user?

  - by takpar

  I use krusader for file management stuff. the problem is that apache's DocumentRoot should be under chown www-data:www-data /path/to/www. so using krusader (which is run under my account) I've not write access to /path/to/www while I really need. I don't know how other developers can continue doing things with such a restriction! I wondered if I could run krusader as www-data then I will be able to easily play with files. but using su - www-data asked me for www-data's password!! So, how can I run an application (like krusader) as another user (like www-data) in Gnome? or is there any other solution for my case? (tough I'm really curious to know the answer!) keep in mind that I know I can run it as root! but this will cause some permission problems when using cp and mkdir, you know. PS: sudo and gksudo did not help: $ gksudo -u -www-data krusader No protocol specified krusader: cannot connect to X server :0.0 Final Note: according the best answer, i did chmod u+w /path/to/www and my problem solved. but i still has not been succeeded in opening krusader as another user!

  Read the article

• How do I get OBDII software working?

  - by NoBugs

  I have an ODBII USB cable for vehicle diagnostics, unfortunately I haven't been able to get it working on Ubuntu 12.04. The closest I've come is using the VAG-COM software with wine, using the ln -s /dev/ttyUSB0 ~/.wine/dosdevices/com1 trick and running stty -F /dev/ttyUSB0 speed 9600 repeatedly. It will connect and show the vehicle is OBDII, but none of the useful features seem to be working. I tried: Scantool - says it's connecting to the /dev/device in terminal, but doesn't. obdgpslogger - times out all the time. pyobd - This seems to be the most up-to-date source I could find, I had to adjust the code a bit to work (see here for changes). Still, in obd_io.py interpret_result function, it says it's looking for 4 space separated numbers, where the usb-serial is receiving bogus code "0100" instead? The device shows up in lsusb as: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Is the problem that these native tools don't expect a USB serial, or a serial of this type? Or are these apps too old to recognize OBD2 of this vehicle?

  Read the article

• Can I create an SSH user which can access only certain directory?

  - by RiMMER

  I have a Virtual Private Server which I can connect to using SSH with my root account, being able to execute any linux command and access all the disk area, obviously. I would like to create another user account, which would be able to access this server using SSH too, but only to a certain directory, for example /var/www/example.com/ For example, imagine this user has a HUGE error.log file (500 MB) located in /var/www/example.com/logs/error.log When accessing this file using FTP, this user needs to download 500 MB to view the last lines of the log, but I'd like him to be able to execute something like this: tail error.log Therefore I need him to be able to access the server using SSH, but I don't want to grant him access to all server areas. How can I do this?

  Read the article

• Configuring log4j on weblogic server for web applications.

  - by adejuanc

  To configure Weblogic server : 1.- Read the following link : How to Use Log4j with WebLogic Logging Services http://download.oracle.com/docs/cd/E12840_01/wls/docs103/logging/config_logs.html#wp1014610 Here the step by step : 2.- Go to WL_HOME/server/lib and copy wllog4j.jar to the server CLASSPATH, to do this copy the file into DOMAIN_NAME/lib 3.- Download log4j jar (in my case I had not the file) from http://logging.apache.org/log4j/1.2/download.html , in this case the last available version is log4j-1.2.17.jar, and copy the file into DOMAIN_NAME/lib (As step 2). 4.- In this case I activate log4j using WLST (Weblogic Scripting Tool), as bellow : 4.1 .- As you're using windows, execute a terminal window and go to DOMAIN_NAME/bin and run the file setDomainEnv.cmd (this file will set the environment to run java). 4.2 .- Execute the following comands : C:\>java weblogic.WLST wls:/offline> connect('username','password') wls:/mydomain/serverConfig> edit() wls:/mydomain/edit> startEdit() wls:/mydomain/edit !> cd("Servers/$YOUR_SERVER_NAME/Log/$YOUR_SERVER_NAME" wls:/mydomain/edit/Servers/myserver/Log/myserver !> cmo.setLog4jLoggingEnabled(true) wls:/mydomain/edit/Servers/myserver/Log/myserver !> save() wls:/mydomain/edit/Servers/myserver/Log/myserver !> activate() you can use ls() to list the objects under the WLS directory this will activate log4j to use it with WLS. Configuring WebLogic Logging Services http://download.oracle.com/docs/cd/E12840_01/wls/docs103/logging/config_logs.html To configure applications : 1. Create a log4j.properties file as bellow log4j.debug=TRUE log4j.rootLogger=INFO, R log4j.appender.R=org.apache.log4j.RollingFileAppender log4j.appender.R.File=/home/server.log log4j.appender.R.MaxFileSize=100KB log4j.appender.R.MaxBackupIndex=5 log4j.appender.R.layout=org.apache.log4j.PatternLayout log4j.appender.R.layout.ConversionPattern=%d{yyyy-MM-dd HH:mm:ss.SSSS} %p %t %c – %m%n 2. Copy the file to /WEB-INF/classes directory. of your application. 3.- implement also the last action provided to activate log4j on WLS

  Read the article

• CentOS openLDAP cert trust issues

  - by 84104

  # LDAPTLS_CACERTDIR=/etc/ssl/certs/ ldapwhoami -x -ZZ -H ldaps://ldap.domain.tld ldap_start_tls: Can't contact LDAP server (-1) additional info: TLS error -8172:Peer's certificate issuer has been marked as not trusted by the user. # openssl s_client -connect ldap.domain.tld:636 -CApath /etc/ssl/certs <... successful tls negotiation stuff ...> Compression: 1 (zlib compression) Start Time: 1349994779 Timeout : 300 (sec) Verify return code: 0 (ok) --- openssl seems to think the certificate is fine, but openldap's libraries (pam_ldap exhibits similar behavior, which is how I got on to this mess) disagree. What am I doing wrong?

  Read the article

• How to statically configure DNS servers on a Cisco router when the WAN interface uses DHCP?

  - by Massimo

  I have a Cisco router (model 887VA, IOS 15.4) used to connect a LAN to the Internet via ADSL. The WAN interface uses DHCP: interface ATM0.1 point-to-point ip address dhcp I need the router to use a statically-defined DNS server for name resolution: ip name-server A.B.C.D However, the router insists on using the DNS servers supplied by the ISP via DHCP: Router#ping www.google.com Translating "www.google.com"...domain server (<ISP DNS>) [OK] Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 173.194.116.208, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/45/48 ms How can I tell the router to ignore the ISP-supplied DNS servers and only use the statically-configured one?

  Read the article

• Is /home encryption useful on a server?

  - by Dennis

  I've got a question about the use of encryption: I set up a Ubuntu 12.04 server to use it as a router, file server for backups and webserver. Of course, it is probably not the best idea to put backups on the same system as a web server, but it is only for private usage and I don't want to spend too much money. So I thought it is not a bad idea to set up /home-encryption for the backup-user-account with which I do my backups. But in the same moment, another quesiton arises: Does it still makes sense? Via SSH, root login is disabled. And access to the /home-folder of that user is reduced to the user itself. So the only scenario to access the /home-folder is to connect keyboard/display to the server, login as root and change to /home. Or have I overseen a scenario? In case I am right, you can only access the /home-folder from "outside" as the backup-user. But than, encryption also doesn't make sense anymore. Am I right about that thoughts? Or do you still see a way to access the /home-folder of the backup user so that encryption still makes sense? Thanks for your help in advance!

  Read the article

< Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >