Search Results

Search found 15323 results on 613 pages for 'db2 connect'.

Page 383/613 | < Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >

  • Switches with 802.1x "supplicant timeout" feature?

    - by chris
    I'm looking for a complete list of switches which will allow 802.1x and normal (non-supplicant) enabled hosts to connect to the same ports on a switch. This is useful for areas where there are semi-open ports such as a lobby area or a library where corporate and guest users may use the same ports but you want them to have different access profiles and where it isn't expected that guests would have 802.1x configured on their system. For instance, Enterasys and Extreme Networks both have a feature where if the switch doesn't see an EAPOL packet from the client in a certain amount of time, it puts the port into a "guest" VLAN; if it sees an 802.1x supplicant, it tries to authenticate the user via 802.1x and if they succeed, it does what the radius server tells it to do with that port (IE put the port into a certain VLAN, apply certain ACLs, etc) Do other vendors have this sort of feature, or is it expected that a switch will do both 802.1x and MAC authentication, and the "supplicant timeout" feature is implemented with a blanket allow on the MAC authentication?

    Read the article

  • Computer to Tv cable question

    - by Keith D
    Hi all. Heres my query : I have a PC with all the usual outputs and a couple of TVs in the house with inputs to connect to a computer. Now, what i would like to do is get rid of cable TV and using the input into the spliters in the basement,( ie. where the input cable from outside actually feeds the system ) have the computer become the "Cable supplier" ( so to speak ) and have the output ( via some sort of box ) from the computer, convert what is on my monitor into an RF signal that is then fed into the cables in my house and ultimately to each TV / room . I don't know if there is such an item but would welcome any thoughts you might have on such a set up. I am not into HD or the like, so the picture quality needs only to be watchable, not HD. I don't want to have to set up seperate cables to feed the audio on each TV. Thanks in advance!

    Read the article

  • Using WDS to make a router act like a makeshift signal booster

    - by cornjuliox
    I've got a router that supports WDS, and I was wondering if I could use it to help extend the range of an existing wireless router? The PC I'm using right now is just barely within the signal range of a wireless router, and the signal is rather weak so I moved my wireless USB adapter away from the computer using a USB extension cord and used a pie tin + some packing tape + a stack of books and a tall wooden stand to make a sort of reflector dish. Sometime in the future I'd like other PCs to be able to connect wirelessly but with the way things are set up I can't move any farther from this spot or I lose the signal entirely. Can I use WDS to bridge the two networks together both to increase the range of the first network and allow computers connected to the 2nd router to share internet access?

    Read the article

  • Is there a server distro with the capability of syncing live data to multiple machines?

    - by Adam Hart
    Scenario: I have a main server that is used for pagebuilding/storing master data, and is accessed by a few clients on site. This company also has multiple branches with their own server that that connect to locally, but need to work with all the same data, and have it synchronized across all servers in real (or close) time. Is there a way/specific server OS that can sync live data across all of these servers? These servers would also need to be able to: Configure AFP, FTP, CIFS, SMB Continue to host their web server and database server in a Microsoft environment, but move the file server off to commodity hardware Just wondering if this is even possible.

    Read the article

  • ESXi boot time with 9 iSCSI targets

    - by Myles Gray
    Our ESXi hosts have always been slow booting when it came to iscsi_vmk loaded successfully - sitting here for almost 5 minutes. In all a full server reboot takes almost 12 minutes. We have 9 iSCSI targets per host (5 SANs with redundant interfaces) configured as dynamic discovery targets. Has anyone experienced this? Can it be remedied with static discovery mode? Are there any debug steps we can work through to help diagnose this? (All our targets are accessible at boot so i'm assuming the host isn't stuck retrying to connect to a target)

    Read the article

  • help setting up an IPSEC vpn from my linux box

    - by robthewolf
    I have an office with a router and a remote server (Linux - Ubuntu 10.10). Both locations need to connect to a data supplier through a VPN. The VPN is an IPSEC gateway. I was able to configure my Linksys rv42 router to create a VPN connection successfully and now I need to do the same for Linux server. I have been messing around with this for too long. First I tried OpenVPN, but that is SSL and not IPSEC. Then I tried Shrew. I think I have the settings correct but I haven't been able to create the connection. It maybe that I have to use something else like a direct IPSEC config or something like that. If someone knows of a way to turn the following settings that I have been given below into a working IPSEC VPN connection I would be very grateful. Here are the settings I was given that must be used to connect to my supplier: Local destination network: 192.168.4.0/24 Local destination hosts: 192.168.4.100 Remote destination network: 192.167.40.0/24 Remote destination hosts: 192.168.40.27 VPN peering point: xxx.xxx.xxx.xxx Then they have given me the following details: IPSEC/ISAKMP Phase 1 Parameters: Authentication method: pre shared secret Diffie Hellman group: group 2 Encryption Algorithm: 3DES Lifetime in seconds:28800 Phase 2 parameters: IPSEC security: ESP Encryption algortims: 3DES Authentication algorithms: MD5 lifetime in seconds: 28800 pfs: disabled Here are the settings from my attempt to use shrew: n:version:2 n:network-ike-port:500 n:network-mtu-size:1380 n:client-addr-auto:0 n:network-frag-size:540 n:network-dpd-enable:1 n:network-notify-enable:1 n:client-banner-enable:1 n:client-dns-used:1 b:auth-mutual-psk:YjJzN2QzdDhyN2EyZDNpNG42ZzQ= n:phase1-dhgroup:2 n:phase1-keylen:0 n:phase1-life-secs:28800 n:phase1-life-kbytes:0 n:vendor-chkpt-enable:0 n:phase2-keylen:0 n:phase2-pfsgroup:-1 n:phase2-life-secs:28800 n:phase2-life-kbytes:0 n:policy-nailed:0 n:policy-list-auto:1 n:client-dns-auto:1 n:network-natt-port:4500 n:network-natt-rate:15 s:client-dns-addr:0.0.0.0 s:client-dns-suffix: s:network-host:xxx.xxx.xxx.xxx s:client-auto-mode:pull s:client-iface:virtual s:client-ip-addr:192.168.4.0 s:client-ip-mask:255.255.255.0 s:network-natt-mode:enable s:network-frag-mode:disable s:auth-method:mutual-psk s:ident-client-type:address s:ident-client-data:192.168.4.0 s:ident-server-type:address s:ident-server-data:192.168.40.0 s:phase1-exchange:aggressive s:phase1-cipher:3des s:phase1-hash:md5 s:phase2-transform:3des s:phase2-hmac:md5 s:ipcomp-transform:disabled Finally here is the debug output from the shrew log: 10/12/22 17:22:18 ii : ipc client process thread begin ... 10/12/22 17:22:18 < A : peer config add message 10/12/22 17:22:18 DB : peer added ( obj count = 1 ) 10/12/22 17:22:18 ii : local address 217.xxx.xxx.xxx selected for peer 10/12/22 17:22:18 DB : tunnel added ( obj count = 1 ) 10/12/22 17:22:18 < A : proposal config message 10/12/22 17:22:18 < A : proposal config message 10/12/22 17:22:18 < A : client config message 10/12/22 17:22:18 < A : local id '192.168.4.0' message 10/12/22 17:22:18 < A : remote id '192.168.40.0' message 10/12/22 17:22:18 < A : preshared key message 10/12/22 17:22:18 < A : peer tunnel enable message 10/12/22 17:22:18 DB : new phase1 ( ISAKMP initiator ) 10/12/22 17:22:18 DB : exchange type is aggressive 10/12/22 17:22:18 DB : 217.xxx.xxx.xxx:500 <- 206.xxx.xxx.xxx:500 10/12/22 17:22:18 DB : c1a8b31ac860995d:0000000000000000 10/12/22 17:22:18 DB : phase1 added ( obj count = 1 ) 10/12/22 17:22:18 : security association payload 10/12/22 17:22:18 : - proposal #1 payload 10/12/22 17:22:18 : -- transform #1 payload 10/12/22 17:22:18 : key exchange payload 10/12/22 17:22:18 : nonce payload 10/12/22 17:22:18 : identification payload 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v00 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v01 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v02 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v03 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( rfc ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports DPDv1 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is SHREW SOFT compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is NETSCREEN compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is SIDEWINDER compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is CISCO UNITY compatible 10/12/22 17:22:18 = : cookies c1a8b31ac860995d:0000000000000000 10/12/22 17:22:18 = : message 00000000 10/12/22 17:22:18 - : send IKE packet 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 ( 484 bytes ) 10/12/22 17:22:18 DB : phase1 resend event scheduled ( ref count = 2 ) 10/12/22 17:22:18 ii : opened tap device tap0 10/12/22 17:22:28 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:38 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:48 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:58 ii : resend limit exceeded for phase1 exchange 10/12/22 17:22:58 ii : phase1 removal before expire time 10/12/22 17:22:58 DB : phase1 deleted ( obj count = 0 ) 10/12/22 17:22:58 ii : closed tap device tap0 10/12/22 17:22:58 DB : tunnel stats event canceled ( ref count = 1 ) 10/12/22 17:22:58 DB : removing tunnel config references 10/12/22 17:22:58 DB : removing tunnel phase2 references 10/12/22 17:22:58 DB : removing tunnel phase1 references 10/12/22 17:22:58 DB : tunnel deleted ( obj count = 0 ) 10/12/22 17:22:58 DB : removing all peer tunnel refrences 10/12/22 17:22:58 DB : peer deleted ( obj count = 0 ) 10/12/22 17:22:58 ii : ipc client process thread exit ...

    Read the article

  • Synergy client drops and reconnects at UAC dialog

    - by sidran32
    I've been using Synergy for a while at work to connect my XP machine (the host) to my Win 7 laptop (the client). I previously was having issues with using Synergy and the UAC prompt, as described in this question, and have had no issues since, until recently. I upgraded to Synergy 1.4.10 and now am seeing odd behavior whenever a UAC prompt appears on my laptop. When the UAC prompt appears on my laptop, Synergy momentarily drops its connection to my laptop, causing my mouse and keyboard focus to revert to my host machine (the XP machine). After about a second or so, though, the connection gets re-established and I am able to type and use the mouse buttons in the UAC prompt. Once the prompt clears, the connection drops again for a second, and then gets re-established again. Is this something to do with configuration or perhaps should I just chalk it up to a change in behavior in version 1.4.10?

    Read the article

  • Printer server drivers for Samsung ML printer series

    - by drpcken
    I have a Printer Server running server 2008. I'm trying to setup some Samsung ML printers on it (ML-3050, 2150 and 2570 printers). The print server is server 2008 and all my clients are Windows 7 x86. I just never know which drivers to get for the server. On the site they have Universal, PCL5 and PCL6, PostScript, and SPL drivers. From what I've read PS is the best right? I just have problems getting them installed on the server and having clients connect. Which driver type is the best?

    Read the article

  • How can I use my laptop's monitor as my PC's ONLY monitor? [closed]

    - by Randell
    Possible Duplicate: Can I use my laptop as a second monitor for my desk computer? My PC's monitor just died and I'm not looking at buying a new monitor anytime soon. So I'm thinking of using my laptop's monitor for it. Both machines are running on Fedora linux. Edit: Both machines are connected to the same wireless network. PC needs to log in before it can connect to the network if I'm not mistaken. Update: This is different from Can I use my laptop as a second monitor for my desk computer? , because that question is asking how to use the laptop screen as the secondary display, not as the only display.

    Read the article

  • does ubuntu 11.10 is support ns2.29

    - by nasser
    I need your help, I'm a beginner on NS2 , and I'm trying to install ns2.29 on ubuntu 11.10 32bits but i can't. This message appear and installation stopped : Build tcl8.4.11 ============================================================ loading cache ./config.cache checking whether to use symlinks for manpages... no checking whether to compress the manpages... no checking whether to add a package name suffix for the manpages... no checking for gcc... gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking for building with threads... no (default) checking if the compiler understands -pipe... yes checking how to run the C preprocessor... gcc -pipe -E checking for sin... no checking for main in -lieee... yes checking for main in -linet... no checking for net/errno.h... no checking for connect... yes checking for gethostbyname... yes checking how to build libraries... static checking for ranlib... ranlib checking if 64bit support is requested... no checking if 64bit Sparc VIS support is requested... no checking system version (for dynamic loading)... ./configure: 1: Syntax error: Unterminated quoted string tcl8.3.2 configuration failed! Exiting ... Tcl is not part of the ns project. Please see www.Scriptics.com to see if they have a fix for your platform. Anyone can help me?

    Read the article

  • How to disconnect a running bash job from the shell in Linux?

    - by raven
    I have a script that starts a server on a remote VM. All works great until I close the shell where I executed the script. When the shell closes, so does the server. After some looking around I found the following: & will send the job to the background when executed with the symbol disown -h will disconnect the job from the shell and allow it to run regardless of the shell. The command I used is: ./startServer.sh nasb_wxscat160_catalog-4.1.6 1.0.8 > catalog-log.txt & disown -h When I closed the shell and checked using ps -ef | grep java to see if the job is still working I did see it in the list. However when I tried to connect to the server it was unresponsive. On deeper inspection, the log file was filled just until I closed the shell and using the ps -m flag I say the process jobs were not working. Has any one encountered some thing of this sort?

    Read the article

  • SAN shows as unallocated in Windows Server

    - by Gareth Ferneyhough
    Hello. We have a SAN drive that shows as unallocated in Windows Server 2008. I believe it is a raid 10 with 4+ disks. The disks are in good health. I think a server that we rebuilt tried to connect to the drive and re-initialized them, or re-wrote the partition table. (excuse my poor terminology). We ran TestDisk on the drive and it shows no partitions, so now we are doing a quick search (which is not so quick). Can anyone else suggest anything? Thanks, Gareth

    Read the article

  • dd-wrt Bonjour/ netbios etc on two subnets

    - by user72182
    Hi I was wondering if any clever people out there could help me. I have a network setup with two different subnets 192.168.1.0 and 192.168.0.0 one router is connected to a VPN (via OpenVPN) the other is not. Both routers have static routes to each other and a device on one can communicate to another without issues when using IP addresses. My problem is I want to use services like Bonjour, Netbios and Apple Talk across the two networks, which currently does not work. A laptop connected on one subnet will not see a laptop connected on another. Is there anyway that you can connect the two networks together so these sort of local service will work??? I guess I have to forward the boardcast packets but I have no idea how to do this. Thanks for any help...

    Read the article

  • Make own dial-up ISP using broadband connection [on hold]

    - by SkylarMT
    So, I see no reason why this wouldn't be possible. I have a Linux server (a Raspberry Pi to be exact) connected via Ethernet to a broadband ISP. I want to be able to dial a number, have it go through the normal telephone network, onto the Internet via a VoIP provider (I know you can call a Skype user from a landline), to my Raspberry Pi, and then have the Pi connect me to the Internet. I've found guides on making your own ISP, but they all involve a dedicated phone line on the server end. Is there a way to do this with no modem on the server end? I live in an area with a lot of people still on dialup, and if I pull this off I could make some extra money. Thanks!

    Read the article

  • Security Issue in LinkedIn &ndash; View any 3rd profile without a premium account.

    - by Shaurya Anand
    Originally posted on: http://geekswithblogs.net/shauryaanand/archive/2013/06/25/153230.aspxI discovered this accidently when my wife forwarded a contact on LinkedIn from her tablet, using the mobile interface of the website. On opening the contact on my desktop, I was surprised to see, I need to upgrade my account to view the contact. Doing some research along with my wife, I found this simple security vulnerability from LinkedIn that can let anyone view a contact’s full profile even when you have a “not upgraded” LinkedIn account and that the contact is a “3rd + Everyone Else”. Here’s an example of what I am talking about. I just made a random search on LinkedIn for a contact whose name starts with Sacha. Do note, this is just a walkthrough and I am not publicizing any Sacha. I check the “3rd + Everyone Else” and find a “LinkedIn Member”. On clicking this person’s profile to view, I am presented with the following page, asking me to upgrade. Make a note of this page’s web address and you get the profile id from it. For example, for this contact, the page address is: http://www.linkedin.com/profile/view?id=868XXX35 The Profile Id for this contact is 868XXX35. Now, open following page where the Profile Id is the same as the one we grabbed a moment earlier. https://touch.www.linkedin.com/?#profile/868XXX35 The mobile page exposes this contact information and you even get the possibility to connect to this person without an introduction mail (InMail). I hope someone from LinkedIn sees and issues a fix for this. I am pretty sure, it’s something that they don’t want the user to do without purchasing an upgrade package.

    Read the article

  • 14540059 - UPDATE FOR BI PUBLISHER ENTERPRISE 11.1.1.6.0 AUGUST

    - by Tim Dexter
    Its been a while, I know :( I have posts in the pipe just gotta smoke em out! The latest update for BIP 11.1.1.6 was released last week. A bunch of defects have been addressed as you can see below.  13473493 - XMLP TRANSLATION ISSUE OF MILLION (ENG) TO MILLIONES (SPANISH) 13521951 - BIP UPGRADE FROM 10G TO 11.1.1.5.0 IS NOT SUCCESSFULL FOR TIAA-CREF  12542914 - ACC: REPORT VIEWER STRUCTURE HAS ERRORS - NO IFRAME AND NO LANG ATTRIBUTE  13562801 - XML TAG DISPLAY SHOULD DEFAULT TO 'FOLLOW THE DATA 13568043 - BIP QUERY FAILING VALIDATION DUE TO 'COALESCE' KEYWORD 13592901 - THE REPORT IS THROWING AN SQL ERROR THAT REFERENCES CHECKING FOR NULL VALUES 13836696 - BI PUBLISHER REPORT NOT GENERATED WHEN A TEXT FIELD START WITH "E.<SPACE>"  13879206 - DM MIGRATION ISSUES 13888939 - DM: LOV SEARCH CAUSING DB CONNECTION LEAK 13904225 - XSLX ERROR DUE TO URL LINK AND USE OF LIST 13930795 - RTF TEMPLATE GIVING DIFFERENT RESULTS IN DIFFERENT  13942064 - XDOEXCEPTION THROWN WHEN RUNNING PEOPLESOFT TEMPLATES AND XML FILE 13981523 - BI PUBLISHER ON 64-BIT WINDOWS CAN'T CONNECT TO MS ANALYSIS SERVICES CUBE 14039229 - BIP 11.1.1.5.0 REPORTS ARE NOT WORKING ON BIP 11.1.1.6.0  14055793 - BIP 11.1.1.6.0: DATE TYPE INPUT PARAMTER IS NOT DISPLAYING THE CORRECT VALUE USI  14059851 - UNABLE TO GRANT PRIVILEGES TO ROLE: DOMAIN USERS; THE ROLE DOES NOT EXIST 14109967 - LARGE OUTPUT CAUSES OUT OF MEMORY DUE TO LEFT OVER DEBUG CODE 14163973 - ISSUES USING DATA MODEL EDITOR IN BIP 11.1.1.6  14167915 - ORG.XML.SAX.SAXEXCEPTION: DATE FORMAT CANNOT BE NULL  14240045 - EDITING SCHEDULED REPORTS DOES NOT REFLECT VALID VALUES FOR UPGRADED SCHEDULES 14304427 - SEARCH DIALOG NOT BINDING PARAMETER VALUE - INVALID PARAMETER BINDING(S). 14338158 - PASSWORD FIELD SHOULD NOT BE DISPLAYED FOR FMW SECURITY MODEL 14393825 - OBIEE11G: LARGE NUMBER OF OBIPS SESSIONS CREATED WHEN USING SSO AND BI PUB 14558377 - CONT. BUG 14240045:EDITING SCHEDULES IN BI PUBLISHER IS DEFAULTING TO 'ALL' This patch is just for BI Publisher standalone installs. For those of you using BIP within the wider BIEE suite there is the 11.1.1.6.2 BP1 patchset. More details on that here.

    Read the article

  • Reproducible freezes with on an AMD fusion (e350) sony vaio

    - by doycho
    So a week ago I bought it and I've been struggling to make the Ubuntu which I installed stable. There's one thing that makes my life miserable, though. There's this easily reproducible freeze when I start some kind of video. So here is what happens: Everything works fine for some time I start vlc/mplayer/flashplayer/totem with something to watch In few minutes time I lose the sound (nothing in the logs at this point) At that time the video app instantly allocates all the memory and its CPU usage skyrockets. Total freeze. I can move the cursor around for few seconds and sometimes even switch to another app. But ultimately there comes the time I can't do anything - can't kill X with ctrl+alt+backspace (I have it enabled), can't switch to any other console (ctrl+alt+f1-6), can't connect to the machine via ssh. The only way to restart it is the ctrl+alt+SysRq+UABI magic :) What discourages me most is the fact I can't see anything in the logs. The only error I've noticed is Jun 19 17:00:37 serenity kernel: [ 1506.350676] software-center[17581]: segfault at 30 ip 00007fd3631b814c sp 00007fff18a6fa10 error 4 in libgtk-x11-2.0.so.0.2400.4[7fd362f7d000+436000]. I've been searching through the Xorg log, kernel logs, syslog. If you have any idea how I can get more debug info I'll be glad to try them. Things I've tried: Changing drivers - the open source one, the proprietary driver xorg-edgers' ppa - https://launchpad.net/~xorg-edgers/+archive/ppa changing to the last stable kernel (2.6.39) Some notes: It my be irrelevant but the sound is constantly stuttering. This probably is a separate issue though I've found that if I start more video/sound apps the freeze happens faster.

    Read the article

  • Using SSLv3 - Enabling Strong Ciphers Server 2008

    - by Igor K
    I've disabled SSLv2 and SSLv3 is on. However I cannot connect to a remote server which fails with The client and server cannot communicate, because they do not possess a common algorithm Ran an SSL check (http://www.serversniff.net/sslcheck.php) on the remote server and ours, and noticed none of the ciphers they accept we have on our server. How can this be configured? (Windows Web Server 2008) Remote Server Accepted SSL ciphers: DHE-RSA-AES256-SHA AES256-SHA EDH-RSA-DES-CBC3-SHA DES-CBC3-SHA DHE-RSA-AES128-SHA AES128-SHA Our server by default accepts: DES-CBC3-SHA RC4-SHA RC4-MD5

    Read the article

  • Coffeeshop limits Internet connection to 30 minutes -- how does it recognize me if I delete my cooki

    - by Andrew
    I was connected to the Internet in a coffeeshop earlier today, but I was only allowed 30 minutes of access. I tried deleting my cookies after my time was up (though admittedly I didn't delete my Flash cookies -- would that have solved the problem?), but the connection still recognized that I'd already used 30 minutes, so I couldn't connect again. How did the connection recognize me still? The wireless was unprotected (no code or password), it just had a portal you had to pass through upon the initial connection. I'm not terribly familiar with web development or computer networks, so just trying to get a better idea of what's happening (and possibly to know what to do next time I use up my minutes =)).

    Read the article

  • Connecting two pcs through cable, at the same time as wireless

    - by Steffen
    I've got 2 pcs setup with WLAN - however when I copy files between the machines it takes forever (obviously, since I run 801.11g). So I thought, why not just connect them directly with a cable (my wireless router is the other end of the house, that's why I don't use cables to that) However how should I configure the LAN connection on each machine, so I can use it for transferring files between them, whilst using my WLAN to access the Internet ? I was thinking about letting one machine be gateway, but then Windows pops up with a lot of warnings (basically it says this won't work when you're using two disjoint networks) And now I'm at a loss as to what to try.

    Read the article

  • Basic questions about network topologies

    - by laoshanlung
    I have just started learning about network topologies, but there are a lot of confusion about different types of network topologies i have learnt so far. First of all, BUS topology. If i have like 100 PCs in the same wire connected using BUS topology, and the network connection speed is 100Mbps, then each PC will have a connection of 1Mbps, right ? With the same scenario, if i connect those 100 PCs using STAR topology, then each PC will have a connection of 100Mbps ? Then with the TREE topology, i divide the system into 10 sub-system (10 tree branches) , each branch has 10 PCs, then i will have other 10 small "BUS-topology" networks each one will have a connection of 10Mbps and therefore each PC will also have 10Mbps ? And the last one is RING topology, 100 PCs, each PC will have 100Mbps connection ?

    Read the article

  • Ubuntu 11.04 does not detect my tata photon +

    - by nikhil
    I am trying to connect to the Internet via my photon+ from the past day and have tried various suggestions on the Internet and have tried to zero in to the main cause of the problem which is that my device is not detected. I have tried the following ways: 1) After connecting the device, I tried to create a mobile broadband connection via System Preferences Network Connections and selected tata photon plus. But there was no connection. 2) I did sudo apt-get install usb-modeswitch-data and sudo apt-get install usb-modeswitch But the prompt said that they are at their newest version. 3) I tried to edit the file sudo gedit /etc/usb_modeswitch.d/12d1:1446, but this file did not exist. 4) my lsusb output is nikhil@nikhil:~$ lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 003: ID 22f4:0021 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Any Ideas ??

    Read the article

  • iSCSI - what's faster?

    - by Unplugme71
    I have a DroboPro that is currently connected to a GS748TS switch. Also connected to the switch is a server and few workstations. Which method would be better in performance? Add a NIC to the server. Direct connect the DroboPro via iSCSI to the new NIC. Add a NIC to the server. Create a dedicated VLAN for the new NIC and Drobo. Add a NIC to the server and attach it to a separate switch. DroboPro connects to the switch. Becomes a private network, similar to a VLAN. DroboPro has a single ethernet connection. Server has a single ethernet connection (currently). Workstations each have a single ethernet connection.

    Read the article

  • dell vostro 1000 broadcom wireless connection

    - by lorrenuy
    I have a problem with the hardware broadcom wifi. I press the hotkey fn+f2 to activate the hardware and this will not work. I'll look at the drivers but it appears to be installed. How can I solve this problem? Ubuntu is all new to me so if possible, give me a clear explanation. Now do I connect the lan cable. I use the Ubuntu 11.10 lawrence@lawrence-Vostro-1000:~$ sudo lshw -class network [sudo] password for lawrence: PCI (sysfs) *-network description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:c0200000-c0203fff *-network description: Ethernet interface product: BCM4401-B0 100Base-TX vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: eth1 version: 02 serial: 00:1c:23:a2:b9:a9 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.1.18 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:21 memory:c0300000-c0301fff lawrence@lawrence-Vostro-1000:~$ lawrence@lawrence-Vostro-1000:~$ rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

    Read the article

  • How to find ip address of my Asus RT-AC86U in Access Point mode?

    - by WilliamKF
    I'm using an Asus wireless router model RT-AC68U and can connect fine to the internet using it wirelessly. I configured the router to be an Access Point, but having done so, I can no longer locate the GUI to adjust the router as I have no idea what its IP Address is anymore. The router is plugged into a cable modem and router which is a model SMCD3G is a business class gateway labeled Comcast Business IP Gateway. This gateway is assigning ip addresses in the range 10.1.10.XX and I went to the web interface at 10.1.10.1 and listed the connected devices and see my laptop which is connected to the Asus access point along with a few other devices, but none of the devices listed are the Asus router (I tried all the six ip addresses listed). How can I determine the IP Address of my Asus router in access point mode so I can see the GUI interface again to control the router other than by doing a factory reset?

    Read the article

< Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >