Search Results

Search found 21456 results on 859 pages for 'video memory'.

Page 385/859 | < Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >

• How do I enable greedy MigrationHeuristic in Karmic?

  - by Matthew

  My laptop performs very poorly for 2d graphics. For example, Docky's zoom effect and compiz effects are very choppy. In Jaunty, I was able to fix this by adding the following line under the "Device" section in my xorg.conf: Option "MigrationHeuristic" "greedy" In Karmic, there is no xorg.conf by default, so I copied my old one (from Jaunty). However, everything is still slow. Here is my xorg.conf: Section "Device" Identifier "Configured Video Device" Option "MigrationHeuristic" "greedy" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection From googling about, it sounds like "MigrationHeuristic" is only an option for the "EXA" mode, while Karmic has switched the intel driver to "UXA". So I tried adding this line under the "Device" section: Option "AccelMethod" "exa" But this didn't help.

  Read the article

• How to create a virtual audio device and stream audio input with it

  - by Steven Rosato

  Is it possible to create another audio device and redirect only wanted input streams to it? Here's my concrete problem: I am broadcasting a game via XFire and it uses the Windows audio device to capture any audio I receive. As I am broadcasting, other users who watch the video stream are communicating with me over Skype, and they hear themselves back within the video stream and it is entirely logical since I am broadcasting the audio I hear. What I want to do is create another audio device within Windows and redirect (pipe) ONLY the audio input from that game and not the input reveived from Skype. I would then tell XFire to use that newly created "virtual" audio device to broadcast and therefore my partners won't hear themselves back. Is there any software that can do that or can it be achieved natively with Windows? (I am under Windows 7).

  Read the article

• Screencapturing on linux?

  - by donuts

  What is the recommended screen capture (video, like for a screen cast) program to use on linux (specifically, backtrack)?

  Read the article

• Unable to create context rendering error whet run OpenGL application

  - by Rodnower

  Hello, I try to run Mesa gears example and I get following error: freeglut (./gears): Unable to create direct context rendering for window 'Gears' This may hurt performance. though the application runs successfully, but I guess that in future I will have much problems with productivity. I run Linux CentOS 5 on WMvare 7. Mesa's version is 6.5 Relevant output of lspci -v gives: 00:0f.0 VGA compatible controller: VMware SVGA II Adapter (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter Flags: bus master, medium devsel, latency 64, IRQ 9 I/O ports at 10d0 [size=16] Memory at d0000000 (32-bit, non-prefetchable) [size=128M] Memory at d8000000 (32-bit, non-prefetchable) [size=8M] [virtual] Expansion ROM at 30000000 [disabled] [size=32K] Capabilities: [40] Vendor Specific Information Any one have idea? There is driver of vmvare for CentOS? Thank you for ahead.

  Read the article

• Mother Board Question

  - by user33931

  1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

  Read the article

• Dumping a Linux console scrollback buffer?

  - by Gerald Combs

  We would like to save the output of a program run on a Linux console which spans many lines. Unfortunately it wasn't logged or run under screen, or any other way that lets us easily capture the output. The best method we've been able to come up with so far is: Log into the machine via a separate SSH session In the console session, page to the top of the buffer Repeat: In the SSH session, run "cat /dev/vcs >> screendump.txt" In the console session, page down one screen Dump the final screen in the SSH session Is there a better way? It seems like if the VC memory were contiguous and you knew where it was you could use dd to pull the console text directly out of kernel memory and into a file.

  Read the article

• Display won't come back from power saver mode

  - by tynor

  I wan't sure where exactly to post this question, but this one seemed the most relevant. I have a Dell LCD monitor running off a Dell Inspiron 531 tower with an Nvidia GeForce 8600 GT video card. Just recently, when I turn my computer on, the display immediately enters its "Power Saver" mode, and never wakes up. This problem doesn't occur with other computers, or even with this same computer when I use the integrated graphics. I have no other displays to test the card on. I have also tried replacing the power supply (my original one, which ran that video card for 4 years, was 300w, and I replaced it with 500w). Is there anything else I can try to troubleshoot this issue?

  Read the article

• Download - Upload is too slow on Centos

  - by Mehdi

  My download/upload in server and out of server is too slow (around 50 KB/s !) ! Did I miss some configuration ? Some information: CentOS release 6.3 uptime load average: 0.17, 0.32, 0.37 Memory free -m total used free shared buffers cached Mem: 24009 21988 2021 0 806 18098 -/+ buffers/cache: 3083 20926 Swap: 4095 28 4067 lshw -C network *-network description: Ethernet interface product: 82574L Gigabit Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 00 serial: 00:25:90:70:17:4a size: 100MB/s capacity: 1GB/s width: 32 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=off broadcast=yes driver=e1000e driverversion=1.9.5-k duplex=full firmware=2.1-2 ip=108.175.8.123 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:16 memory:fb900000-fb91ffff ioport:e000(size=32) memory:fb920000-fb923fff ethtool ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off MDI-X: off Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000001 (1) Link detected: yes dmesg |grep e1000e dmesg |grep e1000e e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:02:00.0: Disabling ASPM L0s e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:02:00.0: setting latency timer to 64 e1000e 0000:02:00.0: irq 33 for MSI/MSI-X e1000e 0000:02:00.0: irq 34 for MSI/MSI-X e1000e 0000:02:00.0: irq 35 for MSI/MSI-X e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:70:17:4a e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: eth0: Unsupported Speed/Duplex configuration e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: Disabling ASPM L1 e1000e 0000:02:00.0: eth0: changing MTU from 1500 to 9000 e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO

  Read the article

• Jerky animation on window open/close

  - by Jan Zich

  Today, I received and installed Windows 7, and one of the first (slightly) annoying things I noticed is a visible jerk when opening of closing new windows. When I minimize or maximize already running window, the animation is smooth from beginning to end, but when I start a new program, it seems that just at the end of the animation Windows thinks for a fraction of a second. It is a bit distracting; especially since Windows 7 seems to be overall more responsive than Windows Vista. Does anybody has the same experience? Could it, for instance, a 64bit version specific issue (just in case)? I upgraded Vidia drivers, and even though my video card is not capable running latest games, it should be able to handle this (since it was OK in Vista, and since it does not look like a video issue).

  Read the article

• backing up a virtual machine

  - by ErocM

  I inquired with the support of justcloud.com telling them that I have a vmware vm that I was wondering if it could be backed up while in use. I can back up the vm once it is shut down but I was wondering if their "shadow copy" would back it up while running. This was their response: Thank you for your email. I am really very sorry but virtual machines can't be backed up for a simple reason that they are virtual, they have virtual memory, not physical memory. Please let me know if there is anything else I can help with. Kind Regards, Barry James User Experience Team www.justcloud.com These are physical files so I wasn't sure I even understood the response. Am I wrong in thinking that a vm can be backed up while in use? Does this response even make sense? I need a cheap alternative to backing up the vm off the server in case it goes down. Any suggestions?

  Read the article

• Server 2008 Hard Faults

  - by claw

  Hey all, plase bear with me as I haven't looked at a server in a very long time. The problem I am having is with a Windows 2008 Standard FE Service Pack 2 Intel Xeon X3430 @ 2.40 2.39 GHZ 4 GB Memory 64 Bit There seems to be no problems other than the physical memory peaking at 91%, always with over 100 Hard Faults Per Second. To my understanding hard faults should be fairly rare on a machine with. Are there any logs I can show you? Or investigate myself. The general performance of the machine is ok, i can access SBS2008 and change settings fairly smoothly without hangs etc. However, we connect to the server and do quite a bit of SQL via an application. For a record to retrieve say 20 rows, it can take 20+ seconds. Thanks in advance, Jamie EDIT: What the server is used for: IIS ASP Web Service SQL 2008 List item Exchange unable to upload screenshots due to low reputation - why doesnt my SO work here :)

  Read the article

• map based on specific type of stream

  - by Steven Penny

  Consider the following file Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'infile.mp4': Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 1920x1038 Stream #0:1(eng): Audio: aac (mp4a / 0x6134706D), 48000 Hz, 5.1, fltp, 386 kb/s Stream #0:2(eng): Audio: aac (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 124 kb/s I would like to run a command that uses the video and only the stereo audio. With this particular file I could just run ffmpeg -i infile.mp4 -c copy -map v -map :2 outfile.mp4 However this will not work if the audio streams are switched. How can I tell FFmpeg to use the 2 channel audio only?

  Read the article

• Shared SQL Server 2008

  - by nazaf

  Hi, I have a Windows Hyper VPS plan with 1024 MB of RAM. After installing SQL Server 2008 Express, my memory usage went up to 75% without running my site yet. I know that SQL Server consumes a lot of memory, so I decided to host my DB on a shared server. Which of the following is more scalable: install my DB on my VPS, or on a shared server ? If the latter, then can you recommend me a good shared server? Thanks.

  Read the article

• How can I make Windows Media Player ignore global hotkeys in Windows 7?

  - by schnapple

  I have Windows 7 and a Logitech G15 keyboard. One of the programs with the Logitech G15 allows you to control media players such as Winamp with the playback keys on the keyboard. Problem I'm having is that, even though I have told this program to not control Windows Media Player, every time I use it to pause Winamp, it then hits plays (or unpauses) Windows Media Player. Even more annoying given that Windows Media Player isn't even running as an active GUI program and instead as a background process, so I hear the sound of whatever the last video it was I playing. If I end-task wmplayer.exe it spins right back up but at least now it has no knowledge of a video to play, but this is annoying. How can I either a) Have Windows Media Player in Windows 7 completely unload when I close it, or b) Have Windows Media Player in Windows 7 ignore any sort of global hotkeys?

  Read the article

• HD movies stutter.

  - by Absolute0

  I just put together a new system build in the hopes that all of my daily tasks would run smoothly and without any hiccups. Unfortunately I am still seeing some sound and sometimes video stuttering when playing HD movies in VLC (no problems with xvid/divx files). My setup is as follows: Intel core i5 750 quad core 2.66mhz 4GB ram asus p55 motherboard radeon hd 5570 video card 650gb 7200rpm western digital sata HDD 23" Nec ea23wmi monitor Operating System: Windows 7 What might be the main bottleneck that needs upgrading to fix my delays? Seems like the hard drive might be the problem but anything faster than 7200rpm is beyond my budget for a decent hard drive. Could it be anything else?

  Read the article

• Flash player, HD videos and games are choppy

  - by Aimad Majdou

  I have a problem with flash player. HD videos from Youtube or Vimeo and flash games do not play smoothly. I'm using Flash player 11, Windows 7 Sp1, and my graphic card is Intel GMA 4500. Device Manager shows me that all drivers are installed on my computer, so i don't have any problems with drivers. When I run Google chrome, Resource Monitor shows me 15% ~ 40 % of CPU Usage and 40% used Physical Memory, but when I watch a video on Youtube or play a Flash game, the Resource Monitor shows 70% - 90% CPU Usage. Also, when I run some HD Video (Frame width : 1920, Frame height : 1080) on my computer, Device Manager shows me 80% ~ 100% of CPU Usage. before I Reinstall Windows 7, HD Videos and flash games were play smoothly I hadn't any problem with them !! I hope all these informations are enough to answer my question.

  Read the article

• Stuck in power saving mode

  - by sazabi02

  I've got an LG monitor I tried attaching to my laptop for dual monitor goodness and it worked fine but when I tried attaching it back to the desktop it stuck in "Power Saving mode" and wouldn't go away. The CPU's starting up but nothing happens with the monitor. I try attaching it back to the laptop and it works fine again. I don't understand what could have happened. For reference, the laptop I'm using is an HP laptop with nVidia GT240M video card running on an i7 processor while the desktop runs on a Dual Core processor with an nVidia 9400GT video card. I've never had problems like these with other monitors I've attached my pc to. Anyone got any ideas?

  Read the article

• Mini-DisplayPort to HDMI Adapter Sound Stopped Working

  - by jimdrang

  I have cancelled cable and want to watch the NCAA tournament games on my TV tonight through my 2011 Macbook Pro where I can stream the game in a browser. I have a cheap Mini-DisplayPort to HDMI converter that I have connected to my TV in the past and had no issues with audio or video, the problem is the audio has stopped working since the last time I used it a few months ago and now just keeps playing through the laptop speakers, but the video works fine. Everything with my setup is the same and when I try to force the audio output to the TV in the Audio system settings, my TV is not listed as an output option at all. I have tried various combinations of power cycling, replugging-in both devices and making sure the TV options are set properly to receive audio through HDMI but no luck. Anyone know what the issue could be?

  Read the article

• how to optimize virtual box shared folders

  - by Nrew

  This is really pissing me off. No matter how much memory I put into the guest os(windows xp). It still hangs for about 365 days before you can access the file you want to access from the shared folder. What do I do to make things faster? Because after it hangs and not respond for 365 days. It will do it again for another 250 days. Ive even set the shared folder to permanent. This is a fairly decent machine: 2.50ghz processor(x64 architecture, but I have only 2Gb of memory so my host os is just 32 bit windows 7) hdd has much space left: 156 Gb free of 250Gb

  Read the article

• Hardware upgrade: Windows 7 bluescreens, Vista loads

  - by Daniel Schaffer

  I just did a fairly significant hardware upgrade while keeping my hard disks. The old system was a dell Optiplex 745 with an Intel Core 2 duo, LGA 775. The new system is custom built, Intel i5 750. I know you're supposed to do a clean install with a hardware upgrade like this, but I'd had success in the past doing the stealth hardware upgrade like this, so I figured I'd give it a shot. Windows 7 Ultimate 64 bit gets through the loading screen and immediately blue screens and reboots. Windows Vista Home Premium 32-bit, which I have on an old hard drive from an AMD box (!!) loads up fine. I ran through the windows memory checker just to be sure, and my memory is fine. So, is the BSOD the result of some sort of protection mechanism specific to Windows 7? Is there any hope of salvaging that install?

  Read the article

• Forgotten laptop windows login - what are my options?s

  - by Galwegian

  I have a (elderly) colleague who has forgotten the password to his laptop - he generally signs in as Administrator, but can't remember the password, and has asked my help. He says the laptop contains some important data. What are my options? Thanks for any help. EDIT: I have just got hold of the machine and not all is as I was told... The password is not the problem... Before the login box appears I get an error message relating to savedump.exe: The instruction at "0x0..." referenced memory at "0x0...". The memory could not be written. Then when I login using the proper credentials, It logs me in for a tiny second and then logs me out again and 'saves my settings'. Any ideas on this one?

  Read the article

• Access Monit on PHP

  - by xian

  i have a remote server (Centos 5.8) and i have installed monit on it as my monitoring tool. monit installation yum install monit now, on my local machine (still Centos5.8), i want to get the system status (shown below) of the said server provided by monit --------------------------------------------------- | Parameter | Value | --------------------------------------------------- | Name | serverHostname | | Status | Running | | Monitoring mode | active | | Monitoring status | Monitored | | Data collected | Fri, 22 Jun 2012 16:47:01 | | Load average | [0.32] [0.37] [0.43] | | CPU usage | 3.3%us 0.2%sy 0.0%wa | | Memory usage | 2005212 kB [53.9%] | | Swap usage | 893256 kB [21.8%] | --------------------------------------------------- This information is shown when you clicked on the system name link found on the your monit's home page http://localhost:2812 How can I do that in php? How can I retrieve those information? i was thinking of executing this linux command in php: /usr/bin/monit status Output of this is The Monit daemon 5.4 uptime: 2h 55m System 'system_asi454' status Running monitoring status Monitored load average [0.22] [0.34] [0.42] cpu 3.3%us 0.2%sy 0.0%wa memory usage 2005212 kB [53.9%] swap usage 892928 kB [21.8%] data collected Fri, 22 Jun 2012 16:47:01 which is similar to the table content show above.

  Read the article

• Is there an iPhone app that lets you download torrents?

  - by alex

  It'd be good if one let you download to it's memory, and then sync to a PC when convenient.

  Read the article

• Another installation is in progress

  - by Steven

  Why I try to install any program I see "Another installation is in progress. You must complete that installation before continuing this one." error. Googled the web and found that solution would be to delete HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress registry key and reboot. That didn't help me unfortunately. When I open "Services" mmc snapin it shows that "Windows Installer" service is "Started", but "Start/Stop/Pause/Restart" buttons are grayed (the interesting thing is that startup type = "Manual", so I don't really know how to explain that I already have 2 instances of msiexec.exe in memory and one instance is consuming 50Mb of memory. Looks like there's a serious issue with my installer service - is there any way to fix it (please do mind - I can't install anything!) Any help would be greatly appreciated.

  Read the article

• What kind of server hardware is roughly necessary to serve website to 10k users?

  - by jcmoney

  I've been looking at VPS's and the specs they offer for entry level setups seems somewhat surprising to me. I'm am new to this topic but many of VPS offer less than 512MB of memory and my laptop has 4GB of memory so I am curious what does it actually take in terms of hardware to serve say 10k users (say 5k daily active users)? I figure a large number of factors can probably sway this a lot but just for benchmarking, say the site is a social networking site written in php using mysql + apache that's not really doing anything unusual like serving lots of media. So essentially a very basic Facebook minus the absurd number of photos and videos. What about 100k users (50k daily active)? 1 million (500k daily active)? Thanks in advance.

  Read the article

< Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >