Search Results

Search found 14015 results on 561 pages for 'extended desktop'.

Page 386/561 | < Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >

• New Seagate GoFlex external hard drive reporting temperature 50C and higher--defective or normal?

  - by rob

  I have a brand-new Seagate GoFlex hard drive, and my SMART diagnostics program (CrystalDiskInfo) is warnings me that the drive is running too hot. The lowest reported temperature I've seen it is 48C, and the highest so far is 56C (all of last week, it was at 50C). According to several sources I've found online, including a Google study, hard disks operating higher than 40C have shorter lifespans. The temperature in the room is usually about 23C (74F), and orienting the drive vertically vs. horizontally doesn't seem to affect the operating temperature. Does anyone else have a GoFlex external desktop drive that runs at 40C or cooler? Is my drive just defective, or is this high temperature common for these drives?

  Read the article

• What is the best file system and allocation size for a USB flash drive?

  - by e-t172

  I'm considering using my 4 GB Kingston DataTraveler USB stick to store my Firefox and Thunderbird profiles for my laptop and desktop PCs. I want to maximize performance when using Firefox. The question is: what is the best file system and allocation size for the fastest Firefox profile operation on a USB flash drive? I'm using Windows 7 on both machines and I don't care about compatibility or the drive's lifetime. I just want to maximize performance. I could even use ext2 with the Ext2 IFS driver if that means it'll be faster. I'm assuming (perhaps I'm wrong) that putting a Firefox profile on a USB stick would be a "lots of small files" usage. In that case, it seems that NTFS would perform best, but I'm not sure. Besides I found nothing regarding the best allocation size to use. Considering that the default allocation size is designed for hard drives (which have different characteristics), I'm assuming that the default allocation size is not the best.

  Read the article

• How To Start NX/VNC Session At Ubuntu Boot Time?

  - by darkAsPitch

  I want an NX or VNC session to start automatically when an Ubuntu server boots up - without a monitor connected - loading a certain user's desktop and keeping it loaded and ready until I log in via NX or VNC. How would one accomplish that? This code works via my terminal when I am logged in as the NX user, but not via root, and not in the init.d folder. No idea why? /usr/NX/bin/nxclient --session /home/user/.nx/config/SavedSession.nxs Please provide somewhat simplified instructions! I am certified linux newb.

  Read the article

• Newbie one: Virtual Networks - Hyper-V - Remote Destktop - Only one phisical NIC

  - by josecortesp

  Hello everyone, I'll try to explain my situation and I'll apreciate any help: I have a phisical server (quad core, 4Gb ram, 1TB raid 10, etc) with Win Server 2008 R2 enterprise, running IIS, Printing, etc... Also, I want to set up 2 virtual Servers with 2008 R2 standart one with SQL Server and the other with Team Foundation. What i need is: Being able to access from inside the private phisical network, to Remote Desktops on each of the Virtual and the phisical Servers Had Access from the outside, using a router and port Forwarding, to the TFS server and the IIS server (one is virtualized, the other is phisical) This is it, but note that I only have one Phisical Nic. How do I configure this to work. When i set up the hyper-v role, on the wizard something like it showed up but I don't remmember what i choose, and right now, I cannot access none of the servers from remote desktop, not even from the phisical private network. Can anybody point me, what can i do? Thanks in advance (sorry 4 my english, i'm a spanish talker and my english isn't that good)

  Read the article

• How Ubuntu cloud version enforces the "no root login" over ssh ?

  - by Maxim Veksler

  Hello, I'm looking to tweak ubuntu cloud version default setup where is denies root login. Attempting to connect to such machine yields: maxim@maxim-desktop:~/workspace/integration/deployengine$ ssh [email protected] The authenticity of host 'ec2-204-236-252-95.compute-1.amazonaws.com (204.236.252.95)' can't be established. RSA key fingerprint is 3f:96:f4:b3:b9:4b:4f:21:5f:00:38:2a:bb:41:19:1a. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'ec2-204-236-252-95.compute-1.amazonaws.com' (RSA) to the list of known hosts. Please login as the ubuntu user rather than root user. Connection to ec2-204-236-252-95.compute-1.amazonaws.com closed. I would like to know where this is setup and how I can change the printed message? Thank you, Maxim.

  Read the article

• Mouse clicks stop working sometimes

  - by AlbertoPL

  I am having a serious issue with my mouse in which it will randomly not be able to click or cause other problems. Here is the breakdown: Sometimes, I can no longer left-click on many of my windows/taskbar (in order to focus them). Even though I can still left click on my desktop icons or the currently active window, I cannot focus any of the others. Other times, when I have a browser open, I will hit to go back one page and it will automatically go forward one page. I know it's a mouse issue because this behavior stops when I unplug the mouse. Things will be fine when I plug the mouse back in, but eventually the behavior starts up again. My mouse is a Razer Diamondback 3G and I am running Windows 7 Professional 32 bit. Any ideas?

  Read the article

• Dual Core or Quad Core CPU for NetBeans/Eclipse development?

  - by cdb

  I am going to buy a new desktop CPU. I am a programmer who mainly uses NetBeans IDE for Java web application development, with GlassFish application server. I went through the discussion regarding Dual Core or Quad Core. My doubt is that software like IDEs (NetBeans, Eclipse, etc., with a server running) may not be written with multiple cores in mind? I am not a game addict... So what is best for me, and which company should I choose, AMD/Intel?

  Read the article

• EloTouch touchscreen suspends correctly but does not come out of standby on Ubuntu 10.04

  - by Ton van den Heuvel

  I am using an EloTouch touchscreen on a minimal Ubuntu 10.04 installation. I have a bare Xserver running without any desktop environment, just an xterm. The touchscreen is working great, but there is still one small problem. As soon as the touchscreen goes to standby, it is not coming out of standby when touching the screen. Using a keyboard or mouse does get it out of standby though. I am looking for any hints or directions to a cause of this problem. Is this an x.org configuration problem? A driver problem? Is this a known problem with touchscreens in general? Any pointers are welcome. The driver I am using is an unreleased EloTouch driver (3.5.0). I received it through a reseller who can not give me any technical information unfortunately.

  Read the article

• Command-line way to send keystrokes to a window open on a different X-session

  - by Sanjay Manohar

  I have a Ubuntu desktop open and logged on, on my main machine. I am then also logging in to this machine from a remote computer, using X2go which creates a new X-session. I have a libreoffice file open on the original session. I want to save this file and close it - but from the remote machine! (Both sessions have same user logged in; I can sudo if needed) I have tried using xdotool search but this fails to find the window. Is there a way to do what I want from this second session? I can see the process with ps -A I can even see the open file with lsof! How can I do a "save-and-close" on it?

  Read the article

• Recycle Bin for Windows Server 2003 File Shares

  - by Joseph Sturtevant

  One of the networks I administrate uses Windows Server 2003 File Shares to provide network storage for users. To prevent against accidental deletion, I use Shadow Copies to create snapshots twice a day. This method is only effective, however, for files which were on the share during the last snapshot. When users accidentally deleted files recently placed on the share, I have no recourse except to remote desktop into the server and attempt retrieval with an undelete utility (this is only effective if the file has not been overwritten). Is there a feature like the Windows Recycle Bin for Windows Server 2003 File Shares? What is the best way to protect my users against accidental file deletion in this scenario?

  Read the article

• Firefox 11 sync with Android device

  - by gisek

  I've just installed Firefox 11. I'd like to sync it with the one on my Android device. I tried to follow the instructions they provided and tried to pair device. I entered the code from Android to desktop. This made my phone show a window showing 'Waiting for device' and a progress bar running all over again. Than I tried to use 'I'm not near my computer' option on Android. I am asked for email, password and a recovery key. So I googled a little and found an instruction. I go to Options/Sync. But there are only 2 options: Set Up Firefox Sync Pair a device So how can I get this recovery key?

  Read the article

• Email censorship system

  - by user1116589

  I would like to ask you about any censorship / moderation system. Basic workflow of events: Customer sends email to [email protected] from [email protected] ACME administrator receives notification and can moderate email After moderation administrator confirm an email and send it to [email protected] John answears to [email protected] Before the email is send it is moderated again by ACME administrator What is important, that this functionality is easy to do with some CMS/CMF systems. The problem is that we do not want to use an extra domain and force customer to login an extra system. Customer should only use his own email box or desktop email application. Thank you, Tomek

  Read the article

• Client backup solution for small (100-150 user) homogenous win/nix/mac office?

  - by Gomibushi

  We are currently using Symantec Backup Exec with Desktop and Laptop Option for our Windows clients, time machine for mac and offer simple rsync to linux users, in addition to home folders that are always backed up and available. We are not overly happy with the horrid complexity and multitude of minor bugs in SBE, but "when you don't touch it, it mostly works". Ideally we'd like to offer a real and full backup solution to all clients, but mostly to Linux users, as they don't have a good alternative. I have barely tested Druva on windows, and it is promising in its simplicity and "it just works" looks, but does anyone have experience with it? This post lists some that I will look at.

  Read the article

• Upgrade the Graphics Card for a Dell Dimension 3100

  - by Pat Foran

  Hi, I have a Dell Dimension 3100 Desktop with a 128MB Graphics Card Integrated into the Mother Board. I need to upgrade this 128MB to at least 256MB or 512MB if the system will support same. I am told by Dell that all I have is a PCIx1 slot and that they do not stock a Graphics Card for this. I was told to shop around at Amazon and ebay etc and I would find one there. I have shopped around for some time now and do not know exactly what I am looking for. There are several PCI Graphics Card out there but which one would be the correct one for a Dell Dimension 3100. Can you help me resolve this problem. If you know of a PCIx1 card that will sort out my problem you might please let me have all the details for to purchase it. Regards, Pat,

  Read the article

• Stop RAID 5 from Initializing

  - by Antz

  Hi, I am trying to follow Ictinike's guide on Recovering Intel RAID "Non-Member Disk" Error found here, Ictinike's RAID recovery Guide I have recreated my RAID array as per the instructions. However my RAID array status is then automatically set to: INITIALIZE When I boot back into my Windows XP desktop, the Intel Matrix Storage Utility begins to "Initialize" my drives. This is a long slow process that will take about 20 hours. I suspect all my data will be lost. I have gone back into my bios and disabled my RAID controller to prevent any further initialization and data loss. I have read that initialization will cause data loss. I've also read somewhere that it won't. I am not so confident in the latter. Is there anyway to stop this initialization process so I can continue to follow the steps in the recovery guide? Some system specs: ABIT IP35 Pro Motherboard ICH9R on board RAID controller

  Read the article

• How can I register a custom protocol with xdg ?

  - by julien

  I've been struggling this morning trying to associate an application with a custom protocol, namely emacsclient and org-protocol. I'm calling this protocol from a webbrowser bookmarklet, and I get the following behaviour : In chromium, the "Launch Application" dialog comes up, and calls xdg-open org-protocol://... which ends up firing a new chromium frame. In firefox, I've tried setting network.protocol-handler.app.org-protocol to an empty string or my emacsclient path, anyhow I get the following error message : "Firefox doesn't know how to open this address, because the protocol (org-protocol) isn't associated with any program" without even showing any external application selection dialog. I'm not using any desktop environment, so I need to make this work strictly with xdg, however, despite reading the shared mime info spec etc, I still can't fathom a working configuration.

  Read the article

• How to stop receiving an error reading iCal invitations on Mac sent from Thunderbird?

  - by Matthew Rankin

  When I open an iCal invitation (Mail Attachment.ics file) in Mac Mail.app sent to me from someone using Thunderbird, I receive the following error: The only solution that I've found to date is to save the Mail Attachment.ics file somewhere like the Desktop, open it in a text editor, and delete the blank lines at the beginning and end of the file. This problem appears to only happen when I'm receiving invitations from people using Thunderbird under Windows. Does anyone know of a better way to solve this problem? Is this a bug in Apple iCal, or is Thunderbird not meeting the iCal spec? Configuration Information OS: Mac OS X 10.6.2 Mail Program: Mac Mail.app ver. 4.2 (1077) Calendar Program: Mac iCal.app ver 4.0.1 (1374)

  Read the article

• How to lock screen in linux before hibernating?

  - by Emanuel Ey

  So when i hibernate my laptop the screen doesn't lock automatically. To solve this i've changed /etc/acpi/powerbtn.sh to contain: su - myUsername -c "gnome-screensaver-command -l" sudo pm-hibernate exit 0 When running this file from a command line it works as intended (ie, lock the screen and then hibernate). Unfortunately, when pressing the power button, it still just hibernates without locking the screen -what am I missing? EDIT: I've added the line whoami>>~/Desktop/test.txt to verify which user is executing the /etc/acpi/powerbtn.shscript. When pressing the power button, the file test.txt is created, but is empty. From this i conclude that the script is in fact being called when pressing the power button. What i do not understand is how the output of whoami can be empty...

  Read the article

• RAID10 without write-back cache = horrible write performance?

  - by Harry Mexican

  I have just provisioned a dedicated server on singlehop. I'm running it through some tests to know what to expect performance-wise. On the I/O side (with 4 1TB disks in RAID 10) I get: write-cache disabled 200 MB/s read throughput 30 MB/s write throughput I thought that was really low compared to my desktop HD which gets 150-150 or so. So I had a chat with them and they suggested enabling the write cache. New results: write-cache enabled 280 MB/s read 260 MB/s write which is great and all but means I'd have to add a BBU for an additional monthly cost. Is it normal for the write throughput to be 1/4 of a regular drive on RAID10, if you don't have write cache? It almost feels like its intentionally bad to force you to pony up for the BBU. I'd be happy with normal non-raid performance of 150/150.

  Read the article

• My profile won't load!

  - by blsub6

  I can get into my Windows Server 2008 R2 primary domain controller via remote desktop just fine. It's my boss who's got his profile messed up. When he tries to log in, he gets the message The User Profile service failed the logon. User profile cannot be loaded. I've looked for his profile everywhere and cannot find it to delete or fix it. System Properties Advanced User Profiles shows my profile, the Administrator profile and the Default Profile. HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList only shows my profile and the Administrator profile. Everything that I've found on the internets points me to those locations. Help a brotha out?

  Read the article

• Amazon EC2 SQL Server Connection

  - by cnxmax

  I have two instances running on Amazon AWS EC2. One is running MSSQL Server 2005, the other is running a web application. I CAN connect to the database in my app using a connection string that references the Public IP of my EC2 instance running SQL Server. I CANNOT connect from the web app server if I change the connection string to reference the database servers Private IP Address. But I can connect if I run that same code on the database server itself. I can remote desktop from the app server to the database server using the private IP. I have a feeling there is something in my SQL Sever configuration that is preventing this remote connection. I have remote connections enabled, I have it set to listen on all IP addresses. Any ideas? Other things I've done: - Added exceptions to Windows Firewall - Tried connecting to using EC2 DNS Names

  Read the article

• How do I reinstall/enable snapper?

  - by Aaron Digulla

  I had errors in my root filesystem (btrfs) so I recreated it from a backup but now, snapper doesn't work anymore: # /usr/bin/snapper -v -v -v -v create --description test IO Error. # snapper -v delete-config Deleting config failed (deleting snapshot failed). # snapper create-config / Creating config failed (subvolume already covered). # snapper -c root create-config / Creating config failed (subvolume already covered). # snapper list Type | # | Pre # | Date | User | Cleanup | Description | Userdata -------+---+-------+------+------+---------+-------------+--------- single | 0 | | | root | | current | I also tries to reinstall/remove and install the package snapper but without any luck. Any ideas how I can make snapper work again? openSUSE 12.3 with kernel 3.7.10-1.1-desktop.

  Read the article

• Connecting mother board, power supply, and tower

  - by JordanD

  I am working on putting together a desktop for the first time and and ran into a problem, I am not sure how to connect the fans that came in my tower, my power supply, and connect them all to the mother board. Tower Mobo Power Supply There are 3 fans in the tower, each have 3 pin male and female connector that come connected, and 4 pin (larger?) male and female connector which are hanging. How would I go about connecting The fans together then to the power supply and mobo so it is easiest control (or suggest me a smart / better option). Pictures are from fans on HAF 922 Tower. Thanks

  Read the article

• Cannot select fields with the mouse Windows 7

  - by Nick

  Lately I cannot select a word (field) with the mouse. When I left click on a field drag the mouse to the end of the field then release the button, the selection (blue shading) disappears. Sometimes after several tries the shading stays and I can delete the field. Up to a week ago everything worked fine. Is this a bug, virus? I am using Windows 7 Also, in Live Mail after I finished reading an item in the Inbox, I click the X in the upper right corner to return to the rest of my mail, but instead it takes me back to the desktop and have to double click the Live Mail again to continue. Again this only happened recently. Things worked OK before and this does not happen regularly.

  Read the article

• Monitors - inches vs resolution

  - by Vnuk

  I'm currently moving away from living five years only on laptop to a desktop setup. I'm currently browsing for monitors and I've noticed something strange. On my laptop I have 1920x1200 on 17". To get the same resolution on a monitor I have to get Dell U2410 24" or Samsung SM2443NW 24". I do not need (or want) 7" more inches of screen, I just want the 1920x1200 resolution. Why is this setup (big resolution on less inches of screen) available on a laptop but not on a regular monitor? I'm setting this as a community wiki beacuse I think that there is no right answer here...

  Read the article

< Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >