Search Results

Search found 13968 results on 559 pages for 'device dependent routing'.

Page 388/559 | < Previous Page | 384 385 386 387 388 389 390 391 392 393 394 395  | Next Page >

• Boot from VHD with windows7 - bcdedit trouble

  - by Michiel Overeem

  I'm running Windows7 Enterprise, x64 version. I've created a windows7 vhd file with help of the following blog post hanselman blog After that, I've added it to my boot menu with help of another blog post hanselman blog This worked great. After that, i've upgraded my hdd. With help of clonezilla i've copied the old disk to the new disk. Next step was to copy the vhd to another partition. Then i updated the boot menu. However, the step C:\>bcdedit /set {guid} device vhd=[driveletter:]\<directory>\<vhd filename> fails with the message An error has occurred setting the element data. The request is not supported. what is happening?

  Read the article

• Unhappy with performance of GBit Ethernet to Fiber converter

  - by Aaron Digulla

  I just bought a TP-Link MC200CM GBit Ethernet (1000-T) to Fiber (1000-SX) media converter. The device works but I'm unhappy with the performance: When connecting my computer over 1000-T (twisted pair, Cat 6, 18meters) with my server, I get a throughput of about 610MBit/s. If I replace the cable with two media converters, I'm left with about 310-315MBit/s (i.e. half the performance). My setup is like this: Computer <- GBit switch <- long cable <- GBit switch <- server Computer <- GBit switch <- MC200CM <- 30m fiber <- MC200CM <- GBit switch <- server Is there a way to improve the performance? Will another MC be faster? Or is that about as much as I can expect with the additional 2 converters?

  Read the article

• Securing data sent to an unencrypted WiFi AP

  - by David Parunakian

  The business plan of a project I'm involved in assumes selling certain WiFi-enabled devices to end users. All these devices originally have an unencrypted connection and a standard SSID. The problem is that although the user can connect to it and set both a new SSID and a WPA passphrase, these are being sent to the AP in plain text and thus can be intercepted by anyone nearby with a sniffer. What's the best solution to this problem, and why? Initially set up an encrypted wireless network at the device and supply the user with a printed passphrase Buy an SSL certificate for the AP's default IP address or local domain name (the APs aren't supposed to work as a router and have a captive portal & dnsmasq installed, so all of them can pretend to be myunit.example.com, as far as I understand) Something different Thank you.

  Read the article

• Enable automatic driver install in Windows XP

  - by Peter

  When Windows detects new hardware (be it graphic card or USB Peripheral) it automatically installs driver and if it can't find a driver it shows "Found New hardware wizard" that allows you to manually select a driver. My problem is that this "Found New hardware wizard" shows up every time when I plug a new device and I have to click Next Next Next.. until it finishes installation. It's just like in Windows 98 ;) I want to fix it to the way it's supposed to be. It's got nothing to do with "Windows Update" and "Driver Signing" settings in "System properties - Hardware" tab, those are on default settings. Here is the same problem I have, but those replies ale completely useless

  Read the article

• Recovering drivers from previous installation?

  - by Walkerneo

  Yesterday I bought a new computer and I've been setting it up since this morning. The hard drive came with windows 7 home premium (x64) installed, but I decided to instead install windows 7 ultimate (x64) - this is what I'm currently using. Unfortunately, there were some drivers that were installed that I need in this installation. I only notice because the computer doesn't have the ethernet drivers, so I'm only able to connect to the internet via wireless. There are other drivers missing as well, but I'm not yet seeing the effects. I still have the Windows.old folder with the previous installation, which has the drivers. Is there any way to copy the necessary ones over? I tried the options for updating driver software through device manager with the path set to System32\drivers of the old installation, but it didn't find anything.

  Read the article

• What is the difference between DLNA and UPNP ?

  - by David Michel

  Hi All, Can someone tell me the what is the difference between DLNA and UPNP ? I can see that some devices such as NAS have their specifications mentioning both (e.g. Iomega StorCenter) or only DLNA (e.g. Netgear Stora). Is this a synomym for the same thing or is is actually 2 different protocals ? Are they compatible, i.e. if a media server uses DLNA and the streaming device uses UPNP, will it work ? I looked around but could not find any clear answer... Many thanks David

  Read the article

• Outlook activesync not pushing changes to devices

  - by Ryan Peters

  I recently set up my account outlook.com account and connected Outlook 2013 to it using ActiveSync. For a while, it was pushing changes I made, for example, from the web client to my phone and my Outlook when an email was deleted, moved, etc. The change was instant. Now all of a sudden, I have to manually refresh to see changes on either device. What happened? I just set up my wife's email account and it works fine, though she has no emails in it yet. I have several hundred. Why is mine not pushing sync changes and hers is? Thanks.

  Read the article

• Good HDMI splitter solution

  - by Mehper C. Palavuzlar

  I have a full HD TV which has only 2 HDMI ports on it. Since I have more than 2 devices I connect to TV (e.g. laptop, game console, DVD player), it becomes uncomfortable to plug in and plug out HDMI cables every time I need to use the relevant device. I need a cheap solution to increase the number of my HDMI ports at least to 3. What type of splitter do you recommend? Does the quality of splitter matter, or do they all produce the same audio & video quality?

  Read the article

• RDMA architecture - do you need adapters on both ends?

  - by Bobb

  I know Linux can use RDMA NICs like Solarflare... I just found Intel has something like that NetEffect cards. But Intel is talking all about clusters.. Can someone please explain. If I want low-latency networking and install RDMA NIC on my server. Is there limitation on where the cable can go? Is there a specific device expected on the other end? Is it special RDMA switch or RDMA adapter before switch or what? Why is this cluster talk? What if I want a single server with Windows (I can install HPC Windows or Windows 2008 R2)?

  Read the article

• Snap Server 18000 connection help!

  - by sicko666

  I wonder if anyone here can help me. I have a home server setup made up of old secondhand computers, 2 servers running Windows Server 2003, 1 workstation running Windows 7, a 16 port switch & an adsl ethernet modem. All these connect and talk to each other fine but then I got a "Snap Server 18000" and a "Snap disk 30sa" sata array. When I turn the Snap on, it boots past the BIOS, runs a kernel, then displays: This device cannot be managed via the video/kbd/mouse interface. The video is now disabled. You may access the management functions from your web browser. Only, none of the other PCs detect it, so no browser can find it! I have checked all cables, and all LEDs indicate there's a connection. I have installed the windows "iscsi" and the adaptec "Snap Server Manager" on all PCs but still it's not detected. I don't know what else to do, please advise!

  Read the article

• Merit and demerits for various Linux fiberchannel multipath options

  - by wzzrd

  On our Linux servers, we currently use HPs qla2xxx drivers, because it has multipathing (active/passive) built in. The are, however, various other options, like Red Hats device-mapper-multipath with the stock qla2xxx drivers (multibus and failover) and things like SecurePath and PowerPath (both of which can do trunking, iirc). Can someone tell me what the merits and demerits of the various options are (if I can ask such a question), besides the obvious fact that the {Secure,Power}Path options cost vast amounts of money? I'm mainly interested in the freely available options, like HPs qla2xxx vs. Red Hats multipathd and possible other open source solutions, but I would like to hear good reasons to go for the commercial solutions too. UPDATE: I'll be benchmarking various options the coming few days (the average of 10 runs of iozone for each option (options being native qla2xxx failver, native qla2xxx multibus, HP qla2xxx failover)). I'll post a summary of results here for those interested.

  Read the article

• Errors reported by "powercfg -energy"

  - by Tim

  Running "powercfg -energy" under Windows 7 command line, I received a report with following three errors: System Availability Requests:Away Mode Request The program has made a request to enable Away Mode. Requesting Process \Device\HarddiskVolume2\Program Files\Windows Media Player\wmpnetwk.exe CPU Utilization:Processor utilization is high The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization. Average Utilization (%) 49.25 Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility with the hardware in this computer. I was wondering for the first error, what does "enable away mode" mean? for the second, what utilization percentage of CPU is reasonable? for the third, what is "PCI Express Active-State Power Management (ASPM)"? How I can correct the three errors? Thanks and regards!

  Read the article

• Computer won't recognize second WD internal HD

  - by music man

  I installed a Western Digital Caviar Green 1TB internal hard drive, and want to use it for back up. My BIOS recognizes the device, but it is not recognized in Disk Management. It also is not recognized in "my computer." When I right-click my C drivepropertieshardware, I see it listed. First the drive was plugged into SATA port 1 on my motherboard, then I tried it in port 3, where it remains. I've been working on this for hours. Any help would be appreciated. More info Hard drive model #:WD10EADS-65M2B1 Windows 7 Home Premium 64 bit Service Pack 1 Computer:HP Model p6404y, Processor:AMD phenom II x4 820 2.80GHZ 8 gigs RAM

  Read the article

• How to find out if the screen is WLED or RGBLED on Dell Studio XPS 16?

  - by Abhijeet

  I just ordered the Dell Studio XPS 16 with i7 and 16" RGBLED screen. This upgrade from WLED LCD to RGBLED LCD charged me more $$. But now when I view the order online, it lists this part as "320-8335 Premium FHD WLED Display, Obsidian Black, 2.0 MP Webcam". When called Dell, the rep says this part is RGBLED screen and the "premium" is for RGBLED. I want to make sure they are shipping me the RGBLED screen and not the WLED. Is there any way to verify this after I receive (either from Device Manager or BIOS or somewhere in system settings)? Also, is there any published specifications / criteria that we can run (some third party software) on this monitor which can tell if this is WLED or RGBLED?

  Read the article

• Are there any advantages of GO Widgets over vanilla Android Widgets

  - by Supuhstar

  I use a suite of GO programs on my Android 4.1.2 device. Most relevant to this question, I've installed the GO Launcher EX and GO Weather, and they've recently given me the choice of one paid Go Weather Widget skin for free. Here, my conundrum lies: The skin I want comes in two versions: one for the GO Widget (can only be used on GO Launcher EX) and one for the vanilla Android widget. Are there any advantages for me choosing the GO Widget? I'm thinking things like increased performance because it'd be better integrated into the GO ecosystem, or more options, or something along these lines.

  Read the article

• Only one user at once through remote

  - by Lazlo

  Hi, This is probably an easy question for anyone used to servers, and I know I once managed to do it, but I don't remember how. I purchased a VPS and am able to connect correctly as Administrator, and can start, let's say, MyServer.exe. Problem is, if I connect as Administrator on another device, this process is still there, but I can't see it. What I want to do is limit the connection per user to 1, and disconnect others when one logs in. I know there was a simpler term, a simple way, but I truly don't remember. And since I'm not used to the vocabulary of servers, I couldn't find it in the S/F questions. Thanks in advance!

  Read the article

• No compatible network card

  - by sbintcliffe

  Motherboard: Asus K8N-E Deluxe with onboard NIC (nVidia nForce) Secondary NIC: I've tried using a standard NIC (Device Manager displays this as D-Link DFE-538TX 10/100, but under manufacturer in the General tab of the properties in Windows it states Realtek Semiconductor Corp.) I have downloaded ESXi 4.0.0 build 208167 and cooked to disc. I've booted from it, the .TGZ modules load from the yellow and grey screen, the progress bar reaches to about 60% and like a second later the screen changes and I have the following information on screen; "No compatible network adapter found. Please consult the HCG." I've checked the HCG and found that my motherboard is listed. I also get the same message with the secondary NIC. Any ideas please?

  Read the article

• Ubuntu server very slow out of the blue sky (Rails, passenger, nginx)

  - by snitko

  I run Ubuntu server 8.04 on Linode with multiple Rails apps under Passenger + nginx. Today I've noticed it takes quite a lot of time to load a page (5-10 secs). And it's not only websites, ssh seems to be affected too. Having no clue why this may be happening, I started to check different things. I checked how the log files are rotated, I checked if there's enough free disk space and memory. I also checked IO rate, here's the output: $ iostat avg-cpu: %user %nice %system %iowait %steal %idle 0.17 0.00 0.02 0.57 0.16 99.07 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn xvda 2.25 39.50 16.08 147042 59856 xvdb 0.00 0.05 0.00 192 0 xvdc 2.20 25.93 24.93 96530 92808 xvdd 0.01 0.12 0.00 434 16 xvde 0.04 0.23 0.35 858 1304 xvdf 0.37 0.31 4.12 1162 15352 Rebooting didn't help either. Any ideas where should I be looking?

  Read the article

• What ssh command would I use to set up "backwards listening"

  - by Nathan

  Machine A is behind a firewall. I have physical access to it, but I want to log into it remotely, and I do not have access to the firewall settings. Machine B is remote, and not behind any firewall. (It's my linode) Machine C is the mobile device I'm going to attempt to ssh into A from. Is there an ssh command that I can run from machine A that connects to machine B and stays open, that will allow me to log into A from C, via B? From the manual I'd guess it would be to run the follwing on A ssh -R *:9999:localhost:22 me@B and then run this on C ssh me@B -p 9999 but the previous command reports "Connection refused."

  Read the article

• Can't Install Windows 2008 R2 on Lenovo Laptop With SSD

  - by Ben

  I am trying to install Windows Server 2008 R2 on a new Lenovo X201 or T410 laptop. Setup halts with the following pop-up: A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the windows installation media is in the CD/DVD drive you can safely remove it for this step. The CD drive is obviously working, as it's booting from CD to get to this point. The only thing I can think is that it is to do with the fact they have SSD disks in - but that's just a guess.

  Read the article

• zfs rename/move root filesystem into child

  - by Anton

  Similar question exists but the solution (using mv) is awful because in this case it works as "copy, then remove" rather than pure "move". So, I created a pool: zpool create tank /dev/loop0 and rsynced my data from another storage in there directly so that my data is now in /tank. zfs list NAME USED AVAIL REFER MOUNTPOINT tank 591G 2.10T 591G /tank Now I've realized that I need my data to be in a child filesystem, not in /tank filesystem directly. So how do I move or rename the existing root filesystem so that it becomes a child within the pool? Simple rename won't work: zfs rename tank tank/mydata cannot rename to 'tank/mydata': datasets must be within same pool (Btw, why does it complain the datasets are not within same pool when if fact I only have one pool?) I know there are solutions that involve copying all the data (mv, or sending the whole dataset to another device and back), but shouldn't there be a simple elegant way? Just noting that I do not care of snapshots at this stage (there are none yet to care of).

  Read the article

• Cannot resize OS X partition

  - by joshhunt

  I am trying to resize my existing Mac OS Extended partition on my Macbook to install Windows 7 (using steps similar to these), but when ever I go to apply the changes, I get this error: Partition failed Partition failed with the error: The partition cannot be resized. Try reducing the amount of change in the size of the partition. The total capacity of the hard drive in question is 260GB, with the entirety being taken up by the OS X boot partition. There is I am aiming to shrink that partition down to 60GB. How can I fix this problem? I have been reducing the amount of change by 10GB each attempt, but it still is not working. I assume the problem is that there is not a large amount of continuous space on the device. Is there some way to can do a manual defrag that would rectify this problem?

  Read the article

• standard keyboard doesn't work, but hotkeys do.

  - by alureonissue

  I posted earlier, but I've learned more about the problem since. (windows xp sp3) AVAST found alureon in kbdclass.sys and atapi.sys. I quarantined both files and restarted. keyboard and cdrom weren't working. I uninstalled them in device manager and updated the drivers. That fixed the cdrom but not the keyboard. Oddly, the keyboard hotkeys work (the row of special keys across the top for calculator, windows explorer, mail, browser) but the standard keys do not. I uninstalled and reinstalled SP3 to no avail. Any advice? not sure if I should have reposted this but I thought the hotkeys working might be an important point left out in the first post. Sorry if I'm doing this wrong ;/

  Read the article

• my windows xp sp3 diagnostick:windows could not detect any wired or wireless network cards installed on your machine

  - by Yosef

  Problem: cant connect to internet with my new installation of windows xp sp3. Details: I have ubuntu in pc that worked with wired internet. i format all disk and install windows xp sp3. i have auto internet that defined in my router - other computers have internet. I run diagnoze of ie and get: windows could not detect any wired or wireless network cards installed on your machine In Device Manager i have only 1394 Adapter I dont see any internet adapters. Edit: I find with ubuntu livecd that i have hardware:82566dc gigabit network connection Thanks

  Read the article

• How to automate changing my ip?

  - by callisto

  I am very new to OSX. I will use my MBP at work and home. I would like to be easily able to switch my ip when changing location. Thus far I have dabbled with the automator, hoping to do something like this: [pseudocode] If IP = 192.168.0.10 root# changeip 192.168.0.10 10.0.0.15 else root# changeip 10.0.0.15 192.168.0.10 The reason for this is that my IP from home will not allow me access at work and vice versa. I have friends and family who drop in now and then, multiple wireless devices set up for the home IP range. Changing all of that to accommodate one new device (the Macbook) would make me reconsider my foray into OSX. I'd rather have the MBP adapt to me than I to it.

  Read the article

< Previous Page | 384 385 386 387 388 389 390 391 392 393 394 395  | Next Page >