Search Results

Search found 14372 results on 575 pages for 'home premium'.

Page 388/575 | < Previous Page | 384 385 386 387 388 389 390 391 392 393 394 395  | Next Page >

• Can I use an nVidia Geforce 9600GT for triple-monitor?

  - by John Rudy

  My work PC has (as you can guess from the title) a single Geforce 9600GT card. According to the spec page for this card, both DVI ports are Dual-Link DVI. Both are currently in use on Dell 19" 1280x1024 screens. I'm running Windows 7, with Aero enabled, for what that's worth. What I'm wondering is if I can use a standard DVI splitter cable to drive a third screen from one of the ports -- specifically a Samsung 22" 1680x1050. I'm really outgrowing the two-screen setup, and am strongly considering bringing in my home monitor (which is almost never used) to bolster my usable space. If I can't, then my alternative is to replace one of these Dells with that Samsung, to give me at least a "little" more space. (Before you ask, there's probably no chance I can get my company to spring for a second video card and third monitor. Even if I could, it would not be politically expedient, as a number of my other coworkers are already pretty jealous at my setup.)

  Read the article

• Can you plug-in the battery while laptop is on AC only?

  - by Ivan Petrushev

  Hello, I'm using my laptop at home with battery removed and only connected to the AC power. However I'm lacking the mobility as my power cord is kinda short. Is it safe from electrical point of view to plug in the battery while the laptop is connected to AC and disconnect the AC power afterwards? What about the opposite side of the question - is it safe (or what the damage could be) if you work on battery, plug in the AC and unplug the battery? If there are differents for different models of laptops, I'm asking about IBM Lenovo T60. Is there such thing as a 'hot-plug battery'?

  Read the article

• Reg: Putty SSH Access

  - by gourav

  Dear all, I have a Linux based virtual server recently purchased. I need to transfer the files from local computer to my virtual server... I tried downloading the Putty. But there were no EXE files to install. i am using Windows XP at home. If possible, can i have to installer link. Do we need to know Linux compulsorily for using this Putty. And also is there any other tool which can be used by users who dont know linux commands. Please help.

  Read the article

• Launching LibreOffice Files - Unusual Window Behaviour

  - by Mike

  Ubuntu 11.10 Unity. If I launch LibreOffice Files (ODS, ODT, ODP) with a double click in their home folders they launch with the appropriate application (Calc, Writer, Impress) however the application windows do not display the usual Close, Minimize, Restore buttons in the left hand corner. There is just a blank space where they should be. In the Unity launcher on the left there is not the expected white arrow next to the launcher icon and the open app is not seen by the ALT+TAB keystroke when you have multiple windows open. For example: if you have an app open in this way and say Firefox, if you minimize Firefox you are only left with the desktop and you have no way to locate the open LibreOffice app. Clicking the app's icon in the launcher simply opens another instance. A messy workaround is to click [Firefox] to a restored window and the LibreOffice app can be seen behind it allowing a mouse click to bring it forward. If I open the LibreOffice app from the launcher and then Open a file from its menu, it all behaves as expected. I don't find this as convenient; anyone know how to fix the bad behaviour?

  Read the article

• Using wget to recursively download whole FTP directories

  - by user9406

  I want to copy all of the files and folders from one host to another. The files on the old host sit at /var/www/html and I only have FTP access to that server, and I can't TAR all the files. Regular connection to the old host through FTP brings me to the /home/admin folder. I tried running the following command form my new server: wget -r ftp://username:[email protected] But all I get is a made up index.html file. What the right syntax for using wget recursively over FTP?

  Read the article

• Linux - How to run Firefox with AT command

  - by conualfy

  I try to run a specified command on a desired time. I found at for this, and it seems to work fine if I run: echo "ls -al / > /home/florin/test.txt" | at 4:21am But I want to run a different thing: /usr/bin/firefox -new-tab http://google.ro I tried adapting the first line with my action (running it in terminal opens a new Firefox tab with http://google.ro, so the command is correct), but with at, it does not work: echo "firefox -new-tab http://google.ro" | at 4:23am The task seems to be scheduled, but it does not run. When running the previous line I get the default reply from at: warning: commands will be executed using /bin/sh Should my Firefox command be differently run in sh? Is there a way to do my action with at, or some other way? Thanks a lot!

  Read the article

• Open Source Projects for Beginning Coders?

  - by MattDMo

  After working as a molecular biologist at the bench for many years, I lost my job last year and am thinking about a career change. I've been using open-source software and doing Linux system administration since the mid 90s, and have written/improved some small shell/Perl/PHP scripts, and am very comfortable building from source, but never progressed to creating non-trivial programs de novo. I want to move to actually learning real programming skills and contributing back to the community, with the possible eventual goal of getting into bioinformatics as a career in the future. I'm a stay-at-home dad now, so I have some time on my hands. I've done a lot of research on languages, and have settled on Python as my major focus for now. I'm set up on GitHub, but haven't forked anything yet. I've looked around OpenHatch some, but nothing really grabbed me. I've heard the advice to work on what you use/love, but that category is so broad that I'm having trouble finding any one thing to get started on. What are your suggestions for getting started? How do you pick a project that will welcome your (possibly amateurish) help? With a fairly limited skill set, how do you find a request that you can handle? What are common newbie mistakes to avoid? Any other advice?

  Read the article

• My D-Link Router is only allowing one connection

  - by Blaze

  My Router (Model: DI-624) is only allowing one wireless connection to one laptop. The other laptop is stuck hanging at connecting to the Internet I have the SSID set as "Pedro-Home" and is using a WPA PSK secured password. I have set the router using "Blaze-PC" while wired. Both Laptops critically need the Internet. > Dynamic DHCP Client List > > Host Name IP Address MAC > Address Expired Time > Blaze-PC 192.168.0.100 70-f1-a1-ff-39-a8 Apr/21/2011 17:49:14 > pedro 192.168.0.105 00-26-82-c8-47-25 Apr/21/2011 17:50:05 <<This computer isn't connecting.

  Read the article

• Scenes from OpenWorld Day One

  - by Larry Wake

  Sunday's the day that everything comes together, but there's always that last minute scramble. Here are a few peeks at what everyone's doing, and may still be doing far into the night. This is the team putting the final touches on the Hands-On Lab room for  HOL10201, "Reduce Risk with Oracle Solaris Access Control to Restrain Users and Isolate Applications". This should be a great learning experience--plus it's a chance to meet up with some of the top Solaris security people, including Glenn Faden and Darren Moffat. And here's the OTN Garage's own Rick Ramsey, working feverishly to help set up the Oracle Solaris Systems Pavilion. (Moscone South, Booth 733). Several of our featured partners will be demonstrating solutions running on Oracle Solaris systems -- plus, we'll be serving espresso, to help you power through the week. Another panorama shot, courtesy of iOS 6 -- come for the maps, stay for the photos.... Moscone South is also home once again this year to the systems and storage DEMOgrounds. Plenty to learn and see; you might even catch a glimpse of me there on Tuesday afternoon.

  Read the article

• Ubuntu 13.04 alongside Windows 8 - How to partition from Windows

  - by mengelkoch

  I plan to install Ubuntu 13.04 alongside Windows 8, and I'm looking for a CLEAR answer on how to conduct partitioning appropriately. I'm very new to all of this so a thorough explanation with minimal jargon would be great. I have an Acer Aspire M5 x64 with 6G RAM. I think I already figured out how to deal with the fast startup, UEFI and SecureBoot issues (I disabled fast startup and disabled Secure Boot). I am able to boot into Ubuntu from a LiveUSB, and I think I am ready to install Ubuntu. Note - despite some advice found here, I do have to disable SecureBoot to boot 13.04 from my LiveUSB. From what I have read here, it seems that I should (at least at first) create the partitions from WITHIN Windows 8, not from the LiveUSB, to avoid reported problems. I have run compmgmt.msc and I see the existing partitions. I see the following: Disk 0: 400 MB Recovery; 300 MB EFI System; Acer (C:) 444.95 GB (Boot, Page File, Crash Dump, Primary Partition); 20 GB Recovery Disk 1: 3.74 GB Primary Partition; 14.90 GB Primary Partition I gather I need to create a mounting point '/' Partition (??), a swap partition, and a home partition. Please explain what these are, how big they should be, how I create them from Windows Disk Management, and anything else I need to know. Eventually, I plan to fully replace Windows 8 with Ubuntu, but for now I want to run alongside Windows 8 and not screw things up. I don't have any critical files saved on this computer yet. Thanks.

  Read the article

• Tracking down Data Execution

  - by Agnel Kurian

  I have some malware infecting one of our machines at home. It first showed up as winulty.exe. After investigating, I am of the opinion that winulty.exe itself is an uninfected file but is being modified after it has loaded into memory. Turning on Data Execution Prevention for all processes and services has confirmed this to be true. How do I track down the process responsible for this? I've used File Monitor from sysinternals.com to monitor winulty.exe and see this being accessed by the svchost.exe instance hosting most of the system services and also by dfrgntfs.exe. How do I know which service or which DLL has been infected?

  Read the article

• nvidia: switching dvi socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Sharing My Thoughts on Space Flight

  - by Grant Fritchey

  This went out in the DBA newsletter from Red Gate, but I enjoyed writing it so much, I thought I'd share it to a wider audience: I grew up watching the US space program. I watched men walk on the moon for the first time in 1969, when I was only six years old. From that moment on, I dreamed of going into space. I studied aeronautics and tried to get into the Air Force Academy, all in preparation for my long career as an astronaut. Clearly, that didn't quite work out for me. But it sure could for you. At Red Gate, we're running a new contest: DBA in Space. The prize is a sub-orbital flight. When I first got word of this contest, my immediate response was, "And you need me to go right away and do a test flight? Excellent!" No, no test flight needed, plus I was pretty low on the list of volunteers. "That's OK, I'll just enter." Then I was told that, as a Red Gate employee, I couldn't win. My next response was, "I quit".eventually, I was talked down off the ledge, and agreed to help make this special for some other DBA. Many (most?) of us are science fiction fans, either the soft science of Star Trek and Star Wars, or the hard science of Niven and Pournelle, or Allen Steele. We watched the Shuttles go up and land. We've been dreaming of our own trips into orbit and our vacation-home on the Moon for a long, long time. All that might not arrive on schedule, but you've got a shot at breaking clear of the atmosphere. The first stage is a video quiz, starring Brad McGehee, and it's live at www.DBAinSpace.com now. Go for it. Good luck and God speed!

  Read the article

• Git for Application Settings

  - by devians

  I use a lot of tools at work and at home, and im constantly tweaking them in one location or the other. It's somewhat common practice for people to use Git to version their .vim, .vimrc, and other . files, since you can host your config files on github and have the share-ability and all the other advantages that implies. Being able to version and branch my configs sounds like a grand idea, since I'm always messing about with them. I'd like to discuss the best practice for doing this on a slightly wider scope. How would you implement it? Have your configfiles repo in ~/Library/Configs or similar, and symlink the appropriate files? How to handle preference files for Applications, ie iTerm2. These files are recreated every time, so you'd have to symlink 'backwards' and put a link in the repo? rather than symlinking to the repo, since it would just delete the symlink.

  Read the article

• How to tell if you are connected to Wireless B, G or N?

  - by Raheel Khan

  I am using Windows 7 on all wired desktops and wireless laptops in my home network. I recently upgraded my Ethernet switch to Gigabit and instantly noticed an increase in throughput in wired devices. I also bought a Wireless-N WAP but with degredation in wireless file transfer speeds. I have been told that a number of reasons could affect wireless speeds including which WAP is used, how many wireless devices are connected, which security mode is used, etc. However, that remains irrelevant to my question. Each of my laptops claim to support Wireless-N but I cannot seem to figure out how to determine if the laptops are truly running Wireless-N or are connected to the WAP through some sort of mixed-mode. I do not have control of the WAP device so cannot tell what mode it is running in. Is there a way to tell which mode is being used and what the throughput is for each connected device without having access to the WAP interface?

  Read the article

• Identity Management: The New Olympic Sport

  - by Naresh Persaud

  How Virgin Media Lit Up the London Tube for the Olympics with Oracle If you are at Open World and have an interest in Identity Management, this promises to be an exciting session. Wed, October 3rd Session CON3957: Delivering Secure Wi-Fi on the Tube as an Olympics Legacy from London 2012 Session Time: 11:45am-12:45pm Session Location: Moscone West L3, Room 3003 Speakers: Perry Banton - IT Architect, Virgin Media                    Ben Bulpett - Director, aurionPro SENA In this session, Virgin Media, the U.K.'s first combined provider of broadband, TV, mobile, and home phone services, shares how it is providing free secure Wi-Fi services to the London Underground, using Oracle Virtual Directory and Oracle Entitlements Server, leveraging back-end legacy systems that were never designed to be externalized. As an Olympics 2012 legacy, the Oracle architecture will form a platform to be consumed by other Virgin Media services such as video on demand. Click here for more information.

  Read the article

• failed to use mutt to send mail to company mailbox

  - by Acewind

  I'm using mutt&postfix on CentOS 6.2: mutt-1.5.20-2.20091214hg736b6a.el6_1.1.x86_64 postfix-2.6.6-2.2.el6_1.x86_64 When I try to send mail to my company mailbox, I receive an error: mutt -s "test" [email protected] < /home/mail.txt error from postfix: : host out1.ourcompany.com[10.30.17.100] said: 555 Syntax error (in reply to MAIL FROM command) Then I try to use service sendmail as SMTP server, but also failed: **----- The following addresses had permanent fatal errors ----- (reason: 555 Syntax error) ----- Transcript of session follows ----- ... while talking to out1.ourcompany.com.: MAIL From: SIZE=667 <<< 555 Syntax error 554 5.0.0 Service unavailable** Any body can tell me why? Thanks!!!! I can make sure DNS is OK, and I set realname "root@myserver" in /etc/Muttrc

  Read the article

• ORAchk version 2.2.5 is now available for download

  - by Gerry Haskins

  Those awfully nice ORAchk folks have asked me to let you know about their latest release... ORAchk version 2.2.5 is now available for download, new features in 2.2.5: Running checks for multiple databases in parallel Ability to schedule multiple automated runs via ORAchk daemon New "scratch area" for ORAchk temporary files moved from /tmp to a configurable $HOME directory location System health score calculation now ignores skipped checks Checks the health of pluggable databases using OS authentication New report section to report top 10 time consuming checks to be used for optimizing runtime in the future More readable report output for clusterwide checks Includes over 50 new Health Checks for the Oracle Stack Provides a single dashboard to view collections across your entire enterprise using the Collection Manager, now pre-bundled Expands coverage of pre and post upgrade checks to include standalone databases, with new profile options to run only these checks Expands to additional product areas in E-Business Suite of Workflow & Oracle Purchasing and in Enterprise Manager Cloud Control ORAchk has replaced the popular RACcheck tool, extending the coverage based on prioritization of top issues reported by users, to proactively scan for known problems within the area of: Oracle Database Standalone Database Grid Infrastructure & RAC Maximum Availability Architecture (MAA) Validation Upgrade Readiness Validation Golden Gate Enterprise Manager Cloud Control Repository E-Business Suite Oracle Payables (R12 only) Oracle Workflow Oracle Purchasing (R12 only) Oracle Sun Systems Oracle Solaris ORAchk features: Proactively scans for the most impactful problems across the various layers of your stack Streamlines how to investigate and analyze which known issues present a risk to you Executes lightweight checks in your environment, providing immediate results with no configuration data sent to Oracle Local reporting capability showing specific problems and their resolutions Ability to configure email notifications when problems are detected Provides a single dashboard to view collections across your entire enterprise using the Collection Manager ORAchk will expand in the future with high impact checks in existing and additional product areas. If you have particular checks or product areas you would like to see covered, please post suggestions in the ORAchk subspace in My Oracle Support Community. For more details about ORAchk see Document 1268927.2

  Read the article

• Using Folder Redirection GPO and Offline Files and Folders

  - by user132844

  I want to use Folder Redirection to redirect user's My Documents to a network share. First question is: What is best practices for mapping the drive? Should I use the profile tab in AD with the %username% variable, or a net use logon script, or something else? Second question is: How do I deal with laptops and syncing the network with the local storage? I want to have 2-way syncing so if they manually map their networked home drive and edit it from a different computer, it will sync the newer version to their My Documents folder the next time they connect their normal work computer. I also want to be sure that if they edit a file offline on their laptop while away from the office, that the network version syncs the changes the next time they connect that laptop. Please advise best practices for this scenario in a 2008 R2/Win7 environment. I am also interested in Mac clients for this environment, and while I am very Mac savvy, I would like to hear what others consider to be best practices for Mac network homedirs in a Win environment.

  Read the article

• Dual boot on Hp Envy Ultrabook

  - by phodu_insaan

  I just bought a HP Envy ultrabook 1002TX. It comes with a Win7 Home basic and a 32GB SSD + 500GB HDD. I started to install ubuntu and in doing so went and deleted all the partitions on my HDD and recreated them the way I wanted. Then when I tried to install ubuntu it didn't recognize my HDD. To solve this i typed dmraid -E -r /dev/sdX where the 'X' was my SSD drive. After this ubuntu can install but windows for some reason does not install. Also the Intel Caching feature is lost and SSD is just sitting and doing nothing. I want to know how to solve this problem. Ideeally I would like to use the SSD for caching, either in windows or ubuntu. How do I get the SSD back to working as an Intel rapid cache? How do I get windows to install properly? It tell me that windows is unable to configure itself to my hardware, and my PC came with windows pre-installed so this is not possible. Sorry for the long question and thanks for your answers! PS: At one time when I booted I pressed Ctrl+i and went to the intel rapid cache menu. I think i screwed up something in here, because only after this the rapid cache stopped working, and each time I booted the PC thought the BIOS was my primary disk.

  Read the article

• Ubuntu 12, chromium/chrome facebook not loading

  - by Grant

  this problem started with chrome, tried chromium to fix it. both have this problem, and after installed firefox no longer works with facebook. I found a threas with two fixes that work and what I need to know is how to make these fixes permanent. one is a cache permissions workaround. launching chromium from terminal with a redirect to a new self created cache in the home folder works. how can i repair the permissions issue with the cache or make a permanent change to the cache chromium uses? two, the ifconfig wlan0 mtu set to 1492, this setting doesnt seem to be perpetual after a reboot. this set of issues is I believe specific to my particular install as there isnt a huge issue from anyone else out there, i'm on a toshiba satellite laptop with a 50/50 HDD partition split with windows. This is likely causing the issue or contributing in some way but I wont run linux full time on this machine until I get these kinks a more permanent fix. Thanks in advance for any advice/answers.

  Read the article

• There's IP but can't reach gateway

  - by icky

  I have just installed ubuntu 12.04 on my new laptop, and brought it back to home, but I found the wireless network does not work. Strangely, it has the correct ip, but can't connect to the gateway. ifconfig gives ip 192.168.64.36, with broadcast 192.168.79.255 and mask 255.255.240.0, this are all correct, the gateway is at 192.168.64.1 cat /etc/resolv.conf nameserver 192.168.64.1 nameserver 127.0.0.1 which i think it's also right. but when I ping 192.168.64.1, all packages are lost. Please help me with this, I really do not know what happened to my network settings. Huckle, Thank you for your reply ifconfig wlan0 Link encap:Ethernet Hwaddr 88:f9:af:2a:ca:1b inet addr:192.168.64.36 Bcast:192.168.79.255 Mask:255.255.240.0 inet6 addr: fe80::8a9f:faff:fea2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:376 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3950 TX byetes:60288 iwconfig wlan0 IEEE 802.11bgn ESSID:"Chiono" Mode:Managed Frequency:2.417 GHz Access Point: 82:54:99:94:6D:43 Bit Rate=13.5 Mb/s Tx-Power=13 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=70/70 Signal Level=-32 dBm Rx invalid nwid:0 Rx invalid crypt:0 RX invalid frag:0 Tx excessive retries: 9 Invalid misc:10 Missed beacon:0 route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.64.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.64.0 * 255.255.240.0 U 2 0 0 0 wlan0 Thank you very much

  Read the article

• Debugging logrotate postrotate script

  - by robert

  Following is my logrotate conf. /mnt/je/logs/apache/jesites/web/*.log" { missingok rotate 0 size 5M copytruncate notifempty sharedscripts postrotate /home/bitnami/.conf/compress-and-upload.sh /mnt/je/logs/apache/jesites/web/ web endscript } And compress-and-upload.sh script, #!/bin/sh # Perform Rotated Log File Compression tar -czPf $1/log.gz $1/*.1 # Fetch the instance id from the instance EC2_INSTANCE_ID="`wget -q -O - http://169.254.169.254/latest/meta-data/instance-id`" if [ -z $EC2_INSTANCE_ID ]; then echo "Error: Couldn't fetch Instance ID .. Exiting .." exit; else /usr/local/bin/s3cmd put $1/log.gz s3://xxxx/logs/$(date +%Y)/$(date +%m)/$(date +%d)/$2/$EC2_INSTANCE_ID-$(date +%H:%M:%S)-$2.gz fi # Removing Rotated Compressed Log File rm -f $1/log.gz The files are rotated, but shell script is not executed. I don't know how to debug the postscript. Is there any logfile I chek to see if there is any permission issues. If i directly execute the script from commandline file upload works. Thanks.

  Read the article

• Windows Mobile deletes my Contacts when deleting a partnership

  - by bitbonk

  Sometimes when I reinstall my PC get a new Work PC or buy a new home PC ,ActiveSync, now the Device Center asks me to delete an existing partnership to setup a partnership with the new PC, since only two partnerships are allowed. When I delete that partnership all contacts that originally came from that partnership get deleted too. How can I prevent that from happening. Do I really always have to remember to frequently backup all my contacts in a safe place? How much redundancy is needed. I hat them on one of my PCs and on my phone.

  Read the article

• How can I check if PHP was compiled with the UNICODE version of the Win32 API?

  - by Wesley Murch

  This is related to this Stack Overflow post: glob() can't find file names with multibyte characters on Windows? I'm having issues with PHP and files that have multibyte characters on Windows. Here's my test case: print_r(scandir('./uploads/')); print_r(glob('./uploads/*')); Correct Output on remote UNIX server: Array ( [0] => . [1] => .. [2] => filename-äöü.jpg [3] => filename.jpg [4] => test?test.jpg [5] => ??? ?????.jpg [6] => ?????????.jpg [7] => ???.jpg ) Array ( [0] => ./uploads/filename-äöü.jpg [1] => ./uploads/filename.jpg [2] => ./uploads/test?test.jpg [3] => ./uploads/??? ?????.jpg [4] => ./uploads/?????????.jpg [5] => ./uploads/???.jpg ) Incorrect Output locally on Windows: Array ( [0] => . [1] => .. [2] => ??? ?????.jpg [3] => ???.jpg [4] => ?????????.jpg [5] => filename-äöü.jpg [6] => filename.jpg [7] => test?test.jpg ) Array ( [0] => ./uploads/filename-äöü.jpg [1] => ./uploads/filename.jpg ) Here's a relevant excerpt from the answer I chose to accept (which actually is a quote from an article that was posted online over 2 years ago): From the comments on this article: http://www.rooftopsolutions.nl/blog/filesystem-encoding-and-php The output from your PHP installation on Windows is easy to explain : you installed the wrong version of PHP, and used a version not compiled to use the Unicode version of the Win32 API. For this reason, the filesystem calls used by PHP will use the legacy "ANSI" API and so the C/C++ libraries linked with this version of PHP will first try to convert yout UTF-8-encoded PHP string into the local "ANSI" codepage selected in the running environment (see the CHCP command before starting PHP from a command line window) Your version of Windows is MOST PROBABLY NOT responsible of this weird thing. Actually, this is YOUR version of PHP which is not compiled correctly, and that uses the legacy ANSI version of the Win32 API (for compatibility with the legacy 16-bit versions of Windows 95/98 whose filesystem support in the kernel actually had no direct support for Unicode, but used an internal conversion layer to convert Unicode to the local ANSI codepage before using the actual ANSI version of the API). Recompile PHP using the compiler option to use the UNICODE version of the Win32 API (which should be the default today, and anyway always the default for PHP installed on a server that will NEVER be Windows 95 or Windows 98...) I can't confirm whether this is my problem or not. I used phpinfo() and did not find anything interesting, but I wasn't sure what to look for. I've been using XAMPP for easy installations, so I'm really not sure exactly how it was installed. I'm using Windows 7, 64 bit - so forgive my ignorance, but I'm not even sure if "Win32" is relevant here. How can I check if my current version of PHP was compiled with the configuration mentioned above? PHP Version: 5.3.8 System: Windows NT WES-PC 6.1 build 7601 (Windows 7 Home Premium Edition Service Pack 1) i586 Build Date: Aug 23 2011 11:47:20 Compiler: MSVC9 (Visual C++ 2008) Architecture: x86 Configure Command: cscript /nologo configure.js "--enable-snapshot-build" "--disable-isapi" "--enable-debug-pack" "--disable-isapi" "--without-mssql" "--without-pdo-mssql" "--without-pi3web" "--with-pdo-oci=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8-11g=D:\php-sdk\oracle\instantclient11\sdk,shared" "--enable-object-out-dir=../obj/" "--enable-com-dotnet" "--with-mcrypt=static" "--disable-static-analyze"

  Read the article

< Previous Page | 384 385 386 387 388 389 390 391 392 393 394 395  | Next Page >