Search Results

Search found 14372 results on 575 pages for 'home premium'.

Page 386/575 | < Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >

• Sharing soundcard to network.

  - by zerkms

  Let's suppose I have a laptop (L) and desktop PC (D), both with Windows 7 onboard. It is SB X-Fi extreme soundcard with rather good 5.1 home theater connected. But it is not comfortable to watch video sitting on the sofa from my desktop (sofa is in the center of the room and D is in the corner), even though it is 23" monitor. So I'm watching everything from the laptop. So the question - is it possible somehow to "share" soundcard from D to L, so I will watch the video from notebook and listen the sound from the 5.1? L and D are connected via wi-fi (fast enough).

  Read the article

• Routing table change to access Internet over mifi

  - by Randall Blake

  I have two networks at home. One uses a Verizon mifi wireless on 192.168.1.1. The other uses a dlink router on 192.168.0.1. I have one laptop with two nics, one wireless and one not. The wireless nic connects to the mifi. The Ethernet nic connects to the dlink router. It's ip is 192.168.0.2. I also have a laptop with only one nic connected to the dlink on 192.168.0.3. I want to connect laptop 2 to the Internet. Can I do that by adding an entry to the routing table so that destination 0.0.0.0 routes to 192.168.0.2? If I do that, will laptop 1 "know" that it should route traffic from 192.168.0.3 to 192.168.1.1? Thanks for any assistance.

  Read the article

• Can I install new version of Ubuntu in spair RAIDed partition with unetbootin

  - by artfulrobot

  I have Ubuntu 11.04 running on my home desktop which has 2 hard drives mirrored by RAID. The drives are partitioned with a big data partition, a swap partition and a couple of 20Gb partitions for OSes, one is 11.04 which is in use, and the other is kept spare for installing a later version. Which is what I'd like to do now. The idea of a 2nd partition for new OS is that I can try it, and if it's problematic, I can boot back into the original one - the machine is shared with others, so I need it to stay available! I have had horrible problems with software RAID after using a Live USB stick - basically it messes up the internal numbering of the RAID drives or something, anyway, the result is you can't boot after using it :-( and have to spend ages re-assembling the arrays, trying to remember grub commands etc etc. Quite a shocker when you consider booting from a Live USB is supposed not to affect the existing system. As I'm installing in a RAIDed disc, I would typically use the Alternative install (sad to hear that this is going to be dropped in future). However, I think I might be able to use unetbootin to trick the system into working on top of the existing system that understands RAID, with the normal ISO? If unetbootin loads from drives that are already understood to be RAIDED, then presumably it will only see md0... instead of sda, sdb... and as long as I don't need to repartition (I don't) it should be fine, right? Or is that just plain foolishness? Please tell me before I end up with a dead system (again!)

  Read the article

• Disk is apparently in use by the system

  - by Shaun

  I've just fitted two disks to my home server. I'm trying to format and then raid them but I'm getting a problem that hours of Googling hasn't resolved this. The error that I'm getting is: # mkfs.ext3 /dev/sdb1 mke2fs 1.39 (29-May-2006) /dev/sdb1 is apparently in use by the system; will not make a filesystem here! # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 4.0G 1.9G 2.0G 49% / none 380M 0 380M 0% /dev/shm /opt/xensource/packages/iso/XenCenter.iso 51M 51M 0 100% /var/xen/xc-install # mount -t ext3 /dev/sdb1 /mnt/b mount: /dev/sdb1 already mounted or /mnt/b busy I'm new to this and it's got me beat. I wouldn't ask if I hadn't done my research first. Thanks.

  Read the article

• Archive Outlook mail items into SQL Server

  - by marc_s

  I am looking (and so far not finding any) for a solution to archive e-mail items from my Outlook into SQL Server. My PST is beginning to get really really big, and I'd love to extract my older e-mail into SQL Server in a way so I can still easily find mails if needed. I would prefer SQL Server as the storage medium since I'm familiar with it, and it's rock solid - I don't want to have a collection of PST files or CHM files or anything like that. Does anyone know of such a solution? I'm a power/home user - I can't afford $5'000 enterprise licenses - I need a sub-$100 solution for private use.

  Read the article

• Derniers témoignages de partenaires EMEA (Octobre)

  - by swalker

  Gagnez en notoriété grâce aux témoignages de partenaires Faites la promotion de votre expertise des produits et des secteurs d'activité d'Oracle par le biais des témoignages de partenaires publiés sur Oracle.com et profitez du trafic dont bénéficie notre portail. Pour participer, il vous suffit de remplir un formulaire et de nous informer d'un projet mis en œuvre avec succès. Si votre témoignage est sélectionné, nous vous contacterons en vue d'un entretien. Cliquez ici pour accéder au formulaire et proposer votre témoignage. Les derniers témoignages de partenaires mis en ligne sur Oracle.com : Telefónica Germany IKEA France Niederelbe Schiffahrtsgesellschaft mbH &Co. KG (Reederei NSB) Mobile TeleSystems BT Luzerner Kantonsspital  Luzerner Kantonsspital (2) Edifer ??? «????????? ???????????»/Mobile TeleSystems OJSC (MTS)  Astelit LLC Akbank T.A.S. Home Credit Group Kromberg & Schubert MATERNA GmbH Nykredit LH Dienstbekleidungs GmbH BT LHD Gruppe Niederelbe Schiffahrtsgesellschaft mbH &Co. KG (Reederei NSB) (1) Niederelbe Schiffahrtsgesellschaft mbH &Co. KG (Reederei NSB) (2) TCC Italy Champion Europe SpA LH Dienstbekleidungs GmbH McKesson Pour en savoir plus sur les collaborations fructueuses entre nos partenaires et leurs clients, parcourez les nombreux témoignages EMEA issus de tous les secteurs d’activité ici.

  Read the article

• iTunes Sync erasing Exchange calendar / contacts

  - by Garrett

  We have had a handful of instances where corporate iPhone users will be syncing Calendar/Contacts/etc in their iTunes settings, and we would like to prevent this. Unfortunately, when they sync their empty home Outlook calendars it then overwrites everything in their iPhone calendar. This has the unpleasant side effect up "updating" Exchange and wiping out every meeting they have. Luckily, our backups have bailed us out in each case - there seems to be no recovering from it any other way as the data is gone. We prefer to allow our users to continue loading media on their phones, which we believe requires iTunes. Is there a way, through Exchange ActiveSync or iOS mobile management, to prevent this from happening?

  Read the article

• Shooting Print Quality Pictures with a Camera Phone [Video]

  - by Jason Fitzpatrick

  Camera phones get a lot of grief for being underpowered but in this video tutorial the crew at SLR Lounge shows how basic technique and a good eye overcome all. Last year over at the photo blog FStoppers they put together a video showing off how you could use the iPhone as a fashion camera–essentially arguing that the camera wasn’t as important as the photographer. A lot of people said “Well yeah, but you had professional models and thousands of dollars in lighting equipment!” in reaction to the video. In turn the crew at SLR Lounge decided to make their own video showing that using only an iPhone camera and two reflectors (as well as an attractive but informal model). It of course helps to have some side kicks to help hold up your reflectors but the point still stands about modern camera phones being perfectly capable of good photos. The SLR Lounge iPhone Photo Shoot – A Follow Up Tribute to The FStoppers [YouTube] What is a Histogram, and How Can I Use it to Improve My Photos?How To Easily Access Your Home Network From Anywhere With DDNSHow To Recover After Your Email Password Is Compromised

  Read the article

• How can I discourage the use of Access?

  - by Greg Buehler

  Lets pretend that a very large company (revenue numbers with more than 8 figures) is looking to do a refresh on a software system, particularly the dashboard used by employees. This system was originally put together in the early 1990's to handle inventory tracking and storage across a variety of facilities (10+). Since this large company is now in the process of implementing some of these inventory processes with SAP they are in need of a major refresh. The existing system: Microsoft Access project performs dashboard duties Unique shipping/receiving configurations at different facilities require unique forms and queries within the Access project Uses 3rd party libraries referenced by Access to directly interface with at control system (read: motors, conveyors, and counters) Individual SQL Server 2000 instances (some traces of pre-update SQL Server 6.0 documents) at each facility The Issue: This system started as a home brewed inventory tracking scheme with a single internal sponsor who is still in charge of the technical direction. The original sponsor prescribing the desired deliverables that are being called for in the current RFP. The RFP describes a system based around a single Access project. Any suggestion that Access is ill suited for a project of this scope are shot down under the reasoning that "it works for the scope now". Are there any case studies, notices, or statements that can be used to disuade this potential customer from repeating their mistake? Does Microsoft make any statements directly about when it is highly recommended to ditch Access?

  Read the article

• Limit ftp users to only certain directories in Ubuntu

  - by George

  There are several questions around limiting ftp users to certain directories. However, most of them refer to vsftpd, which I don't think I have installed on my system. I'm running Ubuntu 9.04. How can I tell what ftp service I have installed, and then limit certain users to only the /home/ftpuser directory instead of having full access to the file system? I think I can add them to a separate group and give that group access to the proper directories, but then do I have to remove that groups permissions from all other directories? It seems like there should be an easy way like setting the chroot_local_user value in the /etc/vsftpd/vsftpd.conf file, but that doesn't exist on my system.

  Read the article

• My iPhone is stuck at screen with USB cable and iTunes logo

  - by alex

  I just tried updating the iPhone's firmware, and things went haywire. iTunes informed the update had failed and linked me to this page. The iPhone is stuck on the image from the top of that page. I held down the sleep and home buttons until it turned off and turned it back on, and then went through the iPhone's 'restore' mode. It then error'd again and I'm stuck back with the logos on the iPhone. Does anyone know how to fix this? Thanks

  Read the article

• What is wrong with my expect script?

  - by Bryan

  I'm trying to learn how to use the expect command, to help me automate deployment of some software via shell scripts, and figured I start with something simple to get me started. I've created a file in my home dir called 'foo' using: touch foo And I've created the following script saved as test.exp #!/usr/bin/expect spawn rm -i foo expect "rm: remove regular empty file `foo'?" send "y\r" When I run the script using ./test.exp, it spawns the rm command, but it doesn't appear to send the Y and carriage return. I know I don't have a typo in the expect string, as I've used copy and paste to put in the script. What am I doing wrong?

  Read the article

• How to prevent dial up networking connection window from coming up on Windows 7?

  - by Tom

  I have PPP over Ethernet connection at home, so I have a dial up connection set up which comes up every time when I log in, so I can connect to the net by clicking on it. This works fine, but now I got a router which does the connection automatically, so there is no need for the dial up networking connecting window to come up. Nevertheless it comes up everytime when I log in regardless of the living net connection already established by the router. It does not cause any error I only have to cancel the dialog, but it's a nuisance and I can't find any setting to make it stop. Of course, I could remove the networking connection altogether, but I'd rather keep it, so I don't have to create it again if sometimes I need to connect to the net directly without the router. Is there a way to stop the connection dialog from coming up without removing the networking connection?

  Read the article

• solve a partition misalignment?

  - by learner

  I have a new Dell XPS laptop which had Windows 7 installed in it. It also had a default extra partition for "Dell Utility". I installed Ubuntu in it on an Extended Partition along with windows and specified the logical partitions myself (for /,/home and swap). Now when I open Disk Utility , it shows this "Partition misaligned by 512 bytes" error for the Dell Utility partition and "Partition misaligned by 1024 bytes" for the entire Extended partition where Ubuntu is installed. Deleting the extended partition and re-installing Ubuntu may solve the problem of misalignment in the extended partition. But how about the Dell Utility partition? If I re-install Windows 7 Dell Utility wouldn't be a part of the re-install. So that may not solve it either. How do I fix this? Note: The extended partition I made contains an NTFS logical partition for holding data accessible by both OSes(basically a personal data partition). EDIT: I deleted all my Ubuntu partitions and re-installed Ubuntu like before,this time making them partitions with GParted via LiveCD. Now the only problem is that there is a misalignment in the Dell Utility partition. The other misalignment got fixed. Now how do I get rid of that issue?

  Read the article

• Linux Security/Sysadmin Courses in London?

  - by mister k

  Hi, My employer has offered to send me on a couple of training courses and I'm just looking for some recommendations. I'm mainly looking to improve my security and general sysadmin skills. I would like to do something focused on UNIX as I mainly work with Linux boxes (but also a couple of FreeBSD boxes). I don't want to do a study-from-home course, so I would need to find somewhere based in London. It would be great to hear from anyone who has some experience with this kind of course. The courses I've found so far are: www.learningtree.co.uk/courses/uk433.htm www.city.ac.uk/cae/cfa/computing/systems_it/linux.html www.city.ac.uk/cae/cfa/computing/systems_it/unix_tools_ss.html I'm not sure the City University courses are advanced enough as I already have experience... Thanks!

  Read the article

• Multilingual website without language component in the URL

  - by user359650

  I'm working on a website for Canada which will have French and English versions. For SEO purposes, I would like to avoid using any language tag in URLs because I believe it will have more impact (e.g. example.ca/products better than en.example.ca/products or example.ca/en/products). I believe this is technically possible because the2 languages are sufficiently different that the URLs won't be conflicting with one another (e.g. if you want a "product" page, it will be /products in English, and /produits in French so you know which language the URL is about). Since Google (and most likely others) doesn't rely on the URL (nor HTML tags) to determine the content language I don't see any problems with search engines. To make this possible I've thought about using a cookie distinct from the session cookie (e.g. example.org_language) with long term expiry (e.g. N years) that will memorize the language chosen by the user. That way when people visit the website with a new browser session, they get served the proper language. I have already given up on users being able to switch one page from English to French: when people will chose English or French from the menu they will be redirected to the corresponding version of the home page. Do you foresee any problems with not using a language component in the URL (whether domain or path)? (as long as one makes sure URLS don't conflict).

  Read the article

• Windows 7 - Remote Desktop - multiple credentials

  - by w--

  My home network consists of a couple Windows XP machines and a Windows 7 box. One of the Windows XP boxes is like a shared server accessed via Remote Desktop. I have an account on there and my gf has another. Previously I was able to save RDC shortcuts to this shared server including credentials. So in order to access the server from a computer on the network, I just needed to open the shortcut. I thus would have two shortcuts, one for my account and one for my gf's. In Windows 7, it seems to store credentials for a box based on machine name. I.e. I can only store one set of credentials per machine name. This seems incredibly stupid so my question is: In Windows 7, is there some way to have RDC shortcuts that use different credentials to login to the same target box?

  Read the article

• Broken characters in filenames only in some directories

  - by Kaivosukeltaja

  We have a web server running CentOS 5.8 that uses SVN for version control. When trying to switch to the latest revision, we got an error about the filenames of files in an upload directory: svn: Error converting entry in directory 'adm/emails/upload' to UTF-8 svn: Valid UTF-8 data (hex: 54 79) followed by invalid UTF-8 sequence (hex: f6 6b 69 72) Upon investigating, we noticed there were some files that had broken filenames: $ ls ~/public_html/adm/emails/upload/ Ty?el?m?trendit.csv Ty?kirja1.csv To get the update completed quickly, we simply mved the files into our home directory. Surprisingly, their filenames looked fine in their new location: $ ls ~/ Työelämätrendit.csv Työkirja1.csv After the update we moved them back to where they were and their filenames were broken again. What could cause this and how can we fix it? The system's locale is set to LANG=en_US.UTF-8.

  Read the article

• How to increase signal/range of your Wi-Fi antenna-less repeater/booster over the network?

  - by kenorb

  I've BT Home Hub in the upper flat (2-3 walls behind) and I'm using WPS Wireless-N Wifi Range Router Repeater Extender in my flat where I'm using my laptop. These are antenna-less devices. Are there any life-hack tricks to increase signal/range of my repeater without buying the new more powerful repeater? I've tried already to move my repeater closer to the ceiling or putting the aluminium foil underneath, but it didn't help. Are there any methods, specific plates or materials which can boost the signal? Specification: Model: WN518W2 Frequency range: 2.4-2.4835GHz Wireless transmit power: 14 ~17 dBm (Typical) Wireless Signal Rates With Automatic Fallback: 11n: Up to 300Mbps(dynamic), 11g: Up to 54Mbps(dynamic), 11b: Up to 11Mbps(dynamic) Modulation Technology: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM Receiver Sensitivity: 300M: -68dBm@10% PER / 150M: -68dBm@10% PER / 108M: -68dBm@10% PER / 54M: -68dBm@10% PER / 11M: -85dBm@8% PER / 6M: -88dBm@10% PER / 1M: -90dBm@8% PER Product dimensions: 11 * 6 * 7cm

  Read the article

• pinx 501 with print server - 10 licenses

  - by ra170

  I have pix 501 with only 10 licenses. I'm already approaching this limit, running 2 computers at home, 2 laptops, PS3, iphones, 2 web cams..not everthing is on all the time, but it's possible as I'm looking into adding a print server, so that I can print from anywhere in the house. So my question is, will the print server count as a connection towards the license? I think it will need default gateway, which in this case will be my pix 501. I've seen somewhere on some othee board saying, don't set default gateway in the print server to pix 501, but then how would that work? is there a work around? I don't need to print from VPN or from outside, just inside..

  Read the article

• Video conferencing software that allows a participant to mute individual users

  - by Chris Dutrow

  Have a few people working in an office and then a few more people working from home. We would all like to video chat skype-style, but for the people in the office, everything that is said by someone in the same room "echos". The echo is because the hear it one time through the actual air, and then again through their headphones or speakers: Unsure of the best way to solve this problem, but one way seems to be to use an application that enables the user to mute audio from another participant. Then the people in the office could mute all audio from other people in the same room, thus removing the echo effect. Any suggestions or ideas? Thanks so much!

  Read the article

• Configure IIS 6 to deny access to specific file based upon IP address

  - by victorferreira

  Hello guys, We are using IIS 6 as our webserver. And we need to deny the access for one specif file, placed in only one specific URL, to everybody OUTSIDE the local network. In other words, if somebody is trying to access that filme/page from their own computer at home, using the internet, they must not succeed. But, if the same person try to do that at the same network of the web server, its ok. I am not sure about that, but Apache uses ORDER DENY,ALLOW. You specify the URL, allow or deny to all or to a range of IP. Any suggestions? Thanks!

  Read the article

• OpenJDK6 At a Glance

  - by user9158633

  OpenJDK6 Quick Links Project:       Home Page  |  How to Contribute to OpenJdk |  Java SE 6 Spec Code:          Source Bundle Download  |  Mercurial Repositories: [.] , corba, hotspot, jaxp, jaxws, jdk, langtools Mailing List: [email protected]  |  Mail Archive  |  How to Subscribe Bloggers:     Joe Darcy (the founder and the first Release Manager)  |   Kelly O'Hair (current Release Manager) Blog Posts:  All Joe's OpenJDK 6 Posts  | Joe's FOSDEM Presentation Related Projects: IcedTea6  | OpenJDK 7 Important Notice: • Security fixes from Oracle will continue  through EOL of OpenJDK 6 train • EOL of OpenJDK 6 train will occur no sooner than July 2012 (one year after JDK 7 ships) OpenJDK 6 Releases Releases:  Release Process  |  Release Tools/Scripts Build Numbers  Release Engineer  Release Notes  Test Results  Change List  B01 - B22 Joe Darcy B22 Blog, src bundles B22 B22  B23 Kelly O'Hair B23 Blog, src bundles B23 B23  B24, and later Lana Steuck B24 Blog, src bundles B24 B24

  Read the article

• Netbeans: Install/Activate/Uninstall/Deactivate plugins buttons disabled

  - by Josh

  I recently installed Netbeans 6.9 on a new computer. I went to install the NB Android plugin, which I have on another computer, but I found most of the functionality of the plugins window disabled. The install, uninstall, activate, and deactivate buttons are grayed out. I have included images at the bottom. This hasn't happened to me before, and searching Google hasn't turned up anything useful. I thought it might have been a permission problem so I tried running Netbeans with gksudo but that didn't help. I also thought it might have been something wonky with the Ubuntu Software Center install, so I uninstalled that one, and downloaded Netbeans from the main site and I installed it in my home directory, but it does the same thing. I'm running Xubuntu 10.10 and Netbeans 6.9.1 Available Plugins Tab It won't let me add more than one hyperlink due to a lack of reputation. Installed Tab - http + i.imgur.com/Nhqi4.png

  Read the article

• negative time for a ping echo reply

  - by Mario

  I was happily pinging in the net when suddenly: Pinging X with 32 bytes of data: Reply from .235: bytes=32 time=1444ms TTL=41 Reply from .235: bytes=32 time=1767ms TTL=41 Reply from .235: bytes=32 time=1531ms TTL=41 Reply from .235: bytes=32 time=-1198187ms TTL=41 Ping statistics for .235: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1444ms, Maximum = -1198187ms, Average = 1073443462ms A negative time for the reply. I checked wireshark and it had the same values: Time delta from previous displayed frame: -1198.187867000 seconds Time since reference or first frame: -1179.935038000 seconds I didn't change the time of the machine while pinging. This was made in my local network at home, from a XP VM in windows 7. So I blame the VM (virtualbox). But I was wondering if this strange behaviour (to me) could have a reason, or if any of you have seen this before. Thank you bye.

  Read the article

< Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >