Search Results

Search found 21328 results on 854 pages for 'device policy manager'.

Page 389/854 | < Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >

  • MIX 2010 Covert Operations Day 3

    - by GeekAgilistMercenary
    I rolled over to the Mandalay for breakfast.  There I met a couple guys that were really excited about the new Windows 7 Phone.  They, as I, are also hopeful that the phone really gets a big push and some penetration into the market.  Not because we don’t like any other of the phones, but because this phone is so much better in many ways.  From a developer's perspective creating applications in Windows 7 Mobile will be vastly superior in ease, capabilities, and other aspects.  The architectural, existing code base, examples, and provisions to create things on the 7 Mobile Device are already existing as of RIGHT NOW.  There is no reason, except for fickle market conditions, for this phone to not just explode onto the market.  But alas, I won't hold my breath. Day three keynote had a whole new slew of things provided.  It also seemed that things got a lot more technical on this second keynote.  The oData was one of the very technical bits, yet it included almost no code.  Starting with a Netflix example and all the way to the Codename "Dallas" effort the oData Services provide some expansive possibilities. A mash up going 4 ways was then shown for finding a movie, finding local places to have a viewing, and information about the movie and were to prospectively find and buy additional movie bits.  The display was of course, in a Windows 7 Mobile device with literally a click to view each set of data.  The backend and the front end of this was beautifully smooth. The Dallas Project has a lot of potential for analytics in dashboard and scorecard creation also.  If there is a need or reason to provide data to a vast and wide range of clients, Dallas is a prime example of how to do that. Azure Clouds After the main keynote I checked out (while developing a working WPF & Silverlight Application for work) the session on deploying ASP.NET Applications, services, etc, into the cloud.  The session was pretty good, but I'll admit I got a little unfocused from it a few times.  It is after all hard to do two things at one time. I did take note that the cloud still is a multiple step process for deploying to.  This is a good thing and a bad thing.  There needs to be more checks and verifications when deploying something into the cloud just for technical reasons.  However, I feel that there should be some streamlining to the process.  Going back and forth between web and Visual Studio as the interface also seems kind of clunky.  Deployment should be able to be completed from within Visual Studio in my perspective.  Overall, the cloud is getting more and more impressive in function as well as theory. That's it from me so far on the third day of MIX.  I'll be note taking and studying hard to have more good tidbits to provide. Thanks for reading, if you're curious about more of my writing, check out this original entry at my other blog Agilist Mercenary.

    Read the article

  • Unable to make properly work the Ralink rt3090 wifi card on my Lenovo B575 with Kubuntu 12.04 64bit

    - by Sebastien
    I look and tried many solution from many thread but I still unable to make this wifi card work properly (very slow, unable to connect to some wifi spot, etc.). I tried to compile the driver from the ralink website but it doesn't work. Tried to blacklist many mod, withou any result. So here are some command results, hope their help you help me: lspci sebastien@sebastien-portable:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6310] 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) 00:15.2 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB900 PCI to PCI bridge (PCIE port 2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 03:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe lsmod sebastien@sebastien-portable:~$ lsmod Module Size Used by rt2800pci 18715 0 arc4 12529 2 rt2800lib 58925 1 rt2800pci crc_ccitt 12667 1 rt2800lib rt2x00pci 14577 1 rt2800pci rt2x00lib 55301 3 rt2800pci,rt2800lib,rt2x00pci mac80211 506816 3 rt2800lib,rt2x00pci,rt2x00lib cfg80211 205544 2 rt2x00lib,mac80211 eeprom_93cx6 12725 1 rt2800pci rt2860sta 864748 0 snd_hda_codec_conexant 62128 1 snd_hda_codec_hdmi 32474 1 uvcvideo 72627 0 rts5139 351143 0 snd_hda_intel 33773 4 videodev 98259 1 uvcvideo snd_hda_codec 127706 3 snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec psmouse 87692 0 v4l2_compat_ioctl32 17128 1 videodev serio_raw 13211 0 k10temp 13166 0 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec sp5100_tco 13791 0 i2c_piix4 13301 0 snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi ideapad_laptop 18234 0 sparse_keymap 13890 1 ideapad_laptop rfcomm 47604 0 joydev 17693 0 snd_seq_midi_event 14899 1 snd_seq_midi bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 18 snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd mac_hid 13253 0 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid r8169 62099 0 radeon 804372 4 video 19596 0 wmi 19256 0 ttm 76949 1 radeon drm_kms_helper 46978 1 radeon drm 242038 6 radeon,ttm,drm_kms_helper i2c_algo_bit 13423 1 radeon iwconfig sebastien@sebastien-portable:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"4CE6763F0E0A" Mode:Managed Frequency:2.452 GHz Access Point: 4C:E6:76:3F:0E:0A Bit Rate=54 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:100 Missed beacon:0 eth0 no wireless extensions.

    Read the article

  • Launching Ops Center 12c

    - by user12601629
    Oracle Enterprise Manager Ops Center 12c is most ambitious version of the Ops Center tooling that we've ever released. I think that make it appropriate that we launched it in grand style! When it became clear we were going to be complete with the 12c final release about this time of year, the marketing team proposed that we roll the launch of 12c into Oracle OpenWorld Tokyo.  I thought that sounded like a fine idea!  You see, I have always loved Japan.  I even studied a bit of Japanese language back in school. OpenWorld Tokyo was an outstanding even this year.  It was held in Roppongi, one of the most stylish districts in Tokyo. And, to make things even better, the Sakura (cherry blossoms) were blooming.  If you've never been in Japan for cherry blossom season, it's a must see!  Here are a couple of pics for you. Here is a picture from Roppongi, near the conference.  Here's a picture near the Imperial Palace.  A couple of friends from the local sales team took me here before my flight out. So, now back to the product launch! We choose to launch the product in John Fowler's "Engineered Systems" keynote address.  It made perfect sense because of the close ties of Ops Center to the Systems portfolio of products.  It was a packed house for the keynote.  Here's a picture I took just before we started -- there were also hundreds more people in "overflow" rooms in other parts of the venue. Here's a picture of me on stage during the launch. While there are countless new features in Ops Center 12c that customers will love, I had to limit myself to discussing just three. Mission Critical Clouds Solaris 11 Engineered Systems So, what does Mission Critical Cloud mean?  It means we've expanded EM's cloud capabilities in a couple of key areas. First, we've expanded the "self service provisioning" capabilities we have to include SPARC -- not just x86.  Now you can build clouds of Solaris Zones with ease!  Second, we've much more deeply integrated high-end storage and network management into the cloud layers.  These may our IaaS story is now much more powerful! For Solaris 11, we didn't simply port our monitoring agent to S11.  That would have been easy, but also boring! We support S11 deeply.  Full access to the power of the IPS packaging system, the new virtualized networking stack, new Zones features, the Auto Install framework.  If you're ready to try Solaris 11 then Ops Center is ready for you. Last is on the area of Engineered Systems.  These combinations of hardware and software are fast and powerful. However, we're also on a mission to make them ever easier to manage.  We've made major strides with Ops Center 12c. Manage these systems as racks, not individual components.  The new capabilities for the new engineered systems like Exalogic and SPARC SuperCluster and striking. You can read more here: Oracle Unveils Oracle Enterprise Manager Ops Center 12c So, I'll wrap this up with one final bit of fun. One of my friends from the Oracle marketing department found a super cool place to get dinner.  It's a restaurant called Gonpachi. It turns out this is the place that inspired the scene in the Quentin Taratino movie Kill Bill where Uma Thurman fights 88 Ninjas.  Here is a picture I snapped while we were there. It was surely a good time. Check it out next time you're in Tokyo.

    Read the article

  • GoldenGate 12c - MySQL Active-Active Replication Setup

    - by Jinyu Wang-Oracle
    Active-active  (also called Master-Master or Bi-Directional) replication captures data changes from two or more systems and replicat the changes to synchronize the data.  Active-Active replication is often needed for high availability, load balancing and scaling out purposes.   Oracle GoldenGate is known to be one of the first and the best replication tool handling active-active replications. As of Oracle GoldenGate 12c, it provides (Refer to Oracle GoldenGate 12.1.2 Documentation - Configuring Oracle GoldenGate for Active-Active High Availability for more information) the followings: Robust loop-back prevention Comprehensive conflict resolution and detection support Heterogeneous support across different database versions and operation systems.  Oracle GoldenGate supports active-active configurations for DB2 on z/OS, LUW, and IBM i, MySQL, Oracle, SQL/MX,SQL Server, Sybase, and Teradata. However, the setup is different from database to database. In this example, I will show you how to setup an active-active data replication between two MySQL database instances. The example setup below is to have active-active replication between MySQL 5.5 and MySQL 5.6 instances and is shown as follows: MySQL 5.5 (Manager Port: 15105)  Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3305 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, PASSWORD mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl REPORTROLLOVER AT 05:30 ON saturday TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15106, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3305 targetdb test, userid root, password mysql sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge REPERROR (DEFAULT, ABEND) REPERROR(1062, IGNORE) map test.TCUSTMER, target test.TCUSTMER,colmap(usedefaults, region_code="region code"); map test.TCUSTORD, target test.TCUSTORD; MySQL 5.6 (Manager Port: 15106) Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3306 targetdb test, userid root, password mysql --assumetargetdefs sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge map test.TCUSTMER, target test.TCUSTMER, colmap(usedefaults, "region code"=region_code); map test.TCUSTORD, target test.TCUSTORD; Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3306 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, USERID mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/usr/local/mysql56/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15105, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; The setup parameters are quite self-explanatory. The key setup is to avoid the replication data  looping. Oracle GoldenGate for MySQL uses the information in the replication checkpoint table to identify the transaction applied by replicats and thus avoid extracting those transactions by Oracle GoldenGate extracts. The example setup in the extract in MySQL 5.5 instance is shown as follows.  TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl Setting up an active-active replication is often more complicated than this and requires the following additional considerations. I would elaborate on this in the follow-up discussions. 

    Read the article

  • Swap not available on System Monitor

    - by Zaki
    I had a swap partition of 1GB (RAM 1GB, Ubuntu 12.04 lts). Now swap is not shown on System Monitor neither can I hibernate my pc (sudo pm-hibernate). blkid output: /dev/sda1: UUID="B8B4FBB1B4FB706C" TYPE="ntfs" /dev/sda2: UUID="2ea7d608-2d89-4e41-9436-d05cb3ce8871" TYPE="swap" /dev/sda3: UUID="3219d03a-67e4-454b-8ce7-a27831846e35" TYPE="ext4" /dev/sda5: LABEL="Softwares" UUID="AC1CC3301CC2F47C" TYPE="ntfs" /dev/sda6: LABEL="Education" UUID="1E103E6C103E4B53" TYPE="ntfs" /dev/sda7: LABEL="Recreation" UUID="2CC8D181C8D149AA" TYPE="ntfs" /dev/sda8: LABEL="Miscellaneous" UUID="0274D6B174D6A727" TYPE="ntfs" /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=3219d03a-67e4-454b-8ce7-a27831846e35 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=2ea7d608-2d89-4e41-9436-d05cb3ce8871 none swap sw 0 0 free -m total used free shared buffers cached Mem: 991 867 123 0 27 418 -/+ buffers/cache: 421 569 Swap: 0 0 0 cat /proc/swaps Filename Type Size Used Priority fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9f369f36 Device Boot Start End Blocks Id System /dev/sda1 * 63 31471334 15735636 7 HPFS/NTFS/exFAT /dev/sda2 31471616 33470447 999416 82 Linux swap / Solaris /dev/sda3 33472512 62539775 14533632 83 Linux /dev/sda4 62541045 312592769 125025862+ f W95 Ext'd (LBA) /dev/sda5 62541108 125066024 31262458+ 7 HPFS/NTFS/exFAT /dev/sda6 125066088 187591004 31262458+ 7 HPFS/NTFS/exFAT /dev/sda7 187591068 250115984 31262458+ 7 HPFS/NTFS/exFAT /dev/sda8 250116048 312576704 31230328+ 7 HPFS/NTFS/exFAT swapon --all swapon: /dev/sda2: swapon failed: Invalid argument dmesg | grep -A 5 -B 5 -i swap [ 9.487404] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131645 [ 9.487413] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131330 [ 9.487418] EXT4-fs (sda3): 16 orphan inodes deleted [ 9.487420] EXT4-fs (sda3): recovery complete [ 9.578600] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 20.580539] Swap area shorter than signature indicates [ 20.588363] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.619443] udevd[330]: starting version 175 [ 20.649959] lp: driver loaded but no devices found [ 20.662972] [drm] Initialized drm 1.1.0 20060810 [ 20.675515] i915 0000:00:02.0: setting latency timer to 64 -- [ 72.288573] PM: thaw of drv:sr dev:3:0:0:0 complete after 178.143 msecs [ 72.288578] PM: thaw of drv:scsi_device dev:3:0:0:0 complete after 178.136 msecs [ 72.299677] PM: thaw of drv:scsi_device dev:2:0:0:0 complete after 189.270 msecs [ 72.309473] PM: thaw of devices complete after 202.763 msecs [ 72.309668] PM: writing image. [ 72.309670] PM: Cannot find swap device, try swapon -a. [ 72.309699] PM: Cannot get swap writer [ 72.329896] Restarting tasks ... done. [ 72.331777] PM: Basic memory bitmaps freed [ 72.331792] video LNXVIDEO:00: Restoring backlight state [ 72.420048] option1 ttyUSB0: option_instat_callback: error -84 [ 72.804047] option1 ttyUSB0: option_instat_callback: error -84 -- [ 145.960625] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 145.972036] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 172.430508] PPP BSD Compression module registered [ 172.455583] PPP Deflate Compression module registered [ 332.260789] type=1400 audit(1381814763.342:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 1913.030998] Swap area shorter than signature indicates [ 2022.530155] type=1400 audit(1381816453.610:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 4062.729509] Swap area shorter than signature indicates Please help. Thanks in advance. df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 14G 6.1G 7.0G 47% / udev 488M 4.0K 488M 1% /dev tmpfs 199M 868K 198M 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 496M 224K 496M 1% /run/shm

    Read the article

  • Columbus Regional Airport Authority Cuts Unbudgeted Carryover Costs for Capital Projects by 88% in One Year

    - by Melissa Centurio Lopes
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The Columbus Regional Airport Authority (CRAA) is a public entity that works to connect Central Ohio with the world. It oversees operations at three airports?Port Columbus International Airport, Rickenbacker International Airport, and Bolton Field Airport?and manages the Rickenbacker Inland Port and Foreign Trade Zone # 138. It was created in 2002 through the merger of the Columbus Airport Authority and Rickenbacker Port Authority. CRAA manages approximately 100 projects annually, including initiatives as diverse as road and runway construction and maintenance, terminal improvements, construction of a new air traffic control tower, technology infrastructure development, customer service projects, and energy conservation programs. CRAA deployed Oracle’s Primavera P6 Enterprise Project Portfolio Management to create a unified methodology for scheduling and capital cash flow management. Today, the organization manages schedules and costs for all of its capital projects by using Primavera to provide enterprise wide visibility. As a result, CRAA cut unbudgeted carryover costs from US$24.4 million in 2010 to US$3.5 million in 2011?an 88% improvement. "Oracle’s Primavera P6 and Primavera Contract Management are transforming project management at CRAA. We have enabled resource-loaded scheduling and expanded visibility into cash flow, which allowed us to reduce unbudgeted carryover by 88% in a single year.” – Alex Beaver, Manager, Project Controls Office, Columbus Regional Airport Authority Challenges Standardize project planning and management for the approximately 100 projects?including airport terminal upgrades to road and runway creation and rehabilitation?that the airport authority undertakes annually Improve control over project scheduling and budgets to reduce unplanned carryover costs from one fiscal year to the next Ensure on-time, on-budget completion of critical infrastructure projects that support the organization’s mission to connect Central Ohio with the world through its three airports and inland port Solutions · Used Primavera P6 Enterprise Project Portfolio Management to develop a unified methodology for scheduling and managing capital projects for the airport authority, including the organization’s largest capital project ever?a five-year runway construction project · Gained a single, consolidated view into the organization’s capital projects and the ability to drill down into resource-loaded schedules and cash flow, enabling CRAA to take action earlier to avert the impact of emerging issues?including budget overages and project delays · Cut unbudgeted carryover costs from US$24.4 million in 2010 to US$3.5 million in 2011?an 88% improvement Click here to view all of the solutions. “Oracle’s Primavera solutions are the industry standard for project management. They provide robust and proven functionality that give us the power to effectively schedule and manage budgets for a wide range of projects, from terminal maintenance, to runway work, to golf course redesign,” said Alex Beaver, manager, project controls office, Columbus Regional Airport Authority. Click here to read the full version of the customer success story.

    Read the article

  • Can't boot in Ubuntu after windows upgrade

    - by VanceAnce
    After my lastest update for Ubuntu and Windows XP, I got a Grub error on booting the next day. ls lists the following (without () ): sd0 sd1, msdos sd2 sd5 sd6 When I tried to get into one with (sd0,xy)/ it doesn't detect system or unknown file system error. I tried to boot to a live session with a Knoppix live CD and found out that all data exists. I also tried to recover with TestDisk and it finds all systems. Here is the test disk result: Start End Size in sectors 1 * HPFS - NTFS 0 1 1 7079 254 63 113740137 2 E extended LBA 7080 0 1 12161 254 63 81642330 5 L HPFS - NTFS 7080 1 1 10266 254 63 51199092 [Schule] X extended 12031 30 1 12161 254 63 2102625 6 L Linux Swap 12031 31 33 12161 254 63 2102530 I've 1 winxp-home, 1x Ubuntu (ext3+swap) and 1 winxp prof and then I wrote on mbr with TestDisk but I always get the same errors with Grub. What should I do? I need both XP and Ubuntu. Help me please. more infos in answers below - sry for thos confusing style but im working on diff live system and browsers and have to reboot always the boot info script output is also down below maybe an advanced user can correct my fail posting - after i can solve my issuse i will register here thanx and pls help me with those weired issues ! as i still cant just comment my own answer or those on top i again has to put it here as a sepperate answer..... (or even edit - maybe an browser failur using the live cds ... cause this posti can edit) here the bootinfo script output - but the result is the same as with TestDisk ... but it looks worse - cause it also doesnt detect my old ubuntu ... but there wasnt a eares process or overwrite process visibile ending the last working session output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== = Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda. sda1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files: /boot.ini /ntldr /NTDETECT.COM sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 63. Operating System: Windows XP Boot files: sda6: __________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 100.0 GB, 100030242816 bytes 255 heads, 63 sectors/track, 12161 cylinders, total 195371568 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 113,740,199 113,740,137 7 NTFS / exFAT / HPFS /dev/sda2 113,740,200 195,382,529 81,642,330 f W95 Extended (LBA) /dev/sda5 113,740,263 164,939,354 51,199,092 7 NTFS / exFAT / HPFS /dev/sda6 193,280,000 195,382,529 2,102,530 82 Linux swap / Solaris /dev/sda2 ends after the last sector of /dev/sda /dev/sda6 ends after the last sector of /dev/sda "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 6596D86768011128 ntfs /dev/sda5 1300D3B7744EC141 ntfs Schule /dev/sda6 5b95f2a1-4145-43a5-ac51-41d7dd32b213 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) ================================ sda1/boot.ini: ================================ [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect /NoExecute=OptOut multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /fastdetect [spybotsd] timeout.old=30 the last part shows that i now use the windows boot loader so that i can acces at least one OS but shouldnt i also get acces to my ubuntu partitions with live-linux-cds ? or do i have to boot with grub to get to those files only ??

    Read the article

  • Converting a PV vm back into an HVM vm

    - by wim.coekaerts
    I have been doing some Oracle VM benchmark stuff in the last week or 2 in my off hours and yesterday I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel. It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps. A PV kernel uses pygrub and a paravirt kernel image that lives on the vm image virtual disk. since this disk image does not have to be bootable it doesn't contain a boot sector and if you just restart the VM in hvm mode the virtual bios will just not do much as it can't start the boot process from disk The first thing I do is make a backup of my vm.cfg file :-) and then edit it as follows : the original file contains : bootloader = '/usr/bin/pygrub' I replace that with : acpi = 1 apic = 1 builder = 'hvm' device_model = '/usr/lib/xen/bin/qemu-dm' kernel = '/usr/lib/xen/boot/hvmloader' then changing the disk files. I change my xvd disks to hd disks and I copy over the iso image of my instal lDVD. In the case of my VM template it was based on OL5U4 So I downloaded Enterprise-R5-U4-Server-x86_64-dvd.iso and added it as a cd device. disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,xvda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,xvdb,w', ] to disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,hda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,hdb,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Enterprise-R5-U4-Server-x86_64-dvd.iso, hdc:cdrom,r', ] boot='d' for the network devices (vifs) I change : vif = ['bridge=xenbr2,type=netfront'] to vif = ['bridge=xenbr2,type=ioemu'] That should do it. Next, inside the VM, I copy over the regular kernel rpm that I want to end up running in hvm mode. In this example case it was : kernel-2.6.18-164.0.0.0.1.el5.x8664.rpm. I will use that later on in the process. I put this kernel simply in /root At this point I just start the vm with xm create vm.cfg and start my vnc console to the vm console. Oracle Linux will boot from the iso image, I just go through the install steps and click on UPgrade existing (not re-install). Because the VM is the same as the ISO the install won't actually do anything and it will run through instantly. When the "Reboot" button pops up, don't reboot. Switch to the command prompt console. hi alt-f2 to go to the shell prompt. Now it's easy : umount /mnt/sysimage/boot cd /mnt/sysimage chroot . mount /dev/hda1 (if that was your /boot partition) export PATH=/sbin:$PATH (just to clean that up) edit /etc/modprobe.conf and comment out the xen modules (just put a # in front) Install grub. if your /boot is hda1 then that is (hd0,0) $ grub root (hd0,0) setup (hd0) exit grub now you have a good bootsector, grub installed and you have your grub.conf file Install the new kernel cd root (this is your old /root in your pv image) rpm -ivh remove (or comment out) boot='d' in your vm.cfg restart the VM and you should be good to go, regular grub should start and load your environment. Caveats : this assumes you used labels for your filesystems. if /etc/fstab were to have devices listed then you would have to rename these device before rebooting as well. If you had a /dev/xvda disk then this would be /dev/hda or /dev/sda. All in all it is a relatively short and simple process.

    Read the article

  • Converting a PV vm back into an HVM vm

    - by wim.coekaerts
    I have been doing some Oracle VM benchmark stuff in the last week or 2 in my off hours and yesterday I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel. It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps. A PV kernel uses pygrub and a paravirt kernel image that lives on the vm image virtual disk. since this disk image does not have to be bootable it doesn't contain a boot sector and if you just restart the VM in hvm mode the virtual bios will just not do much as it can't start the boot process from disk The first thing I do is make a backup of my vm.cfg file :-) and then edit it as follows : the original file contains : bootloader = '/usr/bin/pygrub' I replace that with : acpi = 1 apic = 1 builder = 'hvm' device_model = '/usr/lib/xen/bin/qemu-dm' kernel = '/usr/lib/xen/boot/hvmloader' then changing the disk files. I change my xvd disks to hd disks and I copy over the iso image of my instal lDVD. In the case of my VM template it was based on OL5U4 So I downloaded Enterprise-R5-U4-Server-x86_64-dvd.iso and added it as a cd device. disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,xvda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,xvdb,w', ] to disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,hda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,hdb,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Enterprise-R5-U4-Server-x86_64-dvd.iso, hdc:cdrom,r', ] boot='d' for the network devices (vifs) I change : vif = ['bridge=xenbr2,type=netfront'] to vif = ['bridge=xenbr2,type=ioemu'] That should do it. Next, inside the VM, I copy over the regular kernel rpm that I want to end up running in hvm mode. In this example case it was : kernel-2.6.18-164.0.0.0.1.el5.x8664.rpm. I will use that later on in the process. I put this kernel simply in /root At this point I just start the vm with xm create vm.cfg and start my vnc console to the vm console. Oracle Linux will boot from the iso image, I just go through the install steps and click on UPgrade existing (not re-install). Because the VM is the same as the ISO the install won't actually do anything and it will run through instantly. When the "Reboot" button pops up, don't reboot. Switch to the command prompt console. hi alt-f2 to go to the shell prompt. Now it's easy : umount /mnt/sysimage/boot cd /mnt/sysimage chroot . mount /dev/hda1 (if that was your /boot partition) export PATH=/sbin:$PATH (just to clean that up) edit /etc/modprobe.conf and comment out the xen modules (just put a # in front) Install grub. if your /boot is hda1 then that is (hd0,0) $ grub root (hd0,0) setup (hd0) exit grub now you have a good bootsector, grub installed and you have your grub.conf file Install the new kernel cd root (this is your old /root in your pv image) rpm -ivh remove (or comment out) boot='d' in your vm.cfg restart the VM and you should be good to go, regular grub should start and load your environment. Caveats : this assumes you used labels for your filesystems. if /etc/fstab were to have devices listed then you would have to rename these device before rebooting as well. If you had a /dev/xvda disk then this would be /dev/hda or /dev/sda. All in all it is a relatively short and simple process.

    Read the article

  • Microsoft Build 2012 Day 1 Keynote Summary

    - by Tim Murphy
    So I have finally dried the tears after watching the Keynote for Build 2012.  This wasn’t because it was an emotional presentation, but because for the second year I missed the goodies.  Each on site attendee got a Surface RT, a Lumia 920 and a voucher for 100GB of SkyDrive storage. The event was opened with the announcement that in the three days since the launch of Windows 8 over 4 million upgrades have been sold.  I don’t care who you are that is an impressive stat.  Ballmer then spent a fair amount of time remaking the case for the Windows and Windows Phone platforms similar to what we have heard over the last to launch events. There were some cool, but non-essential demos.  The one that was the most fun was the Perceptive Pixel 82” slate device.  At first glance I wondered why I would ever want such a device, but then Ballmer explained it’s possible use for schools and boardrooms.  The actually made sense. Then things got strange.  Steve started explaining features that developers could leverage.  Usually this type of information is left to the product leads.  He focused on the integration with the Charms features such as Search and Share. Steve “Guggs” Guggenheim showed off an app that would appeal to my kids from Disney called “Agent P” which is base on Phineas and Ferb.  Then he got to the meat of the presentation.  We found out that you could add a tile that can be used to sell ad space.  In the same vein we also found out that you could use Microsoft’s, Paypal’s or any commerce engine of your own creation or choosing. For those who are interested in sports and especially developing sports apps you would have found the small presentation from Michael Bayle of ESPN.  He introduced the ESPN app which has tons of features.  For the developers in the crowd he also mentioned that ESPN has an API available at developer.espn.com. During the launch events we were told apps were coming.  In this presentation we were actually shown a scrolling list of logos and told about a couple of them.  Ballmer mentioned specifically Twitter, SAP and DropBox.  These are impressive names that were just a couple of the list impressive names. Steve Ballmer addressed the question of why you should develop for the Windows 8 platform.  He feels that Microsoft has the best commercial terms for developers, a better way to build apps than other platforms and a variety of form factors.  His key point though was the available volume of customers given the current Windows install base and assuming even a flat growth of the platform.  This he backed with a promise that Microsoft is going to do better at marketing and you won’t be able to avoid the ads that they are bringing out. The last section of the key note was present by Kevin Gallo from the Windows Phone team.  This was the real reason I tuned into the webcast.  He impressed upon those watching that the strength of developing for the Microsoft platform is the common programming model that now exist.  While there are difference between form factor implementations you can leverage code across them. He claimed that 90% of developer requests for Windows Phone 8 had been implemented.  These include: More controls with better performance Better live tiles including lock screen integration Speech support in custom apps Easier submission to the market place App camera integration VOIP and chat support Bluetooth and NFC support Native C++ development Direct 3D development   The quote from Kevin that stood out for me was that “Take your Dramamine and buckle your seatbelt type of games are coming to Windows Phone 8”.  He back this up by displaying a list of game development frameworks and then having Unity come out and do a demo. Ok, almost done … The last two things of note for me were the announcement that the SDK is immediately available at dev.windowsphone.com and that they were reducing the cost of an individual developer account to $8 for the next 8 days. Let the development commence. del.icio.us Tags: Build 2012,Windows 8,Windows Phone 8,Windows Phone

    Read the article

  • 13 Lösungen für eine höhere Sicherheit in einer Oracle Datenbank (Best Practices)

    - by C.Muetzlitz
    Externe Einflüsse wie Gesetze fordern die IT auf, (unsere) Daten zu schützen. Doch wie prüft man die eingestellte Sicherheit einer Oracle Datenbank überhaupt? Ist die geforderte Sicherheit ausreichend umgesetzt und zwar im Idealfall entsprechend dem notwendigen Schutzbedarf? Wann haben Sie eigentlich die Sicherheit Ihrer Oracle Datenbank das letzte Mal überprüft? Und noch besser gefragt, kennen Sie die Bedrohungen und die davon abgeleiteten Risiken? Alles Fragen deren Antworten ein verantwortlicher Anwendungsbesitzer sofort parat haben sollte oder sehen Sie das anders? Wie kann man sich am besten vor Bedrohungen schützen? Die einzige richtige Antwort auf diese Frage ist, durch Informationen und daraus abgeleitetes Wissen. Nun umfassen Informationen und das darin versteckte Wissen wahrscheinlich sehr viele Quellen. D.h. es wird immer schwieriger sich das richtige Wissen anzueignen und dieses Wissen für den Schutz von Daten und Datenbanken anzuwenden.Betrachtet man die Oracle Datenbank, dann empfehle ich zwei wesentliche Bereiche, die man tun muss bzw. wissen sollte. Die Best Practices Lösungen kennen, die man implementieren sollte und teilweise muss, um gute Sicherheit zu garantieren.Ich nenne diesen Bereich „13 Lösungen für eine höhere Sicherheit in einer Oracle Datenbank (Best Practices)“ Wie sieht der wirkliche Sicherheitszustand einer Oracle Datenbank aus.Diesen Bereich nenne ich „Check Oracle DB Security“ In diesem Beitrag möchte ich Sie nun in die Grundlagen einer guten Oracle Datenbank Sicherheit einführen und Sie befähigen, den Sicherheitszustand Ihrer Datenbank selber bestimmen zu können. 13 Lösungen für eine höhere Sicherheit in einer Oracle Datenbank (Best Practices)“  Password-Management aktiveren:Seien Sie sich bewusst, dass schwache Passwords eine hohe Bedrohung bedeuten. Aktivieren Sie ein vernünftiges Password Management Kennen Sie den Funktionsumfang Ihrer aktuellen Datenbank Version, auch die Funktionen, die nicht mehr unterstützt werden.Der "New Feature und Upgrade Guide" sollte eine Pflichtlektüre werden. Implementieren Sie eine passende Mindestsicherheit.Oracle liefert hier viele Vorgaben. Haben Sie das Rollen- und Account Management im GriffHier geht es um eine kontrollierte Privilegien-Vergabe (Least Privileg), eine Zwecktrennung im Account Management und eine andauernde Überprüfung des Rollenmanagements und Zugriffskonzepts Sicheres Datenbank Link Konzept implementierenGerade im Bereich der Datenintegration werden wiederholt DB Links in der Datenbank konfiguriert. Diese Links eröffnen u.U. unkontrollierte Zugriffe auf entfernte Datenbanken. Tracken Sie den Zugriff und setzen Sie ein sicheres DB Link Konzept um. Oracle liefert hier die entsprechenden Vorgaben. Definieren Sie Schutz-Policies für Ihre Anwendungen.Hierunter fällt z.B. ein richtiges Anwendungs-Owner und Anwendungs-User Setup Implementieren Sie den notwendigen Datenschutz für wichtige DatenKennen Sie die Daten, die geschützt werden müssen und schützen Sie diese angemessen. Kontrollieren Sie den Ressourcenverbrauch in Ihrer Datenbank Implementieren Sie eine sinnvolle Zwecktrennung in der DatenbankAuch bei der Datenbank ist es sinnvoll eine Zwecktrennung zu implementieren. Schalten Sie eine sinnvolle und gesetzeskonforme Protokollierung ein.Gesetze erfordern das und Oracle gibt eine Mindestprotokollierung vor. Implementieren Sie Prozesse, die den guten Zustand der Datenbank erhalten Führen Sie regelmäßige Health- Checks durchOracle liefert z.B. mit dem Enterprise Manager eine vollständige Library. Definieren Sie ein funktionierendes Patch-ManagementKennen Sie die Critical Patch Updates und handeln Sie falls notwendig. Check Oracle DB Security oder wer den Sicherheitszustand nicht kennt, wird auch keine Maßnahmen ergreifen Den Sicherheitszustand einer Oracle Datenbank zu überprüfen, ist sehr wichtig. Hierfür kann man verschiedene Anwendungen nutzen, die im Markt erhältlich sind. Eine gute Entscheidung wäre z.B. den Oracle Enterprise Manager (Cloud Control) mit dem Lifecycle Management zu nutzen, der periodisch den Sicherheitszustand für Sie ermittelt. Eine manuelle Überprüfung ist auch möglich, erfordert aber tiefes Wissen. Doch auch trotz der hohen Wissensanforderung ist ein Verstehen, wie man eine Oracle Datenbank manuell auf Sicherheit überprüft, wichtig. Vertrauen Sie nicht mehr auf Vermutungen, sondern nehmen Sie die Sicherheit Ihrer Datenbank ernst und lernen Sie den realen Zustand Ihrer Datenbank kennen. Wissen über reale Zustände und Wissen über geeignete Konzepte schützen. Erst dann können Sie entscheiden, welche Maßnahmen tatsächlich notwendig sind. Weiterführende Informationen: Oracle Online Dokumentation für die Datenbank Verschiedene Artikel in der Knowledge Base vom Oracle Support Das neue Buch „Oracle Security in der Praxis. Vollständige Sicherheitsüberprüfung Ihrer Oracle Datenbank“.

    Read the article

  • Mind Reading with the Raspberry Pi

    - by speakjava
    Mind Reading With The Raspberry Pi At JavaOne in San Francisco I did a session entitled "Do You Like Coffee with Your Dessert? Java and the Raspberry Pi".  As part of this I showed some demonstrations of things I'd done using Java on the Raspberry Pi.  This is the first part of a series of blog entries that will cover all the different aspects of these demonstrations. A while ago I had bought a MindWave headset from Neurosky.  I was particularly interested to see how this worked as I had had the opportunity to visit Neurosky several years ago when they were still developing this technology.  At that time the 'headset' consisted of a headband (very much in the Bjorn Borg style) with a sensor attached and some wiring that clearly wasn't quite production ready.  The commercial version is very simple and easy to use: there are two sensors, one which rests on the skin of your forehead, the other is a small clip that attaches to your earlobe. Typical EEG sensors used in hospitals require lots of sensors and they all need copious amounts of conductive gel to ensure the electrical signals are picked up.  Part of Neurosky's innovation is the development of this simple dry-sensor technology.  Having put on the sensor and turned it on (it powers off a single AAA size battery) it collects data and transmits it to a USB dongle plugged into a PC, or in my case a Raspberry Pi. From a hacking perspective the USB dongle is ideal because it does not require any special drivers for any complex, low level USB communication.  Instead it appears as a simple serial device, which on the Raspberry Pi is accessed as /dev/ttyUSB0.  Neurosky have published details of the command protocol.  In addition, the MindSet protocol document, including sample code for parsing the data from the headset, can be found here. To get everything working on the Raspberry Pi using Java the first thing was to get serial communications going.  Back in the dim distant past there was the Java Comm API.  Sadly this has grown a bit dusty over the years, but there is a more modern open source project that provides compatible and enhanced functionality, RXTXComm.  This can be installed easily on the Pi using sudo apt-get install librxtx-java.  Next I wrote a library that would send commands to the MindWave headset via the serial port dongle and read back data being sent from the headset.  The design is pretty simple, I used an event based system so that code using the library could register listeners for different types of events from the headset.  You can download a complete NetBeans project for this here.  This includes javadoc API documentation that should make it obvious how to use it (incidentally, this will work on platforms other than Linux.  I've tested it on Windows without any issues, just by changing the device name to something like COM4). To test this I wrote a simple application that would connect to the headset and then print the attention and meditation values as they were received from the headset.  Again, you can download the NetBeans project for that here. Oracle recently released a developer preview of JavaFX on ARM which will run on the Raspberry Pi.  I thought it would be cool to write a graphical front end for the MindWave data that could take advantage of the built in charts of JavaFX.  Yet another NetBeans project is available here.  Screen shots of the app, which uses a very nice dial from the JFxtras project, are shown below. I probably should add labels for the EEG data so the user knows which is the low alpha, mid gamma waves and so on.  Given that I'm not a neurologist I suspect that it won't increase my understanding of what the (rather random looking) traces mean. In the next blog I'll explain how I connected a LEGO motor to the GPIO pins on the Raspberry Pi and then used my mind to control the motor!

    Read the article

  • questions about dual-boot install Ubuntu 10.04 and Windows 7 on same hard drive

    - by Tim
    I'd like to dual-boot install Ubuntu 10.04 on the same hard drive as Windows 7 which has already been installed. As to sources on the internet: I found a website iinet about dual-boot installation of Ubuntu 10.10 and Windows 7 on the same hard drive, which I think more specific than the one on Ubuntu Community without specific version of the OSes. Since I am installing Ubuntu 10.04 instead of 10.10, my question is whether their installers are same or almost same and if I can follow iinet for my dual-boot installation? Or are there better websites for information about dual-boot installtion of Ubuntu 10.04 and Windows 7? As to shrinking Windows partitions to make free space for Ubuntu partitions: iinet uses the partition software in Ubuntu's installer to shrink the Windows partition. But I saw in many website that the partition software in Ubuntu's installer cannot guarantee shrinking Windows 7 partitions successfully, so they recommended in general to shrink Windows partitions under Windows itself using its softwares. For example, in Ubuntu Community, it says: Some people think that the Windows partition must be resized only from within Windows Vista and Windows 7 using the shrink/resize option. ... If you use GParted Partition Editor in the Ubuntu Live CD be careful. So I was wondering which way to go in my situation? As to partition for bootloader files: In iinet, I don't see there is a partition created and dedicated to boot files (i.e. Grub files). However, I saw in many websites strongly suggesting using a boot partition for Grub files, especially for the purpose of separation and protection from installed OS files. I was wondering which way I should choose and why? As to installing bootloader Grub, in iinet, I see that to install Grub it only needs to specify the hard drive device for bootloader installation. However, in ubuntuguide(for more than 2 OSes and Ubuntu 9.04), some commands are needed to run in order to put Grub configuration files in MBR, and OS partition, for the chain-load process (where to find the files for the next stage). In Ubuntu Community, there are some related sentences which I don't quite understand how to do in practice: the only thing in your computer outside of Ubuntu that needs to be changed is a small code in the MBR (Master Boot Record) of the first hard disk. The MBR code is changed to point to the boot loader in Ubuntu. If you have a problem with changing the MBR code, you might prefer to just install the code for pointing to GRUB to the first sector of your Ubuntu partition instead. If you do that during the Ubuntu installation process, then Ubuntu won't boot until you configure some other boot manager to point to Ubuntu's boot sector. Windows Vista no longer utilizes boot.ini, ntdetect.com, and ntldr when booting. Instead, Vista stores all data for its new boot manager in a boot folder. Windows Vista ships with an command line utility called bcdedit.exe, which requires administrator credentials to use. You may want to read http://go.microsoft.com/fwlink/?LinkId=112156 about it. Using a command line utility always has its learning curve, so a more productive and better job can be done with a free utility called EasyBCD, developed and mastered in during the times of Vista Beta already. EasyBCD is user friendly and many Vista users highly recommend EasyBCD. In what is quoted above, I was wondering how exactly I should change the MBR code to point to the bootloader in Ubuntu? if I fail to change MBR code, are the other suggested boot managers being bcdedit.exe and EasyBCD in Windows? With the three sources above, which one shall I follow? Thanks and regards

    Read the article

  • How do I revert updates/tweaks to get to a usable GUI?

    - by Frankenmartin
    I just installed 12.04 the other day and then ran into trouble upon restarting after installing updates. What I did before the problem occurred: I did not make many changes before this problem occurred. Changes I did make included: Downloading and installing Adobe Flash Player (off topic but: I am under the impression that Java, "C&C" and Shockwave can not be run in Ubuntu. Could anybody verify this?) I also installed gnome-tweak-tool and used it to install several themes. These themes worked well until restarting after the update. Is it possible that one of these themes caused the problem (in combination with the update or because of the restart)? Installed 215 updates from update manager and restarted my system. Current Situation: Unity 3D is unusable since restarting after running updates. When I log in after entering my password the following things happen: the overhead panel disappears and the screen goes black for a minute my wallpaper flashes for a couple seconds but then the screen goes black again after another minute the wallpaper reappears but nothing else does and I am not able to open anything or even right click. after 5 minutes I can finally get a right click menu eventually a box comes up warning about a Compiz failure and asking to let it quit--which I did. Using the right click functionality I was able to create a new folder on the desktop and use this to open a file browser. In doing so I noticed that the downloads I had made were missing (music, image files, etc., even after unpacking several .zip and .rar files) even though I believe that everything should still be there. Any new windows that I create are un-closable/minimizable/movable/etc, because the window bars are missing. I have tried rebooting several times but the results are the same. I was able to browse some off the System Settings windows by clicking on the wallpaper link in the right click menu. In doing so I navigated into the update manager and noticed that updates were selected to be accepted from some "unsupported sources". I do not recall setting these options myself and wonder why these--potentially dangerous--options would be selected by default. Unity 2D is usable but not free of bugs--I stumbled across the ability to log into a Unity 2D session while trying to log into Unity 3D. So far I have only noticed one bug in Unity 2D: the close, minimize and maximize buttons are invisible--however they are still usable despite being invisible. What I need: I'm very new to Linux and Ubuntu and still am in the feeling out stages. As such I will have some trouble answering clarifying questions. I haven't used the terminal yet and would probably not be comfortable using it without very clear instructions. What I do need is to know how I can roll back/remove all those updates so I can use my computer regularly again. I do believe that I could follow step-by-step instructions as long as they are clear and concise if someone knows what my problem is.

    Read the article

  • XNA RenderTarget2D Sample

    - by Michael B. McLaughlin
    I remember being scared of render targets when I first started with XNA. They seemed like weird magic and I didn’t understand them at all. There’s nothing to be frightened of, though, and they are pretty easy to learn how to use. The first thing you need to know is that when you’re drawing in XNA, you aren’t actually drawing to the screen. Instead you’re drawing to this thing called the “back buffer”. Internally, XNA maintains two sections of graphics memory. Each one is exactly the same size as the other and has all the same properties (such as surface format, whether there’s a depth buffer and/or a stencil buffer, and so on). XNA flips between these two sections of memory every update-draw cycle. So while you are drawing to one, it’s busy drawing the other one on the screen. Then the current update-draw cycle ends, it flips, and the section you were just drawing to gets drawn to the screen while the one that was being drawn to the screen before is now the one you’ll be drawing on. This is what’s meant by “double buffering”. If you drew directly to the screen, the player would see all of those draws taking place as they happened and that would look odd and not very good at all. Those two sections of graphics memory are render targets. All a render target is, is a section of graphics memory to which things can be drawn. In addition to the two that XNA maintains automatically, you can also create and set your own using RenderTarget2D and GraphicsDevice.SetRenderTarget. Using render targets lets you do all sorts of neat post-processing effects (like bloom) to make your game look cooler. It also just lets you do things like motion blur and lets you create mirrors in 3D games. There are quite a lot of things that render targets let you do. To go along with this post, I wrote up a simple sample for how to create and use a RenderTarget2D. It’s available under the terms of the Microsoft Public License and is available for download on my website here: http://www.bobtacoindustries.com/developers/utils/RenderTarget2DSample.zip . Other than the ‘using’ statements, every line is commented in detail so that it should (hopefully) be easy to follow along with and understand. If you have any questions, leave a comment here or drop me a line on Twitter. One last note. While creating the sample I came across an interesting quirk. If you start by creating a Windows Game, and then make a copy for Windows Phone 7, the drop-down that lets you choose between drawing to a WP7 device and the WP7 emulator stays grayed-out. To resolve this, you need to right click on the Windows Phone 7 version in the Solution Explorer, and choose “Set as StartUp Project”. The bar will then become active, letting you change the target you which to deploy to. If you want another version to be the one that starts up when you press F5 to start debugging, just go and right-click on that version and choose “Set as StartUp Project” for it once you’ve set the WP7 target (device or emulator) that you want.

    Read the article

  • ArchBeat Link-o-Rama Top 10 for October 21-27, 2012

    - by Bob Rhubart
    The Top 10 most popular items shared on the OTN ArchBeat Facebook Page for the week of October 21-27, 2012. OTN Architect Day: Los Angeles This is your brain on IT architecture. Stuff your cranium with architecture by attending Oracle Technology Network Architect Day in Los Angeles, October 25, 2012, at the Sofitel Los Angeles, 8555 Beverly Boulevard, Los Angeles, CA 90048. Technical sessions, panel Q&A, and peer roundtables—plus a free lunch. [NOTE: The event was last week, of course. Big thanks to the session presenters and especially to those Angelinos who came out for the event.] WebLogic Server 11gR1 Interactive Quick Reference"The WebLogic Server 11gR1 Administration interactive quick reference," explains Juergen Kress, "is a multimedia tool for various terms and concepts used in WebLogic Server architecture. This tool is available for administrators for online or offline use. This is built as a multimedia web page which provides descriptions of WebLogic Server Architectural components, and references to relevant documentation. This tool offers valuable reference information for any complex concept or product in an intuitive and useful manner." Podcast: Are You Future Proof? The latest OTN ArchBeat Podcast series features Oracle ACE Directors Ron Batra, Basheer Khan, and Ronald van Luttikhuizen, three practicing architects in an open discussion about how changes in enterprise IT are raising the bar for success for software architects and developers. Play Oracle Vanquisher Here's a little respite from whatever it is you normally spend your time on. Oracle Vanquisher is an online diversion that makes a game of data center optimization. According to the description: "Armed with a cool Oracle vacuum pack suit and a strategic IT roadmap, you will thwart threats and optimize your data center to increase your company’s stock price and boost your company’s position." Mainly you avoid electric shock and killer birds. The current high score belongs to someone identified as 'TEN." My score? Never mind. Advanced Oracle SOA Suite OOW 2012 PresentationsThe Oracle SOA Product Management team has compiled a complete list of all twelve of their Oracle SOA Suite presentations from Oracle OpenWorld 2012, with links to the slide decks. OAM and OIM 11g Academies Looking for technical how-to content covering Oracle Access Manager and Oracle Identity Manager? The people behind the Oracle Middleware Security blog have indexed relevant blog posts into what they call "Academies." "These indexes contain the articles we’ve written that we believe provide long lasting guidance on OAM and OIM. Posts covered in these series include articles on key aspects of OAM and OIM 11g, best practice architectural guidance, integrations, and customizations." Oracle’s Analytics, Engineered Systems, and Big Data Strategy | Mark Rittman Part 1 of 3 in Oracle ACE Director Mark Rittman's series on Oracle Exalytics, Oracle R Enterprise and Endeca. Oracle ACE Directors Nordic Tour 2012 : Venues and BI Presentations | Mark RittmanOracle ACE Director Mark Rittman shares information on the Oracle ACE Director Tour, as the community leaders make their way through the land of the midnight sun, with events in Copenhagen, Stockholm, Oslo and Helsinki. Following the Thread in OSB | Antony Reynolds Antony Reynolds recently led an Oracle Service Bus POC in which his team needed to get high throughput from an OSB pipeline. "Imagine our surprise when, on stressing the system, we saw it lock up, with large numbers of blocked threads." He shares the details of the problem and the solution in this extensive technical post. OW12: Oracle Business Process Management/Oracle ADF Integration Best Practices | Andrejus Baranovskis The Oracle OpenWorld presentations keep coming! Oracle ACE Director Andrejus Baranovskis shares the slides from "Oracle Business Process Management/Oracle ADF Integration Best Practices," co-presented with Danilo Schmiedel from Opitz Consulting. Thought for the Day "Not everything that can be counted counts, and not everything that counts can be counted." — Albert Einstein (March 14, 1879 – April 18, 1955) Source: Quotes For Software Engineers

    Read the article

  • Booting the liveCD/USB in EFI mode fails on Samsung Tablet XE700T1A

    - by F.L.
    My tablet is Samsung Series 7 Slate (XE700T1A-A02FR (French Language)). It operates an Intel Sandy Bridge architecture. The main issue about this tablet is that it ships with an installed Windows 7 in (U)EFI mode (GPT partition table, etc.), so I'd like to get an EFI dual boot with Ubuntu. But it seems I can't boot on the liveCD in EFI mode. It starts loading (up to initrd), but I then get a blank (black) screen. I've tried the nomodeset kernel option (as well as removing quiet and splash) with no luck. [2012-09-27] I have used the Ubuntu 12.04.1 Desktop ISO (I have read somewhere that it is the only one that can boot in EFI mode). I'd say this has something to do with UEFI since the LiveCD boots in bios mode but not in efi mode. Besides, I am not sure my boot info will help, since I can't boot the LiveCD in EFI mode. As a result I can't install ubuntu in EFI mode. So it would be the boot info from the liveCD boot in bios mode. This happens on a ubuntu-12.04.1-desktop-amd64 iso used on a LiveUSB. Live USB was created by dd'ing the iso onto the full disk device (i.e. /dev/sdx no number) of the Flash drive. I have also tried copying the LiveCD files on a primary GPT partition, but with no luck, I just get the grub shell, no menu, no install option. [2012-09-28] I tried today a flash drive created with Ubuntu's Startup Disk Creator and the alternate 12.04.1 64 bit ISO. I get a grub menu in text mode (which meens it did start in efi mode) with install options / test options. But when I start any of these, I simply get a black screen (no cursor, neither mouse nor text-mode cursor). I tried removing the 'quiet' option and adding nomodeset and acpi=off, but it didn't do any good. So this is the same result as for the LiveCD. [2012-10-01] I have tried with a version of the secure remix version via usb-creator-gtk. The boot on the USB key has the same symptoms. Boot in EFI mode is impossible (I have menu but whatever entry I choose, I get the blank screen problem). The boot in BIOS mode works, I did the install. Then I used boot-repair to try installing grub-efi and get a system that would boot in efi mode. But I can't boot this system, because the EFI firmware doesn't seem to detect that sda contains a valid efi partition. Here is the resulting boot-info Boot info 1253554 [2012-10-01] Today, I have reinstalled the pre-shipped version of windows 7, and then installed ubuntu from a secure-remix iso dumped on USB flash drive vie usb-creator-gtk booted in BIOS mode. When install ended, I said "continue testing" then I used boot-repair to try get the bootloader installed. Now, when I boot the tablet, I get the grub menu, it can chainload windows 7 flawlessly. But when I try to start one of the ubuntu options I get the same old blank screen. Here is the new boot-info: Boot info 1253927 [2012-10-01] I tried installing the 3.3 kernel by chrooting a live usb boot (secure remix again) into the installed system. Same symptoms. I feel the key to this is that the device's efi firmware (which is EFI v2.0) would expose the graphics hardware in a way that prevents the kernel to initialize it, and thus prevents it from booting (the kernel stops all drive access just after the screen turns kind of very dark purple). Here is some info on the UEFI firmware as given by rEFInd: EFI revision: 2.00 Platform: x86_64 (64 bit) Firmware: American Megatrends 4.635 Screen Output: Graphics Output (UEFI), 800x600 [2012-10-08] This week end I tried loading the kernel with elilo. Eventhough I didn't have more luck on booting the kernel, elilo gives more info when loading the kernel. I think the next step is trying to load a kernel with EFI stub directly.

    Read the article

  • Oracle Retail Mobile Point-of-Service

    - by David Dorf
    When most people discuss mobile in retail, they immediately go to shopping applications.  While I agree the consumer side of mobile is huge, I believe its also important to arm store associates with mobile tools.  There are around a dozen major roll-outs of mobile POS to chain retailers, and all have been successful.  This does not, however, signal the demise of traditional registers.  Retailers will adopt mobile POS slowly and reduce the number of fixed registers over time, but there's likely to be a combination of both for the foreseeable future.  Even Apple retains at least one fixed register in every store, you just have to know where to look. The business benefits for mobile POS are pretty straightforward: 1. Faster checkout.  Walmart's CFO recently reported that for every second they shave off the average transaction time, they can potentially save $12M a year in labor.  I think its more likely that labor will be redeployed to enhance the customer experience. 2. Smarter associates.  The sales associates on the floor need the same access to information that consumers have, if not more.  They need ready access to product details, reviews, inventory, etc. to meet consumer expectations.  In a recent study, 40% of consumers said a savvy store associate can impact their final product selection more than a website. 3. Lower costs.  Mobile POS hardware (iPod touch + sled) costs about a fifth of fixed registers, not to mention the reclaimed space that can be used for product displays. But almost all Mobile POS solutions can claim those benefits equally.  Where there's differentiation is on the technical side.  Oracle recently announced availability of the Oracle Retail Mobile Point-of-Service, and it has three big technology advantages in the market: 1. Portable. We used a popular open-source component called PhoneGap that abstracts the app from the underlying OS and hardware so that iOS, Android, and other platforms could be supported.  Further, we used Web technologies such as HTML5 and JavaScript, which are commonly known by many programmers, as opposed to ObjectiveC which is more difficult to find.  The screen can adjust to different form-factors and sizes, just like you see with browsers.  In the future when a new, zippy device gets released, retailers will have the option to move to that device more easily than if they used a native app. 2. Flexible.  Our Mobile POS is free with the Oracle Retail Point-of-Service product.  Retailers can use any combination of fixed and mobile registers, and those ratios can change as required.  Perhaps start with 1 mobile and 4 fixed per store, then transition over time to 4 mobile and 1 fixed without any additional software licenses.  Our scalable solution supports lots of combinations. 3. Consistent.  Because our Mobile POS is fully integrated to our traditional POS, the same business logic is reused.  Third-party Mobile POS solutions often handle pricing, promotions, and tax calculations separately leading to possible inconsistencies within the store.  That won't happen with Oracle's solution. For many retailers, Mobile POS can lower costs, increase customer service, and generally enhance a consumer's in-store experience.  Apple led the way, but lots of other retailers are discovering the many benefits of adding mobile capabilities in their stores.  Just be sure to examine both the business and technology benefits so you get the most value from your solution for the longest period of time.

    Read the article

  • Join us on our Journey to be #1 in SaaS!

    - by jessica.ebbelaar(at)oracle.com
    WHY ORACLE? Oracle is a robust organization that has proven to maintain growth and innovation at all levels with a constant evolving attitude. The main ingredient of Oracles success is the 105.000 talented employees who constantly amaze each other in building a better and more innovative organization. Oracle is a company where YOU can make a difference. What is OD? Oracle Direct is a state-of-the-art, multi-channel EMEA sales operation bringing to life the benefits of Oracle’s complete technology stack. It offers you the unique opportunity to work with the most talented and like-minded sales professionals in the industry.  You will have access to world class training and structured career development programmes allowing you to accelerate your Solution Sales career across a multitude of product lines and a choice of attractive locations. What positions are OD Hiring?   Oracle is on a journey to be the #1 SaaS vendor in EMEA.  Due to recent expansion and acquisitions within our Cloud Business, we are now growing our EMEA Cloud Applications Sales Group in Dublin. We have many exciting NEW opportunities across our CRM and HCM SaaS Sales teams. As a SaaS Sales Account Manager, you will proactively manage an assigned territory / vertical with responsibility for the full sales cycle. This role requires strong business development, solution selling, account management and closing skills. WHY ORACLE? Oracle is a robust organization that has proven to maintain growth and innovation at all levels with a constant evolving attitude. The main ingredient of Oracles success is the 105.000 talented employees who constantly amaze each other in building a better and more innovative organization. Oracle is a company where YOU can make a difference. What is OD? Oracle Direct is a state-of-the-art, multi-channel EMEA sales operation bringing to life the benefits of Oracle’s complete technology stack. It offers you the unique opportunity to work with the most talented and like-minded sales professionals in the industry.  You will have access to world class training and structured career development programmes allowing you to accelerate your Solution Sales career across a multitude of product lines and a choice of attractive locations. What positions are OD Hiring? Oracle is on a journey to be the #1 SaaS vendor in EMEA.  Due to recent expansion and acquisitions within our Cloud Business, we are now growing our EMEA Cloud Applications Sales Group in Dublin. We have many exciting NEW opportunities across our CRM and HCM SaaS Sales teams. As a SaaS Sales Account Manager, you will proactively manage an assigned territory / vertical with responsibility for the full sales cycle. This role requires strong business development, solution selling, account management and closing skills. What is the Business Development Group (BDG) The Business Development Group is the key entry point in Oracle for the future Sales and Management talent of the organisation. We are the Demand Generation engine for Oracle in EMEA. We provide revenue generating, quality sales pipeline to our Inside and Field Sales professionals as well as to our Channel Partners. Our current focus is to provide an agile and flexible service offering to our customers and stakeholders to meet ever changing business needs, whilst constantly striving to improve the customer experience, quality of our pipeline, market coverage and penetration. As a SaaS Business Development Consultant (BDC) you will be the first touch point with new customers. Your goal is to proactively identify and qualify business opportunities leading to revenue for Oracle. You will work closely with your Inside Sales colleagues who will progress your qualified pipeline and opportunities. Work for us Work for the only multi-pillar SaaS vendor in the market Be part of a FUN, fast paced and truly International sales team  Develop you solution sales EXPERTISE Drive your CAREER development within a structured and supportive environment The Profile You have a passion for selling cutting-edge technology You thrive in a fast paced and dynamic work environment where being the best is paramount Your priority is always the customer You live for a challenge and you love to win Join us on our Journey to be #1 in SaaS and be part of our Cloud Success Story! You will find more information about open roles here

    Read the article

  • What is the best practice, point of view of well experienced developers

    - by Damien MIRAS
    My manager pushes me to use his self defined best practices. All of these practices are based on is own assumptions. I disagree with them and I would like to have some feedback of well experienced people about these practices. I would prefer answers from people involved in the maintenance of huge products and people whom have maintained the product for years. Developers with 15+ years of experience are preferred because my manager has that much experience himself. I have 7 years of experience. Here are the practices he wants me to use: never extends classes, use composition and interface instead because extending classes are unmaintainable and difficult to debug. What I think about that Extend when needed, respect "Liskov's Substitution Principle" and you'll never be stuck with a problem, but prefer composition and decoration. I don't know any serious project which has banned inheriting, sometimes it's impossible to not use that, i.e. in a UI framework. Design patterns are just unusable. In PHP, for simple use cases (for example a user needs a web interface to view a database table), his "best practice" is: copy some random php code wich we own, paste and modify it, put html and php code in same file, never use classes in PHP, it doesn't work well for small jobs, and in fact it doesn't work well at all, there is no good tool to work with. Copy & paste PHP code is good practice for maintenance because scripts are independent, if you have a bug somewhere you can fix it without side effects. What I think about that: NEVER EVER COPY code or do it because you have five minutes to deliver something, you will do some refactoring after that. Copy & paste code is a beginners error, if you have errors you'll have the error everywhere any time you have pasted it's a nightmare to maintain. If you repsect the "Open Close Principle" you'll rarely get edge effects, use unit test if you are afraid of that. For small jobs in PHP use at least something you get or write the HTML separately from the PHP code and reuse it any time you need it. Classes in PHP are mature, not as mature as other languages like python or java, but they are usable. There is tools to work with classes in PHP like Zend Studio that work very well. The use of classes or not depends not on the language you use but the programming paradigm you have choosen. I'm a OOP developer, I use PHP5, why do I have to shoot myself in the foot? When you find a simple bug in the code, and you can fix it simply, if you are not working on the code where you have found it, never fix it, even if it takes 5 seconds. He says to me his "best practices" are driven by the fact that he has a lot of experience in maintaining software in production (14 years) and he now knows what works and what doesn't work, what the community says is a fad, and the people advocating such principles as never copy & paste code, are not evolved in maintaining applications. What I think about that: If you find a bug fix it if you can do it quickly inform the people who've touched that code before, check if you have not introduced a new bug, ideally add a unit test for it. I currently work on a web commerce project, which serves 15k unique users per day. The code base has to be maintained and has been maintained this way since 2005. Ideally you include a short description of your position and experience in terms of years effectively maintaining an application which has been in production for real.

    Read the article

  • A developer&rsquo;s WBS &ndash; 3 factors of 5

    - by johndoucette
    As a development manager, I have requested work breakdown structures (WBS) many times from the dev leads. Everyone has their own approach and why it takes sometimes days to get this simple list is often frustrating. Here is a simple way to get that elusive WBS done in 30 minutes and have 125 items in your list – well, 126. The WBS is made up of parent-child entities representing the overall outcome of the project. At the bottom of the hierarchical list should be the task item that a developer would perform in support of the branch in the list or WBS. Because I work with different dev leads on every project, I always ask the “what time value would you like to see at the lowest task in order to assign it to a developer and ensure it gets done within the timeframe”. I am particular to a task being 8 hours. Some like 8 to 24 hours. Stay away from tasks defaulting to 1 week. The task becomes way to vague and hard to manage completeness, especially on short budgets. As a developer, your focus is identifying the tasks you to accomplish in order to deliver the product. As a project manager, you will take the developer's WBS and add all the “other stuff” like quality testing, meetings, documentation, transition to maintenance, etc… Start your exercise with the name of the product you are delivering as a result of the project. You should be able to represent what you are building and deploying with one to three words. Example; XYZ Public Website Middleware BizTalk Application The reason you start with that single identifier is to always see the list as the product. It helps during each of the next three passes. Now, choose 5 tasks which in their entirety represent the product you will be delivering and add them to list under the product name you created earlier; Public Website     Security     Sites     Infrastructure     Publishing     Creative Continue this concept of seeing the list as the complete picture and decompose it one more level. You should have 25 items. Public Website     Security         Authentication         Login Control         Administration         DRM         Workflow     Sites         Masterpages         Page Layouts         Web Parts (RIA, Multimedia)         Content Types         Structures     Infrastructure         ...     Publishing         ...     Creative         ... And one more time for a total of 125 items. The top item makes the list 126. Public Website     Security         Authentication             Install (AD/ADAM/LDAP/SQL)             Configuration             Management             Web App Configuration             Implement Provider         Login Control             Login Form             Login/Logoff             pw change             pw recover/forgot             email verification         Administration             ...         DRM             ...         Workflow             ...     Sites         Masterpages         Page Layouts         Web Parts (RIA, Multimedia)         Content Types         Structures     Infrastructure         ...     Publishing         ...     Creative         ... The next step is to make sure the task at the bottom of every branch represents the “time value” you planned for the project. You can add more to the WBS and of course if you can’t find 5 items, 4 is fine. If a task can be done in a fraction of the time value you determined for the project, try to roll it up into a larger task. In the task actions (later when the iteration is being planned), decompose the details back to the simple tasks. Now, go estimate!

    Read the article

  • UPOS RFIDScanner data format

    - by Robert Snyder
    A lot of work that I do currently is based in the OPOS/UPOS world. My company has a device that can read 13.56Mhz tags (RFID), Smart Cards, and Mag Stripe cards. Up until somewhat recently I have only been working with RFID for a very specific scenario. That was to read UltraLight C and Desfire cards. These cards were all setup very specifically so that I could take the data read from those cards and force it into a MSR track2 format. The past couple of weeks, however, I have been working on reading RFID credit cards (since I have a Visa card I've been using mine), and Smart Card credit cards. (The visa card I have has both) In learning how to communicate with SmartCard and reading ISO7816 and EMVCO documents I became a little more familiar with how info is stored. But now I have a question regarding UPOS. The RFID data on my Visa is stored (and read) very similar to how the data is stored and read from the Smart Card on my Visa. Cool. Well in the UPOS spec for SmartCardRW the ReadData method returns a byte array. That's cool, I can just return all that data and then parse it as my heart desires. The RFID though has a LinkedList of Tags. Well this makes sense in terms of my Visa card (reminds me of a question I have in regards to SmartCard, but that is for another question) but what about ULC and Desfire, or for that matter any Mifare card. Pages, Files, Purses don't exactly fit the Tag profile. For instance lets just say I read pages 4-12 on my ULC card. Each page I read is 4 bytes long. Does this mean I have 9 tags in my LinkedList? Is my Tag id the page number? Or then how does that translate to Desfire? I open application 123456 and read file 1 and file 2, Do I have 2 tags? and if so what is my tag id? At least with my Visa I think that I have to use the Tag id (ex 5F24 for my expiration date) and value of {0x15, 0x10, 0x31} Part of me says yes..that makes sense. Another part of me says, "well if that is the case then why doesn't SmartCardRW have Tags?" So that is my question. How do I format my data from those different types of media? or is that the job of my Control Object (the application)? Is so how does it know? The only protocols I have are: // Summary: // Enumerates the available predefined RFID tag protocols the device supports. [Flags] public enum RFIDProtocols { EpcClass0 = 1, RFIDSdt0Plus = 2, EpcClass1 = 4, EpcClass1Gen2 = 8, EpcClass2 = 16, Iso14443A = 4096, Iso14443B = 8192, Iso15693 = 12288, Iso180006B = 16384, Other = 16777216, All = 1073741824, } If I use that well all of my cards that I have are all Iso14443A. I use the ATQA and the SAK to know what type of card I really have. There is no RFID property that lets me specify that. So I'm lost.

    Read the article

  • Session Sharing with another User on *NIX and Windows

    - by Giri Mandalika
    Oracle Solaris Since Solaris is not widely known for its graphical interface, let's just focus on sharing a terminal session in read-only mode with another user on the same system. Here is an example. eg., % finger Login Name TTY Idle When Where root Super-User pts/1 Sat 16:57 dhcp-amer-vpn-rmdc-a sunperf ??? pts/2 4 Sat 16:41 pitcher.sfbay.sun.com In this example, two users root and sunperf are connected to the same system from two different terminals pts/1 and pts/2 respectively. If the root user wants to show something to sunperf user -- what s/he is doing in her/his terminal, for example, it can be accomplished with the following command. script -a /dev/null | tee -a <target_terminal eg., # script -a /dev/null | tee -a /dev/pts/2 Script started, file is /dev/null # # uptime 5:04pm up 1 day(s), 2:56, 2 users, load average: 0.81, 0.81, 0.81 # # isainfo -v 64-bit sparcv9 applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc 32-bit sparc applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc v8plus div32 mul32 # # exit Script done, file is /dev/null After the script .. | tee .. command, sunperf user should be able to see the root user's stdin and stdout contents in her/his own terminal until the script session exits in root user's terminal. Since this kind of sharing is based on capturing and redirecting the contents to the target terminal, the users on the receiving end won't be able to see whatever is being edited on initiators' terminal [using editors such as vi]. Also it is not possible to share the session with any connected user on the system unless the initiator has the necessary permissions and privileges. The script utility records everything printed in a terminal session, while the tee utility replicates the contents of the screen capture on to the standard output of the target terimal. The tee utility does not buffer the output - so, the screen capture from the initiators' terminal appears almost right away in the target terminal. Though I never tested, this technique may work on all *NIX and Linux flavors with little or no changes. Also there might be other ways to accomplish this. [Thanks to Sujeet for sharing this tip] Microsoft Windows Most of the Windows users may rely on VNC services to share a desktop session. Another way to share the desktop session is to use the Remote Desktop Connection (RDC) client. Here are the steps. Connect to the target Windows system using Remote Desktop Connection client Launch Windows Task Manager Navigate to the "Users" tab Find the user session that you want to connect to and have full control over as the other user who is currently holding that session Select the user name in Windows Task Manager, right click and choose the option "Remote Control" A window pops up on the other user's session with the message "<USER is requesting to control your session remotely. Do you accept the request?" Once the other user says "Yes", you will be granted access to that session. Since then both users should be able to see the same screen and even control the session from their respective workstations.

    Read the article

  • My collection of favourite TFS utilities

    - by Aaron Kowall
    So, you’re in charge of your company or team’s Team Foundation Server.  Wish it was easier to manage, administer, extend?  Well, here are a few utilities that I highly recommend looking at. I’ve recently had need to rebuild my laptop and upgrade my local TFS environment to TFS 2012 Update 1.  This gave me cause to enumerate some of the utilities I like to have on hand. One of the reasons I love to use TFS on projects is that it’s basically a complete ALM toolkit.  Everything from Task Management, Version Control, Build Management, Test Management, Metrics and Reporting are all there ‘in the box’.  However, no matter how complete a product set it, there are always ways to make it better.  Here are a list of utilities and libraries that are pretty generally useful.  this is not intended to be an exhaustive list of TFS extensions but rather a set that I recommend you look at.  There are many more out there that may be applicable in one scenario or another.  This set of tools should work with TFS 2012 or 2010 if you grab the right version. Most of these tools (and more) are available from the Visual Studio Gallery or CodePlex. General TFS Power Tools – This is ‘the’ collection of utilities and extensions delivered by the Product Group.  Highly recommended from here are the Best Practice Analyzer for ensuring your TFS implementation is healthy and the Team Foundation Server Backups to ensure your TFS databases are backed up correctly. TFS Administrators Toolkit – helps make updates to work item types and reports across many team projects.  Also provides visibility of disk usage by finding large files in version control or test attachments to assist in managing storage utilization. Version Control Git-TF - a set of cross-platform, command line tools that facilitate sharing of changes between TFS and Git. These tools allow a developer to use a local Git repository, and configure it to share changes with a TFS server.  Great for all Git lovers who must integrate into a TFS repository. Testing TFS 2012 Tester Power Tool – A utility for bulk copying test cases which assists in an approach for managing test cases across multiple releases.  A little plug that this utility was written and maintained by Anna Russo of Imaginet where I also work. Test Scribe - A documentation power tool designed to construct documents directly from the TFS for test plan and test run artifacts for the purpose of discussion, reporting etc. Reporting Community TFS Report Extensions - a single repository of SQL Server Reporting Services report for Team Foundation 2010 (and above).  Check out the Test Plan Status report by Imaginet’s Steve St. Jean.  Very valuable for your test managers. Builds TFS Build Manager – A great utility if you are build manager over a complex build environment with many TFS build definitions. Community TFS Build Extensions – contains many custom build activities.  Current release binaries are for TFS 2010 but many of the activities can be recompiled for use with TFS 2012. While compiling this list, I was surprised by the number of TFS utilities and extensions I no longer use/need in TFS 2012 because of the great work by the TFS team addressing many gaps since the 2010 release. Are there any utilities you depend on that I’ve missed?  I’d love to hear about them in the comments!

    Read the article

  • Personal Financial Management – The need for resuscitation

    - by Salil Ravindran
    Until a year or so ago, PFM (Personal Financial Management) was the blue eyed boy of every channel banking head. In an age when bank account portability is still fiction, PFM was expected to incentivise customers to switch banks. It still is, in some emerging economies, but if the state of PFM in matured markets is anything to go by, it is in a state of coma and badly requires resuscitation. Studies conducted around the year show an alarming decline and stagnation in PFM usage in mature markets. A Sept 2012 report by Aite Group – Strategies for PFM Success shows that 72% of users hadn’t used PFM and worse, 58% of them were not kicked about using it. Of the rest who had used it, only half did on a bank site. While there are multiple reasons for this lack of adoption, some are glaringly obvious. While pretty graphs and pie charts are important to provide a visual representation of my income and expense, it is simply not enough to encourage me to return. Static representation of data without any insightful analysis does not help me. Budgeting and Cash Flow is important but when I have an operative account, a couple of savings accounts, a mortgage loan and a couple of credit cards help me with what my affordability is in specific contexts rather than telling me I just busted my budget. Help me with relative importance of each budget category so that I know it is fine to go over budget on books for my daughter as against going over budget on eating out. Budget over runs and spend analysis are post facto and I am informed of my sins only when I return to online banking. That too, only if I decide to come to the PFM area. Fundamentally, PFM should be a part of my banking engagement rather than an analysis tool. It should be contextual so that I can make insight based decisions. So what can be done to resuscitate PFM? Amalgamation with banking activities – In most cases, PFM tools are integrated into online banking pages and they are like chapter 37 of a long story. PFM needs to be a way of banking rather than a tool. Available balances should shift to Spendable Balances. Budget and goal related insights should be integrated with transaction sessions to drive pre-event financial decisions. Personal Financial Guidance - Banks need to think ground level and see if their PFM offering is really helping customers achieve self actualisation. Banks need to recognise that most customers out there are non-proficient about making the best value of their money. Customers return when they know that they are being guided rather than being just informed on their finance. Integrating contextual financial offers and financial planning into PFM is one way ahead. Yet another way is to help customers tag unwanted spending thereby encouraging sound savings habits. Mobile PFM – Most banks have left all those numbers on online banking. With access mostly having moved to devices and the success of apps, moving PFM on to devices will give it a much needed shot in the arm. This is not only about presenting the same wine in a new bottle but also about leveraging the power of the device in pushing real time notifications to make pre-purchase decisions. The pursuit should be to analyse spend, budgets and financial goals real time and push them pre-event on to the device. So next time, I should know that I have over run my eating out budget before walking into that burger joint and not after. Increase participation and collaboration – Peer group experiences and comments are valued above those offered by the bank. Integrating social media into PFM engagement will let customers share and solicit their financial management experiences with their peer group. Peer comparisons help benchmark one’s savings and spending habits with those of the peer group and increases stickiness. While mature markets have gone through this learning in some way over the last one year, banks in maturing digital banking economies increasingly seem to be falling into this trap. Best practices lie in profiling and segmenting customers, being where they are and contextually guiding them to identify and achieve their financial goals. Banks could look at the likes of Simple and Movenbank to draw inpiration from.

    Read the article

< Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >