hottest articles - Page 389

Remotely Schedule and Stream Recorded TV in Windows 7 Media Center

- by DigitalGeekery

Have you ever been away from home and suddenly realized you forgot to record your favorite program? Now Windows 7 Media Center, users can schedule recordings remotely from their phones or mobile devices with Remote Potato. How it Works Remote Potato installs server software on the host computer running Windows 7 Media Center. Once the software is installed, we’ll need to do some port forwarding on the router and setup an optional dynamic DNS address. When setup is completed, we will access the application through a web based interface. Silverlight is required for Streaming recorded TV, but scheduling recordings can be done through an HTML interface. Installing Remote Potato Download and install Remote Potato on the Media Center PC. (See download link below) If you plan to stream any Recorded TV, you’ll also want to install the streaming pack located on the same page. It isn’t required to stream all shows, only shows that require the AC3 audio codec. Click Yes to allow Remote Potato to add rules to the Windows Firewall for remote access. You’ll likely need to accept a few UAC prompts. When notified that the rules were added, click OK. Remote Potato will then prompt you to allow administrator privileges to reserve a URL for it’s web server. Click Yes. Remote Potato server will start. Click on the configuration button at the right to to reveal the settings tabs. One the General tab, you’ll have the option to run Remote Potato on startup and minimized in the System Tray. If you’re running Media Center on a dedicated HTPC, you’ll probably want to enable both startup options. Forwarding Ports on Your Router You’ll need to forward a couple ports on your router. By default, these will be ports 9080 and 9081. In this example we’re using a Linksys WRT54GL router, however, the steps for port forwarding will vary from router to router. On the Linksys configuration page, click on the Applications & Gaming Tab, and then the Port Range Forward tab. Under Application, type in a name of your choosing. In both the Start and End boxes, type the port number 9080. Enter the local IP address of your Media Center computer in the IP address column. Click the check box under Enable. Repeat the process on the next line, but this time use port 9081. When finished, click the Save Settings button. Note: It’s highly recommended that you configure the home computer running Media Center & Remote Potato with a static IP address. Find your IP Address You’ll need to find the IP address assigned to your router from your ISP. There are many ways to do this but a quick and easy way is to visit a site like checkip.dyndns.org (link available below) The current external IP address of your router will be displayed in the browser. Dynamic DNS This is an optional step, but it’s highly recommended. Many routers, such as the Linksys WRT54GL we are using, support Dynamic DNS (DDNS). What Dynamic DNS allows you to do is affiliate your home router’s external IP address to a domain name. Every time your home router is assigned a a new IP address by your ISP, the domain name is updated to point to your new IP address. Remote Potato’s user interface is accessed over the Internet is by connecting to your router’s IP address followed by a colon and the port number. (Ex: XXX.XXX.XXX.XXX:9080) Instead of constantly having to look up and remember an IP address, you can use DDNS along with a 3rd party provider like DynDNS.com, to sign up for a free domain name and configure it to be updated each time your router is assigned a new IP address. Go to the DynDNS.com website (See link at the end of the article) and sign up for a free Domain name. You’ll need to register and confirm by email. Once you’ve signed in and selected your domain name click Activate Services. You’ll get a confirmation message that your domain name has been activated. On the Linksys WRT54GL click on the Setup tab an then DDNS. Select DynDNS.org, or TZO.com if you prefer to use their service, from the drop down list. With DynDNS, you’ll need to fill in your username and password you signed up with at the DynDNS website and the hostname you chose. Note: You can connect over your local network with the IP Address of the computer running Remote Potato followed by a colon and the port number. Ex: 192.168.1.2:9080 Logging in Remote Potato and Recording a Show Once you connect, you’ll see the start page. To view the TV listings, click on TV Guide. You’ll then see your guide listings. There are a few ways to navigate the listings. At the top left, you can click on any of the preset time buttons to jump to the listings at that time of the day. Click on the arrows to the right and left of the day and date at the top center to proceed to the previous or next day. Or, jump to a specific day with the date and date buttons at the top right. To setup a recording, click on a program. You can choose to record the individual show or the entire series by clicking on Record Show or Record Series. Remote Potato on Mobile Devices Perhaps the coolest feature of Remote Potato is the ability to schedule recording from your phone or mobile device. Note: For any devices or computers without Silverlight, you will be prompted to view the HTML page. Select Browse Listings. Select your program to record. In the Program Details, select Record Show to record the single episode or Record Series to record all instances of the series. You will then see a red dot on the program listing to indicate that the show is scheduled for recording. Streaming Recorded TV Click on Recorded TV from the home screen to access your previously recorded TV programs. Click on the selection you wish to stream. Click on Play. If you receive this error message, you’ll need to install the streaming pack for Remote Potato. This is found on the same download page as installation files. (See link below) The Begin from slider allows you to start playback from the start (by default) or a different time of the program by moving the slider. The Quality (bitrate) setting allows you to choose the quality of the playback. We found the video quality on the Normal setting to be pretty lousy, and Low was just pointless. High was the best overall viewing experience as it provided smooth quality video playback. We experienced significant stuttering during playback using the Ultra High setting. Click Start when you are ready to begin. When playback begins you’ll see a slider at the top right. Move the slider left or right to increase or decrease the size of the video. There’s also a button to switch to full screen. Media Center users who travel frequently or are always on the go will likely find Remote Potato to be a blessing. Since being released earlier this year, updates for Remote Potato have come fast and furious. The latest beta release includes support for streaming music and photos. If you like those nice network TV logos, check out our article on adding TV channel logos to Windows Media Center. Downloads and Links Download Remote Potato and Streaming Pack Find your IP address Sign Up for a Domain Name at DynDNS.com Similar Articles Productive Geek Tips Schedule Updates for Windows Media CenterUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Add a Sleep Timer to Windows 7 Media CenterStartup Customizations for Media Center in Windows 7Enable Media Streaming in Windows Home Server to Windows Media Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos

Read the article

How to Upgrade Your Netbook to Windows 7 Home Premium

- by Matthew Guay

Would you like more features and flash in Windows on your netbook? Here’s how you can easily upgrade your netbook to Windows 7 Home Premium the easy way. Most new netbooks today ship with Windows 7 Starter, which is the cheapest edition of Windows 7. It is fine for many computing tasks, and will run all your favorite programs great, but it lacks many customization, multimedia, and business features found in higher editions. Here we’ll show you how you can quickly upgrade your netbook to more full-featured edition of Windows 7 using Windows Anytime Upgrade. Also, if you want to upgrade your laptop or desktop to another edition of Windows 7, say Professional, you can follow these same steps to upgrade it, too. Please note: This is only for computers already running Windows 7. If your netbook is running XP or Vista, you will have to run a traditional upgrade to install Windows 7. Upgrade Advisor First, let’s make sure your netbook can support the extra features, such as Aero Glass, in Windows 7 Home Premium. Most modern netbooks that ship with Windows 7 Starter can run the advanced features in Windows 7 Home Premium, but let’s check just in case. Download the Windows 7 Upgrade Advisor (link below), and install as normal. Once it’s installed, run it and click Start Check. Make sure you’re connected to the internet before you run the check, or otherwise you may see this error message. If you see it, click Ok and then connect to the internet and start the check again. It will now scan all of your programs and hardware to make sure they’re compatible with Windows 7. Since you’re already running Windows 7 Starter, it will also tell you if your computer will support the features in other editions of Windows 7. After a few moments, the Upgrade Advisor will show you want it found. Here we see that our netbook, a Samsung N150, can be upgraded to Windows 7 Home Premium, Professional, or Ultimate. We also see that we had one issue, but this was because a driver we had installed was not recognized. Click “See all system requirements” to see what your netbook can do with the new edition. This shows you which of the requirements, including support for Windows Aero, your netbook meets. Here our netbook supports Aero, so we’re ready to go upgrade. For more, check out our article on how to make sure your computer can run Windows 7 with Upgrade Advisor. Upgrade with Anytime Upgrade Now, we’re ready to upgrade our netbook to Windows 7 Home Premium. Enter “Anytime Upgrade” in the Start menu search,and select Windows Anytime Upgrade. Windows Anytime Upgrade lets you upgrade using product key you already have or one you purchase during the upgrade process. And, it installs without any downloads or Windows disks, so it works great even for netbooks without DVD drives. Anytime Upgrades are cheaper than a standard upgrade, and for a limited time, select retailers in the US are offering Anytime Upgrades to Windows 7 Home Premium for only $49.99 if purchased with a new netbook. If you already have a netbook running Windows 7 Starter, you can either purchase an Anytime Upgrade package at a retail store or purchase a key online during the upgrade process for $79.95. Or, if you have a standard Windows 7 product key (full or upgrade), you can use it in Anytime upgrade. This is especially nice if you can purchase Windows 7 cheaper through your school, university, or office. Purchase an upgrade online To purchase an upgrade online, click “Go online to choose the edition of Windows 7 that’s best for you”. Here you can see a comparison of the features of each edition of Windows 7. Note that you can upgrade to either Home Premium, Professional, or Ultimate. We chose home Premium because it has most of the features that home users want, including Media Center and Aero Glass effects. Also note that the price of each upgrade is cheaper than the respective upgrade from Windows XP or Vista. Click buy under the edition you want. Enter your billing information, then your payment information. Once you confirm your purchase, you will directly be taken to the Upgrade screen. Make sure to save your receipt, as you will need the product key if you ever need to reinstall Windows on your computer. Upgrade with an existing product key If you purchased an Anytime Upgrade kit from a retailer, or already have a Full or Upgrade key for another edition of Windows 7, choose “Enter an upgrade key”. Enter your product key, and click Next. If you purchased an Anytime Upgrade kit, the product key will be located on the inside of the case on a yellow sticker. The key will be verified as a valid key, and Anytime Upgrade will automatically choose the correct edition of Windows 7 based on your product key. Click Next when this is finished. Continuing the Upgrade process Whether you entered a key or purchased a key online, the process is the same from here on. Click “I accept” to accept the license agreement. Now, you’re ready to install your upgrade. Make sure to save all open files and close any programs, and then click Upgrade. The upgrade only takes about 10 minutes in our experience but your mileage may vary. Any available Microsoft updates, including ones for Office, Security Essentials, and other products, will be installed before the upgrade takes place. After a couple minutes, your computer will automatically reboot and finish the installation. It will then reboot once more, and your computer will be ready to use! Welcome to your new edition of Windows 7! Here’s a before and after shot of our desktop. When you do an Anytime Upgrade, all of your programs, files, and settings will be just as they were before you upgraded. The only change we noticed was that our pinned taskbar icons were slightly rearranged to the default order of Internet Explorer, Explorer, and Media Player. Here’s a shot of our desktop before the upgrade. Notice that all of our pinned programs and desktop icons are still there, as well as our taskbar customization (we are using small icons on the taskbar instead of the default large icons). Before, with the Windows 7 Starter background and the Aero Basic theme: And after, with Aero Glass and the more colorful default Windows 7 background. All of the features of Windows 7 Home Premium are now ready to use. The Aero theme was activate by default, but you can now customize your netbook theme, background, and more with the Personalization pane. To open it, right-click on your desktop and select Personalize. You can also now use Windows Media Center, and can play-back DVD movies using an external drive. One of our favorite tools, the Snipping Tool, is also now available for easy screenshots and clips. Activating you new edition of Windows 7 You will still need to activate your new edition of Windows 7. To do this right away, open the start menu, right-click on Computer, and select Properties. Scroll to the bottom, and click “Activate Windows Now”. Make sure you’re connected to the internet, and then select “Activate Windows online now”. Activation may take a few minutes, depending on your internet connection speed. When it is done, the Activation wizard will let you know that Windows is activated and genuine. Your upgrade is all finished! Conclusion Windows Anytime Upgrade makes it easy, and somewhat cheaper, to upgrade to another edition of Windows 7. It’s useful for desktop and laptop owners who want to upgrade to Professional or Ultimate, but many more netbook owners will want to upgrade from Starter to Home Premium or another edition. Links Download the Windows 7 Upgrade Advisor Windows Team Blog: Anytime Upgrade Special with new PC purchase Similar Articles Productive Geek Tips How To Upgrade from Vista to Windows 7 Home Premium EditionAnother Blog You Should Subscribe ToMysticgeek Blog: Turn Vista Home Premium Into Ultimate (Part 3) – Shadow CopyUpgrade Ubuntu from Breezy to DapperHow to Upgrade the Windows 7 RC to RTM (Final Release) TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Get Your Delicious Bookmarks In Firefox’s Awesome Bar Manage Photos Across Different Social Sites With Dropico Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday

Read the article

Run Windows in Ubuntu with VMware Player

- by Matthew Guay

Are you an enthusiast who loves their Ubuntu Linux experience but still needs to use Windows programs? Here’s how you can get the full Windows experience on Ubuntu with the free VMware Player. Linux has become increasingly consumer friendly, but still, the wide majority of commercial software is only available for Windows and Macs. Dual-booting between Windows and Linux has been a popular option for years, but this is a frustrating solution since you have to reboot into the other operating system each time you want to run a specific application. With virtualization, you’ll never have to make this tradeoff. VMware Player makes it quick and easy to install any edition of Windows in a virtual machine. With VMware’s great integration tools, you can copy and paste between your Linux and Windows programs and even run native Windows applications side-by-side with Linux ones. Getting Started Download the latest version of VMware Player for Linux, and select either the 32-bit or 64-bit version, depending on your system. VMware Player is a free download, but requires registration. Sign in with your VMware account, or create a new one if you don’t already have one. VMware Player is fairly easy to install on Linux, but you will need to start out the installation from the terminal. First, enter the following to make sure the installer is marked as executable, substituting version/build_number for the version number on the end of the file you downloaded. chmod +x ./VMware-Player-version/build_number.bundle Then, enter the following to start the install, again substituting your version number: gksudo bash ./VMware-Player-version/build_number.bundle You may have to enter your administrator password to start the installation, and then the VMware Player graphical installer will open. Choose whether you want to check for product updates and submit usage data to VMware, and then proceed with the install as normal. VMware Player installed in only a few minutes in our tests, and was immediately ready to run, no reboot required. You can now launch it from your Ubuntu menu: click Applications \ System Tools \ VMware Player. You’ll need to accept the license agreement the first time you run it. Welcome to VMware Player! Now you can create new virtual machines and run pre-built ones on your Ubuntu desktop. Install Windows in VMware Player on Ubuntu Now that you’ve got VMware setup, it’s time to put it to work. Click the Create a New Virtual Machine as above to start making a Windows virtual machine. In the dialog that opens, select your installer disk or ISO image file that you want to install Windows from. In this example, we’re select a Windows 7 ISO. VMware will automatically detect the operating system on the disk or image. Click Next to continue. Enter your Windows product key, select the edition of Windows to install, and enter your name and password. You can leave the product key field blank and enter it later. VMware will ask if you want to continue without a product key, so just click Yes to continue. Now enter a name for your virtual machine and select where you want to save it. Note: This will take up at least 15Gb of space on your hard drive during the install, so make sure to save it on a drive with sufficient storage space. You can choose how large you want your virtual hard drive to be; the default is 40Gb, but you can choose a different size if you wish. The entire amount will not be used up on your hard drive initially, but the virtual drive will increase in size up to your maximum as you add files. Additionally, you can choose if you want the virtual disk stored as a single file or as multiple files. You will see the best performance by keeping the virtual disk as one file, but the virtual machine will be more portable if it is broken into smaller files, so choose the option that will work best for your needs. Finally, review your settings, and if everything looks good, click Finish to create the virtual machine. VMware will take over now, and install Windows without any further input using its Easy Install. This is one of VMware’s best features, and is the main reason we find it the easiest desktop virtualization solution to use. Installing VMware Tools VMware Player doesn’t include the VMware Tools by default; instead, it automatically downloads them for the operating system you’re installing. Once you’ve downloaded them, it will use those tools anytime you install that OS. If this is your first Windows virtual machine to install, you may be prompted to download and install them while Windows is installing. Click Download and Install so your Easy Install will finish successfully. VMware will then download and install the tools. You may need to enter your administrative password to complete the install. Other than this, you can leave your Windows install unattended; VMware will get everything installed and running on its own. Our test setup took about 30 minutes, and when it was done we were greeted with the Windows desktop ready to use, complete with drivers and the VMware tools. The only thing missing was the Aero glass feature. VMware Player is supposed to support the Aero glass effects in virtual machines, and although this works every time when we use VMware Player on Windows, we could not get it to work in Linux. Other than that, Windows is fully ready to use. You can copy and paste text, images, or files between Ubuntu and Windows, or simply drag-and-drop files between the two. Unity Mode Using Windows in a window is awkward, and makes your Windows programs feel out of place and hard to use. This is where Unity mode comes in. Click Virtual Machine in VMware’s menu, and select Enter Unity. Your Windows desktop will now disappear, and you’ll see a new Windows menu underneath your Ubuntu menu. This works the same as your Windows Start Menu, and you can open your Windows applications and files directly from it. By default, programs from Windows will have a colored border and a VMware badge in the corner. You can turn this off from the VMware settings pane. Click Virtual Machine in VMware’s menu and select Virtual Machine Settings. Select Unity under the Options tab, and uncheck the Show borders and Show badges boxes if you don’t want them. Unity makes your Windows programs feel at home in Ubuntu. Here we have Word 2010 and IE8 open beside the Ubuntu Help application. Notice that the Windows applications show up in the taskbar on the bottom just like the Linux programs. If you’re using the Compiz graphics effects in Ubuntu, your Windows programs will use them too, including the popular wobbly windows effect. You can switch back to running Windows inside VMware Player’s window by clicking the Exit Unity button in the VMware window. Now, whenever you want to run Windows applications in Linux, you can quickly launch it from VMware Player. Conclusion VMware Player is a great way to run Windows on your Linux computer. It makes it extremely easy to get Windows installed and running, lets you run your Windows programs seamlessly alongside your Linux ones. VMware products work great in our experience, and VMware Player on Linux was no exception. If you’re a Windows user and you’d like to run Ubuntu on Windows, check out our article on how to Run Ubuntu in Windows with VMware Player. Link Download VMware Player 3 (Registration required) Download Windows 7 Enterprise 90-day trial Similar Articles Productive Geek Tips Enable Copy and Paste from Ubuntu VMware GuestInstall VMware Tools on Ubuntu Edgy EftRestart the Ubuntu Gnome User Interface QuicklyHow to Add a Program to the Ubuntu Startup List (After Login)How To Run Ubuntu in Windows 7 with VMware Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor

Read the article

CodePlex Daily Summary for Thursday, February 25, 2010

CodePlex Daily Summary for Thursday, February 25, 2010New ProjectsAptusSoftware.Threading: AptusSoftware.Threading is a class library designed primarily to assist in the development of multi-threaded WinForm applications, although there i...AxiomGameDesigner: It is going to be a universal scene editor for Axiom 3D game engine. It is in pure C# and will be kept portable to MONO for compatibility with linu...Badger - Unity Productivity Extensions: A set of Microsoft Unity Extensions. Why Badger? Because I love badgers.Business & System Analysis Templates and Best Practices for Russian: http://saway.codeplex.com/Conectayas: Conectayas is an open source "Connect Four" alike game but transformable to "Tic-Tac-Toe" and to a lot of similar games that uses mouse. Written in...FastCode: .NET 3.5 Extensions set to increase coding speed.Hundiyas: Hundiyas is an open source "Battleship" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses mouse. This cross-platform and cro...Icelandic Online Banking: Icelandic Online Banking is project defining a web service interface for online banking.IE8 AddOns XML Creator: Application that helps on creating the xml files for IE8 Accelerators, Search Providers and the markup for Web Slices.iKnowledge: a asp.net mvc demoLearn ASP.NET MVC: Learn ASP.NET MVC is a project for the members of the Peer Learning group in Silicon Valley. It contains the SportsStore solution from the Pro ASP...Live at Education Meta Web-Service: Live at Education Meta Web-Service is intended to abstract from several technologies that are included in Live@edu set of services. This web-ser...Low level wave sound output for VB.NET: Low level sound output class for VB.NET using platform invocation services to call winmm.dllMailQ: MailQ makes it easier for developers to send mail messages from an application. The system sends mails based on a database queue system (store, se...Managed DXGI: Managed DXGI library is Fully managed wrapper writen on C# for DXGI 1.0 and 1.1 technology. It makes easier to support DXGI in managed application....Multivalue AutoComplete WinForms TextBox in C#: This project is a sample application that demonstrates how to create a multivalue WinForms textbox in C# using .NET Framework 3.5.Nifty CSharp Tools: Nifty CSharp Tools, will contain various tools and snippets. IRCBot, splashscreens, linq, world of warcraft log parsing, screenshot uploaders, twi...PHP MPQ: A port of StormLib to PHP for handling Blizzard MPQ files.RedDevils strategy - Project Hoshimi Programming Battle: Source Code of RedDevils strategy. Imagine Cup 2008 - Project Hoshimi Programming Battle.RNUNIT: rNunit is a distributed Nunit project. Many application these days are client-server application, distributed application and regular unit testing ...Samar Solution: Samar Solutions is a business system for office automation.Silverlight OOMRPG Game Engine: Silverlight OOMRPG Game EngineSimulator: GPSSimulatorSLARToolkit - Silverlight Augmented Reality Toolkit: SLARToolkit is a flexible Augmented Reality library for Silverlight with the aim to make real time Augmented Reality applications with Silverlight ...Spiral Architecture Driven Development (SADD) for Russian: Это русская версия сайта sadd.codeplex.comSQLSnapshotManager: Easily manage SQL Server database snapshots in a easy to use visual interface.Twilio with VB.NET MVC: Twilio with VB.NET MVC is a sample application for developing with Twilio's REST based telephony API. It includes an XML Schema of the TwiML respon...Ultra Speed Dial: UltraSpeedDial.com - Online Speed Dial Page.Visual HTML Editor justHTML: justHTML - is simle windows-application WYSIWYG editor that allow everyone - without any knowledge of HTML - to create and edit web-pages. It supp...WinMTR.NET: .NET Clone of the popular Windows clone of the popular Linux Matt's TracerouteWPF Dialogs: "WPF Dialogs" is a library for different Dialogs in WPF (e.g. FolderBrowseDialog, SaveFileDialog, OpenFileDialog etc.). These Dialogs are written i...WPFLogin: A small Login window in WPF and C#XNA PerformanceTimers: CPU Timers for Windows and Xbox360. Can track multiple threads, and presents output as a log on-screen.New ReleasesAptusSoftware.Threading: 2.0.0: First public release. This release is in production as part of several commercial applications and is stable. The source code download includes a...BizTalk Software Factory: BizTalk Software Factory v2.1: This is a service release for the BizTalk Software Factory for BizTalk Server 2009, containing so far: Fix for x64: the SN.EXE tool is now locate...Business & System Analysis Templates and Best Practices for Russian: R00 The Place reserver: Just to reserve the place Will be filled out soonChronos WPF: Chronos v1.0 Beta 2: Added a new SplashScreen Added a new Login View and implemented Log Off Added a new PasswordBoxHelper (http://www.codeproject.com/Articles/371...dotNetTips: dotNetTips.Utility 3.5 R2: This is a new release (version 3.5.0.3) compatible with .NET 3.5. Lots of new classes/features!! Requires SP1 if using the Entity Framework extensi...fleXdoc: template-based server-side document generator (docx): fleXdoc 1.0 beta 3: The third and final beta of fleXdoc. fleXdoc consists of a webservice and a (test)client for the service. Make sure you also download the testclien...FluentPS: FluentPS v1.0: - FluentPS is moved from ASMX to WCF interface of the Project Server Interface (PSI) - Impersonation changes to work in compliance with WCF interfa...FolderSize: FolderSize.Win32.1.0.4.0: FolderSize.Win32.1.0.3.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...iTuner - The iTunes Companion: iTuner 1.1.3707 Beta 3: As promised, the iTuner Automated Librarian is now available. This automatically cleans an entire album of dead tracks and duplicates as tracks ar...Live at Education Meta Web-Service: LAEMWS v 1.0 beta: Release Candidate for LAEMWS.Macaw Reusable Code Library: LanguageConfigurationSolution: This Solution helps developing a multi language publishing web siteManaged DXGI: Initial Release.: Base declaration of interfaces, most of them untested yet.Math.NET Numerics: 2010.2.24.667 Build: Latest alpha buildMiniTwitter: 1.08.1: MiniTwitter 1.08.1 更新内容変更インクリメンタル検索時には大文字小文字の区別をしないように変更クライアント名の表示を本家にあわせて from から via に変更修正公式 RT 時にステータスが上に表示されたり二重に表示されるバグを修正自分が自分へ返信...Multivalue AutoComplete WinForms TextBox in C#: 1.0 First public release: Multivalue autocomplete textbox control and host application in this release are released in a single Visual Studio 2008 projects. See my related b...NMock3: NMock3 - Beta3, .NET 3.5: This release has some exciting new features. Please start providing feedback on the tutorials. The first several are complete and the rest are no...nxAjax - an asp.net ajax library using jQuery: nxAjax v3 codeplex 7: nxAjax v3 codeplex 7 binary and test website. Bug Fixed: ajax:Form control Add: Drag and drop Rewritten: DragnDropManager DragPanel DropPan...Office Apps: 0.8.7: whats new? Document.Editor and Document.Viewer now supports FlowDocument (.xaml) files bug fix'sPDF Rider: PDF Rider 0.3: Application PrerequisitesMicrosoft Windows Operating Systems (XP (tested) - Vista - 7) Microsoft .NET Framework 3.5 runtime A PDF rendering sof...ShellLight: ShellLight 0.1.0.1 Src: Codeplex project released. This is only a preview of the product. Until the first final release there will be many improvements.Silverlight OOMRPG Game Engine: SilverlightGameTutorialSolution v1.01: Please visit my blog for Silverlight OOMROG Game Tutorial: http://www.cnblogs.com/Jax/archive/2010/02/24/1673053.html.Simple Savant: Simple Savant v0.4: Added support for full-text indexing (See Full-Text Indexing) Added support for attribute spanning and compression for property values larger tha...Spiral Architecture Driven Development (SADD) for Russian: R00: R00 to reserve site nameTeamReview - TFS Code Review: Release 1.1.3: Release Features New expanded product positioning for capturing any targeted coding work as a trackable, assignable, reportable Work Item for any r...Text Designer Outline Text Library: 10th minor release: Version 0.3.1 (10th minor release)Fixed the gradient brush being too big for the text, resulting in not much gradient shown in the text. Gradient...TFS Workflow Control: TeamExplorer and TSWA control 1.0 for TFS 2010 RC: This is a special version for TFS 2010 RC. Use the RC version of the power tools to modify the layout of your work items (http://visualstudiogaller...thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.7) - VS2010 RC Support: This update adds support for Visual Studio 2010 RC in addition to Visual Studio 2008. Please note that Visual Studio 2010 Beta 2 is NOT supported a...Tumblen3: tumblen3 Version 25Feb2010: ready for Twitter's xAuthUMD文本编辑器: UMDEditor文本编辑器V2.1.0: 2.1.0 (2010-02-24) 增加查找章节内指定文本内容的功能 2.0.4 (2010-02-06) 章节内容框增加右键菜单，包含编辑文本的基本操作 ------------------------------------------------------- 执行 reg.bat ...VCC: Latest build, v2.1.30224.0: Automatic drop of latest buildVisual HTML Editor justHTML: Latest binary: Latest buid here. Executable and mshtml.dll included in this archive. Ready to use ;)Visual HTML Editor justHTML: Source code for version 2.5: Visual studio 2008 project with full source code.VOB2MKV: vob2mkv-1.0.2: The release vob2mkv-1.0.2 is a feature update of the VOB2MKV project. It now includes a DirectShow source filter, MKVSOURCE. A source filter allo...WinMTR.NET: V 1.0: V 1.0WPF Dialogs: Version 0.1.0: Version 0.1.0 FolderBrowseDialog is implementet for more information look here Version 0.1.0 (german: Version 0.1.0 - Deutsch).WPF Dialogs: Version 0.1.1: Version 0.1.1 Features FolderBrowseDialog was extended / FolderBrowseDialog - Deutsch wurde erweitertXNA PerformanceTimers: XNA PerformanceTimers 0.1: Initial release.Zeta Resource Editor: Release 2010-02-24: Added HTTP proxy server support.Most Popular ProjectsASP.NET Ajax LibraryManaged Extensibility FrameworkWindows 7 USB/DVD Download ToolDotNetZip LibraryMDownloaderVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2MFCMAPIDroid ExplorerUseful Sharepoint Designer Custom Workflow ActivitiesOxiteMost Active ProjectsDinnerNow.netBlogEngine.NETRawrInfoServiceSLARToolkit - Silverlight Augmented Reality ToolkitNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSharpMap - Geospatial Application Framework for the CLRjQuery Library for SharePoint Web ServicesRapid Entity Framework. (ORM). CTP 2Common Context Adapters

Read the article

Complete Guide to Symbolic Links (symlinks) on Windows or Linux

- by Matthew Guay

Want to easily access folders and files from different folders without maintaining duplicate copies? Here’s how you can use Symbolic Links to link anything in Windows 7, Vista, XP, and Ubuntu. So What Are Symbolic Links Anyway? Symbolic links, otherwise known as symlinks, are basically advanced shortcuts. You can create symbolic links to individual files or folders, and then these will appear like they are stored in the folder with the symbolic link even though the symbolic link only points to their real location. There are two types of symbolic links: hard and soft. Soft symbolic links work essentially the same as a standard shortcut. When you open a soft link, you will be redirected to the folder where the files are stored. However, a hard link makes it appear as though the file or folder actually exists at the location of the symbolic link, and your applications won’t know any different. Thus, hard links are of the most interest in this article. Why should I use Symbolic Links? There are many things we use symbolic links for, so here’s some of the top uses we can think of: Sync any folder with Dropbox – say, sync your Pidgin Profile Across Computers Move the settings folder for any program from its original location Store your Music/Pictures/Videos on a second hard drive, but make them show up in your standard Music/Pictures/Videos folders so they’ll be detected my your media programs (Windows 7 Libraries can also be good for this) Keep important files accessible from multiple locations And more! If you want to move files to a different drive or folder and then symbolically link them, follow these steps: Close any programs that may be accessing that file or folder Move the file or folder to the new desired location Follow the correct instructions below for your operating system to create the symbolic link. Caution: Make sure to never create a symbolic link inside of a symbolic link. For instance, don’t create a symbolic link to a file that’s contained in a symbolic linked folder. This can create a loop, which can cause millions of problems you don’t want to deal with. Seriously. Create Symlinks in Any Edition of Windows in Explorer Creating symlinks is usually difficult, but thanks to the free Link Shell Extension, you can create symbolic links in all modern version of Windows pain-free. You need to download both Visual Studio 2005 redistributable, which contains the necessary prerequisites, and Link Shell Extension itself (links below). Download the correct version (32 bit or 64 bit) for your computer. Run and install the Visual Studio 2005 Redistributable installer first. Then install the Link Shell Extension on your computer. Your taskbar will temporally disappear during the install, but will quickly come back. Now you’re ready to start creating symbolic links. Browse to the folder or file you want to create a symbolic link from. Right-click the folder or file and select Pick Link Source. To create your symlink, right-click in the folder you wish to save the symbolic link, select “Drop as…”, and then choose the type of link you want. You can choose from several different options here; we chose the Hardlink Clone. This will create a hard link to the file or folder we selected. The Symbolic link option creates a soft link, while the smart copy will fully copy a folder containing symbolic links without breaking them. These options can be useful as well. Here’s our hard-linked folder on our desktop. Notice that the folder looks like its contents are stored in Desktop\Downloads, when they are actually stored in C:\Users\Matthew\Desktop\Downloads. Also, when links are created with the Link Shell Extension, they have a red arrow on them so you can still differentiate them. And, this works the same way in XP as well. Symlinks via Command Prompt Or, for geeks who prefer working via command line, here’s how you can create symlinks in Command Prompt in Windows 7/Vista and XP. In Windows 7/Vista In Windows Vista and 7, we’ll use the mklink command to create symbolic links. To use it, we have to open an administrator Command Prompt. Enter “command” in your start menu search, right-click on Command Prompt, and select “Run as administrator”. To create a symbolic link, we need to enter the following in command prompt: mklink /prefix link_path file/folder_path First, choose the correct prefix. Mklink can create several types of links, including the following: /D – creates a soft symbolic link, which is similar to a standard folder or file shortcut in Windows. This is the default option, and mklink will use it if you do not enter a prefix. /H – creates a hard link to a file /J – creates a hard link to a directory or folder So, once you’ve chosen the correct prefix, you need to enter the path you want for the symbolic link, and the path to the original file or folder. For example, if I wanted a folder in my Dropbox folder to appear like it was also stored in my desktop, I would enter the following: mklink /J C:\Users\Matthew\Desktop\Dropbox C:\Users\Matthew\Documents\Dropbox Note that the first path was to the symbolic folder I wanted to create, while the second path was to the real folder. Here, in this command prompt screenshot, you can see that I created a symbolic link of my Music folder to my desktop. And here’s how it looks in Explorer. Note that all of my music is “really” stored in C:\Users\Matthew\Music, but here it looks like it is stored in C:\Users\Matthew\Desktop\Music. If your path has any spaces in it, you need to place quotes around it. Note also that the link can have a different name than the file it links to. For example, here I’m going to create a symbolic link to a document on my desktop: mklink /H “C:\Users\Matthew\Desktop\ebook.pdf” “C:\Users\Matthew\Downloads\Before You Call Tech Support.pdf” Don’t forget the syntax: mklink /prefix link_path Target_file/folder_path In Windows XP Windows XP doesn’t include built-in command prompt support for symbolic links, but we can use the free Junction tool instead. Download Junction (link below), and unzip the folder. Now open Command Prompt (click Start, select All Programs, then Accessories, and select Command Prompt), and enter cd followed by the path of the folder where you saved Junction. Junction only creates hard symbolic links, since you can use shortcuts for soft ones. To create a hard symlink, we need to enter the following in command prompt: junction –s link_path file/folder_path As with mklink in Windows 7 or Vista, if your file/folder path has spaces in it make sure to put quotes around your paths. Also, as usual, your symlink can have a different name that the file/folder it points to. Here, we’re going to create a symbolic link to our My Music folder on the desktop. We entered: junction -s “C:\Documents and Settings\Administrator\Desktop\Music” “C:\Documents and Settings\Administrator\My Documents\My Music” And here’s the contents of our symlink. Note that the path looks like these files are stored in a Music folder directly on the Desktop, when they are actually stored in My Documents\My Music. Once again, this works with both folders and individual files. Please Note: Junction would work the same in Windows 7 or Vista, but since they include a built-in symbolic link tool we found it better to use it on those versions of Windows. Symlinks in Ubuntu Unix-based operating systems have supported symbolic links since their inception, so it is straightforward to create symbolic links in Linux distros such as Ubuntu. There’s no graphical way to create them like the Link Shell Extension for Windows, so we’ll just do it in Terminal. Open terminal (open the Applications menu, select Accessories, and then click Terminal), and enter the following: ln –s file/folder_path link_path Note that this is opposite of the Windows commands; you put the source for the link first, and then the path second. For example, let’s create a symbolic link of our Pictures folder in our Desktop. To do this, we entered: ln -s /home/maguay/Pictures /home/maguay/Desktop Once again, here is the contents of our symlink folder. The pictures look as if they’re stored directly in a Pictures folder on the Desktop, but they are actually stored in maguay\Pictures. Delete Symlinks Removing symbolic links is very simple – just delete the link! Most of the command line utilities offer a way to delete a symbolic link via command prompt, but you don’t need to go to the trouble. Conclusion Symbolic links can be very handy, and we use them constantly to help us stay organized and keep our hard drives from overflowing. Let us know how you use symbolic links on your computers! Download Link Shell Extension for Windows 7, Vista, and XP Download Junction for XP Similar Articles Productive Geek Tips Using Symlinks in Windows VistaHow To Figure Out Your PC’s Host Name From the Command PromptInstall IceWM on Ubuntu LinuxAdd Color Coding to Windows 7 Media Center Program GuideSync Your Pidgin Profile Across Multiple PCs with Dropbox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

Read the article

Mapping UrlEncoded POST Values in ASP.NET Web API

- by Rick Strahl

If there's one thing that's a bit unexpected in ASP.NET Web API, it's the limited support for mapping url encoded POST data values to simple parameters of ApiController methods. When I first looked at this I thought I was doing something wrong, because it seems mighty odd that you can bind query string values to parameters by name, but can't bind POST values to parameters in the same way. To demonstrate here's a simple example. If you have a Web API method like this:[HttpGet] public HttpResponseMessage Authenticate(string username, string password) { …} and then hit with a URL like this: http://localhost:88/samples/authenticate?Username=ricks&Password=sekrit it works just fine. The query string values are mapped to the username and password parameters of our API method. But if you now change the method to work with [HttpPost] instead like this:[HttpPost] public HttpResponseMessage Authenticate(string username, string password) { …} and hit it with a POST HTTP Request like this: POST http://localhost:88/samples/authenticate HTTP/1.1 Host: localhost:88 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Content-type: application/x-www-form-urlencoded Content-Length: 30 Username=ricks&Password=sekrit you'll find that while the request works, it doesn't actually receive the two string parameters. The username and password parameters are null and so the method is definitely going to fail. When I mentioned this over Twitter a few days ago I got a lot of responses back of why I'd want to do this in the first place - after all HTML Form submissions are the domain of MVC and not WebAPI which is a valid point. However, the more common use case is using POST Variables with AJAX calls. The following is quite common for passing simple values:$.post(url,{ Username: "Rick", Password: "sekrit" },function(result) {…}); but alas that doesn't work. How ASP.NET Web API handles Content Bodies Web API supports parsing content data in a variety of ways, but it does not deal with multiple posted content values. In effect you can only post a single content value to a Web API Action method. That one parameter can be very complex and you can bind it in a variety of ways, but ultimately you're tied to a single POST content value in your parameter definition. While it's possible to support multiple parameters on a POST/PUT operation, only one parameter can be mapped to the actual content - the rest have to be mapped to route values or the query string. Web API treats the whole request body as one big chunk of data that is sent to a Media Type Formatter that's responsible for de-serializing the content into whatever value the method requires. The restriction comes from async nature of Web API where the request data is read only once inside of the formatter that retrieves and deserializes it. Because it's read once, checking for content (like individual POST variables) first is not possible. However, Web API does provide a couple of ways to access the form POST data: Model Binding - object property mapping to bind POST values FormDataCollection - collection of POST keys/values ModelBinding POST Values - Binding POST data to Object Properties The recommended way to handle POST values in Web API is to use Model Binding, which maps individual urlencoded POST values to properties of a model object provided as the parameter. Model binding requires a single object as input to be bound to the POST data, with each POST key that matches a property name (including nested properties like Address.Street) being mapped and updated including automatic type conversion of simple types. This is a very nice feature - and a familiar one from MVC - that makes it very easy to have model objects mapped directly from inbound data. The obvious drawback with Model Binding is that you need a model for it to work: You have to provide a strongly typed object that can receive the data and this object has to map the inbound data. To rewrite the example above to use ModelBinding I have to create a class maps the properties that I need as parameters:public class LoginData { public string Username { get; set; } public string Password { get; set; } } and then accept the data like this in the API method:[HttpPost] public HttpResponseMessage Authenticate(LoginData login) { string username = login.Username; string password = login.Password; … } This works fine mapping the POST values to the properties of the login object. As a side benefit of this method definition, the method now also allows posting of JSON or XML to the same endpoint. If I change my request to send JSON like this: POST http://localhost:88/samples/authenticate HTTP/1.1 Host: localhost:88 Accept: application/jsonContent-type: application/json Content-Length: 40 {"Username":"ricks","Password":"sekrit"} it works as well and transparently, courtesy of the nice Content Negotiation features of Web API. There's nothing wrong with using Model binding and in fact it's a common practice to use (view) model object for inputs coming back from the client and mapping them into these models. But it can be kind of a hassle if you have AJAX applications with a ton of backend hits, especially if many methods are very atomic and focused and don't effectively require a model or view. Not always do you have to pass structured data, but sometimes there are just a couple of simple response values that need to be sent back. If all you need is to pass a couple operational parameters, creating a view model object just for parameter purposes seems like overkill. Maybe you can use the query string instead (if that makes sense), but if you can't then you can often end up with a plethora of 'message objects' that serve no further purpose than to make Model Binding work. Note that you can accept multiple parameters with ModelBinding so the following would still work:[HttpPost] public HttpResponseMessage Authenticate(LoginData login, string loginDomain) but only the object will be bound to POST data. As long as loginDomain comes from the querystring or route data this will work. Collecting POST values with FormDataCollection Another more dynamic approach to handle POST values is to collect POST data into a FormDataCollection. FormDataCollection is a very basic key/value collection (like FormCollection in MVC and Request.Form in ASP.NET in general) and then read the values out individually by querying each. [HttpPost] public HttpResponseMessage Authenticate(FormDataCollection form) { var username = form.Get("Username"); var password = form.Get("Password"); …} The downside to this approach is that it's not strongly typed, you have to handle type conversions on non-string parameters, and it gets a bit more complicated to test such as setup as you have to seed a FormDataCollection with data. On the other hand it's flexible and easy to use and especially with string parameters is easy to deal with. It's also dynamic, so if the client sends you a variety of combinations of values on which you make operating decisions, this is much easier to work with than a strongly typed object that would have to account for all possible values up front. The downside is that the code looks old school and isn't as self-documenting as a parameter list or object parameter would be. Nevertheless it's totally functionality and a viable choice for collecting POST values. What about [FromBody]? Web API also has a [FromBody] attribute that can be assigned to parameters. If you have multiple parameters on a Web API method signature you can use [FromBody] to specify which one will be parsed from the POST content. Unfortunately it's not terribly useful as it only returns content in raw format and requires a totally non-standard format ("=content") to specify your content. For more info in how FromBody works and several related issues to how POST data is mapped, you can check out Mike Stalls post: How WebAPI does Parameter Binding Not really sure where the Web API team thought [FromBody] would really be a good fit other than a down and dirty way to send a full string buffer. Extending Web API to make multiple POST Vars work? Don't think so Clearly there's no native support for multiple POST variables being mapped to parameters, which is a bit of a bummer. I know in my own work on one project my customer actually found this to be a real sticking point in their AJAX backend work, and we ended up not using Web API and using MVC JSON features instead. That's kind of sad because Web API is supposed to be the proper solution for AJAX backends. With all of ASP.NET Web API's extensibility you'd think there would be some way to build this functionality on our own, but after spending a bit of time digging and asking some of the experts from the team and Web API community I didn't hear anything that even suggests that this is possible. From what I could find I'd say it's not possible primarily because Web API's Routing engine does not account for the POST variable mapping. This means [HttpPost] methods with url encoded POST buffers are not mapped to the parameters of the endpoint, and so the routes would never even trigger a request that could be intercepted. Once the routing doesn't work there's not much that can be done. If somebody has an idea how this could be accomplished I would love to hear about it. Do we really need multi-value POST mapping? I think that that POST value mapping is a feature that one would expect of any API tool to have. If you look at common APIs out there like Flicker and Google Maps etc. they all work with POST data. POST data is very prominent much more so than JSON inputs and so supporting as many options that enable would seem to be crucial. All that aside, Web API does provide very nice features with Model Binding that allows you to capture many POST variables easily enough, and logistically this will let you build whatever you need with POST data of all shapes as long as you map objects. But having to have an object for every operation that receives a data input is going to take its toll in heavy AJAX applications, with a lot of types created that do nothing more than act as parameter containers. I also think that POST variable mapping is an expected behavior and Web APIs non-support will likely result in many, many questions like this one: How do I bind a simple POST value in ASP.NET WebAPI RC? with no clear answer to this question. I hope for V.next of WebAPI Microsoft will consider this a feature that's worth adding. Related Articles Passing multiple POST parameters to Web API Controller Methods Mike Stall's post: How Web API does Parameter Binding Where does ASP.NET Web API Fit?© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Turn Photos and Home Videos into Movies with Windows Live Movie Maker

- by DigitalGeekery

Are you looking for an easy way to take your digital photos and videos and turn them into a movie or slideshow? Today we’ll take a detailed look at how to do use Windows Live Movie Maker. Installation Windows Live Movie Maker comes bundled as part of the Windows Live Essentials suite (link below). However, you don’t have to install any of the programs you may not want. Take notice of the You’re almost done screen. Before clicking Continue, be sure to uncheck the boxes to set your search provider and homepage. Adding Pictures and Videos Open Windows Live Movie Maker. You can add videos or photos by simply dragging and dropping them onto the storyboard area. You can also click on the storyboard area or on the Add videos and photos button on the Home tab to browse for videos and photos. Windows Live Movie Maker supports most video, image, and audio file types. Select your files and add click Open to add them to Windows Live Movie Maker. By default WLMM doesn’t allow you to add files from network locations…so check out our article on how to add network support to Windows Live MovieMaker if the files you want to add are on a network drive. Layout All of your added clips will appear in the storyboard area on the right, while the currently selected clip will appear in the preview window on the left. You can adjust the size of the two areas by clicking and dragging the dividing line in the middle. Make the clips on the storyboard bigger or smaller by clicking on the thumbnail size icon. The slider at the lower right adjusts the zoom time scale. Previewing your Movie At any time, you can playback your movie and preview how it will look in the Preview window by clicking the space bar, or by pushing the play button under the preview window. You can also manually move the preview bar slider across the storyboard to view the clips as the video progresses. Adjusting Clips on the Storyboard You can click and drag clips on the storyboard to change the order in which the photos and videos appear. Adding Music Nothing brings a movie to life quite like music. Selecting Add music will add your music to the beginning of the movie. Select Add music at the current point to include it in the movie to the current location of your preview bar slider, then browse for your music clip. WLMM supports many common audio files such as WAV, MP3, M4A, WMA, AIFF, and ASF. The music clip will appear above the video / photos clips on the storyboard. You can change the location of music clips by clicking and dragging them to a different location on the storyboard. Add Titles, Captions, and Credits To add a Title screen to your movie, click the Title button on the Home tab. Type your title directly into the text box on the preview screen. The title will be placed at the location of the preview slider on the storyboard. However, you can change the location by clicking and dragging title to other areas of the storyboard. On the Format tab, there are a handful of text settings. You can change the font, color, size, alignment, and transparency. The Adjust group allows you to change the background color, edit the text, and set the length of time the Title will appear in the movie. The Effects group on the Format tab allows you to select an effect for your title screen. By hovering your cursor over each option, you will get a live preview of how each effect will appear in the preview window. Click to apply any of the effects. For captions, select where you want your caption to appear with the preview slider on the storyboard, then click the captions button on the Home tab. Just like the title, you type your caption directly into the text box on the preview screen, and you can make any adjustments by using the Font and Paragraph, Adjust, and Effects groups above. Credits are done the same as titles and captions, except they are automatically placed at the end of the movie. Transitions Go to the Animation tab on the ribbon to apply transitions. Select a clip from the storyboard and hover over one of the transition to see it in the preview window. Click on the transition to apply it to the clip. You can apply transitions separately to clips or hold down Ctrl button while clicking to select multiple clips to which to apply the same transition. Pan and zoom effects are also located on the Animations tab, but can be applied to photos only. Like transition, you can apply them individually to a clip or hold down Ctrl button while clicking to select multiple clips to which to apply the same pan and zoom effect. Once applied, you can adjust the duration of the transitions and pan and zoom effects. You can also click the dropdown for additional transitions or effects. Visual Effects Similar to Pan and Zoom and Transitions, you can apply a variety of Visual Effects to individual or multiple clips. Editing Video and Music Note: This does not actually edit the original video you imported into your Windows Live Movie Maker project, only how it appears in your WLMM project. There are some very basic editing tools located on the Home tab. The Rotate left and Rotate right button will adjust any clip that may be oriented incorrectly. The Fit to music button will automatically adjust the duration of the photos (if you have any in your project) to fit the length of the music in your movie. Audio mix allows you to change the volume level You can also do some slightly more advanced editing from the Edit tab. Select the video clip on the storyboard and click the Trim tool to edit or remove portions of a video clip. Next, click and drag the sliders in the preview windows to select the are you wish to keep. For example, the area outside the sliders is the area trimmed from the movie. The area inside is the section that is kept in the movie. You can also adjust the Start and End points manually on the ribbon. When you are finished, click Save trim. You can also split your video clips. Move the preview slider to the location in the video clip where you’d like to split it, and select Split. Your video will be split into separate sections. Now you can apply different effects or move them to different locations on the storyboard. Editing Music Clips Select the music clip on the storyboard and then the Options tab on the ribbon. You can adjust the music volume by moving the slider right and left. You can also choose to have your music clip fade in or out at the beginning and end of your movie. From the Fade in and Fade out dropdowns, select None, Slow, Medium, or Fast. To adjust the sound of your audio clips, click on the Edit tab, select the Video volume button, and adjust the slider. Move it all the way to the left to mute any background noise in your video clips. AutoMovie As you have seen, Windows Live Movie Maker allows you to add effects, transitions, titles, and more. If you don’t want to do any of that stuff yourself, AutoMovie will automatically add title, credits, cross fade transitions between items, pan and zoom effects to photos, and fit your project to the music. Just select the AutoMovie button on the Home tab. You can go from zero to movie in literally a couple minutes. Uploading to YouTube You can share your video on YouTube directly from Windows Live Movie Maker. Click on the YouTube icon in the Sharing group on the Home tab. You’ll be prompted for your YouTube username and password. Fill in the details about your movie and click Publish. The movie will be converted to WMV before being uploaded to YouTube. As soon as the YouTube conversion is complete, you’re new movie is live and ready to be viewed. Saving your Movie as a Video File Select the icon at the top left, then select Save movie. As you hover your mouse over each of the options, you will see the output display size, aspect ratio, and estimated file size per minute of video. All of these settings will output your movie as a WMV file. (Unfortunately, the only option is to save a movie as a WMV file.) The only difference is how they are encoded based on preset common settings. The Burn to DVD option also outputs a WMV file, but then opens Windows DVD Maker and walks you through the process of creating and burning a DVD. If you choose the Burn to DVD option, close this window when the WMV file conversion is complete and the Windows DVD Maker will prompt you to begin. When your movie is finished, it’s time to relax and enjoy. Conclusion Windows Live Movie Maker makes it easy for the average person to quickly churn out nice looking movies and slideshows from there own pictures and videos. However, long time users of previous editions (formerly called Windows Movie Maker) will likely be disappointed by some features missing in Windows Live Movie Maker that existed in earlier editions. Looking for details on burning your new project to DVD, check out our article on how to create and author DVDs with Windows DVD Maker. Download Windows Live Movie Maker Similar Articles Productive Geek Tips Family Fun: Share Photos with Photo Gallery and Windows Live SpacesCreate and Author DVDs in Windows 7Rotate a Video 90 degrees with VLC or Windows Live Movie MakerInstall Windows Live Essentials In Windows 7How to Make/Edit a movie with Windows Movie Maker in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010

Read the article

Silverlight Recruiting Application Part 6 - Adding an Interview Scheduling Module/View

Between the last post and this one I went ahead and carried the ideas for the Jobs module and view into the Applicants module and view- they're both doing more or less the same thing, except with different objects being at their core. Made for an easy cut-and-paste operation with a few items being switched from one to another. Now that we have the ability to add postings and applicants, wouldn't it be nice if we could schedule an interview? Of course it would! Scheduling Module I think you get the drift from previous posts that these project structures start looking somewhat similar. The interview scheduling module is no different than the rest- it gets a SchedulingModule.cs file at the root that inherits from IModule, and there is a single SchedulerView.xsml and SchedulerViewModel.cs setup for our V+VM. We have one unique concern as we enter into this- RadScheduler deals with AppointmentsSource, not ItemsSource, so there are some special considerations to take into account when planning this module. First, I need something which inherits from AppointmentBase. This is the core of the RadScheduler appointment, and if you are planning to do any form of custom appointment, you'll want it to inherit from this. Then you can add-on functionality as needed. Here is my addition to the mix, the InterviewAppointment: 01.public class InterviewAppointment : AppointmentBase 02.{ 03. private int _applicantID; 04. public int ApplicantID 05. { 06. get { return this._applicantID; } 07. set 08. { 09. if (_applicantID != value) 10. { 11. _applicantID = value; 12. OnPropertyChanged("ApplicantID"); 13. } 14. } 15. } 16. 17. private int _postingID; 18. public int PostingID 19. { 20. get { return _postingID; } 21. set 22. { 23. if (_postingID != value) 24. { 25. _postingID = value; 26. OnPropertyChanged("PostingID"); 27. } 28. } 29. } 30. 31. private string _body; 32. public string Body 33. { 34. get { return _body; } 35. set 36. { 37. if (_body != value) 38. { 39. _body = value; 40. OnPropertyChanged("Body"); 41. } 42. } 43. } 44. 45. private int _interviewID; 46. public int InterviewID 47. { 48. get { return _interviewID; } 49. set 50. { 51. if (_interviewID != value) 52. { 53. _interviewID = value; 54. OnPropertyChanged("InterviewID"); 55. } 56. } 57. } 58. 59. public override IAppointment Copy() 60. { 61. IAppointment appointment = new InterviewAppointment(); 62. appointment.CopyFrom(this); 63. return appointment; 64. } 65. 66. public override void CopyFrom(IAppointment other) 67. { 68. base.CopyFrom(other); 69. var appointment = other as InterviewAppointment; 70. if (appointment != null) 71. { 72. ApplicantID = appointment.ApplicantID; 73. PostingID = appointment.PostingID; 74. Body = appointment.Body; 75. InterviewID = appointment.InterviewID; 76. } 77. } 78.} Nothing too exciting going on here, we just make sure that our custom fields are persisted (specifically set in CopyFrom at the bottom) and notifications are fired- otherwise this ends up exactly like the standard appointment as far as interactions, etc. But if we've got custom appointment items... that also means we need to customize what our appointment dialog window will look like. Customizing the Edit Appointment Dialog This initially sounds a lot more intimidating than it really is. The first step here depends on what you're dealing with for theming, but for ease of everything I went ahead and extracted my templates in Blend for RadScheduler so I could modify it as I pleased. For the faint of heart, the RadScheduler template is a few thousand lines of goodness since there are some very complex things going on in that control. I've gone ahead and trimmed down the template parts I don't need as much as possible, so what is left is all that is relevant to the Edit Appointment Dialog. Here's the resulting Xaml, with line numbers, so I can explain further: 001.<UserControl.Resources> 002.  003. <helpers:DataContextProxy x:Key="DataContextProxy" /> 004. 005. <telerik:Windows7Theme x:Key="Theme" /> 006. <SolidColorBrush x:Key="DialogWindowBackground" 007. Color="White" /> 008. <SolidColorBrush x:Key="CategorySelectorBorderBrush" 009. Color="#FFB1B1B1" /> 010. <LinearGradientBrush x:Key="RadToolBar_InnerBackground" 011. EndPoint="0.5,1" 012. StartPoint="0.5,0"> 013. <GradientStop Color="#FFFDFEFF" 014. Offset="0" /> 015. <GradientStop Color="#FFDDE9F7" 016. Offset="1" /> 017. <GradientStop Color="#FFE6F0FA" 018. Offset="0.5" /> 019. <GradientStop Color="#FFDCE6F4" 020. Offset="0.5" /> 021. </LinearGradientBrush> 022. <Style x:Key="FormElementTextBlockStyle" 023. TargetType="TextBlock"> 024. <Setter Property="HorizontalAlignment" 025. Value="Right" /> 026. <Setter Property="VerticalAlignment" 027. Value="Top" /> 028. <Setter Property="Margin" 029. Value="15, 15, 0, 2" /> 030. </Style> 031. <Style x:Key="FormElementStyle" 032. TargetType="FrameworkElement"> 033. <Setter Property="Margin" 034. Value="10, 10, 0, 2" /> 035. </Style> 036. <SolidColorBrush x:Key="GenericShallowBorderBrush" 037. Color="#FF979994" /> 038. <telerik:BooleanToVisibilityConverter x:Key="BooleanToVisibilityConverter" /> 039. <telerikScheduler:ImportanceToBooleanConverter x:Key="ImportanceToBooleanConverter" /> 040. <telerikScheduler:NullToVisibilityConverter x:Key="NullToVisibilityConverter" /> 041. <telerikScheduler:InvertedNullToVisibilityConverter x:Key="InvertedNullToVisibilityConverter" /> 042. <scheduler:ResourcesSeparatorConverter x:Key="ResourcesSeparatorConverter" /> 043. <DataTemplate x:Key="IconDataEditTemplate"> 044. <Image Source="/Telerik.Windows.Controls.Scheduler;component/Themes/Office/Images/cal.png" 045. Margin="3,3,0,0" 046. Width="16" 047. Height="16" /> 048. </DataTemplate> 049. <DataTemplate x:Key="SingleSelectionTemplate"> 050. <Grid VerticalAlignment="Stretch" 051. HorizontalAlignment="Stretch"> 052. <Grid.RowDefinitions> 053. <RowDefinition Height="Auto" /> 054. </Grid.RowDefinitions> 055. <Grid.ColumnDefinitions> 056. <ColumnDefinition Width="Auto" 057. MinWidth="84" /> 058. <ColumnDefinition Width="Auto" 059. MinWidth="200" /> 060. </Grid.ColumnDefinitions> 061. <TextBlock x:Name="SelectionNameLabel" 062. Margin="0,13,4,2" 063. Text="{Binding ResourceType.DisplayName}" 064. Style="{StaticResource FormElementTextBlockStyle}" 065. Grid.Column="0" /> 066. <telerikInput:RadComboBox ItemsSource="{Binding ResourceItems}" 067. Width="185" 068. Margin="5,10,20,2" 069. HorizontalAlignment="Left" 070. Grid.Column="1" 071. ClearSelectionButtonVisibility="Visible" 072. ClearSelectionButtonContent="Clear All" 073. DisplayMemberPath="Resource.DisplayName" 074. telerik:StyleManager.Theme="{StaticResource Theme}" 075. SelectedItem="{Binding SelectedItem, Mode=TwoWay}" /> 076. </Grid> 077. </DataTemplate> 078. <DataTemplate x:Key="MultipleSelectionTemplate"> 079. <Grid VerticalAlignment="Stretch" 080. HorizontalAlignment="Stretch"> 081. <Grid.RowDefinitions> 082. <RowDefinition Height="Auto" /> 083. </Grid.RowDefinitions> 084. <Grid.ColumnDefinitions> 085. <ColumnDefinition Width="Auto" 086. MinWidth="84" /> 087. <ColumnDefinition Width="Auto" 088. MinWidth="200" /> 089. </Grid.ColumnDefinitions> 090. <TextBlock x:Name="SelectionNameLabel" 091. Grid.Column="0" 092. Text="{Binding ResourceType.DisplayName}" 093. Margin="0,13,4,2" 094. Style="{StaticResource FormElementTextBlockStyle}" /> 095. <telerikInput:RadComboBox Grid.Column="1" 096. Width="185" 097. HorizontalAlignment="Left" 098. Margin="5,10,20,2" 099. ItemsSource="{Binding ResourceItems}" 100. SelectedIndex="{Binding SelectedIndex, Mode=TwoWay}" 101. ClearSelectionButtonVisibility="Visible" 102. ClearSelectionButtonContent="Clear All" 103. telerik:StyleManager.Theme="{StaticResource Theme}"> 104. <telerikInput:RadComboBox.ItemTemplate> 105. <DataTemplate> 106. <Grid HorizontalAlignment="Stretch" 107. VerticalAlignment="Stretch"> 108. <CheckBox VerticalAlignment="Center" 109. HorizontalContentAlignment="Stretch" 110. VerticalContentAlignment="Center" 111. IsChecked="{Binding IsChecked, Mode=TwoWay}" 112. Content="{Binding Resource.DisplayName}"> 113. <CheckBox.ContentTemplate> 114. <DataTemplate> 115. <TextBlock HorizontalAlignment="Stretch" 116. VerticalAlignment="Stretch" 117. Text="{Binding Content, RelativeSource={RelativeSource TemplatedParent}}" /> 118. </DataTemplate> 119. </CheckBox.ContentTemplate> 120. </CheckBox> 121. </Grid> 122. </DataTemplate> 123. </telerikInput:RadComboBox.ItemTemplate> 124. </telerikInput:RadComboBox> 125. </Grid> 126. </DataTemplate> 127. <scheduler:ResourceTypeTemplateSelector x:Key="ItemTemplateSelector" 128. MultipleSelectionTemplate="{StaticResource MultipleSelectionTemplate}" 129. SingleSelectionTemplate="{StaticResource SingleSelectionTemplate}" /> 130.  131. 132. <ControlTemplate x:Key="EditAppointmentTemplate" 133. TargetType="telerikScheduler:AppointmentDialogWindow"> 134. <StackPanel Background="{TemplateBinding Background}" 135. UseLayoutRounding="True"> 136. <StackPanel Grid.Row="0" 137. Orientation="Horizontal" 138. Background="{StaticResource RadToolBar_InnerBackground}" 139. Grid.ColumnSpan="2" 140. Height="0"> 141.  142. <Border Margin="1,1,0,0" 143. Background="#50000000" 144. HorizontalAlignment="Left" 145. VerticalAlignment="Center" 146. Width="2" 147. Height="16"> 148. <Border Margin="0,0,1,1" 149. Background="#80FFFFFF" 150. HorizontalAlignment="Left" 151. Width="1" /> 152. </Border> 153. <Border Margin="1,1,0,0" 154. Background="#50000000" 155. HorizontalAlignment="Left" 156. VerticalAlignment="Center" 157. Width="2" 158. Height="16"> 159. <Border Margin="0,0,1,1" 160. Background="#80FFFFFF" 161. HorizontalAlignment="Left" 162. Width="1" /> 163. </Border> 164. <TextBlock telerik:LocalizationManager.ResourceKey="ShowAs" 165. VerticalAlignment="Center" 166. Margin="5,0,0,0" /> 167. <telerikInput:RadComboBox ItemsSource="{TemplateBinding TimeMarkers}" 168. Width="100" 169. Height="20" 170. VerticalAlignment="Center" 171. Margin="5,0,0,0" 172. ClearSelectionButtonVisibility="Visible" 173. ClearSelectionButtonContent="Clear" 174. SelectedItem="{Binding TimeMarker,RelativeSource={RelativeSource TemplatedParent},Mode=TwoWay}" 175. telerik:StyleManager.Theme="{StaticResource Theme}"> 176. <telerikInput:RadComboBox.ItemTemplate> 177. <DataTemplate> 178. <StackPanel Orientation="Horizontal"> 179. <Rectangle Fill="{Binding TimeMarkerBrush}" 180. Margin="2" 181. Width="12" 182. Height="12" /> 183. <TextBlock Text="{Binding TimeMarkerName}" 184. Margin="2" /> 185. </StackPanel> 186. </DataTemplate> 187. </telerikInput:RadComboBox.ItemTemplate> 188. </telerikInput:RadComboBox> 189. <telerik:RadToggleButton x:Name="High" 190. BorderThickness="0" 191. Background="{StaticResource RadToolBar_InnerBackground}" 192. DataContext="{TemplateBinding EditedAppointment}" 193. telerik:StyleManager.Theme="{StaticResource Theme}" 194. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=High}" 195. Margin="2,2,0,2" 196. Width="23" 197. Height="23" 198. HorizontalContentAlignment="Center" 199. ToolTipService.ToolTip="High importance" 200. CommandParameter="High" 201. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 202. <StackPanel HorizontalAlignment="Center"> 203. <Path Stretch="Fill" 204. Height="10" 205. HorizontalAlignment="Center" 206. VerticalAlignment="Top" 207. Width="5.451" 208. Data="M200.39647,58.840393 C200.39337,58.336426 201.14566,57.683922 202.56244,57.684292 C204.06589,57.684685 204.73764,58.357765 204.72783,58.992363 C205.04649,61.795574 203.04713,64.181099 202.47388,66.133446 C201.93753,64.154961 199.9471,61.560352 200.39647,58.840393 z"> 209. <Path.Fill> 210. <LinearGradientBrush EndPoint="1.059,0.375" 211. StartPoint="-0.457,0.519"> 212. <GradientStop Color="#FFFF0606" 213. Offset="0.609" /> 214. <GradientStop Color="#FFBF0303" 215. Offset="0.927" /> 216. </LinearGradientBrush> 217. </Path.Fill> 218. </Path> 219. <Ellipse Height="3" 220. HorizontalAlignment="Center" 221. Margin="0,-1,0,0" 222. VerticalAlignment="Top" 223. Width="3"> 224. <Ellipse.Fill> 225. <RadialGradientBrush> 226. <GradientStop Color="#FFFF0606" 227. Offset="0" /> 228. <GradientStop Color="#FFBF0303" 229. Offset="1" /> 230. </RadialGradientBrush> 231. </Ellipse.Fill> 232. </Ellipse> 233. </StackPanel> 234. </telerik:RadToggleButton> 235. <telerik:RadToggleButton x:Name="Low" 236. HorizontalContentAlignment="Center" 237. BorderThickness="0" 238. Background="{StaticResource RadToolBar_InnerBackground}" 239. DataContext="{TemplateBinding EditedAppointment}" 240. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=Low}" 241. Margin="0,2,0,2" 242. Width="23" 243. Height="23" 244. ToolTipService.ToolTip="Low importance" 245. CommandParameter="Low" 246. telerik:StyleManager.Theme="{StaticResource Theme}" 247. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 248. <Path Stretch="Fill" 249. Height="12" 250. HorizontalAlignment="Center" 251. VerticalAlignment="Top" 252. Width="9" 253. Data="M222.40353,60.139881 L226.65768,60.139843 L226.63687,67.240196 L229.15347,67.240196 L224.37816,71.394943 L219.65274,67.240196 L222.37572,67.219345 z" 254. Stroke="#FF0365A7"> 255. <Path.Fill> 256. <LinearGradientBrush EndPoint="1.059,0.375" 257. StartPoint="-0.457,0.519"> 258. <GradientStop Color="#FFBBE4FF" /> 259. <GradientStop Color="#FF024572" 260. Offset="0.836" /> 261. <GradientStop Color="#FF43ADF4" 262. Offset="0.466" /> 263. </LinearGradientBrush> 264. </Path.Fill> 265. </Path> 266. </telerik:RadToggleButton> 267. </StackPanel > 268. <Border DataContext="{TemplateBinding EditedAppointment}" 269. Background="{Binding Category.CategoryBrush}" 270. Visibility="{Binding Category,Converter={StaticResource NullToVisibilityConverter}}" 271. CornerRadius="3" 272. Height="20" 273. Margin="5,10,5,0"> 274. <TextBlock Text="{Binding Category.DisplayName}" 275. VerticalAlignment="Center" 276. Margin="5,0,0,0" /> 277. </Border> 278. <Grid VerticalAlignment="Stretch" 279. HorizontalAlignment="Stretch" 280. DataContext="{TemplateBinding EditedAppointment}" 281. Background="{TemplateBinding Background}"> 282. <Grid.RowDefinitions> 283. <RowDefinition Height="Auto" /> 284. <RowDefinition Height="Auto" /> 285. <RowDefinition Height="Auto" /> 286. <RowDefinition Height="Auto" /> 287. <RowDefinition Height="Auto" /> 288. <RowDefinition Height="Auto" /> 289. <RowDefinition Height="Auto" /> 290. <RowDefinition Height="Auto" /> 291. <RowDefinition Height="Auto" /> 292. <RowDefinition Height="Auto" /> 293. </Grid.RowDefinitions> 294. <Grid.ColumnDefinitions> 295. <ColumnDefinition Width="Auto" 296. MinWidth="100" /> 297. <ColumnDefinition Width="Auto" 298. MinWidth="200" /> 299. </Grid.ColumnDefinitions> 300.  301. <TextBlock x:Name="SubjectLabel" 302. Grid.Row="0" 303. Grid.Column="0" 304. Margin="0,15,0,2" 305. telerik:LocalizationManager.ResourceKey="Subject" 306. Style="{StaticResource FormElementTextBlockStyle}" /> 307. <TextBox x:Name="Subject" 308. Grid.Row="0" 309. Grid.Column="1" 310. MinHeight="22" 311. Padding="4 2" 312. Width="340" 313. HorizontalAlignment="Left" 314. Text="{Binding Subject, Mode=TwoWay}" 315. MaxLength="255" 316. telerik:StyleManager.Theme="{StaticResource Theme}" 317. Margin="10,12,20,2" /> 318.  319. <TextBlock x:Name="DescriptionLabel" 320. Grid.Row="1" 321. Grid.Column="0" 322. Margin="0,13,0,2" 323. telerik:LocalizationManager.ResourceKey="Body" 324. Style="{StaticResource FormElementTextBlockStyle}" /> 325. <TextBox x:Name="Body" 326. VerticalAlignment="top" 327. Grid.Row="1" 328. Grid.Column="1" 329. Height="Auto" 330. MaxHeight="82" 331. Width="340" 332. HorizontalAlignment="Left" 333. MinHeight="22" 334. Padding="4 2" 335. TextWrapping="Wrap" 336. telerik:StyleManager.Theme="{StaticResource Theme}" 337. Text="{Binding Body, Mode=TwoWay}" 338. AcceptsReturn="true" 339. Margin="10,10,20,2" 340. HorizontalScrollBarVisibility="Auto" 341. VerticalScrollBarVisibility="Auto" /> 342.  343. <TextBlock x:Name="StartDateLabel" 344. Grid.Row="2" 345. Grid.Column="0" 346. Margin="0,13,0,2" 347. telerik:LocalizationManager.ResourceKey="StartTime" 348. Style="{StaticResource FormElementTextBlockStyle}" /> 349. <telerikScheduler:DateTimePicker x:Name="StartDateTime" 350. Height="22" 351. Grid.Row="2" 352. Grid.Column="1" 353. HorizontalAlignment="Left" 354. Margin="10,10,20,2" 355. Style="{StaticResource FormElementStyle}" 356. SelectedDateTime="{Binding Start, Mode=TwoWay}" 357. telerikScheduler:StartEndDatePicker.EndPicker="{Binding ElementName=EndDateTime}" 358. IsTabStop="False" 359. IsEnabled="False" /> 360. <TextBlock x:Name="EndDateLabel" 361. Grid.Row="3" 362. Grid.Column="0" 363. Margin="0,13,0,2" 364. telerik:LocalizationManager.ResourceKey="EndTime" 365. Style="{StaticResource FormElementTextBlockStyle}" /> 366. <telerikScheduler:DateTimePicker x:Name="EndDateTime" 367. Height="22" 368. Grid.Row="3" 369. Grid.Column="1" 370. HorizontalAlignment="Left" 371. Margin="10,10,20,2" 372. Style="{StaticResource FormElementStyle}" 373. IsTabStop="False" 374. IsEnabled="False" 375. SelectedDateTime="{Binding End, Mode=TwoWay}" /> 376.  377. <CheckBox x:Name="AllDayEventCheckbox" 378. IsChecked="{Binding IsAllDayEvent, Mode=TwoWay}" 379. Grid.Row="4" 380. Grid.Column="1" 381. Margin="10,10,20,2" 382. HorizontalAlignment="Left" 383. telerik:StyleManager.Theme="{StaticResource Theme}" 384. telerik:LocalizationManager.ResourceKey="AllDayEvent"> 385. <telerik:CommandManager.InputBindings> 386. <telerik:InputBindingCollection> 387. <telerik:MouseBinding Command="telerikScheduler:RadSchedulerCommands.ChangeTimePickersVisibility" 388. Gesture="LeftClick" /> 389. </telerik:InputBindingCollection> 390. </telerik:CommandManager.InputBindings> 391. </CheckBox> 392. <Grid Grid.Row="5" 393. Grid.ColumnSpan="2"> 394. <Grid.ColumnDefinitions> 395. <ColumnDefinition Width="Auto" 396. MinWidth="100" /> 397. <ColumnDefinition Width="Auto" 398. MinWidth="200" /> 399. </Grid.ColumnDefinitions> 400. <Grid.RowDefinitions> 401. <RowDefinition Height="Auto" /> 402. <RowDefinition Height="Auto" /> 403. </Grid.RowDefinitions> 404. <TextBlock Text="Applicant" 405. Margin="0,13,0,2" 406. Style="{StaticResource FormElementTextBlockStyle}" /> 407. <telerikInput:RadComboBox IsEditable="False" 408. Grid.Column="1" 409. Height="24" 410. VerticalAlignment="Center" 411. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.ApplicantList}" 412. SelectedValue="{Binding ApplicantID, Mode=TwoWay}" 413. SelectedValuePath="ApplicantID" 414. DisplayMemberPath="FirstName" /> 415. 416. <TextBlock Text="Job" 417. Margin="0,13,0,2" 418. Grid.Row="1" 419. Style="{StaticResource FormElementTextBlockStyle}" /> 420. <telerikInput:RadComboBox IsEditable="False" 421. Grid.Column="1" 422. Grid.Row="1" 423. Height="24" 424. VerticalAlignment="Center" 425. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.JobsList}" 426. SelectedValue="{Binding PostingID, Mode=TwoWay}" 427. SelectedValuePath="PostingID" 428. DisplayMemberPath="JobTitle"/> 429. </Grid> 430.  431. <Grid x:Name="ResourcesLayout" 432. Grid.Row="7" 433. Grid.Column="0" 434. Grid.ColumnSpan="2" 435. MaxHeight="130" 436. Margin="20,5,20,0"> 437. <Border Margin="0" 438. BorderThickness="1" 439. BorderBrush="{StaticResource GenericShallowBorderBrush}" 440. Visibility="{Binding ElementName=ResourcesScrollViewer, Path=ComputedVerticalScrollBarVisibility}"></Border> 441. <ScrollViewer x:Name="ResourcesScrollViewer" 442. IsTabStop="false" 443. Grid.Row="6" 444. Grid.Column="0" 445. Grid.ColumnSpan="2" 446. Margin="1" 447. telerik:StyleManager.Theme="{StaticResource Theme}" 448. VerticalScrollBarVisibility="Auto"> 449. <scheduler:ResourcesItemsControl x:Name="PART_Resources" 450. HorizontalAlignment="Left" 451. Padding="0,2,0,5" 452. IsTabStop="false" 453. ItemsSource="{TemplateBinding ResourceTypeModels}" 454. ItemTemplateSelector="{StaticResource ItemTemplateSelector}" /> 455. </ScrollViewer> 456. </Grid> 457. <StackPanel x:Name="FooterControls" 458. Margin="5 10 10 10" 459. Grid.Row="8" 460. Grid.Column="1" 461. HorizontalAlignment="Left" 462. Orientation="Horizontal"> 463. <telerik:RadButton x:Name="OKButton" 464. Margin="5" 465. Padding="10 0" 466. MinWidth="80" 467. Command="telerikScheduler:RadSchedulerCommands.SaveAppointment" 468. telerik:StyleManager.Theme="{StaticResource Theme}" 469. telerikNavigation:RadWindow.ResponseButton="Accept" 470. telerik:LocalizationManager.ResourceKey="SaveAndCloseCommandText"> 471. </telerik:RadButton> 472. <telerik:RadButton x:Name="CancelButton" 473. Margin="5" 474. Padding="10 0" 475. MinWidth="80" 476. telerik:LocalizationManager.ResourceKey="Cancel" 477. telerik:StyleManager.Theme="{StaticResource Theme}" 478. telerikNavigation:RadWindow.ResponseButton="Cancel" 479. Command="telerik:WindowCommands.Close"> 480. </telerik:RadButton> 481. </StackPanel> 482. </Grid> 483. <vsm:VisualStateManager.VisualStateGroups> 484. <vsm:VisualStateGroup x:Name="RecurrenceRuleState"> 485. <vsm:VisualState x:Name="RecurrenceRuleIsNull"> 486. <Storyboard> 487. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 488. Storyboard.TargetProperty="IsEnabled" 489. Duration="0"> 490. <DiscreteObjectKeyFrame KeyTime="0" 491. Value="True" /> 492. </ObjectAnimationUsingKeyFrames> 493. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 494. Storyboard.TargetProperty="IsEnabled" 495. Duration="0"> 496. <DiscreteObjectKeyFrame KeyTime="0" 497. Value="True" /> 498. </ObjectAnimationUsingKeyFrames> 499. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 500. Storyboard.TargetProperty="IsEnabled" 501. Duration="0"> 502. <DiscreteObjectKeyFrame KeyTime="0" 503. Value="True" /> 504. </ObjectAnimationUsingKeyFrames> 505. </Storyboard> 506. </vsm:VisualState> 507. <vsm:VisualState x:Name="RecurrenceRuleIsNotNull"> 508. <Storyboard> 509. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 510. Storyboard.TargetProperty="IsEnabled" 511. Duration="0"> 512. <DiscreteObjectKeyFrame KeyTime="0" 513. Value="False" /> 514. </ObjectAnimationUsingKeyFrames> 515. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 516. Storyboard.TargetProperty="IsEnabled" 517. Duration="0"> 518. <DiscreteObjectKeyFrame KeyTime="0" 519. Value="False" /> 520. </ObjectAnimationUsingKeyFrames> 521. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 522. Storyboard.TargetProperty="IsEnabled" 523. Duration="0"> 524. <DiscreteObjectKeyFrame KeyTime="0" 525. Value="False" /> 526. </ObjectAnimationUsingKeyFrames> 527. </Storyboard> 528. </vsm:VisualState> 529. </vsm:VisualStateGroup> 530. </vsm:VisualStateManager.VisualStateGroups> 531. </StackPanel> 532. </ControlTemplate> 533. <DataTemplate x:Key="AppointmentDialogWindowHeaderDataTemplate"> 534. <StackPanel Orientation="Horizontal" 535. MaxWidth="400"> 536. <TextBlock telerik:LocalizationManager.ResourceKey="Event" 537. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource BooleanToVisibilityConverter}}" /> 538. <TextBlock telerik:LocalizationManager.ResourceKey="Appointment" 539. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource InvertedBooleanToVisibilityConverter}}" /> 540. <TextBlock Text=" - " /> 541. <TextBlock x:Name="SubjectTextBlock" 542. Visibility="{Binding Appointment.Subject, Converter={StaticResource NullToVisibilityConverter}}" 543. Text="{Binding Appointment.Subject}" /> 544. <TextBlock telerik:LocalizationManager.ResourceKey="Untitled" 545. Visibility="{Binding Appointment.Subject, Converter={StaticResource InvertedNullToVisibilityConverter}}" /> 546. </StackPanel> 547. </DataTemplate> 548. <Style x:Key="EditAppointmentStyle" 549. TargetType="telerikScheduler:AppointmentDialogWindow"> 550. <Setter Property="IconTemplate" 551. Value="{StaticResource IconDataEditTemplate}" /> 552. <Setter Property="HeaderTemplate" 553. Value="{StaticResource AppointmentDialogWindowHeaderDataTemplate}" /> 554. <Setter Property="Background" 555. Value="{StaticResource DialogWindowBackground}" /> 556. <Setter Property="Template" 557. Value="{StaticResource EditAppointmentTemplate}" /> 558. </Style> 559.</UserControl.Resources> The first line there is the DataContextProxy I mentioned previously- we use that again to work a bit of magic in this template. Where we start getting into the dialog in question is line 132, but line 407 is where things start getting interesting. The ItemsSource is pointing at a list that exists in my ViewModel (or code-behind, if it is used as a DataContext), the SelectedValue is the item I am actually binding from the applicant (note the TwoWay binding), and SelectedValuePath and DisplayMemberPath ensure the proper applicant is being displayed from the collection. You will also see similar starting on line 420 where I do the same for the Jobs we'll be displaying. Just to wrap-up the Xaml, here's the RadScheduler declaraction that ties this all together and will be the main focus of our view: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. AppointmentsSource="{Binding Interviews}" 09. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 10. command:AppointmentAddedEventClass.Command="{Binding AddAppointmentCommand}" 11. command:ApptCreatedEventClass.Command="{Binding ApptCreatingCommand}" 12. command:ApptEditedEventClass.Command="{Binding ApptEditedCommand}" 13. command:ApptDeletedEventClass.Command="{Binding ApptDeletedCommand}"> 14.</telerikScheduler:RadScheduler> Now, we get to the ViewModel and what it takes to get that rigged up. And for those of you who remember the jobs post, those command:s in the Xaml are pointing to attached behavior commands that reproduce the respective events. This becomes very handy when we're setting up the code-behind version. ;) ViewModel I've been liking this approach so far, so I'm going to put the entire ViewModel here and then go into the lines of interest. Of course, feel free to ask me questions about anything that isn't clear (by line number, ideally) so I can help out if I have missed anything important: 001.public class SchedulerViewModel : ViewModelBase 002.{ 003. private readonly IEventAggregator eventAggregator; 004. private readonly IRegionManager regionManager; 005. 006. public RecruitingContext context; 007. 008. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 009. public ObservableItemCollection<InterviewAppointment> Interviews 010. { 011. get { return _interviews; } 012. set 013. { 014. if (_interviews != value) 015. { 016. _interviews = value; 017. NotifyChanged("Interviews"); 018. } 019. } 020. } 021. 022. private QueryableCollectionView _jobsList; 023. public QueryableCollectionView JobsList 024. { 025. get { return this._jobsList; } 026. set 027. { 028. if (this._jobsList != value) 029. { 030. this._jobsList = value; 031. this.NotifyChanged("JobsList"); 032. } 033. } 034. } 035. 036. private QueryableCollectionView _applicantList; 037. public QueryableCollectionView ApplicantList 038. { 039. get { return _applicantList; } 040. set 041. { 042. if (_applicantList != value) 043. { 044. _applicantList = value; 045. NotifyChanged("ApplicantList"); 046. } 047. } 048. } 049. 050. public DelegateCommand<object> AddAppointmentCommand { get; set; } 051. public DelegateCommand<object> ApptCreatingCommand { get; set; } 052. public DelegateCommand<object> ApptEditedCommand { get; set; } 053. public DelegateCommand<object> ApptDeletedCommand { get; set; } 054. 055. public SchedulerViewModel(IEventAggregator eventAgg, IRegionManager regionmanager) 056. { 057. // set Unity items 058. this.eventAggregator = eventAgg; 059. this.regionManager = regionmanager; 060. 061. // load our context 062. context = new RecruitingContext(); 063. LoadOperation<Interview> loadOp = context.Load(context.GetInterviewsQuery()); 064. loadOp.Completed += new EventHandler(loadOp_Completed); 065. 066. this._jobsList = new QueryableCollectionView(context.JobPostings); 067. context.Load(context.GetJobPostingsQuery()); 068. 069. this._applicantList = new QueryableCollectionView(context.Applicants); 070. context.Load(context.GetApplicantsQuery()); 071. 072. AddAppointmentCommand = new DelegateCommand<object>(this.AddAppt); 073. ApptCreatingCommand = new DelegateCommand<object>(this.ApptCreating); 074. ApptEditedCommand = new DelegateCommand<object>(this.ApptEdited); 075. ApptDeletedCommand = new DelegateCommand<object>(this.ApptDeleted); 076. 077. } 078. 079. void loadOp_Completed(object sender, EventArgs e) 080. { 081. LoadOperation loadop = sender as LoadOperation; 082. 083. foreach (var ent in loadop.Entities) 084. { 085. _interviews.Add(EntityToAppointment(ent as Interview)); 086. } 087. } 088. 089. #region Appointment Adding 090. 091. public void AddAppt(object obj) 092. { 093. // now we have a new InterviewAppointment to add to our QCV :) 094. InterviewAppointment newInterview = obj as InterviewAppointment; 095. 096. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 097. this.context.SubmitChanges((s) => 098. { 099. ActionHistory myAction = new ActionHistory(); 100. myAction.InterviewID = newInterview.InterviewID; 101. myAction.PostingID = newInterview.PostingID; 102. myAction.ApplicantID = newInterview.ApplicantID; 103. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 104. myAction.TimeStamp = DateTime.Now; 105. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 106. } 107. , null); 108. } 109. 110. public void ApptCreating(object obj) 111. { 112. // handled in the behavior, just a placeholder to ensure it runs :) 113. } 114. 115. #endregion 116. 117. #region Appointment Editing 118. 119. public void ApptEdited(object obj) 120. { 121. Interview editedInterview = (from x in context.Interviews 122. where x.InterviewID == (obj as InterviewAppointment).InterviewID 123. select x).SingleOrDefault(); 124. 125. CopyAppointmentEdit(editedInterview, obj as InterviewAppointment); 126. 127. context.SubmitChanges((s) => { 128. ActionHistory myAction = new ActionHistory(); 129. myAction.InterviewID = editedInterview.InterviewID; 130. myAction.PostingID = editedInterview.PostingID; 131. myAction.ApplicantID = editedInterview.ApplicantID; 132. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 133. myAction.TimeStamp = DateTime.Now; 134. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); } 135. , null); 136. } 137. 138. #endregion 139. 140. #region Appointment Deleting 141. 142. public void ApptDeleted(object obj) 143. { 144. Interview deletedInterview = (from x in context.Interviews 145. where x.InterviewID == (obj as InterviewAppointment).InterviewID 146. select x).SingleOrDefault(); 147. 148. context.Interviews.Remove(deletedInterview); 149. context.SubmitChanges((s) => 150. { 151. ActionHistory myAction = new ActionHistory(); 152. myAction.InterviewID = deletedInterview.InterviewID; 153. myAction.PostingID = deletedInterview.PostingID; 154. myAction.ApplicantID = deletedInterview.ApplicantID; 155. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 156. myAction.TimeStamp = DateTime.Now; 157. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 158. } 159. , null); 160. } 161. 162. #endregion 163. 164. #region Appointment Helpers :) 165. 166. public Interview AppointmentToEntity(InterviewAppointment ia) 167. { 168. Interview newInterview = new Interview(); 169. newInterview.Subject = ia.Subject; 170. newInterview.Body = ia.Body; 171. newInterview.Start = ia.Start; 172. newInterview.End = ia.End; 173. newInterview.ApplicantID = ia.ApplicantID; 174. newInterview.PostingID = ia.PostingID; 175. newInterview.InterviewID = ia.InterviewID; 176. 177. return newInterview; 178. } 179. 180. public InterviewAppointment EntityToAppointment(Interview ia) 181. { 182. InterviewAppointment newInterview = new InterviewAppointment(); 183. newInterview.Subject = ia.Subject; 184. newInterview.Body = ia.Body; 185. newInterview.Start = ia.Start; 186. newInterview.End = ia.End; 187. newInterview.ApplicantID = ia.ApplicantID; 188. newInterview.PostingID = ia.PostingID; 189. newInterview.InterviewID = ia.InterviewID; 190. 191. return newInterview; 192. } 193. 194. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 195. { 196. entityInterview.Subject = appointmentInterview.Subject; 197. entityInterview.Body = appointmentInterview.Body; 198. entityInterview.Start = appointmentInterview.Start; 199. entityInterview.End = appointmentInterview.End; 200. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 201. entityInterview.PostingID = appointmentInterview.PostingID; 202. } 203. 204. #endregion 205.} One thing we're doing here which you won't see in any of the other ViewModels is creating a duplicate collection. I know this is something which will be fixed down the line for using RadScheduler, simplifying this process, but with WCF RIA changing as it does I wanted to ensure functionality would remain consistent as I continued development on this application. So, I do a little bit of duplication, but for the greater good. This all takes place starting on line 79, so for every entity that comes back we add it to the collection that is bound to RadScheduler. Otherwise, the DelegateCommands that you see correspond directly to the events they are named after. In each case, rather than sending over the full event arguments, I just send in the appointment in question (coming through as the object obj in all cases) so I can add (line 91), edit (line 119), and delete appointments (line 142) like normal. This just ensures they get updated back to my database. Also, the one bit of code you won't see is for the Appointment Creating (line 110) event- that is because in the command I've created I simply make the replacement I need to: 1.void element_AppointmentCreating(object sender, AppointmentCreatingEventArgs e) 2.{ 3. e.NewAppointment = new InterviewAppointment(); 4. base.ExecuteCommand(); 5.} And the ViewModel is none the wiser, the appointments just work as far as it is concerned since as they are created they become InterviewAppointments. End result? I've customized my EditAppointmentDialog as follows: And adding, editing, and deleting appointments works like a charm. I can even 'edit' by moving appointments around RadScheduler, so as they are dropped into a timeslot they perform their full edit routine and things get updated. And then, the Code-Behind Version Perhaps the thing I like the most about doing one then the other is I get to steal 90% or more of the code from the MVVM version. For example, the only real changes to the Code-Behind Xaml file exist in the control declaration, in which I use events instead of attached-behavior-event-commands: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 09. AppointmentAdded="xJobsScheduler_AppointmentAdded" 10. AppointmentCreating="xJobsScheduler_AppointmentCreating" 11. AppointmentEdited="xJobsScheduler_AppointmentEdited" 12. AppointmentDeleted="xJobsScheduler_AppointmentDeleted"> 13.</telerikScheduler:RadScheduler> Easy, right? Otherwise, all the same styling in UserControl.Resources was re-used, right down to the DataContextProxy that lets us bind to a collection from our viewmodel (in this case, our code-behind) to use within the DataTemplate. The code conversion gets even easier, as I could literally copy and paste almost everything from the ViewModel to my Code-Behind, just a matter of pasting the right section into the right event. Here's the code-behind as proof: 001.public partial class SchedulingView : UserControl, INotifyPropertyChanged 002.{ 003. public RecruitingContext context; 004. 005. private QueryableCollectionView _jobsList; 006. public QueryableCollectionView JobsList 007. { 008. get { return this._jobsList; } 009. set 010. { 011. if (this._jobsList != value) 012. { 013. this._jobsList = value; 014. this.NotifyChanged("JobsList"); 015. } 016. } 017. } 018. 019. private QueryableCollectionView _applicantList; 020. public QueryableCollectionView ApplicantList 021. { 022. get { return _applicantList; } 023. set 024. { 025. if (_applicantList != value) 026. { 027. _applicantList = value; 028. NotifyChanged("ApplicantList"); 029. } 030. } 031. } 032. 033. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 034. public ObservableItemCollection<InterviewAppointment> Interviews 035. { 036. get { return _interviews; } 037. set 038. { 039. if (_interviews != value) 040. { 041. _interviews = value; 042. NotifyChanged("Interviews"); 043. } 044. } 045. } 046. 047. public SchedulingView() 048. { 049. InitializeComponent(); 050. 051. this.DataContext = this; 052. 053. this.Loaded += new RoutedEventHandler(SchedulingView_Loaded); 054. } 055. 056. void SchedulingView_Loaded(object sender, RoutedEventArgs e) 057. { 058. this.xJobsScheduler.AppointmentsSource = Interviews; 059. 060. context = new RecruitingContext(); 061. 062. LoadOperation loadop = context.Load(context.GetInterviewsQuery()); 063. loadop.Completed += new EventHandler(loadop_Completed); 064. 065. this._applicantList = new QueryableCollectionView(context.Applicants); 066. context.Load(context.GetApplicantsQuery()); 067. 068. this._jobsList = new QueryableCollectionView(context.JobPostings); 069. context.Load(context.GetJobPostingsQuery()); 070. } 071. 072. void loadop_Completed(object sender, EventArgs e) 073. { 074. LoadOperation loadop = sender as LoadOperation; 075. 076. _interviews.Clear(); 077. 078. foreach (var ent in loadop.Entities) 079. { 080. _interviews.Add(EntityToAppointment(ent as Interview)); 081. } 082. } 083. 084. private void xJobsScheduler_AppointmentAdded(object sender, Telerik.Windows.Controls.AppointmentAddedEventArgs e) 085. { 086. // now we have a new InterviewAppointment to add to our QCV :) 087. InterviewAppointment newInterview = e.Appointment as InterviewAppointment; 088. 089. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 090. this.context.SubmitChanges((s) => 091. { 092. ActionHistory myAction = new ActionHistory(); 093. myAction.InterviewID = newInterview.InterviewID; 094. myAction.PostingID = newInterview.PostingID; 095. myAction.ApplicantID = newInterview.ApplicantID; 096. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 097. myAction.TimeStamp = DateTime.Now; 098. context.ActionHistories.Add(myAction); 099. context.SubmitChanges(); 100. } 101. , null); 102. } 103. 104. private void xJobsScheduler_AppointmentCreating(object sender, Telerik.Windows.Controls.AppointmentCreatingEventArgs e) 105. { 106. e.NewAppointment = new InterviewAppointment(); 107. } 108. 109. private void xJobsScheduler_AppointmentEdited(object sender, Telerik.Windows.Controls.AppointmentEditedEventArgs e) 110. { 111. Interview editedInterview = (from x in context.Interviews 112. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 113. select x).SingleOrDefault(); 114. 115. CopyAppointmentEdit(editedInterview, e.Appointment as InterviewAppointment); 116. 117. context.SubmitChanges((s) => 118. { 119. ActionHistory myAction = new ActionHistory(); 120. myAction.InterviewID = editedInterview.InterviewID; 121. myAction.PostingID = editedInterview.PostingID; 122. myAction.ApplicantID = editedInterview.ApplicantID; 123. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 124. myAction.TimeStamp = DateTime.Now; 125. context.ActionHistories.Add(myAction); 126. context.SubmitChanges(); 127. } 128. , null); 129. } 130. 131. private void xJobsScheduler_AppointmentDeleted(object sender, Telerik.Windows.Controls.AppointmentDeletedEventArgs e) 132. { 133. Interview deletedInterview = (from x in context.Interviews 134. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 135. select x).SingleOrDefault(); 136. 137. context.Interviews.Remove(deletedInterview); 138. context.SubmitChanges((s) => 139. { 140. ActionHistory myAction = new ActionHistory(); 141. myAction.InterviewID = deletedInterview.InterviewID; 142. myAction.PostingID = deletedInterview.PostingID; 143. myAction.ApplicantID = deletedInterview.ApplicantID; 144. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 145. myAction.TimeStamp = DateTime.Now; 146. context.ActionHistories.Add(myAction); 147. context.SubmitChanges(); 148. } 149. , null); 150. } 151. 152. #region Appointment Helpers :) 153. 154. public Interview AppointmentToEntity(InterviewAppointment ia) 155. { 156. Interview newInterview = new Interview(); 157. newInterview.Subject = ia.Subject; 158. newInterview.Body = ia.Body; 159. newInterview.Start = ia.Start; 160. newInterview.End = ia.End; 161. newInterview.ApplicantID = ia.ApplicantID; 162. newInterview.PostingID = ia.PostingID; 163. newInterview.InterviewID = ia.InterviewID; 164. 165. return newInterview; 166. } 167. 168. public InterviewAppointment EntityToAppointment(Interview ia) 169. { 170. InterviewAppointment newInterview = new InterviewAppointment(); 171. newInterview.Subject = ia.Subject; 172. newInterview.Body = ia.Body; 173. newInterview.Start = ia.Start; 174. newInterview.End = ia.End; 175. newInterview.ApplicantID = ia.ApplicantID; 176. newInterview.PostingID = ia.PostingID; 177. newInterview.InterviewID = ia.InterviewID; 178. 179. return newInterview; 180. } 181. 182. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 183. { 184. entityInterview.Subject = appointmentInterview.Subject; 185. entityInterview.Body = appointmentInterview.Body; 186. entityInterview.Start = appointmentInterview.Start; 187. entityInterview.End = appointmentInterview.End; 188. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 189. entityInterview.PostingID = appointmentInterview.PostingID; 190. } 191. 192. #endregion 193. 194. #region INotifyPropertyChanged Members 195. 196. public event PropertyChangedEventHandler PropertyChanged; 197. 198. public void NotifyChanged(string propertyName) 199. { 200. if (string.IsNullOrEmpty(propertyName)) 201. throw new ArgumentException("propertyName"); 202. 203. PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); 204. } 205. 206. #endregion 207.} Nice... right? :) One really important thing to note as well. See on line 51 where I set the DataContext before the Loaded event? This is super important, as if you don't have this set before the usercontrol is loaded, the DataContextProxy has no context to use and your EditAppointmentDialog Job/Applicant dropdowns will be blank and empty. Trust me on this, took a little bit of debugging to figure out that by setting the DataContext post-loaded would only lead to disaster and frustration. Otherwise, the only other real difference is that instead of sending an ActionHistory item through an event to get added to the database and saved, I do those right in the callback from submitting. The Result Again, I only have to post one picture because these bad boys used nearly identical code for both the MVVM and the code-behind views, so our end result is... So what have we learned here today? One, for the most part this MVVM thing is somewhat easy. Yeah, you sometimes have to write a bunch of extra code, but with the help of a few useful snippits you can turn the process into a pretty streamlined little workflow. Heck, this story gets even easier as you can see in this blog post by Michael Washington- specifically run a find on 'InvokeCommandAction' and you'll see the section regarding the command on TreeView in Blend 4. Brilliant! MVVM never looked so sweet! Otherwise, it is business as usual with RadScheduler for Silverlight whichever path you're choosing for your development. Between now and the next post, I'll be cleaning up styles a bit (those RadComboBoxes are a little too close to my labels!) and adding some to the RowDetailsViews for Applicants and Jobs, so you can see all the info for an appointment in the dropdown tab view. Otherwise, we're about ready to call a wrap on this oneDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Fix Problems Upgrading Office 2010 Beta to RTM (Final) Release

- by Mysticgeek

There are several scenarios where you may run into trouble uninstalling the 2010 Beta and trying to install the RTM (final) release. Today we’ll cover the problems we ran into, and how to fix them. You would think upgrading from the Office 2010 Beta to the final release would be an easy process. Unfortunately, it’s not always that simple. In fact, we ran into three different scenarios where the install wasn’t smooth whatsoever. If you currently have the 2010 Beta installed, you have to remove it before you can install the RTM. Here we’ll take a look at three different troublesome install scenarios we ran into, and how we fixed each one. Important Note: Before proceeding with any of these steps, make sure and backup your Outlook .pst files! Scenario 1 – Uninstall Office 2010 Beta & Fix Install Errors In this first scenario we have Office Professional Plus 2010 Beta 32-bit installed on a Windows 7 Home Premium 32-bit system. First try to uninstall the Office 2010 Beta by going into Control Panel and selecting Programs and Features. Scroll down to Microsoft Office Professional Plus 2010, right-click it and select Uninstall. Click Yes when the confirmation dialog box comes up. Wait while Office 2010 Beta uninstalls…the amount of time it takes will vary from system to system. To complete the uninstall process, a reboot is required. Fixing Setup Errors The problem is when you start the installation of the 2010 RTM… You get the following setup error even though you uninstalled the 2010 Beta. The problem is there are leftover Office apps or stand alone Office products. So, we need a utility that will clean them up for us. Windows Installer Clean Up Utility Download and install the Clean Up Utility (link Below) following the defaults. After it’s installed you’ll find it in Start \ All Programs \ Windows Install Clean Up …go ahead and launch the utility. Now go through and remove all Office Programs or addins that you find in the list. Make sure you are just deleting Office apps and not something you need like Java for example. If you’re not sure what something is, doing a quick Google search should help you out. For instance we had the Office labs Ribbon Hero installed… just highlight and click Remove. Remove anything that has something to do with Office…then reboot your machine. Now, you should be able to begin the installation of Office 2010 RTM (Final) Release without any errors. If you do get an error during the install process, like this one telling us we have old version of Groove Server… Navigate to C:\Users\username\AppData\Local\Microsoft (where username is the computer name) and delete any existing MS Office folders. Then try the install again, this solved the problem in our first scenario. Scenario 2 – Not Being Able to Uninstall 2010 Beta from Programs and Features In this next scenario we have Office Professional Plus 2010 Beta 32-bit installed on a Windows 7 Home Premium 32-bit system. Another problem we ran into is not being able to uninstall the 2010 Beta from Programs and Features. When you go in to uninstall it, nothing happens. If you run into this problem, we again need to download and install the Windows Installer Clean Up Utility (link below) and manually uninstall the Beta. When you launch it, scroll down to Microsoft Office Professional Plus 2010 (Beta), highlight it and click Remove. Click OK to the Warning Dialog box… If you see any other Office 2010, 2007, or 2003 entries you can hold the “Shift” key and highlight them all…then click Remove and click OK to the warning dialog. Now we need to delete some Registry settings. Click on Start and type regedit into the Search box and hit Enter. Navigate to HKEY_CURRENT_USER \ Software \ Microsoft \ Office and delete the folder. Then navigate to HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Office and delete those keys as well. Now go into C:\Program Files and find any of these three folders…Microsoft Office, OfficeUpdate, or OfficeUpdate14…you might find one, two or all three. Either way just rename the folders with “_OLD” (without quotes) at the end. Then go into C:\Users\username\AppData\Local\Microsoft and delete any existing MS Office folders. Where in this example we have office, Office Labs, One Note…etc. Now we want to delete the contents of the Temp folder. Click on Start and type %temp% into the Search box and hit Enter. Use the key combination “Ctrl+A” to select all the files in this folder, then right-click and click Delete, or simply hit the Delete key. If you have some files that won’t delete, just skip them as they shouldn’t affect the Office install. Then empty the Recycle Bin and restart your machine. When you get back from the restart launch the Office 2010 RTM installer and you should be good to go with installation. Because we uninstalled the Office 2010 Beta manually, you may have some lingering blank icons that you’ll need to clean up. Scenario –3 Uninstall 2007 and Install 2010 32-Bit on x64 Windows 7 For this final scenario we are uninstalling Office Professional 2007 and installing Office Professional Plus 2010 32-Bit edition on a Windows Ultimate 64-bit computer. This machine actually had Office 2010 Beta 64-bit installed at one point also, it’s since been removed, and 2007 was reinstalled. Go into Programs and Settings and uninstall Microsoft Office Professional 2007. Click Yes to the dialog box asking if you’re sure you want to uninstall it… Then wait while Office 2007 is uninstalled. The amount of time it takes will vary between systems. A restart is required to complete the process… Again we need to call upon the Windows Installer Clean Up Utility. Go through and delete any left over Office 2007 and 2010 entries. Click OK to the warning dialog that comes up. After that’s complete, navigate to HKEY_CURRENT_USER \ Software \ Microsoft \ Office and delete the folder. Then navigate to HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Office and delete those keys as well. We still need to go into C:\Users\ username\AppData\ Local\ Microsoft (where username is the computer name) and delete any Office folders. In this example we have Outlook Connector, Office, and Outlook to delete. Now let’s delete the contents of the Temp folder by typing %temp% into the Search box in the Start Menu. Then delete all of the files and folders in the Temp directory. If you have some files that won’t delete, just skip them as they shouldn’t affect the Office install. Then empty the Recycle Bin and restart your machine. If you try to install the 2010 RTM at this point you might be able to begin the install, but may get the following Error 1402 message. To solve this issue, we opened the command prompt and ran the following: secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose After the command completes, kick off the Office 2010 (Final) RTM 32-bit edition. This solved the issue and Office 2010 installed successfully. Conclusion Except for the final scenario, we found using the Windows Installer Clean Up Utility to come in very handy. Using that along with deleting a couple folders and registry settings did the trick. In the last one, we had to get a bit more geeky and use some command line magic, but it got the job done. After some extensive testing in our labs, the only time the upgrade to the RTM went smoothly was when we had a clean Vista or Windows 7 system with a fresh install of the 2010 beta only. However, chances are you went from 2003 or 2007 to the free 2010 Beta. You might also have addins or other Office products installed, so there are going to be a lot of different office files scattered throughout your PC. If that’s the case, you may run into the issues we covered here. These are a few scenarios where we got errors and were not able to install Office 2010 after removing the beta. There could be other problems, and if any of you have experienced different issues or have more good suggestions, leave a comment and let us know! Link Download Windows Installer Clean Up Utility Similar Articles Productive Geek Tips Remove Office 2010 Beta and Reinstall Office 2007How to Upgrade the Windows 7 RC to RTM (Final Release)Upgrading Ubuntu from Dapper to Edgy with Update ManagerDisable Office 2010 Beta Send-a-Smile from StartupAdd or Remove Apps from the Microsoft Office 2007 or 2010 Suite TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle ! Find That Elusive Icon with FindIcons

Read the article

Add Free Windows Live Apps to Your Website or Blog

- by Matthew Guay

Would you like to use Hotmail, Office Web Apps, Messenger, and more on your website domain? Here’s how you can add Windows Live to your website for free. Microsoft offers a popular suite of online communications products including Hotmail and Messenger. Although Hotmail hasn’t been as popular in recent years as Gmail, it is getting a refresh this summer that might make it an even better email solution. Additionally, the new Office Web Apps offer great compatibility with Office documents. While Skydrive offers 25Gb of free online file storage for all users, so Windows Live can make a great communications solution for your domain. Note: To signup for Windows Live for your domain, you will need to be able to add info to your WordPress.com blog or change Domain settings manually. Getting Started Open the Windows Live Custom Domains page (Link below) to get started adding Windows Live to your domain. Your free Windows Live account will let you create up to 500 accounts, so it’s great for teams and groups that want to have customized email addresses in addition to those who just want an email account for their website. Enter your domain or subdomain you want to add to Windows Live in the box, and then select whether you want to setup Hotmail with this or now. We want to add email to our domain, so select Set up Windows Live Hotmail for my domain and click Continue. You’ll need to sign in with a Windows Live ID to create the account, or choose to create a new Windows Live account associated with your domain. Sign in with your Windows Live ID…this can be a Hotmail, Live Messenger, XBOX Live, Zune ID, or Microsoft.com account. Or, enter your information to create a new Windows Live ID if you selected the second option. Now, review your settings and make sure everything looks correct. Click the I Accept button to setup your account. Your account is now fully setup, but you’ll need to add or edit DNS information on your site. The steps are slightly different depending if your site is hosted on WordPress.com, on your own server, or hosting service. We’ll show you how to do it on either one. First, though, note the information below this box. You’ll see settings for your Mail setup… Security settings… And Messenger integration. Make note of the settings, especially the circled ones, as we’ll need them in the next step. Integrate Windows Live with Your WordPress Blog If the domain you added to Windows Live is for your WordPress blog, login to your WordPress dashboard in a separate browser window or tab. Click the arrow beside Upgrades, and select Domains from the menu. Click the Edit DNS link beside the domain name you’re adding to Windows Live. In the text box on this page, enter the following, replacing Your_info with your code from the Mail Setup box in your Windows Live Dashboard. Note that this is the blurred section in our screenshots. It should be a numerical code like 1234567890.pamx1.hotmail.com. MX 10 Your_info.pamx1.hotmail.com. TXT v=spf1 include:hotmail.com ~all CNAME Your_info domains.live.com. Click Save DNS records, and your settings are saved to WordPress. Note that this will only integrate email with your WordPress account; you cannot integrate Messenger with a domain hosted on WordPress.com. Finally, return to your Windows Live Settings page and click Refresh. If your settings are correct, you’ll now be ready to use Windows Live on your WordPress.com domain. Integrate Windows Live with Your Own Server If your website is hosted on your own server or hosting account, you’ll need to take a few more steps to add Windows Live to your domain. This is fairly easy, but the steps may be different depending on your hosting company or registrar. With some hosts, you may have to contact support to have them add the MX records for you. Our site’s host uses the popular cPanel for website administration, so here’s how we added the MX Entries through cPanel. Login to your website’s cPanel, and select MX Entry under the Mail section. In the text box on this page, enter the following, replacing Your_info with your code from the Mail Setup box in your Windows Live Dashboard. Note that this is the blurred section in our screenshots. It should be a numerical code like 1234567890.pamx1.hotmail.com. MX 10 Your_info.pamx1.hotmail.com. Now, go back to your cPanel home, and select Advanced DNS Zone Editor under Domains. Here, add a TXT record with the following info: Name: yoursite.com. TTL: 3600 TXT Data: v=spf1 include:hotmail.com ~all Click Add Record and your Mail integration data is all configured. To integrate Messenger with your own domain, you’ll have to add an SRV entry to your DNS settings. cPanel doesn’t have an option for this, so we had to contact our site’s hosting company and they added the entry for us. Copy all of the information in the Messenger box and send it to your domain support, and they should be able to add this for you. Alternately, if you don’t want or need Messenger, then you can simply skip this step. Once all of your settings are in place, return to your Windows Live Settings page and click Refresh. If your settings are correct, you’ll now be ready to use Windows Live on your WordPress.com domain. Create a New Email Account On Your Domain Welcome to your new Windows Live admin page! Now you can add email accounts so you and anyone else you want can access Hotmail and the other Windows Live apps with your domain. Click Add to add an account. Enter an account name, which will be the email address of the account, e.g. [email protected]. Then enter the user’s name and a password for the account. By default this will be a temporary password, and the user will have to change it on first log-in, but if you’re setting up this account for yourself, you can uncheck the box and keep this as your standard password. Now, go to www.mail.live.com, and sign in with your new email address and password. Remember, your email address is your username previously entered followed by @yourdomain.com. To finish setting up the email account, enter your password, secret question and answer, alternate email, and location information. Click I accept to finish setting up your new email account. Enter the characters in the Captcha to confirm you’re a human, and click Continue. Your new Hotmail inbox will now load, and you’ll have a welcome email in your inbox. This works the same as normal Hotmail, except this time, your email address is with your own domain. You can now access any of the Windows Live services from the top-level menu. Here’s an Excel Spreadsheet open in the new Office Web Apps via SkyDrive on our new Windows Live account. If you setup Messenger access previously, you can now sign in to Windows Live Messenger using your new @yourdomain.com account as well. Important Links Accessing your Windows Live accounts is easy. Simply go to any Windows Live site, such as www.hotmail.com or www.skydrive.com, and sign in with your new Windows Live ID from your domain as normal. You don’t need a special address to access your account; it works just like the standard public Hotmail accounts. To administer your Windows Live for your domain, go to https://domains.live.com/ and sign in with the Windows Live ID you used to create the account. Here you can add more users, change settings, and view usage details for the Windows Live accounts on your domain. Conclusion Windows Live is easy to add to your domain, and lets you create up to 500 email address for it. With the upcoming updates to Hotmail and Office Web Apps coming this summer, this can be a nice way to make your domain even more useful. And with 500 email accounts, you can easily let your team take advantage of your unique address as well. If you’d rather use Google’s online applications with your domain, check out our article on how to add free Google apps to your website or blog. Link Signup for Windows Live for Your Domain Similar Articles Productive Geek Tips Tools to Help Post Content On Your WordPress BlogBackup Your Windows Live Writer SettingsInstall Windows Live Essentials In Windows 7Add Your Gmail To Windows Live MailMysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12

Read the article

Introducing… SharePress!

- by Bil Simser

For those that follow me I’ve been away from blogging and twittering for a couple of months. This is the reason. For the last few months I’ve been working with a cross-functional team putting together a new product from the people that run WordPress, the free premiere blogging platform. The result is a new product we call SharePress, a highly extensible blogging and content management platform with the usability of WordPress and the power of SharePoint combined into a single product. SharePress gives you SharePoint sites that are SEO-friendly delivered with a Web 2.0 ease of use, leveraging all of the existing abilities of SharePoint and WordPress that we know today. The Reason Back in December I was approached by the WordPress team about building a new platform that took advantage of the power of SharePoint but the ease of WordPress. I’m no stranger to WordPress and it’s 5 minute no-holds-barred install (I’ve always wanted SharePoint to do this!) and I run my personal blog on WordPress as does my better half, Princess Jenn. There’s always been a pitch by so-called Web 2.0 applications to deliver the power of SharePoint but the ease of [insert product here] over the past year or so. I checked each and every one of them out, but they fell woefully short when it came to SharePoint’s document management, versioning, and customization. They try, but it’s never been up to par in my books. On the flipside, SharePoint has always been tops in collaboration in the Enterprise but it’s painful to develop web parts, UI customization can be tricky, and there’s just no user community for something as simple as themes and designs. The Product Enter SharePress. Is it SharePoint? Is it WordPress? It’s both, and neither. Everything you like about both products are there but this is a bold new product that is positioned to bring SharePoint to the masses while maintaining the fidelity of an Enterprise 2.0 collaboration platform. SharePress delivers on all fronts including: The ability to leverage any WordPress/Joomla/Drupal/DotNetNuke themes and skins inside of SharePoint Run any WordPress/Drupal/Joomla/DotNetNuke/SharePoint plug-in/module/web part/feature works out of the box with SharePress SEO-friendly URLs and pages Permalinks for all content All the features of SharePoint Server 2010 (including InfoPath, Excel, and Access services) included in the price Small deployment footprint. You decide how much to deploy and where. Independent Database Abstraction Layer (iDal) that allows you to deploy to SQL Server 2005/2008, MySQL, and PostgreSQL Portable Rendering Engine Layer (PREL) so you host .NET or PHP on Apache or IIS (version 7 or higher). The install feature is built around WordPress and it’s famous 5-minute install (actually, it’s never taken me more than 1 minute). SharePress installs with two screens after the files are uploaded to your server (which can be done entirely using FTP): After you enter two fields of information click “Install SharePress” and you’ll be done: No mess, no fuss, no complicated dependencies, and no server access required! How simpler could this be? The Technology WordPress plug-ins and themes working with SharePoint? Of course! The answer is IronPython which has now reached a maturity level capable of doing on the fly code language conversions. SharePress is a brand new product not built on top of any previous platform but leverages all the power of each of those applications through a patent pending technique called SharePress Multi-plAtfoRm Technology (SMART). SMART will convert PHP code on the fly into Python (using SWIG as an intermediate processor) which is then compiled to MSIL and then delivered back as an ASP.NET MVC application (output is C# or VB.NET, but you can build your own SMART converter to output a different language). Sound complicated? It is, but it’s all behind the scenes and you don’t have to worry about a thing. This image illustrates the technology stack and process: So users can load up out of the box PHP themes and plug-ins from the WordPress/Joomla/Drupal community into the SMART converter and output MSIL that is used by the SharePress engine and rendered on the fly to the end user. Supported PHP versions are 4.xx and 5.xx with version 6 support to come when it’s released. Similarly you can take any .NET application, DotNetNuke Module, SharePoint Web Part or event handler and feed it into the converter to output the same. Everything is reverse compiled into MSIL so it becomes technology agnostic. No source code access is needed and the SMART converter can handle obfuscated .NET assemblies that were built with .NET 1.0, 1.1, 2.0, 3.5, and 4.0. With this technology you can also with the flip of a switch have the output create PHP pages for you. This allows you to run SharePress on Unix based systems running PHP and MySQL, allowing you to deliver your SharePoint like experience to your users with a $0 infrastructure footprint. Here’s SharePress with the default WordPress post imported then a stock SharePoint collaboration site was imported. The site was then applied with the default Kubrick theme from WordPress. The Features Deploy any of the freely available 100,000 WordPress/Joomla/Drupal themes instantly to your runtime SharePress environment and preview or activate them right from your browser. Built-in Web 2.0 jQuery Enabled End User and Administrator Web Interface. Never have to remote into a server again! Run any SharePoint Web Part or Event Handler directly without modification or access to source code in SharePress. Use any WordPress/Joomla/Drupal plug-in directly in SharePress, no local admin or access to server. Just upload and activate. Upload and Activate any SharePoint Solution Package to any site remotely. No rebuilding. Changes made to sites require no compiling or rebuilding and are published immediately. Password Protected Content. You can give passwords to individual posts, articles, pages, documents, forms, and list items. A powerful polymorphic Captcha system backs the security interface and vendors can easily tie into smart card readers, fingerprint readers, and retina scanners for authorization and identification. OpenID, Windows Live, and Windows Authentication are supported out of the box. Infinitely customizable and extensible. You can leverage plug-ins from the open source community to do practically anything, all configured and uploaded via the browser. Additionally the developer API (available soon) allows you to build extensions in .NET, PHP, and Python with little effort. Easy Importing. We have importers for Blogger, WordPress, Drupal, Joomla, DotNetNuke, and SharePoint so you can populate your site quickly and easily with full metadata modeling and creation. Banner Management. It’s easy to setup banners for your web site complete with impression numbers, special URLs, and more. Menu Manager. The Menu Manager allows you to create as many menus as you want, each one can be associated to specific audiences or roles and then be styled across multiple contexts including the same menu delivered as a fly out, rollover, drop down, and just about any navigation you can think of. Collaborative ShareBook. Our exclusive book feature allows you to setup a “book” and then authorize individuals to contribute content. Permalinks. All content in SharePress has a permanent or “perma link” associated with it so people can link to it freely without fear of broken links. Apache or IIS, Unix / Linux / BSD / Solaris / Windows / Mac OS X support. Deliver SharePress the way *you* want from the platform *you* decide. Database Independence. We know people wanted to run on any database platform so SharePress is built on top of a database abstraction layer that allows you to run on SQL Server, MySQL, PostgreSQL. Other databases can be supported by writing a supporting database script consisting of fourteen function calls. The script can be written in Perl, Python, AWK, PowerShell, Unix Shell scripts, VBA, or simple DOS batch files. The Team SharePress is the work of a lot of people in both the WordPress and SharePoint community. I worked with a lot of SharePoint MVPs to create this new product as we really wanted to deliver the most compatible and feature rich system in a product that we would be proud of. Many thanks go out to Eli Bleeker, Todd Robillard, Scot Larson, Daniel Hillier, Shane Fox, Box Peran, Amanda English, and Bill Murray for doing the heavy lifting and all of their expertise and innovative thinking to get this product out. Licensing and Pricing SharePress is still in the final stages for pricing but we’re looking at a price point somewhere between $99-$100 to make it affordable for everyone. We plan to announce final pricing sometime in the next few weeks. There are no additional charges for Enterprise versions or additional features. Everything you see is what’s available and it’s just a matter of lighting up your site with whatever feature you want to enable. The product will not be open source but source code licenses will be available to ISVs who are interested in interfacing with the API at a low level. Cost will be $25,000 USD per developer and gives you complete access to the source code to the SharePress Foundation System and the .NET 4.0 Framework source code. Conclusion We hope you enjoy the launch of SharePress as the new premium blogging and content management platform for both Intranets and the Internet. We think we’ve build the best of breed solutions here and made it easy for anyone to get started with a minimal of infrastructure but allow the scalability of SharePress to shine through in the Enterprise 2.0 world. We encourage your feedback so please leave comments as to what you’re looking for in this system as we’re always evolving it to make it a better product for everyone.

Read the article

Add Free Google Apps to Your Website or Blog

- by Matthew Guay

Would you like to have an email address from your own domain, but prefer Gmail’s interface and integration with Google Docs? Here’s how you can add the free Google Apps Standard to your site and get the best of both worlds. Note: To signup for Google Apps and get it setup on your domain, you will need to be able to add info to your WordPress blog or change Domain settings manually. Getting Started Head to the Google Apps signup page (link below), and click the Get Started button on the right. Note that we are signing up for the free Google Apps which allows a max of 50 users; if you need more than 50 email addresses for your domain, you can choose Premiere Edition instead for $50/year. Select that you are the Administrator of the domain, and enter the domain or subdomain you want to use with Google Apps. Here we’re adding Google Apps to the techinch.com site, but we could instead add Apps to mail.techinch.com if needed…click Get Started. Enter your name, phone number, an existing email address, and other Administrator information. The Apps signup page also includes some survey questions about your organization, but you only have to fill in the required fields. On the next page, enter a username and password for the administrator account. Note that the user name will also be the administrative email address as [email protected]. Now you’re ready to authenticate your Google Apps account with your domain. The steps are slightly different depending on whether your site is on WordPress.com or on your own hosting service or server, so we’ll show how to do it both ways. Authenticate and Integrate Google Apps with WordPress.com To add Google Apps to a domain you have linked to your WordPress.com blog, select Change yourdomain.com CNAME record and click Continue. Copy the code under #2, which should be something like googleabcdefg123456. Do not click the button at the bottom; wait until we’ve completed the next step. Now, in a separate browser window or tab, open your WordPress Dashboard. Click the arrow beside Upgrades, and select Domains from the menu. Click the Edit DNS link beside the domain name you’re adding to Google Apps. Scroll down to the Google Apps section, and paste your code from Google Apps into the verification code field. Click Generate DNS records when you’re done. This will add the needed DNS settings to your records in the box above the Google Apps section. Click Save DNS records. Now, go back to the Google Apps signup page, and click I’ve completed the steps above. Authenticate Google Apps on Your Own Server If your website is hosted on your own server or hosting account, you’ll need to take a few more steps to add Google Apps to your domain. You can add a CNAME record to your domain host using the same information that you would use with a WordPress account, or you can upload an HTML file to your site’s main directory. In this test we’re going to upload an HTML file to our site for verification. Copy the code under #1, which should be something like googleabcdefg123456. Do not click the button at the bottom; wait until we’ve completed the next step first. Create a new HTML file and paste the code in it. You can do this easily in Notepad: create a new document, paste the code, and then save as googlehostedservice.html. Make sure to select the type as All Files or otherwise the file will have a .txt extension. Upload this file to your web server via FTP or a web dashboard for your site. Make sure it is in the top level of your site’s directory structure, and try visiting it at yoursite.com/googlehostedservice.html. Now, go back to the Google Apps signup page, and click I’ve completed the steps above. Setup Your Email on Google Apps When this is done, your Google Apps account should be activated and ready to finish setting up. Google Apps will offer to launch a guide to step you through the rest of the process; you can click Launch guide if you want, or click Skip this guide to continue on your own and go directly to the Apps dashboard. If you choose to open the guide, you’ll be able to easily learn the ropes of Google Apps administration. Once you’ve completed the tutorial, you’ll be taken to the Google Apps dashboard. Most of the Google Apps will be available for immediate use, but Email may take a bit more setup. Click Activate email to get your Gmail-powered email running on your domain. Add Google MX Records to Your Server You will need to add Google MX records to your domain registrar in order to have your mail routed to Google. If your domain is hosted on WordPress.com, you’ve already made these changes so simply click I have completed these steps. Otherwise, you’ll need to manually add these records before clicking that button. Adding MX Entries is fairly easy, but the steps may depend on your hosting company or registrar. With some hosts, you may have to contact support to have them add the MX records for you. Our site’s host uses the popular cPanel for website administration, so here’s how we added the MX Entries through cPanel. Add MX Entries through cPanel Login to your site’s cPanel, and click the MX Entry link under Mail. Delete any existing MX Records for your domain or subdomain first to avoid any complications or interactions with Google Apps. If you think you may want to revert to your old email service in the future, save a copy of the records so you can switch back if you need. Now, enter the MX Records that Google listed. Here’s our account after we added all of the entries to our account. Finally, return to your Google Apps Dashboard and click the I have completed these steps button at the bottom of the page. Activating Service You’re now officially finished activating and setting up your Google Apps account. Google will first have to check the MX records for your domain; this only took around an hour in our test, but Google warns it can take up to 48 hours in some cases. You may then see that Google is updating its servers with your account information. Once again, this took much less time than Google’s estimate. When everything’s finished, you can click the link to access the inbox of your new Administrator email account in Google Apps. Welcome to Gmail … at your own domain! All of the Google Apps work just the same in this version as they do in the public @gmail.com version, so you should feel right at home. You can return to the Google Apps dashboard from the Administrative email account by clicking the Manage this domain at the top right. In the Dashboard, you can easily add new users and email accounts, as well as change settings in your Google Apps account and add your site’s branding to your Apps. Your Google Apps will work just like their standard @gmail.com counterparts. Here’s an example of an inbox customized with the techinch logo and a Gmail theme. Links to Remember Here are the common links to your Google Apps online. Substitute your domain or subdomain for yourdomain.com. Dashboard https://www.google.com/a/cpanel/yourdomain.com Email https://mail.google.com/a/yourdomain.com Calendar https://www.google.com/calendar/hosted/yourdomain.com Docs https://docs.google.com/a/yourdomain.com Sites https://sites.google.com/a/yourdomain.com Conclusion Google Apps offers you great webapps and webmail for your domain, and let’s you take advantage of Google’s services while still maintaining the professional look of your own domain. Setting up your account can be slightly complicated, but once it’s finished, it will run seamlessly and you’ll never have to worry about email or collaboration with your team again. Signup for the free Google Apps Standard Similar Articles Productive Geek Tips Mysticgeek Blog: Create Your Own Simple iGoogle GadgetAccess Your Favorite Google Services in Chrome the Easy WayRevo Uninstaller Pro [REVIEW]Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPFind Similar Websites in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox

Read the article

Customize the Windows Media Center Start Menu with Media Center Studio

- by DigitalGeekery

Do you ever wish you could change the WMC start menu? Maybe move some of the tiles and strips around to different locations, add new ones, or eliminate some altogether? Today we look at how to do it using Media Center Studio. Download and install Media Center Studio. (Download link below) You’ll also want to make sure you have Windows Media Center closed before running Media Center Studio. Many of the actions cannot be performed with Media Center open. Once installed, you can open Media Center Studio from the Windows Start Menu. When you first open Media Center Studio you’ll be on the Themes tab. Click on the Start Menu tab. It should be noted that Media Center Studio is a Beta application, and it did crash on us a few times, so it’s a good idea to save your work frequently. You can save your changes by selecting Save on the Home tab, or by clicking the small disk icon at the top left. We also found that that trying to launch Media Center from the Start Media Center button on the application ribbon typically didn’t work. Opening Windows Media Center from the Windows Start Menu is preferred. When you’re on the Start Menu tab you will see the Windows Media Center menu strips and tiles. Click the arrows located at the right, left, top, and bottom of the screen to scroll through the various menu strips. Hiding and Removing Tiles and Menu Strips. If there is an entire menu strip that you never use and would like to remove from Media Center, simply uncheck the box to the left of the the title above that menu strip. If you’d like to hide individual tiles, uncheck the box next to the name of the individual tile. Renaming Tiles and Strips To rename a tile or menu strip, click on the small notepad icon next to the title. Note: If you do not see a small notepad icon next to the title, then the title is not editable. This applies to many of the “Promo” tiles. The title will turn into a text input box so that you can edit the name. Click away from the text box when finished. Here we will change the title of the default Movie strip to “Flicks.” Change the Default Tile and Menu Strip The Default menu strip is the strip that is highlighted, or on focus, when you open Media Center. To change the default strip, simply click once on another strip to highlight it, and then save your work. In our example, I’m going to make our newly renamed “Flicks” strip the default. Each menu strip has a default tile. This is the tile that is active, or on focus, when you select the menu strip. To change the default tile on a strip, click once on the tile. You will see it outlined in light blue. Now just simply save your changes. In our example below, we’ve changed the default tile on the TV strip to “guide.” Moving Tiles and Menu Strips You can move an entire Menu Strip up or down on the screen. When you hover your mouse over the a menu strip, you will see up and down arrows appear to the right and left of the title. Click on the arrows to move the strip up or down. You will see the menu strip appear in it’s new position. To move a tile to a new menu strip, click and drag the tile you’d like to move. When you begin to drag the tile, green plus (+) signs will appear in between the tiles. Drag and drop the tile onto to any of these green plus signs to move it to that location. When you’ve dragged the tile over an acceptable position, you’ll see the red “Move” label next to your cursor turn to a blue “Move to” label. Now you can drop the tile into position. You’ll see the tile located in it’s new position. Adding a New Custom Menu Strip Click on the Start Menu tab and then select the Menu Strip button. You will see a new Custom Menu strip appear on your Start Menu with the default name of Custom menu. You can change the name by clicking on the notepad icon just as we did earlier. For our example, we’ll change the name of the new strip to Add-ins. To add a new tile, click on Entry Points at the lower left of the application window. This will reveal all of your available Entry Points that can be added to the Media Center Menu. You should see the built-in Media Center Games and any Media Center Plug-ins you have added to your system. You can then drag and drop any of the Entry Points onto any of the Menu Strips. Below we’ve added Media Browser to our custom Add-ins menu strip. You can also add additional applications to launch directly from Media Center. Click on the Application button on the Start Menu tab. Note: Many applications may not work with your remote, but with keyboard and mouse only. Type in a title which will appear under the tile in Media Center, and then type the path to the application. In our example, we will add Internet Explorer 8. Note: Be sure to add the actual path to the application and not just a link on the desktop. Click any of the check boxes to select any options under Required Capabilities. You can also browse to choose an image if you don’t care for the image that appears automatically. Next, you can select keyboard strokes to press to exit the application and return to Media Center. Click the green plus (+) button. When prompted, press a key you’ll use to close the program. Repeat the process if you’d also like to select a keystroke to kill the program. You’ll see your button programs listed below. When you’re finished, save your work and close out of Media Center Studio. Now your new program entry point will appear in the Entry Points section. Drag the icon to the desired position on the Start Menu and save again before exiting Media Center Studio. When you open Media Center you will see your new application on the start menu. Click the tile to open the application just as you would any other tile. The application will open and minimize Media Center. When you press the key you choose to close the program, Windows Media Center will automatically be restored. Note: You can also exit the application through normal methods by clicking the red “X” or File > Exit. Conclusion Media Center Studio is a Beta application which the developer freely admits still has some bugs. Despite it’s flaws Media Center Studio is a powerful tool, and when it comes to customizing your Media Center start menu, it’s pretty much the only game in town. It works with both Vista and Windows 7, and according to the developer, has not been officially tested with extenders. Media Center Studio can also be used to add custom themes to Windows 7 Media Center and we’ll be covering that in a future article. Looking for more ways to customize your Media Center experience? Be sure to check out our earlier posts on Media Browser, as well as how to add Hulu, Boxee, and weather conditions your Windows 7 Media Center. Download Media Center Studio Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)How To Rip a Music CD in Windows 7 Media CenterSchedule Updates for Windows Media CenterStartup Customizations for Media Center in Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall

Read the article

Stream Media and Live TV Across the Internet with Orb

- by DigitalGeekery

Looking for a way to stream your media collection across the Internet? Or perhaps watch and record TV remotely? Today we are going to look at how to do all that and more with Orb. Requirements Windows XP / Vista / 7 or Intel based Mac w/ OS X 10.5 or later. 1 GB RAM or more Pentium 4 2.4 GHz or higher / AMD Athlon 3200+ Broadband connections TV Tuner for streaming and recording live TV (optional) Note: Slower internet connections may result in stuttering during playback. Installation and Setup Download and install Orb on your home computer. (Download link below) You’ll want to take the defaults for the initial portion of the install. When we get to the Orb Account setup portion of the install is when we will have to enter information and make some decisions. Choose your language and click Next. We’ll need to create and user account and password. A valid email address is required as we’ll need to confirm the account later. Click Next. Now you’ll want to choose your media sources. Orb will automatically look for folders that may contain media files. You can add or remove folders click on the (+) or (-) buttons. To remove a folder, click on it once to select it from the list and then click the minus (-) button. To add a folder, click the plus (+) button and browse for the folder. You can add local folders as well as shared folders from networked computers and USB attached storage. Note: Both the host computer running Orb and the networked computer will need to be running to access shared network folders remotely. When you’ve selected all your media files, click Next. Orb will proceed to index your media files… When the indexing is complete, click Next. Orb TV Setup Note: Streaming Live TV to Macs is not currently supported. If you have a TV tuner card connected to your PC, you can opt to configure Orb to stream live or recorded TV. Click Next to configure TV. Or, choose Skip if you don’t wish to configure Orb for TV. If you have a Digital tuner card, type in your Zip Code and click Get List to pull your channel listings. Select a TV provider from the list and click Next. If not, click Skip. You can select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished. Next choose an analog provider, if necessary, and click Next. Select “Yes” or “No” for a set top box and click Next. Just as we did with the Digital tuner, select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished. Now we’re finished with the setup. Click Close. Accessing your Media Remotely Media files are accessed through a web-based interface. Before we go any further, however, we’ll need to confirm our username and password. Check your inbox for an email from Orb Networks. Click the enclosed confirmation link. You’ll be prompted to enter the username and password you selected in your browser then click Next. Your account will be confirmed. Now, we’re ready to enjoy our media remotely. To get started, point your browser to the MyCast website from your remote computer. (See link below) Enter your credentials and click Log In. Once logged in, you’ll be presented with the MyCast Home screen. By default you’ll see a handful of “channels” such as a TV program guide, random audio and photos, video favorites, and weather. You can add, remove, or customize channels. To add additional channels, click on Add Channels at the top right… …and select from the dropdown list. To access your full media libraries, click Open Application at the top left and select from one of the options. Live and Recorded TV If you have a TV tuner card you configured for Orb, you’ll see your program guide on the TV / Webcams screen. To watch or record a show, click on the program listing to bring up a detail box. Then click the red button to record, or the green button to play. When recording a show, you’ll see a pulsating red icon at the top right of the listing in the program guide. If you want to watch Live TV, you may be prompted to choose your media player, depending on your browser and settings. Playback should begin shortly. Note for Windows Media Center Users If you try to stream live TV in Orb while Windows Media Center is running on your PC, you’ll get an error message. Click the Stop MediaCenter button and then try again. Audio On the Audio screen, you’ll find your music files indexed by genre, artist, and album. You can play a selection by clicking once and then clicking the green play button, or by simply double-clicking. Playback will begin in the default media player for the streaming format. Video Video works essentially the same as audio. Click on a selection and press the green play button, or double-click on the video title. Video playback will begin in the default media player for the streaming format. Streaming Formats You can change the default streaming format in the control panel settings. To access the Control Panel, click on Open Applications and select Control Panel. You can also click Settings at the top right. Select General from the drop down list and then click on the Streaming Formats tab. You are provided four options. Flash, Windows Media, .SDP, and .PLS. Creating Playlists To create playlists, drag and drop your media title to the playlist work area on the right, or click Add to playlist on the top menu. Click Save when finished. Sharing your Media Orb allows you to share media playlists across the Internet with friends and family. There are a few ways to accomplish this. We’ll start by click the Share button at the bottom of the playlist work area after you’ve compiled your playlist. You’ll be prompted to choose a method by which to share your playlist. You’ll have the option to share your playlist publicly or privately. You can share publically through links, blogs, or on your Orb public profile. By choosing the Public Profile option, Orb will automatically create a profile page for you with a URL like http://public.orb.com/username that anyone can easily access on the Internet. The private sharing option allows you to invite friends by email and requires recipients to register with Orb. You can also give your playlist a custom name, or accept the auto-generated title. Click OK when finished. Users who visit your public profile will be able to view and stream any of your shared playlists to their computer or supported device. Portable Media Devices and Smartphones Orb can stream media to many portable devices and 3G phones. Streaming audio is supported on the iPhone and iPod Touch through the Safari browser. However, video and live TV streaming requires the Orb Live iPhone App. Orb Live is available in the App store for $9.99. To stream media to your portable device, go to the MyCast website in your mobile browser and login. Browse for your media or playlist. Make a selection and play the media. Playback will begin. We found streaming music to both the Droid and the iPhone to work quite nicely. Video playback on the Droid, however, left a bit to be desired. The video looked good, but the audio tended to be out of sync. System Tray Control Panel By default Orb runs in the system tray on start up. To access the System Tray Control Panel, right-click on the Orb icon in the system tray and select Control Panel. Login with your Orb username and password and click OK. From here you can add or remove media sources, add manage accounts, change your password, and more. If you’d rather not run Orb on Startup, click the General icon. Unselect the checkbox next to Start Orb when the system starts. Conclusion It may seem like a lot of steps, but getting Orb up and running isn’t terribly difficult. Orb is available for both Windows and Intel based Macs. It also supports streaming to many Game Consoles such as the Wii, PS3, and XBox 360. If you are running Windows 7 on multiple computers, you may want to check out our write-up on how to stream music and video over the Internet with Windows Media Player 12. Downloads Download Orb Logon to MyCast Similar Articles Productive Geek Tips Stream Music and Video Over the Internet with Windows Media Player 12Enable Media Streaming in Windows Home Server to Windows Media PlayerStream Media from Windows 7 to XP with VLC Media PlayerShare Digital Media With Other Computers on a Home Network with Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

Read the article

CloudBerry Online Backup 1.5 for Windows Home Server

- by The Geek

Overview CloudBerry Online Backup version 1.5 is a front end application for Amazon S3 storage for backing up your Windows Home Server data. It makes backing up your essential data to Amazon S3 an easy process in the event the disaster strikes. Installation You install the Cloudberry Addin as you do for any addins for Windows Home Server. On a PC on your network, browse to the shared folders on your server and open the Add-Ins folder and copy over WHS_CloudBerryOnlineBackupSetup_v1.5.0.81S3o.msi (link below), then close out of the folder. Next launch the Windows Home Server Console, click Settings, then Add-Ins. Click on the Available tab and click the Install button. It installs very quickly, and when you get the Installation Succeeded dialog click OK. You will lose connection through the Console, just click OK, then reconnect. After reconnecting, you’ll see CloudBerry Backup has been installed, and you can begin using it. You can setup a backup plan right away or find out what’s new with version 1.5. Amazon S3 Account If you don’t already have an Amazon S3 account, you’ll be prompted to create a new one. Click on the Create an account hyperlink, which takes you to the Amazon S3 page where you can sign up. After reviewing the functionality of Amazon S3, click on the Sign Up for Amazon S3 button. Enter in your contact information and accept the Amazon Web Services Customer Agreement. You’re then shown their pricing for storage plans. The amount of storage space you use will depend on your needs. It’s relatively cheap for smaller amounts of data. Just keep in mind the more data you store and download, the more S3 is going to cost. Note: Amazon S3 is introducing Reduced Redundancy Storage which will lower the cost of the data stored on S3. CloudBerry 1.5 will support this new feature. You can find out more about this new pricing structure. Note: Keep in mind that after you first sign up for an Amazon S3 account, it can take up to 24 hours to be authorized. In fact, you may want to sign up for the S3 account before installing the Add-In. After you sign up for your S3 Account, you’ll be given access credentials which you can enter in and create a Storage Bucket name. Features & Use CloudBerry is wizard driven, straight-forward and easy to use. Here we take a look at creating a backup plan. To begin, click on the Setup Backup Plan button to kick off the wizard. Select your backup mode based on the amount of features you want. In our example we’re going to select Advanced Mode as it offers more features than Simple Mode. Select your backup storage account or create a new one. You can select a default account by checking Use currently selected account as default. Now you can go through and select the files and folders you want to backup from your home server. Check the box Show physical drives to get more of a selection of files and folders. This also allows you to backup files from your data drive as well. It has full support for drive extenders so you can backup your shares as well. The cool thing about Cloudberry is it allows you to drill down specific files and folders unlike other WHS backup utilities. Next you can use advanced filters to specify files and/or folders to skip if you want. There are compression and encryption options as well. This will save storage space, bandwidth, and keep your data secure. Purge Options allow you to customize options for getting rid of older files. You can also select the option to delete files from the S3 service that have been deleted locally. Be careful with this option however, as you won’t be able to restore files if you delete them locally. You have some nice scheduling options from running backups manually, specific date and time, or recurring daily, weekly or monthly. Receive email notifications in all cases or when a backup fails. This is a good option so you know if things were successful or something failed, and you need to back it up manually. Email notifications… Give your plan a name… Then if the summary page looks good you can continue, or still go back at this point if something doesn’t look correct and needs adjusting. That’s it! You’re ready to go, and you have an option to start your first backup right away. After you’ve created a backup plan, you can go in and edit, delete, view history, or restore files. Restoring Files using CloudBerry To restore data from your backups kick off the Restore Wizard and select the backup to restore from. You can select the last backup, a specific point in time, or manually browse through the files. Browse through the directory and select the files you need to restore. Choose the destination to restore the files to. You can select from the original location, a specific location, to overwrite existing files, or set the location as the default for future restores. If the files are encrypted, enter in the correct passwords. If the summary looks good, click on Next to start the restore process. You’ll be shown a progress bar at the bottom of the screen while the files are restored. After the process has completed, close out of the Restore Wizard. In this example we restored a couple of music files to the desktop of Windows Home Server… But as shown above you can save them to the original location, other network locations, or WHS shared folders. This can make it a lot easier to keep track of files you’ve restored. You can also access different options for CloudBerry by clicking Settings in WHS Console then CloudBerry Backup. Here you can set up a new storage account, check for updates, app options, Diagnostics, and send feedback. Under Options there are several settings you can tweak to get the best experience for your WHS backups. CloudBerry Web Interface Another nice feature is the CloudBerry Web Interface so you can access your data from anywhere you have an Internet connection. To check it out in WHS Console, click on the Backup Web Interface link…you’ll probably want to bookmark the link in your favorite browser. Note: This feature is still in beta and at the time of this review, the Web Interface wasn’t up and running so we weren’t able to test it out. Performance The Cloudberry app works very well through the Windows Home Server Console. The amount of time it takes to backup or restore your data will depend on the speed of your Internet connection and size of the files. In our tests, backing up 1GB of data to the Amazon S3 account took around an hour, but we were running it on a DSL with limited upload speeds so your mileage will vary. Product Support In our experience, the team at CloudBerry offered great support in a timely manner when contacting them. You can fill out a help request through a form on their website and they also have a community forum. Conclusion We were very pleased with CloudBerry Online Backup for WHS. It’s wizard driven interface makes it extremely easy to use, and offers comprehensive backup choices for your Amazon S3 account. CloudBerry will only backup files that have been modified, so if files haven’t been changed, they won’t be backed up again.They offer a free 15 day trial and is $29.99 after that for a full license. Once you buy the app you own it, and charges to your S3 account will vary depending on the amount of data you upload. If you’re looking for an effective and easy to use front end application to backup your Windows Home Server data to your Amazon S3 account, CloudBerry is a recommended affordable choice. Download CloudBerry for Windows Home Server Sign Up For Amazon S3 Account Rating Installation: 9 Ease of Use: 8 Features: 8 Performance: 8 Product Support: 8 Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerBackup Windows Home Server Folders to an External Hard DriveBackup Your Windows Home Server Off-Site with Asus WebstorageRemove a Network Computer from Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox)

Read the article

Productivity Tips

- by Brian T. Jackett

A few months ago during my first end of year review at Microsoft I was doing an assessment of my year. One of my personal goals to come out of this reflection was to improve my personal productivity. While I hear many people say “I wish I had more hours in the day so that I could get more done” I feel like that is the wrong approach. There is an inherent assumption that you are being productive with your time that you already have and thus more time would allow you to be as productive given more time. Instead of wishing I could add more hours to the day I’ve begun adopting a number of processes or behavior changes in my personal life to make better use of my time with the goal of improving productivity. The areas of focus are as follows: Focus Processes Tools Personal health Email Note: A number of these topics have spawned from reading Scott Hanselman’s blog posts on productivity, reading of David Allen’s book Getting Things Done, and discussions with friends and coworkers who had great insights into this topic. Focus Pre-reading / viewing: Overcome your work addiction Millennials paralyzed by choice Its Not What You Read Its What You Ignore (Scott Hanselman video) I highly recommend Scott Hanselman’s video above and this post before continuing with this article. It is well worth the 40+ mins price of admission for the video and couple minutes for article. One key takeaway for me was listing out my activities in an average week and realizing which ones held little or no value to me. We all have a finite amount of time to work each day. Do you know how much time and effort you spend on various aspects of your life (family, friends, religion, work, personal happiness, etc.)? Do your actions and commitments reflect your priorities? The biggest time consumers with little value for me were time spent on social media services (Twitter and Facebook), playing an MMO video game, and watching TV. I still check up on Facebook, Twitter, Microsoft internal chat forums, and other services to keep contact with others but I’ve reduced that time significantly. As for TV I’ve cut the cord and no longer subscribe to cable TV. Instead I use Netflix, RedBox, and over the air channels but again with reduced time consumption. With the time I’ve freed up I’m back to working out 2-3 times a week and reading 4 nights a week (both of which I had been neglecting previously). I’ll mention a few tools for helping measure your time in the Tools section. Processes Do not multi-task. I’ll say it again. Do not multi-task. There is no such thing as multi tasking. The human brain is optimized to work on one thing at a time. When you are “multi-tasking” you are really doing 2 or more things at less than 100%, usually by a wide margin. I take pride in my work and when I’m doing something less than 100% the results typically degrade rapidly. Now there are some ways of bending the rules of physics for this one. There is the notion of getting a double amount of work done in the same timeframe. Some examples would be listening to podcasts / watching a movie while working out, using a treadmill as your work desk, or reading while in the bathroom. Personally I’ve found good results in combining one task that does not require focus (making dinner, playing certain video games, working out) and one task that does (watching a movie, listening to podcasts). I believe this is related to me being a visual and kinesthetic (using my hands or actually doing it) learner. I’m terrible with auditory learning. My fiance and I joke that sometimes we talk and talk to each other but never really hear each other. Goals / Tasks Goals can give us direction in life and a sense of accomplishment when we complete them. Goals can also overwhelm us and give us a sense of failure when we don’t complete them. I propose that you shift your perspective and not dwell on all of the things that you haven’t gotten done, but focus instead on regularly setting measureable goals that are within reason of accomplishing. At the end of each time frame have a retrospective to review your progress. Do not feel guilty about what you did not accomplish. Feel proud of what you did accomplish and readjust your goals for the next time frame to more attainable goals. Here is a sample schedule I’ve seen proposed by some. I have not consistently set goals for each timeframe, but I do typically set 3 small goals a day (this blog post is #2 for today). Each day set 3 small goals Each week set 3 medium goals Each month set 1 large goal Each year set 2 very large goals Tools Tools are an extension of our human body. They help us extend beyond what we can physically and mentally do. Below are some tools I use almost daily or have found useful as of late. Disclaimer: I am not getting endorsed to promote any of these products. I just happen to like them and find them useful. Instapaper – Save internet links for reading later. There are many tools like this but I’ve found this to be a great one. There is even a “read it later” JavaScript button you can add to your browser so when you navigate to a site it will then add this to your list. Stacks for Instapaper – A Windows Phone 7 app for reading my Instapaper articles on the go. It does require a subscription to Instapaper (nominal $3 every three months) but is easily worth the cost. Alternatively you can set up your Kindle to sync with Instapaper easily but I haven’t done so. SlapDash Podcast – Apps for Windows Phone and Windows 8 (possibly other platforms) to sync podcast viewing / listening across multiple devices. Now that I have my Surface RT device (which I love) this is making my consumption easier to manage. Feed Reader – Simple Windows 8 app for quickly catching up on my RSS feeds. I used to have hundreds of unread items all the time. Now I’m down to 20-50 regularly and it is much easier and faster to consume on my Surface RT. There is also a free version (which I use) and I can’t see much different between the free and paid versions currently. Rescue Time – Have you ever wondered how much time you’ve spent on websites vs. email vs. “doing work”? This service tracks your computer actions and then lets you report on them. This can help you quantitatively identify areas where your actions are not in line with your priorities. PowerShell – Windows automation tool. It is now built into every client and server OS. This tool has saved me days (and I mean the full 24 hrs worth) of time and effort in the past year alone. If you haven’t started learning PowerShell and you administrating any Windows OS or server product you need to start today. Various blogging tools – I wrote a post a couple years ago called How I Blog about my blogging process and tools used. Almost all of it still applies today. Personal Health Some of these may be common sense or debatable, but I’ve found them to help prioritize my daily activities. Get plenty of sleep on a regular basis. Sacrificing sleep too many nights a week negatively impacts your cognition, attitude, and overall health. Exercise at least three days. Exercise could be lifting weights, taking the stairs up multiple flights of stairs, walking for 20 mins, or a number of other "non-traditional” activities. I find that regular exercise helps with sleep and improves my overall attitude. Eat a well balanced diet. Too much sugar, caffeine, junk food, etc. are not good for your body. This is not a matter of losing weight but taking care of your body and helping you perform at your peak potential. Email Email can be one of the biggest time consumers (i.e. waster) if you aren’t careful. Time box your email usage. Set a meeting invite for yourself if necessary to limit how much time you spend checking email. Use rules to prioritize your email. Email from external customers, my manager, or include me directly on the To line go into my inbox. Everything else goes a level down and I have 30+ rules to further sort it, mostly distribution lists. Use keyboard shortcuts (when available). I use Outlook for my primary email and am constantly hitting Alt + S to send, Ctrl + 1 for my inbox, Ctrl + 2 for my calendar, Space / Tab / Shift + Tab to mark items as read, and a number of other useful commands. Learn them and you’ll see your speed getting through emails increase. Keep emails short. No one Few people like reading through long emails. The first line should state exactly why you are sending the email followed by a 3-4 lines to support it. Anything longer might be better suited as a phone call or in person discussion. Conclusion In this post I walked through various tips and tricks I’ve found for improving personal productivity. It is a mix of re-focusing on the things that matter, using tools to assist in your efforts, and cutting out actions that are not aligned with your priorities. I originally had a whole section on keyboard shortcuts, but with my recent purchase of the Surface RT I’m finding that touch gestures have replaced numerous keyboard commands that I used to need. I see a big future in touch enabled devices. Hopefully some of these tips help you out. If you have any tools, tips, or ideas you would like to share feel free to add in the comments section. -Frog Out Links Scott Hanselman Productivity posts http://www.hanselman.com/blog/CategoryView.aspx?category=Productivity Overcome your work addiction http://blogs.hbr.org/hbsfaculty/2012/05/overcome-your-work-addiction.html?awid=5512355740280659420-3271 Millennials paralyzed by choice http://priyaparker.com/blog/millennials-paralyzed-by-choice Its Not What You Read Its What You Ignore (video) http://www.hanselman.com/blog/ItsNotWhatYouReadItsWhatYouIgnoreVideoOfScottHanselmansPersonalProductivityTips.aspx Cutting the cord – Jeff Blankenburg http://www.jeffblankenburg.com/2011/04/06/cutting-the-cord/ Building a sitting standing desk – Eric Harlan http://www.ericharlan.com/Everything_Else/building-a-sitting-standing-desk-a229.html Instapaper http://www.instapaper.com/u Stacks for Instapaper http://www.stacksforinstapaper.com/ Slapdash Podcast Windows Phone - http://www.windowsphone.com/en-us/store/app/slapdash-podcasts/90e8b121-080b-e011-9264-00237de2db9e Windows 8 - http://apps.microsoft.com/webpdp/en-us/app/slapdash-podcasts/0c62e66a-f2e4-4403-af88-3430a821741e/m/ROW Feed Reader http://apps.microsoft.com/webpdp/en-us/app/feed-reader/d03199c9-8e08-469a-bda1-7963099840cc/m/ROW Rescue Time http://www.rescuetime.com/ PowerShell Script Center http://technet.microsoft.com/en-us/scriptcenter/bb410849.aspx

Read the article

Run WordPress & Other Web Apps with Windows Web Platform

- by Matthew Guay

Would you like to run WordPress or other web apps on your PC so you can easily test and design websites? Here we’ll look at how you can get the latest web apps on your computer in only a few quick steps. Many web apps today, such as WordPress, MediaWiki, and more, are open source and can be run for free from any computer with even a simple local web server. They are often very difficult to install on your computer, since they require a number of dependencies such as PHP and MySQL. Microsoft has worked to make this easier, releasing the Windows Web Platform Installer. This lets you install many popular web apps and free tools in Windows with only a few clicks. Here we’re going to look at how to install WordPress and the free Visual Web Developer 2010 Express to edit web code with the Web Platform Installer. But, if you’d rather install a different web app or tool, feel free to choose those as the installations are generally similar. Getting Started Head over to Microsoft’s Web development site and download the Web Platform Installer (link below). This will download very quick, as it is just a small loader. When you run this loader, it will download the Web Platform Installer files. The Web Platform Installer works on XP, Vista, and Windows 7, as well as the related versions of Windows Server. After a couple moments, the Web Platform Installer will open and load information about the latest web offerings. Now you can choose what you want to install. You can quickly select the recommended products for several categories such as Web Server, Database, and more. Alternately, click Customize under the category and select exactly what you want to install. Note that items already installed on your computer will be grayed out. We wanted to install Visual Web Developer 2010 Express, so select Customize under Tools, and select Visual Web Developer 2010 Express. Or, for more preset choices, select Options on the bottom of the window. You can choose to add Multimedia, Developer, and Enterprise tools to the lists, or add a new preset list from a feed. Choose Specific Web apps to Install We wanted to install WordPress, so instead of choosing a preset, select the Web Applications tab on the left. Now you can choose from a variety of apps based on category, or you can view them all together in an A to Z, Most Popular, or Highest Rating list. Click the checkbox beside the app you want to install to select it, or click the “i” for more information. Here’s the More Information pane for WordPress. If you’re ready to install it, click the checkbox. Now you can go back and add more web apps or tools to the install list if you like. The Web Platform Installer will automatically find and select prerequisite apps such as MySQL, so you won’t need to worry about finding them. Once you’ve selected everything you want to install, click the Install button on the bottom of the window. The Web Platform Installer will now show you everything that’s selected, including components that it automatically selected. Notice we only chose to install WordPress and Visual Web Developer 2010 Express, but it also has selected MySQL and PHP automatically. Click I Accept to proceed. Enter an administrator password for MySQL before the setup begins. Now the Web Platform Installer will take over, automatically downloading, installing, and configuring all of your web apps. It will also activate optional Windows components that may be needed on your computer. This may take several minutes, depending on the components you selected and your internet speed. Setting up Your Test Site Once the installation is finished, you’ll be asked to enter some information about your site. You can simply accept the defaults or enter your own choices, and then click Continue. Now you’ll need to enter some information for your web apps. When installing WordPress, you’ll need to choose a database and enter administrative usernames and passwords. You may also be asked to enter extra information for additional security, but for a local-only test site this isn’t necessary. Click Continue when you’re finished. You’ll need to wait a few more moments as it complete the setup of your web apps. The good thing is, once it’s finished, they’ll be ready to go with only minimal configuration. And you’re finished! The installer will let you know everything it installed, and if there were any problems. In our test, Visual Web Developer 2010 Express failed to install successfully. Often the problems may be with the download, so click Finish and then reselect the apps that didn’t install and run the installer again. Now you’re ready to run WordPress from your PC. Click the Launch WordPress link or enter http://localhost:80/wordpress in your browser to get started. You’ll only have a little more setup to do on WordPress to get it running. Once you’ve opened your WordPress page in your browser, enter a name for your blog and your email address, and click Install WordPress. After a few seconds, you should see a Success! page with your username and a temporary password. Copy the password, and then click Log In. Enter admin as the Username and paste the random generated password, and click Log In. WordPress will remind you to change the default password. Click the Yes, Take me to my profile page link to do this. Enter something easier for you to remember, and click Update Profile. Now you’re ready to enjoy your new WordPress install on Windows. You can add plugins and themes, and everything else you’d do with a normal WordPress site. Here’s the dashboard running from localhost. And here’s the default blog running. Setting up Visual Web Developer 2010 Express As mentioned before, Visual Web Developer 2010 Express didn’t install correctly on our first try, but the second time it installed seamlessly. Once it’s installed, launch it from your start menu as normal. It may take a few minutes to load on the first run as it is finishing up setup. You may notice that the splash screen displayed while the program is loading says For Evaluation Purposes Only. This is because you still need to register the program. You have 30 days to register the program, but let’s go ahead and do it to get this step out of the way. Click Help in the menu bar, and select Register Product. Click Obtain a registration key online in the popup window. You’ll need to sign in with your Windows Live ID, and then fill out a quick form. When you’re done, copy the registration key displayed and paste it into the registration dialog in Visual Web Developer. Now you’ve got a registered, free web development program with full standards compliance and IntelliSense to help you work smarter and faster. And it works great with your local web apps, so you can create, tweak, and then deploy, all from your desktop with this simple installer! Install More Apps You can always run the Web Platform Installer again in the future and add more apps if you’d like. The install adds a link to the Installer in the Start menu; just run it and repeat the steps above with your new selections. Also, from the installer, you can cleanup the setup files downloaded during the installation if you want. Click the Options link in the bottom of the window, and then scroll down and select Delete installer cache folder. Uninstalling the apps is not as easy, unfortunately. If you wish to uninstall the Web Platform Installer and everything you installed with it, you’ll need to uninstall each item individually. One easy way to see what was all installed together is to sort the entries in Uninstall Programs by date. In our case, we also installed some other applications on the same day, but it’s easier to see what was installed together. Or if you are not a fan of using Programs and Features to uninstall them, try out a program like Revo Uninstaller Pro. Conclusion Whether you’re a full-time web developer or just enjoy testing out the latest web apps, the Web Platform Installer makes it quick and easy to get your computer loaded up with the latest bits. In fact, it’s easier to install these tools with all their dependencies than it is to install many standard boxed programs. If you’d like to take your web server anywhere you go and not have it confined to your desktop, then check out our article on how to Turn Your Flashdrive into a Portable Webserver. Link Download the Microsoft Web Platform Installer Similar Articles Productive Geek Tips Linux QuickTip: Downloading and Un-tarring in One StepQuick Tip: Set a Future Date for a Post in WordPressHow-To Geek SoftwareAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogHow-To Geek Software: WordPress Comment Moderation Notifier TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

Read the article

Quick guide to Oracle IRM 11g: Server installation

- by Simon Thorpe

Quick guide to Oracle IRM 11g index This is the first of a set of articles designed to assist with the successful installation, configuration and deployment of a document security solution using Oracle IRM. This article goes through a set of simple instructions which detail how to download, install and configure the IRM server, the starting point for building a document security solution. This article contains a subset of information from the official documentation and is focused on installing the server on Oracle Enterprise Linux. If you are planning to deploy on a non-Linux platform, you will need to reference the documentation for platform specific information. Contents Introduction Downloading the software Preparing a database Creating the schema WebLogic Server installation Installing Oracle IRM Introduction Because we are using Oracle Enterprise Linux in this guide, and before we get into the detail of IRM, i'd like to share some tips with Linux to make life a bit easier.Use a 64bit platform, IRM 11g runs just fine on a 32bit server but with 64bit you will build a more future proof service. Download and install the latest Java JDK package. Make sure you get the 64bit version if you are on a 64bit server. Configure Linux to use a good Yum server to simplify installing packages. For Oracle Enterprise Linux we maintain a great public Yum here. Have at least 20GB of free disk space on the partition you intend to install the IRM server. The downloads are big, then you extract them and then install. This quickly consumes disk space which you can easily recover by deleting the downloaded and extracted files after wards. But it's nice to have the disk space spare to keep these around in case you need to restart any part of the installation process again. Downloading the software OK, so before you can do anything, you need the software install kits. Luckily Oracle allows you to freely download every technology we create. You'll need to get the following; Oracle WebLogic Server Oracle Database Oracle Repository Creation Utility (rcu) Oracle IRM server You can use Microsoft SQL server 2005 or 2008, in this guide i've used Oracle RDBMS 11gR2 for Linux. Preparing the database I'm not going to go through the finer points of installing the database. There are many very good guides on installing the Oracle Database. However one thing I would suggest you think about is enabling TDE, network encryption and using Database Vault. These Oracle database security technologies are excellent for creating a complete end to end security solution. No point in going to all the effort to secure document access with IRM when someone can go directly to the database and assign themselves rights to documents. To understand this further, you can see a video of the IRM service using these database security technologies here. With a database up and running we need to create a schema to hold the IRM data. This schema contains the rights model, cryptographic keys, user account id's and associated rights etc. Creating the IRM database schema Oracle uses the Repository Creation Tool which builds your schema, extract the files from the rcu zip. Then in a terminal window; cd /oracle/install/rcu/bin ./rcu This will launch the Repository Creation Tool and you will be presented with the image to the right. Hit next and continue onto the next dialog. You are asked if you are going to be creating a new schema or wish to drop an existing one, you obviously just need to click next at this point to create a new schema. The RCU next needs to know where your database is so you'll need the following details of your database instance. Below, for reference, is the information for my installation. Hostname: irm.oracle.demo Port: 1521 (This is the default TCP port for the Oracle Database) Service Name: irm.oracle.demo. Note this is not the SID, but the service name. Username: sys Password: ******** Role: SYSDBA And then select next. Because the RCU contains schemas for many of the Oracle Technologies, you now need to select to just deploy the Oracle IRM schema. Open the section under "Enterprise Content Management" and tick the "Oracle Information Rights Management" component. Note that you also get the chance to select a prefix which defaults to "DEV" (for development). I usually change this to something that reflects my own install. PROD for a production system, INT for internal only etc. The next step asks for the passwords for the schema users. We are only creating one schema here so you just enter one password. Some brave souls store this password in an Excel spreadsheet which is then secure against the IRM server you're about to install in this guide. Nearing the end of the schema creation is the mapping of the tablespaces to the schema. Note I had setup a table space already that was encrypted using TDE and at this point I was able to select that tablespace by clicking in the "Default Tablespace" column. The next dialog confirms your actions and clicking on next causes it to create the schema and default data. After this you are presented with the completion summary. WebLogic Server installation The database is now ready and the next step is to install the application server. Oracle IRM 11g is a JEE application and currently only supported in Oracle WebLogic Server. So the next step is get WebLogic Server installed, which is pretty easy. Depending on the version you download, you either run the binary or for a 64 bit platform (like mine) run the following command. java -d64 -jar wls1033_generic.jar And in the resulting dialog hit next to start walking through the install. Next choose a directory into which you will install WebLogic Server. I like to change from the default and install into /oracle/. Then all my software goes into this one folder, all owned by the "oracle" user. The next dialog asks for your Oracle support information to ensure you are kept up to date. If you have an Oracle support account, enter your details but for most evaluation systems I leave these fields blank. Again, for evaluation or development systems, I usually stick with the "Typical" install type which you are next asked for. Next you are asked for the JDK which will be used for the server. When installing from the generic jar on a 64bit platform like in this guide, no JDK is bundled with the installer. But as you can see in the image on the right, that it does a good job of detecting the one you've got installed. Defaults for the install directories are usually taken, no changes here, just click next. And finally we are ready to install, hit next, sit back and relax. Typically this takes about 10 minutes. After the install, do not run the quick start, we need to deploy the IRM install itself from which we will create a new WebLogic domain. For now just hit done and lets move to the final step of the installation process. Installing Oracle IRM The last piece of the puzzle to getting your environment ready is to deploy the IRM files themselves. Unzip the Oracle Enterprise Content Management 11g zip file and it will create a Disk1 directory. Switch to this folder and in the console run ./runInstaller. This will launch the installer which will also ask for the location of the JDK. Look at the image on the right for the detail. You should now see the first stage of the IRM installation. The dialog warns you need to have a WebLogic server installed and have created the schema's, but you've just done all that above (I hope) so we are ready to go. The installer now checks that you have all the required libraries installed and other system parameters are correct. Because nearly all of my development and evaluation installations have the database server on the same system, the installer passes these checks without issue... Next... Now chose where to install the IRM files, you must install into the same Middleware Home as the WebLogic Server installation you just performed. Usually the installer already defaults to this location anyway. I also tend to change the Oracle Home Directory to Oracle_IRM so it's clear this is just an IRM install. The summary page tells you about space needed to deploy the files. Unfortunately the IRM install comes with all of the other Oracle ECM software, you can't just select the IRM files, everything gets deployed to disk and uses 1.6GB of space! Not fun, but Oracle has to package up similar technologies otherwise we would have a very large number of installers to QA and manage, again, not fun. Hit Install, time for another drink, maybe a piece of cake or a donut... on a half decent system this part of the install took under 10 minutes. Finally the installation of your IRM server is complete, click on finish and the next phase is to create the WebLogic domain and start configuring your server. Now move onto the next article in this guide... configuring your IRM server ready to seal your first document.

Read the article

Silverlight Recruiting Application Part 6 - Adding an Interview Scheduling Module/View

Between the last post and this one I went ahead and carried the ideas for the Jobs module and view into the Applicants module and view- they're both doing more or less the same thing, except with different objects being at their core. Made for an easy cut-and-paste operation with a few items being switched from one to another. Now that we have the ability to add postings and applicants, wouldn't it be nice if we could schedule an interview? Of course it would! Scheduling Module I think you get the drift from previous posts that these project structures start looking somewhat similar. The interview scheduling module is no different than the rest- it gets a SchedulingModule.cs file at the root that inherits from IModule, and there is a single SchedulerView.xsml and SchedulerViewModel.cs setup for our V+VM. We have one unique concern as we enter into this- RadScheduler deals with AppointmentsSource, not ItemsSource, so there are some special considerations to take into account when planning this module. First, I need something which inherits from AppointmentBase. This is the core of the RadScheduler appointment, and if you are planning to do any form of custom appointment, you'll want it to inherit from this. Then you can add-on functionality as needed. Here is my addition to the mix, the InterviewAppointment: 01.public class InterviewAppointment : AppointmentBase 02.{ 03. private int _applicantID; 04. public int ApplicantID 05. { 06. get { return this._applicantID; } 07. set 08. { 09. if (_applicantID != value) 10. { 11. _applicantID = value; 12. OnPropertyChanged("ApplicantID"); 13. } 14. } 15. } 16. 17. private int _postingID; 18. public int PostingID 19. { 20. get { return _postingID; } 21. set 22. { 23. if (_postingID != value) 24. { 25. _postingID = value; 26. OnPropertyChanged("PostingID"); 27. } 28. } 29. } 30. 31. private string _body; 32. public string Body 33. { 34. get { return _body; } 35. set 36. { 37. if (_body != value) 38. { 39. _body = value; 40. OnPropertyChanged("Body"); 41. } 42. } 43. } 44. 45. private int _interviewID; 46. public int InterviewID 47. { 48. get { return _interviewID; } 49. set 50. { 51. if (_interviewID != value) 52. { 53. _interviewID = value; 54. OnPropertyChanged("InterviewID"); 55. } 56. } 57. } 58. 59. public override IAppointment Copy() 60. { 61. IAppointment appointment = new InterviewAppointment(); 62. appointment.CopyFrom(this); 63. return appointment; 64. } 65. 66. public override void CopyFrom(IAppointment other) 67. { 68. base.CopyFrom(other); 69. var appointment = other as InterviewAppointment; 70. if (appointment != null) 71. { 72. ApplicantID = appointment.ApplicantID; 73. PostingID = appointment.PostingID; 74. Body = appointment.Body; 75. InterviewID = appointment.InterviewID; 76. } 77. } 78.} Nothing too exciting going on here, we just make sure that our custom fields are persisted (specifically set in CopyFrom at the bottom) and notifications are fired- otherwise this ends up exactly like the standard appointment as far as interactions, etc. But if we've got custom appointment items... that also means we need to customize what our appointment dialog window will look like. Customizing the Edit Appointment Dialog This initially sounds a lot more intimidating than it really is. The first step here depends on what you're dealing with for theming, but for ease of everything I went ahead and extracted my templates in Blend for RadScheduler so I could modify it as I pleased. For the faint of heart, the RadScheduler template is a few thousand lines of goodness since there are some very complex things going on in that control. I've gone ahead and trimmed down the template parts I don't need as much as possible, so what is left is all that is relevant to the Edit Appointment Dialog. Here's the resulting Xaml, with line numbers, so I can explain further: 001.<UserControl.Resources> 002.  003. <helpers:DataContextProxy x:Key="DataContextProxy" /> 004. 005. <telerik:Windows7Theme x:Key="Theme" /> 006. <SolidColorBrush x:Key="DialogWindowBackground" 007. Color="White" /> 008. <SolidColorBrush x:Key="CategorySelectorBorderBrush" 009. Color="#FFB1B1B1" /> 010. <LinearGradientBrush x:Key="RadToolBar_InnerBackground" 011. EndPoint="0.5,1" 012. StartPoint="0.5,0"> 013. <GradientStop Color="#FFFDFEFF" 014. Offset="0" /> 015. <GradientStop Color="#FFDDE9F7" 016. Offset="1" /> 017. <GradientStop Color="#FFE6F0FA" 018. Offset="0.5" /> 019. <GradientStop Color="#FFDCE6F4" 020. Offset="0.5" /> 021. </LinearGradientBrush> 022. <Style x:Key="FormElementTextBlockStyle" 023. TargetType="TextBlock"> 024. <Setter Property="HorizontalAlignment" 025. Value="Right" /> 026. <Setter Property="VerticalAlignment" 027. Value="Top" /> 028. <Setter Property="Margin" 029. Value="15, 15, 0, 2" /> 030. </Style> 031. <Style x:Key="FormElementStyle" 032. TargetType="FrameworkElement"> 033. <Setter Property="Margin" 034. Value="10, 10, 0, 2" /> 035. </Style> 036. <SolidColorBrush x:Key="GenericShallowBorderBrush" 037. Color="#FF979994" /> 038. <telerik:BooleanToVisibilityConverter x:Key="BooleanToVisibilityConverter" /> 039. <telerikScheduler:ImportanceToBooleanConverter x:Key="ImportanceToBooleanConverter" /> 040. <telerikScheduler:NullToVisibilityConverter x:Key="NullToVisibilityConverter" /> 041. <telerikScheduler:InvertedNullToVisibilityConverter x:Key="InvertedNullToVisibilityConverter" /> 042. <scheduler:ResourcesSeparatorConverter x:Key="ResourcesSeparatorConverter" /> 043. <DataTemplate x:Key="IconDataEditTemplate"> 044. <Image Source="/Telerik.Windows.Controls.Scheduler;component/Themes/Office/Images/cal.png" 045. Margin="3,3,0,0" 046. Width="16" 047. Height="16" /> 048. </DataTemplate> 049. <DataTemplate x:Key="SingleSelectionTemplate"> 050. <Grid VerticalAlignment="Stretch" 051. HorizontalAlignment="Stretch"> 052. <Grid.RowDefinitions> 053. <RowDefinition Height="Auto" /> 054. </Grid.RowDefinitions> 055. <Grid.ColumnDefinitions> 056. <ColumnDefinition Width="Auto" 057. MinWidth="84" /> 058. <ColumnDefinition Width="Auto" 059. MinWidth="200" /> 060. </Grid.ColumnDefinitions> 061. <TextBlock x:Name="SelectionNameLabel" 062. Margin="0,13,4,2" 063. Text="{Binding ResourceType.DisplayName}" 064. Style="{StaticResource FormElementTextBlockStyle}" 065. Grid.Column="0" /> 066. <telerikInput:RadComboBox ItemsSource="{Binding ResourceItems}" 067. Width="185" 068. Margin="5,10,20,2" 069. HorizontalAlignment="Left" 070. Grid.Column="1" 071. ClearSelectionButtonVisibility="Visible" 072. ClearSelectionButtonContent="Clear All" 073. DisplayMemberPath="Resource.DisplayName" 074. telerik:StyleManager.Theme="{StaticResource Theme}" 075. SelectedItem="{Binding SelectedItem, Mode=TwoWay}" /> 076. </Grid> 077. </DataTemplate> 078. <DataTemplate x:Key="MultipleSelectionTemplate"> 079. <Grid VerticalAlignment="Stretch" 080. HorizontalAlignment="Stretch"> 081. <Grid.RowDefinitions> 082. <RowDefinition Height="Auto" /> 083. </Grid.RowDefinitions> 084. <Grid.ColumnDefinitions> 085. <ColumnDefinition Width="Auto" 086. MinWidth="84" /> 087. <ColumnDefinition Width="Auto" 088. MinWidth="200" /> 089. </Grid.ColumnDefinitions> 090. <TextBlock x:Name="SelectionNameLabel" 091. Grid.Column="0" 092. Text="{Binding ResourceType.DisplayName}" 093. Margin="0,13,4,2" 094. Style="{StaticResource FormElementTextBlockStyle}" /> 095. <telerikInput:RadComboBox Grid.Column="1" 096. Width="185" 097. HorizontalAlignment="Left" 098. Margin="5,10,20,2" 099. ItemsSource="{Binding ResourceItems}" 100. SelectedIndex="{Binding SelectedIndex, Mode=TwoWay}" 101. ClearSelectionButtonVisibility="Visible" 102. ClearSelectionButtonContent="Clear All" 103. telerik:StyleManager.Theme="{StaticResource Theme}"> 104. <telerikInput:RadComboBox.ItemTemplate> 105. <DataTemplate> 106. <Grid HorizontalAlignment="Stretch" 107. VerticalAlignment="Stretch"> 108. <CheckBox VerticalAlignment="Center" 109. HorizontalContentAlignment="Stretch" 110. VerticalContentAlignment="Center" 111. IsChecked="{Binding IsChecked, Mode=TwoWay}" 112. Content="{Binding Resource.DisplayName}"> 113. <CheckBox.ContentTemplate> 114. <DataTemplate> 115. <TextBlock HorizontalAlignment="Stretch" 116. VerticalAlignment="Stretch" 117. Text="{Binding Content, RelativeSource={RelativeSource TemplatedParent}}" /> 118. </DataTemplate> 119. </CheckBox.ContentTemplate> 120. </CheckBox> 121. </Grid> 122. </DataTemplate> 123. </telerikInput:RadComboBox.ItemTemplate> 124. </telerikInput:RadComboBox> 125. </Grid> 126. </DataTemplate> 127. <scheduler:ResourceTypeTemplateSelector x:Key="ItemTemplateSelector" 128. MultipleSelectionTemplate="{StaticResource MultipleSelectionTemplate}" 129. SingleSelectionTemplate="{StaticResource SingleSelectionTemplate}" /> 130.  131. 132. <ControlTemplate x:Key="EditAppointmentTemplate" 133. TargetType="telerikScheduler:AppointmentDialogWindow"> 134. <StackPanel Background="{TemplateBinding Background}" 135. UseLayoutRounding="True"> 136. <StackPanel Grid.Row="0" 137. Orientation="Horizontal" 138. Background="{StaticResource RadToolBar_InnerBackground}" 139. Grid.ColumnSpan="2" 140. Height="0"> 141.  142. <Border Margin="1,1,0,0" 143. Background="#50000000" 144. HorizontalAlignment="Left" 145. VerticalAlignment="Center" 146. Width="2" 147. Height="16"> 148. <Border Margin="0,0,1,1" 149. Background="#80FFFFFF" 150. HorizontalAlignment="Left" 151. Width="1" /> 152. </Border> 153. <Border Margin="1,1,0,0" 154. Background="#50000000" 155. HorizontalAlignment="Left" 156. VerticalAlignment="Center" 157. Width="2" 158. Height="16"> 159. <Border Margin="0,0,1,1" 160. Background="#80FFFFFF" 161. HorizontalAlignment="Left" 162. Width="1" /> 163. </Border> 164. <TextBlock telerik:LocalizationManager.ResourceKey="ShowAs" 165. VerticalAlignment="Center" 166. Margin="5,0,0,0" /> 167. <telerikInput:RadComboBox ItemsSource="{TemplateBinding TimeMarkers}" 168. Width="100" 169. Height="20" 170. VerticalAlignment="Center" 171. Margin="5,0,0,0" 172. ClearSelectionButtonVisibility="Visible" 173. ClearSelectionButtonContent="Clear" 174. SelectedItem="{Binding TimeMarker,RelativeSource={RelativeSource TemplatedParent},Mode=TwoWay}" 175. telerik:StyleManager.Theme="{StaticResource Theme}"> 176. <telerikInput:RadComboBox.ItemTemplate> 177. <DataTemplate> 178. <StackPanel Orientation="Horizontal"> 179. <Rectangle Fill="{Binding TimeMarkerBrush}" 180. Margin="2" 181. Width="12" 182. Height="12" /> 183. <TextBlock Text="{Binding TimeMarkerName}" 184. Margin="2" /> 185. </StackPanel> 186. </DataTemplate> 187. </telerikInput:RadComboBox.ItemTemplate> 188. </telerikInput:RadComboBox> 189. <telerik:RadToggleButton x:Name="High" 190. BorderThickness="0" 191. Background="{StaticResource RadToolBar_InnerBackground}" 192. DataContext="{TemplateBinding EditedAppointment}" 193. telerik:StyleManager.Theme="{StaticResource Theme}" 194. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=High}" 195. Margin="2,2,0,2" 196. Width="23" 197. Height="23" 198. HorizontalContentAlignment="Center" 199. ToolTipService.ToolTip="High importance" 200. CommandParameter="High" 201. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 202. <StackPanel HorizontalAlignment="Center"> 203. <Path Stretch="Fill" 204. Height="10" 205. HorizontalAlignment="Center" 206. VerticalAlignment="Top" 207. Width="5.451" 208. Data="M200.39647,58.840393 C200.39337,58.336426 201.14566,57.683922 202.56244,57.684292 C204.06589,57.684685 204.73764,58.357765 204.72783,58.992363 C205.04649,61.795574 203.04713,64.181099 202.47388,66.133446 C201.93753,64.154961 199.9471,61.560352 200.39647,58.840393 z"> 209. <Path.Fill> 210. <LinearGradientBrush EndPoint="1.059,0.375" 211. StartPoint="-0.457,0.519"> 212. <GradientStop Color="#FFFF0606" 213. Offset="0.609" /> 214. <GradientStop Color="#FFBF0303" 215. Offset="0.927" /> 216. </LinearGradientBrush> 217. </Path.Fill> 218. </Path> 219. <Ellipse Height="3" 220. HorizontalAlignment="Center" 221. Margin="0,-1,0,0" 222. VerticalAlignment="Top" 223. Width="3"> 224. <Ellipse.Fill> 225. <RadialGradientBrush> 226. <GradientStop Color="#FFFF0606" 227. Offset="0" /> 228. <GradientStop Color="#FFBF0303" 229. Offset="1" /> 230. </RadialGradientBrush> 231. </Ellipse.Fill> 232. </Ellipse> 233. </StackPanel> 234. </telerik:RadToggleButton> 235. <telerik:RadToggleButton x:Name="Low" 236. HorizontalContentAlignment="Center" 237. BorderThickness="0" 238. Background="{StaticResource RadToolBar_InnerBackground}" 239. DataContext="{TemplateBinding EditedAppointment}" 240. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=Low}" 241. Margin="0,2,0,2" 242. Width="23" 243. Height="23" 244. ToolTipService.ToolTip="Low importance" 245. CommandParameter="Low" 246. telerik:StyleManager.Theme="{StaticResource Theme}" 247. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 248. <Path Stretch="Fill" 249. Height="12" 250. HorizontalAlignment="Center" 251. VerticalAlignment="Top" 252. Width="9" 253. Data="M222.40353,60.139881 L226.65768,60.139843 L226.63687,67.240196 L229.15347,67.240196 L224.37816,71.394943 L219.65274,67.240196 L222.37572,67.219345 z" 254. Stroke="#FF0365A7"> 255. <Path.Fill> 256. <LinearGradientBrush EndPoint="1.059,0.375" 257. StartPoint="-0.457,0.519"> 258. <GradientStop Color="#FFBBE4FF" /> 259. <GradientStop Color="#FF024572" 260. Offset="0.836" /> 261. <GradientStop Color="#FF43ADF4" 262. Offset="0.466" /> 263. </LinearGradientBrush> 264. </Path.Fill> 265. </Path> 266. </telerik:RadToggleButton> 267. </StackPanel > 268. <Border DataContext="{TemplateBinding EditedAppointment}" 269. Background="{Binding Category.CategoryBrush}" 270. Visibility="{Binding Category,Converter={StaticResource NullToVisibilityConverter}}" 271. CornerRadius="3" 272. Height="20" 273. Margin="5,10,5,0"> 274. <TextBlock Text="{Binding Category.DisplayName}" 275. VerticalAlignment="Center" 276. Margin="5,0,0,0" /> 277. </Border> 278. <Grid VerticalAlignment="Stretch" 279. HorizontalAlignment="Stretch" 280. DataContext="{TemplateBinding EditedAppointment}" 281. Background="{TemplateBinding Background}"> 282. <Grid.RowDefinitions> 283. <RowDefinition Height="Auto" /> 284. <RowDefinition Height="Auto" /> 285. <RowDefinition Height="Auto" /> 286. <RowDefinition Height="Auto" /> 287. <RowDefinition Height="Auto" /> 288. <RowDefinition Height="Auto" /> 289. <RowDefinition Height="Auto" /> 290. <RowDefinition Height="Auto" /> 291. <RowDefinition Height="Auto" /> 292. <RowDefinition Height="Auto" /> 293. </Grid.RowDefinitions> 294. <Grid.ColumnDefinitions> 295. <ColumnDefinition Width="Auto" 296. MinWidth="100" /> 297. <ColumnDefinition Width="Auto" 298. MinWidth="200" /> 299. </Grid.ColumnDefinitions> 300.  301. <TextBlock x:Name="SubjectLabel" 302. Grid.Row="0" 303. Grid.Column="0" 304. Margin="0,15,0,2" 305. telerik:LocalizationManager.ResourceKey="Subject" 306. Style="{StaticResource FormElementTextBlockStyle}" /> 307. <TextBox x:Name="Subject" 308. Grid.Row="0" 309. Grid.Column="1" 310. MinHeight="22" 311. Padding="4 2" 312. Width="340" 313. HorizontalAlignment="Left" 314. Text="{Binding Subject, Mode=TwoWay}" 315. MaxLength="255" 316. telerik:StyleManager.Theme="{StaticResource Theme}" 317. Margin="10,12,20,2" /> 318.  319. <TextBlock x:Name="DescriptionLabel" 320. Grid.Row="1" 321. Grid.Column="0" 322. Margin="0,13,0,2" 323. telerik:LocalizationManager.ResourceKey="Body" 324. Style="{StaticResource FormElementTextBlockStyle}" /> 325. <TextBox x:Name="Body" 326. VerticalAlignment="top" 327. Grid.Row="1" 328. Grid.Column="1" 329. Height="Auto" 330. MaxHeight="82" 331. Width="340" 332. HorizontalAlignment="Left" 333. MinHeight="22" 334. Padding="4 2" 335. TextWrapping="Wrap" 336. telerik:StyleManager.Theme="{StaticResource Theme}" 337. Text="{Binding Body, Mode=TwoWay}" 338. AcceptsReturn="true" 339. Margin="10,10,20,2" 340. HorizontalScrollBarVisibility="Auto" 341. VerticalScrollBarVisibility="Auto" /> 342.  343. <TextBlock x:Name="StartDateLabel" 344. Grid.Row="2" 345. Grid.Column="0" 346. Margin="0,13,0,2" 347. telerik:LocalizationManager.ResourceKey="StartTime" 348. Style="{StaticResource FormElementTextBlockStyle}" /> 349. <telerikScheduler:DateTimePicker x:Name="StartDateTime" 350. Height="22" 351. Grid.Row="2" 352. Grid.Column="1" 353. HorizontalAlignment="Left" 354. Margin="10,10,20,2" 355. Style="{StaticResource FormElementStyle}" 356. SelectedDateTime="{Binding Start, Mode=TwoWay}" 357. telerikScheduler:StartEndDatePicker.EndPicker="{Binding ElementName=EndDateTime}" 358. IsTabStop="False" 359. IsEnabled="False" /> 360. <TextBlock x:Name="EndDateLabel" 361. Grid.Row="3" 362. Grid.Column="0" 363. Margin="0,13,0,2" 364. telerik:LocalizationManager.ResourceKey="EndTime" 365. Style="{StaticResource FormElementTextBlockStyle}" /> 366. <telerikScheduler:DateTimePicker x:Name="EndDateTime" 367. Height="22" 368. Grid.Row="3" 369. Grid.Column="1" 370. HorizontalAlignment="Left" 371. Margin="10,10,20,2" 372. Style="{StaticResource FormElementStyle}" 373. IsTabStop="False" 374. IsEnabled="False" 375. SelectedDateTime="{Binding End, Mode=TwoWay}" /> 376.  377. <CheckBox x:Name="AllDayEventCheckbox" 378. IsChecked="{Binding IsAllDayEvent, Mode=TwoWay}" 379. Grid.Row="4" 380. Grid.Column="1" 381. Margin="10,10,20,2" 382. HorizontalAlignment="Left" 383. telerik:StyleManager.Theme="{StaticResource Theme}" 384. telerik:LocalizationManager.ResourceKey="AllDayEvent"> 385. <telerik:CommandManager.InputBindings> 386. <telerik:InputBindingCollection> 387. <telerik:MouseBinding Command="telerikScheduler:RadSchedulerCommands.ChangeTimePickersVisibility" 388. Gesture="LeftClick" /> 389. </telerik:InputBindingCollection> 390. </telerik:CommandManager.InputBindings> 391. </CheckBox> 392. <Grid Grid.Row="5" 393. Grid.ColumnSpan="2"> 394. <Grid.ColumnDefinitions> 395. <ColumnDefinition Width="Auto" 396. MinWidth="100" /> 397. <ColumnDefinition Width="Auto" 398. MinWidth="200" /> 399. </Grid.ColumnDefinitions> 400. <Grid.RowDefinitions> 401. <RowDefinition Height="Auto" /> 402. <RowDefinition Height="Auto" /> 403. </Grid.RowDefinitions> 404. <TextBlock Text="Applicant" 405. Margin="0,13,0,2" 406. Style="{StaticResource FormElementTextBlockStyle}" /> 407. <telerikInput:RadComboBox IsEditable="False" 408. Grid.Column="1" 409. Height="24" 410. VerticalAlignment="Center" 411. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.ApplicantList}" 412. SelectedValue="{Binding ApplicantID, Mode=TwoWay}" 413. SelectedValuePath="ApplicantID" 414. DisplayMemberPath="FirstName" /> 415. 416. <TextBlock Text="Job" 417. Margin="0,13,0,2" 418. Grid.Row="1" 419. Style="{StaticResource FormElementTextBlockStyle}" /> 420. <telerikInput:RadComboBox IsEditable="False" 421. Grid.Column="1" 422. Grid.Row="1" 423. Height="24" 424. VerticalAlignment="Center" 425. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.JobsList}" 426. SelectedValue="{Binding PostingID, Mode=TwoWay}" 427. SelectedValuePath="PostingID" 428. DisplayMemberPath="JobTitle"/> 429. </Grid> 430.  431. <Grid x:Name="ResourcesLayout" 432. Grid.Row="7" 433. Grid.Column="0" 434. Grid.ColumnSpan="2" 435. MaxHeight="130" 436. Margin="20,5,20,0"> 437. <Border Margin="0" 438. BorderThickness="1" 439. BorderBrush="{StaticResource GenericShallowBorderBrush}" 440. Visibility="{Binding ElementName=ResourcesScrollViewer, Path=ComputedVerticalScrollBarVisibility}"></Border> 441. <ScrollViewer x:Name="ResourcesScrollViewer" 442. IsTabStop="false" 443. Grid.Row="6" 444. Grid.Column="0" 445. Grid.ColumnSpan="2" 446. Margin="1" 447. telerik:StyleManager.Theme="{StaticResource Theme}" 448. VerticalScrollBarVisibility="Auto"> 449. <scheduler:ResourcesItemsControl x:Name="PART_Resources" 450. HorizontalAlignment="Left" 451. Padding="0,2,0,5" 452. IsTabStop="false" 453. ItemsSource="{TemplateBinding ResourceTypeModels}" 454. ItemTemplateSelector="{StaticResource ItemTemplateSelector}" /> 455. </ScrollViewer> 456. </Grid> 457. <StackPanel x:Name="FooterControls" 458. Margin="5 10 10 10" 459. Grid.Row="8" 460. Grid.Column="1" 461. HorizontalAlignment="Left" 462. Orientation="Horizontal"> 463. <telerik:RadButton x:Name="OKButton" 464. Margin="5" 465. Padding="10 0" 466. MinWidth="80" 467. Command="telerikScheduler:RadSchedulerCommands.SaveAppointment" 468. telerik:StyleManager.Theme="{StaticResource Theme}" 469. telerikNavigation:RadWindow.ResponseButton="Accept" 470. telerik:LocalizationManager.ResourceKey="SaveAndCloseCommandText"> 471. </telerik:RadButton> 472. <telerik:RadButton x:Name="CancelButton" 473. Margin="5" 474. Padding="10 0" 475. MinWidth="80" 476. telerik:LocalizationManager.ResourceKey="Cancel" 477. telerik:StyleManager.Theme="{StaticResource Theme}" 478. telerikNavigation:RadWindow.ResponseButton="Cancel" 479. Command="telerik:WindowCommands.Close"> 480. </telerik:RadButton> 481. </StackPanel> 482. </Grid> 483. <vsm:VisualStateManager.VisualStateGroups> 484. <vsm:VisualStateGroup x:Name="RecurrenceRuleState"> 485. <vsm:VisualState x:Name="RecurrenceRuleIsNull"> 486. <Storyboard> 487. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 488. Storyboard.TargetProperty="IsEnabled" 489. Duration="0"> 490. <DiscreteObjectKeyFrame KeyTime="0" 491. Value="True" /> 492. </ObjectAnimationUsingKeyFrames> 493. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 494. Storyboard.TargetProperty="IsEnabled" 495. Duration="0"> 496. <DiscreteObjectKeyFrame KeyTime="0" 497. Value="True" /> 498. </ObjectAnimationUsingKeyFrames> 499. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 500. Storyboard.TargetProperty="IsEnabled" 501. Duration="0"> 502. <DiscreteObjectKeyFrame KeyTime="0" 503. Value="True" /> 504. </ObjectAnimationUsingKeyFrames> 505. </Storyboard> 506. </vsm:VisualState> 507. <vsm:VisualState x:Name="RecurrenceRuleIsNotNull"> 508. <Storyboard> 509. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 510. Storyboard.TargetProperty="IsEnabled" 511. Duration="0"> 512. <DiscreteObjectKeyFrame KeyTime="0" 513. Value="False" /> 514. </ObjectAnimationUsingKeyFrames> 515. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 516. Storyboard.TargetProperty="IsEnabled" 517. Duration="0"> 518. <DiscreteObjectKeyFrame KeyTime="0" 519. Value="False" /> 520. </ObjectAnimationUsingKeyFrames> 521. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 522. Storyboard.TargetProperty="IsEnabled" 523. Duration="0"> 524. <DiscreteObjectKeyFrame KeyTime="0" 525. Value="False" /> 526. </ObjectAnimationUsingKeyFrames> 527. </Storyboard> 528. </vsm:VisualState> 529. </vsm:VisualStateGroup> 530. </vsm:VisualStateManager.VisualStateGroups> 531. </StackPanel> 532. </ControlTemplate> 533. <DataTemplate x:Key="AppointmentDialogWindowHeaderDataTemplate"> 534. <StackPanel Orientation="Horizontal" 535. MaxWidth="400"> 536. <TextBlock telerik:LocalizationManager.ResourceKey="Event" 537. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource BooleanToVisibilityConverter}}" /> 538. <TextBlock telerik:LocalizationManager.ResourceKey="Appointment" 539. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource InvertedBooleanToVisibilityConverter}}" /> 540. <TextBlock Text=" - " /> 541. <TextBlock x:Name="SubjectTextBlock" 542. Visibility="{Binding Appointment.Subject, Converter={StaticResource NullToVisibilityConverter}}" 543. Text="{Binding Appointment.Subject}" /> 544. <TextBlock telerik:LocalizationManager.ResourceKey="Untitled" 545. Visibility="{Binding Appointment.Subject, Converter={StaticResource InvertedNullToVisibilityConverter}}" /> 546. </StackPanel> 547. </DataTemplate> 548. <Style x:Key="EditAppointmentStyle" 549. TargetType="telerikScheduler:AppointmentDialogWindow"> 550. <Setter Property="IconTemplate" 551. Value="{StaticResource IconDataEditTemplate}" /> 552. <Setter Property="HeaderTemplate" 553. Value="{StaticResource AppointmentDialogWindowHeaderDataTemplate}" /> 554. <Setter Property="Background" 555. Value="{StaticResource DialogWindowBackground}" /> 556. <Setter Property="Template" 557. Value="{StaticResource EditAppointmentTemplate}" /> 558. </Style> 559.</UserControl.Resources> The first line there is the DataContextProxy I mentioned previously- we use that again to work a bit of magic in this template. Where we start getting into the dialog in question is line 132, but line 407 is where things start getting interesting. The ItemsSource is pointing at a list that exists in my ViewModel (or code-behind, if it is used as a DataContext), the SelectedValue is the item I am actually binding from the applicant (note the TwoWay binding), and SelectedValuePath and DisplayMemberPath ensure the proper applicant is being displayed from the collection. You will also see similar starting on line 420 where I do the same for the Jobs we'll be displaying. Just to wrap-up the Xaml, here's the RadScheduler declaraction that ties this all together and will be the main focus of our view: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. AppointmentsSource="{Binding Interviews}" 09. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 10. command:AppointmentAddedEventClass.Command="{Binding AddAppointmentCommand}" 11. command:ApptCreatedEventClass.Command="{Binding ApptCreatingCommand}" 12. command:ApptEditedEventClass.Command="{Binding ApptEditedCommand}" 13. command:ApptDeletedEventClass.Command="{Binding ApptDeletedCommand}"> 14.</telerikScheduler:RadScheduler> Now, we get to the ViewModel and what it takes to get that rigged up. And for those of you who remember the jobs post, those command:s in the Xaml are pointing to attached behavior commands that reproduce the respective events. This becomes very handy when we're setting up the code-behind version. ;) ViewModel I've been liking this approach so far, so I'm going to put the entire ViewModel here and then go into the lines of interest. Of course, feel free to ask me questions about anything that isn't clear (by line number, ideally) so I can help out if I have missed anything important: 001.public class SchedulerViewModel : ViewModelBase 002.{ 003. private readonly IEventAggregator eventAggregator; 004. private readonly IRegionManager regionManager; 005. 006. public RecruitingContext context; 007. 008. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 009. public ObservableItemCollection<InterviewAppointment> Interviews 010. { 011. get { return _interviews; } 012. set 013. { 014. if (_interviews != value) 015. { 016. _interviews = value; 017. NotifyChanged("Interviews"); 018. } 019. } 020. } 021. 022. private QueryableCollectionView _jobsList; 023. public QueryableCollectionView JobsList 024. { 025. get { return this._jobsList; } 026. set 027. { 028. if (this._jobsList != value) 029. { 030. this._jobsList = value; 031. this.NotifyChanged("JobsList"); 032. } 033. } 034. } 035. 036. private QueryableCollectionView _applicantList; 037. public QueryableCollectionView ApplicantList 038. { 039. get { return _applicantList; } 040. set 041. { 042. if (_applicantList != value) 043. { 044. _applicantList = value; 045. NotifyChanged("ApplicantList"); 046. } 047. } 048. } 049. 050. public DelegateCommand<object> AddAppointmentCommand { get; set; } 051. public DelegateCommand<object> ApptCreatingCommand { get; set; } 052. public DelegateCommand<object> ApptEditedCommand { get; set; } 053. public DelegateCommand<object> ApptDeletedCommand { get; set; } 054. 055. public SchedulerViewModel(IEventAggregator eventAgg, IRegionManager regionmanager) 056. { 057. // set Unity items 058. this.eventAggregator = eventAgg; 059. this.regionManager = regionmanager; 060. 061. // load our context 062. context = new RecruitingContext(); 063. LoadOperation<Interview> loadOp = context.Load(context.GetInterviewsQuery()); 064. loadOp.Completed += new EventHandler(loadOp_Completed); 065. 066. this._jobsList = new QueryableCollectionView(context.JobPostings); 067. context.Load(context.GetJobPostingsQuery()); 068. 069. this._applicantList = new QueryableCollectionView(context.Applicants); 070. context.Load(context.GetApplicantsQuery()); 071. 072. AddAppointmentCommand = new DelegateCommand<object>(this.AddAppt); 073. ApptCreatingCommand = new DelegateCommand<object>(this.ApptCreating); 074. ApptEditedCommand = new DelegateCommand<object>(this.ApptEdited); 075. ApptDeletedCommand = new DelegateCommand<object>(this.ApptDeleted); 076. 077. } 078. 079. void loadOp_Completed(object sender, EventArgs e) 080. { 081. LoadOperation loadop = sender as LoadOperation; 082. 083. foreach (var ent in loadop.Entities) 084. { 085. _interviews.Add(EntityToAppointment(ent as Interview)); 086. } 087. } 088. 089. #region Appointment Adding 090. 091. public void AddAppt(object obj) 092. { 093. // now we have a new InterviewAppointment to add to our QCV :) 094. InterviewAppointment newInterview = obj as InterviewAppointment; 095. 096. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 097. this.context.SubmitChanges((s) => 098. { 099. ActionHistory myAction = new ActionHistory(); 100. myAction.InterviewID = newInterview.InterviewID; 101. myAction.PostingID = newInterview.PostingID; 102. myAction.ApplicantID = newInterview.ApplicantID; 103. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 104. myAction.TimeStamp = DateTime.Now; 105. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 106. } 107. , null); 108. } 109. 110. public void ApptCreating(object obj) 111. { 112. // handled in the behavior, just a placeholder to ensure it runs :) 113. } 114. 115. #endregion 116. 117. #region Appointment Editing 118. 119. public void ApptEdited(object obj) 120. { 121. Interview editedInterview = (from x in context.Interviews 122. where x.InterviewID == (obj as InterviewAppointment).InterviewID 123. select x).SingleOrDefault(); 124. 125. CopyAppointmentEdit(editedInterview, obj as InterviewAppointment); 126. 127. context.SubmitChanges((s) => { 128. ActionHistory myAction = new ActionHistory(); 129. myAction.InterviewID = editedInterview.InterviewID; 130. myAction.PostingID = editedInterview.PostingID; 131. myAction.ApplicantID = editedInterview.ApplicantID; 132. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 133. myAction.TimeStamp = DateTime.Now; 134. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); } 135. , null); 136. } 137. 138. #endregion 139. 140. #region Appointment Deleting 141. 142. public void ApptDeleted(object obj) 143. { 144. Interview deletedInterview = (from x in context.Interviews 145. where x.InterviewID == (obj as InterviewAppointment).InterviewID 146. select x).SingleOrDefault(); 147. 148. context.Interviews.Remove(deletedInterview); 149. context.SubmitChanges((s) => 150. { 151. ActionHistory myAction = new ActionHistory(); 152. myAction.InterviewID = deletedInterview.InterviewID; 153. myAction.PostingID = deletedInterview.PostingID; 154. myAction.ApplicantID = deletedInterview.ApplicantID; 155. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 156. myAction.TimeStamp = DateTime.Now; 157. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 158. } 159. , null); 160. } 161. 162. #endregion 163. 164. #region Appointment Helpers :) 165. 166. public Interview AppointmentToEntity(InterviewAppointment ia) 167. { 168. Interview newInterview = new Interview(); 169. newInterview.Subject = ia.Subject; 170. newInterview.Body = ia.Body; 171. newInterview.Start = ia.Start; 172. newInterview.End = ia.End; 173. newInterview.ApplicantID = ia.ApplicantID; 174. newInterview.PostingID = ia.PostingID; 175. newInterview.InterviewID = ia.InterviewID; 176. 177. return newInterview; 178. } 179. 180. public InterviewAppointment EntityToAppointment(Interview ia) 181. { 182. InterviewAppointment newInterview = new InterviewAppointment(); 183. newInterview.Subject = ia.Subject; 184. newInterview.Body = ia.Body; 185. newInterview.Start = ia.Start; 186. newInterview.End = ia.End; 187. newInterview.ApplicantID = ia.ApplicantID; 188. newInterview.PostingID = ia.PostingID; 189. newInterview.InterviewID = ia.InterviewID; 190. 191. return newInterview; 192. } 193. 194. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 195. { 196. entityInterview.Subject = appointmentInterview.Subject; 197. entityInterview.Body = appointmentInterview.Body; 198. entityInterview.Start = appointmentInterview.Start; 199. entityInterview.End = appointmentInterview.End; 200. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 201. entityInterview.PostingID = appointmentInterview.PostingID; 202. } 203. 204. #endregion 205.} One thing we're doing here which you won't see in any of the other ViewModels is creating a duplicate collection. I know this is something which will be fixed down the line for using RadScheduler, simplifying this process, but with WCF RIA changing as it does I wanted to ensure functionality would remain consistent as I continued development on this application. So, I do a little bit of duplication, but for the greater good. This all takes place starting on line 79, so for every entity that comes back we add it to the collection that is bound to RadScheduler. Otherwise, the DelegateCommands that you see correspond directly to the events they are named after. In each case, rather than sending over the full event arguments, I just send in the appointment in question (coming through as the object obj in all cases) so I can add (line 91), edit (line 119), and delete appointments (line 142) like normal. This just ensures they get updated back to my database. Also, the one bit of code you won't see is for the Appointment Creating (line 110) event- that is because in the command I've created I simply make the replacement I need to: 1.void element_AppointmentCreating(object sender, AppointmentCreatingEventArgs e) 2.{ 3. e.NewAppointment = new InterviewAppointment(); 4. base.ExecuteCommand(); 5.} And the ViewModel is none the wiser, the appointments just work as far as it is concerned since as they are created they become InterviewAppointments. End result? I've customized my EditAppointmentDialog as follows: And adding, editing, and deleting appointments works like a charm. I can even 'edit' by moving appointments around RadScheduler, so as they are dropped into a timeslot they perform their full edit routine and things get updated. And then, the Code-Behind Version Perhaps the thing I like the most about doing one then the other is I get to steal 90% or more of the code from the MVVM version. For example, the only real changes to the Code-Behind Xaml file exist in the control declaration, in which I use events instead of attached-behavior-event-commands: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 09. AppointmentAdded="xJobsScheduler_AppointmentAdded" 10. AppointmentCreating="xJobsScheduler_AppointmentCreating" 11. AppointmentEdited="xJobsScheduler_AppointmentEdited" 12. AppointmentDeleted="xJobsScheduler_AppointmentDeleted"> 13.</telerikScheduler:RadScheduler> Easy, right? Otherwise, all the same styling in UserControl.Resources was re-used, right down to the DataContextProxy that lets us bind to a collection from our viewmodel (in this case, our code-behind) to use within the DataTemplate. The code conversion gets even easier, as I could literally copy and paste almost everything from the ViewModel to my Code-Behind, just a matter of pasting the right section into the right event. Here's the code-behind as proof: 001.public partial class SchedulingView : UserControl, INotifyPropertyChanged 002.{ 003. public RecruitingContext context; 004. 005. private QueryableCollectionView _jobsList; 006. public QueryableCollectionView JobsList 007. { 008. get { return this._jobsList; } 009. set 010. { 011. if (this._jobsList != value) 012. { 013. this._jobsList = value; 014. this.NotifyChanged("JobsList"); 015. } 016. } 017. } 018. 019. private QueryableCollectionView _applicantList; 020. public QueryableCollectionView ApplicantList 021. { 022. get { return _applicantList; } 023. set 024. { 025. if (_applicantList != value) 026. { 027. _applicantList = value; 028. NotifyChanged("ApplicantList"); 029. } 030. } 031. } 032. 033. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 034. public ObservableItemCollection<InterviewAppointment> Interviews 035. { 036. get { return _interviews; } 037. set 038. { 039. if (_interviews != value) 040. { 041. _interviews = value; 042. NotifyChanged("Interviews"); 043. } 044. } 045. } 046. 047. public SchedulingView() 048. { 049. InitializeComponent(); 050. 051. this.DataContext = this; 052. 053. this.Loaded += new RoutedEventHandler(SchedulingView_Loaded); 054. } 055. 056. void SchedulingView_Loaded(object sender, RoutedEventArgs e) 057. { 058. this.xJobsScheduler.AppointmentsSource = Interviews; 059. 060. context = new RecruitingContext(); 061. 062. LoadOperation loadop = context.Load(context.GetInterviewsQuery()); 063. loadop.Completed += new EventHandler(loadop_Completed); 064. 065. this._applicantList = new QueryableCollectionView(context.Applicants); 066. context.Load(context.GetApplicantsQuery()); 067. 068. this._jobsList = new QueryableCollectionView(context.JobPostings); 069. context.Load(context.GetJobPostingsQuery()); 070. } 071. 072. void loadop_Completed(object sender, EventArgs e) 073. { 074. LoadOperation loadop = sender as LoadOperation; 075. 076. _interviews.Clear(); 077. 078. foreach (var ent in loadop.Entities) 079. { 080. _interviews.Add(EntityToAppointment(ent as Interview)); 081. } 082. } 083. 084. private void xJobsScheduler_AppointmentAdded(object sender, Telerik.Windows.Controls.AppointmentAddedEventArgs e) 085. { 086. // now we have a new InterviewAppointment to add to our QCV :) 087. InterviewAppointment newInterview = e.Appointment as InterviewAppointment; 088. 089. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 090. this.context.SubmitChanges((s) => 091. { 092. ActionHistory myAction = new ActionHistory(); 093. myAction.InterviewID = newInterview.InterviewID; 094. myAction.PostingID = newInterview.PostingID; 095. myAction.ApplicantID = newInterview.ApplicantID; 096. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 097. myAction.TimeStamp = DateTime.Now; 098. context.ActionHistories.Add(myAction); 099. context.SubmitChanges(); 100. } 101. , null); 102. } 103. 104. private void xJobsScheduler_AppointmentCreating(object sender, Telerik.Windows.Controls.AppointmentCreatingEventArgs e) 105. { 106. e.NewAppointment = new InterviewAppointment(); 107. } 108. 109. private void xJobsScheduler_AppointmentEdited(object sender, Telerik.Windows.Controls.AppointmentEditedEventArgs e) 110. { 111. Interview editedInterview = (from x in context.Interviews 112. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 113. select x).SingleOrDefault(); 114. 115. CopyAppointmentEdit(editedInterview, e.Appointment as InterviewAppointment); 116. 117. context.SubmitChanges((s) => 118. { 119. ActionHistory myAction = new ActionHistory(); 120. myAction.InterviewID = editedInterview.InterviewID; 121. myAction.PostingID = editedInterview.PostingID; 122. myAction.ApplicantID = editedInterview.ApplicantID; 123. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 124. myAction.TimeStamp = DateTime.Now; 125. context.ActionHistories.Add(myAction); 126. context.SubmitChanges(); 127. } 128. , null); 129. } 130. 131. private void xJobsScheduler_AppointmentDeleted(object sender, Telerik.Windows.Controls.AppointmentDeletedEventArgs e) 132. { 133. Interview deletedInterview = (from x in context.Interviews 134. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 135. select x).SingleOrDefault(); 136. 137. context.Interviews.Remove(deletedInterview); 138. context.SubmitChanges((s) => 139. { 140. ActionHistory myAction = new ActionHistory(); 141. myAction.InterviewID = deletedInterview.InterviewID; 142. myAction.PostingID = deletedInterview.PostingID; 143. myAction.ApplicantID = deletedInterview.ApplicantID; 144. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 145. myAction.TimeStamp = DateTime.Now; 146. context.ActionHistories.Add(myAction); 147. context.SubmitChanges(); 148. } 149. , null); 150. } 151. 152. #region Appointment Helpers :) 153. 154. public Interview AppointmentToEntity(InterviewAppointment ia) 155. { 156. Interview newInterview = new Interview(); 157. newInterview.Subject = ia.Subject; 158. newInterview.Body = ia.Body; 159. newInterview.Start = ia.Start; 160. newInterview.End = ia.End; 161. newInterview.ApplicantID = ia.ApplicantID; 162. newInterview.PostingID = ia.PostingID; 163. newInterview.InterviewID = ia.InterviewID; 164. 165. return newInterview; 166. } 167. 168. public InterviewAppointment EntityToAppointment(Interview ia) 169. { 170. InterviewAppointment newInterview = new InterviewAppointment(); 171. newInterview.Subject = ia.Subject; 172. newInterview.Body = ia.Body; 173. newInterview.Start = ia.Start; 174. newInterview.End = ia.End; 175. newInterview.ApplicantID = ia.ApplicantID; 176. newInterview.PostingID = ia.PostingID; 177. newInterview.InterviewID = ia.InterviewID; 178. 179. return newInterview; 180. } 181. 182. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 183. { 184. entityInterview.Subject = appointmentInterview.Subject; 185. entityInterview.Body = appointmentInterview.Body; 186. entityInterview.Start = appointmentInterview.Start; 187. entityInterview.End = appointmentInterview.End; 188. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 189. entityInterview.PostingID = appointmentInterview.PostingID; 190. } 191. 192. #endregion 193. 194. #region INotifyPropertyChanged Members 195. 196. public event PropertyChangedEventHandler PropertyChanged; 197. 198. public void NotifyChanged(string propertyName) 199. { 200. if (string.IsNullOrEmpty(propertyName)) 201. throw new ArgumentException("propertyName"); 202. 203. PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); 204. } 205. 206. #endregion 207.} Nice... right? :) One really important thing to note as well. See on line 51 where I set the DataContext before the Loaded event? This is super important, as if you don't have this set before the usercontrol is loaded, the DataContextProxy has no context to use and your EditAppointmentDialog Job/Applicant dropdowns will be blank and empty. Trust me on this, took a little bit of debugging to figure out that by setting the DataContext post-loaded would only lead to disaster and frustration. Otherwise, the only other real difference is that instead of sending an ActionHistory item through an event to get added to the database and saved, I do those right in the callback from submitting. The Result Again, I only have to post one picture because these bad boys used nearly identical code for both the MVVM and the code-behind views, so our end result is... So what have we learned here today? One, for the most part this MVVM thing is somewhat easy. Yeah, you sometimes have to write a bunch of extra code, but with the help of a few useful snippits you can turn the process into a pretty streamlined little workflow. Heck, this story gets even easier as you can see in this blog post by Michael Washington- specifically run a find on 'InvokeCommandAction' and you'll see the section regarding the command on TreeView in Blend 4. Brilliant! MVVM never looked so sweet! Otherwise, it is business as usual with RadScheduler for Silverlight whichever path you're choosing for your development. Between now and the next post, I'll be cleaning up styles a bit (those RadComboBoxes are a little too close to my labels!) and adding some to the RowDetailsViews for Applicants and Jobs, so you can see all the info for an appointment in the dropdown tab view. Otherwise, we're about ready to call a wrap on this oneDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

CodePlex Daily Summary for Monday, April 26, 2010

CodePlex Daily Summary for Monday, April 26, 2010New Projects.Net 4.0 WPF Twitter Client: A .Net 4.0 Twitter client application built in WPF using PrismAop 权限管理 license授权: 授权管理 Aop应用asp.mvc example with ajax: asp.mvc example with ajaxBojinx: Flex 4 Framework and Management utilities IOC Container Flexible and powerful event management and handling Create your own Processors and Annotat...Browser Gallese: Il Browser Gallese serve per andare in internet quasi SICURO e GratiseaaCaletti: 2. Semester project @ ÅrhusEnki Char 2 BIN: A program that converts characters to binary and vice versaFsGame: A wrapper over xna to improve its usage from F#jouba Images Converter: Convert piles of images to all key formats at one go! Make quick adjustments - resize, rotate. Get your pictures ready to be printed or uploaded to...MVC2 RESTful Library: A RESTFul Library using ASP.NET MVC 2.0My Schedule Tool: Schedule can be used to create simple or complex schedules for executing tens. NAntDefineTasks: NAnt Define Tasks allows you to define NAnt tasks in terms of other NAnt tasks, instead of having to write any C# code. PowerShell Admin Modules: PAM supplies a number of PowerShell modules satisfying the needs of Windows administrators. By pulling together functions for adminsitering files a...Search Youtube Direct: Another project By URPROB This is a sample application that take search videos from youtube. The videos are shown with different attributes catagor...Simple Site Template: Simple Site Template 一个为了方便网站项目框架模板~Slaff's demo project: this is my demo projectSSIS Credit Card Number Validator 08 (CCNV08): Credit Card Number Validator 08 (CCNV08) is a Custom SSIS Data Flow Transformation Component for SQL Server 2008 that determines whether the given ...Su-Lekhan: Su-Lekhan is lite weight source code editor with refactoring support which is extensible to multiple languagesV-Data: V-Data es una herramienta de calidad de datos (Data Quality) que mejora considerablemente la calidad de la información disponible en cualquier sist...zy26: zy26 was here...New ReleasesActive Directory User Properties Change: Source Code v 1.0: Full Source Code + Database Creation SQL Script You need to change some values in web.config and DataAccess.vb. Hope you will get the most benefit!!Bojinx: Bojinx Core V4.5: V 4.5 Stable buildBrowser Gallese: Browser 1.0.0.9: Il Browser Gallese va su internet veloce,gratis e Sicuro dalla nascita Su questo sito ci sono i fle d'istallazione e il codice sorgente scritti con...CSS 360 Planetary Calendar: LCO: Documents for the LCO MilestoneGArphics: Backgrounds: GArphics examples converted into PNG-images with a resolution of 1680x1050.GArphics: Beta v0.8: Beta v0.8. Includes built-in examples and a lot of new settings.Helium Frog Animator: Helium Frog Flow Diagram: This file contains a flow diagram showing how the program functions. The image is in .bmp format.Highlighterr for Visual C++ 2010: Highlighterr for Visual C++ 2010 Test Release: Seems I'm updating this on a daily basis now, I keep finding things to add/fix. So stay tuned for updates! Current Version: 1.02 Now picks up chan...HTML Ruby: 6.22.2: Slightly improved performance on inserted ruby Cleaned up the code someiTuner - The iTunes Companion: iTuner 1.2.3767 Beta 3: Beta 3 is requires iTunes 9.1.0.79 or later A Librarian status panel showing active and queued Librarian scanners. This will be hidden behind the ...Jet Login Tool (JetLoginTool): Logout - 1.5.3765.28026: Changed: Will logout from Jet if the "Stop" button is hit Fixed: Bug where A notification is received that the engine has stopped, but it hasn't ...jouba Images Converter: Release: The first beta release for Images ConverterKeep Focused - an enhanced tool for Time Management using Pomodoro Technique: Release 0.3 Alpha: Release Notes (Release 0.3 Alpha) The alpha preview provides the basic functionality used by the Pomodoro Technique. Files 1. Keep Focused Exe...Mercurial to Team Foundation Server Work Item Hook: Version 0.2: Changes Include: Eliminates the need for the Suds package by hand-rolling its own soap implementation Ability to specify columns and computed col...Mews: Mews.Application V0.8: Installation InstuctionsNew Features16569 16571 Fixed Issues16668 Missing Features16567 Known Remaining IssuesLarge text-only articles require la...MiniTwitter: 1.12: MiniTwitter 1.12 更新内容注意このバージョンは開発中につき、正式リリースまでに複数回更新されることがあります。また不安定かもしれませんので、新機能を試したいという方以外には 1.11 をお勧めします。追加 List 機能に仮対応タイムラインの振り分け条件として...Multiwfn: multiwfn1.3.1_binary: multiwfn1.3.1_binaryMultiwfn: multiwfn1.3.1_source: multiwfn1.3.1_sourceMVC2 RESTful Library: Source Code: VS2010 Source CodeMy Schedule Tool: MyScheduleTool 0.1: Initial version for MyScheduleTool. If you have any comments about the project, please let me know. My email is cmicmobile@gmail.comNestoria.NET: Nestoria.NET 0.8.1: Provides access to the Nestoria API. Documentation contains a basic getting started guide. Please visit Darren Edge's blog for ongoing developmen...OgmoXNA: OgmoXNA Binaries: Binary release libraries for OgmoXNA and OgmoXNA content pipeline extensions. Includes both Windows and Xbox360 binaries in separate directories.OgmoXNA: OgmoXNA Source: NOTE: THE ASSETS PROVIDED IN THE DEMO GAME DISTRIBUTED WITH THIS SOURCE ARE PROPERTY OF MATT THORSON, AND ARE NOT TO BE USED FOR ANY OTHER PROJECT...PokeIn Comet Ajax Library: PokeIn v07 x64: New FeaturesInstant Client Disconnected Detection Disable Server Push Technology OptionPokeIn Comet Ajax Library: PokeIn v07 x86: New FeaturesInstant Client Disconnected Detection Disable Server Push Technology OptionPowerShell Admin Modules: PAM 0.1: Version 0.1 includes share moduleRehost Image: 1.3.8: Added option to remove resolution/size text from the thumbnails of uploaded images in ImageShack. Fixed issue with FTP servers that give back jun...Site Directory for SharePoint 2010 (from Microsoft Consulting Services, UK): v1.3: Same as v1.2 with the following changes: Source Code and WSP updated to SharePoint 2010 and Visual Studio 2010 RTM releases Fields seperated into...SSIS Credit Card Number Validator 08 (CCNV08): CCNV08-1004Apr-R1: Version Released in Apr 2010SSIS Twitter Suite: v2.0: Upgraded Twitter Task to SSIS 2008sTASKedit: sTASKedit v0.7 Alpha: Features:Import of v56 (CN 1.3.6 v101) and v79 (PWI 1.4.2 v312) tasks.data files Export to v56 (Client) and v55 (Server) Clone & Delete Tasks ...StyleCop for ReSharper: StyleCop for ReSharper 5.0.14724.1: StyleCop for ReSharper 5.0.14724.1 =============== StyleCop 4.3.3.0 ReSharper 5.0.1659.36 Visual Studio 2008 / Visual Studio 2010 Fixes === G...Windows Live ID SSO Luminis Integration: Version 1.2: This new version has been updated for accomodating the new release of the Windows Live SSO Toolkit v4.2.WPF Application Framework (WAF): WPF Application Framework (WAF) 1.0.0.11: Version: 1.0.0.11 (Milestone 11): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requi...XAML Code Snippets addin for Visual Studio 2010: Release for VS 2010 RTM: Release built for Visual Studio 2010 RTMXP-More: 1.0: Release Notes Improved VM folder recognition Added About window Added input validation and exception handling If exist, vud and vpcbackupfile...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitSilverlight ToolkitMicrosoft SQL Server Product Samples: Databasepatterns & practices – Enterprise LibraryWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesPHPExcelMost Active Projectspatterns & practices – Enterprise LibraryRawrGMap.NET - Great Maps for Windows Forms & PresentationBlogEngine.NETParticle Plot PivotNB_Store - Free DotNetNuke Ecommerce Catalog ModuleDotNetZip LibraryFarseer Physics EngineN2 CMSpatterns & practices: Composite WPF and Silverlight

Read the article

Recover Data Like a Forensics Expert Using an Ubuntu Live CD

- by Trevor Bekolay

There are lots of utilities to recover deleted files, but what if you can’t boot up your computer, or the whole drive has been formatted? We’ll show you some tools that will dig deep and recover the most elusive deleted files, or even whole hard drive partitions. We’ve shown you simple ways to recover accidentally deleted files, even a simple method that can be done from an Ubuntu Live CD, but for hard disks that have been heavily corrupted, those methods aren’t going to cut it. In this article, we’ll examine four tools that can recover data from the most messed up hard drives, regardless of whether they were formatted for a Windows, Linux, or Mac computer, or even if the partition table is wiped out entirely. Note: These tools cannot recover data that has been overwritten on a hard disk. Whether a deleted file has been overwritten depends on many factors – the quicker you realize that you want to recover a file, the more likely you will be able to do so. Our setup To show these tools, we’ve set up a small 1 GB hard drive, with half of the space partitioned as ext2, a file system used in Linux, and half the space partitioned as FAT32, a file system used in older Windows systems. We stored ten random pictures on each hard drive. We then wiped the partition table from the hard drive by deleting the partitions in GParted. Is our data lost forever? Installing the tools All of the tools we’re going to use are in Ubuntu’s universe repository. To enable the repository, open Synaptic Package Manager by clicking on System in the top-left, then Administration > Synaptic Package Manager. Click on Settings > Repositories and add a check in the box labelled “Community-maintained Open Source software (universe)”. Click Close, and then in the main Synaptic Package Manager window, click the Reload button. Once the package list has reloaded, and the search index rebuilt, search for and mark for installation one or all of the following packages: testdisk, foremost, and scalpel. Testdisk includes TestDisk, which can recover lost partitions and repair boot sectors, and PhotoRec, which can recover many different types of files from tons of different file systems. Foremost, originally developed by the US Air Force Office of Special Investigations, recovers files based on their headers and other internal structures. Foremost operates on hard drives or drive image files generated by various tools. Finally, scalpel performs the same functions as foremost, but is focused on enhanced performance and lower memory usage. Scalpel may run better if you have an older machine with less RAM. Recover hard drive partitions If you can’t mount your hard drive, then its partition table might be corrupted. Before you start trying to recover your important files, it may be possible to recover one or more partitions on your drive, recovering all of your files with one step. Testdisk is the tool for the job. Start it by opening a terminal (Applications > Accessories > Terminal) and typing in: sudo testdisk If you’d like, you can create a log file, though it won’t affect how much data you recover. Once you make your choice, you’re greeted with a list of the storage media on your machine. You should be able to identify the hard drive you want to recover partitions from by its size and label. TestDisk asks you select the type of partition table to search for. In most cases (ext2/3, NTFS, FAT32, etc.) you should select Intel and press Enter. Highlight Analyse and press enter. In our case, our small hard drive has previously been formatted as NTFS. Amazingly, TestDisk finds this partition, though it is unable to recover it. It also finds the two partitions we just deleted. We are able to change their attributes, or add more partitions, but we’ll just recover them by pressing Enter. If TestDisk hasn’t found all of your partitions, you can try doing a deeper search by selecting that option with the left and right arrow keys. We only had these two partitions, so we’ll recover them by selecting Write and pressing Enter. Testdisk informs us that we will have to reboot. Note: If your Ubuntu Live CD is not persistent, then when you reboot you will have to reinstall any tools that you installed earlier. After restarting, both of our partitions are back to their original states, pictures and all. Recover files of certain types For the following examples, we deleted the 10 pictures from both partitions and then reformatted them. PhotoRec Of the three tools we’ll show, PhotoRec is the most user-friendly, despite being a console-based utility. To start recovering files, open a terminal (Applications > Accessories > Terminal) and type in: sudo photorec To begin, you are asked to select a storage device to search. You should be able to identify the right device by its size and label. Select the right device, and then hit Enter. PhotoRec asks you select the type of partition to search. In most cases (ext2/3, NTFS, FAT, etc.) you should select Intel and press Enter. You are given a list of the partitions on your selected hard drive. If you want to recover all of the files on a partition, then select Search and hit enter. However, this process can be very slow, and in our case we only want to search for pictures files, so instead we use the right arrow key to select File Opt and press Enter. PhotoRec can recover many different types of files, and deselecting each one would take a long time. Instead, we press “s” to clear all of the selections, and then find the appropriate file types – jpg, gif, and png – and select them by pressing the right arrow key. Once we’ve selected these three, we press “b” to save these selections. Press enter to return to the list of hard drive partitions. We want to search both of our partitions, so we highlight “No partition” and “Search” and then press Enter. PhotoRec prompts for a location to store the recovered files. If you have a different healthy hard drive, then we recommend storing the recovered files there. Since we’re not recovering very much, we’ll store it on the Ubuntu Live CD’s desktop. Note: Do not recover files to the hard drive you’re recovering from. PhotoRec is able to recover the 20 pictures from the partitions on our hard drive! A quick look in the recup_dir.1 directory that it creates confirms that PhotoRec has recovered all of our pictures, save for the file names. Foremost Foremost is a command-line program with no interactive interface like PhotoRec, but offers a number of command-line options to get as much data out of your had drive as possible. For a full list of options that can be tweaked via the command line, open up a terminal (Applications > Accessories > Terminal) and type in: foremost –h In our case, the command line options that we are going to use are: -t, a comma-separated list of types of files to search for. In our case, this is “jpeg,png,gif”. -v, enabling verbose-mode, giving us more information about what foremost is doing. -o, the output folder to store recovered files in. In our case, we created a directory called “foremost” on the desktop. -i, the input that will be searched for files. This can be a disk image in several different formats; however, we will use a hard disk, /dev/sda. Our foremost invocation is: sudo foremost –t jpeg,png,gif –o foremost –v –i /dev/sda Your invocation will differ depending on what you’re searching for and where you’re searching for it. Foremost is able to recover 17 of the 20 files stored on the hard drive. Looking at the files, we can confirm that these files were recovered relatively well, though we can see some errors in the thumbnail for 00622449.jpg. Part of this may be due to the ext2 filesystem. Foremost recommends using the –d command-line option for Linux file systems like ext2. We’ll run foremost again, adding the –d command-line option to our foremost invocation: sudo foremost –t jpeg,png,gif –d –o foremost –v –i /dev/sda This time, foremost is able to recover all 20 images! A final look at the pictures reveals that the pictures were recovered with no problems. Scalpel Scalpel is another powerful program that, like Foremost, is heavily configurable. Unlike Foremost, Scalpel requires you to edit a configuration file before attempting any data recovery. Any text editor will do, but we’ll use gedit to change the configuration file. In a terminal window (Applications > Accessories > Terminal), type in: sudo gedit /etc/scalpel/scalpel.conf scalpel.conf contains information about a number of different file types. Scroll through this file and uncomment lines that start with a file type that you want to recover (i.e. remove the “#” character at the start of those lines). Save the file and close it. Return to the terminal window. Scalpel also has a ton of command-line options that can help you search quickly and effectively; however, we’ll just define the input device (/dev/sda) and the output folder (a folder called “scalpel” that we created on the desktop). Our invocation is: sudo scalpel /dev/sda –o scalpel Scalpel is able to recover 18 of our 20 files. A quick look at the files scalpel recovered reveals that most of our files were recovered successfully, though there were some problems (e.g. 00000012.jpg). Conclusion In our quick toy example, TestDisk was able to recover two deleted partitions, and PhotoRec and Foremost were able to recover all 20 deleted images. Scalpel recovered most of the files, but it’s very likely that playing with the command-line options for scalpel would have enabled us to recover all 20 images. These tools are lifesavers when something goes wrong with your hard drive. If your data is on the hard drive somewhere, then one of these tools will track it down! Similar Articles Productive Geek Tips Recover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDUse an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveReset Your Ubuntu Password Easily from the Live CDBackup Your Windows Live Writer SettingsAdding extra Repositories on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

Read the article

Move Files from a Failing PC with an Ubuntu Live CD

- by Trevor Bekolay

You’ve loaded the Ubuntu Live CD to salvage files from a failing system, but where do you store the recovered files? We’ll show you how to store them on external drives, drives on the same PC, a Windows home network, and other locations. We’ve shown you how to recover data like a forensics expert, but you can’t store recovered files back on your failed hard drive! There are lots of ways to transfer the files you access from an Ubuntu Live CD to a place that a stable Windows machine can access them. We’ll go through several methods, starting each section from the Ubuntu desktop – if you don’t yet have an Ubuntu Live CD, follow our guide to creating a bootable USB flash drive, and then our instructions for booting into Ubuntu. If your BIOS doesn’t let you boot using a USB flash drive, don’t worry, we’ve got you covered! Use a Healthy Hard Drive If your computer has more than one hard drive, or your hard drive is healthy and you’re in Ubuntu for non-recovery reasons, then accessing your hard drive is easy as pie, even if the hard drive is formatted for Windows. To access a hard drive, it must first be mounted. To mount a healthy hard drive, you just have to select it from the Places menu at the top-left of the screen. You will have to identify your hard drive by its size. Clicking on the appropriate hard drive mounts it, and opens it in a file browser. You can now move files to this hard drive by drag-and-drop or copy-and-paste, both of which are done the same way they’re done in Windows. Once a hard drive, or other external storage device, is mounted, it will show up in the /media directory. To see a list of currently mounted storage devices, navigate to /media by clicking on File System in a File Browser window, and then double-clicking on the media folder. Right now, our media folder contains links to the hard drive, which Ubuntu has assigned a terribly uninformative label, and the PLoP Boot Manager CD that is currently in the CD-ROM drive. Connect a USB Hard Drive or Flash Drive An external USB hard drive gives you the advantage of portability, and is still large enough to store an entire hard disk dump, if need be. Flash drives are also very quick and easy to connect, though they are limited in how much they can store. When you plug a USB hard drive or flash drive in, Ubuntu should automatically detect it and mount it. It may even open it in a File Browser automatically. Since it’s been mounted, you will also see it show up on the desktop, and in the /media folder. Once it’s been mounted, you can access it and store files on it like you would any other folder in Ubuntu. If, for whatever reason, it doesn’t mount automatically, click on Places in the top-left of your screen and select your USB device. If it does not show up in the Places list, then you may need to format your USB drive. To properly remove the USB drive when you’re done moving files, right click on the desktop icon or the folder in /media and select Safely Remove Drive. If you’re not given that option, then Eject or Unmount will effectively do the same thing. Connect to a Windows PC on your Local Network If you have another PC or a laptop connected through the same router (wired or wireless) then you can transfer files over the network relatively quickly. To do this, we will share one or more folders from the machine booted up with the Ubuntu Live CD over the network, letting our Windows PC grab the files contained in that folder. As an example, we’re going to share a folder on the desktop called ToShare. Right-click on the folder you want to share, and click Sharing Options. A Folder Sharing window will pop up. Check the box labeled Share this folder. A window will pop up about the sharing service. Click the Install service button. Some files will be downloaded, and then installed. When they’re done installing, you’ll be appropriately notified. You will be prompted to restart your session. Don’t worry, this won’t actually log you out, so go ahead and press the Restart session button. The Folder Sharing window returns, with Share this folder now checked. Edit the Share name if you’d like, and add checkmarks in the two checkboxes below the text fields. Click Create Share. Nautilus will ask your permission to add some permissions to the folder you want to share. Allow it to Add the permissions automatically. The folder is now shared, as evidenced by the new arrows above the folder’s icon. At this point, you are done with the Ubuntu machine. Head to your Windows PC, and open up Windows Explorer. Click on Network in the list on the left, and you should see a machine called UBUNTU in the right pane. Note: This example is shown in Windows 7; the same steps should work for Windows XP and Vista, but we have not tested them. Double-click on UBUNTU, and you will see the folder you shared earlier! As well as any other folders you’ve shared from Ubuntu. Double click on the folder you want to access, and from there, you can move the files from the machine booted with Ubuntu to your Windows PC. Upload to an Online Service There are many services online that will allow you to upload files, either temporarily or permanently. As long as you aren’t transferring an entire hard drive, these services should allow you to transfer your important files from the Ubuntu environment to any other machine with Internet access. We recommend compressing the files that you want to move, both to save a little bit of bandwidth, and to save time clicking on files, as uploading a single file will be much less work than a ton of little files. To compress one or more files or folders, select them, and then right-click on one of the members of the group. Click Compress…. Give the compressed file a suitable name, and then select a compression format. We’re using .zip because we can open it anywhere, and the compression rate is acceptable. Click Create and the compressed file will show up in the location selected in the Compress window. Dropbox If you have a Dropbox account, then you can easily upload files from the Ubuntu environment to Dropbox. There is no explicit limit on the size of file that can be uploaded to Dropbox, though a free account begins with a total limit of 2 GB of files in total. Access your account through Firefox, which can be opened by clicking on the Firefox logo to the right of the System menu at the top of the screen. Once into your account, press the Upload button on top of the main file list. Because Flash is not installed in the Live CD environment, you will have to switch to the basic uploader. Click Browse…find your compressed file, and then click Upload file. Depending on the size of the file, this could take some time. However, once the file has been uploaded, it should show up on any computer connected through Dropbox in a matter of minutes. Google Docs Google Docs allows the upload of any type of file – making it an ideal place to upload files that we want to access from another computer. While your total allocation of space varies (mine is around 7.5 GB), there is a per-file maximum of 1 GB. Log into Google Docs, and click on the Upload button at the top left of the page. Click Select files to upload and select your compressed file. For safety’s sake, uncheck the checkbox concerning converting files to Google Docs format, and then click Start upload. Go Online – Through FTP If you have access to an FTP server – perhaps through your web hosting company, or you’ve set up an FTP server on a different machine – you can easily access the FTP server in Ubuntu and transfer files. Just make sure you don’t go over your quota if you have one. You will need to know the address of the FTP server, as well as the login information. Click on Places > Connect to Server… Choose the FTP (with login) Service type, and fill in your information. Adding a bookmark is optional, but recommended. You will be asked for your password. You can choose to remember it until you logout, or indefinitely. You can now browse your FTP server just like any other folder. Drop files into the FTP server and you can retrieve them from any computer with an Internet connection and an FTP client. Conclusion While at first the Ubuntu Live CD environment may seem claustrophobic, it has a wealth of options for connecting to peripheral devices, local computers, and machines on the Internet – and this article has only scratched the surface. Whatever the storage medium, Ubuntu’s got an interface for it! Similar Articles Productive Geek Tips Backup Your Windows Live Writer SettingsMove a Window Without Clicking the Titlebar in UbuntuRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayReset Your Ubuntu Password Easily from the Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals

Read the article

Special thanks to everyone that helped me in 2010.

- by mbcrump

2010 has been a very good year for me and I wanted to create a list and thank everyone for what they have done for me. I also wanted to thank everyone for reading and subscribing to my blog. It is hard to believe that people actually want to read what I write. I feel like I owe a huge thanks to everyone listed below. Looking back upon 2010, I feel that I’ve grown as a developer and you are part of that reason. Sometimes we get caught up in day to day work and forget to give thanks to those that helped us along the way. The list below is mine, it includes people and companies. This list is obviously not going to include everyone that has helped, just those that have stood out in my mind. When I think back upon 2010, their names keep popping up in my head. So here goes, in no particular order. People Dave Campbell – For everything he has done for the Silverlight Community with his Silverlight Cream blog. I can’t think of a better person to get recognition at the Silverlight FireStarter event. I also wanted to thank him for spending several hours of his time helping me track down a bug in my feedburner account. Victor Gaudioso – For his large collection of video tutorials on his blog and the passion and enthusiasm he has for Silverlight. We have talked on the phone and I’ve never met anyone so fired up for Silverlight. Kunal Chowdhury – Kunal has always been available for me to bounce ideas off of. Kunal has also answered a lot of questions that stumped me. His blog and CodeProject article have green a great help to me and the Silverlight Community. Glen Gordon – I was looking frantically for a Windows Phone 7 several months before release and Glen found one for me. This allowed me to start a blog series on the Windows Phone 7 hardware and developing an application from start to finish that Scott Guthrie retweeted. Jeff Blankenburg – For listening to my complaints in the early stages of Windows Phone 7. Jeff was always very polite and gave me his cell phone number to talk it over. He also walked me through several problems that I was having early on. Pete Brown – For writing Silverlight 4 in Action. This book is definitely a labor of love. I followed Pete on Twitter as he was writing it and he spent a lot of late nights and weekends working on it. I felt a lot smarter after reading it the first time. The second time was even better. John Papa – For all of his work on the Silverlight Firestarter and the Silverlight community in general. He has also helped me on a personal level with several things. Daniel Heisler – For putting up with me the past year while we worked on many .NET projects together in 2010. Alvin Ashcraft – For publishing a daily blog post on the best of .NET links. He has linked to my site many times and I really appreciate what he does for the community. Chris Alcock – For publishing the Morning Brew every weekday. I remember when I first appeared on his site, I started getting hundreds of hits on my site and wondered if I was getting a DOS attack or something. It was great to find out that Chris had linked to one of my articles. Joel Cochran – For spending a week teaching “Blend-O-Rama”. This was my one of my favorite sessions of this year. I learned a lot about Expression Blend from it and the best part was that it was free and during lunchtime. Jeremy Likness – Jeremy is smart – very smart. I have learned a lot from Jeremy over the past year. He is also involved in the Silverlight community in every way possible, from forums to blog post to screencast to open source. It goes on and on. The people that I met at VSLive Orlando 2010. I had a great time chatting with Walt Ritscher, Wallace McClure, Tim Huckabee and David Platt. Also a special thanks to all of my friends on Twitter like @wilhil, @DBVaughan, @DataArtist, @wbm, @DirkStrauss and @rsringeri and many many more. Software Companies / Events / May of gave me FREE stuff. =) Microsoft (3) – I was sent a free coupon code by Microsoft to take the Silverlight 4 Beta Exam. I jumped on the offer and took the exam. It was great being selected to try out the exam before it goes public even though Microsoft eventually published a universal coupon code for everyone. I am still waiting to find out if I passed the exam. My fingers are crossed. Microsoft reaching out to me with some questions regarding the .NET Community. I’ve never had a company contact me with such interest in the community. Having a contest where 75 people could win a $100 gift certificate and a T-Shirt for submitting a Windows Phone 7 app. I submitted my app and won. All of the free launch events this year (Windows Phone 7, Visual Studio 2010, ASP.NET MVC). Wintellect – For providing an awesome day of free technical training called T.E.N. Where else can you get free training from some of the best programmers in the world? I also won a contest from them that included a NETAdvantage Ultimate License from Infragistics. VSLive – I attended the Orlando 2010 Conference and it was the best developer’s conference that I have ever attended. I got to know a lot of people at this conference and hang out with many wonderful speakers. I live tweeted the event and while it may have annoyed some, the organizers of VSLive loved it. I won the contest on Twitter and they invited me back to the 2011 session of my choice. This is a very nice gift and I really appreciate the generosity. BarcodeLib.com – For providing free barcode generating tools for a Non-Profit ASP.NET project that I was working on. Their third party controls really made this a breeze compared to my existing solution. NDepend – It is absolutely the best tool to improve code quality. The product is extremely large and I would recommend heading over to their site to check it out. Silverlight Spy – I was writing a blog post on Silverlight Spy and Koen Zwikstra provided a FREE license to me. If you ever wanted to peek inside of a Silverlight Application then this is the tool for you. He is also working on a version that will support OOB and Windows Phone 7. I would recommend checking out his site. Birmingham .NET Users Group / Silverlight Nights User Group – It takes a lot of time to put together a user group meeting every month yet it always seems to happen. I don’t want to name names for fear of leaving someone out but both of these User Groups are excellent if you live in the Birmingham, Alabama area. Publishing Companies Manning Publishing – For giving me early access to Silverlight 4 in Action by Pete Brown. It was really nice to be able to read this awesome book while Pete was writing it. I was also one of the first people to publish a review of the book. Sams Publishing and DZone – For providing a copy of Silverlight 4 Unleashed by Laurent Bugnion for me to review for their site. The review is coming in January 2011. Special Shoutout to the following 3rd Party Silverlight Controls It has been a great pleasure to work with the following companies on 3rd Party Control Giveaways every month. It always amazes me how every 3rd Party Control company is so eager to help out the community. I’ve never been turned down by any of these companies! These giveaways have sparked a lot of interest in Silverlight and hopefully I can continue giving away a new set every month. If you are a 3rd Party Control company and are interested in participating in these giveaways then please email me at mbcrump29[at]gmail[d0t].com. The companies below have already participated in my giveaways: Infragistics (December 2010) - Win a set of Infragistics Silverlight Controls with Data Visualization! Mindscape (November 2010) - Mindscape Silverlight Controls + Free Mega Pack Contest Telerik (October 2010) - Win Telerik RadControls for Silverlight! ($799 Value) Again, I just wanted to say Thanks to everyone for helping me grow as a developer. Subscribe to my feed

Read the article

Java JRE 7 Certified with Oracle E-Business Suite

- by Steven Chan (Oracle Development)

Java Runtime Environment 7u10 (a.k.a. JRE 1.7.0_10 build 18) and later updates on the JRE 7 codeline are now certified with Oracle E-Business Suite Release 11i and 12 Windows-based desktop clients. What's needed to enable EBS environments for JRE 7? EBS customers should ensure that they are running JRE 7u10, at minimum, on Windows desktop clients. Of the compatibility issues identified with JRE 7, the most critical is an issue that prevents E-Business Suite Forms-based products from launching on Windows desktops that are running JRE 7. Customers can prevent this issue -- and all other JRE 7 compatibility issues -- by ensuring that they have applied the latest certified patches documented for JRE 7 configurations to their EBS application tier servers. These are summarized here for convenience. If the requirements change over time, please check the Notes for the authoritative list of patches: Apply Forms patch 14615390 to EBS 11i environments (Note 125767.1) Apply Forms patch 14614795 to EBS 12.0 and 12.1 environments (Note 437878.1) These patches are compatible with JRE 6 and 7, production ready, and fully-tested with the E-Business Suite. These patches may be applied immediately to all E-Business Suite environments. All other Forms prerequisites documented in the Notes above should also be applied. Where are the official patch requirements documented? All patches required for ensuring full compatibility of the E-Business Suite with JRE 7 are documented in these Notes: For EBS 11i: Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 11i (Note 290807.1) Upgrading Developer 6i with Oracle E-Business Suite 11i (Note 125767.1) For EBS 12 Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 12 (Note 393931.1) Upgrading OracleAS 10g Forms and Reports in Oracle E-Business Suite Release 12 (Note 437878.1) Prerequisites for 32-bit and 64-bit JRE certifications JRE 1.70_10 32-bit + EBS 11.5.10.2 Windows XP SP3 Windows Vista SP1 and SP2 Windows 7 and Windows 7 SP1 Forms 6.0.8.28.x patch 14615390 (Note 125767.1) JRE 1.70_10 32-bit + EBS 12.0 & 12.1 Windows XP SP3 Windows Vista SP1 and SP2 Windows 7 and Windows 7 SP1 Forms 10g overlay patch 14614795 (Note 437878.1) SSL Users: 10.1.0.5 version of Patch 6370967 applied to AS 10.1.3 with OPatch. Note: This fix is already included in the April 2011 AS 10.1.3.5 CPU patch and later. JRE 1.7.0_10 64-bit + EBS 11.5.10.2 Windows 7 (64-bit) and Windows 7 SP1 (64-bit) Forms 6.0.8.28.x patch 14615390 (Note 125767.1) JRE 1.70_10 64-bit + EBS 12.0 & 12.1 Windows 7 (64-bit) and Windows 7 SP1 (64-bit) Forms 10g overlay patch 14614795 (Note 437878.1) SSL Users: 10.1.0.5 version of Patch 6370967 applied to AS 10.1.3 with OPatch. Note: This fix is already included in the April 2011 AS 10.1.3.5 CPU patch and later. EBS + Discoverer 11g Users JRE 1.7.0_10 (7u10) is certified for Discoverer 11g in E-Business Suite environments with the following minimum requirements: Discoverer (11g) 11.1.1.6 plus Patch 13877486 and later Reference: How To Find Oracle BI Discoverer 10g and 11g Certification Information (Document 233047.1) Worried about the 'mismanaged session cookie' issue? No need to worry -- it's fixed. To recap: JRE releases 1.6.0_18 through 1.6.0_22 had issues with mismanaging session cookies that affected some users in some circumstances. The fix for those issues was first included in JRE 1.6.0_23. These fixes will carry forward and continue to be fixed in all future JRE releases on the JRE 6 and 7 codelines. In other words, if you wish to avoid the mismanaged session cookie issue, you should apply any release after JRE 1.6.0_22 on the JRE 6 codeline, and JRE 7u10 and later JRE 7 codeline updates. All JRE 6 and 7 releases are certified with EBS upon release Our standard policy is that all E-Business Suite customers can apply all JRE updates to end-user desktops from JRE 1.6.0_03 and later updates on the 1.6 codeline, and from JRE 7u10 and later updates on the JRE 7 codeline. We test all new JRE 1.6 and JRE 7 releases in parallel with the JRE development process, so all new JRE 1.6 and 7 releases are considered certified with the E-Business Suite on the same day that they're released by our Java team. You do not need to wait for a certification announcement before applying new JRE 1.6 or JRE 7 releases to your EBS users' desktops. Implications of Java 6 End of Public Updates for EBS Users The Support Roadmap for Oracle Java is published here: Oracle Java SE Support Roadmap The latest updates to that page (as of Sept. 19, 2012) state (emphasis added): Java SE 6 End of Public Updates Notice After February 2013, Oracle will no longer post updates of Java SE 6 to its public download sites. Existing Java SE 6 downloads already posted as of February 2013 will remain accessible in the Java Archive on Oracle Technology Network. Developers and end-users are encouraged to update to more recent Java SE versions that remain available for public download. For enterprise customers, who need continued access to critical bug fixes and security fixes as well as general maintenance for Java SE 6 or older versions, long term support is available through Oracle Java SE Support . What does this mean for Oracle E-Business Suite users? EBS users fall under the category of "enterprise users" above. Java is an integral part of the Oracle E-Business Suite technology stack, so EBS users will continue to receive Java SE 6 updates after February 2013. In other words, nothing will change for EBS users after February 2013. EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6. These Java SE 6 updates will be made available to EBS users for the Extended Support periods documented in the Oracle Lifetime Support policy document for Oracle Applications (PDF): EBS 11i Extended Support ends November 2013 EBS 12.0 Extended Support ends January 2015 EBS 12.1 Extended Support ends December 2018 Will EBS users be forced to upgrade to JRE 7 for Windows desktop clients? No. This upgrade is highly recommended but currently remains optional. JRE 6 will be available to Windows users to run with EBS for the duration of your respective EBS Extended Support period. Updates will be delivered via My Oracle Support, where you can continue to receive critical bug fixes and security fixes as well as general maintenance for JRE 6 desktop clients. Coexistence of JRE 6 and JRE 7 on Windows desktops The upgrade to JRE 7 is highly recommended for EBS users, but some users may need to run both JRE 6 and 7 on their Windows desktops for reasons unrelated to the E-Business Suite. Most EBS configurations with IE and Firefox use non-static versioning by default. JRE 7 will be invoked instead of JRE 6 if both are installed on a Windows desktop. For more details, see "Appendix B: Static vs. Non-static Versioning and Set Up Options" in Notes 290801.1 and 393931.1. Applying Updates to JRE 6 and JRE 7 to Windows desktops Auto-update will keep JRE 7 up-to-date for Windows users with JRE 7 installed. Auto-update will only keep JRE 7 up-to-date for Windows users with both JRE 6 and 7 installed. JRE 6 users are strongly encouraged to apply the latest Critical Patch Updates as soon as possible after each release. The Jave SE CPUs will be available via My Oracle Support. EBS users can find more information about JRE 6 and 7 updates here: Information Center: Installation & Configuration for Oracle Java SE (Note 1412103.2) The dates for future Java SE CPUs can be found on the Critical Patch Updates, Security Alerts and Third Party Bulletin. An RSS feed is available on that site for those who would like to be kept up-to-date. What will Mac users need? Oracle will provide updates to JRE 7 for Mac OS X users. EBS users running Macs will need to upgrade to JRE 7 to receive JRE updates. The certification of Oracle E-Business Suite with JRE 7 for Mac-based desktop clients accessing EBS Forms-based content is underway. Mac users waiting for that certification may find this article useful: How to Reenable Apple Java 6 Plug-in for Mac EBS Users Will EBS users be forced to upgrade to JDK 7 for EBS application tier servers? No. This upgrade will be highly recommended but will be optional for EBS application tier servers running on Windows, Linux, and Solaris. You can choose to remain on JDK 6 for the duration of your respective EBS Extended Support period. If you remain on JDK 6, you will continue to receive critical bug fixes and security fixes as well as general maintenance for JDK 6. The certification of Oracle E-Business Suite with JDK 7 for EBS application tier servers on Windows, Linux, and Solaris as well as other platforms such as IBM AIX and HP-UX is planned. Customers running platforms other than Windows, Linux, and Solaris should refer to their Java vendors's sites for more information about their support policies. References Recommended Browsers for Oracle Applications 11i (Metalink Note 285218.1) Upgrading Sun JRE (Native Plug-in) with Oracle Applications 11i for Windows Clients (Metalink Note 290807.1) Recommended Browsers for Oracle Applications 12 (MetaLink Note 389422.1) Upgrading JRE Plugin with Oracle Applications R12 (MetaLink Note 393931.1) Related Articles Mismanaged Session Cookie Issue Fixed for EBS in JRE 1.6.0_23 Roundup: Oracle JInitiator 1.3 Desupported for EBS Customers in July 2009

Read the article

JMS Step 3 - Using the QueueReceive.java Sample Program to Read a Message from a JMS Queue

- by John-Brown.Evans

JMS Step 3 - Using the QueueReceive.java Sample Program to Read a Message from a JMS Queue ol{margin:0;padding:0} .c18_3{vertical-align:top;width:487.3pt;border-style:solid;background-color:#f3f3f3;border-color:#000000;border-width:1pt;padding:0pt 5pt 0pt 5pt} .c20_3{vertical-align:top;width:487.3pt;border-style:solid;border-color:#ffffff;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c19_3{background-color:#ffffff} .c17_3{list-style-type:circle;margin:0;padding:0} .c12_3{list-style-type:disc;margin:0;padding:0} .c6_3{font-style:italic;font-weight:bold} .c10_3{color:inherit;text-decoration:inherit} .c1_3{font-size:10pt;font-family:"Courier New"} .c2_3{line-height:1.0;direction:ltr} .c9_3{padding-left:0pt;margin-left:72pt} .c15_3{padding-left:0pt;margin-left:36pt} .c3_3{color:#1155cc;text-decoration:underline} .c5_3{height:11pt} .c14_3{border-collapse:collapse} .c7_3{font-family:"Courier New"} .c0_3{background-color:#ffff00} .c16_3{font-size:18pt} .c8_3{font-weight:bold} .c11_3{font-size:24pt} .c13_3{font-style:italic} .c4_3{direction:ltr} .title{padding-top:24pt;line-height:1.15;text-align:left;color:#000000;font-size:36pt;font-family:"Arial";font-weight:bold;padding-bottom:6pt}.subtitle{padding-top:18pt;line-height:1.15;text-align:left;color:#666666;font-style:italic;font-size:24pt;font-family:"Georgia";padding-bottom:4pt} li{color:#000000;font-size:10pt;font-family:"Arial"} p{color:#000000;font-size:10pt;margin:0;font-family:"Arial"} h1{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:24pt;font-family:"Arial";font-weight:normal} h2{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:18pt;font-family:"Arial";font-weight:normal} h3{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:14pt;font-family:"Arial";font-weight:normal} h4{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:12pt;font-family:"Arial";font-weight:normal} h5{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:11pt;font-family:"Arial";font-weight:normal} h6{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:10pt;font-family:"Arial";font-weight:normal} This post continues the series of JMS articles which demonstrate how to use JMS queues in a SOA context. In the first post, JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g we looked at how to create a JMS queue and its dependent objects in WebLogic Server. In the previous post, JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue I showed how to write a message to that JMS queue using the QueueSend.java sample program. In this article, we will use a similar sample, the QueueReceive.java program to read the message from that queue. Please review the previous posts if you have not already done so, as they contain prerequisites for executing the sample in this article. 1. Source code The following java code will be used to read the message(s) from the JMS queue. As with the previous example, it is based on a sample program shipped with the WebLogic Server installation. The sample is not installed by default, but needs to be installed manually using the WebLogic Server Custom Installation option, together with many, other useful samples. You can either copy-paste the following code into your editor, or install all the samples. The knowledge base article in My Oracle Support: How To Install WebLogic Server and JMS Samples in WLS 10.3.x (Doc ID 1499719.1) describes how to install the samples. QueueReceive.java package examples.jms.queue; import java.util.Hashtable; import javax.jms.*; import javax.naming.Context; import javax.naming.InitialContext; import javax.naming.NamingException; /** * This example shows how to establish a connection to * and receive messages from a JMS queue. The classes in this * package operate on the same JMS queue. Run the classes together to * witness messages being sent and received, and to browse the queue * for messages. This class is used to receive and remove messages * from the queue. * * @author Copyright (c) 1999-2005 by BEA Systems, Inc. All Rights Reserved. */ public class QueueReceive implements MessageListener { // Defines the JNDI context factory. public final static String JNDI_FACTORY="weblogic.jndi.WLInitialContextFactory"; // Defines the JMS connection factory for the queue. public final static String JMS_FACTORY="jms/TestConnectionFactory"; // Defines the queue. public final static String QUEUE="jms/TestJMSQueue"; private QueueConnectionFactory qconFactory; private QueueConnection qcon; private QueueSession qsession; private QueueReceiver qreceiver; private Queue queue; private boolean quit = false; /** * Message listener interface. * @param msg message */ public void onMessage(Message msg) { try { String msgText; if (msg instanceof TextMessage) { msgText = ((TextMessage)msg).getText(); } else { msgText = msg.toString(); } System.out.println("Message Received: "+ msgText ); if (msgText.equalsIgnoreCase("quit")) { synchronized(this) { quit = true; this.notifyAll(); // Notify main thread to quit } } } catch (JMSException jmse) { System.err.println("An exception occurred: "+jmse.getMessage()); } } /** * Creates all the necessary objects for receiving * messages from a JMS queue. * * @param ctx JNDI initial context * @param queueName name of queue * @exception NamingException if operation cannot be performed * @exception JMSException if JMS fails to initialize due to internal error */ public void init(Context ctx, String queueName) throws NamingException, JMSException { qconFactory = (QueueConnectionFactory) ctx.lookup(JMS_FACTORY); qcon = qconFactory.createQueueConnection(); qsession = qcon.createQueueSession(false, Session.AUTO_ACKNOWLEDGE); queue = (Queue) ctx.lookup(queueName); qreceiver = qsession.createReceiver(queue); qreceiver.setMessageListener(this); qcon.start(); } /** * Closes JMS objects. * @exception JMSException if JMS fails to close objects due to internal error */ public void close()throws JMSException { qreceiver.close(); qsession.close(); qcon.close(); } /** * main() method. * * @param args WebLogic Server URL * @exception Exception if execution fails */ public static void main(String[] args) throws Exception { if (args.length != 1) { System.out.println("Usage: java examples.jms.queue.QueueReceive WebLogicURL"); return; } InitialContext ic = getInitialContext(args[0]); QueueReceive qr = new QueueReceive(); qr.init(ic, QUEUE); System.out.println( "JMS Ready To Receive Messages (To quit, send a \"quit\" message)."); // Wait until a "quit" message has been received. synchronized(qr) { while (! qr.quit) { try { qr.wait(); } catch (InterruptedException ie) {} } } qr.close(); } private static InitialContext getInitialContext(String url) throws NamingException { Hashtable env = new Hashtable(); env.put(Context.INITIAL_CONTEXT_FACTORY, JNDI_FACTORY); env.put(Context.PROVIDER_URL, url); return new InitialContext(env); } } 2. How to Use This Class 2.1 From the file system on Linux This section describes how to use the class from the file system of a WebLogic Server installation. Log in to a machine with a WebLogic Server installation and create a directory to contain the source and code matching the package name, e.g. span$HOME/examples/jms/queue. Copy the above QueueReceive.java file to this directory. Set the CLASSPATH and environment to match the WebLogic server environment. Go to $MIDDLEWARE_HOME/user_projects/domains/base_domain/bin and execute . ./setDomainEnv.sh Collect the following information required to run the script: The JNDI name of the JMS queue to use In the WebLogic server console > Services > Messaging > JMS Modules > Module name, (e.g. TestJMSModule) > JMS queue name, (e.g. TestJMSQueue) select the queue and note its JNDI name, e.g. jms/TestJMSQueue The JNDI name of the connection factory to use to connect to the queue Follow the same path as above to get the connection factory for the above queue, e.g. TestConnectionFactory and its JNDI name e.g. jms/TestConnectionFactory The URL and port of the WebLogic server running the above queue Check the JMS server for the above queue and the managed server it is targeted to, for example soa_server1. Now find the port this managed server is listening on, by looking at its entry under Environment > Servers in the WLS console, e.g. 8001 The URL for the server to be passed to the QueueReceive program will therefore be t3://host.domain:8001 e.g. t3://jbevans-lx.de.oracle.com:8001 Edit Queue Receive .java and enter the above queue name and connection factory respectively under ... public final static String JMS_FACTORY="jms/TestConnectionFactory"; ... public final static String QUEUE="jms/TestJMSQueue"; ... Compile Queue Receive .java using javac Queue Receive .java Go to the source’s top-level directory and execute it using java examples.jms.queue.Queue Receive t3://jbevans-lx.de.oracle.com:8001 This will print a message that it is ready to receive messages or to send a “quit” message to end. The program will read all messages in the queue and print them to the standard output until it receives a message with the payload “quit”. 2.2 From JDeveloper The steps from JDeveloper are the same as those used for the previous program QueueSend.java, which is used to send a message to the queue. So we won't repeat them here. Please see the previous blog post at JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue and apply the same steps in that example to the QueueReceive.java program. This concludes the example. In the following post we will create a BPEL process which writes a message based on an XML schema to the queue.

Search Results

Search found 9822 results on 393 pages for 'hottest articles'.

Page 389/393 | < Previous Page | 385 386 387 388 389 390 391 392 393 | Next Page >

- by DigitalGeekery

- by Matthew Guay

- by Matthew Guay

- by Matthew Guay

- by Rick Strahl

- by DigitalGeekery

- by Mysticgeek

- by Matthew Guay

- by Bil Simser

- by Matthew Guay

- by DigitalGeekery

- by DigitalGeekery

- by The Geek

- by Brian T. Jackett

- by Matthew Guay

- by Simon Thorpe

- by Trevor Bekolay

- by Trevor Bekolay

- by mbcrump

- by Steven Chan (Oracle Development)

- by John-Brown.Evans

< Previous Page | 385 386 387 388 389 390 391 392 393 | Next Page >