Search Results

Search found 3040 results on 122 pages for 'bes express'.

Page 39/122 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• wifi problems with lenovo g580 on kubuntu-13.04-desktop-amd64

  - by user203963

  i have a wifi connection problem in lenovo g580 on kubuntu-13.04-desktop-amd64. ethernet cable is working properly but wifi does'nt connect below are some hardware information sudo lshw -class network gives *-network description: Ethernet interface product: AR8162 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 10 serial: 20:89:84:3d:e9:10 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=alx driverversion=1.2.3 duplex=full firmware=N/A ip=192.168.0.106 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:90500000-9053ffff ioport:2000(size=128) *-network description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:17 memory:90400000-90403fff *-network description: Wireless interface physical id: 3 logical name: wlan0 serial: 68:94:23:fa:2c:d9 capabilities: ethernet physical wireless configuration: broadcast=yes driver=brcmsmac driverversion=3.8.0-19-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bgn lsubs gives Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0489:e032 Foxconn / Hon Hai Bus 002 Device 003: ID 04f2:b2e2 Chicony Electronics Co., Ltd lspci gives 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 10) 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Does anyone knows the solution? rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 2: ideapad_wlan: Wireless LAN Soft blocked: yes Hard blocked: no 3: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• OpenSSL Versions in Solaris

  - by darrenm

  Those of you have have installed Solaris 11 or have read some of the blogs by my colleagues will have noticed Solaris 11 includes OpenSSL 1.0.0, this is a different version to what we have in Solaris 10.  I hope the following explains why that is and how it fits with the expectations on binary compatibility between Solaris releases. Solaris 10 was the first release where we included OpenSSL libraries and headers (part of it was actually statically linked into the SSH client/server in Solaris 9).  At time we were building and releasing Solaris 10 the current train of OpenSSL was 0.9.7.  The OpenSSL libraries at that time were known to not always be completely API and ABI (binary) compatible between releases (some times even in the lettered patch releases) though mostly if you stuck with the documented high level APIs you would be fine.   For this reason OpenSSL was classified as a 'Volatile' interface and in Solaris 10 Volatile interfaces were not part of the default library search path which is why the OpenSSL libraries live in /usr/sfw/lib on Solaris 10.  Okay, but what does Volatile mean ? Quoting from the attributes(5) man page description of Volatile (which was called External in older taxonomy): Volatile interfaces can change at any time and for any reason. The Volatile interface stability level allows Sun pro- ducts to quickly track a fluid, rapidly evolving specif- ication. In many cases, this is preferred to providing additional stability to the interface, as it may better meet the expectations of the consumer. The most common application of this taxonomy level is to interfaces that are controlled by a body other than Sun, but unlike specifications controlled by standards bodies or Free or Open Source Software (FOSS) communities which value interface compatibility, it can not be asserted that an incompatible change to the interface specifica- tion would be exceedingly rare. It may also be applied to FOSS controlled software where it is deemed more important to track the community with minimal latency than to provide stability to our customers. It also common to apply the Volatile classification level to interfaces in the process of being defined by trusted or widely accepted organization. These are generically referred to as draft standards. An "IETF Internet draft" is a well understood example of a specification under development. Volatile can also be applied to experimental interfaces. No assertion is made regarding either source or binary compatibility of Volatile interfaces between any two releases, including patches. Applications containing these interfaces might fail to function properly in any future release. Note that last paragraph!  OpenSSL is only one example of the many interfaces in Solaris that are classified as Volatile.  At the other end of the scale we have Committed (Stable in Solaris 10 terminology) interfaces, these include things like the POSIX APIs or Solaris specific APIs that we have no intention of changing in an incompatible way.  There are also Private interfaces and things we declare as Not-an-Interface (eg command output not intended for scripting against only to be read by humans). Even if we had declared OpenSSL as a Committed/Stable interface in Solaris 10 there are allowed exceptions, again quoting from attributes(5): 4. An interface specification which isn't controlled by Sun has been changed incompatibly and the vast majority of interface consumers expect the newer interface. 5. Not making the incompatible change would be incomprehensible to our customers. In our opinion and that of our large and small customers keeping up with the OpenSSL community is important, and certainly both of the above cases apply. Our policy for dealing with OpenSSL on Solaris 10 was to stay at 0.9.7 and add fixes for security vulnerabilities (the version string includes the CVE numbers of fixed vulnerabilities relevant to that release train).  The last release of OpenSSL 0.9.7 delivered by the upstream community was more than 4 years ago in Feb 2007. Now lets roll forward to just before the release of Solaris 11 Express in 2010. By that point in time the current OpenSSL release was 0.9.8 with the 1.0.0 release known to be coming soon.  Two significant changes to OpenSSL were made between Solaris 10 and Solaris 11 Express.  First in Solaris 11 Express (and Solaris 11) we removed the requirement that Volatile libraries be placed in /usr/sfw/lib, that means OpenSSL is now in /usr/lib, secondly we upgraded it to the then current version stream of OpenSSL (0.9.8) as was expected by our customers. In between Solaris 11 Express in 2010 and the release of Solaris 11 in 2011 the OpenSSL community released version 1.0.0.  This was a huge milestone for a long standing and highly respected open source project.  It would have been highly negligent of Solaris not to include OpenSSL 1.0.0e in the Solaris 11 release. It is the latest best supported and best performing version.     In fact Solaris 11 isn't 'just' OpenSSL 1.0.0 but we have added our SPARC T4 engine and the AES-NI engine to support the on chip crypto acceleration. This gives us 4.3x better AES performance than OpenSSL 0.9.8 running on AIX on an IBM POWER7. We are now working with the OpenSSL community to determine how best to integrate the SPARC T4 changes into the mainline OpenSSL.  The OpenSSL 'pkcs11' engine we delivered in Solaris 10 to support the CA-6000 card and the SPARC T1/T2/T3 hardware is still included in Solaris 11. When OpenSSL 1.0.1 and 1.1.0 come out we will asses what is best for Solaris customers. It might be upgrade or it might be parallel delivery of more than one version stream.  At this time Solaris 11 still classifies OpenSSL as a Volatile interface, it is our hope that we will be able at some point in a future release to give it a higher interface stability level. Happy crypting! and thank-you OpenSSL community for all the work you have done that helps Solaris.

  Read the article

• Can't start Psychonauts game -- segfault

  - by tremby

  This looks similar to Psychonauts Humble Indie Bundle V error but I don't have the ERROR message (missing GL capability) and its solution does not work for me. When trying to run Psychonauts from the Humble Indie Bundle on my x86_64 laptop running Ubuntu 12.04 I get the following output: <bjn@segnus:/usr/local/games/psychonauts>$ ./Psychonauts STUBBED: fix up the rest of the SSE code first at DetectSSESupport (/home/icculus/projects/psychonauts/Source/CommonLibs/DFMath/MathGeneral.cpp:32) STUBBED: write me? at SetPCLanguage (/home/icculus/projects/psychonauts/Source/game/luatest/UnixMain.cpp:120) STUBBED: fix up the rest of the SSE code first at DetectCPUCaps (/home/icculus/projects/psychonauts/Source/game/luatest/Game/PCGameApp.cpp:223) STUBBED: check LANG envr var at _GetDefaultGameLanguage (/home/icculus/projects/psychonauts/Source/game/luatest/Game/GameApp.cpp:171) Console created Save path: /home/bjn/.local/share/Psychonauts Write path: WorkResource STUBBED: inline asm at SSEMul_4x4_4x4_2arg (/home/icculus/projects/psychonauts/Source/CommonLibs/DFMath/Matrix.cpp:710) STUBBED: inline asm at SSEMul_4x4_4x4_3arg (/home/icculus/projects/psychonauts/Source/CommonLibs/DFMath/Matrix.cpp:698) ******** unit test failed ******** STUBBED: VK_* at InitInputNames (/home/icculus/projects/psychonauts/Source/CommonLibs/DirectX/SDLInput.cpp:1220) No joysticks detected Transport started DaveD: NCListenSocket: Listening on port 40001 SDL_SetVideoMode() failed: Failed loading libGL.so.1 Start Up completed in 0.06 seconds [1] 9718 segmentation fault (core dumped) ./Psychonauts <bjn@segnus:/usr/local/games/psychonauts>$ Output of lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 02:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 02:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:00.0 Network controller: Intel Corporation WiFi Link 5100 Any ideas?

  Read the article

• USB external drive is not recognized by any OS, how to troubleshoot in Ubuntu?

  - by Breno

  First of all I would like to inform you that I saw a question similar to mine but the error was different, so here's my problem... I have an external HD samsung s2 model of 500GB and a day to day just stopped working, tried in other systems (windows and mac) however are not recognized. In the windows device manager when I insert the usb it states that the device in question are not working properly. Well, in the logs of my ubuntu 4.12 I see the following message when I insert my usb device in: [ 2967.560216] usb 7-2: new full-speed USB device number 2 using uhci_hcd [ 2967.680182] usb 7-2: device descriptor read/64, error -71 [ 2967.904176] usb 7-2: device descriptor read/64, error -71 [ 2968.120227] usb 7-2: new full-speed USB device number 3 using uhci_hcd [ 2968.240207] usb 7-2: device descriptor read/64, error -71 [ 2968.464063] usb 7-2: device descriptor read/64, error -71 [ 2968.680087] usb 7-2: new full-speed USB device number 4 using uhci_hcd [ 2969.092085] usb 7-2: device not accepting address 4, error -71 [ 2969.208155] usb 7-2: new full-speed USB device number 5 using uhci_hcd [ 2969.624076] usb 7-2: device not accepting address 5, error -71 [ 2969.624118] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 4520.240340] usb 7-1: new full-speed USB device number 6 using uhci_hcd [ 4520.364079] usb 7-1: device descriptor read/64, error -71 [ 4520.588109] usb 7-1: device descriptor read/64, error -71 [ 4520.804140] usb 7-1: new full-speed USB device number 7 using uhci_hcd [ 4520.924136] usb 7-1: device descriptor read/64, error -71 [ 4521.148083] usb 7-1: device descriptor read/64, error -71 [ 4521.364105] usb 7-1: new full-speed USB device number 8 using uhci_hcd [ 4521.776237] usb 7-1: device not accepting address 8, error -71 [ 4521.888206] usb 7-1: new full-speed USB device number 9 using uhci_hcd [ 4522.296102] usb 7-1: device not accepting address 9, error -71 [ 4522.296150] hub 7-0:1.0: unable to enumerate USB device on port 1 [ 4749.036104] usb 7-2: new full-speed USB device number 10 using uhci_hcd [ 4749.156209] usb 7-2: device descriptor read/64, error -71 [ 4749.380215] usb 7-2: device descriptor read/64, error -71 [ 4749.596206] usb 7-2: new full-speed USB device number 11 using uhci_hcd [ 4749.716409] usb 7-2: device descriptor read/64, error -71 [ 4749.940110] usb 7-2: device descriptor read/64, error -71 [ 4750.156257] usb 7-2: new full-speed USB device number 12 using uhci_hcd [ 4750.572150] usb 7-2: device not accepting address 12, error -71 [ 4750.684215] usb 7-2: new full-speed USB device number 13 using uhci_hcd [ 4751.100182] usb 7-2: device not accepting address 13, error -71 [ 4751.100224] hub 7-0:1.0: unable to enumerate USB device on port 2 Here is my system: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 02:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5756ME Gigabit Ethernet PCI Express 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) Does anyone have any clue what would be the problem?

  Read the article

• Just re-installed Ubuntu 14.04, unstable wireless connection, Lenovo ThinkPad X200

  - by Mark Lawtie

  I re-installed Ubuntu 14.04 as I was having problems with unstable wireless connection... Following re-installation I am having the same problem: connection randomly dropping out, then reconnecting... all my other devices are running well when connected I am a bit of a computer novice so any help would be greatly appreciated... I am running Lenovo ThinkPad X200 laptop... Thanks! mark@mark-ThinkPad-X200:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection mark@mark-ThinkPad-X200:~$ mark@mark-ThinkPad-X200:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 026: ID 0a5c:2145 Broadcom Corp. BCM2045B (BDC-2.1) [Bluetooth Controller] Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub mark@mark-ThinkPad-X200:~$

  Read the article

• How to install Intel VGA drive..?

  - by Ary Catur Wicaksono

  how to install intel VGA drive..?? I've been searching on google but did not see too I've been trying to ask the ubuntu forum in Indonesia. but they did not reply my post.. is there anything that can help me? *I am sorry my English is rather chaotic arthur@Chunx:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) arthur@Chunx:~$ sudo lshw -c display [sudo] password for arthur: *-display description: VGA compatible controller product: 82G33/G31 Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 10 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff arthur@Chunx:~$ sudo apt-get install xserver-xorg-video-intel Sedang membaca daftar paket... Selesai Membangun pohon ketergantungan Membaca informasi yang tersedia... Selesai xserver-xorg-video-intel telah berada dalam versi terbaru. 0 dimutakhirkan, 0 baru terinstal, 0 akan dihapus dan 190 tidak akan dimutakhirkan.

  Read the article

• Atheros Wireless card shows up as two different models?

  - by geermc4

  Hi I've been fighting these wireless drivers for a few days and just recently i noticed that the model the Wireless controller appears in lspci is different sometimes. This is the data i have after installing Ubuntu Server 64 bit ~# lspci -k .... 04:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: AzureWave Device 1d89 Kernel driver in use: ath9k Kernel modules: ath9k ran some updates, restarted, all was good, all though it did say that linux-headers-server linux-image-server linux-server where beeing kept back. After that i installed ubuntu-desktop (aptitude install ubuntu-desktop --without-recommends) restarted and not only is the wireless not working anymore, but the hardware is listed as a different card ~# lspci -k .... 04:00.0 Ethernet controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) has no available drivers for it, still i tried to modprobe ath9k, they show up in lsmod as loaded, but still iw list shows nothing. this is what it looked like before the ubuntu-desktop instalation Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 2412 MHz [1] (14.0 dBm) * 2417 MHz [2] (15.0 dBm) * 2422 MHz [3] (15.0 dBm) * 2427 MHz [4] (15.0 dBm) * 2432 MHz [5] (15.0 dBm) * 2437 MHz [6] (15.0 dBm) * 2442 MHz [7] (15.0 dBm) * 2447 MHz [8] (15.0 dBm) * 2452 MHz [9] (15.0 dBm) * 2457 MHz [10] (15.0 dBm) * 2462 MHz [11] (15.0 dBm) * 2467 MHz [12] (15.0 dBm) (passive scanning) * 2472 MHz [13] (14.0 dBm) (passive scanning) * 2484 MHz [14] (17.0 dBm) (passive scanning) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x1 RX 0x3 Configured Antennas: TX 0x1 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor interface combinations are not supported Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * connect * disconnect Supported TX frame types: * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 Supported RX frame types: * IBSS: 0x00d0 * managed: 0x0040 0x00d0 * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * mesh point: 0x00b0 0x00c0 0x00d0 * P2P-client: 0x0040 0x00d0 * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 Device supports RSN-IBSS. What's with the hardware change? If it has 2, how can i make the AR9285 always load and disable AR5008, or, is it the same and it's just showing it different? :| Oh and I've tried this on Ubuntu 10.04 server, xubuntu 12.04, ubuntu 12.04 desktop and server. Thanks in advanced. -- Here's some more info, i have it setup in 2 hard drives, 1 works and the other one i'm using to figure it out The one that works... # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.147 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 01 serial: 74:2f:68:4a:26:73 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-18-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:fea00000-fea0ffff Here's where it doesn't # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.160 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network UNCLAIMED description: Ethernet controller product: AR5008 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fea00000-fea0ffff Update I've noticed that if i blacklist the ath9k and ath9k_common modules lspci gives me the AR9285, but then I need to modprobe ath9k for it to work, does this make any sense? If so, why?

  Read the article

• Can't get Wireless to work! (Fujitsu siemens ESPRIMO Mobile u9200) Ubuntu 12.4

  - by Martin Oscarsson

  I can't get wireless to work on my computer. I have recently installed 12.04. Computer name: (Fujitsu siemens ESPRIMO Mobile u9200) Hardware button starts bluetooth - so can't start that way. Have searched the Internet for help but can't find any on my specific problem! State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath5k State: disconnected Default: no *-network beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. HERE IS ALL THE NETWORK INFO: ellika@ellikas:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13778 errors:0 dropped:0 overruns:0 frame:0 TX packets:9510 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14022669 (14.0 MB) TX bytes:1001621 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig [sudo] password for ellika: eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13801 errors:0 dropped:0 overruns:0 frame:0 TX packets:9528 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14024965 (14.0 MB) TX bytes:1002836 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ phy0 Wireless LAN phy0: command not found ellika@ellikas:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.4-1ubuntu2 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm ellika@ellikas:~$ sudo rf-kill unblock all sudo: rf-kill: kommandot hittades inte ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sedan sudo ifconfig wlan0 sedan: command not found ellika@ellikas:~$ sudo ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:22:5f:3f:63:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ellika@ellikas:~$ ^C ellika@ellikas:~$ ^C ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" ^[[C^[[C^[[C^[[C^[[C^[[B wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.4 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.451/10.517/10.631/0.062 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux ellika@ellikas:~$ ellika@ellikas:~$ clear ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.5 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.476/10.522/10.602/0.045 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux

  Read the article

• Application Module Extension in Oracle Application R12

  - by Manoj Madhusoodanan

  In this blog I will describe how to Extend Application Module.I will explain this based on my previous blog PL/SQL based EO.  I want to extend FndUserAM to add a procedure to raise a custom business event when the FND_USER has created successfully. Here I am using a custom business event "xxcust.oracle.apps.demo_event". Please find the code used in Business Event. TablePackage Following steps needs to perform. 1) Download all files pertaining to "Entity Object Based on PL/SQL" to JDEV_USER_HOME/myprojects and JDEV_USER_HOME/myclasses.If you want to see the content of source java file decompile it and save it in JDEV_USER_HOME/myprojects. 2) Create XXFndUserAM as follows. 3) Add following method to XXFndUserAMImpl.    import oracle.apps.fnd.framework.OAException;   import oracle.apps.fnd.framework.server.OADBTransactionImpl;   import oracle.apps.fnd.wf.bes.BusinessEvent;   import oracle.apps.fnd.wf.bes.BusinessEventException;    import java.sql.Connection;     public void raiseEvent(String userName) {        String eventName = "xxcust.oracle.apps.demo_event";        String eventKey = userName;        Connection conn = ((OADBTransactionImpl)getOADBTransaction()).getJdbcConnection();         BusinessEvent event = null;         try{             event = new BusinessEvent(eventName, eventKey);             /* Setting Parameters */             event.setStringProperty("USER_NAME",userName);             event.setStringProperty("STATUS","User has created sucessfully");             event.raise(conn);             }             catch (BusinessEventException e) {                 throw new OAException("Exception occured when invoking web service - "+e.getMessage());             }             getOADBTransaction().commit();    } 4) Create a controller which extends from xxcust.oracle.apps.fnd.user.webui.CreateFndUserCO.Call raiseEvent method from new controller. 5) Create substitution for FndUserAM. 6) Migrate following files to $JAVA_TOP. xxcustom.oracle.apps.fnd.user.server.FndUserAMImpl.javaxxcustom.oracle.apps.fnd.user.server.XXFndUserAM.xmlxxcustom.oracle.apps.fnd.user.webui.XXCreateFndUserCO.java 8) Migrate the substitution. 9) Restart the server. 10) Personalize the page /xxcust/oracle/apps/fnd/user/webuiCreateFndUserPG and set the new controller. 11) Verify the substitution has properly applied by clicking About the Page. 12) Access the page and create a user. You can the the result of the Business Event.

  Read the article

• No network connectivity (not wired or wireless) - RT5390

  - by Ben Udy

  I am starting to think I simply need to accept a small loss and sell my new ASUS K73E. Because I really don't enjoy computing when I have to deal with Windough$ and this windows 7 64 bit on my new ASUS is even worse than the old machines with XP. I have written to ASUS and they simply say "We don't support Linux" and while Ralink's website says they do support Linux I can't get anyone to tell me what model Ralink card might be in my machine. Is anyone out there who might be able to give me some useful advice???? Here is the answer to command lspci nn && lsusb && lsmod && rfkill list all: di,snd_seq snd 54244 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device uvcvideo 57374 0 videodev 34361 1 uvcvideo v4l1_compat 13251 2 uvcvideo,videodev soundcore 6620 1 snd snd_page_alloc 7076 2 snd_hda_intel,snd_pcm psmouse 63677 0 serio_raw 3978 0 lp 7028 0 parport 32635 2 ppdev,lp fbcon 35102 71 tileblit 1999 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit video 17375 0 output 1871 1 video vga16fb 11385 1 vgastate 8961 1 vga16fb ahci 32360 2 di,snd_seq snd 54244 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device uvcvideo 57374 0 videodev 34361 1 uvcvideo v4l1_compat 13251 2 uvcvideo,videodev soundcore 6620 1 snd snd_page_alloc 7076 2 snd_hda_intel,snd_pcm psmouse 63677 0 serio_raw 3978 0 lp 7028 0 parport 32635 2 ppdev,lp fbcon 35102 71 tileblit 1999 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit video 17375 0 output 1871 1 video vga16fb 11385 1 vgastate 8961 1 vga16fb ahci 32360 2 Edit #2 lspci 00:00.0 Host bridge: Intel Corporation Device 0104 (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Device 0116 (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Device 1c49 (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 02:00.0 Network controller: RaLink Device 5390 03:00.0 Ethernet controller: Atheros Communications Device 1083 (rev c0) lsusb Bus 002 Device 002: ID 8087:0024 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 13d3:5710 IMC Networks Bus 001 Device 002: ID 8087:0024 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Thanks for the suggestion because this gave me a model for Ralink RT5390. I have now gone to Ralink.com and downloaded (via Windows 7) the driver package (it is a bz2 file). I hope I can figure out how to install it. And FYI - I was not able to run su (not authorized?) and dmidecode didn't exist (probably needs to be downloaded BUT no internet yet in Ubuntu)

  Read the article

• Investigating a big C++ project from its source code [closed]

  - by user827992

  Possible Duplicate: What is the best method to start understanding BIG project source code? I have a project that I would like to dissect to learn something new from it. This project is about 200 megabytes. For me, it is just impossible to open every cpp and hpp file and read each and every one. I also don't know what is the best approach in this case. Many people on the internet are looking for an UML tool to generate some kind of graph. I think that UML works well when you are starting a project and you want to express the business logic of your classes and methods. In my opinion UML is totally useless when studying a project only from its source code. Also UML is an OO language, in a large sized C++ project I find a lot of stuff that is not an object and can express some other kind of paradigm. Can you name a tool or a class of software that can help with this?

  Read the article

• Lubuntu wireless issue with Broadcom chipset

  - by Variant Web Solutions

  I'm a web dev that just started a new venture in buying wiped laptops in bulk and selling them at a low cost to lower income families that want a laptop that will simply preform and not become virus ridden and require constant maintenance, so naturally I opted for a linux distro and after some research, lubuntu was my top pick. I'm not a stranger to linux as all of my servers for my web dev business are linux, but I am however new to L/Ubuntu and I'm having some issues with both wifi (broadcom chipsets) on the 20 or so dells that I have right now, D800's, D810's and E5400's. Not sure if you can point me in a solid direction, I've scoured (and implemented) the suggestions on ask ubuntu and still coming up short. On one of the e5400's ( though they all seem to suffer the same errors) I got the following: [code]dell-latitude-e5400@dell-Latitude-E5400:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. dell-latitude-e5400@dell-Latitude-E5400:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 02:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe (rev 10) dell-latitude-e5400@dell-Latitude-E5400:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.5-1ubuntu1 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm nfc dell-latitude-e5400@dell-Latitude-E5400:~$ [/code]

  Read the article

• Intel Centrino Wireless-N 1000 Again ! Ubuntu 13.04 x64

  - by vafa

  First I have to say that I tried everything written about this concept. The problem is that it stops working randomly in 3 main forms : 1 - sometimes it disconnect from wireless network and reconnect automatically 2 - sometimes it disconnect and wont connect no matter what (needs reboot) 3 - some times it's still connected but cannot ping or surf or whatever. I already tried disabling N mod using these commands : sudo modprobe -r iwlwifi modprobe iwlwifi 11n_disable=1 (or 0, whatever) it didn't help . these are the results of lspci, sudo lshw -C network, ifconfig, iwconfig, rfkill list when it disconnected and didn't connect till reboot : ifconfig : eth0 Link encap:Ethernet HWaddr c8:0a:a9:34:65:77 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1563213476557380 errors:9379306629148050 dropped:3126435543049350 overruns:1563217771524675 frame:7816088857623375 TX packets:1563217771524675 errors:6252871086098700 dropped:0 overruns:1563217771524675 carrier:3126435543049350 collisions:7816088857623375 txqueuelen:1000 RX bytes:1563217771524675 (1.5 PB) TX bytes:1563217771524675 (1.5 PB) ham0 Link encap:Ethernet HWaddr 7a:79:19:a5:e4:93 inet addr:25.165.228.147 Bcast:25.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:19ff:fea5:e493/64 Scope:Link inet6 addr: 2620:9b::19a5:e493/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:7743 errors:0 dropped:0 overruns:0 frame:0 TX packets:1250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:665642 (665.6 KB) TX bytes:204056 (204.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:41138 errors:0 dropped:0 overruns:0 frame:0 TX packets:41138 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6420962 (6.4 MB) TX bytes:6420962 (6.4 MB) wlan0 Link encap:Ethernet HWaddr 00:1e:64:45:fb:70 inet6 addr: fe80::21e:64ff:fe45:fb70/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:286999 errors:0 dropped:0 overruns:0 frame:0 TX packets:226966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:324386887 (324.3 MB) TX bytes:30674804 (30.6 MB) iwconfig : ham0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off sudo lshw -C network: *-network description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:45:fb:70 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-30-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:46 memory:c0400000-c0401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: c0 serial: c8:0a:a9:34:65:77 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:c0900000-c093ffff ioport:5000(size=128) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:19:a5:e4:93 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full ip=25.165.228.147 link=yes multicast=yes port=twisted pair speed=10Mbit/s lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce G 105M] (rev a1) 07:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] 09:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0) rfkill list : 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 9: phy0: Wireless LAN Soft blocked: no Hard blocked: no any help will be REALLLYYYY appreciated

  Read the article

• A Virtual(Box) Christmas!

  - by Gilles Gravier

  Hello and merry Christmas everybody!Yes. This year, it's a v4.0 Xmas! VirtualBox just came out with a new major version release. Version 4.0 is available at : http://www.virtualbox.org/wiki/Downloads ... and of course, it's open source, and it's free. And I suggest (strongly) that you also download the free Extension Pack from the same page... Brings USB 2.0 emulation and more!I upgraded the version on my Solaris Express (get that from : http://www.oracle.com/solaris/index.html and follow the Download Solaris Express link on the right) laptop (pfexec pkgrm SUNWvbox and then pfexec pkgadd -d the .pkg in the compressed archive file, and install the extensions from the VBox GUI once it's launched). If you are on an old fashion OS without proper RBAC, replace pfexec by sudo. Which you can also do on Solaris if you really want to. :)I tell you, it's Christmas, for sure!Merry VBox!Gilles.

  Read the article

• Publishing Websites From VS.NET 2013 to Azure

  - by D'Arcy Lussier

  Originally posted on: http://geekswithblogs.net/dlussier/archive/2013/10/24/154459.aspxScott Gu recently announced the release of the Azure SDK 2.2. This includes a tonne of new features for accessing Azure resources from within Visual Studio 2013. You can read Scott’s blog post here. One feature is integrated Windows Azure sign in from within Visual Studio. I put a short video together showing how easy it is to publish a web application to Azure Websites. You can check it out here: http://youtu.be/eiuhJbwhZsQ (I couldn’t get it to display properly by embedding, definitely needs the wide-screen 720p view for best viewing) And yes, you can access James Chambers Karaoke Fansite live on Azure! Resources: Azure SDK 2.2 https://www.windowsazure.com/en-us/develop/net/ VS.NET 2013 Express http://www.microsoft.com/visualstudio/eng/downloads#d-2013-express

  Read the article

• Attending MySQL Connect? Your Opinion Matters.

  - by Monica Kumar

  Take the MySQL Connect 2012 Survey Thanks to everyone who is at the first ever MySQL Connect Conference in San Francisco this weekend! Don't forget to take your Conference and Session Surveys. Your opinions help shape next year's conference. Take a survey for each of the sessions you attend and be entered into a drawing for one prize for $200 American Express Gift Certificate. Fill in the daily conference survey and be entered into a drawing for one prize for a $500 American Express Gift Card Surveys are located here. Make your opinion count! Take the survey now. Congratulations to Robin Schumacher from DataStax as he is the winner of the Saturday survey!

  Read the article

• After startup, display reverts to one desktop duplicated on both screens

  - by Skilldrick

  I have a Samsung R530 laptop. I'm actually running Linux Mint, which is based on Ubuntu (which is why I thought it would be OK to post this here). I'm now getting exactly the same problem on Ubuntu 10.10. I've got it setup with a secondary LCD monitor, and I've changed the display settings so the laptop screen and monitor are at optimal resolution, with the desktop shared between them. After startup though (typically around 10-30 seconds) the display reverts to 1024 x 768 on both screens, and the display is duplicated (i.e. both screens show the same thing). I think this is something to do with my video card, as I had the same problem when I was running Arch Linux. Any ideas? Edit: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller It seems it's Intel, not Nvidia. I have a current work around, which is to have a launcher to a script containing xrandr --output LVDS1 --mode 1366x768 --output HDMI1 --mode 1280x1024 --left-of LVDS1 on my desktop, and to run it after the displays revert, but it's not ideal.

  Read the article

• Apprenda Offers Free Downloadable Version of SaaS Application Server

  SaaSGrid Express makes it easy to deploy .Net application through a software as a service model.

  Read the article

• Apprenda Offers Free Downloadable Version of SaaS Application Server

  SaaSGrid Express makes it easy to deploy .Net application through a software as a service model.

  Read the article

• 13.10 upgrade dropping wifi [on hold]

  - by Daryl

  Almost a complete newb here. After my last upgrade from 12.04 to 13.10 my wifi now randomly drops. The only way I can get a signal back is a shutdown and restart otherwise it shows no network is even available to connect to. Had no problems until the upgrade. Any help would be appreciated. H/W path Device Class Description ==================================================== system h8-1534 (H2N64AA#ABA) /0 bus 2AC8 /0/0 memory 64KiB BIOS /0/4 processor AMD FX(tm)-6200 Six-Core Processor /0/4/5 memory 288KiB L1 cache /0/4/6 memory 6MiB L2 cache /0/4/7 memory 8MiB L3 cache /0/d memory 10GiB System Memory /0/d/0 memory DIMM Synchronous [empty] /0/d/1 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/2 memory 2GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/3 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B) /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU) /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B) /0/100/2/0 display Turks PRO [Radeon HD 7570] /0/100/2/0.1 multimedia Turks/Whistler HDMI Audio [Radeon HD 6000 Series] /0/100/5 bridge RD890 PCI to PCI bridge (PCI express gpp port E) /0/100/5/0 bus TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [RAID5 mode] /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/14 bus SBx00 SMBus Controller /0/100/14.2 multimedia SBx00 Azalia (Intel HDA) /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller /0/100/14.4 bridge SBx00 PCI to PCI Bridge /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) /0/100/15.1 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) /0/100/15.2 bridge SB900 PCI to PCI bridge (PCIE port 2) /0/100/15.2/0 wlan0 network RT3290 Wireless 802.11n 1T/1R PCIe /0/100/15.2/0.1 generic RT3290 Bluetooth /0/100/15.3 bridge SB900 PCI to PCI bridge (PCIE port 3) /0/100/15.3/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/101 bridge Family 15h Processor Function 0 /0/102 bridge Family 15h Processor Function 1 /0/103 bridge Family 15h Processor Function 2 /0/104 bridge Family 15h Processor Function 3 /0/105 bridge Family 15h Processor Function 4 /0/106 bridge Family 15h Processor Function 5 /0/1 scsi0 storage /0/1/0.0.0 /dev/sda disk 1TB WDC WD1002FAEX-0 /0/1/0.0.0/1 volume 189MiB Windows FAT volume /0/1/0.0.0/2 /dev/sda2 volume 244MiB data partition /0/1/0.0.0/3 /dev/sda3 volume 931GiB LVM Physical Volume /0/2 scsi2 storage /0/2/0.0.0 /dev/cdrom disk DVD A DH16ACSHR /0/3 scsi6 storage /0/3/0.0.0 /dev/sdb disk SCSI Disk /0/3/0.0.1 /dev/sdc disk SCSI Disk /0/3/0.0.2 /dev/sdd disk SCSI Disk /0/3/0.0.3 /dev/sde disk MS/MS-Pro /0/3/0.0.3/0 /dev/sde disk /1 power Standard Efficiency I apologize for my newbness. I hope this is enough info for the hardware. Thanks Bruno for pointing out I needed to add more info. If I am lacking anything else please let me know and I'll post it.

  Read the article

• How to debug JavaScript in Visual studio 2010

  - by anirudha

  here is a little trick to debug the JavaScript inside Visual studio or express edition of VWD get all included office updates  from Microsoft updates install them. enable the script debugger for IE or others inside internet explorer go to IE > internet options > advance > browsing open a website in Visual studio or express put the breakpoint in JavaScript code and run them after setting as default browser internet explorer. when the breakpoint function called he automatically show you all about the code you breakpoint. you can also change them and find the result in browser. for advance debugging their are many option already known in visual studio work same as C# debugging like Advanced Window, Local  , watch you can use all these 3 window for JavaScript debugging.

  Read the article

• PCIe 3.0 Specification Coming Soon

  The PCI Express 3.0 specification will finally be released in the third quarter, but don't expect products for another year or so.

  Read the article

• Wifi problems with Ubuntu 13.10

  - by Sparrowhawk4

  I should probably say straight off that I am brand new to Ubuntu. I installed 13.10 alongside Windows 7 a couple of days ago and I've managed to clear up all the little problems, apart from with the wifi. My internet is fine using an ethernet cable. I can connect to the wifi, and it tells me that the signal is good, but for the vast majority of the time I can't load anything, and system monitor tells me that I am sending and receiving nothing. The problem is somewhere in Ubuntu. It works fine on Windows 7, my Android phone and all of my flatmates laptops. I know I'm not the only one with this problem, but the fixes I've seen either don't work or I don't understand them enough to carry them out. Help? EDIT: from lspci command as requested 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller (rev 10) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

  Read the article

• Security: "Creating Custom Authentication"

  Build single sign-on/sign-off for a suite of applications in Oracle Application Express.

  Read the article

• "The Power of Two", Oracle Magazine, May/June 2008, Technology

  Use Oracle SQL Developer to aid Oracle Application Express development.

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >