Search Results

Search found 2050 results on 82 pages for 'c 03'.

Page 39/82 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• Linux server apache httpd processes take i/o wait to close to 100% and lock down server

  - by user3682065

  For about 5 days now, and seemingly out of the blue, my linux server has started locking up from time to time. The pattern is always the same as far as I can tell from top and iotop commands around the time it starts happening: One or more httpd processes (usually one) hang and start using up 100% of CPU power, the %wa goes close to 100% and in the iotop I see several httpd processes with 99.99% in the IO column. I'm also running an SVN server on this machine through apache and the one way that I've been consistently able to reproduce this is to do an SVN commit of new files or an SVN update from the repository on this server (I am the only one using this SVN repository). This will always reproduce this scenario successfully, but until very recently I had no problems at all checking in/out of SVN. But sometimes it just happens for no detectable reason at all it seems. So it seems like there is some issue with my Apache that leads it to have processes use up a lot of read/write upon certain triggers. I was wondering if anyone could help me uncover that issue. EDIT: OK now it's happening again: This is top: [root@server ~]# top top - 10:56:54 up 2:59, 5 users, load average: 171.46, 70.35, 27.01 Tasks: 328 total, 2 running, 326 sleeping, 0 stopped, 0 zombie Cpu(s): 1.9%us, 2.0%sy, 0.0%ni, 0.0%id, 96.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2021144k total, 1968192k used, 52952k free, 2500k buffers Swap: 4194288k total, 2938584k used, 1255704k free, 39008k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10390 apache 20 0 2774m 936m 6200 D 2.0 47.4 1:52.27 httpd 2149 root 20 0 927m 13m 1040 S 0.7 0.7 1:50.46 namecoind 11 root 20 0 0 0 0 R 0.3 0.0 0:30.10 events/0 23 root 20 0 0 0 0 S 0.3 0.0 0:17.88 kblockd/1 2049 root 20 0 382m 4932 2880 D 0.3 0.2 0:03.67 httpd 2144 root 20 0 1702m 69m 1164 S 0.3 3.5 5:19.68 bitcoind 6325 root 20 0 15164 1100 656 R 0.3 0.1 0:11.09 top 10311 apache 20 0 387m 9496 7320 D 0.3 0.5 0:01.89 httpd 10313 apache 20 0 391m 10m 7364 D 0.3 0.5 0:02.40 httpd 10466 apache 20 0 399m 12m 7392 D 0.3 0.7 0:02.41 httpd 10599 apache 20 0 391m 9324 7340 D 0.3 0.5 0:00.15 httpd 10628 apache 20 0 384m 7620 4052 D 0.3 0.4 0:00.01 httpd 10633 apache 20 0 384m 7048 3504 D 0.3 0.3 0:00.01 httpd 10634 apache 20 0 384m 8012 4048 D 0.3 0.4 0:00.02 httpd 10638 apache 20 0 400m 22m 9.8m D 0.3 1.1 0:01.93 httpd 10640 apache 20 0 385m 8288 4028 D 0.3 0.4 0:00.03 httpd 10641 apache 20 0 401m 21m 6376 D 0.3 1.1 0:01.45 httpd 10759 apache 20 0 385m 8816 3480 D 0.3 0.4 0:01.45 httpd 10773 apache 20 0 384m 8044 3464 D 0.3 0.4 0:00.02 httpd This is an iotop snapshot: Total DISK READ: 5.93 M/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 10732 be/4 apache 3.76 K/s 0.00 B/s 0.00 % 58.48 % httpd 876 be/3 root 0.00 B/s 52.68 K/s 0.00 % 52.98 % [jbd2/dm-1-8] 10906 be/4 root 124.17 K/s 0.00 B/s 0.00 % 23.03 % sh -c [ -x /usr/local/psa/admin/sbin/backupmng ] && /usr/local/psa/admin/sbin/backupmng >/dev/null 2>&1 2156 be/4 root 206.94 K/s 0.00 B/s 0.00 % 21.15 % bitcoind 10904 be/4 mysql 0.00 B/s 0.00 B/s 0.00 % 18.94 % mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --log-error=/var/log/mysqld.log --pid-file=/var/run/mysqld/mysqld.pid --socket=/var/lib/mysql/mysql.sock 10773 be/4 apache 7.53 K/s 0.00 B/s 0.00 % 14.77 % httpd 10641 be/4 apache 15.05 K/s 0.00 B/s 0.00 % 11.57 % httpd 10399 be/4 apache 1057.29 K/s 0.00 B/s 43.16 % 10.56 % httpd 10682 be/4 sw-cp-se 158.03 K/s 0.00 B/s 0.00 % 7.45 % sw-engine-cgi -c /usr/local/psa/admin/conf/php.ini -d auto_prepend_file=auth.php3 -u psaadm 10774 be/4 apache 3.76 K/s 0.00 B/s 0.00 % 6.53 % httpd 10624 be/4 apache 0.00 B/s 0.00 B/s 0.00 % 5.53 % httpd 10356 be/4 apache 899.26 K/s 0.00 B/s 35.52 % 4.01 % httpd 10795 be/4 apache 0.00 B/s 0.00 B/s 0.00 % 3.93 % httpd 10804 be/4 apache 7.53 K/s 0.00 B/s 0.00 % 3.08 % httpd 4379 be/4 root 2.89 M/s 0.00 B/s 99.99 % 0.00 % namecoind 10619 be/4 apache 462.80 K/s 0.00 B/s 7.80 % 0.00 % httpd 10636 be/4 apache 3.76 K/s 0.00 B/s 0.00 % 0.00 % httpd 10716 be/4 mysql 105.35 K/s 0.00 B/s 5.92 % 0.00 % mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --log-error=/var/log/mysqld.log --pid-file=/var/run/mysqld/mysqld.pid --socket=/var/lib/mysql/mysql.sock 1988 be/4 root 18.81 K/s 0.00 B/s 0.00 % 0.00 % spamd_full.sock I also ran lsof -p for pid 10390 which was way up top under the top command and this is the bottom line where I can sort of see what request this was and it says CLOSE_WAIT: httpd 10390 apache 34u IPv6 315879 0t0 TCP default-domain.com:https->crawl-66-249-65-91.googlebot.com:42907 (CLOSE_WAIT) I'm still not sure what exactly is causing this all to happen though? I killed that service but %wa and load average remain high, I also stopped mysqld and other services. It really only goes down once I stop httpd altogether, and even then I can't start it without finding remaining hanging httpd processes via "netstat -tulpn", killing those or doing "killall -9 httpd" and after waiting a while for it to cycle through all those then doing /etc/init.d/httpd start

  Read the article

• SSH as root using public key still prompts for password on RHEL 6.1

  - by Dean Schulze

  I've generated rsa keys with cygwin ssh-keygen and copied them to the server with ssh-copy-id -i id_rsa.pub [email protected] I've got the following settings in my /etc/ssh/sshd_config file RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys PermitRootLogin yes When I ssh [email protected] it still prompts for a password. The output below from /usr/sbin/sshd -d says that a matching keys was found in the .ssh/authorized_keys file, but it still requires a password from the client. I've read a bunch of web postings about permissions on files and directories, but nothing works. Is it possible to ssh with keys in RHEL 6.1 or is this forbidden? The debug output from ssh and sshd is below. $ ssh -v [email protected] OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012 debug1: Connecting to my.ip.address [my.ip.address] port 22. debug1: Connection established. debug1: identity file /home/dschulze/.ssh/id_rsa type 1 debug1: identity file /home/dschulze/.ssh/id_rsa-cert type -1 debug1: identity file /home/dschulze/.ssh/id_dsa type 2 debug1: identity file /home/dschulze/.ssh/id_dsa-cert type -1 debug1: identity file /home/dschulze/.ssh/id_ecdsa type -1 debug1: identity file /home/dschulze/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 9f:00:e0:1e:a2:cd:05:53:c8:21:d5:69:25:80:39:92 debug1: Host 'my.ip.address' is known and matches the RSA host key. debug1: Found key in /home/dschulze/.ssh/known_hosts:3 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/dschulze/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Offering DSA public key: /home/dschulze/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Trying private key: /home/dschulze/.ssh/id_ecdsa debug1: Next authentication method: password Here is the server output from /usr/sbin/sshd -d [root@ga2-lab .ssh]# /usr/sbin/sshd -d debug1: sshd version OpenSSH_5.3p1 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: rexec_argv[0]='/usr/sbin/sshd' debug1: rexec_argv[1]='-d' debug1: Bind to port 22 on 0.0.0.0. Server listening on 0.0.0.0 port 22. debug1: Bind to port 22 on ::. Server listening on :: port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 5 out 5 newsock 5 pipe -1 sock 8 debug1: inetd sockets after dupping: 3, 3 Connection from 172.60.254.24 port 53401 debug1: Client protocol version 2.0; client software version OpenSSH_6.1 debug1: match: OpenSSH_6.1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: permanently_set_uid: 74/74 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: client->server aes128-ctr hmac-md5 none debug1: kex: server->client aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user root service ssh-connection method none debug1: attempt 0 failures 0 debug1: PAM: initializing for "root" debug1: userauth-request for user root service ssh-connection method publickey debug1: attempt 1 failures 0 debug1: test whether pkalg/pkblob are acceptable debug1: PAM: setting PAM_RHOST to "172.60.254.24" debug1: PAM: setting PAM_TTY to "ssh" debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: trying public key file /root/.ssh/authorized_keys debug1: fd 4 clearing O_NONBLOCK debug1: matching key found: file /root/.ssh/authorized_keys, line 1 Found matching RSA key: db:b3:b9:b1:c9:df:6d:e1:03:5b:57:d3:d9:c4:4e:5c debug1: restore_uid: 0/0 Postponed publickey for root from 172.60.254.24 port 53401 ssh2 debug1: userauth-request for user root service ssh-connection method publickey debug1: attempt 2 failures 0 debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: trying public key file /root/.ssh/authorized_keys debug1: fd 4 clearing O_NONBLOCK debug1: matching key found: file /root/.ssh/authorized_keys, line 1 Found matching RSA key: db:b3:b9:b1:c9:df:6d:e1:03:5b:57:d3:d9:c4:4e:5c debug1: restore_uid: 0/0 debug1: ssh_rsa_verify: signature correct debug1: do_pam_account: called Accepted publickey for root from 172.60.254.24 port 53401 ssh2 debug1: monitor_child_preauth: root has been authenticated by privileged process debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: ssh_gssapi_storecreds: Not a GSSAPI mechanism debug1: restore_uid: 0/0 debug1: SELinux support enabled debug1: PAM: establishing credentials PAM: pam_open_session(): Authentication failure debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 1048576 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_pty_req: session 0 alloc /dev/pts/1 ssh_selinux_setup_pty: security_compute_relabel: Invalid argument debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 17323 debug1: session_exit_message: session 0 channel 0 pid 17323 debug1: session_exit_message: release channel 0 debug1: session_pty_cleanup: session 0 release /dev/pts/1 debug1: session_by_channel: session 0 channel 0 debug1: session_close_by_channel: channel 0 child 0 debug1: session_close: session 0 pid 0 debug1: channel 0: free: server-session, nchannels 1 Received disconnect from 172.60.254.24: 11: disconnected by user debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: deleting credentials

  Read the article

• send command to an already running screen session

  - by aXon

  Hi I have been trying to send commands to a running gnu screen session (4.00.03) in opensolaris, but cannot get it to run any commands through any combination of screen -X Ok, I start a screen session with screen -S test, and then tried to with screen -r -X "date"to just show me the date, when I would reconnect to it. But neither an error message nor output in the screen happened. I tried with so many combinations, that I can't even remember. Any hints on how to accomplish it? The reason why I am doing this is, because I have a program, which does not come as a daemon, and I wish to start it in a screen session, so I can later on see what is going on.

  Read the article

• Determine logged on user on Windows computer from Linux

  - by Justin

  How can I determine who is logged on to a remote Windows XP computer from Linux? I do not have administrator access on the domain or on the remote computer. I can do it from a separate Windows computer using PsLoggedOn -L \\computer from PsTools I've tried using nmblookup -A remotecomputer, but I only see entries for the computer and the domain, not a <03> entry for the user. I've also tried running PsLoggedOn under wine; I get an error: Connecting to Registry of \\computer.company.com... fixme:reg:RegConnectRegistryW Connect to L"computer.company.com" is not supported. I started looking into winexe, but it looks like I would need administrative rights on the remote computer to get it working.

  Read the article

• How can I access the external microphone with Ubuntu?

  - by Charles Merriam

  Sound in Ubuntu, it has its own special joy. I would like my external microphone to work. Symptoms: I can play sound through the speakers I can play sound through the headsets. Plugging and and plugging headphone output correctly switches. I can record from the built-in microphone, using "Sound Recorder" and others. but: I cannot record from the external microphone. My Sound Preferences/Input panel has no option for an external microphone. If the answer is upgrade the ALSA drivers, please say exactly what to type. Thank you. ======== I'm using Ubuntu 9.10 Karmic Koala on a laptop (Gateway W3501), Sigmatel. That is: ~$ head -1 /proc/asound/card0/code* ==> /proc/asound/card0/codec#0 <== Codec: SigmaTel STAC9205 ==> /proc/asound/card0/codec#1 <== Codec: Conexant ID 2c06 ~$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)

  Read the article

• Ubuntu Wireless card not found

  - by user32121

  Hello all, I'm trying to setup Ubuntu on an old PC. I ran the following command, lspci, in order to get info on the wireless card installed. 00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless (rev 03) Does anyone know where I can get drivers for this card/chip? And also, how to install (I'm rather new to linux). Also, I'm sure the card is working because I just formatted over xp, and everything was working well. Thanks in advanced!

  Read the article

• I am not seeing named session in gnu screen

  - by dorelal

  I am tying to learn gnu screen. I am using mac(snow leopard). I am running 4.00.03 version of screen. I am starting a new screen with following command screen -S foo However after that if I do ctrl + A + " then I see the list of screens. However all the lists have numbers and then bash. Because all it says is 'bash' I can't figure out which screen has what. Am I missing something?

  Read the article

• Mass remove passwords from rar archives

  - by ldigas

  Is there a way to (I'm using WinRAR; demo, but I'm willing to change it to whatever is needed) mass remove passwords from a bunch of files ? Problem description: for reasons unknown to me, some archiving was done for two-and-something years in RAR format, and all archives have passwords. I have a list of them, them all being similar (mostly something like John-03, John-04, John-05 ... e.g. name-month ...) but I need to manipulate the files at large, and it is a real problem removing and or dearchiving all those files, while entering passwords manually. What would be my best options concerning ? Ideally, I'm looking for some kind of archiver which tries out a predefined list of passwords, and asks only if non of them cracks the safe. Afaik, WinRAR has no such feature.

  Read the article

• Debian on Hyper-V

  - by Tobia

  I installed Debian with kernel 2.6.32-5-686 on a Hyper-V virtual machine. I had to add a legacy network card. I follow this tutorial http://www.microsofttranslator.com/bv.aspx?ref=Internal&from=ru&to=en&a=http://blogs.technet.com/b/abeshkov/archive/2011/03/17/hyperv_5f00_debian.aspx to add Hyper-V driver but when I reboot with the new kernel it crash during bootup. Is there any other way to load hyper-v drivers? I really need to change that legacy network card because my debian machine is going to be used as proxy. Thank you.

  Read the article

• b43 module loaded, but no interface showed up

  - by Eduardo Bezerra

  I'm using CentOS 6.3 x86_64 on a hardware with a BCM43224 chip for wi-fi. I installed the b43-fwcutter module and then run modprobe b43, with no error messages. However, no new network interface showed up, and the return of iwconfig is: lo no wireless extensions. eth0 no wireless extensions. lspci -nn | grep 43224 returns: 03:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) and uname -a: Linux localhost.localdomain 2.6.32-279.14.1.el6.x86_64 #1 SMP Tue Nov 6 23:43:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Any ideas of how to make the wireless device work?

  Read the article

• Wireless card not found on Ubuntu

  - by idealflip

  Hello all, I'm trying to setup Ubuntu on an old PC. I ran the following command, lspci, in order to get info on the wireless card installed. 00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless (rev 03) Does anyone know where I can get drivers for this card/chip? And also, how to install (I'm rather new to linux). Also, I'm sure the card is working because I just formatted over xp, and everything was working well. Thanks in advanced!

  Read the article

• Can I run AD commands from a standard PowerShell script?

  - by Ben

  I am putting together a script to run post-sysprep. It should check if the machine is on the network, and if it is then it should query AD to see if a computer account exists with it's service tag (we're using these as the hostnames of the machines.) If it does exist, it should delete the account and rejoin the machine to the domain. I have got the majority of the script running, but need to run the following: Remove-ADComputer -Identity $distinguishedName How can I run this from the "standard" powershell environment? I don't want to use the AD module. (By the way - I'm on a mixed mode 2000/03 domain as we are in the process of upgrading to 2008) I'm new to PowerShell so be gentle if I'm completely missing the point! Thanks, Ben

  Read the article

• Why does 1GBit card have output limited to 80 MiB ?

  - by Gallus

  I'm trying to utilize maximal bandwidth provided by my 1GiB network card, but it's always limited to 80MiB (real megabytes). What can be the reason? Card description (lshw output): description: Ethernet interface product: DGE-530T Gigabit Ethernet Adapter (rev 11) vendor: D-Link System Inc physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 11 serial: 00:22:b0:68:70:41 size: 1GB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation The card is placed in following PCI slot: *-pci:2 description: PCI bridge product: 82801 PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: 92 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list The PCI isn't any PCI Express right? It's a legacy PCI slot? So maybe this is the reason? OS is a linux.

  Read the article

• Is it possible to control my CPU frequency?

  - by Tim

  My laptop's CPU Type is: Mobile AMD Turion 64 ML-30, 1600 MHz (8 x 200) I was wondering how to find out if its CPU frequency is controllable? What softwares or other ways can control my CPU frequency? My OSes are Windows XP and Ubuntu. Can I control CPU frequency so that the CPU temperature can be controlled not to exceed some temperature? Thanks and regards! More information: My laptop is Acer Aspire 5000. Its motherboard is reported by Speccy as: Manufacturer: Acer, Inc. Model: Lugano M Version: Not Applicable Chipset Vendor: SiS Chipset Model: 760GX Chipset Revision: 03 Southbridge Vendor: SiS Southbridge Model: LPC Bridge Southbridge Revision: 25 BIOS Brand: Acer Version: 3A19 Date: 05/17/05

  Read the article

• Easy File Locker Locked My Desktop

  - by user20358

  I'm happy with easy file locker, it does as promised. Last night I decided to lock all my files. C:users/Barry Some how my desktop is locked. When I closed EFL my desktop went black. Safe mode is still black. Help Below are my spec's eMachines ET1161-03 CPU: Athlon 64 X2 4400+; CPU speed: 2300GHz; Graphics adapter: nVidia GeForce 6150SE; Monitor: No; Hard drive size: 320GB; WorldBench rating: Fair

  Read the article

• Where is debian storing its network settings?

  - by user13743

  I have a debian machine that is supposed to have a static ip, but insists on getting its address from the DHCP server. Here's this settings file: $> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.1.99 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 Yet $> sudo /etc/init.d/networking restart Reconfiguring network interfaces...done. $> sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:e0:03:09:05:2e inet addr:192.168.1.205 Bcast:255.255.255.255 Mask:255.255.255.0 ... Where is it being told to use dhcp?

  Read the article

• Security tips for adding wireless AP to domain network?

  - by Cy

  I am researching best-practices for adding wireless to our existing domain network. My DHCP server is running Windows Server 03 Standard (not sure if thats useful). I am familiar with simple home networking but I thought I'd get some expert advice for the more advanced stuff. Any tips and / or best-practices? Is this Cisco Wireless Access Point a good option? Are there any additional hardware recommendations? Thank you in advance for your help.

  Read the article

• How to tell if OpenGL is really working in Ubuntu 10.04

  - by Jonathan

  I have a lenovo S9e running Intel integrated graphics. Here is my lspci output related to the graphics: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3870 Flags: bus master, fast devsel, latency 0 Memory at f0580000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 I want to know how I can make sure OpenGL support is running in full on an Ubuntu 10.04 installation. I have a few hints to think that it is not: The "Desktop Effects" will not load Apps such as stardock, when attempting to use OpenGL rendering, will display black boxes instead of transparency In the games Pioneers, the number-tile icons are suspiciously just black circles Windows games running with Wine will only support software rendering, not hardware rendering When I boot into a Knoppix LiveCD, the desktop effects do work, splendidly, meaning compiz detects my computer as capable. My problem with troubleshooting is that Canonical has basically eliminated the conf-file-based mechanism of X11 as far as I can tell, thus making it even harder to ensure graphics modules are loading properly. How do I debug and test OpenGL on m Ubuntu 10.04 installation?

  Read the article

• Outlook Prompting for password from Exchange server in domain environment

  - by jherlitz

  We are running exchange 2007 in a domain environment. We have mostly outlook 2003 clients, but in process of upgrading to outlook 07 over the next couple of weeks. Some users (both 03 & 07) are constantly getting prompted to enter their credentials. The 07 client I was working on this morning states "needs password" in the bottom right corner. It is also speratic, as it will work fine most days but not some other days. The user I was working with this morning, has been working fine. Now it just started up today. I have been googling this, and have found lot's of information, but nothing that has helped yet. A lot of the information out there is for outlook users using a external email account. Being they already logged into the domain, these users should not be prompted for their credentials. Any advice out there?

  Read the article

• DDNS Not Creating Journal (Dhcpd and Named)

  - by user130094

  * EDIT 1 * After monkeying with additional debug logging I see some log entries of interest. 27-Jul-2012 23:45:26.537 general: error: zone example.lan/IN/internal: journal rollforward failed: no more 27-Jul-2012 23:45:26.537 general: error: zone example.lan/IN/internal: not loaded due to errors. ^^^ If I can remedy the above messages I think I'll be good to go ^^^ * EDIT 2 * Grasping at straws I touched a forward and a reverse zone journal file and restarted named. Boom! Works. Despite documentation stating the files are created automatically and what I have seen before... dunno why but that did the trick. Also re-checked perms on the dir the files live in. As certain as I was, they were correct with named having rw. CentOS 6 (final) dhcpd 4.1.1-P1 named BIND 9.8.2rc1-RedHat-9.8.2-0.10.rc1.el6 Basic DHCP and DNS functionality are in place on 192.168.111.2. Clients are assigned addresses as intended and can resolve local DNS names as well as Internet names. My problem is that named's zone journal files are not created. chroot: /var/named/chroot I tried placing the zone files in various directories (/var/named/data, /var/named, /var/named/dynamic - no matter which dir with named owning and wide open perms I now get nowhere). Along the way I, at one point, got a permission denied when named tried to create the journal. Resolved the issue by: chown --recursive named:named /var/named chmod --recursive 777 /var/named The journal was then created and here's where things fell apart. I attempted to tame permissions to something more sane and broke it. Once changed and having restarted named it threw an error indicating the journal was out of sync (or something to that affect)... didn't matter since this is a new setup so I deleted it and now it is not recreated. Now though I see no errors in /var/log/messages, my chrooted /var/log/named.log, or chrooted /var/log/named.debug. I increased the debug level with 'rndc trace' - no love. Increased trace to 10, still nothing. SELinux is disabled... [root@server temp]# sestatus SELinux status: disabled dhcpd.conf... allow client-updates; ddns-update-style interim; subnet 192.168.111.0 netmask 255.255.255.224 { ... key dhcpudpate { algorithm hmac-md5; secret LDJMdPdEZED+/nN/AGO9ZA==; } zone example.lan. { primary 192.168.111.2; key dhcpudpate; } } named.conf... key dhcpudpate { algorithm hmac-md5; secret "LDJMdPdEZED+/nN/AGO9ZA=="; }; zone "example.lan" { type master; file "/var/named/dynamic/example.lan.db"; allow-transfer { none; }; allow-update { key dhcpudpate; }; notify false; check-names ignore; }; The following shows /var/log/named.log output of named starting up - no errors. 27-Jul-2012 21:33:39.349 general: info: zone 111.168.192.in-addr.arpa/IN/internal: loaded serial 2012072601 27-Jul-2012 21:33:39.349 general: info: zone example.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.350 general: info: zone example2.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.350 general: info: zone example3.lan/IN/internal: loaded serial 2012072601 27-Jul-2012 21:33:39.350 general: info: zone example4.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.351 general: info: zone example5.lan/IN/internal: loaded serial 2012072501 27-Jul-2012 21:33:39.351 general: info: managed-keys-zone ./IN/internal: loaded serial 0 27-Jul-2012 21:33:39.351 general: info: zone example.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example1.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example2.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.352 general: info: zone example3.lan/IN/external: loaded serial 2012072501 27-Jul-2012 21:33:39.353 general: info: managed-keys-zone ./IN/external: loaded serial 0 27-Jul-2012 21:33:39.353 general: notice: running 27-Jul-2012 21:34:03.825 general: info: received control channel command 'trace 10' 27-Jul-2012 21:34:03.825 general: info: debug level is now 10 ...and /var/log/messages for a named start... Jul 27 23:02:04 server named[9124]: ---------------------------------------------------- Jul 27 23:02:04 server named[9124]: BIND 9 is maintained by Internet Systems Consortium, Jul 27 23:02:04 server named[9124]: Inc. (ISC), a non-profit 501(c)(3) public-benefit Jul 27 23:02:04 server named[9124]: corporation. Support and training for BIND 9 are Jul 27 23:02:04 server named[9124]: available at https://www.isc.org/support Jul 27 23:02:04 server named[9124]: ---------------------------------------------------- Jul 27 23:02:04 server named[9124]: adjusted limit on open files from 4096 to 1048576 Jul 27 23:02:04 server named[9124]: found 2 CPUs, using 2 worker threads Jul 27 23:02:04 server named[9124]: using up to 4096 sockets Jul 27 23:02:04 server named[9124]: loading configuration from '/etc/named.conf' Jul 27 23:02:04 server named[9124]: using default UDP/IPv4 port range: [1024, 65535] Jul 27 23:02:04 server named[9124]: using default UDP/IPv6 port range: [1024, 65535] Jul 27 23:02:04 server named[9124]: listening on IPv4 interface eth0, 192.168.111.2#53 Jul 27 23:02:04 server named[9124]: generating session key for dynamic DNS Jul 27 23:02:04 server named[9124]: sizing zone task pool based on 12 zones Jul 27 23:02:04 server named[9124]: set up managed keys zone for view internal, file 'dynamic/3bed2cb3a3acf7b6a8ef408420cc682d5520e26976d354254f528c965612054f.mkeys' Jul 27 23:02:04 server named[9124]: set up managed keys zone for view external, file 'dynamic/3c4623849a49a53911c4a3e48d8cead8a1858960bccdea7a1b978d73ec2f06d7.mkeys' Jul 27 23:02:04 server named[9124]: command channel listening on 127.0.0.1#953 What can I do to troubleshoot this further? It almost seems as though dhcpd is not triggering the update. Maybe I should troubleshoot here and, if so, how? Many thanks.

  Read the article

• ioncube not load after upgrading to php 5.4

  - by amir

  i am afraid that i broke somthing in my vps :/ i hope you can help me. i am on ubuntu-12.04-x86. and i moved to new vps so i tryied to upgrade the php to the news version from 5.3 to 5.4. anyway after installing i get this messages: fild loading /usr/lib/php5/20090626+lfs/ioncube_loader_lin_5.3.so /usr/php5/20090625+lfs/ioncube_loader_lin_5.3.so: undefined synbol: php_body_wri php 5.4.8-1~presise+1 (cli) (built(oct 29 2012) i need to mention that the server is working and php also working but when i do phpinfo there is no "with the ionCube PHP Loader v4.0.14, Copyright (c) 2002-2011, by ionCube Ltd." which was before :/ i installed with this guide:http://www.upubuntu.com/2012/03/how-to-upgrade-install-php-540-under.html i need to worry?

  Read the article

• "Bad response to Storage command" when scheduling job with Bacula

  - by Joril

  I have a Bacula setup with 9 clients, and it's working happily. Today I had to add another client, so I went and copied+adapted the existing configuration files from another client, but when I schedule a job for the new client, I get these errors: 20-Mar 17:50 tools-dir JobId 39: Start Backup JobId 39, Job=BackupPresenze2.2012-03-20_17.50.49_04 20-Mar 17:50 tools-dir JobId 39: Using Device "FileStorage" 20-Mar 17:50 presenze2-fd JobId 39: Fatal error: Failed to connect to Storage daemon: bacula.mylan.local:9103 20-Mar 17:50 tools-dir JobId 39: Fatal error: Bad response to Storage command: wanted 2000 OK storage , got 2902 Bad storage From the client I can telnet to bacula.mylan.local:9103 just fine, and jobs for other clients work successfully... What could I check? (Server and client run Ubuntu 10.04, if it's relevant)

  Read the article

• How to tell if linux disk IO is causing excessive (> 1 second) application stalls

  - by noahz

  I have a Java application performing a large volume (hundreds of MB) of continuous output (streaming plain text) to about a dozen files a ext3 SAN filesystem. Occasionally, this application pauses for several seconds at a time. I suspect that something related to ext3 vsfs (Veritas Filesystem) functionality (and/or how it interacts with the OS) is the culprit. What steps can I take to confirm or refute this theory? I am aware of iostat and /proc/diskstats as starting points. Revised title to de-emphasize journaling and emphasize "stalls" I have done some googling and found at least one article that seems to describe behavior like I am observing: Solving the ext3 latency problem Additional Information Red Hat Enterprise Linux Server release 5.3 (Tikanga) Kernel: 2.6.18-194.32.1.el5 Primary application disk is fiber-channel SAN: lspci | grep -i fibre 14:00.0 Fibre Channel: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter (rev 03) Mount info: type vxfs (rw,tmplog,largefiles,mincache=tmpcache,ioerror=mwdisable) 0 0 cat /sys/block/VxVM123456/queue/scheduler noop anticipatory [deadline] cfq

  Read the article

• What is normal SCSI error handling process (scsi_eh_3) CPU time usage?

  - by Kris Jordan

  Last week I got setup with a new dedicated server that is running 4x SCSI drives in RAID 10 on CentOS. The machine is pretty lightly loaded at the moment and has been running for 8 days. The process 'scsi_eh_3' has a CPU time of 13:09.67 in top. This is 3x the next closest CPU time of 4:03.93 for mysqld. Is it normal for the scsi error handling process to use this much CPU time? (Seems like it goes to 0.3% usage ever 5 seconds.) Could this be an indicator that one or more of the drives is having issues?

  Read the article

• MailServer Setting

  - by Ashian

  Hi I have a mail server on windows 2003 ( MailEnable) I setup mail server to authonticate users before sending mail. (This mail server requires authentication when attempting to send to a non-local e-mail address) but from yesterday , without change any setting I got many Message Delivery Delay from mail server for email address that I never try to sending email: I afraid that I someone try to sending Spam from my mail server,How can I check this possiblity ? and fix the problem. Thanks MailEnable: Message delivery has been delayed. Message is waiting at *.info for delivery to mailin-03.mx.aol.com. The message will be retried for another 29 hours. Reason: Mail Server for aol.com could not accept your email at this time. MailEnable will keep trying to deliver this message and will notify you of any progress. The remote mail server returned the error: 421-: (DNS:NR)

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >