Search Results

Search found 2050 results on 82 pages for 'c 03'.

Page 43/82 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• Windows CE and the Compact Framework are dead?

  - by Valter Minute

  This is one of the question that I’ve been asked more and more frequently at my public speeches and each time I meet customers. The announcement of the new Windows Phone 7 platform and the release of Visual Studio 2010 generated a bit of confusion around Windows CE and some of the technologies it supports. Windows CE is still alive and a lot of good programmers are working on the new releases (I had a chance to know some of them during the MVP summit in February). Here’s a blog post from Olivier Bloch that describes the situation and provides some good news about the OS: http://blogs.msdn.com/obloch/archive/2010/05/03/windows-ce-is-not-dead.aspx As you can read here, Windows Phone 7 keeps its “roots” inside Windows CE. Regarding the .NET Compact Framework, this article from the excellent “I know the answer (it’s 42)” blog from Abhinaba (it seems that we share a passion for photography, Douglas Adams and embedded development), explains that the .NET CF is the foundation of XNA and Silverlight implementation on the WP7 platform: http://blogs.msdn.com/abhinaba/archive/2010/03/18/what-is-netcf.aspx So Windows CE is here to stay, powering one of the most interesting smart phone platforms and ready to power also your devices. Add those blogs to your RSS reader list and stay tuned for more good news about CE and the Compact Framework!

  Read the article

• How to setup a Wireless Access-Point using my laptop's WiFi card?

  - by Abdul Karim Memon

  want to share my Laptops (running Ubuntu 10.10) Broadband with my Android (Galaxy Mini) running 2.2.1. Since Androids currently do not support ad-hoc networks so the "Create new wireless network.." won't help. Q1) How do i setup a Wireless Access Point using my Laptops WiFi card? Q2) What is the difference between an "ad-hoc" network and an "access point"? **abdulkarim@aK-laptop**:~$ lspci | grep ireless 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01) iw list Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) (passive scanning) * 2472 MHz [13] (20.0 dBm) (passive scanning) * 2484 MHz [14] (disabled) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 Supported interface modes: * IBSS * managed * ** AP * AP/VLAN** * monitor * mesh point Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * Unknown command (55) * Unknown command (57) * Unknown command (59) * set_wiphy_netns * Unknown command (65) * connect * disconnect

  Read the article

• Lenovo S110 netbook screen resolution Ubuntu

  - by Neigyl R. Noval

  I am still stuck with 800x600 resolution. Here is the output of lspci: 00:00.0 Host bridge: Intel Corporation Device 0bf2 (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Device 0be2 (rev 09) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8176 (rev 01) Also, I tried modifying /usr/lib/X11/xorg.conf.d/10-monitor.conf to fix this problem, but still does not work: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Screen" Identifier "Screen0" Monitor "Monitor0" Device "Card0" SubSection "Display" Viewport 0 0 Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" EndSubSection EndSection Section "Device" Identifier "Card0" Driver "vesa" VendorName "Intel Corporation Device" EndSection I'm using Gnome. System Preference Monitor screen resolution sticks to 800x600. What am I going to do?

  Read the article

• two possible wifi devices competing, one is hard blocked - unable to connect wireless

  - by patrickmw

  blacklisted acer_wmi because that was showing up in the rfkill list then ideapad_wlan was listed $ rfkill list wifi 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes $ lshw -C network *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: f0:de:f1:12:21:e9 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.139 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:42 memory:f0400000-f043ffff ioport:2000(size=128) *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: ac:81:12:38:ba:89 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff contents of /var/lib/NetworkManager/NetworkManager.state [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true I'm not sure how to disable the wifi devices independently. I'm also not sure which device is the correct one. I think its the brcmw device. Any suggestions?

  Read the article

• check what process was causing the problem of high cpu load

  - by linuxk

  I'm running nginx wordpress server in KVM using 12.04 server x86. It was running very well about 4 month until 2 hours ago. I found that my website is down and no ping response. Virt-manager logged high cpu load(plz see the picture below) before unexpected shut down. I want to know what process caused unexpected shutdown. The following log files make me think my server is attacked. Any suggestions and help would be appreciated. kern.log and syslog showed me same output. Nov 11 03:54:11 www kernel: [1344541.156239] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=0.0.0.0 DST=224.0. 0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Nov 11 03:54:11 www kernel: [1344541.156315] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=0101:080a:2334:c90 0:0100:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=ICMPv6 TYPE=130 CODE=0 /nginx/access.log showed me 119.235.237.17 - - [11/Nov/2012:03:45:29 +0900] "GET /blog HTTP/1.1" 200 30493 "-" "Yeti/1.0 (NHN Corp.; http://help.naver.com/robots/)" my-server-ip - - [11/Nov/2012:11:05:30 +0900] "POST /wp-cron.php?doing_wp_cron=13 HTTP/1.0" 499 0 "-" "WordPress/3.4.2; http://mywebsite.com" Server turned on in here. 119.235.237.16 - - [11/Nov/2012:11:05:30 +0900] "GET /blog HTTP/1.1" 200 32935 "-" "Yeti/1.0 (NHN Corp.; http://help.naver.com/robots/)"

  Read the article

• two possible wifi devices competing, one is hard blocked

  - by patrickmw

  blacklisted acer_wmi because that was showing up in the rfkill list then ideapad_wlan was listed $ rfkill list wifi 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes $ lshw -C network *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: f0:de:f1:12:21:e9 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.139 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:42 memory:f0400000-f043ffff ioport:2000(size=128) *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: ac:81:12:38:ba:89 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff I'm not sure how to disable the wifi devices independently. I'm also not sure which device is the correct one. I think its the brcmw device. Any suggestions?

  Read the article

• Cron: job starts but doesn't complete

  - by Guandalino

  I have a problem with a cron job which starts but doesn't complete. Running the command manually works fine. I already read the page about cron issues and solutions here on AskUbuntu, tried the proposed solutions but didn't find an answer working in my case. I'm using Ubuntu 12.04. $ crontab -e SHELL=/bin/bash # otherwise it would be /bin/sh 59 16 * * * /bin/duply calendar backup > /tmp/duply.log Btw, the cron file ends with an empty line, as someone pointed out. Once the job has "finished"...: $ cat /tmp/duply.log Start duply v1.5.7, time is 2012-06-22 16:59:01. Instead, running manually the script it works correctly and gives this output: Start duply v1.5.7, time is 2012-06-22 17:06:39. [cut] ... here is a long output generated by duply. ... and yes, files have been backed up. [cut] --- Finished state OK at 17:06:42.581 - Runtime 00:00:03.170 --- I also tried to restart the cron daemon (sudo service cron restart) but nothing changed. Do you have any suggestion to fix the issue?

  Read the article

• Why does 'top' say my machine is only 50% idle?

  - by Chris Moore

  What's going on here? I'm running nothing on the system, iotop and iftop show the network and hard drive are both idle, and top (sorted by %CPU) shows nothing running. So why is the system only 50% idle? What's the other 50% waiting for? How can I find out? top - 12:01:05 up 3 days, 15:03, 1 user, load average: 6.00, 6.01, 6.05 Tasks: 179 total, 1 running, 178 sleeping, 0 stopped, 0 zombie Cpu(s): 0.7%us, 0.0%sy, 0.0%ni, 49.7%id, 49.7%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2053996k total, 1992600k used, 61396k free, 81680k buffers Swap: 4092924k total, 10740k used, 4082184k free, 1338636k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1042 deb 20 0 21468 1412 1000 R 1 0.1 0:00.03 top 1 root 20 0 24188 1952 1152 S 0 0.1 0:01.44 init 2 root 20 0 0 0 0 S 0 0.0 0:00.05 kthreadd Update: dmesg shows the printer driver misbehaving: [28858.561847] cnijnetprn[1503]: segfault at 29 ip 00007f56cf3480f7 sp 00007fffb964ec30 error 4 in libcnnet.so.1.2.0[7f56cf345000+9000] [68851.187802] cnijnetprn[9180]: segfault at 29 ip 00007ffe7636a0f7 sp 00007fff9a8b1990 error 4 in libcnnet.so.1.2.0[7ffe76367000+9000] [155412.107826] cnijnetprn[19966]: segfault at 29 ip 00007fc31de770f7 sp 00007fffc03aa8e0 error 4 in libcnnet.so.1.2.0[7fc31de74000+9000] and also some issue with cp: [248041.172067] INFO: task cp:27488 blocked for more than 120 seconds. [248041.172071] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [248041.172075] cp D ffffffff81805120 0 27488 27345 0x00000004 [248041.172080] ffff880078d57a38 0000000000000046 ffff880078d579d8 ffffffff81032a79 [248041.172085] ffff880078d57fd8 ffff880078d57fd8 ffff880078d57fd8 0000000000012a40 [248041.172090] ffff88007b818000 ffff880069acc560 ffff880078d57a18 ffff88007f8532c0 [248041.172095] Call Trace: [248041.172104] [<ffffffff81032a79>] ? default_spin_lock_flags+0x9/0x10 [248041.172109] [<ffffffff8110a360>] ? __lock_page+0x70/0x70 [248041.172114] [<ffffffff815f0ecf>] schedule+0x3f/0x60 I did try copying something to the USB stick that's plugged into the router and mounted onto this computer using mount.cifs. That almost always causes everything to lock up, so I'm guessing that's the problem. I'll reboot and stop using mount.cifs.

  Read the article

• Why don't %MEM values add up to mem in top?

  - by ben

  I'm currently debugging performance issues with my VPS and for that I'm trying to understand which of the processes eat the most memory. Reading top, here's what I get: Mem: 366544k total, 321396k used, 45148k free, 380k buffers Swap: 1048572k total, 592388k used, 456184k free, 7756k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 12339 ruby 20 0 844m 74m 2440 S 0 20.8 0:24.84 ruby 12363 ruby 20 0 844m 73m 1576 S 0 20.6 0:00.26 ruby 21117 ruby 20 0 171m 33m 1792 S 0 9.3 2:03.98 ruby 11846 ruby 20 0 858m 21m 1820 S 0 6.0 0:09.15 ruby 21277 ruby 20 0 219m 11m 1648 S 0 3.2 2:00.98 ruby 792 root 20 0 266m 10m 1024 S 0 3.0 1:40.06 ruby 532 mysql 20 0 234m 4760 1040 S 0 1.3 0:41.58 mysqld 793 root 20 0 250m 4616 984 S 0 1.3 1:20.55 ruby 586 root 20 0 156m 4532 848 S 0 1.2 6:17.10 god 12315 ruby 20 0 175m 2412 1900 S 0 0.7 0:07.55 ruby 3844 root 20 0 44036 2132 1028 S 0 0.6 1:08.22 ruby 10939 ruby 20 0 179m 1884 1724 S 0 0.5 0:08.33 ruby 4660 ruby 20 0 229m 1592 1440 S 0 0.4 2:55.46 ruby 3879 nobody 20 0 37428 964 520 S 0 0.3 0:01.99 nginx As you can see my memory is about 90% used (which is my issue) but when you add up the %MEM values, it goes to about 50-60% only. Same thing, RES doesn't add up to ~350mb. Why? Am I misunderstanding their meaning? Thanks

  Read the article

• Archbeat Link-O-Rama Top 10 Tweets for October 2013

  - by OTN ArchBeat

  What caught the attention of the 1,988 people who follow @OTNArchBeat last month? The answer is below, in the list of Top 10 Tweets for October 2013 RT @java: Which women in tech inspire you? Blog about them on Ada Lovelace Day! #ALD13 Oct 10, 2013 at 11:14 AM RT @ORCL_Linux: New blog post: Announcing Unbreakable Enterprise Kernel Release 3 for #Oracle #Linux Oct 21, 2013 at 07:11 PM RT @glassfish: Quick & Dirty How-to Guide: Install #GlassFish 4 on #RaspberryPi. Creating an #IoT infra via @MkHeck Oct 27, 2013 at 07:19 PM RT @java: Nighthacking with James Gosling, interview from Hawaii, watch live Oct. 23, 11am PT #java Oct 21, 2013 at 11:26 AM RT @ensode: "Oracle has posted blogs on how to migrate from #Spring to #JavaEE" I wrote the linked article Oct 07, 2013 at 10:53 AM SOA and User Interfaces - by @soacommunity @hajonormann @gschmutz @t_winterberg et al #industrialsoa Oct 03, 2013 at 01:17 PM RT @oracleace: Welcome and congrats to new #ACEDs @kevin_mcginley and Rene van Wijk @MiddlewareMagic Oct 25, 2013 at 12:59 PM SOA in Real Life: Mobile Solutions by @soacommunity @HajoNormann @gschmutz @t_winterberg et al #industrialsoa Oct 28, 2013 at 09:23 AM RT @OracleAnalytics: Curious to how big #oow13 was? Here’s an infographic to show you some of the stats. Oct 25, 2013 at 01:13 PM Free Poster: ACM in Practice >> thanks to @dschmeid @hajonormann @torsten_winterberg @tbmaier @gschmutz et al. Oct 16, 2013 at 09:56 AM Thought for the Day "You can converge a toaster and a refrigerator, but those things are probably not going to be pleasing to the user." — Tim Cook, CEO of Apple Inc. (Born November 1, 1960) Source: brainyquote.com

  Read the article

• Internal Mic not working on Dell Adamo 13

  - by AFD

  So I'm using Elementary Luna Beta (based on Ubuntu 12.04 LTS) on a spare HDD after successfully using Jupiter release (based on 10.10) for many years. In Jupiter I had my internal mic work out of the box and with Skype installed from deb it was all setup without having to step foot inside the terminal. In Luna Beta the internal mic is not recognised by the OS and so also not recognised by Skype. I believe the hardware is this (from sudo lshw): *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:46 memory:f8600000-f8603fff As well as this I ran cat /proc/asound/card0/codec* | grep Codec which gave me: Codec: IDT 92HD73C1X5 Codec: Intel Cantiga HDMI How do I tweak Luna to get this hardware working properly? I'm able to switch out my Luna HDD with the Jupiter HDD to help troubleshoot what the differences are between the two and why the more recent OS can't find / use the mic correctly. Thanks in advance for any help you can give.

  Read the article

• Monitor not detected after booting without monitor attached (12.04)

  - by cawkie

  I had a stable 12.04 machine running perfectly. The machine was booted without the monitor connected - since then the system always boots to low graphics mode. Onboard graphics (from lspci): VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) Monitor: AOC e2450Swh Display widget shows monitor as laptop(!?) and system details shows graphics as Gallium 0.4 on llvmpipe (LLVM 0x300) X-server log appears to show correct monitor detected. When I boot from a live CD I get full 3d graphics I've tried the monitor on a different machine - all OK. I've tried a different monitor on this machine - same problem. Between having a working system and a broken one there have been no updates and I have made no configuration changes... EDIT: I have come to the conclusion that the problem is caused by a known issue with lightDM hanging on battery check. I've managed to get 3D graphic working by switching to using GDM - not a solution but acceptable workaround. I would still like to know what is causing the problem and how I managed to get my system into this state!

  Read the article

• How to connect two ubuntu computers with ethernet cable

  - by Lukasz Zaroda

  I'm trying to connect with ethernet cable two computers - desktop and laptop. What I want to do is transfer a lot of data from one to another. The problem is that I'm doing everything from: How to network two Ubuntu computers using ethernet (without a router)? But after that, ping always gives me "Destination host unreachable". I was searching a while but couldn't figure out what is a reason it doesn't work, maybe it's something about my devices or maybe someone will have another idea. Ethernet cable I got with my router. There is a text printed on it: Aurit Data Cable Cat.5 UTP 26AWG 4PAIR AWM PUC 75°C EIA/TIA 568B It's connecting now my desktop to router, so I can send this question. My desktop: System: Ubuntu 12.04 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) "ethtool -i eth0" output: driver: r8169 version: 2.3LK-NAPI firmware-version: rtl_nic/rtl8168d-1.fw bus-info: 0000:01:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: yes My laptop: System: Ubuntu 14.04 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 08) "ethtool -i eth0" output: driver: alx version: firmware-version: bus-info: 0000:01:00.0 supports-statistics: no supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no My iptables are accepting everything. Any ideas why I cannot reach other computer?

  Read the article

• Can't connect to hidden network with BCM4313

  - by poomerang

  The wireless works fine with all the other wi-fi nets I have tried, the only problem is with this hidden network. I should add it's the only hidden network I've tried, so I am not sure if the problem is it being hidden or somethings else, but I've checked the settings of NetworkManager against another Ubuntu system (which can connect) and they appear to be the same, passphrase included. The network is using WPA2 Personal with AES encryption, I don't know how to check this setting but I believe it's the usual for WPA2, and therefore usually not a problem. Also, I can connect through ethernet, which should exclude any blacklisting of my device, I believe. I usually use brcmsmac drivers, I've tried also STA but the result is the same. I've also tried the suggestion from Unable to connect to hidden SSID with no luck output of lspci -v is 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Askey Computer Corp. Device 7175 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d4000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac

  Read the article

• One of the partion on a usb harddisk cannot automount

  - by holmescn

  It is a very strange problem. My usb harddisk has four partitions, one is primary, the other three are logical (contained within an extended partition). When I plug in the disk, three of the partitions are mounted automatically except one--the first logical partition in the extended partition. Initially I thought it is the problem of system (at that time I used Mint). But after I change to Ubuntu 12.04, the problem wasn't solved. I don't want to add a rule in fstab, and I want to know what happened. The disk is fine, and the partition can be accessed in Windows and mounted manually. result of dmesg | tail: [100933.557649] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd [100933.651891] scsi8 : usb-storage 2-1.2:1.0 [100934.649047] scsi 8:0:0:0: Direct-Access SAMSUNG PQ: 0 ANSI: 0 [100934.650963] sd 8:0:0:0: Attached scsi generic sg2 type 0 [100934.651342] sd 8:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [100934.651977] sd 8:0:0:0: [sdb] Write Protect is off [100934.651989] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00 [100934.652836] sd 8:0:0:0: [sdb] No Caching mode page present [100934.652848] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.655354] sd 8:0:0:0: [sdb] No Caching mode page present [100934.655367] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.734652] sdb: sdb1 sdb3 < sdb5 sdb6 sdb7 > [100934.737706] sd 8:0:0:0: [sdb] No Caching mode page present [100934.737725] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.737731] sd 8:0:0:0: [sdb] Attached SCSI disk result of parted -l: Model: SAMSUNG (scsi) Disk /dev/sdb: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 21.5GB 21.5GB primary ntfs 3 21.5GB 320GB 299GB extended lba 5 21.5GB 129GB 107GB logical ntfs 6 129GB 236GB 107GB logical ntfs 7 236GB 320GB 83.8GB logical ntfs

  Read the article

• lm-sensor and cpu temperatures

  - by nalsanj

  i am on ubuntu Precise Pangolin. The processor is Intel i3. a desktop. i installed lm-sensors and below is the report "sensors" gave coretemp-isa-0000 Adapter: ISA adapter Core 0: +30.0°C (high = +89.0°C, crit = +105.0°C) Core 2: +33.0°C (high = +89.0°C, crit = +105.0°C) w83627dhg-isa-0a10 Adapter: ISA adapter Vcore: +0.93 V (min = +0.00 V, max = +1.74 V) in1: +0.75 V (min = +1.99 V, max = +1.99 V) ALARM AVCC: +3.36 V (min = +2.98 V, max = +3.63 V) +3.3V: +3.36 V (min = +2.98 V, max = +3.63 V) in4: +1.30 V (min = +0.90 V, max = +1.77 V) in5: +0.76 V (min = +1.15 V, max = +0.90 V) ALARM in6: +1.06 V (min = +0.94 V, max = +2.03 V) 3VSB: +3.36 V (min = +2.98 V, max = +3.63 V) Vbat: +3.36 V (min = +2.70 V, max = +3.30 V) ALARM fan1: 0 RPM (min = 3515 RPM, div = 128) ALARM fan2: 0 RPM (min = 10546 RPM, div = 128) ALARM fan3: 0 RPM (min = 10546 RPM, div = 128) ALARM fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM temp1: +39.0°C (high = -121.0°C, hyst = +9.0°C) ALARM sensor = diode temp2: +39.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode temp3: +127.0°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor cpu0_vid: +2.050 V intrusion0: OK radeon-pci-0100 Adapter: PCI adapter temp1: +70.5°C The fans sensors are detecting 0 RPM and some temperatures are out of range - the ALARMs above but i dont understand it very well. Can someone help out?

  Read the article

• What is the aim of this email? Is this a ping/sping? [closed]

  - by mplungjan

  Hi, I received this spam in my catch-all. As a webmaster of the domain it was sent to, I am really curious what the reason for this mail is. It was sent to a non-existent user "tania" on my domain - here I used mydomain.zzz - what do the sender want to achieve? Since many mail servers have stopped backscattering, not getting a bounce would not mean anything, would it? And if this is off topic, where inb the StackExchange WOULD it be on topic? Delivered-To: [email protected] Received: (qmail 8015 invoked from network); 27 Jan 2011 02:32:47 -0000 Received: from unknown (HELO p3pismtp01-021.prod.phx3.secureserver.net) ([10.6.12.26]) (envelope-sender <[email protected]>) by smtp35.prod.mesa1.secureserver.net (qmail-1.03) with SMTP for <[email protected]>; 27 Jan 2011 02:32:47 -0000 X-IronPort-Anti-Spam-Result: At4FAAlnQE1GVjtCVGdsb2JhbACWXo4gCwEWCA0YJLwyhU8EhRc Received: from mx.dt3ls.com ([70.86.59.66]) by p3pismtp01-021.prod.phx3.secureserver.net with ESMTP; 26 Jan 2011 19:32:47 -0700 Received: from 70.86.59.66 by mx.dt3ls.com (Merak 8.9.1) with ASMTP id JXF39710 for <[email protected]>; Wed, 26 Jan 2011 17:31:10 -0500 Return-Path: [email protected] Status: Message-ID: <20110126173109.4d9d6c3f2b@1c3c> From: "Tech Support" <[email protected]> To: <[email protected]> Subject: Information, as instructed. Date: Wed, 26 Jan 2011 17:31:09 -0500 X-Priority: 3 X-Mailer: General-Mailer v.3 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Quote: I give it to you not that you may remember time, but that you might forget it now and then for a moment and not spend all your breath trying to conquer it. Because no battle is ever won he said. They are not even fought. The field reveals to a man his own folly and despair, and victory is an illusion of philosophers and fools. William Faulkner The Sound and the Fury

  Read the article

• Why are my videos playing speeded up with no audio, but work fine if I log in as a guest?

  - by Martins Kruze

  Since the start of this week I have been experiencing a glitch in the multimedia on my Samsung R518 laptop. I have 2 problems: Videos in every player are speeded up around 2 or 4 times (including youtube.com (both HTML5 and flash variants), any other video on the web and videos on my laptop played by Totem Media Player), exception is VLC player, but 2nd problem does concern even that. There is no sound - simple as that (with or without headphones plugged in). These all problems are now, and has not seen before, I upgraded to Ubuntu 10.10 after it was possible, and from start I didn't have anything from this - it just started in this week. I haven't even putted new software in. I have more or less solved the question (kind of) - I just logged in as a guest - and it all works, but when I make a new user - it does not. Please help me. Some stats below: sudo lshw -c sound *-multimedia description: Audio device product: RV710/730 vendor: ATI Technologies Inc physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:48 memory:cfeec000-cfeeffff *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:47 memory:fc200000-fc203fff sudo lshw -c video *-display description: VGA compatible controller product: M92 LP [Mobility Radeon HD 4300 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:46 memory:d0000000-dfffffff ioport:2000(size=256) memory:cfef0000-cfefffff memory:cfe00000-cfe1ffff

  Read the article

• USB blocks suspend on a Gigabyte GA-890GPA-UD3H with ATI SB700/SB800

  - by poolie

  Following on from question 12397, I'd still like to get suspend working on my Phenom II X6 / GA-890GPA desktop machine running current Maverick. When I run pmi action suspend the machine doesn't crash, but it also doesn't suspend. The kernel logs show: PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.02 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) pm_op(): usb_dev_suspend+0x0/0x20 returns -2 PM: Device usb8 failed to suspend async: error -2 PM: Some devices failed to suspend PM: resume of devices complete after 0.430 msecs PM: resume devices took 0.000 seconds PM: Finishing wakeup. Restarting tasks ... done. PM: Syncing filesystems ... I've tried disconnecting all the USB devices, and then connecting in to run pmi over ssh, and I get the same failure. With everything unplugged, I see the following usb devices: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub and lspci shows the physical devices are: 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) Booting with no_console_suspend makes no difference.

  Read the article

• Ubuntu 13.10 No Sound

  - by spiersie

  I was running 13.04 since last monday and just today i upgraded to 13.10, in both of these version i have not managed to get my sound working. I have gone into alsamixer and disabled auto mute and the volumes are up. However if somebody thinks they can help me fix this i will gladly follow any steps. Please lay specifically any terminal commands you need me to do to either show specs or solve the problem as i am not fluent with the linux commands, this desktop being my first system to run linux, starting last monday. blake@Blake-Ubuntu-PC:~$ lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: ASUSTeK Computer Inc. Device 8526 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at fef44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: ASUSTeK Computer Inc. Device 8445 Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at fef40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)

  Read the article

• Wireless doesn't work after installing 11.10

  - by Ingram

  I just did a fresh install of 11.10 32 bit and I can't get my wireless to work. I installed the drivers the Broadcom STA wireless drivers through additional drivers and rebooted, but it still doesn't see any wireless networks Did something change in 11.10 that makes the wireless card not work anymore? I was using 10.10 before, and it worked fine. Do I need to go back to 10.10? sudo lshw -C network [sudo] password for user1: *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 10 serial: 00:1f:16:be:55:ff size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=sb v2.19 ip=192.168.0.70 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:43 memory:f0300000-f030ffff *-network UNCLAIMED description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:09:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0400000-f0403fff

  Read the article

• "Enable Wireless" option is disabled in network settings

  - by silenTK

  I'm using Ubuntu 11.10 (dual booted with Windows 7) but I'm unable to access Internet wireless even though I can do so on Windows 7. The output for rfkill list all is given below: rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no The output for sudo lshw -C network *-network DISABLED is: description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: 11:11:11:11:11:11 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:16 memory:c2500000-c2503fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 05 serial: 22:22:22:22:22:22 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff Broadcom STA wireless driver is installed, activated, and currently in use. My laptop is a HP-Pavilion-g6-1004tx. My hardware switch is on. Enable Wireless option is also disabled in network settings.

  Read the article

• Sound not working after installing PCI video card and then removing it

  - by bakhshu

  I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

  Read the article

• How can I avoid a 302 for Fetch as Bot?

  - by CookieMonster

  I originally posted this on Stackoverflow, but I believe here is a better place to ask. My web application is very similar to notepad.cc which redirects to a randomly generated URL upon access, e.g. http://myapp.com/roTr94h4Gd. (Please note that notepad.cc is not my site.) Probably because of this redirect feature, when I do "fetch as Google" or "fetch as Bingbot", I get a 302 and no html content. Not even a <html></html> tag. HTTP/1.1 302 Moved Temporarily Server: nginx/1.4.1 Date: Tue, 01 Oct 2013 04:37:37 GMT Content-Type: text/html Transfer-Encoding: chunked Connection: keep-alive X-Powered-By: PHP/5.4.17-1~dotdeb.1 Set-Cookie: PHPSESSID=vp99q5e5t5810e3bnnnvi6sfo2; expires=Thu, 03-Oct-2013 04:37:37 GMT; path=/ Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Location: /roTr94h4Gd How should I avoid 302 in this case? I suppose I could modify my site to prevent the redirect, but it is a necessary feature of my web app to generate a random URL on each access. I added <meta name="fragment" content="!"> tag into my index page and set it to return a static snapshot of my page when the flag is set. But this still returns a 302. I also added a header to return 200 before redirecting, but this had no effect, either. Could someone tell me a good suggestion to solve this problem?

  Read the article

• wireless card not detected

  - by user281219

  i have a old HP Compaq NX6125 with a new lunbuntu 14.04 32 bits install , but the wireless card is not working I have already done this steps and the wireless leds on the laptop are on but can't see any where the wireless interface , cloud`t do the last two steps . sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer b43-fwcutter Then Reboot And you need to activate the card from settings/network/wireless make it ON After this search for wireless icon at the task bar and look for your wifi. lshw -class network: *-network:0 description: Ethernet interface product: NetXtreme BCM5788 Gigabit Ethernet vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:02:01.0 logical name: eth0 version: 03 serial: 00:0f:b0:f7:d1:0f size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.134 duplex=full firmware=5788-v3.26 ip=192.168.1.120 latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:23 memory:d0000000-d000ffff *-network:1 description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:22 memory:d0010000-d0011fff *-network description: Wireless interface physical id: 1 logical name: wlan2 serial: 00:14:a5:77:9e:10 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.13.0-29-generic firmware=666.2 link=no multicast=yes wireless=IEEE 802.11bg

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >