Search Results

Search found 14364 results on 575 pages for 'download games'.

Page 39/575 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• All downloads being interrupted

  - by Jake

  System: Windows 7 Professional 64bit. 8GB RAM, Intel i5-2400 CPU, +300GB free on the hard drive. AVG Internet Security 2012 (enabled & disabled, with firewall enabled and disabled - no effect for either). This computer is less than a year old. Network: This problem is occurring on a single computer on a network with multiple computers. The router is a Motorola Netopia 3347-02 (DSL Modem/Wireless Router combined). The computer is plugged in directly to the modem, other computers are using the wireless successfully. The router has been reset. The only thing odd about the connection between the router and computer is that it is configured to allow RDP through, so it is assigned a static IP by the router and port forwarding is enabled for port 3389. Also, though I doubt it matters, a second wireless router is active behind this router providing a second network that some computers in the area use without issues. Details: All downloads initiated on this specific computer eventually fail, this includes streaming from youtube, specialized downloads (itunes), downloads from websites, FTP downloads, etc. Failure occurs with all browsers, but in chrome this is the process it takes: 1) Download begins normally, 2) At some point between (observed) 7MBs and 229MBs the download stops progressing (at this point, if watching chrome's task manager, you can see the network activity for the downloading tab drop to 0kps), 3) for some time the download sits there still attempting to complete, but will eventually display "123,049,871/0 B, Interrupted" (where the number is whatever it actually got to). The file I am using to test this is a very large .zip file located on a server I control, but the problem seems to occur on any site. The amount downloaded is completely random, and seems to be more time-based than anything (if I start a download immediately after the last one fails, it tends to get further than the last one). Small files can get through for this reason, though they can fail as well. In a test where I simultaneously downloaded the same file via HTTP (chrome) and FTP (windows explorer), both downloads failed at the same instant, though explorer displayed "Connection timed out" several minutes before chrome finally showed the download as interrupted. Other things I have tried based on advice given to people with similar/identical problems: Setting my MTU to 1492 (as described here: http://blog.thecompwiz.com/2011/08/networking-issues.html) Disabling write caching to the hard drive storing the download on an external device successfully transmitted +1GB file from one computer on the same network to this computer disabling indexing in the folder the download was being stored in disabling all security software checked to make sure all drivers were up to date read about 50 accounts with nearly exact descriptions of what I'm experiencing, none of which had a solution given Running Processes: Image Name PID Session Name Session# Mem Usage ========================= ======== ================ =========== ============ System Idle Process 0 Services 0 24 K System 4 Services 0 104,836 K smss.exe 332 Services 0 1,276 K csrss.exe 764 Services 0 5,060 K wininit.exe 820 Services 0 4,748 K csrss.exe 844 Console 1 23,764 K services.exe 876 Services 0 11,856 K lsass.exe 892 Services 0 14,420 K lsm.exe 900 Services 0 7,820 K winlogon.exe 944 Console 1 7,716 K svchost.exe 428 Services 0 12,744 K svchost.exe 796 Services 0 12,240 K svchost.exe 1036 Services 0 22,372 K svchost.exe 1084 Services 0 174,132 K svchost.exe 1112 Services 0 56,144 K svchost.exe 1288 Services 0 18,640 K svchost.exe 1404 Services 0 29,616 K spoolsv.exe 1576 Services 0 25,924 K svchost.exe 1616 Services 0 12,788 K AppleMobileDeviceService. 1728 Services 0 9,796 K avgwdsvc.exe 1820 Services 0 8,268 K mDNSResponder.exe 1844 Services 0 5,832 K w3dbsmgr.exe 1108 Services 0 43,760 K QBCFMonitorService.exe 1336 Services 0 16,408 K svchost.exe 2404 Services 0 28,240 K taskhost.exe 3020 Console 1 12,372 K dwm.exe 2280 Console 1 5,968 K explorer.exe 2964 Console 1 152,476 K WUDFHost.exe 3316 Services 0 6,740 K svchost.exe 3408 Services 0 5,556 K RAVCpl64.exe 3684 Console 1 13,864 K igfxtray.exe 3700 Console 1 7,804 K hkcmd.exe 3772 Console 1 7,868 K igfxpers.exe 3788 Console 1 10,940 K sidebar.exe 3836 Console 1 84,400 K chrome.exe 3964 Console 1 19,640 K pptd40nt.exe 4068 Console 1 5,156 K acrotray.exe 3908 Console 1 14,676 K avgtray.exe 3872 Console 1 9,508 K jusched.exe 4076 Console 1 4,412 K iTunesHelper.exe 1532 Console 1 87,308 K SearchIndexer.exe 3492 Services 0 36,948 K iPodService.exe 4136 Services 0 7,944 K BrccMCtl.exe 4276 Console 1 18,132 K splwow64.exe 4380 Console 1 32,600 K qbupdate.exe 4836 Console 1 24,236 K svchost.exe 4288 Services 0 20,700 K wmpnetwk.exe 3112 Services 0 9,516 K FNPLicensingService.exe 5248 Services 0 5,852 K QBW32.EXE 5508 Console 1 127,068 K QBDBMgrN.exe 5600 Services 0 42,252 K EXCEL.EXE 2512 Console 1 99,100 K LMS.exe 3188 Services 0 5,616 K UNS.exe 1600 Services 0 7,308 K axlbridge.exe 5260 Console 1 5,132 K chrome.exe 5888 Console 1 200,336 K chrome.exe 3536 Console 1 26,076 K chrome.exe 1952 Console 1 20,168 K chrome.exe 4596 Console 1 24,696 K chrome.exe 4292 Console 1 48,096 K chrome.exe 2796 Console 1 23,520 K Acrobat.exe 1240 Console 1 87,252 K 123w.exe 4892 Console 1 22,728 K calc.exe 1700 Console 1 12,636 K chrome.exe 1328 Console 1 28,888 K chrome.exe 3696 Console 1 47,012 K rundll32.exe 6320 Console 1 7,104 K chrome.exe 4928 Console 1 44,248 K AVGIDSAgent.exe 260 Services 0 12,940 K avgfws.exe 6052 Services 0 26,912 K avgnsa.exe 5064 Services 0 2,496 K avgrsa.exe 3088 Services 0 2,200 K avgcsrva.exe 2596 Services 0 380 K avgcsrva.exe 6948 Services 0 408 K StikyNot.exe 452 Console 1 14,772 K chrome.exe 4580 Console 1 28,200 K chrome.exe 4016 Console 1 57,756 K svchost.exe 7140 Services 0 4,500 K chrome.exe 6264 Console 1 56,824 K chrome.exe 7008 Console 1 56,896 K chrome.exe 2224 Console 1 38,032 K taskhost.exe 612 Console 1 7,228 K chrome.exe 6000 Console 1 10,928 K chrome.exe 2568 Console 1 43,052 K chrome.exe 272 Console 1 75,988 K chrome.exe 7328 Console 1 53,240 K PaprPort.exe 7976 Console 1 137,152 K pplinks.exe 7500 Console 1 14,052 K ppscanmg.exe 5744 Console 1 18,996 K taskeng.exe 7388 Console 1 6,308 K SearchProtocolHost.exe 8024 Services 0 8,804 K SearchFilterHost.exe 7232 Services 0 7,848 K chrome.exe 8016 Console 1 37,440 K cmd.exe 7692 Console 1 3,096 K conhost.exe 7516 Console 1 5,872 K tasklist.exe 8160 Console 1 5,772 K WmiPrvSE.exe 7684 Services 0 6,400 K Any help with this would be greatly appreciated, I've been beating my head against a wall over this all day. This computer serves dual purpose as the main company document server and the Owner's work computer, it's fairly important it be fully functional and I cannot figure this out.

  Read the article

• SQL SERVER – Import CSV into Database – Transferring File Content into a Database Table using CSVexpress

  - by pinaldave

  One of the most common data integration tasks I run into is a desire to move data from a file into a database table.  Generally the user is familiar with his data, the structure of the file, and the database table, but is unfamiliar with data integration tools and therefore views this task as something that is difficult.  What these users really need is a point and click approach that minimizes the learning curve for the data integration tool.  This is what CSVexpress (www.CSVexpress.com) is all about!  It is based on expressor Studio, a data integration tool I’ve been reviewing over the last several months. With CSVexpress, moving data between data sources can be as simple as providing the database connection details, describing the structure of the incoming and outgoing data and then connecting two pre-programmed operators.   There’s no need to learn the intricacies of the data integration tool or to write code.  Let’s look at an example. Suppose I have a comma separated value data file with data similar to the following, which is a listing of terminated employees that includes their hiring and termination date, department, job description, and final salary. EMP_ID,STRT_DATE,END_DATE,JOB_ID,DEPT_ID,SALARY 102,13-JAN-93,24-JUL-98 17:00,Programmer,60,"$85,000" 101,21-SEP-89,27-OCT-93 17:00,Account Representative,110,"$65,000" 103,28-OCT-93,15-MAR-97 17:00,Account Manager,110,"$75,000" 304,17-FEB-96,19-DEC-99 17:00,Marketing,20,"$45,000" 333,24-MAR-98,31-DEC-99 17:00,Data Entry Clerk,50,"$35,000" 100,17-SEP-87,17-JUN-93 17:00,Administrative Assistant,90,"$40,000" 334,24-MAR-98,31-DEC-98 17:00,Sales Representative,80,"$40,000" 400,01-JAN-99,31-DEC-99 17:00,Sales Manager,80,"$55,000" Notice the concise format used for the date values, the fact that the termination date includes both date and time information, and that the salary is clearly identified as money by the dollar sign and digit grouping.  In moving this data to a database table I want to express the dates using a format that includes the century since it’s obvious that this listing could include employees who left the company in both the 20th and 21st centuries, and I want the salary to be stored as a decimal value without the currency symbol and grouping character.  Most data integration tools would require coding within a transformation operation to effect these changes, but not expressor Studio.  Directives for these modifications are included in the description of the incoming data. Besides starting the expressor Studio tool and opening a project, the first step is to create connection artifacts, which describe to expressor where data is stored.  For this example, two connection artifacts are required: a file connection, which encapsulates the file system location of my file; and a database connection, which encapsulates the database connection information.  With expressor Studio, I use wizards to create these artifacts. First click New Connection > File Connection in the Home tab of expressor Studio’s ribbon bar, which starts the File Connection wizard.  In the first window, I enter the path to the directory that contains the input file.  Note that the file connection artifact only specifies the file system location, not the name of the file. Then I click Next and enter a meaningful name for this connection artifact; clicking Finish closes the wizard and saves the artifact. To create the Database Connection artifact, I must know the location of, or instance name, of the target database and have the credentials of an account with sufficient privileges to write to the target table.  To use expressor Studio’s features to the fullest, this account should also have the authority to create a table. I click the New Connection > Database Connection in the Home tab of expressor Studio’s ribbon bar, which starts the Database Connection wizard.  expressor Studio includes high-performance drivers for many relational database management systems, so I can simply make a selection from the “Supplied database drivers” drop down control.  If my desired RDBMS isn’t listed, I can optionally use an existing ODBC DSN by selecting the “Existing DSN” radio button. In the following window, I enter the connection details.  With Microsoft SQL Server, I may choose to use Windows Authentication rather than rather than account credentials.  After clicking Next, I enter a meaningful name for this connection artifact and clicking Finish closes the wizard and saves the artifact. Now I create a schema artifact, which describes the structure of the file data.  When expressor reads a file, all data fields are typed as strings.  In some use cases this may be exactly what is needed and there is no need to edit the schema artifact.  But in this example, editing the schema artifact will be used to specify how the data should be transformed; that is, reformat the dates to include century designations, change the employee and job ID’s to integers, and convert the salary to a decimal value. Again a wizard is used to create the schema artifact.  I click New Schema > Delimited Schema in the Home tab of expressor Studio’s ribbon bar, which starts the Database Connection wizard.  In the first window, I click Get Data from File, which then displays a listing of the file connections in the project.  When I click on the file connection I previously created, a browse window opens to this file system location; I then select the file and click Open, which imports 10 lines from the file into the wizard. I now view the file’s content and confirm that the appropriate delimiter characters are selected in the “Field Delimiter” and “Record Delimiter” drop down controls; then I click Next. Since the input file includes a header row, I can easily indicate that fields in the file should be identified through the corresponding header value by clicking “Set All Names from Selected Row. “ Alternatively, I could enter a different identifier into the Field Details > Name text box.  I click Next and enter a meaningful name for this schema artifact; clicking Finish closes the wizard and saves the artifact. Now I open the schema artifact in the schema editor.  When I first view the schema’s content, I note that the types of all attributes in the Semantic Type (the right-hand panel) are strings and that the attribute names are the same as the field names in the data file.  To change an attribute’s name and type, I highlight the attribute and click Edit in the Attributes grouping on the Schema > Edit tab of the editor’s ribbon bar.  This opens the Edit Attribute window; I can change the attribute name and select the desired type from the “Data type” drop down control.  In this example, I change the name of each attribute to the name of the corresponding database table column (EmployeeID, StartingDate, TerminationDate, JobDescription, DepartmentID, and FinalSalary).  Then for the EmployeeID and DepartmentID attributes, I select Integer as the data type, for the StartingDate and TerminationDate attributes, I select Datetime as the data type, and for the FinalSalary attribute, I select the Decimal type. But I can do much more in the schema editor.  For the datetime attributes, I can set a constraint that ensures that the data adheres to some predetermined specifications; a starting date must be later than January 1, 1980 (the date on which the company began operations) and a termination date must be earlier than 11:59 PM on December 31, 1999.  I simply select the appropriate constraint and enter the value (1980-01-01 00:00 as the starting date and 1999-12-31 11:59 as the termination date). As a last step in setting up these datetime conversions, I edit the mapping, describing the format of each datetime type in the source file. I highlight the mapping line for the StartingDate attribute and click Edit Mapping in the Mappings grouping on the Schema > Edit tab of the editor’s ribbon bar.  This opens the Edit Mapping window in which I either enter, or select, a format that describes how the datetime values are represented in the file.  Note the use of Y01 as the syntax for the year.  This syntax is the indicator to expressor Studio to derive the century by setting any year later than 01 to the 20th century and any year before 01 to the 21st century.  As each datetime value is read from the file, the year values are transformed into century and year values. For the TerminationDate attribute, my format also indicates that the datetime value includes hours and minutes. And now to the Salary attribute. I open its mapping and in the Edit Mapping window select the Currency tab and the “Use currency” check box.  This indicates that the file data will include the dollar sign (or in Europe the Pound or Euro sign), which should be removed. And on the Grouping tab, I select the “Use grouping” checkbox and enter 3 into the “Group size” text box, a comma into the “Grouping character” text box, and a decimal point into the “Decimal separator” character text box. These entries allow the string to be properly converted into a decimal value. By making these entries into the schema that describes my input file, I’ve specified how I want the data transformed prior to writing to the database table and completely removed the requirement for coding within the data integration application itself. Assembling the data integration application is simple.  Onto the canvas I drag the Read File and Write Table operators, connecting the output of the Read File operator to the input of the Write Table operator. Next, I select the Read File operator and its Properties panel opens on the right-hand side of expressor Studio.  For each property, I can select an appropriate entry from the corresponding drop down control.  Clicking on the button to the right of the “File name” text box opens the file system location specified in the file connection artifact, allowing me to select the appropriate input file.  I indicate also that the first row in the file, the header row, should be skipped, and that any record that fails one of the datetime constraints should be skipped. I then select the Write Table operator and in its Properties panel specify the database connection, normal for the “Mode,” and the “Truncate” and “Create Missing Table” options.  If my target table does not yet exist, expressor will create the table using the information encapsulated in the schema artifact assigned to the operator. The last task needed to complete the application is to create the schema artifact used by the Write Table operator.  This is extremely easy as another wizard is capable of using the schema artifact assigned to the Read Table operator to create a schema artifact for the Write Table operator.  In the Write Table Properties panel, I click the drop down control to the right of the “Schema” property and select “New Table Schema from Upstream Output…” from the drop down menu. The wizard first displays the table description and in its second screen asks me to select the database connection artifact that specifies the RDBMS in which the target table will exist.  The wizard then connects to the RDBMS and retrieves a list of database schemas from which I make a selection.  The fourth screen gives me the opportunity to fine tune the table’s description.  In this example, I set the width of the JobDescription column to a maximum of 40 characters and select money as the type of the LastSalary column.  I also provide the name for the table. This completes development of the application.  The entire application was created through the use of wizards and the required data transformations specified through simple constraints and specifications rather than through coding.  To develop this application, I only needed a basic understanding of expressor Studio, a level of expertise that can be gained by working through a few introductory tutorials.  expressor Studio is as close to a point and click data integration tool as one could want and I urge you to try this product if you have a need to move data between files or from files to database tables. Check out CSVexpress in more detail.  It offers a few basic video tutorials and a preview of expressor Studio 3.5, which will support the reading and writing of data into Salesforce.com. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Games on windows 8 in bootcamp lag even on lowest graphics

  - by Jackson Gariety

  I've been playing Crysis 2 and Skyrim on my Retina MacBookPro (10,1) for months now. The two games used to run super smoothly even on nearly maxed out settings. This laptop has an Nvidia GeForce GT 650M graphics card inside, it runs great. But I recently replaced my Windows 8 consumer preview with the retail copy, and since then, 3D games lag in this odd way, no matter what the graphics settings. Every second Skyrim and Crysis alternates between running smoothly and lagging. It's a cyclical lag that comes and goes like clockwork. I can turn the graphics down to 800x600 with no antialiasing and low texture quality, and it runs much smoother on the "up" motion of the cycle, but every second it moves back into this lag spike. I've tried installing beta graphics drivers, re installing the operating system, re installing the bootcamp support software, and freeing up space (I have about 20 GB free). I can't figure out what suddenly caused this other than some obscure difference between the consumer preview and the retail version. What can I try? Is my video card failing? Are there some other drivers I can install? This isn't normal lag from maxing out the card, it

  Read the article

• Java games applet not connecting to Yahoo

  - by Steve

  Hi. I am trying to play a Y! game which use a java applet. The applet displays the message: Alert. Unable to connect to server. One of four things could have caused this: 1) You are behind a firewall. 2) You are not connected to the internet. 3) The games server is down. 4) You have a stale page in your cache. I have added an exception to the Windows firewall for java.exe. I am obviously connected to the Internet okay. The games server is not down when I am at home. I doubt it is down when I am at work. I have never successfully loaded this page before, so I doubt I have a stale page in cache. Could it be the corporate firewall? Nothing else in my web browser has been blocked before. Maybe the java applet connects on a different port to the browser. What should I test?

  Read the article

• HTML Javascript Hidden Object or Photo Hunt Game

  - by PeteT

  Is anyone aware of any example photo hunt/hidden object games either in HTML and Javascript or flash if necessary? I am having trouble finding one, I may be using the wrong words to search. Photo hunt being like the wheres wally/waldo books where you look for wally in a complex image until you find him. So if it were played on screen you would press the location of wally and it would either be correct or wrong, possibly timed. I am hoping to find one where you can just load in your own photos and specify some co-ordinates that match where the hidden object is. A spot the difference example may be useful as a starting point but I haven't found an example of either that is web based yet.

  Read the article

• A Six Step Plan for Introducing Kids to Tabletop RPGs

  - by Jason Fitzpatrick

  Introducing your kids, nieces and nephews, or other budding geeks to your geeky hobbies like role-playing games can be tricky. This handy plan lays out some simple steps to make RPGs fun for younger kids. Courtesy of Ryan Carlson over at Geek Dad, the six-step primer covers topics like simplifying the rules, varying task difficulty, fun character creation ideas, and ensuring there are adequate opportunities for in-game success. Hit up the link below for the full guide. Have a RPG-introduction success story or tip to share? Add to the conversation in the comments below. Running an Introductory Roleplaying Game for Kids [GeekDad] How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

  Read the article

• Little Wheel Is An Atmospheric and Engaging Point-and-Click Adventure

  - by Jason Fitzpatrick

  If you’re a fan of the resurgence of highly stylized and atmospheric adventure games–such as Spirit, World of Goo, and the like–you’ll definitely want to check out this well executed, free, and more than a little bit charming browser-based game. Little Wheel is set in a world of robots where, 10,000 years ago, a terrible accident at the central power plant left all the robots without power. The entire robot world went into a deep sleep and now, thanks to a freak lightning strike, one little robot has woken up. Your job, as that little robot, is to navigate the world of Little Wheel and help bring it back to life. Hit up the link below to play the game for free–the quality of the visual and audio design make going full screen and turning the speakers on a must. Little Wheel [via Freeware Genuis] How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

  Read the article

• Install a Wii Game Loader for Easy Backups and Fast Load Times

  - by Jason Fitzpatrick

  We’ve shown you how to hack your Wii for homebrew software and DVD playback as well as how to safeguard and supercharge your Wii. Now we’re taking a peek at Wii game loaders so you can backup and play your Wii games from an external HDD. Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Lord of the Rings Movie Parody Double Feature [Video] Turn a Webpage into an Asteroids-Styled Shooting Game in Opera Dolphin Browser Mini Leaves Beta; Sports New GUI, Easy Bookmarking, and More Updated Google Goggles Scans Faster; Solves Sudoku Puzzles Snowy Castle Retreat in the Mountains Wallpaper Fix TV Show Sorting Issues on iOS Devices

  Read the article

• Need material for character anatomy in a 2D game. Spartan Like, See Picture

  - by Edwin Soho

  I'm creating my art for an 2d based IOS game. I know some basic anatomy as you can see by the picture but I have no idea how I will make draw the pics for animation of the character walking, attacking with his sword and protecting himself with shield. Is there any anatomy reference for 2d game out there, book or anything else? for your information, I did try to find but all of stuff I found are very amateur and incomplete The picture was my attempt of creating a example of the character walking, which I'm not happy with please help, thanks Update: Since I am in a hurry I decided I would copy the anatomy from other 2d games, it is not that clean but at least I wanna be able to start it. The question is still open.

  Read the article

• Generating grammatically correct MUD-style attack descriptions

  - by Extrakun

  I am currently working on a text based game, where the outcome of a combat round goes something like this %attacker% inflicts a serious wound (12 points damage) on %defender% Right now, I just swap %attacker% with the name of the attacker, and %defender% for the name of the defender. However, the description works, but don't read correctly. Since the game is just all text, I don't want to resort to generic descriptions (Such as "You use Attack on Goblin for 5 damage", which arguably solve the problem) How do I generate correct descriptions for cases where %attacker% refers to "You", the player? "You inflicts..." is wrong "Bees", or other plural? I need somehow to know I should prefix the name with a "The " If %attacker% is a generic noun, such as "Goblin", it will read weird as opposed to %attacker% being a name. Compare "Goblin inflicts..." vs. "Aldraic Swordbringer inflicts...." How does text-based games usually resolve such issues?

  Read the article

• Can I hook my xbox up to my Ubuntu PC

  - by Anonymous John

  My old xbox 360 won't eject disks, it makes a sound,but won't open. I want to play games, so I think I could hook it up to my PC running Ubuntu 13.10 64-bit and maybe I could use my PC's DVD drive. Can this work at all, or am I just crazy? There is an HDMI port on the back of my graphics card. If I can't do that, is there any software for Ubuntu that can rip the game off of a CD and put it on a flash drive? I have heard xbmcbuntu works great for gaming, but it doesn't work with my PC.

  Read the article

• The how of a collision engine

  - by JXPheonix

  This is a very, very broad question - what is the general algorithm of how a collision engine works? No code in specific, but rather, just a general idea of how a collision engine does what it does, constantly refreshing the points of an object and comparing it to other objects? (see, I have the general gist of it here.) A collision engine is basically an engine used in games (generally) so that your player (call him Bob), whenever bob moves into a wall, Bob stops, Bob does not walk through the wall. They also generally handle the gravity in a game and environmental things like that.

  Read the article

• How can i change focus when game locks it?

  - by GrizzLy

  I am playing wolfenstein:enemy territory, and if i play it in windowed mode, i can't change focus from game to something else (alt+tab doesnt work). EDIT1: As far as i could try, only ctrl+alt+Fx works (x is one number, for example F1 will switch to terminal). Could i somehow capture this kind of shortcut somewhere on X level and then send it to compiz to change focus (minimize currently focused window)? EDIT2: I found one other way, it works for Wolf:ET, it may help with other games too, if you turn on gameconsole (usually tilde key) game will release mouse lock (in windowed mode).

  Read the article

• Can various browsers be assumed to maintain predictible state accurately in multiplayer online gaming?

  - by Nikos

  With many games it is said that server will assume that clients keep track of the world accurately. Assuming this is true, for a browser based multiplier space invaders game you would only tell the client when new bullets or the players ship moves and everything that behaves in a predetermined manner in the js client. It would be expected that positions would be the same in the browsers. Do you think you could trust browsers to do this? I feel that timings could differ between rendering loops and cause positions to get out of sync and might just get the server to maintain all the positions to make sure.

  Read the article

• Ubuntu - Psychonauts - Camera involentarily listing to the right

  - by James

  I've recently purchased the Humble Bundle V and have been having an absolute riot with the games given. The one problem I'm running into though, is that whenever I launch Psychonauts and run a game, the Camera lists to the right slowly and I can't get it to stop. Strangely enough when I zoom in (with z), it lists to the left. I was wondering if anyone else had this problem and if there was a solution. Maybe it's even the mouse configs I currently have on the laptop that interacts strangely with 3D environments.

  Read the article

• HP Chromebook 14 Crouton = Broken packages

  - by Robin Perry

  I'm completely new and inept with ubuntu. I've recently purchased a chromebook 14 by Hewlett-Packard and today find out how to install Crouton for it. My goal is to be able to use steam on the chromebook for small time-killing games. My issue is that no matter what kind of application I attempt to install, it always tells me it has "broken dependencies" I also tried installing debian versions of "Firefox", "Chrome", "Opera" as well as "Cave Story+" from humble bundle. I've tried to do the sudo apt-get install -f as well as loads of other commands but nothing works What can I do, I can post any specs you need and am ready to use another way to get to steam such as ChrUbuntu if my issue is unfixable

  Read the article

• Ask The Readers: How Do You Find Your Next Game?

  - by Jason Fitzpatrick

  Once upon a time the only place for new video game information was down at the arcade. These days there’s a news source and niche for everyone and every kind of game; where and how do you find your next video game conquest? Word of mouth? App recommendations? Critical reviews? This week we’re interested in lining ourselves up for a little summer fun: tell us all about your tips, tricks, and techniques for finding the real gems in the pile of games that comes out every year. Sound off in the comments and then check back in on Friday for the What You Said roundup. HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux

  Read the article

• Steam overlay doesn't work

  - by TheDarktonik

  Steam overlay doesn't work for me in wine. Yeah, I guess, it's known bug, but some persons say I need to compile wine with right gcc. Some of them just download the latest deb-packaged wine and the overlay works flawlessly for them. I tried to compile wine myself, but it didn't work. Now I have the latest wine installed (ver 1.5.6 from PPA) but this overlay still doesn't work. (My English is not really good:))

  Read the article

• Splice gives blank screen on startup

  - by dpb

  I just installed splice from the humble bundle, and I get a blank screen on startup. I can hear the audio, and if I move my mouse around, I can hear the menu items or something changing. I have an amd radeon HD5800 series. I'm using the fglrx-updates driver on 12.10, fully updated. Any ideas of things to try? Full screen or windowed, I get a blank window. Also, other GL games are running just fine.

  Read the article

• What is realism?

  - by eversor

  Beyond the obvious something that seams real, realism in games is a hard feature to hit. In some cases, things that are completely impossible in real life are seen as realistic by gamers. For instance, in some FPS you can survive being hit by a fair amount of bullets when in real life one is enough, Newton-defying car drifts, etc. So, in some cases, reductions of life-like actions or consequences implies a bigger sense of realism. The root of this pseudo-philosophical question lies in: I am going to create a engine for battles in an online (browser-based) strategic game. Browser-based means that the battle would not be seen. And i do not know how to approach this realism issue.

  Read the article

• How do I make a Java gave without a JFrame?

  - by kullalok

  I am working on an arcade-like game, and so far, I have been using JFrame. All the action occurs in the JFrame basically. However, I've noticed that a lot of games that you install on a computer don't have a frame. When you play them on Windows, the game covers the entire screen (the start bar disappears and you can't access any other application on your computer). I'd like to do that for my game. Is it possible to do so with Java? If so, how would I do this?

  Read the article

• A question about writing a background/automatic/silent downloader/installer for an app in C#.

  - by Mike Webb

  Background: I have a main application that needs to be able to go to the web and download DLL files associated with it (ones that we write, located on our server). It really needs to be able to download these DLL files to the application folder in "C:\Program Files\". In the past I have used System.Net.WebClient to download whatever files I wanted from the web. The Issue I have had a lot of trouble downloading data in the past and saving to files on a user's hard drive. I get many reports of users saying that this does not work and it is generally because of user rights issues in the program. In the cases where it was an issue with program user rights every user could go to the exact file location on the web, download it, and then save it to the right place manually. I want this to work like all the other programs I have seen download/install in this fassion (i.e. Firefox Pluign Updates, Flash Player, JAVA, Adobe Reader, etc). All of these work without a hitch. The Question Is there some code I need to use to give my downloader program special rights to the Program Files folder? Can I even do this? Is there a better class or library that I should use? Is there a different approach to downloading files I should take, such as using threads or something else to download data? Any help here is appreciated. I want to try to stay away from third-party apps/libraries if at all possible, other than Microsoft of course, due to licensing issues, but still send any suggestions my way. Again, other programs seem to have the rights issues and download capability figured out. I want this same capability.

  Read the article

• Providing downloads on ASP.net website

  - by Dave

  I need to provide downloads of large files (upwards of 2 GB) on an ASP.net website. It has been some time since I've done something like this (I've been in the thick-client world for awhile now), and was wondering on current best practices for this. Ideally, I would like: To be able to track download statistics: # of downloads is essential; actual bytes sent would be nice. To provide downloads in a way that "plays nice" with third-party download managers. Many of our users have unreliable internet connections, and being able to resume a download is a must. To allow multiple users to download the same file simultaneously. My download files are not security-sensitive, so providing a direct link ("right-click to download...") is a possibility. Is just providing a direct link sufficient, letting IIS handle it, and then using some log analyzer service (any recommendations?) to compile and report the statistics? Or do I need to intercept the download request, store some info in a database, then send a custom Response? Or is there an ASP.net user control (built-in or third party) that does this? I appreciate all suggestions.

  Read the article

• Detect if Download is Complete

  - by user604138

  I have a very simple and standard PHP force download script. How do I check if/when the download has completed in order to notify the user on the clientside? I don't even need to show the progress in real time, I am only interested in the very specific event: "when the download completes". Based on my research, it seems like it would have to be determined from the serverside as there is noondownloadready event and I don't think it is possible to intercept browser events. So it seems that my best bet would be to compare bytes sent to total bytes with some sort of clientside/severside interaction. How would I go about checking the bytes sent from the server for a PHP forced download? is there some sort of global PHP variable that store these data that I can ping with AJAX? <?php header("Content-Type: video/x-msvideo"); header("Content-Disposition: attachment; filename=\"".basename($realpath)."\";"); ... $chunksize = 1 * (1024 * 1024); // how many bytes per chunk if ($size > $chunksize) { $handle = fopen($realpath, 'rb'); $buffer = ''; while (!feof($handle)) { $buffer = fread($handle, $chunksize); echo $buffer; ob_flush(); flush(); } fclose($handle); } else { readfile($realpath); } exit(); ?> The reason I need this: For the project I am working on, it is required that after the download starts, the page redirects to (or displays) a "please wait while the download completes" page. Then, once it is complete, it should redirect to (or display) a "Your download is complete, thank you" page. I am open to other ideas that would achieve the same result.

  Read the article

• Convert the uploaded files to specific file format which can not download

  - by Avinash

  Hi, I have a problem regarding to prevent download and saving of uploaded files. My users can upload multiple files types like doc, pdf, ppt,etc.... This all file types are easily download if any one have url. So what is the better way to prevent the download of the file. Or i convert the uploaded files to some specific format which can not download easily (e.g flash).. I am running on php and mysql. Thanks Avinash

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >